DocumentCode
885240
Title
Magnets for the German Spallation Source SNQ
Author
Bechstedt, U. ; Haas, H. ; Hacker, U. ; Hardt, A. ; Henn, K. ; Martin, S. ; Wimmer, J.
Author_Institution
SNQ/ABT of the KFA-Juelich P. O. Box 1913 D-5170 Juelich Germany
Volume
32
Issue
5
fYear
1985
Firstpage
3631
Lastpage
3633
Abstract
For the SNQ high energy linac 320 quadrupoles with a gradient of up to 6 T/m and a bore of 80 mm will be used. The design and mechanical layout of a cheap prototype are presented. The coils with a low resistivity and a high filling factor are produced by simply sawing from a forged hollow copper block. Due to radiation exposure no organic materials are used and insulation is established by spacers and distance. Design criteria and layout of the beam line and the tolerances are discussed.
Keywords
Boring; Coils; Conductivity; Copper; Filling; Linear particle accelerator; Magnets; Organic materials; Prototypes; Sawing;
fLanguage
English
Journal_Title
Nuclear Science, IEEE Transactions on
Publisher
ieee
ISSN
0018-9499
Type
jour
DOI
10.1109/TNS.1985.4334450
Filename
4334450
Link To Document