Analog-binary CCD correlator: a VLSI signal processor

Designs of key sections of a 512-stage correlator are discussed. The chip measures nearly 400 by 300 mils and contains all circuits necessary to accept and store a reference code and compare it to a signal. In addition, it contains many support circuits including the clock logic and drivers, code load logic, and TTL-to-MOS converters. Design of the floating-gate tap structure minimizes code-dependent bias, harmonic distortion, and tap-to-tap nonuniformity, while holding power dissipation to 1 mW per tap. Electron-beam lithography was used to produce photomasks with low defect density and tight dimensional tolerances over the array.