DocumentCode
896940
Title
A voltage-mode PWM buck regulator with end-point prediction
Author
Siu, Man ; Mok, Philip K T ; Leung, Ka Nang ; Lam, Yat-Hei ; Ki, Wing-Hung
Author_Institution
Dept. of Electr. & Electron. Eng., Hong Kong Univ. of Sci. & Technol., China
Volume
53
Issue
4
fYear
2006
fDate
4/1/2006 12:00:00 AM
Firstpage
294
Lastpage
298
Abstract
The end-point prediction (EPP) scheme for voltage-mode buck regulators is proposed. Internal nodal voltages of the regulator controller are predicted and set automatically by the proposed algorithms and circuits. The settling time of the regulator can therefore be significantly reduced for faster dynamic responses, even with dominant-pole compensation. Proven experimentally by a voltage-mode buck regulator implemented in a 0.35-μm CMOS technology, the reference-tracking speed using the EPP scheme is faster than the conventional buck regulator by about six times.
Keywords
CMOS integrated circuits; PWM power convertors; network analysis; voltage control; 0.35 micron; CMOS technology; PWM; end point prediction; regulator controller; voltage-mode buck regulators; Automatic voltage control; CMOS technology; Capacitors; Circuits; Frequency; Power supplies; Pulse width modulation; Regulators; Signal to noise ratio; Voltage control; Adaptive supply; buck regulator; dominant-pole frequency compensation; reference tracking;
fLanguage
English
Journal_Title
Circuits and Systems II: Express Briefs, IEEE Transactions on
Publisher
ieee
ISSN
1549-7747
Type
jour
DOI
10.1109/TCSII.2005.862024
Filename
1618900
Link To Document