Title :
Development of technical high-T/sub c/ superconductor wires and tapes
Author :
Tenbrink, J. ; Wilhelm, M. ; Heine, K. ; Krauth, H.
Author_Institution :
Vacuumschmelze GmbH, Hanau, Germany
fDate :
3/1/1993 12:00:00 AM
Abstract :
High-temperature superconductor (HTSC) BiSrCaCuO-based wires and tapes have been produced using oxide dispersion hardened Ag alloys as sheath material. The use of such sheath material results in superior mechanical properties. The 0.1% yield strength R/sub p0.1/ of wires with 50% HTSC volume fraction exceeds 100 MPa and may reach values up to 150 MPa depending on the respective alloy. The thermal shock resistance also is improved very much. This progress in mechanical properties removes a major obstacle towards application of HTSC in magnet technology. Work concentrating on upscaling of wire production and especially on improving homogeneity is presented. It is shown that filamentization of Bi-2212 wires may lead to improved critical current densities compared to monofilamentary wires.<>
Keywords :
bismuth compounds; calcium compounds; critical current density (superconductivity); high-temperature superconductors; silver; strontium compounds; superconducting transition temperature; thermal shock; yield strength; Ag sheathed BiSrCaCuO; BiSrCaCuO-Ag; HTSC; critical current densities; mechanical properties; tapes; technical high-T/sub c/ superconductor wires; thermal shock resistance; yield strength; Calcination; Critical current density; Magnetic flux; Mechanical factors; Powders; Silver; Superconducting filaments and wires; Superconducting films; Superconducting magnets; Thermal resistance;
Journal_Title :
Applied Superconductivity, IEEE Transactions on
