Low-noise high-T/sub c/ DC SQUIDs at 77 K

Author

Dilorio, M.S. ; Yoshizumi, S. ; Yang, K.-Y. ; Maung, M. ; Zhang, J. ; Power, B.

Author_Institution

Biomagnetic Technol., San Diego, CA, USA

Volume

3

Issue

1

fYear

1993

fDate

3/1/1993 12:00:00 AM

Firstpage

2011

Lastpage

2017

Abstract

Low-noise DC superconducting quantum interference devices (SQUIDs) have been fabricated using a reproducible superconductor-normal metal-superconductor (SNS) step-edge technique. The superconductor is YBa/sub 2/Cu/sub 3/O/sub 7-x/ and the normal metal is either Ag or an Ag-Au alloy. At 77 K, the energy sensitivity for the SQUIDs with the smallest inductance, L=12 pH, is below 9*10/sup -30/ J/Hz at 1 Hz. The energy sensitivity of SQUIDs with L=70 pH is 5*10/sup -29/ J/Hz at 1 Hz. These measured noise values are sufficient for many practical applications. The larger SQUID inductance is also adequate to permit coupling to multiturn input coils. Thin-film input coils with as many as 30 turns have been developed. Critical current densities for the multiturn coils routinely exceed 10/sup 6/ A/cm/sup 2/ at 77 K.<>

Keywords

SQUIDs; barium compounds; electron device noise; high-temperature superconductors; random noise; yttrium compounds; 1 Hz; 77 K; Ag; AgAu; DC SQUIDs; HTSC; YBa/sub 2/Cu/sub 3/O/sub 7-x/; coupling to multiturn input coils; critical current densities; energy sensitivity; low noise; Coils; Copper alloys; Energy measurement; Inductance measurement; Interference; Noise measurement; SQUIDs; Superconducting device noise; Superconducting devices; Superconducting materials;

fLanguage

English

Journal_Title

Applied Superconductivity, IEEE Transactions on

Publisher

ieee

ISSN

1051-8223

Type

jour

DOI

10.1109/77.233462

Filename

233462