DocumentCode
9668
Title
Design of a Vernier Machine With PM on Both Sides of Rotor and Stator
Author
Dae Kyu Jang ; Jung Hwan Chang
Author_Institution
Electr. Eng. Dept., Dong-A Univ., Busan, South Korea
Volume
50
Issue
2
fYear
2014
fDate
Feb. 2014
Firstpage
877
Lastpage
880
Abstract
This paper proposes a new type of vernier machine with permanent magnets (PMs) on both sides of rotor and stator. The rotor is of the flux concentrating structure and the stator has also PMs between the flux modulation poles. Compared with the other types of vernier machine, the proposed model has a huge increase in the induced voltage and developed torque at the same size. This shows the possibility of the new suggested machine to the direct-drive applications such as wind-power generators and in-wheel motors.
Keywords
magnetic flux; permanent magnet motors; rotors; stators; flux modulation poles; in-wheel motors; permanent magnets; rotor; stator; vernier machine design; wind-power generators; Atmospheric modeling; Load modeling; Magnetic flux; Rotors; Stator windings; Torque; Direct drive; flux modulation; magnetic gearing effect; vernier machine;
fLanguage
English
Journal_Title
Magnetics, IEEE Transactions on
Publisher
ieee
ISSN
0018-9464
Type
jour
DOI
10.1109/TMAG.2013.2284509
Filename
6749216
Link To Document