• DocumentCode
    970530
  • Title

    Engineering magnetic properties of Fe-Ni-B amorphous alloys

  • Author

    Luborsky, Fred E. ; Walter, John L. ; Liebermann, Howard H.

  • Author_Institution
    General Electric Corporate Research and Development Center, Schenectady, NY, USA
  • Volume
    15
  • Issue
    1
  • fYear
    1979
  • fDate
    1/1/1979 12:00:00 AM
  • Firstpage
    909
  • Lastpage
    911
  • Abstract
    Amorphous alloys in the series (FexNi1-x)80B20were prepared by melt spinning with 20 < x < 80<. Losses and permeabilities are reported for frequencies from 100 Hz to 100 kHz. The as-wound toroids showed an increase in losses and a decrease in permeability with increasing x, consistent with the increase in magnetostriction observed with increasing x. After stress relief annealing of the toroids, maximum losses were observed at x = 75. This composition corresponds to the composition at which the magnetic anneal anisotropy is maximum.
  • Keywords
    Amorphous magnetic materials/devices; Amorphous materials; Annealing; Frequency; Iron alloys; Magnetic properties; Magnetostriction; Nickel alloys; Permeability; Spinning; Stress;
  • fLanguage
    English
  • Journal_Title
    Magnetics, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9464
  • Type

    jour

  • DOI
    10.1109/TMAG.1979.1060224
  • Filename
    1060224
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=970530