<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modelling and optimisation of wire-and-tube condenser
2
Modelling and optimising of physicochemical features of walnut-oil beverage emulsions by implementation of response surface methodology: Effect of preparation conditions on emulsion stability
3
Modelling and optimization of a continuous stirred tank reactor with feedback control and pulse feeding
4
Modelling and optimization of a low-pressure DC glow discharge in stable regime
5
Modelling and optimization of a passive structural control design for a spar-type floating wind turbine
6
Modelling and optimization of a-Si:H solar cells with ZnO:Al back reflector
7
Modelling and optimization of average travel time for a metro line by simulation and response surface methodology
8
Modelling and Optimization of Channel Allocation for Power Line Communications Access Networks in the Presence of In-Line and InSpace Interference
9
Modelling and optimization of CO2 abatement strategies
10
Modelling and optimization of combined cycle power plant based on exergoeconomic and environmental analyses
11
Modelling and optimization of cyanidation process. A chemometric approach by regression analysis Original Research Article
12
Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM)
13
Modelling and optimization of digestion efficiency of bauxite in Bayer process: Iran Alumina company
14
Modelling and optimization of drying variables in thin layer drying of parboiled paddy Original Research Article
15
Modelling and optimization of ethyl butyrate production catalysed by Rhizopus oryzae lipase Original Research Article
16
Modelling and optimization of fluid dispensing for electronic packaging using neural fuzzy networks and genetic algorithms
17
Modelling and optimization of fluid dispensing for electronic packaging using neural fuzzy networks and genetic algorithms
18
Modelling and Optimization of Fluid Frictional Torque in a Single Stage Centrifugal Pump with a Vaned Diffuser Based on RSM, ANN and Desirability Function
19
Modelling and Optimization of Homogenous Photo-Fenton Degradation of Rhodamine B by Response Surface Methodology and Artificial Neural Network
20
Modelling and optimization of IR cell devoted to in situ and operando characterization of catalysts
21
Modelling and optimization of laminated adaptive shells of revolution
22
Modelling and optimization of organic Rankine cycle based on a small-scale radial inflow turbine
23
Modelling and Optimization of Photocatalytic Degradation of Naphthalene using ZnO-ZnFe2O4 Composite
24
Modelling and optimization of photocatalytic mineralization of acetaminophen using ZnFe2O4-TiO2nanocomposite prepared via microwave assisted combustion method
25
Modelling and optimization of proof testing policies for safety instrumented systems
26
Modelling and optimization of proof testing policies for safety instrumented systems
27
Modelling and optimization of reactant gas transport in a PEM fuel cell with a transverse pin fin insert in channel flow
28
Modelling and optimization of residential electricity load under stochastic demand
29
Modelling and optimization of robotic manipulator mechanism for computed tomography guided medical procedure
30
Modelling and optimization of sails
31
Modelling and optimization of supercritical CO2 extraction of St. Johnʹs Wort (Hypericum perforatum L.) using genetic algorithm
32
Modelling and optimization of the firing zone of a tunnel kiln to predict the optimal feed locations and mass fluxes of the fuel and secondary air
33
Modelling and optimization of the separation of steroids eluted with a micellar mobile phase of sodium dodecyl sulphate containing acetonitrile
34
Modelling and Optimization of Toroidal Continuously Variable Transmission in ECE Driving Cycle
35
Modelling and optimization of two-phase ejectors for cooling systems
36
Modelling and optimizing imperfect maintenance of coatings on steel structures
37
Modelling and optimizing sequential imperfect preventive maintenance
38
Modelling and optimizing sequential imperfect preventive maintenance
39
Modelling and parameter estimation of ultra-dispersed in situ catalytic upgrading experiments in a batch reactor
40
Modelling and parametric analysis of heat and mass transfer performance of a hybrid liquid desiccant absorber
41
Modelling and parametric study of modular undulating fin rays for fish robots
42
Modelling and Pareto optimization of heat transfer and flow coefficients in microchannels using GMDH type neural networks and genetic algorithms
43
Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm
44
Modelling and Passivity Based Control of switched systems from bond graph formalism: Application to multicellular converters
45
Modelling and pathway identification involving the transport mechanism of a complex metabolic system in batch culture
46
Modelling and performance analysis of a regenerative solar desalination unit
47
Modelling and performance analysis of an adaptive state-transition approach for power saving in Bluetooth
48
Modelling and performance analysis of an integrated plasma gasification combined cycle (IPGCC) power plant
49
Modelling and performance analysis of multi-hop ad hoc networks
50
Modelling and performance analysis of the BVP M-80A hybrid drive
51
Modelling and performance evaluation of the multi-tokens and the circulating multisequencer scheduling algorithms in a real-time distributed transactional system
52
Modelling and performance maximization of an integrated automated guided vehicle system using coloured Petri net and response surface methods
53
Modelling and performance of fixed-speed induction generators in power system oscillation stability studies
54
Modelling and performances of a deep-freezing process using low-grade solar heat
55
Modelling and PIP control design for open-top chambers
56
Modelling and predicting recorded property crime trends in England and Wales—a retrospective
57
Modelling and predicting the motion of ocean eddies from local current data
58
Modelling and prediction of bending stiffness for paper board manufacturing
59
Modelling and prediction of iron loss with complex flux waveforms
60
Modelling and prediction of machining errors using ARMAX and NARMAX structures
61
Modelling and prediction of NOx emission in a coal-fired power generation plant
62
Modelling and prediction of phyto- and zooplankton dynamics in Lake Kasumigaura by artificial neural networks
63
Modelling and prediction of phytoplankton growth with equation discovery
64
Modelling and prediction of phytoplankton growth with equation discovery
65
Modelling and prediction of soil sorption coefficients of non-ionic organic pesticides by molecular descriptors
66
Modelling and prediction of the stress rupture behaviour of single crystal superalloys
67
Modelling and prediction of the stress rupture behaviour of single crystal superalloys
68
Modelling and predictive control of fed-batch yeast growth on industrial pilot plant scale
69
Modelling and preliminary design of a structure-TLD system
70
Modelling and process control for the hydroforming of metallic liners used for hydrogen storage
71
Modelling and process optimization for functionally graded materials
72
Modelling and Production of Injection Moulded Polyvinylchloride--Sawdust Composite
73
Modelling and properties of a nonlinear autonomous switching system in fed-batch culture of glycerol
74
Modelling and Proportional-integral-plus Control Design for Free Air Carbon Dioxide Enrichment systems
75
Modelling and quality assessment of spots in digital images — With application to DNA microarrays
76
Modelling and quantification of dependent repeatable human errors in system analysis and risk assessment
77
Modelling and quantification of dependent repeatable human errors in system analysis and risk assessment
78
Modelling and quantification of Eco-functional Index: The concept and applications of eco-functional assessment
79
Modelling and quantitative direct digital control for a DSP-based soft-switching-mode rectifier
80
Modelling and querying geographical data warehouses
81
Modelling and Ranking the Antecedents of Brand Hate among Customers of Home Appliance
82
Modelling and real-time control of the integrated urban wastewater system
83
Modelling and reasoning for failure modes and effects analysis generation
84
MODELLING AND RELIABILITY ANALYSIS OF WATER DISTRIBUTION SYSTEMS
85
MODELLING AND RELIABILITY ANALYSIS OF WATER DISTRIBUTION SYSTEMS
86
Modelling and Rendering Graphics Scenes Composed of Multiple Volumetric Datasets
87
Modelling and representation issues in automated feature extraction from aerial and satellite images
88
Modelling and resonance of a flexible rod using a floating reference frame
89
Modelling and risk factor analysis of Salmonella Typhimurium DT104 and non-DT104 infections
90
Modelling and robust scheduling of two-stage assembly flow shop under uncertainty in assembling times
91
Modelling and scale-up of reverse osmosis separation
92
Modelling and Scheduling Lot Streaming Flexible Flow Lines
93
Modelling and segmenting subunits for sign language recognition based on hand motion analysis
94
Modelling and selection of micro-CHP systems for domestic energy supply: The dimension of network-wide primary energy consumption
95
Modelling and simulating multi-echelon food systems
96
Modelling and simulating the effect of cytokines on the immune response to tumor cells
97
Modelling and simulation
98
Modelling and simulation aspects of a solar hot water system Original Research Article
99
Modelling and simulation environment for machining of low-rigidity components
100
Modelling and simulation for mechatronic design in automotive systems
101
Modelling and simulation in snow science Original Research Article
102
Modelling and simulation of a bienzymatic reaction system co-immobilised within hydrogel-membrane liquid-core capsules
103
Modelling and simulation of a catalytic autothermal methane reformer with Rh catalyst
104
Modelling and simulation of a coal gasification process in pressurized fluidized bed
105
Modelling and simulation of a copper electrolysis cell group
106
Modelling and simulation of a deep well reactor for the wet air oxidation of sewage sludge
107
Modelling and simulation of a distributed power generation system with energy storage to meet dynamic household electricity demand
108
Modelling and simulation of a double-star induction machine vector control using copper-losses minimization and parameters estimation
109
Modelling and simulation of a gas–solids dispersion flow in a high-flux circulating fluidized bed (HFCFB) riser
110
Modelling and simulation of a group of mobile robots
111
Modelling and simulation of a hybrid solar heating system for greenhouse applications using Matlab/Simulink
112
Modelling and simulation of a lighting control system
113
Modelling and simulation of a PC-based computer numerically controlled Tdrilling machine worktable
114
Modelling and simulation of a polluted water pumping process
115
Modelling and simulation of a pumping system fed by photovoltaic generator within the Matlab/Simulink programming environment Original Research Article
116
Modelling and simulation of a schistosomiasis infection with biological control
117
Modelling and simulation of a stand-alone induction generator with rotor flux oriented control
118
Modelling and simulation of a supply chain in an uncertain environment
119
Modelling and simulation of a temperature compensation device in a fuel control unit
120
Modelling and simulation of a thermoelectric structure with pellets of non-standard geometry and materials
121
Modelling and Simulation of a Transformer With Inter-turn Fault Including Saturation Effect and Variable Fault Parameters
122
Modelling and simulation of a ventilated double window
123
Modelling and simulation of a water desalination station with solar multiple condensation evaporation cycle technique
124
Modelling and simulation of a wireless microsensor data acquisition system using PCM techniques
125
Modelling and simulation of a wood solar dryer in a Moroccan climate
126
Modelling and simulation of activation product transport in helium cooling loops
127
Modelling and simulation of adsorption process in a fluidised bed thermochemical energy reactor
128
Modelling and simulation of advanced problems and smart systems in civil engineering
129
Modelling and simulation of aerosol formation in absorption processes
130
Modelling and simulation of affinity membrane adsorption
131
Modelling and simulation of an autonomous variable speed micro hydropower station Original Research Article
132
Modelling and simulation of an industrial multiple effect evaporator: tomato concentrate Original Research Article
133
Modelling and simulation of anaerobic stratified biofilm for methane production and prediction of multiple steady states
134
Modelling and simulation of autonomous oscillators with random parameters Original Research Article
135
Modelling and Simulation of Baseband Processor for UHF RFID Reader on FPGA
136
Modelling and simulation of beam formation in electron guns
137
Modelling and simulation of beam formation in electron guns
138
Modelling and simulation of beam-to-column joints at elevated temperature: A review
139
Modelling and Simulation of Boost Converter with Maximum Power Point Tracking (MPPT) for Photovoltaic Application
140
Modelling and simulation of business systems
141
Modelling and simulation of coal gasification process in fluidised bed
142
Modelling and simulation of combined lumped and distributed systems by an object-oriented approach Original Research Article
143
Modelling and simulation of complex manufacturing systems using statechart-based actors
144
Modelling and simulation of complex systems using TPN Designer
145
Modelling and simulation of concrete leaching under outdoor exposure conditions Original Research Article
146
Modelling and simulation of continuous hydrothermal flow synthesis process for nano-materials manufacture
147
Modelling and simulation of cross flow grain dryers
148
Modelling and Simulation of Disc Brake Contact Analysis and Squeal
149
Modelling and simulation of DSL using IP and ATM: illustrative comparisons in COMNET III
150
Modelling and simulation of dynamic crushing plant behavior with MATLAB/Simulink
151
Modelling and simulation of ecological propagation processes: application to fire spread
152
Modelling and simulation of electric and magnetic fields in homogeneous non-dispersive anisotropic materials
153
Modelling and Simulation of Electric Machines, Converters and Systems
154
Modelling and Simulation of Electric Trains in the Presence of Ultra-capacitor as Energy Storage
155
Modelling and Simulation of Electric Trains in the Presence of Ultra-capacitor as Energy Storage
156
Modelling and simulation of extraction of oligomer from granular polymers
157
Modelling and simulation of final clarifiers in wastewater treatment plants Original Research Article
158
Modelling and simulation of fluid flow and heat transfer in the convective zone of a power-generation boiler
159
Modelling and Simulation of Frequency Response on Input shaft/carrier of a Planetary Gear Train under the Influence of Vibration
160
Modelling and simulation of German BIOGEST/EL-AGAMY wastewater treatment plants – Egypt using GPS-X simulator
161
Modelling and Simulation of Heat Transfer in Stored Rough Rice with Aeration
162
Modelling and Simulation of High Density Polyethylene Liner Installation in Engineered Landfill for Optimum Performance
163
Modelling and Simulation of High Pressure Fogging Air Intake Cooling Unit of Omotosho Phase II Gas Turbine Power Plant
164
Modelling and simulation of human behaviour for safety analysis and control of complex systems
165
Modelling and simulation of induction motors with inter-turn faults for diagnostics
166
Modelling and simulation of intensified absorber for post-combustion CO2 capture using different mass transfer correlations
167
Modelling and simulation of large diameter autogeneous and semi-autogeneous mills
168
Modelling and simulation of lead-acid battery charging
169
Modelling and simulation of lean premixed turbulent methane/hydrogen/air flames with an effective Lewis number approach
170
Modelling and Simulation of Low-Head Hydro Turbine for Small Signal Stability Analysis in Power System
171
Modelling and simulation of manufacturing process chains
172
Modelling and simulation of matrix converter under distorted input voltage conditions
173
Modelling and simulation of membraning dynamic membrane
174
Modelling and Simulation of Micro EDM Process
175
Modelling and simulation of micro-milling cutting forces
176
Modelling and Simulation of Multi-Input Single-Output DC Power Supply Using Single Phase Matrix Converter (SPMC)
177
Modelling and simulation of Network Enabled Capability on service-oriented architecture
178
Modelling and Simulation of Paddy Grain (Rice) Drying in a Simple Pneumatic Dryer
179
Modelling and simulation of particle breakage in impact crushers
180
Modelling and simulation of permeation behaviour on Pd/PSS composite membranes prepared by “pore-plating” method
181
Modelling and Simulation of PHY Layer of IEEE 802.22 over a Multipath Fading Channel.
182
Modelling and simulation of porous immersed boundaries
183
Modelling and simulation of Rayleigh fading, path loss, and shadowing fading for wireless mobile networks
184
Modelling and simulation of reaction mechanisms in early growth of STO thin films from ab initio calculations
185
Modelling and simulation of rougher flotation circuits
186
Modelling and simulation of semi-batch polymerisation reactor for improved reactants dosing control
187
Modelling and simulation of solar radiation data processing with Simulink
188
Modelling and simulation of solids
189
Modelling and simulation of solids
190
Modelling and simulation of solids
191
Modelling and simulation of solids
192
Modelling and simulation of solids
193
Modelling and simulation of solids
194
Modelling and simulation of stamp-charged coke making by 2-D discrete element method
195
Modelling and simulation of steam jet ejectors
196
Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing
197
Modelling and simulation of surface water waves Original Research Article
198
Modelling and simulation of the continuous power cable processing
199
Modelling and simulation of the dynamic performance of a natural-gas turbine flowmeter
200
Modelling and simulation of the electric field and particle trajectories in simultaneous two-sided dry surface treatment of paper
201
MODELLING AND SIMULATION OF THE FOAM FORMATION PROCESS
202
Modelling and simulation of the localized plastic deformation by relaxation element method
203
Modelling and simulation of the mechanical properties of YSZ/Al2O3 composites: a preliminary study
204
Modelling and simulation of the multicomponent aerosols
205
Modelling and simulation of the multi-scroll chaotic attractors using bond graph technique
206
Modelling and simulation of the near-wall velocity of a turbulent ceiling attached plane jet after its impingement with the corner
207
Modelling and simulation of the permanganic etching of banded spherulitic polyethylene: correlation with AFM observations
208
Modelling and simulation of the space mission MICROSCOPE
209
Modelling and simulation of the superelastic behaviour of shape memory alloys using the element-free Galerkin method
210
Modelling and simulation of the superelastic behaviour of shape memory alloys using the element-free Galerkin method
211
Modelling and simulation of the superelastic behaviour of shape memory alloys using the element-free Galerkin method
212
Modelling and simulation of the Torus generator
213
Modelling and simulation of the utilization of a PEM fuel cell in the rural sector of Venezuela
214
Modelling and simulation of three-phase transformers for inrush current studies
215
Modelling and simulation of time-dependent coal combustion processes in stacks
216
Modelling and simulation of unsteady heat transfer for aerospacecraft trajectory optimization Original Research Article
217
Modelling and simulation of vehicle electric power system
218
Modelling and Simulation of Vibration and Input Tracking Control of a Single-Link Flexible Manipulator
219
Modelling and simulation of wave energy hyperbaric converter (WEHC) for applications in distributed generation
220
Modelling and simulation of whirling process based on equivalent cutting volume
221
Modelling and simulation results for a domestic exhaust-air heat pump heating system
222
Modelling and simulation software to support individual-based ecological modelling
223
Modelling and simulation software to support individual-based ecological modelling
224
MODELLING AND SIMULATION STUDY OF VISIBLE EMISSION TRANSMISSIVITY OF SILICON RELATED TO SINGLE AND MULTILAYER ANTIREFLECTION COATINGS
225
Modelling and simulation techniques for forced convection heat transfer in heat sinks with rectangular fins
226
Modelling and simulation: Analysis, design and optimisation of industrial systems [MOSIM’01]
227
Modelling and simulation: H. Bossel, Modelling and Simulation, A.K. Peters, Wellesley, MA, USA (1994), ISBN 1-56881-033-4 and Verlag Vieweg, Wiesbaden, D (1994), ISBN 3-528-05419-0; pp. 484, hardback, accompanied by a 3.5 in. HD PC format diskette with si
228
Modelling and simulation: H. Bossel, Modelling and Simulation, A.K. Peters, Wellesley, MA, USA (1994), ISBN 1-56881-033-4 and Verlag Vieweg, Wiesbaden, D (1994), ISBN 3-528-05419-0; pp. 484, hardback, accompanied by a 3.5 in. HD PC format diskette with si
229
Modelling and simulations of a bonded rod
230
Modelling and simulations of multilane traffic flow by kinetic theory methods
231
Modelling and simulations of the chemo-mechanical behaviour of leached cement-based materials: Interactions between damage and leaching
232
Modelling and simulations of the chemo–mechanical behaviour of leached cement-based materials: Leaching process and induced loss of stiffness
233
Modelling and simulations of turbulent flows in urban areas with vegetation
234
Modelling and solving central cycle problems with integer programming
235
Modelling and solving English Peg Solitaire
236
Modelling and solving temporal reasoning as propositional satisfiability Original Research Article
237
Modelling and Solving the Capacitated Location-Routing Problem with Simultaneous Pickup and Delivery Demands
238
Modelling and spatial discrimination of small mammal assemblages: An example from western Sichuan (China)
239
Modelling and spatial discrimination of small mammal assemblages: An example from western Sichuan (China)
240
Modelling and state observation of Simulated Moving Bed processes based on an explicit functional wave form description Original Research Article
241
Modelling and Statistical Analysis of ocean-wave data using transformed gaussian processes
242
Modelling and supporting ICT implementation in secondary schools
243
Modelling and synthesis of discrete–continuous subsystems of machines with damping
244
Modelling and system identification of an experimental apparatus for anomaly detection in mechanical systems
245
Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects
246
Modelling and testing of a soft suspension design for a reaction/momentum wheel assembly
247
Modelling and testing of transformation-induced plasticity and stress-dependent phase transformations in steel via simple experiments
248
Modelling and tracing the super plastic deformation process of 7075aluminium alloy sheet: use of finite element technique
249
Modelling and transient planar dynamics of suspended cables with moving mass
250
Modelling and transient simulation of CO2-refrigeration systems with Modelica
251
Modelling and understanding primary health care accessibility and utilization in rural South Africa: An exploration using a geographical information system
252
Modelling and understanding the hierarchy in a mixture of experts using multiple catchment descriptors
253
Modelling and upper bound analysis of involute spur gear precision forging
254
Modelling and validation of a gas engine heat pump working with R410A for cooling applications
255
Modelling and validation of a propellant mixer for controller design
256
Modelling and validation of a squirrel cage induction generator wind turbine during connection to the local grid
257
Modelling and Validation of Heat Transfer in Stored Rough Rice without Aeration
258
Modelling and validation of shared memory coherency protocols
259
Modelling and Validation of the Air Flow generated by a Cross Flow Air Sprayer as affected by Travel Speed and Fan Speed
260
Modelling and validation of the vehicle longitudinal model
261
Modelling and verification of delay-insensitive circuits using CCS and the Concurrency Workbench
262
Modelling and verification of interworking between SIP and H.323
263
Modelling and Verification of Multiple UAV Mission Using SMV
264
Modelling and verification of program logic controllers using timed automata
265
Modelling and verification of the PWR burnable poison designs by ELCOS code system
266
MODELLING AND VIBRATION ANALYSIS OF A ROAD PROFILE MEASURING SYSTEM
267
MODELLING AND VIBRATION CONTROL OF BEAMS WITH PARTIALLY DEBONDED ACTIVE CONSTRAINED LAYER DAMPING PATCH
268
Modelling and visualizing multiple spatial uncertainties
269
Modelling and Visualizing the Fate of Shrimp Pond Effluent in a Mangrove-fringed Tidal Creek
270
Modelling and μ-synthesis control of flexible manipulators
271
Modelling andasegmenteddynamicprogramming-basedheuristicapproachforthe slab stackshufflingproblem
272
Modelling angelic and demonic nondeterminism with multirelations
273
Modelling anguilliform swimming at intermediate Reynolds number: A review and a novel extension of immersed boundary method applications Original Research Article
274
Modelling anhydrous weight loss of wood chips during torrefaction in a pilot kiln
275
Modelling animal movement as a persistent random walk in two dimensions: expected magnitude of net displacement
276
Modelling animal movement as a persistent random walk in two dimensions: expected magnitude of net displacement
277
MODELLING ANIMAL SYSTEMS PAPER Application of a kinetic model to describe phosphorus metabolism in pigs fed a diet with a microbial phytase
278
MODELLING ANIMAL SYSTEMS PAPER Application of the law of diminishing returns to estimate maintenance requirement for amino acids and their efficiency of utilization for accretion in young chicks
279
MODELLING ANIMAL SYSTEMS PAPER Economic potential of individual variation in milk yield response to concentrate intake of dairy cows
280
MODELLING ANIMAL SYSTEMS PAPER Evaluating greenhouse gas mitigation practicesin livestock systems: an illustration of a whole-farm approach
281
MODELLING ANIMAL SYSTEMS PAPER Evaluation of a mechanistic lactation model using cow, goat and sheep data
282
MODELLING ANIMAL SYSTEMS PAPER Modelling egg production and nutrient responses in broiler breeder hens
283
MODELLING ANIMAL SYSTEMS PAPER Rumen phosphorus metabolism in sheep
284
Modelling anisotropic hardening of an ultra low carbon high strength steel using crystal plasticity
285
Modelling annual pasture dynamics: Application to stomatal ozone deposition
286
Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive
287
Modelling anomia by the discrete two-stage word production architecture
288
Modelling Antarctic and Greenland volume changes during the 20th and 21st centuries forced by GCM time slice integrations
289
Modelling antipredator vigilance and flight response in group foragers when warning signals are ambiguous
290
Modelling apple orchard systems
291
Modelling approach for the simulation-based preliminary design of power transmissions
292
Modelling approach in cell/material interactions studies
293
Modelling approaches for an ultrasonic percussion drill
294
Modelling approaches for consequential life-cycle assessment (C-LCA) of bioenergy: Critical review and proposed framework for biogas production
295
Modelling approaches for filtration processes with novel submerged capillary modules in membrane bioreactors for wastewater treatment Original Research Article
296
Modelling approaches for robustness assessment of multi-storey steel-composite buildings
297
Modelling approaches for the estimation of irreducible water saturation and heterogeneities of the commercial Ashtart reservoir from the Gulf of Gabès, Tunisia
298
Modelling approaches of the in-plane shear behaviour of unreinforced and FRP strengthened masonry panels
299
Modelling approaches to acoustic cavitation in transmission pipelines
300
Modelling approaches to understanding fold development: implications for hydrocarbon reservoirs
301
Modelling aquatic exposure and effects of insecticides — Application to south-eastern Australia Original Research Article
302
Modelling architecture and growth patterns of Posidonia oceanica
303
Modelling argon dynamics in first-year sea ice
304
Modelling argument accrual with possibilistic uncertainty in a logic programming setting
305
Modelling aroma of three Italian red wines by headspace-mass spectrometry and potential functions Original Research Article
306
Modelling as a way of organising knowledge
307
Modelling ash deposition in pulverized coal-fired applications
308
Modelling aspects of forest decline in Germany: I. Theoretical aspects and cause-effect relationships
309
Modelling aspects of forest decline in Germany: II. Application and validation of an integrated soil-plant-model
310
Modelling aspects of grain drying with a neural network
311
Modelling Aspergillus flavus growth and aflatoxins production in pistachio nuts Original Research Article
312
Modelling assessment of PM10 exposure control policies in Northern Italy
313
Modelling assessment of PM10 exposure control policies in Northern Italy
314
Modelling assessment of regional groundwater contamination due to historic smelter emissions of heavy metals
315
MODELLING ASYMMETRIC EXCHANGE RATE DEPENDENCE∗
316
Modelling asynchrony in automatic speech recognition using loosely coupled hidden Markov models
317
Modelling atmospheric flows with adaptive moving meshes
318
Modelling atmospheric mercury transport and deposition across Europe and the UK
319
Modelling atmospheric nitrogen deposition to sea: A newly initiated study of the influence of aerosols and heterogeneous chemistry
320
Modelling attachment rates of multi-sized bubbles with particles in a flotation cell
321
Modelling attitudes to nature, tourism and sustainable development in national parks: A survey of visitors in China and the UK
322
Modelling atypical CYP3A4 kinetics: principles and pragmatism
323
Modelling Australian domestic and international inbound travel: a spatial–temporal approach
324
Modelling Australian interest rate swap spreads by mixture autoregressive conditional heteroscedastic processes Original Research Article
325
Modelling auto ignition of hydrogen in a jet ignition pre-chamber
326
Modelling autocatalytic behaviour of a food model system—Sucrose thermal degradation at high concentrations Original Research Article
327
Modelling autonomy: Simulating the essence of life and cognition
328
Modelling axial flow cyclone performance
329
Modelling Bacillus cereus growth
330
Modelling Bacterial Degradation of Organic Compounds with Genetic Networks
331
Modelling bacterial growth in quantitative microbiological risk assessment: is it possible?
332
Modelling bacterial water quality in streams draining pastoral land
333
Modelling balance and posture control mechanisms of the upper body using conventional and fuzzy techniques
334
Modelling ballast behaviour under dynamic loading. Part 1: A 2D polygonal discrete element method approach Original Research Article
335
Modelling base cations in Europe—sources, transport and deposition of calcium
336
Modelling basic physical parameters in the Adriatic Sea as the basis for marine benthic habitats mapping
337
Modelling basic physical parameters in the Adriatic Sea as the basis for marine benthic habitats mapping
338
Modelling batch farrowing management within a farrow to finish pig herd: influence of management on contact structure and pig delivery to the slaughterhouse
339
Modelling beam-to-girder semi-rigid composite connection with angles including the effects of concrete tension stiffness
340
Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis
341
Modelling bedload yield in braided gravel bed rivers
342
Modelling beer fermentation variability Original Research Article
343
Modelling behavioral syndromes using Bayesian networks
344
Modelling belowground processes to explain field-scale emissions of nitrous oxide
345
Modelling belowground processes to explain field-scale emissions of nitrous oxide
346
Modelling benthic denitrification processes over a whole drainage network
347
Modelling benthic oxygen consumption and benthic-pelagic coupling at a shallow station in the southern North Sea
348
Modelling bentonite–water interactions at high solid/liquid ratios: swelling and diffuse double layer effects
349
Modelling beta transus temperature of titanium alloys using artificial neural network
350
Modelling binary black-hole coalescence
351
Modelling bioaccumulation of oil constituents in aquatic species
352
Modelling bioactivity and degradation of bioactive glass based tissue engineering scaffolds
353
Modelling bioconcentration of pesticides in fish using biopartitioning micellar chromatography
354
Modelling biodegradation of hydrocarbons in aquifers: when is the use of the instantaneous reaction approximation justified?
355
Modelling biodegradation of nonylphenol ethoxylate in acclimated and non-acclimated microbial cultures
356
Modelling biodiesel droplet evaporation using continuous thermodynamics
357
Modelling biodiversity and land use: urban growth, agriculture and nature in a wetland area
358
Modelling biofilm growth in the presence of carbon dioxide and water flow in the subsurface
359
Modelling biological aerated filters for wastewater treatment
360
Modelling biological control with wild-type and genetically modified baculoviruses in the Helicoverpa armigera–cotton system
361
Modelling biological control with wild-type and genetically modified baculoviruses in the Helicoverpa armigera–cotton system
362
Modelling biological evolvability: implicit context and variation filtering in enzyme genetic programming
363
Modelling biological invasions: species traits, species interactions, and habitat heterogeneity
364
Modelling biological nutrient removal activated sludge systems—a review
365
Modelling biological phosphorus and nitrogen removal in a full scale activated sludge process
366
Modelling biological populations in space and time: Eric Renshaw, Cambridge Studies in Mathematical Biology, Cambridge Univ. Press, New York, 1993, 403 pp., $29.95 (paper back)
367
Modelling biomass and nutrient dynamics in eelgrass (Zostera marina L.): applications to the Lagoon of Venice (italy) and طresund (Denmark)
368
Modelling biomass and nutrient dynamics in eelgrass (Zostera marina L.): applications to the Lagoon of Venice (italy) and طresund (Denmark)
369
Modelling biplanes on surfaces
370
Modelling bird habitat suitability based on landscape parameters at different scales
371
Modelling bivariate count series with excess zeros
372
Modelling Black Carbon concentrations in two busy street canyons in Brussels using CANSBC
373
Modelling blackwater: Predicting water quality during flooding of lowland river forests
374
Modelling blackwater: Predicting water quality during flooding of lowland river forests
375
Modelling blast loads on buildings in complex city geometries
376
Modelling bone tissue fracture and healing: a review
377
Modelling bottom and topside electron density and TEC with profile data from topside ionograms Original Research Article
378
Modelling breakage and reagglomeration during fine dry grinding in ball milling devices
379
Modelling brittle and semi-brittle fracture processes
380
Modelling brittle and semi-brittle fracture processes
381
Modelling brittle crack formation at geometrical and material discontinuities using a finite fracture mechanics approach
382
Modelling brittle impact failure of disc particles using material point method
383
Modelling browning and brown spotting of mushrooms (Agaricus bisporus) stored in controlled environmental conditions using image analysis Original Research Article
384
Modelling bryophyte distribution based on ecological information for extent of occurrence assessment Original Research Article
385
Modelling bubble–particle interaction with dynamic surface tension
386
Modelling bubbly flow and its transitions in vertical annuli using population balance technique
387
Modelling bulk density, porosity and shrinkage of quince during drying: The effect of drying method Original Research Article
388
Modelling buoyancy regulation in fishes with swimbladders: bioenergetics and behaviour
389
Modelling buoyancy regulation in fishes with swimbladders: bioenergetics and behaviour
390
Modelling business processes with workflow systems: an evaluation of alternative approaches
391
Modelling Business Responsibility of SMEs : A Study Based on the Stakeholder Approach
392
Modelling butterfly species richness using mesoscale environmental variables: model construction and validation for mountain ranges in the Great Basin of western North America Original Research Article
393
Modelling by a planar map: Lyapunov-type numbers in the presence of spiral points
394
Modelling by an analytical function of a pixellized CdTe photoconductor response
395
Modelling by an analytical function of a pixellized CdTe photoconductor response
396
Modelling by teacher educators
397
Modelling C and N dynamics in forest soils with a modified version of the CENTURY model
398
Modelling C and N dynamics in forest soils with a modified version of the CENTURY model
399
Modelling C and N mineralisation in soil food webs during secondary succession on ex-arable land
400
Modelling C and N mineralisation in soil food webs during secondary succession on ex-arable land
401
Modelling C, N, water and heat dynamics in winter wheat under climate change in southern Sweden
402
Modelling cadmium flows in Australia on the basis of a substance flow analysis
403
Modelling cadmium retention by soils and the effects of aluminium competition
404
Modelling calcium microdomains using homogenisation
405
Modelling canopy conductance and transpiration of fruit trees in Mediterranean areas: A simplified approach
406
Modelling canopy conductance under wet and dry conditions in a subtropical cloud forest
407
Modelling cantilever-based force spectroscopy with polymers
408
Modelling capillary rise and soil salinity for shallow saline water table under irrigated and non-irrigated conditions
409
Modelling capillary rise and soil salinity for shallow saline water table under irrigated and non-irrigated conditions
410
Modelling car ownership in Great Britain
411
Modelling carbon and nitrogen dynamics in forest ecosystems of Central Russia under different climate change scenarios and forest management regimes
412
Modelling carbon and nitrogen dynamics in forest ecosystems of Central Russia under different climate change scenarios and forest management regimes
413
Modelling carbon and nutrient cycling in a simulated pond system at Ranchi
414
Modelling carbon and nutrient cycling in a simulated pond system at Ranchi
415
Modelling carbon and water cycles in a beech forest: Part I: Model description and uncertainty analysis on modelled NEE
416
Modelling carbon and water cycles in a beech forest: Part I: Model description and uncertainty analysis on modelled NEE
417
Modelling carbon and water cycles in a beech forest: Part II.: Validation of the main processes from organ to stand scale
418
Modelling carbon and water cycles in a beech forest: Part II.: Validation of the main processes from organ to stand scale
419
Modelling carbon budget of Mediterranean forests using ground and remote sensing measurements
420
Modelling carbon dioxide accumulation at Sleipner: Implications for underground carbon storage
421
Modelling carbon dynamics and response to environmental change along a boreal fen nutrient gradient
422
Modelling carbon dynamics and response to environmental change along a boreal fen nutrient gradient
423
Modelling carbon dynamics in mixed grass–red clover swards
424
Modelling carbon emissions in electric systems
425
Modelling carbon emissions of UK dwellings – The Tarbase Domestic Model
426
Modelling carbon isotopes in spruce trees reproduces air quality changes due to oil sands operations
427
Modelling carbon storage in highly fragmented and human-dominated landscapes: Linking land-cover patterns and ecosystem models
428
Modelling carbon storage in highly fragmented and human-dominated landscapes: Linking land-cover patterns and ecosystem models
429
Modelling cardiac repolarisation for the study of the T wave: effect of repolarisation sequence
430
Modelling casein aggregation and curd firming in goats milk from backscatter of infrared light
431
Modelling catalytic combustion of carbon monoxide and hydrocarbons over catalytically active wire meshes
432
Modelling Catchment Rainfall Using Sum of Correlated Gamma Variables
433
Modelling causality via action dependencies in branching time semantics
434
Modelling CCDs for X-ray detectors using three-dimensional semiconductor device modelling software
435
Modelling CCDs for X-ray detectors using three-dimensional semiconductor device modelling software
436
Modelling CDA mass spectra
437
Modelling Cell Cycle using Different Levels of Representation
438
Modelling cell lineage using a meta-Boolean tree model with a relation to gene regulatory networks
439
Modelling cell wall growth using a fibre-reinforced hyperelastic–viscoplastic constitutive law
440
Modelling cement grinding circuits
441
Modelling central-local fiscal relations in China
442
Modelling change in environmental systems
443
Modelling Change in Environmental Systems, A.J. Jakeman, M.B. Beck, M.J. McAleer (Eds.). Wiley (1993), xxi + 584, ISBN: 0-471-95780-1
444
Modelling Change in Environmental Systems: A. J. Jakeman, M. B. Beck, and M. J. McAleer (Eds.), John Wiley and Sons, Inc., New York, 1993, 600 pp.
445
Modelling changes in forest soil chemistry at 16 Swedish coniferous forest sites following deposition reduction
446
Modelling changes in Mediterranean thermohaline circulation 1987–1995
447
Modelling changes in stable isotope compositions of minerals during net transfer reactions in a contact aureole: Wollastonite growth at the northern Hunter Mountain Batholith (Death Valley National Park, USA)
448
Modelling changes in the mass balance of glaciers of the northern hemisphere for a transient 2*CO2 scenario
449
Modelling changes in transmural propagation and susceptibility to arrhythmia induced by volatile anaesthetics in ventricular tissue
450
Modelling changes to electricity demand load duration curves as a consequence of predicted climate change for Australia
451
Modelling channel incision and alpine hillslope development using laser altimetry data
452
Modelling chaos and hyperchaos with 3-D maps
453
Modelling chaotic behaviour in agricultural prices using a discrete deterministic nonlinear price model
454
Modelling charge injection in mos analogue switches using a compact model in a deep submicron technology
455
Modelling cheetah relocation success in southern Africa using an Iterative Bayesian Network Development Cycle
456
Modelling cheetah relocation success in southern Africa using an Iterative Bayesian Network Development Cycle
457
Modelling chemical and biological reactions during unsaturated flow in silty arable soils
458
Modelling chemical degradation of concrete during leaching with rain and soil water types
459
Modelling chemical depletion profiles in regolith
460
Modelling chemical kinetics of small clusters after nanosecond laser ablation
461
Modelling chemistry in aircraft plumes 1: comparison with observations and evaluation of a layered approach
462
Modelling chemistry in aircraft plumes 2: the chemical conversion of NOx to reservoir species under different conditions
463
Modelling chemotherapy resistance in palliation and failed cure
464
Modelling Childbearing Desire: Comparison of Logistic Regression and Classification Tree Approaches
465
Modelling childhood causes of paranormal belief and experience: Childhood trauma and childhood fantasy
466
Modelling chip formation of alloy 718
467
Modelling chloride and CO2 chemistry in the wairakei geothermal reservoir
468
Modelling chromosomal aberration induction by ionising radiation: The influence of interphase chromosome architecture Original Research Article
469
Modelling circumcision and condom use as HIV/AIDS preventive control strategies
470
Modelling circumplanetary ejecta clouds at low altitudes: A probabilistic approach
471
Modelling citation age data with right censoring
472
Modelling citation age data: Simple graphical methods from reliability theory
473
Modelling climate change impact on Septoria tritici blotch (STB) in France: Accounting for climate model and disease model uncertainty
474
Modelling climate change impacts on species’ distributions at the European scale: implications for conservation policy
475
Modelling climate change impacts on the distribution of breeding birds in Britain and Ireland
476
Modelling climate change in a Dutch polder system using the FutureViewR modelling suite
477
Modelling climate policy: Perspectives on future negotiations
478
Modelling climate protection expenditure
479
Modelling climatic erosivity as a factor for soil erosion in Denmark: changes and temporal trends
480
Modelling Clock Synchronization in the Chess gMAC WSN Protocol
481
Modelling cloud data for prototype manufacturing
482
Modelling cloud effects on ozone on a regional scale: A case study
483
Modelling Clustering of Wireless Sensor Networks with Synchronised Hyperedge Replacement
484
Modelling CO2 and energy exchanges in a northern semiarid grassland using the carbon- and nitrogen-coupled Canadian Land Surface Scheme (C-CLASS)
485
Modelling CO2 and energy exchanges in a northern semiarid grassland using the carbon- and nitrogen-coupled Canadian Land Surface Scheme (C-CLASS)
486
Modelling CO2 effects on wheat with varying nitrogen supplies
487
Modelling CO2 policies for the Japanese iron and steel industry
488
Modelling CO2 solubility in pure water and NaCl-type waters from 0 to 300 °C and from 1 to 300 bar: Application to the Utsira Formation at Sleipner
489
Modelling CO2-enrichment effects using an interactive vegetation SVAT scheme
490
Modelling coal combustion: the current position
491
Modelling coastal connectivity in a Western Boundary Current: Seasonal and inter-annual variability
492
Modelling coating quality in fluidised bed coating: Spray sub-model Original Research Article
493
Modelling Coevolution in Multispecies Communities
494
Modelling cognition in emotional disorder: The S-REF model
495
Modelling cohesive crack growth in concrete beams using scaled boundary finite element method based on super-element remeshing technique
496
Modelling cohesive crack growth using a two-step finite element-scaled boundary finite element coupled method
497
Modelling coke formation and deactivation in a FCCU Original Research Article
498
Modelling cold hardening and dehardening in timothy. Sensitivity analysis and Bayesian model comparison
499
Modelling collaboration using complex networks
500
Modelling Collaborative Software Development Using Axiomatic Design Principles
501
Modelling collective opinion formation by means of active Brownian particles
502
Modelling collisions of soft agglomerates at the continuum length scale
503
Modelling colloid association with plutonium: The effect of pH and redox potential
504
Modelling colloid transport in groundwater; the prediction of colloid stability and retention behaviour
505
Modelling colour and chlorophyll losses of frozen green beans (Phaseolus vulgaris, L.)
506
Modelling colour changes during the caramelisation reaction Original Research Article
507
Modelling colour degradation of orange juice by ozone treatment using response surface methodology Original Research Article
508
Modelling combustion reactions for gas flaring and its resulting emissions
509
Modelling commercial fish distributions: Prediction and assessment using different approaches
510
Modelling commercial fish distributions: Prediction and assessment using different approaches
511
Modelling comminution patterns within a pilot scale AG/SAG mill
512
Modelling community engagement in public libraries
513
Modelling community interactions and social capital dynamics: The case of regional and rural communities of Australia
514
Modelling compaction of agricultural subsoils by tracked heavy construction machinery under various moisture conditions in Switzerland
515
Modelling compaction of agricultural subsoils by tracked heavy construction machinery under various moisture conditions in Switzerland 
516
Modelling compensatory effects of defoliation on leaf area growth and biomass of sunflower (Helianthus annuus L.)
517
Modelling competition in short rotation forests
518
Modelling competitive Hopfield networks for the maximum clique problem
519
Modelling complex assemblies as a queueing network for lead time control
520
Modelling Complex Fenestration Systems using physical and virtual models
521
Modelling complex flood flow evolution in the middle Yellow River basin, China
522
Modelling complex geometry using solid finite element meshes with correct composite material orientations
523
Modelling Complex Populations Formed by Proliferating, Quiescent and Quasi-quiescent Cells: Application to Plant Root Meristems
524
Modelling complex soil properties as contaminated regionalized variables
525
Modelling complex solution equilibria: III. Error-robust calculation of equilibrium constants from pH or potentiometric titration data
526
Modelling complex systems in applied sciences; methods and tools of the mathematical kinetic theory for active particles
527
Modelling composting as a microbial ecosystem: a simulation approach
528
Modelling composting as a microbial ecosystem: a simulation approach
529
Modelling compressible mantle convection with large viscosity contrasts in a three-dimensional spherical shell using the yin-yang grid
530
Modelling compression behaviour of delaminated composite panels
531
Modelling compression tests on aluminium produced by equal channel angular extrusion Original Research Article
532
Modelling compressive cyclic stress–strain behaviour of structural foam
533
Modelling concentration fluctuations and individual exposure in complex urban environments
534
Modelling concentrations of airborne primary and secondary PM10 and PM2.5 with the BelEUROS-model in Belgium
535
Modelling concentrations of airborne primary and secondary PM10 and PM2.5 with the BelEUROS-model in Belgium
536
Modelling concentrations of volcanic ash encountered by aircraft in past eruptions
537
Modelling concentric contraction of muscle using an improved cross-bridge model
538
Modelling concepts for the phenotypic plasticity of dry matter and nitrogen partitioning in rice
539
Modelling Concurrent Mobile Transactions Execution in Broadcasting Environments
540
Modelling conditional correlations in the volatility of Asian rubber spot and futures returns Original Research Article
541
Modelling conditional variance function in industrial data: A case study
542
Modelling conduction in carbon nanotube networks with different thickness, chemical treatment and irradiation
543
Modelling confined multi-material heat and mass flows using SPH
544
Modelling confinement experiments in community ecology: differential mobility among competitors
545
Modelling confinement experiments in community ecology: differential mobility among competitors
546
Modelling conflicting objectives in the management of a mobile ecological resource: Red deer in the Scottish Highlands
547
Modelling conflicts with cluster dynamics in networks
548
Modelling conformations and IR spectra of p-tert-butylthiacalix[4]arene tetraester using DFT method
549
Modelling conjugate flow and heat transfer in a ventilated room for indoor thermal comfort assessment
550
Modelling conjugation with stochastic differential equations
551
Modelling constant weight codes using tabu search
552
Modelling constraints in part structures
553
Modelling constructed wetland treatment system performance
554
Modelling constructed wetland treatment system performance
555
Modelling consumer choice behaviour in space tourism
556
Modelling Consumer Price Index in Tanzania: Holt Winter’s Approach
557
Modelling consumersʹ preferences for Novel Protein Foods and environmental quality
558
Modelling consumption: permanent-income or rule-of-thumb behaviour?
559
Modelling contact spread of infection in host–parasitoid systems: Vertical transmission of pathogens can cause chaos
560
Modelling contaminant effects on deposit feeding nematodes near Gulf of Mexico production platforms
561
Modelling contaminant effects on deposit feeding nematodes near Gulf of Mexico production platforms
562
Modelling contaminant geochemistry in estuaries
563
Modelling Contamination of Field Drainage Water by Ammonium following Slurry Spreading
564
Modelling continuous foam fractionation with reflux
565
Modelling control of crystal growth processes
566
Modelling convection drying of blanched parsley root slices
567
Modelling convection in solidification processes using stabilized finite element techniques
568
Modelling conversational pragmatics in communication aids
569
Modelling cooling kinetics of a stack of spheres during mist chilling Original Research Article
570
Modelling coolMOS transistors in SPICE
571
Modelling Cooperation between fishermen with a Cellular automaton. A framework for fishing effort spatial dynamics
572
Modelling copper adsorption on olivine process dust using a simple linear multivariable regression model
573
Modelling copper removal in wetland ecosystems
574
Modelling copper removal in wetland ecosystems
575
Modelling coral reef ecosystems with limited observational data
576
Modelling coral reef ecosystems with limited observational data
577
Modelling coral reef habitat trajectories: Evaluation of an integrated timed automata and remote sensing approach
578
Modelling coral reef habitat trajectories: Evaluation of an integrated timed automata and remote sensing approach
579
Modelling corn starch swelling in batch systems: effect of sucrose and hydrocolloids Original Research Article
580
Modelling corporate failure: A multinomial nested logit analysis for unordered outcomes
581
Modelling corporate wireless security and privacy
582
Modelling corrosion propagation in reinforced concrete structures – A critical review
583
Modelling cost complementarities in terms of joint production
584
Modelling cost-effectiveness of Helicobacter pylori screening to prevent gastric cancer: a mandate for clinical trials
585
Modelling counter-current and dual counter-current chromatography using longitudinal mixing cell and eluting counter-current distribution models
586
Modelling counter-current chromatography using a temperature dependence plate model
587
Modelling counter-current chromatography: a chemical engineering perspective
588
Modelling country spillover effects in country risk ratings
589
Modelling coupled chemico-osmotic and advective–diffusive transport of nitrate salts in the Callovo-Oxfordian Clay
590
MODELLING COUPLED DYNAMICS: PIEZOELECTRIC ELEMENTS UNDER CHANGING TEMPERATURE CONDITIONS
591
Modelling coupled heat–water transfers during a decontamination treatment of the surface of solid food products by a jet of hot air. I. Sensitivity analysis of the model and first validations of product surface temperature under constant air temperature c
592
Modelling coupled heat–water transfers during a decontamination treatment of the surface of solid food products by a jet of hot air—II. Validations of product surface temperature and water activity under fast transient air temperature conditions Original
593
Modelling coupled peach tree–aphid population dynamics and their control by winter pruning and nitrogen fertilization
594
Modelling coupled peach tree–aphid population dynamics and their control by winter pruning and nitrogen fertilization
595
Modelling coupled water and heat transport in a soil–mulch–plant–atmosphere continuum (SMPAC) system
596
Modelling coupled water flow, solute transport and geochemical reactions affecting heavy metal migration in a podzol soil
597
Modelling covariates for the SF-6D standard gamble health state preference data using a nonparametric Bayesian method
598
Modelling cover deformation and decoupling during inversion, using the Mid-Polish Trough as a case study
599
Modelling covid-19 data using double geometric stochastic process
600
Modelling Cr(VI) reduction by pure bacterial cultures
601
Modelling crack growth by level sets in the extended finite element method
602
Modelling crack propagation in reinforced concrete using a hybrid finite element–scaled boundary finite element method
603
Modelling crack tip plastic zones and brittle-ductile transitions
604
Modelling crack tip plastic zones and brittle-ductile transitions
605
Modelling cracks in finite bodies by distributed dislocation dipoles
606
Modelling crayfish population dynamics using catch data: A size-structured model
607
Modelling crayfish population dynamics using catch data: A size-structured model
608
Modelling creativity and knowledge-based creative design : Edited by John S. Gero and Mary Lou Maher. Lawrence Erlbaum Associates, Hillsdale, NJ, USA, 1993. £46.95, 354 pp, ISBN 0-8058-1153-2
609
Modelling credit in the transmission mechanism of the United Kingdom
610
Modelling credit rating by fuzzy adaptive network
611
Modelling creep behaviour of orthotropic composites by the coincident element method
612
Modelling creep of single crystal CM186LC alloy under constant and variable loading
613
Modelling creep tests in HMPE fibres used in ultra-deep-sea mooring ropes
614
Modelling crimp in woven fabrics subjected to ballistic impact
615
Modelling critical loads for the Solling spruce site
616
Modelling critical loads for the Solling spruce site
617
Modelling crop evapotranspiration and potential impacts on future water availability in the Indo-Gangetic Basin
618
Modelling crop production potentials for yield gap analysis under semiarid conditions in Guquka, South Africa
619
Modelling crop productivity and variability for policy and impacts of climate change in eastern Canada
620
Modelling crop yield, soil water content and soil temperature for a soybean–maize rotation under conventional and conservation tillage systems in Northeast China
621
Modelling crop-weed interactions : M. J. Kropff and H. H. van Laar. CAB International, in association with the International Rice Research Institute, 1993. 274 pp. Price: £35 or US$66.50. ISBN 0 85198 7451 (CABI), ISBN 971 220038 8 (IRRI)
622
Modelling cross-ply laminated elastic shells by a higher-order theory and multiquadrics
623
Modelling crowd–bridge dynamic interaction with a discretely defined crowd
624
Modelling Crowdfunding Ensemble Learning Prediction
625
Modelling crystal plasticity by 3D dislocation dynamics and the finite element method: The Discrete-Continuous Model revisited
626
Modelling curling as a Markov process
627
Modelling current transport through DNA (deoxyribonucleic acid) molecules using equivalent circuits
628
Modelling curved S–N curves
629
Modelling Customer Attraction Prediction in Customer Relation Management using Decision Tree: A Data Mining Approach
630
Modelling cyanobacteria (blue-green algae) in the River Murray using artificial neural networks Original Research Article
631
Modelling cyanobacteria in shallow coastal seas
632
Modelling cyanobacteria in shallow coastal seas
633
Modelling cycle to cycle variations in an SI engine with detailed chemical kinetics
634
Modelling cyclic shear deformation of fibre/epoxy layers in fibre metal laminates
635
Modelling daily net canopy photosynthesis and its adaptation to irradiance and atmospheric CO2 concentration
636
Modelling daily topographic solar radiation without site-specific hourly radiation data
637
Modelling daily topographic solar radiation without site-specific hourly radiation data
638
Modelling daily Value-at-Risk using realized volatility and ARCH type models
639
Modelling damage accumulation in filled polymers
640
Modelling damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading
641
Modelling damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading
642
Modelling damage evolution in composite laminates subjected to low velocity impact
643
Modelling damage of multiple delaminations and transverse matrix cracking in laminated composites due to low velocity lateral impact
644
Modelling dam-break flows over mobile beds using a 2D coupled approach
645
Modelling damping ratio and shear modulus of sand–mica mixtures using genetic programming
646
Modelling damping ratio and shear modulus of sand–mica mixtures using neural networks
647
Modelling daylight on inclined surfaces for applications to daylight conscious architecture
648
Modelling daytime thermal infrared directional anisotropy over Toulouse city centre
649
Modelling debonded stem–cement interface for hip implants: effect of residual stresses
650
Modelling decision making in fund raising management by a fuzzy knowledge system
651
Modelling decision-making processes for annual crop management
652
Modelling decomposition of standard plant material along an altitudinal gradient: A re-analysis of data of Coûteaux et al. (2002)
653
Modelling decomposition of standard plant material along an altitudinal gradient: A re-analysis of data of Coûteaux et al. (2002)
654
Modelling deforestation using GIS and artificial neural networks
655
Modelling deformation behaviour of polyelectrolyte gels under chemo-electro-mechanical coupling effects
656
Modelling deformation in nailed, thin-webbed timber box beams
657
Modelling dehydration and quality degradation of maize during fluidized-bed drying Original Research Article
658
Modelling delamination onset and growth in pin loaded composite laminates
659
Modelling delaminations in postbuckling stiffened composite shear panels
660
Modelling demand for crude oil products in Spain
661
Modelling demand response aggregator behavior in wind power offering strategies
662
Modelling demand systems with demographic effects based on the modifying function approach
663
Modelling demography and extinction risk in the endangered Balearic shearwater Original Research Article
664
Modelling dendritic solidification with melt convection using the extended finite element method
665
Modelling denitrification at the catchment scale Original Research Article
666
MODELLING DENITRIFICATION IN A MOVING BED OF POROUS CARRIERS FROM A LOW-LOADED WASTEWATER TREATMENT PLANT
667
MODELLING DENITRIFICATION IN A MOVING BED OF POROUS CARRIERS FROM A LOW-LOADED WASTEWATER TREATMENT PLANT
668
Modelling Density-Dependent Resistance in Insect–Pathogen Interactions
669
Modelling Departure Time, Destination and Travel Mode Choices by Using Generalized Nested Logit Model: Discretionary Trips
670
Modelling dependable systems using hybrid Bayesian networks
671
Modelling dependable systems using hybrid Bayesian networks
672
Modelling dependence
673
Modelling dependence structure with Archimedean copulas and applications to the iTraxx CDS index
674
Modelling dependencies in paired comparison data: A log-linear approach
675
Modelling dependencies in paired comparison data: A log-linear approach
676
Modelling Dependency of the Steady-State Grain Size on the Stacking Fault Energy in Severely Plastic Deformed Materials
677
Modelling deposit growth on tilted rotating cylindrical substrate in centrifugal spray deposition
678
Modelling deposition on diesel engine exhaust valves
679
Modelling Deroceras reticulatum (Gastropoda) population dynamics based on daily temperature and rainfall
680
Modelling detailed information flows in building design with the parameter-based design structure matrix
681
Modelling determinants of child mortality and poverty in the Comoros
682
Modelling detonation waves in heterogeneous energetic materials
683
Modelling deuterium fractionation in interstellar clouds
684
Modelling deuterium release during thermal desorption of D+-irradiated tungsten
685
Modelling Developed Land in Phuket Province of Thailand: 2000-2009
686
Modelling development of epidemics with dynamic small-world networks
687
Modelling dewatering behaviour through an understanding of solids formation processes. Part I—Solids formation considerations
688
Modelling dewatering behaviour through an understanding of solids formation processes: Part II—solids separation considerations
689
Modelling diagnosis of heavy metal (copper) transport in an estuary
690
Modelling dialogues in agent societies
691
Modelling dialogues in agent societies
692
Modelling diatom growth in turbulent waters
693
Modelling different types of automobile insurance fraud behaviour in the Spanish market
694
Modelling differential catchment response to environmental change
695
Modelling diffractive X-ray scattering using the EGS Monte Carlo code
696
Modelling diffractive X-ray scattering using the EGS Monte Carlo code
697
Modelling diffuse emission and retention of nutrients in the Vantaanjoki watershed (Finland) using the SWAT model
698
Modelling diffuse emission and retention of nutrients in the Vantaanjoki watershed (Finland) using the SWAT model
699
Modelling diffusion and replacement
700
Modelling diffusion controlled electrocrystallisation processes
701
Modelling diffusion in a heterogeneous rock matrix with a time-domain Lagrangian method and an inversion procedure
702
Modelling diffusion to a disk electrode by fully explicit simulation
703
Modelling direct-fired annealing furnaces for transient operations
704
Modelling directional spatial processes in ecological data
705
Modelling directional spatial processes in ecological data
706
Modelling discontinuities and Kelvin–Helmholtz instabilities in SPH
707
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation Original Research Article
708
Modelling discrete fragmentation of brittle particles
709
Modelling disease spread through random and regular contacts in clustered populations
710
Modelling dislocation transmission across tilt grain boundaries in 2D
711
Modelling dislocation–obstacle interactions in metals exposed to an irradiation environment
712
Modelling dispersal behaviour on a fractal landscape
713
Modelling dispersal dynamics of the early life stages of a marine flatfish (Solea solea L.)
714
Modelling dispersal of populations and genetic information by finite element methods
715
Modelling dispersal of sea scallop (Placopecten magellanicus) larvae on Georges Bank: The influence of depth-distribution, planktonic duration and spawning seasonality
716
Modelling dispersal of sterile male codling moths, Cydia pomonella, across orchard boundaries
717
Modelling dispersal of sterile male codling moths, Cydia pomonella, across orchard boundaries
718
Modelling dispersal with diffusion and habitat selection: Analytical results for highly fragmented landscapes
719
Modelling dispersal with diffusion and habitat selection: Analytical results for highly fragmented landscapes
720
Modelling dispersion behavior of low-dimensional carbon nanofillers in liquids
721
Modelling Dispersion Characteristics of Circular Optical Waveguide with Helical Winding - Comparison for Different Pitch Angles
722
Modelling dispersion of traffic pollution in a deep street canyon: Application of CFD and operational models
723
Modelling dissolution of an organic mixture in the subsurface
724
Modelling dissolved oxygen and benthic algae dynamics in a coastal ecosystem by exploiting real-time monitoring data
725
Modelling dissolved oxygen dynamics in coastal lagoons
726
Modelling dissolved oxygen dynamics in coastal lagoons
727
Modelling distributed generations in three-phase distribution load flow
728
Modelling distribution of evaporating CO2 in parallel minichannels
729
Modelling distribution of habitats required for different uses by the same species: Implications for conservation at the regional scale
730
Modelling distribution of marine benthos from hydroacoustics and underwater video
731
Modelling distribution storage water quality: An analytical approach
732
Modelling diurnal and seasonal patterns of maize pollen emission in relation to meteorological factors
733
Modelling diurnal patterns of air temperature, radiation wind speed and relative humidity by equations from daily characteristics
734
Modelling diurnal variation of dissolved oxygen in waste stabilization ponds
735
Modelling diurnal variation of dissolved oxygen in waste stabilization ponds
736
Modelling diversity, change and uncertainty in peasant agriculture in northern Malawi
737
Modelling DOC export from watersheds in Scotland using neural networks
738
Modelling Dominance Hierarchy formation as a Multi-player game
739
MODELLING DRAINAGE PERFORMANCE IN SLUMS OF DEVELOPING COUNTRIES: HOW GOOD IS GOOD ENOUGH?
740
MODELLING DRAINAGE PERFORMANCE IN SLUMS OF DEVELOPING COUNTRIES: HOW GOOD IS GOOD ENOUGH?
741
Modelling driver choices towards accident risk reduction
742
Modelling drivers’ car parking behaviour using data from a travel choice simulator
743
Modelling droplet formation in cross-flow membrane emulsification Original Research Article
744
Modelling droplet motion and interfacial tension in filters collecting liquid aerosols Original Research Article
745
Modelling droplet size distributions in polydispersed wet-steam flows
746
Modelling ductile fracture behaviour from deformation parameters in HSLA steels
747
Modelling dwarf mistletoe at three scales: life history, ballistics and contagion
748
Modelling dwarf mistletoe at three scales: life history, ballistics and contagion
749
Modelling dwelling fire development and occupancy escape using Bayesian network
750
Modelling dwelling fire development and occupancy escape using Bayesian network
751
Modelling dynamic behaviour and noise generation in gear pumps: Procedure and validation
752
Modelling dynamic failure of concrete with meshfree methods
753
Modelling dynamic niche and community model by type-2 fuzzy set
754
Modelling dynamic niche and community model by type-2 fuzzy set
755
Modelling dynamic portfolio risk using risk drivers of elliptical processes
756
Modelling dynamic softening processes during hot working
757
Modelling dynamic spatial processes: simulation of urban future scenarios through cellular automata
758
Modelling dynamic urban expansion processes incorporating a potential model with cellular automata
759
Modelling dynamical systems using manifest and latent variables Original Research Article
760
MODELLING DYNAMICS OF A CONTINUOUS STRUCTURE WITH A PIEZOELECTRIC SENSORACTUATOR FOR PASSIVE STRUCTURAL CONTROL
761
Modelling Dynamics of Autonomous Logistic Processes: Discrete-event versus Continuous Approaches
762
Modelling dynamics of managed tropical rainforests—An aggregated approach
763
Modelling dynamics of managed tropical rainforests—An aggregated approach
764
Modelling dynamics of piezoelectric solids in the two-dimensional case
765
Modelling dynamics of soil organic matter under different historical land-use management techniques in European Russia
766
Modelling dynamics of soil organic matter under different historical land-use management techniques in European Russia
767
Modelling early age hydration kinetics of alite
768
Modelling earthquake activity features using cellular automata
769
Modelling earth-to-air heat exchanger behaviour with the convolutive response factors method
770
Modelling ECG signals with hidden Markov models
771
Modelling eclipsing binaries with pulsating components: Phase dependence of observed pulsation amplitudes
772
Modelling ecological and economic systems with STELLA: Part II
773
Modelling ecological and economic systems with STELLA: Part II
774
Modelling ecological expertise for forest planning calculations-rationale, examples, and pitfalls
775
Modelling ecological interaction despite object-oriented modularity
776
Modelling ecological interaction despite object-oriented modularity
777
Modelling ecologically specialized biological visual systems
778
Modelling economic growth in the UK: An econometric case for disaggregated sectoral analysis
779
Modelling economic impacts of deficit irrigated maize in Brazil with consideration of different rainfall regimes
780
Modelling economics of DFT and DFY: a profit perspective
781
Modelling economies in transition: an introduction
782
Modelling economies subject to structural change: The case of Germany
783
Modelling eco-physiological response of table olive trees (Olea europaea L.) to soil water deficit conditions
784
Modelling ecosystem functions and properties at different time and spatial scales in shallow coastal lagoons: An application of the LOICZ biogeochemical model
785
Modelling ecosystem structure and trophic interactions in a typical cyanobacterial bloom-dominated shallow Lake Dianchi, China
786
Modelling ecosystem structure and trophic interactions in a typical cyanobacterial bloom-dominated shallow Lake Dianchi, China
787
Modelling ecosystems in ventilated conical bottomed farm grain silos
788
Modelling ecosystems in ventilated conical bottomed farm grain silos
789
Modelling effect of physical and chemical parameters on heat inactivation kinetics of hepatitis A virus in a fruit model system
790
Modelling effective moisture difusivity of rough rice (Lido cultivar) at low drying temperatures Original Research Article
791
Modelling effects of chemical exposure on birds wintering in agricultural landscapes: The western burrowing owl (Athene cunicularia hypugaea) as a case study
792
Modelling effects of chemical exposure on birds wintering in agricultural landscapes: The western burrowing owl (Athene cunicularia hypugaea) as a case study
793
Modelling effects of curtain method on algal blooming in reservoirs
794
Modelling effects of curtain method on algal blooming in reservoirs
795
Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers
796
Modelling effects of high product and substrate inhibition on oscillatory behavior in continuous bioreactors
797
Modelling effects of soil acidification on tree growth and nutrient status
798
Modelling effects of soil acidification on tree growth and nutrient status
799
Modelling effects of stair width on rates of stair climbing in a train station
800
Modelling effects of tyre inflation pressure on the stress distribution near the soil–tyre interface
801
Modelling efficiency in insect olfactory information processing
802
Modelling elasticity of a hydrating cement paste
803
Modelling electrical conductivity of groundwater using an adaptive neuro-fuzzy inference system
804
Modelling electricity demand in Ghana revisited: The role of policy regime changes
805
Modelling electricity demand with representative load curves
806
Modelling electrochemical control of percolation conductivity in short-chain templated conducting polymers
807
Modelling electrochemical control of percolation conductivity in short-chain templated conducting polymers
808
Modelling electrochemical current and potential oscillations at the Si electrode
809
Modelling electrolyte conductivity in a water electrolyzer cell
810
Modelling elemental carbon at regional, urban and traffic locations in The Netherlands
811
Modelling ellipsoidal uncertainty by multidimensional fuzzy sets
812
Modelling embedded risk in peasant agriculture: methodological insights from northern Malawi
813
Modelling encapsulation of gold and silver nanoparticles inside lipid nanotubes
814
Modelling encounter rates and distribution of mobile predators and prey
815
Modelling endangered languages: The effects of bilingualism and social structure
816
Modelling end-of-roll dynamics in positioning servos
817
Modelling energy and CO2 fluxes with an interactive vegetation land surface model-Evaluation at high and middle latitudes
818
Modelling energy and non-energy substitution: A brief survey of elasticities
819
MODELLING ENERGY CONTENT OF MUNICIPAL SOLID WASTE USING ARTIFICIAL NEURAL NETWORK
820
Modelling energy demand of developing countries: Are the specific features adequately captured?
821
Modelling energy fluxes in remote wetland ecosystems with the help of remote sensing
822
Modelling energy fluxes in remote wetland ecosystems with the help of remote sensing
823
Modelling energy savings in the Danish building sector combined with internalisation of health related externalities in a heat and power system optimisation model
824
Modelling energy systems for developing countries
825
Modelling enterprise networks: A master equation approach
826
Modelling enthalpy and entropy of pure and mixed refrigerants with an innovative corresponding states method
827
Modelling entropy and exergy changes during a fluid self-organization process
828
Modelling entropy and exergy changes during a fluid self-organization process
829
Modelling environmental attitudes toward tourism
830
Modelling environmental impacts of deposition of excreted nitrogen by grazing dairy cows
831
Modelling environmental responses of plant associations: A review of some critical concepts in vegetation study
832
Modelling environmental risk
833
Modelling environmental stochasticity in adult survival for a long-lived species
834
Modelling environmental stochasticity in adult survival for a long-lived species
835
Modelling environmental variables for geohazards and georesources assessment to support sustainable land-use decisions in Zaragoza (Spain)
836
Modelling environments in call-by-value programming languages
837
Modelling enzymatic hydrolysis of cellulose part I: Population balance modelling of hydrolysis by endoglucanase
838
Modelling enzymatic oxidation of d-glucose with pyranose 2-oxidase in the presence of catalase
839
Modelling ephemeral gully erosion in small cultivated catchments
840
Modelling epistasis in genetic disease using Petri nets, evolutionary computation and frequent itemset mining
841
Modelling equable climates of the Late Cretaceous: Can new boundary conditions resolve data–model discrepancies?
842
Modelling EROEI and net energy in the exploitation of non renewable resources
843
Modelling EROEI and net energy in the exploitation of non renewable resources
844
Modelling erosion and sediment delivery from unsealed roads in southeast Australia Original Research Article
845
Modelling error estimation and adaptive modelling of perforated materials
846
Modelling error propagation in vector-based overlay analysis
847
Modelling eruption cycles and decay of mud volcanoes
848
Modelling establishment probabilities of an exotic plant, Rhododendron ponticum, invading a heterogeneous, woodland landscape using logistic regression with spatial autocorrelation
849
Modelling establishment probabilities of an exotic plant, Rhododendron ponticum, invading a heterogeneous, woodland landscape using logistic regression with spatial autocorrelation
850
Modelling estimates of honey bee (Apis spp.) colony density from drones
851
Modelling estimates of honey bee (Apis spp.) colony density from drones
852
Modelling estuarine and coastal flows using an unstructured triangular finite volume algorithm
853
Modelling estuarine eutrophication in the context of hypoxia, nitrogen loadings, stratification and nutrient ratios
854
Modelling estuarine variations in tidal marsh sedimentation: response to changing sea level and suspended sediment concentrations
855
Modelling ethical rules of lying with Answer Set Programming
856
Modelling ethoprophos and bentazone fate in a sandy humic soil with primary pesticide fate model PRZM-2
857
Modelling Eu(III) speciation in a Eu(III)/PAHA/α-Al2O3 ternary system
858
Modelling eutrophication events in a coastal ecosystem. Sensitivity analysis
859
Modelling eutrophication in mesotidal and macrotidal estuaries. The role of intertidal seaweeds
860
Modelling evaporation and drift losses in irrigation with medium size impact sprinklers under semi-arid conditions
861
Modelling evaporation fronts with reactive Riemann solvers
862
Modelling evapotranspiration in a Central Asian desert ecosystem
863
Modelling evapotranspiration in a Central Asian desert ecosystem
864
Modelling evapotranspiration in a Scots pine stand under Mediterranean mountain climate using the GLUE methodology
865
Modelling evapotranspiration of corn (Zea mays) under different plant densities
866
Modelling evapotranspiration of six irrigated crops under Mediterranean climate conditions
867
Modelling evidence of stress concentration mitigation at the micro-scale in polymer composites by the addition of carbon nanotubes
868
Modelling evolution in manufacturing: A biological analogy
869
Modelling evolving long-run relationships: the linkages between stock markets in Asia
870
Modelling Evolving Populations
871
Modelling ex-ante the economic and environmental impacts of Genetically Modified Herbicide Tolerant maize cultivation in Europe
872
Modelling excess profit
873
Modelling exchange rates using regime switching models (Pemodelan Kadar Tukaran Wang Asing Menggunakan Model Perubahan Rejim)
874
Modelling expert knowledge with knowledge-based systems to design decision aids : The example of a knowledge-based model on grazing management
875
Modelling experts’ judgments on soil compaction to derive decision rules for soil protection—A case study from Switzerland
876
Modelling exposure of oceanic higher trophic-level consumers to polychlorinated biphenyls: Pollution ‘hotspots’ in relation to mass mortality events of marine mammals
877
Modelling exposure opportunities: estimating relative risk for motor neurone disease in Finland
878
Modelling Extended Extragalactic Radio Sources
879
Modelling extrasolar planetary atmospheres
880
Modelling extreme concentrations from a source in a turbulent flow over a rough wall
881
Modelling extreme rainfalls using a modified random pulse Bartlett–Lewis stochastic rainfall model (with uncertainty)
882
Modelling extreme wind speeds at a German weather station as basic input for a subsequent risk analysis for high-speed trains
883
Modelling extremes of time-dependent data by Markov-switching structures
884
Modelling extrusion cooking
885
Modelling facial colour and identity with Gaussian mixtures
886
Modelling facial expressions: A framework for simulating nonlinear soft tissue deformations using embedded 3D muscles
887
Modelling facies belt distribution in fan deltas coupling sequence stratigraphy and geostatistics: The Eocene Sant Llorenç del Munt example (Ebro foreland basin, NE Spain)
888
Modelling Facility Location Problems in Emerging Markets: The Case of The Public Healthcare Sector in Morocco
889
Modelling faecal coliform dynamics in streams and rivers
890
Modelling faecal coliform mortality in water hyacinths ponds
891
Modelling failure of natural rock columns
892
Modelling Farm Diversification in Regions Using Expert and Decision Support Systems
893
Modelling farm diversity: new approaches to typology building in France
894
Modelling farmer behaviour: a personal construct theory interpretation of hierarchical decision models
895
Modelling farmer uptake of perennial energy crops in the UK
896
Modelling farmers’ action: decision rules capture methodology and formalisation structure: a case of biomass flow operations in dairy farms of a tropical island
897
Modelling farming system dynamics in High Nature Value Farmland under policy change
898
Modelling farmland abandonment: A study combining GIS and data mining techniques
899
Modelling farm-level economic potential for conversion to organic farming
900
Modelling fat microstructure using finite element analysis Original Research Article
901
Modelling fatigue crack growth in shot-peened components of Al 2024-T351
902
Modelling fatigue crack propagation of a cracked metallic member reinforced by composite patches
903
Modelling fatigue damage accumulation in two-dimensional Voronoi honeycombs
904
Modelling fatigue damage accumulation in two-dimensional Voronoi honeycombs
905
Modelling fatigue damage accumulation in two-dimensional Voronoi honeycombs
906
Modelling feeding behaviour, rate of feed passage and daily feeding cycles, as possible causes of fatigued pigs
907
Modelling feeding processes in bivalves: A mechanistic approach
908
Modelling feeding processes in bivalves: A mechanistic approach
909
Modelling female reproductive function in farmed animals
910
Modelling ferroelastic domain switching at a stationary crack tip in a single crystal with account of transformation stresses due to domain reorientation
911
Modelling field-scale cadmium transport below the root zone of a sewage sludge amended soil in an arid region in Central Iran
912
Modelling financial markets with agents competing on different time scales and with different amount of information
913
Modelling financial time series using multifractal random walks
914
Modelling financial volatility in the presence of abrupt changes
915
Modelling fingerprint ridge orientation using Legendre polynomials
916
Modelling finite geometries on surfaces Original Research Article
917
Modelling finite-rate chemistry effects in nonpremixed turbulent combustion: Test on the bluff-body stabilized flame
918
Modelling fire-return interval T: stochasticity and censoring in the two-parameter Weibull model
919
Modelling fire-return interval T: stochasticity and censoring in the two-parameter Weibull model
920
Modelling firms propensity to continue service exporting: a cross-country analysis
921
Modelling fish mortality due to urban storm run-off: Interacting effects of hypoxia and un-ionized ammonia
922
Modelling five years of weather-driven variation of GPP in a boreal forest
923
Modelling flank instabilities on stratovolcanoes: Parameter sensitivity and stability analyses of Teide, Tenerife
924
Modelling flanking structures using deformable high axial ratio ellipses: Insights into finite geometries
925
Modelling floodplain inundation for environmental flows: Gwydir wetlands, Australia
926
Modelling floodplain inundation for environmental flows: Gwydir wetlands, Australia
927
Modelling floor heating systems using a validated two-dimensional ground-coupled numerical model
928
Modelling flotation froths
929
Modelling flotation with a flexible approach – Integrating different models to the compartment model
930
Modelling flow and accreted ice in subglacial Lake Concordia, Antarctica
931
Modelling flow and filtration in liquid composite moulding of nanoparticle loaded thermosets
932
Modelling flow and heat transfer around a seated human body by computational fluid dynamics
933
Modelling flow and heat transfer in fractured rocks: Conceptual model of a 3-D deterministic fracture network Original Research Article
934
Modelling flow and heat transfer in fractured rocks: dimensional effect of matrix heat diffusion Original Research Article
935
Modelling flow and heat transfer in spacer-filled membrane distillation channels using open source CFD code Original Research Article
936
Modelling Flow and Oscillations in Collapsible Tubes
937
Modelling flow and work hardening behaviour of cold worked Zr–2.5Nb pressure tube material in the temperature range of 30–600 ̊C
938
Modelling flow behaviour of dairy foams through a nozzle Original Research Article
939
Modelling flow enhancement in nanochannels: Viscosity and slippage
940
Modelling flow in the porous bottom of the Barents Sea shelf
941
Modelling flow rate gradient elution in reversed-phase liquid chromatography Original Research Article
942
Modelling flow to leachate wells in landfills
943
Modelling flowback as a transient two-phase depletion process
944
Modelling fluctuations of financial time series: from cascade process to stochastic volatility model
945
Modelling fluid convection stability in continental faulted rifts with applications to the Taupo Volcanic Zone, New Zealand
946
Modelling fluxes of water and sediment between Venice Lagoon and the sea
947
Modelling fly ash generation for pulverised coal combustion
948
MODELLING FOOD PROCESSING OPERATIONS WITH COMPUTATIONAL FLUID DYNAMICS: A REVIEW
949
Modelling for a dynamic inventory-production control system
950
Modelling for control analysis and design in complex industrial separation and liquefaction processes
951
Modelling for economic cost and environmental analysis of rainwater harvesting systems
952
Modelling for fault detection and isolation versus modelling for control Original Research Article
953
Modelling for Field Biologists and Other Interesting People by Hanna Kokko
954
Modelling for forest management synergies and trade-offs: Northern hardwood tree regeneration, timber and deer
955
Modelling for forest management synergies and trade-offs: Northern hardwood tree regeneration, timber and deer
956
Modelling for hydrogen diffusion in metals with traps revisited Original Research Article
957
Modelling for Improved Irrigation Water Management in a Temperate Region of Northern Spain
958
Modelling for isothermal cavitation with a four-equation model
959
Modelling for maize irrigation scheduling using long term experimental data from Plovdiv region, Bulgaria
960
Modelling for management: Simulation in support of systems thinking : ed. George P. Richardson, Dartmouth Publishing (1997), in two volumes, 493pp. (Vol. 1), 447pp (Vol. 2). £195.00 (hbk), £55.00 (pbk). (Both volumes)
961
Modelling for moisture variation during osmo-concentration in apple and pineapple Original Research Article
962
Modelling for multi-scale ecosystems in the context of global climate change
963
Modelling for multi-scale ecosystems in the context of global climate change
964
Modelling for part-load operation of solid oxide fuel cell–gas turbine hybrid power plant
965
Modelling for prediction of global deforestation based on the growth of human population
966
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
967
Modelling for semiconductor spintronics
968
Modelling for small diameter hydrocyclones
969
Modelling for species and habitats: new opportunities for problem solving
970
Modelling for the control of a complex radar system
971
Modelling for the effective control of the electric flow heaters – Simulation validation
972
Modelling for the Reduction and Spread Transmission of the Dynamics and Control of Zika virus Disease: Using Ordinary Differential Equations
973
MODELLING FOR TRANSCRYSTALLINE AND INTERCRYSTALLINE FRACTURE BY VOID NUCLEATION AND GROWTH
974
Modelling for vacuum drying characteristics of coconut presscake Original Research Article
975
Modelling force deployments from army installations using the Transportation System Capability (TRANSCAP) model: A standardized approach
976
Modelling forest carbon balances considering tree mortality and removal
977
Modelling forest dynamics with vital attributes and fuzzy systems theory
978
Modelling forest dynamics with vital attributes and fuzzy systems theory
979
Modelling forest ecosystem net primary production: the hybrid simulation approach used in forecast
980
Modelling forest ecosystem net primary production: the hybrid simulation approach used in forecast
981
Modelling forest fire spread using hexagonal cellular automata
982
Modelling forest fires. Part I: a complete set of equations derived by extended irreversible thermodynamics
983
Modelling forest fires. Part II: reduction to two-dimensional models and simulation of propagation
984
Modelling forest growing stock from inventory data: A data mining approach
985
Modelling forest management within a global vegetation model—Part 1: Model structure and general behaviour
986
Modelling forest management within a global vegetation model—Part 1: Model structure and general behaviour
987
Modelling forest management within a global vegetation model—Part 2: Model validation from a tree to a continental scale
988
Modelling forest management within a global vegetation model—Part 2: Model validation from a tree to a continental scale
989
Modelling forest succession in two southeastern Canadian mixedwood ecosystem types using the ZELIG model
990
Modelling forest succession in two southeastern Canadian mixedwood ecosystem types using the ZELIG model
991
Modelling forest transpiration and CO2 fluxes—response to soil moisture stress
992
Modelling forest–savanna mosaic dynamics in man-influenced environments: effects of fire, climate and soil heterogeneity
993
Modelling forest–savanna mosaic dynamics in man-influenced environments: effects of fire, climate and soil heterogeneity
994
Modelling form factors in HQET
995
Modelling formation of complex topography by the seagrass Posidonia oceanica
996
Modelling formation of spray dried powders
997
Modelling fracture propagation and failure in a rock pillar under mechanical and thermal loadings
998
Modelling fragment size distribution using two-parameter Weibull equation
999
Modelling frame losses in a two-hop ATM network
1000
Modelling framework for assessment of dietary exposure to added flavouring substances within the FACET (Flavours, Additives, and Food Contact Material Exposure Task) project
بازگشت