ليست عنوان مقالات لاتين Solid supported active esters as linkers: modification of reactivity using iron carbonyl complexes Solid-state 13C NMR study of banana liquid crystals – 2: Alkyl tail-group packing environments in the hexagonal columnar phase

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Solid supported active esters as linkers: modification of reactivity using iron carbonyl complexes

2

Solid supported chiral auxiliaries in asymmetric synthesis. Part 2: Catalysis of 1,3-dipolar cycloadditions by Mg(II) cation

3

Solid supported high-throughput organic synthesis of peptide β-turn mimetics via tandem Petasis reaction/diketopiperazine formation

4

Solid supported lipid bilayers: From biophysical studies to sensor design

5

Solid supported micellar catalysis: some syntheses and characterisations

6

Solid supported palladium(0) nano/microparticle: a ligand-free efficient recyclable heterogeneous catalyst for mono- and β,β-double-Heck reaction

7

Solid supported Pd(0): an efficient recyclable heterogeneous catalyst for chemoselective reduction of nitroarenes

8

Solid supported rhodium(0) nanoparticles: an efficient catalyst for chemo- and regio-selective transfer hydrogenation of nitroarenes to anilines under microwave irradiation

9

Solid supported Ru(0) nanoparticles: an efficient ligand-free heterogeneous catalyst for aerobic oxidation of benzylic and allylic alcohol to carbonyl

10

Solid supported synthesis of structurally diverse dihydropyrido[2,3-d]pyrimidines using microwave irradiation

11

Solid Supports in Enzyme-Linked Immunosorbent Assay and Other SolidPhase Immunoassays

12

Solid surface dependent layering of self-arranged structures with fibril-like assemblies of alpha-synuclein

13

Solid surface mapping by inverse gas chromatography

14

Solid surface room temperature phosphorescence of tetracycline antibiotics

15

Solid surface room temperature phosphorimetry analysis of yohimbine hydrochloride in pharmaceutical formulations

16

Solid targetry at the TESLA Accelerator Installation

17

Solid targetry at the TESLA Accelerator Installation

18

Solid tethered imino-bis-propanediol and quaternary amine functional copolymer brushes for rapid extraction of trace boron Original Research Article

19

Solid tidal friction above a liquid water reservoir as the origin of the south pole hotspot on Enceladus

20

Solid timber beams strengthened with steel plates – Experimental studies

21

Solid transport in a pyrolysis pilot-scale rotary kiln: preliminary results—stationary and dynamic results

22

Solid Trichlorotitanium (IV) Trifluoromethanesulfonate TicL3 (OTf) Catalyzed Highly Efficient Protection of Aldeyhydes as their Acylals at Room Temperature under Solvent-Free Conditions

23

Solid triphenylmethanol: A molecular material that undergoes multiple internal reorientational processes on different timescales

24

Solid T-spline construction from boundary representations for genus-zero geometry

25

Solid tumors after heart transplantation: Lethality of lung cancer

26

Solid tumors associated with multiple endocrine neoplasias

27

Solid tumors in cardiac allograft recipients

28

Solid Tumors of the Lateral Ventricle: Endoscopic Assisted Microsurgical Excision through Transcortical and Transcallosal Approaches

29

Solid tumour growth analysis of necrotic core formation

30

Solid type dye-sensitized solar cell using polysaccharide containing redox electrolyte solution

31

Solid variant of aneurysmal bone cyst with a novel (X;9) translocation

32

Solid waste as renewable source of energy: current and future possibility in Algeria

33

Solid waste characteristics in an operating landfill in a developing country

34

Solid waste characterization and recycling potential for a university campus

35

Solid Waste Characterization in Ethiope East Local Government Area Of Delta State, Abraka, Nigeria

36

Solid Waste Co-Conversion by Hydrothermal Treatment using Natural Zeolite

37

Solid waste collection by the private sector: Households’ perspective—Findings from a study in Dar es Salaam city, Tanzania

38

Solid waste deposits as a significant source of contaminants of emerging concern to the aquatic and terrestrial environments — A developing country case study from Owerri, Nigeria Original Research Article

39

solid waste estimation per capita in equity girls hostel blocks, igbinedion university okada, nigeria

40

Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents

41

Solid Waste Landfills as a Source of Green Energy: Case Study of Al Akeeder Landfill

42

Solid waste management and the urban community: A case study in Kuching city

43

Solid Waste Management Baling Scheme Economics Methodology

44

Solid waste management beliefs and practices in rural households towards sustainable development and pro-environmental citizenship

45

Solid waste management in Abuja, Nigeria

46

Solid Waste Management in Commercial City of Bangladesh

47

Solid waste management in Indian Himalayan tourists’ treks: a case study in and around the Valley of Flowers and Hemkund Sahib

48

Solid waste management in Macao: Practices and challenges

49

Solid waste management in New Zealand

50

Solid waste management practices and review of recovery and recycling operations in Turkey

51

Solid Waste Management System Analysis by Multiobjective Mixed Integer Programming Model

52

Solid waste management system for small island developing states

53

Solid waste plasma disposal plant

54

Solid waste plasma gasification: Equilibrium model development and exergy analysis

55

Solid Waste Production and Its Management in Dental Clinics in Gorgan, Northern Iran

56

Solid waste treatment within the framework of life-cycle assessment

57

Solid waste: terminological and long-term environmental risk assessment problems exemplified in a power plant fly ash study

58

Solid Wastes Composition and Generation in Selected Hotels at Aba and Umuahia, Abia State, Nigeria

59

Solid Wastes Generation in Covenant University, Ota, Nigeria: Characterisation and Implication for Sustainable Waste Management

60

Solid wastes generation in India and their recycling potential in building materials

61

Solid wastes integrated management in Rio de Janeiro: input–output analysis

62

Solid, cystic and vanishing tumors of the pancreas

63

Solid, shape recovered “Bulk” nitinol: Part II—Mechanical properties

64

Solid, shape recovered “bulk” Nitinol: Part I—Tension–compression asymmetry

65

Solid/liquid- and vapor-phase interactions between cellulose- and lignin-derived pyrolysis products

66

Solid/liquid- and vapor-phase interactions between cellulose- and lignin-derived pyrolysis products

67

Solid/liquid erosion behavior of gas tungsten arc welded TiNi overlay

68

Solid/liquid interfacial tension as a tool to study stability of lysozyme on adsorption to solid surfaces

69

Solid/liquid Phase Microextraction of Anticancer Drug Cisplatin by Using a Hollow Fiber Reinforced with Multiwalled Carbon Nanotube- Ion Exchange Polyurethane Foam, and Determination by Graphite Furnace Atomic Absorption Spectrometry

70

Solid/liquid separation behavior of alum and polyaluminium chloride coagulation flocs

71

Solid/solid separation by selective agglomeration with agglomerant recovery by thermal desorption

72

Solid/vapour sorption heat transformer: Design and performance

73

Solid¯liquid mass transfer limitation of ferrous iron in the chemical oxidation of FeS2 at high redox potential

74

Solidang, a computer code for the computation of the effective solid angle and correction factors for gamma spectroscopy-based waste assay

75

Solid–aqueous solution interface phenomena at the molecular level

76

Solidarity and Akcja Wyborcza ‘Solidarnoscʹ. An attempt at reviving the legend

77

Solidarity and conflicts in coresidence of three-generational immigrant families from the former Soviet Union

78

Solidarity Day at Unión Fenosa in Spain

79

Solidarity in Indonesian conversation: The discourse marker ya

80

Solidarity in the Time of COVID-19 Pandemic

81

Solidarity through collaborative research

82

Solidarity, justice and health care priorities : Edited by Zbigniew Szawarski and Donald Evans. Health Service Studies 8, Linkimageping University, Linkimageping, Sweden, 1993. 128 pp., U.S.$25.00

83

Solid-assisted melt disintegration (SAMD), a novel technique for metal powder production

84

Solid-bound, proton-driven, fluorescent ‘off–on–off’ switches based on PET (photoinduced electron transfer)

85

Solid-calcified colloid cyst of the third ventricle

86

Solid-CdS and hollow-ZnS porous submicrospheres: Direct preparation by C–S decomposition of thiol via solvothermal processing

87

Solid-contact Hg(II)-selective electrode based on a carbon-epoxy composite containing a new dithiophosphate-based ionophore

88

Solid-contact ion-selective electrode with stable internal electrode

89

Solid-contact ion-selective electrodes for aromatic cations based on π-coordinating soft carriers

90

Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range

91

Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range Original Research Article

92

Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level

93

Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level

94

Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore

95

Solid-electrolyte NASICON thick film CO2 sensor prepared on small-volume ceramic tube substrate

96

Solid-emissive boron–fluorine derivatives with large Stokes shift

97

Solid–extracellular fluid interaction and damage in the mechanical response of rat brain tissue under confined compression

98

Solid–fluid diffuse interface model in cases of extreme deformations

99

Solid–fluid equilibria in natural gas systems

100

Solid–fluid equilibrium for organic molecules: understanding the link between molecular structure and phase diagrams

101

Solid–fluid phase behaviour of linear polyethylene solutions in propane, ethane and ethylene at high pressures

102

Solid–fluid phase equilibria of compositionally complex mixtures: contrast of equilibrium and process treatments

103

Solid–fluid phase transitions under extreme pressures including negative ones

104

Solid–fluid phase transitions under extreme pressures including negative ones

105

Solid-fuel household cook stoves: Characterization of performance and emissions

106

Solid–gas and electrochemical hydrogenation properties of pseudo-binary (Ti,Zr)Ni intermetallic compounds

107

Solid–gas carbonylation of aryloxide rhodium(I) complexes: stepwise reaction forming Vaska-type complexes

108

Solid–gas reactions of complex oxides inside an environmental high-resolution transmission electron microscope

109

Solid-hydroxide-proton conductors in new electrochemical cells “hydrogenated metal–protonics”

110

Solidification analysis of a single particle with encapsulated phase change materials

111

Solidification and abrasion wear of white cast irons alloyed with 20% carbide forming elements

112

Solidification and casting/mould interfacial heat transfer characteristics of aluminum matrix composites

113

Solidification and compositional convection of a ternary alloy

114

Solidification and computational analysis of o-nitroaniline–α-naphthol eutectic system

115

Solidification and control of a liquid metal column

116

Solidification and convection of a ternary solution cooled from the side

117

Solidification and grain refinement in Ti45Al2Mn2Nb1B

118

Solidification and grain refinement in Ti45Al2Mn2Nb1B subjected to fast cooling

119

Solidification and high-temperature phase equilibria in the Fe–Al-rich part of the Fe–Al–Nb system

120

Solidification and melting behaviors and characteristics of molten salt in cold filling pipe

121

Solidification and melting of gallium and mercury in porous glasses as studied by NMR and acoustic techniques

122

Solidification and microstructural characterisation of iron–chromium based hardfaced coatings deposited by SMAW and electric arc spraying

123

Solidification and modeling of cast iron—A short history of the defining moments

124

Solidification and recycling of incinerator bottom ash through the addition of colloidal silica (SiO2) solution

125

Solidification and Stabilization of Asbestos Brake Lining Dust Using Polymeric Resins

126

Solidification and stabilization of Pb, Zn, Cd and Cu in tailing wastes using cement and fly ash

127

Solidification and Thermal Performance Analysis of the Low Carbon Steel During the Continuous Casting Process

128

Solidification behavior of a Ni-based single crystal CMSX-4 superalloy solidified by downward directional solidification process

129

Solidification behavior of Al–20.6%Cu alloy under AC magnetic field

130

Solidification behavior of cast TiB2 particulate reinforced Mg composites

131

Solidification behavior of PLLA/nHA nanocomposites

132

Solidification behavior of Sn–9Zn–xAg lead-free solder alloys

133

Solidification behavior of Ti5Si3 whiskers in TiAl alloys

134

Solidification behavior of Ti5Si3 whiskers in TiAl alloys

135

Solidification behavior of undercooled Cu70Ni30 alloy melt

136

Solidification behavior of undercooled Cu70Ni30 alloy melt

137

Solidification behavior of γ′-Ni3Al-containing alloys in the Ni–Al–O system Original Research Article

138

Solidification behavior, glass forming ability and thermal characteristics of soft magnetic Fe–Co–B–Si–Nb–Cu bulk amorphous alloys

139

Solidification behavior, microstructure and tensile properties of ZK60-Er magnesium alloys

140

Solidification behaviour and microstructural correlations in magnetocaloric Gd–Si–Ge–Nb alloys

141

Solidification behaviour and phase formation during pre-placed laser cladding of Ti45Nb on mild steel

142

Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process

143

Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process Original Research Article

144

Solidification behaviour of Sn droplets embedded in an icosahedral Al-Cu-Fe matrix

145

Solidification behaviour of Sn droplets embedded in an icosahedral Al-Cu-Fe matrix

146

Solidification behaviour of TiAl-based alloys studied by directional solidification technique

147

Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap

148

Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap

149

Solidification behaviour under intensive forced convection

150

Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys

151

Solidification characteristics of polymer solution during polyvinylidene fluoride membrane preparation by nonsolvent-induced phase separation

152

Solidification characteristics of rising immiscible oil droplets in coolant

153

Solidification characteristics of Tb0.27Dy0.73Fex (x = 1.8, 1.95) alloys during the directional solidification

154

Solidification characterization of a new rapidly solidified Ni–Cr–Co based superalloy

155

Solidification contact angles of molten droplets deposited on solid surfaces

156

Solidification cooling rate and as-cast textures of low-carbon steel strips

157

Solidification cracking of superalloy single- and bi-crystals Original Research Article

158

Solidification effects on sill formation: An experimental approach

159

Solidification from undercooled melts

160

Solidification from undercooled melts

161

Solidification in remelting processes

162

Solidification inside a sphere—an experimental study

163

Solidification interface morphology pattern in the undercooled Co–24.0 at.% Sn eutectic melt Original Research Article

164

Solidification mechanism of allophane by hydrothermal reaction

165

Solidification Mechanism of the Sediment Formed by Particle Settling — Analysis of the Final State of the Sediment

166

Solidification mechanism of the sediment formed by particle settling – Analysis of the formation of the solidified layer

167

Solidification microstructure affecting ductility in semi-solid-cast products

168

Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu–Fe alloys Original Research Article

169

Solidification microstructure formation in the Al-rich Al–La–Ni system

170

Solidification microstructure formation in the Al-rich Al–La–Ni system

171

Solidification microstructures and mechanical properties of high-vanadium Fe–C–V and Fe–C–V–Si alloys

172

Solidification microstructures and solid-state parallels: Recent developments, future directions Original Research Article

173

Solidification microstructures in the rapidly solidified powder of high alloyed V–Cr tool steel

174

Solidification microstructures: recent developments, future directions Original Research Article

175

Solidification Modeling and Dendrite Structure Analysis in a Horizontal Continuously Cast Brass Billet

176

Solidification modeling in continuous casting by finite point method

177

Solidification modelling with a control volume method on domains subjected to viscoplastic deformation

178

Solidification modes and microstructure of Fe–Cr alloys solidified at different undercoolings

179

Solidification modes and microstructure of Fe–Cr alloys solidified at different undercoolings

180

Solidification observations and sliding wear behavior of vacuum arc melting processed Ni–Al–TiC composites

181

Solidification observations of vacuum arc melting processed Fe–Al–TiC composites: TiC precipitation mechanisms

182

Solidification of a 2-D semitransparent medium using the lattice Boltzmann method and the finite volume method

183

Solidification of a binary alloy: Finite-element, single-domain simulation and new benchmark solutions

184

Solidification of a binary mixture in a shear flow

185

Solidification of a finite slab with convective cooling and shrinkage

186

Solidification of a PEG 1500-epoxy nanocomposite around a horizontal pipe

187

SOLIDIFICATION OF A PURE METAL WITH FINITE THERMAL CAPACITANCE ON A SINUSOIDAL MOLD SURFACE

188

Solidification of a supercooled liquid in stagnation-point flow

189

Solidification of a ternary alloy liquid layer on a substrate subject to self-consistent melting

190

Solidification of a ternary melt from a cooled boundary, or nonlinear dynamics of mushy layers

191

Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics

192

Solidification of Al–50 at.%Si alloy in a drop tube

193

Solidification of Al–50 at.%Si alloy in a drop tube

194

Solidification of Al–50 at.%Si alloy in a drop tube

195

Solidification of aqueous ammonium chloride in a rectangular cell under constant wall temperature - an experimental study

196

Solidification of AZ31 magnesium alloy plate in a horizontal continuous casting process

197

Solidification of borate radioactive resins using sulfoaluminate cement blending with zeolite

198

Solidification of coal fly ash using hydrothermal processing method

199

Solidification of electroplating sludge using alkali-activated pulverized fuel ash as cementitious binder

200

Solidification of high-Cr white cast iron–WC particle reinforced composites

201

Solidification of highly undercooled Si and Si–Ge melts

202

Solidification of high-refractory ruthenium-containing superalloys Original Research Article

203

Solidification of hydatid cyst fluid with an injectable chitosan/carboxymethylcellulose/β-glycerophosphate hydrogel for effective control of spillage during aspiration of hydatid cysts

204

Solidification of hydatid cyst fluid with an injectable chitosan/carboxymethylcellulose/β-glycerophosphate hydrogel for effective control of spillage during aspiration of hydatid cysts

205

Solidification of Hydrogen Clusters Including a Foreign Molecule

206

Solidification of liquid electrolyte with imidazole polymers for quasi-solid-state dye-sensitized solar cells

207

Solidification of metal foams Original Research Article

208

Solidification of metallic tin in dispersed phase

209

Solidification of Nano-Enhanced Phase Change Material (NEPCM) in an Enclosure

210

Solidification of nanostructured lipid carriers (NLCs) onto pellets by fluid-bed coating: Preparation, in vitro characterization and bioavailability in dogs

211

Solidification of PCM around a curved tube

212

Solidification of pcm inside a spherical capsule

213

Solidification of phase change material on vertical cylindrical surface in holdup air bubbles

214

Solidification of Precirol® by the expansion of a supercritical fluid saturated melt: From the thermodynamic balance towards the crystallization aspect

215

Solidification of Sr-containing stripping solutions in titanate ceramics

216

Solidification of superalloy in a SiO2–ZrO2–B2O3 coating mould

217

Solidification of Tank Bottom Sludge

218

Solidification of undercooled eutectic alloys containing a third element Original Research Article

219

Solidification of undercooled peritectic Fe-Ge alloy

220

Solidification paths and eutectic intermetallic phases in Mg-Al-Ca ternary alloys

221

Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys Original Research Article

222

Solidification paths for an icosahedral quasicrystalline phase in cast Al62Cu25.5Fe12.5 and Al55Cu25.5Fe12.5Be7 alloys

223

Solidification paths of multicomponent monotectic aluminum alloys Original Research Article

224

Solidification phases and liquidus surface of the Al-Ni-Ru system above 50 at.% aluminium

225

Solidification phases and their evolution during homogenization of a DC cast Al–8.35Zn–2.5Mg–2.25Cu alloy

226

Solidification phenomena in Ge films upon nano- and pico-second laser pulse melting

227

Solidification processing of alloys in the pseudo-binary PbTe–Sb2Te3 system Original Research Article

228

Solidification processing of high temperature intermetallic eutectic-based alloys

229

Solidification processing of high temperature intermetallic eutectic-based alloys

230

Solidification Properties of CaO-SiO2-TiO2 Based Mold Fluxes Original Research Article

231

Solidification sequence of the icosahedral quasicrystal forming Al–Cu–Fe alloys

232

Solidification sequence of the icosahedral quasicrystal forming Al–Cu–Fe alloys

233

Solidification shrinkage of Ni–Cr alloys

234

Solidification Simulation of Single Crystal Investment Castings

235

Solidification structure and crystallographic texture of strip casting 3 wt.% Si non-oriented silicon steel

236

Solidification structure formation in undercooled Fe–Ni alloy Original Research Article

237

Solidification Structure Formation of Undercooled Single Phase Alloys

238

Solidification structure in pure zirconia liquid molten phase

239

Solidification structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 powders fabricated by high pressure gas atomization

240

Solidification structure of CaO–SiO2–MgO–Al2O3 (–CaF2) systems and computational phase equilibria: Crystallization of MgAl2O4 spinel

241

Solidification structure of CaO–SiO2–MgO–Al2O3 (–CaF2) systems and computational phase equilibria: Crystallization of MgAl2O4 spinel

242

Solidification structure of undercooled Ni54.6Pd45.4 alloy

243

Solidification Structure Refining of 430 Ferrite Stainless Steel With TiN Nucleation Original Research Article

244

Solidification structures and phase selection of iron-bearing eutectic particles in a DC-cast AA5182 alloy Original Research Article

245

Solidification temperature of silicon surface layer melted by pulsed laser irradiation

246

Solidification using smoothed particle hydrodynamics

247

Solidification velocity of undercooled Ni–Cu alloys Original Research Article

248

Solidification with a quasiequilibrium two-phase zone Original Research Article

249

Solidification with water as a treatment method for air pollution control residues

250

Solidification, solution treatment and age hardening of a Mg-1.6 wt.% Ca-3.2 wt.% Zn alloy

251

Solidification, solution treatment and age hardening of a Mg–1.6 wt.% Ca–3.2 wt.% Zn alloy Original Research Article

252

Solidification/stabilisation of arsenic bearing fly ash from the metallurgical industry. Immobilisation mechanism of arsenic

253

Solidification/stabilisation of arsenic-containing waste: Leach tests and behaviour of arsenic in the leachate

254

Solidification/stabilization of Cr(VI) with cement: Leachability and XRD analyses

255

Solidification/Stabilization of Fe(II)-Treated Cr(VI)-Contaminated Soil

256

Solidification/Stabilization of Hazardous Wastes Containing Metals and Organic Contaminants

257

Solidification/Stabilization of Heavy Metals from Air Heater Washing Wastewater Treatment in Thermal Power Plants

258

Solidification/stabilization of Ni(II) by various cement pastes

259

Solidification/stabilization of toxic metal wastes using coke and coal combustion by-products

260

Solidification/stabilization Treatment of Spent Catalyst (V2O5) from a Sulfuric Acid Plant using Ordinary Portland Cement (OPC) and an Additive

261

Solidification–microprestress–microplane (SMM) theory for concrete at early age: Theory, validation and application

262

Solidificationoflow-level-radioactiveresinsinASC-zeoliteblendsOriginalResearchArticle

263

Solidified floating organic drop microextraction and spectrophotometric determination of vanadium in water samples

264

Solidified floating organic drop microextraction combined with ETV-ICP-MS for the determination of trace heavy metals in environmental water samples

265

Solidified floating organic drop microextraction for speciation of selenium and its distribution in selenium-rich tea leaves and tea infusion by electrothermal vapourisation inductively coupled plasma mass spectrometry

266

Solidified ionic liquid as crystalline sensing element of the bromide selective electrode

267

Solidified liquid layer model makes quartz crystal microbalance a convenient molecular ruler

268

Solidified Reverse Micellar Solution (SRMS)-Based Indomethacin Sustained-Release Tablets: Formulation and In vitro Evaluation

269

Solidifying liquid electrolytes with fluorine polymer and silica nanoparticles for quasi-solid dye-sensitized solar cells

270

Solidity is an imperfect state Original Research Article

271

Solid-like components in carbohydrate gels probed by NMR spectroscopy

272

Solid–liquid and liquid–liquid equilibria for 1,3,5-trioxane, or 1,4,7,10,13,16-hexaoxacyclooctadecane + selected n-alkane mixtures: Analysis in terms of DISQUAC

273

Solid–liquid distribution of selected concrete admixtures in hardened cement pastes

274

Solid–liquid equilibria and binodals of liquid–liquid equilibria for the quaternary systems aqueous solution+binary fatty acids

275

Solid–liquid equilibria and purity determination for binary n-alkane + naphthalene systems

276

Solid–liquid equilibria and the physical properties of binary systems of diphenyl carbonate, dimethyl carbonate, methyl phenyl carbonate, anisole, methanol and phenol

277

Solid–liquid equilibria based on an equation of state for chain fluids

278

Solid–liquid equilibria for binary and ternary systems with the Cubic-Plus-Association (CPA) equation of state

279

Solid–liquid equilibria for binary mixtures of N-phenylacetamide with 4-aminoacetophenone, 3-hydroxyacetophenone and 4-hydroxyacetophenone

280

Solid–liquid equilibria for systems containing 1-butyl-3-methylimidazolium chloride

281

Solid-liquid equilibria for systems containing long-chain 1-alkanols I. Experimental data for 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-icosanolbenzene or toluene mixtures. Characterization in terms of DISQUAC

282

Solid-liquid equilibria for systems containing long-chain 1-alkanols III. Experimental data for 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-icosanol + 1-butanol, 1-hexanol, 1-octanol or 1-decanol mixtures. Characterization in terms of DISQUAC

283

Solid-liquid equilibria for systems containing long-chain 1-alkanols. II. Experimental data for 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-eicosanol + CCl4 or + cyclohexane mixtures. Characterization in terms of DISQUAC

284

Solid-liquid equilibria in binary mixtures of organic compounds

285

Solid–liquid equilibria in l-leucine + l-valine + water

286

Solid–liquid equilibria in l-leucine + l-valine + water

287

Solid–liquid equilibria in the acetic acid–propanoic acid and propanoic acid–trifluoroacetic acid systems

288

Solid–liquid equilibria in the quasi-binary thallium(I) selenide–tin(IV) selenide system

289

Solid–liquid equilibria in the quasi-binary thallium(I) selenide–tin(IV) selenide system

290

Solid–liquid equilibria in the quasi-binary thallium(I) telluride–indium(III) telluride system

291

Solid–liquid equilibria in the quasi-binary thallium(I) telluride–indium(III) telluride system

292

Solid–liquid equilibria in the quaternary system K+, Fe2+, Fe3+/Cl−–H2O at 288.15 K

293

Solid–liquid equilibria in the quaternary system NaCl–FeCl2–FeCl3–H2O

294

Solid–liquid equilibria in the quinary system LiCl–KCl–RbCl–MgCl2–H2O at T = 323 K

295

Solid–liquid equilibria in the ternary system NaBO2–NaOH–H2O thermal behavior of double salts

296

Solid–liquid equilibria measurements of the carbon dioxide + 2,3,3,3-tetrafluoroprop-1-ene and carbon dioxide + trans-1,3,3,3-tetrafluoropropene mixtures

297

Solid–liquid equilibria of acenaphthene with o-, m-, or p-dichlorobenzene

298

Solid–liquid equilibria of closely boiling compounds of 4-methoxyphenol and catechol with p-cresol

299

Solid–liquid equilibria of long chain n-alkanes (C18–C28) in N,N-dimethylacetamide

300

Solid–liquid equilibria of mixtures containing tert-butanol, m-chlorophenol, and p-chlorophenol and development of adductive crystallization processes

301

Solid–liquid equilibria of systems containing pyrene and long chain normal-alkanes

302

Solid–liquid equilibria of the ternary system m-nitrobenzoic acid + p-nitrobenzoic acid + acetone

303

Solid–liquid equilibria of three binary systems of anthracene with 2-phenylimidazole, 4,5-diphenylimidazole and 2,4,5-triphenylimidazole

304

Solid–liquid equilibria of three binary systems: {1-Ethyl-3-methylimidazolium hexafluorophosphate + 2-phenylimidazole, or 4,5-diphenylimidazole or 2,4,5-triphenylimidazole}

305

Solid–liquid equilibria predictions for the dissolution of brown coal in ionic liquids using a continuum solvation model

306

Solid–liquid equilibria under high pressure of pure fatty acid methyl esters

307

Solid–liquid equilibrium (SLE) of ternary system 3-nitrophthalic acid + 4-nitrophthalic acid + 1,4-dioxane at (283.15, 293.15, 303.15, 313.15 and 323.15) K

308

Solid–liquid equilibrium and mixture properties for the binary systems of Alamine 336 with decane, dodecane, and 1-dodecanol

309

Solid–liquid equilibrium and thermochemical properties of organic eutectic in a monotectic system

310

Solid–liquid equilibrium and thermochemical studies of organic analogue of metal–nonmetal system: Succinonitrile–pentachloronitrobenzene

311

Solid–liquid equilibrium and thermodynamic of 2,5-thiophenedicarboxylic acid in different organic solvents

312

Solid–liquid equilibrium curve of calcium in 6 mol/L ammonium nitrate solution

313

Solid–liquid equilibrium data for the binary system methacrylic acid + methanol in the high methacrylic acid concentration range

314

Solid–liquid equilibrium diagrams of common ion binary salt hydrate mixtures involving nitrates and chlorides of magnesium, cobalt, nickel, manganese, and iron(III)

315

Solid–liquid equilibrium for non-hydrostatic stress Original Research Article

316

Solid–liquid equilibrium in ternary mixtures of ethyl laurate, ethyl palmitate and ethyl myristate

317

Solid–liquid equilibrium in ternary mixtures of ethyl laurate, ethyl palmitate and ethyl stearate

318

Solid–liquid equilibrium in ternary mixtures of ethyl oleate, ethyl laurate and ethyl palmitate

319

Solid–liquid equilibrium in the acetic acid–cyclohexane and acetic acid–trichloroacetic acid systems

320

Solid–liquid equilibrium in the aqueous system containing the chlorides of lithium, rubidium and magnesium at 323 K

321

Solid–liquid equilibrium of 1-hydroxyethane-1,1-diphosphonic acid in different solvents

322

Solid–liquid equilibrium of binary and ternary mixtures containing ethyl oleate, ethyl myristate and ethyl stearate

323

Solid–liquid equilibrium of dicyandiamide in different solvents

324

Solid–liquid equilibrium of K2SO4 in solvent mixtures at different temperatures

325

Solid–liquid equilibrium of quaternary system Cd2+, K+, Na+//SO42−-H2O at 298 K

326

Solid–liquid equilibrium of some polycyclic aromatic hydrocarbons in wash oil

327

Solid–liquid equilibrium of sulbactam in pure solvents and binary solvent mixtures

328

Solid–liquid equilibrium of ternary system sodium 1-naphthalenesulfonate + sodium 2-naphthalenesulfonate + water at (283.15, 303.15 and 323.15) K

329

Solid-liquid equilibrium of the GaInGaSb system and artificial neural network prediction

330

Solid-liquid equilibrium of the GaInGaSb system and artificial neural network prediction

331

Solid–liquid equilibrium of α-lactose in ethanol/water

332

Solid–liquid equilibrium prediction for binary mixtures of Ar, O2, N2, Kr, Xe, and CH4 using the LJ-SLV-EoS

333

Solid–liquid equilibrium, excess molar volume, and deviations in the molar refractivity for the binary and ternary mixtures of Alamine 304-1 with 1-octanol, 2-octanol, and 1-decanol

334

Solid–liquid equilibrium, thermal, crystallization and microstructural studies of organic monotectic alloy

335

Solid–liquid expression from denaturated plant tissue: Filtration–consolidation behaviour Original Research Article

336

Solid–liquid expression of cellular materials enhanced by pulsed electric field

337

Solid–liquid extraction and cation-exchange solid-phase extraction using a mixed-mode polymeric sorbent of Datura and related alkaloids

338

Solid–liquid extraction from plants — experimental kinetics and modelling

339

Solid–liquid extraction of alkali metals and organic compounds by leaching of food industry residues

340

Solid–liquid extraction of caffeine from tea waste using battery type extractor: Process optimization Original Research Article

341

Solid–liquid extraction of copper from slurried samples using high intensity probe sonication for electrothermal atomic absorption spectrometry

342

Solid-liquid extraction of Gd(III) and separation possibilities of rare earths from phosphoric acid solutions using Tulsion CH-93 and Tulsion CH-90 resins

343

Solid–liquid extraction of ω-amino acids using ditopic receptors

344

Solid–liquid hydrodynamics in a slim hole drilling annulus

345

Solid–liquid interactions: The key to microstructural evolution in ceramics

346

Solid–liquid interface energy of silicon Original Research Article

347

Solid–liquid interface morphology and crystal growth of NiMnGa magnetic shape memory alloys

348

Solid–liquid interface morphology and crystal growth of NiMnGa magnetic shape memory alloys Original Research Article

349

Solid–liquid interfacial energy for solid succinonitrile in equilibrium with succinonitrile dichlorobenzene eutectic liquid

350

Solid–liquid interfacial energy of camphene

351

Solid–liquid interfacial energy of camphene

352

Solid–liquid interfacial energy of solid aminomethylpropanediol solution in equilibrium with aminomethylpropanediol–neopentylglycol–D camphor liquid

353

Solid–liquid interfacial energy of the eutectoid β phase in the Al–Zn eutectic system

354

Solid–liquid interfacial energy of the eutectoid β phase in the Al–Zn eutectic system

355

Solid-liquid magnetic separation using bulk superconducting magnets

356

Solid-Liquid Mass Transfer and Hydrodynamics in the Hydrogenation of 4-Nitrobenzoic Acid

357

Solid–liquid mass transfer in a gas–liquid–solid three-phase reversed flow jet loop reactor

358

Solid–liquid mass transfers in an Airlift Reactor incorporating alginate beads for the application as a bioartificial liver

359

Solid–liquid metastable equilibria in the quaternary system (NaCl–KCl–CaCl2–H2O) at 288.15 K

360

Solid–liquid metastable equilibria in the quaternary system Li2SO4 + MgSO4 + Na2SO4 + H2O at T = 263.15 K

361

Solid–liquid phase diagram of the two Ionic Liquids EMIMCl and BMIMCl

362

Solid–liquid phase diagram of the water octamer

363

Solid–liquid phase diagrams of binary salt hydrate mixtures involving magnesium nitrate and acetate, magnesium and aluminum nitrates, ammonium alum and sulfate, and ammonium alum and aluminum sulfate

364

Solid–liquid phase equilibria for mixtures containing diatomic Lennard–Jones molecules

365

Solid–liquid phase equilibria in binary (1-octanol + n-alkane) mixtures under high-pressure: Part 2. (1-Octanol + n-octane, n-dodecane) systems

366

Solid-liquid phase equilibria in binary (benzene, cyclohexane + n-tetradecane, n-hexadecane) systems at temperatures 230–323 K and pressures up to 120 MPa

367

Solid–liquid phase equilibria in the aqueous ternary system Li2SO4 + LiBO2 + H2O at T = 288.15 and 298.15 K

368

Solid–liquid phase equilibria in the system K2SO4–MgSO4–H2O at 318 K

369

Solid–liquid phase equilibria in the system K2SO4–MnSO4–H2O at 298 K and 313 K

370

Solid-liquid phase equilibria in the system water + methanol + MgSO4·7H2O + MnSO4·4H2O

371

Solid–liquid phase equilibria in the systems K2SO4–MSO4–H2O (M = Co, Ni, Cu) from ambient to enhanced temperatures

372

Solid–liquid phase equilibria of binary indole mixtures with some aromatic compounds using a solid–liquid–vapor equation-of-state

373

Solid–liquid phase equilibrium and phase diagram for ternary 3-nitrophthalic acid–4-nitrophthalic acid–water system at 283.15 K and 333.15 K

374

Solid–liquid phase equilibrium and phase diagram for ternary o-nitrobenzoic acid–p-nitrobenzoic acid–acetone system at 283.15 K and 313.15 K

375

Solid–liquid phase equilibrium for the ternary system urea phosphate + ammonium dihydrogen phosphate + water at 25 and 55 °C

376

Solid–liquid phase equilibrium in the systems of LiBr–H2O and LiCl–H2O

377

Solid–liquid phase equilibrium of 9-fluorenone and several polynuclear aromatic hydrocarbons

378

Solid–liquid phase equilibrium of glyphosate in selected solvents

379

Solid–liquid phase equilibrium study of binary mixtures of n-octadecane with capric, and lauric acid as phase change materials (PCMs)

380

Solid–liquid phase transition of nanofluids

381

Solid-liquid phase transitions in Lennard-Jones systems

382

SOLID-LIQUID SEPARATION AFTER LIQUID-LIQUID EXTRACTION USING alpha-BENZILMONOXIME-MOLTEN BENZOPHENONE FOR PRECONCENTRATION AND SELECTIVE SPECTROPHOTOMETRIC DETERMINATION OF PALLADIUM

383

Solid–liquid separation by sonochemistry: A new approach for the separation of mineral suspensions

384

Solid–liquid separation by sonochemistry: A new approach for the separation of mineral suspensions

385

Solid–liquid separation equipment selection and modelling

386

Solid-liquid separation in suspension atomization

387

Solid-liquid Separation of Activated Sludge by Flotation Using Microporous Ceramic Diffuser

388

Solid–liquid separation of faecal sludge using drying beds in Ghana: Implications for nutrient recycling in urban agriculture

389

Solid–liquid separation of livestock slurry: efficiency and cost

390

Solid-Liquid Separation Systems IV

391

Solid–liquid transitions in homogenous ovalene, hexabenzocoronene and circumcoronene clusters: A molecular dynamics study

392

Solid–liquid transitions in the rheology of a structured yeast extract paste, Marmite™ Original Research Article

393

Solid–liquid transport in a modified co-rotating twin-screw extruder—dynamic simulator and experimental validations

394

Solid–liquid–gas equilibrium of the naphthalene–biphenyl–CO2 system: Measurement and modeling

395

Solid–liquid–solid (SLS) growth of coaxial nanocables: silicon carbide sheathed with silicon oxide

396

Solid–liquid–solid growth mechanism of single-wall carbon nanotubes Original Research Article

397

Solid–liquid–solid process for forming free-standing gold nanowhisker superlattice by interfering femtosecond laser irradiation

398

Solid–liquid–vapor phases of water and water–carbon dioxide mixtures using a simple analytical equation of state

399

Solid-matrix luminescence analysis: photophysics, physicochemical interactions and applications Review Article

400

Solid-matrix luminescence in glucose and trehalose glasses with heavy-atom salts

401

Solid-matrix luminescence of heterocyclic aromatic amines in several new sugar-glass systems

402

Solid-medium-integrated impedimetric biosensor for real-time monitoring of microorganisms

403

Solid-on-solid model of overlayer-induced faceting

404

Solid-oxide fuel cell operated on in situ catalytic decomposition products of liquid hydrazine

405

Solid-Oxide-Fuel-Cell Performance and Durability: Resolution of the Effects of Power-Conditioning Systems and Application Loads

406

Solid-particle erosion and strength degradation of Si3N4/BN fibrous monoliths

407

Solid-particle erosion behavior of high-performance thermoplastic polymers

408

Solid-particle erosion of a geopolymer containing fly ash and blast-furnace slag

409

Solid-particle erosion of directionally solidified Al2O3–ZrO2 (Y2O3) eutectics

410

Solidparticleeffectsonheattransferinamulti-layeredmoltenpoolwithgasinjectionOriginalResearchArticle

411

Solid-phase access to polyhydroxypyrrolizidines by 1,3-dipolar cycloaddition of (S)-3-alkoxypyrroline N-oxide to maleate and crotonate derivatives

412

Solid-phase aldol condensations mediated by zinc acetate and 2,2′-bipyridine under weakly basic conditions

413

Solid-phase analogue synthesis of caspase-3 inhibitors via palladium-catalyzed amination of 3-bromopyrazinones

414

Solid-phase analysis method for (S)-[18F]fluorocarazolol and its metabolites

415

Solid-phase analytical derivatization of alkylphenols in fish bile for gas chromatography–mass spectrometry analysis

416

Solid-phase approach to the synthesis of cyclen scaffolds from cyclotetrapeptides

417

Solid-phase approach towards the synthesis of functionalized imidazo[1,2-b]pyrazol-2-ones

418

Solid-phase approaches toward cyclic oligomers

419

Solid-phase based synthesis of biologically promising triazolyl aminoacyl (peptidyl) penicillins

420

Solid-phase binding assays of peptides using EGFP-Src SH2 domain fusion protein and biotinylated Src SH2 domain

421

Solid-phase bioassays and soil microbial activities to evaluate PAH-spiked soil ecotoxicity after a long-term bioremediation process simulating landfarming Original Research Article

422

Solid-phase capture and release of arginine peptides by selective tagging and boronate affinity chromatography

423

Solid-phase carbohydrate synthesis via on-bead protecting group chemistry

424

Solid-phase C–C and C–O bond forming reactions using ‘Traceless’ π-arene–chromium linkers

425

Solid-phase chemical tools for glycobiology

426

Solid-phase clean-up in the liquid chromatographic determination of polycyclic aromatic hydrocarbons in edible oils

427

Solid-phase combinatorial approach for the optimization of soluble epoxide hydrolase inhibitors

428

Solid-phase combinatorial synthesis of 1,4-benzoxazin-3(4H)-one and 1,4-benzothiazin-3(4H)-one derivatives

429

Solid-phase combinatorial synthesis of 5-arylalkylidene rhodanine

430

Solid-phase combinatorial synthesis of benzothiazole and 2,3-dihydro-[1,5]-benzothiazepine derivatives

431

Solid-phase combinatorial synthesis of benzothiazoles, benzimidazoles, and benzoxazoles using a traceless linker

432

Solid-phase combinatorial synthesis of polyamine derivatives using aminoalcohol building blocks

433

Solid-phase construction: high efficiency dendrimer synthesis using AB3 isocyanate-type monomers

434

Solid-phase control on the mobility of potentially toxic elements in an abandoned lead/zinc mine tailings impoundment, Taxco, Mexico

435

Solid-phase controls on lead partitioning in laboratory bioleaching solutions

436

Solid-phase cross-coupling reaction of aryl(fluoro)silanes with 4-iodobenzoic acid

437

Solid-phase crystallization and dopant activation of amorphous silicon films by pulsed rapid thermal annealing

438

Solid-phase crystallization kinetics and grain structure during thermal annealing of a-Si:H grown by chemical vapor deposition

439

Solid-phase crystallization of amorphous Si films on glass and Si wafer Original Research Article

440

Solid-phase crystallization of amorphous silicon on ZnO:Al for thin-film solar cells

441

Solid-phase de novo synthesis of a (±)-2-deoxy-glycoside

442

Solid-Phase Decarburization of High-Carbon Ferromanganese Powders by Microwave Heating Original Research Article

443

Solid-phase DNA binding detection by EPR spectroscopy

444

Solid-phase domino syntheses of functionalized tetronates with Ph3PCCO

445

Solid-phase dynamic extraction for the enrichment of polar volatile organic compounds from water

446

Solid-phase effects on the performance of a centrifugal slurry pump using computational fluid dynamics

447

Solid-phase enzyme modification via affinity chromatography

448

Solid-phase epitaxial regrowth of a shallow amorphised Si layer studied by X-ray and medium energy ion scattering

449

Solid-phase epitaxy of CaSi2 on Si(1 1 1) and the Schottky-barrier height of CaSi2/Si(1 1 1)

450

Solid-phase extraction (SPE) of the fluorescence tracers uranine and sulphorhodamine B

451

Solid-phase extraction and amperometric determination of nitrite with polypyrrole nanowire modified electrodes

452

Solid-phase extraction and capillary electrophoresis determination of phenols from soil after alkaline CuO oxidation Original Research Article

453

Solid-phase extraction and determination of trace amount of some metal ions on Duolite XAD 761 modified with a new Schiff base as chelating agent in some food samples

454

Solid-phase extraction and gas chromatographic analysis of phenolic compounds in virgin olive oil

455

Solid-phase extraction and high-performance liquid chromatographic separation of pigments of red wines

456

Solid-Phase Extraction and High-Performance Liquid Chromatography Applied to the Determination of Quinapril and Its Metabolite Quinaprilat in Urine

457

Solid-phase extraction and HPLC determination of Ochratoxin A in cereals products on Chilean market

458

Solid-phase extraction and HPLC determination of patulin in apple juice concentrate

459

Solid-phase extraction and liquid chromatographic quantitation of quinfamide in biological samples

460

Solid-phase extraction and liquid chromatography/tandem mass spectrometry assay for the determination of pitavastatin in human plasma and urine for application to Phase I clinical pharmacokinetic studies

461

Solid-phase extraction and liquid chromatography–mass spectrometry for the determination of free fatty acids in shellfish

462

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

463

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns Original Research Article

464

Solid-phase extraction and sample stacking–capillary electrophoresis for the determination of quaternary ammonium herbicides in drinking water

465

Solid-phase extraction and sample stacking–micellar electrokinetic capillary chromatography for the determination of multiresidues of herbicides and metabolites

466

Solid-Phase Extraction and Simultaneous Determination of Tetracycline Residues in Edible Cattle Tissues Using an HPLC-FL Method

467

Solid-phase extraction and simultaneous determination of trace amounts of sulphonated and azo sulphonated dyes using microemulsion-modified-zeolite and multivariate calibration

468

Solid-phase extraction and simultaneous spectrophotometric determination of trace amounts of Co, Ni and Cu using partial least squares regression

469

Solid-phase extraction applied to the determination of ochratoxin A in wines by reversed-phase high-performance liquid chromatography

470

Solid-phase extraction approach for phospholipids profiling by titania-coated silica microspheres prior to reversed-phase liquid chromatography–evaporative light scattering detection and tandem mass spectrometry analysis

471

Solid-phase extraction clean-up of soil and sediment extracts for the determination of various types of pollutants in a single run

472

Solid-phase extraction combined with dispersive liquid–liquid microextraction for the determination for polybrominated diphenyl ethers in different environmental matrices

473

Solid-phase extraction combined with dispersive liquid–liquid microextraction-ultra preconcentration of chlorophenols in aqueous samples

474

Solid-phase extraction combined with headspace single-drop microextraction of chlorophenols as their methyl ethers and analysis by high-performance liquid chromatography-diode array detection

475

Solid-phase extraction combined with large volume injection-programmable temperature vaporization–gas chromatography–mass spectrometry for the multiresidue determination of priority and emerging organic pollutants in wastewater

476

Solid-phase extraction coupling to capillary electrophoresis with emphasis on environmental analysis

477

Solid-phase extraction followed by dispersive liquid–liquid microextraction for the sensitive determination of selected fungicides in wine

478

Solid-phase extraction followed by high-performance liquid chromatography–ionspray interface–mass spectrometry for monitoring of herbicides in environmental water

479

Solid-phase extraction followed by liquid chromatography quadrupole time-of-flight tandem mass spectrometry for the selective determination of fungicides in wine samples

480

Solid-phase extraction followed by liquid chromatography–tandem mass spectrometry for the determination of hydroxylated benzophenone UV absorbers in environmental water samples Original Research Article

481

Solid-phase extraction for combinatorial libraries

482

Solid-phase extraction for multiresidue analysis of organic contaminants in water

483

Solid-phase extraction for multiresidue determination of sulfonamides, tetracyclines, and pyrimethamine in Bovineʹs milk

484

Solid-phase extraction for picrocrocin determination in the quality control of saffron spice (Crocus sativus L.)

485

Solid-phase extraction for the simultaneous preconcentration of organic (selenocystine) and inorganic [Se(IV), Se(VI)] selenium in natural waters

486

Solid-phase extraction gas chromatography-ion trap-mass spectrometry qualitative method for evaluation of phenolic compounds in virgin olive oil and structural confirmation of oleuropein and ligstroside aglycons and their oxidation products

487

Solid-phase extraction method for the determination of free and conjugated phenol compounds in human urine

488

Solid-phase extraction of acidic herbicides

489

Solid-Phase Extraction of Amphiphiles Based on Mixed Hemimicelle/Admicelle Formation: Application to the Concentration of Benzalkonium Surfactants in Sewage and River Water

490

Solid-phase extraction of berries’ anthocyanins and evaluation of their antioxidative properties

491

Solid-phase extraction of bismuth, lead and nickel from seawater using silica gel modified with 3-aminopropyltriethoxysilane filled in a syringe prior to their determination by graphite furnace atomic absorption spectrometry

492

Solid-phase extraction of carotenoids

493

Solid-phase extraction of esculetin from the ash bark of Chinese traditional medicine by using molecularly imprinted polymers

494

Solid-phase extraction of fluoroquinolones from aqueous samples using a water-compatible stochiometrically imprinted polymer

495

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

496

Solid-phase extraction of methadone enantiomers and benzodiazepines in biological fluids by two polymeric cartridges for liquid chromatographic analysis

497

Solid-phase extraction of ochratoxin A from wine based on a binding hexapeptide prepared by combinatorial synthesis

498

Solid-phase extraction of organic compounds in atmospheric aerosol particles collected with the particle-into-liquid sampler and analysis by liquid chromatography–mass spectrometry

499

Solid-phase extraction of phenols

500

Solid-phase extraction of polar compounds with a hydrophilic copolymeric sorbent

501

Solid-phase extraction of polar hydrophilic aromatic sulfonates followed by capillary zone electrophoresis–UV absorbance detection and ion-pair liquid chromatography–diode array UV detection and electrospray mass spectrometry

502

Solid-phase extraction of polycyclic aromatic compounds

503

SOLID-PHASE EXTRACTION OF POLYCYCLIC AROMATIC HYDROCARBONS FROM AQUEOUS SAMPLES USING POLYURETHANE FOAMS IN CONNECTION WITH SOLID-MATRIX SPECTROFLUORIMETRY

504

Solid-phase extraction of polycyclic aromatic hydrocarbons in surface water: Negative effect of humic acid

505

Solid-phase extraction of quaternary ammonium herbicides

506

Solid-phase extraction of soy isoflavones

507

Solid-phase extraction of sugar cane soot extract for analysis by gas chromatography with flame ionisation and mass spectrometric detection

508

Solid-phase extraction of tanshinones from Salvia Miltiorrhiza Bunge using ionic liquid-modified silica sorbents

509

Solid-phase extraction of tramadol from plasma and urine samples using a novel water-compatible molecularly imprinted polymer

510

Solid-phase Extraction of Valproic Acid Using a Surfaced Imprinted Silica Gel Adsorbent

511

Solid-phase extraction on C18 silica as a purification strategy in the solution synthesis of a 1-thio-β-d-galactopyranoside library Original Research Article

512

Solid-phase extraction on sorbents of different retention mechanisms followed by determination by gas chromatography–mass spectrometric and gas chromatography–electron capture detection of pesticide residues in crops

513

Solid-phase extraction or liquid chromatography coupled on-line with gas chromatography in the analysis of biological samples

514

Solid-phase extraction procedure for determination of phenolic acids and some flavonols in honey

515

Solid-phase extraction procedure to remove organic acids from honey

516

Solid-phase extraction sorbent consisting of alkyltrimethylammonium surfactants immobilized onto strong cation-exchange polystyrene resin

517

Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry

518

Solid-phase Extraction Using Modified Carbon Nanotube and Cupferron Ligand for Preconcentration and Determination of Trace Amounts of Copper in Real Samples

519

Solid-phase extraction using molecularly imprinted polymer for selective extraction of natural and synthetic estrogens from aqueous samples

520

Solid-phase extraction using molecularly imprinted polymers for selective extraction of a mycotoxin in cereals

521

Solid-phase extraction versus matrix solid-phase dispersion: Application to white grapes

522

Solid-phase extraction versus solid-phase microextraction for the determination of chlorinated paraffins in water using gas chromatography–negative chemical ionisation mass spectrometry

523

Solid-phase extraction with a dibutylmelamine-imprinted polymer as triazine herbicide-selective sorbent

524

Solid-phase extraction with C30 bonded silica for analysis of polycyclic aromatic hydrocarbons in airborne particulate matters by gas chromatography–mass spectrometry

525

Solid-phase extraction with styrene–divinylbenzene sorbent for high-performance liquid or gas chromatographic determination of urinary chloro- and methylthiotriazines

526

Solid-phase extraction; Palladium(II); Halloysite nanotube; Inductively coupled plasma-optical emission spectrometry

527

Solid-phase extraction-capillary electrophoresis-mass spectrometry for the determination of tetracyclines residues in surface water by using carbon nanotubes as sorbent material

528

Solid-phase extraction-fluorimetric high performance liquid chromatographic determination of domoic acid in natural seawater mediated by an amorphous titania sorbent Original Research Article

529

Solid-phase extraction-gas chromatography and solid-phase extraction-gas chromatography–mass spectrometry determination of corrosion inhibiting long-chain primary alkyl amines in chemical treatment of boiler water in water-steam systems of power plants

530

Solid-phase extraction–gas chromatography–mass spectrometry using a fullerene sorbent for the determination of inorganic mercury(II), methylmercury(I) and ethylmercury(I) in surface waters at sub-ng/ml levels

531

Solid-phase extraction–gas chromatography–mass spectrometry using a fullerene sorbent for the determination of inorganic mercury(II), methylmercury(I) and ethylmercury(I) in surface waters at sub-ng/ml levels

532

Solid-phase extraction–high-performance liquid chromatography–ion trap mass spectrometry for analysis of trace concentrations of macrolide antibiotics in natural and waste water matrices

533

Solid-phase extraction–liquid chromatographic method for the determination and pharmacokinetic studies of albiflorin and paeoniflorin in rat serum after oral administration of Si–Wu decoction

534

Solid-phase extraction–thin-layer chromatography–gas chromatography method for the detection of hazelnut oil in olive oils by determination of esterified sterols

535

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

536

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples Original Research Article

537

Solid-Phase Formation of Interstellar Vinyl Alcohol

538

Solid-phase Friedel–Crafts acylation on polystyrene resins-synthesis of antiepiletic 1-aryl-3,5-dihydro-4H-2,3-benzodiazepin-4-ones

539

Solid-phase FT-Raman determination of caffeine in energy drinks Original Research Article

540

Solid-phase iodine as an oxidant in flow injection analysis: determination of ascorbic acid in pharmaceuticals and foods by background correction

541

Solid-phase library synthesis of reversed-statine type inhibitors of the malarial aspartyl proteases plasmepsin I and II Original Research Article

542

Solid-phase lipid synthesis (SPLS)-2: incidental discovery of organogelators based on artificial glycolipids

543

Solid-phase lithiation of 5-carboxyindoles

544

Solid-phase microcolumn extraction and gas chromatography–mass spectrometry identification of volatile organic compounds emitted by paper

545

Solid-phase microextraction – gas chromatography mass spectrometry: A fast and simple screening method for the assessment of organophosphorus pesticides residues in wine and fruit juices

546

Solid-phase microextraction (SPME) for the determination of pyrethroids in cucumber and watermelon using liquid chromatography combined with post-column photochemically induced fluorimetry derivatization and fluorescence detection Original Research Articl

547

Solid-phase microextraction and chiral HPLC analysis of ibuprofen in urine

548

Solid-phase microextraction and gas chromatography with atomic emission detection for multiresidue determination of pesticides in honey Original Research Article

549

Solid-phase microextraction and gas chromatography–mass spectrometry analysis of p,p′-DDE in biological samples

550

Solid-phase microextraction and gas chromatography–mass spectrometry for the rapid screening of triazole residues in wine and strawberries

551

Solid-phase microextraction and gas chromatography–mass spectrometry of volatile compounds from avocado puree after microwave processing

552

Solid-phase microextraction and liquid chromatography/mass spectrometry in drug analysis Review Article

553

Solid-phase microextraction and sample stacking micellar electrokinetic chromatography for the analysis of pesticide residues in red wines

554

Solid-phase microextraction as a clean-up and preconcentration procedure for organochlorine pesticides determination in fish tissue by gas chromatography with electron capture detection

555

Solid-phase microextraction based on polypyrrole films with different counter ions

556

Solid-phase microextraction based on polypyrrole films with different counter ions Original Research Article

557

Solid-phase microextraction combined with gas chromatography and atomic emission detection for the determination of cyclopentadienylmanganese tricarbonyl and (methylcyclopentadienyl)manganese tricarbonyl in soils and seawaters

558

Solid-phase microextraction coupled to gas chromatography for the determination of 2,3-dimethyl-2,3-dinitrobutane as a marking agent for explosives

559

Solid-phase microextraction coupled to high-performance liquid chromatography to determine phenolic compounds in water samples

560

Solid-phase microextraction coupled to liquid chromatography for the analysis of phenolic compounds in water

561

Solid-phase microextraction coupled with atomic emission spectroscopy––rapid screening for volatile chlorinated compounds

562

Solid-phase microextraction coupled with capillary electrophoresis for the determination of propranolol enantiomers in urine using a sol–gel derived calix[4]arene fiber

563

Solid-phase microextraction coupled with capillary electrophoresis to determine ephedrine derivatives in water and urine using a sol–gel derived butyl methacrylate/silicone fiber

564

Solid-phase microextraction coupled with high performance liquid chromatography using on-line diode-array and electrochemical detection for the determination of fenitrothion and its main metabolites in environmental water samples

565

Solid-phase microextraction coupled with high-performance liquid chromatography for the analysis of heterocyclic aromatic amines

566

Solid-phase microextraction coupled with high-performance liquid chromatography for the determination of phenylurea herbicides in aqueous samples

567

SOLID-PHASE MICROEXTRACTION DETERMINATION OF ALCOHOL USING PENCIL LEAD

568

Solid-phase microextraction fiber development for sampling and analysis of volatile organohalogen compounds in air

569

Solid-phase microextraction fibre–water distribution constants of more hydrophobic organic compounds and their correlations with octanol–water partition coefficients

570

Solid-phase microextraction followed by gas chromatography for the speciation of organotin compounds in honey and wine samples: A comparison of atomic emission and mass spectrometry detectors

571

Solid-phase microextraction followed by gas chromatography for the speciation of organotin compounds in honey and wine samples: A comparison of atomic emission and mass spectrometry detectors

572

Solid-phase microextraction followed by gas chromatography–mass spectrometry for the determination of ink photo-initiators in packed milk

573

Solid-phase microextraction for determining the distribution of sixteen US Environmental Protection Agency polycyclic aromatic hydrocarbons in water samples

574

Solid-phase microextraction for headspace analysis of key volatile compounds in orange beverage emulsion

575

Solid-phase microextraction for herbicide determination in environmental samples

576

Solid-phase microextraction for organochlorine pesticide residues analysis in Chinese herbal formulations

577

Solid-phase microextraction for qualitative and quantitative determination of migrated degradation products of antioxidants in an organic aqueous solution

578

Solid-phase microextraction for the analysis of biological samples

579

Solid-phase microextraction for the analysis of short-chain chlorinated paraffins in water samples

580

Solid-phase microextraction for the detection of termite cuticular hydrocarbons

581

Solid-phase microextraction for the determination of haloanisoles in wines and other alcoholic beverages using gas chromatography and atomic emission detection

582

Solid-phase microextraction for the determination of systemic and non-volatile pesticides in river water using gas chromatography with nitrogen–phosphorous and electron-capture detection

583

Solid-phase microextraction for the investigation of sex pheromone of Eucosma notanthes Meyrick

584

Solid-phase microextraction from small volumes of sample in a glass capillary

585

Solid-phase microextraction gas chromatography–mass spectrometry (HS-SPME-GC–MS) determination of volatile compounds in orujo spirits: Multivariate chemometric characterisation

586

Solid-phase microextraction in bioanalysis: New devices and directions

587

Solid-phase microextraction in biomedical analysis

588

Solid-phase microextraction in pesticide residue analysis

589

Solid-Phase Microextraction Liquid Chromatography/Tandem Mass Spectrometry To Determine Postharvest Fungicides in Fruits

590

Solid-phase microextraction method for gas chromatography with mass spectrometric and pulsed flame photometric detection: studies of organoarsenical speciation

591

Solid-Phase Microextraction Method for Headspace Analysis of Volatile Compounds in Bread Crumb.

592

Solid-phase microextraction method for the determination of atrazine and four organophosphorus pesticides in soil samples by gas chromatography

593

Solid-phase microextraction method for the determination of volatile compounds associated to oxidation of fish muscle

594

Solid-phase microextraction Ni–Ti fibers coated with functionalised silica particles immobilized in a sol–gel matrix

595

Solid-phase micro-extraction of drugs from biological matrices

596

Solid-phase microextraction of hop volatiles: Potential use for determination and verification of hop varieties

597

Solid-phase microextraction of monocyclic aromatic amines using novel fibers coated with crown ether

598

Solid-phase microextraction of N-nitrosamines

599

Solid-phase microextraction of N-nitrosodimethylamine in beer

600

Solid-phase microextraction of phthalate esters from aqueous media by electrochemically deposited carbon nanotube/polypyrrole composite on a stainless steel fiber Original Research Article

601

Solid-phase microextraction of phthalate esters from aqueous media by electrophoretically deposited TiO2 nanoparticles on a stainless steel fiber

602

Solid-phase microextraction of phthalates from water

603

Solid-phase microextraction of volatile compounds from flowers of two Brunfelsia species

604

Solid-phase microextraction of volatile compounds in “Terrincho” ewe cheese: Comparison of different fibers

605

Solid-phase microextraction on-fiber derivatization for the analysis of some polyphenols in wine and grapes using gas chromatography–mass spectrometry

606

Solid-phase microextraction under controlled agitation conditions for rapid on-site sampling of organic pollutants in water

607

Solid-phase microextraction using octadecyl-bonded silica immobilized on the surface of a rotating disk: Determination of hexachlorobenzene in water Original Research Article

608

Solid-phase microextraction using pencil lead as sorbent for analysis of organic pollutants in water

609

Solid-phase microextraction using poly(pyrrole) film and liquid chromatography with UV detection for analysis of antidepressants in plasma samples

610

Solid-phase microextraction versus single-drop microextraction for the analysis of nitroaromatic explosives in water samples

611

Solid-phase microextraction with on-fiber derivatization for the analysis of anti-inflammatory drugs in water samples

612

Solid-phase microextraction with on-fiber derivatization for the determination of hydroxy-polychlorinated biphenyl compounds in urine Original Research Article

613

Solid-phase microextraction with on-fiber silylation for simultaneous determinations of endocrine disrupting chemicals and steroid hormones by gas chromatography–mass spectrometry

614

Solid-phase microextraction with on-fibre derivatisation applied to the analysis of volatile carbonyl compounds

615

Solid-phase microextraction with simultaneous oxidative sample treatment for the sensitive determination of tetra- to hexa-brominated diphenyl ethers in sediments

616

Solid-phase microextraction: a promising technique for sample preparation in environmental analysis

617

Solid-phase microextraction–gas chromatographic–mass spectrometric analysis of garlic oil obtained by hydrodistillation

618

Solid-phase microextraction–gas chromatographic–mass spectrometric method for the determination of the fungicides cyprodinil and fludioxonil in white wines

619

Solid-phase microextraction–gas chromatographic–tandem mass spectrometric analysis of polycyclic aromatic hydrocarbons: Towards the European Union water directive 2006/0129 EC

620

Solid-phase microextraction–gas chromatography mass spectrometry and multivariate analysis for the characterization of roasted coffees

621

Solid-phase microextraction—Gas chromatography to determine volatile organic sulfur compounds in the air at sewage treatment plants

622

Solid-phase micro-extraction–gas chromatography–(tandem) mass spectrometry as a tool for pesticide residue analysis in water samples at high sensitivity and selectivity with confirmation capabilities

623

Solid-phase micro-extraction–gas chromatography–mass spectrometry and headspace-gas chromatography of tetrahydrocannabinol, amphetamine, methamphetamine, cocaine and ethanol in saliva samples

624

Solid-phase microextraction–gas chromatography–mass spectrometry for the analysis of selective serotonin reuptake inhibitors in environmental water

625

Solid-phase microextraction–gas chromatography–mass spectrometry method validation for the determination of endogenous substances: Urinary hexanal and heptanal as lung tumor biomarkers Original Research Article

626

Solid-phase microextraction–gas chromatography–mass spectrometry of biologically active substances in water samples

627

Solid-phase microextraction–gas chromatography–time-of-flight mass spectrometry utilized for the evaluation of the new-generation super elastic fiber assemblies Original Research Article

628

Solid-phase microextraction-high performance liquid chromatography and diode array detection for the determination of mycophenolic acid in cheese

629

Solid-phase microextraction–liquid chromatography (SPME–LC) determination of fluoxetine and norfluoxetine in plasma using a heated liquid flow through interface

630

Solid-Phase Microextraction-Mass Spectrometry: A New Approach to the Rapid Characterization of Cheeses

631

Solid-phase modification with succinic polyethyleneglycol of aminated lipase B from Candida antarctica: Effect of the immobilization protocol on enzyme catalytic properties

632

Solid-phase molecularly imprinted on-line preconcentration and voltammetric determination of sulfamethazine in milk Original Research Article

633

Solid-phase molecularly imprinted pre-concentration and spectrophotometric determination of isoxicam in pharmaceuticals and human serum

634

Solid-phase nano extraction as a green approach for the analyte isolation

635

Solid-phase optimisation of achiral amidinobenzyl indoles as potent and selective factor Xa inhibitors

636

Solid-phase parallel synthesis applied to lead optimization: Discovery of potent analogues of the GPIIb/IIIa antagonist RWJ-50042

637

Solid-phase parallel synthesis of 2-aminoimidazolidin-4-ones

638

Solid-phase parallel synthesis of azarene pyrrolidinones as factor Xa inhibitors

639

Solid-phase parallel synthesis of substituted dihydroimidazolyl dihydrobenzimidazol-2-ones

640

Solid-phase parallel synthesis of substituted dihydroimidazolylbutyl dihydroimidazol-3-ium salts

641

Solid-phase parallel synthesis of trisubstituted dihydroimidazolyl dihydroquinoxalin-2(1H)-ones

642

Solid-phase PEGylation of an immobilized protein cage on polyelectrolyte multilayer

643

Solid-phase peptide synthesis in highly loaded conditions

644

Solid-phase peptide synthesis in water. Part 3: A water-soluble N-protecting group, 2-[phenyl(methyl)sulfonio]ethoxycarbonyl tetrafluoroborate, and its application to solid phase peptide synthesis in water

645

Solid-phase Petasis multicomponent reaction for the generation of β-lactams 3-substituted with non-proteinogenic α-amino acids

646

Solid-phase Phosphorus Pools in Highly Organic Carbonate Sediments of Northeastern Florida Bay

647

Solid-phase phosphorus speciation in Saharan Bodélé Depression dusts and source sediments

648

Solid-phase photocatalytic degradation of polystyrene plastic with goethite modified by boron under UV–vis light irradiation

649

Solid-phase photocatalytic degradation of polystyrene with modified nano-TiO2 catalyst

650

Solid-phase photocatalytic degradation of PVC by Tungstophosphoric acid—a novel method for PVC plastic degradation Original Research Article

651

Solid-phase polyethylene glycol conjugation using hydrophobic interaction chromatography

652

Solid-phase preparation of amides using N-acylbenzotriazoles

653

Solid-phase reaction synthesis of mesostructured tungsten disulfide material with a high specific surface area

654

Solid-phase reactor with copper(II) phosphate for flow-injection spectrophotometric determination of aspartame in tabletop sweeteners Original Research Article

655

Solid-Phase Refolding of Cyclodextrin Glycosyltransferase Adsorbed on Cation-Exchange Resin

656

Solid-Phase Reversible Immobilization in Microfluidic Chips for the Purification of Dye-Labeled DNA Sequencing Fragments

657

Solid-phase sodium bismuthate as an oxidant in flow injection analysis: determination of manganese in effluent streams Original Research Article

658

Solid-phase spectrofluorimetric determination of acetylsalicylic acid and caffeine in pharmaceutical preparations using partial least-squares multivariate calibration

659

Solid-phase spectrophotometric and test determination of silicate in natural water

660

Solid-phase spectrophotometric determination of nickel in water and vegetable samples at sub-μg l−1 level with o-carboxylphenyldiazoaminoazobenzene loaded XAD-4

661

Solid-phase spectrophotometric determination of trace amounts of hydrazine at sub-ng ml−1 level

662

Solid-phase stereoselective synthesis of 2′-O-methyl-oligoribonucleoside phosphorothioates using nucleoside bicyclic oxazaphospholidines

663

Solid-Phase Substitution of Ammonia in Hexaamine Heteroligand Complexes of Chromium(III) with Cyclic Tetraamines

664

Solid-phase supported profluorescent nitroxide probe for the determination of aerosol-borne reactive oxygen species

665

Solid-phase Suzuki cross-coupling reactions using a phosphine ligand based on a phospha-adamantane framework

666

Solid-phase syntheses of constrained RGD scaffolds and their binding to the αvβ3 integrin receptor

667

Solid-phase syntheses of N-substituted carbamates. Reaction monitoring by gel-phase 13C NMR using a 13C enriched BAL-linker

668

Solid-phase synthesis (SPS) of substituted uracils via Oxone® cleavage methodology

669

Solid-phase synthesis and antibacterial activity of hydroxycinnamic acid amides and analogues against methicillin-resistant Staphylococcus aureus and vancomycin-resistant S. aureus

670

Solid-phase synthesis and antibacterial evaluations of N-demethylvancomycin derivatives

671

Solid-phase synthesis and anti-infective activity of a combinatorial library based on the natural product anisomycin

672

Solid-phase synthesis and bioevaluation of Lupeol-based libraries as antimalarial agents

673

Solid-phase synthesis and biological evaluation of a parallel library of 2,3-dihydro-1,5-benzothiazepines Original Research Article

674

Solid-phase synthesis and biological evaluation of a uridinyl branched peptide urea library

675

Solid-phase synthesis and characterization of regioregular head-to-tail coupled oligo(3-p-tolylthiophene)s

676

Solid-phase synthesis and combinatorial technologies by P. Seneci, Wiley-Interscience, New York, 2000, xii+637 pp.; £70.95; ISBN: 0-471-33195-3

677

Solid-phase synthesis and conformational properties of angiotensin converting enzyme catalytic-site peptides: The basis for a structural study on the enzyme-substrate interaction

678

Solid-Phase Synthesis and Cyclative Cleavage of Quorum Sensing Depsipeptide Analogues by Acylphenyldiazene Activation

679

Solid-Phase synthesis and investigation of benzofurans as selective estrogen receptor modulators

680

Solid-Phase synthesis and pharmacological evaluation of analogues of PhTX-12—A potent and selective nicotinic acetylcholine receptor antagonist

681

Solid-phase synthesis and SAR of 4-carboxy-2-azetidinone mechanism-based tryptase inhibitors

682

Solid-phase synthesis and solution structure of bicyclic β-turn peptidomimetics: diversity at the i position

683

Solid-phase synthesis and structure–activity relationships of novel biarylethers as melanin-concentrating hormone receptor-1 antagonists

684

Solid-phase synthesis and thermal denaturation study of cyclic PNAs targeting the HIV-1 TAR RNA loop

685

Solid-phase synthesis and utilization of side-chain reactive unnatural amino acids

686

Solid-phase synthesis development of a thymidinyl and 2′-deoxyuridinyl Ugi library for anti-bacterial agent screening

687

Solid-phase synthesis of [1,2,4]triazolo[3,4-a]phthalazine and tetrazolo[5,1-a]phthalazine derivatives

688

Solid-phase synthesis of ‘diverse’ heterocycles

689

Solid-phase synthesis of 1,2,4-triazolidine-3,5-diones

690

Solid-phase synthesis of 1,2,5-trisubstituted imidazolidin-4-ones

691

Solid-phase synthesis of 1,3,4-oxadiazoline-5-thione derivatives from resin-bound acylhydrazines

692

Solid-phase synthesis of 1,3-diamino ketones

693

Solid-phase synthesis of 1,3-diamino ketones

694

Solid-phase synthesis of 1,3-diamino ketones

695

Solid-phase synthesis of 1,3-disubstituted 2-thioxoquinazoline-4-ones using SNAr reaction

696

Solid-phase synthesis of 1,3-oxazolidine derivatives

697

Solid-phase synthesis of 1,4-diketones by thiazolium salt promoted addition of aldehydes to chalcones

698

Solid-phase synthesis of 1,5-substituted 2-(N-alkylamino)-imidazolidin-4-ones

699

Solid-phase synthesis of 15N-labeled acylpentamines as reference compounds for the MS/MS investigation of spider toxins

700

Solid-phase synthesis of 1-substituted 4,5-dihydro-1,2,4-triazin-6-ones

701

Solid-phase synthesis of 2,3,4,5-tetrahydro-1H-benzo[e][1,4]diazepine derivatives

702

Solid-phase synthesis of 2,3,5-trisubstituted 4H-imidazolones

703

Solid-phase synthesis of 2,3-diphenylpropionic acid library as VLA-4 antagonists

704

Solid-phase synthesis of 2,3-disubstituted indoles: discovery of a novel, high-affinity, selective h5-HT2A antagonist

705

Solid-phase synthesis of 2,6- and 2,7-diamino-4(3H)-quinazolinones via palladium-catalyzed amination

706

Solid-phase synthesis of 2,6,8-trisubstituted purines

707

Solid-phase synthesis of 2-alkylidene-6-alkyl-imidazo[2,1-b]thiazole-3,5[2H,6H]-dione derivatives

708

Solid-phase synthesis of 2-amino-3-chloro-5- and 8-nitro-1,4-naphthoquinones: a new and general colorimetric test for resin-bound amines

709

Solid-phase synthesis of 2-aminoimidazolinones

710

Solid-phase synthesis of 2-aminoimidazolinones

711

Solid-phase synthesis of 2-aminoimidazolinones

712

Solid-phase synthesis of 2-cyanoquinazolin-4(3H)-one and 2,3-dihydrooxazolo[2,3-b]quinazolin-5-one derivatives utilizing resin-bound anthranilic acid derivatives

713

Solid-phase synthesis of 2-imidazolidinethiones via Mitsunobu reaction of N-(2-hydroxyethyl)thioureas

714

Solid-phase synthesis of 2-substituted-3-(substituted sulfanyl)-1,2,4-benzothiadiazine 1,1-dioxide library

715

Solid-phase synthesis of 3,4-dihydro-2(1H)-quinazolinones and 3,4-dihydro-1H-quinazolin-2-thiones

716

Solid-phase synthesis of 3,4-dihydroquinazoline derivatives

717

Solid-phase synthesis of 3,7-disubstituted perhydro-1,4-diazepine-2,5-diones from amino acids and β-amino acids

718

Solid-phase synthesis of 3-alkyl-2-arylamino-3,4-dihydroquinazolines

719

Solid-phase synthesis of 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-thiones and 3-alkyl-8-arylamino-1H-imidazo[4,5-g]quinazolin-2(3H)-ones

720

Solid-phase synthesis of 3-amino-1,2,4-triazoles

721

Solid-phase synthesis of 3-aminohydantoin, dihydrouracil, thiohydantoin and dihydrothiouracil derivatives

722

Solid-phase synthesis of 3-aryl-3-oxo-propan amides by reaction of lithium enolates with 4-nitrophenyl carbamate resin or polymer-bound isocyanate

723

Solid-phase synthesis of 3-hydroxymethyl isoxazoles via resin bound nitrile oxides

724

Solid-phase synthesis of 4-aminopiperidine analogues using the Alloc protecting group: an investigation of Alloc removal from secondary amines

725

Solid-phase synthesis of 4-aryl substituted 5-carboxy-6-methyl-3,4-dihydropyridones

726

Solid-phase synthesis of 4-aryl-1,4-dihydropyridines via the Hantzsch three component condensation

727

Solid-phase synthesis of 4-biaryl-piperidine-4-carboxamides

728

Solid-phase synthesis of 4H-2-(3-hydroxy-4-methoxyphenyl)-naphtho[1,2-b]pyran-1-one

729

Solid-Phase synthesis of 4-substituted imidazoles using a scaffold approach

730

Solid-phase synthesis of 4-triphenylphosphoranylidene-4,5-dihydropyrazol-5-ones, 4-aminocarbonyl-pyrroles, 4-methoxy-1H-pyrazol-5(2H)-ones and 2-thiazolin-4-ones from polymer-bound 1,2-diaza-1,3-butadienes

731

Solid-phase synthesis of 5-(3-indolyl)oxazoles that inhibit lipid peroxidation

732

Solid-phase synthesis of 5′-O-β,γ-methylenetriphosphate derivatives of nucleosides and evaluation of their inhibitory activity against HIV-1 reverse transcriptase

733

Solid-phase synthesis of 5-aminotetrazoles

734

Solid-phase synthesis of 5-arylhistidines via a microwave-assisted Suzuki–Miyaura cross-coupling

735

Solid-phase synthesis of 6-hydroxy-2,4-diaminoquinazolines

736

Solid-phase synthesis of a 5′-terminal TMG-capped trinucleotide block of U1 snRNA

737

Solid-phase synthesis of a combinatorial library of dihydroceramide analogues and its activity in human alveolar epithelial cells Original Research Article

738

Solid-phase synthesis of a focused library of trypanothione reductase inhibitors

739

Solid-phase synthesis of a folate conjugate of a DNA binding polyamide

740

Solid-phase synthesis of a glycosylated hexapeptide of human sialophorin, using the trichloroacetimidate method

741

Solid-phase synthesis of a glycosylated peptide fragment of the IL-8 receptor containing two vicinal oligosaccharide chains

742

Solid-Phase synthesis of a library constructed of aromatic phosphate, long alkyl chains and tryptophane components, and identification of potent dipeptide telomerase inhibitors

743

Solid-phase synthesis of a library of C-terminal agmatine dipeptides using a backbone amide linker (BAL) strategy

744

Solid-phase synthesis of a library of piperazinediones and diazepinediones via kaiser oxime resin

745

Solid-phase synthesis of a N-carboxyalkyl tripeptide combinatorial library

746

Solid-phase synthesis of a new class of oligosaccharide analogues based on azasugars

747

Solid-phase synthesis of a pentavalent GalNAc-containing glycopeptide (Tn antigen) representing the nephropathy-associated IgA hinge region Original Research Article

748

Solid-phase synthesis of a pepticinnamin E Library Original Research Article

749

Solid-phase synthesis of a selective αvβ3 integrin antagonist library

750

Solid-phase synthesis of a small library of 3-phenylthio-3-nicotinyl propionic acid derivatives acting as antagonists of the integrin αVβ3

751

Solid-phase synthesis of a type II′ β-turn peptido-mimetic library

752

Solid-phase synthesis of acridine-based threading intercalator peptides

753

Solid-phase synthesis of acyl biarylsulfonamides

754

Solid-phase synthesis of Agel 416; a novel approach to modified polyamines

755

Solid-phase synthesis of amidines by the reduction of amidoximes

756

Solid-phase synthesis of amino amides and peptide amides with unnatural side chains

757

Solid-phase synthesis of an apoptosis-inducing tetrapeptide mimicking the Smac protein

758

Solid-phase synthesis of an arylsulfone hydroxamate library

759

Solid-phase synthesis of an N-(phenylalkyl)cinnamide library via Horner–Wadsworth–Emmons reaction

760

Solid-phase synthesis of an O-linked glycopeptide based on a benzyl-protected glycan approach

761

Solid-phase synthesis of aryl ethers on high loading dendrimer resin

762

Solid-phase synthesis of aryl, heteroaryl, and sterically hindered alkyl amines using the Curtius rearrangement

763

Solid-phase synthesis of arylalkanolamines

764

Solid-phase synthesis of asymmetric cyanine dyes

765

Solid-phase synthesis of backbone-modified DNA analogs by the boranophosphotriester method using new protecting groups for nucleobases

766

Solid-phase synthesis of benzazoles, quinazolines, and quinazolinones using an alkoxyamine linker

767

Solid-phase synthesis of benzimidazole libraries biased for RNA targets

768

Solid-phase synthesis of benzimidazole N-oxides on SynPhase™ Lanterns

769

Solid-phase synthesis of benzisothiazolones as serine protease inhibitors

770

Solid-phase synthesis of benzodiazepinediones mimicking the C-terminus of the H-Ras protein

771

Solid-phase synthesis of benzothiazoles using an alkoxyamine linker

772

Solid-phase synthesis of biaryl cyclic peptides by borylation and microwave-assisted intramolecular Suzuki–Miyaura reaction

773

Solid-phase synthesis of biarylalanines via Suzuki cross-coupling and intramolecular N-acyliminium Pictet–Spengler reactions

774

Solid-phase synthesis of bis-cyclic guanidines from tripeptides

775

Solid-phase synthesis of branched thiohydantoin benzimidazolinethiones and branched thiohydantoin tetrahydroquinoxalinediones

776

Solid-phase synthesis of c(RGDfK) derivatives: on-resin cyclisation and lysine functionalisation

777

Solid-phase synthesis of carbohydrate and phosphodiester modified 2′–5′ oligoadenylate analogs

778

Solid-phase synthesis of CD52 glycopeptide and an efficient route to Asn-core pentasaccharide conjugate Original Research Article

779

Solid-phase synthesis of core 2 O-linked glycopeptide and its enzymatic sialylation

780

Solid-phase synthesis of core 3 and core 6 O-glycan-linked glycopeptides by benzyl-protection method

781

Solid-phase synthesis of C-terminal peptide aldehydes from amino acetals anchored to a backbone amide linker (BAL) handle

782

Solid-phase synthesis of C-terminal peptide amides from N-tetrachlorophthaloyl protected amino acids

783

Solid-phase synthesis of C-terminal thio-linked glycopeptides

784

Solid-phase synthesis of cyclic alkoxyketones, inhibitors of the cysteine protease cathepsin K

785

Solid-phase synthesis of cyclic polyamines

786

Solid-phase synthesis of cyclic RGD-furanoid sugar amino acid peptides as integrin inhibitors

787

Solid-phase synthesis of cyclic sulfonamides employing a ring-closing metathesis–cleavage strategy

788

Solid-phase synthesis of dehydropeptide, AM-toxin II, using a novel selenyl linker by side-chain tethered strategy

789

Solid-phase synthesis of di- and tripeptidic hydroxamic acids as inhibitors of procollagen C-proteinase

790

Solid-Phase synthesis of diamine and polyamine amino acid derivatives as HIV-1 tat-TAR binding inhibitors Original Research Article

791

Solid-phase synthesis of diaryl ketones through a three-component Stille coupling reaction

792

Solid-phase synthesis of dibenzoxazepinones

793

Solid-Phase Synthesis of Disubstituted 1,3-Dihydro-2H-imidazol-2-ones

794

Solid-Phase Synthesis of DNA Binding Polyamides on Oxime Resin Original Research Article

795

Solid-phase synthesis of DNA-interactive pyrrolo[2,1-c][1,4]benzodiazepines

796

Solid-phase synthesis of dual α4β1/α4β7 integrin antagonists: two scaffolds with overlapping pharmacophores

797

Solid-Phase synthesis of endothelin receptor antagonists

798

Solid-phase synthesis of five-dimensional libraries via a tandem Petasis–Ugi multi-component condensation reaction

799

Solid-Phase synthesis of FKBP12 inhibitors: N-Sulfonyl and N-Carbamoylprolyl/pipecolyl amides

800

Solid-phase synthesis of functionalized 1,2,3-triazoles

801

Solid-phase synthesis of functionalized 1,2,4-triazin-6-ones

802

Solid-phase synthesis of functionalized tropane derivatives via 1,3-dipolar cycloaddition

803

Solid-phase synthesis of fused [2,1-b]quinazolinone alkaloids

804

Solid-phase synthesis of glycopeptide carrying a tetra-N-acetyllactosamine-containing core 2 decasaccharide

805

Solid-phase synthesis of head and tail bis-acridinylated peptides

806

Solid-phase synthesis of hybrid thiazolidinedione-fatty acid PPARγ ligands

807

Solid-phase synthesis of hydrazinopeptides in Boc and Fmoc strategies monitored by HR-MAS NMR

808

Solid-phase synthesis of hydroxy-acids leading to macrolactones

809

Solid-phase synthesis of hydroxypiperazine derivatives using phenethylamine linker by oxidation–Cope elimination

810

Solid-phase synthesis of hydroxyproline-based cyclic hexapeptides

811

Solid-phase synthesis of imidazo[1,2-a]pyridines and imidazo[1,2-a]pyrimidines

812

Solid-phase synthesis of imidazoquinazolinone derivatives with three-point diversity

813

Solid-phase synthesis of indolines via palladium-catalyzed cyclization

814

Solid-phase synthesis of irreversible human rhinovirus 3C protease inhibitors. Part 1: Optimization of tripeptides incorporating N-terminal amides Original Research Article

815

Solid-phase synthesis of isoindolines via a rhodium-catalyzed [2+2+2] cycloaddition

816

Solid-phase synthesis of isoindolinones and naturally-occurring benzobutyrolactones (phthalides) using a cyclative-cleavage approach

817

Solid-phase synthesis of isoquinolinones using Bischler–Napieralski cyclization

818

Solid-phase synthesis of kojic acid-tripeptides and their tyrosinase inhibitory activity, storage stability, and toxicity

819

Solid-phase synthesis of lamellarins Q and O

820

Solid-phase synthesis of linear and cyclic peptides containing a calix[4]arene amino acid

821

Solid-phase synthesis of liquid crystalline isoxazole library

822

Solid-phase synthesis of Mannich-base hybridized cyclopeptides

823

Solid-phase synthesis of metal-complex containing peptides

824

Solid-phase synthesis of methyl carboxymycobactin T 7 and analogues as potential antimycobacterial agents

825

Solid-phase synthesis of modified oligopeptides via Passerini multicomponent reaction

826

Solid-Phase Synthesis of Multiantennary Oligonucleotide Glycoconjugates Utilizing On-Support Oximation

827

Solid-phase synthesis of multi-walled carbon nanotubes from butadiynyl-ferrocene-containing compounds Original Research Article

828

Solid-phase synthesis of muramyl dipeptide (mdp) derivatives using a multipin method

829

Solid-phase synthesis of N,N′-substituted acylguanidines

830

Solid-phase synthesis of N-9-substituted 2,8-diaminopurines

831

Solid-phase synthesis of naphthylamidines as factor VIIa/tissue factor inhibitors

832

Solid-phase synthesis of natural product-like macrocycles by a sequence of Ugi-4CR and SNAr-based cycloetherification

833

Solid-phase synthesis of neuroactive spider–wasp hybrid toxin analogues using a backbone amide linker

834

Solid-phase synthesis of new fused tetra, penta and hexacyclic β-carboline derivatives

835

Solid-phase synthesis of new peptide–arene hybrids from N-TCP amino acids

836

Solid-phase synthesis of new pyrrolobenzodiazepine–chalcone conjugates: DNA-binding affinity and anticancer activity

837

Solid-phase synthesis of new ribo and deoxyribo BrdU probes for labeling and detection of nucleic acids

838

Solid-Phase synthesis of new saphenamycin analogues with antimicrobial activity

839

Solid-phase synthesis of novel hybrid opiates

840

Solid-phase synthesis of novel inhibitors of Farnesyl Transferase

841

Solid-phase synthesis of N-substituted 3,4-dihydroquinazolinone derivatives

842

Solid-phase synthesis of N-substituted amidinophenoxy pyridines as factor Xa inhibitors

843

Solid-phase synthesis of Nα-benzyl-Nα-cinnamyl lysine and glutamic acid derivatives

844

Solid-phase synthesis of oligoesters using a JandaJel™ resin

845

Solid-phase synthesis of oligomeric deoxynucleic guanidine (DNG): A polycationic analogue of DNA

846

Solid-phase synthesis of oligomeric deoxynucleic-thiourea (DNT) and deoxynucleic S-methylthiourea (DNmt): a neutral/polycationic analogue of DNA

847

Solid-phase synthesis of oligomers carrying several chromophore units linked by phosphodiester backbones

848

Solid-phase synthesis of oligonucleotides containing a Bipyridine ligand at the 3′-3′ inversion of polarity site

849

Solid-phase synthesis of O-sulfated glycopeptide by the benzyl-protected glycan strategy

850

Solid-phase synthesis of oxazolones and other heterocycles via Wang resin-bound diazocarbonyls

851

Solid-phase synthesis of oxygen-bridged tetrahydropyridones

852

Solid-phase synthesis of palmitoylated and farnesylated lipopeptides employing the fluoride-labile PTMSEL linker

853

Solid-phase synthesis of partially-modified retro and retro-inverso ψ[NHCH(CF3)]-peptides

854

Solid-phase synthesis of partially-modified retro and retro-inverso ψ[NHCH(CF3)]-peptides

855

Solid-phase synthesis of partially-modified retro and retro-inverso ψ[NHCH(CF3)]-peptides

856

Solid-phase synthesis of peptide aldehydes directly on acetal resin

857

Solid-phase synthesis of peptide ribonucleic acids (PRNA)

858

Solid-phase synthesis of peptide thioacids through hydrothiolysis of resin-bound peptide thioesters

859

Solid-Phase Synthesis of Peptide-Derived Enantiospecific Nucleic Acid Analogs

860

Solid-phase synthesis of peptide–heterocycle hybrids containing a tripeptide-derived 6,6-fused bicyclic subunit

861

Solid-phase synthesis of peptides containing O-phosphoryl serine and O-phosphoryl threonine using allyl group for phosphate protection

862

Solid-phase synthesis of peptidomimetic oligomers with a phosphodiester backbone

863

Solid-phase synthesis of peptidosulfonamide containing peptides derived from Leu-enkephalin

864

Solid-phase synthesis of peptidyl α-keto heterocycles

865

Solid-phase synthesis of phenols and pyridinones via arylboronation/oxidation protocol using aryl bromides

866

Solid-phase synthesis of phosphine–oxazoline peptides

867

Solid-phase synthesis of photoaffinity probes: highly efficient incorporation of biotin-tag and cross-linking groups

868

Solid-phase synthesis of phthalocyanine and tetraazaporphyrin triangular prisms

869

Solid-phase synthesis of PhTX-3.2.4 and PhTX-2.3.3 derivatives

870

Solid-phase synthesis of polyamines using a Dde-linker: philanthotoxin-4.3.3 via an on-resin Mitsunobu reaction

871

Solid-phase synthesis of polyfunctional polylysine dendrons using aldehyde linkers

872

SOLID-PHASE SYNTHESIS OF POLYMER-BOUND β-KETOESTERS AND THEIR APPLICATION IN THE SYNTHESIS OF STRUCTURALLY DIVERSE PYRAZOLONES

873

Solid-phase synthesis of positively charged deoxynucleic guanidine (DNG) modified oligonucleotides containing neutral urea linkages: effect of charge deletions on binding and fidelity Original Research Article

874

Solid-phase synthesis of positively charged deoxynucleic guanidine (DNG) oligonucleotide incorporating 7-deazaguanine bases Original Research Article

875

Solid-Phase synthesis of positively charged deoxynucleic guanidine (DNG) oligonucleotide mixed sequences

876

Solid-phase synthesis of potential protein tyrosine phosphatase inhibitors via the Ugi four-component condensation

877

Solid-phase synthesis of pyrido[2,3-d]pyrimidin-7-ones

878

Solid-phase synthesis of pyrrolo[2,1-c][ and ]benzodiazepine-5,11-diones

879

Solid-phase synthesis of quinazolin-4(3H)-ones with three-point diversity

880

Solid-phase synthesis of quinol fatty alcohols, design of N/O-substituted quinol fatty alcohols and comparative activities on axonal growth

881

Solid-phase synthesis of quinoxaline derivatives using 6-amino-2,3-dichloroquinoxaline loaded on AMEBA resin

882

Solid-phase synthesis of quinoxaline, thiazine, and oxazine analogs through a benzyne intermediate

883

Solid-phase synthesis of quinoxalines on SynPhase™ Lanterns

884

Solid-phase synthesis of second-generation polyproline dendrimers

885

Solid-phase synthesis of serglycin glycopeptides on a new allyl ester linker

886

Solid-phase synthesis of serglycin glycopeptides on a new allyl ester linker

887

Solid-phase synthesis of serglycin glycopeptides on a new allyl ester linker

888

Solid-phase synthesis of skeletally diverse benzofused sultams via palladium-catalyzed cyclization

889

Solid-phase synthesis of Stat3 inhibitors incorporating O-carbamoylserine and O-carbamoylthreonine as glutamine mimics

890

Solid-phase synthesis of substituted 1,3,4-thiadiazoles

891

Solid-Phase Synthesis of Substituted 2,3-Diketopiperazines from Reduced Polyamides

892

Solid-phase synthesis of substituted 2-aminomethylbenzimidazoles

893

Solid-phase synthesis of substituted 3-amino-3′-carboxy-tetrahydrocarbazoles

894

Solid-phase synthesis of sulfamides

895

Solid-phase synthesis of symmetrical and unsymmetrical polyamine analogues of philanthotoxins using a Dde-linker

896

Solid-phase synthesis of terminal oligonucleotide–phosphoramidate conjugates

897

Solid-phase synthesis of tertiary methylamines via reductive alkylation–fragmentation using a hydroxylamine linker

898

Solid-phase synthesis of tertiary methylamines via reductive alkylation–fragmentation using a hydroxylamine linker

899

Solid-phase synthesis of tertiary methylamines via reductive alkylation–fragmentation using a hydroxylamine linker

900

Solid-phase synthesis of tertiary-amino linked benzamides: a versatile method for forming C–N bonds with electron-rich and electron-poor anilines

901

Solid-phase synthesis of tetrasubstituted 2-imino-1,3-thiazolines using a functionalizing cleavage strategy

902

Solid-phase synthesis of the B-chain of human α2HS glycoprotein

903

Solid-phase synthesis of the glycopeptide of human glycophorin AM bearing the consecutive sialyl-T antigen Original Research Article

904

Solid-phase synthesis of thrombin inhibitors

905

Solid-phase synthesis of traceless 1,3-diketones

906

Solid-phase synthesis of unsymmetrical ureas through the use of Kenner safety-catch linker

907

Solid-phase synthesis of α-alkylserines via phase-transfer catalytic alkylation of polymer-supported 2-phenyl-2-oxazoline-4-carboxylate

908

Solid-phase synthesis of α-hydroxy phosphonates and hydroxystatine amides. Transition-state isosteres derived from resin-bound amino acid aldehydes

909

Solid-phase synthesis of α-substituted 3-bisarylthio N-Hydroxy propionamides as Specific MMP Inhibitors Original Research Article

910

Solid-phase synthesis of α-substituted proline hydantoins and analogs

911

Solid-phase synthesis of α-sulfonylamino amide derivatives based on Ugi-type condensation reaction using sulfonamides as amine input

912

Solid-phase synthesis of γ-lactams, γ-lactones and cyclobutane derivatives from common resin-bound intermediates

913

Solid-phase synthesis on functionalised fluoropolymer resins. Part 1: Nafion resin sulfonamide-immobilised carboxylic acid derivatives and aryl vinyl sulfones

914

Solid-phase synthesis on functionalised fluoropolymer resins. Part 2: Preparation and properties of functional Merrifield-type resins possessing a perfluorinated polymer backbone

915

Solid-phase synthesis, mass spectrometric analysis of the zinc-folding, and phorbol ester-binding studies of the 116-mer peptide containing the tandem cysteine-rich C1 domains of protein kinase C gamma Original Research Article

916

Solid-phase synthesis: a linker for side-chain anchoring of arginine

917

Solid-phase synthetic method for (±)-α-amino acids via phase-transfer catalytic alkylation

918

Solid-phase temperature measurements in a HTPEM fuel cell

919

Solid-phase transformation of glass-like carbon nanoparticles into nanotubes and the related mechanism Original Research Article

920

Solid-Phase Transformations in Tetraamine and Hexaamine Mixed-Ligand Complexes of Chromium(III) with Cyclic Tetraamines

921

Solid-phase trapping of solutes for further chromatographic or electrophoretic analysis

922

Solid-phase treatment with the fungus Trametes versicolor substantially reduces pharmaceutical concentrations and toxicity from sewage sludge

923

Solid-phase ultraviolet absorbance spectrophotometric multisensor for the simultaneous determination of butylated hydroxytoluene and co-existing antioxidants

924

Solid-phase ultraviolet absorbance spectrophotometric multisensor for the simultaneous determination of butylated hydroxytoluene and co-existing antioxidants Original Research Article

925

Solid-phase versus solution synthesis of asymmetrically disubstituted furazano[3,4-b]pyrazines

926

Solid-phase Zincke route to pyridinium, tetrahydropyridine, and piperidine derivatives: vesamicol analogs

927

Solid-phase, single nucleotide primer extension of DNA/RNA hybrids by reverse transcriptases

928

Solid-phase/solution-phase combinatorial synthesis of neuroimmunophilin ligands

929

Solid-phase/supercritical-fluid extraction for liquid chromatography of phenolic compounds in freshwater microalgae and selected cyanobacterial species

930

Solid-phases and desorption processes of arsenic within Bangladesh sediments

931

Solid-precursor vaporizer for aerosol reactors: Synthesis of magnesium aluminate nanoparticles by thermal decomposition of magnesium aluminum tert-butoxide

932

Solid-Pseudopapillary Tumor of the Pancreas: Our Experience in Bangladesh

933

Solids accumulation in six full-scale subsurface flow constructed wetlands

934

Solids and nutrients removals from the liquid fraction of swine slurry through screening and flocculation treatment and influence of these processes on anaerobic biodegradability

935

Solids behaviour in a dilute gas-solid two-phase mixture flowing through monolith channels

936

Solids characterisation in an anaerobic migrating bed reactor (AMBR) sewage treatment system

937

Solids circulation and axial dispersion of cohesionless particles in a V-mixer

938

Solids concentration in the fully developed region of circulating fluidized bed downers

939

Solids concentration profiles and pressure drop in pipeline flow of multisized particulate slurries

940

Solids concentration simulation of different size particles in a cyclone separator

941

Solids containing spherical nano-inclusions with interface stresses: Effective properties and thermal–mechanical connections

942

Solids contents, properties and molecular structures of asphaltenes from different oilsands

943

Solids deposition in low-velocity slug flow pneumatic conveying

944

Solids distribution as a basis for modeling of heat transfer in circulating fluidized bed boilers

945

Solids entrainment into gas, liquid, and gas–liquid spray jets in fluidized beds

946

Solids falling in flash furnace burner concentrate chutes

947

Solids flow behavior in bends: assessing fine solids buildup

948

Solids flow mapping in a gas–solid riser: Mean holdup and velocity fields

949

Solids loading and grade on mineral froth bubble lamellae

950

Solids mixing behavior in a nano-agglomerate fluidized bed

951

Solids mixing in a circulating fluidized bed

952

Solids mixing in a down-flow circulating fluidized bed of 0.418-m in diameter

953

Solids mixing in a fluidized bed riser

954

Solids mixing in the bottom zone of a circulating fluidized bed

955

Solids modeled by ab-initio crystal field methods. Effects of intermolecular interactions on the vibrational spectrum of urea

956

Solids motion of calcium carbonate particles in a high shear mixer granulator: A comparison between dry and wet conditions

957

Solids removal in upflow anaerobic reactors, a review

958

Solids Residence Time Distribution in Gas-Flowing Solids-Fixed Bed Contactors

959

Solids suspension in a pilot-scale mechanical flotation cell: A critical impeller speed correlation

960

Solids transport in mixed-flow dryers

961

Solids, organic load and nutrient concentration reductions in swine waste slurry using a polyacrylamide (PAM)-aided solids flocculation treatment

962

Solid–solid interaction between ferric oxide and manganese carbonate as influenced by lithium oxide doping

963

Solid–solid interactions between ferric and cobalt oxides as influenced by Al2O3-doping

964

Solid–solid interactions between ZnO and Fe2O3 as influenced by Al2O3-doping

965

Solid–solid interactions in Co3O4–MoO3/MgO system

966

Solid–solid interactions in Fe2O3/MgO system doped with aluminium and zinc oxides

967

Solid–solid interactions in Li2O-doped cobalt/magnesium mixed oxides system and the electrical properties of the produced solids

968

Solid–solid interface reconstruction at equilibrated Ni–Al2O3 interfaces Original Research Article

969

Solid–solid synthesis of a hydrophobic vitamin B12 having a benzo-18-crown-6 moiety at the C10 position of the corrin ring

970

Solid–Solid Synthesis, Crystal Structure and Thermal Decomposition of Copper (II) Complex of 2-Picolinic Acid

971

Solid–solid transformation mechanism for nanocrystalline sodalite from pillared clay

972

Solid–solid transformation route to nanocrystalline sodalite from Al-PILC at room temperature Original Research Article

973

Solid–solid transformations via nanoscale intermediate interfacial phase: Multiple structures, scale and mechanics effects

974

Solid–solid transitions in slit nanopores

975

Solid–solute phase equilibria in aqueous solutions: XV [1]. Thermodynamic analysis of the solubility of nickel carbonates

976

Solid-solution catalysts for CO2 reforming of methane

977

Solid–solution equilibria of cadmium in soils

978

Solid-solution hardening and softening in Mg–Zn alloys

979

Solid-solution metal partitioning in the Humber rivers: application of WHAM and SCAMP

980

Solid-Solution Nanoparticles: Use of a Nonhydrolytic Sol-Gel Synthesis To Prepare HfO2 and HfxZr1-xO2 Nanocrystals

981

Solid–solution partitioning of plutonium in surface waters at the Atomic Weapons Establishment Aldermaston (UK)

982

Solid-solution phase formation rules for high entropy alloys: A thermodynamic perspective

983

Solid-solution red phosphors for white LEDs

984

Solid-spaced filters: an alternative for narrow-bandpass applications

985

Solid-stabilized emulsions

986

Solid-state 13C and 1H spin diffusion NMR analyses of the microfibril structure for bacterial cellulose

987

Solid-state 13C magic angle spinning NMR spectroscopy characterization of particle size structural variations in synthetic nanodiamonds

988

Solid-state 13C NMR analyses of the structures of crystallized and quenched poly(lactide)s: Effects of crystallinity, water absorption, hydrolytic degradation, and tacticity

989

Solid-state 13C NMR and molecular modeling studies of acetyl aleuritolic acid obtained from Croton cajucara Benth

990

Solid-state 13C NMR and SAXS characterization of the amorphous phase in low-molecular weight poly(ethylene oxide)s

991

Solid-state 13C NMR investigation of the structure and dynamics of highly drawn polyethylene—detection of the oriented non-crystalline component

992

Solid-state 13C NMR investigation of the structure and hydrogen bonding for stereoregular poly(vinyl alcohol) films in the hydrated state

993

Solid-state 13C NMR investigations of the glycosidic linkage in α-α′ trehalose

994

Solid-State 13C NMR Reveals Annealing of Raft-Like Membranes Containing Cholesterol by the Intrinsically Disordered Protein α-Synuclein

995

Solid-state 13C NMR spectroscopic studies of soil organic matter at two magnetic field strengths

996

Solid-state 13C NMR spectroscopy studies of xylans in the cell wall of Palmaria palmata (L. Kuntze, Rhodophyta) Original Research Article

997

Solid-state 13C NMR spectroscopy: characterization of soil organic matter under two contrasting residue management regimes in a 2-year-old pine plantation of subtropical Australia

998

Solid-state 13C NMR studies of the interaction of acetone, carbon tetrachloride and trichloroethylene with soil components

999

Solid-state 13C NMR study of banana liquid crystals – 1: Two different alkyl tail-group packing environments in the B7 phase

1000

Solid-state 13C NMR study of banana liquid crystals – 2: Alkyl tail-group packing environments in the hexagonal columnar phase

بازگشت