ليست عنوان مقالات لاتين Corrosion behavior of nitride layer obtained on AISI 316L stainless steel via simple direct nitridation route at low temperature Corrosivity of long-term fire retardant Fire Trol® 931 and Fire Foam® 103 on aluminium alloys and steel

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Corrosion behavior of nitride layer obtained on AISI 316L stainless steel via simple direct nitridation route at low temperature

2

Corrosion behavior of novel 3%Cr pipeline steel in CO2 Top-of-Line Corrosion environment

3

Corrosion behavior of novel imitation-gold copper alloy with rare earth in 3.5% NaCl solution

4

Corrosion behavior of oil tube steel in simulant solution with hydrogen sulfide and carbon dioxide

5

Corrosion behavior of oxide-covered Cu47Ti34Zr11Ni8 (Vitreloy 101) in chloride-containing solutions

6

Corrosion behavior of palladium–silver–copper alloys in model saliva

7

Corrosion behavior of Pb–Sn and Pb–2 mass% Sn–Sr alloys during repetitive current application

8

Corrosion Behavior of PEO Coatings on 6061 Al Alloy: Effect of Sodium Fluoride Addition to Aluminate based Electrolyte

9

Corrosion behavior of phosphorus ion-implanted Ni50.6Ti49.4 shape memory alloy

10

Corrosion behavior of plasma sprayed ceramic and metallic coatings on carbon steel in simulated seawater

11

Corrosion behavior of plasma sprayed hydroxyapatite and hydroxyapatite-silicon oxide coatings on AISI 304 for biomedical application

12

Corrosion behavior of plasma-sprayed Al2O3–Cr2O3 coatings in hot lithium molten salt

13

Corrosion behavior of polyphenylene sulfide–carbon black–graphite composites for bipolar plates of polymer electrolyte membrane fuel cells

14

Corrosion behavior of polypyrrole coated mild steel

15

Corrosion Behavior of Polypyrrole/Mesoporous Silica Nanocontainers Coatings on the Mild Steel

16

Corrosion behavior of porous chromium carbide in supercritical water

17

Corrosion behavior of PVD-grown WC–(Ti1−xAlx)N films in a 3.5% NaCl solution

18

Corrosion behavior of rare earth cerium based conversion coating on aluminum alloy

19

Corrosion behavior of rare earth metal (REM) conversion coatings on aluminum alloy LY12

20

Corrosion behavior of rare earth metal (REM) conversion coatings on aluminum alloy LY12

21

Corrosion behavior of reinforcement bars embedded in mortar specimens containing ladle furnace slag in partial substitution of aggregate and cement

22

Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume

23

Corrosion behavior of reinforcing steel in concrete for nuclear facilities exposed in high chloride and low pH environment

24

Corrosion Behavior of Rusted 550 MPa Grade Offshore Platform Steel Original Research Article

25

Corrosion behavior of shape memory, superelastic, and nonsuperelastic nickel–titanium-based orthodontic wires at various temperatures

26

Corrosion behavior of silicon nitride bonding silicon carbide in molten magnesium and AZ91 magnesium alloy

27

Corrosion Behavior of Single and Multilayer Coatings Deposited on Ni-Cr Dental Alloy by CAE-PVD Technique in Artificial Saliva

28

Corrosion behavior of some austenitic stainless steels in chloride environments

29

Corrosion behavior of sputtered Cr–Si–Ni and Cr–Si–Ni–Al resistive films in 0.1 M NaOH

30

Corrosion behavior of sputtered Cr–Si–Ni resistive films in acidic and alkaline environments

31

Corrosion behavior of squeeze-cast silicon carbide-2024 composites in aerated 3.5 wt.% sodium chloride

32

Corrosion behavior of squeeze-cast silicon carbide-2024 composites in aerated 3.5 wt.% sodium chloride

33

Corrosion behavior of SS316L in simulated and accelerated PEMFC environments

34

Corrosion behavior of steel in simulated concrete pore solutions treated with calcium silicate hydrates

35

Corrosion behavior of steels in flowing lead–bismuth

36

Corrosion behavior of steels in flowing lead–bismuth under abnormal conditions

37

Corrosion behavior of steels in Gulf seawater environment

38

Corrosion behavior of steels in liquid lead–bismuth with low oxygen concentrations

39

Corrosion behavior of superhydrophobic surfaces of Ti alloys in NaCl solutions

40

Corrosion behavior of supermartensitic stainless steel in aerated and CO2-saturated synthetic seawater

41

Corrosion behavior of the laser-brazed joint of TiNi shape memory alloy and stainless steel in artificial saliva

42

Corrosion behavior of the Mg65Cu25Gd10 bulk amorphous alloys

43

Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment

44

Corrosion behavior of three bipolar plate materials in simulated SPE water electrolysis environment

45

Corrosion Behavior of Ti/TiN Multilayer Nanostructured Coatings Applied on AISI 316L by Arc-PVD Method in the Simulated Body Fluid

46

Corrosion behavior of Ti2N thin films in various corrosive environments N. S.

47

Corrosion behavior of Ti3AlC2 in NaOH and H2SO4

48

Corrosion behavior of Ti–5Ag alloy with and without thermal oxidation in artificial saliva solution

49

Corrosion behavior of Ti–6Al–4V alloy treated by plasma immersion ion implantation process

50

Corrosion behavior of Ti-6Al-4V alloy welded by scanning electron beam

51

Corrosion behavior of Ti-6Al-4V alloy welded by scanning electron beam

52

Corrosion behavior of Ti–8Al–1Mo–1V alloy compared to Ti–6Al–4V

53

Corrosion behavior of Ti–Al–N/Ti–Al duplex coating on AZ31 magnesium alloy in NaCl aqueous solution

54

Corrosion behavior of TiN and TiCN coatings synthesized by PVD on the spark plasma sintered NiTi substrate

55

Corrosion behavior of TiN films prepared by vacuum arc deposition and nitrogen ion beam dynamic mixing implantation

56

Corrosion behavior of tin ions implanted zirconium in 1N H2SO4

57

Corrosion Behavior of TiN/CrN Nanoscale Multi-layered Coating in Ringer's Solution

58

Corrosion behavior of TiN-coated stainless steel as bipolar plate for proton exchange membrane fuel cell

59

Corrosion behavior of TiO2 films on Mg–Zn alloy in simulated body fluid

60

Corrosion behavior of titanium alloy Beta-21S coated with diamond like carbon in Hankʹs solution

61

Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringerʹs solution for bioimplant applications

62

Corrosion behavior of titanium in the presence of calcium phosphate and serum proteins

63

Corrosion behavior of titanium metal in the presence of inhibited sulfuric acid at 50°C

64

Corrosion behavior of titanium nitride coated Ni–Ti shape memory surgical alloy

65

Corrosion behavior of uniaxially cold-pressed Fe2Mo intermetallic in 0.5M H2SO4

66

Corrosion behavior of uniaxially cold-pressed Fe2Mo intermetallic in 0.5M H2SO4

67

Corrosion behavior of vacuum sintered duplex stainless steels

68

Corrosion behavior of weathering steel in marine atmosphere

69

Corrosion behavior of X-70 pipe steel in near-neutral pH solution

70

Corrosion Behavior of Zn-Co Alloy Coating from Acid Sulphate Bath

71

Corrosion behavior of ZnO nanosheets on brass substrate in NaCl solutions

72

Corrosion behavior of Zr alloys with a high Nb content

73

Corrosion behavior of Zr41.2Ti13.8Ni10Cu12.5Be22.5 bulk metallic glass in various aqueous solutions

74

Corrosion behavior of Zr-based metallic glass coating on type 304L stainless steel by pulsed laser deposition method

75

Corrosion behavior of ZrN/Zr coated biomedical AZ91 magnesium alloy

76

Corrosion behavior of ZrO2–SiO2–Al2O3 refractories in lead silicate glass melts

77

Corrosion behavior of β titanium alloys for biomedical applications

78

Corrosion behavior on orthopedic NiTi alloy with nanocrystalline/amorphous surface

79

Corrosion behaviors and contact resistances of the low-carbon steel bipolar plate with a chromized coating containing carbides and nitrides

80

Corrosion behaviors and galvanic studies of microarc oxidation films on Al–Zn–Mg–Cu alloy

81

Corrosion behaviors in physiological solution of cerium conversion coatings on AZ31 magnesium alloy

82

Corrosion behaviors of AISI 1025 steels with electroless nickel/aluminized coatings in NaCl-induced hot corrosion

83

Corrosion Behaviors of Ai-Si-Cu-Based Filler Metals and 6061-T6 Brazements

84

Corrosion behaviors of austenitic Fe–30Mn–7Al–xCr–1C alloys in 3.5% NaCl solution

85

Corrosion behaviors of bulk metallic glasses Fe66.7C7.0Si3.3B5.5P8.7Cr2.3Al2.0Mo4.5 having different crystal volume fractions

86

Corrosion behaviors of Cr(N,O)/CrN double-layered coatings by cathodic arc deposition

87

Corrosion behaviors of Cr(N,O)/CrN multi-layered coatings by cathodic arc deposition

88

Corrosion behaviors of low carbon steel, SUS310 and Fe–Mn–Al alloy with hot-dipped aluminum coatings in NaCl-induced hot corrosion

89

Corrosion behaviors of nanocrystalline and conventional polycrystalline copper

90

Corrosion Behaviors of Random and Special Grain Boundaries in a Sensitized 304 Stainless Steel Original Research Article

91

Corrosion behaviors of sputter-deposited steel thin film for electrical resistance sensor material

92

Corrosion behaviors of US steels in flowing lead–bismuth eutectic (LBE)

93

Corrosion behaviour and galvanic coupling with steel of Al-based coating alternatives to electroplated cadmium

94

Corrosion behaviour assessment of lead-free Sn–Ag–M (M = In, Bi, Cu) solder alloys

95

Corrosion behaviour in concrete of three differently galvanized steel bars

96

CORROSION BEHAVIOUR OF 2124 ALUMINIUM ALLOY-SILICON CARBIDE METAL MATRIX COMPOSITES IN SODIUM CHLORIDE ENVIRONMENT

97

Corrosion behaviour of 304 stainless steel in sulphuric acid solutions and its inhibition by some substituted pyrazolones

98

Corrosion behaviour of a dental alloy in some beverages and drinks

99

Corrosion behaviour of a Low Ni austenitic stainless steel in carbonated chloride-polluted alkali-activated fly ash mortar

100

Corrosion behaviour of a new low-nickel stainless steel embedded in activated fly ash mortars

101

Corrosion behaviour of a new low-nickel stainless steel in saturated calcium hydroxide solution

102

Corrosion behaviour of a superelastic Ni–Ti alloy

103

Corrosion behaviour of a superelastic Ni–Ti alloy

104

Corrosion behaviour of a surface-treated AISI H11 hot work tool steel in molten aluminium alloy

105

Corrosion behaviour of AISI 304 stainless steel with Cu coatings in H2SO4

106

Corrosion behaviour of Al based tritium permeation barriers in flowing Pb–17Li

107

Corrosion behaviour of Al–Cu–Fe alloys containing a quasicrystalline phase

108

Corrosion behaviour of AlN for self-cooled Li/V blanket application

109

Corrosion Behaviour of Aluminium Alloy in Palm Oil Methyl Ester (B100)

110

Corrosion behaviour of aluminium in ethyleneglycol–water electrolytes containing phosphonic acid

111

Corrosion behaviour of aluminized martensitic and austenitic steels in liquid Pb–Bi

112

Corrosion behaviour of amorphous Ni–Cr–Nb–P–B bulk alloys in 6M HCl solution

113

Corrosion behaviour of amorphous Ni–Cr–Nb–P–B bulk alloys in 6M HCl solution

114

Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids

115

Corrosion behaviour of blended cements in low and medium strength concretes

116

Corrosion behaviour of carbon materials exposed to molten lithium chloride–potassium chloride salt

117

Corrosion behaviour of carbon S-phase created on Ni-free biomedical stainless steel

118

Corrosion behaviour of chromated Zn and Zn alloy electrodeposits

119

Corrosion behaviour of chromium-free ceramics for liquid slag removal in Pressurized Pulverized Coal Combustion

120

CORROSION BEHAVIOUR OF CLADDING MATERIALS OF RESEARCH REACTOR SPENT FUEL DURING WET STORAGE

121

Corrosion behaviour of cobalt–chromium dental alloys doped with precious metals

122

Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications

123

Corrosion behaviour of construction materials for high temperature steam electrolysers

124

Corrosion behaviour of Duplex stainless steels in organic acid aqueous solutions

125

Corrosion behaviour of electrodeposited and sputtered Cr coatings and sputtered Ta coatings with α and β phases

126

Corrosion behaviour of electrodeposited nanocrystalline Ni–W and Ni–Fe–W alloys

127

Corrosion behaviour of EUROFER in Pb–17Li at 500 °C

128

Corrosion behaviour of Fe–Al(–Ti) alloys in steam

129

Corrosion behaviour of Fe–Mn–Si based shape memory steels trained by cold rolling

130

Corrosion behaviour of Fe–Mn–Si based shape memory steels trained by cold rolling

131

Corrosion behaviour of galvanized steel and electroplating steel in aqueous solution: AC impedance study and XPS

132

Corrosion behaviour of galvannealed steel sheet

133

Corrosion behaviour of innovative stainless steels in mortar

134

Corrosion behaviour of laser gas-nitrided Ti–6Al–4V alloy in nitric acid solution

135

Corrosion behaviour of laser-melted magnesium alloys

136

Corrosion behaviour of low activation steels in flowing Pb–17Li

137

Corrosion behaviour of low-nickel austenitic stainless steels reinforcements: A comparative study in simulated pore solutions

138

Corrosion behaviour of magnesium alloys coated with TiN by cathodic arc deposition in NaCl and Na2SO4 solutions

139

Corrosion behaviour of martensitic and austenitic steels in flowing lead–bismuth eutectic

140

Corrosion behaviour of medical CoCr alloy after nitrogen plasma immersion ion implantation

141

Corrosion behaviour of Mg/Al alloys with composite coatings

142

Corrosion behaviour of Mg-rich Al coatings in the protection of Al alloys

143

Corrosion behaviour of MoSx-based coatings deposited onto high speed steel by magnetron sputtering

144

Corrosion behaviour of nano structured sol-gel alumina coated 9Cr–1Mo ferritic steel in chloride bearing environments

145

Corrosion behaviour of Nd–Fe–B permanent magnetic alloys

146

Corrosion behaviour of Nd–Fe–B permanent magnetic alloys

147

Corrosion behaviour of new stainless steels reinforcing bars embedded in concrete

148

Corrosion Behaviour of Nickel Coated AISI 316 Stainless Steel as a Function of Annealing Temperature

149

Corrosion behaviour of NiCrBSi plasma-sprayed coatings partially melted with laser

150

Corrosion behaviour of Nitinol alloy coated with alkylsilanes and polypyrrole

151

Corrosion behaviour of plasma sprayed coatings

152

Corrosion behaviour of polyrhodanine coated copper electrode in 0.1 M H2SO4 solution

153

Corrosion behaviour of porous Ni-free Ti-based bulk metallic glass produced by spark plasma sintering in Hanksʹ solution

154

Corrosion behaviour of R2O–CaO–SiO2 glasses submitted to accelerated weathering

155

Corrosion behaviour of rare earth ion-implanted hot-dip galvanised steel

156

Corrosion behaviour of rebars in fly ash mortar exposed to carbon dioxide and chlorides

157

Corrosion behaviour of reinforced concrete: Laboratory experiments and archaeological analogues for long-term predictive modelling

158

Corrosion behaviour of reinforcing steel exposed to an amino alcohol based corrosion inhibitor

159

Corrosion behaviour of sensitized AISI-type 316L stainless steel in molten carbonate fuel cell in cathode-gas environment

160

Corrosion behaviour of silica hybrid coatings produced from basic catalysed particulate sols by dipping and EPD

161

Corrosion behaviour of single (Ti) and duplex (Ti–TiO2) coating on 304L stainless steel in nitric acid medium

162

Corrosion behaviour of sintered NdFeB coated with Al/Al2O3 multilayers by magnetron sputtering

163

Corrosion behaviour of sintered Nd–Fe–B magnets

164

Corrosion behaviour of Sn-containing oxide layer on AZ91D alloy formed by plasma electrolytic oxidation

165

Corrosion behaviour of sol–gel coatings doped with cerium salts on 2024-T3 aluminum alloy

166

Corrosion behaviour of stainless steels in flowing LBE at low and high oxygen concentration

167

Corrosion behaviour of steel in concentrated phosphoric acid solutions

168

Corrosion behaviour of steel rebars in reinforced concrete containing thermoplastic wastes as aggregates

169

Corrosion behaviour of steel ropes for snow and rockfall barriers

170

Corrosion behaviour of steels after laser surface melting

171

Corrosion behaviour of steels and refractory metals and tensile features of steels exposed to flowing PbBi in the LECOR loop

172

Corrosion behaviour of steels and refractory metals in flowing Lead-Bismuth Eutectic at low oxygen activity

173

Corrosion behaviour of steels in lead–bismuth at 823 K

174

Corrosion Behaviour of Steels in Nigerian Food Processing Environments

175

Corrosion behaviour of superferritic stainless steels cathodically modified with minor additions of ruthenium in sulphuric and hydrochloric acids

176

Corrosion behaviour of the Mg65Y10Cu15Ag10 bulk metallic glass

177

Corrosion behaviour of the Mg65Y10Cu15Ag10 bulk metallic glass

178

Corrosion behaviour of the protective and decorative TiN coatings on large area steel strips

179

Corrosion behaviour of Ti–15Mo alloy for dental implant applications

180

Corrosion behaviour of Ti40Cu60 alloy in H3PO4 solutions

181

Corrosion behaviour of Ti–Nb–Sn shape memory alloys in different simulated body solutions

182

Corrosion behaviour of titanium in non-aqueous solvents

183

Corrosion behaviour of titanium in the presence of Streptococcus mutans

184

Corrosion behaviour of titanium in the presence of Streptococcus mutans

185

Corrosion behaviour of various model alloys with NaCl–KCl coating

186

Corrosion behaviour of weathering steel in diluted Qinghai salt lake water in a laboratory accelerated test that involved cyclic wet/dry conditions

187

Corrosion behaviour of zinc in sodium perchlorate solutions

188

Corrosion behaviour of zinc–nickel coatings, electrodeposited on steel

189

Corrosion behaviour of zirconia barrier coatings on galvanized steel

190

Corrosion behaviour of Zr1−xTixV0.6Ni1.2M0.2 (M=Ni, Cr, Mn) AB2-type metal hydride alloys in alkaline solution

191

Corrosion behaviour, microhardness and surface characterisation of low energy, high current ion implanted austenitic stainless steel

192

Corrosion behaviour, microhardness and surface characterisation of low energy, high current ion implanted austenitic stainless steel

193

Corrosion Behaviours of Copper Alloy in Solutions Containing Na SO4 AND NaCI with Different Concentrations

194

Corrosion behaviours of two nickel-based coatings in H2S-containing environments

195

Corrosion by bacteria of concrete in sewerage systems and inhibitory effects of formates on their growth

196

Corrosion by chlorides in reinforced concrete: Determination of chloride concentration threshold by impedance spectroscopy

197

Corrosion by galvanic coupling between amalgam and different chromium-based alloys

198

Corrosion by galvanic coupling between carbon fiber posts and different alloys

199

Corrosion characteristic of Ce Al brass in comparison with As Al brass

200

Corrosion characteristics of Alloy AZ63 in buffered neutral solutions

201

Corrosion characteristics of aluminum alloy in bio-ethanol blended gasoline fuel: Part 1. The corrosion properties of aluminum alloy in high temperature fuels

202

Corrosion characteristics of aluminum alloy in bio-ethanol blended gasoline fuel: Part 2. The effects of dissolved oxygen in the fuel

203

Corrosion characteristics of copper and leaded bronze in palm biodiesel

204

Corrosion characteristics of DMR-1700 steel and comparison with different steels in marine environment

205

Corrosion characteristics of DMR-1700 steel and comparison with different steels in marine environment

206

Corrosion characteristics of duplex surface-treated spheroidal graphite cast iron

207

Corrosion characteristics of electrochemically prepared phosphate doped polyaniline films in acidic chloride environments

208

Corrosion characteristics of Fe2O3Cr2O3 artificial passivation films under potentiostatic control

209

Corrosion characteristics of Fe2O3Cr2O3 artificial passivation films under potentiostatic control

210

Corrosion characteristics of hybrid Al/SiCp/MgAl2O4 composites fabricated with fly ash and recycled aluminum

211

Corrosion characteristics of low activation ferritic steel, JLF-1, in liquid lithium in static and thermal convection conditions

212

Corrosion characteristics of materials in Pb–Bi under transient temperature conditions

213

Corrosion characteristics of plain carbon steel coated with TiN and ZrN under high-flux ion bombardment

214

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

215

Corrosion characteristics of SS316L as bipolar plate material in PEMFC cathode environments with different acidities

216

Corrosion Characteristics of Zn-TiO2 Nanocomposite Coatings Fabricated by Electro-Codeposition Process

217

Corrosion characterization of durable silver coatings by electrochemical impedance spectroscopy and accelerated environmental testing

218

Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass: An experimental case study

219

Corrosion comparison of galvanized steel and aluminum in aqueous environments

220

Corrosion control by using indirect methods Original Research Article

221

Corrosion control enhancement from a dolomite-amended slow sand filter

222

Corrosion control in electric power systems

223

Corrosion control methods in supercritical water oxidation and gasification processes

224

Corrosion Control of Aluminium Alloy in Alkaline Solution Using Leave Extract of Plumbago Europaea

225

Corrosion control of steel components exposed to thermal cycling using radioactive tracers

226

Corrosion cracking prediction updating of deteriorating RC structures using inspection information

227

Corrosion cracking prediction updating of deteriorating RC structures using inspection information

228

Corrosion current distribution of macrocell and microcell of steel bar in concrete exposed to chloride environments

229

Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment

230

Corrosion defect assessment on pipes using limit analysis and notch fracture mechanics

231

Corrosion detection and control

232

Corrosion detection in aircraft by X-ray backscatter methods

233

Corrosion detection of reinforced concrete beams with wavelet analysis

234

Corrosion Detection of Steel Cables using Time Domain Reflectometry

235

Corrosion due to differential aeration reconsidered

236

Corrosion effect on the electrochemical properties of LaNi3.55Mn0.4Al0.3Co0.75 and LaNi3.55Mn0.4Al0.3Fe0.75 negative electrodes used in Ni–MH batteries

237

Corrosion effects between molten salts and thermal storage material for concentrated solar power plants

238

Corrosion effects of RME in blends with ULSD on aluminium and copper

239

Corrosion effects of runway de-icing chemicals on aircraft alloys and coatings

240

Corrosion Effects on the I-V Characteristics of Electrically Conducting Cables

241

Corrosion evaluation of one dry desulfurization equipment – Circulating fluidized bed boiler

242

Corrosion evaluation of Ti–48Al–2Cr–2Nb (at.%) in Ringer’s solution

243

Corrosion evaluation of traditional and new bronzes for artistic castings

244

Corrosion evaluation of wear tested nitinol wire

245

Corrosion experiment in the first liquid metal LiPb loop of China

246

Corrosion experiments and materials developed for the Japanese HLM systems

247

Corrosion experiments in flowing LBE at 450 °C

248

Corrosion experiments of steels in flowing Pb at 500 °C and in flowing LBE at 450 °C

249

Corrosion failure analysis of galvanized steel pipes in a water irrigation system

250

Corrosion failure analysis of high strength grade super 13Cr-110 tubing string

251

Corrosion failure analysis of L485 natural gas pipeline in CO2 environment

252

Corrosion failure analysis of pure nickel thermocouple sheath used in BaTiO3 hydrothermal synthesis reactor

253

Corrosion failure analysis of spent caustic drainage line pipe

254

Corrosion failure analysis of stainless steel components for maleic anhydride plant

255

Corrosion failure analysis of the condensate collector vessel head of evaporation system in ethylene glycol device

256

Corrosion failure due to flux residues in an electronic add-on device

257

Corrosion failure investigation of seamless stainless steel tube used in die-casting machine of Mg alloy

258

Corrosion failure of Zn–Al detonator housing

259

Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine

260

Corrosion failures of AISI type 304 stainless steel in a fertiliser plant

261

Corrosion failures of high temperature heat pipes

262

Corrosion fatigue and multiple site damage reliability analysis

263

Corrosion fatigue behavior of a biocompatible ultrafine-grained niobium alloy in simulated body fluid

264

Corrosion fatigue behavior of conversion coated and painted AZ61 magnesium alloy

265

Corrosion fatigue behavior of conversion coated AZ61 magnesium alloy

266

Corrosion fatigue behavior of die-cast and shot-blasted AM60 magnesium alloy

267

Corrosion fatigue behavior of extruded magnesium alloy AZ31 in sodium chloride solution

268

Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments

269

Corrosion fatigue behavior of extruded magnesium alloy AZ80-T5 in a 5% NaCl environment

270

Corrosion fatigue behavior of low alloy steels under simulated BWR coolant conditions

271

Corrosion fatigue behavior of magnesium alloys under oil environments

272

Corrosion fatigue behaviors of HSB800 and its HAZs in air and seawater environments

273

Corrosion fatigue behaviors of steel wires used in coalmine

274

Corrosion fatigue behaviors of two biomedical Mg alloys – AZ91D and WE43 – In simulated body fluid

275

Corrosion fatigue behaviour and fracture mechanisms in nitrided low alloy steel

276

Corrosion fatigue behaviour of a 15Cr-6Ni precipitation-hardening stainless steel in different tempers

277

Corrosion fatigue behaviour of aluminium alloy 6061-T651 welded using fully automatic gas metal arc welding and ER5183 filler alloy

278

Corrosion fatigue behaviour of high V–Cr–Ni cast irons in 3%NaCl aqueous solution

279

Corrosion fatigue behaviour of ion nitrided AISI 4140 steel

280

Corrosion fatigue behaviour of ion nitrided AISI 4140 steel

281

Corrosion fatigue crack growth behavior of 7075-T6 under biaxial tension–tension cyclic loading condition

282

Corrosion fatigue crack growth behavior of nickel base alloys in sodium thiosulfate solution

283

Corrosion fatigue crack growth behavior of nickel base alloys in sodium thiosulfate solution

284

Corrosion fatigue crack growth of AISI 4340 steel

285

Corrosion fatigue crack initiation in 12% chromium stainless steel

286

Corrosion fatigue crack initiation in 12% chromium stainless steel

287

Corrosion fatigue crack initiation of Al–Zn–Mg–Mn alloy in 0.5 M Na2SO4 solution

288

Corrosion fatigue crack initiation of Al–Zn–Mg–Mn alloy in 0.5 M Na2SO4 solution

289

Corrosion fatigue crack propagation in a heat affected zone of high-performance steel in an underwater sea environment

290

Corrosion fatigue crack propagation of a duplex stainless steel X6

291

Corrosion fatigue cracking of AISI 316L stainless steel screen mesh

292

Corrosion fatigue cracking of tube coils in an actifier column catalytic cracker

293

Corrosion fatigue effects on life estimation of deteriorated bridges under vehicle impacts

294

CORROSION FATIGUE FRACTURE BEHAVIOUR OF A SiC WHISKER–ALUMINIUM MATRIX COMPOSITE UNDER COMBINED TENSION–TORSION LOADING

295

Corrosion fatigue life prediction of a steel shaft material in seawater

296

Corrosion Fatigue Life Prediction of Aircraft Structure Based on Fuzzy Reliability Approach

297

CORROSION FATIGUE MODELING VIA DIFFERENTIAL INFRARED THERMOGRAPHY

298

Corrosion fatigue of a 12%Cr low pressure turbine blade steel in simulated service environments

299

Corrosion fatigue of bio-ceramic sapphire in isotonic sodium chloride solution

300

Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation

301

Corrosion fatigue of cemented carbide cutting tool materials

302

Corrosion fatigue of cemented carbide cutting tool materials

303

Corrosion fatigue of extruded magnesium alloys

304

Corrosion fatigue of extruded magnesium alloys

305

Corrosion fatigue phenomena learned from failure analysis

306

Corrosion film breakdown of galvanized steel in sulphate–chloride solutions

307

Corrosion in a buried pressurised water pipeline

308

Corrosion in high-temperature and supercritical water and aqueous solutions: a review

309

Corrosion in HVDC valve cooling systems

310

Corrosion in Polyethylene Coatings Case Study: Cooling Water Pipelines

311

Corrosion in supercritical CO2 by diffusion of flue gas acids and water

312

Corrosion in waste-fired boilers: A thermodynamic study

313

Corrosion in water supply pipe stainless steel 304 and a supply line of helium in stainless steel 316

314

Corrosion induced degradation of textured YBCO under operation in high humidity conditions

315

Corrosion induced failure of an air cylinder

316

Corrosion influence on bond in reinforced concrete

317

Corrosion influenced by biofilms during wet nuclear waste storage

318

Corrosion inhibiting action of tetramethyl-dithia-octaaza-cyclotetradeca-hexaene (MTAH) on corrosion of mild steel in hot 20% sulfuric acid

319

Corrosion Inhibition Activity of Cefixime on Mild Steel Surface in Aqueous Sulphuric Acid

320

Corrosion Inhibition and Adsorption Behavior of 1-(1-Naphthalenylmethyl)quinolinium Chloride on Mild Steel in Hydrochloric Acid Medium

321

Corrosion Inhibition and Adsorption Behavior of 5-(phenylthio)-3H-pyrrole-4-carbonitriles on Mild Steel Surface in 1M H2SO4: Experimental and Computational Approach

322

Corrosion inhibition and adsorption behavior of methionine on copper in HCl and synergistic effect of zinc ions

323

Corrosion inhibition and adsorption behavior of new Schiff base surfactant on steel in acidic environment: Experimental and theoretical studies

324

Corrosion inhibition and adsorption behavior of phytic acid on Pb and Pb–In alloy surfaces in acidic chloride solution

325

Corrosion inhibition and adsorption behaviour for aluminuim by extract of Aningeria robusta in HCl solution: Synergistic effect of iodide ions

326

Corrosion inhibition and Biocidal effect of some cationic surfactants based on Schiff base

327

Corrosion Inhibition and Dezincification of Brass in % 3 NaCl Solution by 3-Phenyl-1.2.4- Triazol-5-Thione

328

CORROSION INHIBITION BEHAVIOR OF N,N′-BIS(2,4,6- TRIHYDROXYACETOPHENONE)-PROPANDIIMINE ON ST44.0 STEEL IN ALKALINE NACL SOLUTION

329

Corrosion inhibition behavior of propyl phosphonic acid–Zn2+ system for carbon steel in aqueous solution

330

Corrosion Inhibition Behaviour of Enantia chlorantha Extract on Pipeline Steel Corrosion in Acidic System

331

Corrosion inhibition by aniline oligomers through charge transfer: a DFT approach

332

Corrosion inhibition by fatty acid oxadiazoles for oil well steel (N-80) and mild steel

333

CORROSION INHIBITION BY HEDP-Zn(2+) SYSTEM FOR MILD STEEL IN LOW CHLORIDE MEDIA

334

Corrosion inhibition by phosphonic acid -Zn^2+ systems for mild steel in chloride medium

335

Corrosion Inhibition by Piliostigma Thoningii Extract on Mild Steel in Acidic Environment: RSM and Molecular Modeling Approach

336

Corrosion inhibition effect and adsorption behaviour of nicotinamide derivatives on mild steel in hydrochloric acid solution

337

Corrosion Inhibition Effect of Ester Containing Cationic Gemini Surfactants on Low Carbon Steel

338

Corrosion Inhibition Effect of Substituted Quinoline and Its Condensation Products on Mild Steel in Acidic Media

339

Corrosion inhibition effect of tetramines for mild steel in 1M HCl

340

Corrosion inhibition effectiveness of zeolite ZSM-5 coating on mild steel against various organic acids and its antimicrobial activity

341

Corrosion Inhibition Effects of Some New Synthesized N-Aroyl-N-Aryl thiourea Derivatives for Carbon Steel in Sulfuric Acid Media

342

Corrosion inhibition efficiency of nonionic Schiff base amphiphiles of p-aminobenzoic acid for aluminum in 4N HCL

343

Corrosion Inhibition Mechanism of Rare Earth Metal on LC4 Al Alloy with Split Cell Technique

344

Corrosion Inhibition of 302 Stainless Steel with Schiff Base Compounds

345

Corrosion Inhibition of 5-Methyl-2H-imidazol-4-carboxaldehyde and 1H-Indole-3- carboxyaldehyde on Mild Steel in 1.0 M HCl: Gravimetric Method and DFT Study

346

Corrosion inhibition of 6061 Al–15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone

347

Corrosion Inhibition of A 106 Gr B Carbon Steel by Thapsia Garganica Extracts in 1 M Hydrochloric Acid

348

Corrosion Inhibition of AISI 304 Stainless Steel using Zinc Nitride Coating

349

Corrosion inhibition of Al–B4C metal matrix composites in a NaCl solution by benzotriazole

350

Corrosion inhibition of Al-Mg alloy in hydrochloric acid using Benzylamine- N-(p-methoxy benzylidene)

351

Corrosion Inhibition of Al-Si-Cu Alloy in the Basic Media by Using Six Inhibitors at Four Temperatures

352

Corrosion inhibition of aluminium alloys by tolyltriazole in chloride solutions

353

Corrosion inhibition of aluminium by rare earth chlorides

354

Corrosion Inhibition of Aluminium in Acidic Medium using Amino Acid (Methionine)

355

Corrosion inhibition of aluminium–brass in 3.5% NaCl solution and sea water

356

Corrosion inhibition of aluminum alloy in chloride mediums by undoped and doped forms of polyaniline

357

Corrosion inhibition of aluminum by 1,1(lauryl amido)propyl ammonium chloride in HCl solution

358

Corrosion Inhibition of Aluminum in Hydrochloric Acid Medium by Essential Oil of Eucalyptus camaldulensis and Myrtus Communis

359

Corrosion inhibition of aluminum in hydrochloric acid solution by alkylimidazolium ionic liquids

360

Corrosion Inhibition of API 5L Carbon Steel by Nettle Leaves Hydroalcoholic Extract in a 0.5 M H2SO4 Solution

361

Corrosion Inhibition of Brass in 3% NaCl Solution by Electrosynthesized Poly 4- amino-3-méthyl-1,2,4-triazole-5-thione

362

Corrosion inhibition of carbon steel and antibacterial properties of aminotris-(methylenephosphonic) acid

363

Corrosion inhibition of carbon steel in 1 M H2SO4 solution by Thapsia villosa extracts

364

Corrosion Inhibition of Carbon Steel in 1 M HCl using Monopolar Surfactants Derived From 3-Methyl-1,2,4- Triazole-5-Thione

365

Corrosion Inhibition of Carbon Steel in SULFIRAN® Process

366

Corrosion inhibition of carbon-steels by propargyltriphenylphosphonium bromide in H2SO4 solution

367

Corrosion Inhibition of Copper and Its Alloys Using Benzotriazole

368

Corrosion Inhibition of Copper by Ephedra Sarcocarpa Plant Extract as Green Corrosion Inhibitor in Strong Acidic Medium

369

Corrosion inhibition of copper by new triazole phosphonate derivatives

370

Corrosion Inhibition of Copper in Acid Medium by Drugs: Experimental and Theoretical Approaches

371

Corrosion inhibition of H-11 type carbon steel in 1 M hydrochloric acid solution by N-propyl amino lauryl amide and its ethoxylated derivatives

372

Corrosion Inhibition of inconel (600) In Sodium Chloride solution by Sodium sulphate

373

Corrosion inhibition of indole-3-acetic acid on mild steel in 0.5 M HCl

374

Corrosion inhibition of iron by amphoteric surfactants in hydrochloric acid solutions

375

Corrosion inhibition of iron in 1 M HCl solution with Schiff base compounds and derivatives

376

Corrosion inhibition of iron in 1M HCl by 1-phenyl-5-mercapto-1,2,3,4-tetrazole

377

Corrosion inhibition of iron in 20% hydrochloric acid by 1,4/1,6-bis(α-octylpyridinium)butane/hexane dibromide

378

Corrosion inhibition of iron in acidic solutions by alkyl quaternary ammonium halides: Correlation between inhibition efficiency and molecular structure

379

Corrosion Inhibition of Iron Using Silicate Base Molecules: A Computational Study

380

Corrosion Inhibition of Mild Steel by Ethanol Extract of Bitter Leaf (Vernonia Amygdalina): Effects of Inhibitor Concentration and Time

381

Corrosion inhibition of mild steel by some pyrazole derivatives in aqueous HCI solutions

382

Corrosion inhibition of mild steel by some schiff base compounds in hydrochloric acid

383

Corrosion inhibition of mild steel in 1 M sulfuric acid solution using anionic surfactant

384

Corrosion inhibition of mild steel in acid solutions by some aromatic oxadiazoles

385

Corrosion inhibition of mild steel in acidic media by [BMIm]Br Ionic liquid

386

Corrosion inhibition of mild steel in acidic media using newly synthesized heterocyclic organic molecules

387

Corrosion Inhibition of Mild Steel in Acidic Solution by Apricot Gum as a Green Inhibitor

388

Corrosion Inhibition of Mild Steel in HCl Solution by 2-acetylpyrazine: Weight Loss and DFT Studies on Immersion Time and Temperature Effects

389

Corrosion inhibition of mild steel in hydrochloric acid by some aromatic hydrazides

390

Corrosion inhibition of mild steel in hydrochloric acid solution by a mercapto-triazole compound

391

Corrosion Inhibition of Mild Steel in Sulphuric Acid Medium by Kovac’s Reagent

392

corrosion inhibition of mild steel surface by isoxazoles in hcl solution: electrochemical studies

393

Corrosion inhibition of mild steel with Schiff base compounds in 1 M HCl

394

Corrosion inhibition of mildsteel in 1 M HCl solution by Artemisia Abrotanum essential oil as an eco-friendly inhibitor

395

Corrosion inhibition of N-80 steel and mild steel in 15% boiling hydrochloric acid by a triazole compound — SAHMT

396

Corrosion inhibition of nickel in H2SO4 solution by alanine

397

Corrosion inhibition of polyaniline and poly(o-methoxyaniline) on stainless steels

398

Corrosion inhibition of powder metallurgy Mg by fluoride treatments

399

Corrosion inhibition of pure iron in 0.5 M H2SO4 solutions by ethanolamines

400

Corrosion Inhibition of SiCp/5A06 Aluminum Metal Matrix Composite by Cerium Conversion Treatment

401

Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface

402

Corrosion inhibition of stainless steel type AISI 304 by Mn coating and subsequent annealing with flow of nitrogen at different temperatures

403

Corrosion inhibition of steam generator tubesheet by Alloy 690 cladding in secondary side environments

404

Corrosion inhibition of steel in 0.5 M H2SO4 by [(2-pyridin-4-ylethyl)thio]acetic acid

405

Corrosion inhibition of steel in concrete with natural inorganic minerals in corrosive environments due to chloride attack

406

CORROSION INHIBITION OF STEEL IN COOLING WATER SYSTEM BY 2-PHOSPHONOBUTANE-1,2,4-TRICARBOXYLIC ACID AND POLYVINYLPYRROLIDONE

407

Corrosion inhibition of steel in sulphuric acid by pyrrolidine derivatives

408

Corrosion inhibition of thiourea and thiadiazole derivatives : A Review

409

Corrosion Inhibition of Water Hyacinth on 1014 Steel in a Chloride Environment

410

Corrosion inhibition of Zinc by Imidazol in Acidic Media

411

CORROSION INHIBITION OF ZINC IN HYDROCHLORIC ACID MEDIUM BY THIOUREA AND GUANIDIN

412

CORROSION INHIBITION OF ZINC IN HYDROCHLORIC ACID MEDIUM USING UREA INHIBITOR

413

Corrosion inhibition of zinc in hydrochloric acid solution using Ampicillin

414

Corrosion Inhibition of Zinc Metal in 2M Hydrochloric Acid Solution by Using GuaifenesinDrug as an Inhibitor and Theoretical Calculations

415

Corrosion Inhibition of Zinc Metal in Hydrochloric acid Solution by Using Ciprofloxacin Drug as an Inhibitor

416

Corrosion inhibition performance of three imidazole derivatives on mild steel in 1 M phosphoric acid

417

Corrosion Inhibition Potential of Benue Propolis Extracts on Carbon Steel in 1.0 M Hydrochloric Acid Medium: Experimental and Computational Studies

418

Corrosion Inhibition Potential of Mentha spicata Extract on Mild Steel in Acidic Medium

419

Corrosion Inhibition Potential of Prosopis Juliflora Leaves Extract on Mild Steel in H2SO4 Solutions

420

Corrosion Inhibition Propargyl Alcohol on Low Alloy Cr Steel in 0.5 M H_2SO-4 in the Absence and Presence of Potassium Iodide

421

Corrosion Inhibition Properties of Sulfonated Polyaniline-Poly(Vinyl Alcohol) Composite on Mild Steel

422

Corrosion Inhibition Studies of Ecbolium Viride Extracts on Mild Steel in HCl

423

Corrosion Inhibition Studies of Ecbolium Viride Extracts on Mild Steel in HCl

424

Corrosion Inhibition Studies on the Influence of Colocasia esculenta Leaves Extract on Mild Steel in 1.0 M HCl.

425

Corrosion Inhibition Study of 5, 5-diphenylimidazolidine-2, 4-dione for Mild Steel Corrosion in 1 M HCl Solution: Experimental, Theoretical Computational and Monte Carlo Simulations Studies

426

Corrosion inhibition, hydrogen evolution and antibacterial properties of newly synthesized organic inhibitors on 316L stainless steel alloy in acid medium

427

Corrosion inhibitive action of cysteine on Cu–30Ni alloy in aerated 0.5 M H2SO4

428

Corrosion Inhibitive Behaviour of the Natural Honey in Acidic Medium of A315 Mild and 304 Austenitic Stainless Steels

429

Corrosion Inhibitive Potentials of Some Amino Acid Derivatives of 1,4-Naphthoquinone–DFT Calculations

430

CORROSION INHIBITIVE PROPERTIES OF EXTRACT OF JATROPHA CURCAS LEAVES ON MILD STEEL IN HYDROCHLORIC ACID ENVIRONMENT

431

Corrosion inhibitive properties of some new isatin derivatives on corrosion of N80 steel in 15% HCl

432

Corrosion inhibitor for the chemical decontamination of primary coolant systems of nuclear power plants

433

Corrosion inhibitor interaction at hydrate–oil interfaces from differential scanning calorimetry measurements

434

Corrosion inhibitor of some surfactants derived from maleic-oleic acid adduct on mild steel in 1 M H2SO4

435

Corrosion Inhibitor Potential of Four Phenyltetrazoles Derivatives using Density Functional Theory and Quantitative Structure-Activity Relationships Approach

436

Corrosion Inhibitor Release from Zn-Al-[PO43-]-[CO32-] Layered Double Hydroxide Nanoparticles

437

Corrosion inhibitor storage and release property of TiO2 nanotube powder synthesized by rapid breakdown anodization method

438

Corrosion inhibitors and other protective systems in concrete repair: concepts or misconcepts

439

Corrosion inhibitors based on chitosan-heptanoate modified beidellite

440

Corrosion inhibitors for anodised aluminium

441

Corrosion inhibitors for chlorides induced corrosion in reinforced concrete structures

442

Corrosion inhibitors for steel in concrete: State-of-the-art report

443

Corrosion inhibitors in concrete: Part III. Effect on time to chloride-induced corrosion initiation and subsequent corrosion rates of steel in mortar

444

Corrosion inhibitors in reinforced concrete structures Part 1: Preventative technique

445

Corrosion inhibitors’ effect on design service life of RC structures

446

Corrosion inhibitory action of ethanol extract from Bagassa guianensis on the corrosion of zinc in ASTM medium

447

Corrosion initiation of reinforced concretes based on Portland or GGBS cements: Chloride contents and electrochemical characterizations versus time

448

Corrosion Investigation of A516-Gr70 and API 5LX70 Steels in H2S Containing Solution

449

Corrosion investigation of Cu–Ni tube desalination plant Original Research Article

450

Corrosion Investigations Due to Increased Sulfidity in Digester House of Paper Mill

451

Corrosion investigations of Al–Fe-coated steels, high Cr steels, refractory metals and ceramics in lead alloys at 700 °C

452

Corrosion investigations of steels in flowing lead at 400°C and 550°C

453

Corrosion issues in nuclear waste disposal

454

Corrosion issues of powder coated AA6060 aluminium profiles

455

Corrosion kinetics and topography analysis of Ti–6Al–4V alloy subjected to different mouthwash solutions

456

Corrosion kinetics of a directionally solidified Ni-base superalloy Original Research Article

457

Corrosion kinetics of battery zinc alloys in electrolyte solutions

458

Corrosion kinetics of Steel T91 in flowing oxygen-containing lead–bismuth eutectic at 450 °C

459

Corrosion kinetics under high pressure of steam of pure zirconium and zirconium alloys followed by in situ thermogravimetry

460

Corrosion management of PbCaSn alloys in lead-acid batteries: Effect of composition, metallographic state and voltage conditions

461

Corrosion measurements of steel reinforcement in concrete exposed to a tropical marine atmosphere

462

Corrosion mechanism and model of pulsed DC microarc oxidation treated AZ31 alloy in simulated body fluid

463

Corrosion mechanism applicable to biodegradable magnesium implants

464

Corrosion mechanism of borosilicate sealing glasses in molten carbonates studied by impedance spectroscopy

465

Corrosion mechanism of laser-melted AA 2014 and AA 2024 alloys

466

Corrosion mechanism of N-containing Fe–Cr–Mo–Y–C–B bulk amorphous alloys in highly concentrated HCl solution

467

Corrosion mechanism of NiCrBSi coatings deposited by HVOF

468

Corrosion mechanism of polycrystalline corundum and calcium hexaluminate by calcium silicate slags

469

Corrosion mechanism of Ti–Cr alloys in solution containing fluoride

470

Corrosion mechanisms in reinforced concrete by acoustic emission

471

Corrosion mechanisms of Al2O3/MgAl2O4 by V2O5, NiO, Fe2O3 and vanadium slag Review Article

472

Corrosion mechanisms of austenitic stainless steels in nitric media used in reprocessing plants

473

Corrosion mechanisms of low porosity ZrO2 based materials during near net shape steel casting

474

Corrosion mitigation of the oil well steels using organic inhibitors – A review

475

Corrosion monitoring of steel in concrete by galvanostatic pulse technique

476

Corrosion morphology and cave wall alteration in an Alpine sulfuric acid cave (Kraushِhle, Austria)

477

Corrosion of 15-5PH H1025 stainless steel due to environmental conditions

478

Corrosion of 15th and early 16th century stained glass from the monastery of Batalha studied with external ion beam

479

Corrosion of 304L stainless steel and chrome-plated drainage together with the ordinary black rubber and brass gaskets by stagnant solutions of sodium hypochlorite solutions

480

Corrosion of a 3D-C/SiC composite in salt vapor environments Original Research Article

481

Corrosion of a stainless steel chemical hood

482

Corrosion of a unidirectionally solidified Al2O3/YAG eutectic composite in a combustion environment

483

Corrosion of AISI 316 Ti in 50% KOH due to deformation induced martensite

484

Corrosion of alkali–borosilicate waste glass K-26 in non-saturated conditions

485

Corrosion of Alloy 617 in high-temperature gas environments

486

Corrosion of Alloy 690 process pot by sulfate containing high level radioactive waste at feed stage

487

Corrosion of Alloy Steel in 30% Ethylene Glycol Solution and CrO24 Under Hydrodynamic Condition Original Research Article

488

Corrosion of alloys used in dentistry: A review

489

Corrosion of alumina and mullite hot gas filter candles in gasification environment

490

Corrosion of alumina-forming austenitic steel Fe–20Ni–14Cr–3Al–0.6Nb–0.1Ti in supercritical water

491

Corrosion of aluminium components studied with MIES, UPS and XPS

492

Corrosion of aluminium metal in OPC- and CAC-based cement matrices

493

Corrosion of aluminum at high voltages in non-aqueous electrolytes containing perfluoroalkylsulfonyl imides; new lithium salts for lithium-ion cells

494

Corrosion of aluminum oxynitride based ceramics by molten steel

495

Corrosion of amalgams under sliding wear

496

Corrosion of amorphous and nanocrystalline Zr-based alloys

497

Corrosion of amorphous and nanocrystalline Zr-based alloys

498

Corrosion of an aircraft radar antenna waveguide

499

Corrosion of an amorphous indium tin oxide film on polyethylene terephthalate at low concentrations of acrylic acid

500

Corrosion of anode current collectors in molten carbonate fuel cells

501

Corrosion of Au particles in air-exposed NaI-treated Au colloidal suspensions

502

Corrosion of austenitic steel in leakage lithium

503

Corrosion of AZS and AZ crucibles in contact with a blast-furnace slag-based glass

504

Corrosion of Ba1−xSrxCo1−yFeyO3−δ and La0.3Ba0.7Co0.2Fe0.8O3−δ materials for oxygen separating membranes under Oxycoal conditions

505

Corrosion of basaltic pumice, colemanite, barite and blast furnace slag coated rebars in concretes

506

Corrosion of Be-based fusion-specific waste materials

507

Corrosion of biological origin observed on concrete digestors

508

Corrosion of brass in a marine environment: mineral products and their relationship to variable oxidation and reduction conditions

509

Corrosion of cadmium plating by runway de-icing chemicals in cyclic tests: Effects of chemical concentration and plating quality

510

Corrosion of cadmium plating by runway de-icing chemicals: Study of surface phenomena and comparison of corrosion tests

511

Corrosion of calcite crystals by metal-rich mud in caves: Study case in Crovassa Ricchi in Argento Cave (SW Sardinia, Italy)

512

Corrosion of carbon steel caustic header in the presence of chloride ions

513

Corrosion of carbon steel in compacted bentonite and its effect on neptunium diffusion under reducing condition

514

Corrosion of carbon steel with NaCl coating in an atmosphere produced by burning emulsified diesel oil

515

Corrosion of central heating systems

516

Corrosion of Ceramic Matrix Composites

517

Corrosion of ceramics for vinasse gasification in supercritical water

518

Corrosion of concrete sewers—The kinetics of hydrogen sulfide oxidation

519

Corrosion of condenser tube materials in distilled water

520

Corrosion of copper electrode in sodium sulfide solution

521

Corrosion of copper-nickel alloys in pure water

522

Corrosion of copper-nickel alloys in simulated vapourside environments Original Research Article

523

Corrosion of Cr bearing low alloy pipeline steel in CO2 environment at static and flowing conditions

524

Corrosion of CrN and CrN/TiN coated heat-resistant steels in molten A356 aluminum alloy

525

Corrosion of Cr–Ni–Mo steel implants electrically stimulated

526

Corrosion of dental aluminium bronze in neutral saline and saline lactic acid

527

Corrosion of dental metallic materials by dental treatment agents

528

Corrosion of ductile iron exhaust brake housing in heavy diesel engines

529

Corrosion of E-glass fiber in simulated oilfield environments

530

Corrosion of electrocast AZS refractories by CAS glass–ceramics melting

531

Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluation

532

Corrosion of exposed rebars, associated mechanical degradation and correlation with accelerated corrosion tests

533

Corrosion of Fe9Cr1Mo steel in stagnant liquid lead–lithium eutectic

534

Corrosion of ferritic–martensitic steel HT9 in supercritical water

535

Corrosion of ferritic–martensitic steels in the eutectic Pb–17Li

536

Corrosion of flexible waveguides

537

Corrosion of Galvanized Strips in Florida Reinforced Earth Walls

538

Corrosion of graphite in industrial phosphoric acid

539

Corrosion of high alumina and near stoichiometric spinels in iron-containing silicate slags

540

Corrosion of high burn-up structured UO2 fuel in presence of dissolved H2

541

Corrosion of high temperature metallic materials in VHTR

542

Corrosion of highly coercive, highly textured Nd-Fe-B films

543

Corrosion of HIPed β-Si6−zAlzOzN8−z (z =0, 1, 2, 3) ceramics by NaCl vapor

544

Corrosion of intra-oral magnets by multi-species biofilms in the presence and absence of sucrose

545

Corrosion of intra-oral magnets in the presence and absence of biofilms of Streptococcus sanguis

546

Corrosion of iron and low alloyed steel within a water saturated brick of clay under anaerobic deep geological disposal conditions: An integrated experiment

547

Corrosion of iron by a perfluorpolyalkylether identified by Mössbauer spectroscopy

548

Corrosion of iron: A study for radioactive waste canisters

549

Corrosion of irradiated MOX fuel in presence of dissolved H2

550

Corrosion of lead and lead alloys: influence of the active mass and of the polarization conditions

551

Corrosion of low-antimony lead–cadmium alloys in conditions of long-term polarization

552

Corrosion of low-carbon cast steel in concentrated synthetic groundwater at 80 to 150°C

553

Corrosion of magnesia–chrome brick in molten MgO–Al2O3–SiO2–CaO–FetO slag

554

Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site

555

Corrosion of magnetic recording heads and media

556

Corrosion of manganese in sulfur dioxide at high temperatures

557

Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications

558

Corrosion of metal and polymer containers for use in PCM cold storage

559

Corrosion of metal bipolar plates for PEM fuel cells: A review

560

Corrosion of metal iron in contact with anoxic clay at 90 °C: Characterization of the corrosion products after two years of interaction

561

Corrosion of metallic interconnects for SOFC in fuel gases

562

Corrosion of metallic stack components in molten carbonates: Critical issues and recent findings

563

Corrosion of Metals and Alloys in High Radiation Fields

564

Corrosion of metals physicochemical principles and current problems: Helmut Kaesche, Springer-Verlag, 2003, 594 pages, 338 figures, ISBN 3-540-00626-5, US list price $159

565

Corrosion of nickel ferrite refractory by Na3AlF6–AlF3–CaF2–Al2O3 bath

566

Corrosion of nickel in molten LiCl–Li2O at 750 °C

567

Corrosion of nickel-based dental casting alloys

568

Corrosion of Ni-Ti Rotary Instruments: A Review

569

Corrosion of ODS steels in lead–bismuth eutectic

570

Corrosion of oxide bonded silicon carbide refractories by molten salts in solid waste-to-energy facilities

571

Corrosion of oxide dispersion strengthened iron–chromium steels and tantalum in fluoride salt coolant: An in situ compatibility study for fusion and fusion–fission hybrid reactor concepts

572

Corrosion of Pb–Ca–Sn alloy during potential step cycles

573

Corrosion of pressureless sintered ZrB2–MoSi2 composite in H2SO4 aqueous solution

574

Corrosion of Prestrained Reinforcement Steel

575

Corrosion of Pure Titanium Sternal Wire

576

Corrosion of rapidly solidified neodymium-iron-boron (NdFeB) permanent magnets and protection via sacrificial zinc coatings

577

Corrosion of rapidly solidified neodymium-iron-boron (NdFeB) permanent magnets and protection via sacrificial zinc coatings

578

Corrosion of rebar in concrete under cyclic freeze–thaw and Chloride salt action

579

Corrosion of reduced activation ferritic martensitic steel JLF-1 in purified Flinak at static and flowing conditions

580

Corrosion of reinforced concrete in a tropical marine environment and in accelerated tests

581

Corrosion of reinforcement in concrete repair

582

Corrosion of reinforcement steel embedded in high water-cement ratio concrete contaminated with chloride

583

Corrosion of screw joints of diffusionally zinc-plated pump-compressor pipes.

584

Corrosion of selected ceramic materials in hot gas environment

585

Corrosion of Si3N4-ceramics in aqueous solutions Part I: Characterisation of starting materials and corrosion in 1 N H2SO4

586

Corrosion of Si3N4-ceramics in aqueous solutions: Part 2. Corrosion mechanisms in acids as a function of concentration, temperature and composition

587

Corrosion of Si3N4–MoSi2 ceramic composite in acid- and basic-aqueous environments: surface modification and properties degradation

588

Corrosion of SiC monofilament/Ti-15-3-3-3 metal-matrix composites in 3.15 wt.% NaCl

589

Corrosion of SiC monofilament/Ti-15-3-3-3 metal-matrix composites in 3.15 wt.% NaCl

590

Corrosion of silicon carbide hot gas filter candles in gasification environment

591

Corrosion of silicon nitride in aqueous acidic solutions: penetration monitoring

592

Corrosion of silicon nitride materials in acidic and basic solutions and under hydrothermal conditions

593

Corrosion of silicon nitride materials in gas turbine environment

594

Corrosion of Sn–Co alloy in alkaline media and the effect of Cly and Bry ions

595

Corrosion of soda lime silicate glasses co-doped with Gd2O3 and Y2O3

596

Corrosion of spinel clinker by CaO–Al2O3–SiO2 ladle slag

597

Corrosion of stainless steels in lead–bismuth eutectic up to 600 °C

598

Corrosion of steel bars in OPC mortar exposed to NaCl, MgCl2 and CaCl2: Macro- and micro-cell corrosion perspective

599

Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes

600

Corrosion of steel fibre reinforced concrete from the cracks

601

Corrosion of steel rebar embedded in natural pozzolan based mortars exposed to chlorides

602

Corrosion of steel reinforcement in concrete of different compressive strengths

603

Corrosion of Steel Reinforcement in Mortar exposed to Hydrogen Sulphide, Part 2: Diffusion Tests

604

Corrosion of Steel Reinforcement in Mortar Specimens exposed to Hydrogen Sulphide, Part 1: Impressed Voltage and Electrochemical Potential Tests

605

Corrosion of steel reinforcements embedded in FRP wrapped concrete

606

Corrosion of Steel Reinforcements in Fly Ash- and Kaolin-based Geopolymer Concrete Immersed in Distilled Water and ASTM Seawater

607

Corrosion of steels with surface treatment and Al-alloying by GESA exposed in lead–bismuth

608

Corrosion of superheater materials in a waste-to-energy plant

609

Corrosion of technical materials in the presence of biofilms—current understanding and state-of-the art methods of study

610

Corrosion of ternary carbides by molten lead

611

Corrosion of the AlFeNi alloy used for the fuel cladding in the Jules Horowitz research reactor

612

Corrosion of the crystalline phases of matte glazes in aqueous solutions

613

Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam

614

Corrosion of three experimental AgMn-based casting alloys

615

Corrosion of Ti-2 and Ti-7 relevant to nickel acid leach chemistry

616

Corrosion of tin in citric acid solution and the effect of some inorganic anions

617

Corrosion of Ti–STS dissimilar joints brazed by a Ag interlayer and Ag–Cu–(Pd) alloy fillers

618

Corrosion of titanium and amalgam couples: Effect of fluoride, area size, surface preparation and fabrication procedures

619

Corrosion of transversely heated graphite tubes by iron and lanthanum matrices

620

Corrosion of type 6061-T6 aluminum in mercury and mercury vapor

621

Corrosion of UO2 and ThO2: A quantum-mechanical investigation

622

Corrosion of V–Ti–Cr alloys in liquid lithium: influence of alloy composition and concentration of nitrogen in lithium

623

Corrosion of Zinc Ferrite Based Inert Anodes in AlF3-NaF-Al2O3 Melts Under Conditions of Anodic Polarization

624

Corrosion of β-sialon-based ceramics by molten steel

625

Corrosion on silicon sensors

626

Corrosion on silicon sensors

627

Corrosion performance and mechanical stability of 316L/DLC coating system: Role of interlayers

628

Corrosion Performance of (Ha-Psz) Bio Ceramic Coated Ti-20Co Alloy in Simulated Physiological Media

629

Corrosion performance of a hot-dip galvanized steel treated by different kinds of conversion coatings

630

Corrosion performance of an additive manufactured 316L stainless steel in the concrete pore solution

631

Corrosion performance of anodic films containing polyaniline and TiO2 nanoparticles on AA3105 aluminium alloy

632

Corrosion performance of conventional (ASTM A615) and low-alloy (ASTM A706) reinforcing bars embedded in concrete and exposed to chloride environments

633

Corrosion performance of duplex treatments based on plasma nitriding and PAPVD TiAlN coating

634

Corrosion performance of electroless Ni–P on polymer coating of MAO coated AZ31 magnesium alloy

635

Corrosion performance of epoxy-coated reinforcing steel: North American experience

636

Corrosion performance of heat resistant alloys in Na2SO4–V2O5 molten salts

637

Corrosion performance of iron aluminides in mixed-oxidant environments

638

Corrosion performance of iron aluminides in mixed-oxidant environments

639

Corrosion performance of medium-strength and silica fume high-strength reinforced concrete in a chloride solution

640

Corrosion performance of molybdenum silicides in acid solutions

641

Corrosion performance of molybdenum silicides in acid solutions

642

Corrosion performance of plasma-sprayed cast iron coatings on aluminum alloy for automotive components

643

Corrosion performance of PVD-coated and anodised materials for the decorative market

644

Corrosion performance of rice husk ash blended concrete

645

Corrosion performance of self-doped sulfonated polypyrrole coatings on stainless steel

646

Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor

647

Corrosion performance of the plasma nitrided 316L stainless steel

648

Corrosion performance of thin amorphous carbon films on aluminum formed by ion beam-based coating techniques

649

Corrosion performance of TiO2 coated type 304L stainless steel in nitric acid medium

650

Corrosion performance of welded stainless steels reinforcements in simulated pore solutions

651

Corrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk metallic glasses

652

Corrosion phenomena of alloys by subcritical and supercritical water oxidation of 2-chlorophenol

653

Corrosion pit size distributions and fatigue lives—a study of the EIFS technique for fatigue design in the presence of corrosion

654

Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis

655

Corrosion potential recovery of dental amalgam restorations following prophylaxis

656

Corrosion potential variation of aged dental amalgam restorations over time

657

Corrosion Prediction for Corrosion Rate of Carbon Steel in Oil and Gas Environment: A Review

658

Corrosion prevention and remediation strategies for reinforced concrete coastal bridges

659

Corrosion prevention of Er2O3 by O control in Li

660

Corrosion prevention of graphite collector in vanadium redox flow battery

661

Corrosion problem in headspace gas chromatography with phase reaction conversion technique

662

Corrosion problems during oil and gas production and its mitigation

663

Corrosion problems in tinplate cans for storing contact glues for shoes

664

Corrosion process and abatement in reinforced concrete wrapped by fiber reinforced polymer

665

Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment

666

Corrosion product deposits on boiling-water reactor cladding: Experimental and theoretical investigation of magnetic properties

667

Corrosion Products and Formation Mechanism During Initial Stage of Atmospheric Corrosion of Carbon Steel Original Research Article

668

Corrosion products of reinforcement in concrete in marine and industrial environments

669

Corrosion Products Study of VVER-440 Secondary Circuit

670

Corrosion propagation of prestressing steel strands in concrete subject to chloride attack

671

Corrosion properties and corrosion evolution of as-cast AZ91 alloy with rare earth yttrium

672

Corrosion Properties of 34CrMo4 Steel Modified by Shot Peening

673

Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane

674

Corrosion properties of a Cr13Ni5Si2-based metal silicide alloy

675

Corrosion properties of alumina and titania NF membranes

676

Corrosion properties of aluminium coatings deposited on sintered NdFeB by ion-beam-assisted deposition

677

Corrosion properties of duplex treated Ti–6Al–4V alloy in chloride media using electrochemical and positron annihilation spectroscopy techniques

678

Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy

679

Corrosion properties of Fe–24Cr stainless alloy modified by plasma immersion ion implantation in 0.5 M sulfuric acid solution

680

Corrosion properties of Fe–Cr–Nb–B amorphous alloys and coatings

681

Corrosion properties of glassy Mg70Al15Ga15 in 0.1 M NaCl solution

682

Corrosion properties of high-performance CoNiFe based soft magnetic thin films prepared by electro or electroless deposition

683

Corrosion properties of HVOF-coated steel in simulated concrete pore electrolyte and concentrated chloride environments

684

Corrosion properties of in situ laser remelted NiCrBSi coatings comparison with hard chromium coatings

685

Corrosion properties of ion beam modified fullerene thin films on iron substrates

686

Corrosion Properties of Light-weight and High-strength 2195 Al-Li Alloy

687

Corrosion properties of micro- and nanocomposite copper matrix coatings produced from a copper pyrophosphate bath under pulse current

688

Corrosion properties of N-doped austenitic stainless steel films prepared by IBAD

689

Corrosion properties of oxide dispersion strengthened steels in super-critical water environment

690

Corrosion properties of oxygen plasma immersion ion implantation treated magnesium

691

Corrosion properties of plasma-sprayed Al2O3-TiO2 coatings on Ti metal

692

Corrosion properties of stainless steel 316 L after energetic nitrogen insertion

693

Corrosion properties of thermally annealed and co-sputtered nickel silicide thin films

694

Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-by-layer coatings on AZ31 magnesium alloys

695

Corrosion protection by epoxy coating containing multi-walled carbon nanotubes

696

Corrosion protection by multilayer coating using layer-by-layer technique

697

Corrosion protection by polyaniline-coated latex microspheres

698

Corrosion protection by sonoelectrodeposited organic films on zinc coated steel

699

Corrosion protection by sonoelectrodeposited organic films on zinc coated steel

700

Corrosion protection by zirconia-based thin films deposited by a sol–gel spin coating method

701

Corrosion Protection Evaluation of Mild Steel Painted Surface by Electrochemical Impedance Spectroscopy

702

Corrosion protection for aerospace aluminum alloys by Modified Self-assembled NAnophase Particle (MSNAP) sol–gel

703

Corrosion protection investigation of reinforcement by inorganic coating in the presence of alkanolamine-based inhibitor

704

Corrosion protection of 304 stainless steel bipolar plates using TiC films produced by high-energy micro-arc alloying process

705

Corrosion protection of a thin aluminium layer deposited on polyester

706

Corrosion protection of AA2024 sealed anodic layers using the hydrophobic properties of carboxylic acids

707

Corrosion protection of AA6061 T6 by fluoropolymer coatings in NaCl solution

708

Corrosion Protection of AISI 304 Stainless Steel using Thin Films of Manganese Nitride

709

Corrosion protection of aluminum alloys by coatings of unique poly(diphenyl amine)-derivative conducting polymers

710

Corrosion protection of aluminum alloys by double-strand polyaniline

711

Corrosion protection of aluminum and aluminum alloys by polyanilines: A potentiodynamic and photoelectron spectroscopy study

712

Corrosion protection of aluminum borate whisker reinforced AA6061 composite by cerium oxide-based conversion coating

713

Corrosion protection of aluminum composites by silicate/cerate conversion coating

714

Corrosion protection of AZ31 magnesium alloy by a TiO2 coating prepared by LPD method

715

Corrosion protection of biodegradable magnesium implants using anodization

716

Corrosion protection of carbon steel by an epoxy resin containing organically modified clay

717

Corrosion Protection of Carbon Steel by Highly Processable Conducting Polyaniline doped Phosphoric Acid and Dodecyl benzenesulfonic Acid

718

Corrosion Protection of Carbon Steel Using Polyaniline Composite with Aluminium Oxide

719

Corrosion Protection of Carbon Steel Using Polyaniline Composite with Inorganic Pigments

720

Corrosion protection of cement-based building materials by surface deposition of CaCO3 by Bacillus pasteurii

721

Corrosion protection of cold-rolled steel with alkyd paint coatings composited with submicron-structure types polypyrrole-modified nano-size alumina and carbon nanotubes

722

Corrosion Protection of Copper with Hybrid Sol-Gel Containing 1H-1, 2, 4-triazole-3-thiol

723

Corrosion Protection of Electro-Galvanized Steel by Green Conversion Coatings

724

Corrosion protection of ENIG surface finishing using electrochemical methods

725

Corrosion protection of iron in water by activated carbon fiber (ACF) Original Research Article

726

Corrosion protection of iron/steel by emeraldine base polyaniline: an X-ray photoelectron spectroscopy study

727

Corrosion Protection of Low Carbon Steel by Coating of Graphene Oxide Nanoparticles and Galvanization Process

728

Corrosion protection of low carbon steel with polyaniline: passivation or inhibition?

729

Corrosion protection of magnesium alloy AZ31 by coating with poly(ether imides) (PEI)

730

Corrosion protection of magnesium by electroactive polypyrrole/paint coatings

731

Corrosion protection of magnetron sputtered TiN coatings deposited on high strength aluminium alloys

732

Corrosion protection of Mg/Al alloys by thermal sprayed aluminium coatings

733

Corrosion protection of mild carbon steel media in phosphate grinding mill using impressed current technology

734

Corrosion protection of mild steel by coatings containing polyaniline

735

Corrosion protection of mild steel by electroactive polyaniline coatings

736

Corrosion protection of NdFeB magnets by phosphating with tungstate incorporation

737

Corrosion protection of Nd–Fe–B type permanent magnets by zinc phosphate surface conversion coatings

738

Corrosion protection of non-alloyed AIAI 316L concrete steel metal grade in aqueous H2SO4: Electroanalytical and surface analyses with Metiamide

739

Corrosion protection of polypyrrole electrodeposited on AZ91 magnesium alloys in alkaline solutions

740

Corrosion protection of stainless steel by polysiloxane hybrid coatings prepared using the sol–gel process

741

Corrosion protection of steel by catalyzed polypyrrole films

742

Corrosion protection of steel in pumice lightweight mortar by coatings

743

Corrosion protection of steel with DMEA-based organic inhibitor

744

Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane

745

Corrosion protection of ultra-thin ta-C films for recording slider applications at varied substrate bias

746

Corrosion protection performance of High Performance Fiber Reinforced Cement Composites as a repair material

747

Corrosion protection performance of microsilica added concretes in NaCl and seawater environments

748

Corrosion Protection Performance of Nanoclay-Polyester Nanocomposite Coatings

749

Corrosion protection performance of porous strontium hydroxyapatite coating on polypyrrole coated 316L stainless steel

750

Corrosion protection properties of anodic oxide coatings on an Al–Si alloy

751

Corrosion protection properties of electroless Nickel/PTFE, Phosphate/MoS2 and Bronze/PTFE coatings applied to improve the wear resistance of carbon steel

752

Corrosion protection property of colloidal silicate film on galvanized steel

753

Corrosion protection provided by chemical inhibitors to damaged FBEC bars

754

Corrosion Protection Study of Carbon Steel and 316 Stainless Steel Alloys Coated by Nanoparticles

755

Corrosion protection using polyanujne coating formulations

756

Corrosion protection with hard coatings on steel: Past approaches and current research efforts

757

Corrosion protective polyaniline epoxy blend coatings on mild steel

758

Corrosion protective properties of nanostructured sol–gel hybrid coatings to AA2024-T3

759

Corrosion rate evolution in concrete structures exposed to the atmosphere

760

Corrosion rate monitoring in the laboratory and on-site

761

CORROSION RATE OF CARBON STEEL FOR FLOWLINE AND PIPELINE AS TRANSMISSION PIPE IN NATURAL GAS PRODUCTION WITH CO2 CONTENT

762

Corrosion rate of ordinary and high-performance concrete subjected to chloride attack by AC impedance spectroscopy

763

Corrosion rate of parent and weld materials of F82H and JPCA steels under LBE flow with active oxygen control at 450 and 500 °C

764

Corrosion Reliability Assessment of underground Water Transmission Pipelines by IHS Algorithm

765

Corrosion resistance and biocompatibility of Ni-free Zr-based bulk metallic glass for biomedical applications

766

Corrosion resistance and biocompatibility of Ti–Ta alloys for biomedical applications

767

Corrosion resistance and biocompatibility of Ti–Ta alloys for biomedical applications

768

Corrosion resistance and blood compatibility of lanthanum ion implanted pure iron by MEVVA

769

Corrosion resistance and characterization of metallic coatings deposited by thermal spray on carbon steel

770

Corrosion resistance and chloride diffusivity of volcanic ash blended cement mortar

771

Corrosion resistance and corrosion fatigue strength of new titanium alloys for medical implants without V and Al

772

Corrosion resistance and corrosion fatigue strength of new titanium alloys for medical implants without V and Al

773

Corrosion resistance and interfacial contact resistance of TiN coated 316L bipolar plates for proton exchange membrane fuel cell

774

Corrosion resistance and lubricated sliding wear behaviour of novel Ni–P graded alloys as an alternative to hard Cr deposits

775

Corrosion resistance and microstructural evaluation of the chromized coating process in a dual phase FeMnAlCr alloy

776

Corrosion resistance and microstructure of electrodeposited nickel–cobalt alloy coatings

777

Corrosion resistance and performance of copper–nickel and titanium alloys in MSF distillation plants Original Research Article

778

Corrosion resistance and performance of steel alloys in MSF distillation plants Original Research Article

779

Corrosion Resistance and Semiconducting Properties of the Passive Films on Duplex Stainless Steel 2205

780

Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy

781

Corrosion resistance and wear resistance of plasma electrolytic oxidation coatings on metal matrix composites

782

Corrosion resistance characterization of porous alumina membrane supports

783

Corrosion Resistance Enhancement of AZ91 Magnesium Alloy Using Ni-P Interlayer and Electrophoretic Deposited 3YSZ Coating

784

Corrosion resistance enhancement of Ni–P electroless coatings by incorporation of nano-SiO2 particles

785

Corrosion resistance evaluation of the UNS S31803 duplex stainless steels aged at low temperatures (350 to 550◦C) using DLEPR tests

786

Corrosion resistance improvement in Gas Tungsten Arc Welded 316L stainless steel joints through controlled preheat treatment

787

Corrosion resistance improvement of magnesium alloy using nitrogen plasma ion implantation

788

Corrosion resistance in activated fly ash mortars

789

Corrosion resistance in FSW and in MIG welding techniques of AA6XXX

790

Corrosion resistance measurements of dental alloys, are they correlated?

791

Corrosion resistance of 316L stainless steel with surface layer of Ni2Al3 or NiAl in molten carbonates

792

Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy

793

Corrosion resistance of a Zn–Ni electrodeposited alloy obtained with a controlled electrolyte flow and gelatin additive

794

Corrosion resistance of aged die cast magnesium alloy AZ91D

795

Corrosion resistance of aged die cast magnesium alloy AZ91D

796

Corrosion resistance of AISI304 stainless steel treated by hybrid elevated-temperature, low-voltage/high-voltage nitrogen plasma immersion ion implantation

797

Corrosion resistance of AISI304 stainless steel treated by hybrid elevated-temperature, low-voltage/high-voltage nitrogen plasma immersion ion implantation

798

Corrosion resistance of Al ion implanted AZ31 magnesium alloy at elevated temperature

799

Corrosion resistance of Al-alloying high Cr–ODS steels in stagnant lead–bismuth

800

Corrosion resistance of Al-based metal matrix composites

801

Corrosion resistance of Al-based metal matrix composites

802

Corrosion resistance of alloys F91 and Fe–12Cr–2Si in lead–bismuth eutectic up to 715 °C

803

Corrosion resistance of AlN–SiC–TiB2 composite in air

804

Corrosion resistance of amorphous and nanocrystalline Fe–M–B (MZr, Nb) alloys

805

Corrosion resistance of anodised single-phase Mg alloys

806

Corrosion Resistance of AZ91D Magnesium Alloy Modified by Rare Earths-Laser Surface Treatment

807

Corrosion resistance of AZ91D magnesium alloy with electroless plating pretreatment and Ni–TiO2 composite coating

808

Corrosion resistance of BaTiO3 films prepared by plasma electrolytic oxidation

809

Corrosion resistance of biomimetic calcium phosphate coatings on magnesium due to varying pretreatment time

810

Corrosion resistance of ceramic materials in pyrochemical reprocessing condition by using molten salt for spent nuclear oxide fuel Original Research Article

811

Corrosion resistance of cerium-based conversion coatings on alumina borate whisker reinforced AA6061 composite

812

Corrosion Resistance of Cerium-Conversion Coated AZ31 Magnesium Alloys in Cerium Nitrate Solutions

813

Corrosion resistance of chromium nitride and oxynitride layers produced under glow discharge conditions

814

Corrosion resistance of chromium-free conversion coatings deposited on electrogalvanized steel from potassium hexafluorotitanate(IV) containing bath

815

Corrosion resistance of chromized 316L stainless steel for PEMFC bipolar plates

816

Corrosion resistance of cold-sprayed Ta coatings in very aggressive conditions

817

Corrosion resistance of copper–nickel alloy under fluid jet impingement Original Research Article

818

Corrosion resistance of Cr(III) conversion treatments applied on electrogalvanised steel and subjected to chloride containing media

819

Corrosion resistance of CrN thin films produced by dc magnetron sputtering

820

Corrosion resistance of duplex and gradient CrNx coated H13 steel

821

Corrosion resistance of electrodeposited Ni–Al composite coatings on the aluminum substrate

822

Corrosion resistance of electrolessly deposited Ni–P and Ni–W–P alloys with various structures

823

Corrosion resistance of electrolessly deposited Ni–P and Ni–W–P alloys with various structures

824

Corrosion resistance of electrolessly deposited Ni–P and Ni–W–P alloys with various structures

825

Corrosion Resistance of Galvanized Steel in the Environment of a Bioreactor

826

Corrosion Resistance of High Performance Weathering Steel for Bridge Building Applications Original Research Article

827

Corrosion resistance of high-Cr oxide dispersion strengthened ferritic steels in super-critical pressurized water

828

Corrosion resistance of HVOF-sprayed Ni2Si intermetallic coatings in hot H2SO4 medium

829

Corrosion resistance of intramedullary nails used in elastic osteosynthesis of children

830

Corrosion resistance of iron–platinum magnets

831

Corrosion resistance of laser clad Cr-alloyed Ni2Si/NiSi intermetallic coatings

832

Corrosion resistance of Mg–Al-LDH coating on magnesium alloy AZ31

833

Corrosion resistance of Mo–Fe–Ti alloy for overpack in simulating underground environment

834

Corrosion resistance of molybdenum-containing titanium alloy for overpack in simulating underground environment

835

Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate

836

Corrosion resistance of multi-layered plasma-assisted physical vapour deposition TiN and CrN coatings

837

Corrosion resistance of nanocrystalline Mg–Cr alloys deposited by magnetron sputtering

838

Corrosion resistance of Ni/Cu/Ni–P triple-layered coating on Mg–Li alloy

839

Corrosion resistance of niobium carbide coatings produced on AISI 1045 steel via thermo-reactive diffusion deposition

840

Corrosion resistance of nitrided layers on austenitic steel

841

Corrosion resistance of nitrogenated amorphous carbon films prepared by facing target sputtering

842

Corrosion resistance of nitrogen-implanted Zircaloy-4 in high-temperature water

843

Corrosion resistance of phosphated Zn–Ni alloy electrodeposits

844

Corrosion Resistance of Plasma Sprayed Ceramic Composite Coatings on Q235 Substrate

845

Corrosion resistance of plasma-oxidized stainless steel

846

Corrosion resistance of refractory metals in high-temperature water

847

Corrosion resistance of repair welded naval aluminium alloys

848

Corrosion resistance of self-compacting concrete incorporating quarry dust powder, silica fume and fly ash

849

Corrosion resistance of self-consolidating concrete in full-scale reinforced beams

850

Corrosion resistance of Si- and Al-rich steels in flowing lead–bismuth

851

Corrosion resistance of sintered duplex stainless steels in the salt fog spray test

852

Corrosion Resistance of Sintered NdFeB Permanent Magnet With Ni-P/Tio22 Composite Film Original Research Article

853

Corrosion resistance of stainless steel bipolar plates in a PEFC environment: A comprehensive study

854

Corrosion resistance of stainless steel coated with sol–gel silica

855

Corrosion resistance of stainless steel coatings elaborated by solar cladding process

856

Corrosion resistance of steel-based surface alloyed materials fabricated with Fe-based metamorphic powders by high-energy electron beam irradiation

857

Corrosion resistance of structural materials in high-temperature aqueous sulfuric acids in thermochemical water-splitting iodine–sulfur process

858

Corrosion resistance of structural materials to Ga2O at 1000 °C

859

Corrosion resistance of the electro-galvanized steel treated in a titanium conversion solution

860

Corrosion resistance of the intermetallic compound, NiAl, in a molten carbonate fuel cell environment

861

Corrosion resistance of the polymer matrix hard magnetic composite materials Nd–Fe–B

862

Corrosion resistance of the vacuum arc deposited Ti, TiN and TiO2 coatings on large area glass substrates

863

Corrosion resistance of thermally sprayed Al and Al/SiC coatings on Mg

864

Corrosion resistance of TiN coated biomedical nitinol under deformation

865

Corrosion resistance of TiN coatings produced by various dry processes

866

Corrosion resistance of TiN/TiAlN-coated ADI by cathodic arc deposition

867

Corrosion resistance of TiO2 films grown on stainless steel by atomic layer deposition

868

Corrosion Resistance of Waterborne Epoxy Resin Coating Cross-Linked by Modified Tetrabutyl Titanate

869

Corrosion resistance of W–Cr–C coatings fabricated by spark plasma sintering method

870

Corrosion Resistance of Zinc Coatings with Aluminium Additive

871

Corrosion resistance of zirconium and zirconium-titanium alloy in hot nitric acid

872

Corrosion resistance of zirconium and zirconium-titanium alloy in hot nitric acid

873

Corrosion resistance of Zn–Co–Fe alloy coatings on high strength steel

874

Corrosion resistance of ZrN films on AISI 304 stainless steel substrate

875

Corrosion Resistance on High Strength Bainitic Steel and 09CuPCrNi After Wet-Dry Cyclic Conditions Original Research Article

876

Corrosion resistance properties of enamels with high B2O3–P2O5 content to molten aluminum

877

Corrosion resistance properties of enamels with high B2O3–P2O5 content to molten aluminum

878

Corrosion resistance properties of organic–inorganic hybrid coatings on 2024 aluminum alloy

879

Corrosion resistance properties of reactive plasma-sprayed titanium composite coatings

880

Corrosion resistance properties of superhydrophobic copper surfaces fabricated by one-step electrochemical modification process

881

Corrosion resistance property of the ceramic coating obtained through microarc oxidation on the AZ31 magnesium alloy surfaces

882

Corrosion resistance study of argon implanted and ion-beam-mixed 316 SS

883

Corrosion resistance study of Fe–Mn–Al–C alloys using immersion and potentiostatic tests

884

Corrosion resistance tests on NiTi shape memory alloy

885

Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V

886

Corrosion resistances of alloys in high temperature hydrogen iodide gas environment for sulfur–iodine thermochemical cycle

887

Corrosion resistant and adsorbent plasma polymerized thin film

888

Corrosion resistant engine for odour control with electricity generation

889

Corrosion resistant material selection for the manufacturing of marine diesel exhausts scrubbers

890

Corrosion resistant performance of a chemical quenched rebar in concrete

891

Corrosion resistant properties of polyaniline–acrylic coating on magnesium alloy

892

CORROSION RESISTANT SOL–GEL COATING ON 2024-T3 ALUMINUM

893

Corrosion resistant surface for vanadium nitride and hafnium nitride layers as function of grain size Original Research Article

894

Corrosion resistant Ti-Pd surface alloys produced by high intensity pulsed plasma beams: Part 1. Deposition by pulsed erosion and vacuum evaporation/pulsed implantation doping modes

895

Corrosion resistant Ti–Pd surface alloys produced by high intensity pulsed plasma beams: Part II. Deposition by pulsed implantation doping mode with palladium implantation using a MEVVA source

896

Corrosion resistant ZrO2 thin films prepared at room temperature by ion beam induced chemical vapour deposition

897

Corrosion response of surface engineered titanium alloys damaged by prior abrasion

898

Corrosion risks in shipsʹ ballast tanks and the IMO pathogen guidelines

899

Corrosion Science and Technology, David E.J. Talbot and James D.R. Talbot, 2007, CRC Press (Taylor and Francis Group) 2nd edition, ISBN 10:0-8493-9248-9 Price £44.99/US$ 129.95, 523 pp.

900

Corrosion sensors for engine oils—laboratory evaluation and field tests

901

Corrosion sensors for engine oils—laboratory evaluation and field tests

902

Corrosion stability of Zn–Co alloys deposited from baths with high and low Co content — The influence of deposition current density

903

Corrosion standards II: National, European and international standards, 1990–1995: Edited by P. McIntyre and D. Mills (The Institute of Materials, London, 1996), 170+ pages, $70.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield,

904

Corrosion Strategy in Oil Field System

905

Corrosion studies in liquid Pb–Bi alloy at JAERI: R & D program and first experimental results

906

Corrosion studies of a copper–beryllium alloy in a simulated polymer electrolyte membrane fuel cell environment

907

Corrosion studies of carbon nanotubes–Zn composite coating

908

Corrosion Studies of Carbon Steel in 3% NaCl Solution in Presence of Expired Ceftin: Investigation of Environmental Friendly Corrosion Inhibitor

909

Corrosion studies of different ferrous alloys for rolling cylinders

910

Corrosion studies of modified organosilane coated magnesium–yttrium alloy in different environments

911

Corrosion studies related to suitability of permanent magnets for biomedical applications

912

Corrosion studies with a new laboratory-scale system simulating large-scale diesel engines operating with residual fuels: Part I. Corrosion of Nimonic 80 A samples

913

Corrosion studies with a new laboratory-scale system simulating large-scale diesel engines operating with residual fuels: Part II. Particle and deposit characteristics

914

Corrosion study at Cu–Al interface in microelectronics packaging

915

Corrosion study of a highly durable electrolyzer based on cold crucible technique for pyrochemical reprocessing of spent nuclear oxide fuel

916

Corrosion study of a Zn–22Al–2Cu alloy coated with Y2O3

917

Corrosion study of an austenitic steel in Pb–17Li under magnetic field and rotating flow

918

Corrosion study of anisotropic conductive joints on polyimide flexible circuits

919

Corrosion study of ceria coatings on AA6060 aluminum alloy obtained by cathodic electrodeposition: Effect of deposition potential

920

Corrosion study of plasma sintered unalloyed iron: The influence of porosity sealing and Ni surface enrichment

921

Corrosion study of plasma sintered unalloyed iron: The influence of porosity sealing and Ni surface enrichment

922

Corrosion study of PVD coatings and conductive polymer deposited on mild steel: Part I: Polypyrrole

923

Corrosion study of SS430/Nb as bipolar plate materials for PEMFCs

924

Corrosion susceptibility comparison of EUROFER steel in contact two lithium silicate breeders

925

Corrosion susceptibility investigation of Ti–O film modified cobalt-chromium alloy (L-605) vascular stents by cyclic potentiodynamic polarization measurement

926

Corrosion susceptibility of EUROFER97 in lithium ceramics breeders

927

Corrosion susceptibility of steel drums containing cemented intermediate level nuclear wastes

928

Corrosion susceptibility of titanium covered by dental cements

929

Corrosion testing in superheated geothermal steam in Iceland

930

Corrosion testing of platinum metals CVD coated titanium anodes in seawater-simulated solutions

931

Corrosion trends of Ti based Shape Memory Alloys having biomedical applications: A perspective study

932

Corrosion wear behaviors of 2024Al in artificial rainwater and seawater at fretting contact

933

Corrosion wear behaviors of micro-arc oxidation coating of Al2O3 on 2024Al in different aqueous environments at fretting contact

934

Corrosion wear fracture of new β type biomedical titanium alloys

935

Corrosion wear fracture of new β type biomedical titanium alloys

936

Corrosion, Al containing corrosion barriers and mechanical properties of steels foreseen as structural materials in liquid lead alloy cooled nuclear systems

937

Corrosion, erosion and erosion–corrosion performance of plasma electrolytic oxidation (PEO) deposited Al2O3 coatings

938

Corrosion, fatigue and corrosion fatigue behaviour of metal implant materials, especially titanium alloys

939

Corrosion, oxidation and strength properties of Nicalon SiC fibre under loading

940

Corrosion, oxidation and strength properties of Nicalon SiC fibre under loading

941

Corrosion, Passivity and Pitting of Inconel (600) in Sulphuric Acid

942

Corrosion/precipitation in non-isothermal and multi-modular LBE loop systems

943

Corrosion–erosion behavior of TiN-coated stainless steels in aqueous slurries

944

Corrosion–erosion of nitrogen bearing martensitic stainless steels in seawater–quartz slurry

945

Corrosion–erosion of TiN-PVD coatings in collagen and cellulose meat casing

946

Corrosion–erosion test of SS316 in flowing Pb–Bi

947

Corrosion–erosion test of SS316L grain boundary engineering material (GBEM) in lead bismuth flowing loop

948

Corrosion–erosion wear behaviors of 13Cr24Mn0.44N stainless steel in saline–sand slurry

949

Corrosion–erosion wear of refractory bricks in glass furnaces

950

Corrosion-fatigue behaviour of 7075-T651 aluminum alloy subjected to periodic overloads

951

Corrosion–fatigue of A1N railway axle steel exposed to rainwater

952

Corrosion–fatigue properties of a 4340 steel coated with Colmonoy 88 alloy, applied by HVOF thermal spray

953

Corrosion–fatigue studies of the Zr-based Vitreloy 105 bulk metallic glass

954

Corrosion–fatigue studies of the Zr-based Vitreloy 105 bulk metallic glass

955

Corrosion-induced gas generation in a nuclear waste repository: Reactive geochemistry and multiphase flow effects

956

Corrosion-induced release of chromium and iron from ferritic stainless steel grade AISI 430 in simulated food contact Original Research Article

957

Corrosion-inhibiting effect of Mimosa extract on brass-MM55 corrosion in 0.5 M H2SO4 acidic media

958

CorrosionofsteamgeneratorpipelinesanalysedusingMössbauerspectroscopyOriginalResearchArticle

959

Corrosionofvesselsteelduringitsinteractionwithmoltencorium:Part1:ExperimentalOriginalResearchArticle

960

Corrosionofvesselsteelduringitsinteractionwithmoltencorium:Part2:ModeldevelopmentOriginalResearchArticle

961

Corrosion-resistant amorphous aluminum alloys and structure of passive films

962

Corrosion-resistant amorphous aluminum alloys and structure of passive films

963

Corrosion-resistant analogue of Hadfield steel

964

Corrosion-resistant component for PEM fuel cells

965

Corrosion-resistant iron thin films formed by pulsed laser deposition with cast iron targets

966

Corrosion-resistant metal layers from a CMOS process for bioelectronic applications

967

Corrosion-resistant metallic coatings for applications in highly aggressive environments

968

Corrosion-resistant MnZrCr alloys in chloride-containing media

969

Corrosion-resistant MnZrCr alloys in chloride-containing media

970

Corrosion-resistant NiCrMo alloys in hot concentrated sulphuric acid with active carbon

971

Corrosion-resistant NiCrMo alloys in hot concentrated sulphuric acid with active carbon

972

Corrosion-Resistant Tubular Air Heaters

973

Corrosion-Resistant Tubular Air Heaters

974

Corrosion-wear behaviour of PVD Cr/CrN multilayer coatings for gear applications

975

Corrosion-wear evaluation of a UHMWPE/Co–Cr couple in sliding contact under relatively low contact stress in physiological saline solution

976

Corrosion–wear mechanisms of hard coated austenitic 316L stainless steels

977

Corrosion-wear monitoring of TiN coated AISI 316 stainless steel by electrochemical noise measurements

978

Corrosion-wear monitoring of TiN coated ASP23 steel by electrochemical noise measurements

979

Corrosion-wear of passivating materials in sliding contacts based on a concept of active wear track area

980

Corrosive adsorption of Sn on the Pt(1 1 0)(1×2) surface

981

Corrosive attack of glass by a pharmaceutical compound

982

Corrosive behavior of chromium carbide-based films formed on steel using a filtered cathodic vacuum arc system

983

Corrosive degradation and failure of vertical furnace wall tubes of a boiler

984

Corrosive delamination and ion transport along stretch-formed thin conversion films on galvanized steel

985

Corrosive effect of acrylic acid on magnetic head and media of an operating hard disk drive

986

Corrosive effects of salt hydrate phase change materials used with aluminium and copper

987

Corrosive fatigue of structures with dimple holes under spectrum loading

988

Corrosive Injuries Admitted to Hospitals of Rasht city during 2002-2009

989

Corrosive injury from arterial injection of hydrochloric acid

990

Corrosive Injury of the Upper Gastrointestinal Tract: Review of Surgical Management and Outcome in 14 Adult Cases

991

Corrosive Poisonings in Adults

992

Corrosive Poisonings in Adults

993

Corrosive properties of fluoride-containing odontologic gels against titanium

994

Corrosive sliding wear behavior of laser clad Mo2Ni3Si/NiSi intermetallic coating

995

Corrosive wear resistance of Mg–Al–Zn alloys with alloyed yttrium

996

Corrosivities in a pilot-scale combustor of a British and two Illinois coals with varying chlorine contents

997

Corrosivity of Br− and Cl− on duplex stainless steel

998

Corrosivity of Br− and Cl− on duplex stainless steel

999

Corrosivity of flue gases during co-firing Chinese biomass with coal at fluidised bed conditions

1000

Corrosivity of long-term fire retardant Fire Trol® 931 and Fire Foam® 103 on aluminium alloys and steel

بازگشت