ليست عنوان مقالات لاتين Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel Influence of giant kelp beds (Macrocystis pyrifera) on diel cycles of pCO2 and DIC in the Sub-Antarctic coastal area

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel

2

Influence of Er:YAG laser on tensile bond strength of a self-etching system and a flowable resin in different dentin depths

3

Influence of Er3+ doping on microstructure of oxyfluoride glass–ceramics

4

Influence of Er3+ on the early stages of crystallization of chloro-tellurite glasses studied by XRD and EXAFS

5

Influence of erbia or europia doping on crystal structure and microstructure of ceria–zirconia (CZ) solid solutions

6

Influence of Erbium Addition on the Microstructural Evolution and Tensile Properties of Al/Mg2Si In-Situ Metal Matrix Composites

7

Influence of erosion and deposition on carbon and nitrogen accumulation in resampled steepland soils under pasture in New Zealand

8

Influence of erosion and sedimentation on strike-slip fault systems: insights from analogue models

9

Influence of erroneous learning samples on adaptation in on-line handwriting recognition

10

Influence of erythrocyte aggregation on leukocyte margination in postcapillary expansions: A lattice Boltzmann analysis

11

Influence of Erythropoietin Dose and Albumin Level on the Plasma Brain Natriuretic Peptide in Hemodialysis Patients

12

Influence of Escherichia coli hydrogenases on hydrogen fermentation from glycerol

13

Influence of esophageal carcinoma operations on gastroesophageal reflux

14

Influence of essential onion oil on tin and chromium dissolution from tinplate

15

Influence of esterification and modification of A-ring in a group of lupane acids on their cytotoxicity Original Research Article

16

Influence of estimation method of compression index on spatial distribution of consolidation settlement in Songdo New City

17

Influence of estimation procedure on soil organic carbon stock assessment in Flanders, Belgium

18

Influence of estimators of the vital rates in the stock recovery rate when using matrix models for tropical rainforests

19

Influence of estimators of the vital rates in the stock recovery rate when using matrix models for tropical rainforests

20

Influence of estradiol on adrenal activity in ovariectomized cows during acute stress

21

Influence of estradiol, progesterone, and nutrition on concentrations of gonadotropins and GnRH receptors, and abundance of mRNA for GnRH receptors and gonadotropin subunits in pituitary glands of beef cows

22

Influence of estradiol, stress, and 5-HT2A agonist treatment on Brain-Derived Neurotrophic Factor expression in female rats

23

Influence of estrogen receptor variants on the determination of ER status in human breast cancer

24

Influence of estrogen receptor variants on the determination of ER status in human breast cancer

25

Influence of estrogen therapy at conventional and high doses on the degree of mineralization of iliac bone tissue: a quantitative microradiographic analysis in postmenopausal women

26

Influence of estuarine hypoxia on feeding and sound production by two sympatric pipefish species (Syngnathidae)

27

Influence of etching conditions on apatite fission-track etch pit diameter

28

Influence of etching of polycrystalline Au-, Pt- and glassy carbon surfaces with OH radicals on electrodeposition of metals

29

Influence of ethanol addition in refinery stream fuels and the HCCI combustion

30

Influence of ethanol addition on the modification of montmorillonite by hexadecyl trimethylammonium bromide

31

Influence of ethanol and glycerol concentration over functional and structural properties of zein–oleic acid films

32

Influence of ethanol and pH on the gene expression of the citrate pathway in Oenococcus oeni Original Research Article

33

Influence of ethanol blends on the combustion performance and exhaust emission characteristics of a four-cylinder diesel engine at various engine loads and injection timings

34

Influence of ethanol dose and pigmentation on the incorporation of ethyl glucuronide into rat hair

35

Influence of ethanol in the presence of H2 on the catalytic growth of vertically aligned carbon nanotubes Original Research Article

36

Influence of ethanol on circulation in surface-induced hypothermia and subsequent rewarming

37

Influence of ethanol on lead distribution and biochemical changes in rats exposed to lead

38

Influence of ethanol on the electrocodeposition of Ni/Al2O3 nanocomposite films

39

Influence of ethanol on the high frequency electric polarizability of E. coli Original Research Article

40

Influence of ethanol on the salsolinol excretion in healthy subjects

41

Influence of ethanol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers

42

Influence of ethanol supercritical drying treatment on morphology and electrochemical properties of DyBaCo2O5+δ cathode material

43

Influence of ethanolic extract of Allium sativum on TP53 gene and its anticancer potential in N-Nitrosodiethylamine (NDEA)-induced hepatocellular carcinoma in male albino rats

44

Influence of Ethical Leadership on Innovative Work Behavior: Examination of Individual-Level Psychological Mediators

45

Influence of Ethnicity on the Incidence Rate of Oral Clefts in Northern Iran

46

Influence of ethnocentrism and neo-phobia on ethnic food consumption in Spain

47

Influence of ethoxylate chain length for synperonic NPX surfactants on the film formation behaviour of methylmethacrylate–2-ethylhexyl acrylate copolymer latexes: II. A dielectric investigation

48

Influence of ethyl xanthate on the wettability and surface free energy of galena

49

Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers

50

Influence of ethylene on carbon-catalysed decomposition of methane

51

Influence of ethylene on carotenoid biosynthesis during papaya postharvesting ripening

52

Influence of ethylene on carotenoid biosynthesis during papaya postharvesting ripening

53

Influence of ethylene-Oxy spacer group on the activity of linezolid: Synthesis of potent antibacterials possessing a thiocarbonyl group

54

Influence of ethylene–propylene ratio on the thermal degradation behaviour of EPDM elastomers

55

Influence of Etiology of Heart Failure on the Obesity Paradox

56

Influence of etiology on ventilatory expired gas and prognosis in heart failure

57

Influence of Eu doping on the microstructure and photoluminescence of CdS nanocrystals

58

Influence of Eu, Dy co-doped strontium aluminate composition on mechanoluminescence intensity

59

Influence of Eu3+ doping content on photoluminescence of Gd2O3:Eu3+ phosphors prepared by liquid-phase reaction method

60

Influence of Eu3+, Bi3+ co-doping content on photoluminescence of YVO4 red phosphors induced by ultraviolet excitation

61

Influence of Eu3+, Bi3+ co-doping content on photoluminescence of YVO4 red phosphors induced by ultraviolet excitation

62

Influence of Eucalyptus globulus plantation growth on water table levels and low flows in a small catchment

63

Influence of European passenger cars weight to exhaust CO2 emissions

64

Influence of europium nanostructure size on the emission of KBr:Eu^{2 + }

65

Influence of eutrophication on the coagulation efficiency in reservoir water

66

Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars

67

Influence of evaporation conditions for BCP and Alq3 on the performance of the PVK:Ir(ppy)3 emitting system

68

Influence of evaporation on spray flamelet structures

69

Influence of evaporation rate on cracks’ formation of a drying drop of whole blood

70

Influence of evaporation–condensation in reactive spreading Original Research Article

71

INFLUENCE OF EVAPORATIVE COOLING SYSTEM ON MICROCLIMATIC CONDITIONS OF A NURSERY SHADED GREENHOUSE

72

Influence of evolving microstructure on magnetic-hysteresis characteristics in polycrystalline nickel–zinc ferrite, Ni0.3Zn0.7Fe2O4

73

Influence of ewe feeding systems on fatty acid composition of suckling lambs

74

Influence of Exceptionally High Salinities, Marked Variations in Freshwater Discharge and Opening of Estuary Mouth on the Characteristics of the Ichthyofauna of a Normally-Closed Estuary

75

Influence of excess silicon on the surface morphology and defect structure during the initial stages of SiC sublimation growth

76

Influence of excess silicon on the surface morphology and defect structure during the initial stages of SiC sublimation growth

77

Influence of excessive filler coating on the tensile properties of LDPE–calcium carbonate composites

78

Influence of excessive sludge conditioning on the efficiency of anaerobic stabilization process and biogas generation Original Research Article

79

Influence of exchange cations on the catalytic conversion of limonene over Serra de Dentro (SD) and SAz-1 clays: Correlations between acidity and catalytic activity/selectivity Original Research Article

80

Influence of exchange distortion potential on electron impact excitation of B+

81

Influence of exchangeable cation of smectite on HDTMA adsorption: Equilibrium, kinetic and thermodynamic studies

82

Influence of exchangeable cations on hydraulic conductivity of compacted bentonite

83

Influence of exchangeable cations on the diffusion of neutral diffusants in zeolites of type LTA. An MD study

84

Influence of Excimer Behavior on Photoluminescence and Electroluminescence of a Novel Conjugated Molecule Doped in Polymer

85

Influence of excipients on characteristics and release profiles of poly(ε-caprolactone) microspheres containing immunoglobulin G

86

Influence of excipients on spray-dried powders for inhalation

87

Influence of excitation light wavelength on the photoluminescence properties for ZnO films prepared by magnetron sputtering

88

Influence of Excitation System Control Modes on the Allowable Penetration Level of Distributed Synchronous Generators

89

Influence of excitation wavelength on photoluminescence spectra of Al doped ZnO films

90

Influence of excited electron lifetimes on the electronic structure of carbon nanotubes

91

Influence of excited Landau levels on a two-dimensional electron–hole system in a strong perpendicular magnetic field

92

Influence of exciton transfer on the optical cycle of α-PTCDA

93

Influence of excluded volume on the conformational property of tail-like chain on the simple cubic lattice

94

Influence of exercise training and age on CD14+ cell-surface expression of toll-like receptor 2 and 4

95

Influence of exercise training on blood viscosity in patients with coronary artery disease and impaired left ventricular function, , ,

96

Influence of exfoliating facial cleanser on the bio-tribological properties of human skin

97

Influence of exhaled breath condensates from children with asthma on endothelial cells cultured in vitro. Do we really know everything about our breath condensate?

98

Influence of exhaust gas heating and L/D ratios on the discharge efficiencies for an activated carbon natural gas storage system

99

Influence of exhaustive treadmill exercise on cognitive functioning in chronic fatigue syndrome

100

Influence of exit opening location on mixed convection in a channel with volumetric heat sources

101

Influence of exo β-d-galactofuranosidase inhibitors in cultures of Penicillium fellutanum and modifications in hyphal cell structure Original Research Article

102

Influence of exogenic salicylic acid on Fusarium seedling blight reduction in barley

103

Influence of exogenous application of glutathione on rubisco and rubisco activase in heavy metal-stressed tobacco plant grown in vitro

104

Influence of Exogenous Application of Glycine Betaine on Growth and Ion Accumulation in Strawberry Plants under Saline Condition

105

Influence of exogenous application of some phytoprotectants on growth, yield and pod quality of snap bean under NaCl salinity

106

Influence of exogenous enzyme supplementation on energy utilisation and nutrient digestibility of cereals for broilers

107

Influence of exogenous enzymes ensiled with orange pulp on digestion and growth performance in lambs

108

Influence of exogenous enzymes on nutrient digestibility, extent of ruminal fermentation as well as milk production and composition in dairy cows

109

Influence of exogenous fibrolytic enzyme level and incubation pH on the in vitro ruminal fermentation of alfalfa stems

110

Influence of exogenous fibrolytic enzymes on in vitro and in sacco degradation of forages for ruminants

111

Influence of exogenous iron, calcium, protein and common salt on the bioaccessibility of zinc from cereals and legumes

112

Influence of exogenous organic matter on prokaryotic and eukaryotic microbiota in an agricultural soil. A multidisciplinary approach

113

Influence of exogenous organic matter on prokaryotic and eukaryotic microbiota in an agricultural soil. A multidisciplinary approach

114

Influence of exogenous polyamines on antioxidant defence and essential oil production in valerian (Valeriana officinalis L.) plants under drought stress

115

Influence of exogenous progesterone on survival of asynchronously transferred Day-10 horse embryos

116

Influence of exogenous xylanase supplementation on apparent metabolisable energy and amino acid digestibility in wheat for broiler chickens

117

Influence of exonic polymorphisms in the gene for LDL receptor-related protein (LRP) on risk of coronary artery disease

118

Influence of exopolysaccharides on the electrophoretic properties of the model cyanobacterium Synechocystis

119

Influence of expanding ring roads on traffic noise in Beijing City

120

Influence of expansion conditions on the characteristics of cholesterol crystals analyzed by statistical design

121

Influence of expansion volume of intercalated graphite on tensile properties of flexible graphite

122

Influence of Experience on the Response of Bathyplectes curculionis (Hymenoptera: Ichneumonidae), a Nonaphidophagous Parasitoid, to Aphid Odor

123

Influence of experimental conditions and Trp mutations on the stability and the folding characteristics of goat α-lactalbumin

124

Influence of experimental conditions on the extraction of phenolic compounds from parsley (Petroselinum crispum) flakes using a pressurized liquid extractor

125

Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test

126

Influence of experimental inflammatory response on hepatic hepcidin gene expression and plasma iron concentration in sheep

127

Influence of experimental inflammatory response on hepatic hepcidin gene expression and plasma iron concentration in sheep

128

Influence of experimental parameter on the Li-content of LiMn2O4 electrodes produced by pulsed laser deposition

129

Influence of experimental parameters on determination of residual stress using the incremental hole-drilling method

130

Influence of experimental parameters on physical properties of porous silicon and oxidized porous silicon layers

131

Influence of experimental parameters on the composition of precipitates in metallic alloys

132

Influence of experimental parameters on the composition of precipitates in metallic alloys

133

Influence of experimental parameters on the fluorescence response and recovery of the high-performance liquid chromatography analysis of fumonisin B1

134

Influence of experimental protocol on activation energy in char gasification: the effect of thermal annealing

135

Influence of experimental resolution on the quantum-to-classical transition in the quartic oscillator

136

Influence of experimental variables on fracture toughness determined on SEVNB in three points bending. Mullite a case study

137

Influence of experimentally elevated testosterone on nest defence in dark-eyed juncos

138

iNFLUENCE OF EXPLANT AND GROWTH REGULATORS IN THE INDUCTION OF CALLUS OF Annona Muricata IN VITRO

139

Influence of Explant Nodal Positions on the In Vitro Shoot Regeneration of Rose

140

Influence of exploitation on population structure, spatial distribution and reproductive success of dioecious species in a fragmented cloud forest in India Original Research Article

141

Influence of explorer tip diameter in identifying restoration margin discrepancies

142

Influence of explosive energy on the strength of the rock fragments and SAG mill throughput

143

Influence of exposure history on vitellogenin induction in medaka: a case of ‘estrogen memory’?

144

Influence of exposure sites on trace element enrichment in moss-bags and characterization of particles deposited on the biomonitor surface Original Research Article

145

Influence of exposure temperature on chloride diffusion in concretes incorporating silica fume or natural zeolite

146

Influence of exposure to aggressive environment on fatigue behavior of a shot peened high strength aluminum alloy

147

Influence of exposure to environmental lead on serum immunoglobulin in preschool children

148

Influence of exposure to pesticides on serum components and enzyme activities of cytotoxicity among intensive agriculture farmers

149

Influence of exposure to phosphoric and polyacrylic acids on selected microscopic and physical/chemical properties of calcium hydroxide cements

150

Influence of expressed emotion and perceived criticism on cognitive-behavioral therapy for social phobia

151

Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods

152

Influence of extended defects and native impurities on external gettering in polycrystalline silicon

153

Influence of extended defects and native impurities on external gettering in polycrystalline silicon

154

Influence of extended π-conjugation units on carrier mobilities in conducting polymers

155

Influence of Extended-Release Nicotinic Acid on Nonesterified Fatty Acid Flux in the Metabolic Syndrome With Atherogenic Dyslipidemia

156

Influence of extensive compressed natural gas (CNG) usage on air quality

157

Influence of external bias on the surface morphology of a-C:H films grown by electron cyclotron resonance chemical vapor deposition

158

Influence of external density fluctuations on parametric 3-wave interaction Original Research Article

159

Influence of external distortions on multifactor optical identification tags with photon-counting

160

Influence of external electric field on relaxor behaviour of (Pb0.75Ba0.25)(Zr0.70Ti0.30)O3 ceramics

161

Influence of external electric field on the polarity of water droplets in water-in-oil emulsion phase transition

162

Influence of external excitations on ball positioning of an automatic balancer

163

Influence of external field and consequent impurity breathing on excitation profile of doped quantum dots

164

Influence of External Fluctuations on a Hypercycle Formed by Two Kinetically Indistinguishable Species

165

Influence of external grounded screens on the electric field structure in a drift chamber

166

Influence of External Magnetic Field on 3D Thermocapillary Convective Flow in Various Thin Annular Pools Filled with Silicon Melt

167

INFLUENCE OF EXTERNAL MAGNETIC FIELD ON A SYMMETRICAL GYROTROPIC SLAB IN TERMS OF GOOS-HÄNCHEN SHIFTS

168

Influence of external perturbations on a minienvironment: experimental investigations

169

Influence of external stress and plastic strain on morphological evolution of precipitates in Ni-based superalloys

170

Influence of external transverse electric and magnetic fields on the absorption of a parabolic quantum wire

171

Influence of external β-irradiation in oxide glasses

172

Influence of external, intrinsic and individual behaviour variables on serum 25(OH)D in a German survey

173

Influence of extra terms on asymptotic analysis of imperfection sensitivity of toroidal shell segment with random imperfection

174

Influence of Extracellular Matrix Overlay on Phenobarbital-Mediated Induction of CYP2B1, 2B2, and 3A1 Genes in Primary Adult Rat Hepatocyte Culture

175

Influence of extracellular matrix proteins on human keratinocyte attachment, proliferation and transfer to a dermal wound model

176

Influence of extractant on quality and trace elements content of peat humic acids

177

Influence of extraction conditions on phenolic yields from pine bark: assessment of procyanidins polymerization degree by thiolysis

178

Influence of extraction methodology on grape composition values

179

Influence of extraction methods on stability of flavonoids

180

INFLUENCE OF EXTRACTION METHODS ON THE YIELD AND CHEMICAL COMPOSITION OF ESSENTIAL OIL OF PLATYCLADUS ORIENTALIS (L.) FRANCO

181

INFLUENCE OF EXTRACTION METHODS ON THE YIELD AND CHEMICAL COMPOSITION OF ESSENTIAL OIL OF PLATYCLADUS ORIENTALIS (L.) FRANCO.

182

Influence of extraction methods on total phenolic, flavonoids and antioxidant activity of Thymus kotchyanus L. extract in Semnan Province, Iran

183

Influence of extraction methods on total phenolic, flavonoids and antioxidant activity of Thymus kotchyanus L. extract in Semnan Province, Iran

184

Influence of extraction procedures on phenolic content and antioxidant activity of Cretan barberry herb

185

Influence of Extraction Solvents on Cosmos caudatus Leaf Antioxidant Properties

186

Influence of extraction system, production year and area on Cornicabra virgin olive oil: a study of five crop seasons

187

Influence of extraction temperature on the final quality of espresso coffee

188

Influence of extractives on mechanism of biomass pyrolysis

189

Influence of extra-framework Al on the structure of the active iron sites in Fe/ZSM-35

190

Influence of extra-framework cations on the diffusion of alkanes in silicalite: Comparison between quasi-elastic neutron scattering and molecular simulations

191

Influence of extreme head rotations on brainstem auditory evoked potentials (BAEP)

192

Influence of extruder and feedstock variables on torque requirement during pretreatment of different types of biomass – A response surface analysis

193

Influence of extrusion parameters on grain size and texture distributions of AZ31 alloy

194

Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80

195

Influence of extrusion rate and magma rheology on the growth of lava domes: Insights from particle-dynamics modeling

196

Influence of extrusion ratio and temperature on microstructure and mechanical properties of 2024 aluminium alloy consolidated from nanocrystalline alloy powders via hot hydrostatic extrusion

197

Influence of extrusion ratio and temperature on microstructure and mechanical properties of 2024 aluminium alloy consolidated from nanocrystalline alloy powders via hot hydrostatic extrusion

198

Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite

199

Influence of extrusion temperature on the microstructure and the texture of 6061Al–15 vol.% SiCw PM composites

200

Influence of extrusion variables on subsequent saccharification behaviour of sago starch

201

Influence of fabric and mineralogy on the mechanics of dolomitic rocks

202

Influence of fabric structure and thickness on the ballistic impact behavior of Ultrahigh molecular weight polyethylene composite laminate

203

Influence of Fabrication Conditions on the Electrical Behaviour of Polymer Schottky Diodes

204

Influence of fabrication parameter on the nanostructure and photoluminescence of highly doped p-porous silicon

205

Influence of Fabrication Parameters on Thermo-Mechanical Characteristics of Zea Natural Fiber Reinforced Polymer Composites

206

Influence of fabrication process on the performance of light-emitting diodes

207

Influence of fabrication processing on phase transition and electrical properties of 0.8Pb(Zr1/2Ti1/2)O3–0.2Pb(Ni1/3Nb2/3)O3 ceramics

208

Influence of fabrication processing on phase transition and electrical properties of 0.8Pb(Zr1/2Ti1/2)O3–0.2Pb(Ni1/3Nb2/3)O3 ceramics

209

Influence of fabrication stresses on fatigue life of friction stir welded aluminium profiles

210

Influence of Factors in Provision of Networked Services: An Empirical Study in India

211

Influence of factors unrelated to environmental quality on occupant satisfaction in LEED and non-LEED certified buildings

212

Influence of failure mode induced by a horizontally operated single-tip penetrometer on measured soil resistance

213

Influence of Failure Modes on PAH Emission During Lab-Scale Incineration

214

Influence of failure modes on PEFC stack and single cell performance and durability

215

Influence of Falling Height on the Behavior of Skid-Launching Free-Fall Lifeboat in Regular Waves

216

Influence of fallow, wheat and subterranean clover on pH within an initially mixed surface soil in the field

217

Influence of fallowing practices on soil water and precipitation storage efficiency in semiarid Aragon (NE Spain)

218

Influence of family disharmony and parental alcohol use on adolescent social skills, self-efficacy, and alcohol use

219

Influence of family history and lifestyle on blood pressure and heart rate in young adults in Jordan

220

INFLUENCE OF FAMILY RELATED ISSUES ON WORK LIFE BALANCE

221

Influence of Family Structure on the Mental Health and Academic Performance of In-School Adolescents

222

Influence of farm resource endowment on possibilities for sustainable development: A case study for vegetable farms in South Uruguay

223

Influence of Farmers’ Characteristics on Knowledge Gap of Recommended Sugarcane Production Technology in Khyber Pakhtunkhwa, Pakistan

224

Influence of farmers’ socio-economic and technology characteristics on soybean seeds technology adoption in Southern Borno State, Nigeria

225

Influence of farming activities in the Iberian Peninsula on the winter habitat use of common crane (Grus grus) in areas of its traditional migratory routes

226

Influence of farming and feeding systems on composition and quality of goat and sheep milk

227

Influence of farming methods on microbiological contamination and prevalence of resistance to antimicrobial drugs in isolates from beef

228

INFLUENCE OF FARMING SYSTEM, NITROGEN RATES AND METEOROLOGICAL CONDITIONS ON NAKED OAT IN LATVIA

229

Influence of farmyard manure, inorganic fertilizers and weed control practices on some soil physical properties in a long-term experiment

230

Influence of Fasciola hepatica on Serum Biochemical Parameters and Vascular and Biliary System of Sheep Liver.

231

Influence of fast charge on the life cycle of positive lead–acid battery plates

232

Influence of fast pyrolysis temperature on biochar labile fraction and short-term carbon loss in a loamy soil

233

Influence of fast secondary electrons on dipole oscillations in a neutralized electron beam

234

Influence of fast secondary electrons on dipole oscillations in a neutralized electron beam

235

Influence of fastener placement on vibration-induced loosening

236

Influence of Fasteners Disposition on Behaviour of Timber-Framed Walls with Double Fibre-Plaster Coating Boards

237

Influence of fasteners disposition on behaviour of timber-framed walls with single fibre–plaster sheathing boards

238

Influence of fast-heating processes and O atom production by a nanosecond spark discharge on the ignition of a lean –air premixed flame

239

Influence of Fasting on Functional Recovery of the Isolated Heart Exposed to Ischemia Reperfusion in Young and Aged Male Albino Rats

240

Influence of fat content on physico-chemical and oxidative stability of foal liver pâté

241

Influence of fat on the perceived texture of set acid milk gels: a sensory perspective

242

Influence of fat/carbohydrate ratio on progression of fatty liver disease and on development of osteopenia in male rats fed alcohol via total enteral nutrition (TEN)

243

Influence of fathersʹ social class on cardiovascular disease in middle-aged men

244

Influence of fatigue and aggressive exposure on GFRP girder to SFRSCC deck all-adhesive connection

245

Influence of fatigue load range on the growth of a microstructurally short edge crack simulated by a discrete dislocation formulation

246

Influence of fatigue, depression, and demographic, socioeconomic, and clinical variables on quality of life of patients with epilepsy

247

Influence of fatty acid chain length and cis/trans isomerization on postprandial lipemia and factor VII in healthy subjects (postprandial lipids and factor VII)

248

Influence of fatty acid composition of raw materials on biodiesel properties

249

Influence of fatty acid composition of woody biodiesel plants on the fuel properties

250

Influence of fatty acid composition on chemical changes in blends of sunflower oils during thermoxidation and frying

251

Influence of fatty acid methyl esters from hydroxylated vegetable oils on diesel fuel lubricity

252

Influence of fatty acid unsaturation degree over exhaust and noise emissions through biodiesel combustion

253

Influence of fatty alcohol antifoam suspensions on foam stability

254

Influence of fault arc characteristics on the accuracy of digital fault locators

255

Influence of Fault Current Limiter in Voltage dro‎p and TRV Considering Wind Farm

256

Influence of fault process zone on ground shaking of inland earthquakes: Verification of Mj = 7.3 Western Tottori Prefecture and Mj = 7.0 West Off Fukuoka Prefecture earthquakes, southwest Japan

257

Influence of FCA Welding Process Parameters on Distortion of 409M Stainless Steel for Rail Coach Building Original Research Article

258

Influence of FCC catalyst steaming on HDPE pyrolysis product distribution

259

Influence of FCC catalyst steaming on HDPE pyrolysis product distribution

260

Influence of F-doping on the transmittance and electron affinity of CdO thin films suitable for solar cells technology

261

Influence of Fe addition on glassy stability of an Al85Ni5Y8Co2 metallic glass with a large supercooled liquid region

262

Influence of Fe addition on hydrogen storage characteristics of Ti–V-based alloy

263

Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl

264

Influence of Fe and Ni on creep of near α-Ti alloy IMI834

265

Influence of Fe and Ni on creep of near α-Ti alloy IMI834

266

Influence of Fe contamination and temperature on mechanically alloyed Co–Ni–Mo electrodes for hydrogen evolution reaction in alkaline water

267

Influence of Fe content and particle size the on the processing and mechanical properties of low-cost Ti–xFe alloys

268

Influence of Fe Content on Microstructure and Magnetic Properties of Melt-Spun SmCo-Based Alloy Ribbons Original Research Article

269

Influence of Fe content on the microstructure and hydrogen storage properties of Ti16Zr5Cr22V57−xFex (x = 2–8) alloys

270

Influence of Fe content on the structural and optical properties of ZnFeS thin films

271

Influence of Fe doping on nanostructures and photoluminescence of sol–gel derived ZnO

272

Influence of Fe doping on the electrical properties of Sr2MgMoO6−δ

273

Influence of Fe doping on the structural, optical and acetone sensing properties of sprayed ZnO thin films

274

Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings

275

Influence of Fe ions in characteristics and optical properties of mesoporous titanium oxide thin films

276

Influence of Fe nanoparticles diameters on the structure and electron emission studies of carbon nanotubes and multilayer graphene

277

Influence of Fe on the room and high-temperature sliding wear of NiAl coatings

278

Influence of Fe substitutions on the deformation behavior and fault energies of Ni3Ge–Fe3Ge L12 intermetallic alloys Original Research Article

279

Influence of Fe/Ba ratio, basic agent and calcination temperature on the physical properties of nanocrystalline barium hexaferrite thin films prepared by a sol–gel method

280

Influence of Fe2O3 content on the dielectric behavior of aluminous porcelain insulators

281

Influence of Fe2O3 on alloying and magnetic properties of Fe–Al

282

Influence of Fe3+ and Ho3+ co-doping on the photocatalytic activity of TiO2

283

Influence of Fe3+-doping on optical properties of CeO2−y nanopowders

284

Influence of Fe-additives on the microstructure and mechanical properties of vacuum copper condensates

285

Influence of Fear of Falling Severity Measured by Falls Efficacy Scale-International on Gait and Balance Performance After Chronic Stroke

286

Influence of Feed Additives in Quality of Broiler Carcasses

287

Influence of feed characteristics on the microwave-assisted pyrolysis used to produce syngas from biomass wastes

288

Influence of feed characteristics on the microwave-assisted pyrolysis used to produce syngas from biomass wastes

289

Influence of feed components on the activity and stability of cobalt molybdenum alumina metathesis catalyst Original Research Article

290

Influence of feed concentration and transmembrane pressure on membrane fouling and effect of hydraulic flushing on the performance of ultrafiltration Original Research Article

291

Influence of feed concentration on the accuracy of permeate flux decline prediction in ultrafiltration Original Research Article

292

Influence of feed contaminated with seeds of cleavers (Galium aparine) on the health and production traits in broiler chickens

293

Influence of feed form and conditioning temperature on performance, apparent metabolisable energy and ileal digestibility of starch and nitrogen in broiler starters fed wheat-based diet

294

Influence of Feed Impurity on the Design and Operation of an Industrial Acetic Acid Dehydration Column

295

Influence of feed motion features on small holes drilling process

296

Influence of feed properties and reaction conditions on catalytic pyrolysis of gas oils and heavy oils

297

Influence of Feed Supplementation with Cannabis Sativa on Quality of Broilers Carcass

298

Influence of feed time and sulfate load on the organic and sulfate removal in an ASBR

299

Influence of Feed Withdrawal for Three Hour Time Period on Growth Performance and Carcass Parameters of Later Stage of Male Broiler Chickens

300

Influence of feeding a milk replacer deficient in -linolenic acid on fatty acid composition of various tissues in goat kids

301

Influence of feeding a milk replacer deficient in (alpha)-linolenic acid on fatty acid composition of various tissues in goat kids

302

Influence of feeding bee colonies on colony strenght and honey authenticity

303

Influence of feeding complete dry diets mixed with water on production traits and health status of blue foxes (Alopex lagopus)

304

Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties

305

Influence of Feeding Diets Containing Dried Vegetable Fat Blend on the Performance of Broilers

306

Influence of feeding free lysine to early lactation dairy cows on ruminal lysine escape, rumen fermentation and productivity

307

Influence of feeding increasing levels of leucaena leaf meal on the performance of milch goats and metabolism of mimosine and 3-hydroxy-4 (1H) pyridone

308

Influence of feeding intensity, grazing and finishing feeding on meat and eating quality of young bulls and the relationship between muscle fibre characteristics, fibre fragmentation and meat tenderness

309

Influence of feeding intensity, grazing and finishing feeding on muscle fibre characteristics and meat colour of semitendinosus, longissimus dorsi and supraspinatus muscles of young bulls

310

INFLUENCE OF FEEDING OF FRIESIAN CALVES ON COW S MILK ON MEAT AND FAT QUALITIES AND SOME COOKING PROPERTIES

311

Influence of Feeding Processed Pigeon Pea (Cajanus cajan) Seeds on Broiler Chick Performance

312

Influence of feeding ratio on steam gasification of palm shells in a rotary kiln pilot plant. Experimental and numerical investigations

313

Influence of feeding regimens on rat gut fluids and colonic metabolism of diclofenac-β-cyclodextrin

314

Influence of feeding systems on cortisol levels, fat colour and instrumental meat quality in light lambs

315

Influence of feeding various phosphorus sources on apparent digestibility of phosphorus in dairy cows

316

Influence of feeding vitamin D3 and aging on the tenderness of four lamb muscles

317

Influence of feedstock chemical composition on product formation and characteristics derived from the hydrothermal carbonization of mixed feedstocks

318

Influence of feedstock powder characteristics and spray processes on microstructure and properties of WC–(W,Cr)2C–Ni hardmetal coatings

319

Influence of feedstock preparation on ceramic injection molding and microstructural features of zirconia toughened alumina

320

Influence of feedstock source on the biocatalyst stability and reactor performance in continuous biodiesel production

321

Influence of female age, sperm senescence and multiple mating on sperm viability in female Drosophila melanogaster

322

Influence of female nutritional status on mating dynamics in a sexually cannibalistic praying mantid

323

Influence of femoral anteversion on proximal femoral loading: measurement and simulation in four patients

324

Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement

325

Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface

326

Influence of femtolaser notch sharpening technique in the determination of essential work of fracture (EWF) parameters

327

Influence of femtosecond laser marking on the corrosion resistance of stainless steels

328

Influence of fenceline bull exposure on duration of postpartum anoestrus and pregnancy rate in beef cows

329

Influence of FeO and H on the electrical conductivity of olivine

330

Influence of fermentation by-products on the purification of ethanol from water using pervaporation

331

Influence of fermentation concentrate of Hericium caput-medusae (Bull.:Fr.) Pers. on performance, antioxidant status, and meat quality in broilers

332

Influence of fermentation on some quality characteristics of trifoliate yam (Dioscorea dumetorum) hardened tubers

333

Influence of fermentation temperature on volatile thiols concentrations in Sauvignon blanc wines

334

Influence of fermentation time on the development of compounds responsible for quality in black tea

335

Influence of ferric chloride treated Leucaena leucocephala on metabolism of mimosine and 3-hydroxy 4(1H)-pyridone in growing rabbits

336

Influence of ferric oxyhydroxide addition on biomethanation of waste activated sludge in a continuous reactor

337

Influence of ferrite and pearlite content on mechanical properties of ductile cast irons

338

Influence of ferrite fraction within martensite matrix on fatigue crack propagation: An experimental verification with dual phase steel

339

Influence of ferrocene addition on the morphology and structure of carbon from petroleum residue Original Research Article

340

Influence of ferrocene/benzene mole ratio on the synthesis of carbon nanostructures

341

Influence of ferroelectric polarization on the energetics of the reaction of 2-fluoroethanol on BaTiO3

342

Influence of ferrous ions on extracellular polymeric substances content and sludge dewaterability during bioleaching

343

Influence of Ferrous Iron and pH on Carbon Tetrachloride Degradation by Methanosarcina thermophila

344

INFLUENCE OF FERTILIZATION ON GROWTH AND QUALITY OF LETTUCE

345

INFLUENCE OF FERTILIZATION ON, MITE INFESTATION IN SOME EGGPLANT CULTIVARS, AND THEIR CHARACTERS

346

INFLUENCE OF FERTILIZATION UPON FORAGE QUALITY ON A PERMANENT GRASSLAND OF AGROSTIS CAPILLARIS L. – FESTUCA RUBRA L.

347

Influence of fertilizer management and water regime on methane emission from rice fields

348

Influence of fertilizer types and placement methods on the yield of white yam Dioscorea rotundata

349

Influence of Ferula assa-foetida Loaded Chitosan Nanoparticle Biofilm on Wound Healing in Full-Thickness Wounds Infected with Methicillin Resistant Staphylococcus aureus

350

Influence of FeSO4 concentration on thermal emissivity of coatings formed on titanium alloy by micro-arc oxidation

351

Influence of fiber alignment on creep in directionally solidified NiAl–10Mo in-situ composites

352

Influence of fiber and grain bridging on crack profiles in SiC fiber-reinforced alumina-matrix composites

353

Influence of fiber and grain bridging on crack profiles in SiC fiber-reinforced alumina-matrix composites

354

INFLUENCE OF FIBER ASPECT RATIO ON SHEAR CAPACITY OF DEEP BEAMS USING ARTIFICIAL NEURAL NETWORK TECHNIQUE

355

Influence of fiber bridging on structural size-effect

356

Influence of fiber chemical coating on the acoustic emission behavior of steel fiber reinforced concrete

357

Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites

358

Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites

359

Influence of fiber coating thickness on microstructure and mechanical properties of carbon fiber-reinforced zirconium diboride based composites

360

Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites

361

Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites

362

Influence of fiber content on the structure and properties of short carbon fiber reinforced carbon foam

363

Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates

364

Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates

365

Influence of fiber fermentability on nutrient digestion in the dog

366

Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature

367

Influence of fiber orientation and matrix processing on the tensile and creep performance of Nextel 610 reinforced polymer derived ceramic matrix composites

368

Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete

369

Influence of fiber orientation on abrasive wear of unidirectionally reinforced carbon fiber–polyetherimide composites

370

Influence of fiber orientation on global mechanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlation

371

Influence of fiber reinforcement on strength and toughness of all-lightweight concrete

372

Influence of fiber structure modification on the mechanical properties of flax fiber-epoxy composites

373

Influence of fiber surface treatment on properties of Indian grass fiber reinforced soy protein based biocomposites

374

Influence of fiber surface-treatment on interfacial property of poly(l-lactic acid)/ramie fabric biocomposites under UV-irradiation hydrothermal aging

375

Influence of Fiber Undulations on Buckling of Thin Filament-Wound Cylinders in Axial Compression

376

Influence of fiber volume fraction on mode III interlaminar fracture toughness of glass/epoxy composites

377

Influence of fiber waviness on the effective properties of discontinuous fiber reinforced composites

378

Influence of fiber’s shape and size on overall elastoplastic property for micropolar composites

379

Influence of fiber–matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites

380

Influence of Fiber-Reinforced Concrete on Radon Concentrations

381

Influence of fibers and solid lubricants on low amplitude oscillating wear of polyetherimide composites

382

Influence of fibers on flexural behavior and ductility of concrete beams reinforced with GFRP rebars

383

Influence of fibre coating in headspace solid-phase microextraction–gas chromatographic analysis of aromatic and medicinal plants

384

Influence of fibre distribution on the transverse flow permeability in fibre bundles

385

Influence of fibre distribution on the transverse flow permeability in fibre bundles

386

Influence of fibre from different cereals on the rheological characteristics of wheat flour dough and on biscuit quality

387

Influence of fibre geometry and matrix maturity on the mechanical performance of ultra high-performance cement-based composites

388

Influence of fibre length and opening roller speed on physical properties of OE rotor-spun viscose yarns

389

Influence of fibre length and opening roller speed on physical properties of OE rotor-spun viscose yarns

390

Influence of Fibre Length on the Behaviour of Polypropylene Fibre Reinforced Cement Concrete

391

Influence of Fibre Length, Dissolution and Biopersistence on the Production of Mesothelioma in the Rat Peritoneal Cavity

392

Influence of Fibre Length, Dissolution and Biopersistence on the Production of Mesothelioma in the Rat Peritoneal Cavity

393

Influence of fibre orientation and stacking sequence on petalling of glass/polyester composite cylindrical shells under axial compression

394

Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester composite

395

Influence of fibre properties on the mechanical behaviour of unidirectionally-reinforced ceramic matrix composites

396

Influence of fibre properties on the mechanical behaviour of unidirectionally-reinforced ceramic matrix composites

397

Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surfaces

398

Influence of fibre reinforcement on the aging behaviour of an AlSi12CuMgNi alloy

399

Influence of fibre reinforcement on the aging behaviour of an AlSi12CuMgNi alloy

400

Influence of fibre treatments on mechanical properties of short Sansevieria cylindrica/polyester composites

401

Influence of fibre type on flexural behaviour of self-compacting fibre reinforced cementitious composites

402

Influence of fibre volume fraction on mode II interlaminar fracture toughness of glass/epoxy using the 4ENF specimen

403

Influence of fibre–matrix interface on the fracture behaviour of carbon-carbon composites

404

Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute

405

Influence of fibrin glue on seroma formation after breast surgery

406

Influence of fibrin sealant (Tisseel®) on osteochondral defect repair in the rabbit knee

407

Influence of Fibroblast Growth Factor (bFGF) and Insulin-like Growth Factor (IGF-I) on Cytoskeletal and Contractile Structures and on Atrial Natriuretic Factor (ANF) Expression in Adult Rat Ventricular Cardiomyocytes in Culture

408

Influence of fibrolytic enzymes on ruminal disappearance and fermentation in steers fed diets with short and long particle length of forage

409

Influence of fibrolytic enzymes on the hydrolysis and fermentation of pure cellulose and xylan by mixed ruminal microorganisms in vitro

410

Influence of Fibrolytic Enzymes on the in vitro Hydrolysis and Fermentation of Different Types of Roughages Treatment

411

Influence of fibrous additives on properties of aerated autoclaved concrete forming mixtures and strength characteristics of products

412

Influence of fibrous feed ingredients on voluntary intake of dry sows

413

Influence of field burning and soil treatments on growth of wheat after Kentucky bluegrass, and effect of Rhizoctonia cerealis on bluegrass emergence and growth

414

Influence of field evaporation treatment on the field emission properties of carbon nanotubes array

415

Influence of field margins and landscape context on ground beetle diversity in Wisconsin (USA) potato fields

416

Influence of field-effect charges on the optical properties of α-sexithiophene thin films

417

Influence of figure skating skates on vertical jumping performance

418

Influence of filament thickness, thermal process and magnetic field on misalignment angles in multifilament Bi2212 tapes Original Research Article

419

Influence of fill factor variation in high shear granulation on the post granulation processes: Compression and tablet properties

420

Influence of filler addition to bonding agents on shear bond strength to bovine dentin

421

Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits

422

Influence of filler dispersion on thin film composites sensing properties

423

Influence of filler distribution on the color parameters of experimental resin composites

424

Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites

425

Influence of filler parameters on the mechanical coherence of dental restorative resin composites

426

Influence of filler particles on deformation and fracture mechanism of isotactic polypropylene

427

Influence of filler size and morphology in controlling the thermal emissivity of aluminium/polymer composites for space applications

428

Influence of filler type on the performance and microstructure of a carbon/graphite material

429

Influence of filler type on the performance and microstructure of a carbon/graphite material

430

Influence of filler type on the properties of foam concrete

431

Influence of filler type on wet skid resistance of SSBR/BR composites: Effects from roughness and micro-hardness of rubber surface

432

Influence of filler wire composition on weld microstructures of a 444 ferritic stainless steel grade

433

Influence of fillers and additives on the cure kinetics of an epoxy/anhydride resin

434

Influence of fillers on free volume and gas barrier properties in styrene-butadiene rubber studied by positrons

435

Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas

436

Influence of fillers on NR/SBR/XNBR blends. Morphology and wear

437

Influence of fillers on the low amplitude oscillating wear behaviour of polyamide 11

438

Influence of filling conditions on product quality and machine parameters in fermented coarse meat emulsions produced by high shear grinding and vacuum filling Original Research Article

439

Influence of filling techniques on shrinkage stress in dental composite restorations

440

Influence of filling–drawdown cycles of the Vajont reservoir on Mt. Toc slope stability

441

Influence of film and modified atmosphere on sensory quality of roasted apple cv. Reineta

442

Influence of film morphology on the vibrational spectra of dioctyl substituted polyfluorene (PFO)

443

Influence of film preparation procedures on the crystallinity, morphology and mechanical properties of LLDPE films

444

Influence of film processing conditions on the morphology of polyamide 6: Consequences on water and ethanol sorption properties

445

Influence of film qualities on noise characteristics of a-Si1−xCx:H thin films deposited by PECVD

446

Influence of film structure and composition on diffusion barrier performance of SiOx thin films deposited by PECVD

447

Influence of film structure on gas barrier properties of SiOxNy films

448

Influence of film structure on the surface vibrations of Co/Au(111)

449

Influence of film structure on the surface vibrations of Co/Au(lll)

450

Influence of film thickness and cross-sectional geometry on hydrophilic microchannel condensation

451

Influence of film thickness on in vitro bioactivity of thin anatase films produced through direct deposition from an aqueous titanium tetrafluoride solution

452

Influence of film thickness on joint bend strength of a ceramic/resin composite joint

453

Influence of film thickness on the molecular arrangement of copper phthalocyanine on hydrogen-terminated Si(111)

454

Influence of film thickness on the structure and properties of PDMS membrane

455

Influence of filter ventilation on the chemical composition of cigarette mainstream smoke Original Research Article

456

Influence of filtering of cold pressed berry seed oils on their antioxidant profile and quality characteristics

457

Influence of filtration conditions on the performance of nanofiltration and reverse osmosis membranes in dairy wastewater treatment Original Research Article

458

Influence of filtration on concentrations of 62 elements analysed on crystalline bedrock groundwater samples by ICP-MS

459

Influence of filtration on volatile compounds and sensory profile of virgin olive oils

460

Influence of filtration superficial velocity on cake compression and cake formation

461

Influence of filtration, preservation and storing on the analysis of low molecular weight organic acids in natural waters

462

Influence of Final Apical Width on Smear Layer Removal Efficacy of Xp Endo Finisher and Endodontic Needle: An Ex Vivo Study

463

Influence of financial productivity incentives on the use of preventive care

464

Influence of fine aggregate characteristics on the rheological properties of mortars

465

Influence of fine particles on grain coarsening within an orientation gradient

466

Influence of fine particles on grain coarsening within an orientation gradient Original Research Article

467

Influence of fine tailings on polyester mortar properties

468

Influence of Finely Dispersed Carbon Nanotubes on the Performance Characteristics of Polymer Electrolytes for Lithium Batteries

469

Influence of finely ground limestone on cement hydration

470

Influence of finely ground limestone on cement hydration

471

Influence of fineness of fly ash on the aggregate pelletization process

472

Influence of fineness of rice husk ash and additives on the properties of lightweight aggregate

473

Influence of finishing coatings on hygroscopic moisture buffering in building elements

474

Influence of Finishing Cooling Temperature and Holding Time on Nanometer-size Carbide of Nb-Ti Microalloyed Steel Original Research Article

475

Influence of finishing systems on hydrophilic and lipophilic oxygen radical absorbance capacity (ORAC) in beef

476

Influence of Finite Absorption of Radionuclides on Radionuclide Migration in an Engineered Barrier System

477

Influence of Finite Absorption of Radionuclides on Radionuclide Migration in an Engineered Barrier System

478

Influence of Finite Amplitude Disturbances on the Nonstationary Modes of a Compressible Boundary Layer Flow

479

Influence of finite ground conductivity on the fields of a vertical traveling wave of current

480

Influence of finite heat capacity of solid pins and their spacing on thermoacoustic performance of transverse-pin stacks

481

Influence of finite notch root radius and optically determined crack length on the measured fracture toughness of brittle materials

482

Influence of finite size effect on magnetic and magnetotransport properties of thin films

483

Influence of finite spectral width on the interference spectra of a thin absorbing film on a transparent substrate

484

Influence of fins on formaldehyde removal in annular photocatalytic reactors

485

Influence of fipronil compounds and rice-cultivation land-use intensity on macroinvertebrate communities in streams of southwestern Louisiana, USA

486

Influence of FIR irradiation on paddy moisture reduction and milling quality after fluidized bed drying Original Research Article

487

Influence of fire ignition locations on the actuation of smoke detectors and wet-type sprinklers in a furnished office

488

Influence of fire on native nitrogen-fixing plants and soil nitrogen status in ponderosa pine - Douglas-fir forests in western Montana

489

Influence of fire source locations on the actuation of wet-type sprinklers in an office fire

490

Influence of firing conditions on ceramic products: Experimental study on clay rich in organic matter

491

Influence of firing parameters on phase composition of raw glazes

492

Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies

493

Influence of firing temperature on frost resistance of roofing tiles

494

Influence of firing temperature on interface adhesion between screen-printed Ag film and BaTiO3 substrate

495

Influence of firing temperature on interface adhesion between screen-printed Ag film and BaTiO3 substrate

496

Influence of firing temperature on mechanical properties on roofing tiles

497

Influence of firing temperature on the ceramic properties of clays from Campos dos Goytacazes, Brazil

498

Influence of firing temperature on the ceramic properties of Triassic clays from Tunisia

499

Influence of firing temperature on the color developed by a (Zr,V)SiO4 pigmented opaque ceramic glaze

500

Influence of firing time and framework thickness on veneered Y-TZP discs curvature

501

Influence of fission products on ruthenium oxidation and transport in air ingress nuclear accidents

502

Influence of FK506 on experimental atherosclerosis in cholesterol-fed rabbits Original Research Article

503

Influence of flake fragmentation on the feeding value of steam-flaked corn in finishing diets for feedlot cattle

504

INFLUENCE OF FLAKE SIZE ON THE MORPHOLOGY OF WET SPUN GRAPHENE OXIDE FIBERS

505

Influence of flame conditions on the dispersion of Pd on the flame spray-derived Pd/TiO2 nanoparticles

506

Influence of flame retardants on the mechanism of pyrolysis of cotton (cellulose) fabrics in air

507

Influence of flanking sequences on signaling between the activation function AF1 and DNA-binding domain of the glucocorticoid receptor

508

Influence of flash design upon process parameters of hot die forging

509

Influence of flash temperatures on the tribological behaviour in low-speed sliding: a review

510

Influence of flash temperatures on the tribological behaviour in low-speed sliding: a review

511

Influence of flat and bed sowing methods on growth and yield parameters of wheat in rice-wheat cropping system

512

Influence of flavan-3-ols and procyanidins on UVC-mediated formation of 8-oxo-7,8-dihydro-2′-deoxyguanosine in isolated DNA

513

Influence of flavonoids from Phellinus igniarius on sturgeon caviar: Antioxidant effects and sensory characteristics

514

Influence of Flavonols As in vitro on Low Density Lipoprotein Glycation

515

Influence of Flavor Variability in Skim Milk Powder on Consumer Acceptability of Ingredient Applications

516

Influence of flavour transfer between different gel phases on perceived aroma

517

Influence of flaw inclination angle and loading condition on crack initiation and propagation

518

Influence of flaws and crystal properties on particle fracture in a jet mill

519

Influence of flesh colour, year and growing area on carotenoid and anthocyanin content in potato tubers

520

Influence of flesh colour, year and growing area on carotenoid and anthocyanin content in potato tubers

521

Influence of Flipped Classroom Method on Nursing Students #x2019; Learning Approaches

522

Influence of float and charge voltage adjustment on the service life of AGM VRLA batteries depending on the conditions of use

523

Influence of flocculant molecular weight and anionic charge on flocculation behaviour and on the manufacture of fibre cement composites by the

524

Influence of flocculants on the filtration of copper concentrates with a ceramic capillary filter

525

Influence of Flocculating Agents and Structural Vehicles on the Physical Stability and Rheological Behavior of Nitrofurantoin Suspension

526

Influence of flocs breakage process on submerged ultrafiltration membrane fouling

527

Influence of flood depth and duration on growth of lowland rice weeds, Cote d’Ivoire

528

Influence of Flooding Intensity and Duration on Rice Growth and Yield

529

Influence of flooding, salinity and inundation time on the bioavailability of metals in wetlands

530

Influence of floor motions in wind tunnels on the aerodynamics of road vehicles

531

Influence of floral assemblage, facies and diagenesis on petrography and organic geochemistry of the Eocene Bourgas coal and the Miocene Maritza-East lignite (Bulgaria)

532

Influence of floral resource plants on control of an armored scale pest by the parasitoid Encarsia citrina (Craw.) (Hymenoptera: Aphelinidae)

533

Influence of flour blend composition on fermentation kinetics and phytate hydrolysis of sourdough used to make injera

534

Influence of flow channel insert with pressure equalization opening on MHD flows in a rectangular duct

535

Influence of flow concentration on parameter importance and prediction uncertainty of pesticide trapping by vegetative filter strips

536

Influence of flow conditions on the corrosion of AISI 304L stainless steel

537

Influence of flow direction and flow rate on the initial adhesion of seven Listeria monocytogenes strains to fine polished stainless steel

538

Influence of flow field design on the performance of a direct methanol fuel cell

539

Influence of flow field on sedimentation efficiency in a circular settling tank with peripheral inflow and central effluent

540

Influence of flow injection angle on a leading-edge horseshoe vortex

541

Influence of flow patterns on chromatographic efficiency in centrifugal partition chromatography

542

Influence of flow properties on a structure of a mineral wool primary layer

543

Influence of flow regime and thermal power on residence time distribution in tubular Joule Effect Heaters Original Research Article

544

INFLUENCE OF FLOW REGIME ON THE CONCENTRATION OF CYANIDE PRODUCING ANAEROBIC PROCESS INHIBITION

545

INFLUENCE OF FLOW REGIME ON THE CONCENTRATION OF CYANIDE PRODUCING ANAEROBIC PROCESS INHIBITION

546

Influence of flow restriction on the microstructure and mechanical properties of long glass fiber-reinforced polyamide 6.6 composites for automotive applications

547

Influence of flow with separation on the statistical characteristics of vibrations of the profile a compressor cascade

548

Influence of flowing sodium on creep deformation and rupture behaviour of 316L(N) austenitic stainless steel

549

Influence of flow-through and renewal exposures on the toxicity of copper to rainbow trout

550

Influence of fluctuating thermal and mass diffusion on unsteady MHD buoyancy-driven convection past a vertical surface with chemical reaction and Soret effects

551

INFLUENCE OF FLUCTUATIONS OF THE GEOMETRICAL PARAMETERS ON THE PHOTONIC BAND GAPS IN ONE-DIMENSIONAL PHOTONIC CRYSTALS

552

Influence of flue gas conditioning on fly ash characteristics

553

Influence of flue-gas desulfurization systems on coal combustion by-product quality at kentucky power stations burning high-sulfur coal

554

Influence of Fluid Balance on Morbidity and Mortality in Critically Ill Patients With Acute Kidney Injury

555

Influence of fluid circulation on in vitro reactivity of bioactive glass particles

556

Influence of fluid rotation on the heat transfer and pressure drop in double-pipe heat exchangers

557

Influence of fluidized sand bed heat treatment on the performance of Al–Si cast alloys

558

Influence of fluids and magma on earthquakes: seismological evidence

559

Influence of fluids on deep crustal Jabalpur earthquake of 21, May 1997: Geophysical evidences

560

Influence of flumequine and oxytetracycline on the resistance of the European eel against the parasitic swimbladder nematode Anguillicola crassus

561

Influence of flumequine and oxytetracycline on the resistance of the European eel against the parasitic swimbladder nematode Anguillicola crassus

562

Influence of flumequine on in vivo mitogen responses of European eel (Anguilla anguilla L., 1758) lymphoid cells

563

Influence of flumequine on in vivo mitogen responses of European eel (Anguilla anguilla L., 1758) lymphoid cells

564

Influence of fluorapatite on the properties of thermally sprayed hydroxyapatite coatings

565

Influence of fluorescence reabsorption and trapping on solid-state optical cooling

566

Influence of fluorescent dye on mechanical properties of adhesive systems

567

Influence of fluorescent whitening agent on the fluorescent emission of resin composites

568

Influence of fluorescer concentration on peroxyoxalate chemiluminescence spectra

569

Influence of fluoridated mouthwashes on corrosion resistance of orthodontics wires

570

Influence of Fluoride Addition on Hydroxyapatite Prepared for Medical Applications

571

Influence of fluoride additions on biological and mechanical properties of Na2O–CaO–SiO2–P2O5 glass–ceramics

572

Influence of fluoride and chloride on corrosion behavior of NiTi orthodontic wires

573

Influence of fluoride co-cystallized with sugar on caries development in desalivated rats

574

Influence of fluoride concentration and ethanol pre-treatment on the reduction of the acid susceptibility of enamel

575

Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys

576

Influence of fluoride ions on corrosion performance of 316L stainless steel as bipolar plate material in simulated PEMFC anode environments

577

Influence of fluoride ions on the amorphous phosphating of aluminium alloys

578

Influence of fluoride on f–f transitions of Eu3+ in LiEuM2O8 (M=Mo, W)

579

Influence of fluoride, hydrogen peroxide and lactic acid on the corrosion resistance of commercially pure titanium

580

Influence of fluorides on phase transition of α-Al2O3 formation

581

Influence of fluorinated acids bonding on surface properties of crosslinked epoxy-based polymers

582

Influence of fluorinated and hydrogenated nanoparticles on the structure and fibrillogenesis of amyloid beta-peptide Original Research Article

583

Influence of fluorine content on the crystallization and microstructure of barium fluorphlogopite glass-ceramics

584

Influence of fluorine doping on SiOxFy films prepared from a TEOS/O2/CF4 mixture using a plasma enhanced chemical vapor deposition system

585

Influence of fluorine in the synthesis of apatites. Synthesis of solid solutions of hydroxy-fluorapatite

586

Influence of fluorine on the solubility of manganotantalite (MnTa2O6) and manganocolumbite (MnNb2O6) in granitic melts — An experimental study

587

Influence of fluorine substitution on the electrochemical performance of 3 V spinel Li4Mn5O12 − ηFη cathodes

588

Influence of fluorine substitution on the morphology and structure of hydroxyapatite nanocrystals prepared by hydrothermal method

589

Influence of fluorine-based additive content on the physical and physicochemical properties of ski gliding wax

590

Influence of fluorine-containing lubricant on properties of NR/BR rubber

591

Influence of fluorite on the Ba-bearing sulphoaluminate cement

592

Influence of fluorite on the isothermal leaching and rheological behaviours of chlorite mineral pulps at low pH

593

Influence of fluoroalkanes on the phase behaviour of methane gas hydrate systems

594

Influence of fluorooxidizers on scintillation properties of fluorohafnate glass doped with Ce3+

595

Influence of fluorosurfactants on the codeposition of ceramic nanoparticles and the morphology of electroless NiP coatings

596

Influence of fluvial processes on the Quaternary geologic framework of the continental shelf, North Carolina, USA

597

Influence of fly ash and curing on cracking behavior of concrete by acoustic emission technique

598

Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortars

599

Influence of fly ash and silica fume on the consistency retention and compressive strength of concrete subjected to prolonged agitating

600

Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar

601

Influence of fly ash fineness on the chloride penetration of concrete

602

Influence of fly ash on corrosion resistance and chloride ion permeability of concrete

603

Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete

604

Influence of fly ash on strength behavior of typical soils

605

Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes

606

Influence of fO2 and cooling rate on the kinetics and energetics of Fe-rich basalt crystallization

607

Influence of foaming agent on wear and mechanical properties of surface modified rice husk filled polyvinylchloride

608

Influence of Focal Mechanism in Probabilistic Seismic Hazard Analysis

609

Influence of fodder crop rotations on the potential weed flora in the irrigated lowlands of Lombardy, Italy

610

Influence of Folding on Hydrocarbon Generation: an Example from the Dezful Embayment

611

Influence of foliage from different accessions of the sub-tropical leguminous tree, Sesbania sesban, on ruminal protozoa in Ethiopian and Scottish sheep

612

Influence of foliage on radio path losses (PLs) for wireless sensor network (WSN) planning in orchards

613

Influence of Foliar and Soil application of Humic Acid on Growth and Yield of Lettuce

614

Influence of Foliar Application of Osmoprotectants to Ameliorate Salt Stress in Sunflower (Helianthus annuus L.)

615

Influence of foliar application of salicylic acid and soil application of humic materials on cucumber and chickpea grown on a nutrient deficient soil

616

Influence of Foliar Applied GABA on Growth and Yield Contributing Characters of White Gourd (Benincasa hispida)

617

Influence of foliar density profile on canopy flow: A large-eddy simulation study

618

INFLUENCE OF FOLIAR FERMENTED PLANT INFUSIONS ON ORGANICALLY GROWN BLACKBERRY

619

Influence of foliar phosphorus and nitrogen contents on chemical properties of water extractable organic matter derived from fresh and decomposed sugar maple leaves

620

Influence of foliar phosphorus and nitrogen contents on chemical properties of water extractable organic matter derived from fresh and decomposed sugar maple leaves

621

Influence of Follicular Fluid and Seminal Plasma on The Expression of Endometrial Receptivity Genes in Endometrial Cells

622

Influence of follow-up methodology and completeness on apparent clinical outcome of fundoplication

623

Influence of food abundance on competitive aggression in juvenile convict cichlids

624

Influence of food availability, predator density and forest fragmentation on nest survival of New Zealand robins Original Research Article

625

Influence of food colorant and initial COD concentration on the efficiencies of micro-aerobic sequencing batch reactor (micro-aerobic SBR) for casein recovery under non-sterile condition by Lactobacillus casei TISTR 1500

626

Influence of food composition on splanchnic blood flow during digestion in unsedated normal dogs: a Doppler study

627

Influence of food intake on plasma LH concentrations in multiparous sows

628

Influence of food on the assimilation of selected metals in tropical bivalves from the New Caledonia lagoon: Qualitative and quantitative aspects

629

Influence of food preservation parameters and associated microbiota on production rate, profile and stability of acylated homoserine lactones from food-derived Enterobacteriaceae

630

Influence of food processing environments on structure initiation of static biofilm of Listeria monocytogenes

631

Influence of food quality on egg production and viability of the marine planktonic copepod Acartia omorii

632

Influence of food soiling matrix on cleaning and disinfection efficiency on surface attached Listeria monocytogenes

633

Influence of food supply and a potential predator (Crangon crangon) on settling behaviour of plaice (Pleuronectes platessa)

634

Influence of food system conditions on N-acyl-l-homoserine lactones production by Aeromonas spp.

635

Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials

636

Influence of footwear midsole material hardness on dynamic balance control during unexpected gait termination

637

Influence of forage : concentrate ratio and type of starch in the diet on feeding behaviour, dietary preferences, digestion, metabolism and performance of dairy goats in mid lactation

638

Influence of forage NDF level, source and pelletizing on growth performance, dietary energetics, and characteristics of digestive function for feedlot cattle

639

Influence of force location in orthodontic shear bond strength testing

640

Influence of forecasting electricity prices in the optimization of complex hydrothermal systems

641

Influence of Foreign DNA Introduction and Periplasmic Expression of Recombinant Human Interleukin-2 on Hydrogen Peroxide Quantity and Catalase Activity in Escherichia coli

642

Influence of foreign ions on the crystal structure of BaTiO3

643

Influence of foreign object damage (FOD) on the fatigue life of simulated Ti-6Al-4 V airfoils

644

Influence of forest cover fraction on L-band soil moisture retrievals from heterogeneous pixels using multi-angular observations

645

Influence of forest disturbance on earthworm (Oligochaeta) communities in the Western Ghats (South India)

646

Influence of forest fires on climate change studies in the central boreal forest of Canada

647

Influence of forest floor type on rates of litter decomposition in microcosms

648

Influence of forest floor type on rates of litter decomposition in microcosms

649

Influence of forest fragmentation on amphibian diversity in the nature reserve of Ambohitantely, highland Madagascar Original Research Article

650

Influence of forest fragmentation on an endangered large-bodied lemur in northwestern Madagascar

651

Influence of forest soil on biodegradation of Drimys winteri by Ganoderma australe

652

Influence of forging and cooling rate on microstructure and properties of medium carbon microalloy forging steel

653

Influence of forging deformation and heat treatment on microstructure of Ti–xNb–3Zr–2Ta alloys

654

Influence of forging on mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites

655

Influence of form and quantity of selenium on the development and survival of an insect herbivore

656

Influence of form on Tolerance-Map-generated frequency distributions for 1D clearance in design

657

Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends

658

Influence of former cultivation on the unique Mediterranean steppe of France and consequences for conservation management Original Research Article

659

Influence of formic acid and dry matter on protein degradation in the tanniniferous legume sainfoin

660

Influence of formic acid and water on the [Pd(OAc)2(dppp)] catalyzed ethene–carbon monoxide copolymerization carried out in aprotic organic solvents Original Research Article

661

Influence of formic acid on the microstructure and corrosion resistance of Zn–Ni alloy coatings by electrodeposition

662

Influence of forming atmosphere on the deposition characteristics of 2Cr13 stainless steel during laser solid forming Original Research Article

663

Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes

664

Influence of forming method on the tensile and fatigue properties of Ti–6Al–4V sheet for helicopter erosion shield applications

665

Influence of forming methods on the microstructure of 3Y-TZP specimens

666

Influence of forming parameters on the final subgrain size during hot rolling of aluminium alloys

667

Influence of formulated chemical cleaning reagents on the surface properties and separation efficiency of nanofiltrationmembranes

668

Influence of formulation and glyphosate salt on absorption and translocation in three annual weeds

669

Influence of formulation and mixing conditions on breadmaking qualities of French frozen dough Original Research Article

670

Influence of Formulation Parameters on the Release of Diclofenace Sodium from Matrices with Manufacturing Formulation Ingredients

671

Influence of formulations on textural, mechanical and structural breakdown properties of cooked yellow alkaline noodles

672

Influence of formwork surface on the orientation of steel fibres within self-compacting concrete and on the mechanical properties of cast structural elements

673

INFLUENCE OF FORTIFICATION OF MULBERRY LEAVES WITH NATURAL AND SYNTHETIC MULTIVITAMINS ON GROWTH AND DEVELOPMENT OF Bombyx mori L.

674

Influence of Foundation Flexibility on R(mu) and C(mu) Factors

675

Influence of foundation flexibility on the seismic response of low-to-mid-rise moment-resisting frame buildings

676

Influence of foundation species, depth, and location on diversity and community composition at Gulf of Mexico lower-slope cold seeps

677

INFLUENCE OF FOUR DIFFERENT GROUNDED SEEDS ON CONTROLLING Meloidogyne incognita INFECTING TOMATO PLANT UNDER GREENHOUSE CONDITIONS

678

Influence of four different types of organophilic clay on the morphology and thermal properties of polystyrene/clay nanocomposites prepared by using the γ-ray irradiation technique

679

Influence of Four Phlomis Species on Melanogenesis in Human Malignant Melanoma (SKMEL3) Cells

680

Influence of four run-of-river dams on channel morphology and sediment characteristics in Illinois, USA

681

Influence of four-point bending fatigue on the residual stress state of a pressure-rolled, particulate-reinforced metal matrix composite

682

Influence of four-point bending fatigue on the residual stress state of a pressure-rolled, particulate-reinforced metal matrix composite

683

Influence of fractal pore structure in Claus catalyst performance

684

Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al–Mg alloy

685

Influence of fractionated crystallization on the semicrystalline structure of (POM/(PS/PPE)) blends. Static and time-resolved SAXS, WAXD and DSC studies

686

Influence of fracture gap size on the pattern of long bone healing: a computational study

687

Influence of fracture networks on radionuclide transport from solidified waste forms

688

Influence of fracture process zone height on fracture energy of concrete

689

Influence of fracture truncation on dispersion: A dual permeability model

690

Influence of fractures on the development of low-permeability sandstone reservoirs: A case study from the Taizhao district, Daqing Oilfield, China

691

Influence of framework composition over SAPO-34 and MeAPSO-34 acidity Original Research Article

692

Influence of framework silica-to-alumina ratio on the water adsorption and desorption characteristics of MHI-CaX/CaY zeolite Original Research Article

693

Influence of franchisee selection criteria on outcomes desired by the franchisor

694

Influence of free air space on microbial kinetics in passively aerated compost

695

Influence of free edge and corner singularities on interfacial normal strength: application in model unidirectional composites

696

Influence of free edge intralaminar stresses on damage process in CFRP laminates under thermal cycling conditions

697

Influence of free fatty acid content of coconut oil on deposit and performance of plant oil pressure stoves

698

Influence of free surface and interfaces on diffusion coefficients in Pd–Ag and Pd–Au polycrystalline thin films systems

699

Influence of free surface curvature of a liquid layer on the critical Marangoni convection

700

Influence of free volume on the mechanical properties of Epoxy/poly (methylmethacrylate) blends

701

Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests

702

Influence of free-stream turbulence on the movement-induced vibrations of an elongated rectangular cylinder in cross-flow

703

Influence of freeze-drying conditions on survival of Oenococcus oeni for malolactic fermentation

704

Influence of freeze-drying conditions on the mesoporosity of organic gels as carbon precursors Original Research Article

705

Influence of freeze–thaw cycles on properties of asphalt-modified epoxy repair materials

706

Influence of freeze–thaw on engineering properties of a silty soil

707

Influence of freeze–thaw on the polishing resistance of coarse aggregates on road surface

708

Influence of freeze–thaw on the stored free energy in soils

709

Influence of freezing and thawing on the hydration characteristics, quality, and consumer acceptance of whole muscle beef injected with solutions of salt and phosphate

710

Influence of Freezing on Muscles of Rainbow Trout (Oncorhynchus mykiss): A Histological and Microbiological Study

711

Influence of freezing rate on pore structure in freeze-dried collagen-GAG scaffolds

712

Influence of freezing rate variation on the microstructure and physicochemical properties of food emulsions Original Research Article

713

Influence of Freezing Temperature on Hydraulic Conductivity of Silty Clay

714

Influence of freezing test methods, composition and microstructure on frost durability assessment of clay roofing tiles

715

Influence of Frequency and Bias Current on Asymmetrical GMI Effect in Co71.8 Fe4.9 Nb0.8 Si7.5 B15 Amorphous Glass-Covered Wires Original Research Article

716

Influence of frequency and current waveform on low-pressure sodium lamp operation

717

Influence of frequency and DC bias on magneto-impedance behaviors in double-MgO magnetic tunnel junctions

718

Influence of frequency and exposure to a saline solution on the corrosion fatigue crack growth behavior of the aluminum alloy 2024

719

Influence of frequency and waveform on corrosion fatigue crack propagation in the 2024-T351 aluminium alloy in the S–L orientation

720

INFLUENCE OF FREQUENCY MODULATION OF THE REFLECTED ACOUSTIC SIGNAL ON THE ERROR OF AN ULTRASONIC VIBRATION TRANSDUCER

721

Influence of Frequency of Wave Action on Oil Production

722

Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn–3.5Ag

723

Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn–3.5Ag

724

Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn–3.5Ag

725

Influence of frequency, grade, moisture and temperature on Green River oil shale dielectric properties and electromagnetic heating processes

726

Influence of frequency-dependent properties on system identification: Simulation study on a human pelvis model

727

Influence of Fresh and Thermoxidized Carotino Oil on Cyclic Guanosine Monophosphate (cGMP) in Erythrocytes from Sprague Dawley Rats

728

Influence of fresh date palm co-products on the ripening of a paprika added dry-cured sausage model system

729

Influence of fresh water, nutrients and DOC in two submarine-groundwater-fed estuaries on the west of Ireland Original Research Article

730

Influence of Fresh, Composted and Vermicomposted Parthenium hysterphorus and Poultry Droppings on Quality Parametres of Radish

731

Influence of Freshness and Frozen Storage Temperature on Quality of Thawed Cod Fillets Stored in Modified Atmosphere Packaging

732

Influence of freshwater discharges and tides on the abundance and distribution of larval and juvenile Munida gregaria in the Baker river estuary, Chilean Patagonia

733

Influence of freshwater flow, ocean exchange, and seasonal cycles on phytoplankton – nutrient dynamics in a temporarily open estuary

734

Influence of freshwater inflow on the inorganic nutrient and dissolved organic matter within coastal sea ice and underlying waters in the Gulf of Finland (Baltic Sea)

735

Influence of freshwater inflow variability on the Douro estuary primary productivity: A modelling study

736

Influence of freshwater inflow variability on the Douro estuary primary productivity: A modelling study

737

Influence of fretting regimes on the tribocorrosion behaviour of Ti6Al4V in 0.9 wt.% sodium chloride solution

738

Influence of Friction Condition on Cold Upsetting of Tube Flange

739

Influence of friction in material characterization in microindentation measurement

740

Influence of friction modifier and antiwear additives on the tribological performance of a non-hydrogenated DLC coating

741

INFLUENCE OF FRICTION ON CONTACT STRENGTH AND ADAPTABILITY OF NOVIKOV GEAR DRIVES

742

Influence of friction on die filling in counterblow hammer forging

743

Influence of friction on the surface characteristics of EPDM elastomers with different carbon black contents

744

Influence of Friction Stir Processing Parameters on the Mechanical and Corrosion Properties of Al-Cu-Li Alloy

745

Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy

746

Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy

747

Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds

748

Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints

749

Influence of friction stir welding residual stresses on the compressive strength of aluminium alloy plates

750

Influence of Friction Stir Welding Variables on Hardness, UTS and Yield Strength of Joints Produced in SSM Cast A356 Aluminum Alloy

751

Influence of frictional anisotropy on contacting surfaces during loading/unloading cycles

752

Influence of frictional heating on temperature gradients in ultra-high-pressure liquid chromatography on 2.1 mm I.D. columns

753

Influence of front contact work function on silicon heterojunction solar cell performance

754

Influence of front electrode and back reflector electrode on the performances of microcrystalline silicon solar cells

755

Influence of Front Row Burden on Fragmentation, Muckpile Shape, Excavator Cycle Time, and Back Break in Surface Limestone Mines

756

Influence of frothers on the detachment of galena particles from bubbles

757

Influence of frozen capillary waves on contact mechanics

758

Influence of frozen storage on bread enriched with different ingredients Original Research Article

759

Influence of frozen storage on textural properties of sardine (Sardina pilchardus) mince gels

760

Influence of FRP anchors on the strength and ductility of FRP-strengthened RC slabs

761

Influence of FRP confinement on bond behavior of corroded steel reinforcement

762

Influence of FRP wrapping techniques on the compressive behavior of concrete prisms

763

Influence of fructooligosaccharides on Peyer’s patch lymphocyte numbers in healthy and endotoxemic mice

764

Influence of fruit and vegetable extracts on lipid peroxidation in microsomes containing specific cytochrome P450s

765

Influence of fruit ripeness and salt concentration on the microbial processing of Arbequina table olives Original Research Article

766

Influence of fruit ripening on ‘Cornicabra’ virgin olive oil quality A study of four successive crop seasons

767

Influence of fruit ripening process on the natural antioxidant content of Hojiblanca virgin olive oils

768

Influence of Frying Conditions and Wild Sage Seed Mucilage Coating on the Physical Properties and Oil Uptake of Zucchini Slices during Deep-Fat Frying

769

Influence of frying conditions on acrylamide content and other quality characteristics of French fries

770

Influence of frying conditions on acrylamide content and other quality characteristics of French fries

771

Influence of frying fat on the formation of heterocyclic amines in fried beefburgers and pan residues

772

Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds

773

Influence of fuel additives on performance of direct-injection Diesel engine and exhaust emissions when operating on shale oil

774

Influence of fuel and air/fuel equivalence ratio on the emission of hydrocarbons from a SI engine. 1. Experimental findings

775

Influence of fuel and air/fuel equivalence ratio on the emission of hydrocarbons from a SI engine. 2. Formation pathways and modelling of combustion processes

776

Influence of fuel ash composition on high temperature aerosol formation in fixed bed combustion of woody biomass pellets

777

Influence of fuel bundle loading errors on the subcritically during refueling campaigns for the present BWR cores of KRB-II

778

Influence of fuel composition on chemiluminescence emission in premixed flames of CH4/CO2/H2/CO blends

779

Influence of fuel composition on polycyclic aromatic hydrocarbon emissions from a fleet of in-service passenger cars

780

Influence of fuel costs on seawater desalination options Original Research Article

781

Influence of fuel feeding positions on gasification in dual fluidized bed gasifiers

782

Influence of fuel fraction gradient on triple flame velocity in plain and axis-symmetrical channels

783

Influence of fuel oxygen content on diesel engine exhaust emissions

784

Influence of fuel particle size on gasification in a dual fluidized bed steam gasifier

785

Influence of fuel properties and composition on NOx emissions from biodiesel powered diesel engines: A review

786

Influence of fuel ratios on auto combustion synthesis of barium ferrite nano particles

787

Influence of fuel sulfur on the characterization of PM10 from a diesel engine

788

Influence of Fuel Type on Ultrasonic-assisted Combustion Synthesis of NiMo/ Al2O3 Catalyst for Hydrodesulfurization of Thiophene

789

Influence of fuel volatility and spray parameters on combustion characteristics and NOx emission in a gas turbine combustor

790

Influence of fuels and combustion aids on solution combustion synthesis of bi-phasic calcium phosphates (BCP)

791

Influence of fuels on the morphology of undoped Y3Al5O12 and photoluminescence of Y3Al5O12:Eu3+ prepared by a combustion method

792

Influence of fuel-to-oxidizer ratio on the magnetic properties of Fe-doped In2O3 nanoparticles synthesized by solution combustion method

793

Influence of fuel-to-oxidizer ratio on the magnetic properties of Fe-doped In2O3 nanoparticles synthesized by solution combustion method

794

Influence of Full and Symmetrical Domains on the Numerical Flow around a SUBOFF Submarine Model using OpenFOAM

795

Influence of fullerene derivative replacement with TiO2 nanoparticles in organic bulk heterojunction solar cells

796

Influence of fumed silica and additives on the gel formation and performance of gel valve-regulated lead-acid batteries

797

Influence of fumigation methanol on the combustion and particulate emissions of a diesel engine

798

Influence of Functional Alloy on Crystal Structure and Properties of Scales

799

Influence of functional bracing on the kinetics of anterior cruciate ligament-injured knees during level walking

800

Influence of functional group effect on the K-shell X-ray production cross-sections and average fluorescence yields of sulphur in 1,2,4-triazol-5-one compounds containing thiophene

801

Influence of functional groups on the adsorption behaviour of substituted benzoic acids at the α-alumina/water interface

802

Influence of functional groups on the Cα–Cβ chain of l-phenylalanine and its derivatives

803

Influence of functional groups on the Cα–Cβ chain of l-phenylalanine and its derivatives

804

Influence of functional groups on the in vitro anticoagulant activity of chitosan sulfate Original Research Article

805

Influence of Functional Nutrients on Insulin Resistance in Horses with Equine Metabolic Syndrome

806

Influence of functional tricuspid regurgitation on right ventricular function

807

Influence of functionalization on interaction and drug release from α,β-polyaspartylhydrazide derivatives to a biomembrane model: evaluation by differential scanning calorimetry technique

808

Influence of functionalization on properties of MWCNT–epoxy nanocomposites

809

Influence of functionalized fullerene structure on polymer photovoltaic degradation

810

Influence of functionalized nanoparticles on conformational stability of type I collagen for possible biomedical applications

811

Influence of Fungal Elicitors on Production of Ajmalicine by Cell Cultures of Catharanthus roseus

812

Influence of Fungal Enzyme Pre-treatment on Totally Chlorine-free (TCF) Bleaching of Dimethyl Formamid Bagasse Pulp

813

INFLUENCE OF FUNGAL EXTRACTS, BOTANICAL EXTRACTS AND SYNTHETIC INSECTICIDE ON LARVAL MORTALITY AND REPELLENCY OF ANGOUMOIS GRAIN MOTH, SITOTROGA CEREALELLA (LEPIDOPTERA: GELECHIIDAE)

814

Influence of fungicide and sowing density on the growth and yield of two groundnut cultivars

815

Influence of fungicide spray schedules on the sensitivity of Cercospora beticola to the sterol demethylation-inhibiting fungicide flutriafol

816

Influence of Fusarium Crown Rot Disease on Semiochemical Production by Wheat Plants

817

Influence of Fusarium oxysporum-resistant pumpkin rootstock on the productivity of the F1 Asylum cucumber hybrid

818

Influence of fused zirconium corundum addition on properties of chrome-free castables for RH refining furnace

819

Influence of fusing temperature on microstructure, wear and corrosion resistance of induction melted bimetal of Co-based alloy and AISI 4140 steel

820

Influence of fusion barrier distributions on spin populations Original Research Article

821

Influence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon steel and DP600 advanced high strength steel

822

Influence of fuzzy Goal Programming in Production Optimization Case study: Cement Industry

823

Influence of fuzzy norms and other heuristics on “Mixed fuzzy rule formation” Original Research Article

824

Influence of G308A polymorphism of tumor necrosis factor-α gene on inflammatory markers in postsurgical head and neck cancer patients with early enteral nutrition

825

Influence of G308A Promoter Variant of Tumor Necrosis Factor-α Gene on Insulin Resistance and Weight Loss Secondary to Two Hypocaloric Diets: A Randomized Clinical Trial

826

Influence of Ga addition on the methanol synthesis activity of Cu/ZnO catalyst in the presence and absence of alumina

827

Influence of Ga incorporation on photoinduced phenomena in Ge–S based glasses

828

Influence of Ga+ ion irradiation on magnetoresistance and exchange bias of IrMn/CoFe/Cu/CoFe/NiFe spin valve

829

Influence of GA3 and boric acid foliar application on bioactive compounds and quality of pomegranate fruit (Punica granatum L.)

830

Influence of Ga3+ ions on spectroscopic and dielectric features of multi component lithium lead boro bismuth silicate glasses doped with manganese ions

831

Influence of GAA expansion size and disease duration on central nervous system impairment in Friedreichʹs ataxia: contribution to the understanding of the pathophysiology of the disease

832

Influence of GaAs(0 0 1) pregrowth surface morphology and reconstruction on the growth of InGaAs layers

833

Influence of gadolinium concentration on the ESR spectrum of Gd3+ in CaO

834

Influence of gadolinium concentration on the ESR spectrum of Gd3+ in MgO

835

Influence of gadolinium on microstructure and magnetic properties of sintered NdGdFeB magnets

836

Influence of gait speed on stability: recovery from anterior slips and compensatory stepping

837

Influence of galangin on HL-60 cell proliferation and survival

838

Influence of gallium on the properties of Pt–Re/Al2O3 naphtha reforming catalysts Original Research Article

839

Influence of galvanization on the corrosion fatigue performance of high-strength steel

840

Influence of gamma irradiation effects on the residual alteration rate of the French SON68 nuclear glass

841

Influence of gamma irradiation in the antioxidant potential of chestnuts (Castanea sativa Mill.) fruits and skins

842

Influence of gamma irradiation on surface potential decay of corona charged polyethylene

843

Influence of gamma irradiation on the chemical and physical properties of DGEDDS / PDA and DGEDDS / MDA epoxy resins

844

Influence of gamma radiation on nutrient contents of canned tomato paste

845

Influence of Gamma Radiation on Some Optical Properties and Urbach Energy of (PMMA- Doped Red Methyl) Films

846

Influence of gamma ray irradiation on metakaolin based sodium geopolymer

847

Influence of Gamma Rays on the Performance and Genetic Parameters for Grain Yield and Yield Attributes of Bread Wheat

848

Influence of gamma-irradiation sterilization and temperature on the fracture toughness of ultra-high-molecular-weight polyethylene

849

Influence of gamma-radiation on mycotoxin producing moulds and mycotoxins in fruits

850

Influence of gap size and development stages on the silvicultural characteristics of oriental beech (Fagus orientalis Lipsky) regeneration

851

Influence of gap size on wind damage variables in a forest

852

Influence of gap states on the electrical stability of pentacene thin film transistors

853

Influence of gas and treatment time on the surface modification of EPDM rubber treated at afterglow microwave plasmas

854

Influence of gas atmosphere and hard particle addition on the sintering behavior of high alloyed PM cold work tool steels

855

Influence of gas components on removal of SO2 from flue gas in the semidry FGD process with a powder–particle spouted bed

856

Influence of gas composition on the reactivity of cokes

857

Influence of gas compression on flame acceleration in channels with obstacles

858

Influence of gas compression on flame acceleration in the early stage of burning in tubes

859

Influence of gas emission on heat transfer in porous ceramics

860

Influence of gas environment on reactions between sodium and silicon minerals during gasification of low-rank coal

861

Influence of gas flow on argon microwave plasma jet at atmospheric pressure

862

Influence of gas flow rate and entry point on ion charge, ion counts and ion energy distribution in a filtered cathodic arc

863

Influence of gas flow rate and frothers on water recovery in a froth column

864

Influence of gas flow rate on oxygen flux measurements for dense oxygen conducting ceramic membranes

865

Influence of gas flow rate on the microstructure and mechanical properties of hydroxyapatite coatings fabricated by gas tunnel type plasma spraying

866

Influence of gas flow-induced shear stress on the operation of the Anammox process in a SBR Original Research Article

867

Influence of gas injection on phase inversion in an oil–water flow through a vertical tube

868

Influence of Gas Insulated Switchgear Configuration Components on UHF PD Signals

869

Influence of gas nitriding of Ti6Al4V alloy at high temperature on the adhesion of Staphylococcus aureus

870

Influence of gas nitriding pressure on the surface properties of ASTM F138 stainless steel

871

Influence of gas pressure on the plasma reaction on polyethersulphone

872

Influence of gas production induced volumetric strain on permeability of coal

873

Influence of gas residence time and air ratio on the air gasification of dried sewage sludge in a bubbling fluidised bed

874

Influence of gas sparging on clarification of pineapple wine by microfiltration Original Research Article

875

Influence of gas to particle conversion on the modal size distribution of atmospheric particles

876

Influence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks

877

Influence of gas velocity and electric field intensity on particle deposit and re-entrainment phenomena in an electrostatic precipitator

878

Influence of gas velocity on particulate fouling of exhaust gas recirculation coolers

879

Influence of gaseous end-products inhibition and nutrient limitations on the growth and hydrogen production by hydrogen-producing fermentative bacterial B49

880

Influence of gaseous hydrogen on the notched tensile strength of D6ac steel

881

Influence of gaseous hydrogen on the notched tensile strength of D6ac steel

882

Influence of gaseous hydrogen on the tensile properties of Fe–36Ni INVAR alloy

883

Influence of gaseous species transport on the response of solid state gas sensors within enclosures

884

Influence of gases on direct-drive cryogenic targets in laser fusion reactor with wet wall

885

Influence of gate bias of MISiC-FET gas sensor device on the sensing properties

886

Influence of gate thermal oxide layer on InGaP/InGaAs doping-channel field-effect transistors

887

Influence of Gating System, Sand Grain Size, and Mould Coating on Microstructure and Mechanical Properties of Thin-Wall Ductile Iron Original Research Article

888

Influence of gaze direction on crossmodal modulation of visual ERPS by endogenous tactile spatial attention

889

Influence of GB virus C viraemia on the clinical, virological and histological features of early hepatitis C-related hepatic disease

890

Influence of Gd and Fe on crystallization of Al87Y5Ni8 amorphous alloy

891

Influence of Gd2O3 addition on thermophysical properties of La2Ce2O7 ceramics for thermal barrier coatings

892

Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability, Thermo-physical Properties and Sintering of 8YSZ

893

Influence of Gd3+ doping on the luminescent of Sr2P2O7:Eu3+ orange–red phosphors

894

Influence of Gd3+ on the visible quantum cutting in green-emitting silicate Na3Gd0.9−xYxSi3O9:0.1Tb3+ phosphors

895

Influence of Ge content on formation of radiation defects in Si1−xGex solid solutions

896

Influence of Ge content on the activity of Ru–Ge–B/Al2O3 catalysts for selective hydrogenation of methyl oleate to oleyl alcohol

897

Influence of Ge doping level on the EPR signal of Ge(1), Ge(2) and EʹGe defects in Ge-doped silica

898

Influence of gel aging and Na2SiO3/H2O molar ratio on monolithicity and physical properties of water–glass-based aerogels dried at atmospheric pressure

899

Influence of gel composition in the synthesis of MoVTeNb catalysts over their catalytic performance in partial propane and propylene oxidation

900

Influence of gelatin coatings on compressive strength of porous hydroxyapatite ceramics

901

Influence of gelatin matrices cross-linked with transglutaminase on the properties of an enclosed bioactive material using β-galactosidase as model system

902

Influence of gelatin, starch, pectin and artificial saliva on the release of 11 flavour compounds from model gel systems

903

Influence of gelatinization process on functional properties of cassava starch films

904

Influence of gelatin–sodium stearoyl lactylate interaction on the rheological properties of gelatin gels

905

Influence of gelation time on the morphological and physico-chemical properties of the sol–gel entrapped lipase

906

Influence of gel-derived nanocrystalline spinel in a high alumina castable: Part 1

907

Influence of gel-derived nanocrystalline spinel in a high alumina castable: Part 2

908

Influence of geminate recombination kinetics on the shape of low field MARY line Original Research Article

909

Influence of gender and age on excitation-contraction coupling in cardiac myocytes from calmodulin-induced diabetic transgenic (BIC) mice

910

Influence of gender and degree of obesity on the left ventricular adaptation to pressure overload in stage I hypertension.

911

Influence of Gender and Demographic Variables on Awareness of Secondary School Students on HIV/AIDS Infection in Abuja, Nigeria

912

Influence of gender and financing on tourist company growth

913

Influence of gender and hemispheric lateralization on heat pain perception in major depression

914

Influence of gender and menstrual cycle on volatile sulphur compounds production

915

Influence of gender and race on hemodynamic response to dobutamine during dobutamine stress echocardiography

916

Influence of Gender on Clinical Outcomes Following Transcatheter Aortic Valve Implantation from the UK Transcatheter Aortic Valve Implantation Registry and the National Institute for Cardiovascular Outcomes Research

917

Influence of gender on early and one-year clinical outcomes after saphenous vein graft stenting

918

Influence of gender on hip and knee mechanics during a randomly cued cutting maneuver

919

Influence of gender on intraluminal thrombus of abdominal aortic aneurysms

920

Influence of Gender on Ischemic Times and Outcomes After ST-Elevation Myocardial Infarction

921

Influence of Gender on Long-Term Mortality in Patients Presenting With Non–ST-Elevation Acute Coronary Syndromes Undergoing Percutaneous Coronary Intervention

922

Influence of Gender on Physiologic Response and Accuracy of Dobutamine Echocardiography

923

Influence of gender on short- and long-term mortality after acute myocardial infarction

924

Influence of gender on the metabolism of alcohols in human saliva in vitro

925

Influence of gender preference and sex composition of surviving children on childbearing intention among high fertility married women in stable union in Malawi

926

Influence of gender, age and motives underlying food choice on perceived healthiness and willingness to try functional foods

927

Influence of gender, estrogen and exercise on anterior knee laxity

928

Influence of gender, race, and education on patient preferences and receipt of cardiac catheterizations among coronary care unit patients

929

Influence of gene polymorphisms of the renin-angiotensin system on clinical outcome in heart failure among the Chinese, ,

930

Influence of gene-linkage and recombination of evolutionary algorithms on the rate of evolution, genetic diversity and the response of evolving populations to disturbance

931

Influence of general and specific autobiographical recall on subsequent behavior: The case of cognitive performance

932

Influence of general convective motions on the exterior of isolated rotating bodies in equilibrium

933

Influence of Generator Load Conditions on Third-Harmonic Voltages in Generator Stator Winding

934

Influence of genetic abnormalities on semen quality and male fertility: A four-year prospective study

935

INFLUENCE OF GENETIC AND GENOTYPE x ENVIRONMENT INTERACTION ON QUALITY OF RICE GRAIN

936

Influence of genetic background and gender on bladder function in the mouse

937

Influence of genetic merit and environment on somatic cell counts of Holstein–Friesian cows

938

Influence of Genetic Polymorphism in Matrix Metalloproteinase-3 on Extent of Coronary Atherosclerosis and Risk of Coronary Artery Stenosis

939

Influence of Genetic Polymorphisms on the Effect of High- and Standard-Dose Clopidogrel After Percutaneous Coronary Intervention: The GIFT (Genotype Information and Functional Testing) Study

940

Influence of genetic type and level of concentrate in the finishing diet on carcass and meat quality traits in beef heifers

941

Influence of genetic type, live weight at slaughter and carcass fatness on fatty acid composition of subcutaneous adipose tissue of raw ham in the heavy pig

942

Influence of genetic type, live weight at slaughter and carcass fatness on fatty acid composition of subcutaneous adipose tissue of raw ham in the heavy pig

943

Influence of genetic variability in the nondeletion LDL-receptor allele on phenotypic variation in French-Canadian familial hypercholesterolemia heterozygotes sharing a ‘null’ LDL-receptor gene defect Original Research Article

944

Influence of genetic variation at the apo A-I gene locus on lipid levels and response to diet in familial hypercholesterolemia Original Research Article

945

Influence of Genetically Manipulated Brassica Genotypes on Parasitism Capacity of Diadegma semiclausum Parasitizing Plutella xylostella

946

Influence of genitally pathogenic bacteria and gentamicin on motility and membrane integrity of cooled-stored stallion spermatozoa

947

Influence of genotype and environment on oil and protein concentrations of canola (Brassica napus L.) grown across southern Australia

948

Influence of genotype and protein content on the baking quality of hearth bread

949

Influence of genotype and slaughtering age on meat from Altamurana and Trimeticcio lambs

950

Influence of genotype and stage of maturity of maize on rate of ruminal starch degradation

951

Influence of genotype at the low density lipoprotein (LDL) receptor gene locus on the clinical phenotype and response to lipid-lowering drug therapy in heterozygous familial hypercholesterolaemia Original Research Article

952

Influence of genotype on physico-mechanical characteristics of goat and sheep leather

953

Influence of genotype, harvest time and plant part on polyphenolic composition of globe artichoke [Cynara cardunculus L. var. scolymus (L.) Fiori]

954

Influence of Genotype, Site, and Year on Maize Nutritive Value – Yield Relationships

955

Influence of geochemical and physical processes on the vertical distribution of manganese in Gulf of California waters

956

Influence of Geographic Origin and Plant Source on Physicochemical Properties, Mineral Content, and Antioxidant and Antibacterial Activities of Moroccan Propolis

957

Influence of geographical location, crop type and crop residue cover on bacterial and fungal community structures

958

Influence of geography on language competition

959

Influence of geology, glacial processes and land use on soil composition and Quaternary landscape evolution in The Burren National Park, Ireland

960

Influence of geometric and electronic characteristics of TiO2 electrodes with nanotubular array on their photocatalytic efficiencies

961

Influence of geometric design of alternate partial root-zone subsurface drip irrigation (APRSDI) with brackish water on soil moisture and salinity distribution

962

INFLUENCE OF GEOMETRIC NON-LINEARITIES ON THE FREE VIBRATIONS OF ORTHOTROPIC OPEN CYLINDRICAL SHELLS

963

Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review

964

Influence of Geometric Parameters on Overall Performance of High Bypass Ratio Turbofan Nacelle and Exhaust System

965

Influence of geometric parameters on the eventual buoyancy stratification that develops due to architectural exchange flow

966

Influence of geometric parameters on the hydrodynamics control of solar chimney

967

Influence of geometrical and operational parameters on the axial dispersion in an aerated channel reactor

968

Influence of geometrical conditions on central burst appearance in axisymmetrical drawing processes

969

Influence of geometrical defects on the mechanical behaviour of hollow-sphere structures

970

Influence of geometrical factors on steam ejector performance – A numerical assessment

971

Influence of geometrical parameters and forced convective heat transfer in transversely corrugated circular tubes

972

Influence of geometrical parameters on radial force during self-expanding stent deployment. Application for a variable radial stiffness stent

973

Influence of geometrical parameters on the elastic response of unidirectional composite materials

974

Influence of geometrical personalization on the simulation of clavicle fractures

975

Influence of geometrical structure of the anions on the adsorption parameters at the Bi(0 0 1) electrode

976

Influence of geometry and eclogitization on oceanic plateau subduction

977

Influence of geometry and environmental parameters on the quality of signature patterns for single neuron chemical sensors

978

Influence of geometry and equilibrium chemistry on relative recovery during enhanced microdialysis

979

Influence of geometry and equilibrium chemistry on relative recovery during enhanced microdialysis Original Research Article

980

Influence of geometry and operating parameters on the stability response of single-phase natural circulation loop

981

Influence of geometry factors of in situ dc glow discharge on the diamond nucleation in a hot-filament chemical vapor deposition system

982

Influence of geometry on light harvesting in dendrimeric systems

983

Influence of geometry on light harvesting in dendrimeric systems. II. nth-nearest neighbor effects and the onset of percolation

984

Influence of geometry on stratification and segregation phenomena in bidimensional piles

985

Influence of geometry shape on gas explosion propagation laws in bend roadways

986

Influence of geometry-limited diffusion on the selective catalytic reduction of NO by hydrocarbons over Cu-exchanged zeolite

987

Influence of geomorphological constraints and exploitation techniques on stone quarry spatial organisation: Example of Lutetian underground quarries in Rheims, Laon and Soissons areas

988

Influence of geomorphological variables on mountainous stream water chemistry (Sierras Pampeanas, Cَrdoba, Argentina)

989

Influence of georeference for saturated excess overland flow modelling using 3D volumetric soft geo-objects

990

Influence of germination and extrusion with CO2 injection on physicochemical properties of wheat extrudates

991

Influence of germination on the soluble carbohydrates and dietary fibre fractions in non-conventional legumes

992

Influence of germination techniques on phytic acid and polyphenols content of chickpea (Cicer arietinum L.) sprouts

993

Influence of germination techniques on sprout yield, biosynthesis of ascorbic acid and cooking ability, in chickpea (Cicer arietinum L.)

994

Influence of gerrymandering on voting patterns in the Constituency Legislative Assembly Area of Kajang and Bangi, Malaysia

995

Influence of gestation on uterine endometrial steroid receptor concentrations in the African elephant, Loxodonta africana

996

Influence of gestational age on fetal deoxyribonucleic acid retrieval in maternal peripheral blood, ,

997

Influence of gestational overfeeding on cardiac morphometry and hypertrophic protein markers in fetal sheep

998

Influence of gestational overfeeding on myocardial proinflammatory mediators in fetal sheep heart

999

Influence of GGBS on durability and corrosion behavior of reinforced concrete

1000

Influence of giant kelp beds (Macrocystis pyrifera) on diel cycles of pCO2 and DIC in the Sub-Antarctic coastal area

بازگشت