<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modeling and simulation of ac–dc buck-boost converter fed dc motor with uniform PWM technique
2
Modeling and Simulation of Acoustic Signal Transmission Losses in Shallow Water Channels Using Neural Networks
3
Modeling and simulation of active suspensions containing large numbers of interacting micro-swimmers
4
Modeling and simulation of aerial refueling by finite element method
5
Modeling and Simulation of Alternative Injections of CO2 and Water into Porous Carbonate Formations
6
Modeling and simulation of AlxGayIn1−x−yAs/InP quaternary structure for photovoltaic
7
Modeling and simulation of an activated carbon-based botanical air filtration system for improving indoor air quality
8
Modeling and simulation of an activated carbon–CO2 four bed based adsorption cooling system
9
Modeling and simulation of an impact test using wavelets, analytical solutions and finite elements
10
Modeling and Simulation of an Industrial Fluid Catalytic Cracking Riser Reactor Using a Lump-Kinetic Model for a Distinct Feedstock
11
Modeling and simulation of an industrial secondary reformer reactor in the fertilizer plants
12
Modeling and simulation of an integrated multi-shell fixed bed membrane reactor with well-mixed catalyst pattern for production of styrene and cyclohexane
13
Modeling and simulation of an oilseed meal desolventizing process Original Research Article
14
Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle- Fluid Dynamics (CPFD) Approach
15
Modeling and simulation of asphaltene precipitation by normal pressure depletion
16
Modeling and simulation of asymmetrical three-roll bending process
17
Modeling and simulation of autonomous underwater vehicles: design and implementation
18
Modeling and simulation of buckling of embedded carbon nanotubes
19
Modeling and simulation of butanol separation from aqueous solutions using pervaporation
20
Modeling and simulation of carbon black synthesis in an aerosol flame reactor
21
Modeling and simulation of catalytic partial oxidation of methane to synthesis gas by using a plasma-assisted gliding arc reactor
22
Modeling and simulation of C-E deep bowl pulverizer
23
Modeling and simulation of cell populations interaction
24
Modeling and simulation of cement clinkering process with compact internal burning of carbon
25
Modeling and simulation of cement hydration kinetics and microstructure development Review Article
26
Modeling and simulation of centerless grinding of ball bearings
27
Modeling and simulation of circulating fast fluidized bed reactors and circulating fast fluidized bed membrane reactors for production of hydrogen by oxidative reforming of methane
28
Modeling and simulation of circulating fluidized bed reactor with catalytic ozone decomposition reaction
29
Modeling and Simulation of Claus Unit Reaction Furnace
30
Modeling and simulation of clean fuel production by Enterobacter cloacae IIT-BT 08
31
Modeling and simulation of co-gasification of coal and petcoke in a bubbling fluidized bed coal gasifier
32
Modeling and simulation of cogeneration nuclear power plant for seawater desalination
33
Modeling and simulation of combined gas turbine engine and heat pipe system for waste heat recovery and utilization
34
Modeling and simulation of combined pyrolysis and reduction zone for a downdraft biomass gasifier
35
Modeling and Simulation of Common Mode Voltage in a Three-Phase Delta Connection STATCOM with Parasitic Capacitors
36
Modeling and simulation of communication systems: an overview
37
Modeling and simulation of compressed air storage in caverns: A case study of the Huntorf plant
38
MODELING AND SIMULATION OF CONDENSED SULFUR IN CATALYTIC BEDS OF CLAUS PROCESS: RAPID ESTIMATION
39
Modeling and simulation of consumer response to dynamic pricing with enabled technologies
40
Modeling and simulation of corporate lifecycle using system dynamics
41
Modeling and simulation of corrosion product activity in pressurized water reactors under power perturbations
42
Modeling and simulation of coupled nuclear heat energy deposition and transfer in the fuel assembly of the Ghana Research Reactor-1 (GHARR-1)
43
Modeling and simulation of curing kinetics for the cardanol-based vinyl ester resin by means of non-isothermal DSC measurements
44
Modeling and simulation of cylindrical electro-chemical magnetic abrasive machining of AISI-420 magnetic steel
45
Modeling and simulation of damage in elastomer structures at high strains
46
Modeling and simulation of data transmission on a hybrid fiber coax cable network
47
Modeling and Simulation of DC Electric Railway System with Regenerative Braking: A Case Study of Isfahan Metro Line 1
48
Modeling and simulation of DC motors in dynamic conditions allowing for the armature reaction
49
Modeling and simulation of deadbeat-based PI controller in a single-phase H-bridge inverter for stand-alone applications
50
Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture
51
Modeling and simulation of deformation of hydrogels responding to electric stimulus
52
Modeling and simulation of desiccant wheel for air conditioning
53
Modeling and Simulation of Diimide Hydrogenation of Nitrile Butadiene Rubber Latex
54
Modeling and simulation of direct output current control for LCL-interfaced grid-connected inverters with parallel passive damping
55
Modeling and simulation of directional hardening in metals during non-proportional loading
56
Modeling and simulation of dissolved lead in groundwater influenced by porosity and seepage velocity in homogeneous formation
57
Modeling and Simulation of Distillation of a Binary Non-Reacting Mixture Using Rate-Based Approach in Packed Column under Total Reflux
58
Modeling and simulation of distributed systems and networks
59
Modeling and simulation of drug release from multi-layer biodegradable polymer microstructure in three dimensions
60
Modeling and simulation of drying operations in PVC powder production line: Experimental and theoretical study of drying kinetics on particle scale
61
Modeling and simulation of effective forces in the manipulation of cylindrical nanoparticles in a liquid medium
62
Modeling and simulation of electric machines, converters and systems
63
Modeling and simulation of electrification delivery in functionalized textiles in electromagnetic fields
64
Modeling and simulation of electronic structure, material interface and random doping in nano-electronic devices
65
Modeling and simulation of entric -virus transport in deltaic environment rivers state of Nigeria
66
Modeling and simulation of enzymatic membrane reactor for kinetic resolution of ibuprofen ester
67
Modeling and simulation of equation of state for nonadditive hard disk mixtures
68
Modeling and simulation of evaporation–pyrolysis processes of a naturally smoldering cylindrical cellulosic materials rod: Effect of smoldering rate on product concentrations
69
Modeling and Simulation of Fed-Batch Protein Refolding Process
70
Modeling and Simulation of Finite State Machine Memory Built-in Self Test Architecture for Embedded Memories
71
Modeling and Simulation of FIR Filters and Comparison of Frequency Response in Time Domain and Frequency Domain for UMTS
72
Modeling and simulation of fire spreading through the activity tracking paradigm
73
Modeling and simulation of fire spreading through the activity tracking paradigm
74
Modeling and simulation of fish-like swimming
75
Modeling and simulation of flexible needles
76
Modeling and simulation of flexible slider-crank mechanism with clearance for a closed high speed press system
77
Modeling and simulation of FPGA-based variable-speed drives using Simulink Original Research Article
78
Modeling and simulation of galvanic corrosion pit as a moving boundary problem
79
Modeling and simulation of gene regulation and metabolic pathways
80
Modeling and simulation of genetic algorithm using meta-models
81
Modeling and simulation of GPR wave propagation through wet snowpacks: Testing the sensitivity of a method for snow water equivalent estimation
82
Modeling and simulation of grain growth in Si3N4. III. Tip shape evolution Original Research Article
83
Modeling and simulation of gravitational solid–solid separation for optimum performance
84
Modeling and simulation of grid-connected photovoltaic energy conversion systems
85
Modeling and Simulation of Hamburger Cooking Process Using Finite Difference and CFD Methods
86
Modeling and simulation of heat transfer phenomena during investment casting
87
Modeling and Simulation of Heat Transfer Phenomenon in Steel Belt Conveyer Sulfur Granulating Process
88
Modeling and simulation of HgCdTe based p+–n–n+ LWIR photodetector
89
Modeling and simulation of high speed sliding
90
Modeling and simulation of hydraulic buffering valve for power-shift transmission
91
Modeling and Simulation of Hydraulic Roll Bending System Based on CMAC Neural Network and PID Coupling Control Strategy Original Research Article
92
Modeling and simulation of hydrogen combustion in engines
93
Modeling and simulation of hydrogen generation from high-temperature and low-temperature water gas shift reactions
94
Modeling and simulation of IEEE 802.11 WLAN mobile ad hoc networks using topology broadcast reverse-path forwarding (TBRPF)
95
Modeling and simulation of inertial drop break-up in a turbulent pipe flow downstream of a restriction
96
Modeling and simulation of inorganic shell and tube membranes for vapor permeation
97
Modeling and Simulation of Interfacial Turbulent Flows
98
Modeling and Simulation of Ionic Currents in Three-Dimensional Microfluidic Devices with Nanofluidic Interconnects
99
Modeling and simulation of irradiation effects on martensitic transformations in shape memory alloys Original Research Article
100
Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors
101
Modeling and Simulation of Kuhni Extraction Column Using a Rate-based Model
102
Modeling and simulation of large scale hydrogen production
103
Modeling and simulation of large-scale ductile fracture in plates and shells
104
Modeling and simulation of large-scale ductile fracture in plates and shells
105
Modeling and simulation of Li-ion conduction in poly(ethylene oxide)
106
Modeling and simulation of liquid pulsed particulate fluidized beds
107
Modeling and simulation of load heating in heat treatment furnaces
108
Modeling and simulation of long-wave infrared InAs/GaSb strained layer superlattice photodiodes with different passivants
109
Modeling and simulation of loose spring skirt damping and control of vibrations in a multi-segment hanging cantilever Original Research Article
110
Modeling and simulation of low-cycle fatigue life of steel reinforcing bars using artificial neural network
111
Modeling and simulation of magnetic-shape-memory polymer composites
112
Modeling and simulation of maintenance operations at Kuwait public transport company
113
Modeling and Simulation of Manufacturing Systems and Extended Enterprises
114
Modeling and simulation of martensitic phase transitions with a triple point
115
Modeling and simulation of materials synthesis: Chemical vapor deposition and infiltration of pyrolytic carbon
116
Modeling and simulation of matrix converter/induction motor drive Original Research Article
117
Modeling and simulation of mechanical properties of nano-particle filled materials
118
Modeling and simulation of membrane bioreactors by incorporating simultaneous storage and growth concept: an especial attention to fouling while modeling the biological process Original Research Article
119
Modeling and simulation of metabolic networks for estimation of biomass accumulation parameters Original Research Article
120
Modeling and simulation of methane steam reforming in a thermally coupled membrane reactor
121
MODELING AND SIMULATION OF MHD CONVECTIVE HEAT TRANSFER OF CHANNEL FLOW HAVING A CAVITY
122
Modeling and simulation of microwave double absorption on methanol steam reforming for hydrogen production
123
Modeling and simulation of mid-IR amplifying characteristics of Tm3+-doped chalcogenide Photonic Crystal Fibers
124
Modeling and simulation of mixed-signal electronic designs - Enabling analog and discrete subsystems to be represented uniformly within a single framework
125
Modeling and Simulation of Modern Industrial Screens using Discrete Element Method
126
Modeling and simulation of multicellular tumor growth using a nonlinear matter wave equation
127
Modeling and Simulation of Multilevel Inverters used in Hybrid Systems (PV/Wind) Connected to Smart Grid
128
Modeling and simulation of multiple impacts of falling rigid bodies
129
Modeling and simulation of muscle forces of trans-tibial amputee to study effect of prosthetic alignment
130
Modeling and simulation of net energy gain by dark fermentation
131
Modeling and simulation of next-generation multimode fiber links
132
Modeling and simulation of nitrogen regulation in Corynebacterium glutamicum Original Research Article
133
Modeling and simulation of nonsolvent vapor-induced phase separation
134
Modeling and Simulation of Olefin Polymerization at Microstructure Level
135
Modeling and simulation of osmotic pressure controlled electro-ultrafiltration in a cross-flow system
136
Modeling and simulation of partial deposition of phosphorous and heavy metal influenced by permeability and void ratio in soil and water in Oyigbo, rivers state of Nigeria
137
Modeling and Simulation of Partial Oxidation of Methanol to Formaldehyde on FeO/MoO3 Catalyst in a Catalytic Fixed Bed Reactor
138
Modeling and simulation of performance analysis for a cluster-based Web server
139
Modeling and simulation of petroleum coke calcination in rotary kilns
140
Modeling and simulation of photonic devices by generalized space mapping technique
141
Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model
142
Modeling and simulation of piezocomposites Original Research Article
143
Modeling and simulation of pit chemistry of 304 austenitic stainless steel under applied stress in sodium chloride solution
144
Modeling and simulation of plasma jet by lattice Boltzmann method
145
Modeling and simulation of point-non-point source effluent trading in Taihu Lake area: perspective of non-point sources control in China
146
Modeling and simulation of pollutants transport in rivers
147
Modeling and simulation of polyhydroxybutyrate production by Protomonas extorquens in fed-batch culture
148
Modeling and Simulation of Pressure Equalization Step Between a Packed Bed and an Empty Tank in Pressure Swing Adsorption Cycles
149
Modeling and simulation of productʹs surface design
150
Modeling and simulation of progressive penetration of multilayered ballistic fabric shielding
151
Modeling and Simulation of Projects with Petri Nets
152
MODELING AND SIMULATION OF PROPANE PYROLYSIS FURNACE WITH MOLECULAR KINETIC AND COKE FORMATION
153
Modeling and simulation of protein uptake in cation exchanger visualized by confocal laser scanning microscopy
154
Modeling and simulation of reduction zone of downdraft biomass gasifier: Effect of char reactivity factor
155
Modeling and simulation of relaxation in viscoelastic open cell materials and structures
156
Modeling and simulation of relaxation in viscoelastic open cell materials and structures
157
Modeling and simulation of saturated induction motors in phase quantities
158
Modeling and simulation of sedimentation processes in a lowland river Original Research Article
159
Modeling and simulation of self-assembly of arbitrarily shaped ferro-colloidal particles in an external field: A diffuse interface field approach Original Research Article
160
Modeling and simulation of separation process in flotation system
161
Modeling and simulation of severe slugging in air–water pipeline–riser systems
162
Modeling and simulation of severe slugging with mass transfer effects
163
Modeling and simulation of shear resistance of R/C beams using artificial neural network
164
Modeling and Simulation of Sierpinski Pentagon Fractal Antennas
165
Modeling and simulation of single nanobelt SnO2 gas sensors with FET structure
166
Modeling and simulation of single nanobelt SnO2 gas sensors with FET structure
167
Modeling and Simulation of Six-Bed Cyclic Adsorption Process Using in Mercaptan Removal from Natural Gas:
168
Modeling and simulation of soft sensor design for real-time speed estimation, measurement and control of induction motor
169
Modeling and simulation of solar absorption system performance in Beirut
170
Modeling and simulation of solar pond floor heating system
171
Modeling and simulation of solar-powered liquid desiccant regenerator for open absorption cooling cycle
172
Modeling and simulation of solid oxide fuel cell based on the volume–resistance characteristic modeling technique
173
Modeling and simulation of sour gas membrane-absorption system: Influence of operational parameters on species removal
174
Modeling and Simulation of Spherical and Cylindrical Contact Theories for Using in the Biological Nanoparticles Manipulation
175
Modeling and Simulation of Spiral Inductors in Wafer Level Packaged RF/Wireless Chips
176
Modeling and Simulation of Static Var Compensator for Improvement of Voltage Stability in Power System
177
Modeling and Simulation of Substrate Noise in Mixed-Signal Circuits Applied to a Special VCO
178
Modeling and simulation of supercritical extraction columns using computer algebra
179
Modeling and simulation of supersonic gas separations
180
Modeling and simulation of surface reactions and reactive flow of a nitriding process
181
Modeling and simulation of surface roughness
182
Modeling and simulation of the anode in direct ethanol fuels cells
183
Modeling and simulation of the continuous production of an improved solar still coupled with a photovoltaic/thermal solar water heater system Original Research Article
184
Modeling and simulation of the coupled mechanical–electrical response of soft solids
185
Modeling and simulation of the deformation of multi-state hydrogels subjected to electrical stimuli
186
Modeling and simulation of the dynamic behavior of a polymer electrolyte membrane fuel cell
187
Modeling and simulation of the dynamics of a submersible propelled by a fluttering fluid-conveying tail
188
Modeling and simulation of the energy use in an occupied residential building in cold climate
189
MODELING AND SIMULATION OF THE FIRST ABWR FOR VALIDATION OF RETRAN-3D
190
Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation
191
Modeling and simulation of the industrial production of aluminium: the nonlinear approach
192
Modeling and simulation of the large deformation behavior for thermoplastic olefin
193
Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve
194
Modeling and simulation of the market fluctuations by the finite range contact systems
195
Modeling and simulation of the open-end equity mutual fund market in Taiwan by using self-organizing map
196
Modeling and simulation of the power transformer faults and related protective relay behavior
197
Modeling and simulation of the production of hydrogen using hydroelectricity in Venezuela
198
Modeling and simulation of the propagation of harmonics in electric power networks. I. Concepts, models, and simulation techniques
199
Modeling and simulation of the propagation of harmonics in electric power networks. II. Sample systems and examples
200
Modeling and simulation of the soybean oil meal desolventizing–toasting process Original Research Article
201
Modeling and simulation of the supercritical CO2 extraction of vegetable oils
202
Modeling and simulation of the TiC reaction layer growth during active brazing of diamond using DICTRA
203
Modeling and simulation of the Tokyo urban heat island
204
Modeling and simulation of the tool wear in nanometric cutting
205
Modeling and simulation of the transcritical CO2 heat pump system
206
Modeling and simulation of thermal chlorine etching of gallium arsenide with application to real-time feedback control
207
Modeling and simulation of thermocapillary flows using lattice Boltzmann method
208
Modeling and Simulation of Thin Film InP/GaAs Dual-Junction Solar Cells
209
Modeling and simulation of three phase multilevel inverter for grid connected photovoltaic systems
210
Modeling and simulation of titania formation and growth in temporal mixing layers
211
Modeling and Simulation of Titania Synthesis in Two-dimensional Methane–air Flames
212
Modeling and simulation of traffic flow Original Research Article
213
Modeling and Simulation of Transformers
214
Modeling and simulation of transpiration cooling with phase change
215
Modeling and simulation of trickle-bed magnetohydrodynamics in inhomogeneous magnetic fields
216
Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates
217
Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine
218
Modeling and simulation of vibrational breathing-like modes in individual multiwalled carbon nanotubes
219
Modeling and Simulation of Water Softening by Nanofiltration Using Artificial Neural Network
220
Modeling and simulation of wear in revolute clearance joints in multibody systems
221
Modeling and simulation of wetted porous thermal barriers operating under high temperature or high heat flux
222
Modeling and simulation of wind turbine Savonius rotors using artificial neural networks for estimation of the power ratio and torque
223
Modeling and simulation on long-term dynamics of interconnected power system using area COI concept
224
Modeling and simulation on the mass flow distribution in microchannel heat sinks with non-uniform heat flux conditions
225
Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings
226
Modeling and simulation on ultrafine-graining based on multiscale crystal plasticity considering dislocation patterning
227
Modeling and Simulation Research on Dynamics of Missiles with Deflectable Nose Control
228
Modeling and simulation results on a new Compton scattering tomography modality
229
Modeling and simulation results on high sensitivity scattered gamma-ray emission imaging
230
Modeling and simulation strategies in high frequency surface wave radars
231
MODELING AND SIMULATION STUDIES OF HYBRID GASIFIER USING VARIOUS FEEDSTOCKS (FUELS)
232
Modeling and Simulation Study of the Propagation and Defense of Internet E-mail Worms
233
MODELING AND SIMULATION STUDY TO PREDICT THE CEMENT PORTLAND CYCLONE SEPARATOR PERFORMANCE
234
Modeling and simulation to determine the potential energy savings by implementing cold thermal energy storage system in office buildings
235
Modeling and simulation to predict nitrogen deposition influenced by the porosity and the coefficient of inhibition in the coastal area of port Harcourt, Niger delta of Nigeria
236
Modeling and simulation with operator scaling
237
Modeling and simulation, and their validation of three-phase transformers with three legs under DC bias
238
Modeling and simulation-driven development of embedded real-time systems
239
Modeling and simulations of a single-spin measurement using MRFM
240
Modeling and simulations of a single-spin measurement using MRFM
241
Modeling and simulations of carbon nanotubes and their junctions on surfaces
242
Modeling and simulations of drop pinch-off from liquid crystal filaments and the leaky liquid crystal faucet immersed in viscous fluids
243
Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing
244
Modeling and sizing of the heat exchangers of a new supercritical CO2 Brayton power cycle for energy conversion for fusion reactors
245
Modeling and sizing optimization of hybrid photovoltaic/wind power generation system
246
Modeling and sliding-mode control of friction-based object transport using two-mode ultrasonic excitation
247
Modeling and small-signal analysis of controlled on-time boost power-factor-correction circuit
248
Modeling and smiulation of (visco)-plastic behavior of wood under moisture change
249
MODELING AND SOLUTION OF FRICTIONAL CONTACT PROBLEMS USING FINITE ELEMENT METHOD
250
Modeling and solution of two-dimensional input time-delay system
251
Modeling and Solution Procedure for a Preemptive Multi-Objective Multi-Mode Project Scheduling Model in Resource Investment Problems
252
Modeling and Solving a Blood Supply Chain Network: An approach for Collection of Blood
253
Modeling and solving a Crew Assignment Problem in air transportation
254
Modeling and Solving a Multi-objective Location-Routing Problem Considering the Evacuation of Casualties and Homeless People and Fuzzy Paths in Relief Logistics
255
Modeling and solving a real-life assignment problem at universities
256
Modeling and solving a three stage fixed charge transportation problem considering stochastic demand and price
257
Modeling and solving a variant of the mixed-model sequencing problem with work overload minimisation and regularity constraints. An application in Nissan’s Barcelona Plant
258
Modeling and solving building physics problems with FemLab
259
Modeling and Solving Flow Shop Scheduling Problem Considering Worker Resource
260
Modeling and solving multi‑skilled resource‑constrained project scheduling problem with calendars in fuzzy condition
261
Modeling and solving several classes of arc routing problems as traveling salesman problems
262
Modeling and solving the distributed and flexible job shop scheduling problem with WIPs supply planning and bounded processing times
263
Modeling and solving the dynamic patient admission scheduling problem under uncertainty
264
Modeling and solving the dynamic user equilibrium route and departure time choice problem in network with queues
265
Modeling and Solving the Job Shop Scheduling Problem Followed by an Assembly Stage Considering Maintenance Operations and Access Restrictions to Machines
266
Modeling and Solving the Multidepot Vehicle Routing Problem with Time Window by Considering the Flexible end Depot in Each Route
267
Modeling and solving the periodic maintenance problem
268
Modeling and solving the rooted distance-constrained minimum spanning tree problem
269
Modeling and solving the short-term car rental logistics problem
270
Modeling and solving the spatial block scheduling problem in a shipbuilding company
271
Modeling and Solving the Warehouse Location Problem and Vehicle Routing by Considering the Depreciation Depending Cost on the Amount of Load On the Vehicle by Hybrid Genetic Algorithm
272
Modeling and spectroscopic studies of bisphosphonate–bone interactions. The Raman, NMR and crystallographic investigations of Ca–HEDP complexes
273
Modeling and stability analysis of a simulation–stimulation interface for hardware-in-the-loop applications
274
Modeling and Stability Analysis of an Eco-epidemiological Model
275
Modeling and stability analysis of cascade buck converters with N power stages Original Research Article
276
Modeling and stability analysis of state-switched hybrid systems via Differential Petri Nets
277
Modeling and Stability of Lotka-Volterra Prey-Predator System Involving Infectious Disease in Each Population
278
Modeling and Stability of Prey - Predator System Involving Infectious Disease in Each Population with Harvesting of the Prey
279
Modeling and stabilization of a wireless network control system with packet loss and time delay
280
Modeling and state estimation for gas transmission networks
281
Modeling and steady state analysis of the extensible thermoelastic beam
282
Modeling and stress analysis of large format InSb focal plane arrays detector under thermal shock
283
Modeling and study of dynamic performance of a valveless micropump
284
Modeling and supervisory control of a disassembly automation workcell based on blocking topology
285
Modeling and surface observations of arsenic dispersion from a large Cu-smelter in southwestern Europe
286
Modeling and Switching Simulation Tool of SiC-GTO
287
Modeling and synthesis of non-cyclic derivatives of GPI-1046 as potential FKBP ligands with neurotrophic properties
288
Modeling and synthesis of novel tight-binding inhibitors of cytochrome P450 2C9 Original Research Article
289
Modeling and Technical Analysis of Solar Tracking System to Find Optimal Angle for Maximum Power Generation using MOPSO Algorithm
290
Modeling and test of contactless inductive energy transmission Original Research Article
291
Modeling and Testing a New Once-through Air Solar Energy Collector
292
Modeling and testing of a dew collection system Original Research Article
293
Modeling and testing of a field-controllable magnetorheological fluid damper
294
Modeling and testing of a field-controllable magnetorheological fluid damper
295
Modeling and testing of an advanced compact two-phase cooler for electronics cooling
296
Modeling and Testing of Elastic Joints Mobile Mechanical Manipulators
297
Modeling and testing of immunity of computerized equipment to fast electrical transients
298
Modeling and testing of reactive contaminant transport in drinking water pipes: Chlorine response and implications for online contaminant detection Original
299
Modeling and testing of the effect of tillage, cropping and water management practices on nitrate leaching in clay loam soil
300
Modeling and testing smooth structural changes with endogenous regressors
301
Modeling and testing smooth structural changes with endogenous regressors
302
Modeling and testing strain rate-dependent compressive strength of carbon/epoxy composites
303
Modeling and testing the “two-step” decision process of travelers in airport and airline choices
304
Modeling and the adaptive solution of CVD fiber-coating process Original Research Article
305
Modeling and the Gradual Release of Responsibility: What Does It Look Like in the Classroom?
306
Modeling and Thermodynamic Analysis of Municipal Solid Waste Dryer: A Parametric Study
307
Modeling and thermodynamic consistency of solubility data of refrigerants in ionic liquids
308
Modeling and thermo-economic optimization of heat recovery heat exchangers using a multimodal genetic algorithm
309
Modeling and Tracking of Transaction Flow Dynamics for Fault Detection in Complex Systems
310
Modeling and trend analysis of leukemia in children using time series methods
311
Modeling and unified tuning of distributed power flow controller for damping of power system oscillations
312
Modeling and validation of a mechanistic tool (MEFISTO) for the prediction of critical power in BWR fuel assemblies
313
Modeling and validation of a wall-window retrofit system under blast loading
314
Modeling and validation of approach to criticality and axial flux profile experiments at the Missouri S&T Reactor (MSTR)
315
Modeling and validation of business process families
316
Modeling and validation of full fabric targets under ballistic impact
317
Modeling and validation of hitch loading effects on tractor yaw dynamics
318
Modeling and validation of local acrylamide formation in a model food during frying Original Research Article
319
Modeling and validation of multiplex proteo-nucleic self-assemblies monitored by surface plasmon resonance imagery
320
Modeling and validation of pressure propagation in drilling fluids pumped into a closed well
321
Modeling and Validation of Some Combustion Parameters in a VCR Engine Fuelled with Argemone Mexicana Biodiesel-Diesel Blends using RSM
322
Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates
323
Modeling and vector control of planar magnetic levitator
324
Modeling and Velocity Tracking Control for Tape Drive System
325
Modeling and Verification of Double Slope Single Basin Solar Still Using Laboratory and Actual Solar Conditions
326
Modeling and verification of real-time systems based on equations
327
Modeling and Verification of Reconfigurable Actor Families
328
Modeling and verification of ultra-high molecular weight polyethylene wear in multi-directional sliding
329
Modeling and verifying active structural control systems
330
Modeling and verifying choreographed multi-agent-based web service compositions regulated by commitment protocols
331
Modeling and verifying non-linearities in heterodyne displacement interferometry
332
Modeling and verifying probabilistic Multi-Agent Systems using knowledge and social commitments
333
Modeling and vibration control of a plate coupled with piezoelectric material
334
Modeling and visualization for a pearl-quality evaluation simulator
335
Modeling and visualization of knitwear
336
Modeling and visualization of lifecycle building performance assessment
337
Modeling and visualization of polycrystalline thin film growth
338
Modeling and visualization of residential sector energy consumption and greenhouse gas emissions
339
Modeling and Visualization of Tsunamis
340
Modeling and visualizing borehole information on virtual globes using KML
341
Modeling and vulnerability of historical city centers in seismic areas: a case study in Lisbon
342
Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling
343
Modeling and zoning of land subsidence in the southwest of Tehran using artificial neural networks
344
Modeling Animals Behavioral Response by Markov Chain Models for Capture-Recapture Experiments
345
Modeling anisotropic hardening with a stochastic cellular automaton
346
Modeling anisotropic light propagation in a realistic model of the human head
347
Modeling anisotropic Reynolds-stress dissipation in particle- or droplet-laden flows
348
Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals
349
Modeling Annual Benzene, Toluene, NO2, and Soot Concentrations on the Basis of Road Traffic Characteristics
350
Modeling annual energy metabolism rhythms in mammals
351
Modeling annual energy metabolism rhythms in mammals
352
Modeling annual parameters of clear-sky land surface temperature variations and evaluating the impact of cloud cover using time series of Landsat TIR data
353
Modeling anomalous radar propagation using first-order two-state Markov chains
354
Modeling Antarctic ice sheet and climate variations during Marine Isotope Stage 31
355
Modeling antibiotic resistance in hospitals: The impact of minimizing treatment duration
356
Modeling anti-islanding protection devices for photovoltaic systems
357
Modeling antimicrobial contaminant removal in slow sand filtration
358
Modeling antimicrobial effect of different grape pomace and extracts on S. aureus and E. coli in vegetable soup using artificial neural network and fuzzy logic system
359
Modeling antioxidant properties of polyphenols by the TEMPO-initiated reaction of 3,5-di-tert-butylcatechol with dioxygen
360
Modeling antiretroviral drug responses for HIV-1 infected patients using differential equation models
361
Modeling antitumor activity by using a non-linear mixed-effects model
362
Modeling anti-tumor Th1 and Th2 immunity in the rejection of melanoma
363
Modeling approach and plastic deformation analysis of 6063 aluminum alloy during compression at elevated temperatures
364
Modeling approach for emission reduction of O3 precursors in Southern Taiwan
365
Modeling approach of regression orthogonal experiment design for the thermal error compensation of a CNC turning center
366
Modeling approach to a 3D simulation of transport in TEXTOR-DED laminar zone with a finite element method
367
Modeling approach to determine cake buildup and compression in a high-shear membrane bioreactor
368
Modeling approach to estimate the elastic characteristics of workpiece and shrink-fitted die for cold forging
369
Modeling Approach to Periphyton and Nutrient Interaction in a Stream
370
Modeling approach to regime shifts of primary production in shallow coastal ecosystems
371
Modeling approach to regime shifts of primary production in shallow coastal ecosystems
372
Modeling approaches suitable for pushover analyses of RC structural wall buildings
373
Modeling approaches to estimate effective leaf area index from aerial discrete-return LIDAR
374
Modeling Aquatic Mercury Fate in Clear Lake, Calif.
375
Modeling aqueous electrolyte solutions. Part 2. Weak electrolytes
376
Modeling aqueous electrolyte solutions: Part 1. Fully dissociated electrolytes
377
Modeling aqueous heterogeneous photocatalytic degradation of organic pollutants with immobilized TiO2
378
Modeling aqueous perchlorate chemistries with applications to Mars
379
Modeling aqueous two-phase systems: I. Polyethylene glycol and inorganic salts as ATPS former
380
Modeling aqueous two-phase systems: II. Inorganic salts and polyether homo- and copolymers as ATPS former
381
Modeling aqueous two-phase systems: III. Polymers and organic salts as ATPS former
382
Modeling aquifer-system compaction and predicting land subsidence in central Taiwan
383
Modeling architectural design objectives in physically based space planning
384
Modeling Architecture Description Languages Using AML
385
Modeling architectures for VLSI implementations of fuzzy logic systems
386
Modeling Areas Exposed to Radioactive Elements Using Landsat Satellite Images Case Study of Shirkuh Yazd
387
Modeling ARIMA of air temperature of the southern Caspian Sea coasts
388
Modeling arsenic partitioning in coal-fired power plants
389
Modeling arsenite oxidation by chemoautotrophic Thiomonas arsenivorans strain b6 in a packed-bed bioreactor Original Research Article
390
Modeling arterial and left ventricular coupling for non-invasive measurements
391
Modeling arthropod filiform hair motion using the penalty immersed boundary method
392
Modeling Artificial Aeration Kinetics in Ice-Covered Lakes
393
Modeling As(V) removal by a iron oxide impregnated activated carbon using the surface complexation approach
394
Modeling aspects of dual frequency sonochemical reactors
395
Modeling aspects of hydrodesulfurization by molybdenum hydride compounds: Desulfurization of thiophene and benzothiophene and C–S bond cleavage of dibenzothiophene
396
Modeling aspects of low plastic strain amplitude multiaxial cyclic plasticity in conventional and ultrafine grain nickel
397
Modeling aspects of oil–water core–annular flows
398
Modeling asphalt pavement overlay transverse cracks using the genetic operation tree and Levenberg–Marquardt Method
399
Modeling asphaltene precipitation and flow behavior in the processes of CO2 flood for enhanced oil recovery
400
Modeling aspirin and naproxen ternary solubility in supercritical CO2/alcohol with a new Peng–Robinson EOS plus association model
401
Modeling assembly systems with repetitive operations
402
Modeling assessment for re-use of traditional and new types of assessment
403
Modeling assessment of point source NOx emission reductions on ozone air quality in the eastern United States
404
Modeling assessment of transport and deposition patterns of anthropogenic mercury air emissions in the United States and Canada
405
Modeling asset market volatility in a small market:: Accounting for non-synchronous trading effects
406
Modeling Asset Pricing Using Behavioral Variables: Fama-Macbeth Approach
407
Modeling Assets Pricing Using Behavioral Patterns; Fama-French Approach
408
Modeling assisted rational design of novel, potent, and selective pyrrolopyrimidine DPP-4 inhibitors
409
Modeling Association among Demographic Parameters in Analysis of Open Population Capture–Recapture Data
410
Modeling asteroid surfaces from observations and irradiation experiments: The case of 832 Karin
411
Modeling asymmetric volatility in weekly Dutch temperature data
412
Modeling atmosphere emission from magnetic neutron stars Original Research Article
413
Modeling Atmospheric Chemistry: Interactions between Gas-Phase Species and Liquid Cloud/Aerosol Particles
414
Modeling atmospheric concentrations of mercury and deposition to the great lakes
415
Modeling atmospheric PM10 concentrations during severe pollution events in southern Taiwan
416
Modeling atmospheric transport and fate of ammonia in North Carolina—Part I: Evaluation of meteorological and chemical predictions
417
Modeling atmospheric transport and fate of ammonia in North Carolina—Part II: Effect of ammonia emissions on fine particulate matter formation
418
Modeling Atmospheric Turbidity at Zarqa Area Using Meteorological Data
419
Modeling atomic surfaces for the Al–Ni–Co basic decagonal phase
420
Modeling atomic surfaces for the Al–Ni–Co basic decagonal phase
421
Modeling ATP protonation and activity coefficients in NaClaq and KClaq by SIT and Pitzer equations Original Research Article
422
Modeling attendance at Spanish professional football league
423
Modeling Attention-Deficit/Hyperactivity Disorder: A Critical Appraisal of the Cognitive-Energetic Model
424
Modeling attenuation of volatile organic mixtures in the unsaturated zone: codes and usage
425
Modeling Attitude Components Affecting the Acceptance of Functional Dairy Foods among Iranian Urban Consumers
426
Modeling attitude to risk in human decision processes: An application of fuzzy measures
427
Modeling austenite decomposition into ferrite at different cooling rate in low-carbon steel with cellular automaton method Original Research Article
428
Modeling Australias country risk: a country beta approach
429
Modeling Authority Data for Libraries, Archives and Museums: A Project in Progress at AFNOR
430
Modeling auto insurance frequency using K-means and mixture regression
431
Modeling autocorrelation functions of long-range dependent teletraffic series based on optimal approximation in Hilbert space—A further study
432
Modeling autocorrelation functions of self-similar teletraffic in communication networks based on optimal approximation in Hilbert space
433
Modeling automotive safety mechanisms: A Markovian approach
434
Modeling axi-symmetrical joint contact with biphasic cartilage layers—An asymptotic solution
435
Modeling Backbone Flexibility Improves Protein Stability Estimation
436
Modeling Backbone Flexibility to Achieve Sequence Diversity: The Design of Novel α-Helical Ligands for Bcl-xL
437
Modeling bacterial metal toxicity using a surface complexation approach
438
Modeling balance control during sustained waking allows posturographic sleepiness testing
439
Modeling ball impact on the wet mill liners and its application in predicting mill magnetic liner performance
440
Modeling bamboo as a functionally graded material: lessons for the analysis of affordable materials
441
Modeling Banana Xanthomonas Wilt with Protection
442
Modeling barriers of solid waste to energy practices: An Indian perspective
443
Modeling Basel Regulatory in DSGE with Emphasis on Adequacy Regulatory
444
Modeling basic components of solid oxide fuel cells using density functional theory: Bulk and surface properties of CeO2
445
Modeling basic creep in concrete at early-age under compressive and tensile loading
446
Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method
447
Modeling bed-load transport of coarse sediments in the Great Bay Estuary, New Hampshire
448
Modeling Behavior of a Chain of Protein as a Bionanorobot by Changing Environmental Condition
449
Modeling Behavioral Tendencies of the Horse Racing Spectators in Gonbad Kvaoos Spring Competition Based on Planned Behavior Model
450
Modeling Behaviors of Interactive Objects for Real-Time Virtual Environments
451
Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements
452
Modeling Best-Effort and FEC Streaming of Scalable Video in Lossy Network Channels
453
Modeling bimaterial interface cracks using the numerical manifold method
454
Modeling bimolecular reactions and transport in porous media via particle tracking
455
Modeling binding equilibrium in a competitive estrogen receptor binding assay Original Research Article
456
Modeling bioaccumulation in humans using poly-parameter linear free energy relationships (PPLFERS) Original Research Article
457
MODELING BIOCHEMICALLY DRIVEN MINERAL PRECIPITATION IN ANAEROBIC BIOFILMS
458
MODELING BIOCHEMICALLY DRIVEN MINERAL PRECIPITATION IN ANAEROBIC BIOFILMS
459
Modeling biocomplexity e actors, landscapes and alternative futures
460
Modeling biodegradation characteristics of grey water in membrane bioreactor
461
Modeling biofilm and floc diffusion processes based on analytical solution of reaction-diffusion equations
462
Modeling biofilm growth for porous media applications
463
Modeling Biofilms on Gas-Permeable Supports: Concentration and Activity Profiles
464
Modeling Biofilms on Gas-Permeable Supports: Flux Limitations
465
Modeling biogas production from organic fraction of MSW co-digested with MSWI ashes in anaerobic bioreactors
466
Modeling biogenic emissions of isoprene: exploration of model drivers, climate control algorithms, and use of global satellite observations
467
Modeling biogeochemical cycles in Chesapeake Bay with a coupled physical–biological model
468
Modeling biogeochemical impacts of alternative management practices for a row-crop field in Iowa
469
Modeling bio-geochemical interactions in the surface waters of the Gulf of Trieste by three-way principal component analysis (PCA) Original Research Article
470
Modeling bio-geomorphological influences for offshore sandwaves
471
Modeling biological disturbances in LANDIS: a module description and demonstration using spruce budworm
472
Modeling biological disturbances in LANDIS: a module description and demonstration using spruce budworm
473
Modeling biological invasions into periodically fragmented environments
474
Modeling Biological Manufacturing Systems with Bounded-Rational Agents
475
Modeling biological systems with delays in Bio-PEPA
476
Modeling biomass char gasification kinetics for improving prediction of carbon conversion in a fluidized bed gasifier
477
Modeling biomass growth, N-uptake and phenological development of potato crop
478
Modeling biomass particle pyrolysis with temperature-dependent heat of reactions
479
Modeling biomass particle pyrolysis with temperature-dependent heat of reactions
480
Modeling biomass, nitrogen and water dynamics in rice–wheat rotations
481
Modeling biopore effects on root growth and biomass production on soils with pronounced sub-soil clay accumulation
482
Modeling biopore effects on root growth and biomass production on soils with pronounced sub-soil clay accumulation
483
Modeling bird communities using unclassified remote sensing imagery: Effects of the spatial resolution and data period
484
Modeling bird mortality associated with the M/V Citrus oil spill off St. Paul Island, Alaska
485
Modeling bird mortality associated with the M/V Citrus oil spill off St. Paul Island, Alaska
486
Modeling birth weight neonates and associated factors
487
Modeling births at a tertiary health-care facility in Ghana: Box-Jenkins time series approach
488
Modeling black bear population dynamics in a human-dominated stochastic environment
489
Modeling black bear population dynamics in a human-dominated stochastic environment
490
Modeling bladder cancer using a Markov process with multiple absorbing states
491
Modeling blast wave propagation using artificial neural network methods
492
Modeling Bluetooth piconet performance
493
Modeling BOD Removal in Constructed Wetlands with Mixing Cell Method
494
Modeling BOD Removal in Constructed Wetlands with Mixing Cell Method
495
Modeling bond strength of corroded reinforcement without stirrups
496
Modeling boron rejection in pilot- and full-scale reverse osmosis desalination processes
497
Modeling brain electrical activity by an image-based boundary element method
498
Modeling brain tissue volumes over the lifespan: quantitative analysis of postmortem weights and in vivo MR images
499
MODELING BRAIN WAVE DATA BY USING ARTIFICIAL NEURAL NETWORKS
500
Modeling Brand Resilience in Iran’s Handwoven Carpet Industry Using Background Knowledge and Data Mining in Critical Conditions
501
Modeling breakage of monodispersed particles in unconfined beds
502
Modeling breakage rates in mills with impact energy spectra and ultra fast load cell data
503
Modeling breakage rates of coarse particles in ball mills
504
Modeling Breast Acini in Tissue Culture for Detection of Malignant Phenotype Reversion to Non-Malignant Phenotype
505
Modeling Breastmilk Infectivity in HIV-1 Infected Mothers
506
Modeling Breathing-Zone Concentrations of Airborne Contaminants Generated During Compressed Air Spray Painting
507
Modeling Breathing-Zone Concentrations of Airborne Contaminants Generated During Compressed Air Spray Painting
508
Modeling BRF and Radiation Regime of Boreal and Tropical Forest: II. PAR Regime
509
Modeling BRF and Radiation Regime of Boreal and Tropical Forests: I. BRF
510
Modeling Bridge Deterioration Using Case-based Reasoning
511
Modeling brittle–ductile failure transition with meshfree method
512
Modeling broad-scale patterns of avian species richness across the Midwestern United States with measures of satellite image texture
513
Modeling buckling distortion of DP600 overlap joints due to gas metal arc welding and the influence of the mesh density
514
Modeling buffer utilization in cell-based networks
515
Modeling building projects as a basis for change control
516
Modeling Business Cycles with Markov Switching Arma (Ms-Arma) Model: An Application on Iranian Business Cycles
517
Modeling BVOC isoprene emissions based on a GIS and remote sensing database
518
Modeling by Numerical Reduction of Modes for Multivariable Control of an Optical-Fiber Draw Process
519
Modeling by singular value decomposition and the elimination of statistically insignificant coefficients
520
Modeling Caco-2 permeability of drugs using immobilized artificial membrane chromatography and physicochemical descriptors
521
Modeling CaCO3 precipitation in fluidized bed CO2 stripping desalination process Original Research Article
522
Modeling cadmium accumulation in radish, carrot, spinach and cabbage
523
Modeling cadmium and sulfate adsorption by Fe(OH)3/SiO2 mixed oxides
524
Modeling cake filtration under coupled hydraulic, electric and osmotic effects
525
Modeling calcium and water intake in threshed corn grain during thermo-alkaline treatment Original Research Article
526
Modeling calcium dissolution from oil shale ash: Part 1. Ca dissolution during ash washing in a batch reactor
527
Modeling calcium dissolution from oil shale ash: Part 2.: Continuous washing of the ash layer
528
Modeling Calculation of Pay-off Matrix and Analysis of Strategic Behaviors by Nash Equilibrium
529
Modeling Canada yew (Taxus canadensis Marsh.) distribution and abundance in the boreal forest of northeastern Ontario, Canada
530
Modeling cancer detection: tumor size as a source of information on unobservable stages of carcinogenesis
531
Modeling cancer immunotherapy: Assessing the effects of lymphocytes on cancer cell growth and motility
532
Modeling canopy transpiration using time series analysis: A case study illustrating the effect of soil moisture deficit on Pinus taeda
533
Modeling capability of R134a for a critical heat flux of water in a vertical 5 × 5 rod bundle geometry
534
Modeling capability of the artificial neural network (ANN) to predict the effect of the hot deformation parameters on the strength of Al-base metal matrix composites
535
Modeling capability of the artificial neural network (ANN) to predict the effect of the hot deformation parameters on the strength of Al-base metal matrix composites
536
Modeling capacitated location–allocation problem with fuzzy demands
537
Modeling capacitor commutated converters in power system stability studies
538
Modeling capacity fade in lithium-ion cells
539
Modeling capillary pressure using capillary bundles with arbitrary cross-sections obtained from photomicrographs
540
Modeling car dealership credit operations using arena as a business process reengineering demonstration
541
Modeling carbon and silicon cycling in the equatorial Pacific
542
Modeling carbon black/polymer composite sensors
543
Modeling Carbon Cell Quota in Light-limited Phytoplankton
544
Modeling carbon cycling on disturbed landscapes
545
Modeling carbon cycling on disturbed landscapes
546
Modeling carbon dioxide emissions with a system of differential equations Original Research Article
547
Modeling carbon dioxide sequestration in saline aquifers: Significance of elevated pressures and salinities
548
Modeling carbon monoxide dehydrogenase/acetyl-CoA synthase (CODH/ACS): a trinuclear nickel complex employing deprotonated amides and bridging thiolates
549
Modeling carbon nanotube-based mass sensors using axial vibration and nonlocal elasticity
550
Modeling carbon sequestration in afforestation, agroforestry and forest management projects: the CO2FIX V.2 approach
551
Modeling carbon sequestration in afforestation, agroforestry and forest management projects: the CO2FIX V.2 approach
552
Modeling carbon sequestration under zero tillage at the regional scale. I. The effect of soil erosion
553
Modeling carbon sequestration under zero tillage at the regional scale. I. The effect of soil erosion
554
Modeling carbon sequestration under zero-tillage at the regional scale. II. The influence of crop rotation and soil type
555
Modeling carbon sequestration under zero-tillage at the regional scale. II. The influence of crop rotation and soil type
556
Modeling carbonation for corrosion risk prediction of concrete structures
557
Modeling carcinogenesis under a time-changing exposure
558
Modeling cardiac mechano-electrical feedback using reaction-diffusion-mechanics systems
559
Modeling cardiac pacemakers with relaxation oscillators
560
Modeling carrying capacity for national parks
561
Modeling cascading failures in complex networks based on radiate circle
562
Modeling cascading failures in congested complex networks
563
Modeling Caspian Sea water level oscillations under different scenarios of increasing atmospheric carbon dioxide concentrations
564
Modeling cast IN-738 superalloy gas tungsten arc welds Original Research Article
565
Modeling casting dimensions: effect of wax rheology and interfacial heat transfer
566
Modeling catalyst deactivation during hydrocracking of atmospheric residue by using the continuous kinetic lumping model
567
Modeling catalytic membrane reactors using an adaptive wavelet-based collocation method
568
Modeling catalytic reduction of NO by ammonia over V2O5
569
Modeling Catalytic Trickle-Bed and Upflow Packed-Bed Reactors for Wet Air Oxidation of Phenol with Phase Change
570
Modeling causal and interfering conditions in corruption from auditing perspective using Grounded theory
571
Modeling Causal Factors of Occupational Accidents in Chemical Industries: A 10-Year Field Study in Iran
572
Modeling cavitation in a rapidly changing pressure field – Application to a small ultrasonic horn
573
Modeling cavitation in a rapidly changing pressure field – Application to a small ultrasonic horn
574
Modeling Cell Signaling Networks
575
Modeling Cells Adds Up
576
Modeling certainty equivalents for imprecise gambles
577
Modeling CFB biomass pyrolysis reactors
578
Modeling chairs and occupants to closely approximate the sound absorption of occupied full scale theatre chairs
579
Modeling challenges in ceramic materials innovations
580
Modeling change in soil compaction due to agricultural traffic as function of soil water content
581
MODELING CHANGES IN DIRECT REDUCTION OF IRON IN THE BLAST-FURNACE PROCESS
582
Modeling changes in farming systems with the adoption of improved fallows in southern Mali
583
Modeling changes in health-related compounds of tomato juice treated by high-intensity pulsed electric fields Original Research Article
584
Modeling changes in milled rice (Oryza sativa L.) kernel dimensions during soaking by image analysis Original Research Article
585
Modeling changes in soil organic matter in Amazon forest to pasture conversion with the Century model
586
Modeling changes in the coastal ecosystem of the Pearl River Estuary from 1981 to 1998
587
Modeling changes in the coastal ecosystem of the Pearl River Estuary from 1981 to 1998
588
Modeling changes of fractal pore structures in coal pyrolysis
589
Modeling changes of headspace gas concentrations to describe the respiration of fresh-cut melon under low or superatmospheric oxygen atmospheres Original Research Article
590
Modeling changes to the hydrodynamic characteristics of agglomerated copper tailings
591
Modeling channel morphodynamic response to variations in large wood: Implications for stream rehabilitation in degraded watersheds
592
Modeling chaotic two-dimensional mapping with fuzzy-neuron networks
593
Modeling char conversion under suspension fired conditions in O2/N2 and O2/CO2 atmospheres
594
Modeling char oxidation behavior under Zone II burning conditions at elevated pressures
595
Modeling Characteristics of Harmonic Currents Generated by High-Speed Railway Traction Drive Converters
596
Modeling charge transfer and induction in gas–solid fluidized beds
597
Modeling charge transfer in a PEM fuel cell using solar hydrogen
598
Modeling charge transfer inefficiency in the Chandra Advanced CCD Imaging Spectrometer
599
Modeling charge transfer inefficiency in the Chandra Advanced CCD Imaging Spectrometer
600
Modeling charge transport in composite solar cells
601
Modeling charge transport properties of cyano-substituted PPV
602
Modeling charge-carrier transport and generation–recombination mechanisms in p+n+ a-Si tunnel junctions
603
Modeling Charpy impact behavior of Al6061/SiCp laminated nanocomposites by genetic programming
604
Modeling Charpy impact energy of functionally graded steel based on the strain gradient plasticity theory and modified stress–strain curve data
605
Modeling chatter in peripheral milling using the Semi Discretization Method
606
Modeling chemical and physical processes of wood and biomass pyrolysis
607
Modeling chemical growth processes in Titanʹs atmosphere 2. Theoretical study of reactions between C2H and ethene, propene, 1-butene, 2-butene, isobutene, trimethylethene, and tetramethylethene
608
Modeling chemical reactions by forced limit-cycle oscillator: synchronization phenomena and transition to chaos
609
Modeling chemical reactivity in emulsions
610
Modeling cherry orchard evapotranspiration based on an improved dual-source model
611
Modeling children’s mathematical gift by neural networks and logistic regression
612
Modeling Chinese cryospheric change by using GIS technology
613
Modeling chondrule melting using a resizing box_tree code Original Research Article
614
Modeling chromatographic columns: Non-equilibrium packed-bed adsorption with non-linear adsorption isotherms
615
Modeling chromatographic dispersion: A comparison of popular equations
616
Modeling churn using customer lifetime value
617
Modeling circulating fluidized bed biomass gasifiers. A pseudo-rigorous model for stationary state
618
Modeling circulating fluidized bed biomass gasifiers. Results from a pseudo-rigorous 1-dimensional model for stationary state
619
Modeling circulating fluidized bed downers
620
Modeling circulation function in agroecosystems
621
Modeling circulation function in agroecosystems
622
Modeling circumstellar envelope with advanced numerical codes
623
Modeling citation behavior in Management Science journals
624
Modeling Cl− Concentration and δ37Cl Profiles in Porewater Across a 250m-thick Indurated Argillite at the Tournemire URL (France)
625
Modeling claim exceedances over thresholds
626
Modeling classification in small-diameter hydrocyclones under variable rheological conditions
627
Modeling clear weather day solar irradiance in Baghdad, Iraq
628
Modeling client profiles for order promising and delivery
629
Modeling cliff erosion using negative power law scaling of rockfalls
630
Modeling climate change impacts on phenology and population dynamics of migratory marine species
631
Modeling climate change impacts on phenology and population dynamics of migratory marine species
632
Modeling climate change impacts on the thermal dynamics of polymictic Oneida Lake, New York, United States
633
Modeling climate change impacts on the thermal dynamics of polymictic Oneida Lake, New York, United States
634
Modeling climate change impacts on water trading Original Research Article
635
Modeling climate change mitigation from alternative methods of charcoal production in Kenya
636
Modeling Climate Variables of Rivers Basin using Time Series Analysis (Case Study: Karkheh River Basin at Iran)
637
Modeling closed-loop mechanisms in robots for purposes of calibration
638
Modeling cloud microphysics using a two-moments hybrid bulk/bin scheme for use in Titan’s climate models: Application to the annual and diurnal cycles
639
Modeling Clustered Ordered Categorical Data: A Survey
640
Modeling CO2 and CH4 flux changes in pristine peatlands of Finland under changing climate conditions
641
Modeling CO2 and CH4 flux changes in pristine peatlands of Finland under changing climate conditions
642
Modeling CO2 and H2S solubilities in aqueous alkanolamine solutions via an extension of the Cubic-Two-State equation of state
643
Modeling CO2 and water vapor exchange of a temperate broadleaved forest across hourly to decadal time scales
644
Modeling CO2 and water vapor exchange of a temperate broadleaved forest across hourly to decadal time scales
645
Modeling CO2 solubility and transport in poly(ethylene terephthalate) above and below the glass transition
646
Modeling CO2–brine–rock interactions in the Knox Group: Implications of a deep carbon storage field test in western Kentucky
647
Modeling coagulation kinetics incorporating fractal theories: a fractal rectilinear approach
648
Modeling coagulation kinetics incorporating fractal theories: comparison with observed data
649
Modeling coagulation of externally mixed particles: Sectional approach for both size and chemical composition
650
Modeling coalescence in multiple-particle systems
651
Modeling coastal current transport in the Gulf of Maine
652
modeling cobalt ion adsorption with synthesized magnetite bentonite (smb) nano-absorbent: by ccd
653
Modeling coccolithophores in the global oceans
654
Modeling COD, N and P removal in a full-scale wwtp Haarlem Waarderpolder
655
Modeling coevolution and sympatric speciation of flowers and pollinators
656
Modeling Cognitive Processes in Information Seeking: From Popper to Pask
657
Modeling coherence decay in broad band triplet interaction
658
Modeling cohesive clay coast evolution and response to climate change
659
Modeling cohesive crack growth via a truly-mixed formulation
660
Modeling cohesive energy and melting temperature of nanocrystals Original Research Article
661
Modeling cold supply chain environment of organized farm products retailing in India
662
Modeling cold tolerance in the mountain pine beetle, Dendroctonus ponderosae
663
Modeling collaboration formation with a game theory approach
664
Modeling collective dynamics of particulate systems under time-varying operating conditions based on Markov chains
665
Modeling college major choices using elicited measures of expectations and counterfactuals
666
Modeling college major choices using elicited measures of expectations and counterfactuals
667
Modeling collision probability for Earth-impactor 2008 TC3
668
Modeling colloid transport for performance assessment
669
Modeling colloid-facilitated transport of multi-species contaminants in unsaturated porous media
670
Modeling Color Properties of Tiled Displays
671
Modeling colorant leakage techniques: Application to endodontics
672
Modeling colorimetric characteristics of ON–OFF behavior of photochromic dyes based on bis-azospiropyrans
673
Modeling combined-cycle power plant for simulation of frequency excursions
674
Modeling combustion of straw–bitumen pellets in a fluidized bed
675
MODELING COMETABOLIC BIODEGRADATION OF ORGANIC COMPOUNDS IN BIOFILMS
676
MODELING COMETABOLIC BIODEGRADATION OF ORGANIC COMPOUNDS IN BIOFILMS
677
Modeling commercial vehicle empty trips with a first order trip chain model
678
Modeling Communication Networks With Hybrid Systems
679
Modeling Community-Based Tourism in the Rural Areas of the Mountain Villages of Nowshahr City with the Grounded Theory Approach
680
Modeling Community-level Effects on Preterm Birth
681
Modeling compaction in agricultural soils
682
Modeling compartmentalized lagoon systems under cyclic operation
683
Modeling compensated root water and nutrient uptake
684
Modeling compensated root water and nutrient uptake
685
Modeling Competency Management for Organizational Agility at Islamic Azad University of Tehran
686
Modeling competition between plants using an Individual Based Model: Methods and effects on the growth of two species with contrasted growth forms
687
Modeling competition between plants using an Individual Based Model: Methods and effects on the growth of two species with contrasted growth forms
688
Modeling competition in transmission expansion
689
Modeling competition, dispersal and effects of disturbance in the dynamics of a grassland community using a cellular automaton model
690
Modeling competition, dispersal and effects of disturbance in the dynamics of a grassland community using a cellular automaton model
691
Modeling competitive adsorption of molybdate, sulfate, selenate, and selenite using a Freundlich-type multi-component isotherm
692
Modeling competitive continuous and discontinuous precipitation
693
Modeling competitive cytokine adsorption dynamics within hemoadsorption beads used to treat sepsis
694
Modeling competitive inhibition effects during biodegradation of BTEX mixtures
695
Modeling competitive metal sorption in a mineral soil
696
Modeling competitive multi-modal transit services: a nested logit approach
697
Modeling completeness versus consistency tradeoffs in information decision contexts
698
Modeling complex boundaries using an external force field on fixed Cartesian grids in large-eddy simulations
699
Modeling complex dispersed energy and clean water systems for the US/Mexico border
700
Modeling complex ecological systems: an introduction
701
Modeling complex ecological systems: an introduction
702
Modeling complex human–environment interactions: the Grand Canyon river trip simulator
703
Modeling complex human–environment interactions: the Grand Canyon river trip simulator
704
Modeling complex multi-component reactive-transport systems: towards a simulation environment based on the concept of a Knowledge Base
705
Modeling complex networks with self-similar outerplanar unclustered graphs
706
Modeling Complex Neutrophil Dynamics in the Grey Collie
707
Modeling complex nonlinear responses of shallow lakes to fish and hydrology using artificial neural networks
708
Modeling complex nonlinear responses of shallow lakes to fish and hydrology using artificial neural networks
709
Modeling complex packing structures and their thermal properties
710
Modeling complex spoken dialog
711
Modeling complex wells with the multi-scale finite-volume method
712
Modeling complexes of H2 molecules in fullerenes
713
Modeling complexity in biology
714
Modeling compliance to environmental regulation: Evidence from manufacturing industries
715
Modeling component connectors in Reo by constraint automata
716
Modeling compressive strength of EPS lightweight concrete using regression, neural network and ANFIS
717
Modeling computer virus prevalence with a susceptible-infected-susceptible model with reintroduction
718
MODELING COMPUTER-BASED REAL-TIME SYSTEMS: WHICH VIEWS DO WE NEED?
719
Modeling concentration polarization in reverse osmosis processes Original Research Article
720
Modeling concept for the infrastructure of autonomous logistic processes
721
Modeling concrete thermal expansion based on packing density theory
722
Modeling concrete under severe conditions as a multiphase material
723
Modeling condensation heat transfer on a horizontal finned tube in the presence of noncondensable gases
724
Modeling condensation heat transfer on a horizontal finned tube in the presence of noncondensable gases Original Research Article
725
Modeling condensed-phase chemistry through molecular dynamics simulation
726
Modeling Conductive Heat Transfer and Process Uniformity during Batch High-Pressure Processing of Foods
727
Modeling Conductive Heat Transfer during High-Pressure Thawing Processes; Determination of Latent Heat as a Function of Pressure
728
Modeling confined pressure changes inducing anomalous electromagnetic fields related with earthquakes
729
Modeling connectivity of black bears in a desert sky island archipelago
730
Modeling consequences of straw residues export on soil organic carbon
731
Modeling consequences of straw residues export on soil organic carbon
732
Modeling consideration sets and brand choice using artificial neural networks
733
Modeling consolidation and fluid flow in sedimentary basins
734
Modeling constitutive relationship of Ti17 titanium alloy with lamellar starting microstructure
735
Modeling constitutive relationship of Ti40 alloy using artificial neural network
736
Modeling Construction Operations with RISim
737
Modeling construction time in Spanish building projects
738
Modeling consumer acceptance probabilities
739
Modeling Consumer Health Plan Choice Behavior To Improve Customer Value and Health Plan Market Share
740
Modeling consumer-based brand equity for multinational hotel brands – When hosts become guests
741
Modeling consumption patterns in the attribute space: Theory and evidence of hybrid behavior
742
Modeling contact interactions between triangulated rounded bodies for the discrete element method
743
Modeling contacts of ionic polymer metal composites based tactile sensors
744
Modeling contaminant intrusion in water distribution networks: A new similarity-based DST method
745
Modeling contaminant transport in a two-aquifer system with an intervening aquitard
746
Modeling content delivery networks and their performance
747
Modeling context in mobile distributed systems with the UML
748
Modeling continuous aqueous two-phase systems for control purposes
749
Modeling continuous cultures of microalgae colimited by nitrogen and phosphorus
750
Modeling continuous-time processes via input-to-state filters
751
Modeling contractorsʹ project selection and markup decisions influenced by eminence
752
Modeling control measure effects to reduce indoor transmission of pandemic H1N1 2009 virus
753
Modeling controls of phytoplankton production in the southwest Pacific sector of the Southern Ocean
754
Modeling convergence: Towards a reconstruction of the history of Quechuan–Aymaran interaction
755
Modeling co-occurrence of northern spotted and barred owls: Accounting for detection probability differences
756
Modeling cooking of chicken meat in industrial tunnel ovens with the Flory–Rehner theory
757
Modeling cooling of ready-to-eat meats by 3D finite element analysis: Validation in meat processing facilities Original Research Article
758
Modeling cooling tower fouling in helical-rib tubes based on Von-Karman analogy
759
Modeling cooperation among self-interested agents: a critique
760
Modeling Cooperation between Nodes in Wireless Networks by APD Game
761
Modeling cooperation in multi-agent communities
762
Modeling cooperation on a class of distribution problems
763
Modeling copper partitioning in surface waters
764
Modeling core–shell nanoparticle formation using three reactive microemulsions
765
Modeling corium jet breakup in water pool and application to ex-vessel fuel–coolant interaction analyses
766
Modeling corporate entrepreneurship as rent-seeking competition
767
Modeling correlated human dynamics with temporal preference
768
Modeling correlated market and credit risk in fixed income portfolios
769
Modeling correlated traffic with a generalized IPP
770
Modeling correlations in web traces and implications for designing replacement policies
771
Modeling corroded section configuration of steel bar in concrete structure
772
Modeling corrosion currents of reinforced concrete using ANN
773
Modeling coseismic displacements resulting from SAR interferometry and GPS measurements during the 1997 Umbria-Marche seismic sequence
774
Modeling cosmic ray ionization in an oblate planetary ionosphere Original Research Article
775
Modeling COSMO-SkyMed measurements of precipitating clouds over the sea using simultaneous weather radar observations
776
Modeling cotton (Gossypium spp.) leaves and canopy using computer aided geometric design (CAGD)
777
Modeling cotton (Gossypium spp.) leaves and canopy using computer aided geometric design (CAGD)
778
Modeling cougar habitat in the Northeastern United States
779
Modeling cougar habitat in the Northeastern United States
780
Modeling country risk ratings using partial orders
781
Modeling Coupled Chemical and Isotopic Equilibration Rates
782
Modeling coupled heat and mass transport applied to the hydrothermal system of the Upper Harz Mountains (Germany)
783
Modeling coupled processes of non-steady seepage flow and non-linear deformation for a concrete-faced rockfill dam
784
Modeling coupled thermal–hydrological–chemical processes in the unsaturated fractured rock of Yucca Mountain, Nevada: Heterogeneity and seepage
785
Modeling covariance matrices via partial autocorrelations
786
Modeling Cover-Cracking due to Reinforcement Corrosion in RC Structures
787
Modeling Cr(VI) Reduction and Phenol Degradation in a Coculture Biofilm Reactor
788
Modeling crack closure and damage in variable amplitude fatigue using smooth specimen fatigue test data
789
Modeling crack development in reinforced concrete structures under service loading
790
Modeling crack in orthotropic media using a coupled finite element and partition of unity methods
791
Modeling crack propagation for advanced 4-point bending testing of metal–dielectric thin film stacks
792
Modeling cracking behavior of rock mass containing inclusions using the enriched numerical manifold method
793
Modeling crash frequencies by transportation mode using micro/macro level variables
794
Modeling crash outcome probabilities at rural intersections: Application of hierarchical binomial logistic models
795
Modeling crashes involving pedestrians and motorized traffic
796
Modeling crash-flow-density and crash-flow-V/C ratio relationships for rural and urban freeway segments
797
Modeling crater populations on Venus and Titan
798
Modeling Credit Card Borrowing: A Comparison of Type I and Type II Tobit Approaches
799
Modeling creep behavior of niobium silicide in-situ composites
800
Modeling creep behavior of niobium silicide in-situ composites
801
Modeling creep behavior of niobium silicide in-situ composites
802
Modeling crime and the law enforcement system
803
Modeling crisis decision-making for children in state custody
804
Modeling Critical Flow through Choke for a Gas-condensate Reservoir Based on Drill Stem Test Data
805
Modeling critical overloading in 1–3, 6, and 10 kV power cables
806
Modeling critical overloading in 6–10/0.4 kV, 250–630 kVA power, oil-immersed transformers
807
Modeling Critical Resource Allocation and Sharing under Pandemic Situation
808
Modeling crop cultivation pattern based on virtual water trade: evidence from Marvdasht in southern Iran
809
Modeling crop regional production using positive mathematical programming
810
Modeling cropping strategies to improve human nutrition in Uganda
811
Modeling cross-price effects on inter-category dynamics: The case of three computing platforms
812
Modeling Crosstalk Effects in CNT Bus Architectures
813
Modeling crowd dynamics by the mean-field limit approach
814
Modeling crowd evacuation of a building based on seven methodological approaches
815
Modeling crown temperature of winter sugar beet and its application in risk assessment for frost killing in Central Europe
816
Modeling Cryptosporidium parvum oocyst inactivation and bromate in a flow-through ozone contactor treating natural water
817
Modeling crystallization processes: transformation diagrams Original Research Article
818
Modeling crystallographic texture evolution with finite elements over neo-Eulerian orientation spaces Original Research Article
819
Modeling Cu precipitation in tempered martensitic steels
820
Modeling Cumulative Effects of Nutrient Surpluses in Agriculture: A Dynamic Approach to Material Balance Accounting
821
Modeling current transport in organic light-emitting devices (OLEDs)
822
Modeling curvature effects in diffusion flames using a laminar flamelet model
823
Modeling customer impatience in a newsboy problem with time-sensitive shortages
824
Modeling Customer Relationship Management Pattern Using Human Factors Approach in the Hospitals of Tehran University of Medical Sciences
825
Modeling customer satisfaction in cellular phone services
826
Modeling customer value perceptions in cross-cultural business markets
827
Modeling CVD in Human Pluripotent Cells by Genome Editing
828
Modeling CVD synthesis of carbon nanotubes: Nanoparticle formation from ferrocene Original Research Article
829
Modeling cyclic ratcheting based fatigue life of HSLA steels using crystal plasticity FEM simulations and experiments
830
Modeling cyclic recession of cohesive clay coasts: Effects of wave erosion and bluff stability
831
Modeling cyclic voltammograms of simultaneous electron and ion transfer reactions at a conic film three-phase electrode
832
Modeling D retention in W under D ions and neutrons irradiation
833
Modeling daily discharge responses of a large karstic aquifer using soft computing methods: Artificial neural network and neuro-fuzzy
834
Modeling daily realized futures volatility with singular spectrum analysis
835
Modeling daily soil water dynamics during vertical drainage using the incoming flow concept
836
Modeling damage in polymeric composites
837
Modeling damage in silicon carbide due to an impact stress below the HEL
838
MODELING DAMPED MASS-SPRING SYSTEM IN MATLAB SIMULINK
839
Modeling dark fermentation for biohydrogen production: ADM1-based model vs. Gompertz model
840
Modeling dark haloes in early-type galaxies: stellar kinematics at large radii
841
Modeling data envelopment analysis (DEA) efficient location/allocation decisions
842
Modeling data envelopment analysis by chance method in hybrid uncertain environments Original Research Article
843
Modeling data revisions: Measurement error and dynamics of “true” values
844
Modeling data uncertainty on electric load forecasting based on Type-2 fuzzy logic set theory
845
Modeling data uncertainty on electric load forecasting based on Type-2 fuzzy logic set theory
846
Modeling data with multiple time dimensions
847
Modeling database system availability under network partitioning
848
Modeling daylight on inclined surfaces for applications to daylight conscious architecture
849
Modeling dead wood in Fennoscandian old-growth forests dominated by Norway spruce
850
Modeling Debonding Failure in FRP Flexurally Strengthened RC Members Using a Local Deformation Model
851
Modeling decadal timescale interactions between surface water and ground water in the central Everglades, Florida, USA
852
Modeling decohesion of a top-coat from a thermally-growing oxide in a thermal barrier coating
853
Modeling Deep Burn TRISO particle nuclear fuel
854
Modeling deep-fat frying for control of acrylamide reaction in plantain Original Research Article
855
Modeling defect production in silica glass due to energetic recoils using molecular dynamics simulations
856
Modeling defective interfering virus therapy for AIDS: Conditions for DIV survival
857
MODELING DEFICIT IRRIGATION EFFECTS ON MAIZE TO IMPROVE WATER USE EFFICIENCY
858
Modeling deformation banding in dense and loose fluid-saturated sands
859
Modeling deformation behavior of polymers with viscoplasticity theory based on overstress
860
Modeling degradation of terrace scarps in Grand Teton National Park, USA
861
Modeling delamination as a strong discontinuity with the material point method Original Research Article
862
Modeling delamination growth in laminated composites
863
Modeling delamination in composite structures by incorporating the Fermi–Dirac distribution function and hybrid damage indicators
864
Modeling delay in diagnosis of NF: under reportincg, incidence and prevalence estimates
865
Modeling demand for coal in India: vector autoregressive models with cointegrated variables
866
Modeling demand rate and imperfect proof-test and analysis of their effect on system safety
867
Modeling demand rate and imperfect proof-test and analysis of their effect on system safety
868
Modeling dendrite growth in undercooled concentrated multi-component alloys Original Research Article
869
Modeling dendritic growth of a binary alloy
870
Modeling dendritic structure and mechanical properties of Zn–Al alloys as a function of solidification conditions
871
Modeling dendritic structure and mechanical properties of Zn–Al alloys as a function of solidification conditions
872
Modeling dengue fever risk based on socioeconomic parameters, nationality and age groups: GIS and remote sensing based case study Original Research Article
873
Modeling dense water mass formation and winter circulation in the northern and central Adriatic Sea
874
Modeling densification during sinter-forging of yttria-partially-stabilized zirconia
875
Modeling densification during sinter-forging of yttria-partially-stabilized zirconia
876
Modeling density currents in a typical tributary of the Three Gorges Reservoir, China
877
Modeling density currents in a typical tributary of the Three Gorges Reservoir, China
878
Modeling density dependence in heterogeneous landscapes: Dispersal as a case study
879
Modeling dependence structure between stock market volatility and sukuk yields: A nonlinear study in the case of Saudi Arabia
880
Modeling dependence with copulas: a useful tool for field development decision process
881
Modeling deposition by wave-supported gravity flows on the Po River prodelta: From seasonal floods to prograding clinoforms
882
Modeling deposition of particles in typical horizontal ventilation duct flows
883
Modeling deposition of particles in vertical square ventilation duct flows
884
Modeling depth distributions of overland flows
885
Modeling depth-averaged velocity and bed shear stress in compound channels with emergent and submerged vegetation
886
Modeling depth-variant and domain-specific sorption and biodegradation in dual-permeability media
887
Modeling descending carbon dioxide injections in the ocean
888
Modeling description and spectroscopic evidence of surface acid–base properties of natural illites
889
Modeling design and analysis of multi-layer solid oxide fuel cells
890
Modeling design as situated and distributed process
891
Modeling Design/Coding Factors That Drive Maintainability of Software Systems
892
Modeling detection of incidents by drivers
893
Modeling detector response for neutron depth profiling
894
Modeling deterioration of cementitious materials exposed to calcium leaching in non-isothermal conditions
895
Modeling detonation in liquid explosives: The effect of the inter-component transfer hypothesis on chemical lengths and critical diameters
896
Modeling detonation waves in nitromethane
897
Modeling development of residual stresses in thermal spray coatings
898
Modeling developmental cognitive neuroscience
899
Modeling developmental data using U-shaped threshold dose-response curves
900
Modeling developmental transitions on the balance scale task
901
Modeling devices with nonlinear Voltage-current Characteristics for harmonic studies
902
Modeling diachronic change in the third person singular: a multifactorial, verb- and author-specific exploratory approach
903
Modeling dialup internet access: an examination of user-to-modem ratios, blocking probability, and capacity planning in a modem pool
904
Modeling diarrhea disease in children less than 5 years old
905
Modeling diatomic potential energy curves through the generalized exponential function
906
Modeling dichloroacetic acid formation from the reaction of monochloramine with natural organic matter
907
Modeling dichotomous item responses with free-knot splines
908
Modeling diesel particulate emissions with neural networks
909
Modeling differences in the vibration response characteristics of the human body
910
Modeling different decision strategies in a time tabled multimodal route planning by integrating the quantifierguided OWA operators, fuzzy AHP weighting method and TOPSIS
911
Modeling differential scanning calorimetry of thermally degrading thermoplastics
912
Modeling differential scanning calorimetry of thermally degrading thermoplastics
913
Modeling differentiation of cognitive abilities within the higher-order factor model using moderated factor analysis
914
Modeling diffuse pollution loading into a Mediterranean lagoon: Development and application of an integrated surface–subsurface model tool
915
Modeling diffuse pollution loading into a Mediterranean lagoon: Development and application of an integrated surface–subsurface model tool
916
Modeling diffusion advection in the mass transfer of water vapor through martian regolith
917
Modeling diffusion and adsorption in compacted bentonite: a critical review
918
Modeling diffusion and gas–oil mass transfer in fractured reservoirs
919
Modeling diffusion coefficients in binary mixtures
920
Modeling diffusion coefficients in binary mixtures of polar and non-polar compounds
921
Modeling diffusion in random heterogeneous media: Data-driven models, stochastic collocation and the variational multiscale method
922
Modeling diffusion in white matter in the brain: A composite porous medium
923
Modeling diffusion of an alkaline plume in a clay barrier
924
Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model
925
Modeling diffusional coarsening in eutectic tin/lead solders: a quantitative approach
926
Modeling diffusion-control in the cure kinetics of epoxy-amine thermoset resins: An approach based on configurational entropy
927
Modeling diffusion-governed solidification of ternary alloys – Part 1: Coupling solidification kinetics with thermodynamics
928
Modeling diffusion-governed solidification of ternary alloys – Part 2: Macroscopic transport phenomena and macrosegregation
929
Modeling digestibility dynamics in leaf segments in a grass: a new approach to forage quality changes in a growing plant
930
Modeling Digital Investment Satisfaction Based on Accounting Information, Information Asymmetry and Individual Values
931
Modeling dilute and dense granular flows in a high shear granulator
932
Modeling diminishing returns in project resource planning
933
Modeling direct and indirect effect of long range transport on atmospheric PM2.5 levels
934
Modeling direct positive feedback between predators and prey
935
Modeling direct steam generation in solar collectors with multiphase CFD
936
Modeling directed design and biological evaluation of quinazolinones as non-peptidic growth hormone secretagogues
937
Modeling directional forest reflectance with the hybrid type forest reflectance model FRT
938
Modeling directional–hemispherical reflectance and transmittance of fresh and dry leaves from 0.4 μm to 5.7 μm with the PROSPECT-VISIR model
939
Modeling discharge capacity of labyrinth weirs through a learning machine approach
940
Modeling discharge coefficient of triangular plan form weirs using extreme learning machine
941
Modeling discharge–sediment relationship using neural networks with artificial bee colony algorithm
942
Modeling discharge-suspended sediment relationship using least square support vector machine
943
Modeling Discoloration in Potable Water Distribution Systems
944
Modeling discrete choice behavior using concepts from fuzzy set theory, approximate reasoning and neural networks
945
Modeling discrete event scalable network systems
946
Modeling discrete gas bubble formation and mobilization during subsurface heating of contaminated zones
947
Modeling disease dynamics and survivor functions by sanogenesis curves
948
Modeling dislocation by coupling Peierls–Nabarro and element-free Galerkin methods Original Research Article
949
Modeling dislocation creep as a near-field material transfer process during spherical pluton expansion: implications for strain rates and their preservation in pluton aureoles
950
Modeling dislocation cutting the precipitate in nickel-based single crystal superalloy via the discrete dislocation dynamics with SISF dissociation scheme
951
Modeling dislocation nucleation strengths in pristine metallic nanowires under experimental conditions Original Research Article
952
Modeling dislocation storage rates and mean free paths in face-centered cubic crystals Original Research Article
953
Modeling dislocation structure development and creep–swelling coupling in neutron irradiated stainless steel
954
Modeling dislocation—grain boundary interactions through gradient plasticity and nanoindentation
955
Modeling dislocations and disclinations with finite micropolar elastoplasticity
956
Modeling dispersal of the plateau pika (Ochotona curzoniae) using a cellular automata model
957
Modeling dispersal of the plateau pika (Ochotona curzoniae) using a cellular automata model
958
Modeling dispersion at distances of meters from urban sources
959
Modeling dispersion from near-surface tracer releases at Cape Canaveral, Florida
960
Modeling dispersion in three-dimensional heterogeneous fractured media at Yucca Mountain
961
Modeling dispersion of brine waste discharges from a coastal desalination plant Original Research Article
962
MODELING DISPERSIVE MIXING OF RUBBER COMPOUNDS
963
MODELING DISPERSIVE MIXING OF RUBBER COMPOUNDS
964
Modeling displacive–diffusional coupled dislocation shearing of γ′ precipitates in Ni-base superalloys Original Research Article
965
Modeling dissimilar components of the eclipsing binary EK Cep: - Does the primary star have a rapidly rotating core?
966
Modeling dissolution and spreading of Bi–Sn alloy drops on a Bi substrate Original Research Article
967
Modeling dissolution and volatilization of LNAPL sources migrating on the groundwater table
968
Modeling distortional shear in thin-walled elastic beams
969
Modeling distributed concept representation in Hopfield neural networks
970
Modeling distributed energy resource dynamics on the transmission system
971
Modeling distributed software defect removal effectiveness in the presence of code churn
972
Modeling distribution of Amazonian tree species and diversity using remote sensing measurements
973
Modeling distribution of temporal sampling errors in area-time-averaged rainfall estimates
974
Modeling distributions of flying insects: Effective attraction radius of pheromone in two and three dimensions
975
Modeling disturbance and succession in forest landscapes using LANDIS: introduction
976
Modeling disturbance and succession in forest landscapes using LANDIS: introduction
977
Modeling diurnal land temperature cycles over Los Angeles using downscaled GOES imagery
978
Modeling DNA Mutation and Recombination for Directed Evolution Experiments
979
Modeling DO and BOD5 Changes in the Dez River by Using QUAL2Kw
980
Modeling domains using Bézier surfaces in plane boundary problems defined by the Navier–Lame equation with body forces
981
Modeling dose response in the presence of spatial variations in dose rate
982
Modeling double-layer capacitor behavior using ladder circuits
983
Modeling double-skinned FO membranes Original Research Article
984
Modeling dowel action of reinforcement bars for finite element analysis of concrete structures
985
MODELING DOWNSTREAM FINING IN SAND-BED RIVERS. I: FORMULATION
986
MODELING DOWNSTREAM FINING IN SAND-BED RIVERS. II: APPLICATION
987
Modeling drag force acting on the individual particles in low Reynolds number flow
988
Modeling Drainwater Selenium Removal in Wetlands
989
Modeling Driver’s Hazard Perception using Driver s Personality Characteristics
990
Modeling driving force in processes of ultrafiltration of non-Newtonian fluids
991
Modeling drop size distributions
992
Modeling droplet collision and coalescence in an icing wind tunnel and the influence of these processes on droplet size distribution
993
Modeling droplet dispersion and interphase turbulent kinetic energy transfer using a new dual-timescale Langevin model
994
Modeling dropouts by conditional distribution, a copula-based approach
995
Modeling drug detection and diagnosis with the ‘drug evaluation and classification program’
996
Modeling drug release from a layered double hydroxide–ibuprofen complex
997
Modeling ductile damage under fully reversed cycling
998
Modeling ductile fracture using a simplified meshfree method
999
Modeling ductile to brittle fracture transition in steels—micromechanical and physical challenges
1000
Modeling ductile to brittle transition temperature of functionally graded steels by artificial neural networks
