<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Optimum design of cogeneration for power and desalination to satisfy the demand of water and power Original Research Article
2
Optimum design of cold-formed steel channel beams using micro Genetic Algorithm
3
Optimum design of cold-formed steel columns by using micro genetic algorithms
4
Optimum design of composite laminates for frequency constraints
5
Optimum design of composite laminates for maximum buckling load capacity using simulated annealing
6
Optimum design of composite laminates for minimum thickness
7
OPTIMUM DESIGN OF COMPOSITE OPEN CHANNELS USING CHARGED SYSTEM SEARCH ALGORITHM
8
Optimum design of composite plate wings for aeroelastic characteristics using lamination parameters
9
Optimum design of composite structures with curved fiber courses
10
Optimum design of composite structures with curved fiber courses
11
Optimum design of composite structures with ply drop using genetic algorithm and expert system shell
12
Optimum design of composite structures with ply drop using genetic algorithm and expert system shell
13
Optimum design of cross-sectional profiles of pultruded box beams with high ultimate strength
14
Optimum design of cross-sectional profiles of pultruded box beams with high ultimate strength
15
Optimum design of detector structure for road transport inspection
16
Optimum design of detector structure for road transport inspection
17
Optimum design of dome contour for filament-wound composite pressure vessels based on a shape factor
18
OPTIMUM DESIGN OF DOUBLE CURVATURE ARCH DAMS USING A QUICK HYBRID CHARGED SYSTEM SEARCH ALGORITHM
19
Optimum design of double pipe heat exchanger
20
Optimum design of dual pressure heat recovery steam generator using non-dimensional parameters based on thermodynamic and thermoeconomic approaches
21
Optimum design of externally pressurized air bearing using Cluster OpenMP
22
Optimum Design of FGX-CNT-Reinforced Reddy Pipes Conveying Fluid Subjected to Moving Load
23
Optimum design of fiber-reinforced composite cylindrical skirts for solid rocket cases subjected to buckling and overstressing constraints
24
Optimum Design of Filament-Wound Laminated Conical Shells for Buckling Using the Penalty Function
25
Optimum design of flexible structures under constraints on strain energy and asymptotic stability Original Research Article
26
Optimum Design of Flywheels Using Genetic Algorithm and Finite Element Coupling
27
Optimum design of fractional order PIλDμ controller for AVR system using chaotic ant swarm
28
OPTIMUM DESIGN OF FRAME STRUCTURES USING TWO-POINT RESPONSE APPROXIMATION
29
OPTIMUM DESIGN OF FRAME STRUCTURES USING TWO-POINT RESPONSE APPROXIMATION
30
Optimum design of frames with multiple constraints using an evolutionary method
31
Optimum design of geometrically non-linear elastic–plastic steel frames via genetic algorithm
32
Optimum design of grain impact sensor utilising polyvinylidene fluoride films and a floating raft damping structure
33
OPTIMUM DESIGN OF GRILLAGE SYSTEMS USING CBO AND ECBO ALGORITHMS
34
Optimum Design of Grillage Systems Using Genetic Algorithms
35
Optimum design of high-rise steel buildings using an evolution strategy integrated parallel algorithm
36
Optimum design of hybrid composite multi-ring flywheel rotor based on displacement method
37
Optimum design of hybrid renewable energy systems: Overview of different approaches
38
Optimum Design of Hydraulic Excavator
39
Optimum design of inhomogeneous non-uniform rotating discs
40
Optimum design of irregular grillage systems using CSS and ECSS algorithms with different boundary conditions
41
Optimum design of laminated composite foam-filled sandwich plates subjected to strength constraint
42
Optimum design of laminated composite plates to maximize buckling load using MFD method
43
Optimum design of laminated composite structures
44
Optimum design of limaçon gas expanders based on thermodynamic performance
45
Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network
46
OPTIMUM DESIGN OF LONG-TERM DEFLECTION IN SEGMENTED PRESTRESS BRIDGES BY CONSIDERING THE EFFECTS OF CREEP and SHRINKAGE
47
OPTIMUM DESIGN OF LUMPED FILTERS INCORPORATING IMPEDANCE MATCHING BY THE METHOD OF LEAST SQUARES
48
Optimum design of magnet shape in permanent-magnet synchronous motors
49
Optimum Design of Microirrigation Systems in Sloping Lands
50
Optimum design of multi-layer K-edge filter and multi-stage detectors for triple energy bone densitometer
51
Optimum design of multi-layer K-edge filter and multi-stage detectors for triple energy bone densitometer
52
Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range
53
Optimum design of multi-ring composite flywheel rotor using a modified generalized plane strain assumption
54
Optimum design of multi-ring composite flywheel rotor using a modified generalized plane strain assumption
55
Optimum design of multi-ring composite flywheel rotor using a modified generalized plane strain assumption
56
Optimum design of multi-stage isotope separation process by exergy analysis
57
Optimum design of nailed soil slopes
58
optimum design of nano-scaled beam using the social spider optimization (sso) algorithm
59
Optimum design of natural-circulation solar-water-heater by the Taguchi method
60
Optimum design of nonlinear steel frames with semi-rigid connections using a genetic algorithm
61
Optimum design of ordered bulk heterojunction organic photovoltaics
62
Optimum design of pitched roof steel frames with haunched rafters by genetic algorithm
63
Optimum Design of Plane Steel Frame Structures Using Second-Order Inelastic Analysis and a Genetic Algorithm
64
Optimum design of plane timber trusses considering joint flexibility
65
OPTIMUM DESIGN OF PLATE STRUCTURES USING BINARY PARTICLE SWARM OPTIMIZATION
66
Optimum design of printed circuit board to reduce deformation in reflow process by a global optimization method
67
OPTIMUM DESIGN OF PROCESS CONDITIONS TO MINIMIZE RESIDUAL STRESSES IN INJECTION-MOLDED PARTS
68
Optimum design of processing condition and experimental investigation of grating fabrication with hot embossing lithography
69
Optimum Design of Processing Parameters during ISM Process of Ti-47Ni-9Nb
70
Optimum Design of PSS and SVC Controller for Damping Low Frequency Oscillation (LFO)
71
Optimum design of PV processes for dehydration of organic mixtures Original Research Article
72
Optimum design of radial flow moving-bed reactors based on a mathematical hydrodynamic model
73
OPTIMUM DESIGN OF REINFORCED CONCRETE FRAMES USING BAT META-HEURISTIC ALGORITHM
74
OPTIMUM DESIGN OF REINFORCED EARTH WALLS WITH METAL STRIPS; SIMULATION-OPTIMIZATION APPROACH
75
Optimum design of reverse osmosis seawater desalination system considering membrane cleaning and replacing
76
Optimum design of reverse osmosis system under different feed concentration and product specification
77
Optimum design of rolling element bearings using genetic algorithms
78
Optimum design of rotor-bearing system stability performance comparing an evolutionary algorithm versus a conventional method
79
Optimum design of rotor-bearing system stability performance comparing an evolutionary algorithm versus a conventional method
80
Optimum design of run-flat tire insert rubber by genetic algorithm
81
Optimum Design of Scallop Domes for Dynamic Time History Loading by Harmony Search-Firefly Algorithm
82
Optimum design of scroll profiles created from involute of circle with variable radii by using finite element analysis
83
Optimum design of sensor arrays via simulation-based multivariate calibration
84
Optimum design of serial measurement trees
85
Optimum design of shading-type building-integrated photovoltaic claddings with different surface azimuth angles
86
Optimum design of shaped beam cylindrical array antenna with electronically scan radiation pattern
87
Optimum design of shell structures with random geometric, material and thickness imperfections
88
Optimum design of short journal bearings by artificial life algorithm
89
Optimum design of short journal bearings by enhanced artificial life optimization algorithm
90
OPTIMUM DESIGN OF SINGLE LAYER NETWORK DOMES USING HARMONY SEARCH METHOD
91
OPTIMUM DESIGN OF SINGLE-LAYER DOME STRUCTURES USING A HYBRID CHARGED SYSTEM SEARCH and TEACHING-LEARNING-BASED OPTIMIZATION
92
OPTIMUM DESIGN OF SKELETAL STRUCTURES USING ANT LION OPTIMIZER
93
Optimum design of skeletal structures using imperialist competitive algorithm
94
Optimum design of space radiators with temperature-dependent thermal conductivity
95
OPTIMUM DESIGN OF SPACE TRUSSES USING CUCKOO SEARCH ALGORITHM WITH LÉVY FLIGHTS
96
Optimum Design of Space Trusses using Water Cycle Algorithm
97
Optimum design of spherical parallel manipulators for a prescribed workspace
98
Optimum design of steel structures with web openings
99
OPTIMUM DESIGN OF STEEL SWAY FRAMES USING BIG BANG- BIG CRUNCH ALGORITHM
100
Optimum design of stochastically excited non-linear dynamic systems without geometric constraints
101
Optimum design of straight thin-walled box section beams for crashworthiness analysis
102
Optimum design of structures against earthquake by discrete wavelet transform
103
Optimum Design of Structures by an Improved Particle Swarm Algorithm
104
Optimum design of structures subjected to follower forces
105
Optimum design of structures subjected to follower forces
106
OPTIMUM DESIGN OF STRUCTURES USING AN IMPROVED FIREFLY ALGORITHM
107
Optimum design of structures with discrete variables using higher order approximation Original Research Article
108
Optimum design of structures with stress and displacement constraints using the force method
109
Optimum design of structures with stress and displacement constraints using the force method
110
Optimum design of structures with stress and displacement constraints using the force method
111
Optimum design of symmetric composite patch repair to centre cracked metallic sheet
112
Optimum design of tapered slot antenna profile
113
Optimum design of the co-cured double lap joint composed of aluminum and carbon epoxy composite
114
Optimum design of thin-walled closed cross-sections: a numerical approach
115
OPTIMUM DESIGN OF TMD SYSTEM FOR TALL BUILDINGS
116
Optimum Design of Transmission Towers Subjected to Wind and Earthquake Loading
117
Optimum design of trimming line by one-step analysis for auto body parts
118
Optimum design of Trombe wall system in mediterranean region
119
Optimum design of truss structures undergoing large deflections subject to a system stability constraint
120
Optimum design of tuned liquid column dampers under stochastic earthquake load considering uncertain bounded system parameters
121
Optimum design of tuned liquid column dampers under stochastic earthquake load considering uncertain bounded system parameters
122
Optimum design of two-component composite armours against high-speed impact
123
Optimum design of vector-quantized subband codecs
124
Optimum Design of Welded Steel Plate Girder Bridges Using a Genetic Algorithm with Elitism
125
Optimum design parameters of a heat exchanger
126
Optimum design parameters of Pin-Fin heat sink using the grey-fuzzy logic based on the orthogonal arrays
127
Optimum Designing of Forging Preform Die for the H-shaped Parts Using Backward Deformation Method and Neural Networks Algorithm
128
Optimum design-parameters of a heat exchanger having hexagonal fins
129
Optimum Designs for a Multiresponse Regression Model
130
Optimum designs for estimating EDp based on raw optical density data
131
Optimum designs for estimation of optimum point under cost constraint
132
Optimum designs for estimation of regression parameters in a balanced treatment incomplete block design set-up
133
Optimum designs for multi-layered film structures based on the knowledge on residual stresses
134
Optimum designs for optimum mixtures
135
Optimum designs for superpressure balloons Original Research Article
136
Optimum designs for the equality of parameters in enzyme inhibition kinetic models
137
Optimum detailed design of reinforced concrete continuous beams using Genetic Algorithms
138
Optimum detection and location estimation of target lines in the range-time space of a search radar
139
Optimum dialysis membrane for endotoxin blocking
140
Optimum Diameter and Location of Pipes Containing Phase Change Materials in a Channel in Latent and Sensible Heat Transfer
141
Optimum dietary amino acid pattern and limiting order of some essential amino acids for growing-furring blue foxes (Alopex lagopus)
142
Optimum dietary protein requirement for maximum growth performance of Caspian kutum (Rutilus frisii) juveniles
143
Optimum dimensions of convecting–radiating fins:: Part I — longitudinal fins
144
Optimum dimensions of shaped steam reforming catalysts
145
OPTIMUM DIMENSIONS OF WAFFLE SLAB FOR MEDIUM SIZE FLOORS
146
Optimum Discharge Burnup and Cycle Length for PWRs
147
Optimum discrete wavelet scaling and its application to delay and Doppler estimation
148
Optimum dispersion map for Raman amplified 160 km NZDSF+DCF fibre spans with 40 Gbit/s RZ signals
149
Optimum Distributed Energy Management of Residential Consumers in Presence of Rooftop Photovoltaic Panels
150
Optimum distributed generation placement with voltage sag effect minimization
151
Optimum distribution of added viscoelastic dampers for mitigation of torsional responses of plan-wise asymmetric structures
152
Optimum distribution of smart stiffeners in sandwich plates subjected to bending or forced vibrations
153
Optimum diversity detection over fading dispersive channels with non-Gaussian noise
154
Optimum divisible load scheduling on heterogeneous stars with limited memory
155
Optimum dosage of granular phosphorus fertilizer on the yield of young pods of Phaseolus vulgaris L.
156
Optimum dose of chitin and chitosan for organization of non-woven fabric in the subcutaneous tissue
157
Optimum dose of digoxin
158
Optimum dose of digoxin
159
Optimum doses of irinotecan
160
Optimum doses of Mg and P salts for precipitating ammonia into struvite crystals in aerobic composting
161
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation
162
Optimum Driving a Z-Pinch for Soft X-Ray Lasers
163
Optimum duration of performance testing for growth rate, feed intake, and feed efficiency in growing Boer bucks
164
Optimum dynamic balancing of planar parallel manipulators based on sensitivity analysis
165
Optimum economy and efficiency in energy consumption during start-up and shut-down of 210 MW thermal power stations
166
Optimum EDTA solvent chemistry for iron oxide removal at 150 °C
167
Optimum effective viscosity of polymer solution for improving heavy oil recovery
168
Optimum electrodeposition conditions of FeCoZr films with in-plane uniaxial anisotropy for high frequency application
169
Optimum electron distributions for space charge dominated beams in photoinjectors
170
Optimum electron distributions for space charge dominated beams in photoinjectors
171
Optimum embedding of complete graphs in books Original Research Article
172
Optimum energy levels and offsets for organic donor/acceptor binary photovoltaic materials and solar cells
173
Optimum energy management of a photovoltaic water pumping system
174
Optimum energy storage techniques for the improvement of renewable energy sources-based electricity generation economic efficiency
175
Optimum Ensemble Classification for Fully Polarimetric Synthetic Aperture Radar Data Using Global-local Classification Approach
176
Optimum estimation and forecasting of renewable energy consumption by artificial neural networks
177
Optimum exact/approximate point synthesis of planar mechanisms
178
Optimum excitation and detection of NMR signal in static magnetic field gradient
179
Optimum excitation and detection of NMR signal in static magnetic field gradient
180
Optimum experimental designs for dynamic systems in the presence of correlated errors
181
Optimum experimental designs for dynamic systems in the presence of correlated errors
182
Optimum Experimental Designs, with SAS by Anthony Atkinson, Alexander Donev, Randall Tobias
183
Optimum experimental parameters for void determinations by radiation interrogation
184
Optimum extensions of prefix codes
185
Optimum extraction equilibria of the systems (water + carboxylic acid + 1-hexanol/Alamine): Thermodynamic modeling
186
Optimum extraction of acidic polysaccharides from the stems of Ephedra sinica Stapf by Box–Behnken statistical design and its anti-complement activity
187
Optimum extraction of polysaccharides from motherwort leaf and its antioxidant and antimicrobial activities
188
Optimum extraction of polysaccharides from Opuntia dillenii and evaluation of its antioxidant activities
189
Optimum Farm Plan for Food Security among Smallholder Farmers in Imo State, Nigeria
190
Optimum Farm Plan for Food Security among Smallholder Farmers in Imo State, Nigeria
191
Optimum feed temperatures for seawater reverse osmosis plant operation in an MSF/SWRO hybrid plant
192
Optimum filter design for quantized multidimensional subband filter bank
193
Optimum filter for 1f current noise smoothed-to-white at low frequency
194
Optimum filter for 1f current noise smoothed-to-white at low frequency
195
Optimum filtering and stochastic optimization in EXAFS data analysis Original Research Article
196
Optimum Filtering for Energy-Spreading Transform-Based Equalization
197
Optimum filters for charge measurements in the presence of 1f current noise
198
Optimum filters from experimentally measured noise in high resolution nuclear spectroscopy
199
Optimum filters from experimentally measured noise in high resolution nuclear spectroscopy
200
Optimum fin density of low fin tubes for the condensers of building chillers with HCFC123
201
Optimum fin geometry in flat plate solar collector systems
202
Optimum FIR filter for sampled signals in presence of jitter
203
Optimum FIR filter for sampled signals in presence of jitter
204
Optimum Food Type, Feeding Schedule and Prey Density for the Zoea Larvae of the Crucifix Crab, Charybis feriatus (Crustacea:Decapoda:Portunidae)
205
OPTIMUM FORM AND PLACEMENT OF URBAN BLOCKS TO MAXIMIZE THE USE OF SOLAR ENERG – A CASE STUDY
206
Optimum Form, Aspect Ratio and Orientation of Building Based on Solar Energy Receiving in Hot-Dry Climate; Case Studies of Isfahan, Semnan, Kashan and Kerman Cities, Iran
207
Optimum frequency-domain partial response encoding in OFDM system
208
Optimum friction pendulum system for near-fault motions
209
Optimum frictional elements in sliding isolation systems
210
Optimum Fuel Loads in Migratory Birds: Distinguishing Between Time and Energy Minimization
211
Optimum Gabor filter design and local binary patterns for texture segmentation
212
Optimum Gas Journal Bearing with Open Bearing Ends and Feeder Slot
213
Optimum Gas Journal Bearing with the Flexible Surface
214
Optimum gas turbine cycle for combined cycle power plant
215
Optimum Gate Workfunction for $V_{rm th}$-Controllable Four-Terminal-Driven Double-Gate MOSFETs (4T-XMOSFETs)—Band-Edge Workfunction Versus Midgap Workfunction
216
Optimum Generalized Compound Linear Plan for Multiple-Step Step-Stress Accelerated Life Tests
217
Optimum geometric arrangement of vertical rectangular fin arrays in natural convection
218
Optimum Geometric Bifurcation under Pulsating Flow Assuming Minimum Energy Consumption in Cardiovascular System, an Extension on Murray’s Law
219
Optimum geometrical design for improved fuel utilization in membraneless micro fuel cell
220
Optimum geometry design of a longitudinal fin with volumetric heat generation under the influences of natural convection and radiation
221
Optimum geometry design of nonlinear braced domes using genetic algorithm
222
Optimum geometry for torque ripple minimization of switched reluctance motors
223
Optimum geometry of fixed volume plate fin for maximizing heat transfer
224
Optimum glass fiber volume fraction in the adhesive for the Al-SUS adhesively bonded joints at cryogenic temperatures
225
Optimum glass formation at off-eutectic composition and its relation to skewed eutectic coupled zone in the La based La–Al–(Cu,Ni) pseudo ternary system Original Research Article
226
Optimum gradient material for a functionally graded dental implant using metaheuristic algorithms
227
Optimum granularity level of modular product design architecture
228
Optimum groove pressing die design to achieve desirable severely plastic deformed sheets
229
Optimum ground states of generalized Hubbard models with next-nearest neighbour interaction
230
Optimum group designs for random-effects nonlinear dynamic processes
231
optimum group pixel matching strategies for image steganography
232
Optimum grouping and the boundary problem
233
Optimum growth rate of Belgian Blue double-muscled replacement heifers
234
Optimum growth shapes of clusters near planar interfaces
235
Optimum Gurney flap height determination for “lost-lift” recovery in compressible dynamic stall control
236
Optimum heat exchanger area estimation using coefficients of structural bonds: Application to an absorption chiller
237
Optimum heat pump in drying systems with waste heat recovery Original Research Article
238
Optimum heat pump in milk pasteurizing for dairy Original Research Article
239
Optimum heating of thick plate
240
Optimum honeycomb filled crash absorber design
241
Optimum hot water temperature for absorption solar cooling
242
Optimum HRTEM image contrast at 20 kV and 80 kV—Exemplified by graphene
243
Optimum HRTEM image contrast at 20 kV and 80 kV—Exemplified by graphene
244
Optimum hydrogen generation capacity and current density of the PEM-type water electrolyzer operated only during the off-peak period of electricity demand
245
Optimum immobilization of Candida rugosa lipase on Celite by RSM
246
Optimum immobilization of urease on modified acrylonitrile copolymer membranes: Inactivation by heavy metal ions
247
Optimum in situ strength design of laminates under combined mechanical and thermal loads
248
Optimum in situ strength design of laminates under combined mechanical and thermal loads
249
Optimum Indoor Signal Coverage of Dense Distributed Receivers via Ray Tracing Coupled with Genetic Algorithm
250
Optimum injection molding processing condition on EMI shielding effectiveness of stainless steel fiber filled polycarbonate composite
251
Optimum inspection planning for minimizing fatigue damage detection delay of ship hull structures
252
Optimum insulation for rectangular basements
253
OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY
254
Optimum insulation thickness for external walls on different orientations considering the speed and direction of the wind
255
Optimum insulation thickness for refrigeration applications
256
Optimum insulation thickness of external walls for energy saving
257
Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey
258
Optimum insulation-thickness for thermal and freezing protection
259
Optimum insulation-thickness for thermal and freezing protection
260
Optimum interference excision in spread spectrum communications using open-loop adaptive filters
261
Optimum interior area thermal resistance model to analyze the heat transfer characteristics of an insulated pipe with arbitrary shape
262
Optimum interpolation functions for boundary element method
263
Optimum Investment Planning for Development and Operation of Electricity Network in Presence of Renewable Units
264
Optimum ionic conductivity and diffusion coefficient of ion-exchange membranes at high methanol feed concentrations in a direct methanol fuel cell
265
Optimum isothermal surfaces that maximize heat transfer
266
Optimum IV-group ion concentrations in ZnGa2O4−xMx (M=S, Se, Te) phosphors for enhancement of luminescence
267
Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets
268
Optimum kinetic energy dissipation to maintain blood flow in glass capillaries: An analysis based on flow field determination by axial tomographic and image velocimetry techniques
269
Optimum laser surface treatment of fatigue damaged Ti–6Al–4V alloy
270
Optimum laser surface treatment of fatigue damaged Ti–6Al–4V alloy
271
Optimum lateral spacing for drip-irrigated corn in the Mediterranean Region of Turkey
272
Optimum lattice functions for electron cooling
273
Optimum lattice functions for electron cooling
274
Optimum Layout of Buildings Subjected to Geometric Constraints
275
OPTIMUM LAYOUT OF NONLINEAR FLUID VISCOUS DAMPER FOR IMPROVEMENT THE RESPONSES OF TALL BUILDINGS
276
Optimum lead–rubber isolation bearings for near-fault motions
277
Optimum Learning Rate in Back-Propagation Neural Network for Classification of Satellite Images (IRS-ID)
278
Optimum length of finned pipe for waste heat recovery
279
Optimum length of muscle contraction
280
Optimum length of one-stage polarization-mode dispersion compensators with a fixed delay line
281
Optimum length of tubes for heat transfer in turbulent flow at constant wall temperature
282
OPTIMUM LEVEL OF DISCRETE WAVELET DECOMPOSITION FOR DYNAMIC ANALYSIS OF HYDRAULIC STRUCTURES
283
Optimum lime content identification for lime-stabilised rammed earth
284
Optimum Linear Joint Transmit-Receive Processing for MIMO Channels with QoS Constraints
285
Optimum load sharing strategy for multiple-chiller systems serving air-conditioned buildings
286
Optimum load shedding for avoiding steady-state voltage instability
287
Optimum load-shedding technique to reduce the total customer interruption cost in a distribution system
288
Optimum Location and Angle of Inclination of Cut-off to Control Exit Gradient and Uplift Pressure Head under Hydraulic Structures
289
Optimum location and distribution of insulation layers on building walls with various orientations
290
Optimum location and size of the LC harmonic filters in the feeders with uniformly distributed linear and nonlinear loads
291
Optimum location of a three strain gauge rosette for measuring mixed mode stress intensity factors
292
Optimum location of knot for tendon surgery in side-locking loop technique
293
Optimum Location of Outrigger-belt Truss in Tall Buildings Based on Maximization of the Belt Truss Strain Energy
294
Optimum Location of Tube Blank in Electromagnetic Bulging
295
Optimum maintenance policy with Markov processes
296
Optimum maintenance strategy for deteriorating bridge structures based on lifetime functions
297
Optimum Maintenance Strategy Selection Using a Hybrid Approach Based on Analytical Hierarchy Process and Revised Multi Choice Goal Programming
298
Optimum management and environmental protection in the aquaculture industry
299
Optimum Management of Furrow Fertigation to Maximize Water and Fertilizer Application Efficiency and Uniformity
300
Optimum Markov replacement policies for using the most reliable components
301
Optimum massthickness of Ag-nanoparticle film for surface enhanced Raman scattering
302
Optimum massthickness of Ag-nanoparticle film for surface enhanced Raman scattering
303
Optimum maturity in mortgage credits
304
Optimum membrane length in electrodialytic desalination of diluted solutions Original Research Article
305
Optimum message transfer rate for distribution feeder protection operating over switched telephone networks
306
Optimum microstructure combination for maximizing tensile strength in a polycrystalline superalloy with a two-phase structure Original Research Article
307
Optimum mix design of enhanced permeable concrete – An experimental investigation
308
Optimum mix parameters of high-strength self-compacting concrete with ultrapulverized fly ash
309
Optimum model-based segmentation techniques for multifrequency polarimetric SAR images of urban areas
310
Optimum modeling of a flexible multi-bearing rotor system
311
Optimum mode-switching-assisted constant-power single- and multicarrier adaptive modulation
312
Optimum moisture levels for biodegradation of mortality composting envelope materials
313
Optimum MoS2–Cr coating for sliding against copper, steel and ceramic balls
314
Optimum MoS2–Cr coating for sliding against copper, steel and ceramic balls
315
Optimum multicast of multimedia streams
316
Optimum multi-fault classification of gears with integration of evolutionary and SVM algorithms
317
Optimum Multiflow Biorthogonal DMT With Unequal Subchannel Assignment.
318
Optimum multiparameter analysis of the water mass structure in the Atlantic Ocean thermocline
319
Optimum multiuser noncoherent DPSK detection in generalized diversity Rayleigh-fading channels
320
Optimum Muscle Design for Oscillatory Movements
321
Optimum natural convection from square cylinder in vertical channel
322
OPTIMUM NORMALIZED-GAUSSIAN TAPERING WINDOW FOR SIDE LOBE REDUCTION IN UNIFORM CONCENTRIC CIRCULAR ARRAYS
323
Optimum NOx abatement in diesel exhaust using inferential feedforward reductant control
324
Optimum number of stages and intermediate pressure level for highest exergy efficiency in large helium liquefiers
325
OPTIMUM NUMBERS OF SINGLE NETWORK FOR COMBINATION IN MULTIPLE NEURAL NETWORKS MODELING APPROACH FOR MODELING NONLINEAR SYSTEM
326
Optimum on-line correction of process deviations in batch retorts through simulation
327
Optimum open eye equalizer design for nonminimum phase channels
328
Optimum operating conditions for a combined power and cooling thermodynamic cycle
329
Optimum operating conditions for a two-stage gasification process fueled by polypropylene by means of continuous reactor over ruthenium catalyst
330
Optimum operating conditions for an adsorption cryocooler: a case of activated carbon + nitrogen system Original Research Article
331
Optimum operating conditions for brewerʹs spent grain soda pulping
332
Optimum operating conditions for heat and mass transfer in foodstuffs drying by means of neural network inverse
333
Optimum operating conditions in closed-system industrial acetifiers (semi-continuous operation): a study by computer simulation
334
Optimum Operating Conditions of (PbxX1−x)(ZryTizY1−y−z) Piezoelectric Transducer for Vibrational Energy Harvesting Applications
335
Optimum operating conditions of DIR-MCFC without vapor-phase carbonate pollution
336
Optimum operating conditions of irreversible solar driven heat engines
337
Optimum operating conditions of solar driven heat engines
338
Optimum operating performance based online fault-tolerant control strategy for sensor faults in air conditioning systems
339
Optimum operating strategies for liquid-fed direct methanol fuel cells
340
Optimum operation conditions of direct capillary nanofiltration for wastewater treatment Original Research Article
341
Optimum operation for a back-pressure cogeneration system under time-of-use rates
342
Optimum operation of femtosecond parametric oscillation of a noncollinear phase match in KTP
343
Optimum operation of large scale wind-diesel generation systems
344
Optimum Operation of Microgrid Considering the Effects of Energy Storage and Load Response Program to Increase Resilience
345
Optimum operation of oxidative coupling of methane in porous ceramic membrane reactors
346
Optimum operation strategy and economic analysis of a photovoltaic-diesel-battery-mains hybrid uninterruptible power supply
347
Optimum operational conditions of a rotary regenerator using genetic algorithm
348
Optimum ordering policies for expensive slow moving items Original Research Article
349
OPTIMUM ORIENTATION OF A MUTUALLY-SHADED GROUP OF BUILDINGS WITH RESPECT TO EXTERNAL SOLAR RADIATION
350
Optimum orientation of domestic solar water heaters for the low latitude countries
351
Optimum Orientation of the Multi-Span Greenhouse for Maximum Capture of Solar Energy in Central Region of Iran
352
Optimum overhang dimensions for energy saving
353
Optimum OVSF code reassignment in Wideband CDMA forward radio link
354
Optimum packing density and crystal structure of tin-doped indium oxide thin films for high-temperature annealing processes
355
Optimum parameter for estimating phase fluctuations on transionospheric signals at high latitudes Original Research Article
356
Optimum parameter selection to aid in developing a method for electrically testing a single fastener in trackwork
357
Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg–3Sn–1Ca alloy
358
Optimum Parameters for Cutting Hard and Tough Material (Hardox Steel) by Abrasive Water Jet Cutting Process
359
Optimum Parameters for Tuned Mass Damper Using Shuffled Complex Evolution (SCE) Algorithm
360
Optimum Parameters of a Rotating Cylindrical Shell for Feasibility of Performing Modal Testing by Fewer Circumferential Non-contact Sensors
361
Optimum parameters of Maxwell model-defined dampers used to link adjacent structures
362
Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method
363
OPTIMUM PARAMETERS OF TUNED LIQUID COLUMN DAMPER FOR SUPPRESSING PITCHING VIBRATION OF AN UNDAMPED STRUCTURE
364
OPTIMUM PARAMETERS OF TUNED MASS DAMPERS FOR SEISMIC APPLICATIONS USING CHARGED SYSTEM SEARCH*
365
Optimum parameters to etch Nd:YAG crystals with orthophosphoric acid H3PO4
366
OPTIMUM PARAMETRIC ANALYSIS BASED ON THERMODYNAMIC MODELING OF A COMPRESSION ABSORPTION CASCADE REFRIGERATION SYSTEM
367
Optimum parametric performance characterization of an irreversible gas turbine Brayton cycle
368
Optimum Pareto design of non-linear predictive control with multi-design variables for PEM fuel cell
369
Optimum Pareto design of vehicle vibration model excited by non-stationary random road using multi-objective differential evolution algorithm with dynamically adaptable mutation factor
370
Optimum particle size distribution for reduced sintering shrinkage of a dental porcelain
371
Optimum particle size for prediction of ambient air arsenic dry deposition in central Taiwan
372
Optimum partitioning into intersections of ring families Original Research Article
373
Optimum passive shields for mitigation of power lines magnetic field
374
Optimum path forming technique for sheet metal and its realization in multi-point forming
375
Optimum path packing on wheels: The consecutive case
376
Optimum paths for systems subject to internal noise
377
Optimum patient position for sonographic examination of the kidneys
378
Optimum penstocks for low head microhydro schemes
379
Optimum percentile estimating equations for nonlinear random coefficient models
380
Optimum percutaneous transluminal coronary angioplasty compared with routine stent strategy trial (OPUS-1): a randomised trial Original Research Article
381
Optimum performance analysis of an irreversible Diesel heat engine affected by variable heat capacities of working fluid
382
Optimum performance characteristics of an irreversible absorption refrigeration system
383
Optimum performance characteristics of an irreversible solar-driven Brayton heat engine at the maximum overall efficiency
384
Optimum performance characteristics of doubly fed induction motors using field oriented control
385
Optimum performance of a corrugated, collector-driven, irreversible carnot heat engine and absorption refrigerator
386
Optimum performance of an irreversible solar-driven cogeneration heat pump system
387
Optimum performance of heat engine-driven heat pumps: A finite-time approach
388
Optimum performance of irreversible cascaded and double effect absorption refrigerators
389
Optimum performance of irreversible stirling engine with imperfect regeneration
390
Optimum performance parameters for a quantum Carnot heat pump with spin-1/2
391
OPTIMUM PERFORMANCE-BASED DESIGN OF CONCENTRICALLY BRACED STEEL FRAMES SUBJECTED TO NEAR-FAULT GROUND MOTION EXCITATIONS
392
Optimum pH for Cr6+ Co-removal with Mixed Cu2+, Zn2+, and Ni2+ Precipitation
393
Optimum phase matching and effective nonlinear coefficients of LBO and KTP for continuously changing wavelength
394
Optimum phase ratio in the triple jump
395
Optimum phase type and optimum salinity profile in surfactant flooding
396
Optimum phase-behavior formulation of surfactant/oil/water systems for the determination of chromium in heavy crude oil and in bitumen-in-water emulsion
397
Optimum phase-only adaptive nulling
398
Optimum pinch grips in the handling of dies
399
Optimum pixel size for hyperspectral studies of ecosystem function in southern California chaparral and grassland
400
OPTIMUM PLACEMENT AND PROPERTIES OF TUNED MASS
401
Optimum placement of condensing units of split-type air-conditioners by numerical simulation
402
Optimum placement of sea rescue resources
403
Optimum plastic analysis of planar frames using ant colony system and charged system search algorithms
404
Optimum plate spacing for the best recovery of deuterium from water–isotopes mixture in flate-plate thermal-diffusion columns with total expense fixed
405
Optimum pole arc offset in permanent magnet synchronous generators for obtaining lowest voltage harmonics
406
Optimum pole arcs for a switched reluctance motor for higher torque with reduced ripple
407
Optimum policies for a system with general imperfect maintenance
408
Optimum policies for a system with general imperfect maintenance
409
Optimum policy in hybrid manufacturing/remanufacturing system
410
Optimum porous journal bearing ensuring maximum load capacity
411
Optimum positioning of actuators in tall buildings using genetic algorithm
412
Optimum Postmortem Chilled Storage emperature for Summer and Winter Acclimated, Rested, Chinook Salmon (Oncorhynchus tshawytscha) White Muscle
413
Optimum post-tensioning cable forces of Mau-Lo Hsi cable-stayed bridge
414
Optimum power generation characteristics of an MHD generator with kerosene oil-heavy fuel oil mixture as working fluid
415
Optimum power-saving method for power MOSFET width of DC/DC converters
416
Optimum pre-form dies in two-stage forging
417
Optimum preparation of silanes for steel pretreatment
418
Optimum preparation of silanes for steel pre-treatment
419
Optimum Pressure Distribution in Design of Cryogenic NGL Recovery Processes
420
Optimum primary and supplementary signals optimizing the seismic data resolution
421
Optimum Process Adjustment Under Inspection Errors with Considering the Cycle Time of Production and Two Markets for the Sale of Goods
422
Optimum process and energy density analysis of canola oil biodiesel synthesis
423
Optimum process designs for ultrafiltration and crossflow microfiltration systems Original Research Article
424
Optimum process mean and manufacturing quantity settings for serial production system under the quality loss and rectifying inspection plan
425
Optimum process parameters for ultrasonic consolidation of 3003 aluminium
426
Optimum process parameters to produce green ceramic complex parts
427
Optimum processing conditions for the fabrication of large, single grain Ag-doped YBCO bulk superconductors
428
Optimum Production of Biodiesel from an Underutilized and Potential Feed Stock, Kusum Seed Oil
429
Optimum production plans for thermal power plants in the deregulated electricity market
430
Optimum profile modifications of spur gears by means of genetic algorithms
431
Optimum profit model based on order quantity, product price, and process quality level
432
Optimum project for horizontal axis wind turbines ‘OPHWT’
433
Optimum properties of multiple tuned mass dampers for reduction of translational and torsional response of structures subject to ground acceleration
434
Optimum Pulse Duration and Radiant Exposure for Vascular Laser Therapy of Dark port-wine Skin: A Theoretical Study
435
Optimum pulse-width modulated patterns in induction motors using Walsh functions
436
Optimum pump-pulse duration for optical parametric oscillators
437
Optimum PV-diesel hybrid systems for remote consumers of the Greek territory
438
Optimum quantization and its applications
439
Optimum quantization for detector fusion: some proofs, examples, and pathology
440
Optimum rate allocation for two-class services in CDMA smart antenna systems
441
Optimum Ratio of Co/Mn in the Liquid-Phase Catalytic Oxidation of p-Xylene to Terephthalic Acid
442
Optimum ratio of upper to lower limb lengths in hand-carrying of a load under the assumption of frequency coordination
443
Optimum RCS depressurization strategy for effective severe accident management of station black out accident Original Research Article
444
Optimum reaction conditions for in situ polyaniline films
445
Optimum reactor configuration for prevention of gypsum scaling during continuous sulphuric acid neutralization
446
Optimum reading time for patch tests
447
Optimum reading time for patch tests
448
Optimum realizations of sampled-data controllers for FWL sensitivity minimization
449
Optimum receiver decision point in presence of PMD in fiber-optic communication systems
450
Optimum receivers and low-dimensional spreaded modulation for multiuser space-time communications
451
Optimum reckoning of contra lateral breast dose using physical wedge and enhanced dynamic wedge in radiotherapy treatment planning system
452
Optimum recovery time for cyclic compression tests on bovine brain tissue
453
Optimum refractive index of poly-component particulate systems for measurement of particle size distribution by laser diffraction method analyzer
454
Optimum removal in ion-beam figuring
455
Optimum Requirement Spanning Trees and Reliability of Tree Networks
456
Optimum Requirement Spanning Trees and Reliability of Tree Networks
457
Optimum Reserve Capacity Assessment and Energy and Spinning Reserve Allocation Based on Deterministic and Stochastic Security Approach
458
Optimum reserved resource allocation scheme for handoff in CDMA cellular system
459
Optimum residence time analysis for a walking beam type reheating furnace
460
Optimum residential load management strategy for real time pricing (RTP) demand response programs
461
OPTIMUM RESISTANCE FACTOR FOR REINFORCED CONCRETE BEAMS RETROFITTED WITH U-WRAP FRP
462
Optimum Resource Allocation of Database in Cloud Computing
463
Optimum revolution and rotational directions and their speeds in planetary ball milling
464
Optimum rigid pavement design by genetic algorithms
465
Optimum road spacing of ground based skidding operations in Nowshahr, Iran
466
Optimum rotationally symmetric detector configurations for phase-contrast imaging in scanning transmission electron microscopy
467
Optimum rotationally symmetric detector configurations for phase-contrast imaging in scanning transmission electron microscopy
468
Optimum Route election for Oil and Ga Transmission Lines Using Remote Sensing and GIS Integration
469
Optimum routes for particle breakage by impact
470
Optimum Routing in Wireless Sensor Networks with Random Node Locations
471
Optimum Sampling Density for the Prediction of Acid Mine Drainage in an Underground Sulphide Mine
472
Optimum sampling vectors for Wiener filter noise reduction
473
Optimum scheduling of the HRES for an isolated rural city in Iran
474
Optimum Seed Rate of Vigna sun-hum (Tagtaga) for Rangeland Rehabilitation in Sandy Soil of North Kordofan
475
Optimum seismic design of a multi-storey steel frame
476
Optimum Seismic Design of Short to Mid-Rise Steel Moment Resisting Frames Based on Uniform Deformation Theory
477
Optimum Seismic Design of Tuned Story Mass Damper Using Multi-Objective Genetic Algorithm
478
OPTIMUM SELECTION AND SCALING OF ACCELEROGRAMS REQUIRED IN TIME HISTORY ANALYSIS OF SPATIAL STRUCTURES
479
Optimum selection of an energy resource using fuzzy logic Original Research Article
480
Optimum selection of compact heat exchangers using non-structural fuzzy decision method
481
Optimum Selection of Drill Bits for Drilling Operations in Sarvak and Asmari Formations Using a Fuzzy Multiple Criteria Decision-Making Approach
482
Optimum selection of machining conditions in abrasive flow machining using neural network
483
Optimum Selection of Modes Set for Adaptive Modulation and Coding based on Imperfect Channel State Information
484
OPTIMUM SELECTION OF NUMBER and LOCATION OF GEOTECHNICAL BOREHOLES BASED ON SOIL RESISTANCE
485
Optimum selection of solar collectors for a solar-driven ejector air conditioning system by experimental and simulation study
486
Optimum sensitivity of single-mode D-type optical fiber sensor in the intensity measurement
487
Optimum Sensor Placement for StructuralDamage Detection
488
Optimum separation condition of peptides in reversed-phase liquid chromatography
489
Optimum service capacity and demand management with price incentives
490
Optimum Setting of Controller Using Soft Computing Techniques for a Chemical System
491
Optimum shape and dimensions of ducts for convective heat transfer in laminar flow at constant wall temperature
492
Optimum shape and topology design using the boundary element method
493
OPTIMUM SHAPE DESIGN AND POSITIONING OF FEATURES USING THE BOUNDARY INTEGRAL EQUATION METHOD
494
Optimum Shape Design of a Radiant Oven by the Conjugate Gradient Method and a Grid Regularization Approach
495
Optimum shape design of die and preform for improved hardness distribution in cold forged parts
496
OPTIMUM SHAPE DESIGN OF DOUBLE-LAYER GRIDS BY QUANTUM BEHAVED PARTICLE SWARM OPTIMIZATION AND NEURAL NETWORKS
497
Optimum shape design of shell structures
498
Optimum shape design of structural model with imprecise coefficient by parametric geometric programming
499
Optimum shapes for multilayered toroidal inductors
500
Optimum shapes of tire-treads for avoiding lateral slippage between tires and roads
501
Optimum shielding in Jovian radiation environment
502
Optimum shielding in Jovian radiation environment
503
Optimum shunt capacitor placement in distribution system—A review and comparative study
504
Optimum signal and image recovery by the method of alternating projections in fractional Fourier domains
505
Optimum signal in a diffusion leaky integrate-and-fire neuronal model
506
Optimum siting of wind turbine generators
507
Optimum size and structure for solar energy collection systems
508
Optimum Size for Clay Core of Alavian Earth Dam by Numerical Simulation
509
Optimum Sizing and Placement of Wind Turbines in Distribution Networks Considering Correlation of Load Demand and Wind Power
510
Optimum sizing and tracking of combined cooling heating and power systems for bulk energy consumers
511
Optimum sizing of an autonomous wind–diesel hybrid system for various representative wind-potential cases
512
Optimum sizing of battery-integrated diesel generator for remote electrification through design-space approach
513
Optimum sizing of photovoltaic battery systems incorporating uncertainty through design space approach
514
Optimum sizing of PV-attached electricity storage according to power market signals – A case study for Germany and Italy
515
Optimum sizing of stand-alone wind-photovoltaic hybrid systems for representative wind and solar potential cases of the Greek territory
516
Optimum sizing of wind-battery systems incorporating resource uncertainty
517
Optimum sliding mode controller design based on skyhook model for nonlinear vehicle vibration model
518
Optimum slope angle and orientation of solar collectors for different periods of possible utilization
519
Optimum slope of a north-south aligned absorber plate from the north to the south poles
520
Optimum soil water for soil respiration before and after amendment with glucose in humid tropical acrisols and a boreal mor layer
521
Optimum soil water for soil respiration before and after amendment with glucose in humid tropical acrisols and a boreal mor layer
522
Optimum solar and wind model with particle optimization (PSO)
523
Optimum solar flat-plate collector slope: Case study for Helwan, Egypt
524
Optimum solution of dual-ring double-scattering system for an incident beam with given phase space for proton beam spreading
525
Optimum solution of dual-ring double-scattering system for an incident beam with given phase space for proton beam spreading
526
Optimum source frequency in vibration production technology
527
Optimum Space-Time ProcessorsWith Symbol-Rate Sampling are Bandlimited
528
Optimum specific gasification rate for static bed rice hull gasifiers
529
Optimum Spectral Indices for Water Bodies Recognition Based on Genetic Algorithm and Sentinel-2 Satellite Images
530
Optimum spectroscopic performance from CZT γ- and X-ray detectors with pad and strip segmentation
531
Optimum spectroscopic performance from CZT γ- and X-ray detectors with pad and strip segmentation
532
Optimum stacking sequence design of composite materials Part I: Constant stiffness design Review Article
533
Optimum stacking sequence design of composite materials Part II: Variable stiffness design Review Article
534
Optimum stacking sequence design of symmetric hybrid laminates undergoing free vibrations
535
Optimum staging of multistage exo-reversible refrigeration systems Original Research Article
536
Optimum stand density of Leucaena leucocephala for wood production in Andhra Pradesh, Southern India
537
Optimum starting-up protocol of a pilot plant scale acetifier for vinegar production Original Research Article
538
Optimum static balancing of an industrial robot mechanism
539
Optimum stiffened panel design with fundamental frequency constraint
540
Optimum stimulation level and exploratory consumer behavior in an emerging consumer market
541
Optimum strain gage location for evaluating stress intensity factors in single and double ended cracked configurations
542
Optimum strain gage locations for accurate determination of the mixed mode stress intensity factors
543
Optimum strain state for oxygen diffusion in yttria-stabilised zirconia
544
Optimum strategy for designing a graphene-based counter electrode for dye-sensitized solar cells
545
Optimum strategy for energy degraders and ionization cooling
546
Optimum strategy for energy degraders and ionization cooling
547
Optimum structural design of spatial truss structures via migration-based imperialist competitive algorithm
548
Optimum structural design via convex model superposition
549
Optimum Structural Design with Discrete Variables Using League Championship Algorithm
550
Optimum structure with homogeneous optimum truss-like material
551
Optimum Structures of a Cascaded Multilevel Inverter for Minimum Number of Power Electronic Devices
552
Optimum structures of digital controllers in sampled-data systems: a roundoff noise analysis
553
Optimum substrate bias condition for TiN thin film deposition using an ECR sputter system
554
Optimum Suction Distribution for Transition Control
555
Optimum support characteristics for rotor–shaft system with preloaded rolling element bearings
556
Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy
557
Optimum Sylvian Fissure Dissection Needed for Anterior Circulation Aneurysms
558
Optimum synthesis of hybrid-task mechanisms using ant-gradient search method
559
Optimum synthesis of motion generating four-bar mechanisms using alternate error functions
560
Optimum synthesis of path generating four-bar mechanisms using differential evolution and a modified error function
561
Optimum synthesis of planar linkages using a strain–energy error function under geometric constraints
562
Optimum synthesis of the four-bar function generator in its symmetric embodiment: the Ackermann steering linkage
563
Optimum tailor-welded blank design using deformation path length of boundary nodes
564
Optimum take-off angle in the standing long jump
565
Optimum target thickness for polarimeters
566
Optimum target thickness for polarimeters
567
Optimum target values for two machines in series with 100% inspection
568
Optimum technoeconomic energy autonomous photovoltaic solution for remote consumers throughout Greece
569
Optimum Temperature and Thermal Stability of Crude Polyphenol Oxidase In GreenSmall Cherry Tomatoe (Solanum Lycopersycum)
570
Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy
571
Optimum temperature for sulphur retention in fluidised beds working under oxy-fuel combustion conditions
572
Optimum temperature range for positive ion production from metal halide molecules incident upon heated metal catalysts
573
Optimum temperature, time and atmosphere of precursor pyrolysis for synthesis of B4C ceramics
574
Optimum temperatures for carbon deposition during integrated coal pyrolysis–tar decomposition over low-grade iron ore for ironmaking applications
575
Optimum temperatures for soil respiration along a semi-arid elevation gradient in southern California
576
Optimum temperatures for soil respiration along a semi-arid elevation gradient in southern California
577
Optimum Temperatures for the Peak Growth of Some Selected Bacterial Fish Pathogens
578
Optimum temperatures in a shell and tube condenser with respect to exergy
579
Optimum tests conditions for attaining uniform rolling abrasion in ball cratering tests on hard coatings
580
Optimum Therapy for Secondary Prophylaxis of Variceal Bleeding Patient: Endoscopic, Pharmacological or Combination, A Randomized Study
581
Optimum thermal analysis of annular fin heat sink by adjusting outer radius and fin number
582
Optimum thermal design of interrupted microchannel heat sink with rectangular ribs in the transverse microchambers
583
Optimum thermal design of microchannel heat sink with triangular reentrant cavities
584
Optimum thermal design of microchannel heat sinks by the simulated annealing method
585
Optimum thermal design of modular compact heat exchangers structure for heat recovery steam generators
586
Optimum Thermal Design of Air-Conditioned Residential Buildings
587
Optimum thermal performance of microchannel heat sink by adjusting channel width and height
588
Optimum thermodynamic conditions for upper pressure limits of transcritical carbon dioxide refrigeration cycle
589
Optimum thermoeconomic and thermodynamic performance characteristics of an irreversible three-heat-source heat pump
590
Optimum thickness of carbon stripper foils in tandem accelerator in view of transmission and lifetime
591
Optimum thickness of carbon stripper foils in tandem accelerator in view of transmission and lifetime
592
Optimum thickness of joints made of GFPR pultruded adherends and polyurethane adhesive
593
Optimum three-point linkage set up for improving the quality of soil spectra and the accuracy of soil phosphorus measured using an on-line visible and near infrared sensor
594
Optimum Ti-C:H coatings on tungsten carbide inserts for milling applications
595
Optimum tillage system for pepper production in an alfisol of South-western Nigeria
596
Optimum Tilt Angle and Maximum Possible Solar Energy Gain at High Latitude Zone
597
Optimum tilt angle and orientation for solar collector in Brunei Darussalam
598
Optimum tilt angle and orientation for solar collectors in Syria
599
Optimum tilt angle for flat plate collectors all over the World – A declination dependence formula and comparisons of three solar radiation models
600
Optimum tilt angle for solar collectors used in Cyprus
601
Optimum time-limited filters for input signals of arbitrary shape
602
Optimum time-limited filters for input signals of arbitrary shape
603
Optimum timing for integrated pest management: Modelling rates of pesticide application and natural enemy releases
604
Optimum tip gap and orientation of multi-piezofan for heat transfer enhancement of finned heat sink in microelectronic cooling
605
Optimum tolerance design for complex assemblies using hierarchical interval constraint networks
606
Optimum topographical and morphological information in AFM tapping mode investigation of multicomponent polyethylene
607
Optimum topological design of geometrically nonlinear single layer latticed domes using coupled genetic algorithm
608
Optimum topological design of simply supported composite stiffened panels via genetic algorithms
609
Optimum Torque Control of Permanent-Magnet AC Machines in the Field-Weakened Region
610
Optimum toughening via a bicontinuous blending: toughening of PPO with SEBS and SEBS-g-maleic anhydride
611
Optimum tradeoff between class-selective rejection error ، average number of classes
612
Optimum transient security constrained dispatch in competitive deregulated power systems
613
Optimum transmission for a 3He neutron polarizer
614
Optimum transonic airfoils based on the Euler equations
615
Optimum trapezoidal frame with rigid members and flexible joints
616
Optimum Treatment Planning Technique Evaluation for Synchronous Bilateral Breast Cancer with Left Side Supraclavicular Lymph Nodes
617
Optimum Tuning of a Gyroscopic Vibration Absorber Using Coupled Gyroscopes for Vibration Control of a Vertical Cantilever Beam
618
Optimum tuning of series and parallel LR circuits for passive vibration suppression using piezoelectric elements
619
Optimum two level fractional factorial plans for model identification and discrimination
620
Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm
621
Optimum usage of a natural pozzolan for the maximum compressive strength of concrete
622
Optimum utilisation of low-capacity combine harvesters in high-yielding wheat farms using multi-criteria decision making
623
Optimum utilization of feed resources: model studies and farmersʹ practices in two villages in East Java, Indonesia
624
Optimum utilization of renewable energy sources in a remote area
625
Optimum VAR control of radial primary power distribution networks by shunt capacitor installation
626
Optimum VAR sizing and allocation using particle swarm optimization
627
Optimum ventilation based on the ventilation effectiveness for temperature and CO2 distribution in ventilated cavities
628
Optimum versus non-limiting water contents for root growth, biomass accumulation, gas exchange and the rate of development of maize (Zea mays L.)
629
Optimum vibration absorber (tuned mass damper) design for linear damped systems subjected to random loads
630
OPTIMUM VISCOELASTIC DESIGNER MATERIALS FOR MINIMIZING FAILURE PROBABILITIES DURING COMPOSITE CURING
631
Optimum voltage regulator placement in a radial power distribution network
632
Optimum wall thickness ratio based on the minimization of entropy generation in a viscous flow between parallel plates
633
Optimum wall-to-wall spacing in solar chimney shaped channels in natural convection by numerical investigation
634
Optimum water pulsation of jig separation for crushed plastic particles
635
Optimum weight design of fiber composite plates in flexure based on a two level strategy
636
Optimum weight of stellate sturgeon (Acipenser stellatus) fingerling to release into brackish water: plasma electrolytes, plasma hormones and histological observation
637
OPTIMUM WEIGHTED MODE COMBINATION FOR NONLINEAR STATIC ANALYSIS OF STRUCTURES
638
Optimum wind- and photovoltaic-based stand-alone systems on the basis of life cycle energy analysis
639
Optimum work in real systems with a class of finite thermal capacity reservoirs
640
Optimum zero-area filter for nuclear signal sequences
641
Optimum zero-area filter for nuclear signal sequences
642
Optimum Zr–Al–Co bulk metallic glass composition Zr53Al23.5Co23.5
643
Optimumlocalfailuremodelofsteamgeneratortubeswithmultipleaxialthrough-wallcracksOriginalResearchArticle
644
Opting for Growth: A Strategy for Al Ain
645
Opting for Growth: a Strategy for Al Ain
646
Opting In: Part-time Careers in Academic Medicine
647
Opting out of organ donation in Brazil
648
Opting-Out: The Relationship between Moral Arguments and Public Policy in Organ Procurement
649
Optioal processing architecture and its potential application for digital and analog radiography
650
Optioal processing architecture and its potential application for digital and analog radiography
651
Option and forward contracting with asymmetric information: Valuation issues in supply chains
652
Option choice for major waste management projects-two case studies
653
Option choice for major waste management projects-two case studies
654
Option Contracts as a Solution to the Holdup Problem in Agri-food Markets
655
Option Coverage Techniques for Environmental Projects
656
Option fixation: A cognitive contributor to overconfidence
657
Option for optimal extraction to indicate recognition of gestures using the self-improvement of the micro genetic algorithm
658
Option in House Lease Contracts
659
Option listing and the stock-price response to earnings announcements
660
Option markets and implied volatility: Past versus present
661
Option price forecasting using neural networks
662
Option price sensitivities through fuzzy numbers
663
Option prices under Bayesian learning: implied volatility dynamics and predictive densities
664
Option prices under stochastic volatility
665
Option Pricing Accumulated with Operational Risk
666
Option Pricing and a Comparison on the Dimension Reduction Techniques using Markov Chain Quasi-Monte Carlo under Random Sobol Sequences
667
Option pricing and foreign investment under political risk
668
Option pricing and perfect hedging on correlated stocks
669
Option pricing and replication with transaction costs and dividends
670
Option pricing bounds with standard risk aversion preferences
671
Option pricing during post-crash relaxation times
672
Option pricing for a logstable asset price model
673
Option pricing for non-Gaussian price fluctuations
674
Option pricing for stable and infinitely divisible asset returns
675
Option pricing from path integral for non-Gaussian fluctuations. Natural martingale and application to truncated Lèvy distributions
676
Option pricing from wavelet-filtered financial series
677
Option pricing in high volatile illiquid market
678
Option pricing in incomplete markets
679
Option pricing of a bi-fractional Black–Merton–Scholes model with the Hurst exponent in
680
Option pricing of a mixed fractional–fractional version of the Black–Scholes model
681
Option pricing of fractional version of the Black–Scholes model with Hurst exponent H being in
682
Option Pricing on Commodity Prices Using Jump Diffusion Models
683
Option pricing on sesame price using jump diffusion models
684
Option pricing under linear autoregressive dynamics, heteroskedasticity, and conditional leptokurtosis
685
Option pricing under residual risk and imperfect hedging
686
Option pricing under some Lévy-like stochastic processes
687
Option pricing under the double stochastic volatility with double jump model
688
Option pricing under the Merton model of the short rate Original Research Article
689
Option pricing with an illiquid underlying asset market
690
Option pricing with artificial neural network in a time dependent market
691
Option pricing with discrete rebalancing
692
Option pricing with mean reversion and stochastic volatility
693
Option pricing with Mellin transnforms
694
Option pricing with regime switching by trinomial tree method
695
Option pricing with transaction costs using a Markov chain approximation
696
Option pricing, stochastic volatility, singular dynamics and constrained path integrals
697
Option strategies with linear programming
698
Option valuation based on the neural regression model
699
Option valuation in markets with finite liquidity under fractional CEV assets
700
Option valuation with co-integrated asset prices
701
Option valuation with conditional skewness
702
Option valuation with long-run and short-run volatility components
703
Option value of electricity demand response
704
Option value of gasification technology within an emissions trading scheme
705
Option Values and Bargaining Delays
706
Option values and endogenous uncertainty in ESOPs, MBOs and asset-backed loans
707
Option volatility and the acceleration Lagrangian
708
Optional contributions have positive effects for volunteering public goods games
709
Optional dynamic bandwidth allocation based on playback tunnel to support video-on-demand service in virtual private networks
710
Optional ergative case marking systems in a typological-semiotic perspective
711
Optional ergative marking and its implications for linguistic theory
712
Optional fixed fees in multilateral vertical relations
713
Optional Modalities for Treatment of Patients with Severe Crimean-Congo Hemorrhagic Fever
714
Optional ortho and lateral lithiations of 4,4-dimethyl-2-(o-tolyl)oxazolines
715
Optional telephone subscription scheme: a unique experiment in Korea
716
Optional versus compulsory randomized response techniques in complex surveys
717
Optionality and Gradience in Persian Phonology: An Optimality Treatment
718
Optionality and Gradience in Persian Phonology: An Optimality Treatment
719
Optionally ultra-fast synthesis of CoO/Co3O4 particles using CoCl2 solution via a versatile spray roasting method
720
Option-based compensation: a survey
721
Option-implied risk preferences: An extension to wider classes of utility functions
722
options
723
Options analysis and knowledge management: Implications for theory and practice
724
Options and impact of Chinaʹs pension reform: a computable general equilibrium analysis
725
Options and implications for ep experiments at HERA and beyond
726
Options and implications for ep experiments at HERA and beyond
727
Options and legal requirements for national and regional animal genetic resource collections
728
Options and limitations of joint cartilage imaging: DEI in comparison to MRI and sonography
729
Options and limitations of joint cartilage imaging: DEI in comparison to MRI and sonography
730
Options and methods for instrumentation of Test Blanket Systems for experiment control and scientific mission
731
Options and outlook for chiller refrigerants
732
Options available for the infusion of lipid emulsion in home parenteral nutrition (HPN): a questionnaire survey for hospitals in Japan where HPN is practiced
733
Options for academic and clinical training in stuttering
734
Options for alternative irrigation water supplies in the Murray–Darling Basin, Australia: a case study of the Shepparton Irrigation Region
735
Options for an imaging array of micro-calorimeters for X-ray astronomy
736
Options for an imaging array of micro-calorimeters for X-ray astronomy
737
Options for Britainʹs Energy Future Are Few and Unpleasant
738
Options for broadening and deepening the LCA approaches
739
Options for CO2-lean hydrogen export from Norway to Germany
740
Options for further developments of fast reactors
741
Options for Improving Reliability: How Do They Impact Air Quality?
742
Options for improving the load matching capability of distributed photovoltaics: Methodology and application to high-latitude data
743
Options for including all lands in a future greenhouse gas accounting framework
744
Options for including land use in a climate agreement post-2012: improving the Kyoto Protocol approach
745
Options for integrated beam experiments for inertial fusion energy and high-energy density physics research
746
Options for integrated beam experiments for inertial fusion energy and high-energy density physics research
747
Options for management of municipal solid waste in New York City: A preliminary comparison of health risks and policy implications
748
Options for mapping foF2 Original Research Article
749
Options for nitriles removal from C4–C5 cuts: 3. Catalytic hydrogenation using the swing reactive removal process
750
Options for orbifold-GUT model building from five-dimensional supergravity Original Research Article
751
Options for poly(vinyl chloride) feedstock recycling Results of research project on feedstock recycling processes
752
Options for poly(vinyl chloride) feedstock recycling Results of research project on feedstock recycling processes
753
Options for recarbonation, remineralisation and disinfection for desalination plants Original Research Article
754
Options for refuelling hydrogen fuel cell vehicles in Italy
755
Options for repair of a bicuspid aortic valve and ascending aortic aneurysm
756
Options for resolving disagreements
757
Options for solar-assisted refrigeration—Trough collectors and double-effect chillers
758
Options for sustainable sewage sludge management in small wastewater treatment plants on islands: The case of Crete Original Research Article
759
Options for the comparison of process design alternatives in the context of regional toxicological impacts
760
Options for the conservation of large and medium-sized mammals in the Cape Floristic Region hotspot, South Africa Original Research Article
761
Options for the management of Chernobyl-restricted areas in England and Wales
762
OPTIONS FOR THE SEPARATION OF COPPER(II) AND ZINC(II) FROM CHLORIDE SOLUTIONS BYKELEX 100
763
Options for the treatment of psoriasis: a multifactorial approach
764
Options for the use of high temperature superconductor in tokamak fusion reactor designs
765
Options for treatment of hepatitis C in HIV-infected persons
766
Options for urine treatment in developing countries Original Research Article
767
Options for veterinary drug analysis using mass spectrometry
768
Options for Victorian agriculture in a ‘‘new’’ climate: Pilot study linking climate change and land suitability modelling
769
Options for vocabulary learning through communication tasks
770
Options in mutually exclusive projects of unequal lives
771
OPTIONS IN THE MANAGEMENT OF THORACIC AND LUMBAR BURST FRACTURES: COMPARATIVE STUDY
772
Options of biofuel trade from Central and Eastern to Western European countries
773
Options of sustainable groundwater development in Beijing Plain, China
774
Options on fertility preservation in female cancer patients
775
Options strategies with the risk adjustment
776
Options to expand and to contract in combination Original Research Article
777
Options to quit
778
Options to reduce greenhouse gas emissions during wastewater treatment for agricultural use Original Research Article
779
Options to reduce N loss from maize in intensive cropping systems in Northern Italy
780
Options to reduce the environmental effects of livestock production – Comparison of two economic models
781
Options to reduce the environmental impact by eucalyptus-based Kraft pulp industry in Thailand: model description
782
Options trading activity and firm valuation
783
Options valuation by using radial basis function approximation
784
Options with combined reset rights on strike and maturity
785
Options, measures, results: Ecoprofit–Styria–Prepare two years after project end
786
Options, uncertainty and sunk costs:: an empirical analysis of land use change
787
OptionStream: An automated system for tracking derivative effects on equity prices
788
OPTIS – A Satellite test of Special and General Relativity Original Research Article
789
Optix: A Monte Carlo scintillation light transport code
790
Optix: A Monte Carlo scintillation light transport code
791
Optmization of calculation method for determination of composition of hardened mortars of Portland cement and hydrated lime made in laboratory
792
OPTMIZING THE PERFORMANCE OF PLOT SEEDER MACHINE TO SUIT WHEAT SEED PRODUCTION
793
Opto(electrical) properties of new aromatic polyazomethines with fluorene moieties in the main chain for polymeric photovoltaic devices
794
Optoacoustic analysis of the laser-cleaning process
795
Optoacoustic detection with near-infrared diode lasers: trace gases and short-lived molecules
796
Optochemical ammonia gas sensing properties of meso-substituted porphyrin derivatives immobilized Nafion film on glass slide
797
Optochemical HCl gas detection using alkoxy substituted tetraphenylporphyrin-polymer composite films: Effects of alkoxy chain length on sensing characteristics
798
Optochemical HCl gas detection using mono-substituted tetraphenylporphin-polymer composite films
799
Optochemical hydrogen peroxide sensor based on oxygen detection
800
Optochemical sensing by immobilizing fluorophore-encapsulating liposomes in sol–gel thin films Original Research Article
801
Optochemical sensing of hydrogen chloride gas using meso-tetramesitylporphyrin deposited glass plate Original Research Article
802
Optochemical sensor for HCl gas based on tetraphenylporphyrin dispersed in styrene–acrylate copolymers: Effects of glass transition temperature of matrix on HCl detection
803
Opto-chemical sensor system for the detection of H2 and hydrocarbons based on InGaN/GaN nanowires
804
Optochemical vapour detection using spin coated thin film of ZnTPP
805
Optochemical vapour detection using spin coated thin films of metal substituted phthalocyanines
806
Optode for the specific determination of anionic surfactants
807
Optode for uranium(VI) determination in aqueous medium
808
Optode Positional Calibration in Diffuse Optical Tomography
809
Optodynamic aspect of a pulsed laser ablation process
810
OPTODYNAMIC DEFORMATION OF A METAL PLATE ILLUMINATED BY A GAUSSIAN LASER PULSE
811
Optodynamic studies of Er:YAG laser induced microexplosions in dentin
812
Optodynamic studies of Er:YAG laser interaction with wood
813
Optodynamics of laser ablation of graduation lines in chromium thin film on glass
814
Opto-electrical and density functional theory analysis of poly(2,7-carbazole-alt-thieno[3,4-c]pyrrole-4,6-dione) and photovoltaic behaviors of bulk heterojunction structure
815
Optoelectrical and magnetic characteristics of Mn doped Zn1−xSnxO nanorods Original Research Article
816
Opto-electrical and morphological characterization of water soluble conjugated polymers for eco-friendly hybrid solar cells
817
Opto-electrical characterization of infrared sensors based on carbon nanotube films
818
Opto-electrical characterization of γ-In2Se2.5Te0.5thin layers☆1
819
Opto-electrical properties of amorphous carbon thin film deposited from natural precursor camphor
820
Opto-electrical properties of Ti-doped In2O3 thin films grown by pulsed laser deposition
821
Optoelectrochemical sensor for lead based on electrochemically assisted solvent extraction
822
Optoelectromechanical switch array with passively aligned free-space optical components
823
Optoelectronic analysis of the Cotrel–Dubousset instrumentation
824
Optoelectronic and dielectric properties of GaAsxSb1-x ternary alloys
825
Optoelectronic and microwave characteristics of silver coated indium bumps for low temperature flip-chip applications
826
Optoelectronic and nonlinear optical properties of tBu4PcTiO/polymer composite materials
827
Optoelectronic and thermoelectric properties in Ga doped β- PbS2 nanostructured thin films
828
Optoelectronic and transport properties of Zintl phase KBa2Cd2Sb3 compound
829
Optoelectronic approach to adaptive radio-frequency transversal filter implementation with negative coefficients by using optical spectrum shaping
830
Optoelectronic behavior of bischromophoric dyads exhibiting Zn2+/F− ions induced “turn-On/Off” fluorescence
831
Optoelectronic behavior of conjugated polymer/silicon heterojunctions
832
Optoelectronic characteristics of CdTe/HgTe/CdTe quantum-dot quantum-well nanoparticles
833
Optoelectronic characteristics of close-packed HgTe nanoparticles in the infrared range
834
Optoelectronic characterization of blue InGaN/GaN LEDS grown by MBE
835
Optoelectronic devices based on evaporated pentacene films
836
Optoelectronic devices based on para-sexiphenyl films grown by Hot Wall Epitaxy
837
Optoelectronic devices based on ultra-violet light sensitive PVK:PCBM layers
838
Opto-electronic displacement gauge based on speckle interferometer
839
Optoelectronic evaluation of the nanostructuring approach to chalcopyrite-based intermediate band materials
840
Optoelectronic interconnection technology in the HOLMS system
841
Optoelectronic logical system EX-OR
842
Optoelectronic millimeter-wave synthesis using an optical frequency comb Generator, optically injection locked lasers, and a unitraveling-carrier photodiode
843
Optoelectronic multichip module packaging technologies and optical input/output interface chip-level packages for the next generation of hardware systems
844
Optoelectronic performance of GaN-based UV photodetectors
845
Optoelectronic performance of GaN-based UV photodetectors
846
Optoelectronic Performances of Au and CuO Nanoparticles Incorporated Organic Photovoltaic Devices
847
Optoelectronic plethysmography and locomotion: Identification and filtering of the movement artefacts
848
Opto-electronic Polymer Thin Films Deposited by Glow Discharge Plasma Technique: A Review
849
Optoelectronic properties of 2-D and 3-D-grown GaInNAs//GaAs QW light emitting diodes and laser diodes
850
Opto-electronic properties of adamantane and hydrogen-terminated sila- and germa-adamantane: A comparative study
851
Optoelectronic properties of a-Si1−xGex:H thin films
852
Optoelectronic properties of chemically deposited Bi2S3 thin films and the photovoltaic performance of Bi2S3/P3OT solar cells
853
Optoelectronic properties of chlorine- and oxygen-doped CdTe thin films
854
Opto-electronic properties of chromium doped indium–tin-oxide films deposited at room temperature
855
Optoelectronic properties of Cr-substituted II–VI semiconductors
856
Optoelectronic properties of Cu1−xPtxFeO2 (0 ≤ x ≤ 0.05) delafossite for p-type transparent conducting oxide
857
Optoelectronic properties of Eu- and H-codoped CdO films
858
Optoelectronic properties of fluorine-doped silicon nitride thin films
859
Optoelectronic properties of graphene oxide thin film processed by cost-effective route
860
Optoelectronic properties of hot-wire silicon layers deposited at 100 °C
861
Optoelectronic properties of InAs1−xPx semiconducting alloys
862
Opto-electronic properties of molybdenum doped indium tin oxide nanostructured thin films prepared via sol–gel spin coating
863
Optoelectronic Properties of PbS Films: Effect of Carrier Gas
864
Optoelectronic properties of RNA–polyaniline–dendritic gold nanobiocomposite
865
Opto-electronic properties of rutile SnO2 and orthorhombic SnS and SnSe compounds
866
Optoelectronic properties of sexithiophene single crystals
867
Opto-electronic properties of the ternary alloy Hg1−xCdxTe
868
Opto-electronic properties of titania nanotubes
869
Opto-electronic properties of titanium-doped indium–tin-oxide films deposited by RF magnetron sputtering at room temperature
870
Optoelectronic properties of ZnO nanowires deposited under different zinc nitrate/hexamine ratio concentrations
871
Optoelectronic quantum telecommunications based on spins in semiconductors
872
Optoelectronic study and annealing stability of room temperature pulsed laser ablated ZnSe polycrystalline thin films
873
Optoelectronic switching of addressable self-assembled monolayer molecular junctions
874
Optoelectronic symbolic substitution based canonical modified signed-digit arithmetic
875
Optoelectronic transport mechanism from subband infrared absorption and tunneling regeneration
876
Optoelectronical Properties of a Metalloid-Doped B12N12 Nano-Cage
877
Optoelectronics experiments for first-year engineering students
878
Optoelectronics of solar cells: Greg P. Smested. Bellingham, Washington, USA: SPIE Press, 2002, 100 pages, £35.50, ISBN 0-8194-4440-5.
879
Optoelectronics-VLSI system integration: Technological challenges
880
Optofluidic dye lasers
881
Optofluidic integration for microanalysis
882
Optofluidic solar concentrators using electrowetting tracking: Concept, design, and characterization
883
Optofluidic waveguides: I. Concepts and implementations
884
Optofluidic waveguides: II. Fabrication and structures
885
Optofluidics technology based on colloids and their assemblies
886
Optofluidics: a novel generation of reconfigurable and adaptive compact architectures
887
Optogalvanic and pseudosonic wave spectroscopies in oscillating d.c. discharges
888
Optogalvanic spectrum of Ar excimers in a dc discharge with supersonic expansion
889
Optogenetic control of arousal and brain reward
890
Optogenetics 3.0
891
Optogenetics for Retinal Disorders
892
Optogenetics, Tools and Applications in Neurobiology
893
Optogenetics: A new tool for cancer investigation and treatment
894
Optogenetics: Control of Brain Using Light
895
Optokinetic stimulation affects temporal estimation in healthy humans
896
Optomechanical actuation using intercalated graphite
897
Opto-mechanical characterization of hydrogen storage properties of Mg–Ni thin film composition spreads
898
Optomechanical glass matrix composites
899
Optomechanical glass matrix composites
900
Optomechanical scanning systems for microstereolithography (MSL): Analysis and experimental verification
901
OPTO-MECHANICAL SYSTEM FOR THE ALIGNMENT OF A GAS GUN BARREL
902
Optomechanical trans-to-cis and cis-to-trans isomerization and unusual photophysical behavior of fac-[Re(CO)3(phen)(CNstpy)]+
903
Opto-mechatronic systems handbook techniques and applications
904
Optometric Practice in Private Sector Around Kuala Lumpur and Klang Valley: A Preliminary Study
905
Optoreflectometry Determination of the Resonance Properties of a Vocal Fold
906
Optosensing of cationic surfactants based on host–guest chemistry Original Research Article
907
Optosensing properties of fac-Re(CO)3(dpknph)Cl (dpknph=di-2-pyridyl ketone p-nitrophenyl hydrazone)
908
Optosensing properties of fac-Re(CO)3(dpknph)Cl (dpknph=di-2-pyridyl ketone p-nitrophenyl hydrazone) toward chemotactic N-formylamino acids
909
Optospectroscopic Detection of Primary Reactions Associated with the Graviperception of Phycomyces. Effects of Micro- and Hypergravity
910
Opto-structural characterization of gamma irradiated Bayfol polymer track detector
911
Opto-Thermal Mathematical Modeling and Inverse Depth Profiling Using Genetic Algorithm
912
Opt-out” testing for HIV in Africa: a caution
913
Opto-VLSI-based dynamic optical splitter
914
Optymalizacja chemio- i radioterapii w leczeniu I linii chłoniaka Hodgkina
915
Optymalizacja molekularnego monitorowania leczenia chorych na przewlekłą białaczkę szpikową
916
Optymalny zakres badań cytometrycznych wykorzystywanych dla celów diagnostyki ciężkich złożonych niedoborów odporności
917
OPUCEM: A library with error checking mechanism for computing oblique parameters Original Research Article
918
Opuntia ficus indica extract protects against chlorpyrifos-induced damage on mice liver
919
Opuntia Ficus Indica Seed Oil:Characterization and Application in Corrosion Inhibition of Carbon Steel in Acid Medium
920
Opuntia spp mucilageʹs: a functional component with industrial perspectives
921
OPUS and routine angiography
922
OPUS and routine angiography
923
Opus simulation of a wheat/sugarbeet plot near Neuenkirchen, Germany
924
Opus simulation of a wheat/sugarbeet plot near Neuenkirchen, Germany
925
Opus simulation of water dynamics and nitrate transport in a field plot
926
Opus simulation of water dynamics and nitrate transport in a field plot
927
OPUS-Dom: Applying the Folding-Based Method VECFOLD to Determine Protein Domain Boundaries
928
OPUS-PSP: An Orientation-dependent Statistical All-atom Potential Derived from Side-chain Packing
929
OPV devices based on functionalized lanthanide complexes for application in UV–light detection
930
OQALI: A French database on processed foods
931
OQALI: A French database on processed foods
932
o-Quinone involvement in the prooxidant tendency of a mixture of quercetin and caffeic acid
933
o-Quinone methide based approach to isoflavans: application to the total syntheses of equol, 3′-hydroxyequol and vestitol
934
o-Quinone methides: intermediates underdeveloped and underutilized in organic synthesis
935
OR and the management of electronic services
936
OR and the management of electronic services – EURO’2004
937
OR application in Spain. A brief review
938
OR applied to health services: Planning for the future with scarce resources
939
OR for better management of sustainable development
940
OR in developing countries: A review
941
OR in Europe: Facts about EURO member societies
942
OR in healthcare: A European perspective
943
OR in Portugal: Past achievements and current perspectives
944
OR in practice: Results of a survey in the United Arab Emirates
945
OR Models for Maintenance Management and Quality Control
946
OR practice in Greece: Status and challenges
947
OR practice in South Africa
948
OR software — ORSEP Operations Research Software Exchange Program Edited by Professor H.W. Hamacher GP — A C language implementation of genetic programming,
949
OR software - ORSEP operations research software exchange program Edited by Professor H.W. Hamacher K_TREE/K_SUBGRAPH: A program package for minimal weighted K-cardinality trees and subgraphs
950
OR Utopia
951
OR, Ethics and Decisions: the OATH of PROMETHEUS
952
OR/MS research in disaster operations management
953
ORAC and TEAC assays comparison to measure the antioxidant capacity of food products
954
ORAC of chitosan and its derivatives
955
Oracally efficient spline smoothing of nonlinear additive autoregression models with simultaneous confidence band
956
Oracle properties of SCAD-penalized support vector machine
957
Oracle Semantics for Prolog
958
Oracle-polynomial-time approximation of largest simplices in convex bodies Original Research Article
959
Oracles and Relativizations of the P =? NP Question for Several Structures
960
Oracles, draughtsmen, and agents: the nature of knowledge and creativity in design and the role of IT
961
ORACM: Online region-based active contour model
962
Orai1 and STIM1 Are Critical for Breast Tumor Cell Migration and Metastasis
963
Oral -arginine improves endothelium-dependent dilatation and reduces monocyte adhesion to endothelial cells in young men with coronary artery disease
964
ORAL – SYSTEMIC PARADIGM: ASSESSING MEDICAL STUDENTS’ KNOWLEDGE, ATTITUDE AND PRACTICE OF DENTISTRY
965
Oral (gavage), in utero and postnatal exposure of Sprague–Dawley rats to low doses of tributyltin chloride. Part 1: Toxicology, histopathology and clinical chemistry
966
Oral (gavage), in utero and post-natal exposure of Sprague–Dawley rats to low doses of tributyltin chloride: Part II: effects on the immune system
967
Oral 17β-estradiol and medroxyprogesterone acetate therapy in postmenopausal women increases HDL particle size
968
Oral 28-day and developmental toxicity studies of (R)-3-hydroxybutyl (R)-3-hydroxybutyrate
969
Oral 5-Aminosalicylate, Mesalamine Suppository, and Mesalamine Enema as Initial Therapy for Ulcerative Proctitis in Clinical Practice with Quality of Care Implications
970
Oral absorption and metabolism of quercetin and sugar-conjugated derivatives in specific transport systems
971
Oral Absorption of Mesobuthus eupeus Scorpion Venom in Mice
972
Oral absorption of phytosterols and emulsified phytosterols by Sprague-Dawley rats
973
Oral Absorption Tests: Absorption Site of Each Substrate
974
Oral acute toxic class method: A successful alternative to the oral LD50 test
975
Oral Acute Toxicity, Influence on the Gastrointestinal Microbiota and In Vivo Anti-salmonellosis Effect of Zizyphus lotus (L.) and Ruta chalepensis (L.) Essential Oils
976
Oral Administrated Pesticides Residual Activity On Rat Kidney Function
977
Oral administration of 1,25-dihydroxyvitamin D3 completely protects NOD mice from insulin-dependent diabetes mellitus
978
Oral administration of a live Aro attenuated Salmonella vaccine strain expressing 14-kDa Schistosoma mansoni fatty acid-binding protein induced partial protection against experimental schistosomiasis
979
Oral administration of a nephrotoxic dose of potassium bromate, a food additive, alters renal redox and metabolic status and inhibits brush border membrane enzymes in rats
980
Oral administration of a turmeric extract inhibits erythrocyte and liver microsome membrane oxidation in rabbits fed with an atherogenic diet
981
Oral administration of a turmeric extract inhibits LDL oxidation and has hypocholesterolemic effects in rabbits with experimental atherosclerosis
982
Oral administration of alanyl-glutamine and glutamine improve random pattern dorsal skin flap survival in rats
983
Oral Administration of Alginate Oligosaccharide from Padina sp. Enhances Tolerance of Oxygen Exposure Stress in Zebrafish (Danio rerio)
984
Oral administration of an anti-inflammatory does not compromise the efficacy of intra-testicular injection of zinc gluconate as a contraceptive for dogs
985
Oral Administration of Avocado Soybean Unsaponifiables (ASU) Reduces Ischemic Damage in the Rat Hippocampus
986
Oral administration of beta-1,3/1,6-glucan Macrogard® fails to enhance the mucosal immune response following oral F4 fimbrial immunisation in gnotobiotic pigs
987
Oral administration of beta-1,3/1,6-glucan Macrogard® fails to enhance the mucosal immune response following oral F4 fimbrial immunisation in gnotobiotic pigs
988
Oral administration of bifidobacterium longum culture condensate in a diet-restricted murine peritonitis model enhances polymorphonuclear neutrophil recruitment into the local inflammatory site
989
Oral administration of bovine lactoferrin upregulates neutrophil functions in a dog with familial β2-integrin-related neutrophil dysfunction
990
Oral administration of bovine lactoferrin upregulates neutrophil functions in a dog with familial β2-integrin-related neutrophil dysfunction
991
Oral administration of crocin-loaded solid lipid nanoparticles inhibits neuroinflammation in a rat model of epileptic seizures by activating SIRT1 expression
992
Oral administration of dihydroartemisinin and ferrous sulfate retarded implanted fibrosarcoma growth in the rat
993
Oral administration of Eclipta alba leaf aqueous extract enhances the non-specific immune responses and disease resistance of Oreochromis mossambicus
994
Oral administration of fish-oil induces high levels of seric TNF in Trypanosoma cruzi infected C57BL/6 mice
995
Oral Administration of Fucoxanthin Increases Plasma Fucoxanthinol Concentration and Antioxidative Ability and Improves Meat Color in Broiler Chicks
996
Oral administration of garlic powder (Allium sativum) on growth performance and survival rate of Carassius auratus fingerlings
997
Oral Administration of Ginger Rhizome Powder and Postoperative Inflammation Indices in Ovariohysterectomized Dogs
998
Oral administration of Ginkgolide B alleviates hypoxia-induced neuronal damage in rat hippocampus by inhibiting oxidative stress and apoptosis
999
Oral administration of grape polyphenol extract ameliorates cerebral ischemia/reperfusion-induced neuronal damage and behavioral deficits in gerbils: comparison of pre- and post-ischemic administration
1000
Oral administration of Gum Arabic: effects on haematological parameters and oxidative stress markers in Mugil cephalus
