ليست عنوان مقالات لاتين Microstructure, tensile properties and creep behavior of Mg–4Al–2Sn containing Ca alloy produced by different casting technologies Microwave absorption measurements in the complex perovskite Pb(Fe0.5Ta0.5)O3: Detection of short-range orderly regions

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Microstructure, tensile properties and creep behavior of Mg–4Al–2Sn containing Ca alloy produced by different casting technologies

2

Microstructure, tensile properties and electrochemical behavior of Pb alloy–45 vol.% fly ash microballoon composites

3

Microstructure, tensile properties and fracture behavior of high temperature Al–Si–Mg–Cu cast alloys

4

Microstructure, Tensile Properties and Heat Treatment Process of Spray Formed FGH95 Superalloy Original Research Article

5

Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites

6

Microstructure, tensile strength and wear behaviour of Al–Sc alloy

7

Microstructure, tensile strength and wear behaviour of Al–Sc alloy

8

Microstructure, tensile strength and wear behaviour of Al–Sc alloy

9

Microstructure, tensile, and creep behavior of O+BCC Ti2AlNb alloys processed using induction-float-zone melting

10

Microstructure, texture and grain boundaries character distribution evolution of ferritic stainless steel during rolling process

11

Microstructure, texture and magnetic properties of strip casting Fe–6.2 wt%Si steel sheet

12

Microstructure, texture and mechanical properties of a hot rolled Mg–6.5Gd–1.3Nd–0.7Y–0.3Zn alloy

13

Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting Original Research Article

14

Microstructure, texture and mechanical properties of as-extruded Mg–Zn–Er alloys

15

Microstructure, texture and mechanical properties of pure copper processed by ECAP and subsequent cold rolling

16

Microstructure, texture and oral processing: New ways to reduce sugar and salt in foods

17

Microstructure, texture and residual stress in a friction-stir-processed AZ31B magnesium alloy Original Research Article

18

Microstructure, texture and seismic anisotropy of the lithospheric mantle above a mantle plume: Insights from the Labait volcano xenoliths (Tanzania)

19

Microstructure, texture and shape memory effect in Ni25Ti50Cu25 ribbons and strips

20

Microstructure, Texture, and Formability of Nb+Ti Stabilized High Purity Ferritic Stainless Steel Original Research Article

21

Microstructure, texture, and mechanical properties of electron-beam melted Ti–6Al–4V

22

Microstructure, texture, and mechanical properties of electron-beam melted Ti–6Al–4V

23

Microstructure, texture, and mechanical properties of friction stir spot welded rare-earth containing ZEK100 magnesium alloy sheets

24

Microstructure, texture, grain boundaries in recrystallization regions in pure Cu ECAE samples

25

Microstructure, texture, grain boundaries in recrystallization regions in pure Cu ECAE samples

26

Microstructure, texture, property relationship in thermo-mechanically processed ultra-low carbon microalloyed steel for pipeline application

27

Microstructure, thermal and dielectric properties of homogeneous bismaleimide-triazine/barium titanate nanocomposite films

28

Microstructure, thermal and mechanical response of AZ51/Al2O3 nanocomposite with 2 wt.% Ca addition

29

Microstructure, thermal behavior and mechanical properties of squeeze cast SiC, ZrO2 or C reinforced ZA27 composites

30

Microstructure, thermal shock resistance and thermal emissivity of plasma sprayed LaMAl11O19 (M = Mg, Fe) coatings for metallic thermal protection systems

31

Microstructure, thermomechanical and shape memory properties of two-phase Ni–Mn–Fe–Ga high-temperature shape memory alloys with B addition

32

Microstructure, thermooxidation and mechanical behavior of a novel highly linear, vitamin E stabilized, UHMWPE

33

Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0 ≤ x ≤2) high-entropy alloys

34

Microstructure, thermo-physical and mechanical properties of spray-deposited Si–30Al alloy for electronic packaging application

35

Microstructure, topology and X-ray diffraction in Ag-metal reinforced polymer of polyvinyl alcohol of thin laminates

36

Microstructure, vertical strain control and tunable functionalities in self-assembled, vertically aligned nanocomposite thin films Original Research Article

37

Microstructure, wear and high temperature oxidation resistance of nitrided TiAl based alloys

38

Microstructure, wear and high temperature oxidation resistance of nitrided TiAl based alloys

39

Microstructure, wear and high-temperature oxidation resistance of laser clad Ti5Si3/γ/TiSi composite coatings on γ-TiAl intermetallic alloy

40

Microstructure, wettability and optical characteristics of ZnO/In2O3 thin films

41

Microstructure/mechanical properties relationship in electrodeposited Ni/Cu nanolaminates

42

Microstructure/mechanical properties relationship in electrodeposited Ni/Cu nanolaminates

43

Microstructure/properties relationship in Fe-based nanomaterials

44

Microstructure: Surface and cross-sectional studies of hydroxyapatite formation on the surface of white Portland cement paste in vitro

45

Microstructure; bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling

46

Microstructure-based 3D finite element modelling of lattice misfit and long-range internal stresses in creep-deformed nickel-base superalloy single crystals

47

Microstructure-based 3D finite element modelling of lattice misfit and long-range internal stresses in creep-deformed nickel-base superalloy single crystals

48

microstructure-based analysis of cyclic plasticity of pearlitic steels with Hill s selfconsistent scheme incorporating general anisotropic Eshelby tensor

49

Microstructure-based analysis of thermal- and mechanical behaviors of W/CuCrZr composites and porous W coating

50

Microstructure-based constitutive law of plastic deformation

51

Microstructure-based constitutive modeling for the large intestine validated by histological observations

52

Microstructure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions Original Research Article

53

Microstructure-based crystal plasticity modeling of cyclic deformation of Ti–6Al–4V

54

Microstructure-based damage and fracture modelling of alumina coatings

55

Microstructure-based deep-drawing simulation of knitted fabric reinforced thermoplastics by homogenization theory

56

Microstructure-based description for the mechanical behavior of single pearlitic colony

57

Microstructure-based evaluation of the influence of woven architecture on permeability by asymptotic homogenization theory

58

Microstructure-based fatigue modeling of cast A356-T6 alloy

59

Microstructure-based finite element analysis of failure prediction in particle-reinforced metal–matrix composite

60

Microstructure-based finite element analysis of strain localization behavior in AA5754 aluminum sheet Original Research Article

61

Microstructure-based laser-driven free-electron laser

62

Microstructure-based laser-driven free-electron laser

63

Microstructure-based micromechanical prediction of elastic properties in hydrating cement paste

64

Microstructure-based model for the static mechanical behaviour of multiphase steels Original Research Article

65

Microstructure-based modeling of crack growth in particle reinforced composites

66

Microstructure-based modeling of hydrogen assisted cracking in pearlitic steels

67

Microstructure-based modeling of hydrogen assisted cracking in pearlitic steels

68

Microstructure-based modeling of permeability of cementitious materials using multiple-relaxation-time lattice Boltzmann method

69

Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder Original Research Article

70

Microstructure-based modeling of the deformation behavior of particle reinforced metal matrix composites

71

Microstructure-based modeling of the diffusivity of cement paste with micro-cracks

72

Microstructure-based modeling of the influence of particle spatial distribution and fracture on crack growth in particle-reinforced composites Original Research Article

73

Microstructure-based modeling of water diffusivity in cement paste

74

Microstructure-based modelling and experimental investigation of crack propagation in glass–alumina functionally graded materials

75

Microstructure-based modelling of arbitrary deformation histories of filler-reinforced elastomers

76

Microstructure-based modelling of fracture in progressively drawn pearlitic steels

77

Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy Original Research Article

78

Microstructure-based modelling of localized anodic dissolution in pearlitic steels

79

Microstructure-based modelling of localized anodic dissolution in pearlitic steels

80

Microstructure-based multiscale modeling of elevated temperature deformation in aluminum alloys Original Research Article

81

Microstructure-based multistage fatigue modeling of a cast AE44 magnesium alloy

82

Microstructure-based multistage fatigue modeling of aluminum alloy 7075-T651

83

Microstructure-based Simulation of Plastic Deformation Behavior of SiC Particle Reinforced Al Matrix Composites

84

Microstructure-based simulation of thermomechanical behavior of composite materials by object-oriented finite element analysis

85

Microstructure-based stress analysis and evaluation for porous ceramics by homogenization method with digital image-based modeling

86

Microstructure-conductivity correlation for hot-pressed 8YSZ powders

87

Microstructure-controlled interdiffusion of Cu/Co/Au thin films investigated by three-dimensional atom probe

88

Micro-structured alumina hollow fibre membranes – Potential applications in wastewater treatment

89

Micro-structured analytical instrumentation for the analysis of liquids

90

Microstructured and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2Sn0.4Zn0.4O22 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Metho

91

Microstructured Au/Ni-fiber catalyst: Galvanic reaction preparation and catalytic performance for low-temperature gas-phase alcohol oxidation

92

Microstructured conducting polymers

93

Micro-structured electrode arrays: atmospheric pressure plasma processes and applications

94

Micro-structured electrode arrays: Plasma based sterilization and coating over a wide pressure range

95

Microstructured extremely thin absorber solar cells

96

Microstructured hollow fibers for ultrafiltration

97

Microstructured light guides overcoming the two-dimensional concentration limit

98

Microstructured liquid metal ion and electron sources (MILMIS/MILMES)

99

Micro-structured membranes for electricity generation by reverse electrodialysis

100

Microstructured nanoparticle membrane sensor based on non-Cottrellian diffusion

101

Microstructured optical fibre with 16 linearly arrayed antiguided cores fabricated through stacking

102

Microstructured polymer tips for scanning near-field optical microscopy

103

Microstructured polymer tips for scanning near-field optical microscopy

104

Microstructured proton-conducting membranes by synchrotron-radiation-induced grafting

105

Micro-structured reactors as a tool for chiral modifier screening in gas–liquid–solid asymmetric hydrogenations

106

Microstructured reactors for catalytic reactions

107

Microstructured reactors for diesel steam reforming, water-gas shift and preferential oxidation in the kiloWatt power range

108

Micro-structured reactors for gas phase reaction

109

Micro-structured reflector surfaces for a stationary asymmetric parabolic solar concentrator

110

Microstructured semiconductor neutron detectors

111

Microstructured semiconductor neutron detectors

112

Microstructured silicon surfaces for field emission devices

113

Micro-structured smart hydrogels with enhanced protein loading and release efficiency

114

Microstructured spacers for submerged membrane filtration systems

115

Micro-structured string-reactor for autothermal production of hydrogen

116

Microstructured ternary solid dispersions to improve carbamazepine solubility

117

Microstructured titanium regulates interleukin production by osteoblasts, an effect modulated by exogenous BMP-2

118

Microstructured ZnO photoelectrode grown on the sputter-deposited ZnO passivating-layer for improving the photovoltaic performances

119

Microstructure-dependent couple stress theories of functionally graded beams

120

Microstructure-dependent fatigue damage process in short fiber reinforced plastics

121

Microstructure-dependent giant dielectric response in CaCu3Ti4O12 ceramics

122

Microstructure-dependent humidity sensitivity of porous MgFe2O4–CeO2 ceramic

123

Microstructure-dependent humidity sensitivity of porous MgFe2O4–CeO2 ceramic

124

Microstructure-dependent magnetic properties of Li-Cd ferrites

125

Microstructure-dependent magnetization of La0.67Ba0.33MnO3−δ manganites

126

Microstructure-dependent nonlinear viscoelasticity due to extracellular flow within cellular structures

127

Microstructure–electrical conductivity relationships in nanocrystalline ceria thin films

128

Microstructure–fracture toughness correlation in an aircraft structural component alloy Ti–5Al–5V–5Mo–3Cr

129

Microstructure–fracture toughness relationship of vanadium alloy/stainless steel brazed joints

130

Microstructure–function relationships of heat-induced gels of porcine haemoglobin

131

Microstructure–grain orientation relationship in coarse grain nickel cold-rolled to large strain

132

Microstructure–hardness relationship in quenched and partitioned medium-carbon and high-carbon steels containing silicon

133

Microstructure–hardness relationship in the fusion zone of TRIP steel welds

134

Microstructure-hardness relationship of Al–(L12)Al3Ti nanocomposites prepared by rapid solidification processing

135

Microstructure-induced hotspots in the thermal and elastic responses of granular media

136

Microstructure-induced thermal stresses in pyrolytic carbon matrices at temperatures up to 2900 °C

137

Microstructure-informed modelling of damage evolution in cement paste

138

Microstructure-level modeling and simulation of the flexural behavior of ceramic tool materials

139

Microstructure-linked strength properties and impact response of conventional and recycled concrete reinforced with steel and synthetic macro fibres

140

Microstructure–low cycle fatigue behaviour relationships in a PM γ-TiAl alloy

141

Microstructure–mechanical properties correlation in siliconized silicon carbide ceramics Original Research Article

142

Microstructure–mechanical properties relations in SiC–TiB2 composite

143

Microstructure–mechanical property relationships in ultrafine-grained NbZr Original Research Article

144

Microstructure-mechanical-tribological property correlation of multistage spark plasma sintered tetragonal ZrO2

145

Microstructure-Mechanics Interactions in Modeling Chip Segmentation during Titanium Machining

146

Microstructure-microhardness relations in parallel-fibered and lamellar bone

147

Microstructure-microhardness relationships in friction stir welded AA5251

148

Microstructure–mobility correlation in self-organised, conjugated polymer field-effect transistors

149

Microstructure-performance relations of ultra-high-performance concrete accounting for effect of alpha-quartz-to-coesite silica phase transformation

150

Microstructure–permeability relation of porous β-Si3N4 ceramics

151

Microstructure–polarization relations in nickel/ gadolinia-doped ceria anode for intermediate-temperature solid oxide fuel cells

152

Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels

153

Microstructure–properties correlation of pressure die cast eutectic aluminum–silicon alloys for escalator steps (Part I)

154

Microstructure-properties correlation of pressure die cast eutectic aluminum–silicon alloys for escalator steps (Part II)

155

Microstructure–properties relationship in a one-step quenched and partitioned steel

156

Microstructure–properties relationship of TLP-bonded GTD-111 nickel-base superalloy

157

Microstructure-property characterization of a friction-stir welded joint between AA5059 aluminum alloy and high density polyethylene

158

Microstructure-property modifications in plasma sprayed 20 wt.% yttria stabilized zirconia electrolyte by spark plasma sintering (SPS) technique

159

Microstructure-property modifications in plasma sprayed 20 wt.% yttria stabilized zirconia electrolyte by spark plasma sintering (SPS) technique

160

Microstructure-property relations in composite yttria-substituted zirconia solid electrolytes

161

Microstructure–property relations of a steel powder metal under varying temperatures, strain rates, and stress states

162

Microstructure–property relations of reactively magnetron sputtered VCxNy films

163

Microstructure–property relationship in explosively welded duplex stainless steel–steel

164

Microstructure–property relationship in explosively welded duplex stainless steel–steel

165

Microstructure–property relationship in highly ductile Au–Cu thin films for flexible electronics

166

Microstructure-property relationship in high-strength MgO–Al2O3–SiO2–TiO2 glass-ceramics

167

Microstructure–property relationship in textured ZnO-based varistors Original Research Article

168

Microstructure-Property Relationships in an Erbium-Modified Al-Si-Mg Alloy

169

Microstructure–property relationships in pressureless-sintered carbon nanotube/alumina composites

170

Microstructure-related properties at 193 nm of MgF^2 and GdF3 films deposited by a resistive-heating boat

171

Microstructures and ablation properties of 3D 4-directional Cf/ZrC–SiC composite in a plasma wind tunnel environment

172

Microstructures and ablation properties of C/C−SiC−ZrC composites prepared using C/C skeletons with various densities

173

Microstructures and abrasive wear performance of PTAW deposited Ni–WC overlays using different Ni-alloy chemistries

174

Microstructures and adiabatic shear bands formed by ballistic impact in steels and tungsten alloy

175

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

176

Microstructures and boundary populations in materials produced by equal channel angular extrusion

177

Microstructures and boundary populations in materials produced by equal channel angular extrusion

178

Microstructures and boundary populations in materials produced by equal channel angular extrusion

179

Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys

180

Microstructures and creep behavior of as-cast and annealed heat-resistant Mg–4Al–2Sr–1Ca alloy

181

Microstructures and creep properties of Mg–4Al–(1–4) La alloys produced by different casting techniques

182

Microstructures and crystallographic preferred orientations of omphacite in Alpine eclogites: implications for the exhumation of (ultra-) high-pressure units

183

Microstructures and defect structures in ZrCr2 Laves phase based intermetallic compounds

184

Microstructures and deformation mechanisms of a G4 TiAl alloy produced by spark plasma sintering Original Research Article

185

Microstructures and dielectric properties of Ba0.5Sr0.5TiO3–Zn2TiO4 composite ceramics with low sintering temperature for tunable device applications

186

Microstructures and dielectric properties of Ba0.6Sr0.4TiO3–MgO ceramics prepared by non-aqueous gelcasting and dry pressing

187

Microstructures and dielectric properties of CaTiO3–LaSrAlO4 composite ceramics

188

Microstructures and dielectric properties of PZT thick films prepared by aerosol plasma deposition with microwave annealing

189

Microstructures and dielectric properties of spark plasma sintered Ba0.4Sr0.6TiO3/CaCu3Ti4O12 composite ceramics

190

Microstructures and dielectric properties of Y/Zn codoped BaTiO3 ceramics

191

Microstructures and dielectric relaxation behaviors of pure and tellurium doped CaCu3Ti4O12 ceramics prepared via vibro-milling method

192

Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening Original Research Article

193

Microstructures and dislocations in the stressed AZ91D magnesium alloys

194

Microstructures and dislocations in the stressed AZ91D magnesium alloys

195

Microstructures and dislocations in the stressed AZ91D magnesium alloys

196

Microstructures and dry sliding wear properties of in situ (Al3Zr + ZrB2)/Al composites

197

Microstructures and electrical conductance of silver nanocrystalline thin films on flexible polymer substrates

198

Microstructures and electrical conductivity of nanocrystalline ceria-based thin films

199

Microstructures and electrical properties of 0.5(Ba0.7Ca0.3)TiO3–0.5Ba(Zr0.2Ti0.8)O3 thin films prepared by a sol–gel route

200

Microstructures and electrical properties of calcium substituted LaFeO3 as SOFC cathode

201

Microstructures and electrical properties of La0.8Sr0.2MnO3 films synthesized by sol–gel method

202

Microstructures and electrical properties of lead zinc niobate–lead titanate–lead zirconate ceramics using microwave sintering

203

Microstructures and electrochemical characteristics of Mm0.3Ml0.7Ni3.55Co0.75Mn0.4Al0.3 hydrogen storage alloys prepared by mechanical alloying

204

Microstructures and electrochemical characteristics of the La0.75Mg0.25Ni2.5Mx (M=Ni, Co; x=0–1.0) hydrogen storage alloys

205

Microstructures and electrochemical hydrogen storage performances of La0.75Ce0.25Ni3.80Mn0.90Cu0.30(V0.81Fe0.19)x (x = 0–0.20) alloys

206

Microstructures and electrochemical performances of La2Mg(Ni0.85Co0.15)9 (, Cr, Ti; ) electrode alloys prepared by casting and rapid quenching

207

Microstructures and electrochemical performances of La2Mg(Ni0.85Co0.15)9Crx (x = 0–0.2) electrode alloys prepared by casting and rapid quenching

208

Microstructures and Electrochemical Properties of Cobalt-Free LaNi4.0Al0.2Fe0.4Cu0.4-xSnx (x = 0 ∼ 0.4) Electrode Alloys Prepared by Casting

209

Microstructures and electrochemical properties of LaNi3.55Co0.2−xMn0.35Al0.15Cu0.75(Fe0.43B0.57)x (x = 0–0.20) hydrogen storage alloys

210

Microstructures and electrochemical properties of LaNi3.8–xAlx hydrogen storage alloys

211

Microstructures and electrochemical properties of Mg0.9Ti0.1Ni1−xMx (M = Co, Mn; x = 0, 0.1, 0.2) hydrogen storage alloys

212

Microstructures and electrolytic properties of yttrium-doped ceria electrolytes: Dopant concentration and grain size dependences Original Research Article

213

Microstructures and environmental assessment of metallic NiCrBSi coatings manufactured via hybrid plasma spray process

214

Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-T6 sheets

215

Microstructures and fatigue fracture behavior of an Al–Cu–Mg–Ag alloy with a low Cu/Mg ratio

216

Microstructures and fatigue fracture behavior of an Al–Cu–Mg–Ag alloy with addition of rare earth Er

217

Microstructures and fatigue properties of electron beam welds with beam oscillation for heavy section TC4-DT alloy

218

Microstructures and fatigue properties of friction stir lap welds in aluminum alloy AA6061-T6

219

Microstructures and formation mechanism of W–Cu composite coatings on copper substrate prepared by mechanical alloying method

220

Microstructures and fracture behavior of glass-fiber reinforced PBT/PC/E-GMA elastomer blends—1: microstructures

221

Microstructures and fracture behaviors of B-free and B-doped Ir3Nb (L12) intermetallic compounds

222

Microstructures and fracture behaviors of B-free and B-doped Ir3Nb (L12) intermetallic compounds

223

Microstructures and fracture characteristics of spark plasma-sintered HAp–5 vol.% Ag composites

224

Microstructures and fracture features of cold-rolled low carbon steel sheet after annealing and mechanical stress concurrently loaded

225

Microstructures and friction-wear characteristics of bivalve shells

226

Microstructures and grain boundary conductivity of BaZr1−xYxO3 (x = 0.05, 0.10, 0.15) ceramics

227

Microstructures and hardness of as-quenched martensites (0.1–0.5%C) Original Research Article

228

Microstructures and hydrogen embrittlement of Ti–49Al alloy

229

Microstructures and hydrogen permeability of directionally solidified Nb–Ni–Ti alloys with the Nb–NiTi eutectic microstructure

230

Microstructures and hydrogen storage properties of as-cast and copper-mould-cast LaMg4Ni alloys

231

Microstructures and improved wear resistance of 3D needled C/SiC composites with graphite filler

232

Microstructures and interfaces in directionally solidified oxide–oxide eutectics

233

Microstructures and interfaces in Ni–Al martensite: comparing HRTEM observations with continuum theories

234

Microstructures and IR spectra of long amorphous SiO2/Si nanowires

235

Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings

236

Microstructures and lattice preferred orientations in experimentally deformed clinopyroxene aggregates

237

Microstructures and luminescent properties of Ce-doped transparent mica glass-ceramics

238

Microstructures and macroscopic conductivity of randomly packed and uniaxially pressed sphere compacts

239

Microstructures and magnetic properties of amorphous Fe–Si–B–Ni alloy ribbons

240

Microstructures and material properties of fibrous HAp/Al2O3–ZrO2 composites fabricated by multi-pass extrusion process

241

Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting Original Research Article

242

Microstructures and mechanical characteristics of electromagnetic casting and direct-chill casting 2024 aluminum alloys

243

Microstructures and mechanical characteristics of electromagnetic casting and direct-chill casting 2024 aluminum alloys

244

Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation

245

Microstructures and mechanical properties after heating of reinforcing 500 MPa class weldable steels produced by various processes (Tempcore, microalloyed with vanadium and work-hardened)

246

Microstructures and mechanical properties evaluation of hard chromized austenitic Fe–Mn–Al alloys

247

Microstructures and mechanical properties evaluation of TiAlN/CrSiN multilayered thin films with different bilayer periods

248

Microstructures and mechanical properties evolution during friction stir welding of SK4 high carbon steel alloy

249

Microstructures and mechanical properties evolution of an Al–Fe–Cu alloy processed by repetitive continuous extrusion forming

250

Microstructures and mechanical properties in B4C–CeO2 ceramics

251

Microstructures and mechanical properties in dissimilar AZ91/AZ31 spot welds

252

Microstructures and mechanical properties of 3D 4-directional, Cf/ZrC–SiC composites using ZrC precursor and polycarbosilane

253

Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding

254

Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding

255

Microstructures and mechanical properties of 60Si2CrVA steel by isothermal transformation at low temperature

256

Microstructures and mechanical properties of 8Y-FSZ ceramics with BaTiO3 additive

257

Microstructures and mechanical properties of a Cu-bearing ODS steel fabricated by mechanical alloying and hot extrusion

258

Microstructures and mechanical properties of a Cu–Zn alloy subjected to cryogenic dynamic plastic deformation

259

Microstructures and mechanical properties of a directionally solidified NiAl-Mo eutectic alloy

260

Microstructures and mechanical properties of a directionally solidified NiAl–Mo eutectic alloy Original Research Article

261

Microstructures and mechanical properties of a hot extruded Mg–4.45Zn–0.46Y–0.76Zr alloy plate

262

Microstructures and mechanical properties of a low-cost three-dimensional needled carbon/silicon carbide composite

263

Microstructures and mechanical properties of a two-layer B4C/Al–B4C/TiB2 composite

264

Microstructures and mechanical properties of age-formed 7050 aluminum alloy

265

Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing

266

Microstructures and mechanical properties of Al/Zn composites prepared by accumulative roll bonding and heat treatment

267

Microstructures and mechanical properties of Al2O3–C refractories with addition of microcrystalline graphite

268

Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

269

Microstructures and mechanical properties of Al2O3–C refractories with silicon additive using different carbon sources

270

Microstructures and mechanical properties of Al2O3–ZrO2–C refractories using silicon, microsilica or their combination as additive

271

Microstructures and mechanical properties of as-cast and as-extruded Mg-4.50Zn-1.13Ca (wt%) alloys

272

Microstructures and mechanical properties of as-cast Mg–5Al–0.4Mn–xNd (x = 0, 1, 2 and 4) alloys

273

Microstructures and mechanical properties of as-cast Mg–5Y–3Nd–Zr–xGd (x = 0, 2 and 4 wt.%) alloys

274

Microstructures and mechanical properties of AZ91 alloy with combined additions of Ca and Si

275

Microstructures and mechanical properties of AZ91D alloys with Y addition

276

Microstructures and mechanical properties of bulk AlFeNd(Cu,Si) alloys obtained through centrifugal force casting

277

Microstructures and mechanical properties of bulk nanocrystalline Fe3Al materials with 5, 10 and 15 wt.% Cr prepared by aluminothermic reaction

278

Microstructures and mechanical properties of carbon/carbon composites reinforced with carbon nanofibers/nanotubes produced in situ Original Research Article

279

Microstructures and mechanical properties of cast austenite stainless steels after long-term thermal aging at low temperature

280

Microstructures and mechanical properties of cast Nb–Ti–Si–Zr alloys

281

Microstructures and mechanical properties of Ce1−xCaxO2−y (x = 0.05, 0.1, 0.2) with different sintering temperatures

282

Microstructures and mechanical properties of Cf/SiC composites by precursor pyrolysis-hot pressing

283

Microstructures and mechanical properties of Cf/SiC composites by precursor pyrolysis-hot pressing

284

Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications

285

Microstructures and mechanical properties of commercial purity iron processed by asymmetric rolling

286

Microstructures and mechanical properties of commercial titanium foils processed via the melt overflow process

287

Microstructures and mechanical properties of commercial titanium foils processed via the melt overflow process

288

Microstructures and mechanical properties of CoTi(B2)-Co2TiAl(L21) pseudo-binary intermetallic compounds

289

Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures

290

Microstructures and mechanical properties of CVD-SiC coated PIP-C/SiC composites under high temperature

291

Microstructures and mechanical properties of dense particle gels: Microstructural characterisation

292

Microstructures and mechanical properties of directionally solidified NiAl–Mo and NiAl–Mo(Re) eutectic alloys

293

Microstructures and mechanical properties of directionally solidified NiAl–Mo and NiAl–Mo(Re) eutectic alloys

294

Microstructures and mechanical properties of directionally solidified Ti–45Al–8Nb–(W, B, Y) alloys

295

Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V

296

Microstructures and mechanical properties of engineered short fibre reinforced aluminium matrix composites

297

Microstructures and mechanical properties of engineered short fibre reinforced aluminium matrix composites

298

Microstructures and mechanical properties of engineered short fibre reinforced aluminium matrix composites

299

Microstructures and mechanical properties of extruded and heat treated Mg–6Zn–1Si–0.5Mn alloys

300

Microstructures and mechanical properties of extruded Mg–8Gd–0.4Zr alloys containing Zn

301

Microstructures and mechanical properties of Fe–14Cr–3W–Ti–Y2O3 steel with 1 wt.% Cu addition fabricated by a new method

302

Microstructures and mechanical properties of Fe–15% Cr–15% Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages

303

Microstructures and mechanical properties of Fe–28Al–5Cr/TiC composites produced by hot-pressing sintering

304

Microstructures and mechanical properties of Fe3Al-based Fe–Al–C alloys

305

Microstructures and mechanical properties of Fe–Al–Ta alloys with strengthening Laves phase

306

Microstructures and Mechanical Properties of Fe-Mn-(Al, Si) TRIP/TWIP Steels Original Research Article

307

Microstructures and mechanical properties of friction stir welds of 60% Cu–40% Zn copper alloy

308

Microstructures and mechanical properties of friction stir welds of 60% Cu–40% Zn copper alloy

309

Microstructures and mechanical properties of Gas Tungsten Arc Welded joints of new Al–Mg–Sc and Al–Mg–Er alloy plates

310

Microstructures and mechanical properties of heat-resistant high-pressure die-cast Mg–4Al–xLa–0.3Mn (x = 1, 2, 4, 6) alloys

311

Microstructures and mechanical properties of heat-resistant HPDC Mg–4Al-based alloys containing cheap misch metal

312

Microstructures and mechanical properties of heat-treated Al–5.0Cu–0.5Fe squeeze cast alloys with different Mn/Fe ratio

313

Microstructures and Mechanical Properties of Helical Bevel Gears Made by Mn-Cu Alloyed Austempered Ductile Iron Original Research Article

314

Microstructures and mechanical properties of hemp fabric reinforced organoclay–cement nanocomposites

315

Microstructures and mechanical properties of high performance Mg–4Y–2.4Nd–0.2Zn–0.4Zr alloy

316

Microstructures and mechanical properties of high performance Mg–6Gd–3Y–2Nd–0.4Zr alloy by indirect extrusion and aging treatment

317

Microstructures and mechanical properties of hot-pressed MoSi2–matrix composites reinforced with SiC and ZrO2 particles

318

Microstructures and mechanical properties of hot-rolled Nb-microalloyed TRIP steels by different thermo-mechanical processes

319

Microstructures and mechanical properties of HPT processed 6063 Al alloy

320

Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding

321

Microstructures and mechanical properties of interface between porcelain and Ni–Cr alloy

322

Microstructures and mechanical properties of liquid-phase sintered seeded silicon carbide

323

Microstructures and mechanical properties of magnesium alloy and stainless steel weld-joint made by friction stir lap welding

324

Microstructures and mechanical properties of mechanically alloyed V–4Cr–4Ti alloy dispersion strengthened by nano-particles

325

Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi–WC layers manufactured via hybrid plasma/laser process

326

Microstructures and mechanical properties of metastable Ti–30Zr–(Cr, Mo) alloys with changeable Young’s modulus for spinal fixation applications

327

Microstructures and mechanical properties of Mg/Mg and Mg/Al/Mg laminated composites prepared via warm roll bonding

328

Microstructures and mechanical properties of Mg–2Y–1Mn–1–2Nd alloys fabricated by extrusion

329

Microstructures and mechanical properties of Mg–8Gd–0.6Zr–xNd (x = 0, 1, 2 and 3 mass%) alloys

330

Microstructures and mechanical properties of modified AZ31–Zr–Sc alloys

331

Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys

332

Microstructures and mechanical properties of nanoTiN modified TiC-based cermets for the milling tools

333

Microstructures and mechanical properties of nanoTiN modified TiC-based cermets for the milling tools

334

Microstructures and mechanical properties of nanoTiN modified TiC-based cermets for the milling tools

335

Microstructures and mechanical properties of Nb/Nb5Si3 composites alloyed with W, Mo and W–Mo fabricated by spark plasma sintering

336

Micro-structures and mechanical properties of Nb/Re layered composite produced by CVD

337

Microstructures and mechanical properties of Nbss/Nb5Si3 in-situ composite prepared by electromagnetic cold crucible directional solidification

338

Microstructures and mechanical properties of Nb–Ti–C alloys

339

Microstructures and mechanical properties of Ni–Al–Fe–X intermetallics based on Ni–25Al–27.5Fe alloy

340

Microstructures and mechanical properties of organically modified silicate prepared under various process conditions

341

Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms

342

Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends

343

Microstructures and mechanical properties of powder injection molded Ti-6Al-4V/HA powder

344

Microstructures and mechanical properties of pure Al matrix composites reinforced by AlCuFe alloy particles

345

Microstructures and mechanical properties of pure Al matrix composites reinforced by AlCuFe alloy particles

346

Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion

347

Microstructures and mechanical properties of quasicrystal reinforced AZ31 matrix composites

348

Microstructures and mechanical properties of resistance spot welded magnesium alloy joints

349

Microstructures and mechanical properties of silicon nitride bonded silicon carbide ceramic foams

350

Microstructures and mechanical properties of silks of silkworm and honeybee

351

Microstructures and mechanical properties of spark plasma sintered Al–SiC composites containing high volume fraction of SiC

352

Microstructures and mechanical properties of spray-formed and squeeze-cast Al-25Si-0.89Cu1.0Ni-0.84Mg alloys in solutionized and aged conditions

353

Microstructures and mechanical properties of spray-formed and squeeze-cast Al–25Si–0.89Cu–1.0Ni–0.84Mg alloys in solutionized and aged conditions

354

Microstructures and mechanical properties of squeeze cast Al–5.0Cu–0.6Mn alloys with different Fe content

355

Microstructures and mechanical properties of Sr2Nb2O7-toughened 3Y-TZP ceramics

356

Microstructures and mechanical properties of surface-hardened layer produced on SKD 61 steel by plasma radical nitriding

357

Microstructures and mechanical properties of T92/Super304H dissimilar steel weld joints after high-temperature ageing

358

Microstructures and mechanical properties of the Mg–8Gd–4Y–Nd–Zn–3Si (wt%) alloy

359

Microstructures and mechanical properties of three-dimensional ceramic filler modified carbon/carbon composites

360

Microstructures and mechanical properties of Ti–24Al–17Nb (at.%) laser beam welding joints

361

Microstructures and mechanical properties of Ti–25Ni–25Cu (at.%) alloy ribbons

362

Microstructures and mechanical properties of Ti3SiC2/TiC–Al2O3 composites synthesized by reactive hot pressing

363

Microstructures and mechanical properties of Ti–45 at.%Ni–5 at.%Cu alloy ribbons containing Ti2Ni particles

364

Microstructures and mechanical properties of Ti–45Al–8.5Nb–(W,B,Y) alloy by SPS–HIP route

365

Microstructures and mechanical properties of TiAl alloys consolidated by spark plasma sintering

366

Microstructures and mechanical properties of TiB2 particle reinforced TiAl composites by plasma arc melting process

367

Microstructures and mechanical properties of TiB2 particle reinforced TiAl composites by plasma arc melting process

368

Microstructures and mechanical properties of Ti–Mo alloys cold-rolled and heat treated

369

Microstructures and mechanical properties of titanium alloy connecting rod made by powder forging process

370

Microstructures and mechanical properties of titanium/biodegradable-polymer FGM for bone tissue fabricated by spark plasma sintering method

371

Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing Original Research Article

372

Microstructures and mechanical properties of vacuum counter-pressure casting A357 alloys solidified under grade-pressurising: effects of melt temperature

373

Microstructures and mechanical properties of welded joints of novel 3Cr pipeline steel using an inhouse and two commercial welding wires

374

Microstructures and Mechanical Properties of X100 Pipeline Steel Strip Original Research Article

375

Microstructures and mechanical properties of injection molded 17-4PH stainless steel powder with nickel boride additions

376

Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel

377

Microstructures and mechanical responses of powder metallurgy non-combustive magnesium extruded alloy by rapid solidification process in mass production

378

Microstructures and microhardness evolutions of melt-spun Al–8Ni–5Nd–4Si alloy

379

Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion

380

Microstructures and microwave dielectric properties of (1 − y)La1−xSmx(Mg0.5Sn0.5)O3–yCa0.8Sm0.4/3TiO3 ceramics

381

Microstructures and microwave dielectric properties of Ba4LiNb3O12–BaWO4 composite ceramics

382

Microstructures and microwave dielectric properties of La1-xBx(Mg0.5Sn0.5)O3 ceramics

383

Microstructures and microwave dielectric properties of Li2O–Nb2O5–ZrO2 ceramics

384

Microstructures and multiferroic properties of textured Bi0.8La0.2FeO3 thin films

385

Microstructures and nano mechanical properties of the metal tungsten film

386

Microstructures and optical properties of Cu-doped ZnO films prepared by radio frequency reactive magnetron sputtering

387

Microstructures and oxygen diffusion at the LaMnO3 film/yttria-stabilized zirconia interface

388

Microstructures and phase equilibria of the transition metal corner in the Rh–Al–C and Ir–Al–C ternary systems

389

Microstructures and photoactivity of mesoporous anatase hollow microspheres fabricated by fluoride-mediated self-transformation

390

Microstructures and photocatalytic properties of Ag+ and La3+ surface codoped TiO2 films prepared by sol–gel method

391

Microstructures and photocatalytic properties of porous ZnO films synthesized by chemical bath deposition method

392

Microstructures and photoluminescence of barium titanate nanocrystals synthesized by the hydrothermal process

393

Microstructures and physical properties of “backfill” clays: comparison of residual and sedimentary montmorillonite clays

394

Microstructures and Properties in Simulated Heat-Affected Zones of 685 MPa Grade Copper-Bearing Steel Original Research Article

395

Microstructures and properties of 2099 Al-Li alloy

396

Microstructures and properties of a hot-extruded TiAl containing no Cr

397

Microstructures and properties of a hot-extruded TiAl containing no Cr

398

Microstructures and properties of Al2O3/Al–AlN composites by pressureless infiltration of Al-alloys

399

Microstructures and properties of Al2O3/Al–AlN composites by pressureless infiltration of Al-alloys

400

Microstructures and properties of Al–Zn–Mg–Mn alloy with trace amounts of Sc and Zr

401

Microstructures and properties of biomedical TiNbZrFe β-titanium alloy under aging conditions

402

Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes Original Research Article

403

Microstructures and properties of die casting components with various thicknesses made of AZ91D alloy

404

Microstructures and properties of direct-cooled microalloy forging steels

405

Microstructures and properties of electrical discharge strengthened layers on 65Mn steel

406

Microstructures and properties of Er-doped Al2O3 thin films synthesized by ion beam assisted deposition

407

Microstructures and properties of friction stir welded 409L stainless steel using a Si3N4 tool

408

Microstructures and properties of friction surfaced coatings in AISI 440C martensitic stainless steel

409

Microstructures and properties of high Cr content coatings on inner surfaces of carbon steel tubular components prepared by a novel mechanical alloying method

410

Microstructures and properties of high-entropy alloys

411

Microstructures and properties of in-situ NiAl–Al2O3 functionally gradient composites

412

Microstructures and properties of interpenetrating alumina/aluminium composites made by reaction of SiO2 glass preforms with molten aluminium

413

Microstructures and properties of interpenetrating alumina/aluminium composites made by reaction of SiO2 glass preforms with molten aluminium

414

Microstructures and properties of investment castings of γ-titanium aluminide

415

Microstructures and properties of investment castings of γ-titanium aluminide

416

Microstructures and properties of laser welding joint of super-eutectic ZA alloy

417

Microstructures and properties of low cycle fatigue of electrolytic A356 alloys

418

Microstructures and Properties of Melt-Spun and As-Cast Mg-20Gd Binary Alloy

419

Microstructures and properties of nanostructured thermal sprayed coatings using high-energy milled cermet powders

420

Microstructures and properties of NiAl–TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique

421

Microstructures and properties of plasma sprayed FeAl/CeO2/ZrO2 nano-composite coating

422

Microstructures and properties of powder metallurgy TiAl alloys

423

Microstructures and properties of powder metallurgy TiAl alloys

424

Microstructures and properties of sandwich plane laser-welded joint of hull steel

425

Microstructures and properties of semi-conductive Pb0.6Sr0.4TiO3 ceramics using PbTiO3-coated SrTiO3 powders

426

Microstructures and properties of Si3N4/TiN composites sintered by hot pressing and spark plasma sintering

427

Microstructures and properties of SiB0.5C1.5N0.5 ceramics consolidated by mechanical alloying and hot pressing

428

Microstructures and properties of silver-based contact material fabricated by hot extrusion of internal oxidized Ag–Sn–Sb alloy powders

429

Microstructures and properties of SnZn-xEr lead-free solders

430

Microstructures and Properties of Thermal Barrier Coatings Plasma-Sprayed by Nanostructured Zirconia Original Research Article

431

Microstructures and properties of titanium–copper lap welded joints by cold metal transfer technology

432

Microstructures and properties of ultrafine-grained tungsten produced by equal-channel angular pressing at low temperatures

433

Microstructures and Properties of X60 Grade Pipeline Strip Steel in CSP Plant Original Research Article

434

Microstructures and proton conduction behaviors of Dy-doped BaCeO3 ceramics at intermediate temperature

435

Microstructures and reaction kinetics of bainite transformation in Si-rich steels

436

Microstructures and reaction kinetics of bainite transformation in Si-rich steels

437

Microstructures and recrystallization behavior of severely hot-deformed tungsten

438

Microstructures and rheological properties of tilapia fish-scale collagen hydrogels with aligned fibrils fabricated under magnetic fields

439

Microstructures and rheology of a calcite-shale thrust fault

440

Microstructures and shape memory characteristics of dual-phase Co–Ni–Ga high-temperature shape memory alloys Original Research Article

441

Microstructures and shape memory characteristics of rapidly solidified Ti50Ni30Cu20 alloy ribbons

442

Microstructures and stability of retained austenite in TRIP steels

443

Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites

444

Microstructures and tensile behavior of carbon nanotubes reinforced Cu matrix composites with molecular-level dispersion

445

Microstructures and tensile deformation behavior of Cu–16 wt.%Ag binary alloy

446

Microstructures and tensile mechanical properties of Ti–6Al–4V bar/disk fabricated by powder compact extrusion/forging

447

Microstructures and tensile properties of Al/2024–Al4Sr composite after hot extrusion and T6 heat treatment

448

Microstructures and tensile properties of AZ31 magnesium alloy by continuous extrusion forming process

449

Microstructures and tensile properties of hot extruded Mg–5Li–3Al–2Zn–xRE(Rare Earths) alloys

450

Microstructures and tensile properties of hot isostatic pressed Ti4522XD powders

451

Microstructures and tensile properties of hot-extruded Al matrix composites containing different amounts of Mg2Si

452

Microstructures and tensile properties of massively transformed and aged Ti46Al8Nb and Ti46Al8Ta alloys

453

Microstructures and tensile properties of Mg–8Gd–0.6Zr–xNd–yY (x + y = 3, mass%) alloys

454

Microstructures and tensile properties of Mg–Gd–Y–Zr alloy during multidirectional forging at 773 K

455

Microstructures and tensile properties of Ti–45.5Al–2Nb–2Cr rolled sheets

456

Microstructures and tensile properties of Ti–45.5Al–2Nb–2Cr rolled sheets

457

Microstructures and thermal aging mechanism of expanded vermiculite modified bitumen

458

Microstructures and thermal insulation capability of plasma-sprayed nanostructured ceria stabilized zirconia coatings

459

Microstructures and thermal properties of A356/SiCp composites fabricated by liquid pressing method

460

Microstructures and thermochromic characteristics of low-cost vanadium–tungsten co-sputtered thin films

461

Microstructures and thermochromic properties of tungsten doped vanadium oxide film prepared by using VOX–W–VOX sandwich structure

462

Microstructures and thermoelectric properties of p-type pseudo-binary Bi–Sb–Te alloys with partial substitution of Ga for Sb prepared by spark plasma sintering

463

Microstructures and toughening mechanisms of organoclay/polyethersulphone/epoxy hybrid nanocomposites

464

Microstructures and tribological properties of CrN/ZrN nanoscale multilayer coatings

465

Microstructures and tribological properties of PEEK-based nanocomposite coatings incorporating inorganic fullerene-like nanoparticles

466

Microstructures and tribological properties of plasma sprayed WC–Co–Cu–BaF2/CaF2 self-lubricating wear resistant coatings

467

Microstructures and tribological properties of vacuum plasma sprayed B4C–Ni composite coatings

468

Microstructures and tribological properties on the composite MoS2 films prepared by a novel two-step method

469

Microstructures and upconversion luminescence of Er3+ doped and Er3+/Yb3+ co-doped oxyfluoride glass ceramics

470

Microstructures and wear properties of Al–Mg–Si alloy with the addition of ball-milled CoNi powders

471

Microstructures and wear properties of brass synchroniser rings

472

Microstructures and wear properties of TiN-based cermet coating deposited on 1Cr18Ni9Ti stainless steel by electrospark process

473

Microstructures and wear properties of various clad layers of the Fe–W–C–B–Cr system

474

Microstructures and wear property of friction stir welded AZ91 Mg/SiC particle reinforced composite

475

Microstructures and wear resistance of large WC particles reinforced surface metal matrix composites produced by plasma melt injection

476

Microstructures and wear resistances of hybrid Al–(Al3Ti+Al3Ni) FGMs fabricated by a centrifugal method

477

Microstructures as a refinement of Cauchy theory. Problems of physical concreteness

478

Microstructures by design: linear problems in elastic–plastic design

479

Microstructures developed by compressive deformation of coarse grained and ultrafine grained 5083 Al alloys at 77 K and 298 K

480

Microstructures developed by super-rapid induction heating-and-quenching (SRIHQ) of Fe–1.4%Cr–1%C pearlitic steel

481

Microstructures developed in solid-liquid reactions: using Cu-Sn reaction, Ni-Bi reaction, and Cu-In reaction as examples

482

Microstructures developed in solid-liquid reactions: using Cu-Sn reaction, Ni-Bi reaction, and Cu-In reaction as examples

483

Microstructuresʹ effects on high temperature fatigue failure behavior of typical superalloys

484

Microstructures Evolution of a Ni-Base Superalloy After Long-Term Aging at 750 °C Original Research Article

485

Microstructures formed in aqueous solutions of a hydrophobically modified nonionic cellulose derivative and sodium dodecyl sulfate: a fluorescence probe investigation

486

Microstructures in a resistance spot welded high strength dual phase steel

487

Microstructures in Advanced Materials Characterized by HREM and Nanoscale Analysis

488

Microstructures in aqueous solutions of hybrid fluorocarbon/hydrocarbon catanionic surfactants

489

Microstructures in co-sputtered Al–C thin films developing at elevated temperatures

490

Microstructures in friction-stir welded dissimilar magnesium alloys and magnesium alloys to 6061-T6 aluminum alloy

491

Microstructures in front of crack tips for various propagation rates and re-evolution of the dislocation under changing propagation crack rates in pure polycrystalline copper with a large grain size

492

Microstructures in rapidly solidified AISI 304 interpreted according to phase selection theory

493

Microstructures in shells of the freshwater gastropod Viviparus viviparus: A potential sensor for temperature change?

494

Microstructures in the 6060 aluminium alloy after various severe plastic deformation treatments

495

Microstructures in Ti–Al intermetallic compounds irradiated at 673 K in HFIR

496

Microstructures observation and hot compressing tests of TiAl based alloy containing high Nb

497

Microstructures observation and hot compressing tests of TiAl based alloy containing high Nb

498

Microstructures of (Ti,Cr,Al,Si)N films synthesized by cathodic arc method

499

Microstructures of a burn resistant highly stabilized β-titanium alloy

500

Microstructures of a burn resistant highly stabilized β-titanium alloy

501

Microstructures of a carbon-fiber-reinforced silicon-carbide composite produced by precursor pyrolysis and hot pressing

502

Microstructures of a highly short-chain branched polyethylene

503

Microstructures of ancient and modern cast silver–copper alloys

504

Microstructures of and crack extension in laminated Si–Ti–C–O fabrics/mullite matrix composites

505

Microstructures of Austenitic Stainless Steel Produced by Twin-Roll Strip Caster Original Research Article

506

Microstructures of BaTiO3 based PTC thermistors with Ca, Sr and Pb additions

507

Microstructures of beta-silicon carbide after irradiation creep deformation at elevated temperatures

508

Microstructures of binderless tungsten carbides sintered by spark plasma sintering process

509

Microstructures of BPDA-PPD polyimide thin films with different thicknesses

510

Microstructures of brazed and solid-state diffusion bonded joints of tungsten with oxide dispersion strengthened steel

511

Microstructures of cemented carbides

512

Microstructures of ceramic composites with glass–ceramic matrices reinforced by SiC-based fibres

513

Microstructures of Co–Re–Cr, Mo–Si and Mo–Si–B high-temperature alloys

514

Microstructures of creep-fatigued 9–12% Cr ferritic heat-resisting steels

515

Microstructures of crystallized Ti51.5Ni48.5−xCux (x = 23.4–37.3) thin films

516

Microstructures of gallium nitride nanowires synthesized by oxide-assisted method

517

Microstructures of high-growth-rate (up to 8.3 nm/s) microcrystalline silicon photovoltaic layers and their influence on the photovoltaic performance of thin-film solar cells

518

Microstructures of industrial sinters from Quadrilatero Ferrifero’s iron ores, Minas Gerais State, Brazil

519

Microstructures of intergrown phyllosilicate grains from Verrucano metasediments (northern Apennines, Italy)

520

Microstructures of lamella-forming diblock copolymer melts under nanorod-array confinements

521

Microstructures of laser-deposited Ti–6Al–4V

522

Microstructures of laser-treated Al2O3-ZrO2-CeO2 composites

523

Microstructures of laser-treated Al2O3-ZrO2-CeO2 composites

524

Microstructures of Mg–Zn–Nd alloy including small quasicrystalline grains

525

Microstructures of modified RR2072 single crystal superalloys and their effects on LCF response at 950 8°C

526

Microstructures of nanostructured ceramic coatings obtained by suspension thermal spraying

527

Microstructures of Nb–Ti alloy films prepared by ion beam assisted deposition

528

Microstructures of Ni–AlN composite coatings prepared by pulse electrodeposition technology

529

Microstructures of olivine-plagioclase corona in meta-ultramafic rocks from Sefuri Mountains, NW Kyushu, Japan

530

Microstructures of PAN-ACF modified by catalytic benzene deposition Original Research Article

531

Microstructures of partially stabilized zirconia manufactured via hybrid plasma spray process

532

Microstructures of pulsed laser deposited Eu doped Y2O3 luminescent films on Si(0 0 1) substrates

533

Microstructures of rapidly solidified powder and extruded rod of Ni3Ge

534

Microstructures of refractory castables prepared with sol–gel additives

535

Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting Original Research Article

536

Microstructures of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing

537

Microstructures of Si multicrystals and their impact on minority carrier diffusion length Original Research Article

538

Microstructures of SiO2 and TiOX films deposited by atmospheric pressure inductively coupled micro-plasma jet

539

Microstructures of Some Bi–W–Nb–O Phases

540

Microstructures of some intermetallic compounds deformed by impact loading

541

Microstructures of some intermetallic compounds deformed by impact loading

542

Microstructures of structure I and II gas hydrates from the Gulf of Mexico

543

Microstructures of thin and thick slurry aluminide coatings on Inconel 690

544

Microstructures of two-stage aluminized coatings on Inconel 600

545

Microstructures of two-stage aluminized coatings on Inconel 600

546

Microstructures of two-stage aluminized coatings on pure Ni

547

Microstructures of two-stage aluminized coatings on pure Ni

548

Microstructures of Unidirectionally Solidified Al-Rich Cu-Si Alloys

549

Microstructures of X7R type base-metal-electroded BaTiO3 capacitor materials prepared by duplex-structured process

550

Microstructures of YBa/sub 2/Cu/sub 3/O/sub 7-x/ films prepared by low-pressure oxygen atmosphere postannealing of precursor films using Y, BaF/sub 2/ and Cu

551

Microstructures of ZrO2-8wt.%Y2O3 coatings prepared by a plasma laser hybrid spraying technique

552

Microstructures of β-lactoglobulin/amylopectin gels on different length scales and their significance for rheological properties

553

Microstructures on Ge detectors with amorphous Ge contacts

554

Microstructures with martensitic features induced by absorption of a large amount of hydrogen in a B2 single-phase Ti-22Al-27Nb alloy Original Research Article

555

Microstructures, aging behaviour and mechanical properties in hydrogen and chloride media of backward extruded Mg–Y based biomaterials

556

Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs

557

Microstructures, crystallographic fabric development and deformation mechanisms in natural hematite aggregates deformed under varied metamorphic conditions

558

Microstructures, crystallography of interfaces, and creep behavior of melt-growth composites

559

Microstructures, densification and mechanical properties of TiC–Al2O3–Al composite by field-activated combustion synthesis

560

Microstructures, hardness and bioactivity of hydroxyapatite coatings deposited by direct laser melting process

561

Microstructures, magnetic and electric properties of diluted magnetic semiconductors InTe1−x Fex (Cox)

562

Microstructures, mechanical and corrosion properties and biocompatibility of as extruded Mg–Mn–Zn–Nd alloys for biomedical applications

563

Microstructures, mechanical properties, and tribological behaviors of Cr–Al–N, Cr–Si–N, and Cr–Al–Si–N coatings by a hybrid coating system

564

Microstructures, optical and electrical properties of In-doped ZnO thin films prepared by sol–gel method

565

Microstructures, phases, and properties of low melting BaO–B2O3–ZnO glass films prepared by pulsed laser deposition

566

Microstructures, properties and high-temperature carburization resistances of HVOF thermal sprayed NiAl intermetallic-based alloy coatings

567

Microstructures, strengthening mechanisms and fracture behavior of Cu–Ag alloys processed by high-pressure torsion Original Research Article

568

Microstructures, surface bonding states and room temperature ferromagnetisms of Zn0.95Co0.05O thin films doped with copper

569

Microstructures, tensile properties and corrosion behavior of die-cast Mg–4Al-based alloys containing La and/or Ce

570

Microstructures, textures and deformation mechanisms in hematite

571

Microstructure-sensitive accumulation of plastic strain due to ratcheting in bearing steels subject to Rolling Contact Fatigue

572

Microstructure-sensitive computational modeling of fatigue crack formation

573

Microstructure-sensitive creep models for nickel-base superalloy single crystals

574

Microstructure-sensitive extreme value probabilities for high cycle fatigue of Ni-base superalloy IN100

575

Microstructure-sensitive extreme-value probabilities of high-cycle fatigue for surface vs. subsurface crack formation in duplex Ti–6Al–4V Original Research Article

576

Microstructure-sensitive HCF and VHCF simulations

577

Microstructure-sensitive modeling of high cycle fatigue

578

Microstructure-sensitive modeling of polycrystalline IN 100

579

Microstructure-sensitive modeling of rolling contact fatigue

580

Microstructure-sensitive modeling: Application to fretting contacts

581

Microstructure-sensitive notch root analysis for dwell fatigue in Ni-base superalloys

582

Microstructure-sensitive prediction and experimental validation of fretting fatigue

583

Microstructure-sensitive probabilistic modeling of HCF crack initiation and early crack growth in Ni-base superalloy IN100 notched components

584

Microstructure-sensitive weighted probability approach for modeling surface to bulk transition of high cycle fatigue failures dominated by primary inclusions

585

Microstructure–stress relationships in liquid-phase sintered alumina modified by the addition of 5 wt.% of calcia–silica additives Original Research Article

586

Microstructure–texture–mechanical properties relationship in multi-pass warm rolled Ti–6Al–4V Alloy

587

Microstructure–thermal properties of Cu/Al2O3 bilayer prepared by direct bonding

588

Microstructure–toughness–wear relationship of tetragonal zirconia ceramics

589

Microstructure–wear behavior correlation on a directionally solidified Al–In monotectic alloy

590

Microstructuring and doping of silicon with nanosecond laser pulses

591

Microstructuring of carbide metals applying Jet Electrochemical Machining

592

Microstructuring of fused silica by laser-induced backside wet etching using picosecond laser pulses

593

Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining

594

Microstructuring of polymers using a light-controlled molecular migration processes

595

Microstructuring of solid-supported lipid layers using SAM pattern generation by scanning electrochemical microscopy and the chemical lens

596

Microstructuring of stainless steel implants by electrochemical etching

597

Micro-structuring of TiO2 thin films by laser-assisted diffraction processing

598

Microstructuring of UV-transparent functionalised films on glass by excimer laser irradiation

599

Microstucture evolution and interfacial properties in the Fe–Pb system Original Research Article

600

Microstudy on creep of concrete at early age under biaxial compression

601

Micro-surface and bulk thermal behavior of a single-grain decagonal Al–Ni–Co quasicrystal

602

MICROSURFACING – AN ECO-EFFICIENT TOOL FOR ROAD SAFETY AND PAVEMENT MAINTENANCE

603

Microsurgeon Hirudo medicinalis as a natural bioshuttle for spontaneous mass vaccination against influenza a virus

604

Microsurgery for root coverage: A systematic review

605

Microsurgery without a microscope

606

Microsurgical Advancements in Breast Reconstruction

607

Microsurgical coronary artery end-to-side anastomosis on the beating heart without interruption of coronary flow: Feasibility study in the pig

608

Microsurgical Excision of Intramedullary Spinal Cord Tumors: Surgical Strategy and Clinical Outcome

609

Microsurgical neck dissection for metastasizing medullary thyroid carcinoma

610

Microsurgical reconstruction of the cancer patient : M. A. Schusterman, Lippincott-Raven, 1997 325 pp, ISBN 0397 51391 7

611

Microsurgical Training Curriculum for Neurosurgery Residents in Southern Iran

612

Micro-swimmers with hydrodynamic interactions

613

Micro-synchrotron X-ray fluorescence of cadmiumchallenged corn roots

614

Micro-synchrotron X-ray fluorescence of cadmium-challenged corn roots

615

Microsystem design [Book Review]

616

Microsystem technologies for an epiretinal implant

617

Microsystem technology as a road from macro to nanoworld

618

Microsystem technology for high-flux hydrogen separation membranes

619

Microsystems and Smart Sensor Interfaces: A Review

620

Microsystems enabled photovoltaics: 14.9% efficient 14 μm thick crystalline silicon solar cell

621

Microsystems for drug and gene delivery

622

Microsystems for optical gas sensing incorporating the solvatochromic dye Nile Red

623

Microsystems technologies for drug delivery to the inner ear

624

Microtaxonomy of fragmenting Enchytraeus species using molecular markers, with a comment on species complexes in enchytraeids

625

Microteaching, an efficient technique for learning effective teaching

626

Microtearing modes and fast edge fluctuations in Alcator C-Mod plasmas

627

Microtechniques for the determination of nanomolar concentrations of trace elements in ≤ 10 ml of sediment porewater

628

Microtechnology, Nanotechnology, and the Scanning-Probe Microscope: An Innovative Course

629

Microtectonic and geochemical characterization of thrusting in a foreland basin: Example of the South-Pyrenean orogenic wedge (Spain)

630

Microtectonics of low-P low-T carbonate fault rocks

631

Microtectonics: Passchier, C.W. and Trouw, R.A.J. 1996. Springer-Verlag, Heidelberg. ISBN 3-540-58713-6. Price: DM 64, ca £25.00, S.Fr. 61.5

632

Micro-temperature manipulation in cryogenic machining of low carbon steel

633

Micro-temperature sensor array with thin-film thermocouples

634

Micro-tensile bond strength and interfacial characterization of an adhesive bonded to dentin prepared by contemporary caries-excavation techniques

635

Microtensile bond strength between adhesive cements and root canal dentin

636

Microtensile Bond Strength between Zirconia Core and Veneering Porcelain after Different Surface Treatments

637

Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre posts

638

Microtensile bond strength of a filled vs unfilled adhesive to dentin using self-etch and total-etch technique

639

Microtensile bond strength of a resin cement to a novel fluorcanasite glass-ceramic following different surface treatments

640

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

641

Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: The effect of surface conditioning

642

Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling

643

Microtensile Bond Strength of Different Bonding Agents to Superficial and Deep Dentin in Etch-and-Rinse and Self-Etch Mode

644

Microtensile bond strength of different components of core veneered all-ceramic restorations

645

Microtensile bond strength of different components of core veneered all-ceramic restorations: Part II: Zirconia veneering ceramics

646

Microtensile bond strength of etch and rinse versus self-etch adhesive systems

647

Microtensile bond strength of resin-based composites to Ti–6Al–4V

648

Microtensile bond strength of self‑etching adhesives to enamel

649

Microtensile bond strength of silorane or methacrylate resin-based composites associated to self-etching or conventional adhesives to dentin after different storage times

650

Microtensile Bond Strength of Single Bond and Adper Prompt-L-Pop Adhesives to Dentin

651

Micro-tensile bond strength of three luting resins to human regional dentin

652

Microtensile Bond Strength of Three Restorative Core Materials with IPS E.max Press Ceramic by Two Resin Cements

653

Microtensile bond strength of total-etch and self-etching adhesives to caries-affected dentine

654

Microtensile Bond Strength of Translucent Glass Fiber Posts to Intra-radicular Dentin

655

Microtensile bond strength testing and failure analysis of two dentin adhesives

656

Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks

657

Microtensile bond strength testing of resin cements

658

Micro-tensile bond strength to bovine sclerotic dentine: Influence of surface treatment

659

Microtensile bond strength to ground enamel by glass-ionomers, resin-modified glass-ionomers, and resin composites used as pit and fissure sealants

660

Micro-tensile bond strength to surface and subsurface enamel

661

Microtensile bond strengths of glass ionomer (polyalkenoate) cements to dentine using four conditioners

662

Microtensile bond strengths of seven dentin adhesive systems

663

Micro-tensile bond strengths to sclerotic dentin using a self-etching and a total-etching technique

664

Micro-tensile bond testing of resin cements to dentin and an indirect resin composite

665

Microtensile measurements of single trabeculae stiffness in human femur

666

MICROTENSILE PROPERTIES OF WELD METAL

667

Micro-tensile strength of a welded turbine disc superalloy

668

Micro-tensile strength of sound primary second molar dentin

669

Microtensile testing of a free-standing Pt-aluminide bond coat

670

Microtensile testing of dentin adhesives

671

Microtensile versus microshear bond strength between dental adhesives and the dentin substrate

672

Micro-tension behaviour of lath martensite structures of carbon steel

673

Microtension behaviour of lenticular martensite structure of Fe–30 mass% Ni alloy

674

Microtextural and microchemical studies of hydraulic ancient mortars: Two analytical approaches to understand pre-industrial technology processes

675

Microtextural effects on mechanical properties of duplex microstructures in (α+β) titanium alloys

676

Microtextural effects on mechanical properties of duplex microstructures in (α+β) titanium alloys

677

Microtextural zones in a copper shaped charge particle

678

Microtextural zones in a copper shaped charge particle

679

Microtexture analysis of a hot deformed Al-2.3wt.%Li-0.1wt.%Zr alloy

680

Microtexture analysis of a hot deformed Al-2.3wt.%Li-0.1wt.%Zr alloy

681

Microtexture analysis of interstitial-free steel

682

Microtexture and anisotropy in wire drawn copper

683

Microtexture and anisotropy in wire drawn copper

684

Microtexture and crystallinity of highly crystallized graphite films prepared from aromatic polymide films II — Effect of extention of heat treatment time at high temperature

685

Microtexture and electrical properties of PAN-ACF

686

Microtexture and macrotexture formation in the containerless solidification of undercooled Ni-18.7 at.% Sn eutectic melts

687

Microtexture and macrotexture formation in the containerless solidification of undercooled Ni–18.7 at.% Sn eutectic melts Original Research Article

688

Microtexture and microchemistry of glaze and pigments in Italian Renaissance pottery from Gubbio and Deruta

689

Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP

690

Microtexture and structure of boron nitride fibres by transmission electron microscopy, X-ray diffraction, photoelectron spectroscopy and Raman scattering

691

Microtexture and structure of boron nitride fibres by transmission electron microscopy, X-ray diffraction, photoelectron spectroscopy and Raman scattering

692

Microtexture and structure of boron nitride fibres by transmission electron microscopy, X-ray diffraction, photoelectron spectroscopy and Raman scattering

693

Microtexture based analysis of surface asperity flattening behavior of annealed aluminum alloy in uniaxial planar compression

694

Microtexture characterization of PZT ceramics and thin films by electron microscopy

695

Microtexture development during equibiaxial tensile deformation in monolithic and dual phase steels Original Research Article

696

Microtexture Evolution and Grain Boundary Character Distribution of Interstitial-Free Steels With Moderate Levels of Cold Rolling Reductions Original Research Article

697

Microtexture evolution via deformation twinning and slip during compression of magnesium alloy AZ31

698

Microtexture formation of Ni99B1 alloys solidified on an ESL and an EML—a study based on the EBSP technique

699

Microtexture of carbons prepared from polyimide particles with crystalline and amorphous structure

700

Microtexture of chloride treated CdTe thin films deposited by CSS technique

701

Micro-texture of extruded Zr–2.5Nb tubes

702

Microtexture tracking in hot-deformed polycrystalline aluminium: Comparison with simulations Original Research Article

703

Microtexture tracking in hot-deformed polycrystalline aluminium: Experimental results Original Research Article

704

Microtexture tracking of sub-boundary evolution during hot deformation of aluminium

705

Microtexture, grain boundary character distribution and secondary working embrittlement of high strength IF steels

706

Microtexture, grain boundary character distribution and secondary working embrittlement of high strength IF steels

707

Microtexture, micro structure and plastic anisotropy of AA2195

708

Microtexture, micro structure and plastic anisotropy of AA2195

709

Microtextured substrata affect cell shape and attachment

710

Microtextured substrata alter gene expression, protein localization and the shape of cardiac myocytes

711

Microtextured superhydrophobic surfaces: A thermodynamic analysis

712

Microtextures and crystal chemistry in P 21/ c pigeonites

713

Microtextures on quartz grains in tills from Antarctica

714

Microtextures recording melting-history of a medieval glass cake

715

Microtexturing of Cold-Forging Tools - Influence on Tool Life

716

Micro-thermal analysis and evolved gas analysis

717

Micro-thermal analysis as a technique for in situ characterisation of the softening behaviour of the isotropic phase and mesophase in thermally treated pitches

718

Micro-thermal analysis for advanced silicon nitrides

719

Micro-thermal analysis of NiTi shape memory alloy thin films

720

Micro-thermal analysis of polyester coatings

721

Microthermal analysis of polymeric materials

722

Microthermal analysis of rubber-polyaniline core-shell microparticles using frequency-dependent thermal responses

723

Micro-thermal field-flow fractionation of bacteria

724

Micro-thermal focusing field-flow fractionation

725

Microthermal machining using scanning thermal microscopy

726

Micro-thermoelectric cooler: interfacial effects on thermal and electrical transport

727

Microthermoforming as a novel technique for manufacturing scaffolds in tissue engineering (CellChips (registration))

728

Microthermoforming of flexible, not-buried hollow microstructures for chip-based life sciences applications

729

Microthermogravimetry in studying the defect and transport phenomena in transition metal sulfides

730

Micro-thermomechanical constitutive model of transformation induced plasticity and its application on armour steel

731

Microthermometry and chemical composition of fluid inclusions from the Mt Chalmers volcanic-hosted massive sulfide deposits, central Queensland, Australia: implications for ore genesis

732

Microthermophotovoltaic power generator with high power density

733

Microtia Ear Reconstruction Using Tissue Expander and Autologous Costal Cartilage: Our Experience and Comparing Two Age Groups

734

Microtia: A Clinical and Genetic Study at the National Institute of Pediatrics in Mexico City

735

Micro-tidal coastal reed beds: Hydro-morphological insights and observations on wave transformation from the southern Baltic Sea

736

Micro-TiO2 as a starting material for new photocatalytic tiles

737

Microtiter Cell-Based Assay for Detection of Agents that Alter Cellular Levels of Her2 and EGFR Original Research Article

738

Microtiter Method to Test the Sensitivity of Botrytis cinerea to Boscalid

739

Microtiter plate assay for phosphate using a europium–tetracycline complex as a sensitive luminescent probe Original Research Article

740

Microtiter plate monoclonal antibody epitope analysis of Ca2+- and Mg2+-induced conformational changes in troponin C

741

Microtiter plate-based assay for screening antimicrobial activity of melanoidins against E. coli and S. aureus

742

Microtiter plates versus stirred mini-bioreactors in biocatalysis: A scalable approach

743

Microtiterplate phosphate assay based on luminescence quenching of a terbium complex amenable to decay time detection Original Research Article

744

Microtitration of Rubella Virus in Monovalent Vaccinal Products

745

Micro-to-macro transitions for continua with surface structure at the microscale

746

Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch

747

Microtome sectioning causes artifacts in rhizobox experiments

748

MICROTOMES AND MICROTOME KNIVES – A REVIEW AND PROPOSED CLASSIFICATION

749

Microtomographic characterization of columnar Al–Cu dendrites for fluid flow and flow stress determination

750

Microtomographic images of ratʹs lumbar vertebra microstructure using 30 keV synchrotron X-rays: an analysis in terms of 3D visualization

751

Microtomographic images of ratʹs lumbar vertebra microstructure using 30 keV synchrotron X-rays: an analysis in terms of 3D visualization

752

Microtomographic investigation of a yeast grain porous structure Original Research Article

753

Microtomographic investigation of damage in E911 steel after long term creep

754

Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy

755

Microtomographic study of the evolution of microstructure during creep of an AlSi12CuMgNi alloy reinforced with Al2O3 short fibres

756

Microtomography assessment of failure in acrylic bone cement

757

Microtomography based identification of gold adsorption mechanisms, the measurement of activated carbon activity, and the effect of frothers on gold adsorption

758

Microtomography using a tube source of X-rays, a low-energy-resolution HPGe detector system and an array of detectors

759

microtonal storm and stress: georgy rimsky-korsakov and quarter-tone music in 1920s soviet russia

760

Microtools for single-cell analysis in biopharmaceutical development and manufacturing

761

Microtopographic analysis of plant distribution in polar desert

762

Microtopographic analysis of turned surfaces by model-based scatterometry

763

Microtopographic evolution of mineral surfaces as a tool to identify and date young fault scarps in bedrock

764

Micro-topographic patterns unravel controls of soil water and temperature on soil respiration in three Siberian tundra systems

765

Micro-topographic patterns unravel controls of soil water and temperature on soil respiration in three Siberian tundra systems

766

Microtopographic properties of sparse moss vegetation in the Antarctic polar desert

767

Microtopographical effects of natural scaffolding on cardiomyocyte function and arrhythmogenesis

768

Microtopographically patterned surfaces promote the alignment of tenocytes and extracellular collagen

769

Microtopography for ductile fracture process characterization Part 2: application for CTOA analysis

770

Microtopography for ductile fracture process characterization: Part 1: Theory and methodology

771

Microtopography inhibits fibroblast cell proliferation in rat neonatal cardiac cultures

772

Microtox® testing of pentachlorophenol in soil extracts and quantification by capillary electrochromatography (CEC) – A rapid screening approach for contaminated land

773

Microtox® toxicity test: Detoxification of TNT and RDX contaminated solutions by poplar tissue cultures Original Research Article

774

Microtox™ characterization of foundry sand residuals

775

Micro-transponder systems for medical applications

776

Microtrap modulated flame ionization detector for on-line monitoring of methane

777

Microtrapping characteristics of single and multi-walled carbon nanotubes

778

Microtremor Analyses at Teide Volcano (Canary Islands, Spain): Assessment of Natural Frequencies of Vibration Using Time-dependent Horizontal-to-vertical Spectral Ratios

779

Microtremor analysis to evaluate BMKG region III building, Bali, Indonesia

780

Microtremor HVSR study for assessing site effects in the Bovec basin (NW Slovenia) related to 1998 Mw5.6 and 2004 Mw5.2 earthquakes

781

Microtremor Measurements for the Microzonation of Dinar

782

Microtremor measurements in Yanbu city of Western Saudi Arabia: A tool for seismic microzonation

783

Microtremor measurements in Yanbu city of Western Saudi Arabia: A tool for seismic microzonation

784

Microtremor observations of deep sediment resonance in metropolitan Memphis, Tennessee

785

Microtremor recordings in Northern Mississippi

786

Microtremor survey in Talchir, India to ascertain its basin characteristics in terms of predominant frequency by Nakamuraʹs ratio technique

787

Microtremors as a Geophysical Exploration Tool: Applications and Limitations

788

Microtremorsʹ HVSR and its correlation with surface geology and damage observed after the 2010 Maule earthquake (Mw 8.8) at Talca and Curicَ, Central Chile

789

Microtrench of oxynitride thin films in a C2F6 inductively coupled plasma

790

Micro-trephination Glaucoma Surgery In Nigerians: 10 Years Outcome

791

Microtribological analysis of gold and copper contacts

792

Microtribological and corrosion behaviors of 1H,1H,2H,2H-perfluorodecanethiol self-assembled films on copper surfaces

793

Microtribological and electrochemical corrosion behaviors of polydopamine coating on APTS-SAM modified Si substrate

794

Microtribological behaviour of human tooth enamel and artificial hydroxyapatite

795

Microtribological characterization of group V and VI metal-carbide wear-resistant coatings effective in the metal casting industry

796

Microtribological performance of Au–MoS2 nanocomposite and Au/MoS2 bilayer coatings

797

Micro-tribological performance of MoS2 lubricants with varying Au content

798

Microtribological properties of B–C–N extremely thin protective films deposited on plasma pretreated magnetic layers

799

Micro-tribological properties of hydroxyapatite-based composites in dry sliding

800

Microtribological properties of molecularly thin carboxylic acid functionalized imidazolium ionic liquid film on single-crystal silicon

801

Microtribological properties of ultrathin C60 films grown by molecular beam epitaxy

802

Microtribological studies of two-phase Al2O3–TiC ceramic at low contact pressure

803

Microtribological study of perfluoropolyether with different functional groups coated on hydrogen terminated Si

804

Microtribological/mechanical testing in 0, 1 and 2 dimensions: A comparative study on different materials

805

Micro-tribology experiments on engineering coatings

806

Micro-trigeneration for energy sustainability: Technologies, tools and trends

807

Microtructure and dielectric properties of (1 − x)Pb(Yb1/2Ta1/2)O3–xPb(Fe1/2Ta1/2)O3, 0 ≤ x ≤ 0.2 solid solution ceramics

808

Micro-truss nanocrystalline Ni hybrids Original Research Article

809

MicroTUB(B3)ules and Brain Development

810

Microtube liquid single-phase heat transfer in laminar flow

811

Microtubes made of carbon nanotubes

812

Microtubes of conducting polymers

813

Microtubes Produced During Electrolysis of Pyrrole

814

MICROTUBULAR NETWORK OF THE GELATINOUS EGG ENVELOPE WITHIN THE EGG RIBBON OF EUROPEAN PERCH, PERCA FLUVIATILIS L.

815

Microtubular SOFC anode optimisation for direct use on methane

816

Micro-tubular, solid oxide fuel cell stack operated under single-chamber conditions

817

Microtubule “Plus-End-Tracking Proteins”: The End Is Just the Beginning

818

Microtubule Alterations and Mutations Induced by Desoxyepothilone B: Implications for Drug-Target Interactions Original Research Article

819

Microtubule architecture: inspiration for novel carbon nanotube-based biomimetic materials Original Research Article

820

Microtubule behavior under strong electromagnetic fields

821

Microtubule Changes in Hematologic Malignant Cells Treated with Paclitaxel and Comparison with Vincristine Cytotoxicity

822

Microtubule cortical array organization and plant cell morphogenesis

823

Microtubule cytoskeleton: a track record

824

microtubule disruption without learning impairment in the unicellular organism, paramecium: implications for information processing in microtubules

825

Microtubule distribution in somatic cell nuclear transfer bovine embryos following control of nuclear remodeling type

826

Microtubule dynamics as a target in oncology

827

Microtubule dynamics in compatible and incompatible interactions of soybean hypocotyl cells with Phytophthora sojae

828

Microtubule Dynamics in Living Root Hairs: Transient Slowing by Lipochitin Oligosaccharide Nodulation Signals

829

Microtubule dynamics: taking aim at a moving target

830

Microtubule inhibition therapy by colchicine in severe myocarditis especially caused by epstein-barr and cytomegalovirus co-infection during a two-year period: A novel therapeutic approach

831

Microtubule Interactions with Chemically Diverse Stabilizing Agents: Thermodynamics of Binding to the Paclitaxel Site Predicts Cytotoxicity Original Research Article

832

Microtubule Plus-End-Tracking Proteins Target Gap Junctions Directly from the Cell Interior to Adherens Junctions

833

MICROTUBULE POLARITY DURING VASCULAR SMOOTH MUSCLE CELL MIGRATION IS REGULATED BY MICROTUBULE DYNAMICS, GSK-3β, AND POLARIZED LOCALIZATION OF N-CADHERIN

834

Microtubule reorientation in shoots precedes bending during the gravitropic response of cut snapdragon spikes

835

Microtubule self-organisation by reaction–diffusion processes in miniature cell-sized containers and phospholipid vesicles Original Research Article

836

Microtubule self-organisation depends upon gravity Original Research Article

837

Microtubule Sensors and Sensor Array Based on Polyaniline Synthesized in the Presence of Poly(styrene sulfonate)

838

Microtubule Stabilizer Ameliorates Synaptic Function and Behavior in a Mouse Model for Schizophrenia

839

Microtubule stabilizing agent protects cardiomyocytes against both hypothermia and cold ischemia

840

Microtubule stabilizing agents: Their molecular signaling consequences and the potential for enhancement by drug combination

841

Microtubule Structure at 8 Å Resolution

842

Microtubule–actin interactions may regulate endothelial integrity and repair

843

Microtubule-dependent multilobular organization of the nucleus in sensitive and multidrug-resistant L0 leukemia cells

844

Microtubule-Induced Pins/G(alpha)i Cortical Polarity in Drosophila Neuroblasts

845

Microtubules are more stable and more highly acetylated in ethanol-treated hepatic cells

846

Microtubules are Needed for Dispersal ofα-myosin Heavy Chain mRNA in Rat Neonatal Cardiac Myocytes

847

Microtubules Are Not an Essential Component of Phytohemagglutinin-Dependent Signal Transduction in Jurkat T Lymphocytes

848

Microtubules are potential regulators of growth-plate chondrocyte differentiation and hypertrophy

849

Microtubules as mechanical force sensors

850

Microtubules may harden or soften cells, depending of the extent of cell distension

851

Microtubules mobility affects the modulation of L-type ICa by muscarinic and β-adrenergic agonists in guinea-pig cardiac myocytes

852

Microtubules steered in the right direction: Nanotechnology

853

Microtubules, Motors, and mRNA Localization Mechanisms: Watching Fluorescent Messages Move

854

Microtubule-stabilising drugs may be therapeutic in AD

855

Micro-tuning two-photon pumped lasing (lambda)max of novel dyes

856

Microtunneling decision support system (MDS) using Neural-Autoregressive Hidden Markov Model

857

MICROTUNNELING TECHNOLOGY FOR CONDUIT CONSTRUCTION

858

MICROTUNNELING TECHNOLOGY FOR CONDUIT CONSTRUCTION

859

Microtunneling: An Ownerʹs Perspective

860

Microturbines-an economic and reliability evaluation for commercial, residential, and remote load applications

861

Microturbogas cogeneration systems for distributed generation: Effects of ambient temperature on global performance and components’ behavior

862

Microtwin formation in the α phase of duplex titanium alloys affected by strain rate

863

Microtwinning and other shearing mechanisms at intermediate temperatures in Ni-based superalloys

864

Microtwinning in highly nonstoichiometric VOx thin films Original Research Article

865

Micro-ultrasound imaging assessment of carotid plaque characteristics in apolipoprotein-E knockout mice

866

Micro-USAL technique for the manufacture of high quality microstructures in brittle materials

867

Microvacular decompreion urgery in the United tate, 1996 to 2000: mortality rate, morbidity rate, and the effect of hopital and urgeon volume

868

Microvacular ubmandibular gland tranfer for evere cae of keratoconjunctiviti icca. ieg P,* Geerling G, Komehl H, Lauer I, Warnecke K, von Domaru H. Plat Recontr urg 2000;106:554–560.

869

MicroVal: a European approach to the certification of new microbiological methods

870

Microvariability in the optical polarization of 3C 279

871

Micro-variability of hydrological processes at the maize row scale: implications for soil water content measurements and evapotranspiration estimates

872

Microvariation, variation, and the features of universal grammar

873

Microvascular Abnormalities in Depression

874

Microvascular alterations in patients with acute severe heart failure and cardiogenic shock

875

Microvascular anastomosis for additional blood flow in reconstruction after intrathoracic esophageal carcinoma surgery

876

Microvascular and macrovascular complications in diabetic nephropathy patients referred to nephrology clinic

877

Microvascular and microangiopathic antiphospholipid-associated syndromes (“MAPS”): Semantic or antisemantic?

878

Microvascular Angina and the Continuing Dilemma of Chest Pain With Normal Coronary Angiograms

879

Microvascular angina due to microvascular coronary vasospasm

880

Microvascular Angina or “Vis a Tergo”

881

Microvascular angina pectoris in hypertensive patients with left ventricular hypertrophy and diagnostic value of exercise Thallium-201 scintigraphy

882

Microvascular angina, adverse outcome: a case report

883

Microvascular based self-healing polymeric foam

884

Microvascular changes in large flame burn wound in sheep

885

Microvascular circulation at cool, normal and warm temperatures in rat leg muscles examined by histochemistry using Lycopersicon esculentum lectin

886

Microvascular Decompression for Hemifacial Spasm Using Oxidized Cellulose; Clinical Outcome and Complications

887

Microvascular decompression for trigeminal neuralgia: a simple and effective transposition method using synthetic adhesive

888

Microvascular dysfunction in acute myocardial infarction: focus on the roles of platelet and inflammatory mediators in the no-reflow phenomenon

889

Microvascular dysfunction in collateral-dependent myocardium

890

Microvascular Dysfunction in the Spectrum of Coronary Instability

891

Microvascular dysfunction induced by reperfusion injury and protective effect of ischemic preconditioning

892

Microvascular endothelial cell activation is present in the umbilical placental microcirculation in fetal placental vascular disease

893

Microvascular endothelium dysfunction in rats bearing 1,2-dimethylhydrazine-induced colon tumors

894

Microvascular free tissue transfer in the management of squamous cell carcinoma of the tongue during pregnancy

895

Microvascular Function Is Selectively Impaired in Patients With Hypertrophic Cardiomyopathy and Sarcomere Myofilament Gene Mutations

896

Microvascular Function, Metabolic Syndrome, and Novel Risk Factor Status in Women With Cardiac Syndrome X

897

Microvascular histopathology in head and neck oncology

898

Microvascular injury and blood–brain barrier leakage in Alzheimerʹs disease

899

Microvascular injury in reperfused infarcted myocardium: noninvasive assessment with contrast-enhanced echoplanar magnetic resonance imaging

900

Microvascular integrity after reperfusion therapy, ,

901

Microvascular invasion during endochondral ossification in experimental fractures in rats

902

Microvascular Invasion in HCC: The Molecular Imaging Perspective

903

Microvascular maturity elicited in tissue treated with cytokine-loaded hyaluronan-based hydrogels

904

Microvascular myocutaneous flaps in the lumbosacral area using the iliac artery and vein as recipient vessels

905

Microvascular Obstruction: The Final Frontier for a Complete Myocardial Reperfusion

906

Microvascular Obstruction: Underlying Pathophysiology and Clinical Diagnosis

907

Microvascular pathology in the aging human brain: Evidence that senile plaques are sites of microhaemorrhages

908

Microvascular patterns in human medullary tegmentum at the level of the area postrema

909

Microvascular Permeability of the Non–Heart-Beating Rabbit Lung After Warm Ischemia and Reperfusion: Role of Neutrophil Elastase

910

Microvascular permeability to macromolecules in human melanoma xenografts assessed by contrast-enhanced MRI—intertumor and intratumor heterogeneity

911

Microvascular Permeabilization and Cardiomyocyte Injury Provoked by Myocardial Contrast Echocardiography in a Canine Model Original Research Article

912

Microvascular plasticity in aging

913

Microvascular prefabricated free skin flaps for esophageal reconstruction in difficult patients

914

Microvascular radial forearm fasciocutaneous free flap in hard palate reconstruction

915

Microvascular Rarefaction in Hypertension—Reversal or Over-Correction by Treatment?

916

Microvascular reactivity after crystalloid, cold blood, and warm blood cardioplegic arrest

917

Microvascular reconstruction of a giant encephalocele defect in a 10-week-old infant

918

Microvascular responses to adenosine help explain functional and pathologic differences between intestinal segments

919

Microvascular responses to endothelin in deoxycorticosterone acetate-salt hypertensive rats

920

Microvascular stress analysis: Part I: Simulation of microvascular anastomoses using finite element analysis

921

Microvascular supply of the lateral epicondyle and common extensor origin

922

Microvascular transfer-related abrogation of capillary flow motion in critically reperfused composite flaps

923

Microvascular vastus lateralis muscle flap for chronic empyema associated with a large cavity

924

Microvascularization and proliferation cell nuclear antigen expression in the post-partum endometrium in the mare

925

Microvascularization of the human digit as studied by corrosion casting

926

Microvesicles preparation from mesenchymal stem cells

927

Microvesicular steatosis and steatohepatitis: role of mitochondrial dysfunction and lipid peroxidation

928

Microvesicular steatosis, hemosiderosis and rapid development of liver cirrhosis in a patient with Pearsonʹs syndrome

929

Microvessel and lymphatic density in tubular carcinoma of the breast: Comparative study with invasive low-grade ductal carcinoma

930

Microvessel and lymphatic density in tubular carcinoma of the breast: Comparative study with invasive low-grade ductal carcinoma

931

Microvessel Density (MVD) and Vascular Endothelial Growth Factor (VEGF) As Predictors of Gastrointestinal Stromal Tumors Behavior

932

Microvessel density and p53 mutations in advanced-stage epithelial ovarian cancer

933

Microvessel density does not predict outcome in high grade soft tissue sarcoma

934

Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor

935

Microvibration control of coupled high tech equipment-building systems in vertical direction

936

Microvibration control platform for high technology facilities subject to traffic-induced ground motion

937

Micro-vibration suppression of equipment supported on a floor incorporating magneto-rheological elastomer core

938

Microvillar Ion Channels: Cytoskeletal Modulation of Ion Fluxes

939

Microviscosity and wavelength effects on radical cage pair recombination

940

Microviscosity of an ion-conducting polymer probed by fluorescence depolarization and dielectric spectroscopy

941

Microviscosity of bilayer membranes of some N-acylamino acid surfactants determined by fluorescence probe method

942

Microvisualization of corrosion

943

Microvisualization of corrosion

944

Microvoid evolution in carbon fibers during graphitization for the preparation of carbon/carbon composites

945

Microvoid evolution in carbon fibers during graphitization for the preparation of carbon/carbon composites

946

Microvolt T-Wave Alternans and Long-Term Prognosis: The Issue of Comparison of the Initial Screening With Repeat Testing Remains Unresolved

947

Microvolt T-Wave Alternans and the Risk of Death or Sustained Ventricular Arrhythmias in Patients With Left Ventricular Dysfunction Original Research Article

948

Microvolt T-Wave Alternans for Arrhythmia Risk Stratification in Left Ventricular Dysfunction: Which Patients Benefit?

949

Microvolt T-Wave Alternans for the Risk Stratification of Ventricular Tachyarrhythmic Events: A Meta-Analysis Original Research Article

950

Microvolt T-Wave Alternans Identifies Patients With Ischemic Cardiomyopathy Who Benefit From Implantable Cardioverter-Defibrillator Therapy Original Research Article

951

Microvolt T-Wave Alternans Testing Has a Role in Arrhythmia Risk Stratification

952

Microvolt T-Wave Alternans Testing Has No Role at Present in Guiding Therapy for Patients at High Risk of Ventricular Arrhythmias

953

Microvolt T-wave alternans: A review of techniques, interpretation, utility, clinical studies, and future perspectives

954

Microvolt T-Wave Alternans: Is There Anything That Can Be Done to Save It?

955

Microvolt T-Wave Alternans: Physiological Basis, Methods of Measurement, and Clinical Utility—Consensus Guideline by International Society for Holter and Noninvasive Electrocardiology

956

Microvolt T-Wave Alternans: Where Do We Go From Here?

957

Microvoltammetric studies on single particles of battery active materials

958

Microvoltammetric study of electrochemical properties of a single spherical nickel hydroxide particle

959

Microvoltammetry for cathode materials at elevated temperatures: electrochemical stability of single particles

960

Microvoltammetry of lithium nickel oxide single particle: deterioration of the redox behavior by water molecules

961

Micro-volume flow titration and screening the dissociation constants (pKa) of weak acids

962

Micro-volume flow titration and screening the dissociation constants (pKa) of weak acids Original Research Article

963

Microvolume turbidimetry for rapid and sensitive determination of the acid labile sulfide fraction in waters after headspace single-drop microextraction with in situ generation of volatile hydrogen sulfide Original Research Article

964

Microvortex-enhanced heat transfer in 3D-integrated liquid cooling of electronic chip stacks

965

Micro-watershed enhances rain water use efficiency, phenology and productivity of wheat under rainfed condition

966

Micro-watershed level population based fuelwood consumption dynamics: Implications of seasonal vs. annual models for sustainable energy resource planning

967

Microwave Ablation for Atrial Fibrillation: Dose-Response Curves in the Cardioplegia-Arrested and Beating Heart

968

Microwave ablation of atrial fibrillation during mitral valve operations

969

Microwave ablation of canine atrial tachycardia induced by aconitine

970

Microwave Ablation Using Four-Tine Antenna: Effects of Blood Flow Velocity, Vessel Location, and Total Displacement on Porous Hepatic Cancer Tissue

971

Microwave ablation versus hepatic resection in management of hepatocellular carcinoma

972

Microwave absorbance properties of zirconium–manganese substituted cobalt nanoferrite as electromagnetic (EM) wave absorbers

973

Microwave absorbent properties of nanosized cobalt ferrite powders prepared by coprecipitation and subjected to different thermal treatments

974

Microwave absorbers of two-layer composites laminate for wide oblique incidence angles

975

Microwave absorbing behavior of metal dispersed TiO2 nanocomposites

976

Microwave absorbing ceramic coatings with multi-walled carbon nanotubes and ceramic powder by polymer pyrolysis route

977

Microwave absorbing composite lattice grids

978

Microwave absorbing properties of a thermally reduced graphene oxide/nitrile butadiene rubber composite Original Research Article

979

Microwave absorbing properties of activated carbon-fiber felt screens (vertical-arranged carbon fibers)/epoxy resin composites

980

Microwave absorbing properties of activated carbon-fiber felt screens (vertical-arranged carbon fibers)/epoxy resin composites

981

Microwave absorbing properties of activated carbon-fiber felt dipole array/epoxy resin composites

982

Microwave absorbing properties of composites filled with glass-coated Fe69Co10Si8B13 amorphous microwire

983

Microwave absorbing properties of double-layer cementitious composites containing Mn–Zn ferrite

984

Microwave absorbing properties of linear low density polyethylene/ethylene–octene copolymer composites filled with short carbon fiber

985

Microwave absorbing properties of NdFeCo magnetic powder

986

Microwave absorbing properties of polyaniline/multi-walled carbon nanotube composites with various polyaniline contents

987

Microwave absorbing properties of the Archimedean plane spiral antenna array/epoxy resin composites

988

Microwave absorbing property and complex permittivity and permeability of epoxy composites containing Ni-coated and Ag filled carbon nanotubes

989

Microwave absorbing property of Fe-filled carbon nanotubes synthesized by a practical route

990

Microwave absorption and radiation from large-area multilayer CVD graphene

991

Microwave absorption behaviors of polyaniline nanocomposites containing TiO2 nanoparticles

992

Microwave absorption behaviors of tetra-needle-like ZnO whiskers

993

Microwave absorption behaviors of tetra-needle-like ZnO whiskers

994

Microwave absorption by nanostructural ferric oxide encapsulated within MCM-41

995

Microwave absorption by polyaniline–carbon nanotube composites

996

Microwave absorption characteristics of manganese dioxide with different crystalline phase and nanostructures

997

Microwave absorption enhancement of CIP/PANI composites

998

Microwave absorption in carbon-doped YNi4B superconductors Original Research Article

999

Microwave absorption materials — IV Preparation of the mixed layer structure phases, RexTa1−xS2 and OsxTa1−xS2, and some electrical and magnetic properties

1000

Microwave absorption measurements in the complex perovskite Pb(Fe0.5Ta0.5)O3: Detection of short-range orderly regions

بازگشت