ليست عنوان مقالات لاتين Study on the Accuracy of RANS Modelling of the Turbulent Flow Developed in a Kaplan Turbine Operated at BEP. Part 1 - Velocity Field Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu–Ti–C system

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Study on the Accuracy of RANS Modelling of the Turbulent Flow Developed in a Kaplan Turbine Operated at BEP. Part 1 - Velocity Field

2

Study on the Accuracy of RANS Modelling of the Turbulent Flow Developed in a Kaplan Turbine Operated at BEP. Part 2 - Pressure Fluctuations

3

Study on the accuracy of the elution by characteristic point method for the determination of single component isotherms

4

Study on the acidification and pollution of precipitation based on a data set collected on a 0.5-mm precipitation basis

5

Study on the action effect of pavement straw composite fiber material in asphalt mixture

6

Study on the activation of phospholipases A2 by purinergic agonists in rat submandibular ductal cells

7

Study on the active screen plasma nitriding and its nitriding mechanism

8

Study on the activity coefficients and the solubilities of amino acids in water by the perturbation theory

9

Study on the activity of non-purine xanthine oxidase inhibitor by 3D-QSAR modeling and molecular docking

10

Study on the adhesion behavior of wheel/rail under oil, water and sanding conditions

11

Study on the adhesion mechanism of electrodeposited nickel clusters on carbon substrates

12

Study on the adsorption behavior of γ-GPS on low carbon steel surfaces using RA-IR, EIS and AFM

13

Study on the adsorption isosteres of the composite adsorbent CaCl2 and expanded graphite

14

Study on the adsorption isotherms of chromium (VI) by means of carbon nano tubes from aqueous solutionsStudy on the adsorption isotherms of chromium (VI) by means of carbon nano tubes from aqueous sol

15

Study on the adsorption of fluorescein on Ag(1 1 0) substrate

16

Study on the adsorption of lanthanum(III) from aqueous solution by bamboo charcoal

17

Study on the adsorption of poly(o-ethoxyaniline) nanostructured films using atomic force microscopy

18

Study on the Adsorption of Samarium and Gadolinium Ions by a Biopolymer Microcapsules Containing DEHPA/TOPO Extract

19

Study on the adsorption performance of composite adsorbent of CaCl2 and expanded graphite with ammonia as adsorbate

20

Study on the adsorptive stripping voltammetric determination of trace cerium at a carbon paste electrode modified in situ with cetyltrimethylammonium bromide

21

Study on the AE characteristics of fracture process of mortar, concrete and steel-fiber-reinforced concrete beams

22

Study on the Aerodynamic Performance of Novel Bypass Shock Induced Thrust Vector Nozzle

23

Study on the aerosol optical properties and their relationship with aerosol chemical compositions over three regional background stations in China

24

Study on the aerosol transmission of Hantaan virus

25

Study on the affective property of music

26

Study on the aggregation and electrochemical properties of Rose Bengal in aqueous solution of cyclodextrins

27

Study on the aggregation of coal liquefied preasphaltene in organic solvents by UV–vis and fluorescence spectrophotometry

28

Study on the aggregation of teicoplanin

29

Study on the Al2O3–SiO2–La2O3 ternary system at 1300°C

30

Study on the algal dynamic model for West Lake, Hangzhou

31

Study on the algal dynamic model for West Lake, Hangzhou

32

Study on the alkylation of benzene and 1-dodecene

33

Study on the alkylation of benzene with propylene over Hβ zeolite Original Research Article

34

Study on the alteration of chemical composition and structural parameters of modified montmorillonite

35

Study on the aluminophosphate glass-rich cement

36

Study on the aluminum alloy burnishing processing and the existence of the outstripping phenomenon

37

Study on the ammonia-catalyzed hydrolysis kinetics of single phenyltriethoxysilane and mixed phenyltriethoxysilane/tetraethoxysilane systems by liquid-state 29Si NMR

38

Study on the amorphous poly alpha olefin (APAO) modified asphalt binders

39

Study on the amorphous Ta2O5 thin film capacitors deposited by dc magnetron reactive sputtering for multichip module applications

40

Study on the amorphous Ta2O5 thin film capacitors deposited by dc magnetron reactive sputtering for multichip module applications

41

Study on the amorphous tungsten trioxide ion-sensitive field effect transistor

42

Study on the analogy feedback active soft edge noise barrier

43

Study on the Analytical Behaviour of Concrete Structure Against Local Impact of Hard Missile

44

Study on the annealing effects of proton-implanted rutile

45

Study on the anode behavior of Sn and Sn–Cu alloy thin-film electrodes

46

Study on the anodizing of AZ31 magnesium alloys in alkaline borate solutions

47

Study on the antibiotic activity of microcapsule curcumin against foodborne pathogens

48

Study on the antiendotoxin action of Pulsatillae Decoction using an Affymetrix rat genome array

49

Study on the antioxidant activity and in vitro antifungal activity of Verbascum speciosum methanolic extract

50

Study on the Antiseizure Activities of Inner Bark of Guettarda Speciosa (L.)

51

Study on the antithrombotic activity of Umbilicaria esculenta polysaccharide

52

Study on the applicability of polytetrafluoroethylene–silver composite thin films as sensor material

53

Study on the Application of Cucurbit[6]uril as a Nanoporous Adsorbent for the Removal of 2,4-Dinitrophenol from Wastewaters

54

Study on the application of DME/diesel blends in a diesel engine

55

Study on the application of reduced graphene oxide and multiwall carbon nanotubes hybrid materials for simultaneous determination of catechol, hydroquinone, p-cresol and nitrite Original Research Article

56

Study on the application of reduced graphene oxide and multiwall carbon nanotubes hybrid materials for simultaneous determination of catechol, hydroquinone, p-cresol and nitrite Original Research Article

57

Study on the Application of Sustainable Construction in the Development of the Likupang Special Economic Zone

58

Study on the application possibilities of an atmospheric pressure glow discharge with liquid electrolyte cathode for the modification of polymer materials

59

Study on the applications of SiC thin films to MEMS techniques through a fabrication process of cantilevers

60

Study on the aqueous two-phase systems composed of surfactant, ionic liquid and water

61

Study on the Architecture of Taj Mahal

62

Study on the ash fusion temperatures of coal and sewage sludge mixtures

63

Study on the assembling reaction of graphite oxide nanosheets and polycations Original Research Article

64

Study on the association between residential exposure to N, N-dimethylformamide and hospitalization for respiratory disease

65

Study on the Awareness of the Students of Azad University of Medical Sciences About Nutrition and Food Storing Stuff During Crisis

66

Study on the axial compression buckling behaviors of concentric multi-walled cylindrical shells filled with soft materials

67

STUDY ON THE BEHAVIOR OF ARTIFICIALLY INSEMINATED QUEENS OF APIS M. CARPATICA RACE DURING PASSIVE PERIOD

68

Study on the behavior of medium carbon vanadium microalloyed steel by hot compression test

69

Study on the behavior of nanofiltration membranes using for chromium(III) recovery from salt mixture solution Original Research Article

70

Study on the Behavior of Solar Array Deployment with Root Hinge Drive Assembly

71

Study on the behavior of the heavy metals Cu, Cr, Ni, Zn, Fe, Mn and 137Cs in an estuarine ecosystem using Mytilus galloprovincialis as a bioindicator species: the case of Thermaikos gulf, Greece

72

Study on the behavior of Zn–Fe alloy electroplating

73

Study on the behaviour of glucose oxidase immobilized on microfiltration polyamide membrane

74

Study on the behaviour of ZnCoCu alloy electroplating

75

Study on the binary intermetallic compounds in the Mg–Ce system

76

Study on the binary mixtures of alkyls alfa, omega-dihalogenated (chlorine, bromine, iodine) with n-alkanes. An improvement by considering the variation of the interaction parameter with the chain length

77

Study on the binding behavior of bovine serum albumin with cephalosporin analogues by chemiluminescence method

78

Study on the binding equilibrium between surfactant FC95 and DNA by resonance light-scattering technique

79

Study on the binding of 2,3-diazabicyclo[2.2.2]oct-2-ene with bovine serum albumin by fluorescence spectroscopy

80

Study on the binding of colloidal zinc oxide nanoparticles with bovine serum albumin

81

Study on the binding of farrerol to human serum albumin

82

Study on the Biochemical Effect of Date Palm Pollen on Mice Exposed to Incense Smoke

83

Study on the biodegradability and biocompatibility of WE magnesium alloys

84

Study on the biosynthesis of the notoamides: pinacol-type rearrangement of the isoprenyl unit in deoxybrevianamide E and 6-hydroxydeoxybrevianamide E

85

Study on the black electrolytic coloring of anodized aluminum in cupric sulfate

86

Study on the blood compatibility and biodegradation properties of magnesium alloys

87

Study on the bonding state for carbon–boron nitrogen with different ball milling time

88

Study on the bonding strength between calcium phosphate/chitosan composite coatings and a Mg alloy substrate

89

Study on the breaking behavior of self-bursting microcapsules

90

Study on the brill transition and melt crystallization of nylon 65: A polymer able to adopt a structure with two hydrogen-bonding directions

91

Study on the bubble motion control by ultrasonic wave

92

Study on the bubbly lubrication of journal bearings at various shear rates and temperatures

93

Study on the build of channels in accurate separation membrane and its selective mechanism

94

Study on the bulging deformation of the porous metal in upsetting

95

Study on the buoyancy and surface tension convection of high-temperature oxide solution

96

Study on the calibration coefficients of a quasi-dimensional model for HCNG engine

97

Study on the carbon dioxide hydrogenation to iso-alkanes over Fe–Zn–M/zeolite composite catalysts

98

Study on the carbonization process in the fabrication of pebble fuel elements

99

Study on the catalytic reaction mechanism of low temperature oxidation of CO over Pd–Cu–Clx/Al2O3 catalyst

100

Study on the cause of pop-out defects on the concrete wall and repair method

101

Study on the cavitation erosion behavior of hardfacing alloys for nuclear power industry

102

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

103

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

104

Study on the Ce substitution effects of BiFeO3 films prepared by a sol–gel process

105

Study on the Cestode Postgangesia inarmata from the Silurid Fish Silurus glanis from Kurdistan Region, Iraq

106

Study on the changes of Carbonic Anhydrase activity in insulin resistance and the effect of methylglyoxal

107

Study on the changes of urinary 8-hydroxydeoxyguanosine levels and burden of heavy metal around e-waste dismantling site Original Research Article

108

Study on the chaos anti-control technology in nonlinear vibration isolation system

109

Study on the characteristic points of boiling curve by using wavelet analysis and genetic neural network Original Research Article

110

Study on the characteristics and activity of Ni–Cu–Zn ferrite for decomposition of CO2

111

Study on the characteristics of electrical discharge machining using dielectric with surfactant

112

Study on the characteristics of ferroelectric electron emission

113

Study on the characteristics of metal–organic interface for organic thin-film transistors

114

Study on the characteristics of Ni–W–P composite coatings containing nano-SiO2 and nano-CeO2 particles

115

Study on the characteristics of the sodium heat pipe in passive residual heat removal system of molten salt reactor

116

Study on the characteristics of the supersonic steam injector

117

Study on the Characteristics of Traction Forces Difference Asymmetric Steering Bogies

118

Study on the chemical modification of epoxy/anhydride thermosets using a hydroxyl terminated hyperbranched polymer

119

Study on the chemical stability of the anion exchange membrane of grafting dimethylaminoethyl methacrylate

120

Study on the chemiluminescence resonance energy transfer between luminol and fluorescent dyes using a linear CCD spectrometer

121

Study on the chiral recognition of the enantiomers of ephedrine derivatives with neutral and sulfated heptakis(2,3-O-diacetyl)-β-cyclodextrins using capillary electrophoresis, UV, nuclear magnetic resonance spectroscopy and mass spectrometry

122

Study on the chiral separation of basic drugs by capillary zone electrophoresis using β-CD and derivatized β-CDs as chiral selectors

123

Study on the chromatographic behavior of water-soluble vitamins on p-tert-butyl-calix[8]arene-bonded silica gel stationary phase by HPLC

124

Study on the Classroom Methodology of Secondary School Teachers Trained Through Distance Education

125

Study on the cleaning of new ultrafiltration spiral-woundmodules to prevent membrane fouling (including biological fouling) Original Research Article

126

Study on the ClO4 doped PEDOT-PEG in organic solvent using a hole injection layer for PLEDs

127

Study on the coalescence mechanism of splitting failure of crack-weakened rock subjected to compressive loads

128

Study on the coherent spin motion of the radical-ion pair formed in the laser photolysis of N,N,N′,N′-tetramethyl-1,4-phenylenediamine in 2-propanol Original Research Article

129

Study on the cold working process for FM steel cladding tubes

130

Study on the Collaborative and Interactive Development of the Primary Industry and the Tertiary Industry: Empirical Analysis of the Example of Dujiangyan City

131

Study on the collaborative design process over the Internet: a case study on VRML 2.0 specification design

132

Study on the co-luminescence effect of Tb–Gd–epinephrine system and its application to the sensitive determination of epinephrine at nanomol level

133

Study on the co-luminescence effect of terbium–gadolinium–nucleic acids–cetylpyridine bromide system

134

Study on the combination of self-assembled electrochemical active films of hemoglobin and multilayered fibers

135

Study on the Compaction Effect Factors of Lime-treated Loess Highway Embankments

136

Study on the competition between density waves, singlet, and triplet pairing superconductivity in organic conductors (TMTSF)2X Original Research Article

137

Study on the competitive reaction between bovine serum albumin and neomycin with ponceau S as fluorescence probe

138

Study on the complexation of isoquercitrin with β-cyclodextrin and its derivatives by spectroscopy Original Research Article

139

Study on the composition and hydration of alinite and calcium chloroaluminate minerals

140

Study on the composition and phase change of BaO/Hf/Mo under high temperature Original Research Article

141

Study on the composition of mineral scales in oil wells

142

Study on the compositional differences between transgenic and non-transgenic papaya (Carica papaya L.)

143

Study on the compositional differences between transgenic and non-transgenic papaya (Carica papaya L.)

144

Study on the compositional differences of Tang Sancai from different kilns by INAA

145

Study on the compounds containing 19F and 10B atoms in a single molecule for the application to MRI and BNCT Original Research Article

146

Study on the concentration and seasonal variation of inorganic elements in 35 species of marine algae

147

Study on the concentration effects in size exclusion chromatography: VII. A quantitative verification for the model theory of concentration and molecular mass dependences of hydrodynamic volumes for polydisperse polymers

148

Study on the Configuration Space Based Algorithmic Path Planning of Industrial Robots in an Unstructured Congested Three-Dimensional Space: An Approach Using Visibility Map

149

Study on the conjugation mechanism of colistin sulfate with bovine serum albumin and effect of the metal ions on the reaction

150

Study on the Connection of the Parking lots to Smart Grid Regarding Upgrade Synchronous Generator Performance

151

Study on the construction and performance of a Hg(II)-sensing system having an “off–on” probe derived from rhodamine and an up-conversion excitation core

152

Study on the contamination of Abadan public parks soil with Toxocara spp. eggs

153

Study on the Contrast between Two Seismic Response Analysis Programs of Soil Layer

154

Study on the contribution of cryosphere to runoff in the cold alpine basin: A case study of Hulugou River Basin in the Qilian Mountains

155

Study on the control of pore sizes of membranes using chemical methods Part II. Optimization factors for preparation of membranes Original Research Article

156

Study on the control of pore sizes of membranes using chemical methods Part IV. The role of organic acids Original Research Article

157

Study on the control of pore sizes of membranes using chemical methods: Part III. The performance of carbonates and bicarbonates in the membrane-making process by the chemical reaction Original Research Article

158

Study on the control rod interaction effect in RSG gas multipurpose reactor (MPR-30)

159

Study on the controlled growth of carbon nanospheres from de-oiled asphalt

160

Study on the controlling strategies of homogeneous charge compression ignition combustion with fuel of dimethyl ether and methanol

161

Study on the convective heat transfer and pressure drop in the micro-channel heat sink

162

Study on the conversion of cyanobacteria of Taihu Lake water blooms to biofuels

163

Study on the conversion of glycerol to nitriles over a Fe19.2K0.2/γ-Al2O3 catalyst

164

Study on the conversion of three natural statins from lactone forms to their corresponding hydroxy acid forms and their determination in Pu-Erh tea

165

Study on the cooling performance of sea salt solution during reflood heat transfer in a long vertical tube

166

Study on the coordination properties of [CeFx]4−x and [BFy]3−y in sulfuric acid medium by complexometric potentiometric titration

167

Study on the correlation between crystallite size and optical gap energy of doped ZnO thin film

168

Study on the correlations between the twin kilohertz quasi-periodic oscillations in low-mass X-ray binaries Original Research Article

169

Study on the corrosion properties of nanocrystalline nickel electrodepositied by reverse pulse current

170

Study on the corrosion residual strength of the 1.0 wt.% Ce modified AZ91 magnesium alloy

171

Study on the corrosion resistance of phytic acid conversion coating for magnesium alloys

172

Study on the coupled multiple nanocrystal quantum-dot system

173

Study on the coupling of esterification with pervaporation

174

Study on the covalence effect of the transition-metal in solids and its application for the electron states of ZnS:Co2+ crystal

175

Study on the Cr deposition and poisoning phenomenon at (La0.6Sr0.4)(Co0.2Fe0.8)O3−δ electrode of solid oxide fuel cells by transmission X-ray microscopy

176

Study on the Criteria of Interlocking Block Design from Industrial, Flexible and Demountable Approaches

177

Study on the critical roles of apoptosis in asthma disease

178

Study on the crystallization behavior of amorphous carbon nitride films

179

Study on the crystallization of poly(butylene azelate-co-butylene succinate) copolymers

180

Study on the crystallization process of NiP amorphous alloy

181

Study on the curing process and shearing tests of die attachment by Ag-epoxy electrically conductive adhesive

182

Study on the curing properties of SBR/La-GDTC/SiO2 composites

183

Study on the cut size of a turbo air classifier

184

Study on the cycle decomposition of CO2 over NiCr0.08Fe1.92O4 and the microstructure of products

185

Study on the cyclization of 6-arylethynylpyrimidine-5-carbaldehydes with tert-butylamine: microwave versus thermal preparation of pyrido[4,3-d]pyrimidines

186

Study on the cyclotriphosphazene film on magnetic head surface

187

Study on the Cytotoxic Effects of Iron Oxide Nanoparticles Synthesized by Cytoplasmic Extract of Lactobacillus Fermentum

188

Study on the cytotoxicity of microcystin-LR on cultured cells

189

Study on the damaging process of silica by in-reactor luminescence

190

Study on the damping behavior of Al/SiCp composite in thermal cycling

191

Study on the Data Mining Algorithm Based on Positive and Negative Association Rules

192

Study on the deactivation of amorphous NiB/SiO2 catalyst during the selective hydrogenation of cyclopentadiene to cyclopentene Original Research Article

193

Study on the deactivation phenomena of Cu-based catalyst for methanol synthesis in slurry phase

194

Study on the defects of ZnO nanowire

195

Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation

196

Study on the Deformation Behavior of Mg-3.6% Er Magnesium Alloy

197

Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling

198

Study on the deformation of die and product in closed die upsetting

199

Study on the degeneracy of antisense peptides using affinity chromatography

200

Study on the degradability of poly(ester amide)s derived from the α-amino acids glycine, and l-alanine containing a variable amide/ester ratio

201

Study on the degradation and stabilization of organic matter in waste by means of thermal analyses

202

Study on the degradation mechanism of organic light-emitting diodes (OLEDs)

203

Study on the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chloro-phenoxyacetic sodium (MCPA sodium) in natural agriculture-soils of Fuzhou, China using capillary electrophoresis Original Research Article

204

Study on the degradation of dicofol via electrochemical oxidation process: simulation and validation

205

STUDY ON THE DEMODULATION STRUCTURE OF READER RECEIVER IN A PASSIVE RFID ENVIRONMENT

206

Study on the densification of composite coating particles of α-Al2O3–SiO2

207

Study on the design earthquake resistance and degree of earthquake damage of reinforced concrete viaducts

208

Study on the design of inlet and exhaust system of a stationary internal combustion engine

209

Study on the design of precious metal based protective films for glass moulding process

210

Study on the Design Principles of Data Disaster Recovery System for Hospitals

211

Study on the design procedure for a multi-cool/heat tube system

212

Study on the design sensitivity analysis based on complex variable in eigenvalue problem

213

Study on the designing rules and processability of porous structure based on selective laser melting (SLM)

214

Study on the destabilization mixing in the flat plate photobioreactor by means of CFD

215

Study on the deterioration process of a chromium-free conversion coating on AZ91D magnesium alloy in NaCl solution

216

Study on the deterioration process of bipolar coating using electrochemical impedance spectroscopy

217

Study on the deteriorations of bituminous binder resulted from volatile organic compounds emissions

218

Study on the development method of panel parts with free form surface

219

Study on the development of a capacitance-type flowmeter for slush hydrogen Original Research Article

220

Study on the developmental toxicity of orally administered isobutylidenediurea in rats

221

Study on the device characteristics of FePc and FePcCl organic thin film Schottky diodes: Influence of oxygen and post deposition annealing

222

Study on the diagnosis time of developmental dysplasia of the hip

223

Study on the diamond tool drilling of engineering ceramics

224

Study on the diastereoselective synthesis of dithymidine phosphorothioates through a d-xylose derived chiral auxiliary and development of a novel catalyst

225

Study on the Diffraction Patterns of a"-Fe16N2 with Jack-1 and Jack-2 Structural Parameters

226

Study on the diffusion kinetics of adsorption of heavy rare earth with Cyanex272-P507 impregnated resin

227

Study on the dimer–monomer equilibrium of a fluorescent dye and its application in nucleic acids determination

228

Study on the direct decomposition of nitrous oxide over Fe-beta zeolites: From experiment to theory

229

Study on the direct liquefaction reactivity of Shenhua coal catalyzed by SO42–/ZrO2 solid acid

230

Study on the dissimilar magnesium alloy and copper lap joint by TIG welding

231

Study on the dissolution of heat-induced ovalbumin gel in alkaline solutions relevant to the removal of fouling deposits Original Research Article

232

Study on the dissolution process of zinc anode in ammoniacal ammonium chloride system

233

Study on the distortion of steel worm shafts

234

Study on the distribution and quantity of biomass residues resource in China

235

Study on the distribution of radioactive trace elements in vitamin D-overloaded rats using the multitracer technique

236

Study on the Distribution Regularity of Accompanying Harmful Elements in the Copper-Bearing Skarn Mine at the Fengshan in the Mineral Processing System

237

Study on the divided-wall electric desalting technology for Suizhong crude oil Original Research Article

238

Study on the doping stability and electronic structure of wurtzite Zn1−xCdxO alloys by first-principle calculations Original Research Article

239

Study on the Dose Enhancement of Gold Nanoparticles When Exposed to Clinical Electron, Proton, and Alpha Particle Beams by Means of Geant4

240

Study on the double cold crystallization peaks of poly(ethylene terephthalate) 3. The influence of the addition of calcium carbonate (CaCO3)

241

Study on the double fluorinated modification of the acrylate latex

242

Study on the drawbead restraining force in the stamping processes (in Polish) Badarne oporów kolnierza wywołanych dzialaniem progów ciłgowych w procesach tłoczenia blach

243

Study on the drawbead setting of the large deformation area in a trunk lid

244

Study on the dual frequency capacitively coupled plasmas by the particle-in-cell/Monte Carlo method

245

Study on the dynamic behavior of a current in cable-in-conduit conductors by using self magnetic field measurements

246

Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method

247

Study on the dynamic behavior of Langmuir films at the air-water interface by a displacement current measuring method

248

Study on the dynamic characteristics of a new type externally pressurized spherical gas bearing with slot–orifice double restrictors

249

Study on the dynamic characteristics of a virtual-axis hybrid polishing machine tool by Tflexible multibody dynamics

250

Study on the dynamic characteristics of the low-stress vibration cropping machine

251

Study on the dynamic recrystallization behavior of Ti-alloy Ti–10V–2Fe–3V in β processing via experiment and simulation

252

Study on the dynamical behaviors of a two-dimensional discrete system Original Research Article

253

Study on the early stage of thin film growth in pulsed beam deposition by kinetic Monte Carlo simulation

254

Study on the economic and environmental benefits of different EV powertrain topologies

255

Study on the edge isolation of industrial silicon solar cells with waterjet-guided laser

256

Study on The Effect of Demulsifers on Crude oil and Petroleum Products

257

Study on the effect and mechanism of zirconia on the sinterability of yttria transparent ceramic

258

Study on the effect of a non-solvent additive on the morphology and performance of ultrafiltration hollow-fiber membranes Original Research Article

259

Study on the effect of adding co-solvent (n-alkoxyethanol) to sulfolan on the toluene extraction

260

Study on the effect of aminosilane functionalized nanoclay on the curing kinetics of epoxy nanocomposites

261

Study on the effect of apatite structure on spectroscopic properties of bismuth activated alkaline earth metal chlorophosphate [M5(PO4)3Cl; M = Ca, Sr and Ba]

262

Study on the effect of basalt fiber on the energy absorption characteristics of porous material

263

Study on the Effect of Bridge Windbreaks on the Aerodynamic Characteristics of High-Speed Trains Meeting under Crosswind

264

Study on the Effect of Casting Pressure on the Wear Resistance of Al-Si Alloy Prepared by Squeeze Casting

265

Study on the effect of cooling rate on the solidification parameters, microstructure, and mechanical properties of LM13 alloy using cooling curve thermal analysis technique

266

Study on the effect of corrosion on the tensile properties of the 1.0 wt.% Yttrium modified AZ91 magnesium alloy

267

Study on the Effect of Crocodile ICT 605 Software on Mathematics Learning for Teaching Flowchart Based on Constructivism Theory

268

Study on the effect of cultivation parameters and pretreatment on Rhizopus oryzae cell-catalyzed transesterification of vegetable oils for biodiesel production

269

Study on the effect of cutting location on shoot and IBA on rooting of ‘Night Jessamine’ (Cestrum nocturnum) stem cuttings

270

Study on the effect of different acids on the structure and photocatalytic activity of mesoporous titania

271

Study on the Effect of Different Growing Media on the Growth and Yield of Gerbera (Gerbera jamesonii L.)

272

Study on the effect of different plant density on some morphological traits and yield of safflower under irrigated and rain-fed planting conditions

273

Study on the effect of different protein sources on skeletal muscles of male albino rats

274

Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals

275

Study on the effect of dispersion phase morphology on porous structure of poly (lactic acid)/poly (ethylene terephthalate glycol-modified) blending foams

276

Study on the effect of distance between the two nozzle holes on interaction of high pressure combustion-gas jets with liquid

277

Study on the effect of engine operation parameters on cyclic combustion variations and correlation coefficient between the pressure-related parameters of a CNG engine

278

Study on the effect of flow maldistribution on the performance of the hollow fiber modules used in membrane distillation

279

Study on the Effect of Forming Parameters in Sheet Hydrodynamic Deep Drawing Using FEM-based Taguchi Method

280

Study on the effect of functionally graded coating layers on elastic deformation of thick circular plates: A closed-form elasticity solution

281

Study on the effect of hexamethylene diamine functionalized graphene oxide on the curing kinetics of epoxy nanocomposites

282

Study on the effect of humate and its removal on the precipitation of aluminium trihydroxide from the Bayer process

283

Study on the Effect of humic acid fertilizer on the amount of water loss in the single cross maize cultivar

284

Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel

285

Study on the effect of laser post-treatment on the properties of nanostructured Al2O3–TiB2–TiN based coatings developed by combined SHS and laser surface alloying

286

Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel

287

Study on the effect of left displacement of abomasum (LDA) on some serum minerals and biochemical changes in dairy cows

288

Study on the Effect of Levulinic Acid on Whey-Based Biosynthesis of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Hydrogenophaga pseudoflava

289

Study on the Effect of Oxygen Defects on the Electrical and Optical Properties of Thin Films

290

Study on the Effect of Paliurus spina-christi on Cholesterol, Triglyceride and HDL Levels in Diabetic Male Rats Fed a High Cholesterol Diet

291

Study on the effect of phenol anchored multiwall carbon nanotube on the curing kinetics of epoxy/Novolac resins

292

STUDY ON THE EFFECT OF PLANTING METHODS, PHOSPHORUS FERTILIZER AND SPRAYING WITH SOME NUTRIENTS UNDER NEWLY RECLAIMED SOILS ON YIELD AND QUALITY OF SUGAR BEET (BETA VULGARIS L.)

293

Study on the effect of polybutyl-2-cyanoacrylate nanoparticles and their metabolites on the phagocytic activity of peritoneal exudate cells of mice

294

Study on the Effect of Pomegranate Peel and Walnut Green Husk Extracts on the Antibacterial and Dyeing Properties of Wool Yarn Treated by Chitosan/Ag, Chitosan/Cu Nano-particles

295

Study on the effect of presence of TiH2 particles on the roll bonding behavior of aluminum alloy strips

296

Study on the effect of pressure and cooling rate on the solidification Characteristics and mechanical properties of Al-11%Si cast alloy

297

Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy

298

Study on the Effect of Rainfall Level on the Size of Silver Nanoparticles Synthesized by Plants of the Lamiaceae Family in Different Regions of Iran

299

Study on the effect of rare earth metal triflates as initiators in the cationic curing of DGEBA/γ-valerolactone mixtures and characterization of the thermosets obtained

300

Study on The Effect of Royal Jelly on Reproductive Parameters in Streptozotocin-Induced Diabetic Rats

301

Study on the effect of shape-stabilized phase change materials on spacecraft thermal control in extreme thermal environment

302

Study on the Effect of Small Molecule Compounds on the Structure and Properties of Coal

303

Study on the Effect of Solution Conditions on Heat Induced-Aggregation of Human Alpha Interferon

304

Study on the effect of solvent on the inclusion interaction of hydroxypropyl-β-cyclodextrin with three kinds of coumarins by phase solubility method

305

Study on the effect of sound duration on the annoyance of helicopter noise by applying a technique of time compression and expansion of sound signals

306

STUDY ON THE EFFECT OF SPACERS ON THE ULTIMATE CAPACITY OF INTERMEDIATE LENGTH THIN WALLED SECTION UNDER COMPRESSION

307

Study on the effect of structure of polydimethylsiloxane grafted with polyethyleneoxide on surface activities

308

Study on the effect of surface modifier on self-aggregation behavior of Ag nano-particle

309

Study on the effect of surfactants on morphologies of trigonal selenium in microfluidic reactor

310

Study on the Effect of Teachers’ Text Specific Comments and Rubber-Stamped Comments on Iranian EFL Learners’ Writing Ability

311

Study on the effect of temperature and pressure on nickel-electroplating characteristics in supercritical CO2

312

Study on the Effect of Temperature Requirements on Samany and Zaghloul Date Palms Performance under Three Different Conditions.

313

Study on the effect of the crack length on the JIC value Original Research Article

314

Study on the Effect of the Position of X-bracing Arrangement in the Steel Structures with a Triangular Plan

315

Study on the effect of the thermal regime differences in roadbed slopes on their thawing features in permafrost regions of Qinghai–Tibetan plateau

316

Study on the Effect of Total Intravenous Anesthesia (TIVA) on the Post-operative Respiratory Performance Regarding Early Extubation after Coronary Artery Bypass Graft (CABG) Surgery

317

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

318

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

319

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

320

Study on the effect of ultrasonic waves on the characteristics of electroless nickel deposits from an acid bath

321

Study on the Effect of Vitamin C on the In Vitro Albumin Glycation Reaction

322

Study on the effect of wellbore heat capacity on steam injection well heat loss

323

Study on the effective decontamination and hydrolysis of sulfur mustard agent simulant using tenorite (CuO) nanoparticles as a destructive catalyst

324

Study on the effective decontamination and hydrolysis of sulfur mustard agent simulant using tenorite (CuO) nanoparticles as a destructive catalyst

325

Study on the Effectiveness of Prevention Strategies for the COVID-19 Pandemic: A Case Study in Ezhou, China

326

Study on the effectiveness of thermally treated rice husks for petroleum adsorption

327

Study on the effects and properties of hydrophobic poly(tetrafluoroethylene) membrane Original Research Article

328

Study on The Effects of Boron on The Structure of Chloroplasts of Cauliflower , By Using Light Scattering Technique

329

Study on the effects of chemical cleaning on pinaceae resin-based varnishes from panel and canvas paintings using pyrolysis-gas chromatography/mass spectrometry

330

Study on the effects of different sulfur vaporization temperature on the properties of CuInS2 thin films

331

Study on the Effects of Educational Environment (Physical Space and Educational Tools) on Learning and Teaching Mathematics

332

Study on the effects of hydraulically interconnected suspension system parameters on vehicle vibration characteristics

333

Study on the effects of matrix yield strength on hydride phase stability in Zircaloy-2 and Zr 2.5 wt% Nb

334

Study on the effects of mechanical pressure to the ultrastructure and secretion ability of mandibular condylar chondrocytes

335

Study on the Effects of Multimedia Monitoring System in Medical Teachers’ Microteaching Training

336

Study on the effects of probiotic, Pediococcusacidilactici in the diet on some biological indices of Oscar Astronautsocellatus

337

Study on the effects of pulsed TIG welding parameters on delta-ferrite content, shape factor and bead quality in orbital welding of AISI 316L stainless steel plate

338

Study on the effects of red pepper (Capsicum annuum) extract on immune responses and resistance of rainbow trout (Oncorhynchus mykiss) juveniles against Yersinia ruckeri

339

STUDY ON THE EFFECTS OF SEX HORMONES ON THE STRUCTURE OF GONADS AND TESTOSTERONE LEVEL IN POSTNATAL FEMALE RATS (N.M.RJ)

340

Study on the effects of spacer geometry in membrane feed channels using three-dimensional computational flow modeling

341

Study on the effects of the different temperatures on the viability of Sarcocystis bradyzoites

342

Study on the effects of the length and angle of inclined plate on the thixotropic microstructure of A356 aluminum alloy

343

Study on the Effects of the Resources for Fixing Budget Deficit on the Rate of Inflation in Iran in the Years 2001 to 2004.

344

Study on the effects of time, geographical side and color of wrapping materials on graft union percentage and scion growth of three commercial citrus cultivars on Mexican lime rootstock

345

Study on the effects of transformational leadership by managers and organizational justice consciousness on organizational citizenship behaviour of high-tech electronics industry in Taiwan

346

Study on the effects of well number on temperature characteristics in 1.3-μm InGaAsP–InP quantum-well lasers

347

Study on the Efficacy of Spirituality-Based Intervention on Spiritual Well Being of Patients with Leukemia: A Randomized Clinical Trial

348

Study on the efficacy of weed control in wheat (Triticum aestivum L.) with tank mixtures of grass herbicides with broadleaved herbicides

349

Study on the Efficiency of a Multi-layer Perceptron Neural Network Based on the Number of Hidden Layers and Nodes for Diagnosing Coronary- Artery Disease

350

Study on the efficiency of effective thermal conductivities on melting characteristics of latent heat storage capsules

351

Study on the Efficiency of Mathematics Distance Education

352

Study on the Efficiency of the Different units for Removing Metallic ions in Isfahan Water Treatment Plant

353

Study on the efficiency of the digging process using the model of excavator bucket

354

Study on the elastic–plastic interface and large deformation of axisymmetric disks under rotating status

355

Study on the electrical and mechanical properties of phenol formaldehyde resin/graphite composite for bipolar plate

356

Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates

357

Study on the electrical and optical properties of Ag/Al-doped ZnO coatings deposited by electron beam evaporation

358

Study on the electrical conductivity and oxygen diffusion of oxide-ion conductors La2Mo2−xTxO9−δ (T = Al, Fe, Mn, Nb, V)

359

Study on the electrical properties and the effect of heat treatment on structure of Ge-Se-Te alloys

360

Study on the electrochemical behavior and differential pulse voltammetric determination of rhein using a nanoparticle composite film-modified electrode

361

Study on the electrochemical behavior of anticancer herbal drug rutin and its interaction with DNA

362

Study on the electrochemical behavior of dopamine with poly(sulfosalicylic acid) modified glassy carbon electrode

363

Study on the electrochemical behavior of dopamine with poly(sulfosalicylic acid) modified glassy carbon electrode Original Research Article

364

Study on the electrochemical behavior of epinephrine at a poly(3-methylthiophene)-modified glassy carbon electrode

365

Study on the electrochemical behavior of the viologen monolayers by different chemical structure

366

Study on the electrochemical behavior of vanadium nitride as a promising supercapacitor material Original Research Article

367

Study on the electrochemical characteristics of quasi-solid-state electric double layer capacitors assembled with sulfonated poly(ether ether ketone)

368

Study on the electrochemical detection of the macrolide antibiotics clarithromycin and roxithromycin in reversed-phase high-performance liquid chromatography

369

Study on the electrochemical performance of high-cycle LiMg0.08Mn1.92O4 cathode material prepared by a solid-state combustion synthesis

370

Study on the electrochemical properties of Mg0.8Ti0.1Al0.1−xPdxNi (x = 0.02–0.08) hydrogen storage alloys

371

Study on the electrochemiluminescent behavior of menadione sodium bisulfite in presence of luminol

372

Study on the electrodissolution and roughening of a palladium electrode in chloride containing solutions

373

Study on the electron cyclotron resonance plasma chemical vapor deposition of carbon nanotubes

374

Study on the electron momentum density distribution and the Fermi surface of the ordered inter-metallic phase B2-NiAl

375

Study on the electron structure and optical properties of Ga0.5Al0.5As(1 0 0) β2(2 × 4) reconstruction surface

376

Study on the electronic effect on coordinating donors in heptacoordinate trichlorogermanes

377

Study on the electronic effects on stereoconservativity of Suzuki coupling in chiral groove of binaphthyl

378

Study on the electronic structure of phenylene vinylene dimers with different substituents

379

Study on the electronic structure of pyrazoline derivatives with different substituents

380

Study on the electronic structures and absorption spectra for sheelite- and the sheelite-like structures lead tungstate crystal

381

Study on the electronic structures and absorption spectra for sheelite- and the sheelite-like structures lead tungstate crystal

382

Study on the electronic structures of the reduced anatase TiO2 by the first-principle calculation Original Research Article

383

Study on the electrostatic adsorption self-assembly multilayers fabricated by sulphonated elastomer and TiO2 colloids

384

Study on the emission mechanism during devolatilization/char oxidation and direct oxidation of olive solid waste in a fixed bed reactor

385

Study on the emission mechanism during devolatilization/char oxidation and direct oxidation of olive solid waste in a fixed bed reactor

386

Study on the Emission Performance of Clinical Waste Incinerator Plants in Malaysia

387

STUDY ON THE EMPATHIC SKILL LEVELS OF ELEMENTARY SCHOOL FOURTH GRADE STUDENTS AND THE PARENTAL ATTITUDES PERCEIVED BY THEM

388

Study on the energy band structure and photoelectrochemical performances of spinel Li4Ti5O12

389

Study on the energy response to neutrons for a new scintillating-fiber-array neutron detector

390

Study on the energy response to neutrons for a new scintillating-fiber-array neutron detector

391

Study on the enhancement of catalytic activity for hemoglobin by quinhydrone in poly(o-aminophenol) film

392

Study on the enhancement of electrochemiluminescence of luminol–H2O2 system by sulphonated cobalt(II) phthalocyanine Original Research Article

393

Study on the Environmental Factors Contributing to Distribution of Thymus kotschyanus in Taleghan Basin, Iran

394

Study on the environmentally friendly anodizing of AZ91D magnesium alloy

395

Study on the environment-resource-economy comprehensive efficiency evaluation of the biohydrogen production technology

396

Study on the equivalent circuit and coupled vibration for the longitudinally polarized piezoelectric ceramic hollow cylinders

397

Study on the Erosion Characteristics of Non-spherical Particles in Liquid-solid Two-phase Flow

398

Study on the essential management system of the coal mines

399

Study on the estimation of precipitation resources for rainwater harvesting agriculture in semi-arid land of China

400

Study on the ET Process of SOD at Cysteine Modified Gold Electrode

401

Study on the eutectic modification level of Al–7Si Alloy by computer aided recognition of thermal analysis cooling curves

402

Study on the evaluation of localized corrosion of 2024T3 aluminum alloy with EIS

403

Study on the evaluation of localized corrosion of 2024T3 aluminum alloy with EIS

404

Study on the evolution of dynamic mechanics properties of cement mortar under sulfate attack

405

STUDY ON THE EVOLUTION OF THE BODY HEIGHT SIZES IN MALE YOUNG HORSES OF THE SHAGYA BREED

406

Study on the evolution processes from TiCx to TiB2 induced by B in Al melt

407

Study on the excited state intramolecular proton transfer of 4′-N,N-diethylamino-3-hydroxyflavone in imidazolium-based room temperature ionic liquids

408

Study on the exergy loss of the horizontal concentric micro-fin tube heat exchanger

409

Study on the expansion of concrete under attack of sulfate and sulfate–chloride ions

410

Study on the extensibility of video conferencing with speech mixing

411

Study on the extension of lean operation limit through hydrogen enrichment in a natural gas spark-ignition engine

412

Study on the extraction of palladium(II) and platinum(IV) using LIX 84I

413

Study on the fabrication conditions of TiO2 pillared porous manganese oxide nanocompound

414

Study on the fabrication of Al matrix composites strengthened by combined in-situ alumina particle and in-situ alloying elements

415

Study on the factors affecting simultaneous removal of ammonia and manganese by pilot-scale biological aerated filter (BAF) for drinking water pre-treatment

416

Study on the failure behavior of three dierent stabilized problematic soils

417

Study on the fate of As, Hg and Pb in Yima coal via sub-critical water extraction

418

Study on the fate of metal elements from biomass in a bench-scale fluidized bed gasifier

419

Study on the fate of petroleum-derived polycyclic aromatic hydrocarbons (PAHs) and the effect of chemical dispersant using an enclosed ecosystem, mesocosm

420

Study on the fatigue crack growth rates of Ti–5Al–5Mo–5V–1Cr-1Fe titanium alloy with basket-weave microstructure

421

Study on the fatigue of steel highway bridges in Japan

422

Study on the fatigue properties of plasma nitriding S45C with a pre-ultrasonic nanocrystal surface modification process

423

Study on the fatigue strength of AA 6082-T6 adhesive lap joints

424

Study on the Fault Diagnosis Technique of Aerial Camera Exposure Board Based on Petri Net

425

Study on the Fauna of Aquatic Insects in Northwestern Iran

426

Study on the FCC Process in a Novel Riser-Downer-Coupling Reactor (I): Hydrodynamics and Mixing Behaviors

427

Study on the FCC Process in a Novel Riser-Downer-Coupling Reactor (II): Simulation and Hot Experiments

428

Study on the feasibility of split crossing distillation compartment boundary

429

Study on the feasibility of the torsion extrusion (TE) process as a severe plastic deformation method for consolidation of Al powder

430

Study on the features of multiwalled carbon nanotube supported nickel aluminum mixed oxides Original Research Article

431

Study on the ferrite grain refinement during intercritical deformation of a microalloyed steel

432

Study on the ferroelectricity of Eu substituted films

433

Study on the ferromagnetism in Co and N doped ZnO thin films

434

Study on the fingerprint profile of Monascus products with HPLC–FD, PAD and MS

435

Study on the fishing performance of an alternative tubular-type pot for the common octopus, Octopus minor, in Korean coastal waters

436

Study on the flexural behaviors of RC beams after freeze-thaw cycles

437

Study on the flexural fatigue performance and fractal mechanism of concrete with high proportions of ground granulated blast-furnace slag

438

STUDY ON THE FLEXURAL VIBRATION OF RECTANGULAR THIN PLATES WITH FREE BOUNDARY CONDITIONS

439

Study on the floatation mechanism and floatation performance for the floatation cyclone of natural inlet air

440

Study on the flocs poly-β-hydroxybutyrate production and process optimization in the bio-flocs technology system

441

Study on the flotation behaviour of low energy materials at low surface tensions

442

Study on the flow distribution in prismatic VHTR core with a multi-block experiment and CFD analysis

443

Study on the flow production characteristics of deep geothermal wells

444

Study on the flow structure at the spanwise edge of spreading turbulent region and its control

445

Study on the fluidity of AZ91+xRE magnesium alloy

446

Study on the fluidity of AZ91+xRE magnesium alloy

447

Study on the fluidization and discharge characteristics of cohesive coals from an aerated hopper

448

Study on the fluorescence characteristics of bromadiolone in aqueous and organized media and application in analysis

449

Study on the fluoride adsorption of various apatite materials in aqueous solution

450

Study on the foaming behaviour of allyl ether-based polycarboxylate superplasticizers

451

Study on the formation and phase transformation of 1D nanostructured Fe3O4 particles under an external magnetic field

452

Study on the formation and transport of ozone in relation to the air quality management and vegetation protection in Tenerife (Canary Islands)

453

Study on the formation during the production of lead-free piezoceramics at the morphotropic phase boundary

454

Study on the formation of an apatite layer on NiTi shape memory alloy using a chemical treatment method

455

Study on the formation of CoxFe3−xO4 system using two low temperature synthesis methods

456

Study on the formation of cubic texture in Ni–7 at.% W alloy substrates by powder metallurgy routes Original Research Article

457

Study on the formation of MCr2O4/SiO2 nanocomposites from hybrid gels PVA–TEOS–metal nitrates

458

Study on the formation of new Mg–Cu–Ti–Y quaternary bulk metallic glasses with high mechanical strength

459

Study on the formation of PbSe nanoclusters at the interfaces of PbSe/ZnSe multiple quantum well structure

460

Study on the formation of periodic ridges on the rubber surface by friction and wear monitoring

461

Study on the formation of phenols during coal flash pyrolysis using pyrolysis-GC/MS

462

Study on the formation of rhenium borides by density functional calculations

463

Study on the formation of silicon nanoparticles during laser ablation using a low-pressure differential mobility analyzer

464

Study on the formation of the Prussian blue films on the polypyrrole surface as a potential mediator system for biosensing applications Original Research Article

465

Study on the formation of β-crystal during the crystallization process of polypropylene reactor granule

466

Study on the formation process of Al2O3–TiO2 composite powders

467

Study on the formation, determination, and removal of elemental sulfur in ultra-low sulfur gas oil

468

Study on the forming parameters of the metal bellows

469

Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method

470

Study on the fracture reason and fatigue life for guide pillar of injection machine

471

Study on the fragmentation of shells

472

Study on the free vibration of thick functionally graded rectangular plates according to a new exact closed-form procedure

473

Study on the freezing characteristics of silty clay under high loading conditions

474

Study on the frequency of pregnant ewes slaughtered in Khorram Abad abattoir, Iran.

475

Study on the Frequent Expression of Rodgers and Chido, Red Blood Cell Antigens, in Iranian Healthy Population

476

Study on the friction and wear behavior of basalt fabric composites filled with graphite and nano-SiO2

477

Study on the friction and wear behavior of POM/Al2O3 nanocomposites

478

Study on the friction and wear performance of carbon fabric/phenolic composites under oil lubricated conditions

479

Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles

480

Study on the friction and wear properties of glass fabric composites filled with nano- and micro-particles under different conditions

481

Study on the friction and wear properties of glass fabric composites filled with nano- and micro-particles under different conditions

482

Study on the friction and wear properties of the composites made of surface modified-Nomex fabrics

483

Study on the friction coefficient in grinding

484

Study on the Friction of Bored Cylindrical Rubber Protrusions Sliding on Ceramic

485

Study on the friction of κ-carrageenan hydrogels in air and aqueous environments

486

Study on the fuel balance of a DT reactor

487

Study on the fundamental characteristics of a filter press dryer with a featured model dryer

488

STUDY ON THE FUNDAMENTAL FREQUENCIES OF RECTANGULAR CONCRETE TANKS USING FEM AND ANALYTICAL CODES

489

Study on the fuzzy ranking of granite sawability

490

Study on the gas evolution and char structural change during pyrolysis of cotton stalk

491

Study on the gas evolution and char structural change during pyrolysis of cotton stalk

492

Study on the gas phase HBr-catalyzed reaction between UF6 and SiH4 at room temperature Original Research Article

493

Study on the gasification of wastepaper/carbon dioxide catalyzed by molten carbonate salts

494

Study on the gas-phase photolytic and photocatalytic oxidation of trichloroethylene

495

Study on the gas–solid flow and heat transfer characteristics of evaporating recycle valve

496

Study on the gel casting of fused silica glass

497

Study on the general principle of normal circular-arc gear transmission

498

Study on the generalized mathematical model of noncircular gears

499

Study on the generalized thermoelastic vibration of the optically excited semiconducting microcantilevers

500

Study on the genomic diversity of Hymenolepis nana between rat and mouse isolates by RAPD-PCR

501

Study on the genotoxicity of HA/ZrO2 composite particles in vitro

502

Study on the genus Triaspis Haliday, 1835 (Hymenoptera: Braconidae, Brachistinae) in Northern Iran, with two new records

503

Study on the genus Triaspis Haliday, 1835 (Hymenoptera: Braconidae, Brachistinae) in Northern Iran, with two new records

504

Study on the glycerolysis reaction of high free fatty acid oils for use as biodiesel feedstock

505

Study on the grafting of chitosan–gelatin microcapsules onto cotton fabrics and its antibacterial effect

506

Study on the granular characteristics of starches separated from Chinese rice cultivars

507

Study on the graphite and carbon fiber modified asphalt concrete

508

Study on the green upconversion saturation in Er3+ doped oxyfluoride tellurite glass

509

Study on the grinding of advanced ceramics with slotted diamond wheels

510

Study on the ground surface quality of Cr2O3 coatings

511

Study on the Groundwater Accumulation of Oke-Ogba Area using Groundmagnetic Survey

512

Study on the growth and optical activity of Sr3NbGa3Si2O14 single crystals

513

Study on the growth and optical activity of Sr3NbGa3Si2O14 single crystals

514

Study on the growth and survival of Escherichia coliO157:H7 during the manufacture and storage of Iranianwhite cheese in brine

515

Study on the growth and thermal characteristics of mercury indium telluride crystals

516

Study on the growth mechanism of silver nanorods in the nanowire-seeding polyol process

517

Study on the growth of (Achillea millefolium L.) medicinal plant by soil inoculation of mountainous area with selected mycorrhizal fungi

518

Study on the growth parameters of Capoeta trutta (Heckel, 1843) in Shour River, Iran

519

Study on the harm effects of releases from liquid hydrogen tank by consequence modeling

520

Study on the heat hazard of deep exploitation in high-temperature mines and its evaluation index

521

Study on the heat transfer and flow characteristics in a spiral-coil tube

522

Study on the heat transfer and sorption characteristics of a consolidated composite sorbent for solar-powered thermochemical cooling systems

523

Study on the heat transfer characteristics of an evaporative cooling tower

524

Study on the heat transfer characteristics of the annular fin under dry-surface, partially wet-surface, and fully wet-surface conditions

525

Study on the heat transfer of high-vacuum-multilayer-insulation tank after sudden, catastrophic loss of insulating vacuum Original Research Article

526

Study on the heavy metal bioconcentrations of the Shadegan international wetland mosquitofish, Gambusia affinis, by inductively coupled plasma technique

527

Study on the Heck reaction promoted by carbene adduct of cyclopalladated ferrocenylimine and the related reaction mechanism

528

Study on the height effect of highway embankments in permafrost regions

529

Study on the heterogeneous degradation of chitosan with H2O2 catalyzed by a new supermolecular assembly crystal: [C6H8N2]6H3[PW12O40]·2H2O Original Research Article

530

Study on the heterogeneous degradation of chitosan with hydrogen peroxide under the catalysis of phosphotungstic acid

531

STUDY ON THE HETEROZIS EFFECT IN EARLY EMBRYOGENESIS OF THE COMMERCIAL CHICKEN BROILER HYBRIDS

532

Study on the high-pressure properties of KCl crystal by inversion pair potentials

533

Study on the hole-type traps in BaFCl:Eu2+ phosphor

534

Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map

535

Study on the hydration heat of binder paste in high-performance concrete

536

Study on the hydration of Ba-bearing calcium sulphoaluminate in the presence of gypsum

537

Study on the hydrodynamics of the Ebro river lower course using tritium as a radiotracer

538

Study on the hydroforming process for automobile radiator support members

539

Study on the hydrogen demand in China based on system dynamics model

540

Study on the hydrogen desorption mechanism of a Mg–V composite prepared by SPS

541

Study on the hydrogen storage properties and reaction mechanism of NaAlH4–MgH2–LiBH4 ternary-hydride system

542

Study on the hydrogen storage properties of core–shell structured Mg–RE (RE = Nd, Gd, Er) nano-composites synthesized through arc plasma method

543

Study on the hydrogenation of Zircaloy-4

544

Study on the hydrolytic degradation of poly(α,β-malic acid) by direct polycondensation

545

Study on the hydrophobic surfaces prepared by two-step sol–gel process

546

Study on the hydrothermal reaction of FeCl 3 solution in the presence of poly(vinyl alcohol)

547

Study on the hydrothermal stability of MCM-41 via secondary restructure

548

Study on the hydrothermal treatment of Shenhua coal

549

Study on the hygiene knowledge of food handlers working in small and medium-sized companies in western Romania

550

STUDY ON THE IMMATURE STAGES OF POEKILOCERUS PICTUS (FABRICUS, 1775) (ORTHOPTERA: ACRIDOIDEA: PYRGOMORPHIDAE)

551

Study on the immune enhancement of different immunoadjuvants used in the pentavalent vaccine for turbots

552

Study on the immunogenicity of pcDNA3.1(+)-cagT recombinant vector against Helicobacter pylori in BALB/c mice

553

Study on the immunopathologic effects of 4(3H)-quinazolinone-2-ethyl-2-phenyl ethyl (QEPE) in newborn Balb/C mice

554

Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method

555

STUDY ON THE IMPEDANCE-MATCHING TECHNIQUE FOR HIGH-TEMPERATURE SUPERCONDUCTING MICROSTRIP ANTENNAS

556

Study on the Implementation of Drainage System at Universiti Tun Hussein Onn Malaysia (UTHM)

557

Study on the improvement in continuously variable transmission efficiency with a thermal management system

558

Study on the inclusion interactions of β-cyclodextrin and its derivative with dyes by spectrofluorimetry and its analytical application

559

Study on the incorporation of photovoltaic systems as an auxiliary power source for hybrid and electric vehicles

560

Study on the increase mechanism of the caffeine content during the fermentation of tea with microorganisms

561

Study on the increase of inactive germanium layer in a high-purity germanium detector after a long time operation applying MCNP code

562

Study on the increase of inactive germanium layer in a high-purity germanium detector after a long time operation applying MCNP code

563

Study on the indentation size effect in CaF2: Dislocation structure and hardness Original Research Article

564

Study on the industry internationalization of Taiwanese opera

565

Study on the inertance tube and double-inlet phase shifting modes in pulse tube refrigerators

566

Study on the inertia effect of helical spring of the absorber on suppressing the dynamic responses of a beam subjected to a moving load

567

Study on the infectivity of Trypanosoma evansi isolate in Savannah Brown bucks

568

Study on the influence of additives in an industrial calcium fluoride and waterworks sludge co-melting system

569

Study on the influence of adiponectin genetic variants and adiponectin levels among Indonesian women with polycystic ovary syndrome

570

Study on the influence of airflow on the temperature of the surrounding rock in a cold region tunnel and its application to insulation layer design

571

Study on the influence of albedo on building heat environment in a year-round

572

Study on the influence of attached mortar content on the properties of recycled concrete aggregate

573

Study on the influence of channel structure properties in the dehydration of glycerol to acrolein over H-zeolite catalysts Original Research Article

574

Study on the influence of friction in an automatic ball balancing system

575

Study on the influence of heat treatment on the crystallographic phases of nanostructured TiO2 films

576

Study on the Influence of Several Elements of Scanned Patterns on the Quality of 3D Body Scanned Data by using Structured Light Technique

577

Study on the influence of steel-fibre-reinforced concrete on the behaviour of anchorage for steel liners Original Research Article

578

Study on the influence of the free volume of hybrid membrane on pervaporation performance by positron annihilation spectroscopy

579

Study on the influence of the so-called filtration enzyme action on the membrane filtration process of wheat starch hydrolysates Original Research Article

580

Study on the Influence of Thermal Stress in the Firing of a Ceramic Body

581

Study on the Influence of Thermal Stress in the Firing of a Ceramic Body

582

Study on the influence of TiO2 on the insulating strength of ZnO–ZnF2–B2O3 glasses by means of dielectric properties

583

Study on the influence of work-hardening modeling in springback prediction

584

Study on the influence of X-ray tube spectral distribution on the analysis of bulk samples and thin films: Fundamental parameters method and theoretical coefficient algorithms

585

Study on the influence of X-ray tube spectral distribution on the analysis of bulk samples and thin films: Fundamental parameters method and theoretical coefficient algorithms

586

Study on the influences of geometrical parameters on the formability of stretch curved flanging by numerical simulation

587

Study on the inhomogeneity of single crystal along the growth direction

588

Study on the initial electrodeposition behavior of Ni–P alloys

589

Study on the initial stages of water corrosion of fluorozirconate glasses

590

Study on the initiation stage of stress corrosion of an aluminum alloy using the subjective speckle technique

591

Study on the initiation step of 2-(9-carbazolyl)ethyl glycidyl ether polymerization by K−, K+ (15-crown-5)2

592

Study on the initiation step of vinyloxirane and 3-butenyloxirane polymerization by alkalide K−, K+(15-crown-5)2

593

Study on the inner surface finishing of aluminum alloy 2014 by ball burnishing process

594

Study on the inorganic–organic surface modification of potassium titanate whisker

595

Study on the insertion behaviors of Lithium-ions into CoFe3Sb12 based electrodes

596

Study on the insertion process of human apolipoprotein H into spread phospholipid monolayers by monitoring the initial change in surface pressure

597

Study on the integrated membrane processes of dehumidification of compressed air and vapor permeation processes

598

Study on the Intentional Choice Mechanism of Course Selection Based on Swarm Intelligence Algorithm

599

Study on the interaction and relation of society, economy and environment based on PCA–VAR model: As a case study of the Bohai Rim region, China

600

Study on the interaction between a fluorine-containing amphiphilic cationic copolymer and nucleic acid by resonance light scattering technique

601

Study on the interaction between aglycon of daunorubicin and calf thymus DNA by spectroscopy

602

Study on the interaction between anionic and cationic latex particles and Portland cement

603

Study on the interaction between bovine serum albumin and CdTe quantum dots with spectroscopic techniques

604

Study on the interaction between CdTe quantum dots and folic acid by two-photon excited fluorescence spectroscopic techniques

605

Study on the interaction between cinnamic acid and lysozyme

606

Study on the interaction between clozapine and bovine serum albumin

607

Study on the interaction between different solute molecules in a molecular beam produced by the spray-jet technique: an application to dendrimer/dye system

608

Study on the interaction between dihydromyricetin and bovine serum albumin by spectroscopic techniques

609

Study on the interaction between dihydroxybenzenes and DTAB by ultramicroelectrode voltammetry

610

Study on the interaction between gliadins and a coumarin as molecular model system of the gliadins–anthocyanidins complexes

611

Study on the interaction between HIV reverse transcriptase and its non-nucleoside inhibitor nevirapine by capillary electrophoresis

612

Study on the Interaction between Isatin-β-Thiosemicarbazone and Calf Thymus DNA by Spectroscopic Techniques

613

Study on the interaction between methyl blue and human serum albumin by fluorescence spectrometry

614

Study on the interaction between methylene violet and calf thymus DNA by molecular spectroscopy

615

Study on the interaction between oxolinic acid aggregates and protein and its analytical application Original Research Article

616

Study on the interaction between promethazine hydrochloride and bovine serum albumin by fluorescence spectroscopy

617

Study on the interaction between silver nanoparticles and nucleic acids in the presence of cetyltrimethylammonium bromide and its analytical application

618

Study on the interaction between tabersonine and human serum albumin by optical spectroscopy and molecular modeling methods

619

Study on the Interaction between the chiral drug of propranolol and α1-acid glycoprotein by fluorescence spectrophotometry

620

Study on the interaction between theasinesin and human serum albumin by fluorescence spectroscopy

621

Study on the interaction mechanism between DNA and the main active components in Scutellaria baicalensis Georgi

622

Study on the interaction of 3,3-bis(4-hydroxy-1-naphthyl)-phthalide with bovine serum albumin by fluorescence spectroscopy

623

Study on the Interaction of 4'-Hydroxychalcones and their Mannich Derivatives with Calf Thymus DNA by TLC and Spectroscopic Methods, a DNA Cleavage Study

624

Study on the interaction of 6-thioguanine with bovine serum albumin by spectroscopic techniques

625

Study on the interaction of catechins with human serum albumin using spectroscopic and electrophoretic techniques

626

Study on the interaction of CdTe quantum dots with coumaric acid and caffeic acid based on fluorescence reversible tune

627

Study on the interaction of CdTe quantum dots with ferulic acid and protocatechuic aldehyde by optical spectroscopy

628

Study on the interaction of food colourant quinoline yellow with bovine serum albumin by spectroscopic techniques

629

Study on the interaction of glycyrrhizin and glycyrrhetinic acid with RNA

630

Study on the interaction of homoisoflavonoids with RNA

631

Study on the interaction of La3+ with bovine serum albumin at molecular level

632

Study on the interaction of low-energy ions with organisms

633

Study on the interaction of methane gas with poly(phenylene oxide) membrane using infrared spectroscopic method

634

Study on the interaction of nicotinamide with sepiolite, loughlinite and palygorskite by IR spectroscopy

635

Study on the interaction of nucleic acids with silver nanoparticles—Al(III) by resonance light scattering technique and its analytical application

636

Study on the interaction of porphyrin with G-quadruplex DNAs Original Research Article

637

Study on the interaction of protein with Sulfonazo III by Rayleigh light scattering technique and its application Original Research Article

638

Study on the interaction of sedimenting cylindrical particles in still fluid

639

Study on the interaction of sulforaphane with human and bovine serum albumins

640

Study on the interaction of tamiflu and oseltamivir carboxylate with human serum albumin

641

Study on the interaction of the antiviral drug, zidovudine with DNA using neutral red (NR) and methylene blue (MB) dyes

642

Study on the interaction of the drug mesalamine with calf thymus DNA using molecular docking and spectroscopic techniques

643

Study on the interaction of three structurally related cationic Pt(II) complexes with human serum albumin: importance of binding affinity and denaturing properties

644

Study on the interaction of tropisetron hydrochloride and l-tryptophan by spectrofluorimetry and its analytical application

645

Study on the interactions between anti-HIV-1 active compounds with trans-activation response RNA by affinity capillary electrophoresis

646

Study on the intercalation of hexacyanoferrate(II) in a Ni, Al based hydrotalcite

647

Study on the interdiffusion in base-metal-electrode MLCCs

648

Study on the interface between the organic and inorganic semiconductors

649

Study on the interface of phenolic resin/expanded graphite composites prepared via in situ polymerization

650

Study on the interface reaction behavior of NiCrAlY coating on titanium alloy

651

Study on the interfacial bonding state and fouling phenomena of polyvinylidene fluoride matrix-reinforced hollow fiber membranes during microfiltration Original Research Article

652

Study on the interfacial evaporation of aqueous solution of SDS surfactant self-assembly monolayer

653

Study on the interfacial layer in ZnO/GaN heterostructure light-emitting diode

654

Study on the interfacial properties of viscous capillary flow of dilute acetic acid solutions of chitosan

655

Study on the interfacial properties of viscous capillary flow of dilute acetic acid solutions of chitosan

656

Study on the intermolecular interactions of alkylcobaloxime complexes (RCo(dmgH)2L, dmgH=dimethylglyoxime, R=alkyl, L=H2O or pyridine)

657

Study on the internal stress of nickel coating electrodeposited in an electrolyte mixed with supercritical carbon dioxide

658

Study on the inter-subspecies nuclear transfer of river buffalo somatic cell nuclei into swamp buffalo oocyte cytoplasm

659

Study on the inventory control of deteriorating items under VMI model based on bi-level programming

660

Study on the Isentropic Equations of Nucleotide Sequences and Their Application

661

Study on the ITO work function and hole injection barrier at the interface of ITO/a-Si:H(p) in amorphous/crystalline silicon heterojunction solar cells

662

Study on the I–V characteristics of ferroelectric thin film systems with the structure of MFSM

663

Study on the I–V characteristics of ferroelectric thin film systems with the structure of MFSM

664

Study on the Keggin zinctungstates based hybrid compound with like DNA spiral chain

665

Study on the Key Success Factors of the Operation of a Regional Military Logistic Food Material Center

666

Study on the key technologies of the Transfer Equipment Cask for Tokamak Equator Port Plug

667

Study on the kinetic properties of phosphor in deoxycholate aggregates by phosphorescent quenching methodology

668

Study on the kinetics of cerium(III) adsorption–desorption on different soils of China

669

Study on the kinetics of enzymatic interesterification of triglycerides for biodiesel production with methyl acetate as the acyl acceptor

670

Study on the kinetics of ferrocene derivatives in polymer electrolyte/electrode interface at microelectrode

671

Study on the kinetics of iron oxide leaching by oxalic acid

672

Study on the kinetics of isothermal decomposition of selenites from IVB group of the periodic system

673

Study on the kinetics of keto-enol tautomerism of p-hydroxyphenylpyruvic acid using capillary electrophoresis

674

Study on the kinetics of the isothermal decomposition of selenites from IIIB group of the periodic system

675

Study on the kinetics of the thermal decompositions of ammonium molybdates

676

Study on the kinetics of thermal decomposition of mechanically activated pyrites

677

Study on the kinetics properties of lithium hexafluorophosphate thermal decomposition reaction

678

Study on the Lane Mark Identification Method in Intelligent Vehicle Navigation

679

Study on the Langmuir aggregation of fluorinated surfactants on protein

680

Study on the lattice distortion of the As-prepared nanosized TiO2 particles via detonation method Original Research Article

681

Study on the layer spalling of the KMPS546 speed reducer input conical

682

Study on the leaching behavior of salt waste forms prepared by using zeolite and lime glass

683

Study on the leaching of phthalates from polyethylene terephthalate bottles into mineral water Original Research Article

684

Study on the levelling process of the current collector for the molten carbonate fuel cell based on curvature integration method

685

Study on the Li and B Co-doped diamond thin film

686

Study on the lifestyle of disadvantaged women at risk of type 2 diabetes under the support of social welfare center of Zanjan city in 2018

687

Study on the lifetime of M-intermediate of bacteriorhodopsin film chemically modified with CeO2 nanoparticles

688

Study on the Linezolid Prescription According to the Approval of Indication in a University Hospital

689

Study on the liquefaction of Shengli lignite with NaOH/methanol

690

Study on the LLFPs transmutation in a super-critical water-cooled fast reactor

691

Study on the LLT solid electrolyte thin film with LiPON interlayer intervening between LLT and electrodes

692

Study on the load distribution of ball screws with errors

693

Study on the local structure of (CrO6)9− complex in garnet crystals by optical and EPR spectrum Original Research Article

694

Study on the long wavelength SiGe/Si heterojunction internal photoemission infrared photodetectors

695

Study on the longitudinal damping system for circular accelerators

696

Study on the Long-Period source mechanism at Campi Flegrei (Italy) by a multi-parametric analysis

697

Study on the low-temperature annealing-induced color center in Y3+-doped PbWO4 single crystal

698

Study on the low-temperature annealing-induced color center in Y3+-doped PbWO4 single crystal

699

Study on the lubrication properties of biodiesel as fuel lubricity enhancers

700

Study on the luminescence behavior of lanthanide ions using luminol as probe

701

Study on the luminescence of sulfosalicylic acid in SiO2–B2O3 xerogels

702

Study on the luminescence of sulfosalicylic acid in SiO2–B2O3 xerogels

703

Study on the luminescence properties of n-ZnO/i-NiO/n-GaN isotype heterojunction diodes

704

Study on the machinability characteristics of superalloy Inconel 718 during high speed turning

705

Study on the Machining Distortion of Thin-walled Part Caused by Redistribution of Residual Stress

706

Study on the macrosegregation of aluminium in centrifugal-cast ZA27 alloy

707

Study on the macrosegregation of aluminium in centrifugal-cast ZA27 alloy

708

Study on the magnetic susceptibility of Li1−xNaxCu2O2 single crystals

709

Study on the magnetic-polarization-resonance-synchronous-fluorimetry and its application to simultaneous determination of polycyclic aromatic hydrocarbons Original Research Article

710

Study on the maltooligosaccharide composition of mucilage samples collected along the northern Adriatic coast Original Research Article

711

Study on the Management of Ectopic Pregnancy in Women s Health Center-Assiut University Hospitals

712

Study on the Management of Pregnancies Complicated by Late Preterm Prelabour Rupture of Membranes between 34 and 37 Weeks of Gestation in Woman s Health Centre-Assiut University:A Prospective Study

713

Study on the Marketing Mix of Iranian Football Industry

714

Study on the mass transfer of bubble swarms in three different rheological fluids

715

Study on the matching performance of a low temperature reverse Brayton air refrigerator

716

Study on the Material of the Inside Ring Coupler in a Loop Plasma Antenna with Circular Coupler

717

Study on the matrix effect in the determination of selected pharmaceutical residues in seawater by solid-phase extraction and ultra-high-performance liquid chromatography–electrospray ionization low-energy collision-induced dissociation tandem mass spectr

718

Study on the Maximum Entropy Principle applied to the annual wind speed probability distribution: A case study for observations of intertidal zone anemometer towers of Rudong in East China Sea

719

Study on the maximum m superplasticity deformation of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy

720

Study on the mean dipole moments of Dagang atmosphere residue fractions

721

Study on the measurement method for resistivity of mineral powder — Taking micro-crystal muscovite for example

722

Study on the mechanical and chemical properties of (Ti,Al)N films prepared by DC magnetron sputtering

723

Study on the Mechanical and Corrosion behavior of AA5052 Tailor Welded Blanks Fabricated using Friction Stir Welding

724

Study on the mechanical behaviors of grey iron mould by simulation and experiment

725

Study on the mechanical heterogeneity of electron beam welded thick TC4-DT joints

726

Study on the mechanical properties and thermal conductivity of silicon carbide-, zirconia- and magnesia aluminate-based simulated inert matrix nuclear fuel materials after cyclic thermal shock

727

Study on the mechanical properties, microstructure and corrosion behaviors of nano-WC–Co–Ni–Fe hard materials through HIP and hot-press sintering processes

728

Study on the mechanical strength of primary carbonate tablets

729

Study on the mechanical transmission by tsetse fly Glossina morsitans centralis of Trypanosoma vivax, T. congolense or T. brucei brucei to goats

730

Study on the mechanism and applications of the fluorescence reactions among cobalt (II), H2O2 and two new derivatives of 8-sulfonamidoquinoline

731

Study on the mechanism of action of artemether against schistosomes: the identification of cysteine adducts of both carbon-centred free radicals derived from artemether

732

Study on the mechanism of chiral recognition with molecularly imprinted polymers Original Research Article

733

Study on the mechanism of de-embrittlement based on the theory of grain boundary segregation for 2.25Cr–1Mo steel

734

Study on the mechanism of diametral cladding strain and mixed-oxide fuel element breaching in slow-ramp extended overpower transients

735

Study on the Mechanism of Gas Ignition by Friction Effect of Hard Quartz Sandstone Instability

736

Study on the mechanism of over-head-type load-haul-dump with a vessel

737

Study on the mechanism of self-organized carbon nanotips without catalyst by plasma-enhanced hot filament chemical vapor deposition

738

Study on the mechanism of the BtuF periplasmic-binding protein for vitamin B12 Original Research Article

739

Study on the mechanism of unsteady combustion related to volatile in a coal-fired traveling grate boiler

740

Study on the mechanisms and kinetics of complexʹs thermal decomposition getting anhydrous magnesium chloride

741

Study on the mechanisms and kinetics of complexʹs thermal decomposition getting anhydrous magnesium chloride

742

Study on the mechanisms and quantitative law of mode I supersonic crack propagation

743

Study on the mechanisms of photoinduced carriers separation and recombination for Fe3+–TiO2 photocatalysts

744

Study on the mediating role of innovative climate in the relationship between transformational leadership style and innovative behavior(The Case of workers in Isfahan University of Medical Sciences)

745

Study on the melt-textured technique in a magnetic field for giant magnetostrictive materials R–Fe alloy

746

Study on the membrane filtration of starch hydrolysates Original Research Article

747

Study on the MEMS-type gas sensor for detecting a nitrogen oxide gas

748

Study on the mesocarbon microbeads/polyphenylene sulfide composite bipolar plates applied for proton exchange membrane fuel cells

749

Study on the mesoscale structure of the heavy rainfall on Meiyu front with dual-Doppler RADAR

750

Study on the method of parameterized meshing and its system realization

751

Study on the method with associated particle for measuring the neutron yield of D–D neutron generator†

752

Study on the method with associated particle for measuring the neutron yield of D–D neutron generator†

753

Study on the microfabrication technique by femtosecond laser two-photon photopolymerization

754

Study on the microflora and biochemistry of cocoa fermentation in the Dominican Republic

755

Study on the microstructural evolution of high temperature adhesives for graphite bonding Original Research Article

756

Study on the microstructure and dielectric properties of X9R ceramics based on BaTiO3

757

Study on the microstructure and electrochemical kinetic properties of MmNi4.50−xMnxCo0.45Al0.30 (0.25 ≤ x ≤ 0.45) hydrogen storage alloys

758

Study on the microstructure and mechanical properties of diffusion brazing joint of C17200 Copper Beryllium alloy

759

Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding

760

Study on the microstructure and mechanical properties of Nd:YAG pulsed laser beam weld of UNS-C17200 copper beryllium alloy

761

Study on the microstructure and mechanical Properties of WE71 magnesium alloy

762

Study on the microstructure and rheological property of fish oil lyotropic liquid crystal

763

Study on the microstructure and the electrochemical properties of Ml0.7Mg0.2Ni2.8Co0.6 hydrogen storage alloy

764

Study on the microstructure and wear resistance of the composite coatings fabricated on Ti–6Al–4V under different processing conditions

765

Study on the microstructure evolution and rheological parameter of semisolid Mg–10Al–4Zn alloys

766

Study on the microstructure in a friction stir welded 2519-T87 Al alloy

767

Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts

768

Study on the microstructure of thin-layer facade plasters of thermal insulating system during artificial weathering

769

Study on the microstructure, mechanical properties, tarnish and corrosion resistance of sterling silver alloyed with manganese

770

Study on the microstructures and properties of the boride layers laser fabricated on Ti–6Al–4V alloy

771

STUDY ON THE MILK YIELD APTITUDES OF THE TURCANA SHEEP RAISED IN THE NORTH-EAST SIDE OF THE COUNTRY

772

Study on the mineralization and degradation of isoproturon in three soils

773

Study on the minimum number of SRVs required for emergency depressurization in EOP of BWR power plants Original Research Article

774

Study on the minimum thickness for the asymmetrical PV cold rolling of sheet

775

Study on the Miscibility and Phase Behavior of Polyoxymethylene with Novolak

776

Study on the Mitochondrial Autophagy Pathway of Apoptosis Induced by Deferoxamine in the Leukemia Cell Line HL-60

777

Study on the mixed system of liquid crystalline epoxy/epoxy resin

778

Study on the Mixing Behavior of Thin Liquid-Sheet Impinging Jets Using the PLIF Technique

779

Study on the mixture strain hardening of multi-phase steels

780

Study on the mode transitions for rf power dissipation in capacitively coupled plasma

781

Study on the model experiment and numerical simulation for underground coal gasification

782

Study on the modeling of timed-token protocol

783

Study on the modification of bleached eucalyptus kraft pulp using birch xylan

784

Study on the modification of Cu-based catalysts with cupric silicate for methanol synthesis from synthesis gas

785

Study on the modification of positively charged composite nanofiltration membrane by TiO2 nanoparticles Original Research Article

786

Study on the Molecular Interaction of Anthocyanin-rich Eggplant Extracts with Bovine α-Lactalbumin

787

Study on the molecular mechanism of inhibiting HIV-1 integrase by EBR28 peptide via molecular modeling approach Original Research Article

788

Study on the molecularly imprinted polymers with methyl-testosterone as the template

789

Study on the morphology and gas permeation property of polyurethane membranes

790

Study on the morphology of CsH2PO4 using the mixture of methanol and polyols

791

Study on the morphology, crystalline structure and thermal properties of yellow ginger starch acetates with different degrees of substitution

792

Study on the morphology, rheology and surface of dynamically vulcanized chlorinated butyl rubber/polyethylacrylate extrudates: effect of extrusion temperature and times

793

Study on the most important agronomical traits of 13 tomato cultivars through factor analysis

794

Study on the mucoadhesion mechanism of pectin by atomic force microscopy and mucin-particle method

795

Study on the mucoadhesion mechanism of pectin by atomic force microscopy and mucin-particle method

796

Study on the multicommodity reliability of a capacitated-flow network

797

Study on the Multi-marker Components Quantitative HPLC Fingerprint of the Compound Chinese Medicine Wuwei Changyanning Granule

798

Study on the multiple mechanisms underlying the reaction between hydroxyl radical and phenolic compounds by qualitative structure and activity relationship Original Research Article

799

Study on the multiple sites binding of human serum albumin and porphyrin by affinity capillary electrophoresis

800

Study on the Multiple-Key-Pair Generation Scheme Based on Grey Half-generation

801

Study on the multirecognition mechanism of supramolecular interaction in the thiabendazole/β-cyclodextrin/Triton X-100

802

Study on the mutagenicity and antimutagenicity of a natural food colour (annatto) in mouse bone marrow cells

803

Study on the mutagenicity and antimutagenicity of β-ionone in the Salmonella/microsome assay

804

Study on the nano machining process with a vibrating AFM tip on the polymer surface

805

Study on the natural circulation characteristics of the integral type reactor for vertical and inclined conditions

806

Study on the natural circulation characteristics of the integral type reactor for vertical and inclined conditions Original Research Article

807

Study on the Natural Soil Properties Endau Rompin National Park (PETA) as Compacted Soil Liner for Sanitary Landfill

808

Study on the negative differential resistance properties of self-assembled organic thin films by using STM

809

Study on the new bone cement based on calcium sulfate and Mg, CO3 doped hydroxyapatite

810

Study on the new control scheme of class-E inverter for IH-jar application with clamped voltage characteristics using pulse frequency modulation

811

Study on the new fluorescence enhancement system of Tb-1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane in silver chloride collosol and its analytical application Original Research Article

812

Study on the new fluorescence enhancement system of Zn–bis-(trimethylolaminomethane)-4-tert-butyl-disalicylicimine in the presence of β-cyclodextrin and its analytical application

813

Study on the new graph constructed by a commutative ring

814

Study on the new hydrogenation catalyst and processes for hydrogen peroxide through anthraquinone route

815

Study on the NH3-gas sensitive properties and sensitive mechanism of polypyrrole

816

Study on the nitrobenzene hydrogenation over a Pd-B/SiO2 amorphous catalyst Original Research Article

817

Study on the NN Decoupling Control System of Air-cushioned Headbox

818

Study on the non aromatic rice (Oryza sativa L.) varietals resistance to rice stem borers (Lepidoptera: Pyralidae) and yield factors

819

Study on the non-isothermal crystallization behaviors of PA6/silica nanocomposites prepared by the sol–gel process

820

Study on the non-isothermal curing kinetics of a polyfurfuryl alcohol bioresin by DSC using different amounts of catalyst

821

Study on the nonlinear optical properties of substituted ketene N,S-acetals

822

Study on the non-linear property of abnormally grown grain ZnO

823

Study on the normal state resistivity of doped Ru-1222 system

824

Study on the novel rare-earth nanocrystals/PNIPAM complex hydrogels prepared by surface-initiated living radical polymerization

825

Study on the novel ultrasonic weld properties of heterogeneous polymers between PC and PMMA

826

Study on the NPK Uptake and Growth of Rice under Two different Cropping Systems with different Doses of Organic Fertilizer in the Imogiri Subdistrict, Yogyakarta Province, Indonesia

827

Study on the nutrient composition of hydroponic water dropwort (Oenanthe stolonifera DC)

828

Study on the nutritional ecology of wild primates

829

STUDY ON THE OCCLUSIONS BETWEEN RAYS AND NURBS SURFACES IN OPTICAL METHODS

830

Study on the occurrence of pesticide residues in fruit-based soft drinks from the EU market and morocco using liquid chromatography–mass spectrometry

831

Study on the odor classification in dynamical concentration robust against humidity and temperature changes

832

Study on the oligosaccharides composition of the water-soluble fraction of marine mucilage by electrospray tandem mass spectrometry

833

Study on the onset of nucleate boiling in narrow annular channel by genetic neural network

834

Study on the operating performance of cross hot-gas bypass defrosting system for air-to-water screw heat pumps

835

Study on the operational conditions of a double-gap resistive plate chamber for the CMS

836

Study on the operational conditions of a double-gap resistive plate chamber for the CMS

837

Study on the operational control of helical fusion reactor FFHR-d1

838

Study on the Optical and Rheological properties of polymer- layered Silicate Nanocomposites

839

Study on the optical performance and characterization method of texture on KH2PO4 surface processed by single point diamond turning

840

Study on the optical polarized properties for the PbWO4 crystal with a pair of

841

Study on the optical properties of PPV/TiO2 nanocomposites

842

Study on the optical properties of Zn1−xMgxS (0 ≤ x ≤ 0.55) quantum dots prepared by precipitation method

843

Study on the optimal intercropping width to control wind erosion in North China

844

Study on the optimal level of cactus pear (Opuntia ficus-indica) supplementation to sheep and its contribution as source of water

845

Study on the Optimization Method of Select Query Sentence in Standard SQL Language

846

Study on the optoelectronic properties of amorphous selenium-based xerographic photoreceptors for electrophotography

847

Study on the orientation degree of Pb1 − xLaxTiO3 thin films by the rocking curve technique and its morphological aspects

848

Study on the orientation of silver films by ion-beam assisted deposition

849

Study on the origin of sediment formation in a high pressure near zero sulfur diesel hydrotreater

850

Study on the oscillation dissolved behavior of oxysophocarpine in water

851

Study on the outdoor thermal environment and thermal comfort around campus clusters in subtropical urban areas

852

Study on the oxidation of calcium sulfide using TGA and FTIR

853

Study on the oxidation of stainless steels 304 and 304L in humid air and the friction during hot rolling

854

Study on the Oxidative Leaching of Uranium from the Lignite in the CO32−/HCO3−System

855

Study on the parasites of Pseudorhombus elevatus, Psettodes erumei and Brachirus orientalis from the Persian Gulf, Iran

856

Study on the parasitic and microbial contamination of vegetables, and the effect of washing procedures on their elimination in Ilam city

857

Study on the passive safe technology for the prevention of air ingress during the primary-pipe rupture accident of HTGR

858

Study on the passive safe technology for the prevention of air ingress during the primary-pipe rupture accident of HTGR Original Research Article

859

Study on The Pedigrees of Three Cases of Whole-Arm Translocation in Hainan China and Literature Review: A Retrospective Study

860

Study on the performance of a new type of water-repellent admixture for cement mortar

861

Study on the Performance of a Novel Air-bleeding Aerodynamic Combustor Diffuser

862

Study on the performance of a proton exchange membrane fuel cell related to the structure design of a gas diffusion layer substrate

863

Study on the performance of data fusion system for sonar signal detection

864

Study on the performance of different types of three-dimensional chromatographic systems

865

Study on the Performance of High-Strength Steel Shear Wall with Opening and Pre-crack

866

Study on the performance of honeycomb ceramics carrier based on the ordinary paper

867

Study on the performance of LiCoxMn2 − xO4 − yFy using spent alkaline Zn–Mn batteries as manganese source

868

Study on the performance of multi-gap resistive plate chambers

869

Study on the performance of multi-gap resistive plate chambers

870

Study on The Performance of PECVD Silicon Nitride Thin Films

871

Study on the performance of ramie fiber modified with ethylenediamine

872

Study on the performance of SI-GaAs and SI-InP surface barrier detectors for alpha and gamma detection

873

Study on the performance of SI-GaAs and SI-InP surface barrier detectors for alpha and gamma detection

874

Study on the Performance of Wet Electroscrubber in Purifying Airborne Particles

875

Study on the performance of wetlands and impact on water quality in a densely populated urban area in Amanaka, Raipur, Chhattisgarh, India

876

Study on the performance prediction of screw vacuum pump

877

Study on the performances of SnS heterojunctions by numerical analysis

878

Study on the pervaporation performance and long-term stability of aqueous iso-propanol solution through chitosan/polyacrylonitrile hollow fiber membrane

879

Study on the phase behavior of asphalt mastic

880

Study on the phase behavior of cholesterol–acetone–CO2 system and recrystallization of cholesterol by antisolvent CO2

881

Study on the phase diagram of the Ti–B–N system and the interfacial reaction of the Ti/BN joints

882

Study on the phase diagram of the Ti–B–N system and the interfacial reaction of the Ti/BN joints

883

Study on the phase separation characteristics of HI–I2–H2SO4–H2O mixture at 20 °C

884

Study on the phase shift characteristic of the pneumatic Stirling cryocooler Original Research Article

885

Study on the phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites

886

Study on the phase-separated opaque glaze in ancient China from Qionglai kiln

887

Study on the phosphate removal from aqueous solution using modified fly ash

888

Study on the phosphorescence characterizations of palmatine chloride on the solid substrate and its interaction with ctDNA

889

Study on the photocatalytic activities of TiO2 films prepared by reactive RF sputtering

890

Study on the photocatalytic activity of K2La2Ti3O10 doped with zinc(Zn)

891

Study on the photocatalytic degradation of glyphosate by TiO2 photocatalyst Original Research Article

892

Study on the photocatalytic degradation of insecticide methomyl in water Original Research Article

893

Study on the photocatalytic degradation of trichlorfon in suspension of titanium dioxide Original Research Article

894

Study on the photocatalytic oxidation of NO2– ions using TiO2 beads as a photocatalyst Original Research Article

895

Study on the photocatalytic reduction of dichromate and photocatalytic oxidation of dichlorvos

896

Study on the photodegradation and microbiological degradation of pirimicarb insecticide by using liquid chromatography coupled with ion-trap mass spectrometry

897

Study on the photodissociation mechanisms of m-bromotoluene at 234 and 267 nm using velocity ion imaging

898

Study on the photoelectrochemical etching process of semiconducting 6H–SiC wafer

899

Study on the photo-Fenton degradation of polyvinyl alcohol in aqueous solution

900

Study on the physical basis of pressure and particle velocity combine processing

901

Study on the physical disintegration characteristics of Subang claystone subjected to a modified slaking index test

902

Study on the physicochemical properties of poly(methylmethacrylate) (PMMA) modified Pd/Fe nanocomposites: Roles of PMMA and PMMA/ethanol

903

Study on the physiology of diapause, cold hardiness and supercooling point of overwintering pupae of the pistachio fruit hull borer, Arimania comaroffi

904

STUDY ON THE PHYSIOLOGY OF ENVIRONMENT POLLUTION AND THE EFFECT OF HEATING ON THE MALATHION RESIDUE ANALYZED USING RADIOTRACER METHOD

905

Study on the polarity, solubility, and stacking characteristics of asphaltenes

906

Study on the polyethersulfone/bismaleimide blends: morphology and rheology during isothermal curing

907

Study on the polyfurfural film modified glassy carbon electrode and its application in polyphenols determination

908

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

909

Study on the Polymorphism of Bovine Lactoferrin Gene and Its Relationship with Mastitis

910

Study on the pore surface fractal dimension and surface acid–base properties of natural particles around Guanting reservoir

911

Study on the position resolution of resistive plate chamber

912

Study on the position resolution of resistive plate chamber

913

Study on the possibility of continuous-casting of bimetallic components in condition of direct connection of metals in a liquid state

914

Study on the Possibility of Eliminating Sulfuring Process in the Production of Dried Apricots

915

Study on the possibility of hydrogen peroxide pretreatment and plant system to remediate soil pollution

916

Study on the possibility of silicon nitride—silicon nitride as a material for hip prostheses

917

Study on the possibility of waste mushroom medium as a biomass resource for biorefinery

918

Study on the potency of Domperidone and Metoclopramide for spawning induction in Kutum (Rutilus frisii kutum).

919

Study on the potential of aerial cropping system in land degradation rehabilitation in south western Nigeria

920

Study on the potential of BML-approach and G-equation concept-based models for predicting swirling partially premixed combustion systems: URANS computations

921

Study on the potential use of Tunisian clays as pozzolanic material

922

Study on the powder mixing and semi-solid extrusion forming process of SiCp/2024Al composites

923

Study on the pozzolanic properties of a natural Cuban zeolitic rock by conductometric method: Kinetic parameters

924

Study on the pozzolanic properties of rice husk ash by hydrochloric acid pretreatment

925

Study on the precipitation reaction between baicalin and berberine by HPLC

926

Study on the preconditioners

927

Study on The Prediction Method of Characteristic Parameters of Solar X-ray Flares

928

Study on the preferred orientations of nearly cubic PZT particles synthesized by hydrothermal methods using TiCl3 reagent

929

Study on the preparation and characterization of a titanium-pillared clay-supported CrCe catalyst and its application to the degradation of a low concentration of chlorobenzene

930

Study on the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites

931

Study on the preparation and characterization of ultra-high molecular weight polyethylene–carbon nanotubes composite fiber

932

Study on the preparation and electrical properties of NTC thick film thermistor deposited by supersonic atmospheric plasma spraying

933

Study on the preparation and electrochemical performance of rare earth doped nano-Ni(OH)2

934

Study on the preparation and formation mechanism of barium sulphate nanoparticles modified by different organic acids

935

Study on the Preparation and Modification of Hydrazodicarbonamide

936

Study on the preparation and properties of novolac epoxy/graphite composite bipolar plate for PEMFC

937

Study on the preparation and properties of silver-doped borosilicate antibacterial glass

938

Study on the preparation method and performance of a new β-cyclodextrin bonded silica stationary phase for liquid chromatography Original Research Article

939

Study on the preparation of Al–Si functionally graded materials using power ultrasonic field

940

Study on the preparation of chitosan–alginate complex membrane and the effects on adhesion and activation of endothelial cells

941

Study on the preparation of Cu/ZnO catalyst by sol–gel auto-combustion method and its application for low-temperature methanol synthesis Original Research Article

942

Study on the preparation of KCFeAl2O3 catalysts for ammonia synthesis at mild conditions followed by Mössbauer spectroscopy Original Research Article

943

Study on the preparation of LiCoO2 by multiphase redox method

944

Study on the preparation of Mn–Zn soft magnetic ferrite powders from waste Zn–Mn dry batteries

945

Study on the preparation of Ni–La–Ce oxide catalyst for steam reforming of ethanol

946

Study on the preparation of the SiCp/Al–20Si–3Cu functionally graded material using spray deposition

947

Study on the preparation of titania films for photocatalytic application by micro-arc oxidation

948

Study on the preparation of wood vinegar from biomass residues by carbonization process

949

Study on the preparation process of large particle cerium oxide

950

Study on the preparation technology of superfine ground powder of Agrocybe chaxingu Huang Original Research Article

951

Study on the Presence of HCV RNA in PBMC as Compared with Plasma of Hepatitis C Patients after Treatment

952

Study on the Presence of HCV RNA in PBMC Compared with Plasma of Patients with Hepatitis C after Treatment

953

Study on the presence of resistant diarrheagenic pathotypes in Escherichia coli isolated from patients with urinary tract infection

954

Study on the Prevalence and Species Composition of Abomasal Nematodes in Small Ruminants Slaughtered at Behshahr Town, Iran

955

Study on the Prevalence of Occult Hepatitis B Virus Infection in Patients Undergoing Hemodialysis

956

Study on the prevalence of Ovine fasciolosis in and around Dawa-Cheffa, Kemissie

957

Study on the prevalence of visceral Leishmaniasis in rodent s of Azarshahr district (new focus), northwest of Iran.

958

Study on the prevalence of visceral Leishmaniasis in rodent s of Azarshahr district (new focus), northwest of Iran.

959

Study on the process, thermodynamical isotherm and mechanism of Cr(III) uptake by Spirulina platensis Original Research Article

960

Study on the product description method for networked customization

961

Study on the Production of Bacterial Cellulose from Acetobacter xylinum using Agro-Waste

962

Study on the production of chitin and chitosan from shrimp shell by using Bacillus subtilis fermentation Original Research Article

963

Study on the production of Cr-coated Zr-1%Nb tubes as an ATF evolutionary cladding candidate

964

Study on the production of Fe–Cr–Mn–C–Si foam by nitrogen solubility difference between the liquid and solid phases

965

Study on the progress of solidification, deformation and densification during semi-solid powder rolling

966

Study on the propagation of inlet flow distortion in axial compressor using an integral method

967

Study on the properties and charge generation in dye-sensitized n-TiO2jdyejp-CuI solid state photovoltaic solar cells

968

Study on the Properties of Al-Al2O3 Composite Using Synthesized Alumina from Sol Gel Technique

969

Study on the properties of ethylenebisformamide and sorbitol plasticized corn starch (ESPTPS)

970

Study on the properties of ethylenebisformamide plasticized corn starch (EPTPS) with various original water contents of corn starch

971

Study on the properties of gelatins from skin of carp (Cyprinus carpio) caught in winter and summer season

972

Study on the properties of the copper substituted NiZn ferrites

973

Study on the Protective Effect of Methylene Blue Against the Neurological Toxicity of Carbon Monoxide in Adult Female Albino Rats

974

Study on the psychometric characteristics of Child Abuse Self Report Scale

975

Study on the Pull-In Instability of Gold Micro-Switches Using Variable Length Scale Parameter

976

Study on the purification and chemical compositions of tea glycoprotein

977

Study on the pyrolysis of phenol-formaldehyde (PF) resin and modified PF resin

978

Study on the pyrolysis of polyethylene in the presence of iron and copper chlorides

979

Study on the pyrolysis of wood-derived rayon fiber by thermogravimetry–mass spectrometry

980

Study on the pyrolytic behaviour of xylan-based hemicellulose using TG–FTIR and Py–GC–FTIR

981

Study on the pyrolytic behaviour of xylan-based hemicellulose using TG–FTIR and Py–GC–FTIR

982

Study on the quality control of cell therapy products: Determination of N-glycolylneuraminic acid incorporated into human cells by nano-flow liquid chromatography/Fourier transformation ion cyclotron mass spectrometry

983

Study on the Quality Evaluation System of College Information Network

984

Study on the quantitative relationship between the structures and electrophoretic mobilities of flavonoids in micellar electrokinetic capillary chromatography

985

Study on the racemization of synephrine by off-column chiral high-performance liquid chromatography

986

Study on the radial jet velocity distribution of two closely spaced opposed jets

987

Study on the radial vibration of a new type of composite piezoelectric transducer

988

STUDY ON THE RADIATION ACOUSTIC FIELD OF RECTANGULAR RADIATORS IN FLEXURAL VIBRATION

989

Study on the radiation flux and temperature distributions of the concentrator–receiver system in a solar dish/Stirling power facility

990

Study on the radiative 5D4→7Fj relaxation dynamics of Tb(III) in electrochemically excited self-assembled dimeric heterodinuclear Tb(III)–Ln(III)′ chelates Original Research Article

991

Study on the radioactive pollution in urban features using knowledge-based fuzzy classification of VHR satellite imagery

992

Study on the Raman scattering measurements of Mn ion implanted GaN

993

Study on the Rapid Drawdown and Its Effect on Portal Subsidence of Heybat Sultan Twin Tunnels in KurdistanIraq

994

Study on the rapid pressure–strain rate in the second-moment closure for turbulent flows undergoing strong compression and large distortion

995

Study on the rare earth sealing procedure of the porous film of anodized Al6061/SiCp

996

Study on the rate of using, awareness and satisfaction of scientific database by Mazandaran University of Medical Science student’s and related factors to itc

997

Study on the reaction degree of calcined coal gangue powder in blended cement by selective solution method

998

Study on the reaction kinetics between PBT and epoxy by a novel rheological method

999

Study on the reaction mechanism and mechanical properties of aluminum matrix composites fabricated in an Al–ZrO2–B system

1000

Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu–Ti–C system

بازگشت