ليست عنوان مقالات لاتين Influence of low-pressure plasma treatment on adhesive bonding between polybutylene terephthalat (PBT) and aluminum Influence of mucin type on polymer-mucin rheological interactions

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of low-pressure plasma treatment on adhesive bonding between polybutylene terephthalat (PBT) and aluminum

2

Influence of low-rank coal char properties on their SO2 removal capacity from flue gases. 2. Activated chars Original Research Article

3

Influence of low-rank coal char properties on their SO2 removal capacity from flue gases: I. Non-activated chars Original Research Article

4

Influence of low-sodium mixtures of salts on the post-salting stage of dry-cured ham process Original Research Article

5

Influence of low-strain deformation characteristics of high strength sheet steel on curl and springback in bend-under-tension tests

6

Influence of low-temperature air oxidation on the dissolution behaviour of high burn-up LWR spent fuel

7

Influence of low-temperature physical hardening on stiffness and tensile strength of asphalt concrete and stone mastic asphalt

8

Influence of low-temperature stress on the production of zearalenone by three Fusarium species in vitro

9

Influence of LPE growth conditions on the electroluminescence properties of InP/InGaAs(P) infrared emitting diodes

10

Influence of LPE process technological conditions on Si ELO layers morphology

11

Influence of L-type activated carbons on photocatalytic activity of TiO2 in 4-chlorophenol photodegradation

12

INFLUENCE OF LUBRICANT COMPOSITIONS WITH ADDITIVES ON THE OPERABILITY OF GRAY-IRON VS GALVANIC CHROME COATING FRICTION PAIRS

13

Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part I: Experimental study

14

Influence of lubricant oil on heat transfer performance of refrigerant flow boiling inside small diameter tubes. Part II: Correlations

15

Influence of lubricants on plain bearing performance: Evaluation of bearing performance with polymer-containing oils

16

Influence of lumbricid earthworms on yield and quality of wheat and clover in glasshouse trials

17

Influence of Lumbricus terrestris inoculation on green manure disappearance and the decomposer community in a walnut orchard

18

Influence of Lumbricus terrestris inoculation on green manure disappearance and the decomposer community in a walnut orchard

19

Influence of luminance distribution on the appetizingly fresh appearance of cabbage

20

Influence of lunar cycle, moon driven tides and water physicochemical factors on the gonadal maturation of green mussel, Perna viridis, in the inner Malampaya sound, Taytay, Palawan, Philippines

21

Influence of lung oxidant and antioxidant status on alveolarization: Role of light-exposed total parenteral nutrition

22

Influence of lustrous carbon defects on the fatigue life of ductile iron castings using lost foam process

23

Influence of lysophosphatidylcholine on the gelation of diluted wheat starch suspensions

24

Influence of lysozyme on the precipitation of calcium carbonate: a kinetic and morphologic study

25

Influence of lysozyme, yeast, azoxystrobin, and myclobutanil on fungal diseases of cucumbers grown hydroponically

26

Influence of M. tibialis anterior fatigue on the walk-to-run and run-to-walk transition in non-steady state locomotion

27

Influence of maceral content on δ13C and δ15N in a Middle Pennsylvanian coal

28

Influence of Machine Exploitation Effectiveness on Furniture Production Quality Level

29

Influence of machine tool setting parameters on EHD lubrication in hypoid gears

30

Influence of machining parameters on surface roughness and dry friction

31

Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants

32

Influence of machining-induced martensite on hydrogen-assisted fracture of AISI type 304 austenitic stainless steel

33

Influence of macro- and micronutrient fertilization on fungal contamination and fumonisin production in corn grains

34

Influence of macro segregation on hydrogen environment embrittlement of SUS 316L stainless steel

35

Influence of macrofauna long-term natural variability on benthic indices used in ecological quality assessment

36

Influence of macrohabitat preferences on the distribution of European brook and river lampreys: Implications for conservation and management

37

Influence of macromolecular additives on transport properties of lithium organic electrolytes

38

Influence of macromolecule adsorption during filtration of a membrane bioreactor mixed liquor suspension

39

Influence of macroporous gold support and its functionalization on lactate oxidase-based biosensors response

40

Influence of macroporous protein scaffolds on bone tissue engineering from bone marrow stem cells

41

Influence of macroscopic residual stresses on the mechanical behavior and microstructure of porcelain tile

42

Influence of macrostructure of society on the life situation of families with a child with intellectual disability: Sweden as an example

43

Influence of maghemite concentration on magnetic interactions in maghemite/PTT-block-PTMO nanocomposite

44

Influence of magma ascent rate on carbon dioxide degassing at oceanic ridges: Message in a bubble

45

Influence of magma dynamics on melt structure: spectroscopic studies on volcanic glasses from the Cretaio Tephra of Ischia (Italy)

46

Influence of magmatism on mantle cooling, surface heat flow and Urey ratio

47

Influence of magnesia on sintering stress of alumina

48

Influence of magnesia on the structure and properties of bioactive glasses

49

Influence of magnesia on the structure and properties of MgO-Al2O3-SiO2-F− glass-ceramics

50

Influence of magnesia surface on the setting time of magnesia–phosphate cement

51

Influence of magnesium and chromium oxides on the physicochemical properties of γ-alumina Original Research Article

52

Influence of magnesium deficiency on the bioavailability and tissue distribution of iron in the rat

53

Influence of magnesium doping on the phase transformation temperature of β-TCP ceramics examined by Rietveld refinement

54

Influence of magnesium hydroxide content and fineness on the carbonation of calcium hydroxide

55

Influence of magnesium ions on heat shock and ethanol stress responses of Saccharomyces cerevisiae

56

Influence of magnesium nitrate on the corrosion performance of sol–gel coated AA2024-T3 aluminium alloy

57

Influence of magnesium on electrochemical properties of RE3–xMgx(Ni0.7Co0.2Mn0.1)9 (x=0.5–1.25) alloy electrodes

58

Influence of magnesium on grain refinement and ductility in a dilute Al–Sc alloy Original Research Article

59

Influence of magnesium on hydrogenated ScAl1−xMgx alloys: A theoretical study

60

Influence of magnesium perchlorate on the pyrolysis of organic compounds in Mars analogue soils

61

Influence of magnetic (Fe+3) and non-magnetic (Ga+3) ion doping at Mn-site on the transport and magnetic properties of La0.7Ca0.3MnO3

62

Influence of magnetic annealing on high-frequency magnetic properties of FeCoNd films

63

Influence of Magnetic Annealing on Properties of SmFe Thin Films

64

Influence of magnetic arc oscillation and current pulsing on fatigue behavior of alloy 718 TIG weldments

65

Influence of magnetic arc oscillation and current pulsing on microstructure and high temperature tensile strength of alloy 718 TIG weldments

66

Influence of magnetic clusters on electrical and magnetic properties of In1−xMnxSb/GaAs dilute magnetic semiconductor grown by liquid phase epitaxy

67

Influence of Magnetic Field and Slip on Jeffrey Fluid in a Ciliated Symmetric Channel with Metachronal Wave Pattern

68

Influence of Magnetic Field and Slip on Jeffrey Fluid in a Ciliated Symmetric Channel with Metachronal Wave Pattern

69

Influence of magnetic field configurations on divertor plasma parameters in the W7-AS stellarator

70

Influence of magnetic field deformation by ferromagnetic wall materials on MHD flows in pipes and ducts of fusion blankets

71

Influence of magnetic field errors on the spectrum of the PETRA undulator

72

Influence of magnetic field on aqueous two-phase extraction of horse ferritin in the polyethylene glycol/hydroxyethyl starch system Original Research Article

73

Influence of magnetic field on calcium carbonate precipitation Original Research Article

74

Influence of magnetic field on delayed fluorescence of coumarin dye in Langmuir–Blodgett films

75

Influence of magnetic field on electronic conduction of (Bi,Pb)–Sr–Ca–Cu–O granular superconductors

76

Inﬂuence of Magnetic Field on Fingering Instability in a Porous Medium with Cross-Diffusion Effect: a Thermal Non-equilibrium Approach

77

Influence of Magnetic Field on Fingering Instability in a Porous Medium with Cross-Diffusion Effect: a Thermal Non-equilibrium Approach

78

Influence of Magnetic Field on Fingering Instability in a Porous Medium with Cross-Diffusion Effect: a Thermal Non-equilibrium Approach

79

Influence of magnetic field on physical–chemical properties of the liquid water: Insights from experimental and theoretical models

80

Influence of magnetic field on structural defects in Si and GaAs

81

Influence of magnetic field on the adsorption of organic compound by clays modified with iron

82

Influence of magnetic field on the electronic specific heat of the organic metal (BEDT-TTF)2KHg(SCN)4

83

Influence of magnetic field on the fluidization characteristics of circulating fluidized bed

84

Influence of magnetic field on the molecular orientation in epitropic mesophase of nitrobenzene

85

Influence of magnetic field on the seeded precipitation of gibbsite from sodium aluminate solution

86

Influence of magnetic field on wear in high frequency reciprocating sliding contacts

87

Influence of magnetic field parallel to the arc on the formation of carbon nano-materials by arc discharge in water

88

Influence of magnetic field upon the electric capacity of a flat capacitor having magnetorheological elastomer as a dielectric

89

Influence of magnetic fields on negative corona discharge currents

90

Influence of magnetic forces on electrochemical mass transport

91

Influence of Magnetic Helicity in MHD

92

Influence of magnetic hysteresis on quench-voltage detection in large superconducting magnets

93

Influence of magnetic impurities on superconducting property of polycrystalline iron-based NdFeAsO0.88F0.12 Original Research Article

94

Influence of magnetic order on phonon spectra of multiferroic orthorhombic YMnO3

95

Influence of Magnetic Ordering on the Luminescence in a Layered Organic-Inorganic OPV-Ni(II) Compound

96

Influence of magnetic ordering on the resistivity anisotropy of α-MnS single crystal

97

Influence of magnetic probe presence on current sheath dynamics in plasma focus operation

98

Influence of magnetic properties of shields on recording head instability parameters

99

Influence of magnetic properties on electrochemical activity of LiNi0.5Fe0.5O2

100

Influence of magnetic properties on magnetization dynamics of high-(rho) films

101

Influence of Magnetic Saturation on Sensorless Control for Interior Permanent-Magnet Synchronous Motors With Concentrated Windings

102

Influence of magnetic water treatment on fabricsʹ characteristics

103

Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm

104

Influence of magnetism on the peak rotation of core-level photoelectrons

105

Influence of magnetite and boron carbide on radiation attenuation of cement–fiber/composite

106

Influence of magnetization rotation on martensite reorientation in magnetic shape memory alloy

107

Influence of magnetocrystalline anisotropy on the magnetization reversal mechanism in exchange bias Co/CoO bilayers

108

Influence of magnetostriction on high-frequency magnetotransport properties of current-annealed amorphous magnetic wires

109

Influence of MA-g-PP on abrasive wear behaviour of chopped sisal fibre reinforced polypropylene composites

110

Influence of Maillard conjugation on structural characteristics and rheological properties of whey protein/dextran systems

111

Influence of Maillard Reaction on Protein Modification and Colour Development in Pasta. Comparison of Different Drying Conditions

112

Influence of main channel structure on H2O2 access to the heme cavity of catalase KatE of Escherichia coli

113

Influence of maize starch granule-associated protein on the rheological properties of starch pastes. Part I. Large deformation measurements of paste properties

114

Influence of maize starch granule-associated protein on the rheological properties of starch pastes. Part II. Dynamic measurements of viscoelastic properties of starch pastes

115

Influence of major African dust intrusions on the 137Cs and 40K activities in the lower atmosphere at the Island of Tenerife

116

Influence of major inherited faults zones on gravitational slope deformation: A two-dimensional physical modelling of the La Clapière area (Southern French Alps)

117

Influence of major parameters in emulsification mechanisms using a high-pressure jet Original Research Article

118

Influence of major polyphenols on antioxidant activity in Mencيa and Brancellao red wines

119

Influence of malaxation conditions on characteristic qualities of olive oil

120

Influence of malaxation temperature and time on the quality of virgin olive oils

121

Influence of maleic anhydride grafting on the rheological properties of polyethylene terephthalate–styrene butadiene blends

122

Influence of maleic anhydride-grafted EPDM and flame retardant on interfacial interaction of glass fiber reinforced PA-66

123

Influence of Maleic-Anhydride-Polypropylene (MAPP) on the Physical Properties of Polypropylene/Sawdust fir flour Composite

124

Influence of Maleic-Anhydride-Polypropylene (MAPP) on Wettability of Polypropylene/Wood Flour/Glass Fiber Hybrid Composites

125

Influence of malocclusion on the depth of curve of Spee

126

Influence of malolactic fermentation, postfermentative treatments and ageing with lees on nitrogen compounds of red wines

127

Influence of malonic acid and triethyl-benzylammonium chloride on Zn electrowinning in zinc electrolyte

128

Influence of malt browning degree on lipoxygenase activity

129

Influence of Malt on Rheological and Baking Properties of Wheat-cassava Composite Flours

130

Influence of malt, wheat, and barley extracts on the bile tolerance of selected strains of lactobacilli Original Research Article

131

Influence of malting on selected components of soya bean, black bean, chickpea and barley

132

Influence of mammary artery as a bypass vessel on the results of seven biochemical assays after coronary artery bypass surgery

133

Influence of mammography on the management of a palpable breast lesion

134

Influence of management actions on fatigue reliability of a welded joint

135

Influence of management and precipitation on carbon fluxes in great plains grasslands

136

Influence of management practices on soil organic matter changes in the Northern China plain and Northeastern China

137

Influence of management practices on soil organic matter changes in the Northern China plain and Northeastern China

138

Influence of management regimes of adjacent land uses on the woody plant richness of hedgerows in Spanish cultural landscapes Original Research Article

139

Influence of Management System on Growth and Carcass Characteristics of Ugandan Local Chickens

140

Influence of management type on Diptera communities of coniferous plantations and deciduous woodlands

141

Influence of Managerial Skills on Completion of PPP Projects: A Case of Sondu-Miriu Power Project in Kenya

142

Influence of manganese ions on spectroscopic and dielectric properties of LiF-SrO-B2O3 glasses

143

Influence of manganese on magnetic and electronic properties of ZnCr2Se4

144

Influence of manganese on PTCR effect in BaTiO3-based ceramics doped with Bi2O3 vapor

145

Influence of manganese on stability and particle growth of hydroxyapatite in simulated body fluid

146

Influence of manganese on the structure and magnetic properties of YFeO3 nanocrystal

147

Influence of manganese promoter on co-precipitated Fe–Cu based catalysts for higher alcohols synthesis

148

Influence of manganese substitution into the A-site of perovskite type Ca1−xMnxTiO3 ceramic

149

Influence of manganese, iron and pyrolusite blending on the physiochemical properties and desulfurization activities of activated carbons from walnut shell

150

Influence of manganese, iron and pyrolusite blending on the physiochemical properties and desulfurization activities of activated carbons from walnut shell

151

Influence of mangrove reforestation on heavy metal accumulation and speciation in intertidal sediments

152

Influence of mangrove zonation on CO2 fluxes at the sediment–air interface (New Caledonia)

153

Influence of Mansonella perstans microfilaraemia on total IgE levels in Gabonese patients co-infected with Loa loa

154

Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete

155

Influence of manufacturing conditions on the conjugated linoleic acid content and the isomer composition in ripened French Emmental cheese

156

Influence of manufacturing process on the in-reactor creep anisotropy of stress-relieved Zircaloy-2 cladding Original Research Article

157

Influence of manufacturing processes and their sequence of execution on fatigue life of axle house tubes in automobiles

158

Influence of manufacturing tolerance on aircraft direct operating cost (DOC)

159

Influence of manufacturing variables on surface properties and dynamic adsorption properties of silica gels

160

Influence Of Manure Application And Nitrogen Fixing Bacteria On Yield And Yield Components Of Black Cumin (Nigella Sativa L.)

161

Influence of manure types and pyrolysis conditions on the oxidation behavior of manure char

162

Influence of Marcus convergence zone on western North Pacific summer monsoon

163

Influence of mare age, pre-breeding mare status, breeding method, and stallion on first cycle pregnancy rates on a large commercial breeding farm

164

Influence of mare age, pre-breeding mare status, breeding method, and stallion on first cycle pregnancy rates on a large commercial breeding farm

165

Influence of margin design on the fit of high-precious alloy restorations in patients

166

Influence of marginal configuration and porcelain addition on the fit of In-Ceram crowns

167

Influence of marginal highs on the accumulation of organic carbon along the continental slope off western India

168

Influence of marinades on survival during storage of acid-adapted and nonadapted Listeria monocytogenes inoculated post-drying on beef jerky

169

Influence of marine hydrocolloids on extruded and native wheat flour pastes and gels

170

Influence of marine micro-climates on carbonation of reinforced concrete buildings

171

Influence of marine phytoplankton, transition metals and sunlight on the species distribution of chromium in surface seawater

172

Influence of marine, terrestrial and anthropogenic sources on ionic and metallic composition of rainwater at a suburban site (northwest coast of Spain)

173

Influence of marital status, parenthood and housework on women’s attitude towards paid employment in Calabar, Nigeria

174

Influence of market forces on nutraceutical research: role of the academic researcher

175

Influence of market orientation and strategy on travel industry performance: an empirical study of e-commerce in Taiwan

176

Influence of Marshalling Length on Aerodynamic Characteristics of Urban Emus under Crosswind

177

Influence of martensite stabilization on the low-temperature non-linear anelasticity in Cu-Zn-Al shape memory alloys Original Research Article

178

Influence of martensite volume fraction and cooling rate on the properties of thermomechanically processed dual phase steel

179

Influence of martensite volume fraction and tempering time on tensile properties of partially austenitized in the (α+γ) temperature range and quenched + tempered ferritic ductile iron

180

Influence of Martensite Volume Fraction on Fatigue Limit of a Dual-Phase Steel

181

Influence of martensite volume fraction on tensile properties of triple phase ferrite–bainite–martensite steels

182

Influence of martensitic transformation on mechanical compatibility of biomedical β type titanium alloy TLM

183

Influence of martensitic transformation on the low-cycle fatigue behaviour of 316LN stainless steel at 77 K

184

Influence of martensitic transformation on the low-cycle fatigue behaviour of 316LN stainless steel at 77 K

185

Influence of mask design on the growth of InGaAs/InAlAs quantum wells on patterned substrates

186

Influence of masonry panels with openings on the seismic response of reinforced concrete infilled frames

187

Influence of mass and damping ratios on VIVs of a cylinder with a downstream counterpart in cruciform arrangement

188

Influence of mass difference on dynamic properties of isotope mixtures

189

Influence of mass flow rate on Turbulent Kinetic Energy (TKE) distribution in Cable-in-Conduit Conductors (CICCs) used for fusion grade magnets

190

Influence of mass of cone spring on oscillatory period

191

Influence of mass recovery on the performance of a heat pipe type ammonia sorption refrigeration system using CaCl2/activated carbon as compound adsorbent

192

Influence of mass transfer characteristics for DNAPL source depletion and contaminant flux in a highly characterized glaciofluvial aquifer

193

Influence of mass transfer on thermogravimetric analysis of combustion and gasification reactivity of coke

194

Influence of mass transfer resistance on detection of nonaqueous phase liquids with partitioning tracer tests

195

Influence of mass transfer resistance on overall nitrate removal rate in upflow sludge bed reactors

196

Influence of massive heat-pump introduction on the electricity-generation mix and the GHG effect: Comparison between Belgium, France, Germany and The Netherlands

197

Influence of massive projectile size and energy on secondary ion yields from organic surfaces

198

Influence of mass-transfer effect on isoconversional calculations

199

Influence of mastery and sexual frequency on depression in Korean men after a stroke

200

Influence of mastication and saliva on aroma release in a model mouth system

201

Influence of mastication on the concentrations of aroma volatiles — some aspects of flavour release and flavour perception

202

Influence of material and interface properties on the transformation behaviour of particle reinforced TRIP-matrix composites

203

Influence of material and internal support on natural frequencies of thin-walled cylindrical tanks

204

Influence of material and process parameters on bursting during hydroforming process

205

Influence of material and process parameters on the development of necking and bursting in flange and tube hydroforming

206

Influence of material characteristics on plastomechanics of the FSW process for T-joints

207

Influence of material models on the stress state in thermal barrier coating simulations

208

Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels

209

Influence of material properties on sliding contact braking applications

210

Influence of material properties on temperature and thermal stress of thermal barrier coating near a normal cooling hole

211

Influence of material properties on the agglomeration of water-soluble amorphous particles

212

Influence of material properties on the interaction between residual stress and springback in the case of in plane sheets forming

213

Influence of material properties on the laser-forming process of sheet metals

214

Influence of material properties on the wear of composite coatings

215

Influence of material properties upon immobilization of histidine-tagged protein on Ni–Co coated chip

216

Influence of material selection on energy demand in residential houses

217

Influence of material selection on the risk of inlay fracture during pre-cementation functional occlusal tapping

218

Influence of material structure on air-borne ultrasonic application in drying

219

Influence of material structure on air-borne ultrasonic application in drying

220

Influence of material structure on the electrochemical behavior of nickel–titanium carbonitride composites

221

Influence of material transition and interfacial area changes on flow and concentration in electro-osmotic flows Original Research Article

222

Influence of material’s ductility and local deformation mode on multiaxial fatigue response

223

Influence of maternal and fetal glucokinase mutations in gestational diabetes

224

Influence of Maternal and Postweaning Linseed Dietary Supplementation on Growth Rate, Lipid Profile, and Meat Quality Traits of Light Sarda Lambs

225

Influence of Maternal Anemia During Pregnancy on Placenta and Newborns

226

Influence of maternal dietary calcium levels on milk zinc, calcium and phosphorus contents and milk production in rats

227

Influence of Maternal Ethanol Exposure on Systemic Hemodynamic Variables and Histopathological Changes in the Aorta Wall of Male Rat Offspring: A Three-month Follow-up

228

Influence of maternal feed rationing on metabolic and contractile properties of Longissimus lumborum muscle fibres in the rabbit offspring

229

Influence of Maternal Glucose Level on Ethnic Differences in Birth Weight and Pregnancy Outcome

230

Influence of maternal hypercholesterolaemia during pregnancy on progression of early atherosclerotic lesions in childhood: Fate of Early Lesions in Children (FELIC) study Original Research Article

231

Influence of maternal oral healthcare behavior during childhood on children’s oral health care during adolescence

232

Influence of maternal undernutrition and overfeeding on cardiac ciliary neurotrophic factor receptor and ventricular size in fetal sheep

233

Influence of mathematical models in design of PV-Diesel systems

234

Influence of mating preferences on yolk testosterone in the grey partridge

235

Influence of Mating Type and Oviposition Period on Mandibular Pheromone Levels in Apis mellifera L. Honeybee Queens

236

Influence of Matric Potential on Survival and Activity of Genetically Engineered Ralstonia eutropha H850Lr.

237

Influence of Matric Potential on Survival and Activity of Genetically Engineered Ralstonia eutropha H850Lr.

238

Influence of matrices on oxygen sensing of three sensing films with chemically conjugated platinum porphyrin probes and preliminary application for monitoring of oxygen consumption of Escherichia coli (E. coli)

239

Influence of matrix activation and polymer coating on the purification of human IgG with protein A affinity membranes

240

Influence of matrix carbon texture on the temperature field of carbon/carbon composites during braking

241

Influence of matrix characteristics on tensile properties of in situ synthesized TiC/TA15 composite

242

Influence of matrix composition on polymerization stress development of experimental composites

243

Influence of matrix composition on the ternary solubility of cholesteryl esters in supercritical carbon dioxide

244

Influence of matrix conductivity and Coulomb blockade effect on the percolation threshold of insulator–conductor composites

245

Influence of matrix ductility on the high-temperature fatigue behavior of off-axis woven-ply thermoplastic and thermoset laminates

246

Influence of matrix habitats on the occurrence of insectivorous bird species in Amazonian forest fragments Original Research Article

247

Influence of matrix on conductivity properties of crystalline network of α-(BEDT-TTF)2I3 in polymer composites

248

Influence of matrix on external mass transfer resistance in immobilized urease membranes

249

Influence of matrix on third order optical nonlinearity for semiconductor nanocrystals embedded in glass thin films prepared by Rf-sputtering

250

Influence of matrix rigidity on the internal twisting of electronically excited thioflavin T in polymer nanostructures

251

Influence of matrix structure on the fatigue properties of an alloyed ductile iron

252

Influence of matrix systems on proximal contact tightness of 2- and 3-surface posterior composite restorations in vivo

253

Influence of matrix systems on proximal contact tightness of 2- and 3-surface posterior composite restorations in vivo

254

Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic- and thermosetting-composites: A comparative study

255

Influence of maturation and cooking treatments on the nutritional value of bovine meats: Water losses and vitamin B12

256

Influence of mature adipocytes on osteoblast proliferation in human primary cocultures

257

Influence of maturity and postharvest treatment on the volatile profile and physiological properties of the durian (Durio zibethinus Murray) fruit

258

Influence of maturity on carbazole and benzocarbazole distributions in crude oils and source rocks from the Sonda de Campeche, Gulf of Mexico

259

Influence of maturity on distributions of benzo- and dibenzothiophenes in Tithonian source rocks and crude oils, Sonda de Campeche, Mexico

260

Influence of MCM-41 particle on mechanical and morphological behavior of polypropylene

261

Influence of m-cresol purple indicator additions on the pH of seawater samples: correction factors evaluated from a chemical speciation model

262

Influence of MEA and piperazine additives on the desulfurization ability of MDEA aqueous for natural gas purification

263

Influence of meal time on salivary circadian cortisol rhythms and weight loss in obese women

264

Influence of mean flow profile and geometrical ratios on scattering of sound at a sudden area expansion in a duct

265

Influence of mean stress and variable amplitude loading on the fatigue behaviour of a high-strength steel in VHCF regime

266

Influence of mean stress on the multiaxial fatigue behaviour of defective materials

267

Influence of mean stresses on fatigue life and damage of a turbine blade steel in the VHCF-regime

268

Influence of measured objects parameters on CMM touch trigger probe accuracy of probing

269

Influence of measurement accuracy on the application of the 1991 NIOSH equation

270

Influence of measurement cell size on predicted attrition by the Distinct Element Method

271

Influence of measurement conditions and system parameters on accuracy of remote temperature measurement with dualspectral IR systems

272

Influence of measurement errors and estimated parameters on combustion diagnosis

273

Influence of measurement errors on stress estimated from single-phase fault/slip data

274

Influence of measurement frequency on the evaluation of short-term dose of sub-micrometric particles during indoor and outdoor generation events

275

Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification

276

Influence of measurement set-up of ground-based LiDAR for derivation of tree structure

277

Influence of measurement uncertainties on the determination of the Weibull distribution

278

Influence of measuring conditions on the thixotropy of hydrotalcite-like/montmorillonite suspension

279

INFLUENCE OF MEAT COMPONENTS ON ANTIOXIDANT ACTIVITY OF BEEF SARCOPLASMIC PROTEINS/MALONDIALDEHYDE REACTION PRODUCTS IN MODEL EMULSIONS

280

Influence of meat exudates on the quality characteristics of fresh and freeze-thawed pork

281

Influence of meat quality and NaCl percentage on glutathione peroxidase activity and values for acid-reactive substances of raw and dry-cured Longissimus dorsi

282

Influence of mechanical activation and fluorine ion on forsterite formation

283

Influence of mechanical activation and thermal treatment time on nanoparticle forsterite formation mechanism

284

Influence of mechanical activation on combustion synthesis of fine silicon carbide (SiC) powder

285

Influence of mechanical activation on selectivity of acid leaching of arsenopyrite

286

Influence of mechanical activation on sphene based ceramic material synthesis

287

Influence of mechanical activation on the alkaline leaching of enargite concentrate

288

Influence of mechanical activation on the alkaline leaching of enargite concentrate

289

Influence of mechanical activation on the synthesis and hydraulic activity of calcium dialuminate

290

Influence of mechanical agitation on cutinases and protease activity towards polyamide substrates

291

INFLUENCE OF MECHANICAL ALLOYING an‎d LEAD CONTENT ON MICROSTRUCI'URE, HARDNESS an‎d 'IRIBOLOGICAL BEHAVIOR OF 6061ALUMINIUMALLOYS

292

Influence of mechanical alloying on Ti3SiC2 formation via spark plasma sintering technique from Ti/SiC/C powders

293

Influence of mechanical and chemical activation on the hydraulic properties of gamma dicalcium silicate

294

Influence of mechanical and chemical polishing in the solubility of acrylic resins polymerized by microwave irradiation and conventional water bath

295

Influence of mechanical and chemical surface treatments on the formation of bone-like structure in cpTi for endosseous dental implants

296

Influence of Mechanical Cell Salvage on Red Blood Cell Aggregation, Deformability, and 2,3-Diphosphoglycerate in Patients Undergoing Cardiac Surgery With Cardiopulmonary Bypass

297

Influence of mechanical cycling on damping behaviour of short fibre-reinforced magnesium alloy QE22

298

Influence of mechanical distortion on the solubility of fluorapatite

299

Influence of mechanical factors on movement units in infant reaching

300

Influence of mechanical harvest on the physical properties of processing tomato (Lycopersicon esculentum Mill.) Original Research Article

301

Influence of mechanical loading on static and dynamic CO2 efflux on differently textured and managed Luvisols

302

Influence of mechanical milling time on physicochemical properties and stability of cefotaxime sodium

303

Influence of mechanical mixing intensity on a biofilm structure and permeability in a membrane bioreactor Original Research Article

304

Influence of mechanical parameters and overburden pressure on the mechanical evolution of fault propagation folds: insights from 2D finite-element elastic-plastic models applied to the Ayegan anticline, central Alborz

305

Influence of mechanical properties of the sheet material on formability in single point incremental forming

306

Influence of mechanical properties on impact fracture: Prediction of the milling behaviour of pharmaceutical powders by nanoindentation

307

Influence of mechanical properties on the nanowear of uniaxially oriented poly(ethylene terephthalate) film

308

Influence of mechanical stratigraphy and initial stress state on the formation of two fault propagation folds

309

Influence of mechanical stratigraphy and kinematics on fault scaling relations

310

Influence of mechanical stratigraphy on folding vs faulting

311

Influence of mechanical stress on nanosecond laser-induced damage threshold of fused silica

312

Influence of mechanical stresses on partial discharge in a piezoelectric solid containing cavities

313

Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M

314

Influence of mechanical ventilation system on indoor carbon dioxide and particulate matter concentration

315

Influence of mechanical ventilation-shaft connecting location on subway tunnel ventilation performance

316

Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites

317

Influence of mechanical-biological waste pre-treatment methods on the gas formation in landfills

318

Influence of mechanically milled powder and high pressure on spark plasma sintering of Mg–Cu–Gd metallic glasses Original Research Article

319

Influence of mechanically treated carbon fibre additives on structure formation and properties of autoclaved aerated concrete

320

Influence of mechanochemical activation in various media on structure of porous and non-porous silicas

321

Influence of mechano-chemical activation on biooxidation of auriferous sulphides

322

Influence of mechanochemical activation on the sintering of cordierite ceramics in the presence of Bi2O3 as a functional additive

323

Influence of media-packing ratio on performance of anaerobic hybrid reactors

324

Influence of medical audit on electrodiagnostic evaluation of polyneuropathy. A multicentre study

325

Influence of medical conditions on executive and memory functions in low socioeconomic status African Americans

326

INFLUENCE OF MEDICAL PLANTS ON HUMAN HEALTH AND URBAN ENVIRONMENT

327

Influence of medication choice and comorbid diabetes: the cost of bipolar disorder in a privately insured US population

328

Influence of mediterranean cereal-based rotations on soil micromorphological characteristics

329

Influence of medium- and long-range interactions in different folding types of globular proteins Original Research Article

330

Influence of medium chirality on electric dipole–dipole resonance energy transfer

331

Influence of medium components and fermentation conditions on the production of bacteriocin(s) by Bacillus licheniformis AnBa9

332

Influence of medium composition and explant type on plantlet regeneration in cotton (Gossypium hirsutum L.)

333

Influence of medium composition, static and stirred conditions on the proliferation of and matrix protein expression of bovine articular chondrocytes cultured in a 3-D collagen scaffold

334

Influence of medium correction of nucleon–nucleon cross-section on the fragmentation and nucleon emission Original Research Article

335

Influence of medium-chain triglyceride-based lipid emulsion on rat polymorphonuclear cell functions

336

Influence of medium-chain triglycerides on expansion and rheological properties of extruded corn starch

337

Influence of melatonin on proliferation and antioxidant system in Ehrlich ascites carcinoma cells

338

Influence of melatonin receptor 1A gene polymorphisms on seasonal reproduction in Sarda ewes with different body condition scores and ages

339

Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys

340

Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys

341

Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al–Cu alloys

342

Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces

343

Influence of melt induced mechanical anisotropy on the magnetic fabrics and rheology of deforming migmatites, Central Vosges, France

344

Influence of melt on the creep behavior of olivine–basalt aggregates under hydrous conditions

345

Influence of melt treatments and turning inserts on cutting force and surface integrity in turning of Al–12Si and Al–12Si–3Cu cast alloys

346

Influence of melt treatments and turning inserts on cutting force and surface integrity in turning of Al–7Si and Al–7Si–2.5Cu cast alloys

347

Influence of Melt Treatments on Dry Sliding Wear Behavior of Hypereutectic Al-15Si-4Cu Cast Alloys

348

Influence of melt treatments on sliding wear behavior of Al–7Si and Al–7Si–2.5Cu cast alloys

349

Influence of melt undercooling on the microstructure of levitated Cr–Mo–V tool steel

350

Influence of melt viscosity of basaltic and andesitic composition on seismic attenuation in partially molten gabbronorite

351

Influence of melting conditions on the thermal behaviour of poly(l-lactic acid)

352

Influence of Member Length Imperfection on the Capacity of Spatial Structures

353

Influence of membrane and colloid characteristics on fouling of nanofiltration membranes

354

Influence of membrane composition modification on isolated heart resistance to adrenergic actions

355

Influence of membrane fatty acid composition on cell viability and lipid peroxidation in a cell model (AR42J) of cerulein-induced acute pancreatitis

356

Influence of membrane fouling by (pretreated) surface water on rejection of pharmaceutically active compounds (PhACs) by nanofiltration membranes

357

Influence of membrane fouling reducers (MFRs) on filterability of disperse mixed liquor of Jet Loop Bioreactors

358

Influence of membrane material and corrugation and process conditions on emulsion microfiltration

359

Influence of membrane morphology on characteristics of porous hydrophobic PVDF hollow fiber contactors for CO2 stripping from water Original Research Article

360

Influence of membrane morphology on humic acid removal behavior of adsorptive membrane by embedding modified montmorillonite

361

Influence of membrane morphology on pore activation in membrane emulsification

362

Influence of membrane morphology on the flux decline during dead-end ultrafiltration of refinery and petrochemical waste water

363

Influence of membrane potentials upon reversible protonation of acidic residues from the OmpF eyelet Original Research Article

364

Influence of membrane properties on fouling in submerged membrane bioreactors

365

Influence of Membrane Properties on Pineapple Wine Clarification and Fouling Behaviour

366

Influence of membrane skin morphology on CO2/N2 separation at sub-ambient temperatures

367

Influence of Membrane Stresses on Postbuckling of Rectangular Plates Using a Nonlinear Elastic 3-D Cosserat brick Element

368

Influence of membrane support layer hydrophobicity on water flux in osmotically driven membrane processes

369

Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranes

370

Influence of membrane surface properties on the growth of neuronal cells isolated from hippocampus

371

Influence of membrane type, current and potential on the response to chemical toxicants of a microbial fuel cell based biosensor

372

Influence of menstrual cycle and salivary B-estradiol on volatile sulfur compound

373

Influence of mental disorders on receipt of revascularization following hospitalization for myocardial infarction

374

Influence of mental stress and circadian cycle on postprandial lipemia

375

Influence of Menthol Absorption on the Mechanical Properties of PET Bottles

376

Influence of menu planning strategies on the nutrient composition of Texas school lunches

377

Influence of menu planning strategies on the nutrient composition of Texas school lunches

378

Influence of Mercerization on the Dynamic Mechanical Properties of Bamboo, a Natural Lignocellulosic Composite

379

Influence of mercury environment on the fatigue behavior of spallation neutron source (SNS) target container materials

380

Influence of mercury environment on the fatigue behavior of spallation neutron source (SNS) target container materials

381

Influence of mercury on chlorophyll content in winter wheat and mercury bioaccumulation

382

Influence of mercury velocity on compatibility with type 316L/316LN stainless steel in a flow loop

383

Influence of meridional N3-ligands on supramolecular assembling and redox behavior of carboxylatocopper(II) complexes

384

Influence of Mesenchymal Stem Cells with Endothelial Progenitor Cells in Co-culture on Osteogenesis and Angiogenesis: An In Vitro Study

385

Influence of mesh density, cortical thickness and material properties on human rib fracture prediction

386

Influence of mesh size and core penetration on estimates of deep-sea nematode abundance, biomass, and diversity

387

Influence of mesh structure on 2D full shallow water equations and SCS Curve Number simulation of rainfall/runoff events

388

Influence of Mesologic Parameters On The Phytoplankton Distribution along of Transects Localized Between Cape Cantin And Dakhla

389

Influence of mesophase activation conditions on the specific capacitance of the resulting carbons

390

Influence of mesopore volume and adsorbate size on adsorption capacities of activated carbons in aqueous solutions Original Research Article

391

Influence of mesoporous substrate morphology on the structural, optical and electrical properties of RF sputtered ZnO layer deposited over porous silicon nanostructure

392

Influence of mesoscale eddies on biological production in the Mozambique Channel: Several contrasted examples from a coupled ocean-biogeochemistry model

393

Influence of mesoscale eddies on nitrate distribution during the POMME program in the northeast Atlantic Ocean

394

Influence of mesoscale eddies on spatial structuring of top predators’ communities in the Mozambique Channel

395

Influence of mesoscale features on micronekton and large pelagic fish communities in the Mozambique Channel

396

Influence of mesoscopic ordering on the photoexcitation transfer dynamics in supramolecular assemblies of oligo-p-phenylenevinylene

397

Influence of mesostasis in volcanic rocks on the alkali-aggregate reaction

398

Influence of Mesozoic distension on the triggering of halokinesis in the Prerifan ridges (Morocco, southern Rif): contribution of seismic and well data

399

Influence of mesquite (Prosopis glandulosa) on soil nitrogen and carbon development: Implications for global carbon sequestration

400

Influence of metabolic syndrome on arterial stiffness and its age-related change in young adults: the Bogalusa Heart Study

401

Influence of Metabolism on Epigenetics and Disease

402

Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar

403

Influence of Metakaolin as Partially Cement Replacement Minerals on the Properties of Cement and Concrete

404

Influence of metakaolin as supplementary cementing material on strength and durability of concretes

405

Influence of metakaolin characteristics on the mechanical properties of geopolymers

406

Influence of metakaolin on pore structure-related properties and thermodynamic stability of hydrate phases of concrete in seawater environment

407

Influence of metakaolin on the properties of mortar and concrete: A review

408

Influence of metal cathode for organic photovoltaic device performance

409

Influence of metal cations on the inhibitive effect of polyaniline for iron in 0.5 M H2SO4

410

Influence of metal cleaning methods on the resin bond strength to NiCr alloy

411

Influence of metal coating on single-walled carbon nanotube: Molecular dynamics approach to determine tensile strength

412

Influence of metal complex formation on heavy metal and free EDTA and DTPA acute toxicity determined by Daphnia magna

413

Influence of metal complexation on acidity of cytosine nucleosides: Part I, LiC, NaC and KC cation

414

Influence of metal complexes on the formation of γ-cyclodextrin-bicapped C60n− (n: 1 and 2) in aqueous solution

415

Influence of metal contacts and charge inhomogeneity on transport properties of graphene near the neutrality point

416

Influence of Metal Content on Size, Dispersion, and Magnetic Properties of Iron-Cobalt Alloy Nanoparticles Embedded in Silica Matrix

417

Influence of metal exposure history on trace metal uptake and accumulation by marine invertebrates

418

Influence of metal foam on heat transfer characteristics of refrigerant-oil mixture flow boiling inside circular tubes

419

Influence of metal grid patterns on the performance of silicon solar cells at different illumination levels

420

Influence of metal grid spacing on the conversion efficiency of concentration solar cell at different illumination levels

421

Influence of metal impurity on recycled aggregate concrete and inspection method for aluminum impurity

422

Influence of metal ion concentration in the glycol mediated synthesis of Gd2O3:Eu3+ nanophosphor

423

Influence of metal ion on electrorheological properties of carboxyl-group-immobilized chitosan dispersed suspension under electric field

424

Influence of metal ion on sorption of p-nitrophenol onto sediment in the presence of cetylpyridinium chloride Original Research Article

425

Influence of metal ions and pH on the hydraulic properties of potential acid sulfate soils

426

Influence of metal ions binding on free radical concentration in humic acids. A quantitative electron paramagnetic resonance study

427

Influence of Metal Ions on Flavonoid Protection against Asbestos-Induced Cell Injury

428

Influence of metal ions on folding pathway and conformational stability of bovine serum albumin

429

Influence of metal ions on hydrogenation of o-chloronitrobenzene over platinum colloidal clusters Original Research Article

430

Influence of Metal Ions on Oscillatory Behavior of Zinc Anode in Nitric Acid-Potassium Dichromate Media

431

Influence of metal ions on phosphatidylcholine–bovine serum albumin model membrane, an FTIR study

432

Influence of metal ions on the photocatalytic activity: Selective oxidation of benzyl alcohol on iron (III) ion-modified TiO2 using visible light

433

Influence of metal ions on the structure and spectral properties of TCNQ salts with tris(phenanthroline) cations

434

Influence of metal ions on the structure and spectral properties of TCNQ salts with tris(phenanthroline) cations

435

Influence of metal ions on the structures of Keggin polyoxometalate-based solids: Hydrothermal syntheses, crystal structures and magnetic properties

436

Influence of Metal Loading on the Mode of Metal Retention in a Natural Clay

437

Influence of metal nanoparticle decorated CNTs on polyurethane based electro active shape memory nanocomposite actuators

438

Influence of metal organic and inorganic precursors on spray pyrolyzed ceramic MgO (2 0 0) thin films for epitaxial over layers

439

Influence of metal oxide on LiBH4/2LiNH2/MgH2 system for hydrogen storage properties

440

Influence of metal oxides on PCDD/Fs formation from pentachlorophenol

441

Influence of metal oxides on the catalytic activity of nickel Original Research Article

442

Influence of metal oxides on the catalytic behavior of Au/Al2O3 for the selective reduction of NOx by hydrocarbons

443

Influence of metal oxides on the performance of Pd/Al2O3 catalysts for methane combustion under lean-fuel conditions

444

Influence of metal particle size on the hydrogenation of maleic anhydride over Pd/C catalysts in scCO2

445

Influence of metal powder particleʹs shape on the kinetics of hydriding

446

Influence of metal powder shape on drag coefficient in a spray jet

447

Influence of metal precursors on the catalytic activity and structure of non-precious metal electrocatalysts for oxygen reduction reaction

448

Influence of metal resistant-plant growth-promoting bacteria on the growth of Ricinus communis in soil contaminated with heavy metals Original Research Article

449

Influence of metal salt addition on the carbonization behavior of iodinated poly(vinyl alcohol)

450

INFLUENCE OF METAL SPECIATION IN LANDFILL LEACHATES ON KAOLINITE SORPTION

451

Influence of metal surface preparation on its surface profile, contact angle, surface energy and adhesion with glass fibre prepreg

452

Influence of metal to ligand molar ratios on the supramolecular structure formation of Cu(II) with diaminopropane and iodide: Synthesis, structure, spectroscopic and DFT studies

453

Influence of metalaxyl- and mefenoxam-based fungicides on chemical and biochemical attributes of soil quality under field conditions in a southern humid forest zone of Cameroon

454

Influence of metalaxyl- and mefenoxam-based fungicides on chemical and biochemical attributes of soil quality under field conditions in a southern humid forest zone of Cameroon

455

Influence of metalaxyl fungicide seed treatment on severity of rootworm (Diabrotica spp.) damage to corn (Zea mays) under no-tillage conditions

456

Influence of metallic and oxidized iron/steel on the reactivity of triphenyl phosphorothionate in oil solution

457

Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine

458

Influence of metallic fillers on the thermal and mechanical behaviour in composites of epoxy matrix

459

Influence of metallic ions in the bioleaching of chalcopyrite by Sulfolobus BC: Experiments using pneumatically stirred reactors and massive samples

460

Influence of metallic oxides on ethanol oxidation

461

Influence of metallic precursors on the properties of carbon-supported bismuth-promoted palladium catalysts for the selective oxidation of glucose to gluconic acid Original Research Article

462

Influence of metallic species on TiO2 for the photocatalytic degradation of dyes and dye intermediates

463

Influence of metallic trays on the ac resistance and ampacity of low-voltage cables under non-sinusoidal currents

464

Influence of Metallo Core Variation on 1-Methylimidazole Ligation to the Iron(III) in Porphyrin, Porphycene, Corrphycene, and Hemiporphycene

465

Influence of metallurgical variables on delayed hydride cracking in Zr–Nb pressure tubes

466

Influence of metal–oxide interfaces on L12 ordering in Cu3Pd Original Research Article

467

Influence of metals on IL-6 release in vitro

468

Influence of metal–support interaction in Pt/C on CO and methanol oxidation reactions

469

Influence of Metastability Errors on SNR in Successive-Approximation A/D Converters

470

Influence of metastable atoms in radio-frequency argon discharges

471

Influence of metastable hydrated phases on the pore size distribution and degree of hydration of MK-blended cements cured at 60 °C

472

Influence of meteorological conditions and particulate matter on visual range impairment in Jinan, China

473

Influence of meteorological conditions on PM2.5 and PM2.5−10 concentrations during the monsoon season in Hanoi, Vietnam

474

Influence of meteorological conditions on trans-Pacific transport of Asian dust during spring season

475

Influence of meteorological factors and air pollution on the outbreak of severe acute respiratory syndrome

476

Influence of meteorological factors and emission sources on spatial and temporal variations of PM10 concentrations in Istanbul metropolitan area

477

Influence of meteorological factors and polluting environment on rain chemistry and wet deposition in a rural area near Chimay, Belgium

478

Influence of Meteorological Factors on Date Bunch Fading Disorder

479

INFLUENCE OF METEOROLOGICAL FACTORS ON MAIZE PERFORMANCE IN LATVIA

480

Influence of meteorological factors on the atmospheric mercury measurement by a novel passive sampler

481

Influence of meteorological factors on the NO2 measurements by passive diffusion tube

482

INFLUENCE OF METEOROLOGICAL PARAMETERS IN HOURLY PATTERNS OF GRASS (POACEAE) POLLEN CONCENTRATIONS

483

INFLUENCE OF METEOROLOGICAL PARAMETERS ON THE YIELD AND CHEMICAL COMPOSITION OF COMMON BUCKWHEAT (Fagopyrum esculentum Moench

484

Influence of meteorological variability on primary production dynamics in the Ligurian Sea (NW Mediterranean Sea) with a 1D hydrodynamic/biological model

485

Influence of meteorological variability upon aerosol mass size distribution

486

Influence of methane concentration on the optical indices of Titan’s aerosols analogues

487

Influence of methane in the electrical properties of polypyrrole films doped with dodecylbenzene sulfonic acid

488

Influence of methane in the electrical properties of polypyrrole films doped with dodecylbenzene sulfonic acid

489

Influence of methanol and cyclodextrin cavity size on stoichiometry and binding constant of 3-[2-(9-anthryl)benzoxazol-5-yl]-alanine

490

Influence of methanol and its metabolites on the activity of α1-Antitrypsin

491

Influence of methanol conditioning and physical aging on carbon spin-lattice relaxation times of poly(1-trimethylsilyl-1-propyne)

492

INFLUENCE OF METHANOL EXTRACT IN SHOOT PROLIFERATION OF PLUM (PRUNUS DOMESTICA .) CV “SHENGJINE” BY IN VTRO PROPAGATION

493

Influence of methanol on catalytic activity, stability and internal dynamics of myoglobin

494

Influence of methanol on retention of hydrophobic organic chemicals in soil leaching column chromatography

495

Influence of methanolic extracts of soybean seeds and soybean oil on lipid oxidation in linseed oil

496

Influence of method of preparation of solid, double-metal cyanide complexes on their catalytic activity for synthesis of hyperbranched polymers Original Research Article

497

Influence of Method of Teaching Endodontics on the Self-Efficacy and Self-Perceived Competence of Undergraduate Dental Students

498

Influence of method of whole-wheat feeding on the performance, digestive tract development and carcass traits of broiler chickens

499

Influence of Method Supplementation of Yellow Grease on Growth Performance, Dietary Energetics, Carcass Characteristics and Nutrient Digestion of Feedlot Steers

500

Influence of Methods and Time of Sowing on Growth and Forage Productivity of Sorghum and Pearl Millet Plants

501

Influence of methoprene and dietary protein on male Anastrepha suspensa (Diptera:Tephritidae) mating aggregations

502

Influence of methoprene and temperature on diapause termination in adult females of the over-wintering solitary bee, Osmia rufa L.

503

Influence of methoxy- and nitro-substitutions in the aromatic ring on proton donation ability in hydrogen bond and on the amino group parameters of free and H-bonded molecules of 2-aminopyrimidine

504

Influence of methoxy substitution on the properties of 9,9-fluorenylidene-linked triphenylamine derivatives

505

Influence of methoxy substitution on the properties of 9,9-fluorenylidene-linked triphenylamine derivatives

506

Influence of methyl group position in bipyridine ligand on structure and luminescence of related zinc(II) nitrate complexes

507

Influence of methyl jasmonate on ginsenoside biosynthesis in suspension cultures of Panax quinquefolium L.

508

Influence of Methyl Jasmonate on Menthol Production and Gene Expression in Peppermint (Mentha x piperita L.)

509

Influence of Methyl Jasmonate on Menthol Production and Gene Expression in Peppermint (Mentha x piperita L.)

510

Influence of methylcellulose on dynamic rheology of dilute wheat gliadin solution in 50% (v/v) aqueous propanol Original Research Article

511

Influence of methylimidazole isomers on ferrocene-catalysed nitrogen doped carbon nanotube synthesis

512

Influence of methylmercury from tributary streams on mercury levels in Savannah River Asiatic clams

513

Influence of metoprolol on heart rate variability in survivors of remote myocardial infarction

514

Influence of Mg and Ce addition to ruthenium based catalysts used in the selective hydrogenation of α,β-unsaturated aldehydes Original Research Article

515

Influence of Mg and Cr substitution on structural and magnetic properties of polycrystalline Ni0.50Zn0.50−x−yMgxCryFe2O4

516

Influence of Mg and solution heat treatment on the occurrence of incipient melting in Al–Si–Cu–Mg cast alloys

517

Influence of Mg composition on the characteristics of MgZnO/ZnO heterostructures grown by co-sputtering

518

Influence of Mg doping level on morphology, optical, electrical properties and antibacterial activity of ZnO nanostructures

519

Influence of Mg doping on dielectric and optical properties of ZnO nano-plates prepared by wet chemical method

520

Influence of Mg doping on the performance of LiNiO2 matrix ceramic nanoparticles in high-voltage lithium-ion cells

521

Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy

522

Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy

523

Influence of Mg2+ concentration, pH value and specimen parameter on the hemolytic property of biodegradable magnesium

524

Influence of Mg2+ on luminescence efficiency and charge compensating mechanism in phosphor CaAl12O19:Mn4+

525

Influence of Mg2+ on the growth and activity of sulfate reducing bacteria

526

Influence of Mg2+ on the kinetics of calcite precipitation and calcite crystal morphology

527

Influence of Mg3AlNi2 content on the cycling stability of Mg2Ni–Mg3AlNi2 hydrogen storage alloy electrodes

528

Influence of Mg-containing precursor flow rate on the structural, electrical and mechanical properties of Mg-doped GaN thin films

529

INFLUENCE OF MGO ADDITION ON MICROSTRUCTURE AND PROPERTIES OF REACTION SINTERED ALUMINIUM TITANATE

530

Influence of MgO addition on the properties of new tailored FGZM/A ceramics

531

Influence of MgO and ZrO2 buffer layers on dielectric properties of Ba(Zr0.20Ti0.80)O3 thin films prepared by sol–gel processing

532

Influence of MgO on microstructure and properties of mullite–Mo composites fabricated by pulse electric current sintering

533

Influence of MgO on the formation of Ca3SiO5 and 3CaO•3Al2O3•CaSO4 minerals in alite–sulphoaluminate cement

534

Influence of MgO/CaO ratio on the properties of MgO–CaO–Al2O3–SiO2 glass–ceramics for LED packages

535

Influence of MgO-modified SBA-15 on the structure and catalytic activity of supported vanadium oxide catalysts

536

Influence of Mg-substitution on the physicochemical properties of calcium phosphate powders

537

Influence of MH electrode thickness and packing density on the electrochemical performance of air–MH batteries

538

Influence of MHC class II genotype on outcome of infection with hepatitis C virus

539

Influence of MHD and Wall Properties on the Peristaltic Transport of a Williamson Fluid with Variable Viscosity Through Porous Medium

540

Influence of MHD for Newtonian Fluid and Heat Transfer in Microchannals between Two Parallel Plates Using HAM

541

Influence of MHD on Some Oscillating Motions of a Fractional Burgers Fluid

542

Influence of MHD on Steady State Newtonian Fluid Flow in A vertical Channel With Porous Wall Using HAM

543

Influence of micaceous impurity on dynamically recrystallized quartz c-axis fabric in L-S tectonites from the Singhbhum Shear Zone and its footwall, Eastern India

544

Influence of Micro and Nano Silica on Mechanical Properties of Plasticized Sulfur Composites

545

Influence of micro structure on acoustic emission behavior during stage 2 fatigue crack growth in solution annealed, thermally aged and weld specimens of AISI type 316 stainless steel

546

Influence of micro structure on acoustic emission behavior during stage 2 fatigue crack growth in solution annealed, thermally aged and weld specimens of AISI type 316 stainless steel

547

Influence of micro/nano-textures and chemical modification on the nanotribological property of Au surface

548

Influence of microarc oxidation and hard anodizing on plain fatigue and fretting fatigue behaviour of Al–Mg–Si alloy

549

Influence of microbes on the mobilization, toxicity and biomethylation of arsenic in soil

550

Influence of microbial activity, organic carbon content, soil texture and soil depth on mineralisation rates of low concentrations of 14C-mecoprop—development of a predictive model

551

Influence of microbial activity, organic carbon content, soil texture and soil depth on mineralisation rates of low concentrations of 14C-mecoprop—development of a predictive model

552

Influence of microbial hydroxamate siderophores on Pb(II) desorption from α-FeOOH

553

INFLUENCE OF MICROBIAL TRANSGLUTAMINASE ON SOME PHYSICAL AND MICROSTRUCTURAL PROPERTIES OF COW MILK COAGULUM SUPPLEMENTED WITH WHEY PROTEINS

554

Influence of micro-blasting on the microstructure and residual stresses of CVD κ-Al2O3 coatings

555

Influence of microbubble surface charge on capillary transit and myocardial contrast enhancement

556

Influence of microcalcifications on vulnerable plaque mechanics using FSI modeling

557

Influence of microclimate and species interactions on the composition of plant and invertebrate communities in alpine northern Norway

558

Influence of micro-cracking and contact on the effective properties of composite materials

559

Influence of microcracking on crack-tip toughness of alumina

560

Influence of micro-cracking on the composite resistivity of Engineered Cementitious Composites

561

Influence of microcracks on a propagation of macrocracks

562

Influence of microdamage on fracture toughness of the human femur and tibia

563

Influence of microemulsion conditions on the VUV-excited luminescence and microstructures of Y3Al5O12: Eu3+ phosphors

564

Influence of microemulsion phases on the preparation of fine-disperse emulsions

565

Influence of microenvironment and liposomal formulation on secondary structure and bilayer interaction of lysozyme

566

Influence of microfractures and porosity on the physico-mechanical properties and weathering of ornamental granites

567

Influence of Microgravity on the Concentration of Circulating Primordial Germ Cells in Silky Chicken Offspring

568

Influence of microhabitat on seedling survival and growth of the mediterranean seagrass posidonia oceanica (l.) Delile

569

INFLUENCE OF MICROHABITAT TEMPERATURE ON COELAENOMENODERA ELAEIDIS AND ITS NATURAL ENEMIES IN NIGERIA

570

Influence of micro-habitats on the distribution of macroinvertebrates in Burkina Faso (West Africa)

571

Influence of micrometeorological factors on pesticide loss to the air during vine spraying: Data analysis with statistical and fuzzy inference models

572

Influence of micronization (fine grinding) of soya bean meal and fullfat soya bean on productive performance and digestive traits in young pigs

573

Influence of micronization (fine grinding) of soya bean meal and full-fat soya bean on the ileal digestibility of amino acids for broilers

574

Influence of micronization temperature and pre-conditioning on performance and digestibility in piglets fed barley-based diets

575

Influence of micronutrient concentration on growth and activity of sulfate reducing bacteria

576

Influence of microorganisms on Cu speciation in the rhizosphere of forest soils

577

Influence of microorganisms on Cu speciation in the rhizosphere of forest soils

578

Influence of microorganisms on the behavior of technetium and other elements in paddy soil surface water

579

Influence of microorganisms on the removal of nickel in tropical marine sediments (New Caledonia)

580

Influence of micropattern width on differentiation of human mesenchymal stem cells to vascular smooth muscle cells

581

Influence of micropolar lubricants on the performance of slot-entry hybrid journal bearing

582

Influence of micropore structure on Li-storage capacity in hard carbon spherules

583

Influence of microporosity and macroporosity on the mechanical properties of biphasic calcium phosphate bioceramics: Modelling and experiment

584

Influence of micro-porous layer and operating conditions on the fluoride release rate and degradation of PEMFC membrane electrode assemblies

585

INFLUENCE OF MICRORELIEF AND DOMINANT SPECIES ON THICKNESS OF HUMUS LAYERS ON SELECTED PLOTS IN NP ŠUMAVA

586

INFLUENCE OF MICROSCALE ENTERPRISE IN GROSS DOMESTIC PRODUCT

587

Influence of microscale turbulence on the phytoplankton of a temperate coastal embayment, Western Australia

588

Influence of microscopic particle interaction models on the flux of atmospheric antiprotons

589

Influence of microscopic transport coefficients on the formation probabilities for super-heavy elements Original Research Article

590

Influence of microscopically distributed inhomogeneity and anisotropy of grains on high-temperature crack propagation properties of directionally solidified superalloy

591

Influence of microshot peening on surface layer characteristics of structural steel

592

Influence of microstructural barriers on small fatigue crack growth in mild steel

593

Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy

594

Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet

595

Influence of microstructural features on the impact toughness of infiltrated Al2O3|P-steel composites

596

Influence of microstructural features on water, ion diffusion and transport in clay soils

597

Influence of microstructural inhomogeneities on the fracture toughness of modified 9Cr–1Mo steel at 298–823 K

598

Influence of microstructural inhomogeneity of individual sides of Fe81Si4B13C2 amorphous alloy ribbon on thermally induced structural transformations

599

Influence of microstructural parameters on mechanical behavior of polymer gels

600

Influence of microstructural parameters on strain localization in uniaxial tension

601

Influence of microstructural stability on the creep mechanism of Al–7 wt% Si alloy processed by equal channel angular pressing

602

Influence of microstructure and architecture on oxygen permeation of La(1−X)SrXFe(1−Y)(Ga, Ni)YO3−δ perovskite catalytic membrane reactor

603

Influence of microstructure and chemical composition on proton exchange membrane properties of sulfonated–fluorinated, hydrophilic–hydrophobic multiblock copolymers

604

Influence of microstructure and chemistry on the fracture toughness of dental ceramics

605

Influence of microstructure and crystallographic phases on the tribological properties of SiC obtained by spark plasma sintering

606

Influence of microstructure and deformation behavior on toughening of reactively compatibilized polyamide 6 and poly(ethylene-co-butyl acrylate) blends

607

Influence of microstructure and experimental parameters on the erosion–corrosion behavior of Al alloy composites

608

Influence of microstructure and its evolution on the mechanical behavior of modified MAR-M247 fine-grain superalloys at 871 °C

609

Influence of microstructure and load ratio on cyclic fatigue and final fracture behavior of two high strength steels

610

Influence of microstructure and microdefects on long-term fatigue behavior of a Cr–Mo–V steel

611

Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite

612

Influence of microstructure and semi-crystalline morphology on the β and γ mechanical relaxations of the metallocene isotactic polypropylene

613

Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys

614

Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys

615

Influence of microstructure and strain rate on adiabatic shearing behavior in Ti–6Al–4V alloys

616

Influence of microstructure and surface defect on very high cycle fatigue properties of clean spring steel

617

Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti–6Al–4V

618

Influence of microstructure and texture on the formability character of industrially produced galvannealed coatings on three interstitial free steels

619

Influence of microstructure and turning inserts on machinability and surface characteristics of Al–7Si and Al–7Si–2.5Cu cast alloys

620

Influence of microstructure evolution on mechanical strength of blown poly(ethylene terephthalate)

621

Influence of microstructure evolution on mechanical strength of blown poly(ethylene terephthalate)

622

Influence of microstructure of (α+β) Ti-6.2.4.6 alloy on high-cycle fatigue and tensile test behaviour

623

Influence of microstructure of concrete on size/scale effects in tensile fracture

624

Influence of microstructure of HC CoCrMo biomedical alloys on the corrosion and wear behaviour in simulated body fluids

625

Influence of microstructure of tungsten on solid state reaction rate with amorphous carbon film

626

Influence of microstructure on adiabatic shear localization of pre-twisted tungsten heavy alloys

627

Influence of microstructure on corrosion behavior of Ti–5%Ta–1.8%Nb alloy

628

Influence of microstructure on deformation behavior and fracture mode of Al–Mg–Si alloys

629

Influence of microstructure on electrical properties in BaZr0.5In0.5O3 − δ proton conductor

630

Influence of microstructure on erosion resistance of steels

631

Influence of microstructure on fracture toughness distribution in ceramic–metal functionally graded materials

632

Influence of microstructure on impact and wear behaviour of sintered Cr and Mo steel

633

Influence of microstructure on impact and wear behaviour of sintered Cr and Mo steel

634

Influence of microstructure on impact properties of 9–18%Cr ODS steels for fusion/fission applications

635

Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700 °C

636

Influence of microstructure on magnetic and mechanical behavior in amorphous and nanocrystalline Fe73.5Nb4.5Cr5Cu1B16 alloy

637

Influence of microstructure on magnetic and mechanical behavior in amorphous and nanocrystalline Fe73.5Nb4.5Cr5Cu1B16 alloy

638

Influence of microstructure on mechanical properties of molybdenum alloyed P/M steels

639

Influence of microstructure on mechanical properties of molybdenum alloyed P/M steels

640

Influence of microstructure on micro-/nano-mechanical measurements of select model transparent poly(urethane urea) elastomers

641

Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre- and post-reduced conditions

642

Influence of microstructure on quasi-static and dynamic mechanical properties of bismuth-containing lead-free solder alloys

643

Influence of microstructure on slurry erosive wear characteristics of laser surface alloyed 13Cr–4Ni steel

644

Influence of microstructure on strain-controlled fatigue and fracture behavior of ultra high strength alloy steel AerMet 100

645

Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60

646

Influence of microstructure on the corrosion behavior of nitrocarburized AISI H13 tool steel obtained by pulsed DC plasma

647

Influence of microstructure on the corrosion resistance of AISI type 304L and type 316L sintered stainless steels exposed to ferric chloride solution

648

Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S31803

649

Influence of microstructure on the crack propagation and corrosion resistance of Al–Zn–Mg–Cu alloy 7150

650

Influence of microstructure on the electrical properties of NASICON materials

651

Influence of microstructure on the electrochemical performance of LiMn2−y−zLiyNizO4 spinel cathodes in rechargeable lithium batteries

652

Influence of microstructure on the erosion and erosion–corrosion characteristics of 316 stainless steel

653

Influence of microstructure on the erosive wear behaviour of Ca α-sialon materials

654

Influence of microstructure on the hydrogen permeation of alumina coatings

655

Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte

656

Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte

657

Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte

658

Influence of microstructure on the properties of Sr0.5Pb0.5TiO3 V-shaped PTCR

659

Influence of microstructure on the sliding wear behavior of nitrocarburized tool steels

660

Influence of microstructure on the wear mechanism of multilayered Ni coating deposited by ultrasound-assisted electrodeposition

661

Influence of microstructure on tribologically mixed layers

662

Influence of microstructure on wear behaviour of uncoated WC tools in turning of Alloy 718 and Waspaloy

663

Influence of microstructures and particle concentrations on the development of extrusion textures in metal matrix composites

664

Influence of microstructures and particle concentrations on the development of extrusion textures in metal matrix composites

665

Influence of micro-structures on bending properties of braided laminated composites

666

Influence of microstructures on exchange bias behaviors of La0.7Sr0.3MnO3/La0.33Ca0.67MnO3 bilayers

667

Influence of microstructures on fatigue damage mechanisms in Ti-15-3 alloy

668

Influence of microstructures on temperature distributions for some mixed problem of composite half-space

669

Influence of microtopography, ridge geometry and rainfall intensity on soil erosion induced by contouring failure

670

Influence of Microvesicles in Breast Cancer Metastasis and their Therapeutic Implications

671

Influence of microwave annealing on GMI response and magnetization of an amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon

672

Influence of microwave application on convective drying: Effects on drying kinetics, and optical and mechanical properties of apple and strawberry Original Research Article

673

Influence of microwave heating on fluoride, chloride, nitrate and sulfate concentrations in water

674

Influence of microwave heating on the processing and dissolution behaviour of low-grade complex sulphide ores

675

Influence of microwave irradiation in the cyclohexane oxidation catalyzed by Fe(III) complexes

676

Influence of microwave irradiation on lipid oxidation and acceptance in peanut (Arachis hypogaea L.) seeds

677

Influence of microwave irradiation on the intraparticle diffusion of an insulin variant in reversed-phase liquid chromatography under linear conditions

678

Influence of microwave plasma pre-treatments of TiO2 electrodes on dye-sensitised solar cell efficiencies

679

Influence of microwave plasma treatment on the wettability and the adhesive properties of polyamides films with an epoxy resin

680

Influence of microwave plasma treatment on the wettability and the adhesive properties of polyamides films with an epoxy resin

681

Influence of microwave power, metal oxides and metal salts on the pyrolysis of algae

682

Influence of microwave pre-treatment on sludge solubilization and pilot scale semi-continuous anaerobic digestion

683

Influence of microwave pretreatment on the bioleaching behaviour of low-grade complex sulphide ores

684

Influence of microwave process on photoluminescence of europium-doped strontium aluminate phosphor prepared by a novel sol–gel-microwave process

685

Influence of microwave technology on cocarboxylase hydrochloride particle diversity and drying efficiency

686

Influence of microwave treatment on surface roughness, hydrophobicity, and chemical composition of galena

687

Influence of microwave-assisted calcination on structural properties and oxide-ion performance of layered-perovskite γ-BIMNVOX solid electrolyte synthesized by ethylene glycol–citrate sol–gel route

688

Influence of migration distance, maturity and facies on the stable isotopic composition of alkanes and on carbazole distributions in oils and source rocks of the Alpine Foreland Basin of Austria

689

Influence of MII/MIII ratio in surface-charging behavior of Zn–Al layered double hydroxides

690

Influence of mild alkaline treatment on the cellulosic surfaces active sites

691

Influence of mild and severe wear condition in the formation and stability of friction film in clutch system

692

Influence of military land uses on soil carbon dynamics in forest ecosystems of Georgia, USA

693

Influence of milk centrifugation, brining and ripening conditions in preventing gas formation by Clostridium spp. in Gouda cheese

694

Influence of milk fat presence on the determination of trans fatty acids in fats used for infant formulae Original Research Article

695

INFLUENCE OF MILK ON THE CONTENT AND CHANGES OF MILK FAT DURING PRODUCTION OF SJENIČKI WHITE CHEESE

696

INFLUENCE OF MILK ON THE CONTENT AND TOTAL PROTEIN CHANGES DURING RIPENING WHITE CHEESE IN INDUSTRIAL PRODUCTION

697

Influence of milk proteins on the pasting behaviour and microstructural characteristics of waxy maize starch

698

Influence of milking and restricted suckling regimes on milk production and calf growth in temperate and tropical environments

699

Influence of Milking Frequency on Mammary Gland Dynamics

700

Influence of milking frequency on withdrawal period after application of β-lactam antibiotic-based drugs Original Research Article

701

Influence of mill additives on vitreous enamel properties

702

Influence of milling conditions on the FeAl intermetallic formation by mechanical alloying

703

Influence of milling conditions on the FeAl intermetallic formation by mechanical alloying

704

Influence of milling conditions on the wear resistance of mechanically alloyed aluminium

705

Influence of milling container internal geometry on the mechanical alloying process of the Fe75Si15B10 system

706

Influence of milling media on the microstructure and mechanical properties of mechanically milled and sintered aluminium

707

Influence of milling parameters on the manufacturing of Fe–TiCN composite powders

708

Influence of milling temperature and atmosphere on the synthesis of iron nitrides by ball milling

709

Influence of milling temperature and atmosphere on the synthesis of iron nitrides by ball milling

710

Influence of milling time in solid-state synthesis on structure, morphology and electrochemical properties of Li4Ti5O12 of spinel structure

711

Influence of milling time on mechanically assisted synthesis of Pb0.91Ca0.1TiO3 powders

712

Influence of Milling Time on Physical Properties and Proximate Chemical Composition of Some Egyption Rice Cultivars

713

Influence of milling time on the processing of Fe–TiCN composites

714

Influence of milling time on the synthesis, microstructure and mechanical properties of ZrB2SiCZrO2f ceramic composites

715

Influence of milling, sonication and fluoride doping of pseudoboehmites on their phase transformation behaviour to corundum

716

Influence of millipedes on litter decomposition, N mineralization, and microbial communities in a coastal forest in British Columbia, Canada

717

Influence of milrinone and norepinephrine on blood flow in canine internal mammary artery grafts

718

Influence of minced pork and rind ratios on physico-chemical and sensory quality of Nham – a Thai fermented pork sausage

719

Influence of minced pork and rind ratios on physico-chemical and sensory quality of Nham – a Thai fermented pork sausage

720

Influence of mineral additions on the performance of 100% recycled aggregate concrete

721

Influence of mineral admixtures on compressive strength, gas permeability and carbonation of high performance concrete

722

Influence of mineral admixtures on thermal conductivity and compressive strength of mortar

723

Influence of mineral and organic fertilizers on yield and nitrogen efficiency of winter wheat

724

Influence of mineral dust mixing-state and reaction probabilities on size-resolved sulfate formation in Northeast Asia

725

Influence of mineral dust transport on the chemical composition and physical properties of the Eastern Mediterranean aerosol

726

Influence of mineral impurities on the properties of kaolin and its thermally treated products

727

Influence of mineral matter in coal on decomposition of NO over coal chars and emission of NO during char combustion☆

728

Influence of mineral matter on pyrolysis of palm oil wastes

729

Influence of mineral particle size and choice of suitable parameters for ore sorting using near infrared sensors

730

Influence of mineral precipitation and dissolution on hydrologic properties of porous media in static and dynamic systems

731

Influence of mineral soil on the palatability of organic matter for lumbricid earthworms: A simple food preference study

732

Influence of mineral supplementation on 2,3-dihydroxypyridine toxicity in Angora goats

733

Influence of mineral transformation on the reactivity evolution during rice straw char–NO reaction

734

Influence of mineralogical composition of applied ball clays on properties of porcelain tiles

735

Influence of mineralogical composition on the properties of lightweight aggregate

736

Influence of mineralogy and firing temperature on the porosity of bricks

737

Influence of mineralogy and ore texture on pentlandite flotation at the Nkomati nickel mine, South Africa

738

Influence of mineralogy on the hydraulic properties of ladle slag

739

Influence of Minerals on the Aetiology of Geophagia in Periurban Dairy Cattle in the Derived Savannah of Nigeria

740

Influence of minerals on valerenic acid accumulation in hairy root cultures of Valeriana officinalis L.

741

Influence of minimally processed grapes washing with lemon essential oil

742

Influence of minimum element size to determine crack closure stress by the finite element method

743

Influence of Minimum Processing Procedures on the Quality of Sweet Cassava

744

Influence of mining rent on the efficiency of using natural potential: the paradox of plenty and its Russian specifics

745

Influence of minor addition of boron on tensile and fatigue properties of wrought Ti–6Al–4V alloy

746

Influence of minor addition of Pd, Ag or Au on the microstructural evolution of mechanically alloyed Zr–Ni alloys

747

INFLUENCE OF MINOR ADDITIONS OF NITROGEN AND TITANIUM ON THE CARBIDE MORPHOLOGY AND TRANSFORMATIONS IN CHROMIUM CAST IRONS

748

INFLUENCE OF MINOR ADDITIONS OF NITROGEN AND TITANIUM ON THE CARBIDE MORPHOLOGY AND TRANSFORMATIONS IN CHROMIUM CAST IRONS

749

Influence of minor aluminum concentration changes in zirconium-based bulk metallic glasses on the elastic, anelastic, and plastic properties Original Research Article

750

Influence of minor Si addition on the glass-forming ability and mechanical properties of Pd40Ni40P20 alloy Original Research Article

751

Influence of mischmetal composition on crystallization and mechanical properties of Mg80–Ni10–MM10 alloys

752

Influence of misfit and interfacial binding energy on the shape of the oxide precipitates in metals: ; Interfaces between Mn3O4 precipitates and Pd studied with HRTEM Original Research Article

753

Influence of misleading publications on general practitioners and purchasers

754

Influence of misleading publications on general practitioners and purchasers

755

Influence of mis-match of weld and base material creep properties on elevated temperature design of pressure vessels and piping

756

Influence of mis-match of weld and base material creep properties on elevated temperature design of pressure vessels and piping Original Research Article

757

Influence of mismatch on the addition energy spectra of vertical diatomic artificial molecules

758

Influence of Mississippi alluvial valley rivers on black bear movements and dispersal: implications for Louisiana black bear recovery Original Research Article

759

Influence of Missmatch-Induced Stress and Porosity of Materials on Technological Process

760

Influence of mist-chilling on post-harvest quality of fresh strawberries Cv. Mara des Bois and Gariguette

761

Influence of mitochondrial efficiency on beef lean color stability

762

Influence of mitochondrion-toxic agents on the cardiovascular system

763

Influence of mitral regurgitation on left atrial thrombus and spontaneous echocardiographic contrast in patients with rheumatic mitral valve disease

764

Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation

765

Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars

766

Influence of mix proportions on rheology of cement grouts containing limestone powder

767

Influence of mixed alkali on the spectral properties of vanadyl ions doped xNa2O–(30 − x)K2O–60B2O3 glasses—an EPR and optical study

768

Influence of Mixed Grain Size Distributions on the Toughness in High and Extra High Strength Steels

769

Influence of mixed layer of proteins and phospholipids on the unique film formation behavior of Hevea natural rubber latex

770

Influence of mixed liquor properties and aeration intensity on membrane fouling in a submerged membrane bioreactor at high mixed liquor suspended solids concentrations

771

Influence of mixed liquor recycle ratio and dissolved oxygen on performance of pre-denitrification submerged membrane bioreactors

772

Influence of mixed mode I/III loading on dynamic fracture toughness of mild steel at room and low temperatures

773

Influence of mixed recycled aggregate on the physical – mechanical properties of recycled concrete

774

Influence of mixed reductants on the growth rate of WF6-based W-CVD

775

Influence of mixed soft segments on microphase separation of polyurea elastomers

776

Influence of mixing and ultrasound frequency on antisolvent crystallisation of sodium chloride

777

Influence of mixing and ultrasound frequency on antisolvent crystallisation of sodium chloride

778

Influence of mixing characteristics for water encapsulation by self-assembling hydrophobic silica nanoparticles

779

Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds

780

Influence of mixing layer thickness on the stability characteristics of a supersonic jet

781

Influence of mixing on mullite formation in porcelain

782

Influence of mixing on the quality of iron precipitates in zinc-rich solutions

783

Influence of mixing proportion on the solid-state anaerobic co-digestion of distillerʹs grains and food waste

784

Influence of mixing sequence and superplasticiser dosage on the rheological response of cement pastes at different temperatures

785

Influence of mixing techniques on properties of high performance concrete

786

Influence of mixing techniques on the physical properties of acrylic bone cement

787

Influence of mixing, oxygen and residence time on the SNCR process

788

Influence of mixture non-uniformity on the performance of an effervescent nozzle

789

Influence of MK on the reaction kinetics in MK/lime and MK-blended cement systems at 20°C

790

Influence of MLC901 Alone and with Moderate Exercise on Pain Response Concurrent Due to Stress of Male Mice

791

Influence of MLSS Concentration and Aspergillus niger on Microbial Fuel Cell Performance and Wastewater Treatment Efficiency

792

Influence of Mn addition on microstructure and phase formation of spray-deposited Al–25Si–xFe–yMn alloy

793

Influence of Mn Content and Hot Deformation on Transformation Behavior of C-Mn Steels Original Research Article

794

Influence of Mn content on mechanical properties and fatigue behavior of extruded Mg alloys

795

Influence of Mn content on the structural and electrochemical properties of the La0.7Mg0.3Ni4.25−xCo0.75Mnx hydrogen storage alloys

796

Influence of Mn content on the structural and electrochemical properties of the La0.7Mg0.3Ni4.25−xCo0.75Mnx hydrogen storage alloys

797

Influence of Mn doping on microstructure and DC-accelerated aging behaviors of ZnO–V2O5-based varistors

798

Influence of Mn doping on the performance of CuO-CeO2 catalysts for selective oxidation of CO in hydrogen-rich streams Original Research Article

799

Influence of Mn ions concentration on optical and magnetic properties of Mn-doped ZnS nanowires

800

Influence of Mn on phase structures and electrochemical properties of V3TiNi0.56Hf0.24 alloy

801

Influence of Mn or Mn plus Fe on the hydrogen storage properties of the Ti-Cr-V alloy

802

Influence of Mn solute content on grain size reduction and improved strength in mechanically alloyed Al–Mn alloys

803

Influence of Mn(III)porphyrins with different polarities on dimyristoylphosphatidic acid monolayers

804

Influence of Mn2+ doping level on conductivity of (NH4)3H(SO4)2 superprotonic conductor

805

Influence of Mn2+ on the electrical properties of textured KNN thick films

806

Influence of Mn-doping on phase transition characteristics and relaxor behaviour of lead lanthanum zirconate titanate ceramics

807

Influence of MnO and TiO2 additives on density, microstructure and mechanical properties of Al2O3

808

Influence of MnO2 and Co3O4 dopants on dielectric properties of Pb(Fe2/3W1/3)O3 ceramics

809

Influence of MnO2 modification methods on the catalytic performance of CuO/CeO2 for NO reduction by CO

810

Influence of Mn-site doped with Ru on the high-temperature thermoelectric performance of CaMnO3−δ

811

Influence of Mo content on microstructure and mechanical properties of high strength pipeline steel

812

Influence of mobile phase acid–base equilibria on the chromatographic behaviour of protolytic compounds

813

Influence of mobile phase composition and cross-linking density on the enantiomeric recognition properties of molecularly imprinted polymers

814

Influence of mobile phase composition and thermodynamics on the normal phase chromatography of echinocandins

815

Influence of mobile phase composition on electroosmotic flow velocity, solute retention and column efficiency in open-tubular reversed-phase capillary electrochromatography

816

Influence of mobile phase composition on surface diffusion in reversed-phase liquid chromatography

817

Influence of mobile space charges on electrical properties of ferroelectric Bi3.5La0.5Ti3O12 thin films

818

Influence of modafinil on somatosensory input processing in the human brain-stem

819

Influence of Mode of Operation of the SSSC on the Small Disturbance and Transient Stability of a Radial Power System

820

Influence of Mode of Stress and Coronary Risk Factor Burden Upon Long-Term Mortality Following Normal Stress Myocardial Perfusion Single-Photon Emission Computed Tomographic Imaging

821

Influence of model based iterative reconstruction algorithm on image quality of multiplanar reformations in reduced dose chest CT

822

Influence of model geometrical fitting and turbulence parameterization on phytoplankton simulation in the Gulf of Maine

823

Influence of model mangrove trees on the hydrodynamics in a flume

824

Influence of model selection on the predicted distribution of the seagrass Zostera marina

825

Influence of modeling assumptions on the seismic response of multi-span simply supported steel girder bridges in moderate seismic zones

826

Influence of modeling material on undercut slope failure mechanism

827

Influence of modeling parameters on the response of degrading systems to near-field ground motions

828

Influence of modelling and scenario uncertainties on the numerical simulation of a semi-industrial flameless furnace

829

Influence of modelling and solution methods on the FE-simulation of the post-buckling behaviour of stiffened aircraft fuselage panels

830

Influence of modelling on calculated sea loads on ships

831

Influence of Moderate and Severe Exercise on Memory Formation and Anxiety-like Behaviors in Male Wistar Rat

832

Influence of moderate electric fields on gelation of whey protein isolate

833

Influence of moderate Joule heating on electroosmotic flow velocity, retention, and efficiency in capillary electrochromatography

834

Influence of moderately elevated temperatures on engineering properties of concrete used for nuclear reactor vaults

835

Influence of modifiable risk factors on the incidence of stillbirth/perinatal mortality in dairy cattle

836

Influence of modification by N-2-(aminoethyl)-3-aminopropyltrimethoxysilane on physicochemical properties of bentonite Original Research Article

837

Influence of modified atmosphere and preservatives on the growth of Zygosaccharomyces rouxii isolated from dried fruits

838

Influence of modified atmosphere packaging and storage temperature on the sensory and microbiological quality of fresh peeled white asparagus

839

Influence of modified atmosphere packaging on the chilled shelf life of gutted farmed bass (Dicentrarchus labrax) Original Research Article

840

Influence of modified atmospheric storage, lactic acid, and NaCl on survival of sublethally heat-injured Listeria monocytogenes

841

Influence of modified blanching treatments on inactivation of Salmonella during drying and storage of carrot slices Original Research Article

842

INFLUENCE OF MODIFIED LEVELS OF PLASMA MAGNESIUM, Cu, Zn AND Iron LEVELS ON THIOLS AND PROTEIN STATUS IN DIABETES MELLITUS AND DIABETIC RETINOPATHY

843

Influence of modified lignosulfonate GCL4-1 with different molecular weight on the stability of dimethomorph water based suspension

844

Influence of modified phenolic resins on the fade and recovery behavior of friction materials

845

Influence of modified polyester on the material properties of collagen-based biocomposites and in vitro evaluation of cytocompatibility

846

Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 718

847

Influence of modified soils on the removal of diesel fuel oil from water and the growth of oil degradation micro-organism

848

Influence of modified starches on properties of gluten-free dough and bread. Part I: Rheological and thermal properties of gluten-free dough

849

Influence of modified starches on properties of gluten-free dough and bread. Part II: Quality and staling of gluten-free bread

850

Influence of modifier oxide on dielectric dispersion and a.c. conduction phenomena of Li2O–Sb2O3–GeO2 glass system

851

Influence of modifier oxide on spectroscopic and thermoluminescence characteristics of Sm3+ ion in antimony borate glass system

852

Influence of modifier oxides on some physical properties of antimony borate glass system doped with V2O5

853

Influence of modifier oxides on spectroscopic properties of Sm3+ doped lithium fluoroborate glass

854

Influence of modifiers on the performance of Ru-supported catalysts on the stereoselective hydrogenation of 4-acetamidophenol

855

Influence of Modifiers on the Physicomechanical Properties of Sawdust-Polyethylene Composites

856

Influence of modifying additives on the electronic state of supported palladium

857

INFLUENCE OF MO-DOPING ON VPO CATALYST FOR PARTIAL OXIDATION OF ETHANE

858

Influence of modulated structures on ordering dynamics in CuAu

859

Influence of Modulated Vacuum Cooling on the Cooling Rate, Mass Loss and Vase Life of Cut Lily Flowers

860

Influence of modulator chirp in assessing the performance implications of the group delay ripple of dispersion compensating fiber Bragg gratings

861

Influence of module design and membrane compressibility on VMD performance

862

Influence of moist combustion gas on performance of a sub-critical turbine

863

Influence of moisture conditioning of recycled aggregates on the properties of fresh and hardened concrete

864

Influence of moisture content and cultivation duration on Clostridium thermocellum 27405 end-product formation in solid substrate cultivation on Avicel

865

Influence of moisture content on inactivation of Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium in powdered red and black pepper spices by radio-frequency heating

866

Influence of moisture content on the degradation of waxy and normal corn starches acid-treated in methanol

867

Influence of moisture content on the direct gasification of dewatered sludge via supercritical water

868

Influence of moisture content on the thermal and mechanical properties and curing behavior of polymeric matrix and polymer concrete composite

869

Influence of moisture content on thermophysical properties of enzyme clarified sapota (Achras sapota L.) juice

870

Influence of Moisture on CO2 Separation from Gas Mixture by a Nanoporous Adsorbent Based on Polyethylenimine-Modified Molecular Sieve MCM-41

871

Influence of moisture on functional properties of climbing ropes

872

Influence of moisture on stress–strain behaviour of adhesives used for structural bonding of wood

873

INFLUENCE OF MOISTURE ON THE ACTIVITY OF PERIONYX EXCAVATUS (PERRIER) AND MICROBIAL–NUTRIENT DYNAMICS OF PRESSMUD VERMICOMPOST

874

Influence of moisture on the entrainment of sand by wind

875

Influence of moisture on the mechanical behavior of a natural composite

876

Influence of moisture on the photochemically induced polymerisation of epoxy groups in different chemical environment

877

Influence of Moisture on the Structure and Properties of the Interphase Layer of a Composite Based on an Epoxy Binder with a Disperse Filler

878

Influence of moisture on wettability and sizing properties of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet

879

Influence of moisture present during polymerisation on the properties of a photocured epoxy resin

880

Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete

881

Influence of moisture stress and growth substances on germination and seedling growth of wheat (Triticum aestivum L.)

882

Influence of moisture-induced stress on in situ fiber strength degradation of unidirectional polymer composite

883

Influence of molar mass and temperature on the dynamics of network formation in polycarbonate/carbon nanotubes composites in oscillatory shear flows

884

Influence of molar ratio of citric acid to metal ions on preparation of La0.67Sr0.33MnO3 materials via polymerizable complex process

885

Influence of molar ratio on Pd–Pt catalysts for methane combustion

886

Influence of molar ratios on properties of magnesium oxychloride cement

887

Influence of molar support loss on stress and strain in premolar periodontium: A patient-specific FEM study

888

Influence of molar support loss on stress and strain in premolar periodontium: A patient-specific FEM study

889

Influence of Mold Preheating and Silicon Content on Microstructure and Casting Properties of Ductile Iron in Permanent Mold Original Research Article

890

Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites

891

Influence of molding process on mechanical properties of sandstone cemented by microbe cement

892

Influence of mole ratio of Si: C on the magnetic property of undoped and vanadium carbide doped 3C-SiC

893

Influence of molecular and supramolecular factors on sensor properties of Langmuir–Blodgett films of tert-butyl-substituted copper azaporphyrines towards hydrocarbons

894

Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc–C60 heterojunctions

895

Influence of molecular architecture and melt rheological characteristic on the optical properties of LDPE blown films

896

Influence of molecular architecture of polyether-co-polyester dendrimers on the encapsulation and release of methotrexate

897

Influence of molecular architecture on morphology and micromechanical behavior of styrene/butadiene block copolymer systems

898

Influence of molecular architecture on the isothermal time-dependent response of amorphous shape memory polyurethanes

899

Influence of molecular character of chitosan on the adsorption of chitosan to oil droplet interfaces in an in vitro digestion model

900

Influence of molecular characteristics on overall isothermal melt-crystallization behavior and equilibrium melting temperature of syndiotactic polypropylene

901

Influence of molecular composition on the development of microstructure from sheared polyethylene melts: Molecular and lamellar templating

902

Influence of molecular conformation on organic/metal interface energetics

903

Influence of molecular dipole on monoacrylate monomer reactivity

904

Influence of molecular exchange on the enclosed water volume fraction of W/O/W double emulsions as determined by low-resolution NMR diffusometry and T2-relaxometry

905

Influence of molecular hydrogen on acetylene pyrolysis: Experiment and modeling

906

Influence of Molecular Mobility on Contrast Efficiency of Branched Polyethylene Glycol Contrast Agent

907

Influence of molecular orientation on the photovoltaic properties of octithiophene

908

Influence of molecular parameters and processing conditions on degradation of hydrogenated nitrile butadiene rubbers

909

Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part I. Stress–strain behavior

910

Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part II. Strain recovery

911

Influence of Molecular Precursor Structure on the Crystallinity of Boron Nitride

912

Influence of molecular rigidity on interfacial ordering in diphenyl-based polysiloxane films

913

Influence of molecular shape on the retention of small molecules by solvent resistant nanofiltration (SRNF) membranes: A suitable molecular size parameter

914

Influence of molecular structural characteristics on pasting and thermal properties of acid-methanol-treated rice starches

915

Influence of molecular structure imaged with atomic force microscopy on the rheological behavior of carrageenan aqueous systems in the presence or absence of cations

916

Influence of molecular structure on the properties of confined fluids by molecular dynamics simulation

917

Influence of molecular structures of europium bisphthalocyanines on organization of supramolecular assemblies formed at the air/water interface

918

Influence of molecular vibrations on dissociative adsorption

919

Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4′-diphenylmethane diisocyanate

920

Influence of molecular weight and degree of substitution of carboxymethylcellulose on the stability of acidified milk drinks

921

Influence of molecular weight and free NCO content on the rheological properties of lithium lubricating greases modified with NCO-terminated prepolymers

922

Influence of molecular weight and tacticity on thermal stabilities of hydroquinone promoted CT polymerization of styrene and alkylmethacrylates

923

Influence of molecular weight of polymer matrix on the structure and rheological properties of graphene oxide/polydimethylsiloxane composites

924

Influence of molecular weight of polymethyl(methacrylate) beads on the properties and structure of cross-linked denture base polymer

925

Influence of molecular weight on dynamic crossover temperature in linear polymers

926

Influence of molecular weight on enthalpy relaxation and fragility of amorphous carbohydrates

927

Influence of molecular weight on performance properties of polyethersulphone and its composites with carbon fabric

928

Influence of molecular weight on silole-containing cyclopentadithiophene polymer and its impact on the electrochromic properties

929

Influence of molecular weight on the fracture properties of aliphatic polyketone terpolymers

930

Influence of molecular–substrate interaction on the self-assembly of discotic liquid crystals

931

Influence of Molten Salt on Luminescent Intensity and Particle Size of Y2 O3 :Eu3+ Phosphor

932

Influence of molten-state annealing on the phase structure and crystallization behaviour of high impact polypropylene copolymer

933

Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification

934

Influence of molybdenum composition in chromium oxide-based coatings on their tribological behavior

935

Influence of molybdenum content on the microstructure of spark plasma sintered titanium alloys

936

Influence of molybdenum content on transformation behavior of high performance bridge steel during continuous cooling

937

Influence of molybdenum disilicide filler on carbon–carbon composites Original Research Article

938

Influence of molybdenum ion implantation on the aqueous corrosion behavior of zircaloy-4

939

Influence of molybdenum ion implantation on the aqueous corrosion behavior of zirconium

940

Influence of molybdenum ions on spectroscopic and dielectric properties of ZnF2–Bi2O3–P2O5 glass ceramics

941

Influence of molybdenum ions on the structure of ZnO–As2O3–Sb2O3 glass system by means of spectroscopic and dielectric studies

942

Influence of molybdenum on properties of Zn–Ni and Zn–Co alloy coatings

943

Influence of molybdenum on the microstructure and properties of a FeCrBSi alloy coating deposited by plasma transferred arc hardfacing

944

Influence of molybdenum on the microstructure and wear resistance of nickel-based alloy coating obtained by plasma transferred arc process

945

Influence of molybdenum on the stability of iron oxide materials for hydrogen production with cyclic water gas shift process

946

Influence of molybdenum particles on thermal shock resistance of alumina matrix ceramics

947

Influence of molybdenum particles on thermal shock resistance of alumina matrix ceramics

948

Influence of molybdenum particles on thermal shock resistance of alumina matrix ceramics

949

Influence of molybdenum source/drain electrode contact resistance in amorphous zinc–tin-oxide (a-ZTO) thin film transistors

950

Influence of momentum-dependent interactions on balance energy and mass dependence⋆

951

Influence of monensin and lauric acid distillate or palm oil on in vitro fermentation kinetics and metabolites produced using forage and high concentrate substrates

952

Influence of monitor passband width on the layer thickness determination during deposition of a dense-wavelength-divisionmultiplexing filter

953

Influence of monochlorophenols on methanogenic activity in granular sludge

954

Influence of monolayer of titanium and zirconium coupling agents on dispersive and acid–base properties of modified silica gel

955

Influence of monomer concentrations on the performance of polyamide-based thin film composite forward osmosis membranes

956

Influence of monovalent electrolytes on the electrochemical studies of newly synthesized thermally stable inorganic–organic nanocomposite membrane Original Research Article

957

Influence of Monsoon on the Distribution of Organic Carbon in Inner Continental Shelf Core Sediments, South China Sea, Malaysia

958

Influence of montmorillonite and film processing conditions on the morphology of polyamide 6: Effect on ethanol and toluene barrier properties

959

Influence of montmorillonite clay on the thermal and mechanical properties of conventional carbon fiber reinforced composites

960

Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films

961

Influence of montmorillonite on cadmium accumulation in carp, Carassius auratus

962

Influence of montmorillonites exchange capacity on the basal spacing of cation–anion organo-montmorillonites

963

Influence of Moringa oleifera Leaf Extracts on Germination and Seedling Survival of Three Common Legumes

964

Influence of Morphemic Analysis on Vocabulary Learning Among Palestinian 10th Graders

965

Influence of morphine sulfate on cocaine-induced coronary vasoconstriction

966

Influence of morphodynamic and hydroclimatic factors on the macrofauna of Moroccan sandy beaches

967

Influence of morphodynamic variability over seasonal beach sediments and its probable effect on coastal development

968

Influence of morpholine on changes in kidney tissue and white blood cells of NMRI male Albino mice [Edit] [Profile]

969

Influence of morphological characteristics of heterogeneous moraine formations on their mechanical behaviour using image and statistical analysis

970

Influence of Morphological Characteristics on Physical and Physiological Performances of Tunisian Elite Male Handball Players

971

Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

972

Influence of morphology and structure geometry on NO2 gas-sensing characteristics of SnO2 nanostructures synthesized via a thermal evaporation method

973

Influence of morphology and surface characteristics on the photocatalytic activity of rutile titania nanocrystals

974

Influence of morphology and surface charge on the suitability of palygorskite as drilling fluid

975

Influence of morphology and surface exchange reaction on magnetic properties of monodisperse magnetite nanoparticles

976

Influence of morphology and topography on potentiometric response of magnesium and calcium sensitive PEDOT films doped with adenosine triphosphate (ATP) Original Research Article

977

Influence of morphology and Yb3+ concentration on blue and red luminescence of uniform cube-like Y2O3:Yb3+/Tm3+ particles

978

Influence of morphology of corrosion on fracture initiation in an aluminum alloy

979

Influence of morphology of PVDF capillary membranes on the performance of direct contact membrane distillation

980

Influence of morphology on in vitro compatibility of bioactive glasses

981

Influence of morphology on the properties of segmented block copolymers

982

Influence of morphology on the stability of LiNiO2

983

Influence of mortar rendering on chloride penetration into concrete structures

984

Influence of MoSi2 content on the microstructure and properties of MoSi2–RSiC composites

985

Influence of Mother s Characteristics and Self-Determination on Stunting Toddler Care Behavior Using Partial Least Square Model

986

Influence of motherʹs educational level on food parenting practices and food habits of young children

987

Influence of motion pattern on apical transportation and centering ability of WaveOne single-file technique in curved root canals

988

Influence of Mould and Insulation Design on Soundness of Tool Steel Ingot by Numerical Simulation Original Research Article

989

Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulation

990

Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys

991

Influence of mouse position on muscular activity in the neck, shoulder and arm in computer users

992

Influence of mouth status and water level on the macrophytes in a small temporarily open/closed estuary

993

Influence of MRI abnormality in skull base bone on prognosis of nasopharyngeal carcinoma

994

Influence of MRI acquisition protocols and image intensity normalization methods on texture classification

995

Influence of mRNA Self-Structure on Hybridization: Computational Tools for Antisense Sequence Selection

996

Influence of MSD crack pattern on the residual strength of flat stiffened sheets

997

Influence of MSFC-type dispersant composition on the performance of soluble anhydrite binders

998

Influence of MTBE addition into gasoline on automotive exhaust emissions

999

Influence of MTHFR gene variations on perceived stress modification: Preliminary results of NURSE study

1000

Influence of mucin type on polymer-mucin rheological interactions

بازگشت