ليست عنوان مقالات لاتين Microstructural and optical properties of ZnO thin films grown on InSb (111) substrates Microstructural evolution of buffers

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Microstructural and optical properties of ZnO thin films grown on InSb (111) substrates

2

Microstructural and optical properties of ZnS:Cu nanocrystals prepared by an ion complex transformation method

3

Microstructural and optical studies of multiply stacked CdSe/ZnSe quantum-dot structures with a large ZnSe spacer thickness

4

Microstructural and phase configurational effects determining water content: Dielectric relationships of aggregated porous media

5

Microstructural and phase equilibria study in the Ni–Al–Cr–W system at 1173 and 1273 K

6

Microstructural and phase transformations during sintering of a phillipsite rich zeolitic tuff

7

Microstructural and photo luminescence studies on hydrothermally synthesized Ce-doped barium titanate nanocrystals

8

Microstructural and photocatalytic properties distribution of TiO2 coatings reactively sputtered as a function of the substrate position relatively to the Ti target

9

Microstructural and photocatalytic properties of sol–gel-derived vanadium-doped mesoporous titanium dioxide nanoparticles

10

Microstructural and photocatatlytic properties of Eu-doped mesporous titanium dioxide nanopaticles by sol–gel method

11

Microstructural and photoluminescent characterization of one-dimensional ZnO nanostructures prepared by catalyst-assisted vapour–liquid–solid technique

12

Microstructural and physical properties of silica aerogels based on oil shale ash

13

Microstructural and physical properties of the ambient pressure dried hydrophobic silica aerogels with various solvent mixtures

14

Microstructural and physical properties of titanium nitride coatings produced by CVD process

15

Microstructural and physical properties of titanium nitride coatings produced by CVD process

16

Microstructural and physicochemical properties of heat-moisture treated waxy and normal starches Original Research Article

17

Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition

18

Microstructural and processing factors influencing the formation of annealing twins

19

Microstructural and reliability in grinding of silicon nitride

20

Microstructural and reliability in grinding of silicon nitride

21

Microstructural and reliability in grinding of silicon nitride

22

Micro-structural and rheological characteristics of SBS-asphalt blends during their manufacturing

23

Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials

24

Microstructural and seismic properties of the upper mantle underneath a rifted continental terrane (Baja California): An example of sub-crustal mechanical asthenosphere?

25

Microstructural and spectroscopic study of sol–gel derived Nd-doped silica glasses

26

Microstructural and strength evolutions of geopolymer composite reinforced by resin exposed to elevated temperature

27

Microstructural and surface characterization of Ti–6Al–4V alloys after fretting fatigue

28

Microstructural and surface characterization of Ti–6Al–4V alloys after fretting fatigue

29

Microstructural and surface property variations due to the amorphous region formed by thermal annealing in Al-doped ZnO thin films grown on n-Si (1 0 0) substrates

30

Micro-structural and temperature dependent electrical characterization of Ni/GaN Schottky barrier diodes

31

Microstructural and textural characterization of a hot-rolled IF steel

32

Microstructural and textural characterization of copper processed by ECAE

33

Microstructural and textural development in an extra low carbon steel during warm rolling

34

Microstructural and textural development in an extra low carbon steel during warm rolling

35

Microstructural and textural developments during Zircaloy-4 fuel tube fabrication

36

Microstructural and textural evolution of AZ61 magnesium alloy sheet during bidirectional cyclic bending

37

Microstructural and texture changes in severely deformed aluminum alloys

38

Microstructural and texture development in direct laser fabricated IN718

39

Microstructural and texture studies of gas-nitrided Cr-coated low-alloy high-carbon steel

40

Microstructural and thermal processing effects on adding 1 and 3 w/o Ti to a powder metallurgy processed quaternary Ni–Cr–Fe–Al alloy

41

Microstructural and thermal properties of plasma sprayed mullite coatings

42

Microstructural and thermoanalytical investigations of nano-phase formation in Ti20Zr20Cu60 alloy

43

Microstructural and thermoanalytical investigations of nano-phase formation in Ti20Zr20Cu60 alloy

44

Microstructural and thermo-mechanical analysis of quench cracking during the production of bainitic–martensitic railway wheels

45

Microstructural and thermo-mechanical characterization of carbon/carbon composites

46

Microstructural and thermophysical properties of U–6 wt.%Zr alloy for fast reactor application

47

Microstructural and topographical studies of DC-pulsed plasma nitrided AISI 4140 low-alloy steel

48

Microstructural and transport properties in substituted Bi2Sr2CaCu2O8+δ-modulated compounds

49

Microstructural and tribological characterization of plasma- and gas-nitrided 2Cr13 steel in vacuum

50

Microstructural and tribological comparison of HVOF-sprayed and post-treated M–Mo–Cr–Si (M = Co, Ni) alloy coatings

51

Microstructural and tribological evaluation of potential self-lubricating coatings with additions produced by the plasma transferred arc technique

52

Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing

53

Microstructural and tribological study of Nd:YAG laser treated titanium plates

54

Microstructural and tritium release examination of titanium beryllides

55

Microstructural and vibrational properties of PVT grown Sb2Te3 crystals

56

Microstructural and wear characteristics of HVOF-sprayed nanocrystalline NiAl coating

57

Microstructural anisotropy effect on the mechanical properties of a 14Cr ODS steel

58

Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti–45Al–5Nb–0.2B–0.2C

59

Microstructural approach to understand oil absorption during vacuum and atmospheric frying Original Research Article

60

Microstructural aspects and mechanical properties of friction stir welded AA2024-T3 aluminium alloy sheet

61

Microstructural aspects and positron annihilation study on solid state synthesis of amorphous and nanocrystalline Al60−xTi40Six alloys prepared by mechanical alloying

62

Microstructural aspects of crack nucleation during cyclic loading of AA7075-T651

63

Microstructural aspects of grain growth kinetics in non-oriented electrical steels

64

Microstructural aspects of low cycle fatigued austenitic stainless tube and pipe steels

65

Microstructural aspects of manganese metal during its electrodeposition from sulphate solutions in the presence of quaternary amines

66

Microstructural aspects of oxygen ion conduction in solids

67

Microstructural aspects of plain aluminide and Pt-aluminide coatings on Ti-base alloy IMI-834

68

Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy

69

Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy

70

Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites

71

Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites

72

Microstructural aspects of superplasticity in Ti–6Al–4V alloy

73

Microstructural aspects of surface deformation processes and fracture of tensile strained high isotactic polypropylene

74

Microstructural aspects of surface deformation processes and fracture of tensile strained high isotactic polypropylene

75

Microstructural aspects of the failure analysis of nickel base superalloys components

76

Microstructural aspects of the sintering of thermal barrier coatings

77

Microstructural aspects of the sintering of thermal barrier coatings

78

Microstructural aspects related to pseudoelastic cycling in ultra fine grained Ni–Ti

79

Microstructural aspects upon hydrogen environment embrittlement of various bcc steels

80

Microstructural association between mechanical behavior with bending fracture surfaces in Astaloy CrA sintered parts alloyed by Cu and C

81

Microstructural Behavior and Corrosion Analysis of Lean Duplex Stainless Steel 2101 under the Influence of Variable Heat Inputs Using Gas Tungsten Arc Welding

82

Microstructural behavior of 8Cr-ODS martensitic steels during creep deformation

83

Microstructural behavior of rapidly solidified and extruded Al-14wt%Ni-14wt%Mm (Mm, misch metal) alloy powders

84

Microstructural behavior of rapidly solidified and extruded Al-14wt%Ni-14wt%Mm (Mm, misch metal) alloy powders

85

Microstructural behavior of VVER-440 reactor pressure vessel steels under irradiation to neutron fluences beyond the design operation period

86

Microstructural behavior of water-in-oil emulsions stabilized by fatty acid esters of propylene glycol and zinc fatty acid salts

87

Microstructural behaviour and gelling characteristics of myosystem protein gels interacting with hydrocolloids

88

Microstructural blending of coal to enhance flowability

89

Microstructural change in AlMg3 alloy irradiated by spallation neutrons and high energy protons

90

Microstructural change of 9% Cr-welded joints after long-term creep

91

Microstructural change of a 5% Cr steel weld metal during tempering

92

Microstructural change of a 5% Cr steel weld metal during tempering

93

Microstructural change of a 9Cr steel longitudinal welded tube under internal pressure creep loading

94

Microstructural change of pitch derived carbon matrix in C/C Composite by zone treatment on carbon fiber

95

Microstructural change of potato tissues frozen by ultrasound-assisted immersion freezing Original Research Article

96

Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

97

Microstructural change-induced lowering of hydrogen permeability in eutectic Nb–TiNi alloy

98

Microstructural changes accompanying high strain amplitude fatigue tests on a multiphase medium carbon microalloyed steel

99

Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties

100

Microstructural changes and corrosion resistance of AISI 310S steel exposed to 600–800 °C

101

Microstructural changes and estimated strengthening contributions in a gamma alloy Ti–45Al–5Nb pack-rolled sheet

102

Microstructural changes and evolutions of elastic properties versus temperature of alumina and alumina–magnesia refractory castables

103

Microstructural changes and fracture behavior of CF8M duplex stainless steels after long-term aging Original Research Article

104

Microstructural changes and mechanical properties of Incoloy 800 after 15 years service

105

Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings

106

Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings

107

Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings

108

Microstructural changes caused by carbonation of cement mortar

109

Microstructural changes caused by yttrium addition to NbTi-modified centrifugally cast HP-type stainless steels

110

Microstructural changes due to anodic polarisation of palladium and silver films on YSZ

111

Microstructural changes due to heat-treatment of annealing and their effect on the creep behavior of self-reinforced silicon nitride ceramics

112

Microstructural changes due to heat-treatment of annealing and their effect on the creep behavior of self-reinforced silicon nitride ceramics

113

Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

114

Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

115

Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

116

Microstructural changes during annealing of FePd-based thin films

117

Microstructural changes during creep of an SiC/Al2O3 composite

118

Microstructural changes during creep of an SiC/Al2O3 composite

119

Microstructural changes during osmotic dehydration of parenchymatic pumpkin tissue Original Research Article

120

Microstructural changes during oxidation of titanium alloys

121

Microstructural changes during superplastic deformation of Fe–24Cr–7Ni–3Mo–0.14N duplex stainless steel

122

Microstructural changes during superplastic deformation of Fe–24Cr–7Ni–3Mo–0.14N duplex stainless steel

123

Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steel

124

Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steel

125

Microstructural changes in (K0.5Na0.5)NbO3 ceramics sintered in various atmospheres

126

Microstructural changes in 3Y-TZP induced by scratching and indentation

127

Microstructural changes in a low-activation Fe–Cr–Mn alloy irradiated with 92 MeV Ar ions at 450°C

128

Microstructural changes in a Russian-type reactor weld material after neutron irradiation, post-irradiation annealing and re-irradiation studied by atom probe tomography and positron annihilation spectroscopy Original Research Article

129

Microstructural changes in a single crystal Ni-base superalloy induced by plastic straining

130

Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking

131

Microstructural changes in alloy 625 during high temperature creep

132

Microstructural changes in carbon nanotubes induced by annealing at high pressure Original Research Article

133

Microstructural changes in concretes with sulfate exposure

134

Microstructural changes in equal channel angular pressed low carbon steel by static annealing Original Research Article

135

Microstructural changes in eutectic tin–lead alloy due to severe bending

136

Microstructural changes in eutectic tin–lead alloy due to severe bending

137

Microstructural changes in ground 3Y-TZP and their effect on mechanical properties Original Research Article

138

Microstructural changes in high interstitial stainless austenitic steels due to ballistic impact

139

Microstructural changes in ion implanted titanium nitride

140

Microstructural changes in ion implanted titanium nitride

141

Microstructural changes in m. rectus abdominis bovine muscle after heating

142

Microstructural changes in NiO–ScSZ composite following reduction processes in pure and diluted hydrogen

143

Microstructural changes in oxygen-irradiated zirconium-based alloy characterised by X-ray diffraction techniques

144

Microstructural changes in rabbit meat wrapped with Pteridium aquilinum fern during postmortem storage

145

Microstructural changes in silicon induced by patterning with focused ion beams of Ga, Si and Au

146

Microstructural changes in silicon induced by patterning with focused ion beams of Ga, Si and Au

147

Microstructural changes in sintered Al2O3 by acid treatment of compacts produced by slip casting in gypsum molds

148

Microstructural changes in Teruel dry-cured ham during processing

149

Microstructural changes induced by low energy heavy ion irradiation in titanium silicon carbide

150

Microstructural changes induced by post-irradiation annealing of neutron-irradiated austenitic stainless steels

151

Microstructural changes induced by thermal treatment in Cu47Ti33Zr11Ni8Si1 metallic glass

152

Microstructural Changes Induced by Thermal Treatment of Cobalt(II) Hexacyanoferrate(III) Compound

153

Microstructural changes induced in “stacked cup” carbon nanofibers by heat treatment Original Research Article

154

Microstructural changes induced in Portland cement-based materials due to natural and supercritical carbonation

155

Microstructural changes inside the lamellar structures of alloy ZA27

156

Microstructural changes observed in a rapidly solidified Ni3Al alloy during isothermal treatments

157

Microstructural changes of a CuZnAlMnNi shape memory alloy due to cooling in liquid nitrogen

158

Microstructural changes of a CuZnAlMnNi shape memory alloy due to cooling in liquid nitrogen

159

Microstructural changes of a CuZnAlMnNi shape memory alloy due to cooling in liquid nitrogen

160

Microstructural changes of a thermally aged stainless steel submerged arc weld overlay cladding of nuclear reactor pressure vessels

161

Microstructural changes of aluminized Alloy 617 during high-temperature aging

162

Microstructural changes of austenitic steels caused by proton irradiation under various conditions

163

MICROSTRUCTURAL CHANGES OF IF STEELS DURING HOT STRIP ROLLING

164

Microstructural changes of nanocrystalline nickel during cold rolling Original Research Article

165

Microstructural changes of neutron irradiated ODS ferritic and martensitic steels

166

Microstructural changes of processed vitrified solid waste products

167

Microstructural changes of reference montmorillonites by cationic surfactants

168

Microstructural changes of SiCw/6061Al composite during compression at temperatures below and above the solidus of the matrix alloy

169

Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions

170

Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions

171

Microstructural changes produced by plastic deformation in the UNS S31803 duplex stainless steel

172

Microstructural changes taking place during the thermo-mechanical processing and cold working of steel 18Cr18Mn0.5N

173

Microstructural changes within similar coronary stents produced from two different austenitic steels

174

Microstructural characterisation and behaviour in different salt solutions of sodium polymethacrylate-g-PEO comb copolymers

175

Microstructural characterisation and change in a.c. magnetic susceptibility of duplex stainless steel during spinodal decomposition

176

Microstructural characterisation and constitutive behaviour of alloy RR1000 under fatigue and creep–fatigue loading conditions

177

Microstructural characterisation and mechanical response of laminated Ni-intermetallic composites synthesised using Ni sheets and Al foils

178

Microstructural characterisation and physical properties of cured thermally activated clay-lime blends

179

Microstructural characterisation and properties of thermochemically treated iron-based alloys

180

Microstructural characterisation and stress determination in as-plasma sprayed and incubated bioconductive hydroxyapatite coatings

181

Microstructural characterisation by X-ray scattering of perovskite-type La0.8Sr0.2MnO3±d thin films prepared by a dip-coating process

182

Microstructural characterisation of a Ni-Cr-B-C based alloy coating produced by high velocity oxy-fuel thermal spraying

183

Microstructural characterisation of Al―Hf and Al―Li―Hf spray deposits

184

Microstructural characterisation of alkali-activated PFA matrices for waste immobilisation

185

Microstructural characterisation of an alumina/mullite composite tested in creep

186

Microstructural characterisation of an alumina/mullite composite tested in creep

187

Microstructural Characterisation of As-Cast Binary Near Gamma Titanium Aluminides

188

Microstructural characterisation of battery materials using powder diffraction data: DIFFaX, FAULTS and SH-FullProf approaches

189

Microstructural characterisation of carbon doped CrAlTiN nanoscale multilayer coatings

190

Microstructural characterisation of defect structures in a TiAl-base Ti–47Al–2Nb–2Mn(at.%)+0.8vol.%TiB2 alloy

191

Microstructural characterisation of defect structures in a TiAl-base Ti–47Al–2Nb–2Mn(at.%)+0.8vol.%TiB2 alloy

192

Microstructural characterisation of electrodeposited Co/Pt multilayers

193

Microstructural characterisation of electrodeposited Co/Pt multilayers

194

Microstructural characterisation of fatigue crack growth fracture surfaces of lamellar Ti45Al2Mn2Nb1B

195

Microstructural characterisation of fatigue crack initiation in Al-based plain bearing alloys

196

Microstructural characterisation of five simulated archaeological copper alloys using light microscopy, scanning electron microscopy, energy dispersive X-ray microanalysis and secondary ion mass spectrometry

197

Microstructural characterisation of five simulated archaeological copper alloys using light microscopy, scanning electron microscopy, energy dispersive X-ray microanalysis and secondary ion mass spectrometry Original Research Article

198

Microstructural characterisation of geopolymers synthesised from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM

199

Microstructural characterisation of interpenetrating nickel/alumina composites

200

Microstructural characterisation of material adhered over cutting tool in the dry machining of aerospace aluminium alloys

201

Microstructural characterisation of metal ion implanted silicon nitride

202

Microstructural characterisation of monolithic ceramic matrix composites from polysiloxane and SiC powder

203

Microstructural characterisation of nanocomposite nc-MeC/a-C coatings on oxygen hardened Ti-6Al-4V alloy

204

Microstructural characterisation of nuclear grade graphite

205

Micro-structural characterisation of palm fruit at sterilisation and digestion stages in relation to oil expression Original Research Article

206

Microstructural characterisation of powder metallurgy M35MHV HSS as a function of the processing route

207

Microstructural characterisation of surfactant treated nylon fibres

208

Microstructural characterisation of titanium coatings deposited using cold gas spraying on Al2O3 substrates

209

Microstructural characterisation of vacuum sintered T42 powder metallurgy high-speed steel after heat treatments

210

Microstructural Characteristic of Dissimilar Welded Components (AISI 430 Ferritic-AISI 304 Austenitic Stainless Steels) by CO2 Laser Beam Welding (LBW)

211

Microstructural characteristic of low carbon microalloyed steels produced by thermo-mechanical controlled process

212

Microstructural characteristic of NiTi coating on stainless steel by plasma transferred arc process

213

Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting

214

Microstructural characteristics and corrosion resistance in molten Zn–Al bath of Co–Mo–Cr–Si alloys

215

Microstructural characteristics and crystallization of CaO–P2O5–Na2O–ZnO glass ceramics prepared by sol–gel method

216

Microstructural characteristics and deformation properties in superplastic intermetallics

217

Microstructural characteristics and deformation properties in superplastic intermetallics

218

Microstructural characteristics and electrical properties of xPb(Mg1/3Ta2/3)O3–(0.1 − x)Pb(Mn1/3Sb2/3)O3–0.9Pb(Zr0.52Ti0.48)O3 high power piezoelectric ceramics

219

Microstructural characteristics and embrittlement phenomena in neutron irradiated 309L stainless steel RPV clad

220

Microstructural characteristics and evolution of Ti2AlN/TiAl composites with a network reinforcement architecture during reaction hot pressing process

221

Microstructural characteristics and formation mechanism of Al2O3–13 wt.% TiO2 coatings plasma-sprayed with nanostructured agglomerated powders

222

Microstructural characteristics and formation mechanism of direct laser-sintered Cu-based alloys reinforced with Ni particles

223

Microstructural characteristics and grain growth kinetics of Pr6O11 Doped SnO2-based varistors

224

Microstructural characteristics and impact fracture behavior of a high-strength low-alloy steel treated by intercritical heat treatment

225

Microstructural characteristics and mechanical properties of friction stir welded joints of Ti–6Al–4V titanium alloy

226

Microstructural characteristics and mechanical properties of hypo-eutectic and hyper-eutectic Al–Si alloys in the semi-solid forming process

227

Microstructural characteristics and mechanical properties of in situ synthesized (TiB + TiC)/TC18 composites

228

Microstructural characteristics and mechanical properties of non-combustive Mg–9Al–Zn–Ca magnesium alloy friction stir welded joints

229

Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds

230

Microstructural characteristics and nanomechanical properties across the thickness of the wild-type zebrafish skeletal bone

231

Microstructural characteristics and second-phase particles in yttrium-bearing Fe-10Ni-7Mn martensitic steels

232

Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size

233

Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size

234

Microstructural characteristics and superplastic-like behavior in aluminum powder alloy consolidated by equal-channel angular pressing Original Research Article

235

Microstructural characteristics and texture of hot strip low carbon steel produced by flexible thin slab rolling with warm rolling technology

236

Microstructural characteristics and thermal stability of a NiAl-based near-eutectic alloy fabricated by water-cooled copper mold method

237

Microstructural characteristics and thermal stability of ultrafine grained 6061 Al alloy fabricated by accumulative roll bonding process

238

Microstructural characteristics and thermal stability of ultrafine grained 6061 Al alloy fabricated by accumulative roll bonding process

239

Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel

240

Microstructural characteristics and unique properties obtained by solution treating or aging in β-rich α+β titanium alloy

241

Microstructural characteristics and unique properties obtained by solution treating or aging in β-rich α+β titanium alloy

242

Microstructural characteristics in plasma sprayed functionally graded ZrO2/NiCrAl coatings

243

Microstructural characteristics of (110) InGaAs layers grown by OMVPE

244

Microstructural characteristics of (110) InGaAs layers grown by OMVPE

245

Microstructural characteristics of (Pb1−xCax)TiO3 materials

246

Microstructural characteristics of Al2O3-based refractory containing ZrO2 induced by CO2 laser melting

247

Microstructural characteristics of an ultrafine grain metal processed with equal-channel angular pressing

248

Microstructural characteristics of Au/Al bonded interfaces

249

Microstructural characteristics of cerium oxide conversion coatings obtained by various aqueous deposition methods

250

Microstructural characteristics of forged and heat treated Inconel-718 disks

251

Microstructural characteristics of immersion tin coatings on copper circuitries in circuit boards

252

Microstructural Characteristics of Lao.7Cao.3MnO3 Films and Multilayers

253

Microstructural characteristics of large-scale ultrafine-grained copper

254

Microstructural characteristics of laser clad coatings with rare earth metal elements

255

Microstructural characteristics of mixed III–V epitaxial layers

256

Microstructural characteristics of mixed III–V epitaxial layers

257

Microstructural characteristics of Nd:YAG powders leading to transparent ceramics

258

Microstructural characteristics of nickel processed to ultrahigh strains by high-pressure torsion

259

Microstructural characteristics of post-shear localization in cold-rolled 316L stainless steel Original Research Article

260

Microstructural characteristics of PTA-overlayed NbC on pure Ti

261

Microstructural characteristics of the built up layer of a precipitation hardened nickel based superalloy by electrospark deposition

262

Microstructural characteristics of the Cretaceous Qingshankou Formation shale, Songliao Basin

263

Microstructural characteristics of tungsten-base nanocomposites produced from micropowders by high-pressure torsion Original Research Article

264

Microstructural characteristics of TZP/Ni cermets plastically deformed at high temperature

265

Microstructural characteristics on the surface and subsurface of semimetallic automotive friction materials during braking process

266

Microstructural characteristics with various cooling paths and the mechanism of embrittlement and toughening in low-carbon high performance bridge steel

267

Microstructural characterization and ablation mechanism of TiB2/(Cu,Ni) melt-infiltrated ceramic composite

268

Microstructural characterization and abrasive wear performance of HVOF sprayed Cr3C2–NiCr coating

269

Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles

270

Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal–ceramic restorations

271

Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy

272

Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V

273

Microstructural characterization and crystallization behaviour of (1 − x)TeO2–xWO3 (x = 0.15, 0.25, 0.3 mol) glasses

274

Microstructural characterization and crystallization kinetics of (1 − x)TeO2–xK2O (x = 0.05, 0.10, 0.15, 0.20 mol) glasses

275

Microstructural characterization and crystallization kinetics of (1−x)TeO2–xLiCl (x=0.6–0.4 mol) glasses

276

Microstructural characterization and crystallization of (1 − x)TeO2–xCdF2 (x = 0.10, 0.15, 0.25 mol) glasses

277

Microstructural characterization and crystallization of ZrO2–Y2O3–CuO solid solution powders

278

Microstructural characterization and dry sliding wear resistance of MoO2-strengthened γ/NiMo alloys with different primary phases

279

Microstructural characterization and electrical properties of spray pyrolyzed conventionally sintered or hot-pressed BaZrO3 and BaZr0.9Y0.1O3 − δ

280

Microstructural characterization and electrochemical properties of Ba0.5Sr0.5Co0.8Fe0.2O3−δ and its application for anode of SOEC

281

Microstructural Characterization and Electrochemical Properties of RuO2 Thin Film Electrodes Prepared by Reactive Radio-Frequency Magnetron Sputtering

282

Microstructural characterization and evolution mechanism of adiabatic shear band in a near beta-Ti alloy

283

Microstructural characterization and formation of α′ martensite phase in Ti–6Al–4V alloy butt joints produced by friction stir and gas tungsten arc welding processes

284

Microstructural characterization and fracture behavior of a microhybrid and a nanofill composite

285

Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures

286

Microstructural characterization and grain refinement of AA6082 gas tungsten arc welds by scandium modified fillers

287

Microstructural characterization and hardness evaluation of HVOF sprayed Ni–5Al coatings on Ni- and Fe-based superalloys

288

Microstructural characterization and hydrogenation properties of non-stoichiometric Zr0.9TixV2 alloys

289

Microstructural characterization and impact toughness of a jackup rig rack steel treated by intercritical heat treatment

290

Microstructural characterization and impact toughness of intercritically annealed PM steels

291

Microstructural characterization and in vitro apatite formation in CaO–P2O5–TiO2–MgO–Na2O glass-ceramics

292

Microstructural characterization and in vitro bioactivity of porous glass-ceramic scaffolds for bone regeneration by synchrotron radiation X-ray microtomography

293

Microstructural characterization and influence of manufacturing parameters on technological properties of vitreous ceramic materials

294

Microstructural characterization and mechanical behavior of Cu–Sn frangible bullets

295

Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys

296

Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions

297

Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111–TiAl6V4 dissimilar joints

298

Microstructural characterization and mechanical properties of microalloyed powder metallurgy steels

299

Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion

300

Microstructural characterization and mechanical properties of nitrided layers on aluminum substrate prepared by nitrogen arc

301

Microstructural characterization and mechanical property of active soldering anodized 6061 Al alloy using Sn–3.5Ag–xTi active solders

302

Microstructural characterization and microscopy analysis of laser cladding Stellite12 and tungsten carbide

303

Microstructural characterization and microstructural effects on the thermal conductivity of AlN(Y2O3) ceramics

304

Microstructural characterization and modeling of discontinuously-reinforced aluminum composites

305

Microstructural characterization and pore structure analysis of nuclear graphite

306

Microstructural characterization and quantification of Zn–Al–Mg surface coatings

307

Microstructural characterization and sliding wear behavior of ultra high carbon steels processed by mechanical alloying

308

Microstructural characterization and surface properties of zinc phosphated medium carbon low alloy steel

309

Microstructural characterization and tensile properties of hot pressed Al–SiC composites prepared from pure Al and Cu powders

310

Microstructural characterization and tensile properties of hot pressed Al–SiC composites prepared from pure Al and Cu powders

311

Microstructural characterization and tribocorrosion behaviour of Al/Al3Ti and Al/Al3Zr FGMs

312

Microstructural characterization and wear behavior of in situ TiC/7075 composites synthesized by displacement reactions and spray forming

313

Microstructural characterization and wear behavior of laser cladded nickel-based and tungsten carbide composite coatings

314

Microstructural characterization by electron backscatter diffraction of a hot worked Al–Cu–Mg alloy

315

Microstructural characterization during the hot deformation of 1.17C–11.3Cr–1.48V–2.24W–1.35Mo ledeburitic tool steel

316

Microstructural characterization in a hot-rolled, two-phase steel

317

Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

318

Microstructural characterization of (1 − x)TeO2–xPbF2 (x = 0.10, and 0.25 mol) glasses

319

Microstructural characterization of (Ni, Cu) Al intermetallic compounds rapidly solidified

320

Microstructural characterization of (Ni, Cu) Al intermetallic compounds rapidly solidified

321

Microstructural characterization of a composite Mo reinforced by 25 at.% TiC

322

Microstructural characterization of a diffusion-bonded joint for 9Cr-ODS and JLF-1 reduced activation ferritic/martensitic steels

323

Microstructural characterization of a directionally-solidified Ni–33 (at.%) Al–31Cr–3Mo eutectic alloy as a function of withdrawal rate

324

Microstructural characterization of a fine-grained ultra low carbon steel

325

Microstructural Characterization of a Mg–9%Li–1%Zn Alloy

326

Microstructural characterization of a new mechanically alloyed Ni-base ODS superalloy powder

327

Microstructural characterization of a rapidly solidified Al–10 Sb alloy

328

Microstructural characterization of a rapidly solidified Al–Sr–Ti alloy

329

Microstructural characterization of a warm-deformed microalloyed steel

330

Microstructural characterization of Al2O3–13 wt.% TiO2 ceramic coatings prepared by squash presetting laser cladding on GH4169 superalloy

331

Microstructural characterization of Al2O3–Ni composites prepared by electroless deposition

332

Microstructural characterization of Al-7075-T651 chips and work pieces produced by high-speed machining

333

Microstructural characterization of alkali metal mediated high temperature reactions in mullite based refractories

334

Microstructural characterization of alumina–zirconia layered ceramics using positron annihilation spectroscopy Original Research Article

335

Microstructural characterization of amorphous and nanocrystalline boron nitride prepared by high-energy ball milling

336

Microstructural characterization of amorphous SiO2 wrapped β-SiC nanowhiskers

337

Microstructural characterization of an as-quenched HSLA-100 plate steel via transmission electron microscopy

338

Microstructural characterization of an SA508–309L/308L–316L domestic dissimilar metal welded safe-end joint

339

Microstructural characterization of an ultrahigh carbon and boron tool steel processed by different routes

340

Microstructural characterization of an ultrahigh carbon and boron tool steel processed by different routes

341

Micro-structural characterization of annealed cadmium–zinc oxide thin films obtained by spray pyrolysis

342

Microstructural characterization of as-cast biocompatible Co–Cr–Mo alloys

343

Microstructural characterization of as-cast Co–B alloys

344

Microstructural characterization of as-cast Co–Si alloys

345

Microstructural characterization of as-cast Cr–B alloys

346

Microstructural characterization of as-cast Cr–Si alloys

347

Microstructural characterization of Au/Sn solder for packaging in optoelectronic applications

348

Microstructural Characterization of Au-In Thin Film Deposited by Electron Beam Evaporation : (Kajian Mikrostruktur Filem Nipis Au-In Diendapkan Menggunakan Penyejatan Sinar Elektron)

349

Microstructural Characterization of Bainitic Steel Submitted to Torsion Testing and Interrupted Accelerated Cooling

350

Microstructural characterization of bimetallic Ni–Pt catalysts supported on SiO2

351

Microstructural characterization of biomedical titanium oxide film fabricated by electrochemical method

352

Microstructural characterization of Ce1−xTbxO2−δ (0.60 ≤ x ≤ 0.90) sintered samples

353

Microstructural characterization of cemented carbide samples by image analysis techniques

354

Microstructural characterization of ceramic–intermetallic composites using TEM related techniques

355

Microstructural characterization of chitosan and alginate films by microscopy techniques and texture image analysis

356

Microstructural characterization of CIGS formation using different selenization processes

357

Microstructural characterization of cobalt–antimony eutectic alloy droplets solidified in drop tube

358

Microstructural characterization of cobalt–antimony eutectic alloy droplets solidified in drop tube

359

Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy

360

Microstructural characterization of copper corrosion in aqueous and soil environments

361

Microstructural characterization of creep anisotropy at 673 K in the M5® alloy Original Research Article

362

Microstructural characterization of creep cavitation in a fully-lamellar TiAl alloy

363

Microstructural characterization of C–SiC–carbon nanotube composite flakes Original Research Article

364

Microstructural characterization of Cu/ZnO/Al2O3 catalysts for methanol steam reforming—A comparative study Original Research Article

365

Microstructural characterization of deep-fat fried formulated products using confocal scanning laser microscopy and a non-invasive double staining procedure Original Research Article

366

Microstructural characterization of dispersion-strengthened Cu–Ti–Al alloys obtained by reaction milling

367

Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel

368

Microstructural characterization of doped-Pd/C catalysts for the selective hydrogenation of 2,4-dinitrotoluene to arylhydroxylamines Original Research Article

369

Microstructural characterization of droplet emulsified Mg60Cu30Y10 powders

370

Microstructural characterization of EUROFER 97 during low-cycle fatigue

371

Microstructural characterization of Eurofer-ODS RAFM steel in the normalized and tempered condition and after thermal aging in simulated fusion conditions

372

Microstructural characterization of Fe–Mn–C martensites athermally transformed at low temperature by Rietveld method

373

Microstructural characterization of Fe–Mn–C martensites athermally transformed at low temperature by Rietveld method

374

Microstructural characterization of ferrotitanium and ferroniobium

375

Microstructural characterization of fresh cement paste via random packing of ellipsoidal cement particles

376

Microstructural characterization of gas-pressure-sintered α-silicon nitride containing β-phase seeds

377

Microstructural characterization of Hadfield austenitic manganese steel

378

Microstructural characterization of Haynes® 242™ alloy

379

Microstructural characterization of Haynes® 242™ alloy

380

Microstructural characterization of hematite during wet and dry millings using Rietveld and XRD line profile analyses

381

Microstructural characterization of high pressure die cast Mg-Zn-Al-RE alloys

382

Microstructural characterization of high-carbon ferrochromium

383

Microstructural characterization of high-manganese austenitic steels with different stacking fault energies

384

Microstructural characterization of high-thermal-conductivity SiC ceramics

385

Microstructural characterization of in situ TiC/Al and TiC/Al–20Si–5Fe–3Cu–1Mg composites prepared by spray deposition Original Research Article

386

Microstructural characterization of intercritically annealed low alloy PM steels

387

Microstructural characterization of interface in SiC fiber-reinforced Ti–15V–3Cr–3Al–3Sn matrix composite

388

Microstructural characterization of interface in SiC fiber-reinforced Ti–15V–3Cr–3Al–3Sn matrix composite

389

Microstructural characterization of interpenetrating light weight metal matrix composites

390

Microstructural characterization of irradiation-induced Cu-enriched clusters in reactor pressure vessel steels

391

Microstructural characterization of La0.4Sr0.6Co0.8Fe0.2O3–δ films deposited by dip coating

392

Micro-structural characterization of laboratory heats of the Ferric/Martensitic steels HT-9 and T91

393

Microstructural characterization of laser cladding of Cu-30Ni

394

Micro-structural characterization of laser interference irradiated Ni/Al multi-films

395

Microstructural characterization of layered ternary Ti2AlC Original Research Article

396

Microstructural characterization of leaching effects in cement pastes due to neutralisation of their alkaline nature: Part I: Portland cement pastes

397

Microstructural characterization of mechanically activated ZnO–Cr2O3 system

398

Microstructural characterization of mechanically alloyed Al–Cu–Mn alloy with zirconium

399

Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite

400

Microstructural characterization of medical-grade stainless steel powders prepared by mechanical alloying and subsequent annealing

401

Microstructural characterization of metal foams: An examination of the applicability of the theoretical models for modeling foams

402

Microstructural characterization of modified 25Cr–35Ni centrifugally cast steel furnace tubes

403

Microstructural characterization of modified YSZ thermal barrier coatings by high-current pulsed electron beam

404

Microstructural characterization of MoO3–TiO2 nanocomposite thin films for gas sensing

405

Microstructural characterization of nanograin tin oxide gas sensors

406

Microstructural characterization of Nb–B–Si alloys with composition in the Nb−Nb5Si2B (T2-phase) vertical section

407

Microstructural characterization of Ni nanoparticles prepared by anodic arc plasma

408

Microstructural characterization of NiCr1BSiC laser clad layer on titanium alloy substrate

409

Microstructural characterization of nitrided beta Ti–Mo alloys at 1400 °C

410

Microstructural Characterization of Novel Ni-Containing Nd-Fe-B Strips by Strip Casting

411

Microstructural characterization of oxide dispersion strengthened ferritic steel powder

412

Microstructural characterization of pipe bomb fragments

413

Microstructural characterization of plasma nitrided austenitic stainless steel

414

Microstructural characterization of plasma sprayed Al2O3-40 wt.% TiO2 coatings on high density graphite with different post-treatments

415

Microstructural characterization of plasma sprayed conventional and nanostructured coatings with nitrogen as primary plasma gas

416

Microstructural characterization of plasma sprayed TiO2 functional coating with gradient of crystal grain size

417

Microstructural characterization of plasma-sprayed hydroxyapatite–10 wt% ZrO2 composite coating on titanium

418

Microstructural characterization of plasma-sprayed nanostructured zirconia powders and coatings

419

Microstructural characterization of PM-Al and PM-Al/Si composites reinforced with lignite fly ash

420

Microstructural characterization of porous materials by two-dimensional X-ray refraction topography

421

Microstructural characterization of porous thermal barrier coatings by IR gas porosimetry and sintering forecasts Original Research Article

422

Microstructural characterization of porous thermal barrier coatings by laser flash technique Original Research Article

423

Microstructural characterization of precipitates in Cu–10 wt.%Al–0.8 wt.%Be shape-memory alloy

424

Microstructural characterization of pulsed electrodeposited Au/Sn alloy thin films

425

Microstructural characterization of pulsed plasma nitrided 316L stainless steel

426

Microstructural characterization of rapidly solidified and heat-treated Ti92B8 eutectic alloy

427

Microstructural characterization of reaction-formed silicon carbide ceramics

428

Microstructural characterization of recrystallised Zircaloy-2 after pilgering using X-ray diffraction line profile analysis

429

Microstructural characterization of rheo-cast billets prepared by variant pouring temperatures

430

Microstructural characterization of segregation and precipitation in α2+γ titanium aluminides

431

Microstructural characterization of segregation and precipitation in α2+γ titanium aluminides

432

Microstructural characterization of self-supported 1.6 μm Pd/Ag membranes

433

Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel

434

Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel

435

Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel

436

Microstructural characterization of single-crystalline potassium hollandite nanowires

437

Microstructural characterization of SOFC Ni–YSZ anode composites by low-voltage scanning electron microscopy

438

Microstructural characterization of spark plasma sintered boron carbide ceramics

439

Microstructural Characterization of Spray Formed FGH4095 Superalloy During Hot Deformation Original Research Article

440

Microstructural characterization of squeeze-cast Al–8Fe–1.4V–8Si

441

Microstructural characterization of starch systems by NMR relaxation and q-space microscopy

442

Microstructural characterization of terbium-doped ceria

443

Microstructural characterization of textured ZnS thin films

444

Microstructural characterization of the C–Mn multiphase high strength cold rolled steel

445

Microstructural characterization of the evoluted phases of ball-milled α-Fe2O3 powder in air and oxygen atmosphere by Rietveld analysis

446

Microstructural characterization of the HAZ in AISI 444 ferritic stainless steel welds

447

Microstructural characterization of the interaction between 8YPSZ (EB-PVD) thermal barrier coatings and a synthetic CAS

448

Microstructural characterization of the Mg–Al alloy AM50 produced by a newly developed rheo-casting process

449

Microstructural characterization of the ODS Eurofer 97 EU-batch

450

Microstructural characterization of the oxide scale on nitride bonded SiC-ceramics

451

Microstructural characterization of the tool–chip interface enabled by focused ion beam and analytical electron microscopy

452

Microstructural characterization of thermal barrier coatings on high pressure turbine blades

453

Microstructural characterization of thin carbon films deposited from hydrocarbon mixtures

454

Microstructural characterization of thin SiOx films obtained by physical vapor deposition

455

Microstructural characterization of Ti–6Al–4V machining chips after remelting and severe deformation

456

Microstructural characterization of Ti–C–N thin films prepared by reactive crossed beam pulsed laser deposition

457

Microstructural characterization of Ti–TiN/CNx gradient-multilayered coatings

458

Microstructural characterization of transformable Fe–Mn alloys at different length scales

459

Microstructural characterization of TRIP-aided steels

460

Microstructural characterization of U–7Mo/Al–Si alloy matrix dispersion fuel plates fabricated at 500 °C

461

Microstructural characterization of unidirectional solidified eutectic Al–Si–Ni alloy

462

Microstructural characterization of vocal folds toward a strain-energy model of collagen remodeling

463

Microstructural characterization of WC-TiC-Co cutting tools during high-speed machining of P20 mold steel

464

Microstructural characterization of weld joints of 9Cr reduced activation ferritic martensitic steel fabricated by different joining methods

465

Microstructural characterization of welded zone for Fe3Al/Q235 fusion-bonded joint

466

Microstructural characterization of white charcoal

467

Microstructural characterization of white charcoal

468

Microstructural characterization of Y2O3 ODS–Fe–Cr model alloys

469

Microstructural characterization of yam starch films

470

Microstructural characterization of yttria-stabilized zirconia plasma-sprayed deposits using multiple small-angle neutron scattering Original Research Article

471

Microstructural characterization of ZrB2–SiC based UHTC tested in the MESOX plasma facility

472

Microstructural characterization of ZrB2–SiC–Si–MoSi2–WC coatings applied by SPS on graphite substrate

473

Microstructural characterization of ZrC-MoSi2 composites oxidized in air at high temperatures

474

Microstructural characterization of ZrO2 layers formed during the transition to breakaway oxidation

475

Microstructural characterization of Zr-phosphate–Nafion® membranes for direct methanol fuel cell (DMFC) applications

476

Microstructural characterization of β-lactoglobulin–konjac glucomannan systems: Effect of NaCl concentration and heating conditions

477

Microstructural characterization on ZrC doped carbon/carbon composites

478

Microstructural characterization studies to relate the properties of thermal-spray coatings to feedstock and spray conditions

479

Microstructural characterization using orientation imaging microscopy of cellular Si/SiC ceramics synthesized by replication of Indian dicotyledonous plants

480

Microstructural characterization using the Rietveld method in lead lanthanum titanate ceramics system produced by combustion synthesis

481

Microstructural characterization, meso-scale modeling and multiple-scale analysis of discretely reinforced materials

482

Microstructural characterization, meso-scale modeling and multiple-scale analysis of discretely reinforced materials

483

Microstructural characterizations and mechanical behavior of polyurethane elastomers strengthened with milled fiberglass

484

Microstructural characterizations of magnetron sputtered Ti films on glass substrate

485

Microstructural characterizations of plasma sprayed hydroxyapatite coatings

486

Microstructural coarsening kinetics for a mushy zone of a pure material

487

Microstructural coarsening of 7005 aluminum alloy semisolid billets with high solid fraction

488

Microstructural coarsening of semi-solid aluminium alloys

489

Microstructural comparison of porous oxide ceramics from the system Al2O3–ZrO2 prepared with starch as a pore-forming agent

490

Microstructural comparison of Zr73.5Nb9Cu7Ni1Al9.5 nanostructure-dendrite composites produced by different casting techniques

491

Microstructural composite mullite derived from oxides via a high-energy ball milling process

492

Microstructural consequences of nanosilica addition on aerial lime binding materials: Influence of different drying conditions

493

Microstructural consideration on quantitative analysis of thermal treatment: Application to decarburization of steel

494

Microstructural consideration on quantitative analysis of thermal treatment: Application to decarburization of steel

495

Microstructural control and mechanical properties of nickel silicides

496

Microstructural control and mechanical properties of Ti–47Al–2Cr–2Nb alloy by directional solidification electromagnetic cold crucible technique

497

Microstructural control for ductilization of multi-phase alloys based on B2 CoAl

498

Microstructural control for ductilization of multi-phase alloys based on B2 CoAl

499

Microstructural control for strengthening the γ-Fe/E21–(Fe, Mn)3AlCx alloys

500

Microstructural control for strengthening the γ-Fe/E21–(Fe, Mn)3AlCx alloys

501

Microstructural control of aluminum sheet used in automotive applications

502

Microstructural control of carbon nano fibers

503

Microstructural control of catalyst-loaded PVDF microcapsule membrane for hydrogen generation by NaBH4 hydrolysis

504

Microstructural control of Cr–Si–N films by a hybrid arc ion plating and magnetron sputtering process Original Research Article

505

Microstructural control of duplex Ti–46.5Al–2Cr–1.5Nb–1V alloys

506

Microstructural control of Nb addition in nanocrystalline hard magnets with different Nd content

507

Microstructural control of Nb–Si alloy for large Nb grain formation through eutectic and eutectoid reactions

508

Microstructural control of porous silicon by electrochemical etching in mixed HCl/HF solutions

509

Microstructural control of TiAl–Nb alloys by directional solidification Original Research Article

510

Microstructural control of TiC/a-C nanocomposite coatings with pulsed magnetron sputtering Original Research Article

511

Microstructural control of ultrafine and nanocrystalline WC–12Co–VC/Cr3C2 mixture by spark plasma sintering

512

Microstructural control through seeding and directional solidification of TiAl alloys containing Mo and C Original Research Article

513

Microstructural control to improve the resistance to radiation embrittlement in vanadium

514

Microstructural correlations to micromechanical properties of polyamide-6/low density polyethylene-grafted-maleic anhydride/nanoclay ternary nanocomposites

515

Microstructural corrosion behavior of a cold-worked steel in a sour environment

516

Microstructural defects in Ba(Mg1/3Ta2/3)O3 microwave dielectric materials

517

Microstructural defects in SiC neutron irradiated at very high temperatures

518

Microstructural deformation pattern and mechanical behavior analyses of DP600 dual phase steel

519

Microstructural degeneration of simulated heat-affected zone in 2.25Cr–1Mo steel during high-temperature exposure

520

Microstructural degeneration of simulated heat-affected zone in 2.25Cr–1Mo steel during high-temperature exposure

521

Microstructural degeneration of simulated heat-affected zone in 2.25Cr–1Mo steel during high-temperature exposure

522

Microstructural degradation mechanisms during creep in strength enhanced high Cr ferritic steels and their evaluation by hardness measurement

523

Microstructural degradation of Gr.91 steel during creep under low stress

524

Microstructural degradation of two cast heat resistant reformer tubes after long term service exposure

525

Microstructural dependence of electrical conductivity of (ZrO2)0.90–(Y2O3)0.04–(CaO)0.06 solid electrolyte

526

Microstructural dependence of electrical transport in bulk CuxGe1−x alloys

527

Microstructural dependence of electrical transport in bulk CuxGe1−x alloys

528

Microstructural dependence of fracture toughness in high-strength 7000 forging alloys

529

Microstructural dependence of the thermal and mechanical properties of monazite LnPO4 (Ln = La to Gd)

530

Microstructural dependence of Youngʹs and shear moduli of P2O5 glass reinforced hydroxyapatite for biomedical applications

531

Microstructural dependence on relevant physical–mechanical properties on SiO2–Na2O–CaO–P2O5 biological glasses

532

Microstructural dependency of thermal expansion and sintering shrinkage in plasma-sprayed zirconia coatings

533

Microstructural description of packed bed using Voronoi polyhedra

534

Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics

535

Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics Original Research Article

536

Micro-structural design and function of an improved absorptive glass mat (AGM) separator for valve-regulated lead–acid batteries

537

Microstructural design and high temperature tensile deformation behaviour of 8 mol% yttria stabilized cubic zirconia (8YCSZ) with SiO2 additions

538

Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy

539

Microstructural design and mechanical properties of porous silicon nitride ceramics

540

Microstructural design considerations for Li-ion battery systems

541

Microstructural design for mechanical and electrical properties of spark plasma sintered Al2O3–SiC nanocomposites

542

Microstructural design for thermal creep and radiation damage resistance of titanium aluminide alloys for high-temperature nuclear structural applications

543

Microstructural design of BaTiO3-based ceramics for temperature-stable multilayer ceramic capacitors

544

Microstructural design of Ca α-sialon ceramics: effects of starting compositions and processing conditions

545

Microstructural design of hard coatings

546

Microstructural design of hardfacing Ni–Cr–B–Si–C alloys Original Research Article

547

Microstructural design of PZT ceramics

548

Microstructural design of sliding-wear-resistant liquid-phase-sintered SiC: An overview

549

Microstructural design, characterisation and indentation responses of layer-graded alumina/aluminium–titanate composites

550

Microstructural designing of silicon nitride related to toughness

551

Microstructural development and creep behavior in A286 superalloy

552

Microstructural development and electrical properties of lead zirconate titanate composite films

553

Microstructural development and electrochemical characteristics of lithium cobalt oxide powders prepared by the water-in-oil emulsion process

554

Microstructural development and mechanical properties of hypereutectic Sn–Cu solderalloys

555

Microstructural development and mechanical properties of iron based cermets processed by pressureless and spark plasma sintering

556

Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles

557

Microstructural development and mechanical properties of self-reinforced alumina with CAS addition

558

Microstructural development and microwave properties of ZnO-doped tin titanate zirconate

559

Microstructural development and microwave properties of ZnO-doped tin titanate zirconate

560

Microstructural development and radiation hardening of neutron irradiated Mo–Re alloys

561

Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part I

562

Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part II—use of a Ni interlayer

563

Microstructural development during ageing of an 11% chromium steel alloyed with copper

564

Microstructural development during ageing of an 11% chromium steel alloyed with copper

565

Microstructural development during diffusion bonding of α-silicon carbide to molybdenum

566

Microstructural development during diffusion bonding of α-silicon carbide to molybdenum

567

Microstructural development during directional solidification of α-seeded TiAl alloys Original Research Article

568

Microstructural development during equal channel angular pressing of hypo-eutectic Al–Si casting alloy by different processing routes

569

Microstructural development during final-stage sintering of nanostructured zirconia based ceramics

570

Microstructural development during final-stage sintering of nanostructured zirconia based ceramics

571

Microstructural development during high temperature creep of 9% Cr steel

572

Microstructural development during high temperature creep of 9% Cr steel

573

Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel Original Research Article

574

Microstructural development during transient directional solidification of hypermonotectic Al–Bi alloys

575

Microstructural development in a low carbon Ti-microalloyed steel during deformation within the ferrite region

576

Microstructural development in a model austenitic alloy following electron and ion irradiation

577

Microstructural development in a rapidly cooled eutectic Sn–3.5% Ag solder reinforced with copper powder

578

Microstructural development in advanced ferritic–martensitic steel HCM12A

579

Microstructural development in AlN composite ceramics

580

Micro-structural development in Al–Si microcrystalline alloys

581

Micro-structural development in Al–Si microcrystalline alloys

582

Micro-structural development in Al–Si microcrystalline alloys

583

Microstructural development in Al–Sn alloys directionally solidified under transient heat flow conditions

584

Microstructural development in an ultrafine cement — Part II

585

Microstructural development in cubic silicon carbide during irradiation at elevated temperatures

586

Microstructural development in equal-channel angular pressing using a 60° die Original Research Article

587

Microstructural development in equiatomic multicomponent alloys

588

Microstructural development in equiatomic multicomponent alloys

589

MICROSTRUCTURAL DEVELOPMENT IN FLY ASH MODIFIED WITH LIME AND GYPSUM

590

Microstructural Development in Friction Welded AZ31 Magnesium Alloy

591

Microstructural development in irradiated U-7Mo/6061 Al alloy matrix dispersion fuel

592

Microstructural development in nanocrystalline during H-absorption/desorption cycling

593

Microstructural development in porous β-Si3N4 ceramics prepared with low volume RE2O3–MgO–(CaO) additions (RE = La, Nd, Y, Yb)

594

Microstructural development in PWA-1480 electron beam welds — an atom probe field ion microscopy study

595

Microstructural development in rapidly solidified silicon-rich alloys

596

Microstructural development in rapidly solidified silicon-rich alloys

597

Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions

598

Microstructural development in the dual phase intermetallic alloy Ni50Al25Be25

599

Microstructural development in volcanic ash soils from South Chile

600

Microstructural development inside the stress induced martensite variant in a Ti–Ni–Nb shape memory alloy Original Research Article

601

Microstructural development involving nucleation and growth phenomena simulated with the Phase Field method

602

Microstructural development involving nucleation and growth phenomena simulated with the Phase Field method

603

Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration

604

Microstructural development of a heavily neutron-irradiated ODS ferritic steel (MA957) at elevated temperature

605

Microstructural development of a vitrified hindered phenol compound during thermal annealing

606

Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing

607

Microstructural development of Al–15wt.%Mg2Si in situ composite with mischmetal addition

608

Microstructural development of Al–15wt.%Mg2Si in situ composite with mischmetal addition

609

Microstructural development of diffusion-brazed austenitic stainless steel to magnesium alloy using a nickel interlayer

610

Microstructural development of early age hydration shells around cement grains

611

Micro-structural development of gap-graded blended cement pastes containing a high amount of supplementary cementitious materials

612

Microstructural development of high temperature deformed AZ31 magnesium alloys

613

Microstructural development of indirect-extruded TiAl–Mn–Mo–C intermetallic alloys during aging

614

Microstructural development of indirect-extruded TiAl–Mn–Mo–C intermetallic alloys during aging

615

Microstructural development of interface layers between co-sintered alumina and spinel compacts

616

Microstructural development of liquid-phase-sintered silicon carbide during annealing with uniaxial pressure

617

Microstructural development of neutron irradiated W–Re alloys

618

Microstructural development of Ni-1Ce10ScSZ cermet electrode for Solid Oxide Electrolysis Cell (SOEC) application

619

Microstructural development of silicon nitride with aligned β-Si3N4 whiskers

620

Microstructural development of SrAl12O19 in alumina–strontia composites

621

Microstructural Development of Stabilized Fly Ash as Pavement Base Material

622

Microstructural development of thin films grown by pulsed laser deposition

623

Microstructural development of thin films grown by pulsed laser deposition

624

Microstructural development of tin-doped ZnO bulk ceramics

625

Microstructural development of Y-α/(β)-sialons after post heat-treatment and its effect on mechanical properties

626

Microstructural development on sol–gel derived cordierite ceramics doped B2O3 and P2O5

627

Microstructural development under irradiation in European ODS ferritic/martensitic steels

628

Microstructural developments in TLP bonds using thin interlayers based on Ni–B coatings

629

Microstructural dynamics in a foreign exchange electronic broking system

630

Microstructural effect of the shrinkage of cement-based materials during hydration, as indicated by electrical resistivity measurement

631

Microstructural effect of α-Sialon ceramic on the resistance to cavitation erosion in deionized water

632

MICROSTRUCTURAL EFFECT ON LOW CYCLE FATIGUE BEHAVIOUR IN Ti-ALLOYS UNDER BIAXIAL LOADING

633

Microstructural effect on moisture-induced embrittlement of the Ni3(Si,Ti)-based alloys

634

Microstructural effect on moisture-induced embrittlement of the Ni3(Si,Ti)-based alloys

635

Microstructural effect on near-neutral pH stress corrosion cracking resistance of pipeline steels

636

Microstructural effects and large microhardness in cobalt processed by high pressure torsion consolidation of ball milled powders Original Research Article

637

Microstructural effects in elastic composites

638

Microstructural effects in finite multilayers with aligned cracks

639

Microstructural effects in low loss power ferrites

640

Microstructural effects of AZ31 magnesium alloy on its tensile deformation and failure behaviors

641

Microstructural Effects of Ion Implantation on Molybdenum

642

Microstructural effects of processing in the plastic-bonded explosive Composition A-3

643

Microstructural effects of temperature and neutron irradiation on optical windows

644

Microstructural effects on crack closure and propagation thresholds of small fatigue cracks

645

Microstructural effects on crack path selection in bending and fatigue in a Nb–19Si–5Cr–3.5Hf–24Ti–0.75Sn–1W alloy

646

Microstructural effects on ductile fracture in heterogeneous materials. Part I: Sensitivity analysis with LE-VCFEM

647

Microstructural effects on ductile fracture in heterogeneous materials. Part II: Applications to cast aluminum microstructures

648

Microstructural effects on internal mass transfer of lipids in prepressed and flaked vegetable substrates

649

Microstructural effects on macroscopic fracture properties Special Issue: 19th European Conference on Fracture (ECF19) selected papers

650

Microstructural effects on microbial survival: phase-separating dextran solutions

651

Microstructural effects on tensile properties of cast TiAl–Fe–V–B alloy

652

Microstructural effects on tensile properties of cast TiAl–Fe–V–B alloy

653

Microstructural effects on tension and fatigue behavior of Cu–15Ni–8Sn sheet

654

Microstructural effects on tension behavior of Cu–15Ni–8Sn sheet

655

Microstructural effects on the dry wear resistance of powder metallurgy Al–Si alloys

656

Microstructural effects on the electrical and mechanical properties of Ni–YSZ cermet for SOFC anode

657

Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3+δ materials on changing from reducing to oxidising conditions

658

Microstructural effects on the electrical properties of grain boundary Fe-doped LSGM

659

Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld

660

Microstructural effects on the formation and degradation of zinc phosphate coatings on 2024-Al alloy

661

Microstructural effects on the fretting wear of Inconel 690 steam generator tube

662

Microstructural effects on the initiation of zinc phosphate coatings on 2024-T3 aluminum alloy

663

Microstructural effects on the magnitude of Lüders strains in a low alloy steel

664

Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys Original Research Article

665

Microstructural effects on the permeability of periodic fibrous porous media

666

Microstructural effects on the resistance to cavitation erosion of ZrO2 ceramics in water

667

Microstructural effects on the short crack behaviour of a stainless steel weld metal during low-cycle fatigue

668

Microstructural effects on the sliding wear of transparent magnesium-aluminate spinel

669

Microstructural effects on the sliding-wear resistance of pressureless liquid-phase-sintered SiC under diesel fuel

670

Microstructural effects on the superionic conductivity of a lithiated glass-ceramic

671

Microstructural effects on the transmittance of translucent AlN ceramics by SPS

672

Microstructural effects on yield surface evolution in cubic metals using the viscoplastic ϕ-model

673

Microstructural elasticity and regional heterogeneity in human femoral bone of various ages examined by nano-indentation

674

Microstructural engineering of functionally graded materials by electrophoretic deposition

675

Microstructural engineering of microwave dielectric ceramics

676

Microstructural evaluation and flexural mechanical behavior of pultruded glass fiber composites

677

Microstructural evaluation and mechanical properties of Ir–Hf–Zr ternary alloys at room and high temperatures

678

Microstructural Evaluation and Strain Life Behavior of Friction Stir Processed Ferritic Nodular Iron

679

Microstructural Evaluation for TIG Welding of AA6061-T6 using ER5356 Filler Metal; in Postweld and as-Weld Treatment

680

Microstructural evaluation of a clay ceramic incorporated with petroleum waste

681

Microstructural evaluation of deep-fat fried chicken nugget batter coating using confocal laser scanning microscopy Original Research Article

682

Microstructural evaluation of interfacial intermetallic compounds in Cu wire bonding with Al and Au pads

683

Microstructural evaluation of monolithic and continuous fibre reinforced Al-12wt.%Si produced by low pressure plasma spraying

684

Microstructural evaluation of monolithic and continuous fibre reinforced Al-12wt.%Si produced by low pressure plasma spraying

685

Microstructural evaluation of thermally fatigued SiC-reinforced Al2O3/ZrO2 matrix composites

686

Micro-structural evaluation of Ti/Al/Ni/Au ohmic contacts with different Ti/Al thicknesses in AlGaN/GaN HEMTs

687

Microstructural evaluation of U-rich U–Zr alloys under near-equilibrium condition

688

Microstructural evaluation of ZrO2–MgO coatings

689

Microstructural evidence for conditioning-dependent δ → α′ transformations in retained δ-phase Pu–Ga Original Research Article

690

Microstructural evidence for N–S shortening in the Mount Isa Inlier (NW Queensland, Australia): the preservation of early W–E-trending foliations in porphyroblasts revealed by independent 3D measurement techniques

691

Microstructural evidence for the thermal oxidation protection of carbon/phenolic towpregs and composites Original Research Article

692

Microstructural evolution analysis of NITE SiC/SiC composite using TEM examination and dual-ion irradiation

693

Microstructural Evolution and Age Hardening in Aluminium Alloys: Atom Probe Field-Ion Microscopy and Transmission Electron Microscopy Studies

694

Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy

695

Microstructural evolution and amorphous phase formation of Fe42Ni28Zr8Ta2B10C10 alloy produced by mechanical alloying

696

Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep

697

Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep

698

Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings

699

Microstructural evolution and compressive deformation of a new Ni–Fe base superalloy after long term thermal exposure at 700 °C

700

Microstructural evolution and contact-mechanical properties of SiC ceramics prepared colloidally with low additive content

701

Microstructural evolution and creep properties of precipitation-strengthened Al–0.06Sc–0.02Gd and Al–0.06Sc–0.02Yb (at.%) alloys Original Research Article

702

Microstructural evolution and deformation mechanism of the 80 W-20Cu alloy at ultra-high strain rates under explosive loading

703

Microstructural evolution and dielectric properties of Cu-deficient and Cu-excess CaCu3Ti4O12 ceramics

704

Microstructural evolution and dielectric properties of SiO2-doped CaCu3Ti4O12 ceramics

705

Microstructural evolution and electric properties of mechanically activated BaTiO3 ceramics

706

Microstructural evolution and electro-resistivity in HPT nickel

707

Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation Original Research Article

708

Microstructural evolution and final properties of a cold-swaged multifunctional Ti–Nb–Ta–Zr–O alloy produced by a powder metallurgy route

709

Microstructural evolution and flow stress of semi-solid type 304 stainless steel

710

Microstructural evolution and formation mechanism of bimodal structure of 0.2% carbon steel subjected to the heavy-reduction controlled rolling process

711

Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt Original Research Article

712

Microstructural evolution and geologic significance of garnet pyriclasites in the Hoher-Bogen shear zone (Bohemian Massif, Germany)

713

Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy Original Research Article

714

Microstructural evolution and grain boundary structure during static recrystallization in synthetic polycrystals of Sodium Chloride containing saturated brine

715

Microstructural evolution and hardening parameters

716

Microstructural evolution and hardening parameters

717

Microstructural evolution and hardness changes in the interface of Cu/316L joint materials under aging and ion irradiation

718

Microstructural evolution and hardness of TiAl3 and TiAl2 phases on Ti–45Al–2Nb–2Mn–1B by plasma pack aluminizing

719

Microstructural evolution and hydride precipitation mechanism in hydrogenated Ti–6Al–4V alloy

720

Microstructural evolution and interfacial crystallography in Cr–Cr2Ta

721

Microstructural evolution and its correlation with hardening of WC-Ni cemented carbides irradiated by high-intensity pulsed ion beam

722

Microstructural evolution and its effect on mechanical properties of commercially pure aluminum deformed by ECAE (Equal Channel Angular Extrusion) via routes A and C

723

Microstructural evolution and its influence on creep and stress relaxation in nanocrystalline Ni Original Research Article

724

Microstructural evolution and low temperature impact toughness of a Fe–13%Cr–4%Ni–Mo martensitic stainless steel

725

Microstructural evolution and Maxwell–Wagner relaxation in Ca2Cu2Ti4−xZrxO12: The important clue to achieve the origin of the giant dielectric behavior

726

Microstructural evolution and mechanical behaviors of graded cemented carbides

727

Microstructural evolution and mechanical behaviour of surface hardened low carbon hot rolled steel

728

Microstructural evolution and mechanical characteristics in nanocrystalline nickel with a bimodal grain-size distribution

729

Microstructural evolution and mechanical performances of SiC/SiC composites by polymer impregnation/microwave pyrolysis (PIMP) process

730

Microstructural evolution and mechanical properties in Zr705 during the rolling process

731

Microstructural evolution and mechanical properties of a Cu–Zr alloy processed by high-pressure torsion

732

Microstructural evolution and mechanical properties of a nickel-based honeycomb sandwich

733

Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strains Original Research Article

734

Microstructural evolution and mechanical properties of accumulative roll bonded interstitial free steel

735

Microstructural evolution and mechanical properties of Al–40 wt.%Zn alloy processed by equal-channel angular extrusion

736

Microstructural evolution and mechanical properties of an Nb–16Si in-situ composite with Fe additions prepared by arc-melting

737

Microstructural evolution and mechanical properties of as-cast and T6-treated AA2195 DC cast alloy

738

Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Prepared by Casting-solid Extrusion Forging During Partial Remelting

739

Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing Original Research Article

740

Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding

741

Microstructural evolution and mechanical properties of friction stir welded Mg–Zn–Y–Zr alloy

742

Microstructural evolution and mechanical properties of friction stir welded ODS alloy MA754

743

Microstructural evolution and mechanical properties of friction-stir-welded Al–Mg–Si joint

744

Microstructural evolution and mechanical properties of high strength microalloyed steels: Ultra Fast Cooling (UFC) versus Accelerated Cooling (ACC)

745

Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel

746

Microstructural evolution and mechanical properties of low alloy steel tempered by induction heating

747

Microstructural evolution and mechanical properties of Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr alloy prepared via pre-ageing and hot extrusion

748

Microstructural Evolution and Mechanical Properties of Mo40/C93200 Bimetal Processed by Compound Casting

749

Microstructural Evolution and Mechanical Properties of Nb-Ti Microalloyed Pipeline Steel Original Research Article

750

Microstructural evolution and mechanical properties of niobium processed by equal channel angular extrusion up to 24 passes Original Research Article

751

Microstructural evolution and mechanical properties of oil jet peened aluminium alloy, AA6063-T6

752

Microstructural evolution and mechanical properties of semisolid stir welded zinc AG40A die cast alloy

753

Microstructural evolution and mechanical properties of the joint of TiAl alloys and C/SiC composites vacuum brazed with Ag–Cu filler metal

754

Microstructural evolution and mechanical properties of the semisolid Al–4Cu–Mg alloy

755

Microstructural evolution and mechanical properties of the Ti–6Al–4V alloy produced by vacuum hot-pressing

756

Microstructural evolution and mechanical properties of ultrafine grained Al3Ti/Al–5.5Cu composites produced via hot pressing and subsequent friction stir processing

757

Microstructural Evolution and Mechanical Properties of Ultrafine/nano Structured AISI 321 Stainless Steel Produced by Thermo mechanical Processing

758

Microstructural evolution and mechanical property in dual two-phase intermetallic alloys composed of geometrically close-packed Ni3X (X: Al and V) containing Nb

759

Microstructural evolution and mechanical property of Al–Zr and Al–Zr–Y alloys

760

Microstructural evolution and mechanical response of nanocrystalline and ultrafine-grained steel obtained by mechanical milling

761

Microstructural evolution and mechanisms of superplasticity in large-grained iron aluminides

762

Microstructural evolution and mechanisms of superplasticity in large-grained iron aluminides

763

Microstructural evolution and microhardness change of Al–7wt%Si–0.3wt%Mg alloy granules/powder particles during high energy ball milling

764

Microstructural evolution and microhardness of a melt-spun Al–5Ti–1B alloy during annealing

765

Microstructural evolution and microhardness of a melt-spun Al–5Ti–1B alloy during annealing

766

Microstructural evolution and microhardness of a melt-spun Al–6Ni–2Cu–1Si (in wt.%) alloy

767

Microstructural evolution and micromechanical properties of gamma-irradiated Au ball bonds

768

Microstructural evolution and modelling of the hot compression of a TC6 titanium alloy

769

Microstructural evolution and nanocrystal formation during deformation of Fe–C alloys

770

Microstructural evolution and nanocrystal formation during deformation of Fe–C alloys

771

Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures Original Research Article

772

Microstructural evolution and observed stress response during hot deformation of 5005 and 6022 Al alloys

773

Microstructural evolution and optical properties of doped TiO2 films prepared by RF magnetron sputtering

774

Microstructural evolution and optical properties of TiO2 synthesized by eggshell membrane templating for DSSCs application

775

Microstructural evolution and oxidation behavior of nanocrystalline 316-stainless steel coatings produced by high-velocity oxygen fuel spraying

776

Microstructural evolution and oxidation behavior of nanocrystalline 316-stainless steel coatings produced by high-velocity oxygen fuel spraying

777

Microstructural evolution and oxidation resistance of polyacrylonitrile-based carbon fibers doped with boron by the decomposition of B4C Original Research Article

778

Microstructural evolution and phase development of Nb and Y doped TiO2 films prepared by RF magnetron sputtering

779

Microstructural evolution and phase transformation kinetics of pulse-electroplated Ni–Cu–P alloy film during annealing

780

Microstructural evolution and phase transformation of different sintered Kaolins powder compacts

781

Microstructural evolution and phase transition dependent on annealing temperature and carbon content for LaFe11.5Si1.5Cx compounds prepared by arc-melting

782

Microstructural evolution and pitting resistance of annealed lean duplex stainless steel UNS S32304

783

Microstructural evolution and rheological behaviour of aluminium alloys A356, and A356 + 0.5% Sn designed for thixocasting

784

Microstructural evolution and rheological behaviour of marbles deformed at different crustal levels

785

Microstructural evolution and shear fracture of Cu–16 at.% Al alloy induced by equal channel angular pressing

786

Microstructural evolution and stability of (Fe1−xVx)3Al alloys in relation to the electronic structure

787

Microstructural evolution and strain hardening behavior during plastic deformation of Fe–12Mn–8Al–0.8C steel

788

Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation Original Research Article

789

Microstructural evolution and strengthening mechanisms in Ti–Nb–Zr–Ta, Ti–Mo–Zr–Fe and Ti–15Mo biocompatible alloys

790

Microstructural evolution and superplasticity of rolled Mg-9Al-1Zn

791

Microstructural evolution and superplasticity of rolled Mg-9Al-1Zn

792

Microstructural evolution and tensile mechanical properties of thixoforged ZK60-Y magnesium alloys produced by two different routes

793

Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys

794

Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys

795

Microstructural evolution and tensile properties of the in situ Al–15%Mg2Si composite with extra Si contents

796

Microstructural Evolution and Tensile Properties of Ti-Al-V Alloys Manufactured by Plasma Spraying and Subsequent Vacuum Hot Pressing

797

Microstructural evolution and the effect on hardness and plasticity of S31042 heat-resistant steel during creep

798

Microstructural evolution and the variation of tensile behavior after aging heat treatment of precipitation hardened martensitic steel

799

Microstructural evolution and tribological behavior of Mo–Cu–N coatings as a function of Cu content

800

Microstructural evolution at high strain rates in solution-hardened interstitial free steels

801

Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel

802

Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel

803

Microstructural evolution at the worn surface: a comparison of metals and ceramics

804

Microstructural evolution based on the pressure-assisted master sintering surface

805

Microstructural evolution based on the pressure-assisted master sintering surface

806

Microstructural evolution based on the pressure-assisted master sintering surface

807

Microstructural evolution caused by electromagnetic stirring in superheated AlSi7Mg alloys

808

Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

809

Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

810

Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

811

Microstructural evolution during annealing and rolling Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass

812

Microstructural evolution during charcoal carbonization by X-ray diffraction analysis Original Research Article

813

Microstructural evolution during creep of 316LN stainless steel multi-pass weld joints

814

Microstructural evolution during creep of 9Cr-ODS steels

815

Microstructural evolution during creep of a duplex near-γ TiAl-Alloy

816

Microstructural evolution during creep of a duplex near-γ TiAl-Alloy

817

Microstructural evolution during creep of Ca-containing AZ91

818

Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process Original Research Article

819

Microstructural evolution during direct laser sintering in the Al2O3–SiO2 system

820

Microstructural evolution during directional annealing Original Research Article

821

Microstructural evolution during dry wear test in magnesium and Mg–Y alloy

822

Microstructural evolution during extrusion of a Ti/Al/Al35V65 (Ti–6Al–4V) powder compact and the mechanical properties of the extruded rod

823

Microstructural evolution during fatigue of ultrafine grained aluminum alloy

824

Microstructural Evolution during Forming of Metals

825

Microstructural evolution during fracture induced by high strain rate deformation of 100Cr6 steel

826

Microstructural evolution during friction stir welding of Ti–15V–3Cr–3Al–3Sn alloy

827

Microstructural evolution during friction stir-processing of pure iron Original Research Article

828

Microstructural evolution during friction surfacing of tool steel H13

829

Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials Original Research Article

830

Microstructural evolution during heat treatments in Ti-45 and 47Al–2Nb–2Mn+0.8vol.%TiB2 XDTM alloys

831

Microstructural evolution during heat treatments in Ti-45 and 47Al–2Nb–2Mn+0.8vol.%TiB2 XDTM alloys

832

Microstructural evolution during high energy ball milling of Fe2O3-SiO2 powders

833

Microstructural evolution during high temperature sliding wear of Mg–3% Al–1% Zn (AZ31) alloy

834

Microstructural evolution during high-temperature exposure in a thixocast magnesium alloy

835

Microstructural evolution during high-temperature exposure in a thixocast magnesium alloy

836

Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti2AlN ceramics Original Research Article

837

Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics Original Research Article

838

Microstructural evolution during hot pressing of the blended elemental Ti–6%Al–7%Nb alloy

839

Microstructural evolution during hot pressing of the blended elemental Ti–6%Al–7%Nb alloy

840

Microstructural evolution during hydrogen sorption cycling of Mg–FeTi nanolayered composites Original Research Article

841

Microstructural evolution during initial stages of static recovery and recrystallization: new insights from in-situ heating experiments combined with electron backscatter diffraction analysis

842

Microstructural evolution during isothermal aging and strain-induced transformation followed by isothermal aging in Co-Cr-Mo-C alloy: A comparative study

843

Microstructural evolution during low cycle fatigue of a 3003 aluminum alloy

844

Microstructural evolution during low cycle fatigue of a 3003 aluminum alloy

845

Microstructural evolution during low temperature sorption cycling of Mg-AlTi multilayer nanocomposites

846

Microstructural evolution during monotonic and reverse shearing of AA5182 aluminium alloy

847

Microstructural evolution during monotonic and reverse shearing of AA5182 aluminium alloy

848

Microstructural evolution during multiaxial deformation of pseudoelastic NiTi studied by first-principles-based micromechanical modeling Original Research Article

849

Microstructural evolution during nitriding, finite element simulation and experimental assessment

850

Microstructural evolution during partial remelting of AlSi7Mg alloys

851

Microstructural evolution during partial remelting of AlSi7Mg alloys

852

Microstructural evolution during powder metallurgical processing of a Ni3Si-based intermetallic alloy

853

Microstructural evolution during pressureless infiltration of aluminium alloy parts fabricated by selective laser sintering Original Research Article

854

Microstructural evolution during RAP process and deformation behavior of semi-solid SKD61 tool steel

855

Microstructural evolution during reactive brazing of alumina to Inconel 600 using Ag-based alloy Original Research Article

856

Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling Original Research Article

857

Microstructural evolution during recovery in Al–2.5%Mg alloys

858

Microstructural evolution during recovery in Al–2.5%Mg alloys

859

Microstructural evolution during reheating and tensile mechanical properties of thixoforged AZ91D-RE magnesium alloy prepared by squeeze casting–solid extrusion

860

Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy

861

Microstructural evolution during remelting of laser surface alloyed hyper-monotectic Al–Bi alloy

862

Microstructural evolution during rolling of Ti22Al23Nb sheet

863

Microstructural evolution during rolling of Ti22Al23Nb sheet

864

Microstructural evolution during scuffing of hardened 4340 steel—implication for scuffing mechanism

865

Microstructural evolution during simple heavy warm compression of a low carbon steel: Development of a processing map

866

Microstructural evolution during simulated OLAC processing of a low-carbon microalloyed steel

867

Microstructural evolution during simulated OLAC processing of a low-carbon microalloyed steel

868

Microstructural evolution during sintering in MgO powders precipitated from sea water under induced agglomeration conditions

869

Microstructural evolution during sintering of near-monosized agglomerate-free submicron alumina powder compacts Original Research Article

870

Microstructural evolution during sintering of TiO2/SiO2-doped alumina: mechanism of anisotropic abnormal grain growth Original Research Article

871

Microstructural evolution during solidification of austenitic stainless steel weld metals: A color metallographic and electron microprobe analysis study

872

Microstructural evolution during solution treatment of Co–Cr–Mo–C biocompatible alloys

873

Microstructural evolution during strain localization in dolomite aggregates

874

Microstructural evolution during superplastic bulge forming of Ti–6Al–4V alloy

875

Microstructural evolution during superplastic bulge forming of Ti–6Al–4V alloy

876

Microstructural evolution during tempering of a multiphase steel containing retained austenite

877

Microstructural evolution during tempering of a multiphase steel containing retained austenite

878

Microstructural evolution during tensile deformation of polypropylenes

879

Microstructural evolution during the combustion synthesis of TiC–Al cermet with larger metallic particles

880

Microstructural evolution during the dissolution of nickel in liquid aluminum under the influence of an electric field Original Research Article

881

Microstructural evolution during the formation of Ti3AlC2

882

Microstructural evolution during the infiltration of boron carbide with molten silicon

883

Microstructural evolution during the sintering of a Ti(C,N)Mo2CNi alloy

884

Microstructural evolution during the sintering of a Ti(C,N)Mo2CNi alloy

885

Microstructural evolution during the α2→α2+O transformation in Ti–Al–Nb alloys: phase-field simulation and experimental validation Original Research Article

886

Microstructural evolution during the δ/σ/γ phase transformation of the SUS 309LSi stainless steel after aging under various nitrogen atmospheric ratios

887

Microstructural evolution during thermal stabilization of PAN fibers

888

Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni–Si–B filler metal

889

Microstructural evolution during transient liquid phase bonding of Inconel 738LC using AMS 4777 filler alloy

890

Microstructural evolution in 13Cr–8Ni–2.5Mo–2Al martensitic precipitation-hardened stainless steel

891

Microstructural evolution in 13Cr–8Ni–2.5Mo–2Al martensitic precipitation-hardened stainless steel

892

Microstructural evolution in 8 mol% Y2O3-stabilized cubic zirconia (8YSCZ) with SiO2 addition

893

Microstructural evolution in 8 mol% Y2O3-stabilized cubic zirconia (8YSCZ) with SiO2 addition

894

Microstructural evolution in 8 mol% Y2O3-stabilized cubic zirconia (8YSCZ) with SiO2 addition

895

Microstructural evolution in a 5024 aluminum alloy processed by ECAP with and without back pressure

896

Microstructural evolution in a commercial low carbon steel by equal channel angular pressing Original Research Article

897

Microstructural evolution in a Cu–Zr alloy processed by a combination of ECAP and HPT

898

Microstructural evolution in a new 770 MPa hot rolled Nb–Ti microalloyed steel

899

Microstructural evolution in a new 770 MPa hot rolled Nb–Ti microalloyed steel

900

Microstructural evolution in a Ni–Cr–Co based superalloy during cooling from the melt

901

Microstructural evolution in a PH13-8 stainless steel after ageing Original Research Article

902

Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing

903

Microstructural evolution in a two-phase alloy processed by high-pressure torsion Original Research Article

904

Microstructural evolution in adiabatic shear band in the ultrafine-grained austenitic stainless steel processed by multi-axial compression

905

Microstructural evolution in adiabatic shear bands in Ta and Ta–W alloys Original Research Article

906

Microstructural evolution in adiabatic shear bands of copper at high strain rates: Electron backscatter diffraction characterization

907

Microstructural evolution in adiabatic shear localization in stainless steel Original Research Article

908

Microstructural evolution in AISI 304 stainless steel during directional solidification and subsequent solid-state transformation

909

Microstructural evolution in aluminium alloy 7050 during processing

910

Microstructural evolution in aluminium alloy 7050 during processing

911

Microstructural evolution in aluminium alloy 7050 during processing

912

Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion

913

Microstructural evolution in an aluminum solid solution alloy processed by ECAP

914

Microstructural evolution in austenitic heat-resistant cast steel 35Cr25Ni12NNbRE during long-term service

915

Microstructural evolution in commercial purity aluminum during high-pressure torsion

916

Microstructural evolution in copper processed by severe plastic deformation

917

Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis Original Research Article

918

Microstructural evolution in decomposition of amorphous Zr41Ti14Cu12.5Ni10Be22.5 alloy, as investigated by small-angle neutron scattering

919

Microstructural evolution in decomposition of amorphous Zr41Ti14Cu12.5Ni10Be22.5 alloy, as investigated by small-angle neutron scattering

920

Microstructural evolution in external callus of human long bone

921

Microstructural evolution in Fe and Fe–Cr model alloys after He+ ion irradiations

922

Microstructural evolution in friction stir welding of high-strength linepipe steel

923

Microstructural evolution in high power laser cladding of Stellite 6+WC layers

924

Microstructural evolution in high purity aluminum processed by ECAP

925

Microstructural evolution in irradiated uranium-bearing delta-phase oxides A6U1O12 (A = Y, Gd, Ho, Yb, and Lu)

926

Microstructural evolution in laser deposited compositionally graded α/β titanium-vanadium alloys Original Research Article

927

Microstructural evolution in laser deposited Ni–25at.% Mo alloy

928

Microstructural evolution in laser deposited Ni–25at.% Mo alloy

929

Microstructural evolution in mechanically alloyed Al-heavy-metal oxide composites

930

Microstructural evolution in medium copper low alloy steels irradiated in a pressurized water reactor and a material test reactor

931

Microstructural evolution in MgOp/AlN composites

932

Microstructural evolution in modified 9Cr–1Mo ferritic/martensitic steel irradiated with mixed high-energy proton and neutron spectra at low temperatures

933

Microstructural evolution in MSnO3 ceramics derived via self-heat-sustained (SHS) reaction technique

934

Microstructural evolution in nanocrystalline Y–TZP containing a silicate glass

935

Microstructural Evolution in Nd2Fe14B/α-Fe Bearing Zr-Nb Nanocomposite Magnet Original Research Article

936

Microstructural evolution in nickel alloy C-276 after Ar-ion irradiation at elevated temperature

937

Microstructural evolution in NiTi alloy subjected to surface mechanical attrition treatment and mechanism

938

Microstructural Evolution in Orthotropic Elastic Media

939

Microstructural evolution in passivated Al films on Si substrates during thermal cycling Original Research Article

940

Microstructural evolution in pure aluminum processed by high-pressure torsion

941

Microstructural evolution in recrystallized and unrecrystallized Al–Mg–Sc alloys during superplastic deformation

942

Microstructural evolution in semi-solid AA7034

943

Microstructural evolution in silica aerogel

944

Microstructural evolution in sol–gel derived P2O5-doped cordierite powders

945

Microstructural evolution in spray-formed and melt-spun Al85Nd5Ni10 bulk hybrid composites

946

Microstructural evolution in T24, a modified 2(1/4)Cr–1Mo steel during creep after different heat treatments

947

Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper

948

Microstructural evolution in the partial transient liquid phase diffusion bonding of Zircaloy-4 to stainless steel 321 using active titanium filler metal

949

Microstructural evolution in the phase mixtures of Ti(C,N)–Mo at 1600°C

950

Microstructural evolution in the phase mixtures of Ti(C,N)–Mo at 1600°C

951

Microstructural evolution in the pseudoelastic cycling of Cu–Zn–Al single crystals: behavior at a transition stage

952

Microstructural evolution in the pseudoelastic cycling of Cu–Zn–Al single crystals: behavior at a transition stage

953

Microstructural evolution in thermally sprayed WC–Co coatings: comparison between nanocomposite and conventional starting powders Original Research Article

954

Microstructural evolution in tungsten and copper probes under hydrogen irradiation at ISTTOK

955

Microstructural evolution in twin roll cast AA3105 during homogenization

956

Microstructural evolution in twin-roll strip cast Mg–Zn–Mn–Al alloy

957

Microstructural evolution in two-phase solids: morphological stability of near-periodic particle arrangements

958

Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behavior

959

Microstructural evolution in zirconium based alloys

960

Microstructural evolution kinetics after plastic deformation of equiatomic Ti–Ni alloy during isothermal annealings

961

Microstructural evolution kinetics after plastic deformation of equiatomic Ti–Ni alloy during isothermal annealings

962

Microstructural evolution kinetics after plastic deformation of equiatomic Ti–Ni alloy during isothermal annealings

963

Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation

964

Microstructural evolution of 304 stainless steel during mechanical milling

965

Microstructural evolution of 304 stainless steel during mechanical milling

966

Microstructural evolution of 7 wt.% Y2O3–ZrO2 thermal barrier coatings due to stress relaxation at elevated temperatures and the concomitant changes in thermal conductivity

967

Microstructural evolution of 7075 Al gas atomized powder and high-pressure cold sprayed deposition

968

Microstructural evolution of 9Cr–1Mo deposited metal subjected to weld heating

969

Microstructural evolution of a carbon modified single crystal Ni-base superalloy

970

Microstructural evolution of a commercial ultrafine alumina powder densified by different methods

971

Microstructural evolution of a delta containing nickel-base superalloy during heat treatment and isothermal forging

972

Microstructural evolution of a eutectic Al–Si engine subjected to severe running conditions

973

Microstructural evolution of a heavily cold-rolled CuCr in situ metal matrix composite

974

Microstructural evolution of a heavily cold-rolled CuCr in situ metal matrix composite

975

Microstructural evolution of a hot-rolled Ti–40Al–10Nb alloy

976

Microstructural evolution of a hot-rolled Ti–40Al–10Nb alloy

977

Microstructural evolution of a MCrAlY coating upon isothermal annealing

978

Microstructural evolution of a Ni-based superalloy (617B) at 700 °C studied by electron microscopy and atom probe tomography Original Research Article

979

Microstructural evolution of a NiCoCrAlY coating on an IN100 substrate

980

Microstructural evolution of a Ti-4.5Al-3Mo-1V alloy during hot working

981

Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing

982

Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing

983

Microstructural evolution of a Ti–6Al–4V alloy during β-phase processing: experimental and simulative investigations

984

Microstructural evolution of a Ti–6Al–4V alloy during β-phase processing: experimental and simulative investigations

985

Microstructural evolution of A356.2 alloy prepared by the SIMA process

986

Microstructural evolution of aged heat-resistant cast steel following strain controlled fatigue

987

Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process

988

Microstructural evolution of Alloy 690 during sensitization at 700 °C

989

Microstructural evolution of Alloy 718 at high helium and hydrogen generation rates during irradiation with 600–800 MeV protons

990

Microstructural evolution of allylamine polymerized plasma films

991

Microstructural evolution of Al–Zn–Mg–Cu–(Sc) alloy during hot extrusion and heat treatments

992

Microstructural evolution of amorphous cobalt-rich magnetic alloys during magnetic field annealing

993

Microstructural evolution of amorphous cobalt-rich magnetic alloys during magnetic field annealing

994

Microstructural evolution of an Al67Mn8Ti24Nb1 alloy during mechanical milling and subsequent annealing process

995

Microstructural evolution of an Al67Mn8Ti24Nb1 alloy during mechanical milling and subsequent annealing process

996

Microstructural evolution of an ECAE-formed ZK60-RE magnesium alloy in the semi-solid state

997

Microstructural evolution of an incipient fault zone in Opalinus Clay: Insights from an optical and electron microscopic study of ion-beam polished samples from the Main Fault in the Mt-Terri Underground Research Laboratory

998

Microstructural evolution of ball-milled Mg–Ni powder during hydrogen sorption

999

Microstructural evolution of both as-irradiated and subsequently deformed microstructures of 316 L stainless steel irradiated at 30–160 °C at LANSCE

1000

Microstructural evolution of buffers

بازگشت