<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Frequency sweeping Alfvén instabilities driven by super-Alfvénic beams in the spherical tokamak START
2
Frequency sweeping process on cyclotron resonance cooling
3
Frequency sweeping process on cyclotron resonance cooling
4
Frequency synchronization and phase agreement in Kuramoto oscillator networks with delays
5
Frequency synchronization for digital audio broadcasting
6
Frequency synchronization in global satellite communications systems
7
Frequency synthesis by phase lock, 2nd ed. [Book Review]
8
Frequency trajectory effects in Chinese character recognition: Evidence for the arbitrary mapping hypothesis
9
Frequency transitions in synchronized neural networks
10
Frequency trimming of a vibrating ring-based multi-axis rate sensor
11
Frequency tunable metallo-dielectric structure for backscattering reduction
12
Frequency tuning of individual auditory receptors in female mosquitoes (Diptera, Culicidae)
13
Frequency upconversion emissions in layered lead–germanate–tellurite glasses for three-color display
14
Frequency upconversion in Er3+ doped Y2O3 nanophosphor:Yb3+ sensitization and tailoring effect of Li+ ion
15
Frequency upconversion involving quartets of ions in a Pr3+/Eu3+ oxyfluoroborate glass
16
Frequency upconversion of Tm3+ and Yb3+ codoped YLiF4 synthesized by hydrothermal method
17
Frequency upconversion properties of Er3+/Yb3+-codoped lead–germanium–bismuth oxide glasses
18
Frequency versus probability formats in statistical word problems
19
Frequency warping in time-domain circuit simulation
20
Frequency weighting derived from power absorption of fingers–hand–arm system under zh-axis vibration
21
Frequency width in predictions of windsea spectra and the role of the nonlinear solver
22
Frequency, antimicrobial susceptibility and plasmid profiles of Escherichia coli pathotypes obtained from children with acute diarrhea
23
Frequency, antimicrobial susceptibility and plasmid profiles of Escherichia coli pathotypes obtained from children with acute diarrhea
24
Frequency, Associated Factors, Clinical Symptoms, and Subtypes of Blastocystis sp. in Patients With Irritable Bowel Syndrome and Healthy Individuals: A Case-Control Study
25
Frequency, Bacteriological Profile, and Outcome of Neonatal Sepsis with Carbapenem-Resistant Gram-Negative Bacteria at the Tertiary Neonatal Intensive Care Unit, Ahvaz, Iran
26
Frequency, biofilm formation and acid susceptibility of streptococcus mutans and streptococcus sobrinus in saliva of preschool children with different levels of caries activity
27
FREQUENCY, CAUSES AND OUTCOME OF POLYHYDRAMNIOS
28
FREQUENCY, CAUSES AND OUTCOME OF POST PARTUM HAEMORRHAGE AT LIAQAT MEMORIAL HOSPITAL KOHAT, PAKISTAN
29
Frequency, Causes, and Findings of Brain CT Scans of Neonatal Seizure at Besat Hospital, Hamadan, Iran
30
Frequency, causes, and outcomes of trauma in patients referred to the emergency department of Ali Ibn Abitaleb hospital, Rafsanjan, Iran, in 2021
31
Frequency, Causes, and Places of Unintentional Injuries in a Nationally Representative Sample of Iranian Children and Adolescents: The CASPIAN‑IV Study
32
Frequency, characteristics and risk factors of Carotid Artery Stenosis in ischaemic stroke patients at Civil Hospital Karachi
33
Frequency, characteristics, and child and parent risk factors for nonfatal injury in rural children
34
Frequency, characteristics, and outcome of patients hospitalized with acute coronary syndromes with undetermined electrocardiographic patterns
35
Frequency, clinical characteristics and outcome of diabetic ketoacidosis in children with type-1 diabetes at a tertiary care hospital
36
Frequency, Clinical Presentation and Microbiological Spectrum of Candidemiain a Tertiary Care Center in Karachi, Pakistan
37
Frequency, Comorbidity, and Psychosocial Impairment of Anxiety Disorders in German Adolescents
38
Frequency, correlates, and clinical implications of myocardial perfusion after primary angioplasty and stenting, with and without glycoprotein IIb/IIIa inhibition, in acute myocardial infarction Original Research Article
39
Frequency, Determinants and Prognostic Implications of Infectious Complications After Transcatheter Aortic Valve Implantation
40
Frequency, determinants, and clinical implications of residual intracoronary thrombus following primary angioplasty for acute myocardial infarction
41
Frequency, Determinants, and Clinical Relevance of Acute Coronary Syndrome-Like Electrocardiographic Findings in Patients With Acute Aortic Syndrome
42
Frequency, Duration, and Predictors of Newly-Diagnosed Atrial Fibrillation Following Dual-Chamber Pacemaker Implantation in Patients Without a Previous History of Atrial Fibrillation
43
Frequency, duration, magnitude, and consequences of myocardial ischemia during intracoronary ultrasonography, ,
44
Frequency, electrical conductivity and temperature analysis of a low-cost capacitance soil moisture sensor
45
Frequency, Etiology and Several Socio-demographic Characteristics of Acute Poisoning in Children Treated in the Intensive Care Unit
46
Frequency, Etiology and Several Socio-demographic Characteristics of Acute Poisoning in Children Treated in the Intensive Care Unit
47
Frequency, Etiology, Treatment, and Outcomes of Drug-Eluting Stent Thrombosis During One Year of Follow-Up
48
Frequency, hematopathology, and detection of a new isodicentric variant of deletion 20q
49
Frequency, Levels and Predictors of Potential Drug-Drug Interactions in a Pediatrics Ward of a Teaching Hospital in Pakistan
50
Frequency, manifestations, and correlates of impaired healing of saphenous vein harvest incisions
51
FREQUENCY, MATERNAL AND FETAL OUTCOME OF ABRUPTIO PLACENTA IN A RURAL MEDICAL COLLEGE HOSPITAL, MIRPURKHAS SINDH
52
Frequency, Mechanisms, and Implications of Late Peri-Stent Contrast Staining: Analysis (from the HORIZONS-AMI Trial)
53
Frequency, moisture and temperature-dependent dielectric properties of chickpea flour
54
Frequency, ordinal position and semantic distance as measures of cross-cultural stability and hierarchies for action verbs
55
Frequency, Origin, and Outcome of Ventricular Premature Complexes in Patients With or Without Heart Diseases
56
Frequency, patient characteristics, and outcomes of mild-to-moderate heart failure complicating ST-segment elevation acute myocardial infarction: Lessons from 4 international fibrinolytic therapy trials
57
Frequency, Patient Characteristics, Treatment Strategies, and Resource Usage of Atrial Fibrillation (from the Italian Survey of Atrial Fibrillation Management [ISAF] Study)
58
Frequency, Pattern, and Cause of Fever Following Transfemoral Transcatheter Aortic Valve Implantation
59
Frequency, power and temperature dependence of the off-resonance magnetoresistance spike in irradiated 2D-electron systems
60
Frequency, Predictors, and Appropriateness of Blood Transfusion After Percutaneous Coronary Interventions
61
Frequency, predictors, and consequences of atrioventricular block after mitral valve repair
62
Frequency, Predictors, and Outcomes of Drug-Eluting Stent Utilization in Patients With High-Risk Non–ST-Segment Elevation Acute Coronary Syndromes
63
Frequency, Probability, and Prediction: Easy Solutions toCognitive Illusions?,
64
Frequency, risk factors, and clinical outcomes of left ventricular assist device-associated ventricular thrombus
65
Frequency, Risk Factors, and Outcome for Bacteremia After Percutaneous Transluminal Coronary Angioplasty
66
Frequency, Risk Factors, and Outcome of Acute Kidney Injury Following Bone Marrow Transplantation at Dr Shariati Hospital in Tehran
67
Frequency, severity and determinants of functional limitations in older adults with joint pain and comorbidity: Results of a cross-sectional study
68
Frequency, severity and risk indicators of retinopathy in patients with diabetes screened by fundus photographs: A study from primary health care
69
Frequency, Severity and Types of Aggressive Behavior among Patients with Schizophrenia at Psychiatry Outpatients Clinic in Comparison to Normal Controls
70
Frequency, severity, and duration of rhinovirus infections in asthmatic and non-asthmatic individuals: a longitudinal cohort study
71
Frequency, Severity, Rate, and Causes of Moral Distress among Nursing Students: A Cross-Sectional Study
72
Frequency, significance, and cost of recurrent ischemia after thrombolytic therapy for acute Myocardial Infarction
73
Frequency, Size and Location of Apical and Lateral Foramina in Anterior Permanent Teeth
74
Frequency, temperature and In3+ dependent electrical conduction in NiFe2O4 powder
75
Frequency, Temperature and Moisture Dependent Dielectric Properties of Chicken Manure Relevant to Radio frequency/Microwave Drying
76
Frequency, thermal and voltage supercapacitor characterization and modeling
77
Frequency, Type and Causes of Medication Errors in Pediatric Wards of Hospitals in Yazd, the Central of Iran
78
Frequency, Types and Indications of Coronary Angiography in Patients with Coronary Artery Ectasia
79
Frequency, virulence genes and antimicrobial resistance of Listeria spp. isolated from bovine clinical mastitis
80
Frequency-based adaptive control of systems with antiresonance modes
81
Frequency-based characterization of liquid–solid fluidized bed hydrodynamics using the analysis of vibration signature and pressure fluctuations
82
Frequency-based current-sharing techniques for paralleled power converters
83
Frequency-based fatigue analysis of non-stationary switching random loads
84
Frequency-based load shedding over a data stream of tuples
85
Frequency-based method for fast-response reserve dispatch in isolated power systems
86
Frequency-Based Optimization Design for Fractional Delay FIR Filters with Software-Defined Radio Applications
87
Frequency-based similarity for parameterized sequences: Formal framework, algorithms, and applications
88
Frequency-based structural modification for the case of base excitation
89
Frequency-based views to pattern collections Original Research Article
90
Frequency-controllable electric field distribution in colloidal crystals
91
Frequency-controlled wave focusing by a sonic crystal lens
92
Frequency-conversion properties of Eu3+ doped chlorophosphate glass ceramics containing CaCl2 nanocrystals
93
Frequency-dependence of internal friction peak associated with phase transition of liquid crystal carboxylate
94
Frequency-dependence of internal friction peak associated with phase transition of liquid crystal carboxylate
95
Frequency-dependence of Myocardial Energetics in Failing Human Myocardium as Quantified by a New Method for the Measurement of Oxygen Consumption in Muscle Strip Preparations
96
Frequency-dependent Acceleration of Relaxation in the Heart Depends on CaMKII, but not Phospholamban
97
Frequency-Dependent Amplification of Unsaturated Surface Soil Layer
98
Frequency-dependent anisotropy: Effects of multiple fracture sets on shear-wave polarizations
99
Frequency-dependent atmospheric pressure admittance of superconducting gravimeter records using least squares response method
100
Frequency-dependent Attenuation of High-frequency P and S Waves in the Upper Crust in Western Nagano, Japan
101
Frequency-dependent baroreflex control of blood pressure and heart rate during physical exercise
102
Frequency-Dependent Bulk Viscosity in One- And Two-Component Near-Critical Fluids
103
Frequency-dependent C(V) spectroscopy of the hole system in InAs quantum dots
104
Frequency-dependent Changes in Contribution of SR Ca2+to Ca2+Transients in Failing Human Myocardium Assessed with Ryanodine
105
Frequency-dependent changes in neuromuscular responses to cyclic lumbar flexion
106
Frequency-dependent conductivity and dielectric permittivity of emeraldine base and weakly doped poly(o-toluidine)
107
Frequency-dependent conductivity and dielectric studies on LixV2O5 (x=0.6–1.6)
108
Frequency-dependent conductivity in As2Se3 and As2Te3 thin films
109
Frequency-dependent conductivity in tris(acetylacetonato)manganese(III) thin films on Si(1 0 0) substrates
110
Frequency-dependent dielectric characteristics of ferroelectric SrBi2Nb2O9 ceramics
111
Frequency-dependent distributed-parameter modelling of counterpoise by time-domain fitting
112
Frequency-dependent electrophysiologic properties of ventricular repolarization in patients with congenital long QT syndrome
113
Frequency-Dependent Elongational Viscosity by Nonequilibrium Molecular Dynamics
114
Frequency-dependent equivalent circuit for the representation of synchronous machines
115
Frequency-dependent error bounds for uncertain linear models
116
Frequency-dependent extinction cross section of a spherical ion or metallic cluster immersed in a plasma
117
Frequency-dependent first hyperpolarizabilities using coupled cluster quadratic response theory
118
Frequency-dependent food selection in locusts: a geometric analysis of the role of nutrient balancing
119
Frequency-dependent grounding system calculation by means of a conventional nodal analysis technique
120
Frequency-dependent Hall effect in spintronic systems under zero magnetic field
121
Frequency-dependent heat transfer enhancement from rectangular heated block array in a pulsating channel flow
122
Frequency-dependent hyperpolarizabilities in the coupled-cluster method: the Kerr effect for molecules
123
Frequency-dependent Increase in Cardiac Ca2+Current is due to Reduced Ca2+Release by the Sarcoplasmic Reticulum
124
Frequency-dependent interpolation rules using first derivatives for oscillatory functions
125
Frequency-Dependent Lg Q within the Continental United States
126
Frequency-dependent localization length of SH-wave in randomly disordered piezoelectric phononic crystals
127
Frequency-dependent losses on high-performance interconnections
128
Frequency-dependent microstructural characteristics and corrosion behavior of oxide coatings on Ti-6Al-4V alloy fabricated by plasma electrolytic oxidation
129
Frequency-Dependent Modeling of Power Transformers With Ungrounded Windings
130
Frequency-dependent performance of an endoreversible Carnot engine with a linear phenomenological heat-transfer law
131
Frequency-dependent polarizabilities and first hyperpolarizabilities of CO and H2O from coupled cluster calculations
132
Frequency-dependent Qf value of low-loss Ba2Ti9O20 ceramics at microwave frequencies
133
Frequency-Dependent Resistance in Litz-Wire Planar Windings for Domestic Induction Heating Appliances
134
Frequency-dependent response in ITO/Alq3/Al organic light-emitting diodes
135
Frequency-dependent response properties of adapting spiking neurons
136
Frequency-dependent second hyperpolarizabilities using coupled cluster cubic response theory
137
Frequency-dependent selection in a periodic environment
138
Frequency-dependent Selection in Sexual Family-structured Populations
139
Frequency-Dependent Selection: a Two-Phenotype, Two-Allele, Single-Locus, Two-Species Diploid Model
140
Frequency-dependent shear wave splitting and heterogeneous anisotropic structure beneath the Gulf of California region
141
Frequency-dependent shear wave splitting beneath the Japan and Izu-Bonin subduction zones
142
Frequency-dependent Shear-wave Q Models for the Crust of China and Surrounding Regions
143
Frequency-dependent signals in multi-centennial oak vessel data
144
Frequency-Dependent Stability for Two-Species Interactions
145
Frequency-dependent strain–life characteristics of Sn1.0Ag0.1Cu solder on cupper pad at high cyclic frequency
146
Frequency-dependent transformation matrices for untransposed transmission lines using Newton-Raphson method
147
Frequency-dependent transmission line modeling utilizing transposed conditions
148
Frequency-dependent vibrational population relaxation time of the OH stretching mode in liquid water
149
Frequency-dependent, bi-directional plasticity in motor cortex of human adults
150
Frequency-distance constraints with large distances Original Research Article
151
Frequency-domain adaptation of causal digital filters
152
FREQUENCY-DOMAIN ANALYSES OF NONLINEARLY LOADED ANTENNA ARRAYS USING SIMULATED ANNEALING ALGORITHMS
153
Frequency-domain analysis of earthquake input energy to structure–pile systems
154
Frequency-domain analysis of exponentially damped linear systems
155
Frequency-domain analysis of hydrogen permeation across Pd77Ag23 metallic membranes
156
Frequency-Domain Analysis of Linear Time-Periodic Systems .
157
Frequency-domain analysis of non-linear wave effects on offshore platform responses
158
Frequency-domain analysis of non-Newtonian fluid behavior in head-disk interface lubrication
159
Frequency-domain analysis of three-phase linear current regulators
160
Frequency-domain analysis of time-integration methods for semidiscrete finite element equations - part I: Parabolic problems
161
Frequency-domain analysis of time-integration methods for semidiscrete finite element equations - part II: Hyperbolic and parabolic-hyperbolic problems
162
Frequency-domain and time-domain finite-element solution of Maxwellʹs equations using spectral Lanczos decomposition method Original Research Article
163
Frequency-domain approach to robust PI control
164
Frequency-Domain Blind Deconvolution Based on Mutual Information Rate
165
Frequency-domain characterization of heat conduction in sealed water calorimeters
166
Frequency-domain characterization of heat conduction in sealed water calorimeters
167
Frequency-domain conditions for disturbance rejection and decoupling with stability or pole placement
168
FREQUENCY–DOMAIN CRITERIA FOR CORRELATING AND UPDATING DYNAMIC FINITE ELEMENT MODELS
169
Frequency-domain delayless active sound quality control algorithm
170
Frequency-domain design of pid controllers for stable and unstable systems with time delay
171
Frequency-domain EBIC method for mapping of noise and instability regions in semiconductor devices
172
Frequency-domain electric birefringence spectra of conducting polymers
173
Frequency-domain fatigue analysis of wide-band stationary Gaussian processes using a trimodal spectral formulation
174
Frequency-domain generalized total least-squares identification for modal analysis
175
Frequency-domain gratings by simultaneous absorption of two photons
176
Frequency-Domain GTLS Identification Combined with Time-Frequency Filtering for Flight Flutter Modal Parameter Identification
177
Frequency-domain identification of continuous-time ARMA models from sampled data
178
Frequency-domain identification of linear systems using arbitrary excitations and a nonparametric noise model
179
Frequency-domain identification: An algorithm based on an adaptive rational orthogonal system
180
Frequency-domain maximum likelihood estimation for automatic speech recognition in additive and convolutive noises
181
Frequency-domain Method for 2 Optimization of Time-delayed Sampled-data Systems
182
Frequency-domain method for discrete frequency noise prediction of rotors in arbitrary steady motion
183
Frequency-domain methods for a vibration-fatigue-life estimation – Application to real data
184
Frequency-domain modelling of interharmonics in HVDC systems
185
Frequency-domain multiplex with eight-input SQUID and readout electronics over
186
Frequency-domain multiplex with eight-input SQUID and readout electronics over
187
Frequency-domain multiplexing development for high-count-rate microcalorimeters
188
Frequency-domain multiplexing development for high-count-rate microcalorimeters
189
Frequency-domain multiplexing of TES microcalorimeter array with CABBAGE
190
Frequency-domain multiplexing of TES microcalorimeter array with CABBAGE
191
Frequency-Domain Multiplexing System for in vivo Diffuse Light Measurements of Rapid Cerebral Hemodynamics
192
Frequency-Domain Optical Coherence Tomographic Analysis of Plaque Microstructures at Nonculprit Narrowings in Patients Receiving Potent Statin Therapy
193
Frequency-domain optimization for robust fault detection and isolation in dynamic systems
194
Frequency-domain phase fluorometry in the presence of dark states: A numerical study
195
Frequency-domain prediction of broadband trailing edge noise from a blunt flat plate
196
Frequency-domain prediction of turbofan noise radiation
197
Frequency-domain readout multiplexing of transition-edge sensor arrays
198
Frequency-domain readout multiplexing of transition-edge sensor arrays
199
Frequency-Domain Receivers for Rate-1 Space-Time Block Codes
200
Frequency-domain reflectometry for on-board testing of aging aircraft wiring
201
Frequency-domain regression method for estimating CTF models of building multilayer constructions
202
Frequency-Domain Set-Membership Filtering and Its Applications
203
Frequency-domain subspace identification using FRF data from arbitrary signals
204
Frequency-domain subspace system identification using non-parametric noise models
205
Frequency-domain synthesis of a filter using Viete root functions
206
Frequency-domain system identification using non-parametric noise models estimated from a small number of data sets
207
Frequency-domain transient analysis of nonuniform lines with incident field excitation
208
Frequency-domain-based switching median lter for the restoration of images corrupted with high-density periodic noise
209
Frequency-domain-coupled microstrip-line normal-mode parameter extraction from S-parameters
210
Frequency-emulated uniform cellular automata
211
Frequency–energy plots of steady-state solutions for forced and damped systems, and vibration isolation by nonlinear mode localization
212
Frequency-hopped multiple-access communications with noncoherent M-ary OFDM-ASK
213
Frequency-independent equivalent-circuit model for on-chip spiral inductors
214
FREQUENCY-INDEPENDENT INFINITE ELEMENTS FOR ANALYSING SEMI-INFINITE PROBLEMS
215
Frequency-locked and quasiperiodic (QP) oscillations in power systems
216
Frequency-locking of coupled oscillators driven by periodic forces and white noise
217
Frequency–magnitude distribution of debris flows compiled from global data, and comparison with post-fire debris flows in the western U.S.
218
Frequency–magnitude relationships for precipitation, stream flow and sediment load events in a small Mediterranean basin (Vallcebre basin, Eastern Pyrenees)
219
Frequency-Magnitude Relationships for seismic areas around the capital cities of Solomon, Vanuatu, Tonga and Fiji Islands
220
Frequency-matched cavity ring-down spectroscopy
221
Frequency-modulated cross-polarization for fast magic angle spinning NMR at high fields: relaxing the Hartmann-Hahn condition
222
Frequency-modulated stimulated Brillouin spectroscopy in high-refractive-index glasses
223
Frequency-multiplexed logic circuit based on a coherent optical neural network
224
Frequency-narrowed diode array bar
225
Frequency-Noise Relation of Mining Machines
226
Frequency–rank correlations of rhodopsin mutations with tuned hydropathic roughness based on self-organized criticality
227
Frequency-resolved absorption tomography with tunable diode lasers
228
Frequency-Response Analysis of Torsional Dynamics
229
Frequency-response characteristics and error estimation in RMS measurement
230
FREQUENCY-RESPONSE CHARACTERISTICS OF A SINGLE-LINK FLEXIBLE JOINT MANIPULATOR AND POSSIBLE TRAJECTORY TRACKING
231
Frequency-response-shaped LMS adaptive filter
232
Frequency-sampling filters: An improved model structure for step-response identification
233
Frequency-selective absorbance detection: Refractive index and turbidity compensation with dual-wavelength measurement
234
FREQUENCY-SELECTIVE NANOSTRUCTURED PLASMONIC ABSORBER BY HIGHLY LOSSY INTERFACE MODE
235
Frequency-selective quadrupolar MRI contrast
236
Frequency-selective single-photon detection with a double quantum dot
237
Frequency-shaping LQ control of Maglev suspension systems for optimal performance with deterministic and stochastic inputs
238
Frequency-shift based detection of BMS contrast agents using SSFP: potential for MRA
239
Frequency-shift-invariant orthonormal wavelet packet representations
240
Frequency-specific SSFP for hyperpolarized 13C metabolic imaging at 14.1 T
241
Frequency-stabilized cavity ring-down spectroscopy
242
Frequency-stabilized seed laser system for dial applications around 0.94 (mu)m
243
Frequency–temperature response of CaBi4Ti4O15 ceramic prepared by soft chemical route: Impedance and modulus spectroscopy characterization
244
Frequency-temperature scaling of the CV characteristics for irradiated Si detectors
245
Frequency-temperature scaling of the CV characteristics for irradiated Si detectors
246
Frequency-tripled Nd:YAG laser ablation in laser structuring process
247
Frequency-truncated system norms
248
Frequency-tunable terahertz electromagnetic wave emitters based on undoped GaAs/n-type GaAs epitaxial layer structures utilizing sub-picosecond-range carrier-transport processes
249
Frequency-uniform decomposition method for the generalized BO, KdV and NLS equations
250
Frequency–volume relation and prediction of rainfall-induced landslides
251
Frequency-warped filter banks and wavelet transforms: a discrete-time approach via Laguerre expansion
252
Frequency-weighted model reduction via quasi-Kalman decomposition
253
Frequent aberrations of chromosome 8 in aggressive B-cell non-Hodgkin lymphoma
254
Frequent accelerated idioventricular rhythm in a young male of Buergerʹs disease with acute myocardial infarction
255
Frequent addition of wheat straw residues to soil enhances carbon mineralization rate
256
Frequent addition of wheat straw residues to soil enhances carbon mineralization rate
257
Frequent allelic imbalances at 8p and 11q22 in oral and oropharyngeal epithelial dysplastic lesions
258
Frequent allelic loss of 21q11.1∼q21.1 region in advanced stage oral squamous cell carcinoma
259
Frequent allelic loss on chromosomes 4q and 16q associated with human hepatocellular carcinoma in Taiwan
260
Frequent allelic losses of 9p21 markers and low incidence of mutations at p16(CDKN2) gene in non-Hodgkin lymphomas of B-cell lineage
261
Frequent Alterations of Evolutionarily Conserved Regions of Chromosome 1 in Human Malignant Melanoma
262
Frequent Amplification of a chr19q13.41 MicroRNA Polycistron in Aggressive Primitive Neuroectodermal Brain Tumors
263
Frequent and occasional physical activity in the elderly: A 12-year follow-up study of mortality Original Research Article
264
Frequent and regular church attendance as a religiousritual: further investigation of the relationship betweenpublic aspects of religiosity and obsessional symptoms
265
Frequent association between trisomy 15 and t(8;21)(q22;q22) in acute myeloid leukemia
266
Frequent association with neurosurgical conditions in adult Proteus mirabilis meningitis: report of five cases
267
Frequent attacks on health workers in China: social changes or historical origins?
268
Frequent attendance in family practice and common mental disorders in an open access health care system
269
Frequent attender profiles: Different clinical subgroups among frequent attender patients in primary care
270
Frequent attenders in general practice care: A literature review with special reference to methodological considerations
271
Frequent attenders to an accident and emergency department
272
Frequent attenders to an emergency department: A study of primary health care use, medical profile, and psychosocial characteristics
273
Frequent attenders without organic disease in a gastroenterology clinic: Patient characteristics and health care use
274
FREQUENT BEHAVIORAL DELAY TENDENCIES BY ADULTS International Prevalence Rates of Chronic Procrastination
275
Frequent channel avulsions within the active channel–levee system of the middle Bengal Fan—an exceptional channel–levee development derived from Parasound and Hydrosweep data
276
Frequent c-Ha-ras gene mutations in rat mammary carcinomas induced by 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine
277
Frequent childhood geographic relocation: Its impact on drug use initiation and the development of alcohol and other drug-related problems among adolescents and young adults
278
Frequent chromosomal gains in recurrent juvenile nasopharyngeal angiofibroma
279
Frequent Chromosome 8q Gains in Human Small Cell Lung Carcinoma Detected by Arbitrarily Primed-PCR Genomic Fingerprinting
280
Frequent chromosome Y loss in primary, second primary and metastatic squamous cell carcinomas of the head and neck region
281
Frequent c-Kit gene mutations not only in gastrointestinal stromal tumors but also in interstitial cells of Cajal in surrounding normal mucosa
282
Frequent co-amplification of two different regions on 17q in aneuploid breast carcinomas
283
Frequent consulters in general practice: A systematic review of studies of prevalence, associations and outcome
284
Frequent Convulsive Seizures in an Adult Patient with COVID-19: A Case Report
285
Frequent detection and genotyping of human rhinovirus in SARS-CoV-2 negative patients; a study from south of Iran
286
Frequent Detection of Familial Hypercholesterolemia Mutations in Familial Combined Hyperlipidemia
287
Frequent detection of Human Herpes Virus-8 in bone marrow of Jordanian patients of multiple myeloma
288
Frequent dieting and the development of obesity among children and adolescents
289
Frequent DNA copy number changes in mantle cell lymphoma: Gain of 3q and loss of 11q22
290
Frequent ED users: Patterns of use over time
291
Frequent Emergency Department Use by Individuals Seeking Mental Healthcare: A Systematic Search and Review
292
Frequent emergency department use in Sweden: Implications for emergency medicine in the United States
293
Frequent Emergency Department Visitors: The End of Inappropriateness
294
Frequent Engagement of the Classical and Alternative NF-κB Pathways by Diverse Genetic Abnormalities in Multiple Myeloma
295
Frequent epigenetic inactivation of chromosome 3p candidate tumor suppressor genes in gallbladder carcinoma
296
Frequent epigenetic inactivation of p53 target genes in seminomatous and nonseminomatous germ cell tumors
297
Frequent Evaluation of Herpes Simplex Virus Type 2 in Women with Genital Herpes by Realtime PCR
298
Frequent factors for women and children subjected to sexual assaults presenting at Jinnah Postgraduate Medical center, Karachi
299
Frequent feeding delays the gastric emptying of a subsequent meal
300
Frequent FHIT gene loss of heterozygosity in human papillomavirus-infected non-smoking female lung cancer in Taiwan
301
Frequent fires intensify soil crusting: physicochemical feedback in the pedoderm of long-term burn experiments in South Africa
302
Frequent Flyer Program: a case study of China airlineʹs marketing initiative—Dynasty Flyer Program
303
Frequent flyer programs for European low-cost airlines: Prospects, risks and implementation guidelines
304
Frequent frames as a cue for grammatical categories in child directed speech
305
Frequent gain of copy number on the long arm of chromosome 3 in human cervical adenocarcinoma
306
Frequent Hypomethylation in Wilms Tumors of Pericentromeric DNA in Chromosomes 1 and 16
307
Frequent inactivation of RASSF1A, BLU, and SEMA3B on 3p21.3 by promoter hypermethylation and allele loss in non-small cell lung cancer
308
Frequent infection of peripheral blood CD8-positive T-lymphocytes with HIV-1
309
Frequent issuers’ influence on long-run post-issuance returns
310
Frequent Itemsets Mining: An Efficient Graphical Approach
311
Frequent job change and associated health
312
Frequent landslides from Koolau Volcano: Results from ODP Hole 1223A
313
Frequent loss expression of dab2 and promotor hypermethylation in human cancers: A meta-analysis and systematic review
314
Frequent Loss of 9p21 (p16INK4A) and Other Genomic Imbalances in Human Malignant Fibrous Histiocytoma
315
Frequent loss of chromosome 3p and hypermethylation of RASSF1A in cholangiocarcinoma
316
Frequent loss of heterozygosity at chromosome 3p14-2-3p21 in human pancreatic islet cell tumours
317
Frequent loss of heterozygosity in chromosomal region 9pter-p13 in tumor biopsies and cytological material of uterine cervical cancer
318
Frequent loss of heterozygosity of chromosome 3 short arm detected by PCR-based microsatellite polymorphisms in cervical squamous cell carcinoma
319
Frequent loss of heterozygosity on chromosome 9 in Chinese esophageal squamous cell carcinomas
320
Frequent loss of heterozygosity on chromosomes 4, 12 and 19 in radiation-induced lymphomas in mice
321
Frequent loss of heterozygosity on multiple chromosomes in Chinese esophageal squamous cell carcinomas
322
Frequent loss of p53 codon 72 Pro variant in hepatitis C virus-positive carriers with hepatocellular carcinoma
323
Frequent low expression of chromatin remodeling gene ARID1A in breast cancer and its clinical significance
324
Frequent multiplication of chromosomal region 8q24.1 associated with aggressive histologic types of breast cancers
325
Frequent multiplication of chromosome 1q in non-invasive and papillotubular carcinoma of the breast
326
Frequent mutation related with overexpression of DNA polymerase beta in primary tumors and precancerous lesions of human stomach
327
Frequent mutations in the mitochondrial control region DNA in breast tissue
328
Frequent mutations of Ki-ras codon 12 in N-bis(2-hydroxypropyl)-nitrosamine-initiated thyroid, kidney and lung tumors in Wistar rats
329
Frequent Needle Exchange Use and HIV Incidence in Vancouver, Canada
330
Frequent Novel Variations Within MSH2 and MLH1 Genes in a Subset of Iranian Families With Hereditary NonPolyposis Colorectal Cancer
331
Frequent nucleation events at the high altitude station of Chacaltaya (5240 m a.s.l.), Bolivia
332
Frequent nurse visits decrease white coat effect in stage III hypertension
333
Frequent occurrence of apoptosis is not associated with pathogenic infectious pancreatic necrosis virus (IPNV) during persistent infection
334
Frequent Occurrence of Pandemics: The Need to Change the Family Emergency Kit and First Aid Kits of the DAVAAM Group
335
Frequent oscillatory criteria forpartial difference equations with several delays
336
Frequent oscillatory solutions of a nonlinear partial difference equation
337
Frequent overexpression of cyclin D2/cyclin-dependent kinase 4 in Wilmsʹ tumor
338
Frequent Oversizing during Amplatzer Device Deployment for Percutaneous PDA Closures
339
Frequent paracetamol use linked to asthma
340
Frequent price changes under menu costs
341
Frequent ras gene mutations in squamous cell cervical cancer
342
Frequent rearrangements and amplification of the CDX2 homeobox gene in human sporadic colorectal cancers with chromosomal instability
343
Frequent Recurrences of Genital Herpes Are Associated with Enhanced Systemic HSV-Specific T Cell Response
344
Frequent reocclusion of patent infarct-related arteries between 4 weeks and 1 year: Effects of antiplatelet therapy
345
Frequent respiratory tract infections in the canine model of X-linked ectodermal dysplasia are not caused by an immune deficiency
346
Frequent respiratory tract infections in the canine model of X-linked ectodermal dysplasia are not caused by an immune deficiency
347
Frequent Snacks Improved Energy Intake and Nutritional Status in Community-Dwelling Older Adults at Risk of Malnutrition, Chiang Mai, Thailand
348
Frequent Spinal Anesthesia in a Patient with Traumatic Lower Extremity Injury: A Case Report
349
Frequent stepping on and off the footstool contaminates the operative field
350
Frequent Symptom Sets Identification from Uncertain Medical Data in Differentially Private Way
351
Frequent Term Based Clustering of Stories with Semantic Analysis for Searching and Retrieval
352
Frequent use of the hospital emergency department is indicative of high use of other health care services
353
Frequent Users of Massachusetts Emergency Departments: A Statewide Analysis
354
Frequent users of pornography. A population based epidemiological study of Swedish male adolescents
355
Frequent Verb Errors of Chinese Students and Principal Reasons
356
Frequential and temporal analysis of two-dimensional photonic crystals for absorption enhancement in organic solar cells
357
Frequentist evaluation of intervals estimated for a binomial parameter and for the ratio of Poisson means
358
Frequentist evaluation of intervals estimated for a binomial parameter and for the ratio of Poisson means
359
Frequentist Performance of Bayesian Confidence Intervals for Comparing Proportions in 2 × 2 Contingency Tables
360
Frequentist properties of a Bayesian analog to Fabianʹs bound
361
Frequently Asked Questions About Rule of Law Assistance (And Why Better Answers Matter)
362
Frequently observed parasites in pet reptiles’ feces in Tehran
363
Frequently published scholars and educational backgrounds
364
Frequently Recurrent Takotsubo Syndrome in COPD
365
Frequently visited sets for random walks
366
Frequent-wildfires with shortened time-since-fire affect soil microbial functional stability to drying and rewetting events
367
Frequent-wildfires with shortened time-since-fire affect soil microbial functional stability to drying and rewetting events
368
FRESCO, a simplified code for cost analysis of fusion power plants
369
Fresh additions of heavy metals do not model long-term effects on microbial biomass and activity
370
Fresh additions of heavy metals do not model long-term effects on microbial biomass and activity
371
Fresh allegations levelled at Toronto paediatrician
372
Fresh Ammonia Ice Clouds in Jupiter: I. Spectroscopic Identification, Spatial Distribution, and Dynamical Implications
373
Fresh and aged human lymphocyte metaphase slides are equally usable for GTG banding
374
Fresh and Brackish Water Ostracods of Upper Miocene Deposits, Arguvan/Malatya (Eastern Anatolia)
375
Fresh and Composted Paper Sludges Sustain Soil Productivity
376
Fresh and cooked color of dark-cutting beef can be altered by post-rigor enhancement with lactic acid
377
Fresh and hardened characteristics of self compacting concretes made with combined use of marble powder, limestone filler, and fly ash
378
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
379
Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler
380
Fresh and hardened properties of self-compacting concrete containing metakaolin
381
Fresh and hardened properties of self-compacting concrete produced with manufactured sand
382
Fresh cadaver dissection for training in plastic surgery
383
Fresh carbon and nitrogen inputs alter organic carbon mineralization and microbial community in forest deep soil layers
384
Fresh carbon and nitrogen inputs alter organic carbon mineralization and microbial community in forest deep soil layers
385
Fresh clouds: A parameterized updraft method for calculating cloud densities in one-dimensional models
386
Fresh concrete lateral pressure decay: Kinetics and factorial design to determine significant parameters
387
Fresh dairy manure as a substitute for chemical fertilization in growing wheat forage; effects on soil properties, forage yield and composition, weed contamination, and hay intake and digestibility by sheep
388
Fresh Decorative Patterns on the EBA Pottery of Yanik Tepe (Iran) from the Reorganized Assemblages at the National Museum of Iran
389
Fresh embryo transfer in the cleavage and blastocyst stages and pregnancy outcomes: A retrospective cross-sectional study
390
Fresh frozen plasma for acute exacerbations of hereditary angioedema
391
Fresh frozen plasma in the pediatric pump prime: a prospective, randomized trial
392
Fresh fruit improves lung function
393
Fresh Garlic Extract Enhances the Antimicrobial Activities of Antibiotics on Resistant Strains in Vitro
394
Fresh Herbage for Dairy Cattle. The Key to a Sustainable Food Chain, A. Elgersma, J. Dijkstra, S. Tamminga (Eds.). Springer, Dordrecht, The Netherlands (2007), ISBN: 13 978-1-4020-5451-8
395
Fresh insights into processes of nonhost resistance
396
Fresh market to supermarket: nutrition transition insights from Chiang Mai, Thailand
397
Fresh or Frozen Embryo Transfer in The Antagonist In Vitro Fertilization Cycles: A Retrospective Cohort Study
398
Fresh palm oil improves impaired renal function in phenylhydrazine-induced anaemic Wistar rats via its anti-anaemic effect and modulation of expressions of pro-oxidant/antioxidants, inflammatory cytokines and caspase-3 in the kidneys
399
Fresh perspectives for surface coordination chemistry
400
Fresh Pomegranate Juice Decreases Fasting Serum Erythropoietin in Patients with Type 2 Diabetes
401
Fresh self compacting concrete, a shear thickening material
402
Fresh simulation options in critical care nursing education
403
Fresh start or head start? Uniform bankruptcy exemptions and welfare
404
Fresh tomato production for the Sydney market: An evaluation of options to reduce freshwater scarcity from agricultural water use
405
Fresh tomato specific fluctuations in the composition of lipoxygenase-generated C6 aldehydes
406
Fresh versus cryopreserved testicular spermatozoa in men with nonobstructive azoospermia undergoing ICSI
407
Fresh versus frozen embryo transfer after gonadotropin-releasing hormone agonist trigger in gonadotropin-releasing hormone antagonist cycles among high responder women: A randomized, multi-center study
408
Fresh water and its sources during the SHEBA drift in the Canada Basin of the Arctic Ocean
409
Fresh water aquaculture fish consumption in Malaysia and heavy metals risk exposure to consumers
410
Fresh water by reverse osmosis based desalination: simulation and optimisation Original Research Article
411
Fresh water consumption in Kuwait: modeling the variable pattern
412
Fresh water green microalga Scenedesmus abundans: A potential feedstock for high quality biodiesel production
413
Fresh water masses in the Kara Sea during summer
414
Fresh water production by means of solar concentration: the AQUASOLIS project Original Research Article
415
Fresh water seepage and pore water recycling on the seafloor: Sagami Trough subduction zone, Japan
416
Fresh, Mechanical and Absorption Characteristics of Self-Consolidating Concretes Including Low Volume Waste PET Granules
417
Fresh-cut broccoli florets shelf-life as affected by packaging film mass transport properties Original Research Article
418
Fresh-cut product sanitation and wash water disinfection: Problems and solutions
419
Freshening and dense shelf water reduction in the Okhotsk Sea linked with sea ice decline
420
Freshening of the Marmara Sea prior to its post-glacial reconnection to the Mediterranean Sea
421
Freshly generated epithelium may be a donor site for the coverage of deep skin defects in the combined skin wounds
422
Freshly induced short-lived gamma-ray activity as a measure of fission rates in lightly re-irradiated spent fuel
423
Freshly induced short-lived gamma-ray activity as a measure of fission rates in lightly re-irradiated spent fuel
424
Freshman engineersʹ performance when solving design problems
425
Freshman to Senior Year: A Follow-Up Study of Identity, Narcissism, and Defense Mechanisms,
426
Freshmen versus Interns’ Specialty Interests
427
Freshness assessment of cultured sea bream (Sparus aurata) by chemical, physical and sensory methods
428
Freshness assessment of European eel (Anguilla anguilla) by sensory, chemical and microbiological methods
429
Freshness assessment of gilthead sea bream (Sparus aurata) by machine vision based on gill and eye color changes Original Research Article
430
Freshness assessment of ray fish stored in ice by biochemical, chemical and physical methods
431
Freshness assessment of stored meat by specific activity of glutathione transferase
432
Freshness Gauge based cold storage management: A method for adjusting temperature and humidity levels for food quality
433
Freshness monitoring of sea bream (Sparus aurata) with a potentiometric sensor
434
Freshness specification for a class of asynchronous communication mechanisms
435
Fresh-Packed RBC Infusion Diminishes Acute AlP Poisoned-Patients Mortality Rate: A Clinical Trial
436
Freshwater Algal Blooms and Their Control: Comparison of the European and Australian Experience
437
Freshwater algal cultivation with animal waste for nutrient removal and biomass production
438
Freshwater and marine microalgae sequestering of CO2 at different C and N concentrations – Response surface methodology analysis
439
Freshwater biodissolution rates of limestone in the temperate climate of the Dinaric karst in Slovenia
440
Freshwater biodiversity under climate warming pressure: Identifying the winners and losers in temperate standing waterbodies
441
Freshwater bivalves rearing: a brief overview
442
Freshwater bivalves tell of past climates: But how clearly do shells from polluted rivers speak?
443
Freshwater chlorophycean algae in recent marine sediments of the Beaufort, Laptev and Kara Seas (Arctic Ocean) as indicators of river runoff
444
Freshwater conservation planning in data-poor areas: An example from a remote Amazonian basin (Madre de Dios River, Peru and Bolivia) Original Research Article
445
Freshwater copepods from the east coast of the Kamchatka Peninsula, Russia
446
Freshwater crabs and the biodiversity crisis: Importance, threats, status, and conservation challenges
447
Freshwater discharge and sediment dispersal — Control on growth, ecological structure and geometry of Late Miocene shallow-water coral ecosystems (early Tortonian, Crete/Greece)
448
Freshwater discharge into the Caribbean Sea from the rivers of Northwestern South America (Colombia): Magnitude, variability and recent changes
449
Freshwater diversions as an ecosystem management tool for maintaining soil organic matter accretion in coastal marshes
450
Freshwater DOC measurements by high-temperature combustion: Comparison of differential (DTC - DIC) and DIC purging methods
451
Freshwater ecoregions of North America. A conservation assessment: R.A. Abell, D.M. Olson, E. Dinerstein, P.T. Hurley et al. (WWF), Island Press, Washington, DC, 2000, 368 pp. ISBN 1-55963-734-X
452
Freshwater ecosystem service footprint model: A model to evaluate regional freshwater sustainable development—A case study in Beijing–Tianjin–Hebei, China
453
Freshwater Ecosystems—Structure and Response
454
Freshwater export from the Labrador Current to the North Atlantic Current at the Tail of the Grand Banks of Newfoundland
455
Freshwater fish and their conservation in Portugal Original Research Article
456
Freshwater fish as a dietary source of vitamin A in Cambodia
457
Freshwater Fish Diversity and Composition in Batang Kerang Floodplain, Balai Ringin, Sarawak
458
Freshwater fish in Anatolia, Turkey Original Research Article
459
Freshwater Fish Myeloid Differentiation Primary Response Protein MyD88: Characterisation and Homology Modelling by Using Computational Tools
460
Freshwater Fishes of Gunung Jerai, Kedah Darul Aman: A Preliminary Study
461
Freshwater food web biomanipulation: A powerful tool for water quality improvement, but maintenance is required
462
Freshwater green algae Chlorella sp. and Scenedesmus obliquus enriched with B group of vitamins can enhance fecundity of Daphnia magna
463
Freshwater inflow requirements for the protection of the critical habitat and the drinking water sources in the Yangtze River Estuary, China
464
Freshwater inflows and seasonal forcing strongly influence macrofaunal assemblages in Mediterranean coastal lagoons
465
Freshwater input into the coastal ocean and its relation with the salinity distribution off austral Chile (35–55°S)
466
Freshwater Issues: A Reference Handbook: Zachary A. Smith and Grenetta Thomassey, ABC CLIO, Santa Barbara, 281 pp. Hardback, ISBN 1-57607-649-0; eBOOK ISBN 1-57607-650-4
467
Freshwater lens formation below juvenile dunes on a barrier island (Spiekeroog, Northwest Germany)
468
Freshwater Malacological Fauna of the Ruzizi Plain, Democratic Republic of the Congo: Biodiversity and Outbreaks of Schistosomiasis
469
Freshwater megaflood sedimentation: What can we learn about generic processes?
470
Freshwater Microbiology: Biodiversity and Dynamic Interactions of Microorganisms in the Aquatic Environment, David C. Sigee (Ed.). Wiley, UK (2005)
471
Freshwater molluscan biology: The Ecology of Freshwater Molluscs by Robert T. Dillon Jr.
472
Freshwater molluscs from volcanic areas as model organisms to assess adaptation to metal chronic pollution
473
Freshwater oligochaetes (Annelida) from Western Ghats and the west coast of Karnataka (India)
474
Freshwater oligochaetes (Oligochaeta, Clitellata, Annelida) of North Pribaikalye (East Siberia, Russia)
475
Freshwater Ostracoda (Crustacea) of Diyarbakır Province, including a new report for Turkey
476
Freshwater Ostracoda (Crustacea) of Inari Lapland in northern Finland
477
Freshwater ostracods (Crustacea) from the Lateglacial site at Miesenheim, Germany, and temperature reconstruction during the Meiendorf Interstadial
478
Freshwater outflow and Subtropical Convergence influence on phytoplankton biomass on the southern Brazilian continental shelf
479
Freshwater outflow of the Baltic Sea and transport in the Norwegian current: A statistical correlation analysis based on a numerical experiment
480
Freshwater phytoplankton quantification by chlorophyll a: a comparative study of in vitro, in vivo and in situ methods
481
Freshwater prokaryote and virus communities can adapt to a controlled increase in salinity through changes in their structure and interactions
482
Freshwater recharge into a shallow saline groundwater system, Cooper Creek floodplain, Queensland, Australia
483
Freshwater Scarcity, Interdependence and Institutionalism in Jordanian Foreign Policy: Towards Conflict or Cooperation?
484
Freshwater Scarcity, Interdependence and Institutionalism in Jordanian Foreign Policy: Towards Conflict or Cooperation?
485
Freshwater sediment pesticide biodegradation potential as an ecological indicator of microbial recovery following a decrease in chronic pesticide exposure: A case study with the herbicide diuron
486
Freshwater seepages and ephemeral macroalgae proliferation in an intertidal bay: I Effect on benthic community structure and food web
487
Freshwater seepages and ephemeral macroalgae proliferation in an intertidal bay: II. Effect on benthic biomass and metabolism
488
Freshwater sensitivity of glauconitic hydrocarbon reservoirs
489
Freshwater snail diversity in Benin (West Africa) with a focus on human schistosomiasis
490
Freshwater snails alter habitat use in response to predation
491
Freshwater Snails of Tabuk Region, Northern Saudi Arabia
492
Freshwater springs on intertidal sand flats cause a switch in dominance among polychaete worms
493
Freshwater transport estimates and the global overturning circulation: Shallow, deep and throughflow components
494
Freshwater tufa record from Spain supports evidence for the past interglacial being wetter than the Holocene in the Mediterranean region
495
Freshwater variability and predictability in the Alaska Coastal Current
496
Freshwater, tidal and wave influences on a small estuary
497
Freshwater–seawater mixing experiments in sand columns
498
Fresh-weight measurements of roots provide inaccurate estimates of the effects of plant growth-promoting bacteria on root growth: a critical examination
499
Fresh-weight measurements of roots provide inaccurate estimates of the effects of plant growth-promoting bacteria on root growth: a critical examination
500
Fresnel absorption of 1 μm- and 10 μm-laser beams at the keyhole wall during laser beam welding: Comparison between smooth and wavy surfaces
501
Fresnel contrast analysis of composition changes and space charge at grain boundaries in mullite
502
Fresnel contrast analysis of composition changes and space charge at grain boundaries in mullite
503
Fresnel Diffraction from Phase Steps and Its Applications
504
Fresnel diffraction on sensitive elements of optical — electronics transducers Original Research Article
505
Fresnel lens fabrication for broadband IR optics using hot embossing process
506
Fresnel lens to concentrate solar energy for the photocatalytic decoloration and mineralization of orange II in aqueous solution
507
Fresnel modeling of hematite crystal surfaces and application to martian hematite spherules
508
Fresnel phase matching: a universal phase matching scheme
509
Fresnel volumes corresponding to PKP waves in the IASP91 model
510
Fresnel zone plates as neutron optical elements
511
Fresnel zone plates as neutron optical elements
512
Fresnelets: new multiresolution wavelet bases for digital holography
513
Fresnel-reflection-based fiber sensor for on-line measurement of solute concentration in solutions
514
Fresnoite crystal structure in glass-ceramics
515
FRET based selective and ratiometric ‘naked-eye’ detection of CN− in aqueous solution on fluorescein–Zn–naphthalene ensemble platform
516
FRET based ultra sensor for detection of Hg (II) in water: A comparative study using citrate and marcapto propanoic acid as stabilizer of AuNPs
517
FRET between non-substrate probes detects lateral lipid domain formation during phospholipase A2 interfacial catalysis
518
FRET detection of DNA sequence via electrostatic interaction of polycationic phenyleneethynylene dendrimer with DNA/PNA hybrid
519
FRET function of polymeric ionic liquid film containing rhodamine moieties for exhibiting emissions by excitation at wide wavelength areas
520
FRET induced by an ‘allosteric’ cycloaddition reaction regulated with exogenous inhibitor and effectors
521
FRET structure with non-radiative acceptor provided by dye-linker–glass surface complex and single-molecule photodynamics by TIRFM-polarized imaging
522
FRET study of the structural and kinetic effects of PKC phosphomimetic cardiac troponin T mutants on thin filament regulation
523
FRET-based aptamer probe for rapid angiogenin detection
524
FRET-based assay of the processing reaction kinetics of stimulus-responsive peptides: influence of amino acid sequence on reaction kinetics
525
FRET-based fluorescence probes for hydrolysis study and pig liver esterase activity
526
FRET-based in Vivo Screening for Protein Folding and Increased Protein Stability
527
FRET-based rational strategy for ratiometric detection of Cu2+ and live cell imaging
528
FRET-derived ratiometric fluorescence sensor for Cu2+
529
FRET-induced nanomolar detection of Fe2+ based on cinnamaldehyde-rhodamine derivative
530
FRETsg: Biomolecular structure model building from multiple FRET experiments Original Research Article
531
Fretting and fretting corrosion behavior of novel micro alloyed rail steels
532
Fretting behavior of a rubber coating: Effect of temperature and surface roughness variations
533
Fretting behavior of cortical bone against titanium and its alloy
534
Fretting behavior of low-friction coatings: contribution to industrial selection
535
Fretting behavior of shot peened Ti–6Al–4V under slip controlled mode
536
Fretting behavior of Ti-6Al-4V under combined high cycle and low cycle fatigue loading
537
Fretting behaviors of hot-pressed electrospun hydroxyapatite/poly(dl-lactide) fibrous composites as potential orthopedic implants
538
Fretting behaviour of galvanised steel
539
Fretting behaviour of glass-fibre-reinforced polypropylene composite against 2024 Al alloy
540
Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions
541
Fretting behaviour of unidirectional glass fibre–epoxy composites, influence of electric charge effects
542
Fretting behaviour of various intermetallic compounds in electrical contacts: Influence on reliability
543
Fretting contact of two elastic solids with graded coatings under torsion
544
Fretting contact study of Ti–6Al–4 V/graphite couples in a dry shaft/bearing contact with thrust: Influence of plasma nitriding of the titanium alloy
545
Fretting corrosion behaviour of Ti–6Al–4V alloy in artificial saliva containing varying concentrations of fluoride ions
546
Fretting corrosion characteristics of electrodeposited and hot dipped tin coating contacts
547
Fretting corrosion characteristics of polished collarless tapered stems in a simulated biological environment
548
Fretting corrosion damage of total hip prosthesis: Friction coefficient and damage rate constant approach
549
Fretting corrosion in liquid lead of structural steels for lead-cooled nuclear systems: Preliminary study of the influence of temperature and time
550
Fretting corrosion of fully cemented polished collarless tapered stems: The influence of PMMA bone cement
551
Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature
552
Fretting corrosion of tin-plated contacts
553
Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics
554
Fretting damage assessment in Ti-6Al-4V by magnetic sensing
555
Fretting damage assessment of titanium alloys using orientation imaging microscopy
556
Fretting damage in thin sheets: Analysis of an experimental configuration
557
Fretting damage modeling of liner-bearing interaction by combined finite element – discrete element method
558
Fretting damage of TiN coated zircaloy-4 tube
559
Fretting fatigue – Experimental and numerical approaches
560
Fretting fatigue analysis using a fracture mechanics based small crack growth prediction method
561
Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze
562
Fretting fatigue and wear damage of structural components in nuclear power stations—Fitness for service and life management perspective
563
Fretting fatigue and wear in bolted connections: A multi-level formulation for the computation of local contact stresses
564
Fretting fatigue and wear: Guest Editors: Kazuhisa Miyoshi, Bradley A. Lerch, and Susan L. Draper, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio
565
Fretting fatigue behavior and life prediction of automotive steel bolted joint
566
Fretting fatigue behavior of Al7075-T6 at sub-zero temperature
567
Fretting fatigue behavior of riveted Al 6XXX components
568
Fretting fatigue behavior of shot-peened Ti–6Al–4V under seawater environment
569
Fretting fatigue behavior of Ti–6Al–4V at elevated temperature
570
Fretting fatigue behavior of Ti–6Al–4V under seawater environment
571
Fretting fatigue behavior of Ti–6Al–4V with dissimilar mating materials
572
Fretting fatigue behaviour of shot-peened Ti-6Al-4V at room and elevated temperatures
573
Fretting fatigue behaviour of Ti–6Al–4V alloy under plane bending stress and contact stress
574
Fretting fatigue case studies of engineering components
575
Fretting fatigue considerations in holistic structural integrity based design processes (HOLSIP)—A continuing evolution
576
Fretting fatigue crack analysis in Ti–6Al–4V
577
Fretting fatigue crack analysis of the turbine blade from nuclear power plant
578
Fretting fatigue crack growth for a spherical indenter with constant and cyclic bulk load
579
Fretting fatigue crack growth simulation based on a combined experimental and XFEM strategy
580
Fretting fatigue crack growth simulation based on a combined experimental and XFEM strategy
581
Fretting fatigue crack initiation behavior using process volume approach and finite element analysis
582
Fretting fatigue crack initiation lifetime predictor tool: Using damage mechanics approach
583
Fretting fatigue crack initiation mechanism in Ti–6Al–4V
584
Fretting fatigue crack initiation: An experimental and theoretical study
585
Fretting fatigue crack nucleation in Ti–6Al–4V
586
Fretting fatigue damage accumulation in PH13–8Mo stainless steel
587
Fretting fatigue experiments and analyses with a spherical contact in combination with constant bulk stress
588
Fretting fatigue failure of an aero engine turbine blade
589
Fretting fatigue in 2XXX series aerospace aluminium alloys
590
Fretting fatigue in dovetail blade roots: Experiment and analysis
591
Fretting fatigue in hydrogen gas
592
Fretting fatigue in overhead conductors: Rig design and failure analysis of a Grosbeak aluminium cable steel reinforced conductor
593
Fretting fatigue life estimations based on fretting mechanisms
594
Fretting fatigue life prediction using the extended finite element method
595
Fretting fatigue life prediction using the extended finite element method
596
Fretting fatigue limit as a short crack problem at the edge of contact
597
Fretting fatigue of 42CrMo4 steel at ultrasonic frequency
598
Fretting fatigue of a shrink-fit pin subjected to rotating bending: Experiments and simulations
599
Fretting fatigue of aluminum alloy in contact with steel in oil drill pipe connections, modeling to interpret test results
600
Fretting fatigue of laser shock peened Ti–6Al–4V
601
Fretting fatigue of rough surfaces
602
Fretting fatigue of single crystal nickel at 600 °C
603
Fretting fatigue of zinc coated low carbon steel EN H320 M
604
Fretting fatigue predictions in a complex coupling
605
Fretting fatigue properties of plasma nitrided AISI 316 L stainless steel: Experiments and finite element analysis
606
Fretting fatigue strength estimation considering the fretting wear process
607
Fretting fatigue strength reduction factor for interference fits
608
Fretting fatigue test analysis of contact
609
Fretting fatigue tests and crack initiation analysis on zircaloy tube specimens
610
Fretting fatigue under variable loading below fretting fatigue limit
611
Fretting in prosthetic devices related to human body
612
Fretting modelling with a crystal plasticity model of Ti6Al4V
613
Fretting on the cubic face of a single-crystal Ni-base superalloy at room temperature
614
Fretting studies of nanocrystalline Pd, Pd-Ag and Pd-Y films
615
Fretting studies on self-mated stainless steel and chromium carbide coated surfaces under controlled environment conditions
616
Fretting wear analysis of TiC/VC multilayered hard coatings: experiments and modelling approaches
617
Fretting wear and cracking in sintered metal matrix composites
618
Fretting wear and fracture behaviors of Cr-doped and non-doped DLC films deposited on Ti–6al–4V alloy by unbalanced magnetron sputtering
619
Fretting wear and friction reduction of CP titanium and Ti–6Al–4V alloy by ultrasonic nanocrystalline surface modification
620
Fretting wear behavior of a Cu–Ni–In plasma coating
621
Fretting wear behavior of a nuclear fuel rod under a simulated primary coolant condition
622
Fretting wear behavior of bulk amorphous steel
623
Fretting wear behavior of controlled ball impact treated aluminium alloy under dry sliding condition
624
Fretting wear behavior of conventional and nanostructured Al2O3–13 wt%TiO2 coatings fabricated by plasma spray
625
Fretting wear behavior of fine grain structured aluminium alloy formed by oil jet peening process under dry sliding condition
626
Fretting wear behavior of liquid nitrided structural steel, En24 and bearing steel, En31
627
Fretting wear behavior of nanocrystalline surface layer of copper under dry condition
628
Fretting wear behavior of nitrogen ion implanted titanium alloys in bovine serum lubrication
629
Fretting wear behavior of PVD TiB2 coatings
630
Fretting wear behavior of TiB2-based materials against bearing steel under water and oil lubrication
631
Fretting wear behaviors of a railway axle steel
632
Fretting wear behaviors of hoisting rope wires in acid medium
633
Fretting wear behaviors of mandibular condylar cartilage of nature temporomandibular joint in vitro
634
Fretting wear behaviors of micro-arc oxidation coating sealed by grease
635
Fretting wear behaviors of nanometer Al2O3 and SiO2 reinforced PEEK composites
636
Fretting wear behaviors of steel wires in coal mine under different corrosive mediums
637
Fretting wear behaviors of steel wires under friction-increasing grease conditions
638
Fretting wear behaviour of microarc oxidation coatings formed on titanium alloy against steel in unlubrication and oil lubrication
639
Fretting wear behaviour of surface mechanical attrition treated alloy 718
640
Fretting wear characteristics of cold gas-dynamic sprayed aluminum alloys
641
Fretting wear characteristics of titanium matrix composites reinforced by titanium boride and titanium carbide particulates
642
Fretting wear characterization by point contact of nickel superalloy interfaces
643
Fretting wear in self-piercing riveted aluminium alloy sheet
644
Fretting wear of a coated titanium alloy under free displacement
645
Fretting wear of a TiN PVD coating under variable relative humidity conditions—development of a ‘composite’ wear law
646
Fretting wear of Al–Si alloy matrix composites
647
Fretting wear of carburized titanium alloy against ZrO2 under serum lubrication
648
Fretting wear of HVOF Ni–Cr based alloy deposited on SAE 1045 steel
649
Fretting wear of laterally supported tube
650
Fretting wear of multilayered PVD TiAlCN/TiAlN/TiAl on AISI 4140 steel
651
Fretting wear of stainless steels under variable temperature conditions: Introduction of a ‘composite’ wear law
652
Fretting wear of thin steel wires. Part 1: Influence of contact pressure
653
Fretting wear of thin steel wires. Part 2: Influence of crossing angle
654
Fretting wear of Ti-48Al-2Cr-2Nb
655
Fretting wear of Zr-alloy pressure tubes under the combined effects of in-plane and out-of-plane flow-induced vibrations
656
Fretting wear performance of diesel fuel lubricity additives
657
Fretting wear performance of diesel fuel lubricity additives
658
Fretting wear performance of diesel fuel lubricity additives
659
Fretting wear performance of diesel fuel lubricity additives
660
Fretting wear properties of CrN and Cr2N coatings
661
Fretting wear studies on diamond-like carbon coated Ti–6Al–4V
662
Fretting wear studies on uncoated, plasma nitrided and laser nitrided biomedical titanium alloys
663
Fretting wear study of Cu–10 wt% TiB2 and Cu–10 wt% TiB2–10 wt% Pb composites
664
Fretting wear study on Ti–Ca–P biocomposite in dry and simulated body fluid
665
Fretting wear volume calculation on cylindrical surface: Inaccuracy due to misalignment of measured object with respect to 3D profiler
666
Fretting-corrosion behavior of β titanium alloys in simulated synovial fluid
667
Fretting-corrosion between 316L SS and PMMA: Influence of ionic strength, protein and electrochemical conditions on material wear. Application to orthopaedic implants
668
Fretting-corrosion mapping of CP-Ti in Ringerʹs solution
669
Fretting-corrosion of materials used as orthopaedic implants
670
Fretting–fatigue behavior of steel wires in low cycle fatigue
671
Fretting-fatigue behaviour of bridge engineering cables in a solution of sodium chloride
672
Fretting-wear of zirconium alloys Original Research Article
673
Freud and Neuropsychology: Comments Related to Anosognosia
674
Freud and the making of psychoanalysis
675
Freud as a Psychotherapist and Scientist in Iran
676
Freud equations for Legendre polynomials on a circular arc and solution of the Grünbaum–Delsarte–Janssen–Vries problem Original Research Article
677
Freud goes under the hammer
678
Freud Through the Centuries
679
Freud’s Return of the Repressed and Conflict in Achebe’s Arrow of God
680
Freudental magic square and its dimensional implication for and high energy physics
681
Freudʹs Critical Study
682
Freudʹs literary culture : Graham Frankland, Cambridge University Press (Cambridge Studies in German), Cambridge, 2000, pp. 260+xiii, Price £35, ISBN 0-521-66316-4
683
Freudʹs neurology
684
Freundlich adsorption isotherms of agricultural by-product-based powdered activated carbons in a geosmin–water system
685
Freunds adjuvant alone is antiatherogenic in apoE-deficient mice and specific immunization against TNFα confers no additional benefit
686
FREZCHEM: A geochemical model for cold aqueous solutions
687
FRFT Based Timing Estimation Method for an OFDM System
688
FrFT-CSWSF: Estimating cross-range velocities of ground moving targets using multistatic synthetic aperture radar
689
Frِhlich electron-interface and -propagating optical phonon interactions in a wurtzite multi-shell cylindrical heterostructure
690
Fricke xylenol gel characterization using a photoacustic technique
691
Fricke xylenol gel characterization using a photoacustic technique
692
Friction analysis of microcosmic elastic-plastic contact for extrusion forming
693
Friction and abrasive wear of UHWMPE sliding on ice
694
Friction and adhesion behavior of polycrystalline diamond films deposited on metals
695
Friction and adhesion in boundary lubrication measured by microtribometers
696
Friction and adhesion in rigid surface indentation of nitrile rubber
697
Friction and adhesion of single spray-dried granules containing a hygroscopic polymeric binder
698
Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load
699
Friction and adhesion properties of vertically aligned multi-walled carbon nanotube arrays and fluoro-nanodiamond films Original Research Article
700
Friction and anti-wear properties of two tris(pentafluoroethyl)trifluorophosphate ionic liquids as neat lubricants
701
Friction and atomic-layer-scale wear of graphitic lubricants on SiC(0001) in dry sliding
702
Friction and complex dynamics at solid surfaces Original Research Article
703
Friction and compression characteristics of chickpea flour and components
704
Friction and compression characteristics of chickpea flour and components
705
Friction and contact resistance of nanocomposite Ti–Ni–C coatings
706
Friction and deformation behaviour of human skin
707
Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites
708
Friction and dry sliding wear behaviour of cermets
709
Friction and durability characteristics of ultrathin perfluoropolyether lubricant film composed of bonded and mobile molecular layers on diamond-like carbon surfaces
710
Friction and dynamics of rock avalanches travelling on glaciers
711
Friction and endurance of MoS2/ta-C coatings produced by Laser Arc deposition
712
Friction and formability of galvannealed interstitial free sheet steel
713
Friction and fracture properties of polysilicon coated with self-assembled monolayers
714
Friction and fretting on quasicrystals under vacuum
715
Friction and heat transfer characteristics of flow through square duct with twisted tape insert
716
Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements
717
Friction and heat transfer characteristics of laminar swirl flow through the round tubes inserted with alternate clockwise and counter-clockwise twisted-tapes
718
Friction and heat transfer coefficient in micro and nano channels filled with porous media for wide range of Knudsen number
719
Friction and heat transfer for inclined surfaces in relative motion to an air stream under buoyancy effect
720
Friction and instability of steady sliding: squeal of a rubber/glass contact
721
Friction and multiple scratch behavior of polymer+monomer liquid crystal systems
722
Friction and nanowear of hard coatings in reciprocating sliding at milli-Newton loads
723
Friction and noise of rubber belt in low temperature condition: The influence of interfacial ice film
724
Friction and rigid body identification of robot dynamics
725
Friction and rolling–sliding wear of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel
726
Friction and sliding wear behaviour of electrodeposited cobalt and cobalt–tungsten alloy coatings for replacement of electrodeposited chromium
727
Friction and surface behavior of selected titanium alloys during reciprocating-sliding motion
728
Friction and tactile perception of textile fabrics
729
Friction and thermal phenomena in chemical mechanical polishing
730
Friction and transfer layer formation in polymer–steel tribo-system: Role of surface texture and roughness parameters
731
Friction and tribological behavior of (Ti, V)C–Co cermets
732
Friction and vibration of automotive brake pads containing different abrasive particles
733
Friction and Wear Assessment of Yttria Stabilised Zirconia Thermal Barrier Coatings Produced by Plasma Spraying Method
734
Friction and wear behavior of a new 40Cr steel–PTFE fabric composite under heavy loads
735
Friction and wear behavior of Al–CNT composites
736
Friction and wear behavior of as-cast Mg–Zn–Y quasicrystal materials
737
Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition
738
Friction and wear behavior of C-based composites in situ reinforced with W2B5
739
Friction and wear behavior of Cu–CeO2 nanocomposite coatings synthesized by pulsed electrodeposition
740
Friction and wear behavior of diamond-like carbon coating on plasma nitrided mild steel under boundary lubrication
741
Friction and wear behavior of electroless Ni-based CNT composite coatings
742
Friction and wear behavior of electroless Ni–P and Ni–W–P alloy coatings
743
Friction and wear behavior of flame-sprayed PEEK coatings
744
Friction and wear behavior of human teeth under various wear conditions
745
Friction and wear behavior of hybrid glass/PTFE fabric composite reinforced with surface modified nanometer ZnO
746
Friction and wear behavior of hydroxyapatite based composite ceramics reinforced with fibers
747
Friction and wear behavior of laser cladding Ni/hBN self-lubricating composite coating
748
Friction and wear behavior of laser textured surface under lubricated initial point contact
749
Friction and wear behavior of laser-sintered iron–silicon carbide composites
750
Friction and wear behavior of nanosilica-filled epoxy resin composite coatings
751
Friction and wear behavior of near-frictionless carbon coatings in formulated gasolines
752
Friction and wear behavior of NiAl–10 wt%Ti3SiC2 composites
753
Friction and wear behavior of Ni–graphite composites prepared by electroforming
754
Friction and wear behavior of Ni–P coated Si3N4 reinforced Al6061 composites
755
Friction and wear behavior of nitrogen ion implanted UHMWPE against ZrO2 ceramic
756
Friction and wear behavior of nodular cast iron modified by a laser micro-precision treatment sliding against steel under the lubrication of liquid paraffin containing various additives
757
Friction and wear behavior of plasma assisted chemical vapor deposited nanocomposites made of metal nanoparticles embedded in a hydrogenated amorphous carbon matrix
758
Friction and wear behavior of plasma nitrided 1Cr18Ni9Ti austenitic stainless steel under lubrication condition
759
Friction and wear behavior of polyetherimide composites in various wear modes
760
Friction and wear behavior of pure carbon strip sliding against copper contact wire under AC passage at high speeds
761
Friction and wear behavior of self-lubricating ZrO2(Y2O3)–CaF2–Mo–graphite composite from 20 °C to 1000 °C
762
Friction and wear behavior of sintered magnesium composite reinforced with CNT-Mg2Si/MgO
763
Friction and wear behavior of structural ceramics sliding against zirconia
764
Friction and wear behavior of surface nanocrystallized aluminium alloy under dry sliding condition
765
Friction and wear behavior of SUS 304 austenitic stainless steel against Al2O3 ceramic ball under relative high load
766
Friction and wear behavior of thioether hydroxy vegetable oil
767
Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under dry sliding conditions
768
Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under lubricated sliding conditions
769
Friction and wear behavior of Ti following laser surface alloying with Si, Al and Si+Al
770
Friction and wear behavior of titanium matrix (TiB + TiC) composites
771
Friction and wear behavior of ultra-high molecular weight polyethylene as a function of polymer crystallinity
772
Friction and wear behavior of vacuum plasma-sprayed Ti–Zr–Ni quasicrystal coatings
773
Friction and wear behavior of ZrO2–Al2O3 composite coatings deposited by air plasma spraying: Correlation with physical and mechanical properties
774
Friction and wear behaviors of a (Ca, Mg)-sialon/SAE 52100 steel pair under the lubrication of various polyols as water-based lubricating additives
775
Friction and wear behaviors of C/C-SiC composites containing Ti3SiC2
776
Friction and wear behaviors of carbon-based multilayer coatings sliding against different rubbers in water environment
777
Friction and wear behaviors of catalytic methylesterified bio-oil
778
Friction and wear behaviors of compacted graphite iron with different biomimetic units fabricated by laser cladding
779
Friction and wear behaviors of dental ceramics against natural tooth enamel
780
Friction and wear behaviors of ionic liquid of alkylimidazolium hexafluorophosphates as lubricants for steel/steel contact
781
Friction and wear behaviors of nanocrystalline surface layer of chrome–silicon alloy steel
782
Friction and wear behaviors of nanocrystalline surface layer of medium carbon steel
783
Friction and wear behaviors of nanocrystalline surface layer of pure copper
784
Friction and wear behaviors of reciprocatingly extruded Al–SiC composite
785
Friction and wear behaviors of Sialon–Si3N4 graded nano-composite ceramic materials in sliding wear tests and in cutting processes
786
Friction and wear behaviors of the carbide tools embedded with solid lubricants in sliding wear tests and in dry cutting processes
787
Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes
788
Friction and wear behaviour of acetal and nylon gears
789
Friction and wear behaviour of Al2O3/TiB2/SiCw ceramic composites at temperatures up to 800°C
790
Friction and wear behaviour of bacterial cellulose against articular cartilage
791
Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications
792
Friction and wear behaviour of carbon nitride films deposited on plasma nitrided Ti–6Al–4V
793
Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites
794
Friction and wear behaviour of cemented carbides
795
Friction and wear behaviour of cp Ti and Ti6Al4V following nitric acid passivation
796
Friction and wear behaviour of CrN coating at temperatures up to 500 °C
797
Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds
798
Friction and wear behaviour of electron beam surface treated aluminium alloys AlSi10Mg(Cu) and AlSi35
799
Friction and wear behaviour of hard and superhard coatings at cryogenic temperatures
800
Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 °C
801
Friction and wear behaviour of implanted AISI 316L SS and comparison with a substrate
802
Friction and wear behaviour of low-friction coatings in conventional and alternative fuels
803
Friction and wear behaviour of PVD chromium nitride supported carbon coatings
804
Friction and wear behaviour of pyramidal nanoscaled surface features
805
Friction and wear behaviour of rolling–sliding steel contacts
806
Friction and wear behaviour of SiAlON ceramics under fretting contacts
807
Friction and wear behaviour of SiAlON ceramics under fretting contacts
808
Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests
809
Friction and wear behaviour of stainless steel rubbing against copper-impregnated metallized carbon
810
Friction and wear behaviour of TiN/Au, TiN/MoS2 and TiN/TiCN/a-C:H coatings
811
Friction and wear behaviour of unfilled engineering thermoplastics
812
Friction and wear behaviour of WC–Co–Cr3C2–VC cemented carbides obtained from nanocrystalline mixtures
813
Friction and wear behaviours of Ti(C,O,N) dark decorative coatings
814
Friction and wear bench tests of different engine liner surface finishes
815
Friction and wear characteristics of a Ti-containing diamond-like carbon coating with an SRV tester at high contact load and elevated temperature
816
Friction and wear characteristics of aluminum bronze coatings on steel substrates sprayed by a low pressure plasma technique
817
Friction and wear characteristics of electrodeposited nanocrystalline nickel–tungsten alloy films
818
Friction and wear characteristics of hard coatings
819
Friction and Wear Characteristics of Hot-Extruded Leaded Aluminum Bearing Alloys
820
Friction and wear characteristics of hydrogenated diamond-like carbon films formed on the roughened stainless steel surface
821
Friction and wear characteristics of multi-layer graphene films investigated by atomic force microscopy
822
Friction and wear characteristics of the carbon nanotube–aluminum composites with different manufacturing conditions
823
Friction and wear characteristics of various prosthetic materials sliding against smooth diamond-coated titanium alloy
824
FRICTION AND WEAR CHARACTERISTICS OF WASTE VEGETABLE OIL CONTAMINATED LUBRICANTS
825
Friction and wear characteristics of WC–10Co–4Cr/Si3N4 tribopair lubricated under silt-laden water
826
Friction and wear characteristics of WC–Co cemented carbides in dry reciprocating sliding contact
827
Friction and wear characterization of sintered low alloyed chromium steels for structural components
828
Friction and wear characterization of some cobalt- and iron-based superalloys in zinc alloy baths
829
Friction and wear durability studies on the 3D negative fingerprint and honeycomb textured SU-8 surfaces
830
Friction and wear during twin-disc experiments under ambient and cryogenic conditions
831
Friction and wear in high speed sliding with and without electrical current
832
Friction and wear maps of titanium alloy against a-C:H20% (DLC) film
833
Friction and wear measurements of laser-sintered and coated parts
834
Friction and wear mechanisms in AlMgB14-TiB2 nanocoatings
835
Friction and wear mechanisms in hip prosthesis: Comparison of joint materials behaviour in several lubricants
836
Friction and wear mechanisms in MoS2/Sb2O3/Au nanocomposite coatings Original Research Article
837
Friction and wear mechanisms of K2O–B2O3–Al2O3–SiO2–MgO–F glass-ceramics
838
Friction and wear mechanisms of thin organic permanent coatings deposited on hot-dip coated steel
839
Friction and wear model of a heavy loaded sliding pair: Part III. Application to a lubricated plane bearing
840
Friction and wear of a rubber coating in fretting
841
Friction and wear of a Zr-based amorphous metal alloy under dry and lubricated conditions
842
Friction and wear of acetal: A matter of scale
843
Friction and wear of aluminium–steel contacts lubricated with ordered fluids-neutral and ionic liquid crystals as oil additives
844
Friction and wear of binder-less niobium carbide
845
Friction and wear of blended polyoxymethylene sliding against coated steel plates
846
Friction and wear of bronze powder composites including fullerene-like WS2 nanoparticles
847
Friction and wear of carbon steel near T1-transition under dry sliding
848
Friction and wear of ceramics: edited by Said Yahanmir; published by Marcel Dekker, Inc., New York; ISBN 0 8247 9115 0.
849
Friction and wear of ceramics: edited by Said Yahanmir; published by Marcel Dekker, Inc., New York; ISBN 0 8247 9115 0.
850
Friction and wear of ceramics: edited by Said Yahanmir; published by Marcel Dekker, Inc., New York; ISBN 0 8247 9115 0.
851
Friction and wear of ceramics: edited by Said Yahanmir; published by Marcel Dekker, Inc., New York; ISBN 0 8247 9115 0.
852
Friction and wear of coated surfaces — scales, modelling and simulation of tribomechanisms
853
Friction and wear of copper samples in the steady friction state
854
Friction and wear of copper–graphite composites made with Cu-coated and uncoated graphite powders
855
Friction and wear of Cu-free and Sb-free environmental friendly automotive brake materials
856
Friction and wear of diamond-containing polyimide composites in water and air
857
Friction and wear of diamond–silicon nano-systems: Effect of moisture and surface roughness
858
Friction and wear of DLC films on 304 austenitic stainless steel in corrosive solutions
859
Friction and wear of DLC films on magnesium alloy
860
Friction and wear of elastomer seals
861
Friction and wear of electroless NiP and NiP + PTFE coatings
862
Friction and wear of epoxy resin on inox steel: remarks on the influence of velocity, load and induced thermal state
863
Friction and wear of epoxy/TiO2 nanocomposites: Influence of additional short carbon fibers, Aramid and PTFE particles
864
Friction and wear of fiber reinforced polyimide composites
865
Friction and wear of friction materials containing two different phenolic resins reinforced with aramid pulp
866
Friction and wear of Inconel 690 for steam generator tube in elevated temperature water under fretting condition
867
Friction and wear of low nanometer Si3N4 filled epoxy composites
868
Friction and wear of lubricated M3 Class 2 sintered high speed steel with and without TiC and MnS additives
869
Friction and wear of magnetorheological fluid under magnetic field
870
Friction and wear of monolithic and glass-fiber reinforced PA66 in humid conditions
871
Friction and wear of MoS2 films on laser textured steel surfaces
872
Friction and wear of nanocrystalline Co and Co–W alloy coatings produced by pulse reverse electrodeposition
873
Friction and wear of PEEK composites in vacuum environment
874
Friction and wear of periodically micro-patterned polypropylene in dry sliding
875
Friction and wear of pivot jewel bearing in oil-bath lubrication for high rotational speed application
876
Friction and wear of polymer-based composites
877
Friction and wear of powdered composites impregnated with WS2 inorganic fullerene-like nanoparticles
878
Friction and wear of PPS/CNT nanocomposites with formation of electrically isolating transfer films
879
Friction and wear of pressureless sintered Ti(C,N)–WC ceramics
880
Friction and wear of PTFE composites at cryogenic temperatures
881
Friction and wear of rare earths modified carbon fibers filled PTFE composite under dry sliding condition
882
Friction and wear of rare-earth modified glass-fiber filled PTFE composites in dry reciprocating sliding motion with impact loads
883
Friction and wear of resin-based dental materials
884
Friction and wear of rotating pivots in MEMS and other small scale devices
885
Friction and wear of self-mated SiC and Si3N4 sliding in water
886
Friction and wear of sintered metallic brake linings on a C/C-SiC composite brake disc
887
Friction and wear of Synfluo 180XF wax and nano-Al2O3 filled Nomex fabric composites
888
Friction and wear of the lubricated vane and roller materials in a carbon dioxide refrigerant Pages 1252-1256
889
Friction and wear of the rotary compressor vane–roller surfaces for several sliding conditions
890
Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces
891
Friction and wear of tribofilms formed by zinc dialkyl dithiophosphate antiwear additive in low viscosity engine oils
892
Friction and wear of water lubricated PEEK and PPS sliding contacts
893
Friction and wear of water lubricated PEEK and PPS sliding contacts: Part 2. Composites with carbon or glass fibre
894
Friction and wear on the atomic scale
895
Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis
896
Friction and wear performance of copper–graphite surface composites fabricated by friction stir processing (FSP)
897
Friction and wear performance of nickel and molybdenum-reduction cast iron composite brake blocks including ceramic foams
898
Friction and wear performance of polyamide 6 and graphite and wax polyamide 6 composites under dry sliding conditions
899
Friction and wear performance of some thermoplastic polymers and polymer composites against unsaturated polyester
900
Friction and wear performances of borates and lanthanum chloride in water
901
Friction and wear performances of brake material dry sliding against a composite with a semi-interpenetrating network structure of ceramics and Al-alloy
902
Friction and Wear Phenomena in Cold Metal Forming: An Integrated Approach
903
Friction and wear properties of aligned carbon nanotubes reinforced epoxy composites under water lubricated condition
904
Friction and wear properties of aligned film of amorphous carbon nanorods on anodic aluminum oxide template in vacuum
905
Friction and wear properties of as-deposited and carbon ion-implanted diamond films
906
Friction and wear properties of as-deposited and carbon ion-implanted diamond films
907
Friction and wear properties of Babbitt alloy 16-16-2 under sea water environment
908
Friction and wear properties of bronze–graphite composite under water lubrication
909
Friction and wear properties of C/C–SiC braking composites
910
Friction and wear properties of carbon coated tool steel with pre-implantation by PIII
911
Friction and wear properties of carbon-ion implanted titanium nitride films
912
Friction and wear properties of combined surface modified carbon fabric reinforced phenolic composites
913
Friction and wear properties of copper matrix composites reinforced with short carbon fibers
914
Friction and wear properties of CrAlN and CrVN films deposited by cathodic arc ion plating method
915
Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air
916
Friction and wear properties of duplex MAO/CrN coatings sliding against Si3N4 ceramic balls in air, water and oil
917
Friction and wear properties of electroless Ni-P- (IF-MoS2) composite coatings in humid air and vacuum
918
Friction and wear properties of fabric/phenolic composites with plasma treated-hybrid glass/PTFE fabric
919
Friction and wear properties of Fe7Mo6- and αFeSi2-based alloys in rapeseed oil
920
Friction and wear properties of Fe7Mo6-based alloy in ethyl alcohol
921
Friction and wear properties of Fe–Mo intermetallic compounds under oil lubrication
922
Friction and wear properties of Fe–Si intermetallic compounds in ethyl alcohol
923
Friction and wear properties of graphite/glassy carbon composites
924
Friction and wear properties of hard coating materials on textured hard disk sliders
925
Friction and wear properties of hot-pressed NiCr–BaCr2O4 high temperature self-lubricating composites
926
Friction and wear properties of hybrid sol–gel nanocomposite coatings against steel: Influence of their intrinsic properties
927
Friction and wear properties of in situ (TiB2 + TiC)/Ti3SiC2 composites
928
Friction and wear properties of lead-free aluminum alloy bearing material with molybdenum disulfide layer by a reciprocating test
929
Friction and wear properties of Mo coatings on cast-iron substrates
930
Friction and wear properties of Ni–Cr–W–Al–Ti–MoS2 at elevated temperatures and self-consumption phenomena
931
Friction and wear properties of poly(methyl methacrylate)–hydroxyapatite hybrid coating on UHMWPE substrates
932
Friction and wear properties of reactive hot-pressed TiB2–TiN composites in sliding against Al2O3 ball at elevated temperatures
933
Friction and wear properties of scrap tire/potassium hexatitanate whisker composites
934
Friction and wear properties of short carbon fiber reinforced aluminum matrix composites
935
Friction and wear properties of stainless steel sliding against polyetheretherketone and carbon-fiber-reinforced polyetheretherketone under natural seawater lubrication
936
Friction and wear properties of steel backed Al–10Sn–4Si–1Cu metallic strips prepared via spray atomization–deposition-rolling route
937
Friction and wear properties of surface-treated carbon fiber-reinforced thermoplastic polyimide composites under oil-lubricated condition
938
Friction and wear properties of the co-deposited Ni–SiC nanocomposite coating
939
Friction and wear properties of thermo-reactive diffusion coatings against titanium nitride coated steels
940
Friction and wear properties of three-dimensionally braided carbon fabric-reinforced nylon composites
941
Friction and wear properties of Ti6Al4V/WC-Co in cold atmospheric plasma jet
942
Friction and wear properties of titanium and oxidised titanium in dry sliding against hardened C45 steel
943
Friction and wear properties of UHMWPE against ion implanted titanium alloy
944
Friction and wear properties of UHMWPE/Al2O3 ceramic under different lubricating conditions
945
Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded materials
946
Friction and wear properties of zirconium and niobium in a hydrogen environment
947
Friction and wear properties of αFeSi2–Si alloy, ReSi1.8 and MoSi2 in ethyl alcohol
948
Friction and wear reduction of hard TiAlSiN coatings by an integrated approach of laser surface texturing and high-energy ion implantation
949
Friction and wear scar analysis of carbon nanofiber-reinforced polymeric composite coatings on alumina/aluminum composite
950
Friction and wear studies of human hair and skin
951
Friction and wear studies of polyimide composites filled with short carbon fibers and graphite and micro SiO2
952
Friction and wear studies using Taguchi method on polyphenylene sulfide filled with a complex mixture of MoS2, Al2O3, and other compounds
953
Friction and wear study of diamond-like carbon gradient coatings on Ti6Al4V substrate prepared by plasma source ion implant-ion beam enhanced deposition
954
Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications
955
Friction and wear testing of rail and wheel material
956
Friction and Wear Testing—Source Book
957
Friction and wear variations of short carbon fiber (SCF)/PTFE/graphite (10 vol.%) filled PEEK: Effects of fiber orientation and nominal contact pressure
958
Friction based social force model for social foraging of sheep flock
959
Friction based social force model for social foraging of sheep flock
960
Friction behavior and preload relaxation of fastening systems with composite structures
961
Friction behavior evaluation of an EBT zinc-coated trip 700 steel sheet through flat friction tests
962
Friction behavior modeling and analysis in micro/meso scale metal forming process
963
Friction behavior of aluminum-coated 22MnB5 in hot stamping under dry and lubricated conditions
964
Friction behavior of co-continuous alumina/aluminum composites with and without SiC reinforcement
965
Friction behavior of in situ hydrothermal fabrication of sulfide film on copper
966
Friction behavior of laser cladding magnesium alloy against AISI 52100 steel
967
Friction behavior of lubricated zinc phosphate coatings
968
Friction behavior of Mg–Al–CO3 layered double hydroxide prepared by magnesite
969
Friction behavior of quenched and tempered steel in partial and gross slip conditions in fretting point contact
970
Friction behavior of sintered metallic brake pads on a C/C–SiC composite brake disc
971
Friction Behavior of Some Seed Oils: Biobased Lubricant Applications
972
Friction behavior of SUS 304 metastable austenitic stainless steel sheet against DC 53 die under the condition of friction coupling plastic deformation
973
Friction behaviors in cold rotary forging of 20CrMnTi alloy
974
Friction behaviors of carbon/carbon composites with different pyrolytic carbon textures Original Research Article
975
Friction behaviors of hydrogenated diamond-like carbon film in different environment sliding against steel ball
976
Friction behaviour evaluation in beryllium–copper threaded connections
977
Friction behaviour evaluation in beryllium–copper threaded connections
978
Friction behaviour of anodic oxide film on aluminum impregnated with molybdenum sulfide compounds
979
Friction behaviour of diamond-like carbon films with varying mechanical properties
980
Friction behaviour of solid oxide lubricants as second phase in α-Al2O3 and stabilised ZrO2 composites
981
Friction between a cemented carbide rock drill button and different rock types
982
Friction between cellulose surfaces measured with colloidal probe microscopy
983
Friction between human finger flexor tendons and pulleys at high loads
984
Friction between human skin and medical textiles for decubitus prevention
985
Friction between Si tip and (001)-2×1 surface: A molecular dynamics simulation Original Research Article
986
Friction burns to thigh caused by tourniquet
987
Friction characterisation of polymers abrasion (UHWMPE) during scratch tests: single and multi-asperity contact
988
Friction characteristic of micro-arc oxidative Al2O3 coatings sliding against Si3N4 balls in various environments
989
Friction characteristics and material transfer tendency in metal powder compaction
990
Friction characteristics of a brake friction material under different braking conditions
991
Friction characteristics of a potential articular cartilage biomaterial
992
Friction characteristics of aluminium silicon carbide graphite hybrid composites
993
Friction characteristics of compressible gas flows in microtubes
994
Friction characteristics of inorganic or organic thin coatings on solid surfaces under water lubrication
995
Friction Characteristics of Liquid Lubricated MEMS with Deterministic Boundary Slippage
996
Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication
997
Friction characterization and compensation in electro-mechanical systems
998
Friction coefficient and abrasive wear modes in ball-cratering tests conducted at constant normal force and constant pressure—Preliminary results
999
Friction coefficient and mass of silver agglomerates in the transition regime
1000
Friction coefficient and radius of curvature effects upon traffic flow on a curved Road
