<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Prediction of the Dimensions of Mental Health Based on Spiritual Health and Emotion Regulation Strategies during the Pandemic of Coronavirus in Iran
2
Prediction of the disc wear in a model IsaMill and its effect on the flow of grinding media
3
Prediction of the dispersion of particle clusters in the nano-scale-Part I: Steady shearing responses
4
Prediction of the distillation profile and cold properties of diesel fuels using mid-IR spectroscopy and neural networks
5
Prediction of the distribution of alkali and trace elements between the condensed and gaseous phases generated during clinical waste incineration
6
Prediction of the distribution of alkali and trace elements between the condensed and gaseous phases in a municipal solid waste incinerator
7
Prediction of the distribution of trace elements between the product streams of the Prenflo gasifier and comparison with reported data
8
Prediction of the droplet size and velocity joint distribution for sprays
9
Prediction of the dynamic characteristics of an elastically supported full-size flat plate from those of its complete-similitude scale model
10
Prediction of the dynamic response of a mini-cantilever beam partially submerged in viscous media using finite element method
11
Prediction of the dynamic response of composite sandwich beams under shock loading
12
Prediction of the dynamic thermal behaviour of walls for refrigerated rooms using lumped and distributed parameter models
13
Prediction of the effect of additives on slag resistance of Al2O3---SiO2---SiC---C bond phases in air
14
Prediction of the effect of additives on slag resistance of Al2O3SiO2SiCC bond phases in air
15
Prediction of the effect of artificial aging heat treatment on the yield strength of an open-cell aluminum foam
16
Prediction of the Effect of Mobile-Phase Salt Type on Protein Retention and Selectivity in Anion Exchange Systems
17
Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling
18
Prediction of the effect of vacuum sintering conditions on porosity and hardness of porous NiTi shape memory alloy using ANFIS
19
Prediction of the effective damage properties and failure properties of nonlinear anisotropic discontinuous reinforced composites Original Research Article
20
Prediction of the effective parameters of the nanofluids using the generalized stochastic perturbation method
21
Prediction of the effective thermal conductivity of three-dimensional dendritic regions by the finite element method
22
Prediction of the effective thermal conductivity of three-dimensional dendritic regions by the finite element method
23
Prediction of the effective Young’s modulus of a particulate composite containing fractured particles
24
Prediction of the Effects of Combustion–Generated Pollutant on Human Health: Mathematical Models and Numerical Solutions
25
Prediction of the effects of cone tip diameter on the cyclone performance
26
Prediction of the effects of hardening and texture heterogeneities by finite element analysis based on the Taylor model
27
Prediction of the effects of methanol and competing ion concentration on retention in the ion chromatographic separation of anionic and cationic pharmaceutically related compounds
28
Prediction of the effects of neutron irradiation on the Charpy ductile to brittle transition curve of an A508 pressure vessel steel
29
Prediction of the effects of particle and matrix morphologies on Al2O3 particle/polymer composites by finite element method
30
Prediction of the effects of soil-based countermeasures on soil solution chemistry of soils contaminated with radiocesium using the hydrogeochemical code PHREEQC
31
Prediction of the effects of thermal ageing on the embrittlement of reactor pressure vessel steels
32
Prediction of the Efficiency of Hydraulic Fracturing Based on Reservoir Parameters
33
Prediction of the Elastic Modulus of Wood FlourlKenaf Fibre/Polypropylene Hybrid Composites.
34
Prediction of the elastic properties of single walled carbon nanotube reinforced polymers: A comparative study of several micromechanical models
35
Prediction of the elastic properties of syntactic perforated hollow sphere structures
36
Prediction of the elastic properties profile in glass-alumina functionally graded materials
37
Prediction of the elastic response of polymer based nanocomposites: a mean field approach and a discrete simulation
38
Prediction of the elastic strain limit of tendons
39
Prediction of the elastic–plastic behavior of thermoplastic composite laminated plates ([0°/θ°]2) with square hole
40
Prediction of the elasto-plastic post-buckling strength of uniformly compressed plates from the fictitious elastic strain at failure
41
Prediction of the Electricity Demand in the Market: An Application of Optimization and Machine Learning
42
PREDICTION OF THE ELECTROMAGNETIC FIELD IN METALLIC ENCLOSURES USING ARTIFICIAL NEURAL NETWORKS
43
Prediction of the electromagnetic noise of an asynchronous machine using experimental designs Original Research Article
44
Prediction of the electrophoretic mobilities of some carboxylic acids from theoretically derived descriptors
45
Prediction of the emission wavelengths of metal-organic triplet emitters by quantum chemical calculations
46
Prediction of the energy balance and milk production of grazing cows in the Azores for autumn and spring calving
47
Prediction of the energy consumption of household refrigerators and freezers via steady-state simulation
48
Prediction of the energy dissipation rate in ductile crack propagation
49
Prediction of the energy value of cattle diets based on the chemical composition of the feeds under tropical conditions
50
Prediction of the energy value of rabbit feeds varying widely in fibre content
51
Prediction of the enthalpy of vaporization by the group contribution method
52
Prediction of the enthalpy of vaporization of metals and metalloids
53
Prediction of the entrained liquid fraction in vertical annular gas–liquid two-phase flow
54
Prediction of the entrainment of ambient air into a turbulent argon plasma jet using a turbulence-enhanced combined-diffusion-coefficient method
55
Prediction of the environmental effects of excess nitrogen caused by increasing food demand with rapid economic growth in eastern Asian countries, 1961–2020
56
Prediction of the environmental effects of excess nitrogen caused by increasing food demand with rapid economic growth in eastern Asian countries, 1961–2020
57
Prediction of the Epidemiological Situation of Tuberculosis in Slovakia by 2040- Data Update
58
Prediction of the estrous cycle and optimal insemination time by monitoring vaginal electrical resistance (VER) in order to improve the reproductive efficiency of the Okinawan native Agu pig
59
Prediction of the ethanol yield of dry-grind maize grain using near infrared spectroscopy
60
Prediction of the European beech (Fagus sylvatica L.) xeric limit using a regional climate model: An example from southeast Europe
61
Prediction of the excess volume and isobaric thermal expansion for 1-alkanol + n-alkane systems in terms of an association model with a Flory contribution term
62
Prediction of the Experimental Data for Removal of Organic Pesticides by Carbon Nanoparticle Synthesized from Pomegranate Peel using Artificial Neural Networks
63
Prediction of the extent and severity of left ventricular dysfunction in anterior acute myocardial infarction by the admission electrocardiogram
64
Prediction of the extent of diluents concentrations in flammability limited gaseous fuel–diluent mixtures in air
65
Prediction of the extraction energy of an atom from the surface of Fe–Cr alloys using topological descriptors
66
Prediction of the factors influencing cervical cancer screening using the extended protection motivation model: A path analysis
67
Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics
68
Prediction of the failure metal/composite bonded joints
69
Prediction of the failure properties of short fiber reinforced composites with metal and polymer matrix
70
Prediction of the Failure Time of Glass Fiber Reinforced Plastic Reinforced Concrete Beams under Fire Conditions
71
Prediction of the Fatal Acute Complications of Myocardial Infarction via Machine Learning Algorithms
72
Prediction of the fate of alcohol ethoxylates in sewage treatment plants
73
Prediction of the fate of p,p′-DDE in sediment on the Palos Verdes shelf, California, USA
74
Prediction of the fate of radioactive material in the South Pacific Ocean using a global high-resolution ocean model
75
Prediction of the fatigue life of a notched body by the local stress-strain state. Part 1. Determination of stresses and strains in a notch under elastoplastic cyclic deformation
76
Prediction of the fatigue life of a notched body by the local stress-strain state. Part 2. Determination of a parameter representing the fatigue life of bodies with stress concentrators
77
Prediction of the fatigue life of unidirectional glass fiber/epoxy composite laminae using different neural network paradigms
78
Prediction of the fatigue life on the basis of damage progress rate curves
79
Prediction of the fatigue limit of blunt-notched components
80
PREDICTION OF THE FATIGUE LIMIT OF CRACKED SPECIMENS BASED ON THE CYCLIC R-CURVE METHOD
81
Prediction of the fatigue-damaged behaviour of Al/Al2O3 composites by a micro–macro approach
82
Prediction of the fatty acid composition of beef by near infrared transmittance spectroscopy
83
Prediction of the feeding value of grass silages by chemical parameters, in vitro digestibility and near-infrared reflectance spectroscopy
84
Prediction of the feeding value of maize silages by chemical parameters, in vitro digestibility and NIRS
85
Prediction of the fine-scale irregular structure in Saturn’s A, B, and C rings Original Research Article
86
Prediction of the fish acute toxicity from heterogeneous data coming from notification files
87
Prediction of the fixed-bed reactor behaviour using dispersion and plug-flow models with different kinetics for immobilised enzyme
88
Prediction of the flexural strengths of welded H-sections with local buckling
89
Prediction of the flow around the X-31 aircraft using three different CFD methods
90
Prediction of the flow over a circular cylinder at high Reynolds number using detached-eddy simulation
91
Prediction of the flow stress and grain size of steel during thick-plate rolling
92
Prediction of the flow stress of 0.4C–1.9Cr–1.5Mn–1.0Ni–0.2Mo steel during hot deformation
93
Prediction of the flow stress of 6061 Al–15% SiC – MMC composites using adaptive network based fuzzy inference system
94
Prediction of the flow stress of Al6061 at hot deformation conditions
95
Prediction of the flow stress of high-speed steel during hot deformation using a BP artificial neural network
96
Prediction of the flow structure in a turbulent rectangular free jet
97
Prediction of the FOM FEM experimental results using multi-mode time-dependent simulations
98
Prediction of the FOM FEM experimental results using multi-mode time-dependent simulations
99
Prediction of the forming limit in hydroforming processes using the finite element method and a ductile fracture criterion
100
Prediction of the fracture load of whole proximal femur specimens by topological analysis of the mineral distribution in DXA-scan images
101
Prediction of the fracture of metals in processes of cold plastic deformation. Part 2. Effect of anisotropic hardening and experimental verification of the model of plastic deformation and fracture
102
Prediction of the fracture of metals in the processes of cold plastic deformation. Part 1. Approximate model of plastic deformation and fracture of metals
103
Prediction of the fracture performance of defect-free steel bars for civil engineering applications using finite element simulation
104
Prediction of the fracture toughness of a ceramic multilayer composite – Modeling and experiments Original Research Article
105
Prediction of the freezing point of multicomponent liquid refrigerant solutions Original Research Article
106
Prediction of the frequency dependence of the magnetic permeability at low fields in magnetic amorphous ribbons
107
Prediction of the fretting fatigue resistance of various surface-modification layers on 1045 steel: the role of fretting maps
108
Prediction of the frictional behavior of mammalian tissues against biomaterials
109
Prediction of the frost formation on a cold flat surface
110
Prediction of the fuel impact associated with performance degradation in power plants
111
Prediction of the functional properties of ceramic materials from composition using artificial neural networks
112
Prediction of the gas–condensate well productivity
113
Prediction of the gaseous thermal conductivity in aerogels with non-uniform pore-size distribution
114
Prediction of the gasification kinetics of a single wood char particle from a limited set of parameters
115
Prediction of the gas–liquid volumetric mass transfer coefficients in surface-aeration and gas-inducing reactors using neural networks
116
Prediction of the general health of Internet user students based on the dependence on the Internet (Case Study: Tehran and Baku)
117
Prediction of the genetic variety of Spanish extra virgin olive oils using fatty acid and phenolic compound profiles established by direct infusion mass spectrometry
118
Prediction of the geographical origin of butters by partial least square discriminant analysis (PLS-DA) applied to infrared spectroscopy (FTIR) data
119
Prediction of the geographical origin of butters by partial least square discriminant analysis (PLS-DA) applied to infrared spectroscopy (FTIR) data
120
Prediction of the geomechanical state of the rock mass when mining salt deposits with stowing
121
Prediction of the glass forming ability in Cu–Zr binary and Cu–Zr–Ti ternary alloys
122
Prediction of the glass transition in aqueous solutions of simple amides by molecular dynamics simulations
123
Prediction of the glass transition temperature of (meth)acrylic polymers containing phenyl groups by recursive neural network
124
Prediction of the glass transition temperatures for epoxy resins and blends using group interaction modelling
125
Prediction of the Grade of Acute Cholecystitis by Plasma Level of C-Reactive Protein
126
Prediction of the grain size of Cd–Mn–S nanocrystalline structures
127
PREDICTION OF THE GROWTH OF NEAR-SURFACE FATIGUE CRACKS
128
PREDICTION OF THE GROWTH OF NEAR-SURFACE FATIGUE CRACKS
129
Prediction of the growth of wear-type rail corrugation
130
Prediction of the growth rate for fatigue cracks emanating from cold expanded holes
131
Prediction of the GTPase activities by using the semiempirical molecular orbital theory
132
Prediction of the handedness of the chiral domains of amphiphilic monolayers: monolayers of amino acid amphiphiles
133
Prediction of the handedness of the domains of monolayers of d-N-palmitoyl aspartic acid: Integrated molecular orbital and molecular mechanics based calculation
134
Prediction of the Harmonic Distortion in Mosfet Gate Capacitors
135
Prediction of the heat of mixing for binary fluids using molecular dynamics simulation
136
Prediction of the heat transfer coefficient for ice slurry flows in a horizontal pipe
137
Prediction of the heat transfer rate of a single layer wire-on-tube type heat exchanger using ANFIS
138
Prediction of the Hildebrand parameter of various solvents using linear and nonlinear approaches
139
Prediction of the hip joint centre in adults, children, and patients with cerebral palsy based on magnetic resonance imaging
140
Prediction of the horizontal stress of the tight sandstone formation in eastern Sulige of China
141
Prediction of the hot deformation behavior for Aermet100 steel using an artificial neural network
142
Prediction of the human response time with the similarity and quantity of information
143
Prediction of the human response time with the similarity and quantity of information
144
Prediction of the hydraulic diffusivity from pore size distribution of concrete
145
Prediction of the hydraulic jump length on sloping rough beds using meta heuristic neurofuzzy model and differential evolution algorithm
146
Prediction of the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling
147
Prediction of the identity of fats and oils by their fatty acid, triacylglycerol and volatile compositions using PLS-DA
148
Prediction of the Impact of Bank Failure Risk on Micro-Credit in Iran: An Artificial Intelligence Approach
149
Prediction of the impact of logging activities on forest cover : A case-study in the East province of Cameroon
150
Prediction of the impact of the Aznalc´ollar toxic spill on the trace element contamination of agricultural soils
151
Prediction of the in vitro gas production and chemical composition of kikuyu grass by near-infrared reflectance spectroscopy
152
Prediction of the in vitro gas production dynamics of kikuyu grass by near-infrared reflectance spectroscopy using spectrally-structured sample populations
153
Prediction of the in vivo digestibility of whole crop wheat from in vitro digestibility, chemical composition, in situ rumen degradability, in vitro gas production and near infrared reflectance spectroscopy
154
Prediction of the Infarct-Related Artery in Acute Myocardial Infarction by a Scoring System Using Summary ST-Segment and T-Wave Changes
155
Prediction of the influence of flaws on the fatigue strength under biaxial loading
156
Prediction of the influence of the heat generated by viscous friction on the efficiency of chromatography columns
157
Prediction of the influence of yield locus on the limit strains in sheet metals
158
Prediction of the Influential Factors on Eating Behaviors: A Hybrid Model of Structural Equation Modelling-Artificial Neural Networks
159
Prediction of the initial stiffness of ductile end-plate steel connections
160
Prediction of the initial thickness of shear band localization based on a reduced strain gradient theory
161
Prediction of the in-situ dust measurements of the stardust mission to comet 81P⧸Wild 2
162
Prediction of the interfacial shear stress of externally bonded FRP to concrete substrate using critical stress state criterion
163
Prediction of the interfacial shear-stress in vertical annular flow
164
PREDICTION OF THE INTERFERENCE LEVEL FROM A LOW-POWER RADIO DEVICE PROVOKING THE INTERMODULATION INTERFERENCE TO THE AMPS RECEIVER
165
Prediction of the intramuscular fat content in loin muscle of pig carcasses by quantitative time-resolved ultrasound
166
Prediction of the Inversion Curve and the Maximum Value of μJ–T for Some Refrigerants
167
Prediction of the ischemic origin of functional mitral regurgitation in patients with systolic heart failure through posterior mitral leaflet angle
168
Prediction of the Isothermal Sections in the ZrO2-YO(1.5)-CeO2 System
169
Prediction of the kinetics, equilibrium and thermodynamic parameters of adsorption of copper(II) ions onto 8-hydroxy quinoline immobilized bentonite
170
Prediction of the Krichevskii parameter for volatile nonelectrolytes in water
171
Prediction of the Lee retention indices of polycyclic aromatic hydrocarbons by artificial neural network
172
Prediction of the life expectancy of organic covers
173
Prediction of the Lifting Forces for Cassava Harvesting
174
Prediction of the liftoff, blowout and blowoff stability limits of pure hydrogen and hydrogen/hydrocarbon mixture jet flames
175
Prediction of the Liquid Vapor Pressure Using the Artificial Neural Network-Group Contribution Method
176
Prediction of the LISA-Pathfinder release mechanism in-flight performance Original Research Article
177
Prediction of the longitudinal crack behavior of stiffened curved panels
178
Prediction of the longitudinal tensile strength of polymer matrix composites
179
Prediction of the long-term strength of pipeline metal taking account of crack development under creep conditions
180
Prediction of the Long-Term Strength of Various Classes of Metallic Materials
181
Prediction of the Lüders band in fine grained steel strips under uniaxial tension
182
Prediction of the main caving span in longwall mining using fuzzy MCDM technique and statistical method
183
Prediction of the mass loss rate of polymer materials: Impact of residue formation
184
Prediction of the maximal tolerated dose (MTD) and therapeutic effect of anticancer drugs in humans: integration of pharmacokinetics with pharmacodynamics and toxicodynamics
185
Prediction of the maximum heat transfer capability of two-phase heat spreaders – Experimental validation
186
Prediction of the maximum-efficiency cyclone length for a cyclone with a tangential entry
187
Prediction of the mean folding force during the axial compression in foam-filled grooved tubes by theoretical analysis
188
Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling Original Research Article
189
Prediction of the mechanical behavior of the Oporto granite using Data Mining techniques
190
Prediction of the mechanical behaviour of porous ceramics using mesomechanical modelling
191
Prediction of the mechanical characteristics of multi-walled carbon nanotube/epoxy composites using a new form of the rule of mixtures Original Research Article
192
Prediction of the mechanical performance of McKibben artificial muscle actuator
193
Prediction of the mechanical performance of McKibben artificial muscle actuator
194
Prediction of the mechanical properties of forged TC11 titanium alloy by ANN
195
Prediction of the mechanical properties of forged Ti–10V–2Fe–3Al titanium alloy using FNN
196
Prediction of the mechanical properties of micro-lattice structures subjected to multi-axial loading
197
Prediction of the mechanical properties of micro-lattice structures subjected to multi-axial loading
198
Prediction of the mechanical properties of the post-forged Ti–6Al–4V alloy using fuzzy neural network
199
Prediction of the mechanical response of polycrystalline ceramics containing metallic intergranular layers under uniaxial tension
200
Prediction of the melting points for two kinds of room temperature ionic liquids
201
Prediction of the metabolizable energy value of whole-crop wheat from laboratory-based measurements
202
Prediction of the metallurgical performances of a batch flotation system by image analysis and neural networks
203
Prediction of the micro-fluid dynamic environment imposed to three-dimensional engineered cell systems in bioreactors
204
Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear fuel plates with heterogeneous particle distributions
205
Prediction of the moment capacity of pier foundations in clay using neural networks
206
Prediction of the morphology of Mg32(Al, Zn)49 precipitates in a Mg–Zn–Al alloy
207
PREDICTION OF THE MORPHOLOGY OF SEMI-CRYSTALLINE THERMOPLASTICS
208
Prediction of the mutation-induced change in thermodynamic stabilities of membrane proteins from free energy simulations Original Research Article
209
Prediction of the mutual solubilities of hydrocarbons and water with COSMO-RS
210
Prediction of the mutual solubility of water and dipropylene glycol dimethyl ether using molecular dynamics simulation
211
Prediction of the naturalisation potential and weediness risk of transgenic cotton in Australia
212
Prediction of the need for laparotomy considering clinical and laboratory findings in abdominal blunt trauma patients referred to Rajaei hospital in year 2017 and 2018
213
Prediction of the neurophysiological diagnosis of carpal tunnel syndrome from the demographic and clinical data
214
Prediction of the non-ideal detonation performance of commercial explosives using the DeNE and JWL++ codes
215
Prediction of the nonlinear transient and oscillatory rheological behavior of flour suspensions using a strain-separable integral constitutive equation
216
Prediction of the nonlocal scaling parameter for graphene sheet
217
Prediction of the no-reflow phenomenon with ultrasonic tissue characterization in patients with anterior wall acute myocardial infarction
218
Prediction of the nutrients value and biochemical characteristics of swine slurry by measurement of EC – Electrical conductivity
219
Prediction of the nutritional value of European compound feeds for rabbits by chemical components and in vitro analysis
220
Prediction of the nutritive value of lucerne hay in diets for growing rabbits
221
Prediction of the onset of caking in sucrose from temperature induced moisture movement Original Research Article
222
Prediction of the onset of mode III delamination in carbon-epoxy laminates
223
Prediction of the onset of nucleate boiling in microchannel flow
224
Prediction of the Operating Conditions in a Batch Distillation Column Using a Shortcut Method
225
Prediction of the optimal time for insemination using frozen-thawed semen in a multi-sire insemination trial in bitches
226
Prediction of the optimized welding parameters for the joined brass plates using genetic algorithm
227
Prediction of the optimum aqueous phase composition of a triglyceride microemulsion using response surface methodology
228
Prediction of the ordering behaviours of the orthorhombic phase based on Ti2AlNb alloys by combining thermodynamic model with ab initio calculation
229
Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model
230
Prediction of the outcome of short- and long-term psychotherapy based on socio-demographic factors
231
Prediction of the overall moduli of layered silicate-reinforced nanocomposites—part I: basic theory and formulas
232
Prediction of the overall moduli of layered silicate-reinforced nanocomposites—part II: analyses
233
Prediction of the overall sieve tray efficiency for a group of hydrocarbons, an artificial neural network approach
234
Prediction of the packing porosity of mixtures of spherical and non-spherical particles with a geometric model
235
Prediction of the parallel/antiparallel orientation of beta-strands using amino acid pairing preferences and support vector machines
236
PREDICTION OF THE PARAMETERS RADIAL CENTRIFUGAL PUMPS WITH ARTIFICIAL NEURAL NETWORKS
237
Prediction of the partitioning behaviour of proteins in aqueous two-phase systems using only their amino acid composition
238
Prediction of the penetrometer resistance of soils with models with few parameters
239
Prediction of the perfectionism by proposed model for abnormal personality dimensions
240
Prediction of the perfectionism by proposed model for abnormal personality dimensions
241
Prediction of the performance of a shower cooling tower based on projection pursuit regression
242
Prediction of the performance of a solar water detoxification system under Malaysian climatic conditions
243
Prediction of the performance of a solid oxide fuel cell fuelled with biosyngas: Influence of different steam-reforming reaction kinetic parameters
244
Prediction of the performance of an algorithm for the detection of small targets in infrared images
245
Prediction of the performance of dense medium cyclones in coal preparation
246
Prediction of the performances of finely segmented Si detector for tracking applications in future super-colliders after severe radiation damage
247
Prediction of the performances of finely segmented Si detector for tracking applications in future super-colliders after severe radiation damage
248
Prediction of the permittivity of random composites by morphological modeling
249
Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models
250
Prediction of the phase behavior of alkene-containing binary systems with the PPR78 model
251
Prediction of the phase transition from ferromagnetic perovskite to non-magnetic post-perovskite in SrRuO3 : A first-principles study
252
Prediction of the physicochemical properties of gasoline by comprehensive two-dimensional gas chromatography and multivariate data processing
253
Prediction of the physicochemical properties of quince puree during thermal treatment using M5 decision tree
254
Prediction of the plastic viscosity of self-compacting steel fibre reinforced concrete
255
Prediction of the plate height of capillary columns operated at any inlet pressure of the carrier gas by using few retention data measured under isobaric conditions
256
Prediction of the Port wine age using an electronic tongue
257
Prediction of the pose errors produced by joints clearance for a 3-UPU parallel robot
258
Prediction of the position of the intraparotid portion of the facial nerve on MRI and CT
259
Prediction of the postbuckling response of composite airframe panels including ply failure
260
Prediction of the post-peak behavior of reinforced concrete columns with and without FRP-jacketing
261
Prediction of the potency of inhibitors of adenosine deaminase by QM/MM calculations
262
Prediction of the potential fates of future pharmaceutical compounds in indirect potable reuse systems Original Research Article
263
Prediction of the Presence of Lipid Derivatives in Follicular Fluid and Reproductive Outcome among Infertile Women by MALDI Mass Spectrometry Method
264
Prediction of the pressure dependence on the thermodynamic properties of dialkyl carbonate + alkane mixtures using Nitta–Chao model
265
Prediction of the pressure distribution on a cubical building with implicit LES
266
Prediction of the Pressure-Induced Phase Transition in GaAs by the Positron Affinity
267
Prediction of the pressure–volume–temperature equation of state for zinc-blende ZnO from quasi-harmonic Debye model
268
Prediction of the process parameters of metal powder preform forging using artificial neural network (ANN)
269
Prediction of the production of nitrogen oxide (NOx) in turbojet engines
270
Prediction of the Production Rate of Chain Saw Machine using the Multilayer Perceptron (MLP) Neural Network
271
Prediction of the Products Yield of Delayed Coking for Iranian Vacuum Residues
272
Prediction of the progress of solid-state reactions under different temperature modes
273
Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates
274
PREDICTION OF THE PROPERTIES OF POROUS MATERIALS WITH THE AID OF THE METHOD OF MATHEMATICAL DESIGN OF EXPERIMENTS
275
PREDICTION OF THE PROPERTIES OF POROUS MATERIALS WITH THE AID OF THE METHOD OF MATHEMATICAL DESIGN OF EXPERIMENTS
276
Prediction of the properties of Spanish lignocellulosic briquettes by means of dispersive X-ray fluorescence
277
Prediction of the punch reversal position under V-plate bending using real material (power-law) behavior
278
Prediction of the Punching Load Strength of SCS Slabs with Stud-Bolt Shear Connectors Using Numerical Modeling and GEP Algorithm
279
Prediction of the PVT properties of water over wide range of temperatures and pressures from molecular dynamics simulation
280
Prediction of the quadruple hamstring autograft thickness in ACL reconstruction using anthropometric measures
281
Prediction of the quality of forage maize by near-infrared reflectance spectroscopy
282
Prediction of the quality of life in the adolescents with diabetes based on self-efficacy
283
Prediction of the rate of oil removal from seawater by evaporation and dissolution
284
Prediction of the rates of fertilization, cleavage, and pregnancy success by cumulus-coronal morphology in an in vitro fertilization program
285
Prediction of the recurrence of atrial fibrillation after cardioversion in the Atrial Fibrillation Follow-up Investigation of Rhythm Management (AFFIRM) study
286
Prediction of the relationship between the rate of deformation and the rate of stress relaxation in glassy polymers
287
Prediction of the relative activity levels of the actinides in a fallout from a nuclear reactor accident
288
Prediction of the relative permeability of gases in mixed matrix membranes
289
Prediction of the relative permeability to gas flow of cement-based materials
290
Prediction of the remaining service lifetime of inflatable rubber dam with deep hole damage
291
Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network
292
Prediction of the residual tensile strengths of carbon-fiber/epoxy laminates with and without interleaves after solid particle erosion
293
Prediction of the resolution of capillary columns in different conditions of inlet pressure and temperature
294
Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field
295
Prediction of the retention in thin layer chromatography screening systems by atomic contributions Original Research Article
296
Prediction of the retention values associated to the ultrafiltration of mixtures of metal ions and high molecular weight water-soluble polymers as a function of the initial ionic strength
297
Prediction of the retentions of polybrominated dibenzo-p-dioxins (PBDDs) by using the retentions of polychlorinated dibenzo-p-dioxins (PCDDs)
298
Prediction of the reverberation absorption coefficient of finite-size membrane absorbers
299
Prediction of the reverberation time in high absorbent room using a modified-diffusion model
300
Prediction of the rheological properties of polymers using a stochastic simulation Original Research Article
301
Prediction of the risk of hepatic failure in patients with portal vein invasion hepatoma after hepatic resection
302
PREDICTION OF THE SAR LEVEL INDUCED IN A DIELECTRIC SPHERE BY A THIN WIRE DIPOLE ANTENNA
303
Prediction of the SARA analysis of Colombian crude oils using ATR–FTIR spectroscopy and chemometric methods
304
Prediction of the scattering properties of surfaces by laser scanning of height profile
305
Prediction of the second cross virial coefficients of nonpolar binary mixtures
306
Prediction of the selectivity coefficients of a berberine selective electrode using artificial neural networks
307
Prediction of the selectivity in the recovery of transesterification reaction products using supported liquid membranes based on ionic liquids
308
Prediction of the separation number of capillary columns in programmed temperature gas chromatographic analysis Original Research Article
309
Prediction of the separation of phenols by capillary zone electrophoresis Original Research Article
310
Prediction of the settling velocity of irregularly shaped particles
311
Prediction of the shielding and resonant behavior of multisection enclosures based on magnetic current modeling
312
Prediction of the short-term strength of polymer materials based on equations of state
313
Prediction of the single-phase turbulent mixing rate between two parallel subchannels using a subchannel geometry factor Original Research Article
314
Prediction of the site occupations of the ThMn12-type intermetallics YFe12−xMox by combining thermodynamic model with ab-initio calculations
315
Prediction of the site of total occlusion in the left anterior descending coronary artery using admission electrocardiogram in anterior wall acute myocardial infarction
316
Prediction of the site ordering behaviours of elements in C15 NbCr2-based intermetallics by combining thermodynamic model with ab-initio calculation
317
Prediction of the size distribution of secondary ejected droplets by crown splashing of droplets impinging on a solid wall
318
Prediction of the size of silver nanoparticles prepared via green synthesis: A gene expression programming approach
319
Prediction of the slip zone friction coefficient in flat and rounded contact
320
Prediction of the S–N curves of high-strength steels in the very high cycle fatigue regime
321
Prediction of the softening and damage effects with permanent set in fibrous biological materials
322
PREDICTION OF THE SOIL EROSIONINTENSITY FROM THE RIVER BASIN NAVOTINSKI, POLIMLJE (NORTHEAST MONTENEGRO)
323
Prediction of the soil sorption coefficient of organic pollutants by the characteristic root index model
324
Prediction of the soil structures produced by tillage
325
Prediction of the soil-depth salinity-trend in a vineyard after sustained irrigation with saline water
326
Prediction of the solar radiation on the Earth using support vector regression technique
327
Prediction of the solubility and gas-liquid equilibria for gas-water and light hydrocarbonwater systems at high temperatures and pressures with a group contribution equation of state
328
Prediction of the solubility of aromatic components of wine in carbon dioxide
329
Prediction of the solubility of H2S in NaCl aqueous solution: an equation of state approach
330
Prediction of the solubility of quartz in salt solutions from 25 °C to 900 °C using the 3-parameter Non-Random Two-Liquid (NRTL) model
331
Prediction of the soluble myoglobin content of cooked burgers
332
Prediction of the sound field into high-rise building facades due to its balcony ceiling form
333
Prediction of the sound reduction index: a modal approach
334
Prediction of the spatial decay of speech in open-plan offices
335
Prediction of the specific volume of polymeric systems using the artificial neural network-group contribution method
336
Prediction of the speech intelligibility index behind a single screen in an open-plan office
337
Prediction of the speed of sound in the ethanol+n-heptane system: New application of the Extended Real Associated Solution model
338
Prediction of the spray scrubbers’ performance in the gaseous and particulate scrubbing processes
339
Prediction of the spread of highly pathogenic avian influenza using a multifactor network: Part 1 – Development and application of computational fluid dynamics simulations of airborne dispersion
340
Prediction of the spread of highly pathogenic avian influenza using a multifactor network: Part 2 – Comprehensive network analysis with direct/indirect infection route
341
Prediction of the spreading mechanism of 3D turbulent wall jets with explicit Reynolds–stress closures
342
Prediction of the squash loads of concrete-filled tubular section columns with local buckling
343
Prediction of the standardized ileal true digestibility of amino acids from the chemical composition of oilseed meals in the growing pig
344
Prediction of the static fracture strength of hole notched plain weave CFRP composites
345
Prediction of the strength of bolted cold-formed channel sections in tension
346
Prediction of the strength of mineral admixture concrete using multivariable regression analysis and an artificial neural network
347
Prediction of the strength of notched fiber-dominated composite laminates
348
Prediction of the Strength of Steel Pipes Damaged by Aqueous Corrosion
349
Prediction of the strength of the elderly proximal femur by bone mineral density and quantitative ultrasound measurements of the heel and tibia
350
Prediction of the Stress-Relaxation Behavior of Thermoshrinkable Radiation-Modified Polymer Materials
351
Prediction of the stress-strain state and stability of the front of tunnel face at the intersection of disturbed zones of the soil mass
352
Prediction of the Structural and Spectral Properties and Reactivity of the Silicon Analogs of Cyclobutadiene C4-nSinH4 (n=0-4) by Density Functional Theory Computations
353
Prediction of the Structural and Spectral Properties and Reactivity of the Silicon Analogs of Cyclobutadiene C4-nSinH4 (n=0-4) by Density Functional Theory Computations
354
Prediction of the structural and spectral properties for L, L-ethylenedicysteine diethylester (EC) and its complex with Technetium-99m radionuclide
355
Prediction of the Students’ Intention to the Consumption of Soft Drinks: Using the Extended Parallel Process Model
356
Prediction of the subcellular location of apoptosis proteins
357
Prediction of the Supersonic Flow Base Pressure by Axisymmetric Direct Numerical Simulation
358
Prediction of the surface tension for refrigerants and refrigerant-oil solutions (ROS)
359
Prediction of the surface tension of deep eutectic solvents
360
Prediction of the surface tension of petroleum cuts using a modified UNIFAC group contribution method
361
Prediction of the Surface Tension of Refrigerants and Their Binary Mixtures
362
Prediction of the surface tension, surface concentration, and the relative Gibbs adsorption isotherm of binary liquid systems
363
Prediction of the Temperature and Density Dependences of the Parameters of the Average Effective Binary Mixture Pair Potential Using Only the LIR Equation of State
364
Prediction of the temperature dependence of a polyether–water mixture using COSMOtherm
365
Prediction of the temperature dependence of binary diffusion coefficients of gaseous systems from thermal diffusion factors and diffusion coefficients at 300 K
366
Prediction of the temperature dependency of Henry’s law constant using poly-parameter linear free energy relationships
367
Prediction of the temperature field in flat plate heat pipes with micro-grooves – Experimental validation
368
Prediction of the temperature in a fin cooled by natural convection and radiation
369
PREDICTION OF THE TEMPERATURE OF THE HOLE DURING THE DRILLING PROCESS USING ARTIFICIAL NEURAL NETWORKS
370
Prediction of the Tendency to Smoke Based on Emotional Dyslexia and Cognitive Control
371
Prediction of the tensile stiffness of weft knitted fabric composites based on X-ray tomography images
372
Prediction of the theoretical capacity of non-aqueous lithium-air batteries
373
Prediction of the thermal conductivities of four-axial non-woven composites
374
Prediction of the Thermal Conductivity and Viscosity of Binary and Ternary HFC Refrigerant Mixtures
375
Prediction of the Thermal Conductivity of Gas Mixtures at Low Pressures
376
Prediction of the thermal conductivity of gases based on the Rainwater–Friend theory and a new corresponding states function
377
Prediction of the thermal conductivity of metal hydrides – The inverse problem
378
Prediction of the thermal decomposition property of polymers using quantum chemical descriptors
379
Prediction of the thermal properties of CO2, CO, and Xe laser media
380
Prediction of the thermodynamic properties and the phase behavior of binary mixtures in the extended critical region
381
Prediction of the thermodynamic properties for the Ga–Sb–Pb ternary system
382
Prediction of the thermodynamic properties for the Ga–Sb–Pb ternary system
383
Prediction of the thermodynamic properties of {ammonia + water} using cubic equations of state with the SOF cohesion function
384
Prediction of the thermodynamic properties of binary continuous solid solutions by infinite dilute activity coefficients
385
Prediction of the thermodynamic properties of metal–chromate aqueous complexes to high temperatures and pressures and implications for the speciation of hexavalent chromium in some natural waters
386
Prediction of the thermodynamic properties of quaternary liquid alloys by modified coordination equation
387
Prediction of the thermodynamic properties of quinary liquid alloys by modified coordination equation
388
Prediction of the thermodynamic properties of solutes in Pb-based dilute solutions
389
Prediction of the three-year course of recurrent depression in primary care patients: Different risk factors for different outcomes
390
Prediction of the threshold load of dislocation emission in silicon during nanoscratching Original Research Article
391
Prediction of the Thromboembolic Syndrome: an Application of Artificial Neural Networks in Gene Expression Data Analysis
392
Prediction of the time evolution of pH in meat
393
Prediction of the time of room air temperature descending for heating systems in buildings
394
Prediction of the time-course pattern of remission in depression by using clinical, neuropsychological, and genetic variables
395
Prediction of the torsional strength of the hybrid aluminum/composite drive shaft
396
Prediction of the total tract digestibility of energy in feedstuffs and pig diets by in vitro analyses
397
Prediction of the Trace Amounts of Atomoxetine in Biological Samples using Optimized Solvent Bar Microextraction Technique Coupled with HPLC-UV
398
Prediction of the tractive performance of a flexible tracked vehicle
399
Prediction of the transition from stratified to slug and plug flow for long pipes
400
Prediction of the transition from stratified to slug flow or roll-waves in gas–liquid horizontal pipes
401
Prediction of the transport properties of a polyatomic gas
402
Prediction of the two-tone suppression and intermodulation performance of auditory systems
403
Prediction of the type of milk and degree of ripening in cheeses by means of artificial neural networks with data concerning fatty acids and near infrared spectroscopy
404
Prediction of the uniaxial tensile curve of 4-step 3-dimensional braided preform
405
Prediction of the Unified Parkinson’s Disease Rating Scale assessment using a genetic programming system with geometric semantic genetic operators
406
Prediction of the Vapor Pressure of Environmentally Acceptable Halocarbons1
407
Prediction of the vapor–liquid distribution constants for volatile nonelectrolytes in water up to its critical temperature
408
Prediction of the vapor–liquid equilibria and speed of sound in binary systems of 1-alkanols and n-alkanes with the simplified PC-SAFT equation of state
409
Prediction of the variation of elastic modulus in ZrO2/NiCr functionally graded materials
410
Prediction of the vegetation management impacts on reduction of wind erosion risk in the southern parts of the Varamin Plain, Iran
411
Prediction of the vibration characteristics of a full-size structure from those of a scale model
412
Prediction of the vibration characteristics of half-track tractor considering a three-dimensional dynamic model
413
Prediction of the viscoelastic properties of the equivalent particle for the intercalated multi-layer stack of nanoplastics
414
Prediction of the viscosity of clarified fruit juice using artificial neural network: a combined effect of concentration and temperature Original Research Article
415
Prediction of the Viscosity of Liquid Mixtures
416
Prediction of the Viscosity of Liquid Mixtures: An Improved Approach1
417
Prediction of the Viscosity of Supercritical Fluid Mixtures
418
Prediction of the Viscosity Radius and the Size Exclusion Chromatography Behavior of PEGylated Proteins
419
Prediction of the viscosity reduction due to dissolved CO2 of and an elementary approach in the supercritical CO2 assisted continuous particle production of a polyester resin
420
Prediction of the volumetric and thermodynamic properties of some refrigerants using GMA equation of state
421
Prediction of the Warm Prestressing Effect on an Increase in the Brittle Strength of Crack-Containing Heat-Resistant Structural Steels. Part 1. Model and Procedure of Calculating the Warm Prestressing Effect
422
Prediction of the waste stabilization pond performance using linear multiple regression and multi-layer perceptron neural network: a case study of Birjand, Iran
423
Prediction of the water absorption by aggregates over time: Modelling through the use of value function and experimental validation
424
Prediction of the water balance of two soil cover systems
425
Prediction of the water sorption isotherm in air dry soils
426
PREDICTION OF THE WEAR RATE OF RUBBING BODIES ON THE BASIS OF A THEORETICAL-INVARIANT METHOD
427
PREDICTION OF THE WEAR RATE OF RUBBING BODIES ON THE BASIS OF A THEORETICAL-INVARIANT METHOD
428
Prediction of the Weight and Number of Eggs in Mazandaran Native Fowl Using Artificial Neural Network
429
Prediction of the Weight and Number of Eggs in Mazandaran Native Fowl Using Artificial Neural Network
430
Prediction of the wettability characteristics of some minerals from their breakage parameters
431
Prediction of the work-hardening exponent for ultrafine-grained steels
432
Prediction of the working parameters of a wood waste gasifier through an equilibrium model
433
Prediction of the Wrist Joint Position During a Postural Tremor Using Neural Oscillators and an Adaptive Controller
434
Prediction of the yield of biohydrogen under scanty data conditions based on GM(1,N)
435
Prediction of the yield strength of a secondary-hardening steel Original Research Article
436
Prediction of theoretical plate number in isothermal gas chromatographic analysis on capillary columns
437
Prediction of therapeutic and drug delivery outcomes using animal models
438
Prediction of thermal and fluid flow characteristics in helically coiled tubes using ANFIS and GA based correlations
439
Prediction of thermal coagulation by AC inductive heating of Mg1−xCaxFe2O4 ferrite powder
440
Prediction of thermal conductivity detection response factors using an artificial neural network
441
Prediction of thermal conductivity of ethylene glycol–water solutions by using artificial neural networks
442
Prediction of thermal conductivity of kernels and a packed bed of brown rice Original Research Article
443
Prediction of thermal conductivity of nanostructures: Influence of phonon dispersion approximation
444
Prediction of thermal conductivity of rock through physico-mechanical properties
445
Prediction of thermal conductivity of steel
446
Prediction of thermal contact conductance based on the statistics of the roughness profile characteristics
447
Prediction of thermal crack spacing
448
Prediction of thermal cross-slip stress in magnesium alloys from a geometric interaction model Original Research Article
449
Prediction of thermal cross-slip stress in magnesium alloys from direct first-principles data Original Research Article
450
Prediction of thermal expansion properties of carbon nanotubes using molecular dynamics simulations
451
Prediction of thermal history of preforms produced by the clean metal spray forming process
452
Prediction of thermal history of preforms produced by the clean metal spray forming process
453
Prediction of thermal load temperature difference values for the external envelope of rooms with setback and setup thermostats
454
Prediction of thermal pressure coefficient by the law of corresponding state and group contribution
455
Prediction of thermal stability, crystallinity and thermomechanical properties of poly(ethylene oxide)/clay nanocomposites with artificial neural networks
456
Prediction of thermal transients in district heating systems
457
Prediction of thermodynamic and transport properties in the one-phase region of methane + n-hexane mixtures near their critical end points
458
Prediction of thermodynamic derivative properties of natural condensate gases at high pressure by Monte Carlo simulation
459
Prediction of thermodynamic properties from pure compound information: Characterization of fullerenes
460
Prediction of thermodynamic properties of heavy hydrocarbons by Monte Carlo simulation
461
Prediction of thermodynamic properties of heavy hydrocarbons by Monte Carlo simulation
462
Prediction of Thermodynamic Properties of Helium and Neon as Working Fluids in Cryogenic Processes using Fundamental Equations of States
463
Prediction of thermodynamic properties of long chain 1-carboxylic acids and esters using a group contribution equation
464
Prediction of thermodynamic properties of natural gas mixtures using 10 equations of state including a new cubic two-constant equation of state
465
Prediction of thermodynamic properties of polymeric liquids using a new equation of state
466
Prediction of thermodynamic properties of pure ionic liquids through extended SAFT-BACK equation of state
467
Prediction of thermodynamic properties of refrigerants using data mining
468
Prediction of thermodynamic properties of sodium dodecyl sulfate aqueous solutions through the hetero-SAFT equation of state
469
Prediction of thermodynamic properties of solute elements in Si solutions using first-principles calculations Original Research Article
470
Prediction of thermodynamic properties of some hydrofluoroether refrigerants using a new equation of state
471
Prediction of thermodynamic properties of the C–Fe–Co–Ni solid solutions by binary infinite dilute activity coefficients
472
Prediction of thermodynamic properties of the C–Fe–Co–Ni solid solutions by binary infinite dilute activity coefficients
473
Prediction of thermodynamic properties of the C–Fe–Co–Ni solid solutions by binary infinite dilute activity coefficients
474
Prediction of thermodynamic properties using a modified UNIFAC model: application to sugar industrial systems
475
Prediction of thermodynamic, transport and vapor–liquid equilibrium properties of binary mixtures of ethylene glycol and water
476
Prediction of thermo-mechanical behavior during hot upsetting using neural networks
477
Prediction of thermo-mechanical fatigue for solder joints in power electronics modules under passive temperature cycling
478
Prediction of thermophysical properties of mixed refrigerants using artificial neural network
479
Prediction of thin shoal-facies reservoirs in the carbonate platform interior: A case from the Cambrian Xixiangchi Group of the Weiyuan area, Sichuan Basin
480
Prediction of Thin-ideal Internalization from Appearance Perfectionism, Self-concept Clarity and Self-esteem
481
Prediction of thoracic and lumbar vertebral body compressive strength: correlations with bone mineral density and vertebral region
482
Prediction of three-body B0→ρ−pn̄, π−pn̄
483
Prediction of three-dimensional fractal dimensions using the two-dimensional properties of fractal aggregates
484
Prediction of three-dimensional molecular structures using information from infrared spectra Original Research Article
485
Prediction of three-dimensional residual stresses in the multilayer coating-based systems with cylindrical geometry
486
Prediction of three-phase oil relative permeability through a sigmoid-based model
487
Prediction of threshold impact energy for onset of delamination in quasi-isotropic carbon/epoxy composite laminates under low-velocity impact
488
Prediction of threshold stress intensity factor for hydrogen induced intergranular cracking of tubular steel
489
Prediction of threshold stress intensity factor for hydrogen induced intergranular cracking of tubular steel
490
Prediction of threshold value for FGA formation
491
Prediction of thrombus-related mechanical prosthetic valve dysfunction using transesophageal echocardiography
492
Prediction of Tiltrotor Height-Velocity Diagrams Using Optimal Control Theory
493
Prediction of time dependent chloride transport in concrete structures exposed to a marine environment
494
Prediction of Time Dependent Stationary Creep Behavior of Fibrous Composites
495
Prediction of Time of Capillary Rise in Porous Media Using Artificial Neural Network (ANN)
496
Prediction of time required for onset of convection in a porous medium saturated with oil and a layer of gas underlying the oil
497
Prediction of time series by a structural learning of neural networks
498
Prediction of Time Series Using RBF Neural Networks: A New Approach of Clustering
499
Prediction of Time to Failure in Creep Type Large-Scale Landslide
500
Prediction of time to growth of Listeria monocytogenes using Monte Carlo simulation or regression analysis, influenced by sublethal heat and recovery conditions Original Research Article
501
Prediction of time to reflux using accelerated failure time model of Weibull distribution in children with antenatal hydronephrosis
502
Prediction of time-dependent effects in concrete structures using early measurement data
503
Prediction of time-dependent structural behaviour with recurrent neural networks for fuzzy data
504
Prediction of time-evolving sand ripples in shelf seas
505
Prediction of Times to Failure of Censored Units in Hybrid Censored Samples from Exponential Distribution
506
Prediction of Times to Failure of Censored Units in Progressive Hybrid Censored Samples for the Proportional Hazards Family
507
PREDICTION OF TIP RESISTANCE FROM PILE DYNAMICS
508
PREDICTION OF TIRE TRACTIVE PERFORMANCE BY USING ARTIFICIAL NEURAL NETWORKS
509
Prediction of tissue decompression in orbital surgery
510
Prediction of Tool Force in Two Point Incremental Forming by Slab Analysis
511
Prediction of Tool Life in End Milling of Ti-6Al-4V Alloy Using Artificial Neural Network and Multiple Regression Models
512
Prediction of tool wear in micro USM
513
Prediction of top-oil temperature for transformers using neural networks
514
Prediction of topological insulating behavior in inverse Heusler compounds from first principles
515
Prediction of torque and specific fuel consumption of a gasoline engine by using artificial neural networks
516
PREDICTION OF TORSIONAL DAMPING COEFFICIENTS IN RECIPROCATING ENGINE
517
Prediction of total and hip fracture risk in men and women by quantitative ultrasound of the calcaneus: EPIC-Norfolk prospective population study
518
Prediction of total antioxidant capacity of red wine by Fourier transform infrared spectroscopy
519
Prediction of total cerebral tissue volumes in normal appearing brain from sub-sampled segmentation volumes
520
Prediction of total green tea antioxidant capacity from chromatograms by multivariate modeling
521
Prediction of total manufacturing costs for stamping tool on the basis of CAD-model of finished product
522
Prediction of total oxides of nitrogen and nitrogen dioxide concentrations in a large urban area using a new generation urban scale dispersion model with integral chemistry model
523
Prediction of Total Soluble Solids and Firmness of Carrot Based on Carrot Water Content
524
Prediction of total viable counts on chilled pork using an electronic nose combined with support vector machine
525
Prediction of Tourism Demand in Iran by Using Artificial Neural Network (ANN) and Supporting Vector Machine (SVR)
526
Prediction of toxicity of aliphatic carboxylic acids using adaptive neuro-fuzzy inference system
527
Prediction of trace compounds in biogas from anaerobic digestion using the MATLAB Neural Network Toolbox
528
Prediction of Trace Element Mobility in Contaminated Soils by Sequential Extraction
529
Prediction of trace element volatility during co-combustion processes
530
Prediction of tractive response for flexible wheels with application to planetary rovers
531
Prediction of tractor repair and maintenance costs using Artificial Neural Network
532
Prediction of trafficability for tracked vehicle on broken soil: real size tests
533
Prediction of traffic-related nitrogen oxides concentrations using Structural Time-Series models
534
Prediction of transcription terminators in bacterial genomes
535
Prediction of transformation texture under complex rolling condition
536
Prediction of transient behaviour of heavy water and helium gas in reactivity mechanism thimbles during an in-core break in candu reactor
537
Prediction of transient contaminant dispersion and ventilation performance using the concept of accessibility
538
Prediction of transient heat and mass transfer in a closed metal–hydrogen reactor
539
Prediction of transient pressure response in the petroleum reservoirs using orthogonal collocation
540
Prediction of transient response for a 25-cm2 PEM fuel cell
541
Prediction of transient responses of a folding wing during the morphing process
542
Prediction of transient turbulent dispersion by CFD–statistical hybrid modeling method
543
Prediction of transmembrane helix configurations by replica-exchange simulations
544
Prediction of transmembrane pressure build-up in constant flux microfiltration of compressible materials in the absence and presence of shear
545
Prediction of transmitted gamma-ray spectra measured with NaI(Tl) detector using neural network
546
Prediction of transport properties of pure noble gases and some of their binary mixtures by ab initio calculations
547
Prediction of transport properties of wood below the fiber saturation point – A multiscale homogenization approach and its experimental validation. Part II: Steady state moisture diffusion coefficient
548
Prediction of transport properties of wood below the fiber saturation point – A multiscale homogenization approach and its experimental validation: Part I: Thermal conductivity
549
Prediction of transverse and angular distortions of gas tungsten arc bead-on-plate welding using artificial neural network
550
Prediction of traumatic wound infection with a neural network-derived decision model
551
Prediction of traveling front behavior in a lattice-gas cellular automaton model for tumor invasion
552
Prediction of tread block forces for a free-rolling tyre in contact with a rough road
553
Prediction of tread block forces for a free-rolling tyre in contact with a smooth road
554
Prediction of treatment outcome among patients with irritable bowel syndrome treated with group cognitive therapy
555
Prediction of treatment outcome in social phobia: a cross-validation
556
Prediction of treatment response in major depression: Integration of concepts
557
Prediction of tree biomass in the forest–tundra ecotone using airborne laser scanning
558
Prediction of TRISO coated particle performances for a one-pass deep burn
559
Prediction of troponin-T degradation using color image texture features in 10 d aged beef longissimus steaks
560
Prediction of tropospheric ozone concentrations: Application of a methodology based on the Darwin’s Theory of Evolution
561
Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine
562
Prediction of true critical temperature of multi-component mixtures: An extension to Chueh and Prausnitz method
563
Prediction of true critical volume of multi-component mixtures: Extending fast estimation methods
564
Prediction of Tumor Existence in the Virtual Soft Tissue by Using Tactile Tumor Detector
565
Prediction of tunnel deformation in squeezing grounds
566
Prediction of tunnel lining loads using correction factors
567
Prediction of turbine blade heat transfer and aerodynamics using a new unsteady boundary layer transition model
568
Prediction of turbulent channel flow with superhydrophobic walls consisting of micro-ribs and cavities oriented parallel to the flow direction
569
Prediction of turbulent convective heat transfer to a fluid at supercritical pressure in square and triangular channels
570
Prediction of turbulent forced convection of a nanofluid in a tube with uniform heat flux using a two phase approach
571
Prediction of turbulent heat transfer in concentric annuli with outer rough wall
572
Prediction of turbulent heat transfer with surface blowing using a non-linear algebraic heat flux model
573
Prediction of turbulent mixing rates of both gas and liquid phases between adjacent subchannels in a two-phase slug-churn flow
574
Prediction of turbulent mixing rates of both gas and liquid phases between adjacent subchannels in a two-phase slug-churn flow Original Research Article
575
Prediction of turbulent particle-laden flow in horizontal smooth and rough pipes inducing secondary flow
576
Prediction of TVB-N content in eggs based on electronic nose
577
Prediction of twodimensional gas chromatography timeofflight mass spectrometry retention times of 160 pesticides and 25 environmental organic pollutants in grape by multivariate chemometrics methods
578
Prediction of two-dimensional materials with half-metallic Dirac cones: Ni2C18H12 and Co2C18H12
579
Prediction of two-phase capillary pressure–saturation relationships in fractional wettability systems
580
Prediction of two-phase condensation in horizontal tubes using probabilistic flow regime maps
581
Prediction of two-phase heat transfer in a 4-pass evaporator bundle using single tube experimental data
582
Prediction of two-phase mixture density using artificial neural networks
583
Prediction of two-phase pressure drop and void fraction in microchannels using probabilistic flow regime mapping
584
Prediction of two-phase pressure gradients of refrigerants in horizontal tubes
585
Prediction of typhoon wind by Level 2.5 closure model
586
Prediction of Ultimate Capacity of Welded Steel Moment Connections under Extremely Low Cycle Fatigue and Progressive Collapse
587
Prediction of ultimate earthquake resistance of gravity-load designed RC buildings
588
Prediction of ultimate strength of reinforced geopolymer concrete wall panels in one-way action
589
Prediction of ultimate strength of shale using artificial neural network
590
Prediction of ultrafiltration performance during clarification of stevia extract
591
Prediction of ultra-high ON/OFF ratio nanoelectromechanical switching from covalently-bound C60 chains
592
Prediction of ultrasonic velocities in ternary oxide glasses using microstructural properties of the constituents as predictor variables; Artificial Neural Network (ANN) approach
593
Prediction of ultrasonic velocities in ternary oxide glasses using microstructural properties of the constituents as predictor variables; Artificial Neural Network (ANN) approach
594
Prediction of ultrasonic wave velocities in sintered materials based on the ultrasonic properties of green or partially sintered compacts
595
Prediction of ultrasonic wave velocity in particleboard and fiberboard
596
Prediction of ultrasound-mediated disruption of cell membranes using machine learning techniques and statistical analysis of acoustic spectra
597
Prediction of umbilical artery base excess by intrapartum fetal oxygen saturation monitoring, , ,
598
Prediction of unburned carbon and NOx in a tangentially fired power station using single coals and blends
599
Prediction of unburnt carbon in tangentially fired boiler using Indian coals
600
Prediction of uncertain frequency response function bounds using polynomial chaos expansion
601
Prediction of uncertain structural responses using fuzzy time series
602
Prediction of uncertainties in atmospheric properties measured by radio occultation experiments Original Research Article
603
Prediction of unconfined compressive strength of cement paste containing industrial wastes
604
Prediction of unconfined compressive strength of cement paste with pure metal compound additions
605
Prediction of understory vegetation cover with airborne lidar in an interior ponderosa pine forest
606
Prediction of underwater target strength
607
Prediction of underweight, short stature, and microcephaly based on brain diffusion-weighted imaging sequence in neonates with stage.2 of hypoxic-ischemic encephalopathy: A follow-up study
608
Prediction of Undrained Sinkhole Collapse
609
Prediction of ungulates abundance through local linear algorithms
610
Prediction of uniaxial compressive strength of sandstones using petrography-based models
611
PREDICTION OF UNKNOWN BASE HEAT FLUX IN AN ANNULAR FIN BY STRAIN MEASUREMENT
612
Prediction of unknown terms of a sequence and its application to some physical problems
613
Prediction of Unmeasured Mode Shape Using Artificial Neural Network for Damage Detection
614
Prediction of unsaturated soils e ective stress parameter using gene expression programming
615
Prediction of unstable behaviour in a heated channel with water at supercritical pressure by CFD models
616
Prediction of Unsteady Aerodynamic Forces on Maneuvering Delta Wings
617
Prediction of unsteady flow around square and rectangular section cylinders using a discrete vortex method
618
Prediction of unsteady flow around square and rectangular section cylinders using a discrete vortex method
619
Prediction of unusual curled nitrogen oligomers
620
Prediction of unwanted pregnancies using logistic regression, probit regression and discriminant analysis
621
Prediction of uplift capacity of suction caisson in clay using functional network and multivariate adaptive regression spline
622
Prediction of upper extremity impact forces during falls on the outstretched hand
623
Prediction of urinary and blood pH in non-lactating dairy cows fed anionic diets
624
Prediction of User’s Trustworthiness in Web-based Social Networks via Text Mining
625
Prediction of users charging time in cloud environment using machine learning
626
Prediction of users’ future requests using neural network
627
Prediction of vacuum-induced buckling pressures of thin-walled cylinders
628
Prediction of values of variables in linear measurement error model
629
Prediction of van der Waals interaction in bubble–particle attachment in flotation
630
Prediction of vapor liquid equilibria using COSMOtherm
631
Prediction of vapor pressure and heats of vaporization of edible oil/fat compounds by group contribution
632
Prediction of vapor pressure for nonaqueous electrolyte solutions using an electrolyte equation of state
633
Prediction of vapor pressures and enthalpies of vaporization of organic compounds from the normal boiling point temperature
634
Prediction of vapor pressures of pure compounds from knowledge of the normal boiling point temperature
635
Prediction of vapor pressures of solid organic compounds with a group-contribution method
636
Prediction of vapor–liquid and liquid–liquid equilibria for polymer systems: Comparison of activity coefficient models
637
Prediction of vapor-liquid equilibria at high pressures using activity coefficients at infinite dilution
638
Prediction of Vapor-Liquid Equilibria Data from C-H Band Shifts of Raman Spectra and Activity Coefficients at Infinite Dilution in Some Aqueous Systems
639
Prediction of vapor-liquid equilibria for acetic acid aqueous solutions containing salt
640
Prediction of vapor–liquid equilibria for asymmetric systems at low and high pressures with the PSRK model
641
Prediction of vapor–liquid equilibria for supercritical alcohol + fatty acid ester systems by SRK equation of state with Wong–Sandler mixing rule based on COSMO theory
642
Prediction of vapor–liquid equilibria in mixed-solvent electrolyte systems using the group contribution concept
643
Prediction of vapor–liquid equilibria in non-polymer and polymer solutions using an ASOG-based equation of state (PRASOG)
644
Prediction of Vapor-Liquid Equilibria of Alcohol-Hydrocarbon Systems by 1H NMR and Activity Coefficients at Infinite Dilution
645
Prediction of vapor–liquid equilibria of binary systems containing esters by using Wilson equation with parameters estimated from pure-component properties
646
Prediction of vapor-liquid equilibria of binary systems using PRSV equation of state and Wong-Sandier mixing rules
647
Prediction of vapor–liquid equilibria properties of several HFC binary refrigerant mixtures
648
Prediction of Vapor-Liquid Equilibria Using CEOS /GE Models
649
Prediction of vapor–liquid equilibrium data for ternary systems using artificial neural networks
650
Prediction of vapor–liquid equilibrium data of the system MTBE + methanol + ethanol by PRSV2 EOS
651
Prediction of vapor–liquid equilibrium for reservoir mixtures with cubic equations of state: Binary interaction parameters for acidic gases
652
Prediction of vapor–liquid equilibrium for systems containing hydrofluoroethers using ASOG group contribution method
653
Prediction of vapor–liquid equilibrium in polymer solutions using a Peng–Robinson group contribution model
654
Prediction of vapor–liquid equilibrium in water–alcohol–hydrocarbon systems with the dipolar perturbed-chain SAFT equation of state
655
Prediction of vapour–liquid coexistence data of Phenylacetylcarbinol
656
Prediction of vehicle discomfort from transient vibrations
657
Prediction of vehicle reliability performance using artificial neural networks
658
Prediction of vehicle traffic accidents using bayesian networks
659
Prediction of vehicle-induced local responses and application to a skewed girder bridge
660
Prediction of Velocity and Deformation Fields During Multipass Plate Hot Rolling by Novel Mixed Analytical-Numerical Method Original Research Article
661
Prediction of velocity profiles and longitudinal dispersion in salt marsh vegetation
662
Prediction of velocity statistics in three-dimensional multi-Gaussian hydraulic conductivity fields
663
Prediction of Velocity-Dip-Position at the Central Section of Open Channels using Entropy Theory
664
Prediction of venous metastases, recurrence, and prognosis in hepatocellular carcinoma based on a unique immune response signature of the liver microenvironment
665
Prediction of Ventilator-Associated Pneumonia in Patients Undergoing Stress Ulcer Prophylaxis: A Longitudinal Descriptive Study in Iran
666
Prediction of vernalisation in three Australian Vrn responsive wheats
667
Prediction of vertebral failure loads from spinal and femoral dual-energy x-ray absorptiometry, and calcaneal ultrasound: an in situ analysis with intact soft tissues
668
Prediction of vertical deflections for a long-span prestressed concrete bridge structure
669
Prediction of vertical soil organic carbon profiles using soil properties and environmental tracer data at an untilled site
670
Prediction of Vesicoureteral Reflux in Children with First Urinary Tract Infection by Dimercaptosuccinic Acid and Ultrasonography
671
Prediction of viability by pulsed-wave Doppler tissue sampling of asynergic myocardium during low-dose dobutamine challenge
672
Prediction of vibration and instability of rotating damped beams with an elastically restrained root
673
Prediction of vibration and instability of rotating damped beams with an elastically restrained root
674
Prediction of vibration and instability of rotating damped beams with an elastically restrained root
675
Prediction of vibration of rotating damped beams with arbitrary pretwist
676
Prediction of vibration of rotating damped beams with arbitrary pretwist
677
PREDICTION OF VIBRATIONAL ENERGY DISTRIBUTION IN THE THIN PLATE AT HIGH-FREQUENCY BANDS BY USING THE RAY TRACING METHOD
678
Prediction of vibrations induced by underground railway traffic in Beijing
679
PREDICTION OF VIBROACOUSTICS ENERGY USING A DISCRETIZED TRANSIENT LOCAL ENERGY APPROACH AND COMPARISON WITH TSEA
680
Prediction of Victimization Based on Emotional Intelligent with Mediating Role of Loneliness and Empathy: A Structural Equation Modeling Approach
681
Prediction of visceral response to multi-directional loading as measured by the chestband
682
Prediction of viscosities and surface tensions of fuels using a new corresponding states model
683
Prediction of viscosities and vapor–liquid equilibria for five polyhydric alcohols by molecular simulation
684
Prediction of viscosity of glucose and calcium chloride solutions Original Research Article
685
Prediction of viscosity of solutions by cubic EOS, prevent of laboratory wastes to entry into the Agriculture soils
686
Prediction of visual perceptions with artificial neural networks in a visual prosthesis for the blind
687
Prediction of VLE of polymer solutions by the GFD equation of state
688
Prediction of VOCs adsorption equilibria on activated carbon in supercritical carbon dioxide over a wide range of temperature and pressure by using pure component adsorption data: Combined approach of the Dubinin–Astakhov equation and the non-ideal adsorb
689
Prediction of void fraction for PWR and BWR conditions with the sub-channel code F-COBRA-TF
690
Prediction of volumes and risk in hydrocarbon exploration: a quantification of geology
691
Prediction of volumetric and thermodynamic properties of two aromatic–alcohol mixtures using GMA equation of state
692
Prediction of volumetric behavior and glass transition temperature of polymers: a group contribution approach
693
Prediction of volumetric properties of carbon dioxide-expanded organic solvents using the Predictive Soave–Redlich–Kwong (PSRK) equation of state
694
Prediction of volumetric properties of fluids for oil and gas applications
695
Prediction of volumetric properties of polymer melts using new perturbed hard-chain equation of state
696
Prediction of volumetric properties of some fatty acid methyl esters, biodiesel fuels and their blends using perturbed Yukawa hard-core chain equation of state
697
Prediction of vortex-induced oscillations of a bridge girder with span-wise varying geometry
698
Prediction of Vulnerability to Addiction on the Basis of Psychosocial Stressors
699
Prediction of wall shear for horizontal annular air–water flow
700
Prediction of wall-pressure fluctuation in turbulent flows with an immersed boundary method
701
Prediction of wastewater dilution and indicator bacteria concentrations for marine outfall systems
702
Prediction of wastewater treatment plant performance based on wavelet packet decomposition and neural networks
703
Prediction of wastewater treatment plant performance using artificial neural networks
704
Prediction of water activity in vegetable creams: Note 2 Original Research Article
705
Prediction of water activity of glucose and calcium chloride solutions Original Research Article
706
Prediction of water activity of osmotic solutions Original Research Article
707
Prediction of water and oil percolation thresholds of a microemulsion by modeling of dynamic viscosity using response surface methodology
708
Prediction of water and protein contents and quality classification of Spanish cooked ham using NIR hyperspectral imaging Original Research Article
709
Prediction of water breakthrough time for oil wells in low-permeability bottom water reservoirs with barrier
710
Prediction of water content of sour and acid gases
711
Prediction of Water Inrush Through Coal Floors Based on Data Mining Classification Technique
712
Prediction of water loss from pears (Pyrus communis cv. Conference) during controlled atmosphere storage as affected by relative humidity Original Research Article
713
Prediction of water quality in lakes and reservoirs. Part I — Model description
714
Prediction of water quality in lakes and reservoirs. Part I — Model description
715
Prediction of water quality in lakes and reservoirs: Part II - Model calibration, sensitivity analysis and application
716
Prediction of water quality in lakes and reservoirs: Part II - Model calibration, sensitivity analysis and application
717
Prediction of Water Quality Indices by Regression Analysis and Artificial Neural Networks
718
Prediction of water table depth in western region, Orissa using BPNN and RBFN neural networks
719
Prediction of Water Table in an Alluvial Aquifer Using Modflow
720
Prediction of water temperature in a subtropical subalpine lake using an artificial neural network and three-dimensional circulation models
721
Prediction of water temperature in stratified reservoir and effects on downstream irrigation area: A case study of Xiahushan reservoir
722
Prediction of water vapor sorption in the polymeric membranes using PHSC equation of state
723
Prediction of water-holding capacity and composition of porcine meat by comparative spectroscopy
724
Prediction of water–rock interaction and porosity evolution in a granitoid-hosted enhanced geothermal system, using constraints from the 5 km Basel-1 well
725
Prediction of wave ripple characteristics using genetic programming
726
Prediction of wax deposition problems of hydrocarbon production system
727
Prediction of wax disappearance temperature using artificial neural networks
728
Prediction of wax precipitation temperature in petroleum reservoirs upon methane injection
729
Prediction of wear and its effect on the multiphase flow and separation performance of dense medium cyclone
730
Prediction of wear and plastic flow in rails—Test rig results, model calibration and numerical prediction
731
Prediction of wear and surface roughness in electro-discharge diamond grinding
732
Prediction of wear behaviors of nickel free stainless steel–hydroxyapatite bio-composites using artificial neural network
733
Prediction of wear behaviour of A356/SiCp MMCs using neural networks
734
Prediction of wear coefficient of Al6061–TiO2 composites
735
Prediction of Wear Failure in Journalpin Bearings
736
Prediction of wear in hot forging tools by means of finite-element-analysis
737
Prediction of wear properties in A356 matrix composite reinforced with B4C particulates
738
Prediction of wear rates in comminution equipment
739
Prediction of wear-resistant thin diffusive coatings
740
Prediction of weathering paleokarst reservoirs by combining paleokarst landform with unconformity: A case study of Sinian Dengying Formation in Leshan-Longnüsi paleo-uplift, Sichuan Basin
741
Prediction of weight and yield of main lean cuts related to carcass weight in heavy pigs intended for Spanish high quality dry-cured ham
742
Prediction of weld bead geometry and penetration in shielded metal-arc welding using artificial neural networks
743
Prediction of Weld Strength in Power Ultrasonic Spot Welding Process Using Artificial Neural Network (ANN) and Back Propagation Method
744
Prediction of weld toe magnification factors for semi-elliptical cracks in T–butt joints
745
Prediction of welding buckling distortion in a thin wall aluminum T joint
746
Prediction of welding distortion and residual stress in a thin plate butt-welded joint
747
Prediction of welding distortion in a curved plate structure by means of elastic finite element method
748
Prediction of welding distortion in butt joint of thin plates
749
Prediction of welding residual stress in multi-pass butt-welded modified 9Cr–1Mo steel pipe considering phase transformation effects
750
Prediction of welding residual stresses and displacements by simplified models. Experimental validation
751
Prediction of welding-induced angular distortions in thin butt-welded plates using artificial neural networks
752
Prediction of wellbore temperatures in gas production wells
753
Prediction of wettability variation and its impact on flow using pore- to reservoir-scale simulations
754
Prediction of Wheat Production Using Artificial Neural Networks and Investigating Indirect Factors Affecting It: Case Study in Canterbury Province, New Zealand
755
Prediction of wheel profile wear—comparisons with field measurements
756
Prediction of whole-body thermal sensation in the non-steady state based on skin temperature
757
Prediction of wind environment and thermal comfort at pedestrian level in urban area
758
Prediction of wind loads on a large flat roof using fuzzy neural networks
759
Prediction of wind noise radiated from passenger cars and its evaluation based on auralization
760
Prediction of wind noise radiated from passenger cars and its evaluation based on auralization
761
Prediction of wind-induced fatigue on claddings of low buildings
762
Prediction of wind-induced pressures on a large gymnasium roof using artificial neural networks
763
Prediction of windings temperature rise in induction motors supplied with distorted voltage
764
Prediction of wolf (Canis lupus) kill-sites using hidden Markov models
765
Prediction of wolf (Canis lupus) kill-sites using hidden Markov models
766
Prediction of Women’s Marital Intimacy Based on Sexual Satisfaction and Health Literacy among Husbands with Diabetes in Ahvaz, 2021
767
PREDICTION OF WORK ROLL INITIAL CROWN ACCORDING TO DESIRED STRIP PROFILE IN HOT ROLLING
768
Prediction of workers pulmonary disorder exposed to silica dust in stone crushing workshops using logistic regression and artificial neural networks techniques
769
Prediction of work-hardening coefficient and exponential by adaptive inverse finite element method for tubular material
770
Prediction of working motivation through job characteristic: the role of internal motivation, general and growth satisfaction
771
Prediction of workpiece dynamics and its effects on chatter stability in milling
772
Prediction of work-roll failure in the hot ring rolling process
773
Prediction of worn geometry in cone crushers
774
Prediction of wrinkle tendencies in explicit sheet metal-forming simulations
775
Prediction of wrinkling and fracturing in viscous pressure forming (VPF) by using the coupled deformation sectional finite element method
776
Prediction of WSN placement for bridge health monitoring based on material characteristics
777
PREDICTION OF YIELD BY DIGITAL IMAGE ANALYSIS OF VINE
778
Prediction of yield functions on BCC polycrystals
779
Prediction of Young’s modulus of graphene sheets and carbon nanotubes using nanoscale continuum mechanics approach
780
Prediction of Young’s modulus of single wall carbon nanotubes by molecular-mechanics based finite element modelling
781
Prediction of Zamorano cheese quality by near-infrared spectroscopy assessing false non-compliance and false compliance at minimum permitted limits stated by designation of origin regulations
782
Prediction of α-Helices in Proteins with the Hydrophobic Strip-of-Helix Template and Distributions of Other Amino Acids around the Hydrophobic Strip
783
Prediction of α-Helices in Proteins with the Hydrophobic Strip-of-Helix Template and Distributions of Other Amino Acids around the Hydrophobic Strip
784
Prediction of β − Turns Using Global Adaptive Techniques from Multiple Alignments in Neural Network
785
Prediction of β-glucosidase and β-glucosaminidase activities, soil organic C, and amino sugar N in a diverse population of soils using near infrared reflectance spectroscopy
786
Prediction of β-glucosidase and β-glucosaminidase activities, soil organic C, and amino sugar N in a diverse population of soils using near infrared reflectance spectroscopy
787
Prediction of λmax of 1,4-naphthoquinone derivatives using ant colony optimization Original Research Article
788
Prediction of ω phase formation in Ti–Al–X alloys
789
Prediction of ω phase formation in Ti–Al–X alloys
790
Prediction off the left ventricular mass from the electrocardiogram in systemic hypertension
791
Prediction on milling distortion for aero-multi-frame parts
792
Prediction on pipe flow of pumped concrete based on shear-induced particle migration
793
Prediction on thermodynamic properties of ternary molten mattes from Wilson equation
794
Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks
795
Prediction on tribological properties of carbon fiber and TiO2 synergistic reinforced polytetrafluoroethylene composites with artificial neural networks
796
Prediction on tribological properties of short fibre composites using artificial neural networks
797
Prediction on Water-flowing Fractured Region Based on 3D Simulation Technology
798
Prediction on wear properties of polymer composites with artificial neural networks
799
Prediction Operators in Banach Ideal Spaces Original Research Article
800
Prediction or partition coefficients and activity coefficients of two branched compounds using COSMOtherm
801
Prediction performance of PEM fuel cells by gene expression programming
802
Prediction problem for target events based on the inter-event waiting time
803
Prediction properties of Aitkenʹs iterated Δ2 process, of Wynnʹs epsilon algorithm, and of Brezinskiʹs iterated theta algorithm
804
Prediction protein structural classes with pseudo-amino acid composition: Approximate entropy and hydrophobicity pattern
805
Prediction Rule for Atrial Fibrillation After Major Noncardiac Thoracic Surgery
806
Prediction rules for exchangeable sequences related to species sampling
807
Prediction rules to identify patients with methicillin-resistant Staphylococcus aureus and vancomycin-resistant enterococci upon hospital admission
808
Prediction scheme for the catastrophic failure of highly loaded brittle materials or rocks
809
prediction spatial model of domestic liquid waste distribution in sawojajar village, malang city of indonesia
810
Prediction Structures for Multi-view Video Coding
811
Prediction study of elastic properties under pressure effect for filled tetrahedral semiconductors LiZnN, LiZnP and LiZnAs
812
Prediction study of factors affecting speech privacy between rooms and the effect of ventilation openings
813
Prediction study of structural and elastic properties under pressure effect of CdX2O4 (X = Al, Ga, In) spinel oxides
814
Prediction study of the elastic and thermodynamic properties of the newly discovered tetragonal SrPd2Ge2 phase
815
Prediction study of the elastic and thermodynamic properties of the SnMg2O4, SnZn2O4 and SnCd2O4 spinel oxides
816
Prediction study of the structural and elastic properties for the cubic skutterudites LaFe4A12 (A = P, As and Sb) under pressure effect
817
Prediction study of the structural, elastic and electronic properties of ANSr3 (A = As, Sb and Bi)
818
Prediction study of the structural, elastic and high pressure properties of Yttrium chalcogenide
819
Prediction study of the structural, elastic, electronic and optical properties of the antiperovskite
820
Prediction suffix trees for supervised classification of sequences
821
Prediction system of surface damage
822
Prediction tests by using “ISF” method for the geomagnetic disturbances Original Research Article
823
Prediction the Academic Self-efficacy based on Incremental Intelligence Mindset, Motivational Beliefs and Academic Competence
824
Prediction the Charpy impact energy of functionally graded steels
825
Prediction the Groundwater Level of Hamadan-Bahar Plain, West of Iran Using Support Vector Machines
826
Prediction the Return Fluctuations with Artificial Neural Networks’ Approach
827
Prediction the thermodynamics reaction associated with NaK(BH4)2 and detection metastable paths from first principles calculation
828
Prediction Tool for Software Reliability: Enhanced Version of Jelinski – Moranda Model
829
Prediction total specific pore volume of geopolymers produced from waste ashes by ANFIS
830
Prediction under uncertainty in reservoir modeling
831
Prediction Value of CRIB-II in Outcome of Preterm and Low Birth Weight Infants: a Prospective Cohort Study
832
Prediction versus prevention of sudden cardiac death
833
Prediction via estimating functions
834
Prediction with incomplete past and interpolation of missing values
835
Prediction with incomplete past of a stationary process
836
Prediction, analysis and solution of the flow inversion phenomenon in a typical MTR-reactor with upward core cooling
837
Prediction, Assessment and Validation of Protein Interaction Maps in Bacteria
838
Prediction, fine tuning, and temperature extrapolation of a vapor liquid equilibrium using COSMOtherm
839
Prediction, scenarios and insight: The uses of an end-to-end model
840
PREDICTION/ESTIMATION WITH SIMPLE LINEAR MODELS: IS IT REALLY THAT SIMPLE?
841
Prediction-Based Compensation for Gate On/Off Latency during Respiratory-Gated Radiotherapy
842
Prediction-based Decentralized Routing Algorithm
843
Prediction-based diagnosis and loss prevention using qualitative multi-scale models
844
Prediction-based discrete-time adaptive nonlinear stochastic control
845
Prediction-based energy map for wireless sensor networks
846
Prediction-based Iterative Learning Control (PILC) for Uncertain Dynamic Nonlinear Systems Using System Identification Technique
847
Prediction-based lower triangular transform
848
Prediction-based online optimal control of outdoor air of multi-zone VAV air conditioning systems
849
Prediction-Based Portfolio Optimization Model for Iran’s Oil Dependent Stocks Using Data Mining Methods
850
Prediction-based reversible data hiding
851
PredictionofcrackcoalescenceofsteamgeneratortubesinnuclearpowerplantsOriginalResearchArticle
852
Predictionoffloodinggasvelocityingas–liquidcounter-currenttwo-phaseflowininclinedpipesOriginalResearchArticle
853
Predictionofflow-inducedexcitationinapipeconveyingfluidOriginalResearchArticle
854
Predictionoffuelchannel—graphitegas-gapbehaviourinRBMKreactorsOriginalResearchArticle
855
PredictionoflightgasdistributioninexperimentalcontainmentfacilitiesusingtheCFX4codeOriginalResearchArticle
856
Predictionofmoisturemigrationandporepressurebuild-upinconcreteathightemperaturesOriginalResearchArticle
857
PredictionofpossiblewearsitesontheshellwalloffeedwaterheaterduetodropletimpingementusingCFDmodelsOriginalResearchArticle
858
PredictionofradialstressesduetoprestressinginPSCshellsOriginalResearchArticle
859
PredictionofthecriticalheatfluxinannularregimeinvariousverticalchannelsOriginalResearchArticle
860
Predictionoftheobstacleeffectonfilm-boilingheattransferOriginalResearchArticle
861
PredictionoftheperformanceofanionchamberamplifierunderγradiationOriginalResearchArticle
862
PredictionoftranspirationeffectsonheatandmasstransferbydifferentturbulencemodelsReviewArticle
863
Predictions and associations of fatigue syndromes and mood disorders that occur after infectious mononucleosis
864
Predictions and determinants of size-resolved particle infiltration factors in single-family homes in the U.S.
865
Predictions and expected performance for the VUV OK-5/Duke storage ring FEL with variable polarization
866
Predictions and expected performance for the VUV OK-5/Duke storage ring FEL with variable polarization
867
Predictions and experimental studies of the tail pipe noise of an automotive muffler using a one dimensional CFD model
868
Predictions and measurements of residual stresses from forging and heat treatment
869
Predictions and measurements of the stack effect on indoor airborne virus transmission in a high-rise hospital building
870
Predictions and observations of convergence in shallow tunnels: case histories in Greece
871
Predictions and observations of events and configurations occurring during the Uranian equinox
872
Predictions and observations of the flow field induced by laminar flow control microperforations
873
Predictions and observations of the thermal–hydrological conditions in the Single Heater Test
874
Predictions and retrodictions of the hierarchical representation of habitat in heterogeneous environments
875
Predictions and retrodictions of the hierarchical representation of habitat in heterogeneous environments
876
PREDICTIONS AND STRATEGIES FOR INTEGRAL-FIELD SPECTROSCOPY OF HIGH-REDSHIFT GALAXIES
877
Predictions and verifications of early-age stress development in hydrating blended cement concrete
878
Predictions based on the cumulative curves: Basic principles and nontrivial example
879
Predictions for 232U cluster-decays within the macroscopic–microscopic approximation
880
Predictions for a distributed parameter model describing the hepatic processing of 2,3,7,8-TCDD
881
Predictions for all processes e+e− → fermions + γ Original Research Article
882
Predictions for core-level X-ray photoemission spectra of divalent and trivalent 3d transition-metal compounds
883
Predictions for Cosmological Infrared Surveys from Space with the Multiband Imaging Photometer for SIRTF
884
Predictions for decays of radially excited baryons
885
Predictions for dijet production in DIS using small x dynamics
886
Predictions for eclipses of Nereid by Neptune
887
Predictions for isomer distributions of toxic dioxins and furans in selected industrial combustion processes
888
Predictions for molecular hydrogen adsorption in microporous carbons via molecular dynamics simulations and a suggestion for a hydrogen storage medium
889
Predictions for particle deposition from LES of ribbed channel flow
890
Predictions for the Counts of Faint, High-Redshift Galaxies in the Mid-Infrared
891
Predictions for the Impact of a Granular Solid Having Spatially Non-uniform Bulk Porosity
892
Predictions for the low-x structure function in the modified GLR equation Original Research Article
893
Predictions from a U(2) flavour symmetry in supersymmetric theories
894
Predictions from conformal algebra for the deeply virtual Compton scattering
895
Predictions from the Fritzsch-type lepton mass matrices
896
Predictions from the statistical parton distributions for various QCD processes Original Research Article
897
Predictions from Time Series Analysis of the Oscillations in Parish Register Series
898
Predictions from type II see-saw mechanism in image Original Research Article
899
Predictions in 1P1 channel of charmonium by means of QCD sum rules
900
Predictions of a critical fuel thickness for flame extinction in a quiescent microgravity environment
901
Predictions of a stochastic model of bone marrow cell survival in high dose rate radiation fields with arbitrary neutron to gamma-ray absorbed dose rate ratios
902
Predictions of absorption bands for RbCs on helium clusters
903
Predictions of acidity, soluble solids and firmness of pear using electronic nose technique Original Research Article
904
Predictions of adsorption behaviour of the superheavy element 112 Original Research Article
905
Predictions of alpha decay half lives of heavy and superheavy elements Original Research Article
906
Predictions of aneurysm formation in distensible tubes: Part A—Theoretical background to alternative approaches
907
Predictions of aneurysm formation in distensible tubes: Part A—Theoretical background to alternative approaches
908
Predictions of aneurysm formation in distensible tubes: Part B—Application and comparison of alternative approaches
909
Predictions of aneurysm formation in distensible tubes: Part B—Application and comparison of alternative approaches
910
Predictions of bifurcation and instabilities during dynamic extension
911
Predictions of binary sorption isotherms for the sorption of heavy metals by pine bark using single isotherm data
912
Predictions of bone remodeling around dental implant systems
913
Predictions of bridge scour: Application of a feed-forward neural network with an adaptive activation function
914
Predictions of bridge scour: Application of a feed-forward neural network with an adaptive activation function
915
Predictions of buoyancy-induced flow in various across-shape concave enclosures
916
Predictions of cam follower wear in diesel engines
917
Predictions of climate change
918
Predictions of coal combustion and desulfurization in a CFB riser reactor by kinetic theory of granular mixture with unequal granular temperature
919
Predictions of co-contraction depend critically on degrees-of-freedom in the musculoskeletal model
920
Predictions of comprehensive two-dimensional gas chromatography separations from isothermal data
921
Predictions of coronary artery stenosis by artificial neural network
922
Predictions of crack propagation using a variational multiscale approach and its application to fracture in laminated fiber reinforced composites
923
Predictions of cracking mode and hardening behavior of MMC via FEM
924
Predictions of cracking mode and hardening behavior of MMC via FEM
925
Predictions of cracking mode and hardening behavior of MMC via FEM
926
Predictions of critical transitions with non-stationary reduced order models
927
PREDICTIONS OF CRUSTAL DEFORMATION CAUSED BY CHANGING POLAR ICE ON A VISCOELASTIC EARTH
928
Predictions of deflection and first-ply failure load of thin laminated composite plates via the finite element approach
929
Predictions of design parameters in civil engineering problems using SLNN with a single hidden RBF neuron
930
Predictions of effective physical properties of complex multiphase materials
931
Predictions of enteric methane emissions for various summer pasture and winter feeding strategies for cow calf production
932
Predictions of factors affecting extinction efficiencies of internally mixed aerosols using the Reist-Wilson-Mars program
933
Predictions of fatigue crack growth in aluminium alloy 2024–T351 using constraint factors
934
Predictions of flow and heat transfer in multiple impinging jets with an elliptic-blending second-moment closure
935
Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model
936
Predictions of forming limit diagrams using crystal plasticity models
937
Predictions of forming limit diagrams using crystal plasticity models
938
Predictions of fracture
939
Predictions of free jet fires from high pressure, sonic releases
940
Predictions of frost growth on a cold plate in atmospheric air
941
Predictions of Fundamental Frequency Changes During Phonation Based on a Biomechanical Model of the Vocal Fold Lamina Propria
942
Predictions of gas hydrate phase equilibria and amounts in natural sediment porous media
943
Predictions of gas/particle flow with an Eulerian model including a realistic particle size distribution
944
Predictions of ground states of LiGa and NaGa
945
Predictions of growth for Listeria monocytogenes and Salmonella during fluctuating temperature
946
Predictions of heat transfer coefficients of supercritical carbon dioxide using the overlapped type of local neural network
947
Predictions of high pressure phase equilibria of CO2-containing mixtures with the NRCOSMO model
948
Predictions of hydrate formation for systems containing hydrogen
949
Predictions of hydrothermal alteration within near-ridge oceanic crust from coordinated geochemical and fluid flow models
950
Predictions of in situ solid/liquid distribution of radiocaesium in soils
951
Predictions of inter-granular cracking and dimensional changes of irradiated polycrystalline graphite under plane strain
952
Predictions of internal temperature distribution of PEMFC by non-destructive inverse method
953
Predictions of in-tube cooling pressure drops for CO2 mixed with lubricating oil at supercritical pressures
954
Predictions of invasion success of Gonatocerus triguttatus (Hymenoptera: Mymaridae), an egg parasitoid of Homalodisca vitripennis (Hemiptera: Cicadellidae), in California using life table statistics and degree–day values
955
predictions of laryngeal cancer using neural network in kerman shafa hospital
956
Predictions of MESSENGER Neutron Spectrometer measurements for Mercuryʹs north polar region
957
Predictions of mixed mode interface crack growth using a cohesive zone model for ductile fracture
958
Predictions of moisture removal rate and dehumidification effectiveness for structured liquid desiccant air dehumidifier
959
Predictions of nitrate diffusion in sediment using horizontal attenuated total reflection (HATR) by Fourier transform infrared (FTIR) spectrometry
960
Predictions of nitrogen isotropic hyperfine coupling constants in the nitroxide radicals with the aid of DF/HF calculations
961
Predictions of nonlinear viscoelastic behavior using a hybrid approach
962
Predictions of non-steady asymptotic crack tip fields in power law creeping materials Original Research Article
963
Predictions of novel nanostructures of silicon by metal encapsulation
964
Predictions of phase temperatures in a porous cathode of polymer electrolyte fuel cells using a two-equation model
965
Predictions of plume dispersion in complex terrain: Eulerian versus Lagrangian models
966
Predictions of polarization observables in by eight- and ten-resonance U&A models
967
Predictions of polarization observables in by eight- and ten-resonance U&A models
968
Predictions of post-traumatic growth according to spirituality, social support and positive affection in deferent age groups with breast cancer
969
Predictions of Protein-Protein Interfaces within Membrane Protein Complexes
970
Predictions of quasi-periodic and chaotic motions in nonlinear Hamiltonian systems
971
Predictions of realised fecundity and spawning time in Norwegian spring-spawning herring (Clupea harengus)
972
Predictions of Relationships between Catalytic and Solid Phase Properties by Kinetic Models and Their Validation
973
Predictions of roll force under heavy-reduction hot rolling using a large-deformation Tconstitutive model
974
Predictions of selectivity and flux for CH4/H2 separations using single walled carbon nanotubes as membranes
975
Predictions of size-resolved aerosol concentrations of ammonium, chloride and nitrate at a bayside site using EQUISOLV II
976
Predictions of soil surface and topsoil organic carbon content through the use of laboratory and field spectroscopy in the Albany Thicket Biome of Eastern Cape Province of South Africa Original Research Article
977
Predictions of some spontaneous fission decay modes
978
Predictions of soot and thermal radiation properties in confined turbulent jet diffusion flames
979
Predictions of s-process Lead in low-metallicity stars compared with spectroscopic observations Original Research Article
980
Predictions of stability and control for a flying wing
981
Predictions of strength in MEMS components with defects––a novel experimental–theoretical approach
982
Predictions of strengths of long-term variations in sunspot activity
983
Predictions of summer diapause in the redlegged earth mite, Halotydeus destructor (Acari: Penthaleidae), in Australia
984
Predictions of Taylorʹs power law, density dependence and pink noise from a neutrally modeled time series
985
Predictions of temperature distributions on layered metal plates using artificial neural networks
986
Predictions of the adsorption equilibrium of CO2/O2 mixture on multi-walled carbon nanotube using Ideal Adsorbed Solution Theory
987
Predictions of the Al-rich region of the Al–Co–Ni–Y system based upon first-principles and experimental data
988
Predictions of the Al-rich region of the Al–Co–Ni–Y system based upon first-principles and experimental data
989
Predictions of the complex cyclic behavior of polycrystals using a self-consistent modeling
990
Predictions of the Dynamics of a Polygenic Character Under Directional Selection
991
Predictions of the electrical conductivity and charging of the aerosols in Titanʹs atmosphere
992
Predictions of the electronic absorption and emission spectra of luciferin and oxyluciferins including solvation effects
993
Predictions of the impurities in the CO2 stream of an oxy-coal combustion plant
994
Predictions of the Joule-Thomson Inversion Curve for Water and Methanol from the LJ-SAFT EOS
995
Predictions of the Joule–Thomson inversion curves for polar and non-polar fluids from the SAFT-CP equation of state Original Research Article
996
Predictions of the minimum relative depth of die cavity and the minimum amount of preforming in the radial extrusion of tubular components
997
Predictions of the most minimal see-saw model
998
Predictions of the optimum ternary alkali-carbonate electrolyte composition for MCFC by computational calculation
999
Predictions of the residue cross-sections for the elements Z = 113 and Z = 114
1000
Predictions of the solubility of acid gases in monoethanolamine (MEA) and methyldiethanolamine (MDEA) solutions using the electrolyte-UNIQUAC model
