ليست عنوان مقالات لاتين Influence of boundary plantation of poplar (Populus deltoides M.) on soil–water use and water use efficiency of wheat Influence of concentrative and dilutive internal concentration polarization on flux behavior in forward osmosis

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of boundary plantation of poplar (Populus deltoides M.) on soil–water use and water use efficiency of wheat

2

Influence of Boundary Scavenging and Sediment Focusing on234Th,228Th and210Pb Fluxes in the Santa Barbara Basin

3

Influence of boundary stress singularities on the vibration of clamped and simply-supported sectorial plates with arbitrary radial edge conditions

4

Influence of bounded geometry on the initial growth of electrocapillary instability for a liquid metal under electric field

5

Influence of bovine serum albumin on the antibacterial activity of endodontic irrigants against Enterococcus faecalis

6

Influence of Bradyrhizobium japonicum and phosphate solubilizing bacteria on soybean yield at different levels of nitrogen and phosphorus

7

Influence of Bragg gratings phase mismatch in a Mach-Zehnder-based add-drop multiplexer

8

Influence of branch content on the microstructure of blends of linear and octene-branched polyethylene: a MD simulation study

9

Influence of branching characteristics on thermal and mechanical properties of Ziegler-Natta and metallocene hexene linear low-density polyethylene blends with low-density polyethylene

10

Influence of Brand and Perceived Quality on Customer Behavior in the Covid- 19 Pandemic: Ethical Marketing Mix

11

Influence of Brand Loyalty on Consumer Sportswear

12

Influence of brazing parameters and alloy composition on interface morphology of brazed diamond

13

Influence of breakfast composition on childrenʹs attention and memory

14

Influence of breakfast on cognitive performance, appetite and mood in healthy young adults

15

Influence of breast cancer margin assessment method on the rates of positive margins and residual carcinoma

16

Influence of breathing pattern and lung inflation on impulse oscillometry measurements in horses

17

Influence of breathing therapy on complaints, anxiety and breathing pattern in patients with hyperventilation syndrome and anxiety disorders

18

Influence of breed and ageing time on the sensory meat quality and consumer acceptability in intensively reared beef

19

Influence of breed, parity, and stage of lactation on lactational performance and relationship between body fatness and live weight

20

Influence of Bretschneiderʹs Cardioplegia on Norepinephrine Release from Isolated Perfused Guinea-pig Hearts

21

Influence of brick air scrubber by-product on growth and development of corn and hybrid poplar

22

Influence of brick pattern interface structure on mechanical properties of continuous carbon fiber reinforced lithium aluminosilicate glass–ceramics matrix composites

23

Influence of brine composition and fines migration on crude oil/brine/rock interactions and oil recovery

24

Influence of brine concentration on Atlantic salmon fillet salting Original Research Article

25

Influence of brine concentration on swelling pressure of pork meat throughout salting

26

Influence of brine salting prior to pickle salting in the manufacturing of various salted-dried fish species Original Research Article

27

Influence of brisk walking on bone quality of healthy elderly women

28

Influence of brittle shear damage on accuracy of the two-step method in prediction of structural response to blast loads

29

Influence of broken ice on the propagation of surface waves over a bottom shelf

30

Influence of bromide ions on the synthesis of anomeric thiocyanates

31

Influence of bromide on electrochemistry of photosynthetic reaction center films on gold electrodes

32

Influence of bromoethyl group on biological activity of 5-fluorouracil prodrug: Insights from X-ray crystallography and molecular docking

33

Influence of broodstock age on sperm quality traits in Rutilus frisii and its effect on fertilization success

34

Influence of Brown Seaweed (Turbinaria murayana) in Optimizing Performance and Carcass Quality Characteristics in Broiler Chickens

35

Influence of Brugia malayi life stages and BmAFII fraction on experimental Leishmania donovani infection in hamsters

36

Influence of bubble plumes on evaporation from non-stratified waters

37

Influence of bubble size and flow velocity on AC electrical breakdown characteristics of LN2 Original Research Article

38

Influence of bubble size on the transition from low-Re bubbly flow to slug flow in a vertical pipe

39

Influence of bubbles on grain growth in ice

40

Influence of buffelgrass pasture conversion on the regeneration and reproduction of the columnar cactus, Pachycereus pecten-aboriginum, in northwestern Mexico

41

Influence of buffer composition on the capillary electrophoretic separation of carbon nanoparticles

42

Influence of buffer composition on the distribution of inkjet printed protein molecules and the resulting spot morphology

43

Influence of buffer layer thickness and epilayer’s growth temperature on crystalline quality of InAs0.6P0.4/InP grown by LP-MOCVD

44

Influence of buffer layer thickness on the structure and optical properties of ZnO thin films

45

Influence of buffer layers on the structural properties of molecular beam epitaxy grown GaN layers

46

Influence of buffer layers on the structural properties of molecular beam epitaxy grown GaN layers

47

Influence of buffer on resonance frequency of thermoacoustic engine Original Research Article

48

Influence of buffer type and concentration on the peptide composition of trypsin hydrolysates of β-lactoglobulin

49

Influence of buffer zone concentrations on efficiency in partial filling micellar electrokinetic chromatography

50

Influence of buffering effects of dentifrices and fluoride gels on abrasion on eroded dentine

51

Influence of builderʹs sand on the TME of linseed for poultry

52

Influence of Building Façade Visual Elements on Its Historical Image: Case of Kuala Lumpur City, Malaysia

53

Influence of building insulation on outdoor concentrations of regional air-pollutants

54

Influence of building strategies on the accuracy of parts in selective laser sintering

55

Influence of bulk composition of the intermetallic compound ZnPd on surface composition and methanol steam reforming properties

56

Influence of bulk inversion asymmetry on the Datta–Das transistor

57

Influence of bulk pre-straining on the size effect in nickel compression pillars

58

Influence of bulking agent on sewage sludge composting process

59

Influence of bulking agents on organic matter evolution during sewage sludge composting; consequences on compost organic matter stability and N availability

60

Influence of bulky and halogen substituents on crystal packing of pyrazolo[1,5-a]pyrimidines

61

Influence of bull biostimulation, season and parity on resumption of ovarian activity of zebu (Bos indicus) cattle following parturition

62

Influence of bundle coating on the tensile behavior, bonding, cracking and fluid transport of fabric cement-based composites

63

Influence of buoyancy on heat transfer to water flowing in horizontal tubes under supercritical pressure

64

Influence of Burden Distribution on Temperature Distribution in COREX Melter Gasifier Original Research Article

65

Influence of Burner Head Design on Its Thermal and Environmental Characteristics

66

Influence of burner-port geometry in hydrocarbon oxidation and NOx formation mechanisms in methane/air flames

67

Influence of burnout process on pore structure and burnout microstructure in BaTiO3-based Y5V materials

68

Influence of burrow acoustics on sound reception by frogsEupsophus (Leptodactylidae)

69

Influence of butanol addition to diesel–biodiesel blend on engine performance and particulate emissions of a stationary diesel engine

70

Influence of butanol–diesel blends on particulate emissions of a non-road diesel engine

71

Influence of bypass grafting to the infarct artery on late potentials in coronary operations

72

Influence of C doping on the fracture mode and abrasive wear of Al2O3

73

Influence of C incorporation on the initial growth of epitaxial NiSi2 on Si(1 0 0)

74

Influence of C:N ratio on the start-up of up-flow anaerobic filter reactors

75

Influence of C3H8O3 in the electrolyte on characteristics and corrosion resistance of the microarc oxidation coatings formed on AZ91D magnesium alloy surface

76

Influence of C4A deficiency on nonresponse to HBsAg vaccination: a new immune response gene

77

Influence of C5-methylation of cytosine on the formation of cyclobutane pyrimidine dimers

78

Influence of Ca additives on the optical and dielectric studies of sol–gel derived PbTiO3 ceramics Original Research Article

79

Influence of Ca and K on the reconstruction of the Fe3O4(0 0 1) surface

80

Influence of Ca and Na ions in backwash water on ultrafiltration fouling control Original Research Article

81

Influence of Ca substitution on microstructure and electrical properties of Ba(Zr,Ti)O3 ceramics

82

Influence of Ca^2+, K^+ and NO3- fertilisation on nutritional quality of pepper

83

Influence of Ca2+ on cholesterol crystallization from supersaturated model biles

84

Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete

85

Influence of CaCl2 on the hydrothermal modification of Mg(OH)2

86

Influence of cadmium on antioxidant capacity and four microelement concentrations in tomato seedlings (Lycopersicon esculentum)

87

Influence of Cadmium on Life-History Characteristics of Folsomia candida (Willem) in an Artificial Soil Substrate

88

INFLUENCE OF CADMIUM ON PLANT GROWTH AND SOME NUTRIENTS CONTENT OF LETTUCE PLANT.

89

Influence of cadmium on the metabolic quotient, L - : D -glutamic acid respiration ratio and enzyme activity : microbial biomass ratio under laboratory conditions

90

Influence of Caecectomy on Digestibility of Amino Acids for Soybean, Canola and Sunflower Meals in Adult Cockerels

91

Influence of cage or pen housing on carcass traits and meat quality of rabbit

92

Influence of calcinated starfish powder on growth, yield, spawn run and primordial germination of king oyster mushroom (Pleurotus eryngii)

93

Influence of calcination ambient and film thickness on the optical and structural properties of sol–gel TiO2 thin films

94

Influence of calcination and pretreatment temperature on the activity of Ni–B/SiO2 amorphous catalyst in acrylonitrile hydrogenation Original Research Article

95

Influence of calcination conditions on carrying capacity of CaO-based sorbent in CO2 looping cycles

96

Influence of calcination conditions on phase formation and particle size of indium niobate powders synthesized by the solid-state reaction

97

Influence of calcination on the microstructures and photocatalytic activity of potassium oxalate-doped TiO2 powders Original Research Article

98

Influence of calcination parameters on the TiO2 photocatalytic properties

99

Influence of Calcination Temperature and Operational Parameters on Fe-ZSM-5 Catalyst performance in Sonocatalytic Degradation of Phenol from wastewater

100

Influence of calcination temperature and preparation method of TiO2–ZrO2 on conversion of cyclohexanone oxime to ε-caprolactam over B2O3/TiO2–ZrO2 catalyst Original Research Article

101

Influence of calcination temperature of IrO2/Ti electrodes on oxygen reduction

102

Influence of calcination temperature on Fe/HBEA catalyst for the selective catalytic reduction of NOx with NH3

103

Influence of calcination temperature on iron titanate catalyst for the selective catalytic reduction of NOx with NH3

104

Influence of calcination temperature on the activity of mesoporous CaO/TiO2–ZrO2 catalyst in the esterification reaction

105

Influence of calcination temperature on the piezoelectric properties of Ag2O doped 0.94(K0.5Na0.5)NbO3–0.06LiNbO3 ceramics

106

Influence of calcination temperature on the structure and catalytic performance of Au/iron oxide catalysts for water–gas shift reaction Original Research Article

107

Influence of calcination temperature on the structure and catalytic performance of CuOx-CoOy-CeO2 ternary mixed oxide for CO oxidation Original Research Article

108

Influence of calcination temperatures of Feitknecht compound precursor on the structure of Ni–Al2O3 catalyst and the corresponding catalytic activity in methane decomposition to hydrogen and carbon nanofibers Original Research Article

109

Influence of calcined kaolin on mortar properties

110

Influence of calcining temperature on photoluminescence and thermal quenching in europium-doped Y2SiO5 using the MOD process

111

Influence of calcining temperature on photoresponse of TiO2 film under nitrogen and oxygen in room temperature

112

Influence of calcining temperature on the mesopore structures and surface fractal dimensions of MgO-Al2O3-SiO2 xerogels

113

Influence of calcite on the microstructure and mechanical properties of pottery ceramics obtained from a kaolinite-rich clay from Burkina Faso

114

Influence of calcium (0.6 or 1.2%) and phosphorus (0.3 or 0.6%) content and ratio on the formation of urolithogenic compounds in the urine of Boer-cross goats fed high-concentrate diets

115

Influence of calcium and magnesium content of coconut oil on deposit and performance of plant oil pressure stoves

116

Influence of calcium carbonate on the decomposition of asbestos contained in end-of-life products

117

Influence of calcium channel blocker drugs in neuromuscular transmission

118

INFLUENCE OF CALCIUM CHLORIDE (CaCl2) ON FRUIT QUALITY OF PEAR (Pyrus communis) CV. LE CONTE DURING STORAGE

119

Influence of calcium chloride addition on the properties of emulsions stabilized by whey protein concentrate

120

Influence of calcium chloride on the thermal behavior of heavy and alkali metals in sewage sludge incineration

121

Influence of calcium content in Ni/CaO/γ-Al2O3 catalysts for CO2-reforming of methane

122

Influence of calcium hydroxide as an intracanal medicament on apical leakage following obturation using three different sealers

123

Influence of calcium hydroxide residues after using different irrigants on the accuracy of two electronic apex locators: An in vitro study

124

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications

125

Influence of calcium nitrite inhibitor and crack width on corrosion of steel in high performance concrete subjected to a simulated marine environment

126

Influence of Calcium on Arachidonic Acid Mobilization by Murine Resident Peritoneal Macrophages

127

Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer

128

Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer

129

Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer

130

Influence of calcium on lipid mixing mediated by influenza hemagglutinin

131

Influence of Calcium on NADH and Succinate Oxidation by Rat Heart Submitochondrial Particles

132

Influence of calcium on pectin methylesterase behaviour in the presence of medium methylated pectins

133

Influence of calcium on tensile, optical and water vapour permeability properties of sodium caseinate edible films Original Research Article

134

Influence of calcium oxide level and time of exposure to sugarcane on in vitro and in situ digestive kinetics

135

Influence of Calcium Phosphate and Apatite Containing Products on Enamel Erosion

136

Influence of calcium phosphate crystal assemblies on the proliferation and osteogenic gene expression of rat bone marrow stromal cells

137

Influence of calcium propionate, water activity and storage time on mold incidence and aflatoxins production in broiler starter feed

138

Influence of Calcium Sources and Concentrations on the Quality and Storage Performance of Peach

139

Influence of calcium substitution on structural and electrical properties of substituted barium titanate

140

Influence of calcium, magnesium, sodium, potassium and pH on copper toxicity to barley (Hordeum vulgare)

141

Influence of calendering on the properties of paper-derived alumina ceramics

142

Influence of Camembert consumption on the composition and metabolism of intestinal microbiota: a study in human microbiota-associated rats

143

Influence of Camera’s Optical Axis Non-perpendicularity on Measurement Accuracy of Two-dimensional Digital Image Correlation

144

Influence of camped under associated with upright pastern in front conformation in the forelimb movement of horses

145

Influence of Campylobacter jejuni fliA, rpoN and flgK genes on colonization of the chicken gut

146

Influence of Candida pulcherrima Patagonian strain on alcoholic fermentation behaviour and wine aroma

147

Influence of candidates’ popularity, national sentiment and development in the by-election of P185 Batu Sapi, Sabah

148

Influence of canning process on colour, weight and grade of mushrooms

149

Influence of cannonball tree (Couroupita guianensis Aubl.) leaf extract and electrolyzed oxidizing water on postharvest quality of tomato

150

Influence of Cannulation Point on Infraclavicular Subclavian Vein Catheterization: A Clinical Trial

151

Influence of canola oil on the fatty acid profile in goats milk

152

Influence of canopy structure and direct beam solar irradiance on snowmelt rates in a mixed conifer forest

153

Influence of canopy structure on the understory environment in tall, old-growth, conifer forests

154

Influence of CaO additives on wheat-straw pyrolysis as determined by TG-FTIR analysis

155

Influence of CaO additives on wheat-straw pyrolysis as determined by TG-FTIR analysis

156

Influence of CaO–ZrO2–Al2O3–SiO2 glass-ceramic frits on the technological properties of porcelain stoneware bodies

157

Influence of capacitance effect on alternating-current organic light-emitting diodes

158

Influence of capacitive effects on the dynamic of a CNTFET by Monte Carlo method

159

Influence of capillary forces on water injection into hot rock, saturated with superheated vapour

160

Influence of capillary-pressure models on CO2 solubility trapping

161

Influence of capping conditions on structural properties of CdSe/ZnSe quantum dot structures

162

Influence of capping on strain, composition and shape of SiGe islands

163

Influence of captopril on nitroglycerin-mediated vasodilation and development of nitrate tolerance in arterial and venous circulation

164

Influence of carbamide peroxide on enamel fluoride uptake

165

Influence of carbide and inclusion contents on the fatigue properties of high speed steels and tool steels

166

Influence of carbide coatings on the oxidation behavior of carbon fibers Original Research Article

167

Influence of carbide substrates on tribological properties of chromium and chromium nitride coatings: application to wood machining

168

Influence of carbides and microstructure of CoCrMo alloys on their metallic dissolution resistance

169

Influence of carbohydrate delivery on the immune response during exercise and recovery from exercise

170

Influence of Carbohydrate on Structure, Stability, and Function of Gelatin-Binding Fragments of Fibronectin

171

Influence of carbon addition on neutron-induced void swelling of Fe–15Cr–16Ni–0.25Ti model alloy

172

Influence of carbon aerosol aggregation on its optical properties in the asymptotic model of fractal cluster

173

Influence of carbon amendments on soil denitrifier abundance in soil microcosms

174

Influence of carbon and aluminium additions on the Fe–10% B (wt.) system

175

Influence of carbon and buffer amendment on ammonia volatilization in composting

176

Influence of carbon and chromium content and preform shape on the microstructure of spray formed steel deposits

177

Influence of carbon and chromium content and preform shape on the microstructure of spray formed steel deposits

178

Influence of carbon and nitrogen addition on microstructure and hot deformation behavior of biomedical Co–Cr–Mo alloy

179

Influence of carbon and oxygen on phosphorus and aluminium co-gettering in silicon solar cells

180

Influence of carbon and oxygen on phosphorus and aluminium co-gettering in silicon solar cells

181

Influence of carbon ash on the rheological properties of bentonite dispersions

182

Influence of carbon black amorphous phase content on rubber filled compounds

183

Influence of carbon black amorphous phase content on rubber filled compounds

184

Influence of carbon black and binder on Li-ion batteries

185

Influence of carbon black concentration on piezoresistivity for carbon-black-filled silicone rubber composite Original Research Article

186

Influence of carbon black in engine oil on wear of H-free diamond-like carbon coatings

187

Influence of carbon black on slurry compositions for tape cast porous piezoelectric ceramics

188

Influence of carbon black surface chemistry on the adsorption of model herbicides from aqueous solution

189

Influence of carbon blacks on butadiene rubber/high styrene rubber/natural rubber with nanosilica: Morphology and wear

190

Influence of carbon concentration on chemical behavior of energetic deuterium implanted into carbon-contained boron film

191

Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions

192

Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions

193

Influence of carbon concentration on structural, magnetic and electrical transport properties for antiperovskite compounds AlCxMn3

194

Influence of carbon content and particle dispersion on radiation properties of coal chars

195

Influence of carbon content on physicomechanical characteristics of boron carbide

196

Influence of Carbon Content on Strain Hardening Behaviour of Sintered Plain Carbon Steel Preforms Original Research Article

197

Influence of carbon content on the crystallographic structure of boron carbide films

198

Influence of Carbon Content on the Mechanical Properties of Ultra-high Strength of Coated Steel Wire

199

Influence of carbon content on the microstructure and tribological properties of TiN(C) coatings in water lubrication

200

Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/ε-martensite dual-phase Fe–Mn–C steels Original Research Article

201

Influence of carbon deposits and subsequent silylation of silica gel on sorption efficiency of explosive nitramines

202

INFLUENCE OF CARBON FIBER REINFORCED POLYMERS ON UPGRADING SHEAR BEHAVIOR OF RC COUPLING BEAMS

203

Influence of carbon fibre content on the processing and tribological properties of silicon nitride/carbon fibre composites

204

Influence of carbon material and sputtering angle on stripper foil lifetime

205

Influence of carbon material and sputtering angle on stripper foil lifetime

206

Influence of carbon monoxide in package atmospheres containing oxygen on colour, reducing activity, and oxygen consumption of five bovine muscles

207

Influence of carbon nanofiber properties as electrocatalyst support on the electrochemical performance for PEM fuel cells

208

Influence of carbon nanofibers on electrochemical properties of carbon nanofibers/glass fibers composites

209

Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites Original Research Article

210

Influence of carbon nanotube scaffolds on human cervical carcinoma HeLa cell viability and focal adhesion kinase expression Original Research Article

211

Influence of carbon nanotube suspension on the thermal performance of a miniature thermosyphon

212

Influence of carbon nanotube waviness on the stiffness reduction of CNT/polymer composites

213

Influence of carbon nanotube–polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene

214

Influence of carbon nanotubes addition on carbon–carbon supercapacitor performances in organic electrolyte

215

Influence of carbon nanotubes and polypyrrole on the thermal, mechanical and electroactive shape-memory properties of polyurethane nanocomposites

216

Influence of carbon nanotubes and silicon carbide whiskers on the mechanical loss due to grain boundary sliding in 3-mol% yttria-stabilized tetragonal zirconia polycrystals

217

Influence of carbon nanotubes on the optical properties of plasticized solid polymer electrolytes

218

Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates Original Research Article

219

Influence of carbon nanotubes structure on the mechanical behavior of cement composites

220

Influence of carbon on martensitic phase transformations in NiTi shape memory alloys Original Research Article

221

Influence of carbon on phase stability of tetragonal ZrO2

222

INFLUENCE OF CARBON ON THE AGEING BEHAVIOUR OF TI-13V- 11CR-3AL

223

Influence of carbon on the electron stimulated desorption from titanium silicide surfaces

224

Influence of carbon on the synthesis of AlN powder from combustion synthesis precursors

225

Influence of carbon precursors on thermal plasma assisted synthesis of SiC nanoparticles

226

Influence of carbon shell structure on electrochemical performance of multi-walled carbon nanotube electrodes Original Research Article

227

Influence of carbon source and inoculum type on anaerobic biomass adhesion on polyurethane foam in reactors fed with acid mine drainage

228

Influence of carbon source on the microstructure of Al–Ti–C master alloy and its grain refining efficiency

229

Influence of carbon sources and C/N ratio on EPS production in anaerobic sequencing batch biofilm reactors for wastewater treatment

230

Influence of carbon sources on electrochemical performances of LiFePO4/C composites

231

Influence of carbon sources on growth and GC-MS based metabolite profiling of Arnica montana L. hairy roots

232

Influence of carbon sources on LiFePO4/C composites synthesized by the high-temperature high-energy ball milling method

233

Influence of carbon sputtering power on structure, corrosion resistance, adhesion strength and wear resistance of platinum/ruthenium/nitrogen doped diamond-like carbon thin films

234

Influence of carbon structure of the anode on the production of graphite in single-walled carbon nanotube soot synthesized by arc discharge using a Fe–Ni–S catalyst Original Research Article

235

Influence of carbon structure of the anode on the synthesis of single-walled carbon nanotubes in a carbon arc plasma Original Research Article

236

Influence of carbon structure on performance of electrode material for electric double-layer capacitor Original Research Article

237

Influence of carbon templates and Yb3+ concentration on red and green luminescence of uniform Y2O3:Yb/Er hollow microspheres

238

Influence of carbon, nitrogen and oxygen impurities on the ductility and electronic properties of fcc iridium: First-principles study

239

Influence of carbonaceous additives on hydrogen sorption properties of Mg–RE–Ni “pseudoalloys”

240

Influence of carbonate content and micro fabrics on the failure strength of the sandy facies of the Opalinus Clay from Mont Terri (Underground Rock Laboratory)

241

Influence of carbonate content of marls used in dams: Geotechnical and statistical characterization

242

Influence of carbonate content on the stress–strength behaviour of neogene marls from the betic cordillera (Spain) in cu triaxial tests using a quasilinear elastic (hyperbolic) model

243

Influence of carbonate facies on fault zone architecture

244

Influence of carbonate intercalation in the surface-charging behavior of Zn–Cr layered double hydroxides

245

Influence of carbonate microfabrics on the failure strength of claystones

246

Influence of carbonates on the riverine carbon cycle in an anthropogenically dominated catchment basin: evidence from major elements and stable carbon isotopes in the Lagan River (N. Ireland)

247

Influence of carbonation and carbonation methods on leaching of metals from mortars

248

Influence of carbonation on chloride-induced reinforcement corrosion in simulated concrete pore solutions

249

Influence of carbonation on the load dependent deformation of hydraulic lime mortars

250

Influence of carbon-based nanomaterials on lux-bioreporter Escherichia coli

251

Influence of carbonisation parameters on the transport properties of carbon membranes by statistical analysis

252

Influence of carbonization of hot-pressed carbon nanotube electrodes on removal of NaCl from saltwater solution

253

Influence of carbon–oxygen surface complexes on the surface acidity of tungsten oxide catalysts supported on activated carbons Original Research Article

254

Influence of carbon-to-nitrogen ratio on the mixed-acid fermentation of wastewater sludge and pretreated bagasse

255

Influence of carbon–vacancy interaction on carbon and vacancy diffusivity in tungsten

256

Influence of carboxyl group density on neuron cell attachment and differentiation behavior: Gradient-guided neurite outgrowth

257

Influence of carboxyl group formation on ammonia adsorption of NiO-templated nanoporous carbon surfaces

258

Influence of carboxylate ions containing polymers on calcification: in vitro study

259

Influence of carboxymethyl cellulose and sodium alginate on sweetness intensity of Aspartame

260

Influence of Carburization on Dynamic Impact Behavior of NiTiCu Alloy

261

Influence of carburizing and nitriding on failure of gears – A case study

262

Influence of carcinogen binding by lactic acid-producing bacteria on tissue distribution and in vivo mutagenicity of dietary carcinogens

263

Influence of Cardiac Risk Factors and Medication on Length of Hospitalization in Patients Undergoing Major Vascular Surgery

264

Influence of cardiac tissue anisotropy on re-entrant activation in computational models of ventricular fibrillation

265

Influence of cardiopulmonary bypass perfusion temperature on neurologic and hematologic function after coronary artery bypass grafting

266

Influence of cardiopulmonary reflex on the sympathetic activity during myocardial infarction

267

Influence of Cardiovascular Risk Status on Coronary Flow Reserve in Healthy Young Men

268

Influence of Carisolv on resin adhesion for two different adhesive systems to sound human primary dentin and young permanent dentin

269

Influence of Carisolv™ for resin adhesion to sound human primary dentin and young permanent dentin

270

Influence of Carotenoids and Pulps on the Color Modification of Blood Orange Juice

271

Influence of carrageenan addition on turkey meat sausages properties Original Research Article

272

Influence of carrier and bactericide on sorption coefficients of hydrophobic organic compounds for two lake sediments

273

Influence of carrier and doping gases on the chemical vapor deposition of silicon quantum dots

274

Influence of carrier correlations on the excitonic optical response including disorder and microcavity effects

275

Influence of carrier filling ratio on the performance of moving bed biofilm reactor in treating coking wastewater

276

Influence of carrier gas on the prediction of gas chromatographic retention times based on thermodynamic parameters

277

Influence of carrier gas pressure and flow rate on atomic layer deposition of HfO2 and ZrO2 thin films

278

Influence of carrier particle size, carrier ratio and addition of fine ternary particles on the dry powder inhalation performance of insulin-loaded PLGA microcapsules

279

Influence of carrier solution ionic strength and injected sample load on retention and recovery of natural nanoparticles using Flow Field-Flow Fractionation

280

Influence of carrying a backpack on pelvic tilt, rotation, and obliquity in female college students

281

Influence of carvacrol on growth and toxin production by Bacillus cereus

282

Influence of carvacrol on survival of Botrytis cinerea inoculated in table grapes

283

Influence of carvedilol on hospitalizations in heart failure: incidence, resource utilization and costs

284

Influence of casein-based microencapsulation on freeze-drying and storage of probiotic cells Original Research Article

285

Influence of caspase3 selective inhibitor on proteolysis of chicken skeletal muscle proteins during post mortem aging

286

Influence of cassava starch and carnauba wax on physical properties of cashew tree gum-based films

287

Influence of cassava starch content and sintering temperature on the alumina consolidation technique

288

Influence of Cast Dimension on Rotary Bending High Cycle Fatigue Properties of Single Crystal Superalloy Original Research Article

289

Influence of caste polyethism on longevity of workers in social insect colonies

290

Influence of casting defects on fatigue properties of SiC particulate dispersed aluminum alloy composite castings

291

Influence of casting defects on the fatigue behavior of cast aluminum AS7G06-T6

292

Influence of casting defects on the fatigue limit of nodular cast iron

293

Influence of casting procedures on the corrosion resistance of clinical dental alloys containing palladium

294

Influence of casting surface on creep behaviour of thin-wall Ni-base superalloy Inconel100

295

Influence of casting surfaces on fatigue strength of ductile cast iron

296

Influence of Casting Temperature on Electrochemical Behavior of Al-Zn-In Sacrificial Anodes

297

Influence of catalyst and solvent on the preparation of silica particles with mesoporous shell

298

Influence of catalyst and temperature on gasification performance of pig compost for hydrogen-rich gas production

299

Influence of catalyst layer polybenzimidazole molecular weight on the polybenzimidazole-based proton exchange membrane fuel cell performance

300

Influence of catalyst morphology on the performance of electrolytic silver catalysts for the partial oxidation of methanol to formaldehyde Original Research Article

301

Influence of catalyst on transesterification between poly(lactic acid) and polycarbonate under flow field

302

Influence of catalyst pretreatment on catalytic properties and performances of Ru–Re/SiO2 in glycerol hydrogenolysis to propanediols

303

Influence of catalyst pretreatments on volatile organic compounds oxidation over gold/iron oxide

304

Influence of catalyst type on the curing process and network structure of alkyd coatings

305

Influence of catalyst types on the microwave-induced pyrolysis of sewage sludge

306

Influence of catalyst types on the microwave-induced pyrolysis of sewage sludge

307

Influence of catalysts on the pyrolysis of lignites

308

Influence of catalytic system composition on formation of adamantane containing ketones

309

Influence of cataract urgery on automated perimetry in patient with glaucoma

310

Influence of cataract urgery with implantation of different intraocular lene on canning laer tomography and polarimetry

311

Influence of catch crop on soil properties and yield of spring barley

312

Influence of Catchment Condition and water resource development on waterbird assemblages in the Murray-Darling Basin, Australia

313

Influence of catechin on precipitation of aluminum hydroxide

314

Influence of catheter design on lumen wall temperature distribution in intracoronary thermography

315

Influence of Catheter Type and Tenaculum Use on Intrauterine Insemination Outcome

316

Influence of cathode flow pulsation on performance of proton-exchange membrane fuel cell

317

Influence of cathode gas diffusion media on the performance of the PEMFCs

318

Influence of cathode opening size and wetting properties of diffusion layers on the performance of air-breathing PEMFCs

319

Influence of cathode oxygen transport on the discharging time of passive DMFC

320

Influence of cathode polarization on the chromium deposition near the cathode/electrolyte interface of SOFC

321

Influence of cathode process on the performance of lithium-air batteries

322

Influence of Cathodic Arc Current on ‎Structure, Mechanical and Tribological ‎Properties of TiC/a-C:H Nano-multilayer ‎Coatings

323

Influence of catholyte pH and temperature on hydrogen production from acetate using a two chamber concentric tubular microbial electrolysis cell

324

Influence of CaTiO3 impurity in SHS-TiN powder on the mechanical properties of ZrO2–TiN composites

325

Influence of cation and anion structure of the ionic liquid on extraction processes based on activity coefficients at infinite dilution. A review

326

Influence of cation chemical composition and structure on the double layer capacitance for Bi(1 1 1)|room temperature ionic liquid interface

327

Influence of cation disorder on the magnetic properties of ball-milled ilmenite (FeTiO3)

328

Influence of cation distribution on the optical absorption spectra of Fe3+-bearing spinel s.s. –hercynite crystals: evidence for electron transitions in VIFe2+–VIFe3+ clusters

329

Influence of cation exchange on electrokinetic and rheological properties of the oxidized graphite dispersions

330

Influence of cation on the pyrolysis and oxidation of alginates

331

Influence of cation on the pyrolysis and oxidation of alginates

332

Influence of cation size on ionic glass formation and ionic conductivity

333

Influence of cation substitution on the magnetic properties of the FeCr2S4 ferrimagnet Original Research Article

334

Influence of cation substitution on the phase formation kinetics of Sr0.7Bi2.3Ta2O9 thin films

335

Influence of cation type, ionic strength, and pH on solubilization and mobilization of residual hydrocarbon by a biosurfactant

336

Influence of cationic and anionic additives on the electrical properties of ionophore-based ion-selective membranes

337

Influence of cationic field strength of modifiers on the 1.53 μm spectroscopic properties of Er3+-doped tellurite glasses

338

Influence of cationic flocculant properties on the flocculation of yeast suspensions

339

Influence of cationic gemini and conventional CTAB on the interaction of [Cr(III)-Gly-Tyr]2+ complex with ninhydrin

340

Influence of Cationic ordering on ion transport in NASICONs: Molecular dynamics study

341

Influence of cationic polyelectrolyte coagulant on microfiltration performance for treatment of oxidation pond effluent Original Research Article

342

Influence of cationic vacancies on the ionic conductivity of oxyapatites

343

Influence of cations during Orange-II degradation on boron-doped diamond electrode

344

Influence of cations on active sites of the alkaline earth salts of 12-tungstophosphoric acid: microcalorimetric study

345

Influence of cations on noncovalent interactions between 6-propionyl-2-dimethylaminonaphthalene (PRODAN) and dissolved fulvic and humic acids

346

Influence of cation–π interactions in different folding types of membrane proteins Original Research Article

347

Influence of cation–π interactions in protein–DNA complexes

348

Influence of cattle breed and ageing time on textural meat quality

349

Influence of cattle breed and ageing time on textural meat quality

350

Influence of cattle breed on gene expression and phenotype of Holstein and Jersey embryos

351

Influence of cattle breed on gene expression and phenotype of Holstein and Jersey embryos

352

Influence of cattle grazing on population density and species richness of granivorous birds (Emberizidae) in the arid plain of the Monte, Argentina

353

Influence of cattle grazing on the density of oak seedlings and saplings in a Tabor oak forest in Israel

354

Influence of cattle manure and mycorrhiza fungi on fruit and grain yield of cucurbita pepo L. under water deficit stress

355

Influence Of Cattle Manure And Mycorrhiza Fungi On Vegetative Growth Of Pumpkin Under Water Deficit Conditions

356

Influence of cavitation intensity on X6CrNiTi18-10 stainless steel performance in the incubation period

357

Influence of cavitation on the hydroelastic stability of hydrofoils

358

Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions

359

Influence of cavity boundary conditions on the effective electroelastic moduli of piezoelectric ceramic with cavities

360

Influence of cavity de-tuning in semiconductor microcavity LEDs

361

Influence of cavity dimension and restoration methods on the cusp deflection of premolars in composite restoration

362

Influence of cavity dimension on the stability of eccentrically loaded slender unreinforced masonry hollow walls

363

Influence of cavity dimensions and their derivatives (volume and ‘C’ factor) on shrinkage stress development and microleakage of composite restorations

364

Influence of cavity pressure on hydrodynamic deep drawing of aluminum alloy rectangular box with wide flange

365

Influence of cavity pressure on hydrodynamic deep drawing of aluminum alloy rectangular box with wide flange

366

Influence of Cd(II), Cr(VI) and Fe(III) on early steps of deetiolation process in wheat: fluorescence spectral changes of protochlorophyllide and newly formed chlorophyllide

367

Influence of Cd2+ ions on electrical properties of stearic acid Langmuir–Blodgett films

368

Influence of Cd2+ ions on the structural, electrical, optical and magnetic properties of Co–Zn nanoferrites prepared by sol gel auto combustion method

369

Influence of CdCl2 treatment on structural and optical properties of vacuum evaporated CdTe thin films

370

Influence of CdO and gamma irradiation on the infrared absorption spectra of borosilicate glass

371

Influence of CdO-doping on the photoluminescence properties of ZnO nanofibers: Effective visible light photocatalyst for waste water treatment

372

Influence of CdS growth process on structural and photovoltaic properties of CdTe/CdS solar cells

373

Influence of CdS heat treatment on the microstructure of CdS and the performance of CdS/CdTe solar cells

374

Influence of CdS window layer on 2-μm thick CdS/CdTe thin film solar cells

375

Influence of CdSe quantum dot interlayer on the performance of polymer/TiO2 nanorod arrays hybrid solar cell

376

Influence of CdS-filler on the thermal properties of poly(methyl methacrylate)

377

Influence of CdS-filler on the thermal properties of polystyrene

378

Influence of CDW stacking disorder on metal–insulator transition in 1T-TaS2

379

Influence of Ce addition on impact properties and microstructures of 2519A aluminum alloy

380

Influence of Ce and Al on nodularization of eutectic in austenite–bainite steel

381

Influence of Ce codoping and H2 pre-loading on Er/Yb-doped fiber: Radiation response characterized by Confocal Micro-Luminescence

382

Influence of Ce on Characteristics of Inclusions and Microstructure of Pure Iron Original Research Article

383

Influence of Ce0.35Zr0.55Y0.10 Solid Solution on Peroformance of Pt-Rh Three-Way Catalysts

384

Influence of Ce0.9Gd0.1O2 − δ particles on microstructure and oxygen permeability of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ composite membrane

385

Influence of Ce3+ and Gd3+ co-doping on the structure and upconversion emission in hexagonal Ho3+ doped NaYbF4 phosphors

386

Influence of cell aspect ratio on architecture and compressive strength of titanium foams

387

Influence of cell configuration on measuring interfacial impedances between a solid electrolyte and an electrode

388

Influence of cell construction on the electrochemical reduction of nitrate

389

Influence of Cell Geometry on Division-Plane Positioning

390

Influence of Cell Isolation and Recording Technique on the Voltage Dependence of the Fast Cardiac Sodium Current of the Rat

391

Influence of cell properties on rheological characterization of microalgae suspensions

392

Influence of Cell Shape and Aggregate Formation on the Optical Properties of Flowing Whole Blood

393

Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method

394

Influence of cell size on volume calculation using digital terrain models: A case of coastal dune fields

395

Influence of cell surface hydrophobicity on attachment of Campylobacter to abiotic surfaces Original Research Article

396

Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells

397

Influence of cell wall shape and density on the mechanical behaviour of 2D foam structures

398

Influence of cell wall shape and density on the mechanical behaviour of 2D foam structures Original Research Article

399

Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids

400

Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids

401

Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids

402

Influence of cell-adhesive peptide ligands on poly(ethylene glycol) hydrogel physical, mechanical and transport properties

403

Influence of cell-model boundary conditions on the conductivity and electrophoretic mobility of concentrated suspensions

404

Influence of Cellular Density on Determination of EC50 in Microalgal Growth Inhibition Tests

405

Influence of cellular incorporation of n-3 eicosapentaenoic acid on intracellular Ca2+ concentration and membrane potential in vascular smooth muscle cells Original Research Article

406

Influence of cellularity in human breast carcinoma

407

Influence of Cellulolytic Bacterial Augmentation on Organic Carbon and Available Phosphorus in Sandy Loam Soil under Cultivation

408

Influence of cellulose ether on hydration and carbonation kinetics of mortars

409

Influence of cellulose ethers molecular parameters on hydration kinetics of Portland cement at early ages

410

Influence of cellulose nanofibers on the curing behavior of epoxy/amine systems

411

Influence of cellulose oxygen isotope variability in sub-fossil Sphagnum and plant macrofossil components on the reliability of paleoclimate records at the Mer Bleue Bog, Ottawa, Ontario, Canada

412

Influence of cellulose reinforcers on gas transport through natural rubber

413

Influence of cement addition on the geotechnical properties of an Iranian clay

414

Influence of cement and superplasticizers type and dosage on the fluidity of cement mortars—Part I

415

Influence of cement composition on the early age flexural strength of heat-treated mortar prisms

416

Influence of cement constitution and temperature on chloride binding in cement paste

417

Influence of cement content on concrete performance in corrosive environments (sea water)

418

Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times

419

Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete

420

Influence of cement grouts composition on the rheological behaviour

421

Influence of cement kiln dust substitution on the mechanical properties of concrete

422

Influence of cement properties on new generation superplasticizers performance

423

Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC

424

Influence of cement type in reinforcement corrosion of mortars under action of chlorides

425

Influence of cement type on ITZ porosity and chloride resistance of self-compacting concrete

426

Influence of cement type on the marginal adaptation of all-ceramic MOD inlays

427

Influence of cementitious binder content on moisture transport in stabilised earth materials analysed using 1-dimensional sharp wet front theory

428

Influence of cement-silica ratio on the moulding properties of Portland cement bonded sand

429

Influence of central cracks on buckling and post-buckling behaviour of shear panels

430

Influence of centrifugal forces on the development of wave packets in boundary layers with a uniformly valid model

431

Influence of CeO2 addition on crystal growth behavior of CeO2–Y2O3–ZrO2 solid solution

432

Influence of CeO2 addition on the electrical and optical properties of lithium borate glasses Original Research Article

433

Influence of CeO2 morphology on the catalytic oxidation of ethanol in air

434

Influence of CeO2 on NOx emission during iron ore sintering

435

Influence of CeO2 on scintillating properties of Tb3+-doped silicate glasses

436

Influence of CeO2 on the microstructure and wear resistance of iron-based alloy coating studied by Rietveld refinement method

437

Influence of ceramic coating of MgO on oxidation behavior and descaling ability of low alloy steel

438

Influence of ceramic oxide materials on lithium based potentiometric CO2 sensors

439

Influence of ceramic oxide materials on lithium based potentiometric CO2 sensors

440

Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements

441

Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agents

442

Influence of ceramic thickness on residual stress and bonding strength for plasma sprayed duplex thermal barrier coating on aluminum alloy

443

Influence of ceramic–metal interface adhesion on crack growth resistance of ZrO2–Nb ceramic matrix composites Original Research Article

444

Influence of cereal non-starch polysaccharides and enzyme supplementation on digestion site and gut environment in weaned piglets

445

Influence of cereal type and the inclusion of sunflower meal as a source of additional dietary fibre on nutrient retention, growth performance and digestive organ size in broilers from one to twenty-one days of age

446

Influence of ceria addition on thermal properties and local structure of bismuth germanate glasses

447

Influence of Ceria and Lanthana Promoters on the Kinetics of NO and N2O Reduction by CO over Alumina-Supported Palladium and Rhodium

448

Influence of ceria and nickel addition to alumina-supported Rh catalyst for propane steam reforming at low temperatures Original Research Article

449

Influence of ceria on the NOx storage/reduction behavior of lean NOx trap catalysts

450

Influence of ceria promoter on shell-powder-supported Pd catalyst for the complete oxidation of benzene Original Research Article

451

Influence of cerium (III) ions on corrosion and hydrogen evolution of carbon steel in acid solutions

452

Influence of cerium addition on microstructure and properties of Sn–Cu–(Ag) solder alloys

453

Influence of Cerium and Yttrium on Cu-Cr-Zr Alloys

454

Influence of cerium on hot workability of 00Cr25Ni7Mo4N super duplex stainless steel

455

Influence of cerium on the microstructure and mechanical properties of ZA104 and ZA104 + 0.3Ca magnesium alloys

456

Influence of cerium on the microstructure, mechanical properties and corrosion resistance of magnesium alloy

457

Influence of cerium on the performance of LaMO3+λ (M = Mn or Mn–Cu) perovskite-type catalyst

458

Influence of cerium on the performance of LaMO3+λ (M = Mn or Mn–Cu) perovskite-type catalyst

459

Influence of cerium on the pulsed UV nanosecond laser processing of photostructurable glass ceramic materials

460

Influence of cerium oxide on the formation and oxidation of soot

461

INFLUENCE OF CERTAIN PREY TYPES ON SOME BIOLOGICAL CHARACTERISTICS OF Chrysoperla carnea (STEPH.) UNDER CONSTANT TEMPERATURE AND RELATIVE HUMIDITY.

462

Influence of Cervitec gel on periodontal health of patients wearing fixed orthodontic appliances

463

Influence of cetane improvers on the air quality in an urban street canyon

464

Influence of CETP gene variation on plasma lipid levels and coronary heart disease: a survey in Taiwan

465

Influence of cetyltrimethylammonium bromide on the morphology of AWO4 (A = Ca, Sr) prepared by cyclic microwave irradiation

466

Influence of Cetyltrimethylammonium Bromide on the Voltammetric Behavior of Thiopurines at a Silver Electrode

467

Influence of Cetyltrimethylammonium Bromide on the Voltammetric Behavior of Thiopurines at a Silver Electrode

468

Influence of CF3I, CF3Br, and CF3H on the high-temperature combustion of methane

469

Influence of c-factor and layering technique on microtensile bond strength to dentin

470

Influence of CFC quality on the performance of TS limiter elements under cyclic heat loading

471

Influence of CH3 group of μ-N–C–S ligand on the properties of [Fe2(C4H5N2S)2(NO)4] complex

472

Influence of CH3 substituents on tetrahydropyrimidin-2-ylidene: σ-donating properties and in situ catalytic activities of precursor salts/Pd(OAc)2 system for C–C coupling reactions

473

Influence of CH3COO– on the room temperature photoluminescence of ZnO films prepared by CVD

474

Influence of chain architecture on phase behaviour of styrene-(styrene/butadiene)-styrene triblock copolymers and their binary blends

475

Influence of chain extender length of aromatic dimethacrylates on polymer network development

476

Influence of chain length and degree of branching of alcohol + chlorobenzene mixtures on determination and modelling of VE by CEOS and CEOS/GE mixing rules

477

Influence of chain length and N-alkylation on the selective serotonin receptor ligand 9-(aminomethyl)-9,10-dihydroanthracene

478

Influence of chain length in nonyl-phenol ethoxylate surfactants on the film formation behaviour of methylmethacrylate-2-ethylhexyl acrylate copolymer latexes: part 1. Differential scanning calorimetry and atomic force microscopy

479

Influence of chain length on adsorption of xanthates on chalcopyrite

480

Influence of chain length on mono- versus di-alkylation in the reactivity of [Pt2(μ-S)2(PPh3)4] towards α,ω-dihalo-n-alkanes; a synthetic route to platinum(II) ω-haloalkylthiolate complexes

481

Influence of chain microstructure on the conformational behavior of ethylene-1-olefin copolymers. Impact of the comonomeric mole content and the catalytic inversion ratio

482

Influence of change in land use on the refractory organic macromolecular fraction of a sandy spodosol (Landes de Gascogne, France)

483

Influence of changes in land use and earthworm activities on carbon and nitrogen dynamics in a steepland ecosystem in Northern Vietnam

484

Influence of changes in stem positioning on femoral loading after THR using a short-stemmed hip implant

485

Influence of changes in the prestress force on dynamic specifications of the prestressed concrete beam

486

Influence of changes in the resistivity of the sample surface on ultra-shallow SIMS profiles for arsenic

487

Influence of changes of platinum electrode surface condition on the kinetics of the oxidation of sodium dithionite and sulfite in alkaline solution

488

Influence of changing pulse repetition frequency on chemical and biological effects induced by low-intensity ultrasound in vitro

489

Influence of changing pulse repetition frequency on chemical and biological effects induced by low-intensity ultrasound in vitro

490

Influence of channel aspect ratio on heat transfer characteristics in sharp-turn connected two-pass channels with inclined divider wall

491

Influence of channel aspect ratio on heat transfer in rotating rectangular ducts with skewed ribs at high rotation numbers

492

Influence of channel height on heat transfer augmentation in rectangular channels with two opposite rib-roughened walls

493

Influence of channel shape on the thermal and hydraulic performance of microchannel heat sink

494

Influence of channel tortuosity on the lightning return stroke electromagnetic field in the time domain

495

Influence of channel-height on heat transfer in rectangular channels with skewed ribs at different bleed conditions

496

Influence of channel-width ratio on solvent extraction through a double-pass parallel-plate membrane module

497

Influence of chaos on the fusion enhancement by electron screening

498

Influence of char formation conditions on pressurized black liquor gasification rates Original Research Article

499

Influence of char structure on reactivity and nitric oxide emissions

500

Influence of characterised natural organic material on activated carbon adsorption: I. Characterisation of concentrated reservoir water

501

Influence of characterised natural organic material on activated carbon adsorption: II. Effect on pore volume distribution and adsorption of 2-methylisoborneol

502

Influence of Characteristics of Inhaled Fibres on Development of Tumours in the Rat Lung

503

Influence of Characteristics of Inhaled Fibres on Development of Tumours in the Rat Lung

504

Influence of charge density on rheological properties and dehydration dynamics of weakly charged poly(N-isopropylacrylamide) during phase transition

505

Influence of charge density on the swelling of colloidal poly(N-isopropylacrylamide-co-acrylic acid) microgels

506

Influence of charge density, sulfate group position and molecular mass on adsorption of chondroitin sulfate onto coral

507

Influence of charge deposition in a field-emission display panel

508

Influence of Charge Doping on Thermal Diffusivity of Double Perovskite Sr2FeMoO6 Studied by Mirage Effect

509

Influence of charge mode on the capacity and cycle life of lead–acid battery negative plates

510

Influence of charge placement on the thermal and morphological properties of sulfonated segmented copolyesters

511

Influence of charge size distribution on net-power draw of tumbling mill based on DEM modelling

512

Influence of charge state on the reaction of with carbon monoxide

513

Influence of charge transfer characteristics on size-related effects of organic nanoparticles

514

Influence of charge type on measurements with an in-mill sensor

515

Influence of charged impurities on the surface phases of Sn/Ge(1 1 1)

516

Influence of charged microenvironment on redox potential and diffusion coefficient of [Fe4S4(SPh)4](NBu4)2 in DMF and inside CTAB film on electrode surface

517

Influence of charged particle bombardment and sputtering parameters on the properties of HfO2 films prepared by dc reactive magnetron sputtering

518

Influence of charge-transfer state on luminescence properties of Eu(III) complex with o-phenylenedioxydicarboxylic acid

519

Influence of charging conditions on permeability for the membrane of porous polytetrafluoroethylene (PTFE) film electret

520

Influence of charging energy on Cooper pair tunneling in Bi-2212 small intrinsic Josephson junctions

521

Influence of charging parameters on the effectiveness of electrochemical hydrogen storage in activated carbon

522

INFLUENCE OF CHARGING SYSTEM DESIGN FEATURES ON BLAST FURNACE CHARGE DISTRIBUTION

523

Influence of cheese ripening and rate of cooling of the processed cheese mixture on rheological properties of processed cheese Original Research Article

524

Influence of cheese-making technology on composition and microbiological characteristics of Vastedda cheese

525

Influence of chelaters in crystallization of K2SO4

526

Influence of chelating agent and reaction time on the swelling process for preparation of porous TiO2 particles

527

Influence of chelating agents on plant uptake of 51Cr, 210Pb and 210Po Original

528

Influence of chelating agents on the growth and photoelectrochemical responses of chemical bath-synthesized AgIn5S8 film electrodes

529

Influence of chelating silyl scavengers on the diastereoselectivity of chromium catalyzed pinacol cross couplings

530

Influence of chelating/fuel agents on the structural features, magnetic and dielectric properties of Ni ferrite

531

Influence of chemical activation of a 35% hydrogen peroxide bleaching gel on its penetration and efficacy—In vitro study

532

Influence of chemical activation of a 35% hydrogen peroxide bleaching gel on its penetration and efficacy—In vitro study

533

Influence of chemical additives on the formation of super-fine calcium carbonate

534

Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil

535

Influence of chemical agents commonly used for soil fauna investigations on the stable C-isotopic signature of soil animals

536

Influence of Chemical and Biological Fertilizers on Agro-Physiological Characteristics of Corn (Zea mays L., S.C. 703)

537

Influence of chemical and mineralogical properties of organic amendments on the selection of an adequate analytical procedure for trace elements determination

538

Influence of chemical and organic fertilizer on growth, yield and essential oil of dragonhead (Dracocephalum moldavica L.) plant

539

Influence of chemical and physical characteristics of cement kiln dusts (CKDs) on their hydration behavior and potential suitability for soil stabilization

540

Influence of chemical and physical conditions on the production of bacteriocin by Aeromonas hydrophila

541

Influence of chemical and physical modification on the bile acid binding capacity of dietary fibre from lupins (Lupinus angustifolius L.)

542

Influence of chemical and physical properties of the last generation of silicon carbide fibres on the mechanical behaviour of SiC/SiC composite

543

Influence of chemical bond length changes on the crystal field strength and “ligand–metal” charge transfer transitions in Cs2GeF6 doped with Mn4+ and Os4+ ions Original Research Article

544

Influence of chemical characteristics of humic substances on the partition coefficient of a chlorinated dioxin

545

Influence of chemical composition and magnetic effects on the elastic properties of fcc Fe–Mn alloys Original Research Article

546

Influence of chemical composition and manufacturing conditions on properties of NiTi shape memory alloys

547

Influence of chemical composition and physical structure on normal radiant emittance characteristics of ash deposits

548

Influence of chemical composition and pre-heating temperature on the structure and martensitic transformation in porous TiNi-based shape memory alloys, produced by self-propagating high-temperature synthesis

549

Influence of chemical composition and prior microstructure on diode laser hardening of railroad steels

550

Influence of chemical composition and structural factors of Fe2O3/In2O3 sensors on their selectivity and sensitivity to ethanol

551

Influence of chemical composition of filler’s surface on the burning of foam plastics

552

Influence of chemical composition of polysaccharides on aroma retention

553

Influence of chemical composition of zirconium alloy E110 on embrittlement under LOCA conditions – Part 1: Oxidation kinetics and macrocharacteristics of structure and fracture

554

Influence of chemical composition on dielectric properties of Al2O3 and ZrO2 plasma deposits

555

Influence of Chemical Composition on Phase Transformation Temperature and Thermal Expansion Coefficient of Hot Work Die Steel Original Research Article

556

Influence of chemical composition on sintering ability of ZTA ceramics consolidated from freeze dried granules

557

Influence of chemical composition on the damping characteristics of Cu–Al–Ni shape memory alloys

558

Influence of chemical composition, phase and thickness of TiOx (x ≤ 2) seed layer on the growth and orientation of the perovskite phase in sputtered PZT thin films

559

Influence of chemical composition, prior deformation and prolonged thermal aging on the sensitization characteristics of austenitic stainless steels

560

Influence of chemical conditioning on the ion exchange capacity and on kinetic of zinc uptake by clinoptilolite

561

Influence of chemical crosslinks on the elastic behavior of segmented block copolymers

562

Influence of chemical degradation on mechanical behavior of a petroleum cement paste

563

Influence of chemical modification of activated carbon surface on characteristics of supercapacitors

564

Influence of chemical modification of anthracite on the porosity of the resulting activated carbons Original Research Article

565

Influence of chemical modification on the porous structure of polymeric adsorbents

566

Influence of chemical moieties and the flexible chain for the tilted smectic phases in linear hydrogen bonded liquid crystals with Schiff based pyridene derivatives

567

Influence of chemical nature of organic wastes on their conversion to hydrogen by heat-shock digested sludge

568

Influence of Chemical Parameters on Artemia sp. (Crustacea: Anostraca) Population in Al Wathba Lake in the Abu Dhabi Emirate, UAE

569

Influence of chemical parameters on selectivity and recovery of fine coal through flotation

570

Influence of Chemical Permeation Enhancers on the in vitro Skin Permeation of Minoxidil through Excised Rat Skin: A Mechanistic Study

571

Influence of chemical pollution on brain adenosine receptors of Mugil cephalus

572

Influence of chemical potential on the computer simulation of hydrogen storage in single-walled carbon nanotube array

573

Influence of chemical prehistory on the phase formation and electrochemical performance of LiCoO2 materials

574

Influence of chemical processing on the morphology, crystalline content and thermal stability of multi-walled carbon nanotubes

575

Influence of chemical reaction and thermal radiation on mixed convection heat and mass transfer over a stretching sheet in Darcian porous medium with Soret and Dufour effects

576

INFLUENCE OF CHEMICAL REACTION ON TRANSIENT MHD FREE CONVECTIVE FLOW OVER A VERTICAL PLATE IN SLIP-FLOW REGIME

577

Influence of chemical reaction rate, diffusion and pore structure on the regeneration of a coked Al2O3-catalyst Original Research Article

578

Influence of chemical structure of dyes, of pH and of inorganic salts on their photocatalytic degradation by TiO2 comparison of the efficiency of powder and supported TiO2

579

Influence of chemical structure of short chain pendant groups on gas transport properties of cross-linked poly(ethylene oxide) copolymers

580

Influence of chemical structure on enzymatic degradation of single crystals of PCL-b-PEO amphiphilic block copolymer

581

Influence of chemical structures of benzodioxole-based coinitiators on the properties of the unfilled dental resin

582

Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(lactide) based bionanocomposites

583

Influence of chemical surface treatments on adhesion of fiber posts to composite resin core materials

584

Influence of chemical synthesis on the crystallization and properties of zinc oxide

585

Influence of chemical treatments on the photoinduced charge carrier kinetics of nanocrystalline porous TiO2 films

586

Influence of chemical, enzymatic and phytogenic ensiling preparations on digestibility, degradability and PDI and NEL content of lucerne and red clover

587

Influence of chemically prepared H2SO4-graphite intercalation compound (GIC) precursor on parameters of exfoliated graphite (EG) for oil sorption from water

588

Influence of chemi-ionization and chemi-recombination processes on the population of hydrogen Rydberg states in atmospheres of late type dwarfs

589

Influence of chemisorption on the thermal conductivity of graphene nanoribbons Original Research Article

590

Influence of chemisorption products of carbon dioxide and water vapour on radiolysis of tritium breeder

591

Influence of chemistry and microstructure on the activation volume of TiAl alloys

592

Influence of Chemotherapy on the Lipid Peroxidation and Antioxidant Status in Patients with Acute Myeloid Leukemia

593

Influence of chestnut tannins on welfare, carcass characteristics, meat quality, and lipid oxidation in rabbits under high ambient temperature

594

Influence of chickpea genotype and Bacillus sp. on protection from Fusarium wilt by seed treatment with nonpathogenic Fusarium oxysporum

595

INFLUENCE OF CHICKS AND FOOD QUALITY ON FOOD CALLING IN BROODY DOMESTIC HENS

596

INFLUENCE OF CHICKS AND FOOD QUALITY ON FOOD CALLING IN BROODY DOMESTIC HENS

597

Influence of childhood sexual abuse on pregnancy, delivery, and the early postpartum period in adult women

598

Influence of chipping device and storage method on the quality of SRC poplar biomass

599

Influence of chips, lees and micro-oxygenation during aging on the phenolic composition of a red Sangiovese wine

600

Influence of chiral thiols on the diastereoselective synthesis of γ-lactams from cyclic anhydrides

601

Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils

602

Influence of chitosan and NaCl on physicochemical properties of low-acid tuna oil-in-water emulsions stabilized by non-ionic surfactant

603

Influence of chitosan and porosity on heat and mass transfer in chitosan-treated porous fibrous material

604

Influence of chitosan characteristics on the coagulation and the flocculation of bentonite suspensions

605

Influence of chitosan concentration on the stability, microstructure and rheological properties of O/W emulsions formulated with high-oleic sunflower oil and potato protein

606

Influence of chitosan on stability and lipase digestibility of lecithin-stabilized tuna oil-in-water emulsions

607

Influence of Chlamydia pneumoniae infection on aortic stiffness in healthy young men

608

Influence of chlorhexidine digluconate on the clinical performance of adhesive restorations: A 3-year follow-up

609

Influence of chlorhexidine digluconate on the clinical performance of adhesive restorations: A 3-year follow-up

610

Influence of chlorhexidine on the degree of conversion and E-modulus of experimental adhesive blends

611

Influence of chloride and bromide anions on localized corrosion of 15%Cr ferritic stainless steel

612

Influence of chloride ion concentration and temperature on the electrochemical properties of passive films formed on a superduplex stainless steel

613

Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels

614

Influence of chloride ion on electrochemical degradation of phenol in alkaline medium using bismuth doped and pure PbO2 anodes

615

Influence of chloride ions on cadmium adsorptions by oxides, hydroxides, oxyhydroxides, and phyllosilicates

616

Influence of chloride ligands on the structure of Zn– and Cd–metallothionein species

617

Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions

618

Influence of chlorine content on PtRe interaction and coke deposition Original Research Article

619

Influence of chlorine dioxide on cell death and cell cycle of human gingival fibroblasts

620

Influence of chlorine on planar optical guide cladded with RbCl and AgCl

621

Influence of Chlorine on the Activity and Stability of Pt/Al2O3 Catalysts in the Complete Oxidation of Toluene

622

Influence of chlorine on the catalytic properties of supported rhodium, iridium and platinum in ring opening of naphthenes Original Research Article

623

Influence of chlorine substitution on intramolecular hydrogen bond energy and ESIPT barrier: Experimental and theoretical measurements on the photophysics of 3,5-dichlorosalicylic acid

624

INFLUENCE OF CHLORMEQUAT CHLORIDE ON FIVE WINTER BARLEY CULTIVARS

625

Influence of chlorpromazine on renal histology of rats submitted to ischemia and reperfusion injury

626

Influence of choice of analgesic agent on the course and outcome of sickle cell patients presented to ICU with acute chest syndrome

627

Influence of cholesterol on the structure of stratum corneum lipid model membrane

628

Influence of cholesterol-loaded cyclodextrin incorporation on the acrosome reaction of cooled equine spermatozoa

629

Influence of Choline-Based Ionic Liquids as Neoteric Green Solvents on Aqueous Solubility of Lamotrigine and Piroxicam Drugs

630

Influence of cholinergic circuitries in generation of high-frequency somatosensory evoked potentials

631

Influence of chopping length on capacities, labour time requirement and costs in the harvest and ensiling chain of maize

632

Influence of chromate, molybdate and tungstate on pit formation in chloride medium

633

Influence of Chromatin and Single Strand Binding Proteins on the Activity of an Archaeal MCM

634

Influence of chromatographic conditions on separation in comprehensive gas chromatography

635

Influence of chrome-bearing sols vacuum impregnation on the properties of magnesia-chrome refractory

636

Influence of chromium and vanadium in the mechanical resistance of steels

637

Influence of chromium carbide coating on tribological performance of steel

638

Influence of chromium content on the dry machining performance of cathodic arc evaporated TiAlN coatings

639

Influence of chromium content on the optical and electrical properties of Li1 + xCrxTi2 − x(PO4)3

640

Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate

641

Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate

642

Influence of Chromium on Mechanical Properties and CO2/H2S Corrosion Behavior of P110 Grade Tube Steel Original Research Article

643

Influence of chromium on microstructure and sintering properties of FeNiMoCu system prealloyed powders

644

Influence of chromium on minority carrier properties in intentionally contaminated n-type mc-Si wafers

645

Influence of chromophoric electron-withdrawing groups on photoinduced deformation of azo polymer colloids

646

Influence of chromoplast morphology on carotenoid bioaccessibility of carrot, mango, papaya, and tomato

647

Influence of chronic alcohol abuse and liver disease on hepatic aldehyde dehydrogenase activity

648

Influence of Chronic Alcohol Use on Osteoblastic Differentiation of Bone Marrow Cells, Bone Properties, and Hepatic and Renal Morphology of Rats

649

Influence of chronic alcoholism and oestrogen deficiency on the variation of stoichiometry of hydroxyapatite within alveolar bone crest of rats

650

Influence of chronic ethanol intake on mouse synaptosomal aspartyl aminopeptidase and aminopeptidase A: Relationship with oxidative stress indicators

651

Influence of chronic exposure to silver and mercury in the field on the bioaccumulation potential of the bivalve Macoma balthica

652

Influence of chronic levetiracetam intake on cortical excitability

653

Influence of chronic liver disease and chronic renal failure on nutrient metabolism and undernutrition

654

Influence of chronic liver disease on coronary atherosclerosis vulnerability features

655

Influence of Chronic Stroke on Functional Arm Reaching: Quantifying Deficits in the Ipsilesional Upper Extremity

656

Influence of chrysin on hepatic marker enzymes and lipid profile against d-galactosamine-induced hepatotoxicity rats

657

Influence of cigarette smoking on ambulatory blood pressure in patients with essential hypertension

658

Influence of cigarette smoking on rate of reopening of the infarct-related coronary artery after myocardial infarction: multivariate analysis

659

Influence of cigarette smoking on synthesis of eicosanoids, isoprostanes and lipoxygenase metabolites in apical periodontitis

660

Influence of Cigarette Smoking on the Activity of Salivary Alpha-Amylase

661

Influence of cimetidine and its metabolites on Cisplatin—Investigation of adduct formation by means of electrochemistry/liquid chromatography/electrospray mass spectrometry

662

Influence of CIOʹS knowledge-sharing behavior on the quality of the IS/IT strategic planning (ISSP) process in Taiwan

663

Influence of circadian rhythm on mortality after myocardial infarction: Data from a prospective cohort of emergency calls

664

INFLUENCE OF CIRCADIAN TIME AND AGE ON GLOMERULAR ANGIOTENSIN II RECEPTORS IN NORMOTENSIVE SPRAGUE-DAWLEY AND TRANSGENIC HYPERTENSIVE TGR(mREN2)27 RATS

665

Influence of Circuit Imperfections on the Performance of DACs

666

Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading

667

Influence of circumferential flaw length on internal burst pressure of a wall-thinned pipe

668

Influence of cis-protecting groups toward ligand exchange reactions in polynuclear Pd(II)-based coordination cages

669

Influence of citrate and EDTA anticoagulants on plasma malondialdehyde concentrations estimated by high-performance liquid chromatography

670

INFLUENCE OF CITRATE NANOPARTICLES ON PHOTOCHEMICAL ACTIVITY, RESISTANCETO PATHOGENS AND PRODUCTIVITY OF WHEAT

671

Influence of citrate/nitrate ratio on the preparation of Li0.5La0.5TiO3 nanopowder by combustion method

672

Influence of citrate–nitrate reaction mixture packing on ceramic powder properties

673

INFLUENCE OF CITRATES NANOPARTICLES ON MORPHOLOGICAL TRAITS OF BACTERIAL CELLS PSEUDOMONAS SYRINGAE РV. ATROFACIENS

674

Influence of citrate-to-nitrate ratio on the thermal behavior and chemical environment of alumina gel

675

Influence of citric acid and curing on moisture sorption, diffusion and permeability of starch films

676

Influence of citric acid on the hydration of Portland cement

677

Influence of citric acid on the morphology and magnetic properties of barium ferrite thin films

678

Influence of clamping force on the performance of PEMFCs

679

Influence of class F fly ash on the abrasion–erosion resistance of high-strength concrete

680

Influence of classification levels of ram sexual activity on spring breeding ewes

681

Influence of Clavicipitaceous Endophyte Infection in Ryegrass on Development of the ParasitoidMicroctonus hyperodaeLoan (Hymenoptera: Braconidae) inListronotus bonariensis(Kuschel) (Coleoptera: Curculionidae)

682

Influence of clay addition on the properties of olive oil in water emulsions

683

Influence of clay charge densities and surfactant loading amount on the microstructure of CTMA–montmorillonite hybrids

684

Influence of clay content and acidity of soil on development of the earthworm Lumbricus rubellus and its population level consequences

685

Influence of Clay Content in Reservoir Rocks on Efficiency of Killing Production Wells

686

Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene composites

687

Influence of clay in limestone fillers for self-compacting cement based composites

688

Influence of clay mineralogy on the stability of a landslide in Plio-Pleistocene clay sediments near Grassano (Southern Italy)

689

Influence of clay minerals addition on mechanical properties of air lime–metakaolin mortars

690

Influence of clay minerals on the Bacillus halophilus Y38 activity under anaerobic condition

691

Influence of clay minerals on the reduction of Cr6+ by citric acid Original Research Article

692

Influence of clay modification process in PA6-layered silicate nanocomposite properties

693

Influence of clay on the vulcanization kinetics of fluoroelastomer nanocomposites

694

Influence of Clay on Time Domain Induced Polarization

695

Influence of clay organic modifier on the thermal-stability of PLA based nanocomposites

696

Influence of clays on the rheology of cement pastes

697

Influence of clays on the shrinkage and cracking tendency of SCC

698

Influence of cleaning frequency and membrane history on fouling in an anaerobic membrane bioreactor Original Research Article

699

Influence of cleaning using water and surfactants on the performance of photovoltaic panels

700

Influence of Cleanliness on Mechanical Property of 40CrNi2Mo Steel Original Research Article

701

Influence of clear versus ambiguous normative information on food intake

702

Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: A finite element study with biphasic acetabular cartilage properties

703

Influence of clearances on the energy performance of window-type air-conditioners at the same level outside residential buildings

704

Influence of clear-cutting on the risk of wind damage at forest edges

705

Influence of climate and hydrology on carbon in an early Miocene peatland

706

Influence of climate change on interannual variation in contaminant body burden in Gulf of Mexico oysters

707

Influence of Climate Change on Natural Degreening of Lemons (Citrus limon L. Burm. f)

708

Influence of climate change on short term management of field crops – A modelling approach

709

Influence of climate conditions on aflatoxin M1 contamination in raw milk from Minas Gerais State, Brazil

710

Influence of climate fluctuations and changes in catchment land use on Late Holocene and modern beach-ridge sedimentation on a tropical macrotidal coast: Keppel Bay, Queensland, Australia

711

Influence of climate on seasonal patterns of stem increment of balsam fir in a boreal forest of Québec, Canada

712

Influence of climate parameters and management of permanent grassland on biogas yield and GHG emission substitution potential

713

Influence of climate variability on representative QDF predictions of the upper Blue Nile basin

714

Influence of climate variability on the atmospheric transport of Icelandic tephra in the subpolar North Atlantic

715

Influence of climate, fire severity and forest mortality on predictions of long term streamflow: Potential effect of the 2009 wildfire on Melbourne’s water supply catchments

716

Influence of climate, sea-level changes and tectonics on ichnoassemblages distribution in a carbonate-dominated, deep-marine environment (Upper Paleocene, Zumaya section)

717

Influence of climatic conditions and control logic on NOx and CO emissions of a micro-cogeneration unit serving an Italian residential building

718

Influence of climatic conditions and soil type on 99TcO4– uptake by rye grass

719

Influence of climatic conditions on the phenolic composition of Vitis vinifera L. cv. Graciano Original Research Article

720

Influence of Climatic Factors on Forage Production and Vegetation Cover of Iran's Upland Rangeland (Jashloobar Rangeland, Semnan Province)

721

Influence of Climatic Factors on Fusarium Species Pathogenic to Cereals

722

Influence of Climatic Factors on Malaria Epidemic in Gulu District, Northern Uganda: A 10-Year Retrospective Study

723

INFLUENCE OF CLIMATIC FACTORS ON POPULATION DENISTY OF LAND SNAILS INFESTING SOME CROPS AND THEIR DAMAGE QUESSNA DISTRICT (MINUFYA GOVERNORATE).

724

Influence of climatic factors on the development of pneumonia in lambs

725

Influence of climatic variability on local population dynamics of a Sonoran Desert platyopuntia

726

Influence of climatological cycles on hydraulic heads across a Spanish aquifer

727

Influence of clinical case definitions with differing levels of sensitivity and specificity on estimates of the relative and absolute health benefits of influenza vaccination among healthy working adults and implications for economic analyses

728

Influence of clinical trial enrollment on the quality of care and outcomes for patients with non–ST-segment elevation acute coronary syndromes

729

Influence of clinician workload and patterns of treatment on survival from breast cancer

730

Influence of Clonidine on the Chemodynamic Stability and Stress Response in the Course of Surgery on General Anesthesia

731

Influence of cloning by chromatin transfer on placental gene expression at Day 45 of pregnancy in cattle

732

Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation Original Research Article

733

Influence of clotting time on the protein composition of serum samples based on LC–MS data

734

Influence of Clove Weight on Vegetative Growth and Yield of Garlic (Allium sativum L.) Grown under Drip Irrigation

735

Influence of cluster composition on NLO properties of neutral cubane-like heterothiometallic clusters

736

Influence of cluster mobility on Cu precipitation in α-Fe: A cluster dynamics modeling Original Research Article

737

Influence of cluster size and surface functionalization of ZnO nanoparticles on the morphology, thermomechanical and piezoelectric properties of P(VDF-TrFE) nanocomposite films

738

Influence of cluster states on band dispersion in bulk and quantum well (ultra-)dilute nitride semiconductors

739

Influence of cluster zone leaf removal on Pinot noir grape chemical and volatile composition

740

Influence of clusters on Bi LMIS properties

741

Influence of clusters on Bi LMIS properties

742

Influence of Co addition on constituent phases and performance of a NiCrAlYRe alloy system

743

Influence of CO adsorption on the magnetism of small Co particles deposited on Al2O3

744

Influence of CO concentration and reactant gas pressure on cell performance in PAFC

745

Influence of Co content on the characterization and magnetic properties of magnetite

746

Influence of Co content on the structure and magnetic permeability of nanocrystalline (Fe1−xCox)73.5Cu1Nb3Si13.5B9 alloys

747

Influence of Co doping content on its valence state in Zn1−xCoxO (0 ≤ x ≤ 0.15) thin films

748

Influence of Co doping on structural, optical and magnetic properties of BiFeO3 films deposited on quartz substrates by sol–gel method

749

Influence of CO on Titan atmospheric reactivity

750

Influence of Co substitution and Cu addition on structural, electrical, transport and electrochemical properties of LixNi0.9 − yCoyMn0.1O2 cathode materials

751

Influence of Co substitution for Ni and Mn on the structural and electrochemical characteristics of LiNi0.5Mn1.5O4

752

Influence of Co substitution on magnetic properties and thermal expansion of Nd6Fe13Si intermetallic compound

753

Influence of Co(CH3COO)2 concentration on thermal emissivity of coatings formed on titanium alloy by micro-arc oxidation

754

Influence of Co, Ga and Si on the microstructure and the magnetic properties for nanocomposite permanent alloys

755

Influence of Co, Ni and Zn substitution for Cu on the structural and superconducting properties of (Hg0.7Cr0.3)Sr2CuO4+δ Original Research Article

756

Influence of CO2 activation on hydrogen storage behaviors of platinum-loaded activated carbon nanotubes

757

Influence of CO2 and H2 on the low-temperature water–gas shift reaction on Au/CeO2 catalysts in idealized and realistic reformate

758

Influence of CO2 and H2O on the separation of hydrogen over two types of Pd membranes: Thin metal membrane and pore-filling-type membrane

759

Influence of CO2 dynamics on the longitudinal variation of incision rates in soluble bedrock channels: Feedback mechanisms

760

Influence of CO2 laser heat treatment on surface properties, electrochemical and tribological performance of HVOF sprayed WC–24%Cr3C2–6%Ni coating

761

Influence of CO2 Laser Irradiation and CPP-ACP Paste Application on Demineralized Enamel Microhardness

762

Influence of CO2 on the oxygen permeation performance and the microstructure of perovskite-type (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ membranes

763

Influence of CO2 on the oxygen permeation performance of perovskite-type BaCoxFeyZrzO3−δ hollow fiber membranes

764

Influence of CO2, CH4, and initial temperature on H2/CO laminar flame speed

765

Influence of co-administration of oral insulin and docosahexaenoic acid in mice

766

Influence of coal bottom ash as fine aggregate on fresh properties of concrete

767

Influence of coal briquette size on the combustion kinetics

768

Influence of coal composition on the release of Na-, K-, Cl-, and S-species during the combustion of brown coal

769

Influence of coal dust on premixed turbulent methane–air flames

770

Influence of coal dust on the ignition of methane/air mixtures by friction sparks from rubbing of titanium against steel

771

Influence of coal forced oxidation on technological properties of cokes produced at laboratory scale

772

Influence of coal particle size on particulate matter emission and its chemical species produced during coal combustion

773

Influence of coal tar–water emulsion on carbonisation of caking coals

774

Influence of coal thermoplastic properties on coking pressure generation: Part 2 – A study of binary coal blends and specific additives

775

Influence of coalescence and interfacial tension on the morphology of PP/HDPE compatibilized blends

776

Influence of coalescence behaviour of the liquid and of gas sparging on hydrodynamics and bubble characteristics in a bubble column

777

Influence of coal-feed rates on bituminous coal ignition in a full-scale tiny-oil ignition burner

778

Influence of coanions on construction of copper(II)/4,4′-dipyridyl sulfide(dps) coordination polymers

779

Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete

780

Influence of coarse particles on microstructure of aluminum nitride sintered body

781

Influence of coat colour, season and physiological status on reproduction of rabbit does in an Algerian local population

782

Influence of coated seeds on soil organisms tested with bait lamina

783

Influence of coating and thermal annealing on the structure and luminescence properties of CuO nanorods

784

Influence of Coating Application Methods on the Postharvest Quality of Cassava

785

Influence of coating conditions on the H2 separation performance from H2/CH4 gas mixtures by the PDMS/PEI composite membrane

786

Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet coatings

787

Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites

788

Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete

789

Influence of coating thickness and substrate elasticity on the tribological performance of PEEK coatings

790

Influence of coating thickness and temperature on mechanical properties of steel deposited with Co-based alloy hardfacing coating

791

Influence of coating thickness on rolling contact fatigue of alumina ceramics thermally sprayed on steel roller

792

Influence of coating thickness on the galvanic corrosion properties of Mg oxide in an engine coolant

793

Influence of coatings on microstructure and mechanical properties of preceramic paper-derived porous alumina substrates

794

Influence of co-authorship networks in the research impact: Ego network analyses from Microsoft Academic Search

795

Influence of coaxial-rod- and coaxial-blade-type baffles on bed expansion in gas–solid fluidization

796

Influence of cobalt and manganese content on the dehydrogenation capacity and kinetics of air-exposed LaNi5+x-type alloys in solid gas and electrochemical reactions

797

Influence of cobalt content on nanostructured alpha-phase-nickel hydroxide modified electrodes for electrocatalytic oxidation of isoniazid

798

Influence of cobalt on phase transitions in Ni50Mn37Sn13

799

Influence of cobalt on structural and magnetic properties of nickel ferrite nanoparticles

800

Influence of cobalt oxide addition on electrical properties of ZnO-Pr6O11-based varistor ceramics

801

Influence of cobalt phase on mechanical properties and thermal shock performance of Al2O3–TiC composites

802

Influence of cobalt precursor and fuels on the performance of combustion synthesized Co3O4/γ-Al2O3 catalysts for total oxidation of methane Original Research Article

803

Influence of cobalt substitution on the magnetic properties of zinc nanocrystals synthesized via micro-emulsion route

804

Influence of co-bivalent ions in Cu-containing LDHs and solvent on hydroxylation of benzene to phenol

805

Influence of co-cations in the selective catalytic reduction of NO by NH3 over copper exchanged faujasite zeolites

806

Influence of cocoa butter refining on the quality of milk chocolate Original Research Article

807

Influence of co-combustion of coal/biomass on the corrosion

808

Influence of coconut water on hemostasis

809

Influence of cod freshness on the salting, drying and desalting stages Original Research Article

810

Influence of COD:N:P Ratio on Nitrogen and Phosphorus Removal in Fixed-Bed Filter

811

Influence of codeposition of copper on the structure and morphology of electroless Ni–W–P alloys from sulphate- and chloride-based baths

812

Influence of coding strategies in electric-acoustic hearing: A simulation dedicated to EAS cochlear implant, in the presence of noise

813

Influence of co-doping different rare earth ions on CaGa2S4: Eu2+, RE3+(RE=Ln) phosphors Original Research Article

814

Influence of co-doping different rare earth ions on the luminescence of CaAl2O4-based phosphors

815

Influence of co-doping of Zn(II)+Fe(III) on the photocatalytic activity of TiO2 for phenol degradation

816

Influence of Co-doping on the thermal, structural, and optical properties of sol–gel derived ZnO nanoparticles

817

Influence of co-down-regulation of caspase-3 and caspase-7 by siRNAs on sodium butyrate-induced apoptotic cell death of Chinese hamster ovary cells producing thrombopoietin

818

Influence of coefficient of friction on fretting fatigue crack nucleation prediction

819

Influence of coenzyme Q10 and cerivastatin on the flow-mediated vasodilation of the brachial artery: results of the ENDOTACT study

820

Influence of CO-evolving groups on the activity of activated carbon fiber for SO2 removal

821

Influence of co-existed benzo[a]pyrene and copper on the cellular characteristics of Stenotrophomonas maltophilia during biodegradation and transformation

822

Influence of coexistent salt on hydrothermal synthesis of smectite and film-formability of the smectite

823

Influence of coexisting Al2O3 on the activity of copper catalyst for water–gas-shift reaction

824

Influence of coexisting surface-active agents on leachability of dioxins in raw and treated fly ash from an MSW incinerator

825

Influence of Cognettia sphagnetorum (Enchytraeidae) on birch growth and microbial activity, composition and biomass in soil with or without wood ash

826

Influence of cognition on personal activities of daily living (P-ADL) in the acute phase: The Gothenburg Cognitive Stroke Study in Elderly

827

Influence of Cognitive Behavioral Therapy on Psychological Wellbeing and Ego-Resiliency in Type 2 Diabetes Patients in Sabzevar

828

Influence of cognitive distance in vacation choice

829

Influence of coherent structures on mass transfer near stagnation region in agitated small tanks

830

Influence of Cohesion on Scour under Submerged Circular Vertical Jets

831

Influence of cohesive and disruptive forces on strength and erodibility of tropical soils

832

Influence of Coiled Wire Presence on the Convective Heat Transfer Coefficients in R-600 Condensers

833

Influence of cointercalated HF on the electrochemical behavior of highly fluorinated graphite

834

Influence of coion and counterion size on multi-ionic solution nanofiltration

835

Influence of coke deactivation and vanadium and nickel contamination on the performance of low ZSM-5 levels in FCC catalysts Original Research Article

836

Influence of coke deposits on the selectivity of m-xylene transformation and on the isomerization mechanism Original Research Article

837

Influence of coke formation on the conversion of hydrocarbons: I. Alkanes on a USY-zeolite Original Research Article

838

Influence of coke formation on the conversion of hydrocarbons: II. i-Butene on HY-zeolites Original Research Article

839

Influence of coke particle characteristics on the compaction properties of carbon paste material

840

Influence of cold and hot pressing on densification behaviour of titanium alloy powder Ti6Al4V

841

Influence of cold extrusion on the microstructure and mechanical properties of an aluminium alloy previously subjected to equal channel angular pressing

842

Influence of cold pre-fermentation treatments on the major volatile compounds of three wine varieties

843

Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel

844

Influence of cold rolling on sensitization and intergranular stress corrosion cracking of AISI 304 aged at 500 °C

845

Influence of cold rolling reduction on the deformation behaviour and crystallographic orientation development

846

Influence of cold storage and blanching on the carotenoid content of Kintoki carrots Original Research Article

847

Influence of cold storage on pupal development and mortality during storage and on post-storage performance of Encarsia formosa and Eretmocerus eremicus (Hymenoptera: Aphelinidae)

848

Influence of cold storage on soil microbial community level physiological profiles and implications for soil quality monitoring

849

Influence of cold storage on soil microbial community level physiological profiles and implications for soil quality monitoring

850

INFLUENCE OF COLD STORAGE ON THE VIABILITY OF VEDALIA BEETLE, Rodolia cardinalis (MULSANT) (COLEOPTERA: COCCINELLIDAE)

851

Influence of cold weather during casting and curing on the stiffness and strength of concrete

852

Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi

853

Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi

854

Influence of cold work and texture on the high-strain-rate response of Nitinol

855

Influence of cold work to increase swelling of pure iron irradiated in the BR-10 reactor to ∼6 and ∼25 dpa at ∼400°C

856

Influence of cold-pressed canola, brewers grains and hominy meal as dietary supplements suitable for reducing enteric methane emissions from lactating dairy cows

857

Influence of Cold-storage Temperatures on Strawberry Rot Caused by Botrytis cinerea

858

Influence of cold-work and aging heat treatment on strength and ductility of MP35N

859

Influence of cold-work and aging heat treatment on strength and ductility of MP35N

860

Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels

861

Influence of Collateral Circulation on In-Hospital Death From Anterior Acute Myocardial Infarction

862

Influence of colloidal fouling and feed water recovery on salt rejection of RO and NF membranes Original Research Article

863

Influence of colloidal fouling on rejection of trace organic contaminants by reverse osmosis

864

Influence of colloidal nanosilica on ultrafine cement hydration: Physicochemical and microstructural characterization

865

Influence of colloidal templates on the impedance spectroscopic behaviour of Pr0.7Sr0.3Fe0.8Ni0.2O3 for solid oxide fuel cell applications

866

Influence of colloidal-gold films on the luminescence of Eu(TTFA)3 in PMMA

867

Influence of colony genotypic composition on the performance of hygienic behaviour in the honeybee, Apis mellifera L.

868

Influence of color coordinates on the color changes after polymerization and thermocycling of dental resin composites

869

Influence of color on fire vehicle accidents

870

Influence of color parameters of resin composites on their translucency

871

Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer

872

Influence of coloring voltage on the optical performance and cycling stability of a polyaniline–indium hexacyanoferrate electrochromic system

873

Influence of colour changes and moisture content during banana drying on laser backscattering

874

Influence of coloured noise on the extinction risk in structured population models Original Research Article

875

Influence of column temperature on the ion chromatographic separation of aluminum species Original Research Article

876

Influence of columnar microstructure of a sputtered NiAl coating on its oxidation behavior at 1000 °C

877

INFLUENCE OF COMBINATIONS OF ALLELOPATHIC WATER EXTRACTS OF DIFFERENT PLANTS ON WHEAT AND WILD OAT

878

Influence of combinations of sublethal stresses on the control of Vibrio parahaemolyticus and its cellular oxidative response

879

Influence of combined acid treatment on physico-chemical characteristics of ultrastable zeolite Y and on its catalytic properties in the disproportionation of ethylbenzene Original Research Article

880

Influence of combined activation treatments on the success of bovine nuclear transfer using young or aged oocytes

881

Influence of Combined Administration of Turmeric and Black Seed on Selected Biochemical Parameters of Diabetic Rats

882

Influence of combined AFM/current measurement on local electronic properties of silicon thin films

883

Influence of combined alkaline treatment and Fe–Ti-loading modification on ZSM-5 zeolite and its catalytic performance in light olefin production

884

Influence of combined changes in salinity and copper modulation on growth and copper uptake in the tropical green macroalga Ulva reticulata

885

Influence of combined electromagnetic fields on the heat/mass transfer in the Bridgman process

886

Influence of combined incision and fluid overpressure on slope stability: Experimental modelling and natural applications

887

Influence of combined IR-grilling and hot air cooking conditions on moisture and fat content, texture and colour attributes of meat patties Original Research Article

888

Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics

889

Influence of combined thermomechanical treatment on impurity segregation in ferritic–martensitic and austenitic stainless steels

890

Influence of combined treatment with zinc and selenium on cadmium induced testicular pathophysiology in rat

891

Influence of combined vacuum packaging and pomegranate peel extract on shelf life and overall quality of pacific white shrimp (Peneous vannamei) during refrigerated storage

892

Influence of combustion aids on suspension combustion synthesis of mullite powders

893

Influence of combustion conditions on dioxin in an industrial-scale fluidized-bed incinerator: experimental study and statistical modelling

894

Influence of combustion conditions on the PCDD/F-, PCB-, PCBz- and PAH-concentrations in the post-combustion chamber of a waste incineration pilot plant

895

Influence of combustion parameters on NOx production in an industrial boiler

896

Influence of co-metals on bimetallic palladium catalysts for methane combustion

897

Influence of comfort and social stimuli on a comfort movement and a display derived from it

898

Influence of comminution products on abrasive wear during high pressure crushing

899

Influence of common ions during ultrafiltration of mixtures: Part I. Common anions mixtures

900

Influence of common lambsquarters (Chenopodium album) densities and phosphorus fertilization on lettuce

901

Influence of common variants in the CETP, LPL, HL and APO E genes on LDL heterogeneity in healthy, middle-aged men

902

Influence of Communication Skills on Marital Satisfaction and Life Quality among Mothers of Girls High School Students

903

Influence of community design on user behaviors in online communities

904

Influence of comonomer content and short branch length on the physical properties of metallocene propylene copolymers

905

Influence of co-morbidity on cost of care for heart failure

906

Influence of compaction on the interfacial transition zone and the permeability of concrete

907

Influence of compartmental localization on the function of yeast NADP+-specific isocitrate dehydrogenases

908

Influence of compatibilization on the mechanical behavior of poly(trimethylene terephthalate)/poly(ethylene–octene) blends

909

Influence of compatibilizer and processing conditions on the dispersion of nanoclay in a polypropylene matrix

910

Influence of competition by sown grass, disturbance and litter on recruitment of rare flood-meadow species Original Research Article

911

Influence of competitors on caching behaviour in the common raven,Corvus corax

912

Influence of complemented subgroups on the structure of finite groups

913

Influence of complex defect on cast AS7G06-T6 under multiaxial fatigue loading

914

Influence of complex pollution from oil shale processing on xenobiotic metabolism of caged and feral fish

915

Influence of complex reagents on removal of chromium(VI) by zero-valent iron Original Research Article

916

Influence of complexation phenomena with multivalent cations on the analysis of glyphosate and aminomethyl phosphonic acid in water

917

Influence of complexing agent on the electrodeposited Co–Pt–W magnetic thin films

918

Influence of complexing agents on texture formation of electrodeposited copper

919

Influence of complexing agents on the adsorption of molybdate and nickel ions on alumina Original Research Article

920

Influence of complexing agents on the removal of metals from water by a cation exchanger

921

Influence of complexing carboxymethylcellulose on the thermostability and gelation of α-lactalbumin and β-lactoglobulin

922

Influence of compliance of the substrate materials on polymerization contraction stress in thin resin composite layers

923

Influence of compliant walls on peristaltic motion with heat/mass transfer and chemical reaction

924

Influence of component content on the capacitance of magnetite/reduced graphene oxide composite

925

Influence of component crop densities and planting patterns on maize production in dry land maize/cowpea intercropping systems

926

Influence of component positioning on impingement in conventional total shoulder arthroplasty

927

Influence of composite electrical properties on the VHF–UHF electromagnetic shielding characteristics of polyethylene–carbon nanoparticle composites

928

Influence of composition and acid treatment on proton conduction of composite polybenzimidazole membranes

929

Influence of composition and annealing on the structure development in biaxially stretched PEN/PEI/PEEK ternary blends

930

Influence of composition and cooling rate on constrained and unconstrained lattice parameters in advanced polycrystalline nickel–base superalloys

931

Influence of composition and Cu impregnation method on the performance of Cu/CeO2/YSZ SOFC anodes

932

Influence of composition and microstructure on the corrosion behavior of different Fe–Cr–Al alloys in molten LBE

933

Influence of composition and partial crystallization on corrosion resistance of amorphous Fe–M–B–Cu (M=Zr, Nb, Mo) alloys

934

Influence of composition and preparation conditions on some physical properties of TeO2–Sb2O3–PbCl2 Glasses

935

Influence of composition and preparation method on the activity of MnOx/Al2O3 catalysts for the reduction of benzaldehyde with ethanol Original Research Article

936

Influence of composition and process parameters on the thermal spray deposition of UHMWPE coatings

937

Influence Of Composition and Sintering Temperature on Density for Pure and Titanium Alloy Foams

938

Influence of composition and structural properties in the tribological behaviour of magnetron sputtered Ti–Si–C nanostructured thin films, prepared at low temperature

939

Influence of composition and thermal history of volcanic glasses on water content as determined by micro-Raman spectrometry

940

Influence of composition and thermal treatment on the properties of Cu2+xTa4O12+δ

941

Influence of composition in the crystallization process of Fe75−xNb10B15+x metallic glasses

942

Influence of composition modification on Ca0.5−xMgxTi2(PO4)3 (0.0 ≤ x ≤ 0.5) nanoparticles as electrodes for lithium batteries

943

Influence of composition of MgAl2O4 supported NiCeO2ZrO2 catalysts on coke formation and catalyst stability for dry reforming of methane

944

Influence of composition on mechanical behaviour of porcelain tile. Part I: Microstructural characterization and developed phases after firing

945

Influence of composition on mechanical behaviour of porcelain tile. Part II: Mechanical properties and microscopic residual stress

946

Influence of composition on mechanical behaviour of porcelain tile. Part III: Effect of the cooling rate of the firing cycle

947

Influence of composition on microstructural parameters of single crystal nickel-base superalloys

948

Influence of Composition on Properties of BNT-BT Lead-Free Piezoceramics

949

Influence of Composition on Properties of Medium Temperature Sintering (Ba, Sr)TiO3 Series Capacitor Ceramics

950

Influence of composition on setting kinetics of new injectable and/or fast setting tricalcium silicate cements

951

Influence of composition on some industrially relevant properties of traditional sanitary-ware glaze

952

Influence of composition on the biomethanation potential of restaurant waste at mesophilic temperatures

953

Influence of composition on the linear viscoelastic behavior and morphology of PP/HDPE blends

954

Influence of composition on the morphology of polyurethane/acrylic latex particles and adhesive films

955

Influence of composition on the photorefractive centers in pure LiNbO3 at low light intensity

956

Influence of composition on the structure and conductivity of the fast ionic conductors La2/3−xLi3xTiO3 (0.03≤x≤0.167)

957

Influence of composition variations on the initial alteration rate of vitrified domestic waste incineration fly-ash

958

Influence of composition, structure and testing atmosphere on the tribological performance of W–S–N coatings

959

Influence of compositional gradient on the phase behavior of ternary symmetric homopolymer–copolymer blends: A Monte Carlo study

960

Influence of compositional macrosteps on the reduction of the critical thickness by generation of 〈010〉 misfit dislocations in InGaAs/GaAs quantum wells

961

Influence of compositional ratio on microstructure and martensitic transformation of CuZr shape memory alloys

962

Influence of compositional stratification on autoignition in n-heptane/air mixtures

963

Influence of compositions on sealing temperature and properties of lead borate non-crystallizing sealing glasses

964

Influence of compost amendment on microbial community and ecotoxicity of hydrocarbon-contaminated soils

965

Influence of compost amendment on pyrene availability from artificially spiked soil to two subspecies of Cucurbita pepo

966

Influence of Compost and Biofertilizer on yield and essential oil of dill (Anethum graveolens L.)

967

Influence of Compost and Biofertilizer on yield and essential oil of dill (Anethum graveolens L.)

968

Influence of compost and canal clay scouring on sandy soil properties and wheat productivity under Irrigation water regime

969

Influence of Compost and Rock Amendments on Growth and Active Ingredients ofSafflower (Carthamus tinctorius L.).

970

Influence of compost on soil organic matter quality under tropical conditions

971

Influence of compost supplemented with jatropha cake on soil fertility, growth, and yield of maize (zea mays L.) in a degraded soil of Ilorin, Nigeria

972

INFLUENCE OF COMPOST, N-MINERAL an‎d HUMIC ACID ON YIELD an‎d CHMICAL COMPOSITION OF WHEAT PLANTS

973

Influence of composted green waste on the population dynamics and dispersal of grapevine phylloxera Daktulosphaira vitifoliae

974

Influence of composting and thermal processing on the survival of microbial pathogens and nutritional status of Nigeria sewage sludge

975

Influence of composting conditions on gaseous emission and compost quality during composting of cow manure and wheat straw

976

Influence of Compounding Methods on Poly(vinyl) Alcohol/Sago Pith Waste Biocomposites: Mechanical and Water Absorption Properties

977

Influence of compressed fluids treatment on the activity of Yarrowia lipolytica lipase

978

INFLUENCE OF COMPRESSION DEGREE AND INOCULATION ON CHEMICAL COMPOSITION AND SILAGE QUALITY OF DIFFERENT MAIZE HYBRIDS

979

Influence of compression on 3D face recognition

980

Influence of compressive cyclic loading on crack propagation in AM60B magnesium alloy under random and constant amplitude cyclic loadings

981

Influence of compressive plastic zone at the crack tip upon fatigue crack propagation

982

Influence of compressive strength and applied force in concrete on particles exposure concentrations during cutting processes Original Research Article

983

Influence of compressive stress on stress intensity factor of hole-edge crack by high strain rate laser shock processing

984

Influence of compressive stress on the pore structure of carbon cloth based gas diffusion layer investigated by capillary flow porometry

985

Influence of compressor oil admixtures on theoretical efficiency of a compressor system

986

Influence of computational domain boundaries on internal structure in low-porosity sphere packings

987

Influence of concentration and application time of maleic acid on dentin permeability

988

Influence of concentration and ionic strength on the adsorption kinetics of gelatin at the air/water interface

989

Influence of concentration and order of aggregation of the active phases in V–Mo–O catalysts in the oxidative dehydrogenation of propane

990

Influence of concentration and pH in caseinomacropeptide and carboxymethylcellulose interaction

991

Influence of concentration and sintering temperature on luminescence properties of Eu3+:SnO2 nanocrystallites

992

Influence of concentration and temperature on the corrosion behavior of titanium, titanium-20 and 40% tantalum alloys and tantalum in sulfuric acid solutions

993

Influence of Concentration of Copper Electrolyte, Voltage, and Time of Electroforming on Conductive Acrylonitrile Butadiene Styrene Parts on Deposition Rate and Microstructure

994

Influence of concentration of FeCl3 solution on properties of polypyrrole–Fe3O4 composites prepared by common ion absorption effect

995

INFLUENCE OF CONCENTRATION OF MODIFIED MAIZE STARCH ON COMPACTION CHARACTERISTICS AND MECHANICAL PROPERTIES OF PARACETAMOL TABLET FORMULATIONS

996

Influence of concentration of substances used in ultrasonic cleaning in alkaline solutions on cavitation intensity

997

Influence of concentration of substances used in ultrasonic cleaning in alkaline solutions on cavitation intensity

998

Influence of concentration polarization on flux behavior in forward osmosis during desalination using ammonium bicarbonate Original Research Article

999

Influence of concentration, ionic strength and pH on zeta potential and mean hydrodynamic diameter of edible polysaccharide solutions envisaged for multinanolayered films production

1000

Influence of concentrative and dilutive internal concentration polarization on flux behavior in forward osmosis

بازگشت