<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Optimization of a microwave-assisted extraction method for the analysis of polycyclic aromatic hydrocarbons from fish samples
2
Optimization of a microwave-assisted extraction of secondary metabolites from crustose lichens with quantitative spectrophotodensitometry analysis
3
Optimization of a microwave-pseudo-digestion procedure by experimental designs for the determination of trace elements in seafood products by atomic absorption spectrometry
4
Optimization of a mini-gamma camera based on a 2×2 array of Hamamatsu H8500 PSPMTs
5
Optimization of a mini-gamma camera based on a 2×2 array of Hamamatsu H8500 PSPMTs
6
Optimization of a model of red blood cells for the study of anti-oxidant drugs, in terms of concentration of oxidant and phosphate buffer
7
Optimization of a moderator-neutron guide system for diffractometers of beam line 7A of the IBR-2M reactor
8
Optimization of a moderator-neutron guide system for diffractometers of beam line 7A of the IBR-2M reactor
9
Optimization of a modified aerospray deposition device for the preparation of samples for quantitative analysis by MALDI-TOFMS Original Research Article
10
Optimization of a Modified GS Medium for a Probiotic Strain (L. acidophilus ATCC4356)
11
Optimization of a Monte Carlo variance reduction method based on sensitivity derivatives
12
Optimization of a Multi Gravity Separator to produce clean coal from Turkish lignite fine coal tailings
13
Optimization of a multi-channel parabolic guide for the material science diffractometer STRESS-SPEC at FRM II
14
Optimization of a multi-channel parabolic guide for the material science diffractometer STRESS-SPEC at FRM II
15
Optimization of a multi-Constant Work-in-Process semiconductor assembly and test factory based on performance evaluation
16
Optimization of a multi-elemental preconcentration procedure for the monitoring survey of dissolved metal species in natural waters Original Research Article
17
Optimization of a Multi-Item Inventory Model Considering Partial Backordering and Imperfect Products Using Interior-Point, SA and WCA
18
Optimization of a multinozzle ink-jet printer Original Research Article
19
Optimization of a multi-product EPQ model with scrap and an improved multi-delivery policy
20
Optimization of a multi-response problem in Taguchiʹs dynamic system
21
Optimization of a multitarget preservation technique for jackfruit (Artocarpus heterophyllus L.) bulbs Original Research Article
22
Optimization of a nanofiltration membrane process for tomato industry wastewater effluent treatment Original Research Article
23
Optimization of a natural circulation two phase closed thermosyphon flat plate solar water heater
24
Optimization of a natural gas SI engine employing EGR strategy using a two-zone combustion model
25
Optimization of a neutron image plate detector with low γ-sensitivity
26
Optimization of a neutron image plate detector with low γ-sensitivity
27
Optimization of a new catalyst composition for trimerization of ethylene
28
Optimization of a new cloud point extraction procedure for the selective determination of trace amounts of total iron in some environmental samples
29
OPTIMIZATION OF A NEW CONFIGURATION OF POWER TRI-GENERATION CYCLE BY THE USE OF A MULTI-PURPOSE GENETIC ALGORITHM
30
Optimization of a New Extended Cascaded Multilevel Inverter Topology to Reduce DC Voltage Sources and Power Electronic Components
31
Optimization of a New GaN-Based Blue Laser Diode with a Quadruple Asymmetric Waveguide for High Efficiency Performance
32
Optimization of a new mathematical model for bacterial growth
33
Optimization of a new mobile phase to know the complex and real polyphenolic composition: towards a total phenolic index using high-performance liquid chromatography
34
Optimization of a new polymeric chromium (III) membrane electrode based on methyl violet by using experimental design
35
Optimization of a New Technique in Mass-Rearing of Insects Used in Biological Control of Important Pests
36
Optimization of a nitrogen analyser based on the Dumas method
37
Optimization of a nitrogen analyser based on the Dumas method Original Research Article
38
Optimization of a non-cryogenic quantum infrared detector
39
Optimization of a nonlinear area traffic control system with elastic demand
40
Optimization of a non-linear dynamical system for global climate change
41
Optimization of a novel bioerodible device based on auto-catalyzed poly(ortho esters) for controlled delivery of tetracycline to periodontal pocket
42
Optimization of a novel carbon dioxide cogeneration system using artificial neural network and multi-objective genetic algorithm
43
Optimization of a novel method based on solidification of floating organic droplet by high-performance liquid chromatography for evaluation of antifungal drugs in biological samples
44
Optimization of a novel method for determination of benzene, toluene, ethylbenzene, and xylenes in hair and waste water samples by carbon nanotubes reinforced sol–gel based hollow fiber solid phase microextraction and gas chromatography using factorial ex
45
Optimization of a novel method for the organic chemical characterization of atmospheric aerosols based on microwave-assisted extraction combined with stir bar sorptive extraction Original Research Article
46
Optimization of a Novel Setup for an On-Line Study of Elemental Mercury Adsorption by Cold-Vapor Atomic Absorption Spectrometry
47
Optimization of a NOx gas sensor based on single walled carbon nanotubes
48
Optimization of a one dimensional hypertelescope for a direct imaging in astronomy
49
Optimization of a packet video receiver under different levels of delay jitter: an analytical approach
50
Optimization of a partially segmented block detector for MR-compatible small animal PET
51
Optimization of a partially segmented block detector for MR-compatible small animal PET
52
Optimization of a particle optical system in a mutilprocessor environment
53
Optimization of a particle optical system in a mutilprocessor environment
54
Optimization of a passive harmonic filter based on the neural-genetic algorithm with fuzzy logic for a steel manufacturing plant
55
Optimization of a passive vibration absorber for a barrel using the genetic algorithm
56
Optimization of a Pb2+-Directed Gold Nanoparticle/DNAzyme Assembly and Its Application as a Colorimetric Biosensor for Pb2+
57
Optimization of a PCR Method for Detection of Lipase Gene in Bacillus subtilis
58
Optimization of a Pd-catalyzed intramolecular α-arylation synthesis of tricyclo-[7.3.1.02,7]-trideca-2,4,6-trien-13-ones
59
Optimization of a pebble bed configuration for quasi-direct numerical simulation
60
Optimization of a peer-to-peer system for efficient content replication
61
Optimization of a PEM fuel cell system based on empirical data and a generalized electrochemical semi-empirical model
62
Optimization of a PEMFC/battery pack power system for a bus application
63
Optimization of a periodic biological process for nitrogen removal from wastewater
64
Optimization of a pharmaceutical freeze-dried product and its process using an experimental design approach and innovative process analyzers
65
Optimization of a phase change material wallboard for building use
66
Optimization of a phase separation based magnetic-stirring salt-induced liquid–liquid microextraction method for determination of fluoroquinolones in food
67
Optimization of a photo-fenton prototype reactor
68
Optimization of a photovoltaic pumping system based on the optimal control theory
69
Optimization of a physical concentration process for inulin Original Research Article
70
Optimization of a piezoelectric linear motor in terms of the contact parameters
71
Optimization of a portable microanalytical system to reduce electrode fouling from proteins associated with biomonitoring of lead (Pb) in saliva
72
Optimization of a preparative capillary gas chromatography–mass spectrometry system for the isolation and harvesting of individual polycyclic aromatic hydrocarbons
73
Optimization of a pressurization methodology for extracting pore-water
74
Optimization of a pressurized liquid extraction method by experimental design methodologies for the determination of fluoroquinolone residues in infant foods by liquid chromatography
75
Optimization of a privileged structure leading to potent and selective human melanocortin subtype-4 receptor ligands
76
Optimization of a procedure for the selective isolation of some powerful aroma thiols: Development and validation of a quantitative method for their determination in wine
77
Optimization of a procedure to accurately detect equine TNFα in serum samples
78
Optimization of a procedure to accurately detect equine TNFα in serum samples
79
Optimization of a product performance using mixture experiments
80
Optimization of a product performance using mixture experiments including process variables
81
OPTIMIZATION OF A PRODUCTION LOT SIZING PROBLEM WITH QUANTITY DISCOUNT
82
Optimization of a Pt-free cathode suitable for practical applications of microbial fuel cells
83
Optimization of a pyrazolo[1,5-a]pyrimidine class of KDR kinase inhibitors: improvements in physical properties enhance cellular activity and pharmacokinetics
84
Optimization of a pyrazoloquinolinone class of Chk1 kinase inhibitors
85
Optimization of a quarter-car suspension model coupled with the driver biomechanical effects
86
Optimization of a radially cooled pebble bed reactor Original Research Article
87
Optimization of a railway wheel profile to minimize flange wear and surface fatigue
88
Optimization of a rapid dot-blot immunoassay for detection of Salmonella enterica serovar Enteritidis in poultry products and environmental samples Original Research Article
89
Optimization of a rapid microwave assisted extraction method for the liquid chromatography–electrospray-tandem mass spectrometry determination of isoflavonoid aglycones in soybeans
90
Optimization of a rapid microwave-assisted extraction method for the simultaneous determination of opiates, cocaine and their metabolites in human hair
91
Optimization of a Real Time PCR based method for the detection of Listeria monocytogenes in pork meat
92
Optimization of a Reference Electrode with Constrained Liquid Junction for the Measurements of Ions
93
Optimization of a Reference Electrode with Constrained Liquid Junction for the Measurements of Ions
94
Optimization of a regenerative Brayton cycle by maximization of a newly defined second law efficiency
95
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm
96
Optimization of a reversed-phase high-performance liquid chromatography/mass spectrometry method for characterizing recombinant antibody heterogeneity and stability
97
Optimization of a reversed-phase-high-performance thin-layer chromatography method for the separation of isoniazid, ethambutol, rifampicin and pyrazinamide in fixed-dose combination antituberculosis tablets
98
Optimization of a rotating flexible arm with ACLD treatment
99
Optimization of a sample preparation method for multiresidue analysis of pesticides in tobacco by single and multi-dimensional gas chromatography-mass spectrometry
100
Optimization of a sampling method to determine polycyclic aromatic hydrocarbons in smoke from incomplete biomass combustion
101
Optimization of a sampling method to determine polycyclic aromatic hydrocarbons in smoke from incomplete biomass combustion Original Research Article
102
Optimization of a scintillator-deposited charge-coupled device with Monte-Carlo simulation
103
Optimization of a scintillator-deposited charge-coupled device with Monte-Carlo simulation
104
Optimization of a screening lead for factor VIIa/TF
105
Optimization of a scroll compressor for liquid flooding
106
Optimization of a sealed-off CO2 laser resonator by utilizing a genetic algorithm
107
Optimization of a seeding option for the VUV free electron laser at DESY
108
Optimization of a seeding option for the VUV free electron laser at DESY
109
Optimization of a self-driven current-doubler phase shifted full bridge DC-DC converter with integrated magnetic
110
Optimization of a Self-microemulsifying Drug Delivery System for Oral Administration of the Lipophilic Drug, Resveratrol: Enhanced Intestinal Permeability in Rat
111
Optimization of a sensible heat cascade energy storage by lumped model
112
Optimization of a sequencing batch reactor for biological nitrogen removal
113
Optimization of a series of multi-isoform PI3 kinase inhibitors
114
Optimization of a series of potent and selective ketone histone deacetylase inhibitors
115
Optimization of a simple X-ray diffraction instrument for portable and planetary applications
116
Optimization of a simple X-ray diffraction instrument for portable and planetary applications
117
Optimization of a simplified sub-model for NO emission prediction by CFD in large 4-stroke marine diesel engines
118
Optimization of a single TiO2-coated optical fiber reactor using experimental design
119
Optimization of a single-chain antibody fragment overexpression in Escherichia coli using response surface methodology
120
Optimization of a single-drop microextraction method for multielemental determination by electrothermal vaporization inductively coupled plasma mass spectrometry following in situ vapor generation
121
Optimization of a single-drop microextraction method for multielemental determination by electrothermal vaporization inductively coupled plasma mass spectrometry following in situ vapor generation
122
Optimization of a single-drop microextraction procedure for the determination of organophosphorus pesticides in water and fruit juice with gas chromatography-flame photometric detection
123
Optimization of a slurry dispersion method for minerals and trace elements analysis in infant formulae by ICP OES and FAAS
124
Optimization of a small intestinal segment perfusion model for heat-stable enterotoxin A induced secretion in pigs
125
Optimization of a small intestinal segment perfusion model for heat-stable enterotoxin A induced secretion in pigs
126
OPTIMIZATION OF A SMALL SCALE CONCENTRATED SOLAR POWER PLANT USING RANKINE CYCLE
127
Optimization of a smooth flat plate solar air heater using stochastic iterative perturbation technique
128
Optimization of a solar cooling system with interior energy storage
129
Optimization of a solar driven absorption refrigerator in the transient regime
130
Optimization of a solar driven adsorption refrigeration system
131
Optimization of a solar hydrogen storage system: Exergetic considerations
132
Optimization of a Solar Photovoltaic, Biomass Gasifier and Fuel Cell Hybrid System
133
Optimization of a solar powered absorption cycle under Abu Dhabi’s weather conditions
134
Optimization of a solar-assisted drying system for drying bananas
135
Optimization of a solar-powered adsorptive ice-maker by a mathematical method
136
Optimization of a solid phase extraction and hydrophilic interaction liquid chromatography–tandem mass spectrometry method for the determination of metformin in dietary supplements and herbal medicines
137
Optimization of a solid state polarizing bender for cold neutrons
138
Optimization of a solid state polarizing bender for cold neutrons
139
Optimization of a solid-phase extraction method for determination of indapamide in biological fluids using high-performance liquid chromatography
140
Optimization of a solution-chemically derived solar absorbing spectrally selective surface
141
Optimization of a somatostatin mimetic via constrained amino acid and backbone incorporation
142
Optimization of a space based radiator
143
Optimization of a space radiator with energy storage
144
Optimization of a special case of continuous-time Markov decision processes with compact action set
145
Optimization of a stabilized X-FEM formulation for frictional cracks
146
Optimization of a Sustainable Keratin Extraction Process from Waste Slaughterhouse Feathers: A Practice and Business Model Innovation
147
Optimization of a synthetic jet actuator for aerodynamic stall control
148
Optimization of a table-top Compton camera system by Monte Carlo simulation
149
Optimization of a table-top Compton camera system by Monte Carlo simulation
150
Optimization of a temperature gradient-based oil spillage remediation system
151
Optimization of A Thermal Coupled Flow Problem of Semiconductor Melts
152
Optimization of a thermal manufacturing process: Drawing of optical fibers
153
Optimization of a thermal storage unit combined with a biomass boiler for heating buildings
154
Optimization of a thermal-CVD system for carbon nanotube growth
155
Optimization of a thermoelectric generator subsystem for high temperature PEM fuel cell exhaust heat recovery
156
Optimization of a thermoelectric system for power generation realized by “hidden” components
157
Optimization of a thin film deposition process using a dynamic model extracted from molecular simulations
158
Optimization of a thin layer drying process for coroba slices Original Research Article
159
Optimization of a tissue-equivalent CVD-diamond dosimeter for radiotherapy using the Monte Carlo code PENELOPE
160
Optimization of a tissue-equivalent CVD-diamond dosimeter for radiotherapy using the Monte Carlo code PENELOPE
161
Optimization of a transcritical CO2 heat pump cycle for simultaneous cooling and heating applications
162
Optimization of a trypsin-bioreactor coupled with high-performance liquid chromatography–electrospray ionization tandem mass spectrometry for quality control of biotechnological drugs
163
Optimization of a two-compartment photoelectrochemical cell for solar hydrogen production
164
Optimization of a two-stage combined refrigeration system
165
Optimization of a variable-angle spherical grating monochromator
166
Optimization of a variable-angle spherical grating monochromator
167
Optimization of a wafer-level process for the fabrication of highly reproducible thin-film MOX sensors
168
Optimization of a waste heat utilization network in an eco-industrial park
169
Optimization of a Waterborne Epoxy Coatings Formulation via Experimental Design
170
Optimization of a water-cooled divertor for the European power plant conceptual study
171
Optimization of a water–gas shift reactor over a Pt/ceria/alumina monolith
172
Optimization of a wet chemistry method for fabrication of Li2TiO3 pebbles
173
Optimization of a wickless heat pipe flat plate solar collector
174
Optimization of a Wideband Tapped-Delay Line Array Antenna
175
Optimization of a wind-power fuel-cell hybrid system in an autonomous electrical network environment
176
Optimization of a wing structure for gust response and aileron effectiveness
177
Optimization of a Wolter type I mirror for a soft X-ray microscope
178
Optimization of a wood-waste-fuelled, indirectly fired gas turbine cogeneration plant
179
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique
180
Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet
181
Optimization of ABTS radical cation assay specifically for determination of antioxidant capacity of intracellular extracts of microalgae and cyanobacteria
182
Optimization of Accelerated Solvent Extraction for Polyhalogenated Dibenzo-p-Dioxins and Benzo-p-furans in Mineral and Environmental Matrixes Using Experimental Designs
183
Optimization of accelerated solvent extraction of antioxidants from Spirulina platensis microalga
184
Optimization of acetic acid production from synthesis gas by chemolithotrophic bacterium – Clostridium aceticum using statistical approach
185
Optimization of Acid Black 172 decolorization by electrocoagulation using response surface methodology
186
Optimization of acid hydrolysis conditions for total isoflavones analysis in soybean hypocotyls by using RSM
187
Optimization of acid hydrolysis from the hemicellulosic fraction of Eucalyptus grandis residue using response surface methodology
188
Optimization of acid hydrolysis of olive tree pruning residue. Fermentation with Candida guilliermondii
189
Optimization of acoustic performance of EPDM-based foams using Taguchi design of experiments: Appropriate content of additives
190
Optimization of acquisition energy windows in simultaneous /sup 99m/Tc//sup 123/I brain SPECT
191
Optimization of Acrylic Acid Grafting onto POSS-PCU Nanocomposite Using Response Surface Methodology
192
Optimization of activated carbon fiber preparation from Kenaf using K2HPO4 as chemical activator for adsorption of phenolic compounds
193
Optimization of Activated Carbon Preparation from Peach Stone
194
Optimization of Activated Carbon Preparation from Peach Stone
195
Optimization of activated carbons for hydrogen storage
196
Optimization of activated sludge reactor configuration: : kinetic considerations
197
Optimization of activity coefficient models to describe vapor–liquid equilibrium of (alcohol + water) mixtures using a particle swarm algorithm
198
Optimization of adaptive direct algorithms for approximate solution of integral equation ✩
199
Optimization of Adaptive Neuro-Fuzzy Inference System using Differential Evolution Algorithm for Scour Prediction around Submerged Pipes
200
Optimization of adding konjac glucomannan to improve gel properties of low-quality surimi
201
Optimization of adenovirus-mediated gene transfer to cardiac myocytes in vivo: Mechanical or pharmacological procedures?
202
Optimization of adhesion mode atomic force microscopy resolves individual molecules in topography and adhesion
203
Optimization of adhesion mode atomic force microscopy resolves individual molecules in topography and adhesion
204
Optimization of adsorption conditions of BSA on thermosensitive magnetic composite particles using response surface methodology
205
Optimization of adsorption conditions of papain on dye affinity membrane using response surface methodology
206
Optimization of Adsorption Parameters Using Central Composite Design for the Removal of Organosulfur in Diesel Fuel by Bentonite-Supported Nanoscale NiO-WO3
207
Optimization of adsorption removal of ethylene glycol from wastewater using granular activated carbon by response surface methodology
208
Optimization of adsorptive desulfurization process of jet fuels for application in fuel cell systems
209
Optimization of Advanced Square Wave AC-GTAW Parameters to Improve Localized Corrosion Resistance of AA6082-T651 Aluminum Welds
210
Optimization of Aeration for Improving Performance of Hospital Wastewater Treatment Plant
211
Optimization of aerodynamic efficiency for twist morphing MAV wing
212
Optimization of aerosol dispersion measurements model by screen diffusion batteries
213
Optimization of AFEX™ pretreatment conditions and enzyme mixtures to maximize sugar release from upland and lowland switchgrass
214
Optimization of Affective Parameter on Cadmium Removal From an Aqueous Solution by Citrullus colocynthis Powdered Fruits by Response Surface
215
Optimization of Affinity Chromatography Based on Sepharose 4Bchitin for Rapid Purification of Urtica dioica Agglutinin
216
Optimization of Ag loaded TiO2 nanotube arrays for plasmonic photoelectrochemical water splitting
217
Optimization of agitation, aeration, and temperature conditions for maximum β-mannanase production
218
Optimization of Agricultural BMPs Using a Parallel ComputingBased Multi-Objective Optimization Algorithm
219
Optimization of agriculture in relation to the multifunctional role of the landscape
220
Optimization of Agrobacterial (Agrobacterium tumefaciens) Transformation of Maize Embryogenic Callus
221
Optimization of Agrobacterium-mediated transformation in oyster mushroom (Pleurotus ostreatus) by vector containing human pro-insulin gene
222
Optimization of Air Distribution Patterns by Arrangements of Air Inlets and Outlets: Case Study of an Operating Room
223
Optimization of air staging in a 1 MW tangentially fired pulverized coal furnace
224
Optimization of air/water cleaning (AWC) in spiral wound elements Original Research Article
225
Optimization of airbag inflation parameters for the minimization of out of position occupant injury
226
Optimization of air-conditioning system operating strategies for hot and humid climates
227
Optimization of aircraft container loading
228
Optimization of alarm threshold and sequential inspection scheme
229
Optimization of alarm threshold and sequential inspection scheme
230
Optimization of alcohol insoluble polysaccharides (AIPS) extraction from the Parkia speciosa pod using response surface methodology (RSM)
231
Optimization of alcohol insoluble polysaccharides (AIPS) extraction from the Parkia speciosa pod using response surface methodology (RSM)
232
Optimization of algal removal process at Morton Jaffray water works, Harare, Zimbabwe
233
Optimization of alginate and gellan-based edible coating formulations for fresh-cut pineapples
234
Optimization of alignment in semiconductor lithography equipment
235
Optimization of alkali-catalyzed transesterification of Pongamia pinnata oil for production of biodiesel
236
Optimization of alkali-extrusion pretreatment with twin-screw for bioethanol production from Miscanthus
237
Optimization of alkaline extraction of natural dye from Henna leaves and its dyeing on cotton by exhaust method
238
Optimization of alkaline phosphatase gene expression in E. coli
239
Optimization of alkaline pretreatment conditions for enhancing glucose yield of rice straw by response surface methodology
240
Optimization of alkaline protease production by batch culture of Bacillus sp. RKY3 through Plackett–Burman and response surface methodological approaches
241
OPTIMIZATION OF ALKALINE PROTEASE PRODUCTION FROM A LOCALLY ISOLATED BACILLUS SP. ZR-5: POTENTIAL APPLICATION AS A DETERGENT ADDITIVE
242
Optimization of alkaline protease productivity by Bacillus licheniformis ATCC 21415
243
Optimization of Allium sativum Solvent Extraction for the Inhibition of in Vitro Growth of Helicobacter Pylori
244
Optimization of Almond Kernels Drying under Infrared-vacuum Condition with Microwave Pretreatment using Response Surface Method and Genetic Algorithm
245
Optimization of alternative options for SO2 emissions control in the Mexican electrical sector
246
Optimization of alternative structures of integrated power and desalination plants Original Research Article
247
Optimization of alum-coagulation/flocculation for COD and TSS removal from five municipal wastewater Original Research Article
248
Optimization of Aluminum Smelter Casthouse Operations
249
Optimization of aluminum-doped zinc oxide films deposited at low temperature by radio-frequency sputtering on flexible substrates for solar cell applications
250
Optimization of ammonia production from urea in continuous process using ASPEN Plus and computational fluid dynamics study of the reactor used for hydrolysis process
251
Optimization of ammonia removal in an integrated fix-film activated sludge using response surface methodology
252
Optimization of amperometric microsensors for monitoring choline in the extracellular fluid of brain tissue
253
Optimization of amplitude-modulated inverse filter
254
Optimization of amylase production from Bacillus sp. using statistics based experimental design
255
Optimization of an “in situ” subtidal rocky-shore sampling strategy for monitoring purposes
256
Optimization of an accelerator-based epithermal neutron source for neutron capture therapy
257
Optimization of an acoustic rectifier for uni-directional wave propagation in periodic mass–spring lattices
258
Optimization of an activated sludge process equipped with a diffused aeration system: Investigating the diffuser density sensitivity
259
Optimization of an active anti cosmic veto shielding
260
Optimization of an Active Electrokinetic Micromixer Based on the Number and Arrangement of Microelectrodes
261
Optimization of an air cushion vehicle bag and finger skirt using genetic algorithms
262
Optimization of an air-cooling system and its application to grid stability
263
Optimization of an Aircraft Power Distribution Subsystem
264
Optimization of an aluminum alloy anti-collision side beam hot stamping process using a multi-objective genetic algorithm
265
Optimization of an amorphous silicon mask PECVD process for deep wet etching of Pyrex glass
266
Optimization of an analytical method for determining organotin compounds in fish tissue by base-hydrolysis pretreatment and simultaneous ethylation–extraction procedures Original Research Article
267
Optimization of an anion-exchange high performance liquid chromatography-inductively coupled plasma-mass spectrometric method for the speciation analysis of oxyanion-forming metals and metalloids in leachates from cement-based materials
268
Optimization of an aqueous, commercial silicon nitride slurry for colloidal isopressing
269
Optimization of an artificial neural network for identifying fishing set positions from VMS data: An example from the Peruvian anchovy purse seine fishery
270
Optimization of an artificial neural network for identifying fishing set positions from VMS data: An example from the Peruvian anchovy purse seine fishery
271
Optimization of an azo dye batch adsorption parameters using Box–Behnken design Original Research Article
272
Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method
273
Optimization of an ecofriendly dyeing process using the wastewater of the olive oil industry as natural dyes for acrylic fibres
274
Optimization of an effective extraction procedure for the analysis of microcystins in soils and lake sediments
275
Optimization of an electrochemical cell for NO decomposition by compositional control of the electro-catalytic electrode
276
Optimization of an electrolyte system for analysis of ethambutol in pharmaceutical formulations by capillary zone electrophoresis using complexation with copper(II)
277
Optimization of an electron beam remelting of HVOF sprayed alloys and carbides
278
Optimization of an electron cold cathode tube for soft X-ray spectrometry
279
Optimization of an energy based bi-objective multi-skilled resource investment project scheduling problem
280
Optimization of an energy based bi-objective multi-skilled resource investment project scheduling problem
281
Optimization of an energy based bi-objective multi-skilled resource investment project scheduling problem
282
Optimization of an enzyme assisted banana pulp clarification process
283
Optimization of an equilibrium modified atmosphere packaging (EMAP) for minimally processed mandarin segments Original Research Article
284
Optimization of an established multi-objective delivering problem by an improved hybrid algorithm
285
Optimization of an Estrogen Receptor-alpha Transcriptional Activation Assay for Testing a Diverse Spectrum of Chemicals
286
Optimization of an extraction method of aroma compounds in white wine using ultrasound
287
Optimization of an Extraction Procedure for the Quantification of Vitamin E in Tomato and Broccoli using Response Surface Methodology
288
Optimization of an Hough transform algorithm for the search of a center
289
Optimization of an HTS Induction/Synchronous Motor According to Changing of HTS Tapes Critical Current by Analytical Hierarchy Process
290
Optimization of an ice-storage air conditioning system using dynamic programming method
291
Optimization of an immunoassay of 2,6-dichlorobenzamide (BAM) and development of regenerative surfaces by immunosorbent modification with newly synthesised BAM hapten library Original Research Article
292
Optimization of an improved analytical method for the determination of 1-nitropyrene in milligram diesel soot samples by high-performance liquid chromatography–mass spectrometry
293
Optimization of an improved single-column chromatographic process for the separation of enantiomers
294
Optimization of an independent component analysis approach for artifact identification and removal in magnetoencephalographic signals
295
Optimization of an Industrial Aerobic Bioreactor Using Combined CFD, Scale-Down, and Experimental Techniques
296
Optimization of an industrial DC magnetron sputtering process for graded composition solar thermal absorbing layer
297
Optimization of an industrial heat exchanger using an open-source CFD code
298
Optimization of an inorganic/bio-organic matrix for the development of new glucose biosensor membranes
299
Optimization of an integrated gas turbine–geothermal power plant
300
Optimization of an Integrated Natural Gas to Polypropylene Plant Using Sinus-Cosine Algorithm
301
Optimization of an interlaboratory program for the certification of a multi-element plagiogneiss reference material
302
Optimization of an internationally distributed air–ground airline telecommunication system
303
Optimization of an inverted organic solar cell
304
Optimization of an in-vessel visible inspection system for a long-pulse operation in KSTAR
305
Optimization of an MRT Train Schedule: Reducing Maximum Traction Power by Using Genetic Algorithms.
306
Optimization of an off-axis nozzle for assist gas injection in laser fusion cutting
307
OPTIMIZATION OF AN OFFSHORE JACKET-TYPE STRUCTURE USING META-HEURISTIC ALGORITHMS
308
Optimization of an orthotopic murine model of head and neck squamous cell carcinoma in fully immunocompetent mice – Role of toll-like-receptor 4 expressed on host cells
309
Optimization of an oxygen-based approach for community-level physiological profiling of soils
310
Optimization of an oxygen-based approach for community-level physiological profiling of soils
311
Optimization of an SOFC-based decentralized polygeneration system for providing energy services in an office-building in Tōkyō
312
Optimization of an Unstructured First-Order Kinetics Model of Cyclically Operated Bioreactors
313
Optimization of an urea decomposition chamber using CFD and VR
314
Optimization of an X-ray SASE-FEL
315
Optimization of an X-ray SASE-FEL
316
Optimization of anaerobic acidogenesis of an aquatic plant, Canna indica L., by rumen cultures
317
Optimization of anaerobic digestion of a mixture of Zea mays and Miscanthus sacchariflorus silages with various pig manure dosages
318
Optimization of anaerobically digested distillery molasses spent wash decolorization using soil as inoculum in the absence of additional carbon and nitrogen source
319
Optimization of analogy weights by genetic algorithm for software effort estimation
320
Optimization of analytic density functionals by parallel genetic algorithm
321
Optimization of analytical methods for the determination of DBPs: Application to drinking waters from Greece and Italy Original Research Article
322
Optimization of analytical performance of a graphite furnace atomic absorption spectrometer with Zeeman-effect background correction using variable magnetic field strength
323
Optimization of analytical procedures for GC–MS determination of phytosterols and phytostanols in enriched milk and yoghurt
324
Optimization of androstenedione production in an organic–aqueous two-liquid phase system
325
Optimization of anemia treatment in hemodialysis patients via reinforcement learning
326
Optimization of ANFIS model using wavelet transform for simulating groundwater level variations
327
Optimization of angular resolution for air Cherenkov detector arrays for observations of EeVZeV cosmic rays
328
Optimization of angular resolution for air Cherenkov detector arrays for observations of EeVZeV cosmic rays
329
Optimization of angular setup with proposed β–η chart for solar energy apparatus through Helios orbital analysis
330
OPTIMIZATION OF ANISOTROPIC SANDWICH BEAMS FOR HIGHER SOUND TRANSMISSION LOSS
331
Optimization of anisotropically etched silicon surface-relief gratings for substrate-mode optical interconnects
332
Optimization of ankle stiffness using genetic algorithm in gait modeling
333
Optimization of Ankle-Foot Prosthesis with Active Alignment by Passive Elements
334
Optimization of annealing conditions of In2S3 thin films deposited by vacuum thermal evaporation
335
Optimization of Annealing Process for Totally Printable High-current Superstrate CuInS2 Thin-Film Solar Cells
336
Optimization of annealing treatment parameters in a twin roll cast and warm rolled ZK60 alloy sheet
337
Optimization of anodic layer properties on aluminium in mixed oxalic/sulphuric acid bath using statistical experimental methods
338
Optimization of anodic oxidation and Cu–Cr oxide catalyst preparation on structured aluminum plates processed by electro discharge machining
339
Optimization of Anodizing Parameters on Photo Decolorization of Textile Dye Solution Using N-Doped Titanium Nanotubes with Response Surface Methodology
340
Optimization of Anterior Eye Fluorecein Viewing Original Reearch Article
341
Optimization of antibiotic analysis in water by solid-phase extraction and high performance liquid chromatography–mass spectrometry/mass spectrometry Original Research Article
342
Optimization of antibody immobilization for sensing using piezoelectrically excited-millimeter-sized cantilever (PEMC) sensors
343
Optimization of antibody immobilization for sensing using piezoelectrically excited-millimeter-sized cantilever (PEMC) sensors
344
Optimization of anti-corrosion ability of micro-arc oxide coating on AZ91D alloy using experimental strategies
345
Optimization of antifungal extracts from Dracocephalum kotschyi using response surface methodology and evaluations of antifungal effects on Candida albicans
346
optimization of antimicrobial efficiency of silver nanoparticles against three oral microorganisms in irreversible hydrocolloid impressions
347
Optimization of antinutritional factors from germinated wheat and mungbean by Response Surface Methodology
348
Optimization of Antioxidant Activities and Intracellular Polysaccharide Contents Using Agaricus bisporus Extract as Elicitor in Submerged Fermenting Ganoderma lucidum
349
Optimization of antioxidant exopolysaccharidess production by Bacillus licheniformis in solid state fermentation
350
Optimization of antireflection coating for VO2-based energy efficient window
351
Optimization of Anti-Rh D Immunoglobulin Stability in the Lyophilization Processes
352
Optimization of Aortic Arch Replacement With a One-Stage Approach
353
Optimization of Aortic Arch Replacement: Two-Stage Approach
354
Optimization of aperture distributions for double-difference patterns
355
Optimization of apparent polar wander paths: An example from the South China plate
356
Optimization of aptamer microarray technology for multiple protein targets Original Research Article
357
Optimization of aquaculture systems in Spain
358
Optimization of aqueous acetylation for determination of hydroxy polycyclic aromatic hydrocarbons in water by stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry Original Research Article
359
Optimization of Aqueous and Alcoholic Extraction of Phenolic and Antioxidant Compounds From Caper (Capparis spinosa L.) Roots Assisted by Ultrasound Waves
360
Optimization of arachidonic acid production by fed-batch culture of Mortierella alpina based on dynamic analysis
361
Optimization of arbitrarily doped MINP+ solar cell performance
362
Optimization of architectural design elements in tropical humid region with thermal comfort approach
363
Optimization of armour geometry and bonding techniques for tungsten-armoured high heat flux components
364
Optimization of Aromatics Extraction of Naphtha Reformate by Propylene Carbonate/Diethylene Glycol Mixed Solvent
365
OPTIMIZATION OF ARSENITE ADSORPTION ON HYDROXY APATITE BASED ADSORBENT USING THE ADAPTIVE NEURO-FUZZY INFERENCE SYSTEM
366
Optimization of Artificial Neural Network (ANN) model design for prediction of macroinvertebrates in the Zwalm river basin (Flanders, Belgium)
367
Optimization of Artificial Neural Network (ANN) model design for prediction of macroinvertebrates in the Zwalm river basin (Flanders, Belgium)
368
Optimization of artificial neural network for retention modeling in high-performance liquid chromatography
369
Optimization of artificial neural networks for prediction of the unit cell parameters in orthorhombic perovskites. Comparison with multiple linear regression
370
Optimization of artificial neural networks used for retention modelling in ion chromatography
371
OPTIMIZATION OF ARTIFICIAL WETLAND DESIGN FOR REMOVAL OF INDICATOR MICROORGANISMS AND PATHOGENIC PROTOZOA
372
OPTIMIZATION OF ARTIFICIAL WETLAND DESIGN FOR REMOVAL OF INDICATOR MICROORGANISMS AND PATHOGENIC PROTOZOA
373
Optimization of As(V) adsorption on Fe-RH-MCM-41-immobilized GAC using Box–Behnken Design: Effects of pH, loadings, and initial concentrations
374
Optimization of astronaut landing position based on micro multi-objective genetic algorithms
375
Optimization of asymmetric spur gear drives to improve the bending load capacity
376
Optimization of ATM cash replenishment with group-demand forecasts
377
Optimization of Atrazine Degradation in the Aqueous Phase Using Titanium Catalyst Doped With Iron (Fe+3-TiO2) Processes
378
Optimization of Atropine Extraction Process from Atropa Belladonna by Modified Bubble Column Extractor with Ultrasonic Bath
379
Optimization of auditing strategies in companies listed on the Tehran Stock Exchange
380
Optimization of AuGe-Ni-Au ohmic contacts for GaAs MOSFETs
381
Optimization of Auto-induction Conditions for the Heterologous Expression of a Maltogenic Amylase in Escherichia coli
382
Optimization of autothermal reactor for maximum hydrogen production
383
Optimization of axisymmetric open-die micro-forging/extrusion processes: An upper bound approach
384
Optimization of axisymmetric open-die micro-forging/extrusion processes: An upper bound approach
385
Optimization of AZ61 Mg alloy resistance spot welding using response surface method
386
Optimization of azeotropic protein separations in gradient and isocratic ion-exchange simulated moving bed chromatography
387
Optimization of Azimuth Angle Settings in Polarizer-Compensator-Sample-Analyzer Off-Null Ellipsometry
388
Optimization of Bacillus intermedius glutamyl endopeptidase production by recombinant strain of Bacillus subtilis and localization of glutamyl endopeptidase in Bacillus subtilis cells
389
Optimization of backflushing conditions for ceramic ultrafiltration membrane of disperse dye solutions Original Research Article
390
Optimization of background electrolytes for capillary electrophoresis: I. Mathematical and computational model
391
Optimization of bacterial fatty acid methyl esters separation by gas chromatography - mass spectrometry
392
Optimization of Bacterial Nano-Cellulose Production in Bench-Scale Rotating Biological Contact Bioreactor by Response Surface Methodology
393
Optimization of bacteriorhodopsin for bioelectronic devices
394
Optimization of bakerʹs yeast wastewater using response surface methodology by electrocoagulation Original Research Article
395
Optimization of ball milling parameters to produce Centella asiatica herbal nanopowders
396
Optimization of BaMgAl10O17:Eu2+ phosphors by the substitution of Si-N bonds for Al-O bonds
397
Optimization of Bang-of-Bang TS-Fuzzy Based via DARLA Technique for ABS System
398
Optimization of Bank Portfolio Investment Decision Considering Resistive Economy
399
Optimization of Barbell Trajectory During The Snatch Lift Technique By Using Optimal Control Theory
400
Optimization of barium titanate nanopowder slip for tape casting
401
Optimization of barrel plating process for electroless Ni–P plating
402
Optimization of base-catalyzed ethanolysis of sunflower oil by regression and artificial neural network models
403
Optimization of basis functions for both reconstruction and visualization Original Research Article
404
Optimization of basis sets in valence bond calculations
405
Optimization of Batch and Fed-Batch Bioreactors using Simulated Annealing
406
Optimization of batch dilute-acid hydrolysis for biohydrogen production from red algal biomass
407
Optimization of batch electrodialysis for hydrochloric acid recovery using orthogonal collocation method Original Research Article
408
Optimization of batch process parameters using response surface methodology for dye removal by a novel adsorbent
409
Optimization of BaZr0.1Ce0.7Y0.2O3−δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO3−δ–Ce0.8Sm0.2O2−δ composite cathode
410
Optimization of BaZrO3 sintering by control of the initial powder size distribution; a factorial design statistical analysis
411
Optimization of b-carotene production fromagro-industrial by-products by Serratia marcescens ATCC 27117 using Plackett–Burman design and central composite design
412
Optimization of bead geometry in electron beam welding using a Genetic Algorithm
413
Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings
414
Optimization of beamforming and path planning for UAV-assisted wireless relay networks
415
Optimization of beamline diameter in spot scanning proton therapy for minimization of secondary particles using finite element method
416
Optimization of Beam-Shaping Assemblies for BNCS Using the High-Energy Neutron Sources D-D and D-T
417
Optimization of Bed Material Height in a Submerged Biological Aerated Filter
418
Optimization of bed parameters for packed bed solar energy collection system
419
Optimization of benzoin synthesis in supercritical carbon dioxide by response surface methodology (RSM)
420
Optimization of BF Slag for High Cr2O3 Vanadium-titanium Magnetite Original Research Article
421
Optimization of biaryl Selective HDAC1&2 Inhibitors (SHI-1:2)
422
Optimization of bimetallic dry reforming catalysts by temperature programmed reaction Original Research Article
423
Optimization of binary porogen solvent composition for preparation of butyl methacrylate monoliths in capillary liquid chromatography
424
Optimization of binder removal for ceramic microfabrication via polymer co-extrusion
425
Optimization of Bioactive Compound Extraction from Rose Myrtle Fruit (Rhodomyrtus tomentosa, (W.Ait), Myrtaceae) as the Antioxidant Source
426
Optimization of Bioactive Compounds Extraction from Platanus Orientalis Leaves using Microwave-Assisted Technique
427
Optimization of biobleaching of paper pulp in an expanded bed bioreactor with immobilized alkali stable xylanase by using response surface methodology
428
Optimization of biocatalytic biodiesel production from pomace oil using response surface methodology
429
Optimization of biocatalytic synthesis of Chitosan Ester using response surface methodology
430
Optimization of biochemical systems by linear programming and general mass action model representations
431
Optimization of Biodegradation of Long Chain n-Alkanes by Rhodococcus sp. Moj-3449 Using Response Surface Methodology
432
Optimization of biodiesel fueled engine to meet emission standards through varying nozzle opening pressure and static injection timing
433
Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine
434
Optimization of Biodiesel Production by Chemical Trans-esterification of Sunflower Oil
435
Optimization of biodiesel production by supercritical methyl acetate
436
Optimization of Biodiesel Production Conditions Using Chlorella vulgaris Microalgae Cultivated in Different Culture Medium: Statistical Analysis
437
Optimization of biodiesel production from animal fat residue in wastewater using response surface methodology
438
Optimization of biodiesel production from camelina oil using orthogonal experiment
439
Optimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
440
Optimization of biodiesel production from castor oil using factorial design
441
Optimization of biodiesel production from edible and non-edible vegetable oils
442
Optimization of biodiesel production from Moringa oleifera seeds oil in the presence of nano-MgO using Taguchi method
443
Optimization of biodiesel production from palm oil under supercritical ethanol conditions using hexane as co-solvent: A response surface methodology approach
444
Optimization of Biodiesel Production from Prunus Scoparia using Artificial Bee Colony Algorithm
445
Optimization of bio-diesel production from soybean and wastes of cooked oil: Combining dielectric microwave irradiation and a SrO catalyst
446
Optimization of biodiesel production from soybean oil in a microreactor
447
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts
448
OPTIMIZATION OF BIODIESEL PRODUCTION FROM WASTE COOKING SUNFLOWER OIL BY TAGUCHI and ANN TECHNIQUES
449
Optimization of biodiesel production in a hydrodynamic cavitation reactor using used frying oil
450
Optimization of biodiesel production in a hydrodynamic cavitation reactor using used frying oil
451
Optimization of biodiesel production process from soybean oil using the sodium potassium tartrate doped zirconia catalyst under Microwave Chemical Reactor
452
Optimization of biodiesel production process using sunflower oil and tetramethyl ammonium hydroxide as catalyst
453
Optimization of Biodiesel Production Using Immobilized Candida Rugosa Lipase on Magnetic Fe3O4-Silica Aerogel
454
Optimization of biodiesel production using waste mussel shell catalyst
455
Optimization of biodiesel supply chains based on small farmers: A case study in Brazil
456
Optimization of bioenergy yield from cultivated land in Denmark
457
Optimization of Bioethanol Production from Cassava Peels
458
Optimization of bioethanol production from intermediates of sugar beet processing by response surface methodology
459
Optimization of bioethanol production from simultaneous saccharification and fermentation of pineapple peels using Saccharomyces cerevisiae
460
Optimization of Bioethanol Production from Sweet Sorghum Bagasse Using Response Surface Methodology (RSM)
461
Optimization of biogas production by anaerobic digestion for sustainable energy development in Zimbabwe
462
Optimization of biogas production by co-digesting whey with diluted poultry manure
463
Optimization of biogas production from cattle manure by pre-treatment with ultrasound and co-digestion with crude glycerin
464
Optimization of biogas production from olive-oil mill wastewater, by codigesting with diluted poultry-manure
465
Optimization of biogas production from Sargassum sp. using a design of experiments to assess the co-digestion with glycerol and waste frying oil
466
Optimization of biogas production from wheat straw stillage in UASB reactor
467
Optimization of biohydrogen and methane recovery within a cassava ethanol wastewater/waste integrated management system
468
Optimization of biohydrogen inoculum development via a hybrid pH and microwave treatment technique – Semi pilot scale production assessment
469
Optimization of biohydrogen production by Clostridium butyricum EB6 from palm oil mill effluent using response surface methodology
470
Optimization of biohydrogen production from beer lees using anaerobic mixed bacteria
471
Optimization of biohydrogen production from soybean straw using anaerobic mixed bacteria
472
Optimization of biohydrogen production from sweet sorghum syrup using statistical methods
473
Optimization of bio-indigo production by recombinant E. coli harboring fmo gene
474
Optimization of biological hydrogen production for anaerobic co-digestion of food waste and wastewater biosolids
475
Optimization of Biological Nitrogen Removal from Anaerobic Reject Water at Pilot-scale SBR System
476
Optimization of Biological Nitrogen Removal via Nitrite in a SBR Treating Supernatant from the Anaerobic Digestion of Municipal Solid Wastes
477
Optimization of Biological Nutrient Removal in a Membrane Bioreactor System
478
Optimization of biological nutrient removal in a pilot plant UCT-MBR treating municipal wastewater during start-up Original Research Article
479
Optimization of biological nutrient removal in a SBR using simulation-based iterative dynamic programming
480
Optimization of biological nutrient removal in a SBR using simulation-based iterative dynamic programming
481
Optimization of Biological Synthesis of Silver Nanoparticles using Fusarium oxysporum
482
Optimization of biomass and biokinetic constant in Mazut biodegradation by indigenous bacteria BBRC10061
483
Optimization of biomass fuelled systems for distributed power generation using Particle Swarm Optimization
484
Optimization of biomass torrefaction conditions by the Gain and Loss method and regression model analysis
485
Optimization of biomass, pellet size and polygalacturonase production by Aspergillus sojae ATCC 20235 using response surface methodology
486
Optimization of biopolymerization rate by response surface methodology (RSM)
487
Optimization of BioPot compositions made from water hyacinth and coconut coir for improving the growth and yield of chili (Capsicum annum L.)
488
Optimization of Bioreactor Cultivation Parameters by Taguchi Orthogonal Array Design for Enhanced Prodigiosin Production
489
Optimization of bioremediation-cocktail for application in the eco-recovery of crude oil polluted soil
490
Optimization of bioresource material from oil palm trunk core drying using microwave radiation; a response surface methodology application
491
Optimization of biosurfactant production by Streptomyces isolated from Egyptian arid soil using Plackett–Burman design
492
Optimization of biosurfactant-mediated oil extraction from oil sludge
493
Optimization of biosynthesized Zn nanoparticles by poisonous Taxus baccata leaves extract and evaluation of their effect on the bacterias and MCF-7 cancer cells
494
Optimization of Bistability in Nonlinear Chalcogenide Fiber Bragg Grating for All Optical Switch and Memory Applications
495
Optimization of Bitter Almond Oil (BAO) Extraction Conditions Using Natural Enzymes and Ultrasound Waves
496
Optimization of blank dimensions to reduce springback in the flexforming process
497
optimization of blast furnace through reducing coke consumption and co2 emission using hsc software
498
Optimization of bleaching conditions for sardine oil Original Research Article
499
Optimization of blends of synthetic pheromone components for trapping male limabean pod borers (Etiella zinckenella Tr.) (Lepidoptera: Phycitidae): Preliminary evidence on geographical differences Original Research Article
500
Optimization of Body Composition Analyzer Facility, Considering Operator Dosimetry
501
Optimization of boiler cold-end and integration with the steam cycle in supercritical units
502
Optimization of boiler control to improve the load-following capability of power-plant units
503
Optimization of boiler start-up using a nonlinear boiler model and hard constraints
504
Optimization of bond strength between gold alloy and porcelain through a composite interlayer obtained by powder metallurgy
505
Optimization of boron removal in old and new SWRO systems Original Research Article
506
Optimization of bovine coronavirus hemagglutinin-estrase glycoprotein expression in E3 deleted bovine adenovirus-3
507
Optimization of Bovine Reproduction Efficiency
508
Optimization of bovine serum albumin sorption and recovery by hydrogels
509
Optimization of Brain Tumor MR Image Classification Accuracy Using Optimal Threshold, PCA and Training ANFIS with Different Repetitions
510
Optimization of brass contents for best combination of tribo-performance and thermal conductivity of non-asbestos organic (NAO) friction composites
511
Optimization of breaker schedules for stimulation of tight gas reservoirs
512
Optimization of breast imaging procedure with dedicated compact gamma cameras
513
Optimization of breast imaging procedure with dedicated compact gamma cameras
514
Optimization of breast lesion segmentation in texture feature space approach
515
Optimization of brewer’s yeast spray drying process Original Research Article
516
Optimization of bridge maintenance strategies based on multiple limit states and monitoring
517
Optimization of bridge maintenance strategies based on structural health monitoring information
518
Optimization of Bright Zn-Co-Ni Alloy Coatings and its Characterization
519
Optimization of broadband (11–15 μm) optical coupling in Quantum Well Infrared Photodetectors for space applications
520
Optimization of broadband RF performance and ESD robustness by ππ-model distributed ESD protection scheme ☆
521
Optimization of Buffalo (Bubalus bubalis) Embryonic Stem Cell Culture System
522
Optimization of buffer additives for efficient recovery of hGM-CSF from inclusion bodies using response surface methodology
523
Optimization of buffer layers for lattice-mismatched epitaxy of GaxIn1−xAs/InAsyP1−y double-heterostructures on InP
524
Optimization of building thermal design and control by multi-criterion genetic algorithm
525
Optimization of bulk cell electrofusion in vitro for production of human–mouse heterohybridoma cells
526
Optimization of bulk metallic glass forming compositions in Zr–Cu–Al system by thermodynamic modeling
527
OPTIMIZATION OF BURSTING STRENGTH OF SINGLE JERSEY FABRICS WITH TAGUCHI ORTHOGONAL DESIGN
528
Optimization of butanol production from tropical maize stalk juice by fermentation with Clostridium beijerinckii NCIMB 8052
529
Optimization of BWR fuel lattice enrichment and gadolinia distribution using genetic algorithms and knowledge
530
Optimization of C.I. Acid Red 14 azo dye removal by electrocoagulation batch process with response surface methodology
531
Optimization of C/N and current density in a heterotrophic/biofilm-electrode autotrophic denitrification reactor (HAD-BER)
532
Optimization of cable terminations
533
Optimization of Cadmium Removal from Aqueous Solutions Using Walnut-shell Residues Biochar Supported/unsupported by Nanoscale Zero-valent Iron through Response Surface Methodology
534
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology
535
Optimization of Calcium Alginate Hydrogel Bioencapsulation of Acinetobacter junii B6, a Lipopeptide Biosurfactant Producer
536
Optimization of calcium chloride content on bioactivity and mechanical properties of white Portland cement
537
Optimization of calcium concentration of saliva with phosphoryl oligosaccharides of calcium (POs-Ca) for enamel remineralization in vitro
538
Optimization of calcium concentration of saliva with phosphoryl oligosaccharides of calcium (POs-Ca) for enamel remineralization in vitro
539
Optimization of call admission control for a statistical multiplexer allocating link bandwidth
540
Optimization of Callus Induction and Regeneration in Swarna Masoori Rice Cultivar Short Title: in Vitro Somatic Embryogenesis of Swarna Masoori Rice Cultivar
541
Optimization of Callus Induction in Pennyroyal (Mentha pulegium)
542
Optimization of Callus Induction with Enhancing Production of Phenolic Compounds Production and Antioxidants Activity in Callus Cultures of Nepeta binaloudensis Jamzad (Lamiaceae)
543
Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method
544
Optimization of Candida sp. 99-125 lipase catalyzed esterification for synthesis of monoglyceride and diglyceride in solvent-free system
545
Optimization of Capacitated Vehicle Routing Problem by Nested Particle Swarm Optimization
546
Optimization of capacitive affinity sensors: drift suppression and signal amplification Original Research Article
547
Optimization of capacity and operation for CCHP system by genetic algorithm
548
Optimization of capacity expansion planning for gas transportation networks
549
Optimization of capillary coating by hydroxyethyl methacrylate for capillary zone electrophoresis of proteins
550
Optimization of capillary electrophoresis conditions for in-capillary enzyme-catalyzed microreactions Original Research Article
551
Optimization of capillary electrophoresis–inductively coupled plasma mass spectrometry for species analysis of metallothionein-like proteins extracted from liver tissues of Elbe-bream and Roe deer
552
Optimization of capillary electrophoretic separation of several inhibitors of the angiotensin-converting enzyme
553
Optimization of capillary flow through square micropillar arrays
554
Optimization of capillary structures for inverted meniscus evaporators of loop heat pipes and heat switches
555
optimization of Capital Decisions in health Care Industry
556
Optimization of carbamazepine removal in O3/UV/H2O2 system using a response surface methodology with central composite design Original Research Article
557
Optimization of carbohydrate silylation for gas chromatography
558
Optimization of carbon coatings on LiFePO4
559
optimization of carbon dioxide capture process parameters in sodium metaborate solution
560
Optimization of carbon doped molybdenum oxide thin film coating process using designed experiments
561
Optimization of Carbon Fiber Composite for Microwave Absorber
562
Optimization of carbon fiber usage in Type 4 hydrogen storage tanks for fuel cell automobiles
563
Optimization of Carbon Nano Tubes Synthesis using Fluidized bed Chemical Vapor Deposition: A Statistical Approach
564
Optimization of carbon nanotube powder growth using low pressure floating catalytic chemical vapor deposition
565
Optimization of carbon nanotube synthesis from porous anodic Al–Fe–Al templates Original Research Article
566
Optimization of Carborundumʹs gas igniter furnacing process using experimental design
567
Optimization of cardiac fiber orientation for homogeneous fiber strain at beginning of ejection
568
Optimization of carotenoid production by Rhodotorula graminis DBVPG 7021 as a function of trace element concentration by means of response surface analysis
569
Optimization of carrier-mediated three-phase hollow fiber microextraction combined with HPLC-UV for determination of propylthiouracil in biological samples
570
Optimization of cascade hydropower system operation by genetic algorithm to maximize clean energy output
571
Optimization of Casein Hydrolysis for Obtaining High Contents of Small Peptides: Use of Subtilisin and Trypsin
572
Optimization of cask for transport of radioactive material under impact loading
573
Optimization of cassava peel medium to an enriched animal feed by the white rot fungi Panus tigrinus M609RQY
574
Optimization of Cassegrain type 3-pass amplifier with ASE
575
Optimization of Catalase Production by Kocuria sp. ASB107 Using Response Surface Methodology and Molasses as the Carbon Source
576
Optimization of catalyst ink composition for the preparation of a membrane electrode assembly in a proton exchange membrane fuel cell using the decal transfer
577
Optimization of catalytic glycerol steam reforming to light olefins using Cu/ZSM-5 catalyst
578
Optimization of catalytic, surface and magnetic properties of nanocrystalline manganese ferrite
579
Optimization of catalytic, surface and magnetic properties of nanocrystalline manganese ferrite
580
Optimization of cathodic protection system by BEM
581
Optimization of catholyte concentration and anolyte pHs in two chamber microbial electrolysis cells
582
Optimization of cationic amino starch synthesis using biogenic amines
583
Optimization of caustic current efficiency in a zero-gap advanced chlor-alkali cell with application of genetic algorithm assisted by artificial neural networks
584
Optimization of caviar and meat production from white sturgeon (Acipenser transmontanus)
585
Optimization of cavitation peening parameters for fatigue performance of carburized steel using Taguchi methods
586
Optimization of CCR4 antagonists: Side-chain exploration
587
Optimization of CCVD synthesis conditions for single-wall carbon nanotubes by statistical design of experiments (DoE) Original Research Article
588
Optimization of Cd(II), Cu(II) and Ni(II) biosorption by chemically modified Moringa oleifera leaves powder
589
Optimization of CdS/TiO2 nano-bulk composite photocatalysts for hydrogen production from Na2S/Na2SO3 aqueous electrolyte solution under visible light (λ ≥ 420 nm)
590
Optimization of CE Separation of Roxarsone and Several Arsenic Compounds
591
Optimization of cell conditions for enzymatic fuel cell using statistical analysis
592
Optimization of Cell Parameterizations for Tomographic Inverse Problems
593
Optimization of cell yield of Candida krusei SO1 and Saccharomyces sp. LK3G cultured in sorghum hydrolysate
594
Optimization of cellular nucleotide extraction and sample preparation for nucleotide pool analyses using capillary electrophoresis
595
Optimization of cellulase mixture for efficient hydrolysis of steam-exploded corn stover by statistically designed experiments
596
Optimization of cellulase production by a brown rot fungus Fomitopsis sp. RCK2010 under solid state fermentation
597
Optimization of Cellulase Production by Aspergillus Terreus under Submerged Fermentation Using Response Surface Methodology
598
Optimization of cellulases production by Trichoderma citrinoviride on marc of Artemisia annua and its application for bioconversion process
599
Optimization of cellulose acetate hollow fiber reverse osmosis membrane production using Taguchi method
600
Optimization of cellulose acetate nanofiltration membranes for micropollutant removal via genetic algorithms and high throughput experimentation
601
Optimization of cellulose extraction from sugar beet pulp
602
Optimization of cement mortar strength from raw mix containing metallic particles
603
Optimization of Cement Spacer Rheology Model Using Genetic Algorithm (RESEARCH NOTE)
604
Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology
605
Optimization of centroid-finding algorithms for cathode strip chambers
606
Optimization of CeO2–TiO2 composition for fast switching kinetics and improved Li ion storage capacity
607
Optimization of cephalexin synthesis with immobilized penicillin acylase in ethylene glycol medium at low temperatures
608
Optimization of ceramic friction materials
609
Optimization of ceramic strength using elastic gradients Original Research Article
610
Optimization of cereal output in presence of locusts
611
Optimization of CH Fluorescence Diagnostics in Flames: Range of Applicability and Improvements with Hydrogen Addition
612
Optimization of Chalcogenide CdTe, CZTS and CZTSe Solar Cells PerformancesUsing Cd1-xZnxS Buffer Layer
613
Optimization of Chalcopyrite Bioleaching using Two Different Adaptation Methods: Top-Down and Bottom-Up
614
Optimization of char and tar conversion in fluidized bed biomass gasifiers
615
Optimization of characteristics of porous materials based on a modal synthesis method
616
Optimization of charge parameters for lead–acid batteries used in photovoltaic systems
617
Optimization of chemical admixture for concrete on mortar performance tests using mixture experiments
618
Optimization of chemical and instrumental parameters in hydride generation laser-induced breakdown spectrometry for the determination of arsenic, antimony, lead and germanium in aqueous samples Original Research Article
619
Optimization of chemical composition for TC11 titanium alloy based on artificial neural network and genetic algorithm
620
Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing
621
Optimization of chemical regeneration procedures of spent activated carbon
622
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
623
Optimization of chemically defined medium for recombinant Pichia pastoris for biomass production
624
Optimization of chemotherapy administration for clinical 41.8 °C whole body hyperthermia
625
Optimization of chicken manure combustion parameters in the aspect of phosphorus recovery
626
Optimization of Chip Interconnect Area by using Interconnect Length and Width
627
Optimization of Chitinase Production by Bacillus pumilus Using Plackett-Burman Design and Response Surface Methodology
628
Optimization of Chitosan and Cellulose Acetate Phthalate Controlled Delivery of Methylprednisolone for Treatment of Inflammatory Bowel Disease
629
Optimization of Chitosan and Cellulose Acetate Phthalate Controlled Delivery of Methylprednisolone for Treatment of Inflammatory Bowel Disease
630
Optimization of chitosan and β-cyclodextrin molecularly imprinted polymer synthesis for dye adsorption
631
Optimization of chitosan extracted from Matuta lunaris shells by using response surface methodology (RSM
632
Optimization of chitosan treatments for managing microflora in lettuce seeds without affecting germination
633
Optimization of chromatographic parameters for the determination of biogenic amines in wines by reversed-phase high-performance liquid chromatography
634
Optimization of chromium oxide nanopowders dispersion for spray-drying
635
Optimization of chromium(VI) biosorption using gooseberry seeds by response surface methodology
636
Optimization of chromium(VI) sorption potential using developed activated carbon from sugarcane bagasse with chemical activation by zinc chloride Original Research Article
637
Optimization of circular fins with variable thermal parameters
638
Optimization of clamped plates with discontinuous thickness
639
Optimization of Clarkson’s Method for Calculating Absorbed Dose under Compensator Filters used in Intensitymodulated Radiation Therapy
640
Optimization of Classification Strategies of Acetowhite Temporal Patterns towards Improving Diagnostic Performance of Colposcopy
641
Optimization of classification trees: strategy and algorithm improvement Original Research Article
642
Optimization of clean fractionation process applied to switchgrass to produce pulp for enzymatic hydrolysis
643
Optimization of clean fractionation processing as a pre-treatment technology for prairie cordgrass
644
Optimization of clean-up procedure for patulin determination in apple juice and apple purees by liquid chromatography
645
Optimization of clinical target volume delineation using magnetic resonance spectroscopic imaging (MRSI) in 3D conformal radiotherapy of prostate cancer
646
Optimization of Clodinafop-Propargyl Herbicide Removal Using a Batch Photoreactor UV/TiO₂/H₂O₂ from Aqueous Solution
647
Optimization of Cloning Conditions for High-level Production of Recombinant Mouse Interleukin-2 in Escherichia coli
648
Optimization of cloud point extraction and solid phase extraction methods for speciation of arsenic in natural water using multivariate technique Original Research Article
649
Optimization of ClusterCarbon™ process parameters for strained Si lattice
650
Optimization of CMOS active pixels with high signal-to-noise ratio for high-resolution X-ray imaging
651
Optimization of CMOS active pixels with high signal-to-noise ratio for high-resolution X-ray imaging
652
Optimization of CMOS pixel sensors for high performance vertexing and tracking
653
Optimization of CMOS pixel sensors for high performance vertexing and tracking
654
Optimization of CNC ball end milling: a neural network-based model
655
Optimization of CO2 bio-mitigation by Chlorella vulgaris
656
Optimization of CO2 Capture Process Using Dry Sodium-Based Sorbents
657
Optimization of CO2 compression and purification units (CO2CPU) for CCS power plants
658
Optimization of CO2 laser-based pretreatment of corn stover using response surface methodology
659
Optimization of coagulation and dissolved air flotation (DAF) treatment of semi-aerobic landfill leachate using response surface methodology (RSM) Original Research Article
660
Optimization of coagulation–flocculation process for a paper-recycling wastewater treatment using response surface methodology
661
Optimization of coagulation–flocculation process for papermaking-reconstituted tobacco slice wastewater treatment using response surface methodology
662
Optimization of Coagulation-Flocculation Process of Landfill Leachate by Tin (IV) Chloride Using Response Surface Methodology
663
Optimization of coal flotation using statistical technique
664
Optimization of coal pyrolysis modeling
665
Optimization of coal reburning in a 1 MW tangentially fired furnace
666
Optimization of coal-fired boiler SCRs based on modified support vector machine models and genetic algorithms
667
Optimization of coating parameters for duplex treated AISI 5140 steel
668
Optimization of coating parameters for duplex treated AISI 5140 steel
669
Optimization of coating variables for hardness of industrial tools by using artificial neural networks
670
Optimization of cocoa beans roasting process using Response Surface Methodology based on concentration of pyrazine and acrylamide
671
Optimization of cocurrent spray drying process for sugar-rich foods. Part II—Optimization of spray drying process based on glass transition concept Original Research Article
672
Optimization of co-current spray drying process of sugar-rich foods. Part I—Moisture and glass transition temperature profile during drying Original Research Article
673
Optimization of COD removal of raw landfill leachate using the magnetic graphene oxide/WO3 nanocomposite: Isotherms, kinetics, and thermodynamics studies
674
Optimization of Coding Potentials Using Positional Dependence of Nucleotide Frequencies
675
Optimization of Coenzyme Q10 Production by Gluconobacter japonicus FM10 Using Response Surface Methodology
676
Optimization of cogeneration systems under alternative performance criteria
677
Optimization of Col H Gene Encoding Clostridium histolyticum Collagenase to Express in Escherichia coli
678
Optimization of cold cathode saddle field ion source
679
Optimization of cold cathode saddle field ion source
680
Optimization of cold rolling process parameters in order to increasing rolling speed limited by chatter vibrations
681
Optimization of cold-active protease production by the psychrophilic bacterium Colwellia sp. NJ341 with response surface methodology
682
Optimization of cold-formed steel pallet racking cross-sections for flexural–torsional buckling with constraints on the geometry
683
Optimization of collinear double-pulse femtosecond laser-induced breakdown spectroscopy of silicon
684
Optimization of collinear double-pulse femtosecond laser-induced breakdown spectroscopy of silicon
685
Optimization of colorimetric DET technique for the in situ, two-dimensional measurement of iron(II) distributions in sediment porewaters
686
Optimization of combinations of bactericidal and bacteriostatic treatments to control Listeria monocytogenes on cold-smoked salmon
687
Optimization of combined (acid + thermal) pretreatment for fermentative hydrogen production from Laminaria japonica using response surface methodology (RSM)
688
Optimization of combined cycle power plants using evolutionary algorithms
689
Optimization of combined mechanical activation-roasting parameters of titania slag using response surface methodology
690
Optimization of combined microwave pretreatment–magnetic separation parameters of ilmenite using response surface methodology
691
Optimization of combined photocatalytic involving immobilized ZnO nanoparticles and electrochemical processes for ammoniacal nitrogen removal from aqueous solutions
692
Optimization of combustion based on introducing radiant energy signal in pulverized coal-fired boiler
693
Optimization of combustion chamber geometry and engine operating conditions for compression ignition engines fueled with dimethyl ether
694
Optimization of combustion chamber geometry for stoichiometric diesel combustion using a micro genetic algorithm
695
Optimization of combustion characteristics of palm kernel‑based biofuel for grate furnace
696
Optimization of commercial net spacers in spiral wound membrane modules
697
Optimization of comminution circuit simulations based on genetic algorithms search method
698
Optimization of communication network topology for navigation sharing among distributed satellites Original Research Article
699
Optimization of community-led 3D printing for the production of protective face shields
700
Optimization of compact gamma cameras for breast imaging
701
Optimization of compact gamma cameras for breast imaging
702
Optimization of compact heat exchangers by a genetic algorithm
703
Optimization of compact lateral, vertical, and combined tapered spot-size converters by use of the beam-propagation method
704
Optimization of comparative expressed sequence hybridization for genome-wide expression profiling at chromosome level
705
Optimization of complex powertrain systems for fuel economy and emissions
706
Optimization of component reliability in the design phase of capital goods
707
Optimization of components and assembling in a PEM electrolyzer stack
708
Optimization of composite I-sections using fiber angles as design variables
709
Optimization of composite plates with piezoelectric stiffener-actuators under in-plane compressive loads
710
Optimization of composite sandwich cylinders for underwater vehicle application
711
Optimization of composite sandwich panel against impact using genetic algorithm
712
Optimization of Composite Stiffened Cylindrical Shell using PSO Algorithm
713
Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms
714
Optimization of composite structures subject to local stress constraints Original Research Article
715
Optimization of composition and mixing process of a self-healing porous asphalt
716
Optimization of composition and technology for phosphate graphite mold
717
Optimization of composition of as-cast chromium white cast iron based on wear-resistant performance
718
Optimization of compound refractive lenses for X-rays
719
Optimization of compound refractive lenses for X-rays
720
Optimization of comprehensive two dimensional gas chromatography-flame ionization detection–quadrupole mass spectrometry for the separation of octyl- and nonylphenol isomers
721
Optimization of comprehensive two-dimensional gas-chromatography (GC × GC) mass spectrometry for the determination of essential oils
722
Optimization of comprehensive two-dimensional gradient chromatography coupling in-line hydrophilic interaction and reversed phase liquid chromatography
723
Optimization of Compton-suppression and summing schemes for the TIGRESS HPGe detector array
724
Optimization of Compton-suppression and summing schemes for the TIGRESS HPGe detector array
725
Optimization of computer numerical control set-up parameters to manufacture rapid prototypes
726
Optimization of computer simulation models with rare events
727
Optimization of concentrating solar thermal power plant based on parabolic trough collector
728
Optimization of concentration process on pomelo fruit juice using response surface methodology (RSM)
729
Optimization of concrete hollow brick using hybrid genetic algorithm combining with artificial neural networks
730
Optimization of concrete structure mixture plan in marine environment using genetic algorithm
731
Optimization of condition for demineralization Baltic cod (Gadus morhua) backbone
732
Optimization of conditionally replicative adenovirus for pancreatic cancer and its evaluation in an orthotopic murine xenograft model
733
Optimization of Conditions for cellulase Secretion for Some soil Fungi in Vitro
734
Optimization of conditions for flow-through partial-filling affinity capillary electrophoresis to estimate binding constants of ligands to receptors Original Research Article
735
Optimization of conditions for galactooligosaccharide synthesis during lactose hydrolysis by β-galactosidase from Kluyveromyces lactis (Lactozym 3000 L HP G)
736
Optimization of conditions for gene delivery system based on PEI
737
Optimization of conditions for hydrogen production from complex dairy wastewater by anaerobic sludge using desirability function approach
738
Optimization of conditions for in vitro production of radical oxygen species and expression of tissue factor by canine mononuclear cells and granulocytes for use in high-throughput assays
739
Optimization of conditions for in vitro production of radical oxygen species and expression of tissue factor by canine mononuclear cells and granulocytes for use in high-throughput assays
740
Optimization of conditions for production of sago starch-based foam
741
Optimization of conditions for profiling bacterial populations in food by culture-independent methods
742
Optimization of conditions for protease production by Chryseobacterium taeanense TKU001
743
Optimization of conditions for the determination of boron by a ruthenium(II) complex having diol moiety: A mechanistic study
744
Optimization of conditions for the extraction of phorbol esters from Jatropha oil
745
Optimization of conditions for the preparation of activated carbons from olive-waste cakes Original Research Article
746
Optimization of conditions for thermal treatment of rice bran using an accelerator including an organo-iron compound
747
Optimization of conditions of solvent-free microwave extraction and study on antioxidant capacity of essential oil from Schisandra chinensis (Turcz.) Baill
748
Optimization of Conditions to Produce Manganese and Iron Carbides from Denizli-Tavas Manganese Ore by Solid State
749
Optimization of conduction-cooled current leads with unsteady operating current Original Research Article
750
Optimization of conduction-cooled Peltier current leads Original Research Article
751
Optimization of conformal avoidance: A comparative study of prone vs. supine interstitial high-dose-rate breast brachytherapy
752
Optimization of Conical Wings in Hypersonic Flow
753
Optimization of constrained composite absorbers using simulated annealing
754
Optimization of constrained multiple-objective reliability problems using evolutionary algorithms
755
Optimization of constrained multiple-objective reliability problems using evolutionary algorithms
756
Optimization of constructal economics for volume-to-point transport
757
Optimization of constructal volume-point conduction with variable cross section conducting path
758
Optimization of consumed steel, opening height and location in RC beams by genetic algorithms
759
Optimization of contact conditions between iron base alloys and mercury at room temperature
760
Optimization of contact pressure profile for performance improvement of a rotary elastomeric seal operating in abrasive drilling environment
761
Optimization of Continual Production of CNTs by CVD Method using Radial Basic Function (RBF) Neural Network and the Bees Algorithm
762
Optimization of continuous acid-catalyzed esterification for free fatty acids reduction in mixed crude palm oil using static mixer coupled with high-intensity ultrasonic irradiation
763
Optimization of continuous ball mills used for finish-grinding of cement by varying the L/D ratio, ball charge filling ratio, ball size and residence time
764
Optimization of Continuous Berth Scheduling by Taking into Account Double-Line Ship Mooring
765
Optimization of Continuous Dress Creep-Feed Form Grinding Process
766
Optimization of continuous elastic perfectly plastic beams
767
Optimization of Continuous Flow Adsorption of Heavy Metal Ions on Continuous System Column by Peganum Harmala Seeds
768
Optimization of continuous hydrogen production from co-fermenting molasses with liquid swine manure in an anaerobic sequencing batch reactor
769
Optimization of continuous hydrogenation of soybean lecithin using factorial design
770
Optimization of continuous phenol extraction from Vitis vinifera byproducts
771
Optimization of continuous ranked probability score using PSO
772
Optimization of contrast delivery for pulmonary CT angiography
773
Optimization of contrast dosage for gadolinium-enhanced 3D MRA of the pulmonary and renal arteries
774
Optimization of control source configuration in active control systems using Gram-Schmidt orthogonalization
775
Optimization of control strategies for epidemics in heterogeneous populations with symmetric and asymmetric transmission
776
Optimization of control strategies for stand-alone renewable energy systems with hydrogen storage
777
Optimization of Control System of Petroleum Refinery Isomerization Unit by Plant-Wide Control Principles
778
Optimization of Controlled Water and Nitrogen Fertigation on Greenhouse Culture of Capsicum annuum
779
Optimization of Convective Heat Transfer from Two Heating Generators into Horizontal Enclosure Including A Discrete Obstacle: A Lattice Boltzmann Comprehensive Investigation
780
Optimization of convective–radiative fins by using differential quadrature element method
781
Optimization of conventional ellipsometric setups for determining the dielectric tensor of arbitrarily anisotropic systems
782
Optimization of convergence rate and stability margin of information flow in cooperative systems
783
Optimization of conversion of waste rapeseed oil with high FFA to biodiesel using response surface methodology
784
Optimization of convex electrode geometry for surface discharge used for fabrication of the electrode groove on solar cells
785
Optimization of copper adsorption process from aqueous solution by Descurainia sophia plant stem using Taguchi method
786
Optimization of copper and zinc extractions from polymetallic bulk concentrate and ferric iron bioregeneration under metallic stress
787
Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology
788
Optimization of copper cementation process by iron using central composite design experiments
789
Optimization of copper electrowinning from synthetic copper sulfate solution using a pulsed bed electrode
790
Optimization of copper nanoparticles synthesis using E. coli and the study of its antifungal activity
791
optimization of copyright as fiduciary guarantee in increasing business productivity
792
Optimization of core reload pattern for PARR-1 using evolutionary techniques Original Research Article
793
Optimization of corona discharge process using Box–Behnken design of experiments
794
Optimization of Corona Electrode Position in Roll-Type Electrostatic Separators
795
Optimization of coronary whole-heart MRA free-breathing technique at 3 Tesla
796
Optimization of Correlation Filters Using Extended Particle Swarm Optimization Technique
797
Optimization of Corrosion Information in Oil and Gas Wells Using Electrochemical Experiments
798
Optimization of Corrosion Inhibition of Mild Steel by Ethanol Extract of Prosopis Juliflora in HCl Medium using Factorial Analysis
799
Optimization of corrugated-QWIPs for large format, high quantum efficiency, and multi-color FPAs
800
Optimization of cost and downtime for replacement model following the expiration of warranty
801
Optimization of cost and downtime for replacement model following the expiration of warranty
802
Optimization of costs of Port Operations in Nigeria: A Scenario For Emerging River Ports
803
Optimization of cotton seed biodiesel quality (critical properties) through modification of its FAME composition by highly selective homogeneous hydrogenation
804
Optimization of counter flow Ranque–Hilsch vortex tube performance using Taguchi method
805
Optimization of countercurrent supercritical fluid extraction conditions for spirits fractionation
806
Optimization of counterflow heat exchanger geometry through minimization of entropy generation Original Research Article
807
Optimization of counting times for short-lived gamma-ray emitters in air filter samples
808
Optimization of course locations in fiber-placed panels for general fiber angle distributions
809
Optimization of covalent antibody immobilization on macroporous silicon solid supports
810
Optimization of Cr content of metastable β-type Ti–Cr alloys with changeable Young’s modulus for spinal fixation applications
811
Optimization of Cr(VI) Photocatalytic Reduction by UV/TiO2: Influence of Inorganic and Organic Species and Kinetic Study
812
Optimization of Cr(VI) reduction by zero-valent bimetallic nanoparticles using the response surface modeling approach Original Research Article
813
Optimization of creep function parameters of viscoelastic pipelines based on transient pressure signal
814
Optimization of CRF1R binding affinity of 2-(2,4,6-trichlorophenyl)-4-trifluoromethyl-5-aminomethylthiazoles through rapid and selective parallel synthesis
815
Optimization of critical factors to enhance polyhydroxyalkanoates (PHA) synthesis by mixed culture using Taguchi design of experimental methodology
816
Optimization of Critical Medium Components for the Expression of Recombinant Human Transferrin in Insect Cells Baculovirus System
817
Optimization of cross flow heat exchangers for thermoelectric waste heat recovery
818
Optimization of cross-linking parameters during production of transglutaminase-hardened spherical multinuclear microcapsules by complex coacervation
819
Optimization of Crude Oil Biodegradation by Brevibacterium sp. Isolated from the Native Sponges of the Persian Gulf
820
Optimization of crude polysaccharides extraction from Hizikia fusiformis using response surface methodology
821
Optimization of Crush Initiators on Steel Front Rail of Vehicle
822
Optimization of cryogenic treatment to maximize the wear resistance of 18% Cr martensitic stainless steel by Taguchi method
823
Optimization of crystal microstructure in piezoelectric ceramics by multiscale finite element analysis Original Research Article
824
Optimization of Crystal Violet Adsorption by Chemically Modified Potato Starch Using Response Surface Methodology
825
Optimization of crystalline tungsten oxide nanoparticles for improved electrochromic applications
826
Optimization of crystals for applications in dual-readout calorimetry
827
Optimization of crystals for applications in dual-readout calorimetry
828
Optimization of CT slice thickness in 3D-CRT and IMRT planning of low grade glioma
829
Optimization of Cu doped ceria nanoparticles as catalysts for low-temperature methanol and ethylene total oxidation
830
Optimization of Cu oxide catalyst for methanol synthesis under high CO2 partial pressure using combinatorial tools Original Research Article
831
Optimization of Cu oxide catalysts for methanol synthesis by combinatorial tools using 96 well microplates, artificial neural network and genetic algorithm
832
Optimization of cubic GaN/AlGaN quantum well-based structures for intersubband absorption in the infrared spectral range
833
Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid
834
Optimization of cultural and nutritional conditions for accumulation of poly-β-hydroxybutyrate in Synechocystis sp. PCC 6803
835
Optimization of cultural conditions using response surface methodology versus artificial neural network and modeling of l-glutaminase production by Bacillus cereus MTCC 1305
836
Optimization of Culture Condition for the Production of Menaquinone-7 by Bacillus Subtilis Natto
837
Optimization of culture conditions and electricity generation using Geobacter sulfurreducens in a dual-chambered microbial fuel-cell
838
Optimization of Culture Conditions and Medium Components for Carboxymethyl Cellulase (CMCase) Production by a Novel Basidiomycete Strain Peniophora sp. NDVN01
839
Optimization of Culture Conditions and Reaction Parameters of β-Glucosidase From a New Isolate of Bacillus subtilis (B1)
840
Optimization of culture conditions for Aspergillus sojae expressing an Aspergillus fumigatus α-galactosidase
841
Optimization of Culture Conditions for Bacteriocin Production by Soil Isolates
Pediococcus pentosaceus
LB44 and
Weissella confusa
LM85
842
Optimization of culture conditions for biological hydrogen production by Citrobacter freundii CWBI952 in batch, sequenced-batch and semicontinuous operating mode
843
Optimization of Culture Conditions for Enrichment of Saccharomyces cerevisiae with Dl-α-Tocopherol by Response Surface Methodology
844
Optimization of culture conditions for growth of the Aurantiochytrium sp. shy, isolated from the Persian Gulf
845
Optimization of culture conditions for hydrogen production by Ethanoligenens harbinense B49 using response surface methodology
846
Optimization of Culture Conditions for Keratinase Production in Streptomyces Sp. JRS19 for Chick Feather Wastes Degradation
847
Optimization of Culture Conditions for Maximal Lovastatin Production by Aspergillus terreus (KM017963) under Solid State Fermentation
848
Optimization of culture conditions for production of cis-epoxysuccinic acid hydrolase using response surface methodology
849
Optimization of culture conditions for production of yeast biomass using bamboo wastewater by response surface methodology
850
Optimization of Culture Conditions of Porcellio dilatatus (Crustacea: Isopoda) for Laboratory Test Development
851
Optimization of culture conditions of the thraustochytrid Aurantiochytrium sp. strain 18W-13a for squalene production
852
Optimization of Culture Conditions to Improve Follicle-Stimulating Hormone Production by CHO-DG44 Cells in Serum-Free Medium
853
Optimization of culture media for ethanol production from glycerol by Escherichia coli
854
Optimization of culture media for lipid production by Nannochloropsis oculata for Biodiesel production
855
Optimization of culture media for protease production by Aspergillus fungi
856
Optimization of culture media of pathogenic Mycoplasma hyopneumoniae by a response surface methodology
857
Optimization of Culture Medium for Bakerʹs Yeast, Ethanol, Citric Acid and A-amylase Production from Dates Syrup.
858
Optimization of culture medium for the production of phenyllactic acid by Lactobacillus sp. SK007
859
Optimization of Culture Medium to Increase The Biomass Production of Scenedesmus obliquus; the Impact of Carbon Source
860
Optimization of culture variables for improving glucoamylase production by alginate-entrapped Thermomucor indicae-seudaticae using statistical methods
861
Optimization of curcumin nanoemulsion for intranasal delivery using design of experiment and its toxicity assessment
862
Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties
863
Optimization of cushion conditions in micro multi-point sheet forming
864
Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools
865
Optimization of Cutting Conditions using Enhanced Z Map Model
866
Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments
867
Optimization of Cutting Parameters Based on Production Time Using Colonial Competitive (CC) and Genetic (G) Algorithms
868
Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA
869
Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites
870
Optimization of cutting parameters in multi-pass turning using artificial bee colony-based approach
871
Optimization of Cutting Parameters of Multiple Performance Characteristics in End Milling of AlSi/AIN MMC – Taguchi Method and Grey Relational Analysis
872
Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite
873
Optimization of CVD growth of CNT-based hybrids using the Taguchi method
874
Optimization of cyanidation parameters to increase the capacity of Aghdarre gold mill
875
Optimization of cyclic parameters of a supercritical cycle for geothermal power generation
876
Optimization of cyclic production systems: a heuristic approach
877
Optimization of cyclodextrin production from sago starch
878
Optimization of cyclohexene epoxidation with dilute hydrogen peroxide and silica-supported titanium catalysts Original Research Article
879
Optimization of cycloidal water turbine and the performance improvement by individual blade control
880
Optimization of cylindrical composite shells with regard to their critical mode of imperfections
881
Optimization of cylindrical shells with compliant cores
882
Optimization of cytokine stability in stored amniotic fluid
883
Optimization of daily yield for an active double effect distillation with water flow
884
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam)
885
Optimization of damping and absorbing performance of shunted piezo elements utilizing negative capacitance
886
Optimization of data resampling through GA for the classification of imbalanced datasets
887
Optimization of date syrup for enhancement of the production of citric acid using immobilized cells of Aspergillus niger
888
Optimization of deacetylation in the production of chitosan from shrimp wastes: Use of response surface methodology Original Research Article
889
Optimization of deacidification process for Morinda citrifolia extracts using packed column of calcium carbonate
890
Optimization of Dead Tank Gas Circuit Breaker Design Based on Quantification of Hot Gas Flow and Dielectric Properties
891
Optimization of deep penetration laser welding of thick stainless steel with a 10 kW fiber laser
892
Optimization of Deficit Irrigation and Nitrogen Rates on Bread Irrigated Wheat at Northwest of Iran
893
Optimization of Degradation of Petroleum Crude Oil by Lysinibacillus sp. SS1 in Seawater by Response Surface Methodology
894
Optimization of Delay Time at Signalized Intersections using Direction -Wise Dynamic PCE Value
895
Optimization of Dendrimer Polyamidoamin Electrospun Nanofibers: Preparation and Properties
896
Optimization of deposition conditions for development of high corrosion resistant Zn–Fe multilayer coatings
897
Optimization of deposition uniformity for large-aperture National Ignition Facility substrates in a planetary rotation system
898
Optimization of depth resolution parameters in AES sputter profiling of GaAsrAlAs multilayer structures
899
Optimization of desalted water production in a poligeneration scheme for the tourist sector Original Research Article
900
Optimization of desiccant wheel speed and area ratio of regeneration to dehumidification as a function of regeneration temperature
901
Optimization of design and beam test of microstrip gas chambers
902
Optimization of design and operating parameters in a pilot scale Jameson cell for slime coal cleaning
903
Optimization of Design and Planing VHS Building Using Chronolux
904
Optimization of design flow rates and component sizing for residential ventilation
905
Optimization of design parameters for control charts with multiple assignable causes
906
Optimization of design parameters for multi-effect active distillation systems using the Runge-Kutta method
907
Optimization of design parameters for nanofluids flowing inside helical coils
908
Optimization of design parameters using a response surface method in a cold cross-wedge rolling
909
Optimization of desmear process for high adhesion of insulating film in printed circuit boards (PCBs) via Taguchi method
910
Optimization of desulphurization of Artvin–Yusufeli lignite with acidic hydrogen peroxide solutions
911
Optimization of detection system based on inorganic scintillation crystal coupled with a long lightguide
912
Optimization of detection system based on inorganic scintillation crystal coupled with a long lightguide
913
Optimization of Detention Time for Domestic Wastewater Treatment using Phycoremediation
914
Optimization of Determinant Factors of Satellite Electrical Power System with Particle Swarm Optimization (PSO) Algorithm
915
Optimization of determination of CO2 gas hydrates surface tension in the presence of non-ionic surfactants and TBAC
916
Optimization of dewatering systems for mineral processing
917
Optimization of DGGE community fingerprinting for characterizing Escherichia coli communities associated with fecal pollution
918
Optimization of diagonal chromatography for recognizing post-translational modifications
919
Optimization of diamine bridges in glutaraldehyde treated bioprosthetic aortic wall tissue
920
Optimization of diarylamines as non-nucleoside inhibitors of HIV-1 reverse transcriptase
921
Optimization of dicarboxylic acid cellulose synthesis: Reaction stoichiometry and role of hypochlorite scavengers
922
Optimization of diclofenac quantification from wastewater treatment plant sludge by ultrasonication assisted extraction
923
Optimization of Die Geometry for Tube Channel Pressing
924
Optimization of die geometry for tube channel pressing
925
Optimization of Die Material and Its Surface Coating for Press Forming Magnesium Alloy
926
OPTIMIZATION OF DIE PROFILE FOR COLD FORWARD EXTRUSION USING AN IMPROVED SLAB METHOD ANALYSIS
927
Optimization of die profile for improving die life in the hot extrusion process
928
Optimization of dielectric properties of barium rare earth titanate by complex substitution
929
Optimization of diesel, methyl tallowate and ethanol blend for reducing emissions from diesel engine
930
Optimization of dietary folate or low-dose folic acid supplements lower homocysteine but do not enhance endothelial function in healthy adults, irrespective of the methylenetetrahydrofolate reductase (C677T) genotype
931
Optimization of dietary protein requirement for pond-reared mahseer Tor putitora Hamilton (Cypriniformes: Cyprinidae)
932
Optimization of Different Drying Systems for Lavender Leaves Applying Response Surface Methodology
933
Optimization of Different Parameters for Transformation of Elite Maize Inbred Lines
934
Optimization of Different Reconstructive Approaches for Reconstruction of Intraoral Defects after Tumor Extirpation
935
Optimization of digested chicken manure filtrate supplementation for lipid overproduction in heterotrophic culture Chlorella protothecoides
936
Optimization of digital filters for the detection of trace elements in EELS. III – Gaussian, homomorphic and adaptive filters
937
Optimization of digital filters for the detection of trace elements in EELS. III – Gaussian, homomorphic and adaptive filters
938
Optimization of dilute acid-based pretreatment and application of laccase on apple pomace
939
Optimization of dilute-phosphoric-acid steam pretreatment of Eucalyptus benthamii for biofuel production
940
Optimization of Dimensional Deviations in Wax Patterns for Investment Casting
941
Optimization of dimensions and inner surface of water Cherenkov detector with one photomultiplier tube (PMT) for the Alborz observatory air shower array
942
Optimization of dimethyltin chloride determination by hydride generation gas phase molecular absorption spectrometry using a central composite design
943
Optimization of direct conversion of methane to liquid fuels over Cu loaded W/ZSM-5 catalyst
944
Optimization of direct reduction in tunnel furnace using different resources of ferrous oxides
945
Optimization of Direct Yellow 12 dye removal by nanoscale zero-valent iron using response surface methodology
946
Optimization of Dispersed Generation Systems including Risk Aversion
947
Optimization of dispersing agents for preparing YAG transparent ceramics
948
Optimization of dispersive liquid–liquid microextraction and improvement of detection limit of methyl tert-butyl ether in water with the aid of chemometrics
949
Optimization of Dispersive Liquid–Liquid Microextraction by Microvolume Spectrophotometry Method to Determination of Celestine Blue in Water Sample: Response Surface Methodology
950
Optimization of dispersive liquid–liquid microextraction combined with gas chromatography for the analysis of nitroaromatic compounds in water
951
Optimization of dispersive liquid–liquid microextraction coupled with inductively coupled plasma-optical emission spectrometry with the aid of experimental design for simultaneous determination of heavy metals in natural waters
952
Optimization of dispersive liquid–liquid microextraction for preconcentration and spectrophotometric determination of phenols in Chabahar Bay seawater after derivatization with 4-aminoantipyrine
953
Optimization of dispersive liquid–liquid microextraction of copper (II) by atomic absorption spectrometry as its oxinate chelate: Application to determination of copper in different water samples
954
Optimization of dispersive liquid–liquid microextraction procedure for detecting chlorpyrifos in human urine samples
955
Optimization of Dissolution Conditions During Fractionation of Corn-cob in ZnCl2.4H2O/Urea Solvent System: A Statistical Approach
956
Optimization of dissolution of ulexite in water saturated with sulphur dioxide
957
Optimization of dissolved organic nitrogen (DON) measurements in aqueous samples with high inorganic nitrogen concentrations
958
Optimization of Distillation Column Operation by Simulated Annealing
959
Optimization of distributed resistive metal film heaters in thermally tunable dispersion compensators for high-bit-rate communication systems
960
Optimization of distribution piping network in district cooling system using genetic algorithm with local search
961
Optimization of distribution system design to accommodate cold load pickup
962
Optimization of Disturbance Rejection in Systems with Saturating Actuators
963
Optimization of d-lactic acid production by Lactobacillus coryniformis using response surface methodology Original Research Article
964
Optimization of DNA counterstaining for methylation and hydroxymethylation immunostaining in bovine zygotes
965
Optimization of DNA isolation and PCR parameters for RAPD analysis of Gonyostomum semen (Raphidophyceae)
966
Optimization of Dogleg Severity in Directional Drilling Oil Wells Using Particle Swarm Algorithm - Short Communication
967
Optimization of doping concentration in Er:tellurite glass based on heat analysis
968
Optimization of Dose and Image Quality in Full-fiand Computed Radiography Systems for Common Digital Radiographic Examinations
969
Optimization of Double Pipe Fin-pin Heat Exchanger using Entropy Generation Minimization
970
Optimization of double-layer absorbers on constrained sound absorption system by using genetic algorithm
971
Optimization of double-layer capacitor arrays
972
Optimization of downhole pump setting depths in liquid-dominated geothermal systems: A case study on the Balcova-Narlidere field, Turkey
973
Optimization of Drag Reducing Shark Inspired Blade-Shape Riblet Surfaces in External Flow
974
Optimization of DRASTIC method by artificial neural network, nitrate vulnerability index, and composite DRASTIC models to assess groundwater vulnerability for unconfined aquifer of Shiraz Plain, Iran
975
Optimization of DRASTIC method by supervised committee machine artificial intelligence to assess groundwater vulnerability for Maragheh–Bonab plain aquifer, Iran
976
Optimization of drawbead design in sheet metal forming based on intelligent sampling by using response surface methodology
977
Optimization of drawbead restraining forces and drawbead design in sheet metal forming process
978
Optimization of drawbead restraining forces and drawbead design in sheet metal forming process
979
Optimization of drawbead restraining forces and drawbead design in sheet metal forming process
980
Optimization of draw-in for an automotive sheet metal part: An evaluation using surrogate models and response surfaces
981
Optimization of drift gases for accuracy in pressurized drift tubes
982
Optimization of drift gases for accuracy in pressurized drift tubes
983
Optimization of drilling acceptance criteria
984
Optimization of Drilling Parameters for Delamination Associated with Pre-drill in Chopped Strand Mat Glass Fibre Reinforced Polymeric Material
985
Optimization of drilling parameters in Raniganj Formation, Essar coal bed Methane Block – A case study
986
Optimization of dry machining parameters for high-purity graphite in end milling process via design of experiments methods
987
Optimization of drying of low-grade coal with high moisture content using a disc dryer
988
Optimization of drying parameters of bird’s eye chilli in a fluidized bed dryer Original Research Article
989
Optimization of drying temperature and water extraction time of Monascus-fermented durian seed for the Monacolin K content using Response Surface Methodology
990
Optimization of DSC calibration procedure
991
Optimization of dual response systems: A comprehensive procedure for degenerate and nondegenerate problems
992
Optimization of Dy3+-doped Ge–Ga–As–S–CsBr glass composition and its 1.31 μm emission properties
993
Optimization of dye removal from aqueous Remazol Brilliant Blue R (RBBR) by Trametessp. Pellets
994
Optimization of dynamic behaviors of an orthotropic composite shell subjected to hygrothermal environment
995
Optimization of Dynamic Binding Capacity of Anion Exchange Chromatography Media for Recombinant Erythropoietin Purification
996
Optimization of Dynamic Compaction Procedure for Sandy Soils
997
Optimization of dynamic economic dispatch with valve-point effect using chaotic sequence based differential evolution algorithms
998
Optimization of dynamically bent crystals for X-ray focusing monochromators
999
Optimization of dynamically bent crystals for X-ray focusing monochromators
1000
Optimization of E. coli culture conditions for efficient DNA uptake by electroporation
