ليست عنوان مقالات لاتين Thermoelastic stresses in SiC single crystals grown by the physical vapor transport method Thermo-mechanical consequences of phase transformations in the heat-affected zone using a cyclic uniaxial test

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Thermoelastic stresses in SiC single crystals grown by the physical vapor transport method

2

THERMOELASTIC SURFACE WAVES OF AN ASSIGNED WAVELENGTH

3

Thermoelastic theory for the response of materials functionally graded in two directions

4

THERMOELASTIC TOPOLOGY OPTIMIZATION FOR PROBLEMS WITH VARYING TEMPERATURE FIELDS

5

Thermoelastic transient response of an infinitely long annular multilayered cylinder

6

Thermoelastic transient response of multilayered conical shells subjected to vapor field

7

THERMOELASTIC TRANSIENT RESPONSE OF MULTILAYERED HOLLOW CYLINDER WITH INITIAL INTERFACE PRESSURE

8

Thermoelastic Transient Response of Rotating Thick Cylindrical Shells under General Boundary Conditions

9

Thermo-elastic vibration analysis of third-order shear deformable functionally graded plates with distributed patch mass under thermal environment

10

Thermoelastic vibration and damping analysis of double-walled carbon nanotubes based on shell theory

11

Thermoelastic Vibration of Temperature-Dependent Nanobeams Due to Rectified Sine Wave Heating—A State Space Approach

12

Thermoelastic vibrations in micro-/nano-scale beam resonators with voids

13

THERMOELASTIC VIBRATIONS OF A LAMINATED RECTANGULAR PLATE SUBJECTED TO A THERMAL SHOCK

14

Thermoelastic vibrations of a transversely isotropic plate with thermal relaxations

15

Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model

16

THERMOELASTIC WAVE AND FRONT PROPAGATION

17

THERMOELASTIC WAVE IN METAL INDUCED BY ULTRAFAST LASER PULSES

18

THERMOELASTIC WAVES IN A HELIX WITH PARABOLIC OR HYPERBOLIC HEAT CONDUCTION

19

THERMOELASTIC WAVES IN A PLATE BORDERED WITH LAYERS OF INVISCID LIQUID

20

Thermoelastic waves in coated homogeneous anisotropic materials

21

Thermoelastic waves in coated homogeneous anisotropic materials

22

Thermoelastic wheel–rail contact problem with elastic graded materials

23

Thermoelasticity analysis of functionally graded beam with integrated surface piezoelectric layers

24

Thermoelasticity and CCD analysis of crack propagation in AA6082 friction stir welded joints

25

THERMOELASTICITY AND CONTACT

26

Thermoelasticity and generalized thermoelasticity viewed as wave hierarchies

27

Thermoelasticity and stress relaxation behavior of polychloroprene/organoclay nanocomposites

28

THERMOELASTICITY AND THE DESIGN OF FORCE TRANSDUCERS

29

Thermoelasticity for the evaluation of fatigue behavior of 7005/Al2O3/10p metal matrix composite sheets joined by FSW

30

THERMOELASTICITY OF AN ISOTROPIC PLATE WITH CORNER INCLUSIONS

31

THERMOELASTICITY OF AN ISOTROPIC PLATE WITH CORNER INCLUSIONS

32

Thermoelasticity of bodies with microstructure and microtemperatures

33

THERMOELASTICITY OF MULTILAYER HIGHLY ANISOTROPIC SHELLS

34

THERMOELASTICITY OF MULTILAYERED CYLINDERS

35

THERMOELASTICITY OF NONSIMPLE MATERIALS WITH THERMAL RELAXATION

36

Thermoelasticity of spatially reinforced composite plates

37

THERMOELASTICITY SOLUTION OF A LAYER USING THE GREEN-NAGHDI MODEL

38

Thermoelasticity with thermomechanical constraints

39

Thermoelasticity without energy dissipation of materials with microstructure

40

Thermo-elastic–plastic finite element analysis of wheel/rail sliding contact

41

Thermoelastodynamic disturbances in a half-space under the action of a buried thermal/mechanical line source

42

Thermo-elasto-hydrodynamic (TEHD) analysis of oil film lubrication in big end bearing of a diesel engine

43

Thermo-elasto-hydrodynamic (TEHD) analysis of oil film lubrication in big end bearing of a diesel engine

44

Thermoelastohydrodynamic analysis of the static performance of tilting-pad journal bearings with the Newton–Raphson method

45

Thermo-elasto-hydrodynamic lubrication analysis of piston skirt considering oil film inertia effect

46

Thermoelastoplastic Bending of Complexly Reinforced Plates

47

Thermoelastoplastic deformation of complexly reinforced shells

48

Thermo-elasto-plastic finite element analysis of quasi-state processes in Eulerian reference frames

49

Thermo-elasto-plastic finite element analysis of quenching process of carbon steel

50

THERMOELASTO-PLASTIC STRESSES AND THERMAL DISTORTIONS IN A BRAKE DRUM

51

Thermo-elasto-plastic stresses in functionally graded materials subjected to thermal loading taking residual stresses of the fabrication process into consideration

52

THERMO-ELASTO-PLASTIC STRESSES OF FUNCTIONALLY GRADED MATERIAL PLATE WITH A SUBSTRATE AND A COATING

53

Thermo-elasto–viscoplastic numerical model for metal casting processes

54

Thermo-elasto–viscoplastic numerical model for metal casting processes

55

Thermo-elasto–viscoplastic numerical model for metal casting processes

56

Thermoelectric air-cooling module for electronic devices

57

Thermoelectric and galvanomagnetic investigations of VI group semiconductors Se and Te at high pressure up to 30 GPa

58

Thermoelectric and magnetic properties of Ca3Co4–xCuxO9 + δ with x = 0.00, 0.05, 0.07, 0.10 and 0.15

59

Thermoelectric and mechanical properties of a hot pressed nanostructured n-type Si80Ge20 alloy

60

Thermoelectric and mechanical properties of melt spun and spark plasma sintered n-type Yb- and Ba-filled skutterudites

61

Thermoelectric and microstructural properties of Pb0.9−xSn0.1GexTe compounds prepared by spinodal decomposition

62

Thermoelectric and optical properties of CuAlO2 synthesized by direct microwave heating

63

Thermoelectric and structural properties of a new Chevrel phase: Ti0.3Mo5RuSe8

64

Thermoelectric and thermodynamic properties of half-Heulser alloy YPdSb from first principles calculations

65

Thermoelectric and Thermophysical Characteristics of Cu2Te-Tl2Te Pseudo Binary System

66

Thermoelectric and Thermophysical Properties of TiCoSb-ZrCoSb-HfCoSb Pseudo Ternary System Prepared by Spark Plasma Sintering

67

Thermoelectric automotive waste heat energy recovery using maximum power point tracking

68

Thermoelectric behavior of carbon fiber reinforced lightweight concrete with mineral admixtures

69

Thermoelectric behavior of carbon–cement composites Original Research Article

70

Thermoelectric behaviour of (Bi0.5Sb0.5)2Te3 semiconducting alloy thin films

71

Thermoelectric Ca0.9Yb0.1MnO3−δ grain growth controlled by spark plasma sintering

72

Thermoelectric carbon monoxide sensor using Co-Ce catalyst

73

Thermoelectric ceramics for generators

74

Thermoelectric characteristics of the (Bi,Sb)2(Te,Se)3 nanocomposites processed with nanoparticle dispersion

75

Thermoelectric characterization of NaxMx/2Ti1−x/2O2 (M=Co, Ni and Fe) polycrystalline materials

76

Thermoelectric Characterization of Thallium Gallium Disulphide, TlGaS2

77

Thermoelectric cold-chain chests for storing/transporting vaccines in remote regions

78

Thermoelectric cooler application in electronic cooling

79

Thermoelectric cooling of a train carriage by using a coldness-recovery device

80

Thermoelectric cooling of microelectronic circuits and waste heat electrical power generation in a desktop personal computer

81

Thermoelectric crystals Bi2Te2.88Se0.12 undoped and doped by CdCl2 or CdBr2 impurities, fabricated and characterized by XRD and Hall effect

82

Thermoelectric current and Coulomb-blockade plateaus in a quantum dot

83

Thermoelectric Effect as Waste Heat Recovery Technology

84

Thermoelectric effect in a bi-layer system

85

Thermoelectric Effect on Potato Tuber (Solanum tuberosum L.) – Short Communication

86

Thermoelectric effects and size dependency of the figure-of-merit in cylindrical nanowires

87

Thermoelectric effects in a double quantum dot system weakly coupled to ferromagnetic leads

88

Thermoelectric effects in ion conducting membranes and perspectives for thermoelectric energy conversion

89

Thermoelectric effects in layered conductors in a strong magnetic field

90

Thermoelectric effects in organic conductors in a strong magnetic field

91

Thermoelectric energy harvesting from diurnal heat flow in the upper soil layer

92

Thermoelectric field effects in low-dimensional structure solar cells

93

Thermoelectric figure of merit of -(EDO-S,S-DMEDT-TTF)2(AuBr2)1+y, () and (TMTSF)2PF6

94

Thermoelectric figure-of-merit of iodine-doped copolymer of phenylenevinylene with dialkoxyphenylenevinylene

95

Thermoelectric gas sensor with CO combustion catalyst for ppm level carbon monoxide detection

96

Thermoelectric generation device based on p-type Bi0.4Sb1.6Te3 and n-type Bi2Se0.6Te2.4 bulk materials prepared by solid state microwave synthesis

97

Thermoelectric generator based on a bismuth-telluride alloy fabricated by addition of ethylene glycol

98

Thermoelectric generator sandwiched in a crossflow heat exchanger with optimal connectivity between modules

99

Thermoelectric generators for efficiency improvement of power generation by motor generators – Environmental and economic perspectives

100

Thermoelectric hydrogen sensor working at room temperature prepared by bismuth–telluride P–N couples and Pt/γ-Al2O3

101

Thermoelectric microfluidic sensor for bio-chemical applications

102

Thermoelectric microsensor for pressure and gas concentration measurement

103

Thermoelectric oxide NaCo2O4 nanofibers fabricated by electrospinning

104

Thermoelectric performance of bilayer and multilayer SnSe/Bi2Te3 thin films prepared by physical vapor deposition

105

Thermoelectric performance of ternary Bi–Sb–Ag alloys prepared by mechanical alloying and subsequent pressureless sintering Original Research Article

106

Thermoelectric Performances of Different Types of Polyselenophene and its Copolymers with 3-Methylthiophene via Electropolymerization

107

Thermoelectric power (TEP) of semiconducting CoO–NiO–P2O5 glasses

108

Thermoelectric power and low-field electron mobility in AlxGa1-xN lattice-matched to GaN

109

Thermoelectric power and phase transition of polycrystalline As2Te3 under pressure Original Research Article

110

Thermoelectric power and phase transitions in lanthanides under pressure up to 20 GPa

111

Thermoelectric power and Raman spectra of (Me2DCNQI)2CuxLi1−x

112

Thermoelectric power characterization of a 2024 aluminum alloy during solution treatment and aging

113

Thermoelectric power generation in a thermoacoustic refrigerator

114

Thermoelectric power generation using doped MWCNTs Original Research Article

115

Thermoelectric power generation using Li-doped NiO and (Ba, Sr)PbO3 module

116

Thermoelectric power in normal state of superconductor MgB2

117

Thermoelectric power measurements in highly conductive stretch-oriented polyaniline films

118

Thermoelectric power measurements of co-evaporated Cu/GeO2 thin cermet films

119

Thermoelectric power of Al–Y–Ni amorphous alloys

120

Thermoelectric power of anisotropic electron system in quasi-one-dimensional organic conductors

121

Thermoelectric power of Ce-based intermediate valent systems

122

Thermoelectric power of CuCrxVySe4 p-type spinel semiconductors Original Research Article

123

Thermoelectric power of delafossite-type metallic oxide PdCoO2

124

Thermoelectric power of doped polyaniline near the metal-insulator transition

125

Thermoelectric power of Gd-doped CeO2 (Gd0.1Ce0.9O(2 − δ) (GDC10)): Measurements on porous samples

126

Thermoelectric power of Hg-based superconductor

127

Thermoelectric power of Kondo insulators Original Research Article

128

Thermoelectric Power of Layered Chalcogenides GaTe Crystals

129

Thermoelectric power of metallic Rb_3 C_60: phonon-drag and carrier diffusion contributions

130

Thermoelectric power of nickel and ytterbium at high pressure: a comparative study

131

Thermoelectric power of proton conducting oxides

132

Thermoelectric power of samarium substituted Y1−xSmxBa2Cu3O7−δ superconducting pellets

133

Thermoelectric power of titanate and ferrite with the cubic perovskite structure

134

Thermoelectric Power Stability of the polyparaphenylene implanted with Cesium ions.

135

Thermoelectric power studies of cerium substituted Mn–Zn ferrites

136

Thermoelectric power studies of ferromagnet U2ScB6C3

137

Thermoelectric power, magnetoresistance of lead chalcogenides in the region of phase transitions under pressure

138

Thermoelectric Powers of Cells With NaF-AIF3-Al2O3 Melts

139

Thermoelectric Properties (Resistivity and Thermopower) in (Bi1.5Pb0.5Ca2-xMxCo2O8-delta (M=Sc3+, Y3+, or La3+)

140

Thermoelectric properties and crystal structure of ternary compounds in the Ge(Sn,Pb)Te–Bi2Te3 systems Original Research Article

141

Thermoelectric properties and defect structure of La0.45Nd0.45Sr0.1FeO3−δ

142

Thermoelectric properties and electronic structure of Al-doped ZnO

143

Thermoelectric properties and electronic structure of Te-doped CoSb3 compounds

144

Thermoelectric properties and ferromagnetism of diluted magnetic semiconductors Sb2 − x Cr x Te3

145

Thermoelectric properties and figure of merit of perovskite-type Ba1−xLaxSnO3 with x=0.002–0.008

146

Thermoelectric properties and impedance spectroscopy of polycrystalline samples of the beta-gallia rutile intergrowth, (Ga,In)4(Sn,Ti)5O16

147

Thermoelectric properties and micro-structure characteristics of annealed N-type bismuth telluride thin film

148

Thermoelectric properties and microstructure of Mg3Sb2

149

Thermoelectric properties and nonstoichiometry of GaGeTe

150

Thermoelectric properties and structural instability of type-I clathrate Ba8Ga16Sn30 at high temperatures

151

Thermoelectric properties in double-filled skutterudites InxNdyCo4Sb12

152

Thermoelectric properties in Mn-doped Bi2Se3

153

Thermoelectric properties of Ag-doped bismuth sulfide polycrystals prepared by mechanical alloying and spark plasma sintering

154

Thermoelectric properties of Ag-doped n-type (Bi2Te3)0.9–(Bi2−xAgxSe3)0.1 (x=0–0.4) alloys prepared by spark plasma sintering

155

Thermoelectric properties of Al-based icosahedral quasicrystals

156

Thermoelectric properties of alkaline earth ruthenates prepared by SPS

157

Thermoelectric Properties of Alternatively Layered Films of Polyaniline and (±)-10-Camphorsulfonic Acid-Doped Polyaniline

158

Thermoelectric properties of Bi0.9Sb0.1 prepared by high pressure Original Research Article

159

Thermoelectric properties of Bi2O2Se

160

Thermoelectric properties of Bi2Te3, Sb2Te3 and Bi2Se3 single crystals with magnetic impurities

161

Thermoelectric properties of Bi–Sb semiconducting alloys prepared by quenching and annealing Original Research Article

162

Thermoelectric properties of bismuth telluride quantum wires

163

Thermoelectric properties of bismuth-selenide films with controlled morphology and texture grown using pulsed laser deposition

164

Thermoelectric Properties of Boron and Boron Phosphide Films

165

Thermoelectric properties of Ca2.8Cu0.2Co4O9 ceramics fabricated by solution combustion method

166

Thermoelectric properties of Ca2.95Bi0.05Co4−xFexO9+δ (0 ⩽ x ⩽ 0.15)

167

Thermoelectric properties of Ca3−xEuxCo4O9+δ (0≤x≤0.1)

168

Thermoelectric properties of Ca3−xYxCo4O9+δ ceramics Original Research Article

169

Thermoelectric properties of CeAl3 prepared by hot-press method

170

Thermoelectric Properties of Cesium–Graphite Intercalation Compounds

171

Thermoelectric properties of Cu-added Zn–Sb based alloys with multi-phase equilibrium

172

Thermoelectric properties of CuAlO2

173

Thermoelectric properties of Cu-doped n-type (Bi2Te3)0.9–(Bi2−xCuxSe3)0.1(x=0–0.2) alloys

174

Thermoelectric properties of Cu-Sn-S

175

Thermoelectric properties of CuyBixSb2−x−yTe3 alloys fabricated by mechanical alloying and spark plasma sintering

176

Thermoelectric properties of Fe0.2Co3.8Sb12−xTex skutterudites

177

Thermoelectric properties of FeVSb half-Heusler compounds by levitation melting and spark plasma sintering

178

Thermoelectric properties of fine-grained FeVSb half-Heusler alloys tuned to p-type by substituting vanadium with titanium

179

Thermoelectric properties of Gd, Y co-doped Ca3Co4O9+δ

180

Thermoelectric properties of Ge-doped Bi85Sb15 alloys at low temperatures Original Research Article

181

Thermoelectric properties of graphene nanosheets-modified polyaniline hybrid nanocomposites by an in situ chemical polymerization

182

Thermoelectric properties of highly textured NaCo2O4 ceramics processed by the reactive templated grain growth (RTGG) method

183

Thermoelectric properties of homologous p- and n-type boron-rich borides

184

Thermoelectric properties of hot-pressed n-type Bi2Te2.85Se0.15 compounds doped with SbI3

185

Thermoelectric properties of hot-pressed n-type Bi2Te2.85Se0.15 compounds doped with SbI3

186

Thermoelectric properties of HPHT sintered In-doped Pb0.5Sn0.5Te

187

Thermoelectric properties of hydrothermally synthesized and hot pressed n-type Bi2Te3 alloys with different contents of Te

188

Thermoelectric properties of image prepared by CS2 sulfurization Original Research Article

189

Thermoelectric properties of InzCo4Sb12−yTey skutterudites

190

Thermoelectric properties of La-doped Ca–Co–O misfit cobaltites

191

Thermoelectric properties of LaFe3CoSb12 skutterudite materials with different nanostructures

192

Thermoelectric properties of layered Ca3.95RE0.05Mn3O10 compounds (RE = Ce, Nd, Sm, Eu, Gd, Dy)

193

Thermoelectric properties of Li2PbGeS4 polar chalcopyrites single crystals as photovoltaic candidate

194

Thermoelectric properties of mesoporous TiO2 thin films through annealing temperature and ratio of surfactant

195

Thermoelectric properties of metal/molecule/metal junction for different lengths of polythiophene

196

Thermoelectric Properties of Metal-Doped beta-Rhombohedral Boron

197

Thermoelectric properties of MeV Si ion bombarded Bi2Te3/Sb2Te3 superlattice deposited by magnetron sputtering

198

Thermoelectric properties of newly fabricated n-type 95%Bi2Te2–5%Bi2Se3 alloys by gas atomizing and extrusion process

199

Thermoelectric Properties of Non-Stoichiometric Titanium Dioxide TiO2-x Fabricated by Reduction Treatment Using Carbon Powder

200

Thermoelectric properties of novel skutterudites with didymium: DDy(Fe1−xCox)4Sb12 and DDy(Fe1−xNix)4Sb12

201

Thermoelectric properties of n-type 95%Bi2Te3–5%Bi2Se3 materials fabricated by magnetic pulsed compaction (MPC)

202

Thermoelectric properties of n-type Bi–Te thin films with deposition conditions using RF magnetron co-sputtering

203

Thermoelectric properties of PbTe1−xSex alloys prepared by high pressure Original Research Article

204

Thermoelectric properties of perovskite oxides La1-xSrxCoO3 prepared by polymerlized complex method

205

Thermoelectric properties of perovskites: Sign change of the Seebeck coefficient and high temperature properties

206

Thermoelectric properties of perovskite-type oxide La1−xSrxCoO3 (x = 0, 0.1) prepared by solid state reactions

207

Thermoelectric properties of polycrystalline La1−xSrxCoO3

208

Thermoelectric properties of porous SiC/C composites

209

Thermoelectric properties of porous zinc oxide ceramics doped with praseodymium

210

Thermoelectric properties of p-type (Bi,Sb)2Te3 nanocomposites dispersed with multiwall carbon nanotubes

211

Thermoelectric properties of p-type (Bi2Te3)x(Sb2Te3)1−x prepared by spark plasma sintering

212

Thermoelectric properties of p-type 25%Bi2Te3+75%Sb2Te3 alloys manufactured by rapid solidification and hot pressing

213

Thermoelectric properties of p-type antimony bismuth telluride alloys prepared by cold pressing

214

Thermoelectric properties of p-type Bi0.5Sb1.5Te3 for solid-state cooling devices

215

Thermoelectric properties of p-type pseudo-binary (Ag0.365Sb0.558Te)x–(Bi0.5Sb1.5Te3)1−x (x=0–1.0) alloys prepared by spark plasma sintering

216

Thermoelectric properties of p-type skutterudites YbxFe3.5Ni0.5Sb12 (0.8 ⩽ x ⩽ 1) Original Research Article

217

Thermoelectric properties of p-type Te doped Bi0.5Sb1.5Te3 fabricated by powder extrusion

218

Thermoelectric properties of P-type Yb-filled skutterudite YbxFeyCo4-ySb12

219

Thermoelectric properties of p-type YbxLayFe2.7Co1.3Sb12 double-filled skutterudites

220

Thermoelectric properties of Re6GaxSeyTe15−y (0 ≤ x ≤ 2; 0 ≤ y ≤ 7.5)

221

Thermoelectric properties of Rh-doped Ru2Si3 prepared by floating zone melting method

222

Thermoelectric properties of Sb-doped Mg2Si semiconductors

223

Thermoelectric properties of SiC/C composites from wood charcoal by pulse current sintering

224

Thermoelectric properties of small diameter carbon nanowires Original Research Article

225

Thermoelectric properties of SnzCo8Sb24 skutterudites

226

Thermoelectric Properties of Solution Grown (beta)-FeSi2 Single Crystals

227

Thermoelectric properties of Sr0.9La0.1TiO3 and Sr2.7La0.3Ti2O7 with 15% Ag addition

228

Thermoelectric properties of ternary and Al-containing quaternary Ru1−xRexSiy chimney–ladder compounds Original Research Article

229

Thermoelectric properties of ternary transition metal antimonides

230

Thermoelectric properties of the AA′3B4O12-type ordered perovskite oxides

231

Thermoelectric properties of the Bi2−xYxRu2O7 (x=0–2) pyrochlores

232

Thermoelectric properties of the new tellurides SrSc2Te4 and BaSc2Te4 in comparison to BaY2Te4

233

Thermoelectric properties of the p-type Bi2Te3–Sb2Te3–Sb2Se3 alloys fabricated by mechanical alloying and hot pressing Original Research Article

234

Thermoelectric properties of the Ru2Ni2Sb12 ternary skutterudite

235

Thermoelectric properties of the solid solutions BaPb1−xSbxO3 (x=0–0.4)

236

Thermoelectric properties of the tetradymite-type Bi2Te2S–Sb2Te2S solid solution

237

Thermoelectric properties of the welded Cu/Bi0.88 Sb0.12 /Cu composites in the temperature region from 193 K to 298 K

238

Thermoelectric properties of thermoelectric modules consisted of porous FeSi2 based compounds fabricated by pressureless sintering

239

Thermoelectric properties of thermoelectric modules consisted of porous FeSi2 based compounds fabricated by pressureless sintering

240

Thermoelectric properties of tin clathrates under hydrostatic pressure Original Research Article

241

Thermoelectric properties of UB4 from 300 to 850 K Original Research Article

242

Thermoelectric properties of uranium filled skutterudites Uy(FexCo4−x)Sb12

243

Thermoelectric properties of URu2Si2 and U2Ru3Si5

244

Thermoelectric properties of V2O5 thin films deposited by thermal evaporation

245

Thermoelectric properties of Yb-doped La0.1Sr0.9TiO3 ceramics at high temperature

246

Thermoelectric properties of YbxCo4Sb12 system

247

Thermoelectric properties of zigzag single-walled Carbon nanotubes and zigzag single-walled Boron Nitride nanotubes (9, 0)

248

Thermoelectric properties of Zn4Sb3 intermetallic compound doped with Aluminum and Silver

249

Thermoelectric properties of Zn4Sb3 prepared by hot pressing

250

Thermoelectric properties of Zn4Sb3 processed by sintering of cold pressed compacts and hot pressing

251

Thermoelectric properties optimization of Al-doped ZnO thin films prepared by reactive sputtering Zn–Al alloy target

252

Thermoelectric property of PbTe coating on copper and nickel

253

Thermoelectric response of carbon nanotube films to Au-nanoparticle incorporation

254

Thermoelectric spin diffusion in a ferromagnetic metal

255

Thermoelectric studies of oligophenylenevinylene segmented block copolymers and their blends with MEH-PPV

256

Thermoelectric topping cycles for power plants to eliminate cooling water consumption

257

Thermoelectric transformation and illuminative performance analysis of a novel LED-MGVC device

258

Thermoelectric transport and structural changes in charge-density-wave system (NbSe4)10I3

259

Thermoelectric transport properties in disordered systems near the Anderson transition

260

Thermoelectric transport properties of boron-doped nanocrystalline diamond foils

261

Thermoelectric transport properties of polycrystalline titanium diselenide co-intercalated with nickel and titanium using spark plasma sintering

262

Thermoelectric transport properties through a T-shaped single quantum dot

263

Thermoelectric triggering of phase transformations in Ni–Ti shape memory alloy

264

Thermoelectric triggering of phase transformations in Ni–Ti shape memory alloy

265

Thermoelectric water-cooling device applied to electronic equipment

266

Thermoelectric, electronic, optical and chemical bonding properties of Ba2PrRuO6: At temperature 7 K and 150 K

267

Thermoelectrical and thermal analyses of copper(II) acetate monohydrate ZnO–matrix composite powder obtained by freeze-drying

268

Thermo-electrical characterization of Sn–Zn alloys

269

Thermo-electrical instabilities arising in proton exchange membrane of fuel cell

270

Thermoelectrical power analysis of precipitation in 6013 aluminum alloy

271

Thermoelectrical properties and memory switch phenomenon in amorphous Ge46S54 films

272

Thermoelectrical properties and optical third harmonic generation of Gd-doped PbTe

273

Thermo-electrical properties of nanostructured ballistic nanowires in the R-matrix formalism using the Implicitly Restarted Arnoldi Method

274

Thermo-electrical properties of PVA–nanotube composite fibers

275

Thermoelectrically cooled semiconductor detectors for non-destructive analysis of works of art by means of energy dispersive X-ray fluorescence

276

Thermoelectrically cooled semiconductor detectors for non-destructive analysis of works of art by means of energy dispersive X-ray fluorescence

277

Thermoelectric-generator with linear phenomenological heat-transfer law

278

Thermoelectric-hydraulic performance of a multistage integrated thermoelectric power generator

279

Thermoelectricity analogy method for computing the periodic heat transfer in external building envelopes

280

Thermoelectricity analogy method for computing the periodic heat transfer in external building envelopes

281

Thermoelectrics: a review of present and potential applications

282

Thermo-Electro Mechanical Impedance based Structural Health Monitoring: Euler- Bernoulli Beam Modeling

283

Thermo-Electro Mechanical Impedance based Structural Health Monitoring: Euler-Bernoulli Beam Modeling

284

Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell

285

Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode

286

Thermoelectrochemical study of silver electrodeposition from nitric and tartaric solutions

287

Thermoelectroelastic analysis of cracks in piezoelectric half-plane by BEM

288

Thermoelectroelastic solution for elliptic inclusions and application to crack–inclusion problems

289

Thermoelectroelastic solutions for surface bone remodeling under axial and transverse loads

290

Thermo-electro-elastic transient responses in piezoelectric hollow structures

291

Thermo-electro-mechanical contact behavior of a finite piezoelectric layer under a sliding punch with frictional heat generation

292

Thermo-electro-mechanical impedance based structural health monitoring of plates

293

Thermoelectromechanical Response of a Center Crack in a Symmetrical Functionally Graded Piezoelectric Strip

294

Thermo-electro-mechanical vibration of coupled piezoelectric-nanoplate systems under non-uniform voltage distribution embedded in Pasternak elastic medium

295

Thermo-electro-mechanical vibration of piezoelectric nanoplates based on the nonlocal theory

296

Thermo-electro-mechanical vibration of size-dependent piezoelectric cylindrical nanoshells under various boundary conditions

297

Thermoelectromotive force in nanocrystalline wires

298

Thermoelectromotive force of amorphous magnetic Fe-Cu-Nb-Si-B, Fe-Hf-B and Fe-Zr-B ribbons during the crystallization process

299

Thermoelectromotive force of amorphous magnetic Fe-Cu-Nb-Si-B, Fe-Hf-B and Fe-Zr-B ribbons during the crystallization process

300

Thermoemissional charging of a spherical sedimentary particle

301

THERMO-ENVIRONMENTAL ANALYSIS an‎d MULTI-OBJECTIVE OPTIMIZATION OF PERFORMANCE OF ERICSSON ENGINE IMPLEMENTING AN EVOLUTIONARY ALGORITHM

302

Thermo-environmental and economic analysis of simple and regenerative gas turbine cycles with regression modeling and optimization

303

Thermo-environmental evaluation of traditional cogenerative and fuel cell plants

304

Thermoexfoliated graphite as support for production of metal–graphite nanocomposites Original Research Article

305

Thermo-expandable metallic urethral stents for managing recurrent bulbar urethral strictures: To use or not?

306

Thermo-fatigue life evaluation of SnAgCu solder joints in flip chip assemblies

307

Thermofield dynamics and Casimir effect for fermions

308

Thermo-field dynamics and quark–hadron phase transition in QCD Original Research Article

309

Thermo-flexural analysis of thick laminates of bimodulus composite materials

310

Thermofluid analysis of free surface liquid divertor in tokamak fusion reactor

311

Thermo-Fluid Analysis on the Efficiency of Wet Compression Process

312

Thermo-fluid and electrochemical modeling of a multi-bundle IP-SOFC – Technology for second generation hybrid application

313

Thermofluid characteristics of frosted finned-tube heat exchangers

314

Thermo-fluid dynamics of Loop Heat Pipe operation

315

Thermo-fluid dynamics of several film boiling modes in He II in the pressure range between atmospheric pressure and saturated vapor pressure Original Research Article

316

Thermo-fluid dynamics preliminary design of turbo-expanders for ORC cycles

317

Thermofluid experiments on ingress of coolant event

318

Thermo-fluid investigation on a double-side-cooled annular fuel for the prismatic very high temperature gas-cooled reactor

319

Thermofluid modeling and experiments for free surface flows of low-conductivity fluid in fusion systems

320

Thermo-fluid simulation of the gas turbine performance based on the first law of thermodynamics

321

Thermo-fluid-dynamic investigation of a dryer, using numerical and experimental approach Original Research Article

322

Thermo-fluid-dynamics of a complex fluid flow

323

Thermo-fluidic characteristics of open cell metal foam as an anodes for DCFC, part I: Head loss coefficient of metal foam

324

Thermo-fluidic instabilities in cone stabilized non-premixed combustor

325

THERMO-FLUIDIC PARAMETERS EFFECTS ON NONLINEAR VIBRATION OF FLUIDCONVEYING NANOTUBE RESTING ON ELASTIC FOUNDATIONS USING HOMOTOPY PERTURBATION METHOD

326

Thermofluidics and energetics of a manifold microchannel heat sink for electronics with recovered hot water as working fluid

327

Thermofluidynamic analysis of the flow in a sharp 180° turn channel

328

Thermoforming techniques for manufacturing porous scaffolds for application in 3D cell cultivation

329

Thermoforming woodfibre–polypropylene composite sheets

330

Thermoforming woodfibre–polypropylene composite sheets

331

Thermogelation of Al2O3/Y-TZP films produced by electrophoretic co-deposition

332

Thermogelation properties of methylcellulose (MC) and their effect on a batter formula

333

Thermogelling behaviour of starches to be used in ceramic consolidation processes

334

Thermogelling polymers composed of poly(cyclohexylenedimethylene adipate) and poly(ethylene glycol)

335

Thermogelling polysaccharides for aqueous gelcasting—part I: a comparative study of gelling additives

336

Thermogelling polysaccharides for aqueous gelcasting—part II: influence of gelling additives on rheological properties and gelcasting of alumina

337

Thermogelling polysaccharides for aqueous gelcasting—part III: mechanical and microstructural characterization of green alumina bodies

338

Thermogel-mediated sustained drug delivery for in situ malignancy chemotherapy

339

Thermogenesis challenges the adipostat hypothesis for body-weight control

340

Thermogenesis induced by a high-carbohydrate meal in fasted lean and overweight young men:: insulin, body fat, and sympathetic nervous system involvement

341

Thermogenesis is involved in the body-fat lowering effects of resveratrol in rats

342

Thermogenic gas hydrates and hydrocarbon gases in complex chemosynthetic communities, Gulf of Mexico continental slope

343

Thermogenic hydrocarbons from the offshore Calypso hydrothermal field, Bay of Plenty, New Zealand

344

Thermogenic organic matter dissolved in the abyssal ocean

345

Thermograms of damages

346

Thermographic analysis and modelling of the delamination crack growth in a thermal barrier coating on Fecralloy substrate

347

Thermographic analysis in ultrasonic fatigue tests

348

Thermographic analysis of a building integrated photovoltaic system

349

Thermographic Analysis of Fatigue Dissipation Properties of Steel Sheets

350

Thermographic analysis of flow distribution in compact heat exchangers for a Formula 1 car

351

Thermographic analysis of polyurethane foams integrated with phase change materials designed for dynamic thermal insulation in refrigerated transport

352

Thermographic analysis of tooth vascularization using thermal stimulation

353

Thermographic assessment of dentine pin placement

354

Thermographic Assessment of Saddles Used on Jumping Horses

355

Thermographic assessment of skin prick tests in comparison with the routine evaluation methods

356

Thermographic Eye Temperature as an Index to Body Temperature in Ponies

357

Thermographic inspection of TBC coated gas turbine blades: Discrimination between coating over-thicknesses and adhesion defects

358

Thermographic investigation of contemporary resin-containing dental materials

359

Thermographic investigation of the fatigue behavior of reactor pressure vessel steels

360

Thermographic investigation of the fatigue behavior of reactor pressure vessel steels

361

Thermographic measurement of canopy temperature is a useful tool for predicting water deficit effects on fruit weight in citrus trees

362

Thermographic measurement of temperature change during resin composite polymerization in vivo

363

Thermographic measurement of the effect of humidity in mortar porosity

364

Thermographic method for evaluation of thermal influence of Nd:YAG laser on a tooth root during sterilization process

365

Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components

366

Thermographic observation of the divertor target plates in the stellarators W7-AS and W7-X

367

Thermographic power accounting in MAST

368

Thermographic signal reconstruction for vibrothermography

369

Thermographic studies of plastered mosaics

370

Thermographic studies of temperature evolutions in bulk metallic glasses: An overview

371

Thermographic studies on IMI-834 titanium alloy during tensile loading

372

Thermographic study of energetic installations

373

Thermographic study of the preheating plugs in diesel engines

374

Thermographic surface quality evaluation of apple Original Research Article

375

Thermographic survey of two rural buildings in Spain

376

Thermographic visualization of leaf response in cucumber plants infected with the soil-borne pathogen Fusarium oxysporum f. sp. cucumerinum

377

Thermographic visualization of the superficial vein and extravasation using the temperature gradient produced by the injected materials

378

Thermographical observation of catalyst bed temperature in oxidative steam reforming of methane over Ni supported on α-alumina granules: Effect of Ni precursors

379

Thermography analyses of the hole-drilling residual stress measuring technique

380

Thermography and the possibilities for its applications in clinical and experimental dermatology

381

Thermography and ultrasonography in back pain diagnosis of equine athletes

382

Thermography as a technique for monitoring early age temperatures of hardening concrete

383

Thermography as a tool for damage assessment

384

Thermography of target plates with near-infrared optical fibres at Tore Supra

385

Thermography study of propane oxidation to synthesis-gas over nickel

386

Thermography-Based Investigation into Thermally Induced Positioning Errors of Feed Drives By Example of a Ball Screw

387

Thermogravimetric analyses and catalytic behaviors of zirconia-supported nickel catalysts for carbon dioxide reforming of methane

388

Thermogravimetric analyses of combustion of lignocellulosic materials in N2/O2 and CO2/O2 atmospheres

389

Thermogravimetric analysis — a powerful tool for the refinement of the synthesis process of Hg-based superconductors

390

Thermogravimetric Analysis (TGA) and Differential Scanning Calometric (DSC) Analysis of Pineapple Leaf Fibre (PALF) Reinforced High Impact Polystyrene (HIPS) Composites

391

Thermogravimetric analysis and emission characteristics of two energy crops in air atmosphere: Arundo donax and Miscanthus giganthus

392

Thermogravimetric analysis and fast pyrolysis of Milkweed

393

Thermogravimetric analysis and kinetic study of 1-amino-1,2,3-triazolium nitrate

394

Thermogravimetric analysis and kinetic study of poplar wood pyrolysis

395

Thermogravimetric analysis and kinetic study on pyrolysis of representative medical waste composition

396

Thermogravimetric analysis and kinetics modeling of isothermal carbonization of olive wood in inert atmosphere

397

Thermogravimetric analysis and kinetics of coal/plastic blends during co-pyrolysis in nitrogen atmosphere

398

Thermogravimetric analysis and kinetics of co-pyrolysis of raw/torrefied wood and coal blends

399

Thermogravimetric analysis and TEM characterization of the oxidation and defect sites of carbon nanotubes synthesized by CVD of methane

400

Thermogravimetric analysis as a new method to determine the lignocellulosic composition of biomass

401

Thermogravimetric analysis during the decomposition of cotton fabrics in an inert and air environment

402

Thermogravimetric Analysis of Activated Sludge Flocculated with Polyelectrolyte

403

Thermogravimetric analysis of anthracite and waste plastics by iso-conversional method

404

Thermogravimetric analysis of brown coals and also humic acids as well as their extracted bitumens in the Circumpolar Urals

405

Thermogravimetric analysis of carbon black and engine soot—Towards a more robust oil analysis method

406

Thermogravimetric analysis of developing cotton fibers

407

Thermogravimetric analysis of forest understory grasses

408

Thermogravimetric analysis of fungus-degraded lime wood

409

Thermogravimetric analysis of fungus-degraded lime wood

410

Thermogravimetric analysis of giant sensitive plants under air atmosphere

411

Thermogravimetric analysis of lignocellulosic biomass with ionic liquid pretreatment

412

Thermogravimetric analysis of limestones with different contents of MgO and microstructural characterization in oxy-combustion

413

Thermogravimetric analysis of liquid crystal–polymer blends

414

Thermogravimetric analysis of Mediterranean plant species

415

Thermogravimetric analysis of microalgae combustion under different oxygen supply concentrations

416

Thermogravimetric Analysis of Modified Montmorillonite Clay for Mycotoxin Decontamination in Cereal Grains

417

Thermogravimetric analysis of olive stones with sulphuric acid treatment

418

Thermogravimetric analysis of olive-oil residue in air atmosphere

419

Thermogravimetric analysis of organic binder segregation during drying of particulate suspensions

420

THERMOGRAVIMETRIC ANALYSIS OF PALM OIL WASTES DECOMPOSITION

421

Thermogravimetric analysis of perennial ryegrass: relationship between dry matter digestibility and thermal profiles

422

Thermogravimetric analysis of petroleum asphaltenes along with estimation of average chemical structure by nuclear magnetic resonance spectroscopy

423

Thermogravimetric analysis of poly(ε-caprolactam) and poly[(ε-caprolactam)-co-(ε-caprolactone)] polymers

424

Thermogravimetric analysis of rice and wheat straw catalytic combustion in air- and oxygen-enriched atmospheres

425

Thermogravimetric analysis of selected coal-bearing strata kaolinite

426

Thermogravimetric analysis of single-wall carbon nanotubes ultrasonicated in monochlorobenzene

427

Thermogravimetric analysis of soot emitted by a modern diesel engine run on catalyst-doped fuel

428

Thermogravimetric analysis of SPEEK membranes: Thermal stability, degree of sulfonation and cross-linking reaction

429

Thermogravimetric analysis of SPEEK membranes: Thermal stability, degree of sulfonation and cross-linking reaction

430

Thermogravimetric analysis of the beryllium/steam reaction

431

Thermogravimetric analysis of the co-combustion of coal and paper mill sludge

432

Thermogravimetric analysis of the co-combustion of coal and sewage sludge

433

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

434

Thermogravimetric analysis of the combustion of microalgae and microalgae blended with waste in N2/O2 and CO2/O2 atmospheres

435

Thermogravimetric analysis of the decomposition characteristics of two kinds of calcium based organic compounds

436

Thermogravimetric Analysis of the Fuel Properties of Empty Fruit Bunch Briquettes

437

Thermogravimetric analysis of the hydrolysis of zinc particles

438

Thermogravimetric analysis of the relationship among calcium magnesium acetate, calcium acetate and magnesium acetate

439

Thermogravimetric analysis of the thermal decomposition of MSW in N2, CO2 and CO2/N2 atmospheres

440

Thermogravimetric analysis of the ZnO/Zn water splitting cycle

441

Thermogravimetric analysis of water release from wheat flour and wheat bran suspensions Original Research Article

442

Thermogravimetric analysis, PXRD, EDX and XPS study of chrysocolla (Cu,Al)2H2Si2O5(OH)4·nH2O-structural implications

443

Thermogravimetric analysis–mass spectrometry (TG–MS) of selected Chinese kaolinites

444

Thermogravimetric analysis-mass spectrometry (TG-MS) of selected Chinese palygorskites—Implications for structural water

445

Thermogravimetric and adsorption studies of oxidized active carbons by using different probe molecules

446

Thermogravimetric and calorimetric studies of water absorbed in polyaniline

447

Thermogravimetric and calorimetric study of cadmium iodide adducts with cyclic ureas

448

Thermogravimetric and decomposition kinetic studies of Mesua ferrea L. deoiled cake

449

Thermogravimetric and DSC testing of poly(lactic acid) nanocomposites

450

Thermogravimetric and FTIR studies of chitosan blends

451

Thermogravimetric and in situ SEM characterisation of the oxidation phenomena of protective nanocomposite nitride films deposited on steel

452

Thermogravimetric and kinetic analysis of Spirulina wastes under nitrogen and air atmospheres

453

Thermogravimetric and kinetic analysis of thermal decomposition characteristics of low-lipid microalgae

454

Thermogravimetric and kinetic study of Pinyon pine in the various gases

455

Thermogravimetric and Kinetic Study of Pyrolysis of Corn Cob Biomass

456

THERMOGRAVIMETRIC an‎d PYROLYSIS-CAPILLARY GAS CHROMATOGRAPHY-MASS SPECTROMETRIC ANALYSIS OF PINUS HALEPENSIS MILL. WOOD

457

Thermogravimetric and pyrolytic investigations on scrap tires

458

Thermogravimetric and pyrolytic investigations on scrap tires

459

Thermogravimetric and textural studies of modified carbonaceous materials

460

Thermogravimetric and Thermochemical Studies of Malaysian Oil Palm Shell Waste

461

Thermogravimetric and thermokinetic investigation of the dehydroxylation of a hydroxyapatite powder

462

Thermogravimetric and XRD studies on iron compounds precipitated from

463

Thermogravimetric assessment of combustion characteristics of blends of a coal with different biomass chars

464

Thermogravimetric assessment of the suitability of cyclohexa-2,5-dienecarboxylates as stabilizers for vinylidene chloride polymers

465

Thermogravimetric behavior of natural fibers reinforced polymer composites—An overview

466

Thermogravimetric characterisation of maceral concentrates of Russian coking coals

467

Thermogravimetric characteristics and combustion emissions of rubbers and polyvinyl chloride in N2/O2 and CO2/O2 atmospheres

468

Thermogravimetric characteristics and kinetic of plastic and biomass blends co-pyrolysis

469

Thermogravimetric characteristics and pyrolysis kinetics of Alga Sagarssum sp. biomass

470

Thermogravimetric characteristics of water-soluble organic matter from atmospheric aerosols collected in a rural–coastal area

471

Thermogravimetric characteristics, its relation with extractives and chemical properties and combustion characteristics of ten fast-growth species in Costa Rica

472

Thermogravimetric characterization of corn stover as gasification and pyrolysis feedstock

473

Thermogravimetric characterization of highly sulfonated poly(styrene–isobutylene–styrene) block copolymers: Effects of sulfonation and counter-ion substitution

474

Thermogravimetric characterization of sulfonated poly(styrene-isobutylene-styrene) block copolymers: effects of processing conditions

475

Thermogravimetric desorption and de novo tests I: Method development and validation Original Research Article

476

Thermogravimetric determination of coke deposits on alumina-supported noble metal catalysts used as hydrodechlorination catalysts

477

Thermogravimetric determination of coke from asphaltenes, resins and sediments and coking kinetics of heavy crude asphaltenes

478

Thermogravimetric determination of l-ascorbic acid in non-effervescent formulations using multiple linear regression with temperature selection by the successive projections algorithm

479

Thermogravimetric estimation of adsorption properties of europium-incorporated MCM-41 materials

480

Thermogravimetric evaluation of polyester/sisal flame retarded composite

481

Thermogravimetric evaluation of the specific surface area and total porosity of microporous carbons Original Research Article

482

Thermogravimetric evolved gas analysis of urea and urea solutions with nickel alumina catalyst

483

Thermogravimetric investigation of hydrochar-lignite co-combustion

484

Thermogravimetric investigation of the relation between oxygen stoichiometry, temperature and oxygen partial pressure in Nd1−xCaxMnO3+δ perovskites (x≈0.5) Original Research Article

485

Thermogravimetric investigation on characteristic of biomass combustion under the effect of organic calcium compounds

486

Thermogravimetric investigation on co-combustion characteristics of tobacco residue and high-ash anthracite coal

487

Thermogravimetric investigation on the chloride binding behaviour of MK–lime paste

488

Thermogravimetric investigation on the degradation properties and combustion performance of bio-oils

489

Thermogravimetric investigations in prediction of coking behaviour and coke properties derived from inertinite rich coals

490

Thermogravimetric investigations of carbonaceous materials—Syndiotactic polystyrene systems

491

Thermogravimetric investigations on the mechanism of decomposition of Pb compounds on a tungsten surface

492

Thermogravimetric kinetic model of the pyrolysis and combustion of an ethylene-vinyl acetate copolymer refuse

493

Thermogravimetric kinetics of corn stalk pretreated by oleaginous fungi Cunninghamella echinulata

494

Thermogravimetric kinetics of crude glycerol

495

Thermogravimetric kinetics of polyethelyne degredation over silicoaluminophosphate

496

Thermogravimetric kinetics of sugarcane bagasse pretreated by hot-water

497

Thermogravimetric measurements of the kinetics of pyrolysis of dried sewage sludge

498

Thermogravimetric Method for Accurate Determination of Thermodynamic Quantities at High Temperatures

499

Thermogravimetric monitoring of oil refinery sludge

500

Thermogravimetric monitoring of oil refinery sludge

501

Thermogravimetric monitoring of the MCM-41 synthesis

502

Thermogravimetric properties of aquatic humic substances

503

Thermogravimetric relaxation study of the proton conductor lanthanum tungstate, La28−xW4+xO54+δv2−δ, x = 0.85

504

Thermogravimetric studies of carbon nanofiber formation from methane at low temperature over Ni-based skeletal catalysts and the effect of substrate pre-carburization Original Research Article

505

Thermogravimetric studies of the behavior of lignite–biomass blends during devolatilization

506

Thermogravimetric studies of the behavior of wheat straw with added coal during combustion

507

Thermogravimetric studies on the effect of support in sorbent-materials applied to flue gas desulfurization

508

Thermogravimetric studies on the thermal decomposition of polyethylene

509

Thermogravimetric study and kinetic analysis of fungal pretreated corn stover using the distributed activation energy model

510

Thermogravimetric study in connection with the CO2-reforming reaction of CH4

511

Thermogravimetric study of biomass, sewage sludge and coal combustion

512

Thermogravimetric study of different sewage sludges and their relationship with the nitrogen content

513

Thermogravimetric study of GaAs chlorination between −30 and 900 °C

514

Thermogravimetric study of high temperature treatment of aspen: effect of treatment parameters on weight loss and mechanical properties

515

Thermogravimetric study of interactions in the pyrolysis of blends of coal with radiata pine sawdust

516

Thermogravimetric Study of MHgO2 (M=Ca, Sr, Ba) under Controlled Oxygen and Mercury Partial Pressures and Related Thermodynamics

517

Thermogravimetric study of some crosslinked copolymers based on poly(acrylonitrile-co-divinylbenzene)

518

Thermogravimetric study of starch derivatives with amine/ammonium ion-exchanging groups in oxidative environment

519

Thermogravimetric study of the combustion of Tetraselmis suecica microalgae and its blend with a Victorian brown coal in O2/N2 and O2/CO2 atmospheres

520

Thermogravimetric study of the decomposition of printed circuit boards from mobile phones

521

Thermogravimetric study of the decomposition of printed circuit boards from mobile phones

522

Thermogravimetric study of the kinetics of Co3O4 reduction by hydrogen

523

Thermogravimetric study of the kinetics of degradation of polypropylene with solid catalysts

524

Thermogravimetric study of the kinetics of lithium titanate reduction by hydrogen

525

Thermogravimetric Study of the Ln2O3–Co–Co2O3 System. VI: Ln=Pr at 1100 and 1150°C

526

Thermogravimetric study of the pyrolysis characteristics and kinetics of coal blends with corn and sugarcane residues

527

Thermogravimetric study of the pyrolysis of biomass residues from tomato processing industry

528

Thermogravimetric study of the pyrolysis of tobacco and several ingredients used in the fabrication of commercial cigarettes: Effect of the presence of MCM-41

529

Thermogravimetric study of the sulfurization of SrTiO3 nanoparticles using CS2

530

Thermogravimetric study of the sulfurization of TiO2 nanoparticles using CS2 and the decomposition of their sulfurized product

531

Thermogravimetric study of ultrathin PMMA films on silica: effect of tacticity

532

Thermogravimetric study of vapor pressure of TATP synthesized without recrystallization

533

Thermogravimetric study of water-based LiFePO4 composite electrode powders

534

Thermogravimetric Study on Oxygen Adsorption/Desorption Properties of Double Perovskite Structure Oxides REBaCo2 O5+δ (RE = Pr, Gd, Y)

535

Thermogravimetric study on perovskite-like oxygen permeation ceramic membranes

536

Thermogravimetric study on pyrolysis kinetics of Chlorella pyrenoidosa and bloom-forming cyanobacteria

537

Thermogravimetric study on pyrolysis of biomass with Cu/Al2O3 catalysts

538

Thermogravimetric study on stem biomass of Nicotiana tabacum

539

Thermogravimetric study on the hydration of reactive magnesia and silica mixture at room temperature

540

Thermogravimetric study on the pressurized hydropyrolysis kinetics of a lignite coal

541

Thermogravimetric study on the pyrolysis kinetics of apple pomace as waste biomass

542

Thermogravimetric study on the steam activation of charcoals obtained by vacuum and atmospheric pyrolysis of softwood bark residues Original Research Article

543

THERMOGRAVIMETRIC, MICROSCOPIC AND MECHANICAL ANALYSES OF PBT AND PET YARNS

544

Thermogravimetric/mass spectrometric characterization of two energy crops, Arundo donax and Miscanthus sinensis

545

Thermogravimetrical investigations of the dealkoxycarbonylation of N-acyl-α-triphenylphosphonioglycinates

546

Thermogravimetric-Fourier transform infrared spectrometric analysis of CO2 gasification of reed (Phragmites australis) kraft black liquor

547

Thermogravimetric–mass spectrometric analysis of lignocellulosic and marine biomass pyrolysis

548

Thermogravimetric-mass spectrometric analysis on combustion of lignocellulosic biomass

549

Thermogravimetric–mass spectrometric study on the evolution of nitrogen compounds during coal devolatilisation

550

Thermogravimetry (TG) applied to the study of the reaction of mercury with platinum–rhodium alloy

551

Thermogravimetry- and differential scanning calorimetry-based studies of the solid state reactions of starch polysaccharides with proteogenic amino acids

552

Thermogravimetry and evolved gas analysis of polyimide

553

Thermogravimetry and Py–GC/MS techniques as fast qualitative methods for comparing the biochemical composition of Nannochloropsis oculata samples obtained under different culture conditions

554

Thermogravimetry and pyrolysis—GC of chlorophyll-a: with a special emphasis on thermal behavior of its phytyl chain

555

Thermogravimetry and Viscometry for Assessing the Ester Content (FAME and FAEE)

556

Thermogravimetry and X-ray diffraction study of the thermal decomposition processes in Li2CO3–MnCO3 mixtures

557

Thermogravimetry as a technique for establishing the stabilization progress of sludge from wastewater treatment plants

558

Thermogravimetry as a tool to classify waste components to be used for energy generation

559

Thermogravimetry of heteroleptic zinc tri-tert-butoxysilanethiolates: synthesis and crystal structure of bis(tri-tert-butoxysilanethiolato)(pyridine) zinc(II)

560

Thermogravimetry study of xylanase- and laccase/mediator-treated eucalyptus pulp fibres

561

Thermogravimetry/mass spectrometry of urease-immobilized sol–gel silica and the application of such a urease-modified electrode to the potentiometric determination of urea Original Research Article

562

Thermogravimetry/mass spectrometry study of six lignins within the scope of an international round robin test

563

Thermogravimetry/mass spectrometry study of weakly basic starch-based ion exchanger

564

Thermogravimetry/mass spectrometry study of woody residues and an herbaceous biomass crop using PCA techniques

565

Thermogravimetry: a means of estimating the relative fertility of the mineral soils of Barbados

566

Thermogravimetry-linked scan mass spectrometry —Detection of urushiol from an East Asian lacquer film—

567

Thermogravimetry–mass spectrometry on the pyrolysis process of Lyocell fibers with and without catalyst

568

Thermo-gravitational and vibrational convection in a near-critical gas in microgravity

569

Thermo-Gravitational Convection in a Near-Critical Fluid in a Side-Heated Enclosed Cavity

570

THERMOGRAVITATIONAL SEPARATION IN A VERTICAL ANNULAR POROUS LAYER

571

Thermohaline circulation in a two-layer model with sloping boundaries and a mid-ocean ridge

572

Thermohaline circulation in the Central Indian Basin (CIB) during austral summer and winter periods of 1997

573

Thermohaline circulation sensitivity to intermediate-level anomalies

574

Thermohaline Convection of Veronis and Stern Types Revisited

575

Thermohaline loops, Stommel box models, and the Sandström theorem

576

Thermohaline mixing in stars and the long-standing 3He problem

577

Thermohaline processes in a tropical coastal zone

578

Thermohaline staircase formations in the Tyrrhenian Sea

579

Thermohaline staircases in a Caribbean eddy and mechanisms for staircase formation

580

Thermohaline stratification and instabilities at tidal mixing fronts: results of an eddy resolving model for the German Bight

581

Thermohaline structure of an inverse estuary – The Gulf of Kachchh: Measurements and model simulations

582

Thermohaline structure of the Antarctic Surface Water/Winter Water in the Indian sector of the Southern Ocean

583

Thermohaline variability and Antarctic bottom water formation at the Ross Sea shelf break

584

Thermohaline variability and geostrophic circulation in the southern portion of the Gulf of California

585

Thermohaline variability of Mediterranean Water in the Gulf of Cadiz, 1948–1999

586

Thermohaline-mixing—binary evolution

587

Thermohydraulic analysis of high-Prandtl-number fluid in complex duct simulating first wall in fusion reactor

588

Thermo-Hydraulic Analysis of Slightly Inclined Finned Channel under Natural Convection

589

Thermo-hydraulic analysis of the first mirror and its cooling system for the ITER core CXRS diagnostic

590

Thermo-hydraulic analysis of the generic equatorial port plug design

591

Thermo-hydraulic analysis of the gradual cool-down to 80 K of the ITER toroidal field coil Original Research Article

592

Thermo-hydraulic analysis on in-bed calorimetry in a thin double-layered annulus metal hydride bed

593

Thermo-hydraulic analysis on Korean helium cooled solid breeder TBM with updated back manifolds design

594

Thermohydraulic and safety analysis on China advanced research reactor under station blackout accident

595

Thermo-hydraulic and structural analysis for finger-based concept of ITER blanket first wall

596

Thermohydraulic and thermoeconomic performance of a marine heat exchanger on a naval surface ship

597

Thermo-hydraulic and thermo-mechanical analysis of Korean helium cooled solid breeder TBM

598

Thermo-hydraulic behaviour of the vadose zone in sulphide tailings at Iberian Pyrite Belt: Waste characterization, monitoring and modelling

599

Thermo-hydraulic characterization of an automotive intercooler for a low pressure EGR application

600

Thermo-hydraulic design of earth-air heat exchangers

601

Thermohydraulic design of the KSTAR vacuum vessel

602

Thermo-hydraulic design verification of the neutral beam liner for the ITER vacuum vessel

603

Thermohydraulic effects of safety relief valves

604

Thermohydraulic effects of safety relief valves Original Research Article

605

Thermo-hydraulic engineering using first principles (a data-oriented approach to thermal equipment design)

606

Thermohydraulic experimental design for the European Helium-Cooled-Pebble-Bed Test Blanket Module

607

Thermohydraulic experiments on a water jet into vacuum during ingress of coolant event in a fusion experimental reactor

608

Thermo-hydraulic gradients on bentonite: distribution of soluble salts, microstructure and modification of the hydraulic and mechanical behaviour

609

Thermo-hydraulic instability of boiling natural circulation loop induced by flashing (analytical consideration)

610

Thermo-hydraulic instability of boiling natural circulation loop induced by flashing (analytical consideration) Original Research Article

611

Thermo-hydraulic investigation of nanofluid as a coolant in VVER-440 fuel rod bundle

612

THERMO-HYDRAULIC PERFORMANCE ANALYSIS OF PARABOLIC CONCENTRATING SOLAR WATER HEATER

613

Thermo-hydraulic performance of a heat exchanger tube with discrete corrugations

614

Thermohydraulic performance of a periodic trapezoidal channel with a triangular cross-section

615

Thermo-hydraulic performance of a solar air heater with n-subcollectors in series and parallel configuration

616

Thermohydraulic performance of air heating solar collectors with variable width, flat absorber plates

617

Thermohydraulic performance of packed-bed solar air heaters

618

Thermo-hydraulic performance of solar air heaters having integral chamfered rib roughness on absorber plates

619

Thermo-Hydraulic Performance of Tube Type Heat Exchanger with Semi-Circular Cut Twisted Tape Insert: A Numerical Exploration

620

Thermo-hydraulic predictions for multi-pass evaporators by orthogonal collocation using a new flow pattern map

621

Thermo-hydraulic study of a single row heat exchanger consisting of metal foam covered round tubes

622

Thermo-hydraulic testing and integrity of ITER Test Blanket Module (TBM) First Wall mock-up in JAEA

623

Thermo-hydraulical and thermo-mechanical analysis of the HCLL-TBM breeding unit

624

Thermo-hydraulicanalysisofthewindowlesstargetsystemOriginalResearchArticle

625

Thermohydraulics of square-section microchannels following a serpentine path

626

Thermo-hydraulics of the Peruvian accretionarycomplex at 12°S

627

Thermohydraulics of turbulent flow through a round tube by a peripherally-cut twisted tape with an alternate axis

628

Thermo-hydric analysis of concrete–rock bilayers under fire conditions

629

Thermo-hydric transfer within timber connections under fire exposure: Experimental and numerical investigations

630

Thermo-hydro-chemical modelling of a porous medium submitted to high temperature: An application to an axisymmetrical structure

631

Thermohydrodynamic analysis of a worn plain journal bearing

632

Thermohydrodynamic analysis of bump-type gas foil bearings using bump thermal contact and inlet flow mixing models

633

Thermohydrodynamic analysis of elliptical journal bearing with different grade oils

634

Thermo-hydrodynamic analysis of herringbone grooved journal bearings

635

Thermohydrodynamic analysis of journal bearings lubricated with couple stress fluids

636

Thermo-hydrodynamic aspect analysis of flows in solar chimney power plants—A case study

637

THERMOHYDRODYNAMIC CHARACTERISTICS OF JOURNAL BEARINGS RUNNING UNDER TURBULENT CONDITION

638

Thermohydrodynamic characteristics of two-phase flow in a heated capillary

639

Thermo-hydrodynamic design and safety parameter studies of the TRIGA MARK II research reactor

640

Thermohydrodynamic instabilities of conducting liquid jets in the presence of time-dependent transverse electric fields

641

Thermohydrodynamic lubrication analysis of high-speed journal bearing considering variable density and variable specific heat

642

Thermo-hydrodynamic performance of grooved oil journal bearing

643

Thermo-hydrodynamics analysis of vapor–liquid two-phase flow in the flat-plate pulsating heat pipe

644

Thermohydrodynamics of Circumstellar Disks with High-Mass Planets

645

Thermo-hydrolytic resistance of polyepoxide–glass fibres interfaces by the microbond test

646

Thermo-hydro-mechanical behaviour of two heavily overconsolidated clays

647

Thermo-hydro-mechanical coupling in clay barriers

648

Thermo-hydro-mechanical model of the Canister Retrieval Test

649

Thermohydromechanical Modeling of a Full-Scale Tunnel Sealing Clay Bulkhead

650

Thermo-hydro-mechanical Modeling of CO2 Sequestration System Around Fault Environment

651

Thermo-hydro-mechanical modeling of impermeable discontinuity in saturated porous media with X-FEM technique

652

Thermo-hydro-mechanical modelling of soil settlements induced by soil-vegetation-atmosphere interactions

653

Thermohydromechanical modelling of the buffer/container experiment

654

Thermohydromechanical simulations of the natural cooling stage of the Tunnel Sealing Experiment

655

Thermo-hydro-mechanical-air coupling finite element method and its application to multi-phase problems

656

Thermohydrostatic analysis of slot-entry hybrid journal bearing

657

Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures

658

Thermoinactivation of cellobiohydrolase I from Trichoderma reesei QM 9414

659

Thermo-induced changes in EPR spectra of metal-free oligo- and polyphthalocyanines

660

Thermo-induced lipid oxidation of a culinary oil: The effect of materials used in common food processing on the evolution of oxidised species

661

Thermoinduction of Chlorophyll Fluorescence and the Age-Related Condition of Higher Plant Leaves

662

Thermokarst dynamics in Western Siberia: insights from dendrochronological research

663

Thermokarst lake, hydrological flow and water balance indicators of permafrost change in Western Siberia

664

Thermokarst lakes and ponds on Mars in the very recent (late Amazonian) past

665

Thermokarst landforms and processes in Ares Vallis, Mars

666

Thermokarst processes and the origin of crater-rim gullies in Utopia and western Elysium Planitia

667

Thermokarst sediments and sedimentary structures, Tuktoyaktuk Coastlands, western Arctic Canada

668

Thermo-kinematic evolution of the Taiwan oblique-collision mountain belt as revealed by zircon fission track dating

669

Thermo-kinematic evolution of the Taiwan oblique-collision mountain belt as revealed by zircon fission track dating

670

Thermokinetic analysis of the MgO surface carbonation process in the presence of water vapor

671

Thermokinetic analysis of the multistep crystallization of a NANOPERM-type ribbon

672

Thermokinetic analysis of two-step curing reactions in melt: Part I. Investigation of low molecular model systems

673

Thermokinetic analysis of two-step curing reactions in melt: Part II. Investigation of polymeric model systems

674

Thermokinetic behavior of powdered phenol-formaldehyde (PPF) resins

675

Thermokinetic characterization of imipenem hydrolysis with metallo-β-lactamase CcrA from Bacteroides fragilis

676

Thermokinetic evaluation of pyrrolidinedicarboxylic acid inhibiting cefalexin hydrolysis with metallo-β-lactamase L1 from Stenotrophomonas maltophilia

677

Thermokinetic interactions leading to knock during homogeneous charge compression ignition

678

Thermokinetic investigation of cellulose pyrolysis — impact of initial and final mass on kinetic results

679

Thermokinetic investigation of effect of temperature on optimum NaCl concentration for petroleum bacterial growth

680

Thermokinetic investigation of effects of carbon source on petroleum bacterial growth

681

Thermokinetic investigation of the alcoholysis of acetyl chloride — Part I

682

Thermokinetic investigation of the alcoholysis of acyl chlorides

683

Thermokinetic investigation of the reaction of acetyl chloride with different alcohol types — Part II

684

Thermo-kinetic model for Prion diseases

685

Thermokinetic model of sample response in nonisothermal analysis

686

Thermokinetic modeling and parameter estimation for hydrogen permeation through Pd0.77Ag0.23 membranes

687

Thermokinetic modeling of the combustion of carbonaceous particulate matter

688

Thermokinetic Studies of Organotin(IV) Carboxylates Derived from para-Methoxyphenylethanoic Acid

689

Thermokinetic studies on the activation of bovine liver arginase by manganese ions

690

Thermokinetic study of the oxidation of ZrAl3 powders

691

Thermo-kinetic time-parameter method for reversible reactions

692

Thermo-kinetics of lipase-catalyzed synthesis of 6-O-glucosyldecanoate

693

Thermo-kinetics study of MIM thermal de-binding using TGA coupled with FTIR and mass spectrometry

694

Thermolabile 8-hydroxyguanine DNA glycosylase with low activity in senescence-accelerated mice due to a single-base mutation

695

Thermolabile variant of 5, 10-methylenetetrahydrofolate reductaseassociated with low red-cell folates: implications for folate intake recommendations

696

Thermolithographic Patterning of Sol-Gel Metal Oxides on Micro Hot Plate Sensing Arrays Using Organosilanes

697

Thermoluminescece properties of BeO:Mg nanoparticles produced by sol-gel method

698

Thermoluminescece properties of BeO:Mg nanoparticles produced by sol-gel method

699

Thermoluminescence (TL) dating of burnt flints: problems, perspectives and some examples of application

700

Thermoluminescence ages of loess and associated sediments in central Nebraska, USA

701

Thermoluminescence Analysis for Detection of Irradiated Food-Effects of Dose Rate on the Glow Curves of Quartz

702

Thermoluminescence Analysis for Detection of Irradiated Food-Luminescence Characteristics of Minerals for Different Types of Radiation and Radiation Doses

703

Thermoluminescence and absorption spectra of CdSe quantum dot-doped glass irradiated by X-rays

704

Thermoluminescence and dosimetric aspects of topaz from Yono Shigar mine in Pakistan

705

Thermoluminescence and electroluminescence of annealed polyfluorene layers

706

Thermoluminescence and electron spin resonance properties of some travertines from Turkey

707

Thermoluminescence and induced absorption in X-ray-irradiated CdS-doped glasses

708

Thermoluminescence and new 14C age estimates for late quaternary loesses in southwestern Nebraska

709

Thermoluminescence and optical studies on X-irradiated terbium-doped potassium bromide crystals

710

Thermoluminescence and photoluminescence of LiNaSO4:Eu irradiated with 24 and 48 MeV 7Li ion beam

711

Thermoluminescence and scintillation properties of LuAP and YAP

712

Thermoluminescence and sintering of high-purity α-alumina doped by Zr, Th and Ca

713

Thermoluminescence and synchrotron radiation studies on the persistent luminescence of BaAl2O4:Eu2+,Dy3+

714

Thermoluminescence as a new research tool for the evaluation of geothermal activity of the Kakkonda geothermal system, northeast Japan

715

Thermoluminescence as a tool for monitoring ozone-stressed plants

716

Thermoluminescence characterisation of chemical vapour deposited diamond films

717

Thermoluminescence characterisation of chemical vapour deposited diamond films

718

Thermoluminescence characteristics of CaS doped with rare earth ions Ce and Sm

719

Thermoluminescence characteristics of copper activated calcium borate nanocrystals (CaB4O7:Cu)

720

Thermoluminescence characteristics of gamma irradiated Li2B4O7:Cu nanophosphor

721

Thermoluminescence characteristics of gamma irradiated Li2B4O7:Cu nanophosphor

722

Thermoluminescence characteristics of inorganically and organically capped ZnS:Cu nanophosphors

723

THERMOLUMINESCENCE CHARACTERISTICS OF LOCAL NATURAL CALCIUM FLUORIDE AFTER GAMMA RADIATION EXPOSURE

724

Thermoluminescence characteristics of MgB4O7 : Dy,Na

725

Thermoluminescence characteristics of MgB4O7 : Dy,Na

726

Thermoluminescence characteristics of NaSr4(BO3)3:Ce3+ under β-ray irradiation

727

Thermoluminescence characteristics of rare-earth-doped LiCaBO3 phosphor

728

Thermoluminescence Characteristics of SrB6O10:Tb

729

Thermoluminescence characteristics of the Li2CO3–K2CO3–H3BO3 glass system co-doped with CuO and MgO

730

Thermoluminescence characteristics of the main glow peak in α-Al2O3:C exposed to low environmental-like radiation doses

731

Thermoluminescence chronology of sand profiles in the Mu Us Desert, China

732

Thermoluminescence dates and palaeoenvironmental information of the late Quaternary sand deposits, Tierra de Pinares, Central Spain

733

Thermoluminescence Dating of a Middle Palaeolithic Occupation at Sodmein Cave, Red Sea Mountains (Egypt)

734

Thermoluminescence dating of a mikveh in Ichenhausen, Germany

735

Thermoluminescence dating of Denizli travertines from the southwestern part of Turkey

736

Thermoluminescence dating of heated flint from the Mousterian site of Bérigoule, Murs, Vaucluse, France

737

Thermoluminescence dating tests of Pleistocene sediments from uplifted marine shorelines along the southwest coastline of the Calabrian Peninsula (southern Italy)

738

Thermoluminescence dosimetric characteristics of thulium doped ZnB2O4 phosphor

739

Thermoluminescence dosimetry materials: Properties and uses : image and image, 204 pp. Nuclear Technology Publishing, Ashford, Kent, U.K. ISBN 1-870965-19-1. Hardback price: £50 (U.K.); $95.00 (U.S.) outside U.K.

740

Thermoluminescence excitation spectroscopy: A versatile technique to study persistent luminescence phosphors

741

Thermoluminescence for rare-earths doped tellurite glasses

742

Thermoluminescence general-order glow curve deconvolution function with continuous distribution of activation energies

743

Thermoluminescence general-order glow curve deconvolution function with continuous distribution of activation energies

744

Thermoluminescence glow curves analysis of pure and CeO2-doped Li2O–Al2O3–SiO2 glass ceramics

745

Thermoluminescence glow-curve deconvolution functions for mixed order of kinetics and continuous trap distribution

746

Thermoluminescence glow-curve deconvolution functions for mixed order of kinetics and continuous trap distribution

747

Thermoluminescence in gamma irradiated iPP-VGVGCNF

748

Thermoluminescence in heavily F-doped of SnO2 nanocrystals

749

Thermoluminescence in semiconductor-doped glasses

750

Thermoluminescence in silicon substituted apatite and silicon stabilized tricalcium phosphate bioceramic

751

Thermoluminescence investigation of sol–gel derived and γ-irradiated SnO2:Eu3+ nanoparticles

752

Thermoluminescence kinetic analysis of quartz using an improved general order model for exponential distribution of activation energies

753

Thermoluminescence kinetic analysis of quartz using an improved general order model for exponential distribution of activation energies

754

Thermoluminescence kinetic parameters of basaltic rock samples due to continuous trap distribution

755

Thermoluminescence kinetic parameters of basaltic rock samples due to continuous trap distribution

756

Thermoluminescence kinetic study of binary lead-silicate glasses

757

Thermoluminescence kinetics of lithium borate crystals

758

Thermoluminescence measurements of liquid crystal azomethines and poly(azomethines) with different shapes as thermo-detectors

759

Thermoluminescence measurements of neutron streaming through JET Torus Hall ducts

760

Thermoluminescence mechanism of dysprosium-doped β-tricalcium phosphate phosphor

761

Thermoluminescence Method for Detection of Irradiated Black Pepper

762

Thermoluminescence of B2O3–Li2O glass system doped with MgO

763

Thermoluminescence of combustion synthesized yttrium oxide

764

Thermoluminescence of LaBr3:Ce and LaCl3:Ce crystals

765

Thermoluminescence of LaBr3:Ce and LaCl3:Ce crystals

766

Thermoluminescence of nanocrystalline LiF:Mg, Cu, P

767

Thermoluminescence of natural and synthetic diopside

768

Thermoluminescence of N-carbazolyl-substituted polysilanes

769

Thermoluminescence of pure LiF crystals and color centers

770

Thermoluminescence of Tb doped Gd2O2S phosphor

771

Thermoluminescence of the blue light-emitting system based on poly(9-vinylcarbazole) doped with a pyrazoloquinoline dye

772

Thermoluminescence of the meteorite interior: A possible tool for the estimation of cosmic ray exposure ages

773

Thermoluminescence of ultra-high dilutions of lithium chloride and sodium chloride

774

Thermoluminescence of Y2O3:Tb3+ thin films deposited by electron beam evaporation

775

Thermoluminescence parameters and kinetics of irradiated inorganic dust collected from black peppers

776

Thermoluminescence Performance of Carbon-doped Aluminium Oxide for Dose Measurement by Various Preparation Methods

777

Thermoluminescence properties of 100 MeV Si7+ swift heavy ions and UV irradiated CdSiO3:Ce3+ nanophosphor

778

Thermoluminescence properties of Chile Guajillo (paprika) Mexicano

779

Thermoluminescence properties of double potassium yttrium fluorides singly doped with Ce3+, Tb3+, Dy3+ and Tm3+ in response to image and image irradiation

780

Thermoluminescence properties of graphene–nano ZnS composite

781

Thermoluminescence properties of rare earth doped lithium magnesium borate phosphors

782

Thermoluminescence recorded in a hyperbolic heating profile

783

Thermoluminescence response in gamma and UV irradiated Dy2O3 nanophosphor

784

Thermoluminescence spectroscopy of Eu2+ and Mn2+ doped BaMgAl10O17

785

Thermoluminescence studies and detailed kinetic analysis of Sr4Al14O25:Eu2+, Dy3+ phosphor

786

Thermoluminescence studies of LiBa2B5O10:RE3+ (RE=Dy, Tb and Tm) Original Research Article

787

Thermoluminescence studies of solution combustion synthesized Y2O3:Nd3+ nanophosphor

788

Thermoluminescence studies on Cu-doped Li2B4O7 single crystals

789

Thermoluminescence studies on γ-irradiated CaF2:Dy:Pb:Na single crystals

790

Thermoluminescence study of irradiated lithium orthosilicate

791

Thermoluminescence study of MnO doped borophosphate glass samples for radiation dosimetry

792

Thermoluminescence study of rare earth ion (Dy3+) doped LiF:Mg crystals grown by EFG technique

793

Thermoluminescence study of X-ray irradiated muscovite mineral under various heating rate

794

Thermoluminescence, Electron Spin Resonance and14C-dating of the Late Middle and Early Upper Palaeolithic Site of Geißenklösterle Cave in Southern Germany

795

Thermoluminescence, optical absorption, photoluminescence, FT-IR and XRD studies on l-arginine doped orthophosphoric acid

796

Thermoluminescence, photoluminescence and EPR studies on Mn2+ activated yttrium aluminate (YAlO3) perovskite

797

Thermoluminescence, structural and magnetic properties of a Li2O–B2O3–Al2O3 glass system doped with LiF and TiO2

798

Thermoluminescent (TL) properties of the perovskite KMgF3 activated by Ce and Er impurities

799

Thermoluminescent Characteristics of GR-200, TLD-700H and TLD-100 for Low Dose Measurement: Linearity, Repeatability, Dose Rate and Photon Energy Dependence

800

Thermoluminescent dosimetry of the SymmetraTM 125I model I25.S06 interstitial brachytherapy seed

801

Thermoluminescent properties of a Li2O–B2O3–Al2O3 glass system doped with CaF2 and Mn

802

Thermoluminescent properties of Eu2+ and RE3+ co-doped phosphors CaGa2S4:Eu2+, RE3+ (RE=Ln, excluding Pm, Eu and Lu)

803

Thermoluminescent properties of lithium borate, magnesium borate and calcium sulfate developed for temperature sensing

804

Thermoluminescent properties of Sr2P2O7 doped with copper and some rare earth elements

805

Thermoluminescent response of carbon nitride thin films deposited by laser ablation

806

Thermolyses of α-phosphorylmethyl tetrazolyl sulfoxides in the presence of 2,3-dimethyl-1,3-butadiene and their reactions with several amines

807

Thermolysis of [(η5-C5H5)Co(PPh3)(η2-DMAD)], revisited: a solid state analysis reveals the true structure of the triphenylphosphine–alkyne coupling product

808

Thermolysis of 2,4,6-trichlorophenol chemisorbed on aluminium oxides as example of fly ash mediated surface catalysis reaction in PCDD/PCDF formation

809

Thermolysis of 3-(Carbazol-3-yl)-2-azidopropenoates

810

Thermolysis of 4-(2-azido-3-nitrophenyl)-1,4-dihydropyridines as source of β-carboline derivatives and some related compounds

811

Thermolysis of acidic aluminum chloride solution and its products

812

Thermolysis of bis(pentacoordinate) silicon compound bearing two 1-fluorodisilanyl units at 4- and 8-positions on 1,5-bis(dimethylamino)naphthalene ring: construction of disilapyrene skeleton and cyclophane-shaped siloxane dimer

813

Thermolysis of fibreglass polyester composite and reutilisation of the glass fibre residue to obtain a glass–ceramic material

814

Thermolysis of fibreglass polyester composite and reutilisation of the glass fibre residue to obtain a glass–ceramic material

815

Thermolysis of fluorinated cycloalkylidene fulgides yields a new class of photochromic compounds

816

Thermolysis of lanthanide dithiocarbamate complexes

817

Thermolysis of methane in a solar reactor for mass-production of hydrogen and carbon nano-materials Original Research Article

818

Thermolysis of microalgae and duckweed in a CO2-swept fixed-bed reactor: Bio-oil yield and compositional effects

819

Thermolysis of N-arylnicotinamide oximes III

820

Thermolysis of N-arylnicotinamide oximes III

821

Thermolysis of new hybrid silsesquioxane–carbosilane materials

822

Thermolysis of octa (hydridodimethylsiloxyl) octasilsesquioxane in pyridine media and subsequent toluidine blue O adsorption

823

Thermolysis of organic compounds under H2 (D2)

824

Thermolysis of polanga seed cake to bio-oil using semi batch reactor

825

Thermolysis of silica-supported bis(neopentyl) complexes of titanium and zirconium

826

Thermolysis of the polyyne C8H2 in hexane and methanol: Experimental and theoretical study Original Research Article

827

Thermolysis of titanocene methyl compounds bearing t-butyl- and benzyltetramethylcyclopentadienyl ligands

828

Thermolysis of trifluoromethyl-containing vinyldiazocarbonyl compounds and X-ray crystal structure analysis of unexpected reaction products

829

Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective

830

Thermolysis of β-hydroxysulfides bearing several heteroaromatics

831

Thermolysis on aluminum oxides chemisorbed 3-chlorophenol as example for the fly ash mediated surface catalysis reaction

832

Thermolysis preparation of zinc(II) oxide nanoparticles from a new micro-rods one-dimensional zinc(II) coordination polymer synthesized by ultrasonic method

833

Thermolysis preparation of ZnS nanoparticles from a nano-structure bithiazole zinc(II) coordination compound

834

Thermolysis studies on magnesium zinc bis(citrato)ferrate pentahydrate precursor for synthesis of ferrite nanoparticles

835

Thermolysis studies on platinacycloalkane complexes

836

Thermolysis, specific heat capacity and adiabatic time-to-explosion of 2,3-dihydro-4-nitro-3-(dinitromethylene)-1H-pyrazol-5-amine potassium salt

837

Thermolysis, specific heat capacity and adiabatic time-to-explosion of 2,3-dihydro-4-nitro-3-(dinitromethylene)-1H-pyrazol-5-amine potassium salt

838

Thermolytic conversion of a bis(alkoxy)tris(siloxy)tantalum(V) single-source molecular precursor to catalytic tantala–silica materials

839

Thermolytic decomposition of benzylic dialkoxy disulfides

840

Thermolytic formation and microstructure of IrO2 + Ta2O5 mixed oxide anodes from chloride precursors

841

Thermolytic Molecular Precursor Route to Active and Selective Vanadia–Zirconia Catalysts for the Oxidative Dehydrogenation of Propane

842

Thermolytic molecular precursor route to site-isolated vanadia–silica materials and their catalytic performance in methane selective oxidation

843

Thermolytic molecular precursor routes to Cr/Si/Al/O and Cr/Si/Zr/O catalysts for the oxidative dehydrogenation and dehydrogenation of propane

844

Thermolytical treatment of dried sewage sludge and other biogenic materials—including upgrading of pyrolysis vapours by a cracking catalyst and examination of heavy metals by X-ray fluorescence

845

Thermomagnetic effect in a twisted carbon nanotube

846

Thermomagnetic instability effects vs. vortex matter phase transitions in type-II superconductors

847

Thermo-magnetic processing of ductile cast iron

848

Thermo-magnetic properties of ternary polydispersed Mn0.5Zn0.5Fe2O4 ferrite magnetic fluid

849

Thermo-magnetic refrigeration as applied to hydrogen liquefaction I. Fundamentals and type-II superconductors

850

Thermomagnetic stability and heat-resistance properties of carbonyl iron filled siloxanes

851

Thermomagnetic study of metastable nanograins in soft magnetic nanocrystalline alloys

852

Thermomagnetic study of the amorphous cobalt-erbium borides Co80ErxB20−x (0 ⩽ x ⩽ 4)

853

Thermo-Magneto-Convective Transport around a Square Cylinder in a Square Duct under Strong Axial Magnetic Field

854

Thermomagnetoelastic and thermoelectroelastic properties of a ferromagnetic composite within an elastomer matrix

855

Thermomagnetoelastic and thermoelectroelastic properties of a ferromagnetic composite within an elastomer matrix

856

Thermo-magneto-mechanical analysis of head–disk interface in heat assisted magnetic recording

857

Thermomagnetometric evidence of γ-Fe2O3 as an intermediate in the oxidation of magnetite

858

Thermo-mathematical modeling of parabolic trough collector

859

Thermo-mechanic model for concrete exposed to elevated temperatures

860

Thermomechanical Response in Thermoelastic Medium with Double Porosity

861

Thermo-mechanical analyses and assessment with respect to the design codes and standards of the HCPB-TBM Breeder Unit

862

Thermo-mechanical analyses of HELICA and HEXCALIBER mock-ups

863

Thermo-mechanical analyses of large ceramic rings during brazing process

864

Thermomechanical analyses of laser precision joining for optoelectronic components

865

Thermomechanical analyses of phenolic foam reinforced with glass fiber mat

866

Thermo-mechanical analysis for exhaust manifold using elasto-viscoplastic chaboche model

867

Thermomechanical analysis for Laser + GMAW-P hybrid welding process

868

Thermo-Mechanical Analysis of a Coated Cylinder Head

869

Thermo-mechanical analysis of a compliant poly(carbonate-urea)urethane after exposure to hydrolytic, oxidative, peroxidative and biological solutions

870

Thermo-mechanical analysis of a DEMO divertor cooling finger under the EFREMOV test conditions

871

Thermo-mechanical analysis of a micro-engineered tungsten-foam armored IFE FW

872

Thermomechanical analysis of air-dried whole soil samples

873

Thermo-Mechanical Analysis of Aluminium Silicon Carbide Composite Materials

874

Thermo-mechanical analysis of an acceleration grid for the international thermonuclear experimental reactor–neutral beam injection system

875

Thermo-mechanical analysis of dental silicone polymers

876

Thermo-mechanical analysis of diesel engines cylinder heads using a two-layer viscoelasticity model with considering viscosity effects

877

Thermomechanical analysis of elastic–plastic fibrous composites comprising an inhomogeneous interphase

878

Thermomechanical analysis of elastoplastic medium in sliding contact with fractal surface

879

Thermo-mechanical analysis of fatigue cracks of diesel engines cylinder heads using a two-layer two-layer viscoplasticity model with considering viscosity effects

880

Thermomechanical Analysis of FGM-Coated Centrifugal Blades of Gas Turbine Using Finite Element Method

881

THERMOMECHANICAL ANALYSIS OF FUNCTIONALLY GRADED CYLINDERS AND PLATES

882

Thermomechanical analysis of functionally graded material (FGM) plates using element-free Galerkin method

883

Thermo-mechanical analysis of functionally gradedv thick spheres with linearly time-dependent temperature

884

Thermo-mechanical analysis of industrial solidification processes

885

Thermomechanical analysis of laboratory ash, combustion ash and deposits from coal combustion

886

Thermo-mechanical analysis of LWR SiC/SiC composite cladding

887

Thermo-mechanical analysis of magnesium alloy cylinder heads using a two-layer viscoplasticity model

888

Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy

889

Thermo-mechanical analysis of pebble beds in HELICA mock-up experiments

890

Thermo-mechanical analysis of periodic multiphase materials by a multiscale asymptotic homogenization approach

891

Thermo-mechanical analysis of plasma facing components of diagnostics in the Wendelstein 7-X stellarator

892

Thermomechanical analysis of quartz porcelain in temperature cycles

893

Thermo-mechanical analysis of retro-reflectors for interferometry and polarimetry in W7-X

894

Thermo-mechanical analysis of ribbed strip rolling by a three-dimensional rigid–visco-plastic FEM

895

Thermo-mechanical analysis of RMP coil system for EAST tokamak

896

Thermo-mechanical analysis of supercritical pressure light water-cooled fast reactor fuel rod by FEMAXI-6 code

897

Thermo-mechanical analysis of the fire performance of dowelled timber connection

898

Thermo-mechanical analysis of the ICRH antenna for the ignitor experiment: Part I: Faraday shield

899

Thermo-mechanical analysis of the ICRH antenna for the ignitor experiment: Part II: Antenna straps

900

Thermo-mechanical analysis of the magnetic head–disk interface with a fractal surface description

901

Thermo-mechanical analysis of the thermal shield for ITER magnet feeder

902

Thermo-mechanical analysis of the Wendelstein 7-X divertor

903

Thermomechanical analysis of thermal shock fracture in the brittle/ductile transition zone. Part I: description of tests

904

Thermomechanical analysis of thermal shock fracture in the brittle/ductile transition zone—Part II: Numerical calculations and interpretation of the test results

905

Thermomechanical Analysis of Various Solid-oxide-fuel-cell Components Using Simple Analog Micrometer Measurements

906

Thermo-mechanical analysis of Wendelstein 7-X plasma facing components

907

Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts

908

Thermo-Mechanical Analysis of Wire Drawing of Copper with PCD die: FEM Study

909

Thermomechanical analysis with finite and boundary element methods — A bibliography (1992–1994)

910

Thermomechanical Analytical 3D Thermal/Stress Estimation Sidewall Grinding Model

911

Thermomechanical Analytical 3D Thermal/Stress Estimation Sidewall Grinding Model

912

Thermomechanical and adhesive properties of radiation-modified polymer composites for thermosetting products

913

Thermo-mechanical and crack position on stress intensity factor in particle-reinforced Zinc–aluminium alloy composites

914

Thermo-mechanical and diffusion modelling in the process of ceramic–metal friction welding

915

Thermo-mechanical and hydrophilic properties of polysaccharide/gluten-based bioplastics

916

Thermomechanical and isothermal fatigue behavior of 347 and 316L austenitic stainless tube and pipe steels

917

Thermomechanical and kinetic approaches to diffusional-displacive phase transitions in inelastic materials

918

Thermo-mechanical and Light Transmittance of Silica Diffusant Filled Epoxy Composites

919

Thermo-mechanical and metallurgical aspects in friction stir processing of AZ31 Mg alloy—A numerical and experimental investigation

920

Thermo-mechanical and microstructural characterisation of sodium-poly(sialate-siloxo) (Na-PSS) geopolymers

921

Thermo-mechanical and optical properties of calcium aluminosilicate glasses doped with Er3+ and Yb3+

922

Thermo-mechanical and oxidation behaviour of high temperature advanced metallic alloys

923

Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers

924

Thermomechanical and thermogravimetric analysis of blends of poly (vinyl chloride) (PVC) with maleic anhydride–allyl propionate copolymer

925

Thermomechanical and viscoelastic behavior of a no-flow underfill material for flip-chip applications

926

Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications

927

Thermo-mechanical aspects of the heterogeneous ignition of metals

928

Thermomechanical behavior and constitutive modeling of tungsten-based composite over wide temperature and strain rate ranges

929

Thermomechanical behavior of a graphite foam Original Research Article

930

Thermo-mechanical behavior of a thin concrete shell during its early age

931

Thermomechanical behavior of a zircon–mullite composite

932

Thermo-mechanical behavior of cylindrical pressure vessels made of functionally graded austenitic/ferritic steels

933

Thermo-mechanical behavior of cylindrical pressure vessels made of functionally graded austenitic/ferritic steels

934

Thermomechanical behavior of different texture components in Cu thin films Original Research Article

935

Thermo-mechanical behavior of electrospun thermoplastic polyurethane nanofibers

936

Thermomechanical Behavior of Epoxy- Aluminum Composites Used for Soft Tooling

937

Thermomechanical Behavior of Epoxy- Aluminum Composites Used for Soft Tooling

938

Thermomechanical behavior of Fe–Mn–Si–Cr–Ni shape memory alloys modified with samarium

939

Thermo-mechanical behavior of low-dimensional systems: The local bond average approach

940

Thermomechanical behavior of metallocene ethylene-α-olefin copolymers

941

Thermo-mechanical behavior of retro-reflector and resulting parallelism error of laser beams for Wendelstein 7-X interferometer

942

Thermo-mechanical behavior of shape memory alloy made stent- graft by multi-plane model

943

Thermomechanical behavior of shape memory elastomeric composites

944

Thermo-mechanical behavior of the disc brake for varying the number of vanes

945

Thermomechanical behavior of thermoset shape memory polymer programmed by cold-compression: Testing and constitutive modeling

946

Thermomechanical Behavior of Thermoviscoelastic Solid during Dynamic Crack Propagation

947

Thermomechanical behavior of Ti–25Pd–24Ni–1W shape memory alloy reinforced Ti matrix smart composites

948

Thermomechanical behavior of Ti–25Pd–24Ni–1W shape memory alloy reinforced Ti matrix smart composites

949

Thermomechanical behavior of Ti-rich NiTi shape memory alloys

950

Thermo-mechanical behavior of uniaxially drawn and crystallized poly(ethylene naphthalene-2,6-dicarboxylate) (PEN) films

951

Thermomechanical behavior of virgin and highly crosslinked ultra-high molecular weight polyethylene used in total joint replacements

952

Thermo-mechanical behaviors of butadiene rubber reinforced with nano-sized calcium carbonate

953

Thermo-mechanical behaviors of epoxy resins reinforced with nano-Al2O3 particles

954

Thermo-mechanical behaviors of the expanded graphite-phase change material matrix used for thermal management of Li-ion battery packs

955

Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata)

956

Thermomechanical behaviour analysis and simulation of steel/refractory composite linings

957

Thermo-mechanical behaviour of a single slice test device for the FRIB high power target

958

Thermo-mechanical behaviour of a single slice test device for the FRIB high power target

959

Thermomechanical behaviour of actively cooled divertor elements with internal coolant flow return

960

Thermo-mechanical behaviour of alkali free bioactive glass-ceramics co-doped with strontium and zinc

961

Thermomechanical behaviour of ceramic breeder and beryllium pebble beds

962

Thermomechanical behaviour of ceramic breeder pebble stacks for HICU

963

Thermomechanical behaviour of functionally graded plates with HSDT

964

Thermo-mechanical behaviour of low cement castables derived from mullite aggregates synthesised from beach sand sillimanite

965

Thermo-mechanical behaviour of rubber materials during vulcanization

966

Thermo-mechanical behaviour of shape memory alloy reinforced composite laminate (Ni-Ti/glass-fibre/epoxy)

967

Thermo-mechanical behaviour of shape memory alloy reinforced composite laminate (Ni-Ti/glass-fibre/epoxy)

968

Thermo-mechanical behaviour of the structures of tropical clays from Togo (West Africa) fired at 500 °C, 850 °C and 1060 °C

969

Thermo-mechanical behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles at different temperatures

970

Thermomechanical bending and free vibration of single-layered graphene sheets embedded in an elastic medium

971

Thermo-mechanical buckling analysis of functionally graded plates with an elliptic cutout

972

Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Singlewalled Carbon Nanotubes

973

Thermomechanical buckling and postbuckling responses of composite panels with skewed stiffeners

974

Thermomechanical buckling of delaminated composite laminates

975

Thermomechanical buckling of laminated composite and sandwich plates using global–local higher order theory

976

Thermomechanical buckling of laminated composite and sandwich plates using global–local higher order theory

977

Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature-dependent Material

978

Thermo-mechanical calculations on operation temperature limits of tungsten as plasma facing material

979

Thermo-mechanical characterisation of AA 6056-T4 and estimation of its material properties using Genetic Algorithm

980

Thermo-mechanical characteristics and stability boundaries of antenna structures in supersonic flows

981

Thermomechanical characteristics of calcium aluminate cement and sand tapes prepared by tape casting

982

Thermo-mechanical characteristics of concrete at elevated temperatures up to 310 °C Original Research Article

983

Thermomechanical characteristics of the low activation materials chromium and Cr·5Fe·1Y2O3 alloy

984

Thermo-mechanical characteristics of thermally aged polyethylene/polypropylene blends

985

Thermomechanical characterization of a shape memory polymer based self-repairing syntactic foam

986

Thermomechanical characterization of Cu47.5Zr47.5Al5 bulk metallic glass within the homogeneous flow regime

987

Thermo-mechanical characterization of Cu–Al–Ni shape memory alloys elaborated by powder metallurgy

988

Thermo-mechanical characterization of epoxy/clay nanocomposites as matrices for carbon/nanoclay/epoxy laminates

989

Thermo-mechanical characterization of forged coated products during water quench

990

Thermo-mechanical characterization of fumed silica-epoxy nanocomposites

991

Thermo-mechanical characterization of insulated and epoxy-impregnated Nb/sub 3/Sn composites

992

Thermo-mechanical Characterization of Insulating Bio-plasters Containing Recycled Volcanic Pyroclasts

993

Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications

994

Thermomechanical characterization of P/M Ti–Fe–Mo–Y alloy with a fine lamellar microstructure

995

Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor?

996

Thermo-mechanical characterization of postconsumer recycled high impact polystyrene from disposable cups: Influence of the number of processing cycles

997

Thermomechanical characterization of pure polycrystalline tantalum

998

Thermomechanical characterization of β-stabilized Ti–45Al–7Nb–0.4W–0.15B alloy

999

Thermomechanical Comparison Between Bobbin and Conventional Friction Stir Welding of A356 Aluminum Alloy

1000

Thermo-mechanical consequences of phase transformations in the heat-affected zone using a cyclic uniaxial test

بازگشت