ليست عنوان مقالات لاتين Finite element modeling of dislocation in solids and its applications to the analysis of GaN nanostructures Finite Sample Size Effect on Minimum Variance Beamformers: Optimum Diagonal Loading Factor for Large Arrays.

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Finite element modeling of dislocation in solids and its applications to the analysis of GaN nanostructures

2

Finite element modeling of dislocation reduction in GaAs and InP single crystals grown from the VGF process

3

Finite element modeling of double skin profiled composite shear wall system under in-plane loadings

4

Finite element modeling of elasto-plastic contact between rough surfaces

5

Finite element modeling of electric current-activated sintering: The effect of coupled electrical potential, temperature and stress Original Research Article

6

Finite element modeling of electrochemical-poroelastic behaviors of conducting polymers

7

Finite element modeling of electro-mechanically coupled analysis for ferroelectric ceramic materials with defects Original Research Article

8

Finite element modeling of electron beam welding of a large complex Al alloy structure by parallel computations

9

Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry

10

Finite Element Modeling of Extensional Structures in the Annapurna Region of Central Himalayas

11

Finite element modeling of fluid–rock interaction problems in pore-fluid saturated hydrothermal/sedimentary basins Original Research Article

12

Finite element modeling of frequency dependent and temperature-dependent dynamic behavior of viscoelastic materials in simple shear

13

FINITE ELEMENT MODELING OF FRICTION STIR WELDING IN ALUMINUM ALLOYS JOINT

14

Finite element modeling of GTA weld surfacing applied to hot-work tooling

15

Finite element modeling of guyed back spars in cable logging

16

Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels

17

Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Model development, verification and investigation of tube parameters

18

Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Optimization of partial filling and a design method for poles

19

Finite element modeling of human skin using an isotropic, nonlinear elastic constitutive model

20

Finite element modeling of hydraulic fracturing on a reservoir scale in 2D

21

Finite element modeling of hydrogen diffusion in fusion zone of HQ130 high strength steel

22

Finite element modeling of hydrostatic extrusion for mono-core superconductor billets

23

Finite element modeling of impact, damage evolution and penetration of thick-section composites

24

Finite element modeling of incremental bridge launching and study on behavior of the bridge during construction stages

25

Finite element modeling of indentation into superhard coatings

26

Finite element modeling of interacting fault systems

27

Finite element modeling of interfacial forces and contact stresses of pneumatic tire on fresh snow for combined longitudinal and lateral slips

28

FINITE ELEMENT MODELING OF LARGE DEFORMATION VISCOELASTIC FRICTIONAL CONTACT SYSTEMS

29

Finite element modeling of laser bending of pre-loaded sheet metals

30

Finite element modeling of linear elastodynamics problems with explicit time-integration methods and linear elements with the reduced dispersion error

31

Finite element modeling of lipid bilayer membranes

32

Finite element modeling of low-velocity impact on laminated composite plates and cylindrical shells

33

Finite element modeling of mechanically fastened composite-aluminum joints in aircraft structures

34

Finite element modeling of melting crack tip under thermo-electric Joule heating

35

Finite element modeling of microstructural changes in dry and cryogenic cutting of Ti6Al4V alloy

36

Finite element modeling of microstructurally small cracks using single crystal plasticity

37

Finite element modeling of multi-level cervical spinal segments (C3–C6) and biomechanical analysis of an elastomer-type prosthetic disc

38

Finite element modeling of multi-pass welding and shaped metal deposition processes

39

Finite element modeling of nanoindentation on C–S–H: Effect of pile-up and contact friction

40

Finite element modeling of nonlinear vibration behavior of piezo-integrated structures

41

Finite element modeling of non-orthogonal loosely woven fabrics in advanced occupant restraint systems

42

Finite element modeling of orthogonal micromachining of anisotropic pyrolytic carbon via damaged plasticity

43

Finite element modeling of passive material influence on the deformation and force output of skeletal muscle

44

Finite element modeling of passive material influence on the deformation and force output of skeletal muscle

45

Finite element modeling of plain weave fabrics from photomicrograph measurements

46

Finite element modeling of plastic anisotropy induced by texture and strain-path change

47

Finite element modeling of plasticity-induced crack closure due to occasional mode II loading on mode I fatigue crack growth

48

Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects

49

Finite element modeling of polymer curing in natural fiber reinforced composites

50

Finite element modeling of polymer matrix nano-composites reinforced by nano-cylindrical fillers

51

Finite element modeling of pore-fluid flow in the Dachang ore district, Guangxi, China: Implications for hydrothermal mineralization

52

Finite element modeling of porous titanium

53

Finite Element Modeling of Post-Tensioned TwoWay Concrete Slabs under Flexural Loading

54

Finite element modeling of power electronic circuits containing switches attached to saturable magnetic components

55

Finite element modeling of prestressed concrete spandrel beams

56

FINITE ELEMENT MODELING OF RANDOM WASTE COTTON FIBER REINFORCED POLYETHYLENE COMPOSITES

57

FINITE ELEMENT MODELING OF RC CONNECTIONS STRENGTHENED WITH FRP LAMINATES

58

Finite Element Modeling of Reinforced Concrete Beam-Column Connections

59

Finite element modeling of reinforced concrete beams exposed to fire

60

Finite element modeling of residual stress around holes in the thermal barrier coatings

61

Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius

62

Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius

63

Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius

64

Finite Element Modeling of Roller Burnishing Process

65

Finite element modeling of rolling process and optimization of process parameter

66

Finite element modeling of scattering problems involving infinite domains using drilling degrees of freedom Original Research Article

67

Finite element modeling of sheet-metal blanking operations with experimental verification

68

Finite element modeling of single-walled carbon nanotubes

69

Finite element modeling of smart plates/shells using higher order shear deformation theory

70

Finite element modeling of solid particle erosion in AISI 4140 steel and nickel–tungsten carbide composite material produced by the laser-based powder deposition process

71

Finite element modeling of spur gearing fractures

72

Finite element modeling of strain rate and grain size dependency in nanocrystalline materials

73

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

74

Finite element modeling of temporal evolution of the quasi-piezoelectric d33 coefficient of cellular piezoelectret Polypropylene film

75

Finite element modeling of textile composites

76

Finite Element Modeling of the Acoustic Wave Propagation From a Cavity Near a Free-Surface

77

Finite Element Modeling of the Acoustic Wave Propagation From a Cavity Near a Free-Surface

78

Finite element modeling of the contact interface between trans-tibial residual limb and prosthetic socket

79

Finite element modeling of the deformation behavior of semi-solid materials

80

Finite element modeling of the deformation of magnetoelastic film

81

Finite element modeling of the dynamic response of a composite reinforced concrete bridge for structural health monitoring

82

Finite element modeling of the effect of the ceramic coatings on heat transfer characteristics in thermal barrier applications

83

Finite element modeling of the elastic modulus of thermal barrier coatings

84

Finite element modeling of the filament winding process

85

Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel

86

Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel

87

Finite element modeling of the influence of anisotropic material properties on dislocations in metals

88

Finite element modeling of the influence of anisotropic material properties on dislocations in metals

89

Finite element modeling of the mechanical effects of the UV laser ablation of polymer coatings

90

Finite element modeling of the nonlinear oscillations in axisymmetric acoustic resonators

91

Finite element modeling of the porosity formation in castings

92

Finite element modeling of the quasi-static axial crushing of braided composite tubes

93

Finite element modeling of the resin transfer molding process based on homogenization techniques

94

Finite element modeling of the scratch response of a coated time-dependent solid

95

Finite element modeling of the shear capacity of RC beams strengthened with FRP sheets by considering different failure modes

96

Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process Original Research Article

97

Finite element modeling of the transient heat conduction between colliding particles

98

Finite element modeling of the tubular hydroforming process: Part 1. Strain rate-independent material model assumption

99

Finite element modeling of the uniaxial compression behavior of carbon microballoons Original Research Article

100

Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites

101

Finite element modeling of tire/terrain interaction: Application to predicting soil compaction and tire mobility

102

Finite element modeling of transmission laser microjoining process

103

Finite element modeling of transmission line under downburst wind loading

104

Finite element modeling of transverse impact on a ballistic fabric

105

Finite element modeling of transverse impact on a ballistic fabric

106

Finite element modeling of transverse impact on a ballistic fabric

107

Finite element modeling of tube hydroforming of polycrystalline aluminum alloy extrusions

108

Finite element modeling of ultrasonic surface rolling process

109

Finite element modeling of vibration and sound radiation from fluid-loaded damped shells

110

Finite element modeling of weld-bonded joints

111

Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction

112

Finite element modelling and analysis of bolted joints of 3D tubular structures

113

Finite element modelling and analysis of crack shape evolution in mode-I fatigue Middle Cracked Tension specimens

114

Finite element modelling and diffraction measurement of elastic strains during tensile deformation of HCP polycrystals

115

Finite element modelling and experimental modal testing of a three-dimensional framework

116

Finite element modelling and experimental modal testing of a three-dimensional framework

117

Finite element modelling and experimental modal testing of a three-dimensional framework

118

Finite element modelling and investigation of the behaviour of elastic infilled frames under monotonic loading

119

Finite element modelling and optimisation of net-shape metal forming processes with uncertainties

120

finite element modelling and simulation of the hysteretic ‎behaviour of single- and bi-metal cantilever beams using a ‎modified non-linear beta-damping model

121

Finite element modelling and strength analysis of hold No. 1 of bulk carriers

122

Finite element modelling and testing of an injection moulded generic tow reinforced structure

123

Finite element modelling and updating of a lively footbridge: The complete process

124

Finite element modelling approaches to the accurate dimensional prediction for a cold-Tforged part

125

Finite element modelling for fatigue stress analysis of large suspension bridges

126

Finite element modelling for the investigation of in-plane modes and damping shims in disc brake squeal

127

Finite element modelling investigations upon the influence of pocket die designs on metal flow in aluminium extrusion: Part II. Effect of pocket geometry configurations on metal flow

128

Finite element modelling of a rammed earth wall

129

Finite element modelling of a silo based on experimental modal analysis

130

Finite element modelling of a submerged arc welding process

131

Finite element modelling of a unilateral fixator for bone reconstruction: Importance of contact settings

132

Finite element modelling of abrasive waterjet milled footprints

133

Finite element modelling of Al/SiCp metal matrix composites with particles aligned in stripes—a 2D–3D comparison

134

Finite element modelling of an Al–Mn alloy by equal channel angular extrusion (ECAE)

135

Finite element modelling of anisotropic elastic-viscoplastic behaviour of metals

136

Finite element modelling of anisotropic elastic-viscoplastic behaviour of metals

137

Finite element modelling of anisotropic elasto-plastic timber composite beams with openings

138

Finite element modelling of axially crushed silk/epoxy composite square tubes

139

Finite Element Modelling of Ball Screw Feed Drive Systems

140

Finite element modelling of brazed residual stress and its influence factor analysis for stainless steel plate-fin structure

141

Finite element modelling of bridging micro-mechanics in through-thickness reinforced composite laminates

142

Finite element modelling of brittle fracture of thick coatings under normal and tangential loading

143

Finite element modelling of cable networks with flexible supports

144

Finite Element Modelling of Car Hood Panel for Pedestrian Protection during Impact

145

Finite element modelling of castellated timber I-joists

146

Finite element modelling of CFRP/steel double strap joints subjected to dynamic tensile loadings

147

Finite element modelling of closed cracks in eddy current testing

148

Finite element modelling of cold isostatic pressing

149

Finite element modelling of compartment masonry walls in fire

150

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

151

Finite element modelling of composite consolidation from fibre and wire lay-ups

152

Finite element modelling of composite consolidation from fibre and wire lay-ups

153

Finite element modelling of concrete cover separation failure in FRP plated RC beams

154

Finite element modelling of core thickness effects in aluminium foam/composite sandwich structures under flexural loading

155

Finite element modelling of crack growth and wear particle formation in sliding contact

156

Finite element modelling of crack propagation in carbohydrate extruded starch with open void structure

157

Finite element modelling of crack propagation in metal powder compaction using Mohr–Coulomb and Elliptical Cap yield criteria

158

Finite element modelling of cracked inelastic shells with large deflections: two-dimensional and three-dimensional approaches

159

Finite element modelling of crash response of composite aerospace sub-floor structures

160

Finite element modelling of damage induced by low-velocity impact on composite laminates

161

Finite element modelling of damage progression in non-crimp fabric reinforced composites

162

Finite element modelling of deformation characteristics of historical stone masonry shear walls

163

Finite element modelling of dissipative structures for nonequilibrium chemical reactions in fluid-saturated porous media Original Research Article

164

Finite element modelling of double skin composite slabs

165

FINITE ELEMENT MODELLING OF EXTENDED END-PLATE BEARING TYPE CONNECTION

166

Finite element modelling of fibre reinforced polymer sandwich panels exposed to heat

167

Finite element modelling of fibrous networks: Analysis of strain distribution in fibres under tensile load

168

Finite element modelling of flexible pavements on soft soil subgrades

169

Finite element modelling of flexural behaviour of externally bonded CFRP reinforced concrete structures

170

Finite element modelling of free surface flows on inclined and curved beds

171

Finite element modelling of fretting wear surface evolution: Application to a Ti–6A1–4V contact

172

Finite element modelling of frictional bridging during fatigue crack growth in fibre-reinforced metal matrix composites

173

Finite element modelling of frictional slip in heavy lift sling systems

174

Finite element modelling of glenohumeral kinematics following total shoulder arthroplasty

175

Finite element modelling of high air pressure forming processes for polymer sheets

176

Finite element modelling of hybrid active-passive vibration damping of multilayer piezoelectric sandwich beams - part I: Formulation

177

Finite element modelling of hybrid active-passive vibration damping of multilayer piezoelectric sandwich beams - part II: System analysis

178

Finite element modelling of impact on preloaded composite panels

179

FINITE ELEMENT MODELLING OF INFINITE EULER BEAMS ON KELVIN FOUNDATIONS EXPOSED TO MOVING LOADS IN CONVECTED CO-ORDINATES

180

FINITE ELEMENT MODELLING OF INTERNALLY PRESSURIZED CLOSED CELL COMPOSITES

181

Finite element modelling of ion transport in the electrolyte of a 3D-microbattery

182

Finite Element Modelling of Laboratory Tests on Reinforced Concrete Beams Containing Recycled Aggregate Concrete

183

FINITE ELEMENT MODELLING OF LAMINATED PIEZO-ELASTIC STRUCTURES: LYAPUNOV STABILITY ANALYSIS

184

Finite element modelling of load bearing cold-formed steel wall systems under fire conditions

185

Finite element modelling of low temperature forming of polymer films with application in in-mould decoration

186

Finite element modelling of low-speed femur reaming using reamers with irregular tooth spacing

187

Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation

188

FINITE ELEMENT MODELLING OF MAGNETIC CONSTRAINED LAYER DAMPING

189

Finite element modelling of medical devices

190

Finite element modelling of mixed film lubrication in cold strip rolling

191

Finite element modelling of moisture related and visco-elastic deformations in inhomogeneous timber beams

192

Finite element modelling of mooring lines Original Research Article

193

Finite element modelling of multiple cohesive discrete crack propagation in reinforced concrete beams

194

Finite element modelling of nanoscale inhomogeneities in an elastic matrix

195

Finite element modelling of orthotropic material behaviour in pneumatic membranes

196

Finite element modelling of overlapping abrasive waterjet milled footprints

197

Finite element modelling of passive damping with resistively shunted piezocomposites

198

Finite element modelling of piezolaminated smart structures for active vibration control with distributed sensors and actuators

199

Finite element modelling of plantar pressure beneath the second ray with flexor muscle loading

200

Finite element modelling of plastic instability during ECAP processing of flow-softening materials

201

Finite element modelling of plate girders with web openings

202

Finite element modelling of primary hip stem stability: The effect of interference fit

203

Finite Element Modelling of RC T Beams Reinforced Internally with GFRP Reinforcements

204

Finite element modelling of reinforced concrete framed structures including catenary action

205

Finite element modelling of reinforcement with bond

206

Finite element modelling of rubber-like materials — a comparison between simulation and experiment

207

Finite element modelling of rubber-like materials — a comparison between simulation and experiment

208

Finite element modelling of rubber-like polymers based on chain statistics

209

Finite element modelling of sandwich box column with viscoelastic layer for passive vibrations control under seismic loading

210

Finite element modelling of semi and nonpolar GaN/AlN quantum dots

211

Finite element modelling of semi-rigid composite joints

212

Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity

213

Finite Element Modelling of Single Cell Based on Atomic Force Microscope Indentation Method

214

Finite element modelling of skeletal muscles coupled with fatigue

215

Finite element modelling of skeletal muscles coupled with fatigue

216

Finite element modelling of solidification effects in mould filling

217

FINITE ELEMENT MODELLING OF SPATIALLY CHAOTIC STRUCTURES

218

Finite element modelling of steel-caged RC columns subjected to axial force and bending moment

219

Finite element modelling of structural stainless steel cross-sections

220

FINITE ELEMENT MODELLING OF STRUCTURES INCLUDING PIEZOELECTRIC ACTIVE DEVICES

221

Finite element modelling of surface tension effects using a Lagrangian-Eulerian kinematic description Original Research Article

222

Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools

223

Finite element modelling of temperature gradient driven rock alteration and mineralization in porous rock masses Original Research Article

224

Finite element modelling of tensile deformation and failure of aluminium plate exposed to fire

225

Finite element modelling of the actual structure of cellular materials determined by X-ray tomography

226

Finite element modelling of the actual structure of cellular materials determined by X-ray tomography Original Research Article

227

Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique

228

Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique

229

Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section

230

Finite element modelling of the effect of a functionally graded protective coating for SiC monofilaments on Ti-based composite behaviour

231

Finite element modelling of the effect of a functionally graded protective coating for SiC monofilaments on Ti-based composite behaviour

232

Finite element modelling of the effective elastic properties of partially saturated rocks

233

Finite element modelling of the electrical impulse induced fracture of a high voltage varistor

234

Finite element modelling of the evolution of pressure solution cleavage

235

Finite element modelling of the evolution of surface pits in metal forming processes

236

Finite element modelling of the flexural performance of resorbable phosphate glass fibre reinforced PLA composite bone plates

237

Finite element modelling of the fracture behaviour of brittle coatings

238

Finite element modelling of the inertia friction welding process between dissimilar materials

239

Finite element modelling of the mechanical behaviour of onion epidermis with incorporation of nonlinear properties of cell walls and real tissue geometry Original Research Article

240

Finite element modelling of the mechanical behaviour of vitreous starch/protein composite Original Research Article

241

Finite element modelling of the one meter drop test on a steel bar for the CASTOR cask Original Research Article

242

Finite element modelling of the pelvis: Inclusion of muscular and ligamentous boundary conditions

243

Finite element modelling of the progressive crushing of braided composite tubes under axial impact

244

Finite element modelling of the semi-rigid behaviour of pultruded FRP connections

245

Finite Element Modelling of the Steady Rolling of a Radial Tyre with Detailed Tread Pattern.

246

Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining

247

Finite element modelling of the tricuspid valve: A preliminary study

248

Finite element modelling of the vibrational behaviour of the human femur using CT-based individualized geometrical and material properties

249

Finite element modelling of thermal fatigue effects in IGBT modules

250

Finite element modelling of thermal transport in ceramic matrix composites

251

Finite element modelling of thermally bonded bicomponent fibre nonwovens: Tensile behaviour

252

Finite element modelling of thermally bonded nonwovens: Effect of manufacturing parameters on tensile stiffness

253

Finite element modelling of topographic effects on elastic ground deformation at Mt. Etna

254

Finite element modelling of two phase Fe–Cu polycrystals

255

Finite element modelling of unbending tests with damage approach and experimental verification

256

Finite element modelling of unreinforced masonry shear wallettes strengthened using twisted steel bars

257

Finite element modelling of viscosity-dominated hydraulic fractures

258

Finite element modelling of wall pressures in a cylindrical silo with conical hopper using an Arbitrary Lagrangian–Eulerian formulation

259

Finite element modelling of welded aluminium members subjected to four-point bending

260

Finite element modelling of wooden structures at large deformations and brittle failure prediction

261

Finite element modelling of z-pinned composite T-joints

262

Finite element modelling simulation of radial forging of tubes without mandrel

263

Finite element modelling simulation of transverse welding phenomenon in aluminium extrusion process

264

Finite element models and cyclic behavior of self-centering steel post-tensioned connections with web hourglass pins

265

Finite element models for laminated shells with actuation capability

266

Finite element models for nonlinear analysis of steel–concrete composite beams with partial interaction in combined bending and shear

267

Finite element models for use in mechanics including geological engineering

268

Finite element models in the steel industry: Part I: Simulation of flat product manufacturing processes

269

Finite element models in the steel industry: Part II: Analyses of tubular products performance

270

Finite element models in tissue mechanics and orthopaedic implant design

271

Finite element models of rib as an inhomogeneous beam structure under high-speed impacts

272

Finite element models of spot welds in structural dynamics: review and updating

273

Finite element models predict cancellous apparent modulus when tissue modulus is scaled from specimen CT-attenuation

274

Finite element models predict in vitro vertebral body compressive strength better than quantitative computed tomography

275

Finite element moving mesh analysis of phase change problems with natural convection

276

Finite element nonlinear dynamic analysis of sandwich plates with partially detached facesheet and core

277

Finite element numerical evaluation of elliptical hollow section steel columns in fire

278

Finite element numerical modeling of geogrid-reinforced shallow foundation’s behavior on loose soils

279

Finite element of slender beams in finite transformations: a geometrically exact approach

280

Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

281

Finite element planar stress analysis

282

Finite element plastic loads for circumferential cracked pipe bends under in-plane bending

283

Finite element prediction of crack formation induced by quenching in a forged valve

284

Finite element prediction of damping of composite GFRP and CFRP laminates – a hybrid formulation – vibration damping experiments and Rayleigh damping

285

Finite element prediction of damping of composite GFRP and CFRP laminates – a hybrid formulation – vibration damping experiments and Rayleigh damping

286

Finite element prediction of ductile fracture in sheet metal forming processes

287

FINITE ELEMENT PREDICTION OF DUCTILE FRACTURE INAUTOMOTIVE PANEL FORMING: COMPARISON BETWEEN FLD AND LEMAITRE DAMAGE MODELS

288

Finite element prediction of interfacial stresses in structural members bonded with a thin plate

289

Finite element prediction of proximal femur fracture pattern based on orthotropic behaviour law coupled to quasi-brittle damage

290

Finite element prediction of surface strain and fracture strength at the distal radius

291

Finite element prediction of the influence of confinement on RC beam–columns under single or double curvature bending

292

Finite Element Prediction of Transient Temperature Distribution in a Grain Storage Bin

293

Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification

294

Finite element prediction on the structural performance of profiled steel sheet dry board structural composite system proposed as a disaster relief shelter

295

Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials

296

Finite element predictions of residual stresses in press-braked thin-walled steel sections

297

Finite element procedure for solving contact thermoelastoplastic problems at large strains, normal and high pressures Original Research Article

298

Finite element procedures for nonlinear structures in moving coordinates. Part 1: Infinite bar under moving axial loads

299

Finite element procedures for nonlinear structures in moving coordinates. Part II: Infinite beam under moving harmonic loads

300

Finite element process modelling of inertia friction welding advanced nickel-based superalloy

301

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis Original Research Article

302

Finite Element Reconstruction of a Mandibular First Molar

303

Finite element recovery techniques for local quantities of linear problems using fundamental solutions

304

Finite element reduced order models for nonlinear vibrations of piezoelectric layered beams with applications to NEMS

305

Finite element reliability analysis of bridge girders considering moment–shear interaction

306

Finite element remeshing in metal forming using hexahedral elements

307

FINITE ELEMENT REMESHING: A METAL FORMING APPROACH FOR QUADRILATERAL MESH GENERATION AND REFINEMENT

308

Finite element resistivity modelling for three-dimensional structures with arbitrary anisotropy

309

Finite element response sensitivity analysis of multi-yield-surface J2 plasticity model by direct differentiation method

310

Finite Element Response Sensitivity Analysis of Steel-Concrete Composite Beams with Deformable Shear Connection

311

Finite element response sensitivity analysis using force-based frame models

312

Finite element response sensitivity analysis using three-field mixed formulation: general theory and application to frame structures

313

Finite element response sensitivity analysis: a comparison between force-based and displacement-based frame element models Original Research Article

314

Finite element schemes for non-linear problems in infinite domains

315

Finite element seismic safety assessment of water intake structures

316

Finite element shakedown analysis of reinforced concrete 3D frames

317

Finite element shakedown analysis of two-dimensional structures

318

Finite element simulation and analytical analysis for nano field emission sources that terminate with a single atom: A new perspective on nanotips

319

Finite element simulation and ANFIS prediction of dimensional error effect on distribution of BPP/GDL contact pressure in a PEM fuel cell

320

Finite element simulation and experiment in tube hydroforming of unequal T shapes

321

Finite element simulation and experimental investigation of forming micro-gear with Zr–Cu–Ni–Al bulk metallic glass

322

Finite element simulation and experimental investigation on the forming forces of 3D non-axisymmetrical tubes spinning

323

Finite element simulation and experimental investigation on the forming forces of 3D non-axisymmetrical tubes spinning

324

Finite element simulation and experimental investigation on thermal conductivity of diamond/aluminium composites with imperfect interface

325

Finite Element Simulation and Experimental Study on Energy Absorption of 3D Woven Glass Fiber Composite Sandwich Panels

326

Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation

327

Finite element simulation and experimental validation of fretting wear

328

Finite element simulation and experimental validation of residual stresses in high speed dry milling of biodegradable magnesium–calcium alloys

329

Finite element simulation and model optimization of blankholder gap and shell element type in the stamping of a washing-trough

330

Finite Element simulation coupled to optimisation stochastic process to assess the effect of heat treatment on the mechanical properties of 42CrMo4 steel

331

Finite element simulation for analysing experimental friction tests under severe conditions

332

Finite element simulation for charge–discharge cycle of cryo-adsorptive hydrogen storage on activated carbon

333

Finite element simulation for die-cavity compensation

334

Finite element simulation for dynamic large elastoplastic deformation in metal powder forming

335

Finite element simulation for fluid–solid coupling effect on depressurization-induced gas production from gas hydrate reservoirs

336

Finite element simulation for interfacial evolutions

337

Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation Original Research Article

338

Finite element simulation for superplastic forming using a non-Newtonian viscous thick section element

339

Finite Element Simulation in Superplastic forming of Friction Stir Welded Aluminium Alloy 6061-T6

340

Finite element simulation of 3D sheet metal guillotining using advanced fully coupled elastoplastic-damage constitutive equations

341

Finite element simulation of a coating formation on a turbine blade during plasma spraying

342

Finite element simulation of a layout optimisation technique by photoelastic stress minimisation

343

Finite element simulation of a new deformation type occurring in changing-channel extrusion

344

Finite element simulation of a polycrystalline ferroelectric based on a multidomain single crystal switching model

345

Finite Element simulation of a slow moving natural slope in the Upper-Austrian Alps using a visco-hypoplastic constitutive model

346

Finite element simulation of a turbulent MHD system: comparison to a pseudo-spectral simulation Original Research Article

347

Finite element simulation of a twin-cam 16-valve cylinder structure

348

Finite element simulation of a two-phase viscoplastic material: calculation of the mechanical behaviour

349

Finite element simulation of acoustic cavitation in the reservoir and effects on dynamic response of concrete dams

350

Finite element simulation of anisotropic damage accumulation and creep in acrylic bone cement

351

Finite element simulation of arcuates for astigmatism correction

352

Finite element simulation of barge impact into a rigid wall

353

FINITE ELEMENT SIMULATION OF BLANKING PROCESS

354

Finite element simulation of blood flow in the cerebral artery Original Research Article

355

Finite Element simulation of buckling-induced vein tortuosity and influence of the wall constitutive properties

356

Finite element simulation of bulge forming of a cross-joint from a tubular blank

357

Finite element simulation of cell–substrate decohesion by laser-induced stress waves

358

Finite element simulation of chip flow in metal machining

359

Finite element simulation of chip flow in metal machining

360

Finite element simulation of chip flow in metal machining

361

Finite element simulation of chip formation in orthogonal metal cutting

362

Finite element simulation of cold isostatic pressing and sintering of SiC components

363

Finite element simulation of cold rolling of thin strip

364

Finite Element Simulation of Cold-Rolling Process of Shaped Steel Tube for Driving Shaft Original Research Article

365

Finite element simulation of compressible particle-laden gas flows

366

Finite Element Simulation of Contact Mechanics of Cancer Cells in Manipulation Based on Atomic Force Microscopy

367

Finite element simulation of conventional and high speed machining of Ti6Al4V alloy

368

Finite element simulation of crack growth path and stress intensity factors evaluation in linear elastic materials

369

Finite element simulation of cross equal channel angular pressing

370

Finite element simulation of debonding in FRP-to-concrete bonded joints

371

Finite element simulation of deep bed filtration

372

Finite element simulation of deep cryogenic treatment incorporating transformation kinetics

373

Finite Element Simulation of Deep Drawing of Tailored Heat Treated Blanks

374

Finite element simulation of deformation behavior of pure aluminum during equal channel angular pressing

375

Finite element simulation of deformation behavior of semi-crystalline polymers with multi-spherulitic mesostructure

376

Finite element simulation of deformation behavior of semi-crystalline polymers with multi-spherulitic mesostructure

377

Finite element simulation of delamination growth in composite materials using LS-DYNA

378

Finite element simulation of dense wire packings

379

Finite element simulation of die design for hot extrusion process of Al/Cu clad composite and its experimental investigation

380

Finite element simulation of dislocation generation in doped and undoped GaAs single crystals grown from the melt

381

Finite Element Simulation of Displaced ZMC Fracture After Fixation with Resorbable and Non-Resorbable One-Point Mini-Plates and Applying Normal to Severe Occlusal Loads

382

Finite element simulation of drying of mango

383

FINITE ELEMENT SIMULATION OF DYNAMIC BEHAVIOUR OF OPEN-ENDED CANTILEVER PIPE CONVEYING FLUID

384

Finite Element simulation of dynamic buckling of cylinders subjected to periodic shear

385

Finite element simulation of dynamic fracture and fragmentation of glass rods Original Research Article

386

Finite element simulation of dynamic strain-localization: A multi-scale problem Original Research Article

387

Finite element simulation of dynamic wetting flows as an interface formation process

388

Finite element simulation of early creep and wear in total hip arthroplasty

389

Finite element simulation of elastohydrodynamic lubrication of soft biological tissues

390

Finite element simulation of electrochemical ac diffusional impedance. Application to recessed microdiscs

391

Finite element simulation of electrochemically reversible, quasi-reversible and irreversible linear sweep voltammetry at the wall tube electrode

392

Finite element simulation of equal channel angular extrusion

393

Finite element simulation of explosively-driven plate impact with application to explosive welding

394

Finite element simulation of fine blanking processes using a pressure-dependent damage model

395

Finite Element Simulation of Forced Convection in a Flat Plate Solar Collector: Influence of Nanofluid with Double Nanoparticles

396

Finite element simulation of fracture behaviour for aged duplex stainless steels

397

Finite element simulation of fretting wear and fatigue in thin steel wires

398

Finite element simulation of heat and mass transfer in activated carbon hydrogen storage tank

399

FINITE ELEMENT SIMULATION OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 7050

400

Finite element simulation of high speed pulse welding of high specific strength metal alloys

401

Finite element simulation of high-pressure water-jet assisted metal cutting

402

Finite element simulation of high-pressure water-jet assisted metal cutting

403

Finite element simulation of high-pressure water-jet assisted metal cutting

404

Finite element simulation of high-speed cutting forces

405

Finite Element Simulation of Hot Strip Continuous Rolling Process Coupling Microstructural Evolution Original Research Article

406

Finite element simulation of hydromagnetic convective flow in an obstructed cavity

407

Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts

408

Finite element simulation of interface cracks in thermal barrier coatings

409

Finite element simulation of interfacial segregation in dilute alloys

410

Finite element simulation of jetting behaviour in metal injection molding using remeshing scheme

411

Finite element simulation of large-strain single-crystal viscoplasticity: An investigation of various hardening relations

412

Finite element simulation of laser tube bending: Effect of scanning schemes on bending angle, distortions and stress distribution

413

Finite element simulation of low velocity impact on shape memory alloy composite plates

414

Finite element simulation of low-density thermally bonded nonwoven materials: Effects of orientation distribution function and arrangement of bond points

415

Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian–Eulerian formulation Original Research Article

416

Finite element simulation of magnesium alloy sheet forming at elevated temperatures

417

Finite element simulation of magnesium alloys laser beam welding

418

Finite element simulation of magnetoconvection inside a sinusoidal corrugated enclosure with discrete isoflux heating from below

419

Finite element simulation of martensitic phase transitions in elastoplastic materials

420

Finite element simulation of martensitic transition based on thermo-mechanical model

421

Finite element simulation of mass transfer in laminar swirling decaying flow induced by means of a tangential inlet in an annulus Original Research Article

422

Finite element simulation of metal casting

423

Finite element simulation of metal forming and in-plane crack propagation using ductile continuum damage model

424

Finite element simulation of MHD combined convection through a triangular wavy channel

425

Finite element simulation of micro-imprinting in Mg–Cu–Y amorphous alloy

426

Finite element simulation of microstructure evolution during friction stir welding of automotive aluminum parts

427

Finite element simulation of mixed convection heat and mass transfer in a right triangular enclosure

428

Finite element simulation of mode I dynamic, ductile fracture initiation

429

Finite element simulation of mold filling using marker particles and the k-ϵ model of turbulence Original Research Article

430

Finite element simulation of mold filling using marker particles and the κ-ϵ model of turbulence Original Research Article

431

Finite element simulation of moldboard–soil interaction

432

Finite element simulation of multi-point sheet forming process based on implicit scheme

433

Finite element simulation of nano-indentation experiment on aluminum 1100

434

Finite element simulation of natural convection flow in a trapezoidal enclosure filled with porous medium due to uniform and non-uniform heating

435

Finite element simulation of natural convection within porous trapezoidal enclosures for various inclination angles: Effect of various wall heating

436

Finite element simulation of non-linear acoustic generation in a horn loudspeaker

437

Finite element simulation of nonlinear viscous fingering in miscible displacements with anisotropic dispersion and nonmonotonic viscosity profiles

438

Finite element simulation of Pellet-Cladding Interaction (PCI) in nuclear fuel rods

439

Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon

440

Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon

441

Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon

442

Finite element simulation of plasticity induced crack closure with different material constitutive models

443

Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model

444

Finite element simulation of polymer behaviour using a three-dimensional, finite deformation constitutive model

445

Finite element simulation of powder forming and sintering Original Research Article

446

Finite element simulation of profile rolling of wire

447

Finite element simulation of PSB macroband nucleation and propagation in single crystal nickel cycled at low plastic strain amplitudes

448

Finite element simulation of pulsed laser ablation of titanium carbide

449

Finite Element Simulation of Pyroplastic Deformation, Anisotropic Shrinkage and Heterogeneous Densification for Ceramic Materials During Liquid Phase Sintering Process

450

Finite element simulation of quench distortion in a low-alloy steel incorporating transformation kinetics Original Research Article

451

Finite element simulation of residual stress of double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings using birth and death element technique

452

Finite element simulation of residual stresses and their measurement by contour method

453

Finite element simulation of response of buried shelters to blast loadings

454

Finite element simulation of selective superplastic forming of friction stir processed 7075 Al alloy

455

Finite element simulation of shaped charges

456

Finite element simulation of single crystal growth process using GSMAC method

457

Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion

458

Finite element simulation of springback for a channel draw process with drawbead using different hardening models

459

Finite element simulation of springback for a channel draw process with drawbead using different hardening models

460

Finite element simulation of springback in sheet metal forming

461

Finite element simulation of steel ring fragmentation under radial expansion

462

Finite element simulation of stent and balloon interaction

463

Finite element simulation of straight plunge grinding for advanced ceramics

464

Finite element simulation of strain induced austenite–martensite transformation and fine grain production in stainless steel

465

Finite element simulation of strain localization with large deformation: capturing strong discontinuity using a Petrov–Galerkin multiscale formulation Original Research Article

466

Finite element simulation of stress distribution and development in 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings during thermal shock

467

Finite element simulation of surface deformation of polycrystal with a rough surface under repeated load

468

Finite element simulation of surface micro-indentation behavior of yttria stabilized zirconia thermal barrier coatings with microstructural characteristic of columnar grains and sub-grains based on a nonlinear contact model

469

Finite element simulation of tensile bond strength of atmospheric plasma spraying thermal barrier coatings

470

Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section

471

Finite element simulation of the cold forging process having a floating die

472

Finite element simulation of the cyclic behaviour of end-plate joints

473

Finite element simulation of the dynamical behavior of a speed-increase gearbox

474

Finite Element simulation of the edge-trimming/cold rolling sequence: Analysis of edge cracking

475

Finite element simulation of the effect of clearance on the forming quality in the blanking process

476

Finite element simulation of the effect of surface roughness on nanoindentation of thin films with spherical indenters

477

Finite element simulation of the effects of process parameters on deposition uniformity of chemical-vapor-deposited silicon carbide

478

Finite element simulation of the electromagnetic piercing of sheet metal

479

Finite element simulation of the filling of thin moulds

480

Finite element simulation of the Flow-Splitting-Process

481

Finite element simulation of the hip joint during stumbling: a comparison between static and dynamic loading

482

Finite element simulation of the hysteretic behaviour of an industrial rubber. Application to design of rubber components

483

Finite element simulation of the manufacturing process chain of a sheet metal assembly

484

Finite element simulation of the mechanics of flat contact pad fretting fatigue tests

485

Finite element simulation of the motion of a rigid body in a fluid with free surface Original Research Article

486

Finite element simulation of the orthogonal metal cutting process for qualitative understanding of the effects of crater wear on the chip formation process

487

Finite element simulation of the Piobert–Lüders behavior in an uniaxial tensile test

488

Finite element simulation of the Piobert–Lüders behavior in an uniaxial tensile test

489

Finite element simulation of the pressure dip in sandpiles

490

Finite element simulation of the punching/blanking process using in-process characterisation of mild steel

491

Finite element simulation of the punchless piercing process with Lemaitre damage model

492

Finite element simulation of the punchless piercing process with Lemaitre damage model

493

Finite element simulation of the punchless piercing process with Lemaitre damage model

494

Finite element simulation of the residual stresses in high strength carbon steel butt weld incorporating solid-state phase transformation

495

Finite element simulation of the rolling and extrusion of multi-phase materials Application to the rolling of prepared sugar cane Original Research Article

496

Finite element simulation of the shearing mechanism in the blanking of sheet metal

497

Finite element simulation of the simple tension test in metals

498

Finite element simulation of the steel plates hot rolling process

499

Finite element simulation of the stress distribution of equal-cross section lateral extrusion

500

Finite element simulation of the stress distribution of equal-cross section lateral extrusion

501

Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting

502

Finite element simulation of the tube hydroforming process—bending, preforming and hydroforming

503

Finite element simulation of the warm deep drawing process in forming a circular cup from magnesium alloy sheet

504

Finite element simulation of the wind action over bridge sectional models: Application to the Guamل River Bridge (Parل State, Brazil)

505

Finite element simulation of thermal barrier coating performance under thermal cycling

506

Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws

507

Finite element simulation of thermoforming processes for polymer sheets Original Research Article

508

Finite element simulation of thin liquid film flow and heat transfer including a hydraulic jump

509

Finite element simulation of tip test with an aluminum alloy

510

Finite Element Simulation of Twin-Roll Casting Process with an Implementation of Slip/ Friction Boundary Condition

511

Finite Element Simulation of Twin-Roll Casting Process with an Implementation of Slip/ Friction Boundary Condition

512

Finite element simulation of twopoint incremental forming of freeform parts

513

Finite element simulation of warm deep drawing of aluminium alloy sheet when accounting for heat conduction

514

Finite element simulation of wave propagation in an axisymmetric bar

515

Finite Element Simulation of Web Falling During Heavy Rail Roller Straightening

516

Finite Element Simulation on Crack Analysis of a Thick-Tube

517

Finite element simulation on mechanical and structural properties of cold-formed dimpled steel

518

Finite element simulation on strain-induced martensitic transformation effects in TRIP steel sheet forming

519

Finite element simulation on superplastic blow forming of diffusion bonded 4 sheets

520

Finite element simulation prior to reconstruction of a steel railway bridge to reduce structure-borne noise

521

Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions

522

Finite element simulation to investigate interaction between crack and particulate reinforcements in metal-matrix composites

523

Finite element simulation to investigate interaction between crack and particulate reinforcements in metal-matrix composites

524

Finite Element Simulationon Damage and Fracture Properties of a Ring Cut from Filament-Wound Pipes with and without Delamination

525

Finite element simulations of chemo-mechanical coupling in elastic–plastic homoionic expansive clays Original Research Article

526

Finite element simulations of compositionally graded InGaN solar cells

527

Finite element simulations of crack propagation in functionally graded materials under flexural loading

528

Finite element simulations of ductile rupture in a constrained metal foil

529

Finite element simulations of ductile rupture in a constrained metal foil

530

Finite element simulations of dynamics of multivariant martensitic phase transitions based on Ginzburg–Landau theory

531

Finite element simulations of dynamics of multivariant martensitic phase transitions based on Ginzburg–Landau theory

532

Finite element simulations of elasto-plastic processes in Nb3Sn strands Original Research Article

533

Finite element simulations of elasto-plastic processes in Nb3Sn strands Original Research Article

534

Finite element simulations of electrostatic dopant potentials in thin semiconductor specimens for electron holography

535

Finite element simulations of electrostatic dopant potentials in thin semiconductor specimens for electron holography

536

Finite element simulations of low-mass readout cables for the CBM Silicon Tracking System using RAPHAEL

537

Finite element simulations of low-mass readout cables for the CBM Silicon Tracking System using RAPHAEL

538

Finite element simulations of martensitic phase transitions and microstructures based on a strain softening model

539

Finite element simulations of natural convection flow in an isosceles triangular enclosure filled with a porous medium: Effects of various thermal boundary conditions

540

Finite element simulations of orthotropic hyperelasticity

541

Finite element simulations of sheet-metal forming processes for planar-anisotropic materials

542

Finite element simulations of sheet-metal forming processes for planar-anisotropic materials

543

Finite element simulations of sheet-metal forming processes for planar-anisotropic materials

544

Finite element simulations of static and sliding contact between a human fingertip and textured surfaces

545

Finite element simulations of textile composite forming including the biaxial fabric behaviour

546

Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography

547

Finite element simulations of ultrasonically assisted turning

548

Finite element simulations on the mechanical properties of MHS materials

549

Finite element simulations using symbolic computing Original Research Article

550

Finite element sintering analysis of metal injection molded copper brown body using thermo-physical data and kinetics

551

Finite element solution for flow of a third grade fluid past a horizontal porous plate with partial slip

552

Finite element solution for intermittent-contact problem with piezoelectric actuation in ring type USM

553

Finite element solution for the continuum traffic equilibrium problems

554

Finite element solution of a class of parabolic integro-differential equations with inhomogeneous jump conditions using FreeFEM++

555

Finite element solution of a membrane covered electrode problem

556

FINITE ELEMENT SOLUTION OF A MODEL FREE SURFACE PROBLEM BY THE OPTIMAL SHAPE DESIGN APPROACH

557

Finite element solution of a Reynolds–Koiter coupled problem for the elastic journal–bearing Original Research Article

558

Finite element solution of compressible viscous flows using conservative variables Original Research Article

559

Finite element solution of Dirichletʹs nonlinear partial differential equation with mixed boundary conditions Original Research Article

560

Finite element solution of electromagnetic problems over a wide frequency range via the Padé approximation Original Research Article

561

Finite element solution of free-surface ship-wave problems

562

Finite Element Solution of Heat and Mass Transfer in MHD Flow of a Viscous Fluid past a Vertical Plate under Oscillatory Suction Velocity

563

Finite Element Solution of Heat and Mass Transfer in MHD Flow of a Viscous Fluid past a Vertical Plate under Oscillatory Suction Velocity

564

FINITE ELEMENT SOLUTION OF INCOMPRESSIBLE FLUID-STRUCTURE VIBRATION PROBLEMS

565

Finite Element Solution of MHD Transient Flow past an Impulsively Started Infinite Horizontal Porous Plate in a Rotating Fluid with Hall Current

566

Finite Element Solution of MHD Transient Flow past an Impulsively Started Infinite Horizontal Porous Plate in a Rotating Fluid with Hall Current

567

Finite element solution of new displacement/pressure poroelastic models in acoustics Original Research Article

568

Finite element solution of nonlinear eddy current problems with periodic excitation and its industrial applications

569

Finite element solution of radiative transfer across a slab with variable spatial refractive index

570

Finite element solution of surface-tension driven flows in laser surface-melting

571

Finite element solution of the 3D mold filling problem for viscous incompressible fluid Original Research Article

572

Finite element solution of the Helmholtz equation with high wave number Part I: The h-version of the FEM

573

Finite element solution of the Navier-Stokes equations for incompressible flow using a segregated algorithm Original Research Article

574

Finite element solution of the stability problem for nonlinear undamped and damped systems under nonconservative loading

575

Finite element solution of the Stokes problem with dominating Coriolis force Original Research Article

576

Finite element solutions for optimal square plates

577

Finite element solutions for optimal square plates

578

Finite element solutions for optimal square plates

579

Finite element solutions for plane strain mode I crack with strain gradient effects

580

Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods

581

Finite element solutions of heat transfer in molten polymer flow in tubes with viscous dissipation

582

FINITE ELEMENT SOLUTIONS WITH FEEDBACK NETWORK MECHANISM THROUGH DIRECT MINIMIZATION OF ENERGY FUNCTIONALS

583

Finite element spherical harmonics (PN) solutions of the three-dimensional Takeda benchmark problems

584

Finite element stabilization parameters computed from element matrices and vectors Original Research Article

585

Finite element stress analysis and strength evaluation of epoxy-steel cylinders subjected to impact push-off loads

586

Finite element stress analysis of a reinforced high-strength concrete column in severe fires

587

Finite element stress analysis of left ventricular mechanics in the beating dog heart

588

FINITE ELEMENT STRESS ANALYSIS ON NATURAL GAS MOTORCYCLE INTAKE MANIFOLD

589

FINITE ELEMENT STRESS EXTRACTION BY THE COMPLEMENTARY ENERGY PRINCIPLE

590

Finite Element Studies of Asphalt Concrete Pavement Reinforced with Geogrid

591

Finite Element Studies on Friction Stir Welding Processes of Polyethylene Plates

592

Finite element studies on friction stir welding processes of tailored blanks

593

Finite Element studies on indentation size effect using a higher order strain gradient theory

594

Finite element study of a wrist prosthesis

595

Finite element study of behavior and interface force conditions of seven-wire strand under axial and lateral loading

596

Finite element study of composite cuff connections for pultruded box sections

597

Finite element study of compressively loaded fibres fractured during impact

598

Finite element study of high-speed blunt impact on thorax: linear elastic considerations

599

Finite element study of mixed convection for non-Newtonian fluid between two coaxial rotating cylinders

600

Finite element study of multi-modal vibration damping for thermal barrier coating applications

601

Finite element study of nonlinear two-dimensional deoxygenated biomagnetic micropolar flow

602

Finite element study of steel beams reinforced while under load

603

Finite element study of steel single angle beam–columns

604

Finite element study of the effect of some local defects on the risk of transverse cracking in continuous casting of steel slabs Original Research Article

605

Finite element study of the energy dissipation and residual stresses in the closed elastic deformation path

606

Finite element study of the Lorentz model in metamaterials

607

Finite element study of trochanteric gamma nail for trochanteric fracture

608

FINITE ELEMENT SURFACE MODEL FOR FLOW AROUND VERTICAL WALL ABUTMENTS

609

Finite element synthesis of structural or acoustic receptances in view of practical design applications

610

Finite element technique for design of stub columns

611

Finite element techniques for dynamic crack analysis in piezoelectrics

612

Finite element techniques for the free-vibration and seismic analysis of liquid-storage tanks

613

Finite element techniques for wind engineering

614

Finite element techniques for wind engineering

615

Finite element theory for curved and twisted beams based on exact solutions for three-dimensional solids Part 1: Beam concept and geometrically exact nonlinear formulation Original Research Article

616

Finite element theory for curved and twisted beams based on exact solutions for three-dimensional solids Part 2: Anisotropic and advanced beam models Original Research Article

617

Finite element thermal analysis of special building components

618

FINITE ELEMENT TRANSIENT DYNAMIC ANALYSIS OF LAMINATED STIFFENED SHELLS

619

Finite element treatment of two-dimensional thermoelastic wear problems Original Research Article

620

Finite element tree crown hydrodynamics model (FETCH) using porous media flow within branching elements: A new representation of tree hydrodynamics

621

Finite element variational formulation for beams with discontinuities

622

Finite element verification in the case of missing data

623

Finite element vibration analysis of a partially covered cantilever beam with concentrated tip mass

624

Finite element vibration analysis of beams, plates and shells A bibliography (1994-1998)

625

Finite element vibration analysis of beams, plates and shells A bibliography (1994-1998)

626

Finite element vibration analysis of composite box structures using the high order plate theory

627

Finite element vibration analysis of laminated composite folded plate structures

628

Finite element vibration analysis of laminated composite folded plate structures

629

FINITE ELEMENT VIBRATION ANALYSIS OF ROTATING TIMOSHENKO BEAMS

630

Finite element wavelets with improved quantitative properties

631

Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations

632

Finite element/boundary element analysis of viscoelastic and viscoplastic problems a bibliography (1994–1996)

633

Finite element/volume solution to axisymmetric conservation laws

634

Finite elementanalysis of dovetail joint made with the use of CNC technology

635

Finite Element-Based Algorithms to Make Cuts for Magnetic Scalar Potentials: Topological Constraints and Computational Complexity

636

Finite element-based analysis of shunted piezoelectric structures for vibration damping

637

Finite element-based approach to modeling heterogeneous objects

638

Finite element-based fatigue behaviour of springs in automobile suspension

639

Finite element-based force identification of sliding support systems: Part II—Numerical investigation

640

Finite element-based force identification of sliding support systems: Part I—Theory

641

Finite element-based multi-phase modelling of shape memory polymer stents

642

Finite element-based simulation of a metal hydride-based hydrogen storage tank

643

Finite Element-Based Structural Reliability Assessment Using Efficient Directional Simulation

644

Finite element-based three-dimensional stress analysis of composite bonded repairs to metallic aircraft structure

645

FINITE ELEMENT-BASED VIBRATION ANALYSIS OF WWER-440 REACTORS

646

Finite element–boundary integral methods in electromagnetics

647

Finite elements analysis of heteroepitaxial SiGe layers grown by excimer laser

648

Finite Elements Analysis of the Hyperelastic Impeller Rotating in the Self-Priming Pump

649

Finite elements and object-oriented implementation techniques in computational fluid dynamics Original Research Article

650

Finite elements based on a first-order shear deformation moderate rotation shell theory with applications to the analysis of composite structures

651

Finite elements computation for the elastic properties of a regular stacking of hollow spheres

652

Finite elements computation for the elastic properties of a regular stacking of hollow spheres

653

Finite elements computation for the elastic properties of a regular stacking of hollow spheres

654

Finite elements for 2D problems of pressurized membranes

655

Finite elements for cohesive-frictional material

656

Finite elements for elasticity with microstructure and gradient elasticity

657

Finite elements for elliptic problems with stochastic coefficients Original Research Article

658

Finite elements for elliptic problems with wild coefficients Original Research Article

659

Finite elements for fluid–structure interaction in ALE and fully Eulerian coordinates

660

Finite elements for functionally graded Reissner–Mindlin plates Original Research Article

661

Finite elements for materials with strain gradient effects

662

Finite elements for stochastic media problems Original Research Article

663

FINITE ELEMENTS FOR THREE-MODE INTERACTION IN BUCKLING ANALYSIS

664

Finite elements in fluids: Special methods and enhanced solution techniques

665

Finite elements in fluids: Stabilized formulations and moving boundaries and interfaces

666

Finite elements in space and time for generalized viscoelastic maxwell model

667

Finite elements in space and time for parallel computing of viscoelastic deformation

668

Finite elements in task-level animation

669

Finite elements modelling of scattering problems for flexural waves in thin plates: Application to elliptic invisibility cloaks, rotators and the mirage effect

670

Finite elements numerical solution of a coupled profile–velocity–temperature shallow ice sheet approximation model

671

Finite Elements on Dyadic Grids with Applications Original Research Article

672

Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality

673

Finite elements solutions to magnetostriction.: I. Harmonic modelling

674

Finite elements solutions to magnetostriction.: II. Transient and non-linear modelling

675

Finite elements using absolute nodal coordinates for large-deformation flexible multibody dynamics

676

Finite elements with embedded branching

677

Finite elements with embedded displacement discontinuity: a generalized variable formulation

678

Finite elements with embedded strong discontinuities for the modeling of failure in solids

679

Finite elements, genetic algorithms and (beta)-splines: a combined technique for shape optimization

680

Finite elements, genetic algorithms and (beta)-splines: a combined technique for shape optimization

681

Finite elements: Their design and performance : by Richard H. MacNeal, Marcel Decker, New York, 1993

682

Finite energy solutions in three-dimensional heterotic string theory Original Research Article

683

Finite Energy Solutions of Maxwellʹs Equations and Constructive Hodge Decompositions on Nonsmooth Riemannian Manifolds

684

Finite energy sum rule determination of the scalar meson decay constants and the nature of the a0(980) Original Research Article

685

Finite Energy Sum Rules in Potential Scattering

686

Finite escapes and convergence properties of guaranteed-cost robust filters

687

Finite Euclidean graphs and Ramanujan graphs

688

Finite euclidean ramsey theory

689

Finite Eulerian posets which are binomial, Sheffer or triangular

690

Finite exchangeability and linear regression

691

Finite expiry Russian options

692

Finite extension across the South Vietnam basins from 3D gravimetric modelling: relation to South China Sea kinematics

693

Finite extensions of A-solvable abelian groups

694

Finite extinction and null controllability via delayed feedback non-local actions Original Research Article

695

Finite extinction time for nonlinear parabolic equations with nonlinear mixed boundary data Original Research Article

696

Finite extinction time for nonlinear parabolic equations with nonlinear mixed boundary data: [Nonlinear Anal. 31 (1998) 1–13]

697

Finite factorization equations and sum rules for BPS correlators in N=4 SYM theory Original Research Article

698

Finite Fault Modeling in a Tsunami Warning Center Context

699

Finite fermion density effects on the electroweak string

700

Finite field arithmetic using quasi-normal bases

701

Finite field multiplier using redundant representation

702

Finite Field Towers: Iterated Presentation and Complexity of Arithmetic,

703

Finite field-dependent symmetries in perturbative quantum gravity Original Research Article

704

Finite Fields and Ramanujan Graphs

705

Finite Fields, Root Systems, and Orbit Numbers of Chevalley Groups

706

Finite fields; Irreducible polynomials

707

Finite flag-transitive projective planes: a survey and some remarks Original Research Article

708

Finite foliations and similarity interval exchange maps

709

Finite form of the quintuple product identity

710

Finite formation time effects in inclusive and semi-inclusive electro-disintegration of few-body nuclei Original Research Article

711

Finite formulation and domain-integrated field relations in electromagnetics - a synthesis

712

Finite Formulation of the Electromagnetic Field

713

Finite Fourier Probability Distribution and Applications

714

Finite Fourier Probability Distribution and Applications

715

Finite Fourier transforms computed by a modified Filon–Euler–Maclaurin method Original Research Article

716

Finite fractal dimension of pullback attractors for non-autonomous 2D Navier–Stokes equations in some unbounded domains Original Research Article

717

Finite fractal dimension of the global attractor for a class of non-Newtonian fluids Original Research Article

718

Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension

719

Finite fracture mechanics analysis using the scaled boundary finite element method

720

Finite Fracture Mechanics at elastic interfaces

721

Finite Fracture Mechanics model for mixed mode fracture in adhesive joints

722

Finite fracture mechanics: A coupled stress and energy failure criterion

723

Finite free generating sets Original Research Article

724

Finite frequency phonon effects in spin-Peierls systems

725

Finite gain l/sub p/ stabilization of discrete-time LinearSystems subject to actuator Saturation: The case of p=1

726

Finite gain stabilization of discrete-time linear systems subject to actuator saturation

727

Finite gap Jacobi matrices: An announcement

728

Finite gauge theory on fuzzy image Original Research Article

729

Finite generalized quadrangles as the union of few large subquadrangles Original Research Article

730

Finite generation and presentability of wreath products of monoids

731

Finite generation of Ext for a generalization of D-Koszul algebras

732

Finite generation of rings of differential operators of semigroup algebras

733

Finite Generation of the Invariants of Finite Dimensional Hopf Algebras Original Research Article

734

Finite Generation of the Invariants of Finite Dimensional Hopf Algebras Original Research Article

735

Finite Geometries, First Irsee Conference, 16–21 February, 2003

736

Finite geometry and the Gale transform

737

Finite good filtration dimension for modules over an algebra with good filtration

738

Finite grain-element analysis and its experimental confirmation of micro-yoke forming

739

Finite grand unified theories and the quark mixing matrix

740

Finite graphs and amenability ✩

741

Finite graphs have unique symmetric products

742

Finite graphs that are inverse limits with a set valued function on

743

Finite Gratings at High Frequencies

744

Finite Griffith crack propagating in a non-homogeneous medium

745

FINITE GROUND CPW-FED UWB ANTENNA OVER THE METALLIC CYLINDRICAL SURFACES

746

Finite ground plane effects on broad-band dual polarized patch antenna properties

747

Finite group actions on C*-algebras with the Rohlin property—II

748

Finite Group Discretization of Yang–Mills and Einstein Actions

749

Finite Group Elements where No Irreducible Character Vanishes

750

Finite Group Factorizations and Braiding Original Research Article

751

Finite Group Factorizations and Braiding Original Research Article

752

Finite group modular data Original Research Article

753

Finite Group Modular Field Extensions, Green Theory and Absolutely Indecomposable and Simple Modules

754

Finite groups admitting a connected cubic integral bi-Cayley graph

755

Finite Groups Admitting a Fixed-Point-Free Automorphism Group Original Research Article

756

Finite Groups Admitting a Fixed-Point-Free Automorphism Group Original Research Article

757

Finite Groups Admitting ap-Solvable Operator Group,

758

Finite groups admitting grassmannian 4-designs

759

Finite groups all of whose abelian subgroups are QTI-subgroups

760

Finite groups all of whose proper centralizers are cyclic

761

Finite groups and approximate fibrations

762

Finite Groups Containing Many Subgroups Are Solvable Original Research Article

763

Finite Groups Containing Many Subgroups Are Solvable Original Research Article

764

Finite groups have even more centralizers

765

Finite groups having a standard component L of type or

766

Finite Groups Having Chain Difference One Original Research Article

767

Finite Groups Having Chain Difference One Original Research Article

768

Finite Groups in Which Different Conjugacy Classes Have Different Cardinalities Original Research Article

769

Finite Groups in Which Different Conjugacy Classes Have Different Cardinalities Original Research Article

770

Finite Groups in which Primary Subgroups have Cyclic Cofactors

771

Finite Groups of Chain Difference One,

772

Finite groups of essential dimension one

773

Finite groups of G2(3)-type

774

Finite groups of the same type as Suzuki groups

775

Finite Groups over Arithmetical Rings and Globally Irreducible Representations,

776

Finite Groups Possessing a Faithful Nonlinear Irreducible Character with Three Classes of Algebraically Conjugate Values

777

Finite groups whose abelian subgroups are TI-subgroups

778

Finite groups whose all irreducible character degrees are Hall-numbers

779

Finite groups whose minimal subgroups are weakly H*-subgroups

780

Finite groups with $X$-quasipermutable subgroups of prime power order

781

FINITE GROUPS WITH A MINIMAL FRATTINI SUBGROUP PROPERTY

782

Finite groups with almost distinct character degrees

783

Finite groups with an automorphism of prime order whose centralizer has small rank

784

Finite groups with consecutive nonlinear character degrees

785

FINITE GROUPS WITH FIVE NON-CENTRAL CONJUGACY CLASSES

786

Finite groups with graphs containing no triangles

787

Finite Groups With Many Conjugate Elements Original Research Article

788

Finite Groups With Many Conjugate Elements Original Research Article

789

Finite Groups with Nilpotent Subgroups of Even Order

790

Finite groups with real-valued irreducible characters of prime degree

791

Finite groups with seminormal or abnormal Sylow subgroups

792

Finite Groups with Small Sums of Degrees of Some Non-linear Irreducible Characters Original Research Article

793

Finite Groups with Small Sums of Degrees of Some Non-linear Irreducible Characters Original Research Article

794

Finite groups with some C-normal minimal subgroups

795

Finite groups with some m-permutable primary subgroups

796

FINITE GROUPS WITH SOME SS-EMBEDDED SUBGROUPS

797

Finite groups with some weakly s-supplementally embedded subgroups

798

Finite Groups with Specific Number of 2-Engelizers

799

FINITE GROUPS WITH THE SAME CONJUGACY CLASS SIZES AS A FINITE SIMPLE GROUP

800

Finite groups with three conjugacy class sizes of primary and biprimary elements

801

Finite groups with three relative commutativity degrees

802

Finite groups with X-quasipermutable subgroups of prime power order

803

Finite Groups, Spherical 2-Categories, and 4-Manifold Invariants

804

Finite Heisenberg groups and Seiberg dualities in quiver gauge theories Original Research Article

805

Finite Heisenberg groups from non-Abelian orbifold quiver gauge theories Original Research Article

806

Finite Heisenberg groups in quiver gauge theories Original Research Article

807

Finite high-order games and an inductive approach towards Gowersʹs dichotomy Original Research Article

808

Finite homogeneous and lattice ordered effect algebras Original Research Article

809

Finite homogeneous electric fields in the projector augmented wave formalism: Applications to linear and nonlinear response

810

Finite homomorphisms on rings of continuous functions

811

Finite Homotopy Bases of One-Relator Monoids

812

Finite Hopf algebras in braided tensor categories Original Research Article

813

Finite Hopf-Galois Coextensions, Crossed Coproducts, and Duality Original Research Article

814

Finite Hopf-Galois Coextensions, Crossed Coproducts, and Duality Original Research Article

815

Finite Horizon Bargaining and the Consistent Field,

816

FINITE HORIZON ECONOMIC LOT AND DELIVERY SCHEDULING PROBLEM: FLEXIBLE FLOW LINES WITH UNRELATED PARALLEL MACHINES AND SEQUENCE DEPENDENT SETUPS

817

Finite horizon H filter and its 2N algorithm

818

Finite horizon H∞ state-feedback control of continuous-time systems with state delays

819

Finite horizon planning for a production system with permitted shortage and fixed-interval deliveries

820

Finite horizon quadratic optimal control and a separation principle for Markovian jump linear systems

821

Finite horizon robust model predictive control with terminal cost constraints

822

Finite horizon semi-Markov decision processes with application to maintenance systems

823

Finite horizons, human wealth, and the risk-free rate puzzle

824

Finite Horizons, Political Economy, and Growth

825

Finite Hurwitz braid group actions on sequences of Euclidean reflections

826

Finite hyperelastic–plastic constitutive equations for atomistic simulation of dynamic ductile fracture

827

Finite Identification of Functions by Teams with Success Ratio and Above

828

Finite image-affine linear spaces Original Research Article

829

Finite image-gradings of simple associative algebras

830

Finite imprimitive linear groups of prime degree

831

Finite index and finite codimension Original Research Article

832

Finite index supergroups and subgroups of torsionfree abelian groups of rank two

833

Finite -induced gain and -contractivity of discrete-time switching systems including modal nonlinearities and actuator saturations

834

Finite Induced Graph Ramsey Theory: On Partitions of Subgraphs

835

Finite inflation of a hyperelastic toroidal membrane over a cylindrical rim

836

Finite inflation of an initially stretched hyperelastic circular membrane

837

Finite information logic

838

Finite Inhomogeneous Radial Expansion (Contraction) and Longitudinal Shearing of an Isotropic Compressible Elastic Circular Cylindrical Shell

839

Finite Inhomogeneous Shearing Deformations of a Transversely Isotropic Incompressible Material

840

Finite input/output representative of a class of Volterra polynomial systems

841

Finite Integral Transform Based Solution of Second Grade Fluid Flow between Two Parallel Plates

842

Finite integral transform method to solve asymmetric heat conduction in a multilayer annulus with time-dependent boundary conditions

843

Finite integration method for nonlocal elastic bar under static and dynamic loads

844

Finite integration method with RBFs for solving time-fractional convection-diffusion equation with variable coefficients

845

Finite Interpolation with Minimum Uniform Norm in Cn

846

Finite intervals in the partial orders of zero-dimensional, Tychonoff and regular topologies

847

Finite invariant sets in infinite graphs Original Research Article

848

Finite Irreducible Imprimitive Nonmonomial Complex Linear Groups of Degree 4

849

‎Finite iterative methods for solving systems of linear matrix equations over ref{}lexive and anti-ref{}lexive matrices‎

850

Finite iterative solutions to a class of complex matrix equations with conjugate and transpose of the unknowns

851

Finite jet determination of CR mappings

852

Finite k-Projective Dimension and Generalized Auslander-Buchsbaum Inequality and Intersection Theorem

853

Finite Laguerre Near-planes of Odd Order Admitting Desarguesian Derivations

854

Finite Laguerre planes of order 8 are ovoidal

855

FINITE LATTICE IMPLICATION ALGEBRAS

856

Finite Lattices and Lexicographic Grِbner Bases

857

FINITE LATTICES OF PRERADICALS an‎d FINITE REPRESENTATION TYPE RINGS

858

Finite layer method in analyses of piezoelectric composite laminates Original Research Article

859

Finite left distributive algebras with one generator Original Research Article

860

Finite Left-Distributive Algebras and Embedding Algebras

861

Finite Length and Pure-Injective Modules over a Ring of Differential Operators

862

Finite length effects in DNA-wrapped carbon nanotubes

863

Finite L-fuzzy machines

864

Finite linear groups, lattices, and products of elliptic curves

865

Finite Linear Qualitative Probability

866

Finite linear spaces admitting a projective group PSU(3,q) with q even

867

Finite linear spaces admitting a Ree simple group

868

Finite linear spaces admitting a two-dimensional projective linear group

869

Finite linear spaces with b−v∈{M,M+1} Original Research Article

870

Finite line-source model for borehole heat exchangers: effect of vertical temperature variations

871

Finite locally-quasiprimitive graphs Original Research Article

872

Finite loops with dihedral inner mapping groups are solvable

873

Finite market size as a source of extreme wealth inequality and market instability

874

Finite Matrix Groups over Nilpotent Group Rings Original Research Article

875

Finite Matrix Groups over Nilpotent Group Rings Original Research Article

876

Finite matrix topologies

877

Finite maturity caps and floors on continuous flows

878

Finite memory and imperfect monitoring

879

Finite memory non-linear model of a S/H-ADC device

880

Finite memory non-linear model of a S/H-ADC device

881

Finite Memory Observers for linear time-varying systems. Part II: Observer and residual sensitivity

882

Finite Memory Observers for linear time-varying systems: Theory and diagnosis applications

883

Finite methods in 1-order formalisms Original Research Article

884

Finite metric spaces of strictly negative type

885

Finite metrics in switching classes

886

Finite minimal non-T1-groups

887

Finite Mixture and Markov Switching Models by Sylvia Frühwirth-Schnatter

888

Finite mixture model analysis of microarray expression data on samples of uncertain biological type with application to reproductive efficiency

889

Finite mixture model analysis of microarray expression data on samples of uncertain biological type with application to reproductive efficiency

890

Finite mixture model applied in the analysis of a turbulent bistable flow on two parallel circular cylinders

891

Finite mixture of gamma distributions: A conjugate prior

892

Finite mixture regression model with random effects: application to neonatal hospital length of stay

893

Finite Mixture, Zero-inflated Poisson and Hurdle models with application to SIDS

894

Finite mixtures of multivariate Poisson distributions with application

895

Finite model order accuracy in Hammerstein model estimation

896

Finite modeling of parabolic equations using Galerkin methods and inverse matrix approximations

897

Finite models of sketches Original Research Article

898

Finite Modular Effect Algebras

899

Finite modular groups and lepton mixing Original Research Article

900

Finite momentum meson correlation functions in a QCD plasma Original Research Article

901

Finite Morse index solutions of an elliptic equation with supercritical exponent

902

Finite Morse index steady states of van der Waals force driven thin film equations

903

Finite motions from periodic frameworks with added symmetry

904

Finite multiplicative plasticity for small elastic strains with linear balance equations and grain boundary relaxation

905

Finite non-nilpotent groups with few non-normal non-cyclic subgroups

906

Finite Nonsolvable Groups in Which Only Two Nonlinear Irreducible Characters Have Equal Degrees Original Research Article

907

Finite Nonsolvable Groups in Which Only Two Nonlinear Irreducible Characters Have Equal Degrees Original Research Article

908

Finite non-solvable groups with few 2-parts of co-degrees of irreducible characters

909

Finite normal mixture copulas for multivariate discrete data modeling

910

Finite notations for infinite terms Original Research Article

911

Finite nuclear charge density distributions in electronic structure calculations for atoms and molecules

912

Finite nuclear charge density distributions in electronic structure calculations for atoms and molecules

913

Finite number density corrections to leptogenesis Original Research Article

914

Finite Nyquist and Finite Inclusions Theorems for disjoint stability regions

915

Finite objects in a locos Original Research Article

916

Finite orbit modules for parabolic subgroups of exceptional groups

917

Finite orbits for rational functions

918

Finite order solutions of linear differential equations in the unit disc

919

Finite orthodox locally idempotent semigroups having no finite basis of biidentities

920

Finite parts of singular and hypersingular integrals with irregular boundary source points

921

Finite p-groups all of whose non-abelian proper subgroups are generated by two elements

922

Finite p-groups and centralizers of non-cyclic abelian subgroups

923

Finite p-groups in which each absolute central automorphism is elementary abelian

924

Finite p-groups of class 2 have noninner automorphisms of order p

925

Finite p-Groups up to Isoclinism, Which Have Only Two Conjugacy Lengths

926

Finite p-groups with few minimal nonabelian subgroups

927

FINITE p-GROUPS WITH FEW NON-LINEAR IRREDUCIBLE CHARACTER KERNELS

928

Finite pion width effects on the rho-meson Original Research Article

929

Finite planar emulators for and and Fellows’ Conjecture

930

Finite plane deformations of a three-phase circular inhomogeneity-matrix system

931

Finite Plate with Circular and Square Hole under Partial Loading

932

Finite point solver for the simulation of 2-D laminar incompressible unsteady flows Original Research Article

933

Finite polycrystalline elastoplasticity and damage: multiscale kinematics

934

Finite population cellular radio systems with directed retry

935

Finite population corrections for multivariate Bayes sampling

936

Finite Population Single Server Batch Service Queue with Compulsory Server Vacation

937

Finite populations choose an optimal language

938

Finite Posets and Ferrers Shapes

939

Finite Posets in Uspec R[X] Original Research Article

940

Finite Posets in Uspec R[X] Original Research Article

941

Finite preorders and Topological descent I

942

Finite preorders and topological descent II: étale descent

943

Finite Presentability of Bruck–Reilly Extensions of Groups

944

Finite presentation of fibre products of metabelian groups

945

Finite prime distance graphs and 2-odd graphs

946

Finite primitive distance-transitive graphs

947

Finite products are biproducts in a compact closed category

948

Finite projective planes admitting a projective linear group PSL (2, q)

949

Finite Projective Planes with Abelian Transitive Collineation Groups

950

Finite propagation for a pseudoparabolic equation: Two-phase non-equilibrium flows in porous media Original Research Article

951

Finite propagation speed for solutions of the wave equation on metric graphs

952

Finite pulse effects in self-amplified-spontaneous-emission

953

Finite quantum fluctuations about static field configurations

954

Finite Quantum Groups and Cartan Matrices

955

Finite Queries Do Not Have Effective Syntax

956

Finite radiative electroweak symmetry breaking from the bulk Original Research Article

957

Finite Radical Field Extensions and Crossed Homomorphisms Original Research Article

958

Finite ramp time correction method for non-linear viscoelastic material model

959

Finite range decomposition for families of gradient Gaussian measures

960

Finite range decompositions of positive-definite functions

961

Finite rank Hankel operators on the polydisk Original Research Article

962

Finite rank harmonic operator-valued functions

963

Finite rank sums of products of Toeplitz and Hankel operators

964

Finite rank Toeplitz operators: Some extensions of D. Luecking’s theorem

965

Finite rank Toeplitz products with harmonic symbols

966

Finite Rate Chemistry and NO Molefraction in Non-Premixed Turbulent Flames

967

Finite rate chemistry and presumed PDF models for premixed turbulent combustion

968

Finite reductions for dissipative systems and viscous fluid-dynamic models on T2

969

Finite representability of operators

970

Finite representation type and direct-sum cancellation

971

Finite resources—infinite demands

972

Finite Reynolds number effect on the rheology of a dilute suspension of neutrally buoyant circular particles in a Newtonian fluid

973

Finite rings and Wilson’s theorem

974

Finite rotation quadrilateral element for multi-layer beams

975

Finite rotations in dynamics of beams and implicit time-stepping schemes

976

Finite rotations in non-linear analysis of elastic shells

977

Finite sample and asymptotic methods in econometrics

978

Finite Sample Criteria for Autoregressive Model Order Selection

979

Finite sample criteria for autoregressive order selection

980

Finite sample distributions of statistics in change point analysis

981

Finite sample efficiency of OLS in linear regression models with long-memory disturbances

982

Finite sample identifiability of multiple constant modulus sources

983

Finite sample inference for quantile regression models

984

Finite sample moments results for the quasi-FIML estimator of the reduced form: The linear case

985

Finite sample multivariate structural change tests with application to energy demand models

986

Finite sample performance of deconvolving density estimators

987

Finite sample performance of density estimators from unequally spaced data

988

Finite sample power of Cliff–Ord-type tests for spatial disturbance correlation in linear regression

989

Finite sample properties of a QML estimator of stochastic volatility models with long memory

990

Finite sample properties of ARMA order selection

991

Finite sample properties of indirect nonparametric closed-loop identification

992

Finite sample properties of linear model identification

993

Finite sample properties of maximum likelihood estimator in spatial models

994

Finite Sample Properties of Quantile Interrupted Time Series Analysis: A Simulation Study

995

Finite sample properties of system identification methods

996

Finite sample properties of system identification of ARX models under mixing conditions

997

Finite sample properties of tests of the Epstein–Zin asset pricing model

998

Finite sample properties of the ARCH class of models with stochastic volatility

999

Finite sample properties of the QMLE for the Log-ACD model: Application to Australian stocks

1000

Finite Sample Size Effect on Minimum Variance Beamformers: Optimum Diagonal Loading Factor for Large Arrays.

بازگشت