ليست عنوان مقالات لاتين Influence of oxygen partial pressure on the wetting of SiC by a Co–Si alloy Influence of precipitation conditions (n-heptane or carbon dioxide gas) on the performance of asphaltene stabilizers

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of oxygen partial pressure on the wetting of SiC by a Co–Si alloy

2

Influence of oxygen partial pressure on transparency and conductivity of RF sputtered Al-doped ZnO thin films

3

Influence of oxygen plasma treatment on boron carbon nitride film composition

4

Influence of oxygen plasma treatment on properties of ZrO2 films prepared by e-beam evaporation techniques

5

Influence of oxygen postannealing on the magnetic and electrical properties of La0.67Ca0.33MnO3–δ epitaxial films

6

Influence of oxygen postannealing on the magnetic and electrical properties of La0.67Ca0.33MnO3–δ epitaxial films

7

Influence of oxygen post-treatment on laser-induced damage of antireflection coatings prepared by electron-beam evaporation and ion beam assisted deposition

8

Influence of oxygen pressure and substrate temperature on the properties of aluminum fluoride thin films

9

Influence of oxygen pressure on combustion synthesis of zinc ferrite powders

10

Influence of oxygen pressure on combustion synthesis of ZnFe2O4

11

Influence of oxygen pressure on elastic strain and excitonic transition energy of ZnO epilayers prepared by pulsed laser deposition

12

Influence of oxygen pressure on Nd:LuVO4 films grown by pulsed laser deposition

13

Influence of oxygen reduction and hydrogen evolution in the gold and silver direct electrodeposition process from thiourea solutions in a filter press type reactor

14

Influence of oxygen supply on heptadecane mineralization by Pseudomonas nautica

15

Influence of oxygen supply rates on performances of catalytic membrane reactors: Application to the oxidative coupling of methane

16

Influence of oxygen tension on CD133 phenotype in human glioma cell cultures

17

Influence of oxygen treatment on electric double-layer capacitance of activated carbon fabrics Original Research Article

18

Influence of oxygen vacancies on optical properties of anatase TiO2 thin films

19

Influence of Oxygen, Carbon Dioxide, and Degree of Cutting on the Respiration Rate of Rutabaga

20

Influence of oxygenated additives on the NOxOUT process efficiency☆

21

Influence of oxygenates on fine particle and regulated emissions from a diesel engine

22

Influence of oxygen-containing functional groups on active carbon adsorption of selected organic compounds

23

Influence of oxygen-containing surface groups on the activity and selectivity of carbon nanofiber-supported ruthenium catalysts in the hydrogenation of cinnamaldehyde

24

Influence of oxygen-enrichment air intake and bioethanol–gasoline blends on exhaust emissions and fuel consumption of gasoline engine

25

Influence of oxytetracycline and oxolinic acid on the immune response of rainbow trout (Oncorhynchus mykiss)

26

Influence of oxytocin on prostaglandin E, intracellular calcium, and cyclic adenosine monophosphate in human amnion–derived (WISH) cells

27

Influence of oyster culture practices and environmental conditions on the ecological status of intertidal mudflats in the Pertuis Charentais (SW France): A multi-index approach

28

Influence of ozonation on extractability of Pb and Zn from contaminated soils

29

Influence of ozonation on the in vitro mutagenic and toxic potential of secondary effluents

30

Influence of ozone and ethylenediurea (EDU) on growth and yield of bean (Phaseolus vulgaris L.) in open-top field chambers Original Research Article

31

Influence of ozone initiated processing on the toxicity of aerosol particles from small scale wood combustion

32

Influence of ozone pollution and climate variability on net primary productivity and carbon storage in Chinaʹs grassland ecosystems from 1961 to 2000

33

Influence of ozone precursors and PM10 on the variation of surface O3 over Kannur, India

34

Influence of ozone pre-treatment on sludge anaerobic digestion: Removal of pharmaceutical and personal care products Original Research Article

35

Influence of ozone treatment on change of structural–chemical parameters of coal vitrinites and their reactivity during the thermal liquefaction process

36

Influence of Ozone, Hydrogen Peroxide, or Salt on Microbial Profile, TBARS and Color of Channel Catfish Fillets

37

Influence of ozone, relative humidity, and flow rate on the deposition and oxidation of sulfur dioxide on yellow sand

38

Influence of P gettering thermal step on light-induced degradation in Cz Si

39

Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations

40

Influence of P/M process parameters on microstructure and hardness of Al-Al3Ni composites synthesized in-situ via reactive sintering

41

Influence of P/T conditions on the style of normal fault initiation and growth in limestones from the SE-Basin, France

42

Influence of P2O5 and Al2O3 content on the structure of erbium-doped borosilicate glasses and on their physical, thermal, optical and luminescence properties

43

Influence of P2O5 content on the structure of SiO2-Na2O-CaO-P2O5 bioglasses by 29Si and 31P MAS-NMR

44

Influence of P3HT concentration on morphological, optical and electrical properties of P3HT/PS and P3HT/PMMA binary blends

45

Influence of p53 (rs1625895) polymorphism in kidney transplant recipients

46

Influence of p53 and bcl-2 on chemosensitivity in benign and malignant prostatic cell lines

47

Influence of PA6 nanocomposite films on the stability of vacuum-aged beef loins during storage in modified atmospheres

48

Influence of Pacific Ocean multidecadal variability on the distributional properties of hydrological variables in north-central Chile

49

Influence of Pacific on Southern Indian Ocean Rossby Waves

50

Influence of package, type of apple juice and temperature on the production of patulin by Byssochlamys nivea and Byssochlamys fulva

51

Influence of packaging conditions on microbial and lipid oxidation in lamb meat

52

Influence of packaging conditions on the properties of gamma-irradiated UHMWPE following accelerated ageing and shelf ageing

53

Influence of packaging geometry and material properties on the oxidation kinetic of bottled virgin olive oil Original Research Article

54

Influence of packaging material on pomegranate juice colour and bioactive compounds, during storage

55

Influence of packaging on spoilage yeast population in minimally processed orange slices

56

Influence of packing density on performance of porous wick for LHP

57

Influence of Paclobutrazol on Vegetative Growth, Nutrient Content, Flowering and Yield of Mango (Mangifera indica L.) and Its Residual Dynamics

58

Influence of pad compliance on nonlinear dynamic characteristics of tilting pad journal bearings

59

Influence of pad span on fretting fatigue behaviour of AISI 304 stainless steel

60

Influence of pad–pivot friction on tilting pad journal bearing

61

Influence of pain and gender on impact loading during walking: A randomised trial

62

Influence of pain treatment by epidural fentanyl and bupivacaine on homing of opioid-containing leukocytes to surgical wounds

63

Influence of paints on drying and salt distribution processes in porous building materials

64

Influence of paleorelief on the Mid-Miocene climate variation in southeastern Washington, northeastern Oregon, and western Idaho, USA

65

Influence of palladium colloid synthesis procedures on catalytic activity in methoxycarbonylation reaction

66

Influence of palladium films on hydrogen gas entry into iron: a study by electrochemical impedance spectroscopy

67

Influence of palladium incorporation technique on n-butane hydroisomerization over HZSM-5/bentonite catalysts Original Research Article

68

Influence of palladium on gas-sensing performance of magnesium ferrite nanoparticles

69

Influence of palladium on hydrogenation and crystallization of Zr–Cu–Ni–Al glasses

70

Influence of palladium on hydrogenation and crystallization of Zr–Cu–Ni–Al glasses

71

Influence of palladium precursors on methanol synthesis from CO hydrogenation over Pd/CeO2 catalysts prepared by deposition–precipitation method Original Research Article

72

Influence of palladium precursors on oxidation of alumina-supported palladium

73

Influence of Palladium Precursors on Structural Properties and Phenol Hydrogenation Characteristics of Supported Palladium Catalysts

74

Influence of palladium(II) complexes on the cycloaddition of α-bromoalkyl ketenes to cyclopentadiene

75

Influence of palm fatty acid distillate on rumen degradability and protozoa population in buffaloes

76

Influence of palm oil biodiesel on the chemical and morphological characteristics of particulate matter emitted by a diesel engine

77

Influence of palm oil fuel ash as a modifier on bitumen to improve aging resistance

78

Influence of palm oil fuel ash on ultimate flexural and uniaxial tensile strength of green ultra-high performance fiber reinforced cementitious composites

79

Influence of palygorskite on the structure and thermal stability of collagen

80

Influence of PAMAM dendrimers on human red blood cells

81

Influence of panel/back thickness on impact damage behavior of alumina/aluminum armors

82

Influence of panel-reactive antibodies on posttransplant outcomes in lung transplant recipients

83

Influence of PANI Additions on Methanol Sensing Properties of ZnO Thin Films

84

Influence of pantograph suspension characteristics on the contact quality with the catenary for high speed trains

85

Influence of paper mill sludges on corn yields and N recovery

86

Influence of papermill sludge on growth of Medicago sativa, Festuca rubra and Agropyron trachycaulum in gold mine tailings: A greenhouse study

87

Influence of paraffin wax characteristics on the formulation of wax-based binders and their debinding from green molded parts using two comparative techniques

88

Influence of parameter mismatch on the convergence of the band structures by using the Fourier expansion method

89

Influence of parameter variations on the fatigue behavior of magnet insulation systems

90

Influence of parameters and kinetic study of nickel (II) and cadmium (III) metals on Dalbergia derived adsorbent

91

Influence of parameters detuning on induction motor NFO shaft-sensorless scheme

92

Influence of parameters of field-emission cathodoluminescence light sources on their technical properties

93

Influence of parameters of the HVOF thermal spray process on the properties of multicomponent white cast iron coatings

94

Influence of parameters on pyrolysis-GC/MS of lignin in the presence of tetramethylammonium hydroxide

95

Influence of Parameters the Wall on Reinforced Soil Segmental Walls

96

Influence of Parapets and Aspect Ratio on Live-Load Distribution

97

Influence of parasitic inductances on transient current sharing in parallel connected synchronous rectifiers and Schottky-barrier diodes

98

Influence of parasitism in controlling the health, reproduction and PAH body burden of petroleum seep mussels

99

Influence of Parasitized Adult Reproduction on Host–Parasitoid Dynamics: An Age-Structured Model

100

Influence of parasympathetic non-adrenergic, non-cholinergic mechanisms on [3H]thymidine uptake in rat parotid salivary glands in response to mastication following upon a liquid regimen

101

Influence of parent concrete on the properties of recycled aggregate concrete

102

Influence of parent material and grain size on carbonate coatings in gravelly soils, Palo Duro Wash, New Mexico

103

Influence of parent material and soil type on the root chemistry of forest species grown on acid soils

104

Influence of parent sediments on the concentration of heavy metals in urban and suburban soils in Turku, Finland

105

Influence of parental and socioeconomic factors on stunting in children under 5 years in Egypt

106

Influence of parental depressive symptoms on adopted toddler behaviors: An emerging developmental cascade of genetic and environmental effects

107

Influence of Parental Exposure to Risk Factors in the Occurrence of Oral Clefts

108

Influence of parenteral administration of chamomile (Matricaria recutita L.) extract on colostrallgG absorption in neonatal calves

109

Influence of parenteral fat emulsion Intralipos® and citric acid on blood viscosity and erythrocyte morphology in vitro

110

Influence of parenteral nutrition on postoperative recovery in an experimental model of peritonitis

111

INFLUENCE OF PARENTING STYLES ON ADOLESCENT DELINQUENCY IN DELTA CENTRAL SENATORIAL DISTRICT

112

Influence of Parents’ Jobs on Apprentices’ Work Values

113

Influence of parity and age on ambulatory monitored blood pressure during pregnancy

114

Influence of Parity and Lactation on Hip Fracture Risk

115

Influence of parity on follicular dynamics and resumption of ovarian cycle in postpartum dairy cows

116

Influence of parity-dependence in the nuclear level density on the prediction of astrophysical reaction rates Original Research Article

117

Influence of parotid-sparing radiotherapy on xerostomia in head and neck cancer patients

118

Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich

119

Influence of partial cutting on site microclimate, soil nitrogen dynamics, and microbial biomass in Douglas-fir stands in western Washington

120

Influence of partial matrix fluorination on morphology and performance of HPDLC transmission gratings

121

Influence of partial Mn-substitution on surface oxygen species of LaCoO3 catalysts

122

Influence of partial replacement of cerium-rich mischmetal (CeMM) by yttrium on the crystallization and mechanical properties of amorphous Mg80Ni10CeMM10 alloy

123

Influence of partial replacement of NaCl with KCl and CaCl2on microbiological evolution of dry fermented sausages Original Research Article

124

Influence of partial replacement of NaCl with KCl on profiles of volatile compounds in dry-cured bacon during processing

125

Influence of partial replacement of NaCl with KCl, CaCl2 and MgCl2 on lipolysis and lipid oxidation in dry-cured ham

126

Influence of partial slip and direction of traction on wear rate in wheel-rail contact

127

Influence of partial slip on the peristaltic flow in a porous medium

128

Influence of partial substitution of Mo for Cr on structure and hydrogen storage characteristics of non-stoichiometric Laves phase TiCrB0.9 alloy

129

Influence of partial substitution of Sc2O3 with Gd2O3 on the phase stability and thermal conductivity of Sc2O3-doped ZrO2

130

Influence of Partial Substitution of Wheat Flour with Banana (Musa paradisiaca var. Awak) Flour on the Physico – Chemical and Sensory Characteristics of Doughnuts

131

Influence of partially hydrolyzed polyacrylamide on the foam capability of α-Olefin Sulfonate surfactant

132

Influence of Participation in Agricultural Support Services on Income from Agriculture: Results from the Multiple Regression Model (A Case From Rural Northwest Pakistan)

133

Influence of particle additions on the foaming behaviour of AlSi11/TiH2 composites made by semi-solid processing

134

Influence of particle and gas radiation in oxy-fuel combustion

135

Influence of particle characteristics on the clearance of low toxicity dusts from lungs

136

Influence of particle concentration and temperature on thermal conductivity and viscosity of Al2O3/R141b nanorefrigerant

137

Influence of particle concentration on the electrorheological efficiency of polyaniline suspensions

138

Influence of particle content and porosity on the wear behaviour of cast in situ Al(Mn)–Al2O3(MnO2) composite

139

Influence of particle curvature on transition regime heat conduction from aerosolized nanoparticles

140

Influence of particle diameter and material properties on mixing of monodisperse spheres on a grate: Experiments and discrete element simulation

141

Influence of particle diameter distribution on protein recovery in the expanded bed adsorption process

142

Influence of particle diffusion on the survival function in the count method using a Millikan cell

143

Influence of particle dispersions on the high-temperature strength of ferritic alloys

144

Influence of particle dynamics on erosion test conditions within the centrifugal accelerator type erosion tester

145

Influence of particle fragmentation and non-sphericity on the determination of diffusive and kinetic fluidized bed biochar combustion data

146

Influence of particle grain size on the yield and composition of products from the pyrolysis of oil shales

147

Influence of particle impact conditions and temperature on erosion–oxidation of steels at elevated temperatures

148

Influence of particle in-flight characteristics on the microstructure of atmospheric plasma sprayed yttria stabilized ZrO2

149

Influence of Particle Mixing on Vertical Profiles of Chlorophyll a and Bacterial Biomass in Sediments of the German Bight, Oyster Ground and Dogger Bank (North Sea)

150

Influence of particle morphology on nanostructural feature and conducting property in Sm-doped CeO2 sintered body

151

Influence of particle properties on the viscosity of polymer–alumina composites

152

Influence of particle properties on the wall region in packed capillaries

153

Influence of Particle Refractive Index on the Lower Detection Limit of Light Scattering Aerosol Counters

154

Influence of particle rotation on the interaction between particle clusters and particle-induced turbulence

155

Influence of particle shape and aspect ratio on thermally activated viscoplastic (time-dependent) response of ceramic (zirconia)–metal (NiCoCrAlY) particulate composites

156

Influence of particle shape and aspect ratio on thermally activated viscoplastic (time-dependent) response of ceramic (zirconia)–metal (NiCoCrAlY) particulate composites

157

Influence of particle shape and internal thermal gradients of biomass particles on pulverised coal/biomass co-fired flames

158

Influence of particle shape and size on the wetting behavior of soft magnetic micropowders

159

Influence of particle shape on size distribution measurements by 3D and 2D image analyses and laser diffraction

160

Influence of particle shape on surface roughness: Dissimilar morphological structures formed by man-made and natural gravels

161

Influence of particle shape on the packing and on the segregation of spherocylinders via Monte Carlo simulations

162

Influence of particle size and aggregation state of alumina on the rheology of a ceramic paste with an organic binder of ethylene–vinyl acetate copolymer and stearic acid

163

Influence of particle size and application method on the efficacy of calcium cyanamide for control of clubroot of vegetable brassicas

164

Influence of particle size and bed thickness on the screening process

165

Influence of particle size and compaction pressure on the magnetic properties of iron-phenolic soft magnetic composites Original Research Article

166

Influence of particle size and concentration, flow rate and precipitation density of aerosol on amount of insecticide deposited on larvae of gypsy moth

167

Influence of particle size and contact angle on the flotation of chalcopyrite in a laboratory batch flotation cell

168

Influence of particle size and dissolution conditions on the degradation properties of polylactide-co-glycolide particles

169

Influence of particle size and kinetic parameters on tire pyrolysis

170

Influence of particle size and kinetic parameters on tire pyrolysis

171

Influence of particle size and matrix in “metal” anodes for Li-ion cells

172

Influence of particle size and mineral phase in the analysis of iron ore slurries by Laser-Induced Breakdown Spectroscopy

173

Influence of particle size and mineral phase in the analysis of iron ore slurries by Laser-Induced Breakdown Spectroscopy

174

Influence of particle size and moisture content on tendency to bridge in biofuels made from willow shoots

175

Influence of particle size and multi-enzyme supplementation of fibrous diets on total tract digestibility and performance of weaning (8–20 kg) and growing (20–40 kg) pigs

176

Influence of particle size and nature of Pd species on the hydrodechlorination of chloroaromatics: Studies on Pd/TiO2 catalysts in chlorobenzene conversion

177

Influence of particle size and packaging on storage dry matter losses for switchgrass

178

Influence of particle size and particle size distribution on membrane-adsorption hybrid systems Original Research Article

179

Influence of particle size and particle size distribution on MICA filled nylon 6 composite

180

Influence of particle size and pH on anaerobic degradation of cellulose by ruminal microbes

181

Influence of Particle Size and Pressure dro‎p in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent

182

Influence of Particle Size and Pressure Drop in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent

183

Influence of particle size and shape on the comminution of single particles in a rigidly mounted roll mill

184

Influence of particle size and shape on turbulent heat transfer characteristics and pressure losses in water-based nanofluids

185

Influence of particle size and specific surface area on the pozzolanic activity of residual rice husk ash

186

INFLUENCE OF PARTICLE SIZE AND VOLUME FRACTION ON DAMAGE AND FRACTURE IN Al–Al3 Ti COMPOSITES AND MICROMECHANICAL MODELLING USING THE GTN MODEL

187

Influence of particle size distribution of precursor oxides on the synthesis of cordierite by solid-state reaction

188

Influence of particle size distribution on insertion processes in composite electrodes. Potential step and EIS theory: Part I. Linear diffusion

189

Influence of particle size distribution on rheology and particle packing of silica-based suspensions

190

Influence of particle size distributions on yield stress and viscosity of cement–fly ash pastes

191

Influence of particle size in the effect of polyethylene on human osteoblastic cells

192

Influence of particle size of support on reforming activity and selectivity of activated carbon supported platinum catalyst in APR

193

Influence of particle size on bioprocess induced changes on technological functionality of wheat bran Original Research Article

194

INFLUENCE OF PARTICLE SIZE ON CORROSION RESISTANCE OF ELECTROLESS Ni-P-SiC COMPOSITE COATINGS

195

Influence of particle size on efficiency deposition of aerosol on larvae gypsy moth

196

Influence of particle size on hysteresis heating behavior of nickel particulate polymer films

197

Influence of particle size on lipid digestion and β-carotene bioaccessibility in emulsions and nanoemulsions

198

Influence of particle size on Magnetic behavior of nickel oxide nanoparticles

199

Influence of particle size on performance of a pilot-scale fixed-bed gasification system

200

Influence of particle size on protein extractability from soybean and okara Original Research Article

201

Influence of particle size on pyrolysis and gasification performance of municipal solid waste in a fixed bed reactor

202

Influence of particle size on the activity and stability in steam methane reforming of supported Rh nanoparticles

203

Influence of particle size on the analytical and chemical properties of two energy crops

204

Influence of particle size on the conductance of SnO2 thick films

205

Influence of particle size on the crystallization kinetics of amorphous felodipine powders

206

Influence of particle size on the crystallization kinetics of glasses produced from waste materials

207

Influence of particle size on the direct compression of ibuprofen and its binary mixtures

208

Influence of particle size on the early hydration of slag particle activated by Ca(OH)2 solution

209

Influence of particle size on the microstructure, hardness and corrosion resistance of electroless Ni–P–Al2O3 composite coatings

210

Influence of particle size on the photoactivity of Ti/TiO2 thin film electrodes, and enhanced photoelectrocatalytic degradation of indigo carmine dye

211

Influence of particle size on the pyrolysis of rapeseed (Brassica napus L.): fuel properties of bio-oil

212

Influence of particle size on the sintering behavior and high-power piezoelectric properties of PMnN–PZT ceramics

213

Influence of particle size on wear rate in compressive crushing

214

Influence of particle size ratio on densification behaviour of AISI H13/AISI M3:2 powder mixture

215

Influence of particle size, density, particle concentration on bend erosive wear in pneumatic conveyors

216

Influence of particle surface roughness on the behaviour of Janus particles at interfaces

217

Influence of particle temperature and velocity on the microstructure and mechanical behaviour of high velocity oxy-fuel (HVOF)-sprayed nanostructured titania coatings

218

Influence of particles alloying on the performances of Pt–Ru/CNT catalysts for selective hydrogenation

219

Influence of particles in Cu–Al2O3 system on fracture mechanism

220

Influence of particles in Cu–Al2O3 system on fracture mechanism

221

Influence of particles on the formation of bubbles from a submerged capillary

222

Influence of particles packing in granules on the particles orientation in compacts

223

Influence of particles size on thermal properties of aluminium powder Original Research Article

224

Influence of particle-scale properties on the charge transfer characteristics in semiconducting particulate packing: particle-based finite element analysis

225

Influence of particulate matter on the air quality situation in a mediterranean island

226

Influence of particulate reinforcements on 6061 materials in extrusion modeling

227

Influence of particulate reinforcements on 6061 materials in extrusion modeling

228

Influence of Pass Parameters on Retained Mandrel Rolling Process Original Research Article

229

Influence of passenger car auxiliaries on pollutant emission factors within the Artemis model

230

Influence of passive supplemental damping systems on structural and nonstructural seismic fragilities of a steel building

231

Influence of passive supplemental damping systems on structural and nonstructural seismic fragilities of a steel building

232

Influence of Passive Ultrasonic Irrigation on the Removal of Root Canal Filling Material in Straight Root Canals

233

Influence of passivity on the tribocorrosion of carbon steel in aqueous solutions

234

Influence of Past Mining on the Quality of Surface Waters at Funtana Raminosa (Sardinia)

235

Influence of paste composition and curing program used for the production of positive plates with PbSnCa grids on the performance of lead acid batteries

236

Influence of paste volume on shrinkage cracking and fracture properties of self-compacting concrete

237

Influence of pasteurization of milk and addition of starter cultures on protein breakdown in ovine cheeses manufactured with extracts from flowers of Cynara cardunculus

238

Influence of pasteurization, brining conditions and production environment on the microbiota of artisan Gouda-type cheeses Original Research Article

239

Influence of pasture and concentrates in the diet of grazing dairy cows on the fatty acid composition of milk

240

Influence of Pasture and Rainfed Agriculture Land Uses on Soil Loss in Dojag-Chay Subwatershed (Ardabil Province-NW Iran)

241

Influence of pasture management (nitrogen and lime addition and insecticide treatment) on soil organisms and pasture root system dynamics in the field

242

Influence of pasture or grain-based diets supplemented with vitamin E on antioxidant/oxidative balance of Argentine beef

243

Influence of pasture or grain-based diets supplemented with vitamin E on antioxidant/oxidative balance of Argentine beef

244

Influence of pasture rearing on the cecal bacterial microbiota in broiler chickens

245

Influence of patella alta on knee extensor mechanics

246

Influence of path length and slurry velocity on the removal of iron from kaolin using a high gradient magnetic separator

247

Influence of Pathogenic and Non-pathogenic Bacteria on Soybean Suspension Cells

248

Influence of patient age on acute and late clinical outcomes following Palmaz-Schatz coronary stent implantation

249

Influence of patient characteristics and renal function on factor Xa inhibition pharmacokinetics and pharmacodynamics after enoxaparin administration in non-ST-segment elevation acute coronary syndromes

250

Influence of Patient Characteristics in the Selection of Patients for Defibrillator Implantation (The AVID Registry)

251

Influence of patient factors and ablative technologies on outcomes of radiofrequency ablation of intra-atrial re-entrant tachycardia in patients with congenital heart disease

252

Influence of patient factors on age of restorations at failure and reasons for their placement and replacement

253

Influence of patient preference and primary care clinician proclivity for watchful waiting on receipt of depression treatment

254

Influence of patients’ emotional state on the recovery processes after a transient global amnesia

255

Influence of Patient-Specific Head Modeling on EEG Source Imaging

256

Influence of pattern of clinical presentation and of gluten-free diet on bone mass and metabolism in adult coeliac disease

257

Influence of Pattern of Missing Data on Performance of Imputation Methods: An Example from National Data on Drug Injection in Prisons

258

Influence of patterned electrode geometry on performance of co-planar, single-chamber, solid oxide fuel cell

259

Influence of patterning on the nucleation of Ge islands on Si and SiO2 surfaces

260

Influence of pavement macrotexture on PM10 emissions from paved roads: A controlled study

261

Influence of Payor on Use of Invasive Cardiac Procedures and Patient Outcome After Myocardial Infarction in the United States

262

Influence of Pb and Co-doping on photocatalytic degradation performance of Zno thin films

263

Influence of Pb segregation on the deformation of nanocrystalline Al: Insights from molecular simulations Original Research Article

264

Influence of Pb2+ ions in the H2 oxidation on Pt catalyzed hydrogen diffusion anodes in sulfuric acid: presence of oscillatory phenomena

265

Influence of PbBi environment on the low-cycle fatigue behavior of SNS target container materials

266

Influence of PbF2 concentration on spectroscopic properties of Eu3 + and Dy3 + ions in lead borate glasses

267

Influence of PbF2 concentration on thermal, structural and spectroscopic properties of Eu3+-doped lead phosphate glasses

268

Influence of PbO and TiO2 additives on the microstructure development and magneticproperties of Ni–Zn soft ferrites

269

Influence of PbO on microstructure and properties of a NiZn ferrite

270

Influence of Pb-rich phases of precursor powder on microstructural evolution in the silver-sheathed (Bi,Pb)2Sr2Ca2Cu3Ox superconducting tapes

271

Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells

272

Influence of PCL on mechanical properties and bioactivity of ZrO2-based hybrid coatings synthesized by sol–gel dip coating technique

273

Influence of PCL on the material properties of collagen based biocomposites and in vitro evaluation of drug release

274

Influence of Pd addition on the creep behavior of AZ61 magnesium alloy

275

Influence of Pd addition on the electrochemical performance of Mg–Ni–Ti–Al-based metal hydride for Ni–MH batteries

276

Influence of Pd admixtures on the magnetic properties and crystallization of amorphous Fe76Si9B15

277

Influence of Pd and Pt additives on the microstructural and electrical properties of SnO2-based sensors

278

Influence of Pd and Pt additives on the microstructural and electrical properties of SnO2-based sensors

279

Influence of Pd doping on morphology and LPG response of SnO2

280

Influence of Pd-loading on gas sensing characteristics of SnO2 thick films

281

Influence of PDMS chain length on proton conductivity in polysiloxane based membranes for HT-PEMFC application

282

Influence of P-doping on the morphologies and photoluminescence properties of LaVO4:Tb3+ nanostructures

283

Influence of pea and wheat growth on Pb, Cd, and Zn mobility and soil biological status in a polluted amended soil

284

Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zones

285

Influence of peak-broadening and interdetector volume error on size-exclusive chromatographic analysis with dual viscometric–concentration detection using the universal calibration method

286

Influence of Peaking Capacitors in Reducing Rise Times of High-Voltage Nanosecond Pulses

287

Influence of pearling process on phenolic and saponin content in quinoa (Chenopodium quinoa Willd)

288

Influence of Peat on Fenton Oxidation

289

Influence of pebble bed dimensions and filling factor on mechanical pebble bed properties

290

Influence of pebble mulch on soil erosion by wind and trapping capacity for windblown sediment

291

Influence of pebble size and cover on rainfall interception by gravel mulch

292

Influence of pectin and CMC on physical stability, turbidity loss rate, cloudiness and flavor release of orange beverage emulsion during storage

293

Influence of pectin and CMC on physical stability, turbidity loss rate, cloudiness and flavor release of orange beverage emulsion during storage

294

Influence of pectin modification on water binding properties

295

Influence of pectin properties and processing conditions on thermal pectin degradation

296

Influence of pectinase treatment on the physicochemical properties of potato flours

297

Influence of pediatric vaccines on amygdala growth and opioid ligand binding in rhesus macaque infants: A pilot study

298

Influence of pedological and climatic factors on nitrogen mineralization in soils treated with pig slurry compost

299

Influence of PEEK Coating on Hip Implant Stress Shielding: A Finite Element Analysis

300

Influence of peer review medical audit on pathophysiological interpretation of nerve conduction studies in polyneuropathies

301

influence of peers’ conformity and sensation seeking towards smoking behavior on adolescents

302

Influence of PEG molecular weight on morphology, structure and wettability of electroless deposited Cu–Ni–P films

303

Influence of Pellet Composition and Structure on Carbothermic Reduction of Silica

304

Influence of Pellet Composition and Structure on Carbothermic Reduction of Silica

305

Influence of pelletization process on the properties of fly ash aggregates

306

Influence of PEMFC gas flow configuration on performance and water distribution studied by SANS: Evidence of the effect of gravity

307

Influence of Pendant Arms Bearing Ligating Groups on the Structure of Bismuth Porphyrins: Implications for Labeling Immunoglobulins Used in Medical Applications

308

Influence of pendent alkyl chains on Heck and Sonogashira C–C coupling catalyzed with palladium(II) complexes of selenated Schiff bases having liquid crystalline properties

309

Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation

310

Influence of Pentakeep-V on the nutrient interaction and availability for tomato production

311

Influence of pentavalent dopant addition to polarization and bioactivity of hydroxyapatite

312

Influence of peptone, ammonia water and urea supplements on keratinolytic and associated non-keratinolytic fungi in sewage sludge

313

Influence of perceptual learning on standing posture balance: repeated training for hardness discrimination of foot sole

314

Influence of perchloric acid on the kinetics of immersion plating of copper onto aluminium

315

Influence of percutaneous transluminal coronary angioplasty on cardiac release of endothelin, neuropeptide Y and noradrenaline

316

Influence of percutaneous transluminal coronary rotational atherectomy with adjunctive percutaneous transluminal coronary angioplasty on coronary blood flow

317

Influence of perennial forages on subsoil organic carbon in a long-term rotation study in Uruguay

318

Influence of perfluorinated carboxylic acids on ion-pair reversed-phase high-performance liquid chromatographic separation of betacyanins and 17-decarboxy-betacyanins

319

Influence of perfluorinated compounds on model lipid membranes prepared using Langmuir and Langmuir–Schaefer techniques

320

Influence of perfluorinated surfactants on the electrochemical behaviour of a lead electrode in sulfuric acid solution

321

Influence of perfluorinated surfactants on the positive active-material of lead/acid batteries

322

Influence of perfusion and cyclic compression on proliferation and differentiation of bone marrow stromal cells in 3-dimensional culture

323

Influence of Perfusion Depth on Laser Doppler Flow Measurements with Large Source-Detector Spacing

324

Influence of periglacial cover beds on in situ-produced cosmogenic 10Be in soil sections

325

Influence of peri-implant bone quality on implant stability

326

Influence of Perinatal Factors on the Onset of Puberty in Boys and Girls Implications for Interpretation of Link with Risk of Long Term Diseases

327

Influence of Perinatal Factors on the Onset of Puberty in Boys and Girls Implications for Interpretation of Link with Risk of Long Term Diseases

328

Influence of perinatal genistein exposure on the development of MNU-induced mammary carcinoma in female Sprague–Dawley rats

329

Influence of periodic variations in water level on regional seismic activity around a large reservoir: Field data and laboratory model

330

Influence of periodically propagating impurity and accompanying time variation of impurity spread on excitation profile of doped quantum dots

331

Influence of periodicity of sinusoidal bottom boundary condition on natural convection in porous enclosure

332

Influence of perioestrous suprabasal progesterone levels on cycle length, oestrous behaviour and ovulation in heifers

333

Influence of perioperative factors on outcomes in children younger than 18 months after repair of tetralogy of Fallot

334

Influence of Perioperative Hemodynamics on Spinal Cord Ischemia in Thoracoabdominal Aortic Repair

335

Influence of Peritent ubmacular Fluid on Viual Outcome After ucceful cleral Buckle urgery for Macula-off Retinal Detachment Original Reearch Article

336

Influence of permanent magnetic field on wear performance of dry sliding contacts

337

Influence of permanent magnets on vibration characteristics of a partially covered sandwich cantilever beam

338

INFLUENCE OF PERMANENT TURBULENT AIR FLOW ON ACOUSTIC STREAMING

339

Influence of Permethrin and Cypermethrin on Behavior in the Mouse

340

Influence of permutizers of subgroups on the structure of finite groups

341

Influence of peroxide addition on the morphology and properties of polypropylene – multiwalled carbon nanotube nanocomposites

342

Influence of persistent canine distemper virus infection on expression of RECK, matrix-metalloproteinases and their inhibitors in a canine macrophage/monocytic tumour cell line (DH82)

343

Influence of personal mastery on organizational performance through organizational learning and innovation in large firms and SMEs

344

Influence of Personality Traits and Work Commitment on Job Performance of Public Secondary School Teachers in Oyo South Senatorial District

345

Influence of personality traits on satisfaction, perception of relational benefits, and loyalty in a personal service context

346

Influence of Peruvian flat-subduction dynamics on the evolution of western Amazonia

347

Influence of pervaporation process parameters on enzymatic catalyst deactivation Original Research Article

348

Influence of petrographic and mineral matter composition of coal particles on their combustion reactivity☆

349

Influence of petrographic parameters on geotechnical properties of tertiary sandstones from Taiwan

350

Influence of petrographical composition on coal flotability

351

Influence of PFA on cracking of concrete and cement paste after exposure to high temperatures

352

Influence of PGPR and AMF on antioxidant activity, lycopene and potassium contents in tomato

353

Influence of pH and added gums on the properties of konjac flour gels

354

Influence of pH and Biological Metabolism on Dissolved Phosphorus during Biological Treatment of Piggery Wastewater

355

Influence of pH and biopolymer ratio on sodium caseinate—guar gum interactions in aqueous solutions and in O/W emulsions

356

Influence of pH and biopolymer ratio on whey protein–pectin interactions in aqueous solutions and in O/W emulsions

357

Influence of pH and calcium on the growth, polysaccharide production and symbiotic association of Sinorhizobium meliloti SEMIA 116 with alfalfa roots

358

Influence of pH and carrageenan type on properties of β-lactoglobulin stabilized oil-in-water emulsions

359

Influence of pH and chloride anion on the photocatalytic degradation of organic compounds: Part I. Effect on the benzamide and para-hydroxybenzoic acid in TiO2 aqueous solution

360

Influence of pH and exchangeable cation on oxidation of methylphenols by a montmorillonite clay

361

Influence of pH and fluoride concentration on titanium passivating layer: stability of titanium dioxide

362

Influence of pH and ionic strength on removal processes of a sedimentary humic acid in a suspension of vermiculite

363

Influence of pH and ionic strength on the adsorption, leaching and activity of myoglobin immobilized onto ordered mesoporous silicates

364

Influence of pH and ionic strength on the deposition of silver nanoparticles on microfiltration membranes

365

Influence of pH and ionic strength on transmission of plasmid DNA through ultrafiltration membranes Original Research Article

366

Influence of pH and irradiation wavelength on the photochemical degradation of sulfonylureas

367

Influence of pH and metal/carbon ratios on soluble organic complexation of Fe(II), Fe(III) and Al(III) in soil solutions determined by diffusive gradients in thin films Original Research Article

368

Influence of pH and NaCl on monolaurin inactivation of Streptococcus iniae Original Research Article

369

Influence of pH and natural organic matter on zinc biosorption in a model lignocellulosic biofuel biorefinery effluent

370

Influence of pH and oxygen on copper corrosion in simulated uterine fluid

371

Influence of pH and oxygen-inhibited layer on fluoride release properties of fluoride sealant

372

Influence of pH and pectin type on properties and stability of sodium-caseinate stabilized oil-in-water emulsions

373

Influence of pH and pKa values on electrophoretic behaviour of quinolones in aqueous and hydro-organic media

374

Influence of pH and protein concentration on rheological properties of whey protein dispersions

375

Influence of ph and sodium chloride on the high pressure-induced gel formation of a whey protein concentrate

376

Influence of pH and solution composition on the sorption of glyphosate and prochloraz to a sandy loam soil

377

Influence of pH and soy protein isolate addition on the physicochemical properties of functional grape pectin confections

378

Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials

379

Influence of pH and temperature on growth and bacteriocin production by Leuconostoc mesenteroides L124 and Lactobacillus curvatus L442

380

Influence of pH and temperature on growth of Bacillus cereus in vegetable substrates

381

Influence of pH and temperature on microbial activity, substrate availability of soil-solution bacteria and leaching of dissolved organic carbon in a mor humus

382

Influence of pH and temperature on microbial activity, substrate availability of soil-solution bacteria and leaching of dissolved organic carbon in a mor humus

383

Influence of pH and temperature on soluble substrate generation with primary sludge fermentation

384

Influence of pH and temperature on the early stage of mica alteration

385

Influence of pH and temperature on the rheological properties of aqueous dispersions of starch–sodium palmitate complexes

386

Influence of pH and temperature variations on vapor phase action of an antifungal food packaging against five mold strains

387

Influence of pH and TOC concentration on Cu, Zn, Cd, and Al speciation in rivers

388

Influence of pH and xanthan gum addition on freeze-thaw stability of tapioca starch pastes

389

Influence of pH condition on colloidal suspension of exfoliated graphene oxide by electrostatic repulsion

390

Influence of pH conditions on metabolic regulations in serine alkaline protease production by Bacillus licheniformis

391

Influence of pH environment on polymer based dental material properties

392

Influence of pH in the recovery of lactoferrin from whey with ceramic membranes Original Research Article

393

Influence of pH of the H2SO4 solution on the phase composition of the PbO2 active mass and of the PbO2 anodic layer formed during cycling of lead electrodes

394

Influence of pH of the impregnation solution on the phosphorus promotion in W/Al2O3 hydrotreating catalysts Original Research Article

395

Influence of pH on bioactivity of cinnamon oil against Legionella pneumophila and its disinfection efficacy in hot springs

396

Influence of pH on Cd and Cu uptake, distribution and their effect on nitrate reductase activity in cucumber ( Cucumis sativus L.) seedling roots

397

Influence of pH on dendritic structure of strongly fluorescent persulfate-treated poly(amidoamine) dendrimer

398

Influence of pH on fermentative hydrogen production from sweet sorghum extract

399

Influence of pH on formation and properties of gellan gels

400

Influence of pH on gas phase controlled mass transfer in a membrane contactor for hydrogen sulphide absorption

401

Influence of pH on heat resistance of Bacillus licheniformis in buffer and homogenised foods

402

Influence of pH on heat resistance of spores of Bacillus coagulans in buffer and homogenized foods

403

Influence of pH on inactivation of aquatic microorganism with a gas–liquid pulsed electrical discharge

404

Influence of pH on linear viscoelasticity and droplet size distribution of highly concentrated O/W crayfish flour-based emulsions

405

Influence of pH on luminescence from water-soluble colloidal Mn-doped ZnSe quantum dots capped with different mercaptoacids

406

Influence of pH on microstructural and optical properties of electrosynthesized CdSe thin films Original Research Article

407

Influence of pH on mineral speciation in a bioreactor simulating acid mine drainage

408

Influence of pH on Morphology and Formation Mechanism of CeO2 Nanocrystalline

409

Influence of pH on noble metal catalysed alcohol oxidation: reaction kinetics and modelling

410

Influence of pH on particle size and sensing response of chemically synthesized chromium oxide nanoparticles to alcohols

411

Influence of pH on persulfate oxidation of TCE at ambient temperatures Original Research Article

412

Influence of pH on pesticide sorption by soil containing wheat residue-derived char

413

Influence of pH on poly-(N-methylpyrrole) electrochemically synthesized in aqueous solution: an infrared study

414

Influence of pH on production and consumption of NO by slurries of an agricultural soil under denitrifying conditions

415

Influence of pH on rheological properties of porcine myofibrillar protein during heat induced gelation

416

Influence of pH on rheological properties of porcine myofibrillar protein during heat induced gelation

417

Influence of pH on slow crack growth of dental porcelains

418

Influence of pH on spectral and photophysical properties of 9-methyl-5-deazaalloxazine and 10-ethyl-5-deaza-isoalloxazine

419

Influence of pH on structural morphology and magnetic properties of ordered phase cobalt doped lithium ferrites nanoparticles synthesized by sol–gel method

420

Influence of pH on structure and photochromic behavior of nanocrystalline WO films

421

Influence of pH on the adsorption of lysozyme on a sulfonated membrane with and without poly(ethyleneimine) Original Research Article

422

Influence of pH on the adsorptive fouling of ultrafiltration membranes by fatty acid

423

Influence of pH on the aluminum speciation in freeze-dried poly(hydroxo aluminum) intercalated bentonites

424

Influence of pH on the behavior of lignosulfonate macromolecules in aqueous solution

425

Influence of pH on the cis–trans isomerization of Valine-Proline dipeptide: An integrated NMR and theoretical investigation

426

Influence of pH on the dry heat-induced denaturation/aggregation of whey proteins

427

Influence of pH on the electroactivity of polycarbazole

428

Influence of pH on the formulation of TiO2 nano-crystalline powders with high photocatalytic activity

429

Influence of pH on the hydrolysis of p-nitrophenyl maltodextrins by alpha-amylase 2 from malted barley

430

Influence of pH on the optical and structural properties of spin coated CeO2–TiO2 thin films prepared by sol–gel process

431

Influence of pH on the rejection of salts and ionic dyes by microfilters Original Research Article

432

Influence of pH on the sorption behaviour of uranyl ions in mesoporous MCM-41 and MCM-48 molecular sieves

433

Influence of pH on the stability of oil-in-water emulsions stabilized by a splittable surfactant

434

Influence of pH on the surface activity of humic acid: micelle-like aggregate formation and interfacial adsorption

435

Influence of pH on the Thermal Inactivation Kinetics of Horseradish Peroxidase in Aqueous Solution

436

Influence of pH on the toxicity of nitrophenols to Microtox® and Spirotox tests

437

Influence of pH on treatment of dairy wastewater by nanofiltration using shear-enhanced filtration system Original Research Article

438

Influence of pH on yeast immobilization on polystyrene surfaces modified by energetic ion bombardment

439

Influence of pH over nitrifying biofilm activity in submerged biofilters

440

Influence of pH upon in vitro sustained dye-release from oil-core nanocapsules with multilayer shells

441

Influence of pH value and locust bean gum concentration on the stability of sodium caseinate-stabilized emulsions

442

Influence of pH value and solvent utilized in the sol–gel synthesis on properties of derived ZrO2 powders

443

Influence of Ph Value and Temperature on the Formation of Iron Maltodextrin Complex

444

Influence of pH value on properties of nanocrystalline BaTiO3 powder

445

Influence of pH value on the quality of sol–gel derived ZnO films

446

Influence of pH value on the structure and electronic property of the passive film on 316L SS in the simulated cathodic environment of proton exchange membrane fuel cell (PEMFC)

447

Influence of pH values and aging time on the tribological behaviour of posterior restorative materials

448

Influence of pH values on preparation of hydroxyapatite/gelatin composites

449

Influence of pH values on the self-assembly in three trinuclear nickel complexes with bridging ligand N-salicylyl 4-phenyl-thiosemicarbazide

450

Influence of pH*-value of methanolic electrolytes on electroosmotic flow in hydrophilic coated capillaries

451

Influence of pH, Ca concentration, temperature and amidation on the gelation of low methoxyl pectin

452

Influence of pH, current and copper on the biological dechlorination of2,6-dichlorophenol in an electrochemical cell

453

Influence of pH, high salinity and particle concentration on stability and rheological properties of aqueous suspensions of fumed silica

454

Influence of pH, ionic strength and humic acid on adsorption of Cd(II) and Pb(II) onto vermiculite

455

Influence of pH, metal chelator, free radical scavenger and interfacial characteristics on the oxidative stability of β-carotene in conjugated whey protein–pectin stabilised emulsion

456

Influence of pH, salinity, and selenium on the growth of Aeromonas veronii in evaporation agricultural drainage water

457

Influence of pH, salt, and temperature on pressure inactivation of hepatitis A virus

458

Influence of pH, soil humic/fulvic acid, ionic strength and foreign ions on sorption of thorium(IV) onto γ-Al2O3

459

Influence of pH, temperature and volatile fatty acids on hydrogen production by acidogenic fermentation

460

Influence of pH, temperature, salinity, and dissolved organic matter on the photolysis of 2,4-dinitrotoluene and 2,6-dinitrotoluene in seawater

461

Influence of pH, type of acid and recovery media on the thermal inactivation of Listeria innocua

462

Influence of pH, water activity and acetic acid concentration on Listeria monocytogenes at 7 °C: Data collection for the development of a growth/no growth model

463

Influence of pharmaceutical residues on the structure of activated sludge bacterial communities in wastewater treatment bioreactors

464

Influence of phase angle between axial and torsional loadings on fatigue fractures of bone

465

Influence of phase composition and particle size of atomised Ni–Al alloy samples on the catalytic performance of Raney-type nickel catalysts Original Research Article

466

Influence of phase crystallization on the structure of rolled anistropic electrical-engineering steel.

467

Influence of phase miscibility and morphology on crack resistance behaviour and kinetics of crack propagation of nanostructured binary styrene–(styrene/butadiene)–styrene triblock copolymer blends Original Research Article

468

Influence of phase morphology and crystalline structure on the toughness of rubber-toughened isotatic polypropylene blends

469

Influence of phase segregation on the bulk and grain boundary conductivity of LSGM electrolytes

470

Influence of phase segregation on the mechanical properties of binary blends of polyethylenes that differ considerably in molecular weight

471

Influence of phase separation on the devitrification of 45S5 bioglass

472

Influence of phase separation, leachate recycle and aeration on treatment of municipal solid waste in simulated landfill cells

473

Influence of phase shift and strain path on the thermomechanical fatigue behavior of CMSX-4 specimens

474

Influence of phase transformations on lateral heterogeneity and dynamics in Earthʹs mantle

475

Influence of phase transformations on the mechanical properties of austenitic stainless steels

476

Influence of phase transition on pattern formation during catalytic reactions

477

Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

478

Influence of phase type and solute structure on changes in retention with pressure in reversed-phase high performance liquid chromatography

479

Influence of phase volume fractions on the processing of a Ti–6Al–4V alloy by high-pressure torsion

480

Influence of Phase-Shifting Transformers (PSTs) on the Distance Protection of Transmission Lines and Improve the Performance of Distance Relay

481

Influence of pH-dependent sorption and transformation on simulated pesticide leaching Original Research Article

482

Influence of phenol on glucose degradation during supercritical water gasification

483

Influence of phenolic compounds from wines on the growth of Listeria monocytogenes

484

Influence of phenolic compounds on the sensorial perception and volatility of red wine esters in model solution: An insight at the molecular level

485

Influence of phenolic group content in lignin expanders on the performance of negative lead–acid battery plates

486

Influence of phenolics in finger millet on grain and malt fungal load, and malt quality

487

Influence of phenoxy-terminated short-chain pendant groups on gas transport properties of cross-linked poly(ethylene oxide) copolymers

488

Influence of phenyl ring substituents in the cyclometallation of Schiff base ligands: crystal and molecular structures of [Pd-{3,4-(OCH2O)C6H2C(H)N(Cy)-C2,N}(μ-O2CMe)]2 and [Pd-{3,4-(OCH2CH2O)C6H2C(H)N(Cy)-C6,N}(μ-O2CMe)]2

489

Influence of phenyl-trisilanol polyhedral silsesquioxane on properties of epoxy network glasses

490

Influence of pHiand Creatine Phosphate on α-Adrenoceptor-mediated Cardiac Hypertrophy

491

Influence of phonon confinement on the optically-detected electrophonon resonance line-width in cylindrical quantum wires

492

Influence of phonon dispersion and exciton spectrum on the energy spectrum of magnetopolarons in a quantum well

493

Influence of phonon-associated tunneling rate on transport through a single-molecule transistor

494

Influence of phonons on exciton transfer dynamics: comparison of the Redfield, Förster, and modified Redfield equations Original Research Article

495

Influence of phosphate addition on activity of Ag and Cu catalysts for partial oxidation of alcohols

496

Influence of phosphate concentration and reaction temperature when using the molybdenum blue method for determination of phosphate in water

497

Influence of phosphate on cadmium sorption by calcium carbonate

498

Influence of phosphate precursors on the structures of sodium aluminophosphate sols, gels and glasses

499

INFLUENCE OF PHOSPHATE SOLUBILIZING MICROORGANISMS ON SOIL PHOSPHORUS AVAILABLITY AND FABA BEAN YIELD UNDER CALCAREOUS SOIL CONDITIONS.

500

Influence of phosphate source on preparation of zinc phosphate white pigments

501

Influence of phosphated cross-linked high amylose on in vitro release of different drugs

502

Influence of phosphated cross-linked high amylose on in vitro release of different drugs

503

Influence of Phosphoenolpyruvate on the Dynamic Behaviour of Phosphofructokinase ofEscherichia coli

504

Influence of phosphoric acid on the grid alloys of positive plates in the lead acid battery system: A comparative study

505

Influence of phosphorous and boron on dynamic recrystallization and microstructures of hot-rolled interstitial free steel

506

Influence of phosphorus application on methane emission and production in flooded paddy soils

507

Influence of phosphorus application on methane emission and production in flooded paddy soils

508

Influence of phosphorus concentration and temperature on growth and phosphorus uptake by the microalga Scenedesmus obliquus

509

Influence of phosphorus fertilizer and silviculture treatments on leaf and soil nitrogen and phosphorus concentrations in a matureProsopis glandulosa(mesquite) stand

510

INFLUENCE OF PHOSPHORUS FERTILIZER ON GROWTH, FRUITING PARAMETERS AND FRUIT QUALITY OF PEACH TREES IRRIGATED BY ACIDIC WATER

511

Influence of phosphorus nutrition on growth and metabolism of Duo grass (Duo festulolium)

512

Influence of Phosphorus on Phytoplankton Diversity in a Shallow Eutrophic Reservoir

513

Influence of phosphorus on sulphur capture during co-firing of sewage sludge with wood or bark in a fluidised bed

514

Influence of phosphorus on the growth of Fe–Zn intermetallic compound in Zn/Fe diffusion couples

515

Influence of phosphorus precipitation on permeability and soluble microbial product concentration in a membrane bioreactor

516

Influence of photoactivation method on conversion, mechanical properties, degradation in ethanol and contraction stress of resin-based materials

517

Influence of Photobiomodulation Therapy on Altered Plantar Pressure Distribution and Ankle Biomechanics in Individuals With Diabetic Foot Syndrome

518

Influence of photocatalytic paint components on the photoactivity of P25 towards NO abatement

519

Influence of photochemistry on the marine biogeochemical cycle of dimethylsulphide in the northern North Sea

520

Influence of photocrosslinking on the retrogradation of wheat starch based films

521

Influence of photodeposited gold nanoparticles on the photocatalytic activity of titanate species in the reduction of CO2 to hydrocarbons

522

Influence of photodynamic effect on biological activity of PBR–PP complexes

523

Influence of photoelectric stimulation with different spectrum on sliding friction behaviors of locust Oedaleus infernalis Saussure (Orthoptera: Acrididae) on slippery plates

524

Influence of photoelectron diffraction effects on the dichroism and spin polarization of non-magnetic surfaces

525

Influence of photo-induced degradation on the optoelectronic properties of regioregular poly(3-hexylthiophene)

526

Influence of photo-induced superhydrophilicity of titanium dioxide nanoparticles on the anti-fouling performance of ultrafiltration membranes

527

Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites

528

Influence of photoirradation on reduction of hexavalent chromium by zero-valent iron in the presence of organic acids Original Research Article

529

Influence of photonic stop band effect on photoluminescence of Y2O3:Eu3+ inverse opal films

530

Influence of phototherapy treatment duration for seasonal affective disorder: Outcome at one vs. two weeks

531

Influence of Physical Activity on 24-Hour Measurements of Heart Rate Variability in Patients With Coronary Artery Disease

532

Influence of physical activity on lymphocyte subsets in adolescents from Madrid. The AFINOS Study

533

Influence of physical activity on students’ physical self-concept and satisfaction with life: Physical and non-physical education students’ perspective

534

Influence of physical activity-related joint stress on the risk of self-reported hip/knee osteoarthritis: a new method to quantify physical activity

535

Influence of physical ageing on the excessive heat capacity of hyperquenched silicate glass fibers

536

Influence of physical aging and side group on the free volume of epoxy resins probed by positron

537

Influence of physical aging on creep of rubber

538

Influence of physical and chemical environments on the decay rates of 7Be and 40K

539

Influence of physical and chemical factors on the distributional pattern of Cyanobacteria in Kumaon Region

540

Influence of Physical and Chemical Material Properties on Mining Soil Erosion Processes Around Mineral Salts Company in Mighan playa, Arak, Iran

541

Influence of physical and geometrical properties of granite and limestone aggregates on the durability of a C20/25 strength class concrete

542

Influence of Physical Disability on Pregnancy and Motherhood

543

Influence of physical fuel properties on the injection rate in a Diesel injector

544

Influence of physical interaction between organoclay and poly(ethylene-co-vinyl acetate) matrix and effect of clay content on rheological melt state

545

Influence of physical parameters on radiation protection and image quality in intra-oral radiology

546

Influence of physical parameters on radiation protection and image quality in intra-oral radiology

547

Influence of physical processes and freshwater discharge on the seasonality of phytoplankton regime in the Bay of Bengal

548

Influence of physical properties and chemical composition of sample on formation of aerosol particles generated by nanosecond laser ablation at 213 nm

549

Influence of physical properties and chemical composition of sample on formation of aerosol particles generated by nanosecond laser ablation at 213 nm

550

Influence of physical properties and operating parameters on hydrodynamics in Centrifugal Partition Chromatography

551

Influence of physical properties of activated carbons on characteristics of electric double-layer capacitors

552

Influence of physical properties on deformation characteristics of collapsible soils

553

Influence of Physical Raking and Biological Process in the Mud-water Exchange Dynamics of P in Fish Culture Ponds

554

Influence of physical structure and chemistry of diesel soot suspended in hexadecane on lubrication of steel-on-steel contact

555

INFLUENCE OF PHYSICAL-CHEMICAL CHARACTERISTICS OF NATURAL ORGANIC MATTER (NOM) ON COAGULATION PROPERTIES: AN ANALYSIS OF EIGHT NORWEGIAN WATER SOURCES

556

INFLUENCE OF PHYSICAL-CHEMICAL CHARACTERISTICS OF NATURAL ORGANIC MATTER (NOM) ON COAGULATION PROPERTIES: AN ANALYSIS OF EIGHT NORWEGIAN WATER SOURCES

557

Influence of physical–chemical interactions on the thermal stability and surface properties of poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) block copolymers

558

Influence of physician perceptions on putting knowledge into practice

559

Influence of physiciansʹ attitudes on under-notifying infectious diseases: a longitudinal study

560

Influence of physicochemical binder properties on agglomeration of wheat powder in couscous grain Original Research Article

561

Influence of physico-chemical changes on enzymatic digestibility of ionic liquid and AFEX pretreated corn stover

562

Influence of physicochemical conditions and technological treatments on the iron binding capacity of egg yolk phosvitin

563

Influence of physicochemical conditions on amino acid adsorption on inorganic membranes

564

Influence of physico-chemical control and of membrane composition on the coupled transport of copper(II) ions through bulk liquid membranes

565

Influence of physico-chemical properties of chitin and chitosan on complement activation

566

Influence of Physicochemical Properties of Starch on Crispness of Tempura Fried Batter.

567

Influence of physicochemical properties on dissolution of drugs in the gastrointestinal tract

568

Influence of physicochemical properties on dissolution of drugs in the gastrointestinal tract

569

Influence of physicochemical–electronic properties of transition metal ion doped polycrystalline titania on the photocatalytic degradation of Indigo Carmine and 4-nitrophenol under UV/solar light

570

Influence of physico-structural properties on the photocatalytic activity of sol-gel derived TiO2 thin films

571

Influence of physics parameterization schemes on the simulation of a tropical-like cyclone in the Mediterranean Sea

572

Influence of physiological and subjective arousal on food intake in humans

573

Influence of physiological effort of growth and chemical composition on antler bone mechanical properties

574

Influence of Physiological Factors on Thyroid Size Determined by Ultrasound

575

Influence of Physiotherapy Follow-up Programs on Quality of Life and Heart Rate Variability among Patients after MI and Angioplasty in Pakistan

576

Influence of physisorbed arsenic on RHEED intensity oscillations during low-temperature GaAs molecular beam epitaxy

577

Influence of Phytase on Tibia Bone Characteristics of Broiler Quail Fed on Corn-Soybean Meal Diets

578

Influence of phytic acid and its metal complexes on the activity of pectin degrading polygalacturonase

579

Influence of phytic acid concentration on coating properties obtained by MAO treatment on magnesium alloys

580

Influence of phytic acid concentration on performance of phytic acid conversion coatings on the AZ91D magnesium alloy

581

Influence of phytoparasitic nematodes on symbiotic N2 fixation in tropical herbaceous legume cover crops

582

Influence of Phytophthora capsici L. inoculation on disease severity, necrosis length, peroxidase and catalase activity, and phenolic content of resistant and susceptible pepper (Capsicum annuum L.) plants

583

Influence of phytoplankton pigment composition on remote sensing of cyanobacterial biomass

584

Influence of piezoelectric cable processing steps on PVDF beta phase content

585

Influence of pig rennet on proteolysis, organic acids content and microbiota of Pecorino di Farindola, a traditional Italian ewe’s raw milk cheese

586

Influence of Pigeon Manure Tea on some Physiological and Genetical Parameters of Sugar Beet

587

Influence of pigments on supermolecular structure of polypropylene fibres

588

Influence of pileup rejection on nuclear counting, viewed from the time-domain perspective

589

Influence of pileup rejection on nuclear counting, viewed from the time-domain perspective

590

Influence of pilot signal on directivity of self-phased arrays under conditions of multipath propagation

591

Influence of pin offset in PCB through-hole during wave soldering process: CFD modeling approach

592

Influence of pipe material and surfaces on sulfide related odor and corrosion in sewers

593

Influence of Pipeline Operating Pressure on Value Setting of Automatic Control Valves at Different Pressure Drop Rates

594

Influence of pitch and cross-sectional ratio of strip of sheet metal on incremental in-plane bending

595

Influence of pitch composition and surface properties of petroleum coke on their interaction during the preparation of carbon/carbon composites Original Research Article

596

Influence of pitch motion on level ice actions

597

Influence of pitting on the fatigue life of a turbine blade steel

598

Influence of PIV interrogation area on turbulent statistics up to 4th order moments in smooth and rough wall turbulent flows

599

Influence of place-based senses of distinctiveness, continuity, self-esteem and self-efficacy on residentsʹ attitudes toward tourism

600

Influence of placement techniques on Vickers and Knoop hardness of class II composite resin restorations

601

Influence of plane wave cut-off on structural and electronic properties in Sn-BEA and Ti-BEA zeolite water molecule interaction

602

Influence of planetary oblateness on Keplerian dynamics in magnetospheres and existence of invariant tori

603

Influence of plankton concentration on gametogenesis and spawning of the black lip pearl oyster Pinctada margaritifera in Ahe atoll lagoon (Tuamotu archipelago, French polynesia)

604

Influence of planned six-month follow-up angiography on late outcome after percutaneous coronary intervention : A randomized study

605

Influence of planning and design on soil compaction in construction sites

606

Influence of plant and bacterial myrosinase activity on the metabolic fate of glucosinolates in gnotobiotic rats

607

Influence of Plant Based Coagulant (Enzyme Extracts from Albizia and Sunflower Seeds) on Quality of Domiati Cheese.

608

Influence of plant carbon on the mineralisation of atrazine residues in soils

609

Influence of plant growth promoter bacteria and plant density on yield components and seed yield of ajowan (carum copticum)

610

Influence of plant growth promoting bacteria and Cr6+ on the growth of Indian mustard

611

Influence of plant growth promoting bacteria and its mutant on heavy metal toxicity in Brassica juncea grown in fly ash amended soil

612

Influence of plant growth promoting rhizobacteria on fruit yield, pomological characteristics and chemical contents in cucumber mosaic virus-infected tomato plants

613

Influence of plant growth regulators (BA, TDZ, 2-iP and NAA) on micropropagation of Aglaonema widuri

614

Influence of plant growth regulators (BA, TDZ, 2-iP and NAA) on micropropagation of Aglaonema widuri

615

Influence of Plant Growth Regulators and Media on In vitro Propagation of Sorbus aucuparia L.

616

Influence of Plant Growth Regulators and Media on In vitro Propagation of Sorbus aucuparia L.

617

Influence of Plant Growth Regulators on Callogenesis and on the Biomass of Cell Suspensions in Lily (Lilium ledebourii and Lilium Regal)

618

Influence of Plant Growth Regulators on Callus Induction, Silymarin Production and Antioxidant Activity in Milk Thistle (Silybum marianum L. Gaertn.) under Tissue Culture Medium

619

Influence of Plant Growth Regulators on Callus Induction, Silymarin Production and Antioxidant Activity in Silybum marianum L. Gaertn. by Tissue Culture

620

Influence of plant growth regulators on growth, morpho-physiological characters and yield of summer sesame ( Sesamum indicum L. cv. Rama) under moisture stress

621

Influence of Plant Growth Regulators on In Vitro Culture and Regeneration of Dracocephalumkotschyi

622

Influence of plant growth regulators, carbohydrate source and concentration on micropropagation and other physiological traits of grape (Vitis vinifera L. cv. Shahroudi) under in vitro conditions

623

Influence of plant growth stage and season on the release of root phenolics by mulberry as related to development of phytoremediation technology

624

Influence of plant morphology on root yield in Safed Musli (Chlorophytum borivilianum) to identify morphological marker traits

625

Influence of Plant Population Density on Growth and Yield of Stevia (Stevia Rebaudiana Bertoni L.)

626

Influence of plant roots on rhizosphere soil solution composition of long-term contaminated soils

627

Influence of plant secondary metabolites on in vitro oxidation of methyl ferulate with cell wall peroxidases from lupine apoplast

628

Influence of plant size and species on preference of Cyrtobagous salviniae adults from two populations

629

Influence of Plant Spacing and Number of Seedlings/hill on Yield, Its Components and Some Grain Quality Characters for Three Egyptian Rice Cultivars

630

Influence of Plant Species on Host Acceptance Behavior of the Biocontrol AgentZygogramma bicolorata(Col.: Chrysomelidae)

631

INFLUENCE OF PLANT TEXTURE ON THE FEEDING CAPACITY AND FECUNDITY OF THE PREDATORY MITE Phytoseiulus persimilis (A. - H.).

632

Influence of plant traits on production costs and profitability of strawberry in southeast Queensland

633

Influence of plant volatiles on feeding damage caused by the onion thrips Thrips tabaci

634

Influence of plantar morphology on the kinematics of walking in children

635

Influence of planting date and sulfur coating in seed coating solution (SCS) on cotton (Gossypium hirsutum L.) seeds: physiological traits

636

Influence of Planting Date and Weed Interference on Sweet Corn Growth and Development

637

Influence of Planting Date on Yield and Quality of Sugarcane under the Agro-Climatic Conditions of Mardan

638

INFLUENCE OF PLANTING DATE, PLANT AGE, DISTRIBUTION PATTERN AND CONTROL OF MAIZE LEAFMINER, Pseudonapomyza spicata MALL. (DIPTERA: AGROMYZIDAE) ON MAIZE PLANTS AT KAFR EL-SHEIKH REGION

639

Influence of Planting Dates and Nitrogen Fertilization on The Performance of Quinoa Genotypes under Toshka Conditions

640

Influence of planting density on growth and biomass productivity of Terminalia arjuna under sodic soil sites

641

INFLUENCE OF PLANTING DEPTH ON GROWTH, FLOWER PRODUCTION AND BULB YIELD OF THE COMMON HYACINTH AND THE LILY

642

Influence of Planting Patterns and Plant Density on the Performance of Maize Hybrids in the Eastern Mediterranean Conditions

643

Influence of planting patterns on fluoroquinolone residues in the soil of an intensive vegetable cultivation area in northern China Original Research Article

644

Influence of plants on the chemical extractability and biodegradability of 2,4-dichlorophenol in soil

645

Influence of plants on the methane emission from sediments

646

Influence of plants on the reduction of hexavalent chromium in wetland sediments

647

Influence of plaque composition on luminal gain after balloon angioplasty, directional atherectomy, and coronary stenting

648

Influence of plaque composition on mechanisms of percutaneous transluminal coronary balloon angioplasty assessed by ultrasound imaging

649

Influence of plaque-forming bacterium, Rhodobacteraceae sp. on the growth of Chlorella vulgaris

650

Influence of plasm lipoprotein(a) levels on coronary vasomotor response to acetylcholine

651

Influence of plasma and cold spray deposited Ti Layers on high-cycle fatigue properties of Ti6Al4V substrates

652

Influence of plasma and gas nitriding on fatigue resistance of plain carbon (Ck45) steel

653

Influence of plasma discharge on the structure of polytetrafluoroethylene film and step coverage on polymer substrate

654

Influence of plasma duty cycle during plasma polymerization in adhesive bonding

655

Influence of plasma heat flux on segmentation cracking and permeability of thin suspension plasma sprayed coatings

656

Influence of plasma ion-beam assistance on TiO2 and MgF2 thin films deposited by plasma ion-assisted deposition

657

Influence of plasma light scattered by in-flight particle on the measured temperature by high speed pyrometry

658

Influence of plasma lipid and LDL-subfraction profile on the interaction between low density lipoprotein with human arterial wall proteoglycans

659

Influence of plasma nitriding and PAPVD Cr1 − xNx coating on the cavitation erosion resistance of an AISI 1045 steel

660

Influence of plasma nitriding on fatigue strength and fracture of a B-Mn steel

661

Influence of plasma nitriding on fatigue strength and fracture of a B-Mn steel

662

Influence of plasma nitriding on fretting wear behaviour of Ti–6Al–4V

663

Influence of plasma nitriding on hydrogen environment embrittlement of 1.4301 austenitic stainless steel

664

Influence of plasma nitriding on plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel

665

Influence of plasma on formation of crystalline Fe2SiO4 grains

666

Influence of Plasma on the Supersonic Air-intake Buzz

667

Influence of plasma power and substrate temperature on structure of nanocrystalline germanium carbon thin films by VHF plasma CVD

668

Influence of plasma pressure gradient on melt layer macroscopic erosion of metal targets in disruption simulation experiments

669

Influence of plasma pressure on the growth characteristics and ferroelectric properties of sputter-deposited PZT thin films

670

Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. I: Four point bend test

671

Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. I: Four point bend test

672

Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. II: Acoustic emission response

673

Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. II: Acoustic emission response

674

Influence of plasma surface treatment on bond strength behaviour of an adhesively bonded aluminium-epoxy system

675

Influence of plasma treatment of carbon blacks on electrochemical activity of Pt/carbon blacks catalysts for DMFCs

676

Influence of plasma treatment time on plasma induced vapor phase grafting modification of PBO fiber surface

677

Influence of plasma-nitriding and surface roughness on the wear and corrosion resistance of thin films (PVD/PECVD)

678

Influence of plasmas on the structural characterization of polyester fibres determined by Hg-porosimetry

679

Influence of plasma–wall interactions on the behaviour of ELMs in JT-60U

680

Influence of plastic anisotropy on the limit load of highly under-matched scarf joints with a crack subject to tension

681

Influence of plastic deformation conditions on structure evolution in Nb–Ti microalloyed steel

682

Influence of Plastic Deformation of Particulates on Flexure Toughness of Brittle Matrix Composite

683

Influence of plastic deformation on occurrence of discontinuous precipitation

684

Influence of plastic deformation on the velocity and ultrasonic attenuation of copper single crystals

685

Influence of plastic electrical outlet boxes on sound insulation of gypsum board walls

686

Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil

687

Influence of plastic slip localization on grain boundary stress fields and microcrack nucleation

688

Influence of plastic strain on the hydrogen evolution reaction on nickel (100) single crystal surfaces to improve hydrogen embrittlement

689

Influence of Plastic Waste Fibers on the Strength of Lime-Rice Husk Ash Stabilized Clay Soil

690

Influence of plasticiser on the barrier, mechanical and grease resistance properties of alginate cast films

691

Influence of plasticity mismatch and porosity on mechanical behavior of nanoscale Ag/W multilayers

692

Influence of plasticity on interface toughness in a layered solid with residual stresses

693

Influence of plasticizers (DOP and CNSL) on mechanical and electrical properties of SBS/polyaniline blends

694

Influence of plasticizers and crosslinking on the properties of biodegradable films made from sodium caseinate

695

Influence of Plasticizers on Thermal and Mechanical Properties and Morphology of Soy-Based Bioplastics

696

Influence of plate material on the contact strength of Li4SiO4 pebbles in crush tests and evaluation of the contact strength in pebble–pebble contact

697

Influence of Plate Nose Heating on Boundary Layer Development

698

Influence of plate surface temperature on the wetted area and system performance for falling film liquid desiccant regeneration system

699

Influence of Plate Thickness on the Mechanical Properties of Welded Joints Subjected to Long-Term Postweld Heat Treatments

700

Influence of platelet aspect ratio and orientation on the storage and loss moduli of HDPE-mica composites

701

Influence of Platelet Count, Acetylsalicylic Acid, von Willebrand’s Disease, Coagulopathies, and Haematocrit on Results Obtained Using a Platelet Function Analyser in Dogs

702

Influence of plates on flow inside a recessed space generated by rejected heat

703

Influence of platform screen doors on energy consumption of the environment control system of a mass rapid transit system: case study of the Taipei MRT system

704

Influence of Plating Parameter and Surface Morphology on Mild Steel

705

Influence of platinum and barium precursors on the NSR behavior of Pt–Ba/Al2O3 monoliths for lean-burn engines

706

Influence of platinum and rhodium composition on the NOx storage and sulphur tolerance of a barium based NOx storage catalyst

707

Influence of platinum foil impurities on sintering of functional ceramics

708

Influence of platinum on the transformation of an ethylbenzene-o-xylene mixture on H-ZSM-5 Original Research Article

709

Influence of Pleurotomy on Pulmonary Function After Off-Pump Coronary Artery Bypass Grafting

710

Influence of Pleurotus ostreatus inoculation on wood degradation and fungal colonization

711

Influence of plug-in hybrid electric vehicle charging strategies on charging and battery degradation costs

712

Influence of plumage colour on prey response: does habitat alter heron crypsis to prey?

713

Influence of PMEA-coated bypass circuits on perioperative inflammatory response

714

Influence of p-method finite element parameters on predictions of crack front geometry

715

Influence of point defects in KTaO3 on low-temperature dielectric relaxation

716

Influence of point mutations near the active site on the catalytic properties of fungal arylacetonitrilases from Aspergillus niger and Neurospora crassa

717

Influence of point sources on trace metal contamination and distribution in a semi-enclosed industrial embayment: the Ferrol Ria (NW Spain)

718

Influence of Poissonʹs ratio variation on lateral spring constant of atomic force microscopy cantilevers

719

Influence of Poissonʹs ratio variation on lateral spring constant of atomic force microscopy cantilevers

720

Influence of polar support for the synthesis of large C-terminal peptide aldehyde: application to chemoselective ligation

721

Influence of polarity of medium on fluorescence characteristics of alkylaminobenzophenones

722

Influence of polarity of medium on formation of intermediates in photolysis of alkylaminobenzophenones in solutions

723

Influence of polarity of the medium in the saturation of the electronic properties for π-conjugated oligothiophenes

724

Influence of polarity on filling polymer molecules into carbon nanotubes

725

Influence of polarization field on the lasing properties of III-nitride quantum wells

726

INFLUENCE OF POLARIZATION MODE DISPERSION ON THE EFFECT OF CROSS-PHASE MODULATION IN INTENSITY MODULATION-DIRECT DETECTION WDM TRANSMISSION SYSTEM

727

Influence of polarization on properties of 0–3 cement-based PZT composites

728

Influence of pole length and stiffness on the energy conversion in pole-vaulting

729

Influence of poling and ageing on high-frequency dielectric and piezoelectric response of PVDF-type polymer foils

730

Influence of pollen addition on mead elaboration: Physicochemical and sensory characteristics

731

Influence of pollen quality on ovarian development in honeybee workers (Apis mellifera scutellata)

732

Influence of Pollen Source and Pollination Time on Fruit Set of Ferragness Self-Incompatibility Almond

733

Influence of pollutants on the allelopathic potential of Amaranthus spinosus L.

734

Influence of pollution history on the response of coastal bacterial and nanoeukaryote communities to crude oil and biostimulation assays

735

Influence of poly acrylic acid on the dispersion of calcite nano-particles

736

Influence of poly I:C on sickness behaviors, plasma cytokines, corticosterone and central monoamine activity: Moderation by social stressors

737

Influence of poly(aminoquinone) on corrosion inhibition of iron in acid media

738

Influence of poly(ethylene glycol) as pore-generator on morphology and performance of chitosan/poly(vinyl alcohol) membrane adsorbents

739

Influence of poly(ethylene glycol)-containing additives on the sliding wear of ultrahigh molecular weight polyethylene/polypropylene blend

740

Influence of poly(ethylene oxide) brushes on the rheological properties of MgO colloidal suspensions in water

741

Influence of poly(methacrylic acid) on aggregative stability and electrical surface properties of aqueous suspensions of titanium dioxide

742

Influence of poly(methyl methacrylate) impregnation ratio on the surface properties of fumed silica and on the glassy temperature of poly(methyl methacrylate) using inverse gas chromatographic analysis

743

Influence of poly3-octylthiophene (P3OT) film thickness and preparation method on photovoltaic performance of hybrid ITO/CdS/P3OT/Au solar cells

744

Influence of polyacrylic acid on rheology of SiC suspension and mechanical properties of densified SiC

745

Influence of polyamines on growth and formation of secondary metabolites in hairy root cultures of Beta vulgaris and Tagetes patula

746

Influence of polyaniline doping concentration in (Bi0.5Sb0.5)2S3 thin polycrystalline films on structural, electrical and optical properties

747

Influence of polyaniline intercalations on the conductivity and permselectivity of perfluorinated cation-exchange membranes

748

Influence of polyanion type and cationic counter ion on the SRNF performance of polyelectrolyte membranes

749

Influence of polybenzimidazole main chain structure on H2/CO2 separation at elevated temperatures

750

Influence of polydimethylsiloxane outer coating and packing material on analyte recovery in dual-phase headspace sorptive extraction

751

Influence of polydispersity of poly(lactic acid) on particle formation by rapid expansion of supercritical CO2 solutions

752

Influence of polydopamine deposition conditions on pure water flux and foulant adhesion resistance of reverse osmosis, ultrafiltration, and microfiltration membranes

753

Influence of polyelectrolyte characteristics on pressure-driven activated sludge dewatering

754

Influence of polyelectrolyte dispersant on slip preparation of nano-sized tetragonal polycrystals zirconia for aqueous-gel-tape-casting process

755

Influence of polyelectrolyte dispersants on the surface chemical properties of aluminum in aqueous suspension

756

Influence of polyelectrolyte multilayer adsorption on the temperature sensitivity of Tpoly( N-isopropylacrylamide) (PNiPAM) microgels

757

Influence of polyelectrolyte on dynamic surface properties of BSA solutions

758

Influence of polyether chain and synergetic effect of mixed resins with different functionality on adhesion properties of epoxy adhesives

759

Influence of polyether polyol on the hydration and engineering properties of calcium sulfoaluminate cement

760

Influence of Polyethylene Glycol (PEG) in CMC-NH4BR Based Polymer Electrolytes: Conductivity and Electrical Study

761

Influence of polyethylene glycol on in vitro gas production profiles and microbial protein synthesis of some shrub species

762

Influence of polyethylene glycol template on microstructure and electrochromic properties of tungsten oxide

763

Influence of polyethylene terephthalate on the carbonisation of bituminous coals and on the modification of their electric and dielectric properties

764

Influence of polyfunctional interactions between organic zwitter-ion eremomycin and carboxylic cation exchangers on forming concentration front

765

Influence of polyglactin-coating on functional and morphological parameters of polypropylene-mesh modifications for abdominal wall repair

766

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Conversion and free volume

767

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Pure gas permeability and selectivity

768

Influence of polymer addition on biogenic sulfuric acid attack of concrete

769

Influence of polymer additive on the performance of lead-acid battery negative plates

770

Influence of polymer bases on the synergistic effects obtained from mixtures of additives in the petroleum industry: Performance and residue formation

771

Influence of Polymer Blending on Crystalline Structure of Polyvinylidene Fluoride

772

Influence of polymer chain length and chains ends on polyelectrolyte solvate structure and melting point

773

Influence of polymer charge on the compressive yield stress of silica aggregated with adsorbed cationic polymers

774

Influence of polymer concentration and dyes on photovoltaic performance of dye-sensitized solar cell with P(VdF-HFP)-based gel polymer electrolyte

775

Influence of polymer content in Ca-deficient hydroxyapatite–polycaprolactone nanocomposites on the formation of microvessel-like structures

776

Influence of polymer functional group architecture on titania pigment dispersion

777

Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride

778

Influence of polymer interdiffusion and clay concentration on gas barrier of polyelectrolyte/clay nanobrick wall quadlayer assemblies

779

Influence of polymer I–polymer II compatibility on conductivity in low-dimensional polymer electrolyte blends

780

Influence of polymer matrix crystallinity on nanocomposite morphology and properties

781

Influence of polymer membrane porosity on C3A hepatoblastoma cell adhesive interaction and function

782

Influence of polymer modulus on the percolation threshold of latex-based composites

783

Influence of polymer molecular weight in osteoinductive composites for bone tissue regeneration

784

Influence of polymer molecular weight on the solid-state structure of PEG/monoolein mixtures

785

Influence of polymer molecular weight on the UV ablation of doped poly(methyl methacrylate)

786

Influence of polymer network parameters of tragacanth gum-based pH responsive hydrogels on drug delivery

787

Influence of polymer on cement hydration in SBR-modified cement pastes

788

Influence of polymer structure on thermal stability of composite membranes

789

Influence of polymer structure upon active-ingredient loading: a Monte Carlo simulation study for design of drug-delivery devices

790

Influence of polymer type on adhesion performance of a blended cement mortar

791

Influence of polymeric additives on morphology and performance of Y2O3:Eu phosphor synthesized by flame-assisted spray pyrolysis

792

Influence of polymeric additives on the mechanical properties of α-tricalcium phosphate cement

793

Influence of polymeric additives on the mechanical properties of α-tricalcium phosphate cement

794

Influence of polymeric binder on the stability and intercalation/de-intercalation behaviour of graphite electrodes in non-aqueous solvents

795

Influence of polymeric counter-ions on the Langmuir- and LB-film stability of amphiphilic 1,3,4-oxadiazoles

796

Influence of polymeric enteral nutrition supplemented with different doses of glutamine on gut permeability in critically ill patients

797

Influence of polymeric fluid additives in EHL rolling/sliding line contacts

798

Influence of polymeric non-ionic surfactants on the surface tension of styrene and on the styrene polymerization process

799

Influence of polymeric surfactants on pesticidal suspension concentrates: dispersing ability, milling efficiency and stabilization power

800

Influence of polymerization condition on the electrical conductivity and gas sensing properties of polyaniline

801

Influence of polymerization conditions on the hydrolytic degradation of poly( -lactide) polymerized in the presence of stannous octoate or zinc-metal

802

Influence of polymerization conditions on the molecular weight and polydispersity of polyepichlorohydrin

803

Influence of polymerization mode and C-factor on cohesive strength of dual-cured resin cements

804

Influence of polymerization on the cholesteric structure in ethyl-cyanoethyl cellulose/acrylic acid solutions

805

Influence of polymerization procedure on polymer topology and other structural properties in highly branched polymers obtained by A2 + B3 approach

806

Influence of polymerization temperature on NH3 response of PANI/TiO2 thin film gas sensor

807

Influence of polymerization temperature on the molecular recognition of imprinted polymers

808

Influence of polymerization time and depth of cure of resin composites determined by Vickers hardness

809

Influence of polymerization time on the properties of polypyrrole-poly[bis(phenoxyphosphazene)] composites electrogenerated at constant current density

810

Influence of polymer–metal interface on the photovoltaic properties and long-term stability of nc-TiO2-P3HT hybrid solar cells

811

Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars

812

Influence of polymorphism in DNA repair and defence genes on p53 mutations in bladder tumours

813

Influence of polymorphism on N-thiophosphorylated thiourea 4-Me2NC6H4NHC(S)NHP(S)(OiPr)2 crystal design

814

Influence of polymorphism Q3405E and mutation A3371V in the apolipoprotein B gene on LDL receptor binding Original Research Article

815

Influence of polymorphonuclear leukocytes and plasma on coronary vasomotion after ischemia

816

Influence of polymyxins on the structural dynamics of Escherichia coli lipid membranes

817

Influence of polyolefin fibers on the engineering properties of cement-based composites containing silica fume

818

Influence of polyols and bulking agents on flavour release from low-viscosity solutions

819

Influence of polyoxometallate on oxidation state of tin in Pt/Sn nanoparticles and its importance during electrocatalytic oxidation of ethanol – Combined electrochemical and XPS study

820

Influence of polyphenolic extracts from Enydra fluctuans on oxidative stress induced by acephate in rats

821

Influence of polyphenols on soil nitrogen mineralization through the formation of bound protein in tropical montane forests of Mount Kinabalu, Borneo

822

Influence of polyphenols on soil nitrogen mineralization through the formation of bound protein in tropical montane forests of Mount Kinabalu, Borneo

823

Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete

824

INFLUENCE OF POLYPROPYLENE FIBERS ON THE PERFORMANCE OF NANO-SIO2-INCORPORATED MORTAR

825

Influence of Polypropylene Length on Stability and Flow of Fiber-reinforced Asphalt Mixtures

826

Influence of polypropylene membrane surface porosity on the performance of membrane distillation process

827

Influence of polysaccharide addition on stability of a cheese whey kefir-milk mixture

828

Influence of polysaccharide coating on the interactions of nanoparticles with biological systems

829

Influence of polysaccharides and storage during processing on the properties of mango seed kernel extract (microencapsulation)

830

Influence of Polysaccharides from Aloe vera (Aloe barbadensis Miller, Liliaceae) on Mechanically Induced Cough in Cats

831

Influence of polysaccharides on oxygen dependent lactate utilization by an amylolytic Lactobacillus plantarum strain

832

Influence of polysaccharides on the rheology and stabilization of α-pinene emulsions

833

Influence of polystyrene addition to cellulose on chemical structure and properties of bio-oil obtained during pyrolysis

834

Influence of polystyrene coating on the photo-degradation of amorphous silicon

835

Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes

836

Influence of polyvinyl alcohol on the synthesis of silica-pillared clay

837

Influence of polyvinyl pyrrolidone on the formation and properties of ZnO thin films in chemical bath deposition

838

Influence of popliteal vein thrombosis on subsequent ambulatory venous function measured by near-infrared spectroscopy

839

Influence of population and radius of cavity bubbles on size of sodium chloride crystals in ultrasound ablation

840

Influence of population and radius of cavity bubbles on size of sodium chloride crystals in ultrasound ablation

841

Influence of Porcine Spermadhesins on the Susceptibility of Boar Spermatozoa to High Dilution

842

Influence of Pore and Crystal Size of Crystalline Titanosilicates on Phenol Hydroxylation in Different Solvents

843

Influence of pore distribution on catalytic performance over inverse CeO2/Co3O4 catalysts for CH4/CO2 reforming

844

Influence of pore formers on physical properties and microstructures of supporting cathodes of solid oxide electrolysis cells

845

Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs

846

Influence of pore geometry, pressure and partial water saturation to electrical properties of reservoir rock: Measurement and model development

847

Influence of pore shape on the structure of a nanoconfined Gay–Berne liquid crystal

848

Influence of pore size distribution on methane storage at relatively low pressure: preparation of activated carbon with optimum pore size Original Research Article

849

Influence of pore size on penetration of surface modification into woven fabric treated with atmospheric pressure plasma jet

850

Influence of pore size on the separation of random and block copolymers by interactive liquid chromatography

851

Influence of pore structure and architecture of photo-grafted functional layers on separation performance of cellulose-based macroporous membrane adsorbers

852

Influence of pore structure and particle size on the rate determining step of lead (II) ion and nitrobenzene adsorption by activated carbons

853

Influence of pore structure and surface chemistry on electric double layer capacitance in non-aqueous electrolyte Original Research Article

854

Influence of pore structure on electric double-layer capacitance of template mesoporous carbons

855

Influence of pore structure on ion diffusion property in porous TiO2 coating and photovoltaic performance of dye-sensitized solar cells

856

Influence of pore water chemistry on the swelling behavior of compacted clays

857

Influence of pores on the surface microcompression mechanical response of thermal barrier coatings fabricated by atmospheric plasma spray—Finite element simulation

858

Influence of pores on the thermal insulation behavior of thermal barrier coatings prepared by atmospheric plasma spray

859

Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells

860

Influence of Pore-Volume Topology of Zeolite ITQ-7 in Alkylation and Isomerization of Aromatic Compounds

861

Influence of porewater exchange on nutrient dynamics in two New Zealand estuarine intertidal flats

862

Influence of Porosity and Elastic Modulus on Uniaxial Compressive Strength in Soft Brittle Porous Sandstones

863

Influence of porosity and fissuring on coking pressure generation

864

Influence of porosity and relative humidity on consolidation of dolostone with calcium hydroxide nanoparticles: Effectiveness assessment with non-destructive techniques

865

Influence of porosity and surface groups on the catalytic activity of carbon materials for the microwave-assisted CO2 reforming of CH4

866

Influence of porosity and total surface area on the oxidation resistance of C/C composites Original Research Article

867

Influence of porosity on cavitation instability predictions for elastic–plastic solids

868

Influence of porosity on cavitation instability predictions for elastic–plastic solids

869

Influence of porosity on charging speed of polypyrrole

870

Influence of porosity on compressive and tensile strength of cement mortar

871

Influence of porosity on dry sliding wear behavior in spray deposited Al–6Cu–Mn/SiCp composite

872

Influence of porosity on dry sliding wear behavior in spray deposited Al–6Cu–Mn/SiCp composite

873

Influence of porosity on fatigue resistance of cast SiC particulate-reinforced Al–Si alloy composite

874

Influence of porosity on fatigue resistance of cast SiC particulate-reinforced Al–Si alloy composite

875

Influence of porosity on mechanical behaviour and gas permeability of Ti compacts prepared by slip casting

876

Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants

877

Influence of porosity on PE molecular weight from the Phillips Cr/silica catalyst

878

Influence of porosity on quasi-static compressive properties of porous metal media fabricated by stainless steel fibers

879

Influence of porosity on the adsorption enthalpies of a non-ionic surfactant onto carbonaceous materials

880

Influence of porosity on the apparent interlaminar shear strength of pitch-based unidirectional C–C composites Original Research Article

881

Influence of porosity on the bulk and grain-boundary electrical properties of Gd-doped ceria

882

Influence of porosity on the critical currents of trifluoroacetate-MOD YBa/sub 2/Cu/sub 3/O/sub 7/ films

883

Influence of porosity on the electrical properties of La9.33(SiO4)6O2 oxyapatite

884

Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys

885

Influence of porosity on the mechanical properties of microporous β-TCP bioceramics by usual and instrumented Vickers microindentation

886

Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress

887

Influence of porosity on the non-linear deformation of granular materials

888

Influence of porosity on the stability of charge and piezoelectricity for porous polytetrafluoroethylene film electrets

889

Influence of porosity on the thermal behaviour of comet surfaces Original Research Article

890

Influence of porosity on Youngʹs modulus and Poissonʹs ratio in alumina ceramics

891

Influence of porous anodic alumina matrix upon europium luminescence from sol–gel-derived films

892

Influence of porous characteristics of the carbon support on alkali-modified trimetallic Co–Rh–Mo sulfided catalysts for higher alcohols synthesis from synthesis gas Original Research Article

893

Influence of porous composite microstructure on the processing and properties of solid oxide fuel cell anodes

894

Influence of porous medium and NAPL distribution heterogeneities on partitioning inter-well tracer tests: a laboratory investigation

895

Influence of porous morphology on optical dispersion properties of template free mesoporous titanium dioxide (TiO2) films

896

Influence of porous substrate on mesopore structure and water permeability of surfactant templated mesoporous silica membranes

897

Influence of Portevin–Le Chatelier effect on rupture mode of alloy 718 specimens

898

Influence of Portland cement composition on early age reactions with metakaolin

899

Influence of position and composition on adhesion to injection-molded TPO plaques as model automotive parts

900

Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools

901

Influence of positive active material type and grid alloy on corrosion layer structure and composition in the valve regulated lead/acid battery

902

Influence of Positive End-Expiratory Pressure Ventilation on Survival During Severe Hemorrhagic Shock

903

Influence of possible net transfer capacity expansion on Belgian–French and Belgian–German borders on electricity generation and related greenhouse gas emissions

904

Influence of post deposition annealing on crystallinity and dielectric properties of bismuth magnesium niobate thin films

905

Influence of post irradiation annealing on the mechanical properties and defect structure of AISI 304 steel

906

Influence of post-annealing condition on the properties of ZnO films

907

Influence of post-annealing conditions on properties of ZnO:Ag films

908

Influence of post-annealing on the properties of Sc-doped ZnO transparent conductive films deposited by radio-frequency sputtering

909

Influence of post-annealing on the structure and optical properties of ITO nanocrystals prepared by electrochemical method

910

Influence of post-annealing temperature on properties of ZnO:Li thin films

911

Influence of post-annealing treatment on the structure properties of ZnO films

912

Influence of post-buckling behaviour of composite stiffened panels on the damage criticality

913

Influence of post-deformation on CP-Ti processed by equal channel angular pressing

914

Influence of postdeposition annealing on structural properties and electrical characteristics of thin Tm2O3 and Tm2Ti2O7 dielectrics

915

Influence of postdeposition annealing on the properties of ZnO films prepared by RF magnetron sputtering

916

Influence of post-harvest technologies applied during cold storage of apples in Penicillium expansum growth and patulin accumulation: A review

917

Influence of Post-Peak Feed Withdrawal Rate on Egg Production by Broiler Breeders of Different Weights

918

Influence of post-pruning storage on stilbenoid levels in Vitis vinifera L. canes

919

Influence of post-sintering annealing on relaxor behaviour of (Pb0.75Ba0.25)(Zr0.70Ti0.30)O3 ceramics

920

Influence of post-thermal annealing on the properties of sprayed cadmium–zinc oxide thin films

921

Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys

922

Influence of post-treatment on the microstructural evolution of thermally sprayed Fe-base MMC containing TiC and Cr3C2

923

Influence of post-treatment temperature of TNTa photoelectrodes on photoelectrochemical properties and photocatalytic degradation of 4-nonylphenol

924

Influence of post-treatments on the contact resistance of plasma-sprayed La0.8Sr0.2MnO3 coating on SOFC metallic interconnector

925

Influence of posture and handgrip on the QT interval in left ventricular hypertrophy and in chronic heart failure

926

Influence of post-weld hot rolling on the microstructure and mechanical properties of AZ31 magnesium alloy sheet

927

Influence of potassium and micronutrients application on yield and micronutrients absorption of forage maize under drought stress situation

928

Influence of potassium chloride on moist CO oxidation under reducing conditions: Experimental and kinetic modeling study

929

Influence of potassium doping on the oxygen-ion diffusion and ionic conduction in the La2Mo2O9 oxide-ion conductors

930

Influence of potassium fertilization, water and salt stress, and their interference on rheological soil parameters in planted containers

931

Influence of Potassium Foliar Application on Cotton Yield (Gossypium barbadense L.) under Saline Condition

932

Influence of potassium hydroxide pretreatment on the extraction of gold and silver from a refractory ore

933

Influence of potassium loading at different reaction temperatures on the NOx reduction process by potassium-containing coal pellets☆

934

Influence of potassium on the competition between methane and ethane in steam reforming over Pt supported on yttrium-stabilized zirconia Original Research Article

935

Influence of potassium/oxygen layer on properties of iron surfaces Original Research Article

936

Influence of potential climate change on forest landscape dynamics of west-central Alberta

937

Influence of potential on the electrochemical behaviour of β titanium alloys in Hank’s solution

938

Influence of potential pulse conditions on the formation of honeycomb-like copper electrodes

939

Influence of potty training habits on dysfunctional bladder in children

940

Influence of Poultry Diet on the Fatty Acid, Mineral and Vitamin Composition of the Egg: a Review

941

Influence of poultry litter and rapeseed cake on infestation of Meloidogyne incognita on tomato in Dire Dawa, eastern Ethiopia

942

Influence of poultry manure and its biochar, Funneliformis mosseae and salinity stress on corn yield and micronutrients concentration

943

Influence of poultry manure application on the leaf amino acid profile, growth and yield of moringa (Moringa oleifera lam) plants plant

944

Influence of poultry manure on phosphorus availability and the standard phosphate requirement of crop estimated from quantity–intensity relationships in different soils

945

Influence of powder and paste on flow properties of SCC

946

Influence of powder characteristics of alumina in a glass-alumina mixed layer upon constrained sintering of the sandwich substrate with an inner-self-constraining layer

947

Influence of powder composition and manufacturing method on electrical and chromium barrier properties of atmospheric plasma sprayed spinel coatings prepared from MnCo2O4 and Mn2CoO4 + Co powders on Crofer 22 APU interconnectors

948

Influence of powder injection point position on efficiency of powder preheating in cold spray: Numerical study

949

Influence of powder morphology on properties of ceramic injection moulding feedstocks

950

Influence of powder morphology on thermoelectric anisotropy of spark-plasma-sintered Bi–Te-based thermoelectric materials Original Research Article

951

Influence of powder particle injection velocity on the microstructure of Al–12Si/SiCp coatings produced by laser cladding

952

Influence of powder particle size and scintillator layer thickness on the performance of Gd2O2S:Tb scintillators for neutron imaging

953

Influence of powder particle size and scintillator layer thickness on the performance of Gd2O2S:Tb scintillators for neutron imaging

954

Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks

955

Influence of powder pre-treatments and milling on dispersion ability of aqueous hydroxyapatite-based suspensions

956

Influence of powder pre-treatments on dispersion ability of aqueous silicon nitride-based suspensions

957

Influence of powder size on characteristics of air plasma sprayed silicon coatings

958

Influence of powder synthesis methods on microstructure and oxygen permeation performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite-type membranes

959

Influence of powder, chemistry and intergranular phases on the wear resistance of liquid-phase-sintered Al2O3

960

Influence of powder/liquid mixing ratio on the performance of a restorative glass-ionomer dental cement

961

Influence of powdered Moringa oleifera seeds and natural filter media on the characteristics of tapioca starch wastewater

962

Influence of power converter on induction motor acoustic noise: interaction between control strategy and mechanical structure

963

Influence of power density on the setting behaviour of light-cured glass-ionomer cements monitored by ultrasound measurements

964

Influence of power density on the setting behaviour of light-cured glass-ionomer cements monitored by ultrasound measurements

965

Influence of Power Law Distribution with Pressure on the Frequencies of Supported Functionally Graded Material Cylindrical Shell with C-SL and F-SS Boundary Conditions

966

Influence of power source type on energy effectiveness and environmental impact of cooling system with adsorption refrigerator

967

Influence of powerful laser irradiation on impurity-defect structure of CdTe detector material

968

Influence of powerful laser irradiation on impurity-defect structure of CdTe detector material

969

Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete

970

Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculations

971

Influence of PPCA (phosphinopolycarboxylic acid) and DETPMP (diethylenetriaminepentamethylenephosphonic acid) on silica fouling Original Research Article

972

Influence of Pr and Ce in dry methane reforming catalysts produced from La1−xAxNiO3−δ perovskites Original Research Article

973

Influence of Pr substitution on defects, transport, and grain boundary properties of acceptor-doped BaZrO3

974

Influence of Pr3+ substitution at Ba-site of Eu(Ba1−xPrx)2Cu3O7−δ ceramic rods with hot-spot on oxygen sensing properties

975

Influence of practical curing methods on evaporation of water from freshly placed concrete in hot climates

976

Influence of practice on response-selection and response-implementation processes involved in the response-interference effect

977

Influence of prairie dogs (Cynomys ludovicianus) on habitat heterogeneity and mammalian diversity in Mexico

978

Influence of praseodymium and nitrogen co-doping on the photocatalytic activity of TiO2

979

Influence of praseodymium oxide/cobalt oxide ratio on microstructure and electrical properties of zinc oxide varistor ceramics

980

Influence of pravastatin on lipoproteins, and on endothelial, platelet, and inflammatory markers in subjects with peripheral artery disease

981

Influence of Pr-doping on structural, electronic transport, magnetic properties of perovskite molybdates Sr1−xPrxMoO3 (0≤x≤0.15)

982

Influence of pre- and post-extrusion heat treatments on microstructure and anisotropy of mechanical properties in a Mg–Al–Zn alloy

983

Influence of pre- and post-harvest factors and processing on the levels of furocoumarins in grapefruits (Citrus paradisi Macfed.)

984

Influence of pre- and post-heat treatment of anode substrates on the properties of DC-sputtered YSZ electrolyte films

985

Influence of pre- and post-pubertal grazing regimes on adult testicular morphology in extensively reared Corriedale rams

986

Influence of preadsorbed oxygen on activated chemisorption of methane on Pd(110)

987

Influence of preannealing on the crystallization of Fe75Si15B10 metallic glass

988

Influence of preannealing on the crystallization of Fe75Si15B10 metallic glass

989

Influence of pre-annealing on the thermal stability of a nanocrystalline Hf-Ni alloy

990

Influence of pre-blanching on the water absorption kinetics of soybeans Original Research Article

991

Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs

992

Influence of precessing vortex core on flame flashback in swirling hydrogen flames

993

Influence of precipitate density on the nodular corrosion resistance of Zr–Sn–Fe–Cr alloys at 500°C

994

Influence of precipitate morphology on tensile creep of a single crystal nickel-base superalloy

995

Influence of precipitated calcium carbonate (CaCO3) on shiitake (Lentinula edodes) yield and mushroom size

996

Influence of precipitates on ductile fracture of aluminium alloy AA7075 at high strain rates

997

Influence of precipitates on ductile fracture of aluminium alloy AA7075 at high strain rates

998

Influence of precipitates on GaN epilayer quality

999

Influence of precipitation composition on the chemistry of streams draining from peat examined using Na:Ca:Mg ratio

1000

Influence of precipitation conditions (n-heptane or carbon dioxide gas) on the performance of asphaltene stabilizers

بازگشت