<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Preparation of nano-grained zirconia ceramics by low-temperature, low-pressure spark plasma sintering
2
Preparation of nano-gypsum from anhydrite nanoparticles: Strongly increased Vickers hardness and formation of calcium sulfate nano-needles
3
Preparation of Nanohybrid CuO-Fe3O4 /Zeolite Nanocomposite as Potential Adsorbent for Toxic As (V) and Pb(II) from Water Solution.
4
Preparation of nano-hydroxyapatite particles with different morphology and their response to highly malignant melanoma cells in vitro
5
Preparation of nano-hydroxyapatite/poly(L -lactide) biocomposite microspheres
6
Preparation of Nanohydroxyapatite-Carbon Nanotube Composite Coatings on 316L Stainless Steel Using Electrophoretic Deposition
7
Preparation of Nanoliposomes by Size Exclusion Chromatography to Entrap Soluble Antigens from Leishmania Donovani
8
Preparation of Nanoliposomes Incorporated Leishmania donovani Antigens
9
Preparation of nano-magnetic fluid using plasma technique and its application in safety valves
10
Preparation of Nano-Medicine to Eliminate Helicobacter pylori Infection
11
Preparation of nanometer AlN powders by combining spray pyrolysis with carbothermal reduction and nitridation
12
Preparation of nanometer crystalline TiO2 with high photo-catalytic activity by pyrolysis of titanyl organic compounds and photo-catalytic mechanism
13
Preparation of nanometer dispersed polypropylene/polystyrene interpenetrating network using supercritical CO2 as a swelling agent
14
Preparation of Nanometer La1-x SrxMnO3 and Application in Air-Cathode
15
Preparation of nanometer size TiC particulate reinforcements in Ti matrix composites under high pressure
16
Preparation of nanometer thin films with intense pulsed electron beam ablation
17
Preparation of nanometer-scale CeO2 particles via a complex thermo-decomposition method
18
Preparation of nanometer-scale rod array of hydroxyapatite crystal
19
Preparation of nanometer-size amorphous powders of arsenic by γ-irradiation at room temperature
20
Preparation of nanometer-size amorphous powders of arsenic by γ-irradiation at room temperature
21
Preparation of nanometer-sized barium titanate powders by a sol-precipitation process with surfactants
22
Preparation of nanometer-sized zinc sulfide particles by electrospray pyrolysis
23
Preparation of nano-needle hematite particles in solution
24
Preparation of nano-NiO particles and evaluation of their catalytic activity in pyrolyzing cellulose
25
Preparation of nanoparticles by the self-organization of polymers consisting of hydrophobic and hydrophilic segments: Potential applications
26
Preparation of nanoparticles composed with bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer
27
Preparation of nanoparticles from denatured whey protein by pH-cycling treatment
28
Preparation of Nanoparticles Loaded by Dimethyl Fumarate and Their Physical and Chemical Properties Study
29
Preparation of Nanoparticles of Barium Ferrite from Precipitation in Microemulsions
30
Preparation of Nanoparticles of LiCoO2 Using Laser Ablation in Liquids
31
Preparation of nanoparticles of polystyrene and polyaniline by γ-irradiation in lyotropic liquid crystal
32
Preparation of nanoparticles of silver halides, superconductors and magnetic materials using water-in-oil microemulsions as nano-reactors
33
Preparation of nanoparticles via spray route
34
Preparation of nanoparticles which contains histidine for immobilization of Trametes versicolor laccase
35
Preparation of nanoparticles with a continuous gas–liquid membrane contactor: Absorption process
36
Preparation of nanoparticles with a gas–liquid membrane contactor
37
Preparation of nanoparticles with a membrane contactor
38
Preparation of nanoparticles with a semi-batch gas–liquid membrane contactor
39
Preparation of nanoparticulate metal catalysts in porous supports using an ionic liquid route; hydrogenation and C–C coupling
40
Preparation of nanophase materials by thermal spray processing of liquid precursors
41
Preparation of nano-polyethylene fibers and floccules using MCM-41-supported metallocene catalytic system under atmospheric pressure
42
Preparation of nanoporous carbons by defluorination
43
Preparation of nanoporous carbons with hierarchical pore structure for CO2 capture
44
Preparation of nanoporous carbons with hierarchical pore structure for CO2 capture
45
Preparation of nanoporous composite carbon membrane for separation of rhodamine B dye
46
Preparation of Nanoporous Graphene via Nanoporous Zinc Oxide and its Application as a Nanoadsorbent for Benzene, Toluene and Xylenes Removal
47
Preparation of nanoporous poly(methyl silsesquioxane) films using core-shell silsesquioxane as porogen
48
Preparation of nanoporous silica using copolymer template
49
Preparation of nanoporous titania spherical nanoparticles
50
Preparation of nanoporous ZnO using copolymer gel template
51
Preparation of nano-Pt-modified electrode and its electrocatalytic activity investigation
52
Preparation of nano-pyrophyllite: Comparative study of sonication and grinding Original Research Article
53
Preparation of nanoscale MgFe2O4 via non-conventional mechanochemical route
54
Preparation of nanoscale thin-walled carbon tubules from a polyethylene precursor
55
Preparation of nano-scale titania thick film and its oxygen sensitivity
56
Preparation of nanoscale α-Al2O3 powder by the polyacrylamide gel method
57
Preparation of nanosensors based on organic functionalized MWCNT for H2S detection
58
Preparation of nanosheet by exfoliation of layered iron phenyl phosphate under ultrasonic irradiation
59
Preparation of nano-silica materials: The concept from wheat straw
60
Preparation of nano-silver iodide powders and their efficiency as ice-nucleating agent in weather modification
61
Preparation of nanosize cerium oxide particles in W/O microemulsions
62
Preparation of nano-size particles of silver with femtosecond laser ablation in water
63
Preparation of nano-size ZrB2 powder by self-propagating high-temperature synthesis
64
Preparation of nano-sized amorphous molybdenum dioxide powders by use of γ-ray radiation method
65
Preparation of nanosized anatase TiO2-coated kaolin composites and their pigmentary properties
66
Preparation of nanosized barium zirconate powder by thermal decomposition of urea in an aqueous solution containing barium and zirconium, and by calcination of the precipitate
67
Preparation of nanosized cobalt aluminate powders by a hydrothermal method
68
Preparation of nanosized crystalline TiO2 particles at low temperature for photocatalysis
69
Preparation of nano-sized flake carboxymethyl cassava starch under ultrasonic irradiation
70
Preparation of nano-sized flower-like ZnO bunches by a direct precipitation method
71
Preparation of nano-sized functional materials using laser ablation in liquids
72
Preparation of nanosized hydroxyapatite particles at low temperatures
73
Preparation of nanosized iron oxide and its application in low temperature CO oxidation
74
Preparation of nanosized La2CuO4 perovskite oxide using an amorphous heteronuclear complex as a precursor at low-temperature
75
Preparation of nano-sized Mg0.6Al0.8Ti1.6O5 powders using the inorganic salts route
76
Preparation of nanosized micro/mesoporous composites
77
Preparation of nanosized nickel aluminate spinel by a sonochemical method
78
Preparation of Nano-sized Nickel Metal Particles by Microwave Irradiation
79
Preparation of Nanosized Nickel Particles by Hydrothermal Method
80
Preparation of nano-sized platinum metal catalyst using photo-assisted deposition method on mesoporous silica including single-site photocatalyst
81
Preparation of nanosized semiconductor CdS particles by emulsion liquid membrane with o-phenanthroline as mobile carrier
82
Preparation of nano-sized starch particles by complex formation with n-butanol
83
Preparation of nano-sized starch particles by complex formation with n-butanol
84
Preparation of nanosized synthetic rutile from ilmenite concentrate
85
Preparation of nanosized tin oxide (SnO2) powder by homogeneous precipitation
86
Preparation of nanosized TiO2/ZnO composite catalyst and its photocatalytic activity for degradation of methyl orange
87
Preparation of nanosized titania by hydrolysis of alkoxide titanium in micelles
88
Preparation of Nanosized Zero-Valent zinc (Zn^0) Immobilized on ZnO as Redox Nanocomposite for Degradation of Methyl Orange from Aqueous Solution
89
Preparation of nanosized ZnO and dielectric properties of composites filled with nanosized ZnO
90
Preparation of nanosized ZnO using a brass
91
Preparation of nanospheres with polystyrene shells and cross-linked poly(methacrylamide) cores: a solution approach
92
Preparation of nanospinels NiMnxFe2−xO4 using sol–gel method and their applications on removal of azo dye from aqueous solutions
93
Preparation of Nano-Structural Al2O3-TiB2 In-Situ Composite Using Mechanically Activated Combustion Synthesis Followed by Intensive Milling
94
Preparation of nanostructure CuO/ZnO mixed oxide by sol–gel thermal decomposition of a CuCO3 and ZnCO3: TG, DTG, XRD, FESEM and DRS investigations
95
Preparation of nanostructure mixed copper-zinc oxide via co-precipitation rout for dye-sensitized solar cells: The influence of blocking layer and Co(II)/Co(III) complex redox shuttle
96
Preparation of nanostructured alumina–titania composite powders by spray drying, heat treatment and plasma treatment
97
Preparation of nanostructured bainite in medium-carbon alloysteel
98
Preparation of nano-structured BaTiO3 thin film by electrophoretic deposition and its characterization
99
Preparation of nano-structured cathode for protonic ceramic fuel cell by bead-milling method
100
Preparation of nanostructured Cr1−xTixN ceramics by spark plasma sintering and their properties Original Research Article
101
Preparation of nano-structured cryptomelane materials for catalytic oxidation reactions
102
Preparation of nanostructured microspheres of Zn–Mg–Al layered double hydroxides with high adsorption property
103
Preparation of nanostructured Ni/Al2O3 composite coatings in high magnetic field
104
Preparation of nano-structured Ni–Ce0.8Gd0.2O1.9 anode materials for solid oxide fuel cells via the water-in-oil (W/O) micro-emulsion route
105
Preparation of nanostructured nickel aluminate spinel powder from spent NiO/Al2O3 catalyst by mechano-chemical synthesis
106
Preparation of nanostructured NiFe2O4 catalysts by combustion reaction
107
Preparation of nanostructured nitrogen-containing carbon catalysts for the oxygen reduction reaction from SiO2- and MgO-supported metal particles
108
Preparation of nanostructured Pd particles using a seeding synthesis approach—Application to the selective hydrogenation of buta-1,3-diene Original Research Article
109
Preparation of nano-structured Pt–YSZ composite and its application in oxygen potentiometric sensor
110
Preparation of nano-structured strontium carbonate from Dashte kavir celestite ore via mechanochemical method
111
Preparation of nanostructured TiO2 ceramics by spark plasma sintering
112
Preparation of nanostructured YSZ granules by the spray drying method
113
Preparation of nanostructured Zn–Cr–O spinel powders by ultrasonic spray pyrolysis
114
Preparation of nanostructures composed of dextran sulfate/ruthenium nanoparticles and their interaction with phospholipid monolayers at a liquid–liquid interface
115
Preparation of nanostructures NiO and their electrochemical capacitive behaviors
116
Preparation of Nano-TiO2 Doped with Cerium and Its Photocatalytic Activity
117
Preparation of nano-TiO2 from TiCl4 by dialysis hydrolysis
118
Preparation of nano-TiO2/activated carbon composite and its electrochemical characteristics in non-aqueous electrolyte
119
Preparation of nanowall Bi2S3 films by chemical bath deposition
120
Preparation of nanowires of M substituted manganese dioxides (M=Al, Co, Ni) by the electrochemical–hydrothermal method Original Research Article
121
Preparation of nano-ZnO/PMMA composite particles via grafting of the copolymer onto the surface of zinc oxide nanoparticles
122
Preparation of Na-P1 and sodalite octahydrate zeolites from interstratified illite–smectite
123
Preparation of naproxen–excipient formulations by CO2 precipitation on a slurry
124
Preparation of narrow or monodisperse poly(ethyleneglycol dimethacrylate) microspheres by distillation–precipitation polymerization
125
Preparation of N-arylamines from 2-oxo-7-azobicyclo[4.1.0]heptanes
126
Preparation of natural gas adsorbents from high-sulfur petroleum coke
127
Preparation of natural microcrystalline graphite with high sphericity and narrow size distribution
128
Preparation of natural rubber–montmorillonite nanocomposite in aqueous medium: evidence for polymer–platelet adhesion
129
Preparation of Natural Standard Reference Material (SRM) for Ellajjun Oil Shale/Jordan
130
Preparation of natural zeolite templated carbon and its nanopore formation mechanism
131
Preparation of natural zeolitic supports for potential biomedical applications
132
Preparation of NaxBayBiO3·nH2O and their photooxidation characteristic under visible-light irradiation
133
Preparation of Nb doped PZT film by RF sputtering
134
Preparation of Nd(III) Carbonate by Precipitation Stripping of Nd(III)-Loaded VA10
135
Preparation of Nd-Fe-B Magnets by Screen Printing Original Research Article
136
Preparation of N-doped activated carbons for electric double-layer capacitors from waste fiberboard by K2CO3 activation
137
Preparation of N-doped activated carbons for electric double-layer capacitors from waste fiberboard by K2CO3 activation
138
Preparation of N-doped TiO2 photocatalyst by atmospheric pressure plasma process for VOCs decomposition under UV and visible light sources
139
Preparation of near micrometer-sized TiO2 nanotube arrays by high voltage anodization
140
Preparation of near net-shape carbon foams from allyl COPNA-modified bismaleimide resin
141
Preparation of near net-shape carbon foams from allyl COPNA-modified bismaleimide resin
142
Preparation of near-infrared absorbing composites comprised of conjugated macroligands on the surface of PbS nanoparticles
143
Preparation of near-infrared light absorbing gold nanoparticles using polyethylene glycol-attached dendrimers
144
Preparation of nearly monodisperse pH-responsive microgels by radiation-induced dispersion polymerization
145
Preparation of needle shaped nano-copper by microwave-assisted water system and study on its application of enhanced epoxy resin coating electrical conductivity
146
Preparation of needle-like poly(azomethine) crystals by means of reaction-induced crystallization of oligomers
147
Preparation of negative electrodes for lithium-ion rechargeable battery by pressure-pulsed chemical vapor infiltration of pyrolytic carbon into electro-conductive forms
148
Preparation of neodymium-doped yttrium aluminum garnet powders and fibers
149
Preparation of nepheline glass–ceramics for dental applications
150
Preparation of network-like MgO nanobelts on Si substrate
151
Preparation of networks of gelatin and genipin as degradable biomaterials
152
Preparation of networks with C60 knots using anionic polymers.
153
Preparation of neurotensin analogs with a novel pro-tyr replacement
154
Preparation of neutron-activated xenon for liquid xenon detector calibration
155
Preparation of neutron-activated xenon for liquid xenon detector calibration
156
Preparation of new ‘diazo’ complexes of manganese stabilised by phosphite ligands
157
Preparation of new amide-linked pseudodisaccharides by the carboxymethylglycoside lactone (CMGL) strategy
158
Preparation of new azobenzene crown ether p-tert-butylcalix[4]arenes and their roles as switchable ionophores for Na+ and K+ ions
159
Preparation of new bis(oxazoline) ligand bearing non-covalent interaction sites and an application in the highly asymmetric Diels–Alder reaction
160
Preparation of new C2-symmetric tetraphosphine ligands for Rh-catalyzed asymmetric hydrogenation of arylenamides
161
Preparation of new chiral building blocks via asymmetric catalysis
162
Preparation of new crosslinked chitosan with crown ether and their adsorption for silver ion for antibacterial activities
163
Preparation of new dinuclear half-titanocene complexes with ortho- and meta-xylene linkages and investigation of styrene polymerization
164
Preparation of new ferroelectric glycine phosphite single crystals
165
Preparation of new glass systems by the polymeric precursor method for dental applications
166
Preparation of new heteronuclear (NH4)RE[FeII(CN)6]·nH2O complexes (RE = La, Ce, Pr, Nd, Sm, Gd, Dy, Y, Er, Lu) and their low-temperature decomposition for perovskite-type oxide
167
Preparation of new heterotopic ligands
168
Preparation of New HPLC Stationary Phase and Study of Its Chromatographic Performance Toward the Separation of Some Water-Soluble Vitamins
169
Preparation of new imidazol-2-yl-(amino)methylphosphonates, phosphinates and phosphine oxides and their unexpected cleavage under acidic conditions
170
Preparation of new inorganic–organic complexes by using FexTi1–2xNb1+xO5 – (x = 0–0.5) nanosheets
171
Preparation of new lipases derivatives with high activity–stability in anhydrous media: adsorption on hydrophobic supports plus hydrophilization with polyethylenimine
172
Preparation of new mefenamic acid compounds and evaluation the biological activities of their derivatives
173
Preparation of new molecularly imprinted nanosensor for cholic acid determination
174
Preparation of new molecularly imprinted quartz crystal microbalance hybride sensor system for 8-hydroxy-2′-deoxyguanosine determination Original Research Article
175
Preparation of new monomers aza-β3-aminoacids for solid-phase syntheses of aza-β3-peptides
176
Preparation of new nanocomposite film for controlling Listeria monocytogenes and Staphylococcus aureus in raw rainbow trout fillet
177
Preparation of new n-type conducting poly(arylene)s by organometallic process and their electrical and optical properties
178
Preparation of new organic-inorganic nanocomposite by intercalation of organic compounds into MoO3 by ultrasound
179
Preparation of new polymer electrolytes based on poly(acrylonitrile-co-vinylimidazoline) matrix and improvement of polarization behavior of lithium electrode in the electrolyte by using cascade nitrile compound
180
Preparation of new polymethylmethacrylate–silica gel anion exchange composite fibers and its application in making membrane electrode for the determination of As(V) Original Research Article
181
Preparation of new proton exchange membranes using sulfonated poly(ether sulfone) modified by octylamine (SPESOS)
182
Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines
183
Preparation of New Pyridoacridine Derivatives and Formal Synthesis of 11-Hydroxyascididemine
184
Preparation of New Robust Organic Gels by in situ Cross-link of a Bis(diacetylene) Gelator
185
Preparation of new self-humidifying composite membrane by incorporating graphene and phosphotungstic acid into sulfonated poly(ether ether ketone) film
186
Preparation of new semifluorinated aromatic poly(ether amide)s and evaluation of pervaporation performance for benzene/cyclohexane 50/50 mixture
187
Preparation of new solid phase micro extraction fiber on the basis of atrazine-molecular imprinted polymer: Application for GC and GC/MS screening of triazine herbicides in water, rice and onion Original Research Article
188
Preparation of new solid superacid catalyst, zirconium sulfate supported on γ-alumina and activity for acid catalysis
189
Preparation of new tetraaza macrocyclic nickel(II) and copper(II) complexes bearing N-propionic methyl ester groups
190
Preparation of new titanium oxy nitride based electro catalysts using an anhydrous sol-gel method for water electrolysis in acid medium
191
Preparation of new type of azacalixarene, azacalix[n](2,6)pyridine
192
Preparation of new type of Sn-Pt/SiO2 catalysts for carbonyl activation Original Research Article
193
Preparation of new zirconium phosphates by solvothermal reaction
194
Preparation of N-grafted polyanilines utilizing ring-opening copolymerization of epoxide: Tuning of solubility and optical and electrochemical properties of polyaniline
195
Preparation of NHC-substituted phosphitepalladacycles
196
Preparation of N-Heterocycles by Radical Cyclisation of Enamides Mediated by Manganese(III) or Copper(I). A Comparison of Cyclisation Methods
197
Preparation of N-hydroxysuccinimido esters via palladium-catalyzed carbonylation of aryl triflates and halides
198
Preparation of Ni nanoparticle-doped carbon fibers
199
Preparation of Ni paste using binary powder mixture for thick film electrodes
200
Preparation of Ni(II)/Ti(IV) layered double hydroxide at high supersaturation
201
Preparation of Ni/Al2O3 nanocomposite powder by high-energy ball milling and subsequent heat treatment
202
Preparation of Ni/Al2O3–ZrO2 catalysts and their application to hydrogen production by steam reforming of LNG: Effect of ZrO2 content grafted on Al2O3
203
Preparation of Ni/MgxTi1 − xO catalysts and investigation on their stability in tri-reforming of methane
204
Preparation of Ni/Pt catalysts supported on spinel (MgAl2O4) for methane reforming
205
Preparation of Ni/SiO2 catalyst with high thermal stability for CO2-reforming of CH4 Original Research Article
206
Preparation of Ni/TiO2 composite hollow fibers by electroless plating
207
Preparation of Ni/TiO2 composite hollow fibers by electroless plating
208
Preparation of Ni/YSZ materials for SOFC anodes by buffer-solution method
209
Preparation of Ni0.1Mg0.9O nanocrystalline powder and its catalytic performance in methane reforming with carbon dioxide
210
Preparation of Ni1−xMnxFe2O4 ferrites by sol–gel method and study of their cation distribution
211
Preparation of NiAl–TiC nanocomposite by mechanical alloying
212
Preparation of NiB nanoparticles in water-in-oil microemulsions and their catalysis during hydrogenation of carbonyl and olefinic groups Original Research Article
213
Preparation of Nickel Aluminum–Manganese Spinel Oxides NixAl1-xMn2O4 for Oxygen Electrocatalysis in Alkaline Medium: Comparison of Properties Stemming from Different Preparation Methods
214
Preparation of nickel and copper coated fine tungsten powder
215
Preparation of nickel and copper coated fine tungsten powder
216
Preparation of nickel and copper submicrometer particles by pyrolysis of their formates
217
Preparation of nickel catalysts supported on CaO.2Al2O3 for methane reforming with carbon dioxide
218
Preparation of nickel coated YSZ powder for application as an anode for solid oxide fuel cells
219
Preparation of nickel ferrite from thermolysis of nickel tris(malonato)ferrate(III) heptahydrate precursor
220
Preparation of nickel hydroxide nanorods/nanotubes and microscopic nanorings under hydrothermal conditions
221
Preparation of nickel modified activated carbon/AB5 alloy composite and its electrochemical hydrogen absorbing properties
222
Preparation of nickel nanoparticle/graphene composites for non-enzymatic electrochemical glucose biosensor applications
223
Preparation of Nickel Nanoparticles by Intramolecular Reaction of Nickel(II) Hydrazine Complex in the Solid State at Room Temperature
224
Preparation of nickel nanopowders in ethanol-water system (EWS)
225
Preparation of nickel oxide and carbon nanosheet array and its application in glucose sensing
226
Preparation of nickel oxide– and nickel–silica nanocomposites by spray pyrolysis
227
Preparation of nickel oxide powder by decomposition of basic nickel carbonate in microwave field with nickel oxide seed as a microwave absorbing additive
228
preparation of nickel oxide supported zeolite catalyst (nio/na-zsm-5) for asphaltene adsorption: a kinetic and thermodynamic study
229
Preparation of nickel oxyhydroxide by a new electrolysis method using spherical β-Ni(OH)2
230
Preparation of nickel phosphide/SBA-15/cordierite monolithic catalysts and catalytic activity for hydrodesulfurization of dibenzothiophene
231
Preparation of nickel-coated graphite by electroless plating under mechanical or ultrasonic agitation
232
Preparation of nickel-coated titanium carbide particulates and their use in the production of reinforced iron matrix composites
233
Preparation of nickel-coated tungsten carbide powders by room temperature ultrasonic-assisted electroless plating
234
Preparation of Nickel–Tungsten Bimetallic Carbide Catalysts
235
Preparation of Ni-coated Si3N4 powders via electroless plating method
236
Preparation of Ni–Cu/Mg/Al catalysts from hydrotalcite-like compounds for hydrogen production by steam reforming of biomass tar
237
Preparation of Ni–Cu–Mo–Cr film deposited on AZ31magnesium alloy by double glow sputtering with Cu interlayer
238
Preparation of NiCuZn ferrite nanoparticles from chemical co-precipitation method and the magnetic properties after sintering
239
Preparation of Ni-doped carbon nanospheres with different surface chemistry and controlled pore structure
240
Preparation of Ni-doped ZnO ceramics for thermoelectric applications
241
Preparation of Ni-g-polymer core–shell nanoparticles by surface-initiated atom transfer radical polymerization
242
Preparation of NiMo/KIT-6 hydrodesulfurization catalysts with tunable sulfidation and dispersion degrees of active phase by addition of citric acid as chelating agent
243
Preparation of NiMo/γ-Al2O3 catalysts with large pore size for vacuum residue hydrotreatment
244
Preparation of Nimodipine Loaded Microspheres: Evaluation of Parameters
245
Preparation of NiMoO2S2 nanoparticle and investigation of its tribological behavior as additive in lubricating oils
246
Preparation of NiO and CoO nanoparticles using M2+-oleate (M = Ni, Co) as precursor
247
Preparation of NiO nanoparticles and their catalytic activity in the thermal decomposition of ammonium perchlorate
248
Preparation of NiO nanoparticles from metal-organic frameworks via a solid-state decomposition route
249
Preparation of NiO through NaNO3–KNO3 eutectic melt and its catalytic activity during the decomposition of polystyrene
250
Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC
251
Preparation of NiO-YSZ/YSZ bi-layers for solid oxide fuel cells by electrophoretic deposition
252
Preparation of NiPCeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction
253
Preparation of Ni-reduced graphene oxide nanocomposites by Pd-activated electroless deposition and their magnetic properties
254
Preparation of nitrate-H2SO4-graphite intercalation compounds by a two-step intercalation method
255
Preparation of nitrides and carbides from g-C3N4
256
Preparation of Nitriles from Primary Alcohols by a New Type of Oxidation-reduction Condensation Using 2,6-Dimethyl-1,4-benzoquinone and Diethyl Cyanophosphonate
257
Preparation of nitrilotriacetic acid/Co2+-linked, silica/boron-coated magnetite nanoparticles for purification of 6 × histidine-tagged proteins
258
Preparation of nitrogen doped K2Nb4O11 with high photocatalytic activity for degradation of organic pollutants Original Research Article
259
Preparation of nitrogen doped TiO2 nanofibers by near field electrospinning (NFES) technique for NO2 sensing
260
Preparation of nitrogen doped TiO2 photocatalyst by oxidation of titanium nitride with H2O2
261
Preparation of nitrogen-containing 20-membered tetraolefinic macrocycles: (E,E,E,E)-1,6,11,16-tetra(arylsulfonyl)-1,6,11,16-tetraazacycloicosa-3,8,13,18-tetraenes
262
Preparation of nitrogen-containing carbon nanotubes and study of their performance as basic catalysts Original Research Article
263
Preparation of nitrogen-containing heterocycles using ring-closing metathesis (RCM) and its application to natural product synthesis
264
Preparation of Nitrogen-doped Anatase Titania by Treatment of Layered Titania/Isostearate Nanocomposite with Aqueous Ammonia
265
Preparation of nitrogen-doped carbon nanotube arrays and their catalysis towards cathodic oxygen reduction in acidic and alkaline media Original Research Article
266
Preparation of Nitrogen-Doped Graphene Aerogel/Epoxy Nanocomposites and Experimental Study of Mechanical Properties
267
Preparation of Nitrogen-Doped Graphene by Solvothermal Process as Supporting Material for Fuel Cell Catalysts
268
Preparation of nitrogen-doped graphene supporting Pt nanoparticles as a catalyst for oxygen reduction and methanol oxidation
269
Preparation of nitrogen-doped macro-/mesoporous carbon foams as electrode material for supercapacitors
270
Preparation of nitrogen-doped mesoporous carbon nanopipes for the electrochemical double layer capacitor
271
Preparation of nitrogen-doped porous carbon by ammonia gas treatment and the effects of N-doping on water adsorption Original Research Article
272
Preparation of nitrogen-doped titania using sol–gel technique and its photocatalytic activity
273
Preparation of nitrogen-doped titanium dioxide with visible-light photocatalytic activity using a facile hydrothermal method Original Research Article
274
Preparation of nitrogen-doped YSZ thin films by pulsed laser deposition and their characterization
275
Preparation of nitrogen-enriched carbon materials and their application for electrochemical capacitors
276
Preparation of nitrogen-rich pitches from diazanaphthalenes using AlCl3 Original Research Article
277
Preparation of NiW catalysts with alumina and zeolite Y for hydroprocessing of coal tar
278
Preparation of Ni–YSZ composite materials for solid oxide fuel cell anodes by the gel-precipitation method
279
Preparation of N-methoxycarbonyl-N′-[2-nitro-4(5)-propylthiophenyl]thiourea as prodrugs of albendazole
280
Preparation of N-methylaniline capped mesoporous TiO2 spheres by simple wet chemical method
281
Preparation of N-nosyl-3,4-epimines derived from levoglucosan by sodium borohydride reduction
282
Preparation of noble metal nanocatalysts and their applications in catalytic partial oxidation of methane
283
Preparation of noble metal nanoparticles in supercritical carbon dioxide
284
Preparation of No-carrier-added [1-11C]Ethylene and [1-11C]1,2-Dibromoethane as new labelling agents
285
Preparation of No-Carrier-Added Technetium-99m Complexes via Metal-Assisted Cleavage from a Solid Phase
286
Preparation of non-aggregation YAG-Ce phosphor particles by spray pyrolysis
287
Preparation of non-contact ordered array of polystyrene colloidal particles by using a metallic thin film of fused hemispheres
288
Preparation of Non-Grinding Long Afterglow SrAl2O4: Eu2+, Dy3+ Material by Microwave Combustion Method
289
Preparation of non-precious metal catalysts for PEMFC cathode from pyrolyzed vitamin B12
290
Preparation of non-stoichiometric (Zn,Fe)S chalcogenides and evaluation of their thermal, optical and electrical properties Original Research Article
291
Preparation of nonstoichiometric calcium hydroxyapatite using formamide
292
Preparation of Non-Stoichiometric Nd1-xMnO3-y by Coprecipitation Method
293
Preparation of non-thrombogenic materials using 2-methacryloyloxyethyl phosphorylcholine
294
Preparation of non-woven mats from all-aqueous silk fibroin solution with electrospinning method
295
Preparation of non-woven nanofibers of Bombyx mori silk, Samia cynthia ricini silk and recombinant hybrid silk with electrospinning method
296
Preparation of nonwoven polyimide/silica hybrid nanofiberous fabrics by combining electrospinning and controlled in situ sol–gel techniques
297
Preparation of novel 2-(trialkylsilyl)ethyl linkers and first synthesis of Tryprostatin B on solid phase
298
Preparation of novel 3,7-, 7,9- and 1,7-disubstituted guanines
299
Preparation of novel 3H-trifluoromethyldiazirine-based photoactivatable potassium channel antagonists
300
Preparation of novel alginate based anion exchanger from Ulva japonica and its application for the removal of trace concentrations of fluoride from water
301
Preparation of novel alumina nanowire solid-phase microextraction fiber coating for ultra-selective determination of volatile esters and alcohols from complicated food samples
302
Preparation of novel analgesics via diastereoselective nucleophilic addition to 1-dimethylamino-2-methylpentan-3-one
303
Preparation of novel anthranilic acids as antibacterial agents. Extensive evaluation of alternative amide bioisosteres connecting the A- and the B-rings
304
Preparation of novel anthranilic acids as antibacterial agents: Extensive evaluation of structural and physical properties on antibacterial activity and human serum albumin affinity
305
Preparation of novel antibacterial agents. Replacement of the central aromatic ring with heterocycles
306
Preparation of Novel Arabic Gum-C6H9NO Biopolymer as a Bedsore for Wound Care Application
307
Preparation of novel Au/Pt/Ag trimetallic nanoparticles and their high catalytic activity for aerobic glucose oxidation Original Research Article
308
Preparation of novel aza-1,7-annulated indoles and their conversion to potent indolocarbazole kinase inhibitors
309
Preparation of novel benzoxazine monomers containing ferrocene moiety and properties of polybenzoxazines
310
Preparation of novel bicyclic piperazines by reduction of bicyclo[4.2.2]diketopiperazines: rearrangement involving 1,2-bond migration
311
Preparation of novel bio-matrix by the complexation of DNA and metal ions
312
Preparation of novel calcia-stabilized TZP ceramics
313
Preparation of novel carbon microfiber/carbon nanofiber-dispersed polyvinyl alcohol-based nanocomposite material for lithium-ion electrolyte battery separator
314
Preparation of novel CdS-incorporated special glass composite as photocatalyst material used for catalyst-fixed system
315
Preparation of novel ceramic membranes modified by mesoporous silica with 3-aminopropyltriethoxysilane (APTES) and its application to Cu2+ separation in the aqueous phase
316
Preparation of novel chabazite (CHA)-type zeolite layer on porous α-Al2O3 tube using template-free solution
317
Preparation of novel chitosan scaffolds by electrochemical process
318
Preparation of novel composite membranes for the pervaporation separation of water–acetic acid mixtures
319
Preparation of novel composite membranes: Reactive coating on microporous poly(ether imide) support membranes
320
Preparation of novel composite nanoclusters and their application in the ultrasensitive detection of proteins
321
Preparation of novel composite nanoclusters and their application in the ultrasensitive detection of proteins Original Research Article
322
Preparation of novel composite NF membranes by electropolymerization on a conducting nanocomposite UF support Original Research Article
323
Preparation of novel cross-linked fluoroalkyl end-capped adamantane cooligomer/copper nanocomposites
324
Preparation of novel fluoroalkyl end-capped oligomeric nanoparticles-encapsulated hibitane
325
Preparation of Novel Hollow Fiber Silica Using Collagen Fibers as a Template
326
Preparation of novel hydrophobic fluorine-substituted-alkyl sulfate ionic liquids and application as an efficient reaction medium for lipase-catalyzed reaction
327
Preparation of novel immunomagnetic cellulose microspheres via cellulose binding domain-protein A linkage and its use for the isolation of interferon α-2b
328
Preparation of novel ion exchange polyurethane foam and its application for separation and determination of palladium in environmental samples Original Research Article
329
Preparation of novel kaolin-based particle electrodes for treating methyl orange wastewater
330
Preparation of novel layer-stack hexagonal CdO micro-rods by a pre-oxidation and subsequent evaporation process
331
Preparation of novel magnetic cellulose microspheres via cellulose binding domain–streptavidin linkage and use for mRNA isolation from eukaryotic cells and tissues
332
Preparation of novel magnetic chitosan/graphene oxide composite as effective adsorbents toward methylene blue
333
Preparation of novel magnetic fluorescent nanoparticles using amino acids
334
Preparation of novel mesoporous carbons for the adsorption of an inflammatory cytokine (IL-1β)
335
Preparation of novel multifunctional amino alcohols from nitroparaffins and α,β-unsaturated aldehydes
336
Preparation of novel optical fibre-based Cocaine sensors using a molecular imprinted polymer approach
337
Preparation of novel organometallic derivatives of cholesterol and their gel-formation properties
338
Preparation of novel phosphor using intercalation of tobermorite
339
Preparation of novel pitches by tar air-blowing Original Research Article
340
Preparation of novel poly(vinyl alcohol)/SiO2 nanocomposite membranes by a sol–gel process and their application on alkaline DMFCs Original Research Article
341
Preparation of novel polymer materials through intermacromolecular complexation
342
Preparation of novel polysubstituted chiral cyclohexanone derivatives containing a quaternary carbon by Ferrier reaction
343
Preparation of novel polythioether dendrons on a solid support
344
Preparation of novel porous carbon spheres from corn starch
345
Preparation of novel positively charged copolymer membranes for nanofiltration
346
Preparation of novel PPES-B UF membrane with good thermal stability: The effect of additives on membrane performance and cross-section morphology
347
Preparation of novel pyridine-fused tris-heterocycles; pyrido[4,3-e]pyrrolo-/pyrido[4,3-e]furano[2,3-c]pyridazines and pyrido[3,4-b]pyrrolo[3,2-d]pyrrole
348
Preparation of novel Raney-Ni catalysts and characterization by XRD, SEM and XPS Original Research Article
349
Preparation of novel RuB amorphous alloy catalyst supported on carbon nanotubes
350
Preparation of novel Sb2O3/WO3 photocatalysts and their activities under visible light irradiation
351
Preparation of novel silver nanoplates/graphene composite and their application in vanillin electrochemical detection
352
Preparation of novel SiO2 protected Ag thin films with high reflectivity by magnetron sputtering for solar front reflectors
353
Preparation of novel solid-phase microextraction fibers by sol–gel technology for headspace solid-phase microextraction-gas chromatographic analysis of aroma compounds in beer
354
Preparation of novel SrTiO3:Rh/Ta photocatalyst by spray pyrolysis and its activity for H2 evolution from aqueous methanol solution under visible light
355
Preparation of Novel Thermo-sensitive Polymer/βCD/WS2 Nano-carriers for invitro Drug Release of Tamoxifen in the Presence and Absence of Near-Infrared (NIR) Laser
356
Preparation of novel TiP2O7 carbon composite using ion-exchanged resin (C467) and evaluation for photocatalytic decomposition of 2-propanol Original Research Article
357
Preparation of novel titania support by applying the multi-gelation method for ultra-deep HDS of diesel oil Original Research Article
358
Preparation of novel whey protein-based aerogels as drug carriers for life science applications
359
Preparation of novel β,β-diphenyl α-(trifluoromethyl)vinylstannane and its cross-coupling reactions with aryl iodides
360
Preparation of novel β-cyclodextrin chiral stationary phase based on click chemistry
361
Preparation of novel β-cyclodextrin functionalized monolith and its application in chiral separation
362
Preparation of Novolak Type Resin by Liquefaction of Palm Oil Empty Fruit Bunch (EFB) Using Sulphuric Acid as a Catalyst
363
Preparation of NOx modified PMMA–EGDM composite membrane for the recovery of chromium (VI)
364
Preparation of N-protected allylic amines and α-methylene-β-amino acids from vinylalumination/Baylis–Hillman products via tandem SN2′ substitution–Overman rearrangement
365
Preparation of n-tetradecane-containing microcapsules with different shell materials by phase separation method
366
Preparation of n-type nano-scale MnSi1.7 films by addition of iron
367
Preparation of N-unsubstituted β-ketoamides by Rhodococcus rhodochrous-catalysed hydration of β-ketonitriles
368
Preparation of nurse leaders in the 21st century workplace
369
Preparation of nursesto meet the needs of an ethnically diverse society: educational implications
370
Preparation of N-vanillyl chitosan and 4-hydroxybenzyl chitosan and their physico-mechanical, optical, barrier, and antimicrobial properties
371
Preparation of O-(Aminopropyl)inulin
372
Preparation of O/W and W/O Nanoemulsions Based on Olive Oil and Investigation of Its Physicochemical Properties and Oxidative Stability
373
Preparation of o/w emulsions stabilized by solid particles and their characterization by oscillatory rheology
374
Preparation of O/W nanoemulsion containg saffron aqueous solution and sesame oil and evaluation of its properties
375
Preparation of O/W Pickering emulsion with oxygen plasma treated carbon nanotubes as surfactants
376
Preparation of O-acylated low-molecular-weight carrageenans with potent anti-HIV activity and low anticoagulant effect
377
Preparation of oil palm (Elaeis) empty fruit bunch activated carbon by microwave-assisted KOH activation for the adsorption of methylene blue
378
Preparation of oil-in-water emulsions using polyamide 10 kDa hollow fiber membrane
379
Preparation of oleyl alcohol from the hydrogenation of methyl oleate in the presence of cobalt–tin catalysts Original Research Article
380
Preparation of oligoaniline derivative/polyvinylpyrrolidone nanofibers containing silver nanoparticles
381
Preparation of oligo-arylamides and their characterization by reaction calorimetry
382
Preparation of oligonucleotide microarrays on modified glass using a photoreactive heterobifunctional reagent, 1-N-(maleimidohexanoyl)-6-N-(anthraquinon-2-oyl) hexanediamine (MHAHD)
383
Preparation of oligonucleotide-dexamethasone conjugates
384
Preparation of oligonucleotides without aldehyde abasic sites
385
Preparation of oligosaccharides from Chinese yam and their antioxidant activity
386
Preparation of one dimensional Bi2O3-core/ZnO-shell structures by thermal evaporation and atomic layer deposition
387
Preparation of one-dimensional (1D) polyaniline–polypyrrole coaxial nanofibers and their application in gas sensor
388
Preparation of one-dimensional nickel nanowires by self-assembly process
389
Preparation of onion-like multilayered particles comprising mainly poly(iso-butyl methacrylate)-block-polystyrene by two-step AGET ATRP
390
Preparation of open cellular PMMA microspheres by supercritical carbon dioxide foaming
391
Preparation of open porous polycaprolactone microspheres and their applications as effective cell carriers in hydrogel system
392
Preparation of optical axial GRIN components through migration of charged amorphous ZrO2 nanoparticles inside an organic–inorganic hybrid matrix by electrophoresis
393
Preparation of Optical Window in the Infrared Region (3- 5) μm Using Al2O3 Material
394
Preparation of optically active (acyloxy)alkyl esters from optically active O-acyl-α-hydroxy acids
395
Preparation of optically active α-hydroxy oxime ether by diastereoselective imino 1,2-Wittig rearrangement of hydroximates and its application to synthesis of (+)-cytoxazone
396
Preparation of optically pure (3E,5E)-alkyl-2-hydroxy-6-arylhexa-3,5-dienoates by Candida parapsilosis ATCC 7330 mediated deracemisation of the racemates
397
Preparation of optically pure alkyl 3-(hetero-2-yl)-3-hydroxypropanoates by Candida parapsilosis ATCC 7330 mediated deracemisation
398
Preparation of optically pure cross-conjugated cyclopentadienones
399
Preparation of Orange-Red Long Afterglow Phosphors Y2O2S:Sm3+, Mg2+, Ti4+
400
Preparation of ordered graphene-based conductive membrane
401
Preparation of ordered magnetic iron nanowires in the mesoporous silica matrix
402
Preparation of ordered mesoporous carbon membranes by a soft-templating method Original Research Article
403
Preparation of Ordered Mesoporous W/MCM-41 and its Catalytic Performance in Oxidative Desulfurization of Dibenzothiophene
404
Preparation of ordered mono-particulate film from colloidal solutions on the surface of water and continuous transcription of film to substrate
405
Preparation of Ordered Multilayer Titania/polymer Nanocomposite Thin Films by Evaporation-induced Self-assembly
406
Preparation of ordered porous SnO2 films by dip-drawing method with PS colloid crystal templates
407
Preparation of ordered thin gold films
408
Preparation of organic acid anion-modified magnesium hydroxides by coprecipitation: A novel material for the uptake of heavy metal ions from aqueous solutions Original Research Article
409
Preparation of organic fluids containing Cyanex 302-modified ZnS particles with high loading concentration and their tribological properties
410
Preparation of organic metal nanocrystals in polymer matrix
411
Preparation of organic monolayers with azide on porous silicon via Si–N bonds
412
Preparation of organic tofu using organic compatible magnesium chloride incorporated with polysaccharide coagulants
413
Preparation of organic/inorganic composite membranes using two types of polymer matrix via a sol–gel process
414
Preparation of organic/inorganic hybrid nanocomposites by ultraviolet irradiation and their packaging applications for organic optoelectronic devices
415
Preparation of organic/inorganic hybrid nanomaterials using aggregates of poly(stearyl methacrylate)-b-poly(3-(trimethoxysilyl) propyl methacrylate) as precursor
416
Preparation of organic/inorganic hybrid semi-interpenetrating network polymer electrolytes based on poly(ethylene oxide-co-ethylene carbonate) for all-solid-state lithium batteries at elevated temperatures
417
Preparation of organic/inorganic nanocomposites with polyacrylamide (PAM) hydrogel by 60Co γ irradiation
418
Preparation of organically dispersible graphene nanosheet powders through a lyophilization method and their poly(lactic acid) composites Original Research Article
419
Preparation of organic-functionalized mesoporous ZSM-5 zeolites by consecutive desilication and silanization
420
Preparation of organic–inorganic (SWCNT/TWEEN–TEOS) nano hybrids and their NO gas sensing properties
421
Preparation of organic–inorganic composites containing rod-like phthalocyanine polymers
422
Preparation of organic–inorganic hybrid cation-exchange membranes via blending method and their electrochemical characterization
423
Preparation of organic–inorganic hybrid silica membranes using organoalkoxysilanes: The effect of pendant groups
424
Preparation of organic–inorganic hybrid silica monolith with octyl and sulfonic acid groups for capillary electrochromatograhpy and application in determination of theophylline and caffeine in beverage
425
Preparation of Organic-Inorganic Hybrid Vesicle "Cerasome" Derived from Artificial Lipid with Alkoxysilyl Head
426
Preparation of Organic–Inorganic Multifunctional Nanocomposite Coating via Sol-Gel Routes
427
Preparation of organic–inorganic nanocomposite membrane using a reactive polymeric dispersant and compatibilizer: Proton and methanol transport with respect to nano-phase separated structure
428
Preparation of organic–inorganic nanocomposite membranes as proton exchange membranes for direct dimethyl ether fuel cell application Original Research Article
429
Preparation of organic–inorganic nano-composites for antireflection coatings
430
Preparation of organic-silica hybrid boronate affinity monolithic column for the specific capture and separation of cis-diol containing compounds
431
Preparation of organo nanoclay incorporated polyamide/ melamine cyanurate/nanoclay composites and study on thermal and mechanical behaviours
432
Preparation of Organo Nanoclay Incorporated Polyamide/ Melamine Cyanurate/Nanoclay Composites and Study on Thermal and Mechanical Behaviours
433
Preparation of organocobalt complexes through C–F/C–H bond activation of polyfluoroaryl imines
434
Preparation of organomanganese reagents from organic halides with activated manganese
435
Preparation of organometallic uracil-analogue Fischer carbene complexes: Comparative study of conventional heating vs microwave irradiation
436
Preparation of Organophilic Pd–Montmorillonite, An Efficient Catalyst in Alkyne Semihydrogenation
437
Preparation of organosoluble conductive polyaniline via precipitation polymerization and study of its conductivity
438
Preparation of organo-soluble polyanilines in ionic liquid
439
Preparation of organotitanium molecular layers for biomedical applications
440
Preparation of organozirconium aromatic compounds in mixed aqueous-organic solvents: X-ray structures of [Cp2ZrCl(μ2-O′,O′′C-C6H5)], [(CpZr)3(μ2-O′,O′′C-C6H3Cl2)3(μ3-OH)(μ2-OH)3](Cl2C6H3COO)2, and [(CpZr)3(μ2-O′,O′′C-C6H4Cl)3(μ3-OH)(μ2-OH)3]Cl2·CH2Cl2
441
Preparation of oriented graphite/polymer composite sheets with high thermal conductivities by tape casting
442
Preparation of oriented graphite/polymer composite sheets with high thermal conductivities by tape casting
443
Preparation of oriented SiO32− doped TiO2 film and degradation of methylene blue under visible light irradiation
444
Preparation of oriented TiO2 nanobelts by microemulsion technique
445
Preparation of oriented TiO2 nanobelts by microemulsion technique
446
Preparation of Orthogonal π-Conjugated Aryl Alkynes and Cyclophanes
447
Preparation of orthogonally functionalized surface using micromolding in capillaries technique for the control of cellular adhesion
448
Preparation of orthogonally protected (2S,3R)-2-amino-3-methyl-4-phosphonobutyric acid (Pmab) as a phosphatase-stable phosphothreonine mimetic and its use in the synthesis of polo-box domain-binding peptides
449
Preparation of orthogonally protected chitosan oligosaccharides: observation of an anomalous remote substituent effect
450
Preparation of orthorhombic LiMnO2 material via the sol–gel process
451
Preparation of Overexchanged Fe–ZSM-5 Zeolites Using the Ferrous Oxalate Method: Why Does It Fail?
452
Preparation of oxetanes by 4-endo trig electrophilic cyclisations of cinnamic alcohols
453
Preparation of oxetanes by silicon-directed 4-exo trig electrophilic cyclisations of homoallylic alcohols
454
Preparation of oxidation protective ZrB2–SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites
455
Preparation of oxide particles with ordered macropores by colloidal templating and spray pyrolysis Original Research Article
456
Preparation of oxide thin films by controlled diffusion of oxygen atoms
457
Preparation of oxide with nano-scaled pore diameters using gel template
458
Preparation of oxidized agar and characterization of its properties
459
Preparation of oxidized glucose-crosslinked N-alkylated chitosan membrane and in vitro studies of pH-sensitive drug delivery behaviour
460
Preparation of oxime dual NK1/NK2 antagonists with reduced NK3 affinity
461
Preparation of oxygen evolution layer/La0.6Ca0.4CoO3 dense membrane/porous support asymmetric structure for high-performance oxygen permeation
462
Preparation of Oxygen Ion Conducting Ceramic Hollow-Fiber Membranes
463
Preparation of oxynitride glasses from woody biofuel ashes
464
Preparation of P(AN–MMA) microporous membrane for Li-ion batteries by phase inversion
465
Preparation of palladium and silver alloy membrane on a porous α-alumina tube via simultaneous electroless plating
466
Preparation of palladium film by coating photolysis process using KrF or ArF excimer laser
467
Preparation of palladium membrane by electroplating on AISI 316L porous stainless steel supports and its use for methanol steam reformer
468
Preparation of palladium membrane by bio-membrane assisted electroless plating for hydrogen separation
469
Preparation of palladium membrane on Pd/silicalite-1 zeolite particles modified macroporous alumina substrate for hydrogen separation
470
Preparation of palladium membrane over porous stainless steel tube modified with zirconium oxide
471
Preparation of palladium nanocrystals by membrane absorption of hydrogen
472
Preparation of palladium nanoparticles on alumina surface by chemical co-precipitation method and catalytic applications
473
Preparation of palladium oxide nanoparticles-encapsulating porous oxide catalysts for oxidation utilizing a silsesquioxane ligand
474
Preparation of palladium(II) complexes with long alkyl chain ligand incorporated in micelle
475
Preparation of palladium-coated V and V–15Ni membranes for hydrogen purification by electroless plating technique
476
Preparation of palladium–iron alloy in the graphite matrix
477
Preparation of Palm Oil Methyl Esters for Alkenyl Succinic Anhydride Production
478
Preparation of palm olein enriched with medium chain fatty acids by lipase acidolysis
479
Preparation of PAN/phenolic-based carbon/carbon composites with flexible towpreg carbon fiber
480
Preparation of PANI-coated poly (styrene-co-styrene sulfonate) nanoparticles in microemulsion media
481
Preparation of PANI-coated poly(styrene-co-styrene sulfonate) nanoparticles
482
Preparation of PANI–CuZnO ternary nanocomposite and investigation of its effects on polyurethane coatings antibacterial, antistatic, and mechanical properties
483
Preparation of paraffin/expanded graphite phase change composites for thermal storage
484
Preparation of parathion imprinted polymer beads and its applications in electrochemical sensing
485
Preparation of parent polyaniline thin films using the self-assembly technique
486
Preparation of partially benzylated mono-, di-, and trisaccharides by selective cleavage of the β-fructofuranosidic linkage in fully benzylated sucrose and sucrose-related oligosaccharides under acidic conditions
487
Preparation of particle-stabilized oil-in-water emulsions with the microchannel emulsification method
488
Preparation of particulate Li4Ti5O12 having excellent characteristics as an electrode active material for power storage cells
489
Preparation of particulate/polymeric sol–gel derived microporous silica membranes and determination of their gas permeation properties
490
Preparation of Passion Fruit Puree by Flash Vacuum-Expansion
491
Preparation of passive Cu–Ni–Fe coating on low-carbon steel for improving corrosion resistance
492
Preparation of patterned GaAs structures for MEMS and MOEMS
493
Preparation of Pb(Zr,Ti)O3 thin films by soft chemical route
494
Preparation of Pb(Zr,Ti)O3–Pb(Mg1/3Nb2/3)O3 piezoelectric ceramics by dry–dry method
495
Preparation of Pb0.98La0.02(Zr0.65Ti0.35)O3 films and their fine patterning
496
Preparation of Pb1−xLaxTi1−x/4O3 (x=0.28) powders by a sol–gel-hydrothermal method
497
Preparation of Pb-free silver paste containing nanoparticles
498
Preparation of PBI/PTFE composite membranes from PBI in N,N′-dimethyl acetamide solutions with various concentrations of LiCl
499
Preparation of PbO nanoparticles by microwave irradiation and their application to Pb(II)-selective electrode based on cellulose acetate
500
Preparation of PbS and PbSe nanocrystals by a new solvothermal route
501
Preparation of PbTiO3 by seeding-assisted chemical sol-gel
502
Preparation of PbTiO3 nanoceramics based on hydrothermal nanopowders and characterization of their electrical properties
503
Preparation of PbZrxTi1 − xO3/La1 − xSrxCoO3 heterostructures using the sol-gel method and their electrical properties
504
Preparation of PCM microcapsules by using oil absorbable polymer particles
505
Preparation of PCR samples from food by a rapid and simple centrifugation technique evaluated by detection of Escherichia coli O157:H7
506
Preparation of Pd (0) and Pd (II) nanotubes and nanoparticles on modified bentonite and their catalytic activity in oxidation of ethyl benzene to acetophenone Original Research Article
507
Preparation of Pd Cluster/Polymer Composites Using Bis(acetylacetonato)palladium(II) Vapor
508
Preparation of Pd supported mesoporous activated carbons and their catalytic activity
509
Preparation of Pd/C catalysts via ultrasound: a study of the metal distribution
510
Preparation of Pd/C catalysts via ultrasound: a study of the metal distribution
511
Preparation of Pd/C designed for chiral modified catalyst: Comparison with Pd/TiO2 in enantioselective hydrogenation of α-phenylcinnamic acid Original Research Article
512
Preparation of Pd/CexZr1-xO2/SiO2 and its catalyticperformance in methane combustion
513
Preparation of Pd0 nanoparticles stabilized by polymers and layered silicate
514
Preparation of Pd–B/TiO2 amorphous alloy catalysts and their performance on liquid-phase hydrogenation of p-nitrophenol
515
Preparation of Pd-based intermetallic targets for high intensity irradiations
516
Preparation of Pd-based intermetallic targets for high intensity irradiations
517
Preparation of Pd-coated polymer electrolyte membranes and their application in direct methanol fuel cells
518
Preparation of Pd-PS, Pd-PSB and Pd-PSC nanoparticles by γ-irradiation and their catalytic efficiency in Sonogashira coupling reaction
519
Preparation of Pdshell–Aucore/SiO2 catalyst and catalytic activity for acetylene hydrogenation Original Research Article
520
Preparation of peach gum polysaccharides using hydrogen peroxide
521
Preparation of PEDOT/Cu composite film by in situ redox reaction between EDOT and copper(II) chloride
522
Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots
523
Preparation of PEDOT:PSS thin films doped with graphene and graphene quantum dots
524
Preparation of PEGylated liposomes of docetaxel using supercritical fluid technology
525
Preparation of PEI-coated bacterial biosorbent in water solution: Optimization of manufacturing conditions using response surface methodology
526
Preparation of Pellets by Urban Waste Compost
527
Preparation of PEM fuel cell electrodes using pulse electrodeposition
528
Preparation of penta-azole containing cyclopeptides: challenges in macrocyclization
529
Preparation of pentagamaboronon-0 and its fructose and sorbitol complexes as boron carrier for boron neutron capture therapy (BNCT) application
530
Preparation of peptide thioesters using Fmoc strategy through hydroxyl side chain anchoring
531
Preparation of peptide-like bicyclic lactams via a sequential Ugi reaction––olefin metathesis approach
532
Preparation of perfluorocyclopentenylmetal species and their cross-coupling reaction with electrophiles—Remarkable accesses to versatile perfluorocyclopentene derivatives
533
Preparation of peri-annulated indoles from polynitro compounds
534
Preparation of perinones via a novel multicomponent synthesis of isoindole scaffold
535
Preparation of periodic mesoporous silica-included divacant Keggin units for the catalytic oxidation of styrene to synthesize styrene oxide
536
Preparation of Periodic Microstructured Diamond Surfaces
537
Preparation of Permanent Red 24 Nanoparticle by Oil in Water Microemulsion
538
Preparation of permeability-controlled track membranes on the basis of ‘smart’ polymers
539
Preparation of perovskite alumina ceramic membrane using sol–gel method
540
Preparation of Perovskite Nanocomposites and Photochemical Degradation Kinetics of Acid Yellow 199
541
Preparation of perovskite type manganite on Al/sub 2/O/sub 3/ substrate as an excellent buffer layer for YBa/sub 2/Cu/sub 3/O/sub 7-(delta)/ growth
542
Preparation of perovskite type titanium-bearing blast furnace slag photocatalyst doped with sulphate and investigation on reduction Cr(VI) using UV–vis light
543
Preparation of perovskite-type composite oxide LaNi0.5Ti0.5O3–NiFe2O4 and its application in glucose biosensor
544
Preparation of Persisted Luminescence Pigment and Investigation in Glaze Compatibility
545
PREPARATION OF PERVAPORATION MEMBRANE USING A-TYPE ZEOLITE FILLED CHITOSAN MEMBRANE FOR THE SEPARATION OF ISOPROPANOL/WATER MIXTURES
546
Preparation of perylene nanoparticles with a membrane mixer
547
Preparation of PET threads reinforced PVDF hollow fiber membrane Original Research Article
548
Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose
549
Preparation of pH responsive porous glass by surface modification with COOH group
550
Preparation of pH sensitive poly(vinilydenefluoride) porous membranes by grafting of acrylic acid assisted by supercritical carbon dioxide
551
Preparation of phase change material–montmorillonite composites suitable for thermal energy storage
552
Preparation of phase pure and well-crystallized Li4Ti5O12 nanoparticles by precision control of starting mixture and calcining at lowest possible temperatures Original Research Article
553
Preparation of phase pure Ba(Zn1/3Ta2/3)O3 nanopowders for microwave dielectric resonator applications
554
Preparation of Phase-change Material Microcapsuleswith Paraffin or Camel Fat Cores:Application to Fabrics
555
Preparation of Phase-Inversion Cellulose Acetate Membranes on Electrodes with Resolvation of the Polymer by Acetone Vapor Prior to the Gelation Step
556
Preparation of Phase-Inversion Cellulose Acetate Membranes on Electrodes with Resolvation of the Polymer by Acetone Vapor Prior to the Gelation Step
557
Preparation of phase-separated textures and crystalline phases from two-liquid immiscible melts in the TiO2–SiO2 system
558
Preparation of phase-transfer catalytic porous membrane by γ-ray irradiation grafting and its application in nucleophilic substitution reaction
559
Preparation of pHEMA–CP composites with high interfacial adhesion via template-driven mineralization
560
Preparation of phenalenes and hydronaphthacenes through tandem alkyne Fischer–carbene complex coupling and inter- or intra-molecular Diels–Alder reactions
561
Preparation of phenol from benzene by one-step reaction Original Research Article
562
Preparation of phenolic compounds through catalyst-free ipso-hydroxylation of arylboronic acids
563
Preparation of phenolic resin complexes
564
Preparation of phenolic-based carbon foam with controllable pore structure and high compressive strength
565
Preparation of phenothiazine bonded silica gel as sorbents of solid phase extraction and their application for determination of nitrobenzene compounds in environmental water by gas chromatography–mass spectrometry
566
Preparation of phenyl group-functionalized magnetic mesoporous silica microspheres for fast extraction and analysis of acetaldehyde in mainstream cigarette smoke by gas chromatography–mass spectrometry
567
Preparation of phenylalanine imprinted polymer by the sol–gel transition method
568
Preparation of phenylboronic acid functionalized cation-exchange monolithic columns for protein separation and refolding
569
Preparation of phenylboronic acid-silica hybrid monolithic column with one-pot approach for capillary liquid chromatography of biomolecules
570
Preparation of phenyl-butyraldehydes using a base-catalyzed aromatization of dienones
571
Preparation of phenyl-silica hybrid monolithic column with “one-pot” process for capillary liquid chromatography
572
Preparation of phosphate promoted Na2WO4/Al2O3 catalyst and its application for oxidative desulfurization
573
Preparation of phosphinodipeptide analogs as building blocks for pseudopeptides synthesis
574
Preparation of phosphinoferrocene carboxamides from isocyanates. Synthesis and structural characterisation of palladium(II) and platinum(II) complexes with 1′-(diphenylphosphino)-1-(N-phenylcarbamoyl)ferrocene
575
Preparation of phosphoric acid-based porous geopolymers
576
Preparation of Phosphorus Doped Graphitic Carbon Nitride Using a Simple Method and Its Application for Removing Methylene Blue
577
Preparation of phosphorylated bis-pyrazolyl–pyridine nonadendate ligands and their terbium complexes. Part 2
578
Preparation of photoactive chitosan–niobium (V) oxide composites for dye degradation
579
Preparation of photoactive nitrogen-doped rutile
580
Preparation of photocatalytic Fe2O3–TiO2 coatings in one step by metal organic chemical vapor deposition
581
Preparation of photocatalytic nano-ZnO/TiO2 film and application for determination of chemical oxygen demand
582
Preparation of photocatalytic TiO2 coatings by gel-dipping with polysaccharides
583
Preparation of photocatalytic TiO2 coatings of nanosized particles on activated carbon by AP-MOCVD Original Research Article
584
Preparation of photochromic poly(vinylidene fluoride-co-hexafluoropropylene) fibers by electrospinning
585
Preparation of photochromic sol–gel composite films containing dodecaphosphotungstic acid
586
Preparation of photo-induced graft filling polymerized membranes for pervaporation using polyimide with benzophenone structure
587
Preparation of photoluminescent PMMA doped with tris(pyrazol-1-yl)borate lanthanide complexes
588
Preparation of photoluminescent single crystalline MgO nanobelts by DC arc plasma jet CVD
589
Preparation of photonic crystal heterostructures composed of two TiO2 inverse opal films with different filling factors
590
Preparation of photo-patterned polymer–hydroxyapatite composites
591
Preparation of photopolymerized nanocomposites through intercalating multifunctional acrylated siloxane into montmorillonite
592
Preparation of Photosensitive Gel Films and Fine Patterning of Amorphous Al2O3–SiO2 Thin Films
593
Preparation of pH-responsive Fe3O4/Poly (acrylic acid-stat-methyl methacrylate-block-(2-dimethylamino) ethyl methacrylate) magnetic composite microspheres and its application in controlled release of drug
594
Preparation of pH-responsive phenolphthalein poly(ether sulfone) membrane by redox-graft pore-filling polymerization technique
595
Preparation of pH-responsive polymer membranes by self-organization
596
Preparation of pH-responsive silver nanoparticles by RAFT polymerization
597
Preparation of pH-responsive stationary phase for reversed-phase liquid chromatography and hydrophilic interaction chromatography
598
Preparation of pH-sensitive CaP nanoparticles coated with a phosphate-based block copolymer for efficient gene delivery
599
Preparation of pH-sensitive lipid-modified magnetite nanoparticle dispersion
600
Preparation of pH-sensitive liposomes retaining SOD mimic and their anticancer effect
601
Preparation of pH-sensitive membranes via dopamine-initiated atom transfer radical polymerization
602
Preparation of pH-sensitive particles by membrane contactor
603
Preparation of pH-sensitive polymer by thermal initiation polymerization and its application in fluorescence immunoassay
604
Preparation of phthalocyanine(3−) species as bulk material by reduction of the dichloro(phthalocyaninato)antimony(V) complex cation
605
Preparation of physical gel consisting of syndiotactic polystyrene and poly(ethylene glycol)
606
Preparation of pigments on modified precipitated silicas
607
Preparation of pillared carbon thin films and their size selective electrical response to organic vapor
608
Preparation of pillared carbon thin films from the reduction of silylated graphite oxide by UV light irradiation and their size selective electrical response to various molecules
609
Preparation of pilot library with tetrahydro-β-carboline alkaloid core skeleton using tandem intramolecular Pictet–Spengler cyclization
610
Preparation of pilot-scale inner skin hollow fiber pervaporation membrane module: Effects of dynamic assembly conditions
611
Preparation of piperazine derivatives as 5-HT7 receptor antagonists Original Research Article
612
Preparation of pitch-based carbon foam using polyurethane foam template
613
Preparation of pitch-based carbon–copper composites for electrical applications
614
Preparation of pitch-based spherical activated carbon with developed mesopore by the aid of ferrocene Original Research Article
615
Preparation of planar and oblate particles from emulsion polymerization using polymerizable comb-like branched emulsifiers
616
Preparation of planar chiral ferrocenes containing a fluorous alcohol function
617
Preparation of planar CO2 sensor based on solid-electrolyte NASICON synthesized by sol–gel process
618
Preparation of planar graded refractive index nanocomposites using microfluidics
619
Preparation of PLA-PEG nanoparticles by the solution enhanced dispersion with enhanced mass transfer using ultrasound in supercritical CO2
620
Preparation of plasma poly(1-isoquinolinecarbonitrile) thin film and its ultrafast nonlinear optical property
621
Preparation of plasma-polymerized benzonitrile derivatives and their femtosecond time-resolved optical Kerr effect
622
Preparation of plasma-polymerized para-xylene as an alternative to parylene coating for biomedical surface modification
623
Preparation of plasma-polymerized SiOx-like thin films from a mixture of hexamethyldisiloxane and oxygen to improve the corrosion behaviour
624
Preparation of plasmid DNA polyplexes from alkaline lysates by a two-step aqueous two-phase extraction process
625
Preparation of Plasminogen by Affinity Chromatography
626
Preparation of Plastic Spherical Microlenses by Use of a Fluoropolymer Stencil and Oil-Bath Heating
627
Preparation of plated β-tricalcium phosphate containing hydroxyapatite for use in bonded inorganic-organic composites
628
Preparation of platelike nano alpha alumina particles
629
Preparation of plate-like nano α-Al2O3 using nano-aluminum seeds by wet-chemical methods
630
Preparation of Plate-shaped Crystals of Li2MnO3 by Reaction at a Solid/LiCI-Flux/Air Interface in a Tilted Crucible
631
Preparation of platinized strontium titanate covered with hollow silica and its activity for overall water splitting in a novel phase-boundary photocatalytic system
632
Preparation of platinum complexes containing a thioamide-based SCS pincer ligand and their light emitting properties
633
Preparation of platinum electrocatalysts using carbon supports for oxygen reduction at a gas-diffusion electrode
634
Preparation of platinum loaded carbon fiber by using a polymer blend
635
Preparation of platinum nanoparticles by sonochemical reduction of the Pt(IV) ions: role of surfactants
636
Preparation of platinum nanoparticles by sonochemical reduction of the Pt(IV) ions: role of surfactants
637
Preparation of platinum nanoparticles on carbon black with mixed binary surfactants: Characterization and evaluation as anode catalyst for low-temperature fuel cell
638
Preparation of platinum nanoparticles on TiO2 from DNA-protected particles
639
Preparation of platinum silicide films by pulsed laser deposition and pulsed laser annealing
640
Preparation of platinum/carbon nanotube in aqueous solution by femtosecond laser for non-enzymatic glucose determination
641
Preparation of platinum-based electrode catalysts for low temperature fuel cell
642
Preparation of Platinum-Nafion-Carbon Black Nanocomposites via a Supercritical Fluid Route as Electrocatalysts for Proton Exchange Membrane Fuel Cells
643
Preparation of platinum-on-carbon catalysts via hydrolytic deposition: Factors influencing the deposition and catalytic properties Original Research Article
644
Preparation of PLGA nanoparticles containing estrogen by emulsification–diffusion method
645
Preparation of PLLA membranes with different morphologies for culture of MG-63 Cells
646
Preparation of Pluronic/Bile salt/Phospholipid Mixed Micelles as Drug Solubility Enhancer and Study the Effect of the PPO Block Size on the Solubility of Pyrene
647
Preparation of PLZST antiferroelectric ceramics by hydroxide coprecipitation method
648
Preparation of PMDA/ODA polyimide membrane for use as substrate in a thermally stable composite reverse osmosis membrane
649
Preparation of PMMA grafted aluminum powder by surface-initiated in situ polymerization
650
Preparation of PMMA/MWNTs Nanocomposite Microcellular Foams by In-situ Generation of Supercritical Carbon Dioxide
651
Preparation of PMMA-Ni core-shell composite particles by electroless plating on polyelectrolyte-modified PMMA beads
652
Preparation of PMN–PT–BT/Ag nanocomposites by surface modification with MgO sol
653
Preparation of PNIPAM-g-P (NIPAM-co-St) microspheres and their blood compatibility
654
Preparation of p-nitrocalix[n]arene methyl ethers via ipso-nitration and crystal structure of tetramethoxytetra-p-nitrocalix[4]arene
655
Preparation of pollen for stable carbon isotope analyses
656
Preparation of poly (DMAEM)-cross linked pregelled starch graft copolymer and its application in waste water treatments
657
Preparation of poly (hydroxymethyl EDOT)/nano-silver composite films by oxidative polymerization with low-baking temperature, low resistance and good adhesion on PET substrate
658
Preparation of poly (isophthalamide-graft-methacrylamide) and its utilization in the modification of cellulose acetate ultrafiltration membranes
659
Preparation of Poly (lactic acid)/Etherified Starch Composites
660
Preparation of poly (l-lactic acid) microspheres by droplet-freezing process
661
Preparation of Poly (N- Imidazolyl maleamic acid)
662
Preparation of poly (styrene–methyl methacrylate)/SiO2 composite nanoparticles via emulsion polymerization. An investigation into the compatiblization
663
Preparation of poly (vinyl butyral) hollow fiber ultrafiltration membrane via wet-spinning method using PVP as additive Original Research Article
664
Preparation of poly 2-hydroxyethyl methacrylate functionalized carbon nanotubes as novel biomaterial nanocomposites
665
Preparation of poly acrylic acid grafted-mesoporous silica as pH responsive releasing material
666
Preparation of Poly Acrylic Acid-Poly Acrylamide Composite Nanogels by Radiation Technique
667
Preparation of poly N,N-dimethylaniline/ferrocyanide film modified carbon paste electrode: Application to electrocatalytic oxidation of l-cysteine
668
Preparation of poly( -lactic acid) and poly( -lactic-co-glycolic acid) foams by use of ice microparticulates
669
Preparation of Poly(1-vinylimidazole)-Grafted Magnetic Nanoparticles and Their Application for Removal of Metal Ions
670
Preparation of poly(2,2′-bipyridine-5,5′-diyl) derivatives by dehalogenation polycondensation by using Ni(0)-complexes. Electrical properties, optical properties and chemical reactivities of the polymers
671
Preparation of poly(2-chloroaniline) membrane and plasma surface modification
672
Preparation of poly(2-pyridone-3,5-diyl)s with –(CH2)4–SO3M (M = H or Na) side chains
673
Preparation of poly(3,3′-dialkynyl-2,2′-bithiophene-5,5′-diyl) with high coplanarity and effective π-conjugation system
674
Preparation of poly(3-hexylthiophene)/graphene nanocomposite via in situ reduction of modified graphite oxide sheets
675
Preparation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) particles in O/W emulsion
676
Preparation of poly(9-alkylcarbazole-3,6-diyl)s via palladium catalysed cross-coupling reactions
677
Preparation of poly(acrylamide-co-acrylic acid) aqueous latex dispersions using anionic polyelectrolyte as stabilizer
678
Preparation of poly(acrylamide-co-acrylic acid)-grafted gum and its flocculation and biodegradation studies
679
Preparation of poly(acrylic acid)/tricalcium phosphate nanoparticles scaffold: Characterization and releasing UC-MSCs derived exosomes for bone differentiation
680
Preparation of poly(aniline-co-o-anisidine)-intercalated mesostructured manganese oxide composites by exchange reaction
681
Preparation of poly(butyl methacrylate-co-ethyleneglyceldimethacrylate) monolithic column modified with β-cyclodextrin and nano-cuprous oxide and its application in polymer monolithic microextraction of polychlorinated biphenyls
682
Preparation of poly(butylene terephthalate)/oxazoline containing polystyrene graft copolymer through melt-blending and their application as a compatibilizer in polycarbonate/polystyrene blend
683
Preparation of poly(cyclooctene)-g-poly(ethylene glycol) (PCOE-g-PEG) graft copolymers with tunable PEG side chains via ROMP and its protein adsorption and platelet adhesion properties
684
Preparation of poly(disilanylenetetracyanobutadienyleneoligothienylene)s as new donor–acceptor type organosilicon polymers
685
Preparation of poly(ɛ-caprolactone) grafted titanate nanotubes
686
Preparation of poly(ɛ-caprolactone)-based polyurethane nanofibers containing silver nanoparticles
687
Preparation of poly(etherimide) based ultrafiltration membrane with low fouling property by surface modification with poly(ethylene glycol)
688
Preparation of poly(ethylene glycol)-modified poly(amidoamine) dendrimers with a shell of hydrophobic amino acid residues and their function as a nanocontainer
689
Preparation of poly(ethylene glycol)–polystyrene block copolymers using photochemistry of dithiocarbamate as a reduced cell-adhesive coating material
690
Preparation of poly(ethylene imine) particles for versatile applications
691
Preparation of poly(ethylene terephthalate) nonwoven fabric from endless microfibers obtained by CO2 laser-thinning method
692
Preparation of poly(glycidylmethacrylate–methylmethacrylate) magnetic beads: Application in lipase immobilization
693
Preparation of poly(hydroxyethyl methacrylate) cryogels containing l-histidine for insulin recognition
694
Preparation of poly(hydroxyethyl methacrylate-co-methacrylamidohistidine) beads and its design as a affinity adsorbent for Cu(II) removal from aqueous solutions
695
Preparation of Poly(isothianaphthene) from 2,5-Bis(trialkylsilyl)isothianaphthenes
696
Preparation of poly(lactic acid) composite hollow spheres containing calcium carbonates
697
Preparation of poly(lactic acid) composites containing calcium carbonate (vaterite)
698
Preparation of poly(lactic acid) hollow fiber membranes via phase separation methods
699
Preparation of poly(lactic acid)/chitosan nanoparticles for anti-HIV drug delivery applications
700
Preparation of poly(lactic acid)/chitosan nanoparticles for anti-HIV drug delivery applications
701
Preparation of poly(lactic acid)/siloxane/calcium carbonate composite membranes with antibacterial activity
702
Preparation of poly(l-lactic acid)-polysiloxane-calcium carbonate hybrid membranes for guided bone regeneration
703
Preparation of poly(l-lactide) and its application in bioelectrochemistry
704
Preparation of Poly(methyl acrylate)/TiO2 Composites by Potassium Diperiodatocuprateinitiated Grafting Copolymerization
705
Preparation of poly(methyl methacrylate) by ATRP using initiators for continuous activator regeneration (ICAR) in ionic liquid/microemulsions
706
Preparation of poly(methyl methacrylate)\CaCO 3\SiO 2 composite particles Tvia emulsion polymerization
707
Preparation of poly(methyl methacrylate)–TiO2 nanoparticle composites by pseudo-dispersion polymerization of methyl methacrylate in supercritical CO2
708
Preparation of poly(methyl methacrylate-co-maleic anhydride)/SiO2-TiO2 hybrid materials and their thermo- and photodegradation behaviors
709
Preparation of poly-(NIPAM) grafted hybrid silica particles with hollow structure in emulsion
710
Preparation of poly(N-isopropylacrylamide) emulsion gels and their drug release behaviors
711
Preparation of poly(N-isopropylacrylamide) grafted silica bead using hyperbranched polysiloxysilane as polymer brush and application to temperature-responsive HPLC
712
Preparation of poly(N-isopropylacrylamide)-grafted polymer monolith for hydrophobic interaction chromatography of proteins
713
Preparation of poly(N-isopropylacrylamide)-grafted well-controlled 3D skeletal monolith based on E-51 epoxy resin for protein separation
714
Preparation of poly(N-methylpyrrole) modified with pentathiepin rings and its application to positive active material for lithium secondary
715
Preparation of poly(N-vinylcarbazole) (PVK) nanoparticles by emulsion polymerization and PVK hollow particles
716
Preparation of poly(phenylene vinylene) nanofibers by electrospinning
717
Preparation of poly(phthalazinone ether sulfone ketone) asymmetric ultrafiltration membrane: II. The gelation process
718
Preparation of poly(propylene carbonate)/organo-vermiculite nanocomposites via direct melt intercalation
719
Preparation of poly(p-styrenesulfonic acid) grafted multi-walled carbon nanotubes and their application as a solid-acid catalyst
720
Preparation of poly(quinoxaline-5,8-diyl) derivatives by using zero-valent nickel complexes. Electrical and optical properties and light-emitting diodes
721
Preparation of poly(styrene-co-divinylbenzene) microspheres by membrane emulsification Original Research Article
722
Preparation of poly(tert-butyl acrylate-g-styrene) as precursors of amphiphilic graft copolymers. 1. Kinetic study and thermal properties
723
Preparation of poly(tert-butyl acrylate-g-styrene) as precursors of amphiphilic graft copolymers: 2. Relaxation processes and mechanical behavior
724
Preparation of poly(trimethyl-2-methacroyloxyethylammonium chloride-co-ethylene glycol dimethacrylate) monolith and its application in solid phase microextraction of brominated flame retardants
725
Preparation of Poly(vinyl acetate) Modified by Triethoxyvinylsilane and Properties of Copolymeric Lattices.
726
Preparation of poly(vinyl alcohol)/cellulose composite membranes for metal removal from aqueous solutions Original Research Article
727
Preparation of poly(vinyl alcohol)/kaolinite nanocomposites via in situ polymerization
728
Preparation of poly(vinyl alcohol)/poly(acrylic acid) microcapsules and microspheres and their pH-responsive release behavior
729
Preparation of poly(vinyl alcohol)/poly(acrylic acid)/TiO2/carbon nanotube composite nanofibers and their photobleaching properties
730
Preparation of poly(vinyl alcohol)/tin glycolate composite fibers by combined sol–gel/electrospinning techniques and their conversion to ultrafine tin oxide fibers
731
Preparation of poly(vinyl alcohol)-based membranes with controllable surface composition and bulk structures and their pervaporation performance
732
Preparation of poly(vinyl alcohol)-chondroitin sulfate hydrogel as matrices in tissue engineering
733
Preparation of poly(vinyl alcohol)-sodium alginate hollow-fiber composite membranes and pervaporation dehydration characterization of aqueous alcohol mixtures Original Research Article
734
Preparation of poly(vinyl phosphate-b-styrene) copolymers and its blend with PPO as proton exchange membrane for DMFC applications
735
Preparation of poly(vinyl pivalate) microspheres by dispersion polymerization in an ionic liquid and saponification for the preparation of poly(vinyl alcohol) with high syndiotacticity
736
Preparation of poly(vinylidene fluoride) films with excellent electric property, improved dielectric property and dominant polar crystalline forms by adding a quaternary phosphorus salt functionalized graphene
737
Preparation of poly(vinylidene fluoride) hollow fiber membranes for microfiltration using modified TIPS process O
738
Preparation of poly(vinylidene fluoride) microfiltration membrane with uniform surface-copolymerized poly(ethylene glycol) methacrylate and improvement of blood compatibility
739
Preparation of poly(vinylidene fluoride)(pvdf) ultrafiltration membrane modified by nano-sized alumina (Al2O3) and its antifouling research
740
Preparation of poly(vinylpyrrolidone)-protected Prussian blue nanoparticles-modified electrode and its electrocatalytic reduction for hemoglobin Original Research Article
741
Preparation of poly(vinyltetrazole) chain-grafted poly(glycidymethacrylate-co-ethylenedimethacrylate) beads by surface-initiated atom transfer radical polymerization for the use in weak cation exchange and hydrophilic interaction chromatography
742
Preparation of poly(β-hydroxybutyrate) and poly(lactide) hollow spheres with controlled wall thickness
743
Preparation of poly(ε-caprolactone)/continuous bioglass fibre composite using monomer transfer moulding for bone implant
744
Preparation of poly(ε-caprolactone)/poly(trimethylene carbonate) blend nanofibers by electrospinning
745
Preparation of poly(ε-caprolactone)/poly(trimethylene carbonate) blend nanofibers by electrospinning
746
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
747
Preparation of poly[dl-lactide-co-glycolide]-based microspheres containing protein by use of amphiphilic diblock copolymers of depsipeptide and lactide having ionic pendant groups as biodegradable surfactants by W/O/W emulsion method
748
Preparation of polyacenic semiconductive thin films by excimer laser ablation
749
Preparation of Polyacetylene Composite with some Plastic and Semiconductor for Electrical Uses.
750
Preparation of polyacrylamide and gamma-zirconium phosphate nanocomposites by intercalative polymerization
751
Preparation of polyacrylamide and gamma-zirconium phosphate nanocomposites by intercalative polymerization
752
Preparation of polyacrylamide based microgels with different charges for drug encapsulation
753
Preparation of polyacrylamide\CdS nanocomposites by a combination of reverse Tmicroemulsion and CO 2 antisolvent
754
Preparation of polyacrylonitrile – titania electrospun nanofiber and its photocatalytic dye degradation ability
755
Preparation of polyacrylonitrile nanofibers as a precursor of carbon nanofibers by supercritical fluid process
756
Preparation of polyacrylonitrile nanoparticles via dispersion polymerization of acrylonitrile using a poly(N-vinyl pyrrolidone)-cobalt complex in an aqueous system
757
Preparation of polyacrylonitrile ultrafiltration membranes for wastewater treatment Original Research Article
758
Preparation of polyaluminum chlorides containing nano-Al13 from Egyptian kaolin and application in water treatment
759
Preparation of polyamide membranes with improved chlorine resistance by bis-2,6-N,N-(2-hydroxyethyl) diaminotoluene and trimesoyl chloride Original Research Article
760
Preparation of polyamide-6/chitosan composite nanofibers by a single solvent system via electrospinning for biomedical applications
761
Preparation of polyamine-functionalized copper specific adsorbents for selective adsorption of copper
762
Preparation of polyaniline and self-doped polyaniline–clay nanocomposites in supercritical CO2: Synthesis and conductivity study
763
Preparation of polyaniline asymmetric hollow fiber membranes and investigation towards gas separation performance
764
Preparation of polyaniline coated activated carbon and their electrode performance for supercapacitor
765
Preparation of polyaniline coated poly(methyl methacrylate) microsphere by graft polymerization and its electrorheology
766
Preparation of polyaniline coating on a stainless-steel wire using electroplating and its application to the determination of six aromatic amines using headspace solid-phase microextraction
767
Preparation of polyaniline dispersions with different assembly structure
768
Preparation of polyaniline free standing film by controlled processing and its transport property
769
Preparation of polyaniline microplates via a novel template-free method
770
PREPARATION OF POLYANILINE MODIFIED ELECTRODE FOR THE ELECTROANALYSIS OF HEME PROTEINS
771
Preparation of Polyaniline Nanocomposite with Natural Clinoptilolite and Investigation of Its Special Properties
772
Preparation of polyaniline nanofibers via a novel interfacial polymerization method
773
Preparation of polyaniline nanotubes array based on anodic aluminum oxide template
774
Preparation of polyaniline submicro/nanostructures using l-glutamic acid: Loading and releasing studies of amoxicillin
775
Preparation of polyaniline/2-dimensional hexagonal mesoporous carbon composite for supercapacitor
776
Preparation of polyaniline/activated carbon composite for removal of reactive red 198 from aqueous solution
777
Preparation of polyaniline/multiwalled carbon nanotube composite by novel electrophoretic route Original Research Article
778
Preparation of polyaniline/nano-ZnO composites via a novel Pickering emulsion route
779
Preparation of polyaniline/TiO2 hybrid microwires in the microchannels of a template
780
PREPARATION OF POLYANILINE/ZnO NANOCOMPOSITES BY USING ARC-DISCHARGE SYNTHESIZED ZNO NANOPARTICLES AND PHOTOCATALYTIC APPLICATIONS
781
Preparation of Polyaniline-Clay Nanoadditive and Investigation on Anticorrosion Performance in Epoxy Coating
782
Preparation of polyaniline–Fe2O3 composite and its anticorrosion performance
783
Preparation of polyaniline-modified local clay and study of its sorption capacity
784
Preparation of polyaniline-poly(p-styrenesulfonic acid) composite by the post-polymerization method
785
Preparation of Polyaniline-Polystyrene-ZnO Nanocomposite and Characterization of Its Anti-Corrosive Performance
786
Preparation of polyaniline–TiO2 composite and its comparative corrosion protection performance with polyaniline
787
Preparation of polyaniline–TiO2 composite film with in situ polymerization approach and its gas-sensitivity at room temperature
788
Preparation of polyaniline–titanium dioxide hybrid materials in supercritical CO2
789
Preparation of polybenzoxazine foam and its transformation to carbon foam
790
Preparation of polybenzoxazine-functionalized Fe3O4 nanoparticles through in situ Diels–Alder polymerization for high performance magnetic polybenzoxazine/Fe3O4 nanocomposites
791
Preparation of polybutylene terephthalate/silica nanocomposites by melt compounding: Evaluation of surface properties
792
Preparation of polyclonal antibody against recombinant coat protein of Cucumber mosaic virus isolate B13
793
Preparation of polycrystalline BaTi2O5 by pressureless sintering
794
Preparation of polycrystalline cBN containing nanodiamond
795
Preparation of Polycrystallme HT-LiCoO2 Using Molten Salt Synthesis Method at 280 °C
796
Preparation of polydiacetylene single crystals based on physical vapor growth technique
797
Preparation of polydimethylsiloxane/β-cyclodextrin/divinylbenzene coated “dumbbell-shaped” stir bar and its application to the analysis of polycyclic aromatic hydrocarbons and polycyclic aromatic sulfur heterocycles compounds in lake water and soil by hig
798
Preparation of polydisperse polystyrene‑block‑poly(4‑vinyl pyridine) synthesized by TEMPO‑mediated radical polymerization and the facile nanostructure formation by self‑assembly
799
Preparation of polydopamine coated Fe3O4 nanoparticles and their application for enrichment of polycyclic aromatic hydrocarbons from environmental water samples
800
Preparation of polyelectrolyte multilayer films consisting of sulfonated poly (ether ether ketone) alternating with selected anionic layers
801
Preparation of polyelectrolyte multilayer membranes by dynamic layer-by-layer process for pervaporation separation of alcohol/water mixtures
802
Preparation of polyelectrolyte/calcium phosphate hybrids for drug delivery application
803
Preparation of polyethersulfone/carbon nanotube substrate for high-performance forward osmosis membrane Original Research Article
804
Preparation of polyethylene glycol/polyacrylamide adduct and utilization in cotton finishing
805
Preparation of polyethylene glycol/polyacrylamide adduct and utilization in cotton finishing
806
Preparation of polyethylene hollow fiber membrane via thermally induced phase separation
807
Preparation of polyethylene with controlled bimodal molecular weight distribution using zirconium complexes
808
Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material
809
Preparation of polyfluorinated cycloalk-1-enyl-, alk-1-enyl-, and alkyliodine tetrafluorides using XeF2 in the presence of appropriate Lewis acids as fluorooxidant
810
Preparation of polyfunctional pyridines by a palladium(0)-catalyzed cross-coupling of functionalized aryl Grignard reagents
811
Preparation of polyhedral oligomeric silsesquioxane-based hybrid monolith by ring-opening polymerization and post-functionalization via thiol-ene click reaction
812
Preparation of Polyhydroquinolines Using Nano Cerium (IV) Oxide/Zinc Oxide as a Catalyst
813
Preparation of polyhydroxyalkyl- and C-glycosylfuran derivatives from free sugars catalyzed by cerium(III) chloride in aqueous solution: an improvement of the Garcia González reaction
814
Preparation of Polyimide Ablator Coatings Using an Improved Solvent Vapor Smoothing Process
815
Preparation of polyimide composite membranes grafted by electron beam irradiation
816
Preparation of polyimide/Al2O3 composite films as improved solid dielectrics
817
Preparation of Polyion Complex Capsule and Fiber of Chitosan and Gellan-Sulfate at Aqueous Interface
818
Preparation of poly-lactic acid nano/microparticles using supercritical anti-solvent with enhanced mass transfer
819
Preparation of polymer brush-type cellulose β-ketoesters using LiCl/1,3-dimethyl-2-imidazolidinone as a solvent
820
Preparation of polymer composites using nanostructured carbon produced at large scale by catalytic decomposition of methane
821
Preparation of polymer core–shell particles supporting gold nanoparticles
822
Preparation of polymer electrolyte membranes consisting of alkyl sulfonic acid for a fuel cell using radiation grafting and subsequent substitution/elimination reactions
823
Preparation of polymer electrolyte membranes for lithium batteries by radiation-induced graft copolymerization
824
Preparation of polymer films by laser ablation of polyacrylonitrile: significant dependence on ablation wavelengths
825
Preparation of polymer latex particles carrying salt-responsive fluorescent graft chains
826
preparation of polymer nanoparticles and doping by some schiff base compounds by using microemulsion systems
827
Preparation of Polymer Particles in Aerosol-Phase Reaction
828
Preparation of polymer/clay mineral nanocomposites via dispersion of silylated montmorillonite in a UV curable epoxy matrix
829
Preparation of polymer/LDH nanocomposite by UV-initiated photopolymerization of acrylate through photoinitiator-modified LDH precursor
830
Preparation of polymer/oriented graphite nanosheet composite by electric field-inducement
831
Preparation of polymer/silica hybrid hard coatings with enhanced hydrophobicity on plastic substrates
832
Preparation of polymer/silica/polymer tri-layer hybrid materials and the corresponding hollow polymer microspheres with movable cores
833
Preparation of polymer@titania raspberry-like core–corona composite via heterocoagulated self-assembly based on hydrogen-bonding interaction
834
Preparation of polymer-bound palladium catalyst and its application to the reduction of nitro arenes and the hydrodehalogenation of aryl halides
835
Preparation of polymer-bound palladium catalyst and its application to the reduction of nitro arenes and the hydrodehalogenation of aryl halides
836
Preparation of polymer-bound pyrazolone active esters for combinatorial chemistry
837
Preparation of polymeric and metallic nanostructures using a template-based deposition method
838
Preparation of polymeric biosurfactant containing sugar and fatty acid esters
839
Preparation of polymeric hybrid nanocomposites based on PE and nanosilica
840
Preparation of polymeric macroporous rod systems: Study of the influence of the reaction parameters on the porous properties
841
Preparation of polymeric micelles based on chitosan bearing a small amount of highly hydrophobic groups
842
Preparation of Polymeric Micelles for Use as Carriers of Tuberculostatic Drugs
843
Preparation of polymeric microspheres for removal of boron by means of sorption-membrane filtration hybrid Original Research Article
844
Preparation of polymeric monoliths by copolymerization of acrylate monomers with amine functionalities for anion-exchange capillary liquid chromatography of proteins
845
Preparation of polymeric nanocapsules by radiation induced miniemulsion polymerization
846
Preparation of polymeric nanocapsules via nano-sized poly(methoxydiethyleneglycol methacrylate) colloidal templates
847
Preparation of polymeric sheet porphyrin complexes and their environmentally benignly catalytic activity
848
Preparation of polymeric urease discs by an electron beam irradiation technique
849
Preparation of polymer-protected semiconductor nanoparticles through the rapid expansion of supercritical fluid solution
850
Preparation of polymer–rare earth complex using salicylic acid-containing polystyrene and its fluorescence emission property
851
Preparation of polymers containing Fe(0)-coordinated 2,5-diethynylsilole units
852
Preparation of polymer-supported benzyllithium reagents
853
Preparation of polymer-supported palladium/N-heterocyclic carbene complex for Suzuki cross-coupling reactions
854
Preparation of polymethacrylate monolithic stationary phases having bonded octadecyl ligands and sulfonate groups: Electrochromatographic characterization and application to the separation of polar solutes for pressurized capillary electrochromatography
855
Preparation of polymethacrylic acid-grafted HEMA/PVP microspheres and preliminary study on basic protein adsorption
856
Preparation of polymorphic crystalline phases of d-mannitol: influence of keggin heteropolyanions
857
Preparation of Poly-N-Methylpyrrole Coated Platinum Modified Electrode in Chloroform in the Presence of Various Supporting Electrolytes and Its Use for the Catalytic Oxidation of Ascorbic Acid and Hydroquinone
858
Preparation of polynorepinephrine adhesive coating via one-step self-polymerization for enantioselective capillary electrochromatography coupled with electrogenerated chemiluminesense detection
859
Preparation of polyol esters based on vegetable and animal fats
860
Preparation of polyoligo(ethyleneglycol) methacrylate decorated with pendant cholesterol moieties: Hydrogel and mesoglobule preparation and their use for entrapping lipophilic nanomaterials
861
Preparation of poly-o-phenylenediamine/TiO2/fly-ash cenospheres and its photo-degradation property on antibiotics
862
Preparation of polyperinaphthalene thin films by excimer laser ablation
863
Preparation of polyphenylene film on platinum electrode in molten biphenyl medium by potential cycling method
864
Preparation of polyphenylenes via a new new route and their properties
865
Preparation of polypropylene superhydrophobic surface and its blood compatibility
866
Preparation of polypropylene/sepiolite nanocomposites using supercritical CO2 assisted mixing
867
Preparation of polypyrrole covalently attached with glucose oxidase and its application to glucose sensing
868
Preparation of polypyrrole doped with ferrocenic polymer dopants
869
Preparation of polypyrrole film with well-ordered corrugation
870
Preparation of polypyrrole films containing ferrocyanide ions deposited onto thermally pre-treated and untreated iron substrate: Application in the electroanalytical determination of ascorbic acid
871
Preparation of polypyrrole microstructures by direct electrochemical oxidation of pyrrole in an aqueous solution of camphorsulfonic acid
872
Preparation of polypyrrole/sulfonated-poly(2,6-dimethyl-1,4-phenylene oxide) conducting composites and their electrical properties
873
Preparation of polypyrrole-coated magnetic particles for micro solid-phase extraction of phthalates in water by gas chromatography–mass spectrometry analysis
874
Preparation of polypyrrole-coated silicon nanoparticles
875
Preparation of polysaccharide derivates chitosan-graft-poly(ɛ-caprolactone) amphiphilic copolymer micelles for 5-fluorouracil drug delivery
876
Preparation of polysaccharide supramolecular films by vine-twining polymerization approach
877
Preparation of polysaccharides from Acanthopanax senticosus and its inhibition against irradiation-induced injury of rat
878
Preparation of polysaccharides from cyanobacteria Nostoc commune and their antioxidant activities
879
Preparation of polysiloxane/perfluorosulfonic acid nanocomposite membranes in supercritical carbon dioxide system for direct methanol fuel cell
880
Preparation of polysilsesquioxane grafted thermoresponsive polymer by use of mercapto group
881
Preparation of polysilsesquioxane having dimethylamino group and grafted thermoresponsive polymer
882
Preparation of polysilsesquioxane-urethaneacrylate copolymer film reinforced with chitin nanofibers
883
Preparation of polystyrene brush film by radical chain-transfer polymerization and micromechanical properties
884
Preparation of polystyrene colloid particles armored by clay platelets via dispersion polymerization
885
Preparation of polystyrene grafted silica nanoparticles by two-steps UV induced reaction
886
Preparation of polystyrene latex particles by miniemulsion polymerization using a predissolved fluorinated block copolymer as the sole co-stabilizer
887
Preparation of polystyrene latex particles from radiation induced miniemulsion polymerization using Y-like branched emulsifiers as the sole stabilizer
888
Preparation of polystyrene particles with narrow particle size distribution by γ-ray initiated miniemulsion polymerization stabilized by polymeric surfactant
889
Preparation of Polystyrene submicron particles using ASES process in supercritical carbon dioxide
890
Preparation of polystyrene/graphite nanosheet composite
891
Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization
892
Preparation of polystyrene/montmorillonite nanocomposites: optimization by response surface methodology (RSM)
893
Preparation of polystyrene/poly(methyl methacrylate) blends by compressed fluid antisolvent technique
894
Preparation of polystyrene/polyaniline blends by in situ polymerization technique and their morphology and electrical property
895
Preparation of polystyrene/SiO2 microsphere via Pickering emulsion polymerization: Synergistic effect of SiO2 concentrations and initiator sorts
896
Preparation of polystyrene/zirconia core-shell microspheres and zirconia hollow shells
897
Preparation of polystyrene-based activated carbon spheres and their adsorption of dibenzothiophene
898
Preparation of polystyrene-based activated carbon spheres and their adsorption of dibenzothiophene
899
Preparation of polystyrene-based activated carbon spheres with high surface area and their adsorption to dibenzothiophene
900
Preparation of polystyrene-grafted poly(vinylidene fluoride) membranes for lithium secondary batteries
901
Preparation of polystyrene–multiwalled carbon nanotube composites with individual-dispersed nanotubes and strong interfacial adhesion
902
Preparation of Polystyrene-Supported (alpha)-Seleno Acetate and Application to Solid-Phase Synthesis of (beta)-Keto Esters
903
Preparation of polystyrene-supported Lewis acidic Fe(III) ionic liquid and its application in catalytic conversion of carbon dioxide
904
Preparation of polystyrene-supported soluble palladacycle catalyst for Heck and Suzuki reactions
905
Preparation of polysulfone membranes via vapor-induced phase separation and simulation of direct-contact membrane distillation by measuring hydrophobic layer thickness Original Research Article
906
Preparation of polysulfone nanofiltration membranes by UV-assisted grafting polymerization for water softening Original Research Article
907
PREPARATION OF POLYSULFONE NANO-STRUCTURED MEMBRANE FOR SULPHATE IONS REMOVAL FROM WATER
908
Preparation of polysulfone–Fe3O4 composite ultrafiltration membrane and its behavior in magnetic field
909
Preparation of polysulfone–polyamide thin film composite hollow fiber nanofiltration membranes and their performance in the treatment of aqueous dye solutions Original Research Article
910
Preparation of polytetrafluoroethylene porous membrane based composite alkaline exchange membrane with improved tensile strength and its fuel cell test
911
Preparation of polythiophene LB films and their gas sensitivities by the quartz crystal microbalance
912
Preparation of polyurea capsules using electrocapillary emulsification
913
Preparation of polyurea microcapsules containing ovalbumin
914
Preparation of polyurea microcapsules with different composition ratios: structures and thermal properties
915
Preparation of polyurea microcapsules with different composition ratios: structures and thermal properties
916
Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation
917
Preparation of polyvinyl alcohol–silica hybrid heterogeneous anion-exchange membranes by sol–gel method and their characterization
918
Preparation of Polyvinylchloride Nanofiltration Membrane: Investigation of the Effect of Thickness, Prior Evaporation Time and Addition of Polyethylenglchol as Additive on Membrane Performance and Properties
919
Preparation of polyvinylidene fluoride hollow fiber membranes for CO2 absorption using phase-inversion promoter additives
920
Preparation of polyvinylpyrrolidone-protected Prussian blue nanocomposites in microemulsion
921
Preparation of polyynes by laser ablation of graphite in aqueous media
922
Preparation of polyynes by liquid-phase laser ablation using different irradiation target materials and solvents Original Research Article
923
Preparation of polyynes up to C22H2 by liquid-phase laser ablation and their immobilization into SiO2 gel Original Research Article
924
Preparation of Pooled Arabidopsis YAC DNAs for PCR-Based Mapping
925
Preparation of porcelain tiles from Egyptian raw materials
926
Preparation of pore expanded mesoporous hydroxyapatite via auxiliary solubilizing template method
927
Preparation of pore size controllable macroporous polymer beads
928
Preparation of pore-filled responsive membranes using dextran precipitation
929
Preparation of porous (Ba,Sr)TiO3 by adding corn-starch Original Research Article
930
Preparation of porous Al2TiO5 ceramics reinforced by in situ formation of mullite whiskers
931
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction
932
Preparation of porous alumina–carbon nanotube composites via direct growth of carbon nanotubes
933
Preparation of porous aluminium oxide (Al2O3) hollow fibre membranes by a combined phase-inversion and sintering method
934
PREPARATION OF POROUS and DENSE BULK SAMPLES IN CALCIUM MAGNESIUM SILICATE SYSTEMS USING STEEL SLAG and DIFFERENT ADDITIVE BY CONVENTIONAL SINTERING METHOD (TECHNICAL NOTE)
935
Preparation of porous and hollow Mn2O3 microspheres and their adsorption studies on heavy metal ions from aqueous solutions
936
Preparation of porous bioactive ceramic microspheres and in vitro osteoblastic culturing for tissue engineering application
937
Preparation of porous CaCO3/PAM composites by CO2 in water emulsion templating method
938
Preparation of porous carbon derived from mixtures of furfuryl resin and glycol with controlled pore size distribution Original Research Article
939
Preparation of porous carbon films by the pyrolysis of poly(urethane-imide) films and their pore characteristics Original Research Article
940
Preparation of porous carbon nanofibers derived from graphene oxide/polyacrylonitrile composites as electrochemical electrode materials
941
Preparation of porous carbon spheres from porous starch
942
Preparation of porous carbon-doped TiO2 film by sol–gel method and its application for the removal of gaseous toluene in the optical fiber reactor
943
Preparation of porous carbons by chemical activation of polyethyleneterephthalate
944
Preparation of porous carbons from cypress using super-heated steam. I. The carbonization furnace and its characteristics
945
Preparation of porous carbons from cypress using super-heated steam. II. Pore structure of carbonized products
946
Preparation of porous carbons from cypress using super-heated steam: III. Performance in electric double layer capacitors
947
Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation
948
Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation
949
Preparation of porous carbons from petroleum coke by different activation methods
950
Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation Original Research Article
951
Preparation of porous carbons from thermoplastic precursors and their performance for electric double layer capacitors Original Research Article
952
Preparation of porous carbon–silica composite monoliths
953
Preparation of porous ceramics with controllable pore sizes in an easy and low-cost way
954
Preparation of porous ceria doped tetragonal zirconia ceramics by capsule free hot isostatic pressing
955
Preparation of porous ceria doped tetragonal zirconia ceramics by capsule free hot isostatic pressing
956
Preparation of porous chitosan/GPTMS hybrid membrane and its application in affinity sorption for tyrosinase purification with Agaricus bisporus
957
Preparation of Porous Chromia-Pillared Molybdenum Trioxide
958
Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons
959
Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons
960
Preparation of porous composite implant materials by in situ polymerization of porous apatite containing -caprolactone or methyl methacrylate
961
Preparation of porous Cu2O octahedron and its application as L-Tyrosine sensors
962
Preparation of porous flower-shaped SnO2 nanostructures and their gas-sensing property
963
Preparation of porous glass-ceramics under different hydrothermal hot pressing conditions
964
Preparation of porous glasses from phosphorus slag
965
Preparation of porous graphene using cuprous oxide microspheres as sacrificial templates for enriching proteins and peptides
966
Preparation of porous hydroxyapatite ceramics containing mullite by reaction sintering of clay, alumina and hydroxyapatite
967
Preparation of porous hydroxyapatite scaffolds
968
Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods
969
Preparation of porous ion-exchange membranes (IEMs) and their characterizations
970
Preparation of porous lanthanum phosphate with templates
971
Preparation of porous magnetic nanocomposites using corncob powders as template and their applications for electromagnetic wave absorption
972
Preparation of porous material from talc by mechanochemical treatment and subsequent leaching
973
Preparation of porous material from waste bottle glass by hydrothermal treatment
974
Preparation of porous materials with controlled pore size and porosity
975
Preparation of porous materials with ordered hole structure
976
Preparation of porous membrane by combined use of thermally induced phase separation and immersion precipitation
977
Preparation of porous membranes with the residues obtained by the extraction of coal
978
Preparation of porous microsphere-scaffolds by electrohydrodynamic forming and thermally induced phase separation
979
Preparation of porous monolayer film by immersing the stearic acid Langmuir–Blodgett monolayer on mica in salt solution
980
Preparation of porous nanorod polyaniline film and its high electrochemical capacitance performance
981
Preparation of porous nitrogen-doped titanium dioxide microspheres and a study of their photocatalytic, antibacterial and electrochemical activities
982
Preparation of porous paper composites with ruthenium hydroxide and catalytic alcohol oxidation in a multiphase gas–liquid–solid reaction
983
Preparation of porous particles by liquid–liquid interfacial crystallization
984
Preparation of porous PLGA/HA/collagen scaffolds with supercritical CO2 and application in osteoblast cell culture
985
Preparation of porous PMMA/Na+–montmorillonite cation-exchange membranes for cationic dye adsorption
986
Preparation of porous poly(ɛ-caprolactone) scaffolds by gas foaming process and in vitro/in vivo degradation behavior using γ-ray irradiation
987
Preparation of porous polymer membranes using nano- or micro-pillar arrays as templates
988
Preparation of porous polymer monolithic column incorporated with graphene nanosheets for solid phase microextraction and enrichment of glucocorticoids
989
Preparation of porous polymer monoliths featuring enhanced surface coverage with gold nanoparticles
990
Preparation of porous polymer samples for SEM: combination of photo oxidation degradation with a freeze fracture technique
991
Preparation of porous PVDF hollow fibre membrane via a phase inversion method using lithium perchlorate (LiClO4) as an additive
992
Preparation of porous PVDF-NiB capsules as catalytic adsorbents for hydrogen generation from sodium borohydride
993
Preparation of porous ruthenium catalysts utilizing a silsesquioxane ligand; catalytic activity towards hydroformylation of 1-octene Original Research Article
994
Preparation of porous scaffold from hydroxyapatite powders
995
Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods
996
Preparation of porous sheet composite impregnated with TiO2 photocatalyst by a papermaking technique
997
Preparation of Porous Si (100) for Overgrown Cubic Layer: Morphological Investigation
998
Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing
999
Preparation of porous SiC ceramics from waste cotton linter by reactive liquid Si infiltration technique
1000
Preparation of porous Si-incorporated hydroxyapatite
