<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Process of launching wet lab to perform cataract surgery on goat's eye
2
Process of magnetite fabric development during granite deformation
3
Process of Mathematical Representation Translation from Verbal into Graphic
4
Process of Microcellular Propellants with Adjustable Skin Thickness
5
Process of organizational problem definition: how to evaluate and how to improve
6
Process of polypyrrole deposit on textile. Product characteristics and applications
7
Process of prototyping coronary stents from biodegradable Fe–Mn alloys
8
Process of pyroplastic shaping for special-purpose porcelain stoneware tiles
9
Process of Re-Resourcing of Converter Slag Original Research Article
10
Process of Risk Analysis for Iranian Insurance Companies
11
Process of Scholarship of Teaching Has Been Successful in Mashad University of Medial Sciences
12
Process of simultaneous hydrogen sulfide removal from biogas and nitrogen removal from swine wastewater
13
Process of slip-surface development and formation of slip-surface clay in landslides in Tertiary volcanic rocks, Japan
14
Process of solid state reaction between doped ceria and zirconia
15
Process of the catalytic reduction of Ti(IV) in oxalate–chlorate media
16
Process of Vision Development with a Resilience Approach for Earthquake-stricken Neighborhoods of Shiroodi and Fooladi after Sarpol-e Zahab Earthquake in 2017
17
Process optimal design in non-isothermal backward extrusion of a titanium alloy by the finite element method Original Research Article
18
Process optimal design in non-isothermal, steady-state metal forming by the finite element method
19
Process optimal design in non-steady forming of porous metals by the finite element method
20
Process optimal design in non-steady forming of porous metals by the finite element method
21
Process optimal design in non-steady forming of porous metals by the finite element method
22
Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin
23
Process optimisation for a squeeze cast magnesium alloy
24
Process optimisation for a squeeze cast magnesium alloy metal matrix composite
25
Process optimisation for anion exchange monolithic chromatography of 4.2 kbp plasmid vaccine (pcDNA3F)
26
Process optimisation for fractionating Jerusalem artichoke fructans with ethanol using response surface methodology
27
Process optimisation for recovery of carotenoids from tomato waste
28
Process optimisation for the production of biodiesel from rapeseed soapstock by a novel method of short path distillation
29
Process optimization and analysis of microwave assisted extraction of pectin from dragon fruit peel
30
Process optimization and biocompatibility of cell carriers suitable for automated magnetic manipulation
31
Process Optimization and Characterization of Enhanced Vanillin Yield Using Bacillus aryabhattai NCIM 5503
32
Process optimization and electrochemical properties of lithium manganate cathode for rechargeable batteries
33
Process optimization and empirical modeling for electrospun polyacrylonitrile (PAN) nanofiber precursor of carbon nanofibers
34
Process optimization and extraction rate analysis of carotenoids extraction from rosehip fruit using supercritical CO2
35
Process Optimization and Kinetic study of Wet Peroxide Oxidation of Phenol in Wastewater over Mg-Al Nano Mixed Oxide
36
Process Optimization and Mathematical Modeling of Cartridge Filter Cleanup Using Pulse Jet Air Ring (PJAR) Technology
37
Process optimization and modeling of heavy metals extraction from a molybdenum rich spent catalyst by Aspergillus niger using response surface methodology
38
Process optimization and modeling of microencapsulated phase change material using response surface methodology
39
Process optimization and performance evaluation on sequential ionic liquid dissolution–solid acid saccharification of sago waste
40
Process Optimization and Reaction Mechanism of Removing Copper From an Fe-Rich Pyrite Cinder Using Chlorination Roasting Original Research Article
41
Process optimization and stability of d-limonene nanoemulsions prepared by catastrophic phase inversion method Original Research Article
42
Process optimization and stability of d-limonene-in-water nanoemulsions prepared by ultrasonic emulsification using response surface methodology
43
Process optimization and stability of d-limonene-in-water nanoemulsions prepared by ultrasonic emulsification using response surface methodology
44
Process optimization design for jatropha-based biodiesel production using response surface methodology
45
Process optimization diagrams for membrane microfiltration
46
Process optimization for bio-beneficiation of a chromite concentrate by a Cr(VI) reducing native microbe (Bacillus sp.)
47
Process optimization for biodiesel production from Jatropha, Karanja and Polanga oils
48
Process optimization for biodiesel production from mahua (Madhuca indica) oil using response surface methodology
49
Process optimization for bioethanol production from cassava starch using novel eco-friendly enzymes
50
Process optimization for bioscouring of cotton and lycra cotton weft knits by Box and Behnken design
51
Process Optimization for Diffusion Process and Microwave Drying of Paneer
52
Process optimization for ethanol production from very high gravity (VHG) finger millet medium using response surface methodology
53
Process optimization for extraction of carotenoids from shrimp waste with vegetable oils
54
Process optimization for fabrication of gellan based electrospun nanofibers
55
Process optimization for methyl ester production from waste cooking oil using activated carbon supported potassium fluoride
56
Process optimization for microwave-assisted direct liquefaction of Sargassum polycystum C.Agardh using response surface methodology
57
Process optimization for mineral carbonation in aqueous phase
58
Process optimization for PHA production by activated sludge using response surface methodology
59
Process optimization for poly-β-hydroxybutyrate production in a nitrogen fixing cyanobacterium, Nostoc muscorum using response surface methodology
60
Process Optimization for Preparation of Beverage from Lactose Hydrolyzed Whey Permeate
61
Process Optimization for Production of Peda from Pre-concentrated Milk by Reverse Osmosis and Vacuum Evaporation
62
Process optimization for the manufacturing of sheets with estimated balance between product quality and energy consumption
63
Process optimization for the synthesis of octenyl succinyl derivative of waxy corn and amaranth starches
64
Process optimization in laser surface structuring of alumina
65
Process optimization in stamping—a case study for flanging a clutch hub from steel plate
66
Process Optimization in Vacuum Frying of Kiwi Slices Using Response Surface Methodology
67
Process optimization of a catalyzed bleach oxidation for the production of functionalized aldehydes using microreaction technology
68
Process optimization of Al-doped zinc oxide films as a window layer for Cu(In,Ga)Se2 thin film solar cells
69
Process Optimization of an Aerobic Upflow Sludge Blanket Reactor System
70
Process optimization of an auger pyrolyzer with heat carrier using response surface methodology
71
Process optimization of biodiesel production catalyzed by CaO nanocatalyst using response surface methodology
72
Process optimization of copper MOCVD using modeling experimental design
73
Process Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays
74
Process optimization of diafiltration with time-dependent water adding for albumin production
75
Process optimization of electroless copper plating and its influence on electrochemical properties of AB5-type hydrogen storage alloy
76
Process optimization of gold stud bump manufacturing using artificial neural networks
77
Process optimization of K2C2O4-activated carbon from Prosopis africana seed hulls using response surface methodology
78
Process optimization of K2C2O4-activated carbon from Prosopis africana seed hulls using response surface methodology
79
Process Optimization of Microbially Induced Calcite Precipitation by Ureolytic Yeast Spathospora sp. NN04 using Box-Behnken Design: A Novel Approach towards Biocementation
80
Process optimization of microencapsulation of curcumin in γ-polyglutamic acid using response surface methodology
81
Process Optimization of Poly(ε-caprolactone) Synthesis by Ring Opening Polymerization
82
Process optimization of preparing silica particles with uniform distribution in sub-micron sizes using artificial neural networks
83
Process optimization of preparing spherical titania colloids with uniform distribution using artificial neural networks
84
Process Optimization of Ricotta Cheese According to Iranian Preferences
85
Process optimization of sedimentation self-assembly of opal photonic crystals under relative humidity-controlled environments
86
Process optimization of solvent based polybenzimidazole adhesive for aerospace applications
87
Process Optimization of the Selected Business Using a Process Approach
88
Process optimization of Ti–Nb alloy coatings on a Ti–6Al–4V plate using a fiber laser and blended elemental powders
89
Process optimization of ultrasound-assisted curcumin nanoemulsions stabilized by OSA-modified starch
90
Process optimization of ultrasound-assisted curcumin nanoemulsions stabilized by OSA-modified starch
91
Process optimization on leaching of a lean weathered crust elution-deposited rare earth ores
92
Process Optimization Photo-Esterification of Free Fatty Acids in Waste Cooking Oils under UV Irradiation via the RSM Method
93
Process optimization strategies to diminish variability in the quality of discrete packaged foods during thermal processing Original Research Article
94
Process optimization studies of 10-Hydroxycamptothecin (HCPT)-loaded folate-conjugated chitosan nanoparticles by SAS-ionic crosslink combination using response surface methodology (RSM)
95
Process optimization studies of Congo red dye adsorption onto cashew nut shell using response surface methodology
96
Process optimization studies of lead (Pb(II)) biosorption onto immobilized cells of Pycnoporus sanguineus using response surface methodology
97
Process optimization studies of p-xylene separation from binary xylene mixture over silicalite-1 membrane using response surface methodology
98
Process optimization studies of structured Cu–ZSM-5 zeolite catalyst for the removal of NO using design of experiments (DOE)
99
Process optimization to convert forage and sweet sorghum bagasse to ethanol based on ammonia fiber expansion (AFEX) pretreatment
100
Process Options in Hepatitis B Surface Antigen Extraction from Transgenic Potato
101
Process Oriented Data Virtualization Design Model for Business Processes Evaluation(PODVDM) Research in Progress
102
Process Oriented Guided Inquiry Learning as an Innovative Teaching Method in Clinical Biochemistry: Piloting of the Process
103
Process oriented industrial classification based on energy intensity
104
Process Parameter Analysis and process understanding — Some industrial examples
105
Process parameter dependent property studies on CdO films prepared by DC reactive magnetron sputtering
106
Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique
107
Process parameter influence on defects and tensile properties of friction stir welded T-joints on AA6061-T4 sheets
108
Process parameter influence on performance of friction taper stud welds in AISI 4140 steel
109
Process parameter optimization based on principal components analysis during machining of hardened steel
110
Process parameter optimization for instant pigeonpea dhal using response surface methodology Original Research Article
111
Process parameter optimization for MIMO plastic injection molding via soft computing
112
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry
113
Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel
114
Process parameter selection for strontium ferrite sintered magnets using Taguchi L9 orthogonal design
115
Process parameters analysis of direct laser sintering and post treatment of porcelain components using Taguchiʹs method
116
Process parameters and morphology in amoxicillin micro and submicro particles generation by supercritical antisolvent precipitation
117
Process parameters and products quality analysis of flexible-die deep-drawing using a viscoplastic pressure-carrying medium
118
Process parameters design of a three-dimensional and five-directional braided composite joint based on finite element analysis
119
Process parameters determination of phosphorescent pigment added, frit-based wall tiles vetrosa decorations
120
Process parameters influencing melt profile and hardness of pulsed laser treated Ti–6Al–4V
121
Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
122
Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
123
Process Parameters Optimization of Potential SO42-/ ZnO Acid Catalyst for Heterogeneous Transesterification of Vegetable Oil to Biodiesel
124
PROCESS PARAMETERS OPTIMIZATION ON PORTHOLE-DIE HOT EXTRUSION OF ALUMINIUM ALLOY TUBES USING TAGUCHI METHOD
125
Process Parameters Optimization to Improve Dimensional Accuracy of Stereolithography Parts
126
Process parameters selection for friction surfacing applications using intelligent decision support
127
Process parametric study for the recovery of very-fine size uranium values on super-conducting high gradient magnetic separator
128
Process performance evaluation of intermittent–continuous stirred tank reactor for anaerobic hydrogen fermentation with kitchen waste
129
Process performance monitoring in the presence of confounding variation
130
Process performance monitoring using multivariate statistical process control
131
Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater
132
Process performances and characteristics of powders produced using supercritical CO2 as solvent and antisolvent
133
Process planning and machining of generic virtual pockets by feature-composition approach
134
Process planning for circuit card assembly on a series of dual head placement machines
135
Process planning for collaborative product development with CD-DSM in optoelectronic enterprises
136
Process planning for IT-equipment remanufacturing
137
Process planning for laser-assisted forming
138
Process planning for manual PWB assembly
139
Process planning in a fuzzy environment
140
Process quality improvement: An examination of general vs. outcome-specific climate and practices in hospitals
141
Process quality improvement: An examination of general vs. outcome-specific climate and practices in hospitals
142
Process quality of classroom discourse: Pupil participation and learning opportunities
143
Process reagents for the enhanced removal of solids and water from oil sand froth
144
Process recognition in multi-element soil and stream-sediment geochemical data
145
Process recording: of what value is examining nursing interaction through assignment work?
146
Process recovery of biohydrogenation in a pilot plant from methanogens invasion
147
Process reengineering and the dynamic balance of the organisation
148
Process reengineering in the public sector: Learning some private sector lessons
149
Process related mechanical properties of press molded natural fiber reinforced polymers
150
Process reliability and safety under uncertainties
151
Process repeatability in abrasive jet micro-machining
152
Process Requirements for Cost-Effective Precision Grinding
153
Process research in strategy formation: Theory, methodology and relevance
154
Process reverse engineering for BPR: A form-based approach
155
Process Rewrite Systems
156
Process robustness of single lap ultrasonic welding of thin, dissimilar materials
157
Process safeguarding throughout the product life cycle
158
Process sampling module coupled with purge and trap–GC–FID for in situ auto-monitoring of volatile organic compounds in wastewater
159
Process scale separation of an anti-CD22 immunotoxin charge variant
160
Process Scheduling in DSC and the Large Sparse Linear Systems Challenge
161
Process semantics of general inhibitor nets
162
Process sensitivity and robustness analysis of via-first dual-damascene process
163
Process Sequence Development for Automated Progressive Freeze Concentration System
164
Process setup adjustment with quadratic loss
165
Process simulation and CFD calculations for the development of an innovative baled biomass-fired combustion chamber
166
Process simulation and economic analysis of the Calcium Looping Process (CLP) for hydrogen and electricity production from coal and natural gas
167
Process simulation and economical evaluation of enzymatic biodiesel production plant
168
Process Simulation and Microstructure Analysis of Low Carbon Si-Mn Quenched and Partitioned Steel Original Research Article
169
Process simulation and optimization of methanol production coupled to tri-reforming process
170
PROCESS SIMULATION AND QUALITY EVALUATION OF INCREMENTAL SHEET FORMING
171
Process simulation at electron beam lithography on different substrates
172
Process simulation for fuel delivery from storage and delivery system in fusion power plant
173
Process simulation for hydrogen/deuterium exchange in a packed column
174
Process simulation in stamping – recent applications for product and process design
175
Process simulation of a hybrid SOFC/mGT and enriched air/steam fluidized bed gasifier power plant
176
Process simulation of a SOFC and double bubbling fluidized bed gasifier power plant
177
Process simulation of co-firing torrefied biomass in a 220 MWe coal-fired power plant
178
Process simulation of desalination by electrodialysis of an aqueous solution containing a neutral solute Original Research Article
179
process simulation of ethanol production from jerusalem artichoke stalk
180
Process simulation of micro electro-discharge machining on molybdenum
181
Process simulation of modified dry grind ethanol plant with recycle of pretreated and enzymatically hydrolyzed distillers’ grains
182
Process simulation of natural gas steam reforming: Fuel distribution optimisation in the furnace
183
Process simulation of oxy-fuel combustion for a 300 MW pulverized coal-fired power plant using Aspen Plus
184
Process simulation of the transport gasifier
185
Process Simulation on Fast Pyrolysis of Palm Kernel Shell for Production of Fuel
186
Process simulations of HI decomposition via reactive distillation in the sulfur–iodine cycle for hydrogen manufacture
187
Process situation assessment: From a fuzzy partition to a finite state machine
188
Process Stability in the Tube Hydroforming Process
189
Process stabilization and a significant enhancement of the deposition rate in reactive high-power impulse magnetron sputtering of ZrO2 and Ta2O5 films
190
Process stabilization and enhancement of deposition rate during reactive high power pulsed magnetron sputtering of zirconium oxide
191
Process standardization and kinetics of ethanol driven biodieselproduction by transesterification of ricebran oil
192
Process standardization, characterization and storage study of a sweet potato (Ipomoea batatas L.) wine
193
Process stationarity and reliability of trunk postural stability
194
Process stress simulation of medium-high carbon steel after hard-face-welding during martensite transformation
195
Process structure properties relationship during formation of CrN and AlN layers on H13 Steel
196
Process studies of odour emissions from effluent ponds using machine-based odour measurement
197
Process studies on the ecological coupling between sea ice algae and phytoplankton
198
Process studies on the ecological coupling between sea ice algae and phytoplankton
199
Process study of circulation in the Pearl River Estuary and adjacent coastal waters in the wet season using a triply-nested circulation model
200
Process supervision by means of a hybrid model
201
Process support in learning tasks for acquiring complex cognitive skills in the domain of law
202
Process surveillance: An epidemiologic challenge for all health care organizations
203
Process synthesis for reactive separations
204
Process System Engineering (PSE) Analysis on Process and Optimization of the Isomerization Process
205
Process system engineering in biodiesel production: A review
206
Process system engineering in direct methanol fuel cell
207
Process system identification strategies based on the use of singular spectrum analysis
208
Process Systems ’05
209
Process systems and passivity via the Clausius-Planck inequality
210
Process technologies, learning and brand proliferation
211
Process technology development at Rand Refinery
212
Process technology for multi-enzymatic reaction systems
213
Process technology for production of soluble tea powder Original Research Article
214
Process Technology for the Continuous Hot Band Annealing of 17%Cr Ferritic Stainless Steel
215
Process Technology study of TiN/AlGaN/GaN Schottky contact on (111) Silicon substrate
216
Process testing of aerators in oxidation ditches
217
Process thinking in support of system specification and selection
218
Process to identify disjoint subclasses and class life cycle information using a role analysis technique
219
Process to Write American College of Cardiology Foundation/American Heart Association Guidelines in Need of Overhaul
220
Process trend analysis using wavelet-based de-noising
221
Process type identification in torrential catchments in the eastern Alps
222
Process utility and help seeking: What do people want from experts?
223
Process variability in honing of cylinder liner with vitrified bonded diamond tools
224
Process variables in the formation of nanoparticles of megestrol acetate through rapid expansion of supercritical CO2
225
Process variables in the treatment of sexual offenders: A review of the relevant literature
226
Process vectors both to create functional structures and to represent characteristics of an entire system
227
Process virtualization of large-scale lidar data in a cloud computing environment
228
Process Water Management
229
Process water production from river water by ultrafiltration and reverse osmosis
230
Process window enhancement for single point incremental forming through multi-step toolpaths
231
Process window for the synthesis of Ag wires through polyol process
232
Process Writing and Enhancement of Critical Thinking Ability: Is Writing a Vehicle or an Ingredient of Critical Thinking?
233
Process zone resolution by extended finite elements
234
Process, form and change in dryland rivers: a review of recent research
235
Process, microstructure and flexural properties of reaction sintered Tyranno SA/SiC composites
236
Process, optimization and characterization of mebeverine hydrochloride loaded guar gum microspheres for irritable bowel syndrome
237
Process, Paratexts, and Texts: Rhetorical Analysis and Virtual Worlds
238
Process, perception, and practice: Time perspectivism in Yosemite native demography
239
Process, Physicochemical Characterization and In-Vitro Assessment of Albendazole Microcrystals
240
Process, practice and priorities — key lessons learnt undertaking sensitive social reconnaissance research as part of an (UNESCO-IOC) International Tsunami Survey Team
241
Process, structure and context in relation to integrative biology
242
Processability and Miscibility of Linear Low-densityPolyethylene/Poly(vinyl alcohol) Blends: In SituCompatibilization with Maleic Acid
243
Processability and Properties of Biodegradable Plastics Made from Agricultural Biopolymers
244
Processability and Properties of Biodegradable Plastics Made from Agricultural Biopolymers
245
Processability characteristics and physico-mechanical properties of natural rubber modified with cashewnut shell liquid and cashewnut shell liquid–formaldehyde resin
246
Processability of PVDF/PMMA blends studied by torque rheometry
247
Processability Study of ABS Impact Modified PVC-U Composites - Effect of Rice Husk Ash (RHA) Fillers and Coupling Agents
248
Processability Theory: Stage-like Development of ‘Copula inversion’ and ‘Negation’ in Iranian EFL Learners’ Writing Performance
249
processability theory: stage-like development of “3 sg-s” and “cancel auxsecond” in iranian efl learners’ writing performance
250
Processability Theory: Stage-like Development of “3 sg-s” and “cancel aux-second” in Iranian EFL Learners’ Writing Performance
251
Processable forms of conductive polyaniline
252
Processable magnetic plastics composites—spin crossover of PMMA/Fe(II)-complexes composites
253
Processable polyaniline suspensions through in situ polymerization onto nanocellulose
254
Processable polyaniline/titania nanocomposites with good photocatalytic and conductivity properties prepared via peroxo-titanium complex catalyzed emulsion polymerization approach
255
Processable polyaniline–titanium dioxide nanocomposites: effect of titanium dioxide on the conductivity
256
Processable stabilizer-free polyaniline nanofiber aqueous colloids
257
PROCESS-ALTERED SURFACE CONVECTION EFFECTS IN A COUPLED THERMOELASTIC ANALYSIS OF RAPID SLIDING INDENTATION WITH FRICTION
258
Process-aware information systems: Bridging people and software through process technology
259
Process-based 2DH morphodynamic modeling of tidal inlets: A comparison with empirical classifications and theories
260
Process-based environmental communication and conflict mitigation during sudden pollution accidents
261
Process-based groundwater salinisation risk assessment methodology: Application to the Akrotiri aquifer (Southern Cyprus)
262
Process-based humidity control regime for greenhouse crops
263
Process-based interpretation of tracer tests in carbonate aquifers
264
Process-based investigation of cross-boundary environmental pressure from urban household consumption
265
Process-based leadership: Fair procedures and reactions to organizational change
266
PROCESS-BASED LEARNING: TOWARDS THEORETICAL AND LECTURE-BASED COURSEWORK IN STUDIO STYLE
267
Process-based modeling of grassland dynamics built on ecological indicator values for land use
268
Process-based modeling of grassland dynamics built on ecological indicator values for land use
269
Process-Based Modeling of Timothy Regrowth
270
Process-based modelling of invertebrate drift transport, net energy intake and reach carrying capacity for drift-feeding salmonids
271
Process-based modelling of invertebrate drift transport, net energy intake and reach carrying capacity for drift-feeding salmonids
272
Process-based modelling of isoprenoid emissions from evergreen leaves of Quercus ilex (L.)
273
Process-based models for port evolution and wreck site formation at Mombasa, Kenya
274
Process-based reactive transport modeling of a permeable reactive barrier for the treatment of mine drainage
275
Process-based research in sustainable agricultural development: integrating social, economic and ecological perspectives
276
Process-based simulation library SALMO-OO for lake ecosystems. Part 1: Object-oriented implementation and validation
277
Process-based simulation library SALMO-OO for lake ecosystems. Part 2: Multi-objective parameter optimization by evolutionary algorithms
278
Process-based snowmelt modeling: does it require more input data than temperature-index modeling?
279
Process-based tolerance assessment of connecting rod machining process
280
Process-centered knowledge model and enterprise ontology for the development of knowledge management system
281
Process-centred restoration in a fire-adapted ponderosa pine forest
282
Process-centric engineering Web services in a distributed and collaborative environment
283
Process-condition-driven Automatic Location of Components
284
Process-diagnostic patterns of chlorobiphenyl congeners in two radiochronologically characterized sediment cores from the northern Baffin Bay Original Research Article
285
Processed Allogenic Dentine as A Scaffold for Bone Healing: An in vivo study.
286
Processed cereals in diets for early-weaned piglets
287
Processed Cheese Analogues Incorporating Fat-Substitutes 1. Composition, Microbiological Quality and Flavour Changes During Storage at 5 °C
288
Processed Cheese Analogues Incorporating Fat-Substitutes 2. Rheology, Sensory Perception of Texture and Microstructure
289
Processed EEG and patient outcome
290
Processed EEG in natural sleep
291
Processed food exports from developing countries: patterns and determinants
292
Processed food trade and developing countries: protection and trade liberalization
293
Processed kaolin protects fruits from Mediterranean fruit fly infestations
294
Processed optimization for excellent interface passivation quality of amorphous/crystalline silicon solar cells
295
PROCESSED PRODUCTS OF TERMITES AND LAKE FLIES: IMPROVING ENTOMOPHAGY FOR FOOD SECURITY WITHIN THE LAKE VICTORIA REGION
296
Processed pulverized fuel ash for high-performance concrete
297
Processes active in mafic magma chambers: The example of Kilauea Iki Lava Lake, Hawaii
298
Processes affecting concentrations of fine particulate matter (PM2.5) in the UK atmosphere
299
Processes affecting deposition of oxidised nitrogen and associated species in the coastal areas of Norway
300
Processes affecting groundwater chemistry in a zone of saline intrusion into an urban sandstone aquifer
301
Processes affecting the distribution of dissolved trace metals in the North Aegean Sea (Eastern Mediterranean)
302
Processes affecting transport of uranium in a suboxic aquifer
303
Processes affecting δ34S and δ18O values of dissolved sulfate in alluvium along the Canadian River, central Oklahoma, USA
304
Processes and apparatuses for formation, separation, pelletizing storage and re-gasification of gas hydrate
305
Processes and Boundaries of the Mind: Extending the Limit Line: Yair Neuman, Kluwer Academic/Plenum Publishers, New York, 2003, 170 pages
306
Processes and continuous change in a SAT-based planner Original Research Article
307
Processes and impacts of Arctic amplification: A research synthesis
308
Processes and key properties of pool materials for “bubble fusion”
309
Processes and mechanisms controlling consumption of CFC-11 and CFC-12 by peat from a conifer-swamp and black spruce-tamarack bog in New York State
310
Processes and mechanisms of desertification in northern China during the last 30 years, with a special reference to the Hunshandake Sandy Land, eastern Inner Mongolia
311
Processes and methods for research programme priority setting: the experience of the Kenya Agricultural Research Institute Wheat Programme
312
PROCESSES AND OUTCOMES IN THREE-DIMENSIONAL MATCH AND MISMATCH CIRCUMSTANCES IN RESPECT OF LEADERSHIP STYLES, FOLLOWERSHIP STYLES AND SITUATIONAL DEMANDS IN BUSINESS ORGANISATIONS IN PAPUA NEW GUINEA
313
Processes and outcomes of story-based and skill-based social competency programs for children with emotional disabilities
314
Processes and outcomes: a comparison between specialist and generalist clinicians
315
Processes and phenomena of purity decrease during the optical resolution of dl-threonine by preferential crystallization
316
Processes and products of grounding-line fans from the Permian Pagoda Formation, Antarctica: Insight into glacigenic conditions in polar Gondwana
317
Processes and properties of snow–air transfer in the high Arctic with application to interstitial ozone at Alert, Canada
318
Processes and rate of retreat of the clay and sandstone sea cliffs of the northern Boulonnais (France)
319
Processes and rates of ice loss at the terminus of Tasman Glacier, New Zealand
320
Processes and rates of rock fragment displacement on cliffs and scree slopes in an amba landscape, Ethiopia
321
Processes and structures for generation of hydrophobic surfaces for large-scale and industrial operations
322
Processes and time-scales of energy loss of low-energy electrons (<5 eV) in liquid water
323
Processes and timescales of magma evolution prior to the Campanian Ignimbrite eruption (Campi Flegrei, Italy)
324
Processes Branching: Variation, Growth, and Extinction of Populations, Patsy Haccou, Peter Jagers, Vladimir A. Vatutin. Cambridge University Press, Cambridge, UK (2005), ISBN: 13 978-0-521-83220-9
325
Processes controlling 220Rn concentrations in the gas and water phases of porous media
326
Processes controlling ammonia emission from livestock slurry in the field
327
Processes controlling annual variations in the partial pressure of CO2 in surface waters of the central northwestern Mediterranean Sea (Dyfamed site)
328
Processes controlling aquifer fluid compositions in the Olkaria geothermal system, Kenya
329
Processes controlling cobalt distribution in two temperate estuaries, Sagami Bay and Wakasa Bay, Japan
330
Processes controlling diurnal variations of PCDD/Fs in the New Jersey coastal atmosphere
331
Processes controlling forms of phosphorus in surficial sediments from the eastern Arabian Sea impinged by varying bottom water oxygenation conditions
332
Processes controlling highly siderophile element fractionations in xenolithic peridotites and their influence on Os isotopes
333
Processes controlling interannual variations in wintertime (Northeast Monsoon) primary productivity in the central Arabian Sea
334
Processes controlling manganese distributions and associations in organic-rich freshwater aquatic systems: The example of Loch Bradan, Scotland Original Research Article
335
Processes controlling metal transport and retention as metal-contaminated groundwaters efflux through estuarine sediments
336
Processes controlling sediment yield from watersheds as functions of spatial scale
337
Processes controlling silica concentration in leaching and capillary soil solutions of an acidic brown forest soil (Rhône, France)
338
Processes controlling solubility of biogenic silica and pore water build-up of silicic acid in marine sediments
339
Processes controlling the composition of clastic sediments : Mark J. Johnsson and Abhijit Basu (Eds) Geological Society of America Special Paper 284; 1993; ISBN 0 8137 2284 5; 342 pp; softbound. Price: £45.00
340
Processes controlling the development of a river mouth spit
341
Processes controlling the distribution and cycling of manganese in the oxygen minimum zone of the Arabian Sea
342
Processes controlling the distribution and natural attenuation of dissolved phenolic compounds in a deep sandstone aquifer
343
Processes controlling the distribution of aerosol particles in the summer arctic marine boundary layer-an overview of the results from the arctic ocean expedition, 1996 (AOE-96)
344
Processes controlling the episodic streamwater transport of atrazine and other agrichemicals in an agricultural watershed
345
Processes controlling the formation of the Mertz Drift, George Vth continental shelf, East Antarctica: evidence from 3.5 kHz sub-bottom profiling and sediment cores
346
Processes controlling the geochemical composition of the South China Sea sediments during the last climatic cycle
347
Processes controlling the methanesulfonate to non-sea-salt sulfate ratio in the marine environment
348
Processes controlling the physico-chemical micro-environments associated with Pompeii worms
349
Processes controlling the position of frontal systems in Shark Bay, Western Australia
350
Processes controlling the production of aromatic water-soluble organic matter during litter decomposition
351
Processes controlling the production of aromatic water-soluble organic matter during litter decomposition
352
Processes controlling the redox budget for the oxic/anoxic water column of the Black Sea
353
Processes controlling the retention and release of manganese in the organic-rich catchment of Loch Bradan, SW Scotland
354
Processes controlling the shape of ash particles: Results of statistical IPA
355
Processes controlling the shrinkage of porphyroclasts in gabbroic shear zones
356
Processes controlling the stable isotope compositions of Li, B, Mg and Ca in plants, soils and waters: A review
357
Processes controlling trace element geochemistry of Arabian Sea sediments during the last 25,000 years
358
Processes controlling transpiration in the rainforests of north Queensland, Australia
359
Processes controlling vertical coupling and decoupling between the upper and lower crust of orogens: results from Fiordland, New Zealand
360
Processes controlling δ7Li in rivers illuminated by study of streams and groundwaters draining basalts
361
Processes dominating macro-fabric generation in periglacial colluvium
362
Processes driving sea ice variability in the Bering Sea in an eddying ocean/sea ice model: Mean seasonal cycle
363
Processes driving soil solution chemistry in a flooded rice-cropped vertisol: analysis of long-time monitoring data
364
Processes driving temporal dynamics in the nested pattern of waterbird communities
365
Processes driving the episodic flux of faecal indicator organisms in streams impacting on recreational and shellfish harvesting waters
366
Processes driving the networked economy
367
Processes driving the short-term variability of polycyclic aromatic hydrocarbons in the Baltimore and northern Chesapeake Bay atmosphere, USA
368
Processes during anodic stripping voltammetry determination of lead in the presence of copper on a solid electrode modified with 2,2′-bipyridyl in polyaniline Original Research Article
369
PROCESSES FOR ADVANCED TREATMENT OF WATER
370
PROCESSES FOR ADVANCED TREATMENT OF WATER
371
Processes for the production of ultra-pure metals from oxide and their cold rolling to ultra-thin foils for use as targets and as reference materials
372
Processes for the production of ultra-pure metals from oxide and their cold rolling to ultra-thin foils for use as targets and as reference materials
373
PROCESSES FOR THE REMOVAL OF HUMIC SUBSTANCES FROM WATER AN OVERVIEW BASED ON NORWEGIAN EXPERIENCES
374
PROCESSES FOR THE REMOVAL OF HUMIC SUBSTANCES FROM WATER AN OVERVIEW BASED ON NORWEGIAN EXPERIENCES
375
Processes forming and sustaining Saturn’s proton radiation belts
376
Processes Governing Flow and Chemical Characteristics of Discharges from Free-Draining, Underground Coal Mines
377
Processes governing the carbon chemistry during the SAGE experiment
378
Processes governing the flow redistribution in sharp river bends
379
Processes impacting on benzene removal in vertical-flow constructed wetlands
380
Processes improving the dispersibility of spray-dried zein nanoparticles using sodium caseinate
381
Processes in atherogenesis: complement activation
382
Processes in condensed inert gases involving excess electrons
383
Processes in continental collision zones: Preface
384
Processes in Group Cognitive and Behavioral Treatment for Hoarding Original Research Article
385
Processes in low-energy ion-surface collisions: preferential sputtering, defect and adatom formation
386
Processes in microbial transport in the natural subsurface
387
Processes in oxide systems under ultrasonic treatment at high temperatures
388
Processes in PM steel compacts during the initial stages of sintering
389
Processes in silicon deposition by hot-wire chemical vapor deposition
390
Processes in the benthic boundary layer at continental margins and their implication for the benthic carbon cycle
391
Processes in the benthic boundary layer at the Iberian continental margin and their implication for carbon mineralization
392
Processes influencing dissolved iron distributions below the surface at the Atlantic Ocean–Celtic Sea shelf edge
393
Processes influencing distributions and concentrations of Cd, Cu, Mn and Ni at the North West European shelf break
394
Processes Influencing Mercury Speciation and Bioconcentration in the North Inlet-Winyah Bay Estuary, South Carolina, USA
395
Processes influencing surface interaction and photocatalytic destruction of microcystins on titanium dioxide photocatalysts
396
Processes influencing suspended sediment movement on the Malin–Hebrides shelf
397
Processes influencing the chemical composition of the O-horizon of podzols along a 500-km north–south profile from the coast of the Barents Sea to the Arctic Circle
398
Processes influencing the circulation and bottom mixing across the shelf slope: the importance of the slope topography and the coast
399
Processes influencing wind-induced current profiles in near coastal stratified regions
400
Processes Integration: Multiplant Complex vs Multipurpose Plant Assessment
401
Processes Involved in Adult Ego Development: A Conceptual Framework
402
Processes involved in charging of discharged lead-acid battery electrodes by pulse methods: I. Qualitative analysis for flat negative electrodes
403
Processes Involved in Chinese and English Writing: A Study of Chinese University Students
404
Processes involved in sweeping under inhomogeneous electric field conditions as sample enrichment procedure in micellar electrokinetic chromatography
405
Processes involved in the origin and accumulation of hydrocarbon gases in the Yuanba gas field, Sichuan Basin, southwest China
406
Processes involving gases in valve-regulated lead/acid batteries
407
Processes involving heat transfer from a humid air stream to a vertical plate, with simultaneous deposition of frost, are of great importance in a variety of refrigeration equipment. In this work, frost growth on a vertical plate in free convection has be
408
Processes leading to N2O emissions in grassland soil during freezing and thawing
409
Processes leading to N2O emissions in grassland soil during freezing and thawing
410
Processes leading to the coexistence of a host and its parasitoid in homogeneous environments: The role of an infected dormant stage
411
Processes leading to the coexistence of a host and its parasitoid in homogeneous environments: The role of an infected dormant stage
412
Processes Modulating Calcium Distribution in Citrus Leaves. An Investigation Using X-Ray Microanalysis with Strontium as a Tracer
413
Processes occurring during deactivation and regeneration of metal and metal oxide catalysts
414
Processes of alienation: Marx, Orff and Kodaly
415
Processes of attenuation of dissolved arsenic downstream from historic gold mine sites, New Zealand
416
Processes of carbonate precipitation in modern microbial mats
417
Processes of care in cervical and breast cancer screening and follow-up—the importance of communication
418
Processes of change in brain and cognitive development
419
Processes of changing gambling behavior
420
Processes of coastal bluff erosion in weakly lithified sands, Pacifica, California, USA
421
Processes of coastal upwelling and carbon flux in the Cariaco Basin
422
Processes of decay of Rydberg plasma
423
Processes of decision making and end-of-life care for patients with dementia in group homes in Japan
424
Processes of decision-making in small learning groups
425
Processes of dehydration and rehydration of raffinose pentahydrate investigated by thermal analysis and FT-IR/DSC microscopic system
426
Processes of democratization in the East Central European and Balkan states: sovereignty-related conflicts in the context of Europeanization
427
Processes of desertification by goats overgrazing in the Tamaulipan thornscrub (matorral) in north-eastern Mexico
428
Processes of forest products and production costs in Guilan forests, Iran
429
Processes of island colonization by Oligo–Miocene land mammals in the central Mediterranean: New data from Scontrone (Abruzzo, Central Italy) and Gargano (Apulia, Southern Italy)
430
Processes of long-term relaxation of stratospheric aerosol layer in Northern Hemisphere midlatitudes after a powerful volcanic eruption
431
Processes of mantle enrichment and magmatic differentiation in the eastern Snake River Plain: Th isotope evidence
432
Processes of microstructural evolution during superplastic deformation
433
Processes of normal fault evolution in a siliciclastic sequence: a case study from Miri, Sarawak, Malaysia
434
Processes of organic carbon in mangrove ecosystems
435
Processes of oxidation and HCl-leaching of Tellnes ilmenite
436
Processes of physical change to the seabed and bivalve recruitment over a 10-year period following experimental hydraulic clam dredging on Banquereau, Scotian Shelf
437
Processes of Staff Onboarding in the Supply Chain Management of Industrial Enterprises: A Comparison of Best Practices and Literature
438
Processes of taking a gap-filling test: comparison of skilled and less skilled EFL readers
439
Processes of task-set reconfiguration: switching operations and implementation operations
440
Processes of the excitation energy migration and transfer in Ce3+-doped alkali gadolinium phosphates studied with time-resolved photoluminescence spectroscopy technique
441
Processes of Transition in Education Systems: Elizabeth McLeish and David Phillips (Eds.); Symposium Books, Wallingford, Oxfordshire, United Kingdom, 1998, pp. 102, Price $38.00 paperback.
442
Processes of vapor phase growth of AIIBVI single crystals and structures based there upon
443
Processes of Vertical Exchange in Shelf Seas (PROVESS)
444
Processes regulating cellular metal accumulation and physiological effects: Phytoplankton as model systems
445
Processes regulating oxygen and carbon dioxide in surface waters west of the Antarctic Peninsula
446
Processes regulating pCO2 in the surface waters of the central eastern Gotland Sea: a model study*
447
Processes regulating watershed chemical export during snowmelt, Fraser Experimental Forest, Colorado
448
Processes relating aerosol number, aerosol volume and non-seasalt sulfate concentrations in the clean and polluted marine boundary layer
449
Processes reshaping the Nile delta promontories of Egypt: pre- and post-protection
450
Processes responsible for the development of a pit and mound microrelief
451
Processes responsible for the formation and maintenance of sub-surface chlorophyll maxima in the Gulf of Finland
452
Processes responsible for the nitrous oxide emission from a Costa Rican Andosol under a coffee agroforestry plantation
453
Processes taking place in the paste of lead-acid battery plates during soaking prior to formation and their influence on battery performance
454
Processes that contribute to resilience among youth in foster care
455
Processes underlying adaptation to tempo changes in sensorimotor synchronization
456
Processes underlying sex differences in route-learning strategies in children and adolescents
457
Processes used bynurses to make decisions in the clinical practice setting
458
Processes with a t-channel singularity in the physical region: finite beam sizes make cross sections finite Original Research Article
459
Processes with nearly-sequential routings: a comparative analysis
460
Processes, barriers, and outcomes described by ergonomics consultants in preventing work-related musculoskeletal disorders
461
Processes, dynamics and modelling of radiocaesium cycling in a chronosequence of Chernobyl-contaminated Scots pine (Pinus sylvestris L.) plantations
462
Processes, procedures and journal development: Past, present and future
463
Process-form interactions in unstable sand-bed river channels: A numerical modeling approach
464
Processible conducting nanoscale cylinders due to self-organized polyaniline supramolecules
465
Processible conjugated polymers: from organic semiconductors to organic metals and superconductors
466
Processible polyacid doped polyaniline composites: Application for charge storage devices
467
Processible polyaniline complexes due to molecular recognition: Supramolecular structures based on hydrogen bonding and phenyl stacking
468
Process-induced defects and potential distribution in nearly ideal Au/Si Schottky barriers
469
Process-induced deformation of composite T-stiffener structures
470
Process-induced microstructural characteristics of laser consolidated IN-738 superalloy
471
Process-induced modification to the surface of crystalline GaAs measured by photometry
472
Process-induced phase transformation of carbamazepine dihydrate to its polymorphic anhydrates
473
Processing a detergent powder formulation: Direct compression, and high shear wet granulation followed by compression
474
Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength
475
Processing A Language without Inflections: A Reaction Time Study of Sentence Interpretation in Chinese
476
Processing a multifold ground penetration radar data using common-diffraction-surface stack method
477
Processing a multimedia join through the method of nearest neighbor search
478
Processing a rare earth mineral deposit using gravity and magnetic separation
479
Processing a spodumene ore to obtain lithium concentrates for addition to glass and ceramic bodies
480
Processing algorithm for a strapdown gyrocompass
481
Processing Ambiguous Words in Context
482
Processing an ultramafic ore using fiber disintegration by acid attack
483
Processing anaerobic sludge for extended storage as anaerobic digester inoculum
484
Processing analysis of the ternary LiNH2–MgH2–LiBH4 system for hydrogen storage
485
Processing and alloying effects on tensile and impact properties of FeAl alloys
486
Processing and alloying effects on tensile and impact properties of FeAl alloys
487
Processing and Analysis of Clinical-laboratory Features in the Therapy of Lupus Nephritis
488
Processing and analysis of electroencephalography signal to evaluate the effect of sport advertisement on customers
489
Processing and analysis of high temperature geothermal acoustic borehole image logs in the Taupo Volcanic Zone, New Zealand
490
Processing and assessment of high-performance poly(butylene terephthalate) nanocomposites reinforced with microwave exfoliated graphite oxide nanosheets
491
Processing and assessment of poly(butylene terephthalate) nanocomposites reinforced with oxidized single wall carbon nanotubes
492
Processing and ballistic performance of lightweight armors based on ultra-fine-grain aluminum composites
493
Processing and behavior of nanostructured metallic alloys and composites by cryomilling
494
Processing and biocompatibility evaluation of laser processed porous titanium
495
Processing and characterisation of a fine nickel oxide/zirconia/composite prepared by polymeric complex solution synthesis
496
Processing and characterisation of low cost Balistid fish Sufflamen capistratus liver oil for edible purpose
497
Processing and characterisation of model optomechanical composites in the system sapphire fibre/borosilicate glass matrix
498
Processing and characterisation of plasma sprayed zirconia–alumina–mullite composite coating on a mild-steel substrate
499
Processing and characterisation of three-layer alumina-based composites with enhanced damage tolerance
500
Processing and characterization of 3D woven and braided thermoplastic composites
501
Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
502
Processing and characterization of a hipped oxide dispersion strengthened austenitic steel
503
Processing and characterization of a novel nonporous poly(vinilidene fluoride) films in the β phase
504
Processing and characterization of a position sensitive lateral-effect metal oxide semiconductor detector
505
Processing and characterization of a position sensitive lateral-effect metal oxide semiconductor detector
506
Processing and characterization of a W–2Y material for fusion power reactors
507
Processing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
508
Processing and characterization of activated carbon coated magnetic particles for biomedical applications
509
Processing and characterization of Al–Cu–Li alloy AA2195 undergoing scale up production through the vacuum induction melting technique
510
Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties
511
Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties
512
Processing and characterization of alumina wire by controlled fracture forming process:: (I) Forming behavior and evolution of green microstructure
513
Processing and characterization of alumina wire by controlled fracture forming process:: (I) Forming behavior and evolution of green microstructure
514
Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
515
Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
516
Processing and characterization of an Al2O3/WC/TiC micro- nano-composite ceramic tool material
517
Processing and characterization of an hybrid fiber reinforced Ni aluminide
518
Processing and characterization of an hybrid fiber reinforced Ni aluminide
519
Processing and characterization of B4C–SiC–Si–TiB2 composites
520
Processing and characterization of bioglass reinforced hydroxyapatite composites
521
Processing and characterization of calcined kaolin cement powder
522
Processing and characterization of carob powder
523
Processing and characterization of cluster diamond dispersed Al–Si–Cu–Mg composite
524
Processing and characterization of coconut shell powder filled UHMWPE
525
Processing and characterization of coconut shell powder filled UHMWPE
526
Processing and characterization of combustion synthesized YAG powders
527
Processing and characterization of CYSZ/Al2O3 and CYSZ/Al2O3 + YSZ multilayered thermal barrier coatings
528
Processing and characterization of diffusion-bonded Al–Si interfaces
529
Processing and characterization of edgeless radiation detectors for large area detection
530
Processing and characterization of edgeless radiation detectors for large area detection
531
Processing and characterization of electrospun poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanofibrous membranes
532
Processing and characterization of electrospun Y2O3-stabilized ZrO2 (YSZ) and Gd2O3-doped CeO2 (GDC) nanofibers
533
Processing and characterization of epoxy nanocomposites reinforced by cup-stacked carbon nanotubes
534
Processing and characterization of epoxy resin dispersed with multi walled carbon nanotube (MWNT) derived from camphor
535
Processing and characterization of ferroelectric thin films obtained by pulsed laser deposition
536
Processing and characterization of fine-grained monolithic SiC ceramic synthesized by spark plasma sintering
537
Processing and characterization of graded metal/intermetallic materials: The example of Fe/FeAl intermetallics
538
Processing and characterization of high-density zirconia–carbon nanotube composites
539
Processing and Characterization of Hybrid Metal Matrix Composites
540
Processing and characterization of La0.5Sr0.5FeO3-supported Sr1−xFe(Al)O3–SrAl2O4 composite membranes
541
Processing and characterization of LDPE/starch/PCL blends
542
PROCESSING AND CHARACTERIZATION OF LEAD ZIRCONATE (PbZrO3) VIA MIX-OXIDE SINTERING ROUTE
543
Processing and characterization of metal–ceramics functionally gradient materials
544
Processing and Characterization of Nanocrystalline Mica Glass-Ceramics
545
Processing and characterization of nanocrystalline molybdenum disilicide consolidated by hot isostatic pressing (HIP
546
Processing and characterization of nano-magnetic Co0.5Ni0.5Fe2O4 system
547
Processing and characterization of nanostructured Cu-carbon nanotube composites
548
Processing and characterization of natural cellulose fibers/thermoset polymer composites
549
Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone a
550
Processing and characterization of new oxysulfide glasses in the Ge–Ga–As–S–O system
551
Processing and characterization of new oxy-sulfo-telluride glasses in the Ge–Sb–Te–S–O system
552
Processing and characterization of new passive and active oxysulfide glasses in the Ge–Ga–Sb–S–O system
553
Processing and characterization of particles reinforced Sisingle bondOsingle bondC composites via pyrolysis of polysiloxane with SiC or/and Al fillers
554
Processing and characterization of Pb(Zr,Ti)O3 thick films on platinum-coated silicon substrate derived from sol–gel deposition
555
Processing and characterization of PbS nanocrystallites in TMOS silica xerogels
556
Processing and characterization of polyethylene/Brazilian clay nanocomposites
557
Processing and characterization of porous Ti2AlC with controlled porosity and pore size Original Research Article
558
Processing and characterization of porous titanium for implants by using NaCl as space holder
559
Processing and characterization of powdered silk micro- and nanofibers by ultrasonication
560
Processing and characterization of PZFNT and PZFNT/PET thin films for pyroelectric applications
561
Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues
562
Processing and characterization of SiB0.5C1.5N0.5 produced by mechanical alloying and subsequent spark plasma sintering
563
Processing and characterization of sol–gel fabricated mixed metal aluminates
564
Processing and characterization of sol–gel titania membranes
565
Processing and characterization of solid and microcellular PHBV/coir fiber composites
566
Processing and characterization of Sr2−xVMoO6−δ double perovskites
567
Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch)
568
Processing and characterization of syntactic carbon foams containing hollow carbon microspheres Original Research Article
569
Processing and characterization of textured mullite ceramics from phyllosilicates
570
Processing and characterization of three-dimensional carbon fiber-reinforced Si–O–C composites via precursor pyrolysis
571
Processing and characterization of TiO2/ZnAl2O4 ultrafiltration membranes deposited on tubular support prepared from Moroccan clay
572
Processing and characterization of transparent TeO2–Bi2O3–ZnO glass ceramics
573
Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC
574
Processing and characterization of YBCO grain boundaries obtained by the liquid phase removal method
575
Processing and characterization of YBCO grain boundaries obtained by the liquid phase removal method
576
Processing and characterization of ZrC-reinforced steel-based composites
577
Processing and compressive creep of cast replicated IN792 Ni-base superalloy foams
578
Processing and compressive properties of aerogel/epoxy composites
579
Processing and compressive strength of Al–Li–SiCp composites fabricated by a compound billet technique
580
Processing and delivery of peptides presented by MHC class I molecules
581
Processing and dielectric characterization of Ba0.3Sr0.7TiO3 thin films on alumina substrates
582
Processing and dielectric properties of (Pb,Bi)(Mg,Nb,Ti)O3 ceramics
583
Processing and dielectric properties of Bi4Srn−3TinO3n+3 (n = 3, 4 and 5) ceramics obtained from mechanochemically activated precursors
584
Processing and dielectric properties of Bi-doped Sr(Ti0.95Zr0.05)O3 ceramics
585
Processing and dielectric properties of the mixed-layer bismuth titanate niobate Bi7Ti4NbO21 by the metal-organic precursor synthesis method
586
Processing and dimensional changes of cement based composites reinforced with surface-treated cellulose fibres
587
Processing and dry sliding wear performance of spray deposited hyper-eutectic aluminum–silicon alloys
588
Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes
589
Processing and electrical properties of carbon nanotube/vinyl ester nanocomposites
590
Processing and electrical properties of doped-LaGaO3 by gelcasting
591
Processing and electrical properties of NASICON prepared from yttria-doped zirconia precursors
592
Processing and encapsulation of silver patterns by using reactive ion etch and ammonia anneal
593
Processing and engineering of pervaporation dehydration of ethylene glycol via dual-layer polybenzimidazole (PBI)/polyetherimide (PEI) membranes
594
Processing and fabrication of mixed uranium/refractory metal carbide fuels with liquid-phase sintering
595
Processing and ferroelectric behavior of textured KSr2Nb5O15 ceramics
596
Processing and first characterization of detectors made with high resistivity n- and p-type Czochralski silicon
597
Processing and first characterization of detectors made with high resistivity n- and p-type Czochralski silicon
598
Processing and flexural properties of 3D, seven-directional braided (SiO2)f/SiO2 composites prepared by silica sol-infiltration-sintering method
599
Processing and formulation effects on rheological behavior of barley β-glucan aqueous dispersions
600
Processing and formulation of drug nanoparticles by ternary cogrinding with methacrylic copolymer and sucrose fatty acid esters
601
Processing and fracture behavior of a polyethylene-based thermoplastic adhesive and a glass-fiber filled epoxy adhesive
602
Processing and fracture behavior of a polyethylene-based thermoplastic adhesive and a glass-fiber filled epoxy adhesive
603
Processing and high strain rate impact response of multi-functional sandwich composites
604
Processing and high temperature deformation of Al2O3 fiber-reinforced NiAlFe matrix composites
605
Processing and high temperature deformation of Al2O3 fiber-reinforced NiAlFe matrix composites
606
Processing and hygrothermal effects on viscoelastic behavior of glass fiber/epoxy composites
607
Processing and immobilization of chondroitin-4-sulphate by UV laser radiation
608
Processing and impact behavior of Al/SiCp composites fabricated by the pressureless melt infiltration method
609
Processing and in vivo evaluation of multiphasic calcium phosphate cements with dual tricalcium phosphate phases
610
Processing and interface stability of SiC fiber reinforced Ti–15V–3Cr matrix composites
611
Processing and interfacial bonding strength of 2014 Al matrix composites reinforced with oxidized SiC particles
612
Processing and interpretation of 3D seismic data of an oil field in central of Iraq using AVO techniques
613
Processing And Interpretation Of Electromagnetic Induction Array Data
614
Processing and kinetics studies on the alumina enrichment of coal fly ash by fractionating silicon dioxide as nano particles
615
Processing and magnetic properties of metal-containing SiCN ceramic micro- and nano-composites
616
Processing and mechanical behavior at elevated temperatures of directionally solidified proton conducting perovskites
617
Processing and Mechanical Behavior of Al2O3/ZrO2 Nanocomposites
618
Processing and mechanical behavior of laminated titanium–titanium tri-aluminide (Ti–Al3Ti) composites
619
Processing and mechanical behavior of Zn–Al–Cu porous alloys
620
Processing and mechanical behaviour of TiAl/NiAl intermetallic composites produced by cryogenic mechanical alloying
621
Processing and mechanical behaviour of TiAl/NiAl intermetallic composites produced by cryogenic mechanical alloying
622
Processing and mechanical properties evaluation of glass fiber-reinforced PTFE laminates
623
Processing and mechanical properties of a molybdenum silicide with the composition Mo–12Si–8.5B (at.%)
624
Processing and mechanical properties of a porous low carbon steel with a controlled porous structure by imposition of a static magnetic field
625
Processing and mechanical properties of a porous low carbon steel with a controlled porous structure by imposition of a static magnetic field
626
Processing and mechanical properties of Al2O3–5 vol.% Cr nanocomposites
627
Processing and mechanical properties of AlB2 flake reinforced Al-alloy composites
628
Processing and mechanical properties of AlB2 flake reinforced Al-alloy composites
629
Processing and mechanical properties of bulk nanostructured nickel-based alloys
630
Processing and mechanical properties of carbon nanotube–alumina hybrid reinforced high density polyethylene composites
631
Processing and mechanical properties of HA/UHMWPE nanocomposites
632
Processing and mechanical properties of hydroxyapatite pieces obtained by the gelcasting method
633
Processing and mechanical properties of hydroxyapatite reinforced with hydroxyapatite whiskers
634
Processing and mechanical properties of iron aluminide composites containing oxide particles
635
Processing and mechanical properties of iron aluminide composites containing oxide particles
636
Processing and mechanical properties of materials in the Hf–N system
637
Processing and mechanical properties of nanocrystalline 5083 al alloy
638
Processing and mechanical properties of porous Fe–26Cr–1Mo for solid oxide fuel cell interconnects Original Research Article
639
Processing and mechanical properties of short carbon fibers toughened zirconium diboride-based ceramics
640
Processing and mechanical properties of short fibers/Si3N4p reinforced BaO·Al2O3·2SiO2 ceramic matrix composites
641
Processing and mechanical properties of Si3N4 composites employing polymer-derived SiAlOC as sintering aid
642
Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process
643
Processing and mechanical properties of textured mullite/zirconia composites
644
Processing and mechanical properties of Ti–6Al–4V/TiC in situ composite fabricated by gas–solid reaction
645
Processing and mechanical properties of Ti–6Al–4V/TiC in situ composite fabricated by gas–solid reaction
646
Processing and mechanical properties of ZrO2–TiB2 composites
647
Processing and mechanical response of highly textured Al2O3
648
Processing and microhardness of bulk Cu-Fe nanocomposites
649
Processing and microstructural study of surface laser remelted Al2O3–YSZ–YAG eutectic plates
650
Processing and microstructure characterization of ceria-doped yttria-stabilized zirconia powder and ceramics
651
Processing and microstructure characterization of porous corundum–spinel ceramics prepared by in situ decomposition pore-forming technique
652
Processing and microstructure control of (α2+B2+O) alloy sheet in Ti–Al–Nb system
653
Processing and microstructure of functionally graded W/Cu composites fabricated by multi-billet extrusion using mechanically alloyed powders
654
Processing and microstructure of metal matrix composites prepared by pressureless Ti-activated infiltration using Fe-base and Ni-base alloys
655
Processing and microstructure of metal matrix composites prepared by pressureless Ti-activated infiltration using Fe-base and Ni-base alloys
656
Processing and microstructure of Nano-Mo/Al2O3 composites from MOCVD and fluidized bed
657
Processing and microstructure of PCL/clay nanocomposites
658
Processing and microstructure of submicron WC–Co particulate reinforced Cu matrix composites prepared by direct laser sintering
659
Processing and microstructure of TiNi SMA strips prepared by cold roll-bonding and annealing of multilayer
660
Processing and microstructure of γ-LiAlO2 ceramics
661
Processing and modeling of conductive thermoplastic/carbon nanotube films for strain sensing
662
Processing and nutritional characteristics of value added ostrich products
663
Processing and nutritive evaluation of broiler litter as livestock feed
664
Processing and operating experience of Ni3Al-based intermetallic alloy IC–221M
665
Processing and operating experience of Ni3Al-based intermetallic alloy IC–221M
666
Processing and oxygen permeability of asymmetric ferrite-based ceramic membranes
667
Processing and oxygen permeation studies of asymmetric multilayer Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes
668
Processing and performance of a novel cathode material
669
Processing and performance of bridge deck subcomponents using two schemes of resin infusion
670
Processing and performance of nanophased braided carbon/epoxy composites
671
Processing and performance of Nicalon/Blackglas and Nextel/Blackglas using cure-on-the-fly filament winding and preceramic polymer pyrolysis with inactive fillers
672
Processing and performance of solid oxide fuel cell with Gd-doped ceria electrolyte
673
Processing and phase evolution in low voltage varistor prepared by chemical processing
674
Processing and phase separation of LSMO-based multiferroic composite ceramics
675
Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3
676
Processing and photoluminescence properties of surface crystallized ZnO glass-ceramics
677
Processing and physical properties of Al2O3/aluminum alloy composites
678
Processing and piezoelectric properties of porous PZT ceramics
679
Processing and preparation costs for rice and coarse grains in urban Mali: Subjecting an Ipse Dixit to empirical scrutiny
680
Processing and preparation of polymer and organic solar cells
681
Processing and presentation of antigens by dendritic cells: implications for vaccines
682
Processing and presentation of tumor antigens and vaccination strategies
683
Processing and properties of (1 − x)Pb(Mg1/3Nb2/3)O3·xPbTiO3 solid solutions from PbO- and MgO-excess compositions
684
Processing and properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 thick films
685
Processing and properties of 2D-Cf/SiC composites incorporating SiC fillers
686
Processing and properties of a glass-ceramic from coal fly ash from a thermal power plant through an economic process
687
Processing and properties of a mica–apatite glass–ceramic reinforced with Y-PSZ particles
688
Processing and properties of Al2O3 nanocomposites reinforced with sub-micron Ni and NiAl2O4
689
Processing and properties of Al2O3 nanocomposites reinforced with sub-micron Ni and NiAl2O4
690
Processing and properties of Al-based powder suspension/slurry: A comparison study of aqueous binder systems, stability and film uniformity
691
Processing and properties of aligned multi-walled carbon nanotube/aluminoborosilicate glass composites made by sol–gel processing Original Research Article
692
Processing and properties of alumina–carbon nano fibre ceramic composites using standard ceramic technology
693
Processing and properties of an all-oxide composite with a porous matrix
694
Processing and properties of biphasic calcium phosphates bioceramics obtained by pressureless sintering and hot isostatic pressing
695
Processing and properties of bone-analogue biodegradable and bioinert polymeric composites
696
Processing and properties of bone-analogue biodegradable and bioinert polymeric composites
697
Processing and properties of BST thin films for tunable microwave devices
698
Processing and properties of C/Si–B–C–N fiber–reinforced ceramic matrix composites prepared by precursor impregnation and pyrolysis Original Research Article
699
Processing and properties of CaCu3Ti4O12 ceramics Original Research Article
700
Processing and properties of carbon nanotubes reinforced aluminum composites
701
Processing and properties of carbon nanotubes-nano-WC-Co composites
702
Processing and properties of carbon nanotubes-nano-WC-Co composites
703
Processing and properties of carbon nanotubes-nano-WC-Co composites
704
Processing and properties of C–Mn steel with dual-phase microstructure
705
Processing and properties of cobalt-substituted lithium ferrite in the GHz frequency range
706
Processing and properties of copper dispersed alumina matrix nanocomposites
707
Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites
708
Processing and properties of extruded starch/polymer foams
709
Processing and properties of ferroelectric (Bi, La)4(Ti, Ge)3O12 thin films by chemical solution deposition
710
Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering
711
Processing and properties of gluten/zein composite
712
Processing and properties of large grain (RE)BCO
713
Processing and properties of large grain (RE)BCO
714
Processing and properties of Mg–6Gd–1Zn–0.6Zr: Part 1 – Recrystallisation and texture development
715
Processing and properties of Mg–6Gd–1Zn–0.6Zr: Part 2. Mechanical properties and particle twin interactions
716
Processing and properties of MoSi2–SiC and MoSi2–Al2O3
717
Processing and properties of MoSi2–SiC and MoSi2–Al2O3
718
Processing and properties of MWNT/HDPE composites Original Research Article
719
Processing and Properties of Nanocomposites
720
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying
721
Processing and properties of nanocrystalline Ni and NiO catalysts
722
Processing and properties of nanophase non-oxide ceramics
723
Processing and properties of nanophase non-oxide ceramics
724
Processing and properties of nanophase SiC/Si3N4 composites
725
Processing and properties of nanoporous hydroxyapatite ceramics
726
PROCESSING AND PROPERTIES OF NOVEL REINFORCED POLYMER BLENDS MADE OF POLYMERS AND LOW-MELTING GLASS
727
Processing and properties of particulate reinforced steel matrix composites
728
Processing and properties of particulate reinforced steel matrix composites
729
Processing and properties of Pb(Mg1/3Nb2/3)O3–PbTiO3-based ceramics
730
Processing and properties of PMMN–PZT quaternary piezoelectric ceramics for ultrasonic motors
731
Processing and properties of poly(methyl methacrylate)/carbon nano fiber composites
732
Processing and properties of poly(methyl methacrylate)/carbon nanofiber composites
733
Processing and properties of polyethylene reinforced by graphene nanosheets and carbon nanotubes
734
Processing and properties of polymer composites containing aligned functionalized carbon nanofibers Original Research Article
735
Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates
736
Processing and properties of porous piezoelectric materials with high hydrostatic figures of merit
737
Processing and properties of porous poly( -lactide)/bioactive glass composites
738
Processing and properties of porous titanium using space holder technique
739
Processing and properties of pressable ceramic with non-uniform reinforcement for selective-toughening
740
Processing and properties of SiC particulate reinforced Al6.2Zn2.5Mg1.7Cu alloy (7010) matrix composites prepared by mechanical alloying
741
Processing and properties of SiC particulate reinforced Al6.2Zn2.5Mg1.7Cu alloy (7010) matrix composites prepared by mechanical alloying
742
Processing and properties of silicon carbide and its composites containing MoSi2 and ZrB2
743
Processing and properties of sintered reaction-bonded silicon nitride with Y2O3–MgSiN2: Effects of Si powder and Li2O addition Original Research Article
744
Processing and properties of sol gel derived alumina–carbon nano tube composites
745
Processing and properties of the ceramic conductive multilayer device solid oxide fuel cell (SOFC)
746
Processing and properties of titanium–titanium boride (TiBw) matrix composites—a review
747
Processing and properties of transparent hydroxyapatite and β tricalcium phosphate obtained by HIP process
748
Processing and properties of ultrafine-grain aluminium alloy 6111 sheet
749
Processing and properties of ultrafine-grain aluminum alloy 5005 sheet
750
Processing and properties of ultra-high temperature ceramics for space applications
751
Processing and properties of ultrahigh-carbon (1.6%C) steel
752
Processing and properties of unidirectional SiO2f/SiO2 composites
753
Processing and properties of vanadium doped strontium niobate
754
Processing and properties of zirconium diboride-based composites
755
Processing and quality characteristics of apple slices processed under simultaneous infrared dry-blanching and dehydration with intermittent heating Original Research Article
756
Processing and quality characteristics of apple slices under simultaneous infrared dry-blanching and dehydration with continuous heating Original Research Article
757
Processing and recall of seductive details in scientific text
758
Processing and recombination lifetime characterization of silicon microstrip detectors
759
Processing and recombination lifetime characterization of silicon microstrip detectors
760
Processing and reliability of CSPs with underfill
761
Processing and routage of HIV glycoproteins by furin to the cell surface
762
Processing and sensory characteristics of cooked roast beef: effect of breed, age, gender and storage conditions
763
Processing and size effects on the optical properties of sputtered oxide thin films
764
Processing and Spark Plasma Sintering of zirconia/titanium cermets
765
Processing and storage of lye-treated carrots fermented by a mixed starter culture
766
Processing and structural evolution of nanocrystalline CuCeO2−x catalysts
767
Processing and structural evolution of nanocrystalline CuCeO2−x catalysts
768
Processing and structural properties of random oriented lead lanthanum zirconate titanate thin films
769
Processing and structures of bi-phase oxide ceramic filaments
770
Processing and study of dielectric and ferroelectric nature of BiFeO3 modified SrBi2Nb2O9
771
Processing and subcellular localization of ADAM2 in the Macaca fascicularis testis and sperm
772
Processing and tensile properties of hydroxyapatite-whisker-reinforced polyetheretherketone
773
Processing and thermal properties of an Mo5Si3C–SiC ceramic
774
Processing and thermal, mechanical and morphological characterization of post-consumer polyolefins/thermoplastic starch blends
775
Processing and transplanting cord-blood cells
776
Processing and Transport of the Precursor of Cathepsin C during Its Transfer into Lysosomes
777
Processing and Transport of the Precursor of Cathepsin C during Its Transfer into Lysosomes
778
Processing and ultraviolet patterning of LiNbO3 epitaxial films from metallorganic precursors
779
Processing and ultraviolet patterning of LiNbO3 epitaxial films from metallorganic precursors
780
Processing and visualization for diffusion tensor MRI
781
Processing assays of size fractions from sieve and cyclosizer analyses
782
Processing behavior of nanocrystalline NiAl during milling, sintering and mechanical loading and interpretation of its intergranular fracture
783
Processing bias in anxious subjects andrepressors,measured by emotional Stroop interferenceandattentional allocation
784
Processing biological gender and number information during Chinese pronoun resolution: ERP evidence for functional differentiation
785
Processing biomass in conventional oil refineries: Production of high quality diesel by hydrotreating vegetable oils in heavy vacuum oil mixtures Original Research Article
786
Processing biomass-derived oxygenates in the oil refinery: Catalytic cracking (FCC) reaction pathways and role of catalyst
787
Processing blackcurrants dramatically reduces the content and does not enhance the urinary yield of anthocyanins in human subjects
788
Processing by both classical and mechanosynthesis routes and characterization of a new solid solution of tungsten–bronze structure ceramics
789
Processing by equal-channel angular pressing: Applications to grain boundary engineering
790
Processing by mechanosynthesis and properties of piezoelectric Pb(Mg1/3Nb2/3)O3–PbTiO3 with different compositions
791
Processing by mechanosynthesis and properties of piezoelectric Pb(Mg1/3Nb2/3)O3–PbTiO3 with different compositions Original Research Article
792
Processing by tape casting and mechanical behaviour of aluminous cement-based matrix alumina fibers composites
793
Processing Camera-Based Documents Advances in Document Engineering
794
Processing Capability of Apatite-Mullite Glass-Ceramic Materials for the Production of Dental Restorations
795
Processing Capability of Apatite-Mullite Glass-Ceramic Materials for the Production of Dental Restorations
796
Processing centres in artisanal gold mining
797
Processing cereal straws by steam explosion in a pilot plant to enhance digestibility in ruminants
798
Processing Challenges and Opportunities of Camel Dairy Products
799
Processing characteristic and radiation resistance of various epoxy insulation materials for superconducting magnets
800
Processing characteristics and parameters in capacitor discharge sintering
801
Processing characteristics and thermal stabilities of gel and sol of epoxidized natural rubber
802
Processing characteristics of beef roasts made from high and normal pH bull inside rounds
803
Processing cherries (Prunus avium) using supercritical fluid technology. Part 1: Recovery of extract fractions rich in bioactive compounds
804
Processing cherries (Prunus avium) using supercritical fluid technology. Part 2. Evaluation of SCF extracts as promising natural chemotherapeutical agents
805
Processing companiesʹ preferences for attributes of beef in Switzerland
806
Processing condition influence on the characteristics of gold nanoparticles produced by pulsed laser ablation in liquids
807
Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives
808
Processing conditions and microstructural features of porous 316L stainless steel components by DMLS
809
Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering
810
Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys
811
Processing considerations with plasma immersion ion implantation
812
Processing contaminated soils and sediments by high power ultrasound
813
Processing controlled PROs in Spanish
814
Processing Coordinated Structures in Context: The Effect of Topic-Structure on Ambiguity Resolution
815
Processing copper–carbon nanotube composite powders by high energy milling
816
Processing copper–vanadium precipitate formed from crude TiCl4 in titania and titanium sponge production
817
Processing cotton gin trash to enhance in vitro dry matter digestibility in reduced time
818
Processing count queries over event streams at multiple time granularities
819
Processing data from scanning gauges on industrial web processes
820
Processing date kernels for iron (III) and chromium (VI) adsorption from water
821
Processing defects and their relevance to strength in alumina ceramics made by slip casting
822
Processing defects in ceramic powders and powder compacts
823
Processing defects in hot extrusion reaction synthesis
824
Processing defects in hot extrusion reaction synthesis
825
Processing demands upon cognitive, linguistic, and articulatory functions promote grey matter plasticity in the adult multilingual brain: Insights from simultaneous interpreters
826
Processing dependence of surface morphology in condensation cured PDMS nanocomposites
827
Processing dependence of Youngʹs modulus of Ti-base nanostructured alloys
828
Processing dependences of microstructure of ferroelectric thin films
829
Processing dependency of percolation threshold of MWCNTs in a thermoplastic elastomeric block copolymer
830
Processing dependent behavior of soft imprint lithography on the 1-10-nm scale
831
Processing Digital Image for Measurement of Crack Dimensions in Concrete
832
Processing discontinuous lexical items, by whatever name
833
Processing discontinuous lexical items: a reply to Frazier
834
Processing discourse roles in scripted narratives: The influences of context and world knowledge
835
Processing discrete data for deconvolution voltammetry based on the Fourier least-square method Original Research Article
836
Processing distributed mobile queries with interleaved remote mobile joins
837
Processing effect on microstructure and superconducting properties of sintered ReBa2Cu3Oy ceramics — the role of ionic radius
838
Processing effects during rotating membrane emulsification
839
Processing effects in aluminum micro-channel tube for brazed R744 heat exchangers
840
Processing effects on in-flight particle state and functional coating properties of plasma-sprayed manganese zinc ferrite
841
Processing effects on microstructure in Er and ErD2 thin-films
842
Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings
843
Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings
844
Processing effects on the microstructure and ferroelectric properties of Pb(Zr,Ti)O3 thin films prepared by sol–gel process
845
Processing effects on the stability of amorphous indium gallium zinc oxide thin-film transistors
846
Processing effects on the thermo-physical properties of carbon nanotube polyethylene composite
847
Processing elided verb phrases with flawed antecedents: The recycling hypothesis
848
Processing filler-gap dependencies in a head-final language
849
Processing fluency of the forms and sounds of Chinese characters
850
Processing focus structure and implicit prosody during reading: Differential ERP effects
851
Processing for optically active erbium in silicon by film co-deposition and ion-beam mixing
852
Processing games with restricted capacities
853
Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils
854
Processing gas chromatographic data and confidence interval calculation for partition coefficients determined by the phase ratio variation method
855
Processing generalized k-nearest neighbor queries on a wireless broadcast stream
856
Processing glass–pyrochlore composites for nuclear waste encapsulation
857
Processing hexane–oil miscella using a nonporous polymeric composite membrane Original Research Article
858
Processing highly tritiated water desorbed from molecular sieve bed using PERMCAT
859
Processing Huge Graphs with Stxxl
860
Processing Hyperion and ALI for forest classification
861
Processing impairments in OCD: It is more than inhibition!
862
Processing in transgenic Arabidopsis thaliana plants of polyproteins with linker peptide variants derived from the Impatiens balsamina antimicrobial polyprotein precursor
863
Processing individual fuzzy attributes for fuzzy rule induction
864
Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes
865
Processing industries: valuable strategy for reducing rice losses
866
Processing inferences at the semantics/pragmatics frontier: Disjunctions and free choice
867
Processing Instruction Revisited in the Iranian EFL Context and the Moderating Role of Grammatical Sensitivity
868
Processing Instruction Revisited: Does it Lead to Superior Performance in Interpretation and Production?
869
Processing interactions between phonology and melody: Vowels sing but consonants speak
870
Processing JPEG-compressed images and documents
871
Processing k-skyband, constrained skyline, and group-by skyline queries on incomplete data
872
Processing Large-Scale Images on Ace16k Using Discrete Wavelet Transform
873
Processing load and the use of concrete representations and strategies for solving linear equations
874
Processing local transitions versus long-distance syntactic hierarchies
875
Processing map and hot working mechanisms in a P/M TiAl alloy composite with in situ carbide and silicide dispersions
876
Processing map and kinetic analysis for hot deformation of an as-cast AZ91D magnesium alloy
877
Processing map approach for surface defect prediction in the hot bar rolling
878
Processing map for hot working characteristics of a wrought 2205 duplex stainless steel
879
Processing map for hot working of Inconel 718 alloy
880
Processing map for hot working of spray formed and hot isostatically pressed Al–Li alloy (UL40)
881
Processing map of Al2O3 particulate reinforced Al alloy matrix composites
882
Processing maps and hot workability of Super304H austenitic heat-resistant stainless steel
883
Processing maps and microstructural evolution of isothermal compressed Al–Cu–Li alloy
884
Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950 °C
885
Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950 °C
886
Processing maps for hot deformation of a high-Mn TWIP steel: A comparative study of various criteria based on dynamic materials model
887
Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: Anisotropy of hot workability
888
Processing maps for hot deformation of the extruded 7075 aluminum alloy bar: Anisotropy of hot workability
889
Processing maps for hot working of 47Zr–45Ti–5Al–3V alloy
890
Processing maps for hot working of a P/M iron aluminide alloy
891
Processing maps for hot working of FeAl-based alloy
892
Processing maps for hot working of titanium alloys
893
Processing maps for hot working of titanium alloys
894
Processing maps for hot working of ZK60 magnesium alloy
895
Processing Maps for Use in Hot Working of Ductile Iron Original Research Article
896
Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models
897
Processing maps, microstructure evolution and deformation mechanisms of extruded AZ31-DMD during hot uniaxial compression
898
Processing materials with microwave energy
899
Processing materials with microwave energy
900
Processing memories of anger-eliciting events: The effect of asking ‘why’ from a distance
901
Processing method dependency of thermoelectric properties of Bi85Sb15 alloys in low temperature Original Research Article
902
Processing Method of Multi-Wavelength Pyrometer Data for Continuous Temperature Measurements
903
Processing Method of Night-Time Cloudiness for Astronomical Site Selection
904
Processing methods to control silk fibroin film biomaterial features
905
Processing microstructure property correlation of porous Ni–YSZ cermets anode for SOFC application
906
Processing microstructure property relationships in severely deformed tantalum
907
Processing mineral raw materials in Siberia: ores of molybdenum, tungsten, lead and gold
908
Processing morphological ambiguity: An experimental investigation of Russian numerical phrases
909
Processing multi-channel alumina membranes by tape casting latex-based suspensions
910
Processing municipal wastewaters by forward osmosis using CTA membrane
911
Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion
912
Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion
913
Processing nanoengineered scaffolds through electrospinning and mineralization suitable for biomimetic bone tissue engineering
914
Processing nanoparticles with A4F-SAXS for toxicological studies: Iron oxide in cell-based assays
915
Processing nanostructured materials: the need to integrate experimental data with multiscale continuum/non-continuum simulations
916
Processing naproxen with supercritical CO2
917
Processing negated sentences with contradictory predicates: Is a door that is not open mentally closed?
918
Processing network models for forest management
919
Processing network models of energy/environment systems
920
Processing networks with planned inventories: Tandem queues with feedback
921
Processing of a coal waste as a measure for savings of resources and power savings on Cherepovets Metallurgical Industrial complex of Open Society "Severstal"
922
Processing of a 22 kDa Precursor Protein to Produce the Circular Protein Tricyclon A
923
Processing of a bulk metallic glass forming alloy based on industrial grade Zr
924
Processing of a ferric anolyte produced by a copper electrowinning cell based on reactive electro dialysis
925
Processing of a low-carbon steel by equal-channel angular pressing Original Research Article
926
Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure
927
Processing of a multilayer bender type actuator
928
Processing of a natural hydroxyapatite powder: From powder optimization to porous bodies development
929
Processing of a new high strength high toughness steel with duplex microstructure (Ferrite + Austenite)
930
Processing of a Zimbabwean petalite to obtain lithium carbonate
931
Processing of AB-type carbonated hydroxyapatite Ca10−x(PO4)6−x(CO3)x(OH)2−x−2y(CO3)y ceramics with controlled composition
932
Processing of acidic proline-rich proprotein by human salivary gland convertase
933
Processing of advanced electroceramic components by fused deposition technique
934
Processing of advanced materials using high-energy mechanical milling
935
Processing of affective pictures modulates right-hemispheric gamma band EEG activity
936
Processing of affective prosody and lexical-semantics in spoken utterances as differentiated by event-related potentials
937
Processing of Affective Stimuli in Alcoholism
938
Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering
939
Processing of Al2O3 sheets by the gel–tape-casting process
940
Processing of Al2O3/SiC nanocomposites—part 1: aqueous colloidal processing
941
Processing of Al2O3/SiC nanocomposites—part 2: green body formation and sintering
942
Processing of Al2O3/Y-TZP laminates from water-based cast tapes
943
Processing of Alborz Markazi coal tailings using column flotation
944
Processing of alumina and zirconia nano-powders and compacts
945
Processing of alumina and zirconia nano-powders and compacts
946
Processing of alumina and zirconia nano-powders and compacts
947
Processing of alumina low-density xerogels by ambient pressure drying
948
Processing of alumina-coated tetragonal zirconia materials and their response to sliding wear
949
Processing of aluminium alloys by equal channel angular drawing at room temperature
950
Processing of aluminium alloys containing titanium addition by mechanical alloying
951
Processing of aluminium alloys containing titanium addition by mechanical alloying
952
Processing of amorphous Fe–W reinforced Fe matrix composites
953
Processing of amorphous Fe–W reinforced Fe matrix composites
954
Processing of an aqueous tape casting of mesocarbon microbeads for high-performance carbonaceous laminations Original Research Article
955
Processing of an ultrafine-grained titanium by high-pressure torsion: An evaluation of the wear properties with and without a TiN coating
956
Processing of arsenic waste by precipitation and solidification
957
Processing of ATG8s, Ubiquitin-Like Proteins, and Their Deconjugation by ATG4s Are Essential for Plant Autophagy
958
Processing of auditory stimuli during visual attention in patients with schizophrenia
959
Processing of autobiographical memory retrieval cues in borderline personality disorder
960
Processing of AZ31 magnesium alloy by a new noble severe plastic deformation method
961
Processing of banded magnetite quartzite (BMQ) ore using flotation techniques
962
Processing of barium titanate tapes with different binders for MLCC applications—Part I: Optimization using design of experiments
963
Processing of barium titanate tapes with different binders for MLCC applications—Part II: Comparison of the properties
964
Processing of barley and enzyme supplementation in diets for young pigs
965
Processing of basic speech acts following localized brain damage: A new light on the neuroanatomy of language
966
Processing of Bi1.5ZnNb1.5O7 ceramics for LTCC applications: Comparison of synthesis and sintering methods
967
Processing of binary images of handwritten text documents
968
Processing of biomorphic porous TiO2 ceramics by chemical vapor infiltration and reaction (CVI-R) technique
969
Processing of biomorphic Si3N4 ceramics by CVI-R technique with SiCl4/H2/N2 system
970
Processing of bitumens modified by a bio-oil-derived polyurethane
971
Processing of black liquors by UF/NF ceramic membranes Original Research Article
972
Processing of boric acid from borax by a wet chemical method
973
Processing of brass open-cell foam by silica-gel beads replication
974
Processing of buffer sheets for sintering of PLZT tapes
975
Processing of bulk nanostructured ceramics
976
Processing of carbide-derived carbon (CDC) using biomorphic porous titanium carbide ceramics
977
Processing of carbon composite paper as electrode for fuel cell
978
Processing of Carbon Disulfide at KRC for Safe Disposal
979
Processing of carbon nanotube reinforced silicon nitride composites by spark plasma sintering
980
Processing of carbon-fiber reinforced (SiC + ZrC) mini-composites by soft-solution approach and their characterization
981
Processing of Carcinoembryonic Antigen by Kupffer Cells: Recognition of a Penta-Peptide Sequence
982
Processing of cassava roots to remove cyanogens
983
Processing of cassava roots to remove cyanogens
984
Processing of cassava waste for improved biomass utilization
985
Processing of catalysts by atomic layer epitaxy: modification of supports
986
Processing of cellulose nanowhiskers/cellulose acetate butyrate nanocomposites using sol–gel process to facilitate dispersion
987
Processing of cellulose synthase (AcsAB) from Gluconacetobacter hansenii 23769
988
Processing of ceramic-metal interpenetrating composites
989
Processing of changes in visual speech in the human auditory cortex
990
Processing of chromium tungsten nitride hard coatings for glass molding
991
Processing of clustered DNA damage in human breast cancer cells MCF-7 with partial DNA-PKcs deficiency
992
Processing of coal fines in a water-only cyclone
993
Processing of coal mine gas with low methane concentrations for use in high-temperature fuel cells Original Research Article
994
Processing of color words activates color representations
995
Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature
996
Processing of complex sentences in a case of aphasia in Indonesian: thematic vs. linear strategies
997
Processing of complexly shaped multiply connected domains in finite element mesh generation
998
Processing of concretes with a high power CO2 laser
999
Processing of confidential information in distributed systems by fragmentation
1000
Processing of continuously reinforced Ti-alloy metal matrix composites (MMC) by magnetron sputtering
