ليست عنوان مقالات لاتين Fabrication and electrocatalytic application of functionalized nanoporous carbon material with different transition metal oxides Fabrication of an organic thin-film transistor by direct deposit of a pentacene layer onto a silicon substrate Original Research Article

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Fabrication and electrocatalytic application of functionalized nanoporous carbon material with different transition metal oxides

2

FABRICATION AND ELECTROCATALYTIC APPLICATION OF NI-MODIFIED ELECTRODE TOWARD DETECTION OF PARACETAMOL

3

Fabrication and electrochemical activity of Ni-attached carbon nanotube electrodes for hydrogen storage in alkali electrolyte

4

Fabrication and electrochemical behavior of a sol–gel-derived carbon ceramic composite electrode entrapping 2:18-molybdodiphosphate

5

Fabrication and Electrochemical Behavior of Monoclinic CuO and CuO/Graphite Composite Nanoparticles as Cathode in an Alkaline Zn-CuO Battery

6

Fabrication and electrochemical behavior of nitride fuel for future applications

7

Fabrication and electrochemical behavior of single-walled carbon nanotube/graphite-based electrode

8

Fabrication and electrochemical capacitance of polyaniline/titanium nitride core–shell nanowire arrays

9

Fabrication and electrochemical capacitance of polyaniline/titanium nitride core–shell nanowire arrays

10

Fabrication and electrochemical characteristics of all-solid-state lithium-ion rechargeable batteries composed of LiMn2O4 positive and V2O5 negative electrodes

11

Fabrication and electrochemical characterization of a vertical array of MnO2 nanowires grown on silicon substrates as a cathode material for lithium rechargeable batteries

12

Fabrication and electrochemical characterization of cobalt-based layered double hydroxide nanosheet thin-film electrodes

13

Fabrication and electrochemical characterization of electrostatic assembly of polyelectrolyte-functionalized ionic liquid and Prussian blue ultrathin films

14

Fabrication and electrochemical characterization of planar Pt–CGO microstructures Original Research Article

15

Fabrication and electrochemical characterization of PVC based electrodialysis heterogeneous ion exchange membranes filled with Fe3O4 nanoparticles

16

Fabrication and electrochemical characterization of tape cast BaCe0.5Zr0.3Y0.16Zn0.04O3 − δ electrode/electrolyte structures

17

Fabrication and electrochemical characterization of two-dimensional ordered nanoporous manganese oxide for supercapacitor applications

18

Fabrication and electrochemical performance of Poly (2,5-benzimidazole) (ABPBI)-based MEA by catalyst coated membrane (CCM) method for high-temperature polymer electrolyte fuel cells

19

Fabrication and electrochemical properties of an interdigitated array electrode in a microfabricated wall-jet cell

20

Fabrication and electrochemical properties of carbon nanotube film electrodes Original Research Article

21

Fabrication and electrochemical properties of carbon nanotube/polypyrrole composite film electrodes with controlled pore size

22

Fabrication and electrochemical properties of lithium-ion batteries for power tools

23

Fabrication and electrochemical properties of polyvinyl alcohol/poly(3,4-ethylenedioxythiophene) ultrafine fibers via electrospinning of EDOT monomers with subsequent in situ polymerization

24

Fabrication and electrochemical properties of three-dimensional net architectures of anatase TiO2 and spinel Li4Ti5O12 nanofibers

25

Fabrication and electrochemical property of Ag-doped SiO2 nanostructured ribbons

26

Fabrication and electrochemical sensing performance of a composite film containing a phosphovanadomolybdate and cobalt(II) tetrasulfonate phthalocyanine

27

Fabrication and electrochemistry study of multi-thiol coronary molecule monolayers

28

Fabrication and electrogenerated chemiluminescence properties of uniform octahedral 8-hydroxyquinoline zinc (Znq2)

29

Fabrication and electromagnetic characteristics of electromagnetic wave absorbing sandwich structures

30

Fabrication and electromagnetic characteristics of microwave absorbers containing carbon nanofibers and NiFe particles

31

Fabrication and electromagnetic characteristics of microwave absorbers containing PPY and carbonyl iron composite

32

Fabrication and electromagnetic interference shielding effectiveness of carbon nanotube reinforced carbon fiber/pyrolytic carbon composites

33

Fabrication and electromagnetic properties of soft-core functional particles by way of electroless Ni–Fe–P alloy plating on helical microorganism cells

34

Fabrication and electron field-emission of carbon nanofibers grown on silicon nanoporous pillar array

35

Fabrication and electroosmotic flow measurements in micro- and nanofluidic channels

36

Fabrication and EMI shielding effectiveness of Ag-decorated highly porous poly(vinyl alcohol)/Fe2O3 nanofibrous composites

37

Fabrication and emission properties of Er3+/Yb3+ codoped tellurite glass fiber for broadband optical amplification

38

Fabrication and erosion studies of C–SiC composite Jet Vanes in solid rocket motor exhaust

39

Fabrication and estimation of Au-coated Fe3O4 nanocomposite powders for the separation and purification of biomolecules

40

Fabrication and ethanol-sensing properties of micro gas sensor based on electrospun SnO2 nanofibers

41

Fabrication and evaluation of (PVA/HAp/PCL) bilayer composites as potential scaffolds for bone tissue regeneration application

42

Fabrication and evaluation of [Co(phen)2L]3+-modified DNA-MWCNT and SDS-MWCNT electrodes for electrochemical detection of 6-mercaptopurine

43

Fabrication and evaluation of 100 Ah cylindrical lithium ion battery for electric vehicle applications

44

Fabrication and evaluation of 450 F electrochemical redox supercapacitors using inexpensive and high-performance, polyaniline coated, stainless-steel electrodes

45

FABRICATION AND EVALUATION OF A MACHINE FOR SEPARATING FIBER FLAX

46

Fabrication and evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ co-impregnated yttria-stabilized zirconia anode for single-chamber solid oxide fuel cells

47

Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

48

Fabrication and evaluation of a passive alkaline membrane micro direct methanol fuel cell

49

Fabrication and evaluation of a ratchet type dielectrophoretic device for particle analysis

50

Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres

51

Fabrication and evaluation of actuators based on polymer electrolyte membranes

52

Fabrication and evaluation of auto-stripped tri-layer wound dressing for extensive burn injury

53

Fabrication and evaluation of biomimetic scaffolds by using collagen–alginate fibrillar gels for potential tissue engineering applications

54

Fabrication and evaluation of bioresorbable scaffolds for interventional cardiology application with sufficient drug release

55

Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing halloysite nanotubes

56

Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate

57

Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite

58

Fabrication and evaluation of chiral monolithic column modified by β-cyclodextrin derivatives

59

Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks

60

Fabrication and Evaluation of Electrical Properties of Poly(1,8-diaminonaphthalene) Based Schottky Diode.

61

Fabrication and evaluation of electrospun nanofibrous antimicrobial nylon 6 membranes

62

Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation

63

Fabrication and Evaluation of In Vitro Studies of Biodegradable and Antibacterial Composite Scaffolds Based on Polylactic Acid-Polycaprolactone- Hydroxyapatite Reinforced with Graphene and Zinc Oxide Nanoparticles for Use in Orthopedic Surgery

64

Fabrication and evaluation of inorganic–organic composite protonic conductors using inorganic sols as a dispersoid

65

Fabrication and evaluation of levofloxacin hemihydrate floating tablet

66

Fabrication and evaluation of low-cost agarose–zinc nanoporous composite matrix: Influence of adsorbent density and size distribution on the performance of expanded beds

67

Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites

68

Fabrication and evaluation of Nafion nanocomposite membrane based on ZrO2–TiO2 binary nanoparticles as fuel cell MEA

69

Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell

70

Fabrication and Evaluation of Physically Crosslinked Stimuli Sensitive Polymeric Blend of Pva-Gelatin as Drug Delivery System by Freeze Thaw Cycles

71

Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties

72

Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties

73

Fabrication and Evaluation of Pt/M (M= Co, Fe) Chitosan Supported Catalysts for Methanol Electrooxidation: Application in Direct Alcohol Fuel Cell

74

Fabrication and evaluation of Pt–Fe alloys as methanol tolerant cathode materials for direct methanol fuel cells

75

Fabrication and evaluation of PZT/Pt piezoelectric composites and functionally graded actuators

76

Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor

77

Fabrication and evaluation of single- and dual-channel (Π-design) microchip electrophoresis with electrochemical detection

78

Fabrication and Evaluation of Spironolactone‑Loaded Nanostructured Lipid Carries for Cardiac Tissue Regeneration

79

Fabrication and evaluation of stable micro tubular solid oxide fuel cells with BZCY-BZY bi-layer proton conducting electrolytes

80

Fabrication and evaluation of temperature responsive molecularly imprinted sorbents based on surface of yeast via surface-initiated AGET ATRP

81

Fabrication and evaluation of the novel reduction-sensitive starch nanoparticles for controlled drug release

82

Fabrication and evaluation of the regenerative effect of a polycaprolactone/chitosan nanofibrous scaffold containing bentonite nanoparticles in a rat model of deep second-degree burn injury

83

Fabrication and evaluation of tissue engineering vascular scaffolds based on biodegradable aliphatic–aromatic copolyesters

84

Fabrication and evaluation of variable focus X-ray lenses

85

Fabrication and evaluation of variable focus X-ray lenses

86

Fabrication and evaluation of Zn containing fluoridated hydroxyapatite layer with Zn release ability

87

Fabrication and evolution of catalyst-coated membranes by direct spray deposition of catalyst ink onto Nafion membrane at high temperature

88

Fabrication and evolution of Cu nanoparticles in Al2O3 crystal by ion implantation and annealing at different atmospheres

89

Fabrication and excellent conductive performance of antimony-doped tin oxide-coated diatomite with porous structure

90

Fabrication and excitonic properties of Zn0.69Cd0.23Mn0.08Se/ZnSe quantum wires

91

Fabrication and experiment of a hydro-pneumatic semi-active resettable device

92

Fabrication and field emission characteristics of SnO2 electron sources based on planar-gate-type cathode arrays

93

Fabrication and field emission properties of boron nanowire bundles

94

Fabrication and field emission properties of boron nanowire bundles

95

Fabrication and field emission properties of multi-walled carbon nanotube/silicon nanowire array Original Research Article

96

Fabrication and flexural properties of Tyranno-SA/SiC composites with carbon interlayer by CVI

97

Fabrication and fluidic characterization of silicon micropillar array electrospray ionization chip

98

Fabrication and fluorescent labeling of guar gum nanoparticles in a surfactant free aqueous environment

99

Fabrication and formaldehyde gas-sensing property of ZnO–MnO2 coplanar gas sensor arrays

100

Fabrication and formation of bioactive anodic zirconium oxide nanotubes containing presynthesized hydroxyapatite via alternative immersion method

101

Fabrication and full characterization of state-of-the-art quantum dot luminescent solar concentrators

102

Fabrication and gain performance of Er3+/Yb3+-codoped tellurite glass fiber

103

Fabrication and gas sensing characteristics of pure and Pt-doped γ-Fe2O3 thin film

104

Fabrication and gas sensing performance of parallel assemblies of metal oxide nanotubes supported by porous aluminum oxide membranes

105

Fabrication and gas sensing properties of C-doped and un-doped TiO2 nanotubes

106

Fabrication and gas sensing properties of α-Fe2O3 thin film prepared by plasma enhanced chemical vapor deposition (PECVD)

107

Fabrication and gas sensitivity of polyaniline–titanium dioxide nanocomposite thin film

108

Fabrication and gas separation properties of polybenzimidazole (PBI)/nanoporous silicates hybrid membranes

109

Fabrication and gas transport properties of SWNT/polyacrylic nanocomposite membranes

110

Fabrication and gas-sensing properties of hierarchically porous ZnO architectures

111

Fabrication and geometrical factors of a novel piezoelectric composite

112

Fabrication and growth mechanism of carbon nanospheres by chemical vapor deposition

113

Fabrication and handling aspects of highly reactive powders

114

Fabrication and hard X-ray photoemission analysis of photocathodes with sharp solar-blind sensitivity using AlGaN films grown on Si substrates

115

Fabrication and hemocompatibility of cell outer membrane mimetic surfaces on chitosan by layer by layer assembly with polyanion bearing phosphorylcholine groups

116

Fabrication and high heat flux test of large mockups for ITER first wall semi-prototype

117

Fabrication and high heat flux test of the first wall mock-ups for the Korean He Cooled Test Blanket (KO HCML TBM)

118

Fabrication and high heat flux test with the first wall mockups for developing the KO TBM

119

Fabrication and high temperature oxidation resistance of ZrO2/Al2O3 micro-laminated coatings on stainless steel

120

Fabrication and high temperature thermoelectric properties of c-axis oriented Na0.68CoO:Ag nanocomposite thin films

121

Fabrication and high-temperature corrosion of sol–gel Mn/Co oxide spinel coating on AISI 430

122

Fabrication and humidity sensing properties of nanostructured TiO2–SnO2 thin films

123

Fabrication and hydrogen sorption behaviour of nanoparticulate MgH2 incorporated in a porous carbon host

124

Fabrication and icing property of superhydrophilic and superhydrophobic aluminum surfaces derived from anodizing aluminum foil in a sodium chloride aqueous solution

125

Fabrication and impedance studies of DMFC anode incorporated with CNT-supported high-metal-content electrocatalyst

126

Fabrication and implementation of large-area organic light-emitting-diode devices on direct patterned backplanes

127

Fabrication and improvement of the density of Li2TiO3 pebbles by the optimization of a sol–gel method

128

Fabrication and in vitro biocompatibility of biomorphic PLGA/nHA composite scaffolds for bone tissue engineering

129

Fabrication and in vitro characterization of magnetic hydroxycarbonate apatite coatings with hierarchically porous structures

130

Fabrication and in vitro drug release study of microsphere drug delivery systems based on amphiphilic poly-α,β-[N-(2-hydroxyethyl)-l-aspartamide]-g-poly(l-lactide) graft copolymers

131

Fabrication and In Vitro Evaluation of A Chondroitin Sulphate-Polycaprolactone Composite Nanofibrous Scaffold for Potential Use in Dermal Tissue Engineering

132

Fabrication and in vitro evaluation of a sponge-like bioactive-glass/gelatin composite scaffold for bone tissue engineering

133

Fabrication and in vitro evaluation of the collagen/hyaluronic acid PEM coating crosslinked with functionalized RGD peptide on titanium

134

Fabrication and infiltration kinetics analysis of Ti-coated diamond/copper composites with near-net-shape by pressureless infiltration

135

Fabrication and installation of equilibrium field coils for the JT-60SA

136

Fabrication and installation of KSTAR in-vessel control coils

137

Fabrication and integration of metal oxide nanowire sensors using dielectrophoretic assembly and improved post-assembly processing

138

Fabrication and interfacial structure of Al2O3/Ni laminar ceramics

139

Fabrication and Investigation of 3D Scaffold Using Hydroxyapatite and Gelatin Nanoparticles for Bone Cancer Treatment with Sufficient Chemical Stability

140

Fabrication and investigation of electrochemical characterization of Ba based cathodes

141

Fabrication and investigation of electrochromatographic columns with a simplex configuration

142

Fabrication and investigation of nanocomposites of conducting polymers and GaSb nanocrystals

143

Fabrication and investigation of PDMS micro-diffuser/nozzle

144

Fabrication and Investigation of SeGe GlassCeramics in the Presence of Ga and Sn Additives

145

Fabrication and investigation of SiO2 supported sulfated zirconia/Nafion® self-humidifying membrane for proton exchange membrane fuel cell applications

146

Fabrication and Investigation on Luminescence Properties of Bi2WO6 Microfibers via Stretching Process

147

Fabrication and In-vitro Evaluation of Buccal Mucoadhesive Tablet of Meloxicam

148

Fabrication and in-vitro Evaluation of Ketotifen Fumarate-loaded PLGA Nanoparticles as a Sustained Delivery System

149

Fabrication and ionic conductivity of amorphous Li–Al–Ti–P–O thin film

150

Fabrication and ionic conductivity of amorphous lithium meta-silicate thin film

151

Fabrication and ionic conductivity of Li2SiO3 thin film

152

Fabrication and its characteristics of metal-loaded TiO2/SnO2 thick-film gas sensor for detecting dichloromethane

153

Fabrication and kinetic studies of a novel silver nanoparticles–glucose oxidase bioconjugate Original Research Article

154

Fabrication and laser behaviors of Nd:YAG ceramic microchips

155

Fabrication and Life Prediction of SSiC Ceramic Joint Joined with Silicon Resin YR3370

156

Fabrication and liquefied petroleum gas (LPG) sensing performance of p-polyaniline/n-PbS heterojunction at room temperature

157

Fabrication and liquid–solid, two-phase erosion wear behaviour of β-Sialon ceramic from pyrophyllite by carbothermal reduction and nitridation

158

Fabrication and lithium electrochemistry of InSe thin film

159

Fabrication and luminance switching of flexible organic bistable light-emitting diodes on flexible substrate

160

Fabrication and luminescence properties of Al2O3:Tb3+ microspheres via a microwave solvothermal route

161

Fabrication and Luminescence Properties of Ca2Gd8 (SiO4)6O2: Er3+ Phosphors via Sol-Gel Process

162

Fabrication and luminescence properties of Dy3+ doped CaMoO4 powders

163

Fabrication and luminescence properties of Er3+ doped yttrium lanthanum oxide transparent ceramics

164

Fabrication and luminescence properties of one-dimensional ZnAl2O4 and ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers by electrospinning method

165

Fabrication and luminescent properties of artificial luminous gem

166

Fabrication and luminescent properties of red phosphor M3BO6:Eu3+(M=La, Y)

167

Fabrication and luminescent properties of the core–shell structured YNbO4:Eu3+/Tb3+@SiO2 spherical particles

168

Fabrication and magnetic behavior of chemical deposited Ni–P nanowire and nanotube arrays

169

Fabrication and magnetic behaviour of Co film with ordered nanodot arrays

170

Fabrication and magnetic properties of Al2O3/Co nanocomposites

171

Fabrication and magnetic properties of amorphous Co0.71Pt0.29 nanowire arrays

172

Fabrication and magnetic properties of cobalt nanorod arrays containing a number of ultrafine nanowires electrodeposited within an AAO/SBA-15 template

173

Fabrication and magnetic properties of cobalt-dispersed-alumina composites

174

Fabrication and magnetic properties of Cu50(Fe69Si10B16C5)50 thin microwires

175

Fabrication and magnetic properties of Fe3O4 octahedra

176

Fabrication and magnetic properties of Fe–Pd nanowire arrays

177

Fabrication and Magnetic Properties of Highly Oriented ZnO : Eu Films by Sol-Gel Process

178

Fabrication and magnetic properties of NiFe2O4 nanocrystalline nanotubes

179

Fabrication and magnetic properties of ordered 20 nm Co–Pb nanowire arrays

180

Fabrication and magnetic properties of ordered Fe60Pb40 nanowire arrays electrodeposited in AAO templates

181

Fabrication and magnetic properties of Polyimide/Nickel Oxide nanocomposite

182

Fabrication and magnetic property of binary Co–Ni nanowire array by alternating current electrodeposition

183

Fabrication and magnetoelectric effect of 1–3 type composites with microscale (K,Na)NbO3-based Pb-free piezoceramic pillars embedded in CoFe2O4-epoxy matrix

184

Fabrication and measurements of plastic scintillating fibers

185

Fabrication and measurements of plastic scintillating fibers

186

Fabrication and mechanical behavior of Al matrix composites reinforced with porous ceramic of in situ grown whisker framework

187

Fabrication and mechanical behavior of powder metallurgy processed in situ Nb/Al sheet metal–metal composites

188

Fabrication and mechanical behavior of powder metallurgy processed in situ Nb/Al sheet metal–metal composites

189

Fabrication and mechanical characterization of a series of plastic Zr-based bulk metallic glass matrix composites

190

Fabrication and mechanical characterization of carbon/SiC-epoxy nanocomposites

191

Fabrication and mechanical characterization of zirconium and gadolinium hydrides

192

Fabrication and mechanical evaluation of hydroxyapatite/oxide nano-composite materials

193

Fabrication and mechanical properties (strength and fracture toughness) of chilled aluminum alloy–glass particulate composite

194

Fabrication and mechanical properties (strength and fracture toughness) of chilled aluminum alloy–glass particulate composite

195

Fabrication and mechanical properties of a tungsten wire reinforced Cu–Zr–Al bulk metallic glass composite

196

Fabrication and mechanical properties of Al2O3/Ti(C0.7N0.3) nanocomposites

197

Fabrication and mechanical properties of Al2O3–Ni composite from two different powder mixtures

198

Fabrication and mechanical properties of Al2O3–Si3N4/ZrO2–Al2O3 laminated composites

199

Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles

200

Fabrication and mechanical properties of bulk nanocrystalline intermetallic Mg2Si

201

Fabrication and mechanical properties of calcium phosphate cements (CPC) for bone substitution

202

Fabrication and mechanical properties of carbon nanotube yarns spun from ultra-long multi-walled carbon nanotube arrays Original Research Article

203

Fabrication and mechanical properties of carbon short fiber reinforced barium aluminosilicate glass–ceramic matrix composites

204

Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete

205

Fabrication and Mechanical Properties of Continuously Graded WSi2–ZrO2(2Y) Materials Using Wet-Molding

206

Fabrication and mechanical properties of Cr2O3 solid solution ceramics in the system Cr2O3-Al2O3

207

Fabrication and mechanical properties of exfoliated clay–CNTs/epoxy nanocomposites

208

Fabrication and mechanical properties of functionally graded material by electrophoretic deposition

209

Fabrication and mechanical properties of homogeneous zirconia toughened alumina ceramics via cyclic solution infiltration and in situ precipitation

210

Fabrication and mechanical properties of in situ prepared mesocarbon microbead/carbon nanotube composites

211

Fabrication and mechanical properties of metal matrix composite with homogeneously dispersed ceramic particles

212

Fabrication and mechanical properties of monolithic MoSi2 by spark plasma sintering

213

Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites

214

Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites

215

Fabrication and mechanical properties of nanosized SiC particulate reinforced yttria stabilized zirconia composites

216

Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting

217

Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting

218

Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting

219

Fabrication and mechanical properties of PLA/HA composites: A study of in vitro degradation

220

Fabrication and Mechanical Properties of Porous Co-Cr-Mo Alloy Compacts without Ni Addition

221

Fabrication and mechanical properties of porous TiB2 ceramic

222

Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti2AlC particles

223

Fabrication and mechanical properties of quasicrystal-reinforced AlMnMm alloys

224

Fabrication and mechanical properties of short ZrO2 fiber reinforced NiFe2O4 matrix composites

225

Fabrication and mechanical properties of SiC reinforced reaction-bonded silicon nitride based ceramics

226

Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting

227

Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting

228

Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites

229

Fabrication and mechanical properties of SiO2 matrix composites reinforced by carbon nanotube

230

Fabrication and mechanical properties of SiO2–Al2O3–BNNPs and SiO2–Al2O3–BNNTs composites

231

Fabrication and mechanical properties of steel–steel composites

232

Fabrication and mechanical properties of steel–steel composites

233

Fabrication and mechanical properties of ultra-fine grained γ-Ni–20Fe/Al2O3 composites

234

Fabrication and mechanical properties of WC particulate reinforced Cu47Ti33Zr11Ni6Sn2Si1 bulk metallic glass matrix composites

235

Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy composites

236

Fabrication and mechanical properties of β-TCP pieces by gel-casting method

237

Fabrication and mechanical property prediction of carbon nanotube reinforced Aluminum nanocomposites

238

Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams

239

Fabrication and mechanism study of CuO layers on double surfaces of polyimide substrate using surface modification

240

Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing

241

Fabrication and metallization of 3D electrospun nanofiberous architecture with gold and silver coating for applications related to electrochemical supercapacitors

242

Fabrication and microscopic characterization of a single quantum-wire laser with high uniformity

243

Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium

244

Fabrication and microstructural characterization of nano-structured WC/Co coatings

245

Fabrication and microstructural characterization of porous SiC membrane supports with Al2O3–Y2O3 additives

246

Fabrication and microstructural characterization of porous silicon carbide with nano-sized powders

247

Fabrication and microstructure characterization of inert matrix fuel based on yttria stabilized zirconia

248

Fabrication and microstructure characterization of selective laser‐melted FeAl intermetallic parts

249

Fabrication and microstructure investigation of ultra-high-strength porcelain insulator

250

Fabrication and microstructure of a ZrO2–Ni functionally graded bonding interlayer using the airbrush spraying method Original Research Article

251

Fabrication and microstructure of boron-doped isotropic pyrolytic carbon Original Research Article

252

Fabrication and microstructure of cerium doped lutetium aluminum garnet (Ce:LuAG) transparent ceramics by solid-state reaction method

253

Fabrication and microstructure of directionally solidified SrCe1 − xYxO3 − δ (x = 0.1, 0.2) high temperature proton conductors

254

Fabrication and microstructure of Fe3Al matrix composite reinforced by carbon nanotube

255

Fabrication and microstructure of in situ toughened Al2O3/Fe3Al

256

Fabrication and microstructure of in situ vanadium carbide ceramic particulates-reinforced iron matrix composites

257

Fabrication and microstructure of the SrTiO3 composite membranes by Sol–Gel process

258

Fabrication and microwave absorbing properties of Li0.35Zn0.3Fe2.35O4 micro-belts/nickel-coated carbon fibers composites

259

Fabrication and microwave absorption properties of magnetite nanoparticle–carbon nanotube–hollow carbon fiber composites

260

Fabrication and microwave properties of hollow nickel spheres prepared by electroless plating and template corrosion method

261

Fabrication and microwave properties of Ni hollow powders by electroless plating and template removing method

262

Fabrication and modeling of high sensitivity humidity sensors based on doped silicon nanowires

263

Fabrication and modeling of nanocomposites with bioceramic nanoparticles for rapid wound healing: An experimental and molecular dynamics investigation

264

Fabrication and Modeling of Uniform-Waist Single-Mode Tapered Optical Fiber Sensors

265

Fabrication and modification of cellulose acetate based mixed matrix membrane: Gas separation and physical properties

266

Fabrication and Morphological Characterization of Hybrid Polymeric Solar Cells Based on P3HT and Inorganic Nanocrystal Blends

267

Fabrication and morphology control of BaWO4 thin films by microwave assisted chemical bath deposition

268

Fabrication and morphology control of electrospun poly(γ-glutamic acid) nanofibers for biomedical applications

269

Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ

270

Fabrication and nano structural study on La2O3-Co3O4-ZrO2 composite

271

Fabrication and nanoindentation properties of TiN/NiTi thin films and their applications in electrochemical sensing

272

Fabrication and nano-structure control of carbon aerogels via a microemulsion-templated sol–gel polymerization method Original Research Article

273

Fabrication and neuron cytocompatibility of iron oxide nanoparticles coated with silk-fibroin peptides

274

Fabrication and nonlinear optical properties of ultrathin films containing sulfonate functionalized fullerenes

275

Fabrication and operation of a 1 kW class anode-supported flat tubular SOFC stack

276

Fabrication and operation of a 6 kWe class interconnector-type anode-supported tubular solid oxide fuel cell stack

277

Fabrication and Operation of a Novel Membrane-less Microbial Fuel Cell as a Bioelectricity Generator

278

Fabrication and optical absorption of ordered indium oxide nanowire arrays embedded in anodic alumina membranes

279

Fabrication and optical characteristics of silicon-based two-dimensional photonic crystal Mach–Zehnder interferometers

280

Fabrication and optical characterization of a TiO2 thin film on a silica microsphere

281

Fabrication and optical characterization of electrospun poly(3-buthylthiophene) nanofibers

282

Fabrication and optical characterization of imaging fiber-based nanoarrays

283

Fabrication and optical characterization of Si nanowires formed by catalytic chemical etching in Ag2O/HF solution

284

Fabrication and optical characterization of template-constructed thin films with chiral nanostructure

285

Fabrication and optical characterization of template-constructed thin films with chiral nanostructure

286

Fabrication and Optical Characterization of Zinc Oxide Nanoparticles Prepared via a Simple Sol-gel Method

287

Fabrication and optical conductivities of strained epitaxial NaxCoO2 thin films: x=0.5, 0.7

288

Fabrication and optical properties of 3D composite photonic crystals of core–shell structures

289

Fabrication and optical properties of binary colloidal crystal monolayers consisting of micro- and nano-polystyrene spheres

290

Fabrication and optical properties of core–shell structured spherical SiO2@GdVO4:Eu3+ phosphors via sol–gel process

291

Fabrication and optical properties of Eu3+-doped ZnO nanospheres and nanorods

292

Fabrication and optical properties of GaAs/AlGaAs quantum dot grown in tetrahedral-shaped recesses on GaAs (1 1 1)B substrates by MOVPE

293

Fabrication and optical properties of highly ordered ZnO nanodot arrays

294

Fabrication and optical properties of large-scale uniform zinc oxide nanowire arrays by one-step electrochemical deposition technique

295

Fabrication and optical properties of porous InP structures

296

Fabrication and optical properties of silica shell photonic crystals

297

Fabrication and optical properties of SnS thin films by SILAR method

298

Fabrication and optical properties of transparent Nd3+:YAG nanoceramics

299

Fabrication and optical properties of Y2O3-based ceramics with broad emission bandwidth

300

Fabrication and Optical Properties Study of Poly(m-phenylene diamine)/ Sulfonated Single-walled Carbon Nanotubes Nanocomposite

301

Fabrication and optical property of single-crystalline InSb nanowire arrays

302

Fabrication and optical study of dye doped TiO2–SiO2 multilayer colloidal structures

303

Fabrication and optical waveguide of Sn-catalyzed CdSe microstructures

304

Fabrication and optimization of a fiber-optic radiation sensor for proton beam dosimetry

305

Fabrication and optimization of a fiber-optic radiation sensor for proton beam dosimetry

306

Fabrication and Optimization of Linear PEIModified Crystal Nanocellulose as an Efficient Non-Viral Vector for In-Vitro Gene Delivery

307

Fabrication and optimization of physicochemical properties of nano-phytosome from Punica granatum L. peel enriched polyphenol extract

308

Fabrication and optimization of single-junction nc-Si:H n–i–p solar cells using Si:H phase diagram concepts developed by real time spectroscopic ellipsometry

309

Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery

310

Fabrication and opto-electric properties of ITO/ZnO bilayer films on polyethersulfone substrates by ion beam-assisted evaporation

311

Fabrication and oxidation behavior of Cr2AlC coating on Ti6242 alloy

312

Fabrication and oxidation behavior of LaB6–ZrB2 composites

313

Fabrication and oxygen permeability of gastight, macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ capillaries for high temperature gas separation

314

Fabrication and percolation behaviour of novel porous conductive polyblends of polyaniline and poly(methyl methacrylate)

315

Fabrication and Performance Analysis of a Higher Efficient Dual-Axis Automated Solar Tracker

316

Fabrication and performance characteristics of a NiC multilayer grating for hard X-rays

317

Fabrication and performance evaluation for a novel small planar passive direct methanol fuel cell stack

318

Fabrication and performance evaluation of 3-cell SOFC stack based on planar 10 cm × 10 cm anode-supported cells

319

Fabrication and performance evaluation of electrolyte-combined α-LiAlO2 matrices for molten carbonate fuel cells

320

Fabrication and performance evaluation of highly sensitive hybrid sol–gel-derived oxygen sensor films based on a fluorinated precursor Original Research Article

321

Fabrication and Performance Evaluation of Integrated Solar-Driven Membrane Distillation System with Serpentine-shape of Flat Plate Solar Collector for Seawater Desalination

322

Fabrication and performance evaluation of planar solid oxide fuel cell with large active reaction area

323

Fabrication and performance investigation of 2-2 connectivity lead-free barium zirconate titanate–Portland cement composites

324

Fabrication and performance of a carbon dioxide-tolerant proton-conducting solid oxide fuel cells with a dual-layer electrolyte

325

Fabrication and performance of a new type of charged nanofiltration membrane based on polyelectrolyte complex

326

Fabrication and performance of advanced multi-layer SOFC cathodes

327

Fabrication and performance of Al2O3/(W,Ti)C + Al2O3/TiC multilayered ceramic cutting tools

328

Fabrication and performance of an advanced ceramic tool material

329

Fabrication and performance of anode-supported solid oxide fuel cells via slurry spin coating

330

Fabrication and performance of anode-supported YSZ films by slurry spin coating

331

Fabrication and performance of Ce0.85Sm0.15O1.925–Fe2O3 electrolytes in IT-SOFCs

332

Fabrication and performance of free-standing hydrogen gas sensors

333

Fabrication and performance of functionally graded cathodes for IT-SOFCs based on doped ceria electrolytes

334

Fabrication and performance of gadolinia-doped ceria-based intermediate-temperature solid oxide fuel cells

335

Fabrication and performance of GaN electronic devices

336

Fabrication and performance of multifilamentary Nb/sub 3/Sn wires by the cable-in-tube approach

337

Fabrication and performance of Ni/3 mol% Y2O3–ZrO2 cermet anodes for solid oxide fuel cells

338

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

339

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

340

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

341

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

342

Fabrication and performance of p–i–n CdTe radiation detectors

343

Fabrication and performance of p–i–n CdTe radiation detectors

344

Fabrication and performance of poly(methyl methacrylate) microfluidic chips with fiber cores

345

Fabrication and performance of polypyrrole (Ppy)/TiO2 heterojunction for room temperature operated LPG sensor

346

Fabrication and performance of Pt/C electrodes for low temperature H2/O2 fuel cells

347

FABRICATION AND PERFORMANCE STUDY OF A SOLAR MILK PASTEURIZER

348

FABRICATION AND PERFORMANCE STUDY OF SLOPE TYPE ELECTRIC CUM SOLAR OVEN

349

Fabrication and performance test of a catalyst-coated membrane from direct spray deposition

350

Fabrication and performance test of catalytic micro-combustors as a heat source of methanol steam reformer

351

Fabrication and performance test of contact-type liquid level sensor for measuring thickness variation of liquid lithium jet in the IFMIF/EVEDA lithium test loop

352

Fabrication and performance tests of a segmented p-type HPGe detector

353

Fabrication and performance tests of a segmented p-type HPGe detector

354

Fabrication and performances of an optical sensor system constructed by a novel Cu(I) complex embedded on silica matrix

355

Fabrication and performances of epoxy/multi-walled carbon nanotubes/piezoelectric ceramic composites as rigid piezo-damping materials

356

Fabrication and performances of microencapsulated paraffin composites with polymethylmethacrylate shell based on ultraviolet irradiation-initiated

357

Fabrication and performances of microencapsulated phase change materials based on n-octadecane core and resorcinol-modified melamine–formaldehyde shell

358

Fabrication and performances of new kind microencapsulated phase change material based on stearic acid core and polycarbonate shell

359

Fabrication and phase variation in annealed Cu3Se2 nanowire arrays

360

Fabrication and photoactivities of spherical-shaped BiVO4 photocatalysts through solution combustion synthesis method

361

Fabrication and photocatalysis of CuO/ZnO nano-composites via a new method

362

Fabrication and photocatalysis of mesoporous ZnWO4 with PAMAM as a template

363

Fabrication and photocatalysis of nanostructured TiO2 for solar hydrogen production

364

Fabrication and photocatalytic activities of ZnO arrays with different nanostructures

365

Fabrication and photocatalytic activity of a novel nanostructured TiO2 metal membrane Original Research Article

366

Fabrication and photocatalytic activity of electrospun nylon-6 nanofibers containing tourmaline and titanium dioxide nanoparticles

367

Fabrication and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst ZnTe/TiO2 nanotube arrays

368

Fabrication and photocatalytic activity of porous TiO2 nanowire microspheres by surfactant-mediated spray drying process

369

Fabrication and photocatalytic degradation of reactive blue 19 by CuWO4, Ag3PO4, and CuWO4-Ag3PO4 composites under visible light irradiation

370

Fabrication and photocatalytic properties of free-standing TiO2 nanotube membranes with through-hole morphology

371

Fabrication and photocatalytic properties of spheres-in-spheres ZnO/ZnAl2O4 composite hollow microspheres

372

Fabrication and photochromic study of titanate nanotubes loaded with silver nanoparticles

373

Fabrication and photoelectric properties of self-assembled bilayer lipid membranes on conducting glass

374

Fabrication and photoelectrochemical characterization of CdS particles in nanospaces of expandable mica

375

Fabrication and photoelectrochemical properties of La5Ti2MS5O7 (M = Ag, Cu) electrodes

376

Fabrication and photoelectrochemical properties of porous ZnWO4 film

377

Fabrication and photoelectrochemical study of Ag@TiO2 nanoparticle thin film electrode

378

Fabrication and photoluminescence characteristics of Er3+-doped optical fiber sensitized by Si particles

379

Fabrication and photoluminescence characteristics of nonuniform Yb-Er codoped films

380

Fabrication and photoluminescence characteristics of single crystalline In2O3 nanowires

381

Fabrication and photoluminescence of GaN/sapphire submicron-scale structures with nanometre scale resolution

382

Fabrication and photoluminescence of GaN/sapphire submicron-scale structures with nanometre scale resolution

383

Fabrication and photoluminescence of molecular hybrid films based on the complexes of 8-hydroxyquinoline with different metal ions via sol–gel process

384

Fabrication and photoluminescence properties of erbium doped size-controlled silicon nanocrystals

385

Fabrication and photoluminescence properties of silicon nanowires with thin surface oxide layers

386

Fabrication and photoluminescence studies of ZnO nanocrystals dispersed in glass films

387

Fabrication and photoluminescent characteristics of one-dimensional La2O2S:Eu3+ nanocrystals

388

Fabrication and photophysical properties of singlet oxygen generating nanoporous membrane

389

Fabrication and photophysical property of Tb(III), Dy(III) and Eu(III) complex LB films containing double functional ligand of long chain mono docosyl phthalate

390

Fabrication and photovoltaic properties of Cu2ZnSnS4/i-a-Si/n-a-Si thin film solar cells

391

Fabrication and photovoltaic properties of multilayered thin films designed by layer-by-layer assembly of poly(p-phenylenevinylene)s

392

Fabrication and photovoltaic properties of self-assembled sulfonated polyaniline/TiO2 nanocomposite ultrathin films

393

Fabrication and physical properties of conductive polyacrylonitrile-polyaniline derivative fibers

394

Fabrication and physical properties of EPDM–organoclay nanocomposites

395

Fabrication and physicochemical characterization of HPMC films with commercial plant extract: Influence of light and film composition

396

Fabrication and Physicochemical Investigation of Ancient Iranian and Pakistani Treated Silver Particles and their Comparison with Silver Nanoparticles

397

Fabrication and piezoelectricity of 0–3 cement based composite with nano-PZT powder

398

Fabrication and plasma resistance properties of transparent YAG ceramics

399

Fabrication and plastic deformation of Y-TZP/alumina nanocomposite ceramics containing oxynitride glass

400

Fabrication and positive temperature coefficient of resistivity properties of semiconducting ceramics based on the BaTiO3–(Bi1/2K1/2)TiO3 system

401

Fabrication and positron annihilation spectroscopy (PAS) characterization of cellulose triacetate membranes for forward osmosis

402

Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass

403

Fabrication and preliminary evaluation of metal matrix microencapsulated fuels

404

Fabrication and preliminary testing of a planar membraneless microchannel fuel cell

405

Fabrication and preliminary testing of regular microporous membranes manufactured by deep X-ray lithography at the VEPP-3 storage ring

406

Fabrication and process parameter optimization of a 3d printer using response surface methodology

407

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

408

Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices

409

Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices

410

Fabrication and properties analysis of Cf–CNT/SiC composite

411

Fabrication and properties of 3-D Cf/ZrB2–ZrC–SiC composites via polymer infiltration and pyrolysis

412

Fabrication and properties of 3-D Cf/ZrC–SiC composites by the vapor silicon infiltration process

413

Fabrication and properties of 3-D Cf/ZrC–SiC composites via in-situ reaction

414

Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery

415

Fabrication and properties of a novel ZnO/Cu composite

416

Fabrication and properties of a tin–lithium alloy

417

Fabrication and properties of acid blue 25 dye-intercalated layered double hydroxides film on an anodic alumina/aluminum substrate Original Research Article

418

Fabrication and properties of aluminumquinoline/oxadiazole heterostructure luminescent layers

419

Fabrication and properties of anode-supported solid oxide fuel cell

420

Fabrication and properties of anode-supported tubular solid oxide fuel cells

421

Fabrication and properties of As-doped ZnO films grown on GaAs(0 0 1) substrates by radio frequency (rf) magnetron sputtering

422

Fabrication and properties of Bi2S3−xSex thermoelectric polycrystals

423

Fabrication and properties of borazine derived boron nitride matrix wave-transparent composites reinforced by 2.5 dimensional fabric of Si–N–O fibers

424

Fabrication and properties of CaZr0.9In0.1O3−δ prepared by an auto-ignition combustion process

425

Fabrication and properties of ceramic coatings for CTR liquid blanket by sputtering method

426

Fabrication and properties of chitin/hydroxyapatite hybrid hydrogels as scaffold nano-materials

427

Fabrication and properties of composites from BST and polypropylene-graft-poly(styrene-stat-divinylbenzene)

428

Fabrication and properties of conductive conjugated polymers/silk fibroin composite fibers

429

Fabrication and properties of continuous unidirectional Mo fiber reinforced TiAl composites by slurry casting and vacuum hot pressing

430

Fabrication and properties of cordierite–mullite bonded porous SiC ceramics

431

Fabrication and properties of cross-linked sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane

432

Fabrication and properties of dispersed carbon nanotube–aluminum composites

433

Fabrication and properties of Fe3Al–Al2O3 graded coatings

434

Fabrication and properties of film-under-gate field emission arrays with SnO2 emitters for flat lamp

435

Fabrication and properties of functionally graded dental implant

436

Fabrication and properties of graded composite rods for biomedical applications

437

Fabrication and properties of high efficiency luminescent nanorods EuPO4·H2O by soft template method

438

Fabrication and properties of high-resistivity porous silicon carbide for SiC power device passivation

439

Fabrication and properties of high-resistivity porous silicon carbide for SiC power device passivation

440

Fabrication and properties of high-strength extruded brass using elemental mixture of Cu–40% Zn alloy powder and Mg particle

441

Fabrication and properties of hybrid membranes based on salts of heteropolyacid, zirconium phosphate and polyvinyl alcohol

442

Fabrication and properties of in situ synthesized particles reinforced aluminum matrix composites of Al–Zr–O–B system

443

Fabrication and properties of injectable β-tricalcium phosphate particles/fibrin gel composite scaffolds for bone tissue engineering

444

Fabrication and properties of inverse opal photonic crystal films of La-doped bismuth titanate Original Research Article

445

Fabrication and properties of La modified AZO powders via a gaseous penetration processing

446

Fabrication and properties of laminated Al2O3/TiC composites

447

Fabrication and properties of lead-free machinable brass with Ti additive by powder metallurgy

448

Fabrication and properties of Lotus-type porous nickel-free stainless steel for biomedical applications

449

Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution

450

Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites

451

Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites

452

Fabrication and properties of macroporous tin–cobalt alloy film electrodes for lithium-ion batteries

453

Fabrication and properties of magnetic particles with nanometer dimensions

454

Fabrication and properties of mechanically alloyed and Ni activated sintered W matrix composites reinforced with Y2O3 and TiB2 particles

455

Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys

456

Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys

457

Fabrication and properties of mechanically milled alumina/aluminum nanocomposites

458

Fabrication and properties of meso-macroporous electrodes screen-printed from mesoporous titania nanoparticles for dye-sensitized solar cells

459

Fabrication and properties of microcapsules and nanocapsules containing n-octadecane

460

Fabrication and properties of microencapsulated-paraffin/gypsum-matrix building materials for thermal energy storage

461

Fabrication and properties of Mn1.56Co0.96Ni0.48O4 free-standing ultrathin chips

462

Fabrication and properties of mullite fiber matrix porous ceramics by a TBA-based gel-casting process

463

Fabrication and properties of Na0.9K0.1NbO3 nanostructures by molten salt synthesis

464

Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique

465

Fabrication and properties of novel low-melting glasses in the ternary system ZnO–Sb2O3–P2O5

466

Fabrication and Properties of Overcoated Resorcinol-Formaldehyde Shells for OMEGA Experiments

467

Fabrication and properties of piezoelectric composites designed for process monitoring of cement hydration reaction

468

Fabrication and properties of PIP 3D Cf/ZrC–SiC composites

469

Fabrication and properties of PIT Nb-Al and Nb-Sn based superconductors

470

Fabrication and properties of plasma-sprayed Al2O3/TiO2 composite coatings: A role of nano-sized TiO2 addition

471

Fabrication and properties of PLT/PLZT/PLT structures obtained by RF magnetron sputtering

472

Fabrication and properties of poly(polyethylene glycol octadecyl ether methacrylate)

473

Fabrication and properties of poly(vinyl alcohol)-based polymer electrolyte membranes for direct methanol fuel cell applications

474

Fabrication and properties of porous C/SiC composites

475

Fabrication and properties of porous mullite ceramics from calcined carbonaceous kaolin and α-Al2O3

476

Fabrication and properties of porous NiTi shape memory alloys for heavy load-bearing medical applications

477

Fabrication and properties of porous scaffold of magnesium phosphate/polycaprolactone biocomposite for bone tissue engineering

478

Fabrication and properties of porous Si3N4–SiO2 ceramics with dense surface and gradient pore distribution

479

Fabrication and properties of porous β-tricalcium phosphate ceramics prepared using a double slip-casting method using slips with different viscosities

480

Fabrication and properties of reaction-formed SiC by infiltrating molten Si into mesocarbon microbeads-based carbon preform

481

Fabrication and properties of reactively hot pressed ZrB2–SiC ceramics

482

Fabrication and properties of self-assembled films of poly(thiophene) derivatives

483

Fabrication and properties of short carbon fibers reinforced copper matrix composites

484

Fabrication and properties of SiC/mullite composite porous ceramics

485

Fabrication and properties of SiCp/Al composites by pulsed electric current sintering

486

Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes

487

Fabrication and properties of supersonic plasma sprayed Al2O3 coating on porous Si3N4 substrate

488

Fabrication and properties of textured Bi-based cobaltite thermoelectric rods by zone melting

489

Fabrication and properties of the Nb doped Zr-rich lead zirconate titanate ceramics by a heterogenous precipitation method

490

Fabrication and properties of thermal insulating glass fiber reinforced composites from low temperature curable polyphosphate inorganic polymers

491

Fabrication and properties of thermal insulating glass fiber reinforced composites from low temperature curable polyphosphate inorganic polymers

492

Fabrication and properties of thin-shell monolithic piezoelectric ceramic transducers

493

Fabrication and properties of Ti(C,N) based cermets reinforced by nano-CBN particles

494

Fabrication and properties of TiC-based cermet with intra/intergranular microstructure

495

Fabrication and properties of titanium–hydroxyapatite nanocomposites

496

Fabrication and properties of transparent polymethylmethacrylate/cellulose nanocrystals composites

497

Fabrication and properties of trench-structured networked SnO2 nanowire gas sensors

498

Fabrication and properties of tricalcium phosphate/barium hexaferrite composites

499

Fabrication and properties of ultra highly porous silicon carbide by the gelation–freezing method

500

Fabrication and properties of ultrafiltration membranes composed of polysulfone and poly(1-vinylpyrrolidone) grafted silica nanoparticles

501

Fabrication and properties of vitreous silica films prepared by flame hydrolysis deposition

502

Fabrication and properties of W–20Cu alloy reinforced by titanium coated carbon fibers

503

Fabrication and properties of WC–10Co cemented carbide reinforced by multi-walled carbon nanotubes

504

Fabrication and properties of W–Cu alloy reinforced by multi-walled carbon nanotubes

505

Fabrication and properties of ZrB2–SiC–BN machinable ceramics

506

Fabrication and property of chitosan film carrying ethyl cellulose microspheres

507

Fabrication and property study of thin film transistor using rf sputtered ZnO as channel layer

508

Fabrication and purification of carbon nano onions

509

Fabrication and quantum properties of nanostructured silicon

510

Fabrication and reduction-sensitive behavior of polyion complex nano-micelles based on PEG-conjugated polymer containing disulfide bonds as a potential carrier of anti-tumor paclitaxel

511

Fabrication and reflection properties of silicon nanopillars by cesium chloride self-assembly and dry etching

512

Fabrication and release behavior of a novel freeze-gelled chitosan/γ-PGA scaffold as a carrier for rhBMP-2

513

Fabrication and residual stresses characterization of novel non-oxide multilayer ceramics

514

Fabrication and response of high concentration SIMPLE superheated droplet detectors with different liquids

515

Fabrication and Room-Temperature Single-Charging Behavior of Self-Aligned Single-Dot Memory Devices

516

Fabrication and scanning tunneling microscopy studies of the Si(1 1 1)-(√31 × √31)–In surface

517

Fabrication and scintillation properties of highly transparent Pr:LuAG ceramics using Sc,La-based isovalent sintering aids

518

Fabrication and sealing performance of rare-earth containing glass–ceramic seals for intermediate temperature solid oxide fuel cell applications

519

Fabrication and sensing behavior of PVF2 coated-polyaniline sensor for volatile organic compounds

520

Fabrication and shape-evolution of nanostructured TiO2 via a sol–solvothermal process based on benzene–water interfaces

521

Fabrication and simulation of GaSb thermophotovoltaic cells

522

Fabrication and simulation of novel ultra-thin 3D silicon detectors

523

Fabrication and simulation of novel ultra-thin 3D silicon detectors

524

Fabrication and Simulation Properties of [SiO2 - TiO2] / Silan-Cellulose Acetate Nanocomposite for Self-Clean Surfaces Applications

525

Fabrication and sintering characteristics of doctor blade YBCO-Ag tapes

526

Fabrication and soft-magnetic properties of Fe–B–Nb–Y glassy powder compacts by spark plasma sintering technique

527

Fabrication and some physical properties of AgIn5S8 thin films

528

Fabrication and some properties of textured alumina-related compounds by colloidal processing in high-magnetic field and sintering

529

Fabrication and sonocatalytic property of AgPO3 microsphere

530

Fabrication and sonocatalytic property of AgPO3 microsphere

531

Fabrication and spectroscopic properties of Langmuir–Blodgett films of novel zinc complexes with long chain mono (hexadecyl, octadecyl, eicosyl, and docosyl) phthalate

532

Fabrication and spectroscopy results of mercuric iodide Frisch collar detectors

533

Fabrication and spectroscopy results of mercuric iodide Frisch collar detectors

534

Fabrication and SPS microstructures of Ti–45Al–8.5Nb–(W,B,Y) alloying powders

535

Fabrication and stability of porous poly(allylamine) hydrochloride (PAH)/poly(acrylic acid) (PAA) multilayered films via a cleavable-polycation template

536

Fabrication and STM-characterization of novel hybrid materials of DNA/carbon nanotube

537

Fabrication and strain investigation of ZnO nanorods on Si composing sol–gel and chemical bath deposition method Original Research Article

538

Fabrication and structural analysis of aromatic polyimide ultra-thin films with different fluorine contents

539

Fabrication and structural analysis of three-dimensionally well-ordered arrangements of silicon oxycarbide microparticles

540

Fabrication and structural characterization of (Ba,Sr)TiO3 thin films produced by Electrostatic Spray Assisted Vapour Deposition

541

Fabrication and structural characterization of electro-spun polybenzimidazol-derived carbon nanofiber by graphitization

542

Fabrication and structural characterization of metal films coated on cenosphere particles by magnetron sputtering deposition

543

Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique

544

Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores

545

Fabrication and structural performance of periodic cellular metal sandwich structures

546

Fabrication and structural performance of periodic cellular metal sandwich structures

547

Fabrication and structural properties of porous Cu–YSZ cermets for solid oxide fuel cells

548

Fabrication and structural, electrical characterization of i-ZnO/n-ZnO nanorod homojunctions

549

Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites

550

Fabrication and Study of Mechanical Properties of Orange PEEL Reinforced Polymer Composite

551

Fabrication and study of photovoltaic material CuInxGa1−xSe2 bulk and thin films obtained by the technique of close-spaced vapor transport

552

Fabrication and study of pipe-gridded porous metal

553

Fabrication and study of structural, optical and electrical properties of UV curable conductive polyurethane acrylate films containing polyaniline-Co3O4 nanocomposites

554

Fabrication and study of UV-shielding and photocatalytic performance of uniform TiO2/SiO2 core-shell nanobers via single-nozzle co-electrospinning and interface sol-gel reaction

555

Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method

556

Fabrication and study on tribological characteristics of bronze–alumina–silver composite under sea water condition

557

Fabrication and study on tribological characteristics of cast copper–TiO2–boric acid hybrid composites

558

Fabrication and study the performance of solar cell made from new nanostructure phthalocyanine complex thin film

559

Fabrication and study the performance of solar cell made from new nanostructure phthalocyanine complex thin film

560

Fabrication and superhydrophobicity of fluorinated carbon fabrics with micro/nanoscaled two-tier roughness Original Research Article

561

Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite

562

Fabrication and surface characterization of biomimic superhydrophobic copper surface by solution-immersion and self-assembly

563

Fabrication and Surface Characterization of Poly(4-aminodiphenylamine) Film Modified Electrode and its Application for Lead and Cadmium Determination

564

Fabrication and surface characterization of pulsed reactive closed-field unbalanced magnetron sputtered amorphous silicon nitride films

565

Fabrication and surface photovoltage study of hematite microparticles with hollow spindle-shaped structure

566

Fabrication and surface treatment of silicon mold for polymer microarray

567

Fabrication and surface-enhanced Raman scattering (SERS) of Ag/Au bimetallic films on Si substrates

568

Fabrication and sustained release properties of poly(ε-caprolactone) electrospun fibers loaded with layered double hydroxide nanoparticles intercalated with amoxicillin

569

Fabrication and synthesis of solvent-free aluminum oxide colloids by electrical explosion of wires in liquids method

570

Fabrication and synthesis of α-alumina nanopowders by thermal decomposition of ammonium aluminum carbonate hydroxide (AACH)

571

Fabrication and technological properties of nanoporous spinel/forsterite/zirconia ceramic composites

572

Fabrication and tensile behaviors of mini-C/SiC composites reinforced by Si3N4 nanowires

573

Fabrication and tensile properties of in situ TiBw and TiCp hybrid-reinforced titanium matrix composites based on Ti–B4C–C

574

Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES

575

Fabrication and test of a 70 000 channels electronic pad readout system for multi-step avalanche chambers

576

Fabrication and test of a 70 000 channels electronic pad readout system for multi-step avalanche chambers

577

Fabrication and test of a racetrack magnet using pre-reacted Nb/sub 3/Sn cable

578

Fabrication and test of a superconducting coil for SMES systems

579

Fabrication and test of radial grooved micro heat pipes

580

Fabrication and test of sol–gel based planar oxygen optodes for use in aquatic sediments

581

Fabrication and test of Superconducting Single Photon Detectors

582

Fabrication and test of Superconducting Single Photon Detectors

583

Fabrication and test of the LDX levitation coil

584

Fabrication and test of thin double-layered annulus metal hydride bed

585

Fabrication and testing of a low-cost ceramic-cup soil solution sampler

586

Fabrication and testing of a magnetically actuated micropump

587

Fabrication and testing of a miniature H2/O2 and MeOH/O2 fuel cell

588

Fabrication and testing of a planar microstructured concept module with integrated palladium membranes

589

Fabrication and testing of a SU-8 thermal flow sensor

590

Fabrication and testing of bubble powered micropumps using embedded microheater

591

Fabrication and testing of composite isogrid stiffened cylinder

592

Fabrication and testing of composite isogrid stiffened cylinder

593

Fabrication and testing of coplanar single-chamber micro solid oxide fuel cells with geometrically complex electrodes

594

Fabrication and Testing of Cuff Connections for GFRP Box Sections

595

Fabrication and Testing of Metal Foil Planar Switch

596

Fabrication and testing of nanoporous Si3N4 optical filters for gas sensing applications

597

Fabrication and testing of natural fibre composites: Vakka, sisal, bamboo and banana

598

Fabrication and testing of thin composite isogrid stiffened panel

599

Fabrication and tests of 3He and 2H targets for beam polarization measurement

600

Fabrication and tests of EF conductors for JT-60SA

601

Fabrication and the wear behaviors of the carbon/aluminum composites based on wood templates Original Research Article

602

Fabrication and their photoelectric conversion properties of two kinds of self-assembled monolayers and Langmuir–Blodgett film of mono-substituted C -malonic acid

603

Fabrication and thermal analysis of a copper/diamond/copper thermal spreading device

604

Fabrication and thermal analysis of layer-by-layer micro- and nanotubes

605

Fabrication and thermal annealing behavior of nanoscale ripple fabricated by focused ion beam

606

Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering

607

Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers

608

Fabrication and thermal degradation behavior of poly(vinyl chloride) particle coated with polythiophene and polyaniline

609

Fabrication and thermal degradation behavior of polystyrene nanoparticles coated with smooth polyaniline

610

Fabrication and thermal expansion properties of ZrW2O8/Zr2WP2O12 composites

611

Fabrication and thermal performance of porous crack composite wick flattened heat pipe

612

Fabrication and thermal properties of a YSZ–NiCr joint with an interlayer of YSZ–NiCr functionally graded material

613

Fabrication and thermoelectric performance of textured n-type Bi2(Te,Se)3 by spark plasma sintering

614

Fabrication and thermoelectric properties of c-axis-aligned Bi0.5Sb1.5Te3 with a high magnetic field Original Research Article

615

Fabrication and thermoelectric properties of fine-grained TiNiSn compounds

616

Fabrication and thermoelectric properties of heavily rare-earth metal-doped SrO(SrTiO3)n (n = 1, 2) ceramics

617

Fabrication and thermoelectric properties of Mg2Si1−xSnx (0 ≤ x ≤ 1.0) solid solutions by solid state reaction and spark plasma sintering

618

Fabrication and thermoelectric properties of Mg2Si-based composites using reduction reaction with additives

619

Fabrication and Thermoelectric Properties of n-Type SbI3-Doped Bi2Te2.85Se0.15 Compounds by Hot Extrusion

620

Fabrication and thermoelectric properties of p-type Bi0.5Sb1.5Te3 compounds by ingot extrusion

621

Fabrication and third-order optical nonlinearities of Na2O–B2O3–SiO2 glasses containing metallic Bi, Bi2O3 and Bi2S3 crystals

622

Fabrication and toughening of NbCr2 matrix composites alloyed with Ni obtained by powder metallurgy

623

Fabrication and transformation of dense SnO2 via laser ablation condensation Original Research Article

624

Fabrication and transport characteristics of long length Y-123 coated conductors processed by IBAD and PLD

625

Fabrication and transport mechanisms of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitrophenyl)acetonitrile/p-silicon hybrid solar cell

626

Fabrication and Transport Performance Characterization of Chemically-Doped Three-branch Junction Graphene Device

627

Fabrication and transport properties of 50-nm-wide AurCrrGaInAs electrode for electron wave interference device

628

Fabrication and transport properties of ex situ powder-in-tube (PIT) processed (Ba,K)Fe2As2 superconducting wires

629

Fabrication and tribological behavior of sputtering TaN coatings

630

Fabrication and tribological properties of a multiply-alkylated cyclopentane/reduced graphene oxide composite ultrathin film Original Research Article

631

Fabrication and tribological properties of Al2O3/TiC ceramic with nano-textures and WS2/Zr soft-coatings

632

Fabrication and tribological properties of B2O3 as friction reducing coatings for carbon-carbon composites

633

Fabrication and tribological properties of B2O3 as friction reducing coatings for carbon–carbon composites

634

Fabrication and tribological properties of composite coatings produced by lithographic and microbeading methods

635

Fabrication and tribological properties of polyelectrolyte multilayers containing in situ gold and silver nanoparticles

636

Fabrication and tribological properties of super-hydrophobic surfaces based on porous silicon

637

Fabrication and tribological properties of titanium nitride coatings incorporating solid lubricant microreservoirs

638

Fabrication and ultraviolet-shielding properties of silica-coated titania-doped ceria nanoparticles

639

Fabrication and upconversion luminescence of Er3+/Yb3+ codoped TeO2–WO3–Na2O–Nb2O5–Al2O3 glass fibers

640

Fabrication and Usage of a Nanocomposite Scaffold in Segmental Bone Healing: An Animal Model Study

641

Fabrication and use of hollow fiber thin film composite membranes for ethanol dehydration

642

Fabrication and vacuum annealing of transparent conductive Ga-doped Zn0.9Mg0.1O thin films prepared by pulsed laser deposition technique

643

Fabrication and Validation of Novel Fexofenadine Sensor using Alizarin Red S as Ion Exchanger on PVC Matrix for Assay in Pharmaceuticals and Spiked Human Urine Samples

644

Fabrication and Validation of Respiratory Control Belt Using Load Cell Sensor

645

Fabrication and visible-light photochromism of novel hybrid inorganic–organic film based on polyoxometalates and ethyl cellulose

646

Fabrication and voltammetric study of lanthanum 2,6-dichlorophenolindophenol chemically modified screen printed electrodes.: Application for the determination of ascorbic acid Original Research Article

647

Fabrication and wear properties of Fe3Al-based composites

648

Fabrication and wear protection performance of superhydrophobic surface on zinc

649

Fabrication and wear resistance of Al–Cu–Fe quasicrystal-epoxy composite materials

650

Fabrication and wear resistance of Al–Cu–Fe quasicrystal-epoxy composite materials

651

Fabrication approaches for the creation of physical models from microscopy data

652

Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review

653

Fabrication at wafer level of miniaturized gas sensors based on SnO2 nanorods deposited by PECVD and gas sensing characteristics

654

Fabrication by electrolytic deposition of platinum black electrocatalyst for oxidation of ammonia in alkaline solution

655

Fabrication by electrolytic deposition of Pt–Ni electrocatalyst for oxidation of ammonia in alkaline solution

656

Fabrication by vacuum die casting and simulation of aluminum bipolar plates with micro-channels on both sides for proton exchange membrane (PEM) fuel cells

657

Fabrication characteristics of an anode-supported thin-film electrolyte fabricated by the tape casting method for IT-SOFC

658

Fabrication Effects on Polysilicon-based Microcantilever Piezoresistivity for Biological Sensing Application

659

Fabrication Fe3 O4 /SiO2 /TiO2 Nanocomposites and Degradation of Rhodamine B Dyes under UV Light Irradiation

660

Fabrication method and thermal conductivity assessment of molybdenum-precipitated uranium dioxide pellets

661

Fabrication method for UO2 pellets with large grains or a single grain by sintering in air

662

Fabrication method of extracting of Co(II) in water samples by synthesis MG-Chi/Fe3O4

663

Fabrication method of parallel mesoporous carbon nanotubes

664

Fabrication method of TiO2–SiO2 hybrid capsules and their UV-protective property

665

Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite

666

Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels

667

Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems

668

Fabrication methods of an engineered microenvironment for analysis of cell–biomaterial interactions

669

Fabrication methods of porous metals for use in orthopaedic applications

670

Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications

671

Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications

672

Fabrication nanopowders by high-energy ball-milling and low temperature sintering Li2TiO3 microwave dielectrics

673

Fabrication new PES-based mixed matrix nanocomposite membranes using polycaprolactone modified carbon nanotubes as the additive: Property changes and morphological studies Original Research Article

674

Fabrication of Macro- AND Micropore Forming DCPD/ β-TCP Porous Scaffolds: Effect of Setting-Time Reaction and Acidic Calcium Phosphate Solution

675

Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance

676

Fabrication of (Ba–Sr)Bi4Ti4O15 powders and thin films by metal organic solution routes

677

Fabrication of (beta)-Ni(OH)2 and NiO hollow spheres by a facile template-free process

678

Fabrication of (BiNa)0.5TiO3–BaTiO3 textured ceramics by tape casting

679

Fabrication of (Ca + Yb)- and (Ca + Sr)-stabilized α-SiAlON by combustion synthesis

680

Fabrication of (expandable mica)/nylon 6 composites

681

Fabrication of (polyvinyl chloride/cellulose acetate) electrodialysis heterogeneous cation exchange membrane: Characterization and performance in desalination process Original Research Article

682

Fabrication of (Th,U)O2 pellets containing 3 mol% of uranium by gel pelletisation technique

683

Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite

684

Fabrication of (TMTSF)2PF6 thin crystals in a confined electrode

685

Fabrication of [Fe₃O₄@SiO₂@Si-(CH₂)₃-Bipyr][ZnₓClᵧ] as a Novel Magnetic Catalyst, and Its Utility for Construction of 𝐵𝑖𝑠-Coumarins and 𝐵𝑖𝑠(Pyrazolyl)Methanes

686

Fabrication of <1 1 0> oriented tungsten nano-tips by field-assisted water etching

687

Fabrication of 0.12 mm pMOSFETs on high Ge fraction Si/Si1 xGex/Si(1 0 0) heterostructure with ultrashallow source/drain formed using B-doped SiGe CVD

688

Fabrication of 1, 1-Dimethylhydrazine Gas sensor Based

689

Fabrication of 10 mm diameter fully dense Al86Ni6Y4.5Co2La1.5 bulk metallic glass with high fracturestrength

690

Fabrication of 100 nm gate length MOSFETʹs using a novel carbon nanotube-based nano-lithography

691

Fabrication of 100nm Nano Pillars on Silicon

692

Fabrication of 15 nm curvature radius polymer tip probe on an optical fiber via two-photon polymerization and O2-plasma ashing

693

Fabrication of 184W target on carbon backing

694

Fabrication of 184W target on carbon backing

695

Fabrication of 1D nanofluidic channels on glass substrate by wet etching and room-temperature bonding Original Research Article

696

Fabrication of 2024 aluminum spun tube using a thermomechanical treatment process

697

Fabrication of 2-Chloropyridine-Functionalized Fe 3 O 4 /Amino-Silane Core–Shell Nanoparticles

698

Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800 °C

699

Fabrication of 2-D photonic crystals using azo polymers

700

Fabrication of 3,4-dihydropyrimidin-2-(1H)-ones/thione compounds via Cu2V2O7 nanocatalyst synthesized by solid state method

701

Fabrication of 3.9–4.2 μm mid-infrared surface emitting PbSe/PbEuTe quantum dot lasers using molecular beam epitaxy

702

Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography

703

Fabrication of 3D carbon microstructures using glassy carbon microspheres and organic precursors

704

Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system

705

Fabrication of 3D detectors with columnar electrodes of the same doping type

706

Fabrication of 3D detectors with columnar electrodes of the same doping type

707

Fabrication of 3-D gelatin-patterned glass substrates with layer-by-layer and lift-off (LbL-LO) technology

708

Fabrication of 3-D gelatin-patterned glass substrates with layer-by-layer and lift-off (LbL-LO) technology

709

Fabrication of 3D micro-cantilevers based on MBE-grown strained semiconductor layers

710

Fabrication of 3-D microstructures with a catalytic surface composed of an ion-implanted layer

711

Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process

712

Fabrication of 5 V lithium rechargeable micro-battery

713

Fabrication of 50 nm high performance strained-SiGe pMOSFETs with selective epitaxial growth

714

Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route

715

Fabrication of 550 nm gratings in fused silica by laser induced backside wet etching technique

716

Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO–YSZ slurry

717

Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes

718

Fabrication of 9,10-phenanthrenequinone/carbon nanotubes composite modified electrode and its electrocatalytic property to the reduction of iodate

719

Fabrication of 90,94Zr targets on carbon backing

720

Fabrication of 90,94Zr targets on carbon backing

721

Fabrication of 94Zr thin target for recoil distance doppler shift method of lifetime measurement

722

Fabrication of 94Zr thin target for recoil distance doppler shift method of lifetime measurement

723

FABRICATION OF A “CONE PAA NANOSTRUCTURE” BY GRADUAL DECREASE OF VOLTAGE

724

Fabrication of a Au@SnO2 core–shell structure for gaseous formaldehyde sensing at room temperature

725

Fabrication of a bilayer potentiometric phosphate biosensor by cross-link immobilization with bovine serum albumin and glutaraldehyde Original Research Article

726

Fabrication of a bimetallic Cu/Pt particle-modified carbon nanotube paste electrode and its use for the electrocatalytic oxidation of methanol

727

Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes

728

Fabrication of a Capacitance-Based Tactile Sensor with Biomedical Applications

729

Fabrication of a cell array on ultrathin hydrophilic polymer gels utilising electron beam irradiation and UV excimer laser ablation

730

Fabrication of a chemically modified electrode containing 12-molybdophosphoric acid by the sol–gel technique and its application as an amperometric detector for iodate Original Research Article

731

Fabrication of a chemosensor array on a microfluidic device by a simple gel-based method

732

Fabrication of a complex InAs ring-and-dot structure by droplet epitaxy

733

Fabrication of a composite nano-ultrathin film of poly-phenylene-vinylene and C60 derivative

734

Fabrication of a composite powder and its application as an active brazing alloy

735

Fabrication of a composite system combining solid lipid nanoparticles and thermosensitive hydrogel for challenging ophthalmic drug delivery

736

Fabrication of a composite vascular scaffold using electrospinning technology

737

Fabrication of a Configurable, Single-Use Microfluidic Device

738

Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its application as a potentiometric sensor of iodide ion Original Research Article

739

Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its electrocatalytic oxidation of hydrazine

740

Fabrication of a Cranial Prosthesis Combined with an Ocular Prosthesis Using Rapid Prototyping: A Case Report

741

Fabrication of a customized impression metal jig for an implant‑supported overdenture with a milled bar

742

Fabrication of a dense La0.2Sr0.8CoO3−δ/CoO composite membrane by utilizing the electroless cobalt plating technique

743

Fabrication of a few-electron In0.56Ga0.44As vertical quantum dot with an Al2O3 gate insulator

744

Fabrication of a field effect transistor structure using charge-ordered organic materials α-(BEDT-TTF)2I3 and α′-(BEDT-TTF)2IBr2

745

Fabrication of a first wall panel by diffusion bonding

746

Fabrication of a flower-like Pd/CeO2 material with improved three-way catalytic performance

747

Fabrication of a full-size mock-up for inboard 10° section of ITER vacuum vessel thermal shield

748

Fabrication of a gecko seta-like structure using polydimethylsiloxane

749

Fabrication of a gold pattern with a nanoscale edge by using heptanethiol self-assembled monolayers and a metastable helium beam

750

Fabrication of a graphene field effect transistor array on microchannels for ethanol sensing

751

Fabrication of a graphene oxide–gold nanorod hybrid material by electrostatic self-assembly for surface-enhanced Raman scattering Original Research Article

752

Fabrication of a graphene–cuprous oxide composite

753

Fabrication of a Hard Tissue Replacement Using Natural Hydroxyapatite Derived from Bovine Bones by Thermal Decomposition Method

754

Fabrication of a He-cooled divertor module for DEMO reactor

755

Fabrication of a high hydrophobic PVDF membrane via nonsolvent induced phase separation Original Research Article

756

Fabrication of a high lithium ion conducting lithium borosilicate glass

757

Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments

758

Fabrication of a high-field short-period superconducting undulator

759

Fabrication of a high-field short-period superconducting undulator

760

Fabrication of a highly selective and sensitive Gd(III)-PVC membrane sensor based on N-(2-pyridyl)-N′-(4-nitrophenyl)thiourea

761

Fabrication of a highly selective cadmium (II) sensor based on 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane as a supramolecular ionophore

762

Fabrication of a highly selective Eu(III) membrane sensor based on a new S–N hexadentates Schiffʹs base

763

Fabrication of a highly sensitive electrochemiluminescence lactate biosensor using ZnO nanoparticles decorated multiwalled carbon nanotubes

764

Fabrication of a highly sensitive sensor electrode using a nano-gapped gold particle film

765

Fabrication of a highly sensitive sumatriptan sensor based on ultrasonic-electrodeposition of Pt nanoparticles on the ZrO2 nanoparticles modified carbon paste electrode

766

Fabrication of a high-performance hip prosthetic stem using β Ti–33.6Nb–4Sn

767

Fabrication of a high-strength hydrogel with an interpenetrating network structure

768

Fabrication of a hybrid graphene/layered double hydroxide material Original Research Article

769

Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method

770

Fabrication of a large-area, flexible and color-neutral single-wall carbon nanotube:sodium dodecylbenzene sulfonate/poly-(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) transparent conductive film having a new conduction mechanism

771

Fabrication of a layered hybrid membrane using an organosilica separation layer on a porous polysulfone support, and the application to vapor permeation

772

Fabrication of a Lead All Solid State Sensor for ppb Level Monitoring of Aqueous Lead Samples

773

Fabrication of a Li4SiO4–Pb tritium breeding material

774

Fabrication of a lithium chloride solution based composite supported liquid membrane and its moisture permeation analysis

775

Fabrication of a logic gate circuit based on ambipolar field-effect transistors with thin films of C60 and pentacene

776

Fabrication of a material with composition gradient for metal/ceramic assembly

777

Fabrication of a MEMS-based separation module for liquid chromatography

778

Fabrication of a mesophase pitch-based submicron carbon-fiber web

779

Fabrication of a mesoporous Pt-carbon catalyst by the direct templating of mesoporous Pt-alumina for the methanol electro-oxidation

780

Fabrication of a methanol chemical sensor based on hydrothermally prepared α-Fe2O3 codoped SnO2 nanocubes

781

Fabrication of a microfluidic chip containing dam, weirs and gradient generator for studying cellular response to chemical modulation

782

Fabrication of a micro-optical coupling structure by laser ablation

783

Fabrication of a micro-pin array with high density and high hardness by combining mechanical peck-drilling and reverse-EDM

784

Fabrication of a model continuously graded co-electrospun mesh for regeneration of the ligament–bone interface

785

Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system Original Research Article

786

Fabrication of a Multilayer Film Electrode Containing Quaternized Poly(4-vinylpyridine) Complexed with [Os(bpy)2CI]+/2 and Its Electrocatalytic Oxidation of L-Cysteine

787

Fabrication of a Multilayer Film Electrode Containing Quaternized Poly(4-vinylpyridine) Complexed with [Os(bpy)2CI]+/2 and Its Electrocatalytic Oxidation of L-Cysteine

788

Fabrication of a multi-layered carbon nanotube/SiC stack structure

789

Fabrication of a multi-walled carbon nanotube-deposited glass fiber air filter for the enhancement of nano and submicron aerosol particle filtration and additional antibacterial efficacy

790

Fabrication of a nano-magnet on a piezo-driven tip in a TEM sample holder

791

Fabrication of a nanophotonic quantum dot waveguide and photodetector integrated device

792

Fabrication of a Nanostructure Voltammetric Sensor for Carmoisine Analysis as a Food Dye Additive

793

Fabrication of a nanostructure-based electrochemical sensor for simultaneous determination of N-acetylcysteine and acetaminophen

794

Fabrication of a new composite orthodontic archwire and validation by a bridging micromechanics model

795

Fabrication of a new electrochemiluminescent sensor for fentanyl citrate based on glassy carbon microspheres and ionic liquid composite paste electrode Original Research Article

796

Fabrication of a new fluorescent polymeric nanoparticle containing naphthalimide and investigation on its interaction with bovine serum albumin

797

Fabrication of a new polyaniline grafted multi-wall carbon nanotube modified electrode and its application for electrochemical detection of hydrogen peroxide Original Research Article

798

Fabrication of a New Selective Optical Sensor for Cobalt Determination Using 1-Nitroso-2-naphthol and Monitoring of Cobalt in Water Samples

799

Fabrication of a New Type of Double-Shell Target Having a PVA Inner Layer

800

Fabrication of a new type of optical medium with metallic nanolayers by ion implantation technique and vacuum evaporation

801

Fabrication of a nitrided coating on a novel Ni–Cr nanocomposite with increased surface hardness

802

Fabrication of a non-cement binder using slag, palm oil fuel ash and rice husk ash with sodium hydroxide

803

Fabrication of a nonenzymatic cholesterol biosensor using carbon nanotubes from coconut oil

804

Fabrication of a novel 1,3-bis(p-hydrazonobenzoicacid)indane Langmuir–Blodgett film and organic vapor sensing properties

805

Fabrication of a novel 2D-graphene/2D-NiO nanosheet-based hybrid nanostructure and its use in highly sensitive NO2 sensors

806

Fabrication of a novel bio-adsorbent based on the yellow membrane of chicken feet for cationic dye of methylene blue removal: adsorption, equilibrium, kinetic and thermodynamic studies

807

Fabrication of a Novel Electrochemical Nanosensor for Voltammetric Determination of Naproxen

808

Fabrication of a Novel Electrochemical Sensor for Simultaneous Determination of Toxic Lead and Cadmium Ions

809

Fabrication of a novel electrochemiluminescence glucose biosensor using Au nanoparticles decorated multiwalled carbon nanotubes

810

Fabrication of a novel glucose biosensor based on Pt nanoparticles-decorated iron oxide-multiwall carbon nanotubes magnetic composite

811

Fabrication of a novel immunosensor using functionalized self-assembled monolayer for trace level detection of TNT by surface plasmon resonance

812

Fabrication of a novel impedance cell sensor based on the polystyrene/polyaniline/Au nanocomposite

813

FABRICATION OF A NOVEL MEMS CAPACITIVE MICROPHONE USING LATERAL SLOTTED DIAPHRAGM

814

Fabrication of a novel nanocomposite based on sol–gel process for hollow fiber-solid phase microextraction of aflatoxins: B1 and B2, in cereals combined with high performane liquid chromatography–diode array detection

815

Fabrication of a novel organic-inorganic hybrid nanocatalyst and its application for the synthesis of bis(pyrazolyl)methanes

816

Fabrication of a novel Pd/γ-alumina graded membrane by electroless plating on nanoporous γ-alumina

817

Fabrication of a Novel Phenolic Compound Biosensor Using Laccase Enzyme and Metal-organic Coordination Polymers

818

Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering

819

Fabrication of a novel scaffold of clotrimazole-microemulsion-containing nanofibers using an electrospinning process for oral candidiasis applications

820

Fabrication of a Novel Shaped Graphene/poly (Evan’s blue) Composite Chemical Sensor for the Electrocatalytic Boost up of Neurotransmitter (Dopamine): A Voltammetric Investigation

821

Fabrication of a novel temperature sensitive poly(N-isopropyl-3-butenamide) hydrogel

822

Fabrication of a novel thin-film nanocomposite (TFN) membrane containing MCM-41 silica nanoparticles (NPs) for water purification

823

Fabrication of a one-dimensional superlattice by alternative deposition of dioxime platinum complexes on KBr (100) surface

824

Fabrication of a phospholipid membrane-mimetic film on the luminal surface of an ePTFE vascular graft

825

Fabrication of a polymer microstructure by a modified DXRL process

826

Fabrication of a polymer-based biodegradable stent using a CO2 laser

827

Fabrication of a protein film by electrospray deposition method and investigation of photochemical properties by persistent spectral hole burning

828

Fabrication of a prototype humidity-sensitive capacitor via layer-by-layer self-assembling technique

829

Fabrication of a P-stabilized InP(0 0 1) surface at low pressure and temperature using t-butylphosphine (TBP)

830

Fabrication of a PVC membrane samarium(III) sensor based on N,N′,N″-tris(4-pyridyl)trimesic amide as a selectophore

831

Fabrication of a quantum dot-polymer matrix by layer-by-layer conjugation

832

Fabrication of a quantum point contact by the dynamic plowing technique and wet-chemical etching

833

Fabrication of a quantum point contact by the dynamic plowing technique and wet-chemical etching

834

Fabrication of a random convex-lens-shaped microstructure using a laser ablation

835

Fabrication of a repulsive-type magnetic bearing using a novel arrangement of permanent magnets for vertical-rotor suspension

836

Fabrication of a Reversible Protein Array Directly from Cell Lysate Using a Stimuli-Responsive Polypeptide

837

Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization

838

Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method

839

FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT

840

Fabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin

841

Fabrication of a sensor chip containing Au and Ag electrodes and its application for sensitive Hg(II) determination using chronocoulometry Original Research Article

842

Fabrication of a short carbon fiber/gel composite that responds to a magnetic field Original Research Article

843

Fabrication of a SiC/Si/MoSi2 multi-coating on graphite materials by a two-step technique

844

Fabrication of a silica ceramic membrane using the aerosol flame deposition method for pretreatment focusing on particle control during desalination Original Research Article

845

Fabrication of a silicon based electroluminescent device

846

Fabrication of a Simple Cast-deposited Nafion/multi-walled Carbon Nanotube Composite Film as a Sensor for Voltammetric Determination of Pethidine

847

Fabrication of a single-walled carbon nanotube-modified glassy carbon electrode and its application in the electrochemical determination of epirubicin

848

Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper

849

Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper

850

Fabrication of a solid-state cell using vitamin C as sensitizer

851

Fabrication of a solution-processed IGZO/NiO p-n diode

852

Fabrication of a stable inorganic–organic hybrid multilayer film with uniform and dense inorganic nanoparticle deposition

853

Fabrication of a stable poly(vinylpyrrolidone)/poly(urushiol) multilayer ultrathin film through layer-by-layer assembly and photo-induced polymerization

854

Fabrication of a stable superhydrophobic film constructed by poly(vinylpyrrolidone)/poly(urushiol)-CuS through layer-by-layer assembly

855

Fabrication of a strain sensor for bone implant failure detection based on piezoresistive doped nanocrystalline silicon

856

Fabrication of a strained is on sub-10-nm-thick SiGe-on-insulator virtual substrate

857

Fabrication of a Sulfite Biosensor by the Use of Conducting Polymer

858

Fabrication of a superconducting MEM shunt switch for RF applications

859

Fabrication of a superhydrophobic carbon nanotube coating with good reusability and easy repairability

860

Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating

861

Fabrication of a superhydrophobic surface on a wood substrate

862

Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition

863

Fabrication of a superhydrophobic surface via spraying with polystyrene and multi-walled carbon nanotubes

864

Fabrication of a superhydrophobic ZnO nanorod array film on cotton fabrics via a wet chemical route and hydrophobic modification

865

Fabrication of a switchable nano-surface composed of acidic and basic block-polypeptides

866

Fabrication of a tantalum-clad tungsten target for KENS

867

Fabrication of a tantalum-clad tungsten target for LANSCE

868

Fabrication of a thermoplastic multilayer microfluidic chip

869

Fabrication of a thick surface layer of Al3Ti on Ti substrate by reactive-pulsed electric current sintering

870

Fabrication of a thin catalyst layer using organic solvents

871

Fabrication of a three-dimensional complex carbon nanoneedle from carbon nanowalls

872

Fabrication of a TiO2 photocatalyst by anodic oxidation of Ti in an acetic acid electrolyte

873

Fabrication of a TiO2/carbon nanowall heterojunction and its photocatalytic ability Original Research Article

874

Fabrication of a tunable glucose biosensor based on zinc oxide/chitosan-graft-poly(vinyl alcohol) core-shell nanocomposite

875

Fabrication of a versatile microanalytical system without need for clean room conditions

876

Fabrication of a versatile microanalytical system without need for clean room conditions Original Research Article

877

Fabrication of a V-groove on the optical fiber connector using a miniaturized machine tool

878

Fabrication of a working Bi-2223 superconducting magnet cooled by liquid nitrogen Original Research Article

879

Fabrication of a ZrC–SiC matrix for ceramic matrix composites and its properties

880

Fabrication of a ZrC–SiC matrix for ceramic matrix composites via in-situ reaction and its application

881

Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements

882

Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution

883

Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution

884

Fabrication of a-AlO(OH) SiO2 with core-shell structures by heterogeneous nucleation-and-growth processing

885

Fabrication of activated carbon nanoparticles from PAN precursor

886

Fabrication of activated carbon nanoparticles from PAN precursor

887

Fabrication of activated carbons with well-defined macropores derived from sulfonated poly(divinylbenzene) networks Original Research Article

888

Fabrication of adhesive superhydrophobic Ni-Cu-P alloy coatings with high mechanical strength by one step electrodeposition

889

Fabrication of advanced SiC fiber/F-CVI SiC matrix composites with SiC/C multi-layer interphase

890

Fabrication of Ag nanoclusters in single-crystal MgO by high-energy ion implantation

891

Fabrication of Ag nanoparticles by γ-irradiation: Application to surface-enhanced Raman spectroscopy of fungicides

892

Fabrication of Ag nanoparticles dispersed in PVA nanowire mats by microwave irradiation and electro-spinning

893

Fabrication of Ag nanoparticles-coated macroporous SiO2 structure by using polystyrene spheres

894

Fabrication of Ag/polypyrrole coaxial nanocables through common ions adsorption effect

895

Fabrication of Ag/TiO2 nanotube array with enhanced photo-catalytic degradation of aqueous organic pollutant

896

Fabrication of Ag/Tl–Ba–Ca–CuO/CdSe nanostructure by electro-deposition technique

897

Fabrication of agar-gel microelectrodes and their application in the study of ion transfer across the agar–water ∣ 1,2-dichloroethane interface

898

Fabrication of Al alloy matrix composite reinforced with subsive-sized Al2O3 particles by the in situ displacement reaction using high-energy ball-milled powder

899

Fabrication of Al nanoparticles and their electrical properties studied by capacitance–voltage measurements

900

Fabrication of Al/A206–Al2O3 nano/micro composite by combining ball milling and stir casting technology

901

Fabrication of Al/Al2O3 composites by in-situ powder metallurgy (IPM)

902

Fabrication of Al/Al2O3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties

903

Fabrication of Al/Al3Fe composites by plasma synthesis method

904

Fabrication of Al/Al3Fe composites by plasma synthesis method

905

Fabrication of Al/Al3Fe composites by plasma synthesis method

906

Fabrication of Al/Al3Mg2 composite by vacuum annealing and accumulative roll-bonding process

907

Fabrication of Al/AlN composites by in situ reaction

908

Fabrication of Al/Cup composite by accumulative roll bonding process and investigation of mechanical properties

909

Fabrication of Al/MgO/C and C/MgO/InSe/C tunneling barriers for tunable negative resistance and negative capacitance applications

910

Fabrication of Al/Ni/Cu composite by accumulative roll bonding and electroplating processes and investigation of its microstructure and mechanical properties

911

Fabrication of Al–2 vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties

912

Fabrication of Al2O3 nanofluid by a plasma arc nanoparticles synthesis system

913

Fabrication of Al2O3/TiB2/AlN/TiN and Al2O3/TiC/AlN composites

914

Fabrication of Al2O3–20 vol.% Al nanocomposite powders using high energy milling and their sinterability

915

Fabrication of Al2O3–Al composites by infiltration method and their characteristic

916

Fabrication of Al2O3-SiCw in situ composite through a new combustion technique

917

Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach

918

Fabrication of Al6061 composite with high SiC particle loading by semi-solid powder processing Original Research Article

919

Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying

920

Fabrication of Al–7wt%Si–0.4wt%Mg/SiC nanocomposite powders and bulk nanocomposites by high energy ball milling and powder metallurgy

921

Fabrication of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze casting

922

Fabrication of alginate/nanoTiO2 needle composite scaffolds for tissue engineering applications

923

Fabrication of AlGraphiteAl2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite

924

Fabrication of aligned and molecularly oriented electrospun polyacrylonitrile nanofibers and the mechanical behavior of their twisted yarns

925

Fabrication of aligned carbon nanotubes on Cu catalyst by dc plasma-enhanced catalytic decomposition

926

Fabrication of aligned ferrite nanofibers by magnetic-field-assisted electrospinning coupled with oxygen plasma treatment

927

Fabrication of aligned lamellar porous alumina using directional solidification of aqueous slurries with an applied electrostatic field

928

Fabrication of aligned microwire arrays of perylene bisimide by micromolding in capillary

929

Fabrication of alignment layer free flexible liquid crystal cells using thermal nanoimprint lithography

930

Fabrication of alignment structures for a fiber resonator by use of deep-ultraviolet lithography

931

Fabrication of all oxide transparent p–n homojunction using bipolar CuInO2 semiconducting oxide with delafossite structure

932

Fabrication of all solid-state lithium polymer secondary batteries using PEG-borate/aluminate ester as plasticizer for polymer electrolyte

933

Fabrication of all solid-state rechargeable lithium battery and its electrochemical properties

934

Fabrication of all YBaCuO trilayer Josephson junctions with YBaCuO wiring layer

935

Fabrication of AlLi and Al2Li3/Al4Li9 intermetallic compounds by molten salt electrolysis and their application for hydrogen generation from water

936

Fabrication of Al–LiAlO2 metal matrix composites and crystalline γ-LiAlO2

937

Fabrication of alloys and superlattices based on ZnO towards ultraviolet laser

938

Fabrication of alloys and superlattices based on ZnO towards ultraviolet laser

939

Fabrication of all-solid-state battery using Li5La3Ta2O12 ceramic electrolyte

940

Fabrication of all-solid-state electrochemical microcapacitors

941

Fabrication of all-solid-state thin-film secondary cells using hexacyanometallate-based electrode materials

942

Fabrication of alumina ceramics from powders made by sol–gel type hydrolysis in microemulsions

943

Fabrication of alumina nanofibers by precipitation reaction combined with heterogeneous azeotropic distillation process

944

Fabrication of alumina parts by electrophoretic deposition from ethanol and aqueous suspensions

945

Fabrication of alumina/zirconia functionally graded material: From optimization of processing parameters to phenomenological constitutive models

946

Fabrication of alumina-based ceramic foams utilizing superplasticity

947

Fabrication of aluminium foams from powder by hot extrusion and foaming

948

Fabrication of Aluminum 5083/SiC Surface Composite on Tungsten Inert Gas Weld Joint by Novel Direct Friction Stir Processing Technique

949

Fabrication of aluminum carbide nanowires by a nano-template reaction Original Research Article

950

Fabrication of aluminum foam stabilized by copper-coated carbon fibers

951

Fabrication of Aluminum Rectangular Twist Waveguides: Experimental Investigation and FEM Simulation

952

Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics

953

Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics

954

Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics

955

Fabrication of Aluminum/Gr Composites and Investigation of its Tribological and Wear Properties

956

Fabrication of aluminum–alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing

957

Fabrication of aluminum–carbon nanotube composites and their electrical properties Original Research Article

958

Fabrication of AMCs by spray forming: Setting of cognition and social parameters to accelerate the convergence in optimization of spray forming process

959

Fabrication of AMoO4 (A = Ba, Sr) film on Mo substrate by solution reaction assisted ball-rotation

960

Fabrication of amorphous iron-boron films by electroless plating

961

Fabrication of amorphous pharmaceutical materials by electrospraying into reduced pressure

962

Fabrication of amorphous silicon carbide films using VHF-PECVD for triple-junction thin-film solar cell applications

963

Fabrication of amorphous silicon films for arrayed waveguide grating application

964

Fabrication of Amorphous Silicon Microgap Structure for Energy Saving Devices

965

Fabrication of amorphous silicon nanocones by bias-enhanced microwave plasma CVD

966

Fabrication of amperometric xanthine biosensors based on direct chemistry of xanthine oxidase

967

Fabrication of AMS-02 microstrip detectors at ITC-irst

968

Fabrication of AMS-02 microstrip detectors at ITC-irst

969

Fabrication of an alpha particle counter: spin coated films of synthesized nanocrystalline cadmium tungstate powder

970

Fabrication of an aluminum, Caribbean-style, musical pan: Metallurgical and acoustical characterization

971

Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles

972

Fabrication of an amperometric ascorbate biosensor using egg shell membrane bound Lagenaria siceraria fruit ascorbate oxidase

973

Fabrication of an Amperometric Glucose Biosensor Based on a Prussian Blue/Carbon Nanotube/Ionic Liquid Modified Glassy Carbon Electrode

974

Fabrication of an annealable platinum (111) single crystal ultramicroelectrode

975

Fabrication of an anode-supported yttria-stabilized zirconia thin film for solid-oxide fuel cells via wet powder spraying

976

Fabrication of an asymmetric hollow particle with a thermo-sensitive PNIPAM inside corona

977

Fabrication of an asymmetric polyimide hollow fiber with a defect-free surface skin layer

978

Fabrication of an eco-friendly composite nanogenerator for self-powered photosensor applications

979

Fabrication of an Eficient Antioxidant Capacity Assay Using Peroxidase-mimicking Trivalent DNAzyme

980

Fabrication of an electrically conductive mixed self-assembled monolayer and its application in an electrochemical immunosensor

981

Fabrication of an electrically conductive mixed self-assembled monolayer and its application in an electrochemical immunosensor

982

Fabrication of an electrochemical cell based on Rhodamine B Dye for low power applications

983

Fabrication of an Electrochemical Immunosensor for Determination of Human Chorionic Gonadotropin Based on PtNPs/Cysteamine/AgNPs as an Efficient Interface

984

Fabrication of an electrochemical immunosensor with self-assembled peptide nanotubes

985

Fabrication of an Electrochemical Sensor Based on a New Nano-ion Imprinted Polymer for Highly Selective and Sensitive Determination of Molybdate

986

Fabrication of an electrochemical sensor based on computationally designed molecularly imprinted polymers for determination of cyanazine in food samples Original Research Article

987

Fabrication of an Implant-Supported Orbital Prosthesis with Bar-Magnetic Attachment: A Clinical Report

988

Fabrication of an integrated microfluidic device based on a heat-sensitive poly(N-isopropylacrylamide) polymer and micromachining protocols for programmed bio-molecular patterning

989

Fabrication of an integrated optical Mach–Zehnder interferometer based on refractive index modification of polymethylmethacrylate by krypton fluoride excimer laser radiation

990

Fabrication of an integrated ΔE-E-silicon detector by wafer bonding using cobalt disilicide

991

Fabrication of an integrated ΔE-E-silicon detector by wafer bonding using cobalt disilicide

992

Fabrication of an intelligent superhydrophobic surface based on ZnO nanorod arrays with switchable adhesion property

993

Fabrication of an iron(III) PVC-membrane sensor based on bis-benzilthiocarbohydrazide as a selective sensing material

994

Fabrication of an Isoqrid fan Containment case

995

Fabrication of an Isoqrid fan Containment case

996

Fabrication of an ITER middle-scaled shielding blanket module mock-up

997

Fabrication of an optically transparent super-hydrophobic surface via embedding nano-silica

998

Fabrication of an optimized fluorescer encapsulated polymer coated gelatin nanoparticle and study of its retarded release properties

999

Fabrication of an organic light-emitting diode (OLED) from a two-dimensional lead(II) coordination polymer

1000

Fabrication of an organic thin-film transistor by direct deposit of a pentacene layer onto a silicon substrate Original Research Article

بازگشت