<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Mechanical properties anisotropy of cold rolled and solution annealed Ni–20Cr–8Fe alloy
2
Mechanical properties as a function of microstructure and solidification thermal variables of Al–Si castings
3
Mechanical properties as a function of microstructure in the new Mg–Al–Ca–La alloy solidified under different conditions
4
Mechanical properties as a function of thermal parameters and microstructure of Zn–Al castings
5
Mechanical properties at elevated temperature of a hot-deformed Mg–Al–Ca–Mn–Sr alloy
6
Mechanical properties at elevated temperatures in superplastically-deformed, nanodispersion strengthened aluminum
7
Mechanical properties at nanometric scale of alumina layers formed in sulphuric acid anodizing under burning conditions
8
Mechanical properties at sub-microscale and macroscale of polycrystalline uranium mononitride
9
Mechanical properties at the nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells Original Research Article
10
Mechanical Properties Characterization of Biax and Triax Composites Based on Limited Experimental Data
11
Mechanical properties determined by nanoindentation tests of polypropylene modified by He+ particle implantation
12
Mechanical properties determined by nanoindentation tests of polypropylene modified by He+ particle implantation
13
Mechanical properties enhancement in Ti–29Nb–13Ta–4.6Zr alloy via heat treatment with no detrimental effect on its biocompatibility
14
Mechanical properties enhancement of carbon/carbon composites by in situ grown carbon nanofibers
15
Mechanical properties evaluation of chromized tungsten carbide–cobalt hardmetals
16
Mechanical Properties Evaluation of Functionally Layered Cement Composites
17
Mechanical properties evaluation of new composites with protein biofibers reinforcing poly(methyl methacrylate)
18
Mechanical properties evolution during post-welding-heat treatments of double-lap Friction Stir Welded joints
19
Mechanical properties for bulk metallic glass with crystallites precipitation and second ductile phase addition
20
Mechanical properties for preliminary design of structures made from PVC coated fabric
21
Mechanical properties improvement and bone regeneration of calcium phosphate bone cement, Polymethyl methacrylate and glass ionomer
22
Mechanical properties improvement of cast AZ80 Mg alloy/nano-particles composite via thermomechanical processing
23
Mechanical properties improvement of pulsed laser-deposited hydroxyapatite thin films by high energy ion-beam implantation
24
Mechanical properties in long bones of rat osteopetrotic mutations
25
Mechanical properties in relation to vehicle mobility of Sepang peat terrain in Malaysia
26
Mechanical properties in the semi-solid state and hot tearing of aluminium alloys
27
Mechanical properties investigation of carbon/carbon composites fabricated by a fast densification process
28
Mechanical properties measured by nano-indentation of Pb(Zr, Ti)03 sol–gel films deposited on Pt and LaNi03 electrodes
29
Mechanical properties modeling of recycled aggregate concrete
30
Mechanical Properties of (Aloe vera L.) Leaf for Designing Gel Extraction Machines
31
Mechanical properties of (Nd,Dy)–Fe–B magnets sintered via cyclic sintering
32
Mechanical properties of (Ti,Cr)N coatings deposited by inductively coupled plasma assisted direct current magnetron sputtering
33
Mechanical properties of (Ti2AlC+Ti3AlC)–TiAl ceramic–intermetallic laminate (CIL) composites
34
Mechanical properties of (α + β)-titanium alloy at cryogenic temperatures
35
Mechanical properties of (α + β)-titanium alloy at cryogenic temperatures
36
Mechanical properties of 17-4PH stainless steel foam panels
37
Mechanical properties of 17-4PH stainless steel foam panels
38
Mechanical properties of 2.45 GHz microwave sintered Si3N4–Y2O3–MgO–ZrO2 system
39
Mechanical properties of 304L stainless steel SMAW joints under dynamic impact loading
40
Mechanical properties of 3D fiber reinforced C/SiC composites
41
Mechanical properties of 3D fiber reinforced C/SiC composites
42
Mechanical properties of 3D KD-I SiCf/SiC composites with engineered fibre–matrix interfaces
43
Mechanical Properties of 5052/2017 Dissimilar Aluminum Alloys Deposit by Friction Surfacing
44
Mechanical properties of 8Cr–2WVTa steel aged for 30 000 h
45
Mechanical properties of 9Cr martensitic steels and ODS-FeCr alloys after neutron irradiation at 325 °C up to 42 dpa
46
Mechanical properties of 9Cr–1W reduced activation ferritic martensitic steel weldment prepared by electron beam welding process
47
Mechanical properties of a 316L/T91 weld joint tested in lead–bismuth liquid
48
Mechanical properties of a 3D needled C/SiC composite with graphite filler
49
Mechanical properties of a bi-continuous Cu–Cr3C2 composite
50
Mechanical properties of a carbon fiber reinforced self-healing multilayered matrix composite at elevated temperatures
51
Mechanical properties of a co-extruded Metallic Glass/Alloy (MeGA) rod—Effect of the metallic glass volume fraction
52
Mechanical properties of a Cr–Ni–Mo–Al–Ti maraging steel in the process of martensitic transformation
53
Mechanical properties of a Cr–Ni–Mo–Al–Ti maraging steel in the process of martensitic transformation
54
Mechanical properties of a degradable phosphate glass fibre reinforced polymer composite for internal fracture fixation
55
Mechanical properties of a density-graded replicated aluminum foam
56
Mechanical properties of a forged Fe–25Al–2Ta steam turbine blade
57
Mechanical properties of a fully dense polymer derived ceramic made by a novel pressure casting process Original Research Article
58
Mechanical properties of a giant liposome studied using optical tweezers
59
Mechanical properties of a graded B–C–N sputtered coating with varying Youngʹs modulus: deposition, theoretical modelling and nanoindentation
60
Mechanical properties of a high-strength cupronickel alloy-Bayesian neural network analysis
61
Mechanical properties of a high-strength cupronickel alloy-Bayesian neural network analysis
62
Mechanical properties of a hollow-cylindrical-joint honeycomb
63
Mechanical properties of a laminin–apatite composite layer formed on an ethylene–vinyl alcohol copolymer
64
Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab
65
Mechanical properties of a lithium glass–ceramic matrix (LZSA) reinforced with TiC or (W,Ti)C particles: A preliminary study
66
Mechanical properties of a medical β-type titanium alloy with specific microstructural evolution through high-pressure torsion
67
Mechanical properties of a Mg–10 (vol.%)Ti composite
68
Mechanical properties of a new electrorheological fluid
69
Mechanical properties of a new thermoplastic polymer orthodontic archwire
70
Mechanical properties of a Ni60Pd20P17B3 bulk glassy alloy at cryogenic temperatures
71
Mechanical properties of a novel PVA hydrogel in shear and unconfined compression
72
Mechanical properties of a porcine aortic valve fixed with a naturally occurring crosslinking agent
73
Mechanical properties of a powder metallurgically processed Mg–5Y–6Re alloy
74
Mechanical properties of a powder metallurgically processed Mg–5Y–6Re alloy
75
Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells
76
Mechanical properties of a silicon nanofilm covered with defective graphene
77
Mechanical properties of a silty clay subjected to freezing–thawing
78
Mechanical properties of a spray deposited bearing steel
79
Mechanical properties of a spray deposited bearing steel
80
Mechanical properties of a Ti15V3Cr3Sn3Al alloy affected by the impurity hydrogen
81
Mechanical properties of a Ti15V3Cr3Sn3Al alloy affected by the impurity hydrogen
82
Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting
83
Mechanical properties of a two-phase alloy Mg–8%Li–1%Al processed by equal channel angular pressing
84
Mechanical properties of a two-phase alloy Mg–8%Li–1%Al processed by equal channel angular pressing
85
Mechanical properties of a waterproofing adhesive layer used on concrete bridges under heavy traffic and temperature loading
86
Mechanical properties of a ZrC-dispersed Mo alloy processed by mechanical alloying and spark plasma sintering
87
Mechanical properties of a ZrC-dispersed Mo alloy processed by mechanical alloying and spark plasma sintering
88
Mechanical properties of a-C:H/Si-containing a-C:H multilayered coatings grown by LF-PECVD
89
Mechanical properties of acid sodium caseinate-κ-carrageenan gels: effect of co-solute addition
90
Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive
91
Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire
92
Mechanical properties of adhesives for bonding wood—A review
93
Mechanical properties of adobe bricks in ancient constructions
94
Mechanical properties of advanced active-TIG welded duplex stainless steel and ferrite steel
95
Mechanical properties of advanced SiC fiber composites irradiated at very high temperatures
96
Mechanical properties of advanced SiC/SiC composites after neutron irradiation
97
Mechanical properties of aerogel composites for casting purposes
98
Mechanical properties of AgCo nanostructured nanowires Original Research Article
99
Mechanical properties of agglomerates
100
Mechanical properties of Ag-Ni super-laminates produced by rolling
101
Mechanical properties of Ag-Ni super-laminates produced by rolling
102
Mechanical properties of Al based alloys containing quasi-crystalline phase as a main component
103
Mechanical properties of Al based alloys containing quasi-crystalline phase as a main component
104
Mechanical properties of Al based amorphous and devitrified alloys containing different rare earth elements
105
Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures Original Research Article
106
Mechanical properties of Al/Al2O3 nanolaminated films: correlation to microstructure
107
Mechanical properties of Al–2.5 Mg–0.1 Mn–Si–Cr–Fe alloys
108
Mechanical properties of Al2O3/ZrO2 composites
109
Mechanical properties of Al2O3–Cr2O3/Cr3C2 nanocomposite fabricated by spark plasma sintering
110
Mechanical properties of Al2O3–TiC–TiN ceramic tool materials Review Article
111
Mechanical properties of Al4SiC4 bulk ceramics produced by solid state reaction
112
Mechanical properties of Al-based amorphous/nanocrystalline alloys
113
Mechanical properties of Al-based amorphous/nanocrystalline alloys
114
Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy Original Research Article
115
Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method
116
Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials II. Sisal fibres
117
Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials. I. hemp fibres
118
Mechanical properties of Al-Li-Cu icosahedral quasicrystals
119
Mechanical properties of Al-Li-Cu icosahedral quasicrystals
120
Mechanical properties of alloys consisting of two ductile phases
121
Mechanical properties of Al–Mg–Si alloy sheets produced using asymmetric cryorolling and ageing treatment
122
Mechanical properties of AlN-polytypoids – 15R, 12H and 21R
123
Mechanical properties of AlN-polytypoids – 15R, 12H and 21R
124
Mechanical properties of Al–Si13–Ni1.4–Mg1.4–Cu1 alloys produced by the Ohno continuous casting process
125
Mechanical properties of AlSiCu alloys produced by the twin rolled continuous casting process
126
Mechanical properties of alumina fiber/glass matrix composites with and without a tin dioxide interface
127
Mechanical properties of alumina fiber/glass matrix composites with and without a tin dioxide interface
128
Mechanical properties of alumina Nextel™ 720 fibres at room and elevated temperatures: tensile bundle testing
129
Mechanical Properties of Alumina Trihydrate Filled Polypropylene/Ethylene Propylene Diene Monomer Composites for Cable Applications
130
Mechanical properties of alumina-rich magnesium aluminate spinel/tungsten composites
131
Mechanical properties of alumina–zirconia–Nb micro–nano-hybrid composites
132
Mechanical properties of aluminide matrix composites fabricated by reactive hot-pressing in several environments
133
Mechanical properties of aluminium alloys processed by SPD: Comparison of different alloy systems and possible product areas
134
Mechanical properties of aluminium foam derived from infiltration casting of salt dough
135
Mechanical properties of aluminized CoCrAlY coatings in advanced gas turbine blades
136
Mechanical properties of aluminized CoCrAlY coatings in advanced gas turbine blades
137
Mechanical properties of aluminum matrix composites reinforced with sintered ferrous compacts
138
Mechanical properties of aluminum matrix composites reinforced with sintered ferrous compacts
139
Mechanical properties of aluminum tailor welded blanks at superplastic temperatures
140
Mechanical properties of aluminum/quartz particulate composites cast using metallic and non-metallic chills
141
Mechanical properties of amorphous alloys ribbons prepared by rapid quenching of the melt after different thermal treatments before quenching
142
Mechanical properties of amorphous alloys ribbons prepared by rapid quenching of the melt after different thermal treatments before quenching
143
Mechanical properties of amorphous and partially crystallized Y50Cu42Al8 alloys
144
Mechanical properties of amorphous Fe-based melt spun ribbons with Cr additions
145
MECHANICAL PROPERTIES OF AMORPHOUS SILICA FILLED RSS1
146
Mechanical properties of amorphous Ta100 − xCrx thin films
147
Mechanical properties of amorphous Ta100 − xCrx thin films
148
Mechanical properties of an Al91–Mn6–Nd3 nanostructured alloy
149
Mechanical properties of an experimental denture soft lining material
150
Mechanical properties of an ultrafine grained C-Mn steel processed by warm deformation and annealing
151
Mechanical properties of an ultrafine grained C–Mn steel processed by warm deformation and annealing Original Research Article
152
Mechanical properties of anatase and semi-metallic TiO2 nanotubes Original Research Article
153
Mechanical properties of anisotropic conductive film with strain rate and temperature
154
Mechanical properties of ANTRIX balloon film and fabrication of single cap large volume balloons Original Research Article
155
Mechanical Properties of Arc Welding Heat-Affected Zone of High Nitrogen Steel Original Research Article
156
Mechanical properties of arc-evaporated CrN coatings.: Part II: intrinsic film hardness and composite hardness
157
Mechanical properties of arc-evaporated CrN coatings: Part I — nanoindentation hardness and elastic modulus
158
Mechanical properties of arteries cryopreserved at −80 °C and −150 °C
159
Mechanical properties of artificial tracheas composed of a mesh cylinder and a spiral stent
160
Mechanical properties of as-cast microalloyed steels produced via investment casting
161
Mechanical properties of as-forged Ni-free Co–29Cr–6Mo alloys with ultrafine-grained microstructure
162
Mechanical properties of attapulgite clay reinforced polyurethane shape-memory nanocomposites
163
Mechanical properties of bacterial cellulose and interactions with smooth muscle cells
164
Mechanical properties of bagasse fiber filled polypropylene composites
165
Mechanical properties of barrier-type anodic alumina films using nanoindentation
166
Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading
167
Mechanical properties of BaTiO3 open-porosity foams
168
Mechanical properties of B–C–N films synthesized by an electron beam excited plasma-CVD method
169
Mechanical properties of beating pulp and paper from rice straw
170
Mechanical properties of biaxial weft-knitted flax composites
171
Mechanical properties of bilayer graphene sheets coupled by sp3 bonding Original Research Article
172
Mechanical properties of bioactive amorphous calcium phosphate/methacrylate composites
173
Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair
174
Mechanical properties of bioactive glass 9-93 fibres
175
Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)
176
Mechanical properties of bioinspired bicontinuous nanocomposites
177
Mechanical properties of biological gels
178
Mechanical properties of biomedical titanium alloys
179
Mechanical properties of biomedical titanium alloys
180
Mechanical Properties of Blends of Low-Density Polyethylene with Chlorinated Polyethylene
181
Mechanical properties of blends of maleated ethylene–propylene rubber and nylon 6
182
Mechanical Properties of Boron and Kevlar-49 Reinforced Thermosetting Composites and Economic Implications
183
Mechanical properties of boron nitride films prepared by plasma-enhanced chemical vapor deposition
184
Mechanical properties of boronized AISI W4 steel
185
Mechanical properties of bovine cortical bone at high strain rate
186
Mechanical properties of BPDA–ODA polyimide fibers
187
Mechanical properties of brain tissue by indentation: Interregional variation
188
Mechanical properties of brain tissue in tension
189
Mechanical properties of brain tissue in-vivo: experiment and computer simulation
190
Mechanical properties of bread crumbs from tomography based Finite Element simulations
191
Mechanical properties of brick aggregate concrete
192
Mechanical properties of bulk aluminium consolidated from mechanically milled particles by back pressure equal channel angular pressing
193
Mechanical properties of bulk and nanoscale TiO2 phases Original Research Article
194
Mechanical properties of bulk and nanostructured La0.61Sr0.39MnO3 perovskite manganite materials Original Research Article
195
Mechanical properties of bulk metallic glasses
196
Mechanical properties of bulk metallic glasses: Elastic, visco-elastic and visco-plastic components in the deformation
197
Mechanical properties of bulk sintered titanium nitride ceramics
198
Mechanical properties of bulk sintered titanium nitride ceramics
199
Mechanical properties of BCN films deposited by dual cesium ion beam sputtering system
200
Mechanical properties of C58 materials and their dependence on thermal treatment
201
Mechanical properties of C60 single crystals
202
Mechanical properties of Ca3Co4O9 bulk oxides intended to be used in thermoelectric generators
203
Mechanical properties of calcified exoskeleton from the neotropical millipede, Nyssodesmus python
204
Mechanical properties of calcium alginate fibers produced with a microfluidic device
205
Mechanical properties of calcium phosphate coatings deposited by laser ablation
206
Mechanical properties of calcium-leached cement pastes: Triaxial stress states and the influence of the pore pressures
207
Mechanical properties of callus in human tibial fractures: a preliminary investigation
208
Mechanical properties of CaN, SrN, and BaN compounds by density functional theory
209
Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic
210
Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic
211
Mechanical properties of cancellous bone of the distal humerus
212
Mechanical properties of carbon fiber reinforced epoxy/clay nanocomposites
213
Mechanical properties of carbon fiber/fullerene-dispersed epoxy composites
214
Mechanical properties of carbon nanofiber/fiber-reinforced hierarchical polymer composites manufactured with multiscale-reinforcement fabrics Original Research Article
215
Mechanical properties of carbon nanoparticle-reinforced elastomers
216
Mechanical properties of carbon nanoparticle-reinforced elastomers
217
Mechanical properties of carbon nanotube by molecular dynamics simulation
218
Mechanical properties of carbon nanotube paper in ionic liquid and aqueous electrolytes Original Research Article
219
Mechanical properties of carbon nanotube reinforced Epoxy Resin composites
220
Mechanical properties of carbon nanotubes: a fiber digest for beginners Original Research Article
221
Mechanical properties of carbon—carbon composite components determined using nanoindentation Original Research Article
222
Mechanical properties of carbon-doped TIN films by ion beam irradiation in ethylene gas atmosphere
223
Mechanical properties of carbon-fibre reinforced silicate matrix composites
224
Mechanical properties of carrot fiber - epoxy composite
225
Mechanical properties of cast A356 alloy, solidified at cooling rates enhanced by phase transition of a cooling medium
226
Mechanical properties of cBN–Al composite materials
227
Mechanical properties of cellular ceramics obtained by gel casting: Characterization and modeling
228
Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion
229
Mechanical properties of cement-treated aggregate material – A review
230
Mechanical properties of ceramic bodies based on calcite waste
231
Mechanical properties of ceramic composites
232
Mechanical properties of ceramic matrix composites with siloxane matrix and liquid phase coated carbon fiber reinforcement
233
Mechanical properties of ceramic–metal composites by pressure infiltration of metal into porous ceramics
234
Mechanical properties of ceramic–metal composites by pressure infiltration of metal into porous ceramics
235
Mechanical properties of ceramics–cement based porous material under impact loading
236
Mechanical properties of cerium and a cerium–5 wt% lanthanum alloy by nanoindentation and ultrasonic velocity measurements
237
Mechanical properties of cermet composites with various geometrical tortuosity of metal phase: Fractal characterization
238
Mechanical properties of chitosan/bamboo charcoal composite films made with normal and surface oxidized charcoal
239
Mechanical properties of chitosan/bamboo charcoal composite films made with normal and surface oxidized charcoal
240
Mechanical Properties of Chopped E-Glass Fiber Reinforced Epoxy Resin
241
Mechanical Properties of Clayey Sand Treated with Cement-Rubbershreds
242
Mechanical properties of closed lamellar membranes and cellular processes Original Research Article
243
Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams
244
Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study
245
Mechanical properties of coated materials and multi-layered composites determined using bending methods
246
Mechanical properties of coir pith particle board
247
Mechanical properties of Cold Spray deposited NARloy-Z copper alloy
248
Mechanical properties of cold-formed steels at elevated temperatures
249
Mechanical properties of cold-sprayed and thermally sprayed copper coatings
250
Mechanical properties of collagen fascicles from in situ frozen and stress-shielded rabbit patellar tendons
251
Mechanical properties of collagen fascicles from stress-shielded patellar tendons in the rabbit
252
Mechanical properties of commercial high strength ceramic core materials
253
Mechanical properties of compacted morselized cancellous bone graft using one-dimensional consolidation testing
254
Mechanical properties of composite gels consisting of fractionated whey proteins and fractionated milk fat
255
Mechanical properties of composite structures fabricated with the vacuum induced preform relaxation process
256
Mechanical properties of composites filled with SMA particles and short fibers
257
Mechanical properties of concrete cast in fabric formworks
258
Mechanical properties of concrete containing a high volume of tire–rubber particles
259
Mechanical properties of concrete containing Fly Ash, Rice Husk Ash and Waste Glass Powder
260
Mechanical Properties of Concrete Containing Polyethylene Terephthalate, Rubber and Glass Wastes
261
Mechanical Properties of Concrete Containing River Indus Sand and Recyclable Concrete Aggregate
262
Mechanical properties of concrete containing waste glass powder and rice husk ash
263
Mechanical properties of concrete elaborated with igneous aggregates
264
Mechanical properties of concrete produced with a composite of water treatment sludge and sawdust
265
Mechanical properties of concrete produced with recycled coarse aggregates – Influence of the use of superplasticizers
266
Mechanical properties of concrete with recycled coarse aggregate
267
Mechanical properties of concrete-reinforced fibres and powders with crushed thermoset composites: The influence of fibre/matrix interaction
268
Mechanical properties of confined recycled aggregate concrete under axial compression
269
Mechanical properties of constitutive parameters in steel–concrete interface
270
Mechanical properties of contemporary resin composites determined by nanoindentation
271
Mechanical properties of conventional and self-compacting concrete: An analytical study
272
Mechanical properties of copper after compression stage of high-pressure torsion
273
Mechanical properties of copper slag reinforced concrete under dynamic compression
274
Mechanical properties of copper/carbon nanocomposite films formed by microwave plasma assisted deposition techniques from argon–methane and argon–acetylene gas mixtures
275
Mechanical properties of copper-coated carbon foams Original Research Article
276
Mechanical properties of coronary stents determined by using finite element analysis
277
Mechanical properties of cross-linked polymer particles prepared by nitroxide-mediated radical polymerization in aqueous micro-suspension
278
Mechanical properties of cryogenic epoxy adhesives: Effects of mixed curing agent content
279
Mechanical properties of crystalline Cu/Zr and crystal–amorphous Cu/Cu–Zr multilayers
280
Mechanical properties of Cu/Ag multilayered composites
281
Mechanical properties of Cu/Ag multilayered composites
282
Mechanical properties of cubic zirconia irradiated with swift heavy ions
283
Mechanical properties of Cu–Cr system alloys with and without Zr and Ag
284
Mechanical properties of cyanate ester/epoxy nanocomposites modified with plasma functionalized MWCNTs
285
Mechanical properties of cyclically-damaged structural mild steel at elevated temperatures
286
Mechanical properties of cyromilled nanocrystalline Zn studied by the miniaturized disk bend test Original Research Article
287
Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate
288
Mechanical properties of defective γ-graphyne using molecular dynamics simulations
289
Mechanical properties of delta-stabilized Pu–1.0 wt% Ga alloys
290
Mechanical properties of dense to porous alumina/lanthanum hexaaluminate composite ceramics
291
Mechanical Properties of Dental Composite Materials Reinforced With Micro and Nano-Size Al2O3 Filler Particles
292
Mechanical properties of dental resin composites by co-filling diatomite and nanosized silica particles
293
Mechanical properties of dental resin/composite containing urchin-like hydroxyapatite
294
Mechanical properties of dental tissues in dolphins (Cetacea: Delphinoidea and Inioidea)
295
Mechanical properties of denture base resin cross-linked with methacrylated dendrimer
296
Mechanical properties of deposited carbon thin films on sapphire substrates using atomic force microscopy (AFM)
297
Mechanical properties of dewatered sewage sludge
298
Mechanical properties of diamond/Al composites with Ti-coated diamond particles produced by gas-assisted pressure infiltration
299
Mechanical properties of diamond-like carbon composite thin films prepared by pulsed laser deposition
300
Mechanical properties of direct core build-up materials
301
Mechanical properties of directionally freeze-cast titanium foams Original Research Article
302
Mechanical properties of directionally solidified Al2O3–ZrO2(Y2O3) eutectics
303
Mechanical properties of directionally solidified Al2O3–ZrO2(Y2O3) eutectics
304
Mechanical properties of directionally solidified Nb–Mo–Si-based alloys with aligned Nbss/Nb5Si3 lamellar structure
305
Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B
306
Mechanical properties of DLC coating sputter deposited on surface nanocrystallized 304 stainless steel
307
Mechanical properties of double-layered graphene sheets
308
Mechanical properties of dual multi-phase single-crystal intermetallic alloy composed of geometrically close packed Ni3X (X: Al and V) type structures
309
Mechanical properties of duplex layer formed on AISI 403 stainless steel by chromizing and boronizing treatment
310
Mechanical properties of EB-PVD-thermal barrier coatings by nanoindentation
311
Mechanical properties of elastin along the thoracic aorta in the pig
312
Mechanical properties of elastomeric composite membranes made from the porous biaxially drawn ultrahigh-molecular-weight polyethylene film and polyether polyurethane materials
313
Mechanical properties of electrically conductive silicon carbide ceramics
314
Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests
315
Mechanical Properties of Electrophoretically Deposited 45S5 BioglassGraphene Oxide Composite Coatings
316
Mechanical properties of electrospun bilayer fibrous membranes as potential scaffolds for tissue engineering
317
Mechanical properties of electrospun collagen–chitosan complex single fibers and membrane
318
Mechanical properties of electrospun fibrinogen structures
319
Mechanical properties of electrospun PMMA micro-yarns: Effects of NaCl mediation and yarn twist
320
Mechanical properties of elytra from Tribolium castaneum wild-type and body color mutant strains
321
Mechanical properties of Epoxy - polyurethane polymer blends
322
Mechanical properties of epoxy composites reinforced with a low volume fraction of nanosilica fillers
323
Mechanical properties of epoxy composites with high contents of nanodiamond
324
Mechanical properties of epoxy-based composites using coiled carbon nanotubes
325
Mechanical properties of epoxy-based composites using nanoclays
326
Mechanical properties of equal channel angular pressed powder extrudates of a rapidly solidified hypereutectic Al-20 wt% Si alloy
327
Mechanical properties of ETFE foils: Testing and modelling
328
Mechanical properties of ethylene/1-hexene copolymers with tailored short chain branching distributions
329
Mechanical properties of Eurofer 97 in Pb–16Li and irradiation effect
330
Mechanical Properties of Ewe Vertebral Cancellous Bone Compared With Histomorphometry and High-Resolution Computed Tomography Parameters
331
Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick
332
Mechanical properties of experimental dental composites containing a combination of mesoporous and nonporous spherical silica as fillers
333
Mechanical Properties of Extruded High Density Polyethylene and Polypropylene Wood Flour Decking Boards.
334
Mechanical properties of F82H/316L and 316L/316L welds upon the target back-plate of IFMIF
335
Mechanical properties of fcc/fcc Cu/Nb nanostructured multilayers
336
Mechanical properties of Fe3Al/Al2O3 composite graded coatings
337
Mechanical properties of Fe3Al-based alloys with addition of carbon, niobium and titanium
338
Mechanical properties of Fe70Al30 single crystals investigated by in situ straining experiments in a TEM
339
Mechanical properties of Fe70Al30 single crystals investigated by in situ straining experiments in a TEM
340
Mechanical properties of Fe–Al–M–C (M=Ti, V, Nb, Ta) alloys with strengthening carbides and Laves phase
341
Mechanical properties of FeB and Fe2B layers estimated by Berkovich nanoindentation on tool borided steel
342
Mechanical properties of Fe-based composites reinforced with multi-walled carbon nanotubes
343
Mechanical Properties of Feed Pellets: Weibull Analysis
344
Mechanical Properties of Fe-Mn-Si Based SMA and the Application
345
Mechanical properties of Fe–Ni–Cr–Si–B bulk glassy alloy
346
Mechanical properties of ferrofluid applications: Centering effect and capacity of a seal
347
Mechanical properties of FeSi (ε), FeSi2 (ζα) and Mg2Si
348
Mechanical properties of fiber reinforced styrene–butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation
349
Mechanical properties of fibrous core sandwich panels
350
Mechanical properties of fibrous core sandwich panels
351
Mechanical properties of fibrous core sandwich panels
352
Mechanical properties of fibrous monolithic Si3N4/BN ceramics with different cell boundary thicknesses
353
Mechanical properties of filled antimonide skutterudites
354
Mechanical properties of fine-crystalline two-phase materials
355
Mechanical properties of fine-crystalline two-phase materials
356
Mechanical Properties of Fired Clay-Perlite as Composite Material
357
Mechanical properties of flame sprayed free-standing coatings
358
Mechanical properties of fluorozirconate-based glass ceramics for medical and photovoltaic applications
359
MECHANICAL PROPERTIES OF FLY ASH REINFORCED ALUMINIUM ALLOY (Al6061) COMPOSITES
360
Mechanical properties of foamed concrete exposed to high temperatures
361
Mechanical properties of foods responsible for resisting food breakdown in the human mouth
362
Mechanical properties of friction stir butt welds of high nitrogen-containing austenitic stainless steel
363
Mechanical properties of friction welds of RAFs (JLF-1) to SUS304 steels as measured by the acoustic emission technique
364
Mechanical properties of fruit-cuticular membranes isolated from 27 cultivars of Diospyros kaki Thunb.
365
Mechanical properties of full austenitic welding joint at cryogenic temperature for the ITER toroidal field coil structure
366
Mechanical properties of fully hydrogenated graphene sheets
367
Mechanical properties of fully porous and porous-surfaced Ti–6Al–4V implants fabricated by electro-discharge-sintering
368
Mechanical properties of functionally graded 2-D cellular structures: A finite element simulation
369
Mechanical properties of functionally graded hierarchical bamboo structures
370
Mechanical properties of gamma irradiated morselized bone during compaction
371
Mechanical properties of gas pressure sintered Si3N4/SiC nanocomposites
372
Mechanical properties of Gd123 bulk superconductors at room temperature Original Research Article
373
Mechanical properties of gelatin films cross-linked, respectively, by ferulic acid and tannin acid
374
Mechanical properties of gelatin-rich micro-particles Original Research Article
375
Mechanical properties of gellan and gelatin composite films
376
Mechanical properties of gels formed by mixtures of mucilage gum (Opuntia ficus indica) and carrageenans
377
Mechanical properties of glass fiber reinforced ceramic concrete
378
Mechanical properties of glass fiber-reinforced endodontic posts
379
Mechanical properties of glass fibre reinforced polypropylene disks produced by rotating, expansion and compression injection moulding
380
Mechanical properties of glass ionomer cements affected by curing methods
381
Mechanical properties of glass ionomers under static and dynamic loading
382
Mechanical properties of glass-ceramic A–W-polyethylene composites: effect of filler content and particle size
383
Mechanical properties of glasses and TiO2 nanocrystal glass composites in BaO–TiO2–B2O3 system
384
Mechanical properties of gold nanometric films onto a polymeric substrate
385
MECHANICAL PROPERTIES OF GRANULAR AGRICULTURAL MATERIALS, PART 2
386
MECHANICAL PROPERTIES OF GRANULAR MATERIALS AND THEIR IMPACT ON LOAD DISTRIBUTION IN SILO: A REVIEW
387
Mechanical properties of graphene based nanocomposites incorporating a hybrid interphase
388
Mechanical properties of graphene papers
389
Mechanical properties of graphene platelet-reinforced alumina ceramic composites
390
Mechanical properties of graphene under molecular hydrogen physisorption: An ab initio study
391
Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings
392
Mechanical properties of graphene: Effects of layer number, temperature and isotope
393
Mechanical properties of graphite flakes and spherulites measured by nanoindentation
394
Mechanical properties of graphyne and its family – A molecular dynamics investigation
395
Mechanical properties of graphyne Original Research Article
396
Mechanical properties of ground state structures in substitutional ordered alloys: High strength, high ductility and high thermal stability
397
Mechanical properties of HAp–ZrO2 composites
398
Mechanical properties of hard AlCrN-based coated substrates
399
Mechanical properties of hard chromium tungsten nitride coatings
400
Mechanical properties of hard Cr–MWNT composite coatings
401
Mechanical properties of heat-treated wooden material utilized in the construction of outdoor sitting furniture
402
Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction
403
Mechanical properties of hexadecane–water interfaces with adsorbed hydrophobic bacteria
404
Mechanical properties of hexagonal boron nitride synthesized from ®lm of Cu/BN mixture by surface segregation
405
Mechanical properties of hierarchical cellular materials. Part I: Analysis
406
Mechanical properties of high carbon Fe3Al-based intermetallic alloys
407
Mechanical properties of high carbon Fe3Al-based intermetallic alloys
408
Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: Impact of chemical treatments
409
Mechanical properties of high density polyethylene/carbon nanotube composites
410
Mechanical properties of high density polyurethane foams: I. Effect of the density
411
Mechanical properties of high density polyurethane foams: II Effect of the filler size
412
Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres
413
Mechanical properties of high strength flowing concrete with hybrid fibers
414
Mechanical properties of high-density diamond like carbon (HD-DLC) films prepared using filtered arc deposition
415
Mechanical Properties of High-Density Polyethylene/Chlorinated Polyethylene Blends
416
Mechanical properties of highly porous PDLLA/Bioglass® composite foams as scaffolds for bone tissue engineering
417
Mechanical properties of highly porous PEEK bionanocomposites incorporated with carbon and hydroxyapatite nanoparticles for scaffold applications
418
Mechanical properties of highly textured Cu/Ni multilayers Original Research Article
419
Mechanical properties of highly textured porous Ni–YSZ and Co–YSZ cermets produced from directionally solidified eutectics
420
Mechanical properties of high-nickel alloys EP-753 and РЕ-16 after neutron irradiation to 54 dpa at 400–650 °С
421
Mechanical properties of high-strength carbon fibres. Validation of an end-effect model for describing experimental data Original Research Article
422
Mechanical properties of high-strength concrete after fire
423
Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate
424
Mechanical properties of high-strength steel fiber-reinforced concrete
425
Mechanical properties of high-volume fly ash roller compacted concrete designed by maximum density method
426
Mechanical properties of Hi-Nicalon fiber-reinforced celsian composites after high-temperature exposures in air
427
Mechanical properties of HIP bonded W and Cu-alloys joint for plasma facing components
428
Mechanical properties of hot isostatic pressed type 316LN steel after irradiation
429
Mechanical properties of hot isostatic pressed type 316LN steel after irradiation to 2.5 dpa
430
Mechanical properties of hot isostatically pressed nanograin iron and iron alloy powders
431
Mechanical properties of hot isostatically pressed zirconia (2 mol% yttria)-reinforced molybdenum disilicide composite
432
Mechanical Properties of Hot Rolled Ribbed and Plain Steel Rods
433
Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion
434
Mechanical properties of hot-pressed Al2O3/SiC composites
435
Mechanical properties of hot-pressed Al-4.5 wt. % Cu/WC composite
436
Mechanical properties of hot-pressed ZrB2–MoSi2–SiC composites
437
Mechanical properties of hot-pressed ZrO2 reinforced with (W,Ti)C and Al2O3 additions
438
Mechanical properties of hub/shaft joints adhesively bonded and cured under hydrostatic pressure
439
Mechanical properties of human dental enamel on the nanometre scale
440
Mechanical properties of human saphenous veins from normotensive and hypertensive patients
441
Mechanical properties of human stratum corneum: Effects of temperature, hydration, and chemical treatment
442
Mechanical properties of hyaline and repair cartilage studied by nanoindentation
443
Mechanical properties of hybrid fabrics in pultruded cement composites
444
Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice
445
Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction
446
Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam
447
Mechanical properties of hybrid nanocrystalline metal foams Original Research Article
448
Mechanical properties of hybrid proton conducting polymer blends based on sulfonated polyetheretherketones
449
Mechanical properties of hydrogels and their experimental determination
450
Mechanical properties of hydrogen functionalized graphene allotropes
451
Mechanical properties of hydrogen functionalized graphene under shear deformation: A molecular dynamics study
452
Mechanical properties of hydroxyapatite ceramics sintered from powders with different morphologies
453
Mechanical properties of hydroxyapatite single crystals from nanoindentation data
454
Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds
455
Mechanical properties of hydroxyapatite whisker-reinforced bis-GMA-based resin composites
456
Mechanical properties of in situ Al2O3 formed Al–Si composite coating via atmospheric plasma spraying
457
Mechanical properties of in situ demineralised human enamel measured by AFM nanoindentation
458
Mechanical properties of in situ demineralised human enamel measured by AFM nanoindentation
459
Mechanical properties of in situ Fe3Al matrix composites fabricated by MA–PDS process
460
Mechanical properties of InAs/InP semiconductor alloys
461
Mechanical properties of Inconel 625 cold-sprayed coatings after laser remelting. Depth sensing indentation analysis
462
Mechanical properties of Inconel 625 laser cladded coatings: Depth sensing indentation analysis
463
Mechanical properties of individual electrospun PA 6(3)T fibers and their variation with fiber diameter
464
Mechanical properties of individual electrospun polymer-nanotube composite nanofibers Original Research Article
465
Mechanical properties of Indonesian-made narrow dynamic compression plate
466
Mechanical properties of InGaN thin films deposited by metal-organic chemical vapor deposition
467
Mechanical properties of injection molded hydroxyapatitepolyetheretherketone biocomposites
468
Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites
469
Mechanical properties of inorganic biomedical thin films and their corresponding testing methods
470
Mechanical properties of in-situ TiB2/A356 composites
471
Mechanical properties of in-situ toughened Al2O3/Fe3Al
472
Mechanical properties of intercalated cyanate ester–layered silicate nanocomposites
473
Mechanical properties of interfaces within a flax bundle – Part I: Experimental analysis
474
Mechanical properties of interfaces within a flax bundle—Part II: Numerical analysis
475
Mechanical properties of interference thin films on colored stainless steel evaluated by depth-sensing nanoindentation
476
Mechanical properties of intermetallic phases in multi-component Al–Si alloys using nanoindentation
477
Mechanical properties of intrasynovial and extrasynovial tendon fascicles
478
Mechanical properties of ion beam deposited carbon films Original Research Article
479
Mechanical properties of ion-implanted polycarbonate
480
Mechanical properties of iron powder filled high density polyethylene composites
481
Mechanical properties of iron-and nickel-base aluminides
482
Mechanical properties of iron-and nickel-base aluminides
483
Mechanical properties of irradiated 9Cr–2WVTa steel with and without nickel
484
Mechanical properties of irradiated ODS-EUROFER and nanocluster strengthened 14YWT
485
Mechanical properties of isolation bearings identified by a viscoelastic model
486
Mechanical properties of kenaf fiber reinforced concrete
487
Mechanical properties of L12 modified titanium trialuminides alloyed with chromium, iron and vanadium
488
Mechanical properties of L12 modified titanium trialuminides alloyed with chromium, iron and vanadium
489
Mechanical properties of La0.58Sr0.4Co0.2Fe0.8O3-δ membranes
490
Mechanical properties of La2O3 doped diamond-like carbon films
491
Mechanical properties of LaCoO3 based ceramics
492
Mechanical properties of LaFeO3 ceramics
493
Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods
494
Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods
495
Mechanical properties of lightweight aggregates
496
Mechanical Properties of Lightweight Oil Palm Geopolymer Concrete under Elevated Temperature
497
Mechanical properties of lime–hemp concrete containing shives and fibres
498
Mechanical properties of low alloy steel foams: Dependency on porosity and pore size
499
Mechanical properties of low modulus titanium alloys designed from the electronic approach
500
Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement
501
Mechanical Properties of Low Strength Concrete Incorporating Carbon Nanotubes
502
Mechanical properties of low temperature synthesized dense and fine-grained Cr2AlC ceramics
503
Mechanical properties of low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system
504
Mechanical properties of luffa sponge
505
Mechanical properties of magnesia-spinel composites
506
Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO·OH) by instrumented indentation and molecular dynamics analysis
507
Mechanical properties of mammalian and fish gelatins based on their weight average molecular weight and molecular weight distribution
508
Mechanical properties of martensitic steels after exposure to flowing liquid metals
509
Mechanical properties of masonry repair dolomitic lime-based mortars
510
Mechanical Properties of Materially and Geometrically Gradient Cellular Structures Manufactured with SLS 3D Printer Applicable as a Bone Implant
511
Mechanical properties of melamine formaldehyde microcapsules for self-healing materials
512
Mechanical properties of melt-grown Al2O3–ZrO2(Y2O3) eutectics with different microstructure
513
Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
514
Mechanical properties of metakaolin-based geopolymers with molar ratios of Si/Al & 2 and Na/Al & 1
515
Mechanical properties of metal-particulate lead-silicate glass matrix composites obtained by means of powder technology
516
Mechanical properties of Mg–Al–Ca alloy processed by hot extrusion
517
Mechanical properties of Mg–Al–Zn alloy with a tilted basal texture obtained by differential speed rolling
518
Mechanical properties of MgO–Al2O3–SiO2 glass-infiltrated Al2O3–ZrO2 composite
519
Mechanical properties of micro- and nanocapsules: Single-capsule measurements
520
Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique
521
Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique Original Research Article
522
Mechanical properties of Miura-based folded cores under quasi-static loads
523
Mechanical properties of Mo5Si3 intermetallics as a function of composition
524
Mechanical properties of Mo5SiB2 single crystals
525
Mechanical properties of Mo5SiB2 single crystals
526
Mechanical properties of model ice ridge keels
527
Mechanical properties of modified 9Cr–1Mo (T91) irradiated at ⩽300 °C in SINQ Target-3
528
Mechanical properties of modified 9Cr–1Mo steel welds with notches
529
Mechanical properties of monolayer graphene under tensile and compressive loading
530
Mechanical properties of monolithic compressed expanded graphite-based adsorbents related to the temperature of pyrolysis and activation, studied with ultrasound
531
Mechanical properties of Mo–Ru thin films with Ni interlayer of different thickness
532
Mechanical properties of multilayer materials
533
Mechanical properties of multilayered chitosan/CNT nanocomposite films
534
Mechanical properties of multiphase materials and rocks: a phenomenological approach using generalized means
535
Mechanical properties of multiphase Nb–Si–Fe in situ composites
536
Mechanical properties of multiwall carbon nanotubes/epoxy composites: influence of network morphology Original Research Article
537
Mechanical properties of multi-walled carbon nanotube/epoxy composites
538
Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite
539
Mechanical properties of multi-walled carbon nanotube/polyester nanocomposites
540
Mechanical properties of MWNT/Ni bulk composites: Influence of the microstructural refinement on the hardness
541
Mechanical properties of Nafion™ electrolyte membranes under hydrated conditions
542
Mechanical properties of nanocomposite and multilayered Cr–Si–N sputtered thin films
543
Mechanical properties of nanocomposite metal–ceramic thin films
544
Mechanical properties of nanocrystalline materials
545
Mechanical properties of nanocrystalline metals and alloys studied via multi-step nanoindentation and finite element calculations
546
Mechanical properties of nanocrystalline Ni-20%Fe alloy at temperatures from 300 to 4.2 K
547
Mechanical properties of nanocrystalline nickel films deposited by pulse plating
548
Mechanical properties of nanocrystalline nickel produced by electrodeposition
549
Mechanical properties of nanocrystalline Ti–Al–X alloys
550
Mechanical properties of nanocrystalline Ti–Al–X alloys
551
Mechanical properties of nanocrystalline Ti–B–(N) coatings produced by DC magnetron sputtering
552
Mechanical properties of nanocrystalline TiC–ZrC solid solutions fabricated by spark plasma sintering
553
Mechanical properties of nanodiamond-reinforced polymer-matrix composites
554
Mechanical properties of nanohydroxyapatite reinforced poly(vinyl alcohol) gel composites as biomaterial
555
Mechanical properties of nano-MMT reinforced polymer composite and polymer concrete
556
Mechanical properties of nanostructure of biological materials
557
Mechanical properties of nanostructured Al2024–MWCNT composite prepared by optimized mechanical milling and hot pressing methods
558
Mechanical properties of nanostructured and ultrafine-grained iron alloys produced by spark plasma sintering of ball milled powders
559
Mechanical properties of nanostructured chromium
560
Mechanical properties of nanostructured copper-hydrogenated amorphous carbon composite films studied by nanoindentation
561
Mechanical properties of nanostructured materials
562
Mechanical properties of nanostructured materials
563
Mechanical properties of nanostructured Mg–5 wt%Al–x wt%AlN composite synthesized from Mg chips
564
Mechanical properties of nanostructured silicon carbide consolidated by spark plasma sintering
565
Mechanical properties of nanostructured TiN–AlN composites rapidly consolidated by pulsed current activated sintering
566
Mechanical properties of nanostructured, low temperature bainitic steel designed using a thermodynamic model
567
Mechanical properties of nanotubule fibers and composites determined from theoretical calculations and simulations Original Research Article
568
Mechanical properties of nasal fascia and periosteum
569
Mechanical properties of native and ex vivo remodeled porcine saphenous veins
570
Mechanical Properties of Natural Building Stone: Jordanian Building Limestone as an Example
571
Mechanical properties of natural fibers reinforced sustainable masonry
572
Mechanical properties of natural fibre reinforced polyester composites: Jowar, sisal and bamboo
573
Mechanical Properties of Natural Fibre Reinforced PVC Composites: A Review
574
Mechanical properties of natural hydraulic lime-based mortars
575
Mechanical properties of naturally aged Mg–Zn–Cu–Mn alloy
576
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
577
Mechanical properties of NBR/clay nanocomposites by using a novel testing system
578
Mechanical properties of Nd2O3/Y2O3-coated zirconia ceramics
579
Mechanical properties of Nd2O3/Y2O3-coated zirconia ceramics
580
Mechanical Properties of Needle-Punched Fabrics in Relation to Fiber Orientation
581
Mechanical properties of neutron irradiated nanostructured ferritic alloy 14YWT
582
Mechanical properties of neutron-irradiated nickel-containing martensitic steels: I. Experimental study
583
Mechanical properties of neutron-irradiated nickel-containing martensitic steels: II. Review and analysis of helium-effects studies
584
Mechanical properties of neutron-irradiated vanadium alloys in a liquid-sodium environment
585
Mechanical Properties of New Type Negative Offset Structure During Shearing Process of Heavy Steel Plate Original Research Article
586
Mechanical properties of NiAl–AlN–Al2O3 composites
587
Mechanical properties of NiAl–AlN–Al2O3 composites
588
Mechanical Properties of Nickel Free High Nitrogen Austenitic Stainless Steels Original Research Article
589
Mechanical properties of nickel manganites-based ceramics used as negative temperature coefficient thermistors (NTC)
590
Mechanical properties of nickel silicon carbide nanocomposites
591
Mechanical properties of nickel silicon carbide nanocomposites
592
Mechanical properties of nickel–titanium foams for reconstructive orthopaedics
593
Mechanical properties of NiO/Ni–YSZ composites depending on temperature, porosity and redox cycling
594
Mechanical properties of Nomex material and Nomex honeycomb structure
595
Mechanical properties of normal and high strength concretes subjected to high temperatures and using image analysis to detect bond deteriorations
596
Mechanical properties of normal skin and hypertrophic scars
597
Mechanical properties of nuclear waste glasses
598
Mechanical Properties of Okra and Jute Fibers Filled with Groundnut Shell Ash Reinforced Composites with Epoxy (LY556) And Epoxy (XIN 100 IN) Resin Matrices
599
Mechanical properties of oligomer-modified acrylic bone cement
600
Mechanical Properties of Open Graded Asphalt Mixtures with Pumice Aggregate
601
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
602
Mechanical properties of open-cell rhombic dodecahedron cellular structures Original Research Article
603
Mechanical properties of optical glass fibers damaged by nanoindentation and water ageing
604
Mechanical properties of organic matter in shales mapped at the nanometer scale
605
Mechanical properties of organomodified kaolin/natural rubber vulcanizates
606
Mechanical properties of oriented emeraldine base polyaniline
607
Mechanical properties of oxidation-resistant Ni–Cr foams
608
Mechanical properties of oxidation-resistant Ni–Cr foams
609
Mechanical properties of oxidation-resistant Ni–Cr foams
610
Mechanical properties of oxide-fiber reinforced glass matrix composites with BN or SnO2 interfaces
611
Mechanical properties of oxide-fiber reinforced glass matrix composites with BN or SnO2 interfaces
612
Mechanical properties of oxidized silicon nitride ceramics
613
Mechanical properties of oxidized silicon nitride ceramics
614
Mechanical properties of P/M 316L stainless steel materials
615
Mechanical Properties of Paddy Soil in Relation to High Clearance Vehicle Mobility
616
Mechanical properties of paper-pulp packaging
617
Mechanical properties of paper-pulp packaging
618
Mechanical properties of partially crystallized aluminum based amorphous alloys
619
Mechanical properties of partially pyrolysed composites with plain weave basalt fibre reinforcement
620
Mechanical properties of partially sintered materials
621
Mechanical properties of particulate reinforced metal matrix composites by electromagnetic and mechanical stirring and reheating process for thixoforming
622
Mechanical properties of parts produced by using polymer jetting technology
623
Mechanical Properties of Paulownia FORTUNEI Wood impregnated with Silver, Copper and Zinc Oxide Nanoparticles
624
Mechanical properties of Pb-free SnAg solder joints Original Research Article
625
Mechanical properties of PbWO4 scintillating crystals
626
Mechanical properties of PbWO4 scintillating crystals
627
Mechanical properties of Pd–Cu–Si bulk metallic glass
628
Mechanical properties of PECVD a-SiC:H thin films prepared from methyltrichlorosilane
629
Mechanical properties of PECVD hydrogenated amorphous carbon coatings via nanoindentation and nanoscratching techniques
630
Mechanical properties of PECVD thin ceramic films
631
Mechanical properties of phases in austeno-ferritic duplex stainless steel—Surface stresses studied by X-ray diffraction
632
Mechanical properties of phosphate glasses
633
Mechanical properties of photocatalytic white concrete subjected to high temperatures
634
Mechanical properties of photo-degraded recycled photo-degraded polyolefins
635
Mechanical properties of physiological and pathological models of collagen peptides investigated via steered molecular dynamics simulations
636
Mechanical properties of pineapple leaf fibre reinforced polypropylene composites
637
Mechanical properties of plasma deposited polymer coatings
638
Mechanical properties of plasma sprayed nanostructured TiO2 coatings on mild steel
639
Mechanical properties of plasma-deposited SiOxNy coatings on polymer substrates using low load carrying capacity techniques
640
Mechanical properties of platinum nanowires: An atomistic investigation on single-crystalline and twinned structures
641
Mechanical Properties of Poly(acrylamide-sodium acrylate) Hydrogels Synthesized under Direct Current Electric Fields with High Voltages
642
Mechanical properties of poly(vinyl methyl ether) hydrogels below and above their volume Tphase transition
643
Mechanical properties of polyacrylic–titania hybrids—microhardness studies
644
Mechanical properties of polyamide-6/montmorillonite nanocomposites — Prepared by the twin-screw extruder mixed technique
645
Mechanical properties of polyaniline
646
Mechanical properties of polybutadiene reinforced with octadecylamine modified graphene oxide
647
Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures Original Research Article
648
Mechanical Properties of Polyelectrolyte Complex Films Based on Polyvinylamine and Carboxymethyl Cellulose
649
Mechanical Properties of Polyethylene and Poly(Ethylene Terephthalate) Blends
650
Mechanical properties of polyketone terpolymer/rubber blends
651
Mechanical properties of polymer films used in in-mould decoration
652
Mechanical properties of polymer nanofibers revealed by interaction with streams of air
653
Mechanical properties of polymer-derived ceramic composite coatings on steel
654
Mechanical properties of polymer-infiltrated-ceramic-network materials
655
Mechanical properties of polymer-modified concretes containing expanded polystyrene beads
656
Mechanical properties of polymer-modified lightweight aggregate concrete
657
Mechanical properties of polymer-modified silica aerogels dried under ambient pressure
658
Mechanical Properties of Polyolefin Fiber-Reinforced Light Weight Concrete
659
Mechanical properties of polyphenylene-sulfide (PPS) bonded Nd–Fe–B permanent magnets
660
Mechanical properties of polyphenylene-sulfide (PPS) bonded Nd–Fe–B permanent magnets
661
Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials
662
Mechanical properties of polypropylene hybrid fiber-reinforced concrete
663
Mechanical properties of polypropylene reinforced with recycled-pet fibres
664
Mechanical properties of polytypoidally joined Si3N4–Al2O3 Original Research Article
665
Mechanical properties of polyurethane films prepared from liquefied wood with polymeric MDI
666
Mechanical properties of polyurethane foams prepared from liquefied corn stover with PAPI
667
Mechanical properties of porcine and human arteries: implications for coronary anastomotic connectors
668
Mechanical properties of porcine pulmonary valve leaflets: How do they differ from aortic leaflets?,
669
Mechanical properties of porous bulk glassy alloy prepared in high-pressure hydrogen atmosphere
670
Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior
671
Mechanical properties of porous combustion synthesized Ni3Ti–TiCx composites
672
Mechanical properties of porous crosslinked poly(ethyl-acrylate) for tissue engineering
673
Mechanical properties of porous Ti–15Mo–5Zr–3Al compacts prepared by powder sintering
674
Mechanical properties of potassium titanate whiskers reinforced poly(ether ether ketone) composites using different compounding processes
675
Mechanical properties of PP-LDPE blends with novel morphologies produced with a continuous chaotic advection blender
676
Mechanical properties of precast reinforced concrete slab tracks on non-ballasted foundations
677
Mechanical properties of pressureless sintered alumina containing alumina platelets
678
Mechanical properties of pressureless sintered alumina containing alumina platelets
679
Mechanical properties of pressure-less sintered ZrB2 with molybdenum, iron and carbon additives
680
Mechanical Properties of ProTaper Gold, EdgeTaper Platinum, Flex Gold and Pro-T Rotary Systems
681
Mechanical Properties of Protein-Based Polymer Blends
682
Mechanical properties of provisional crown and bridge materials: Chemical-curing versus dual-curing systems
683
Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures
684
Mechanical properties of pultruded glass fiber-reinforced plastic after moistening
685
Mechanical properties of pure Ni and Ni-alloy substrate materials for Y–Ba–Cu–O coated superconductors Original Research Article
686
Mechanical properties of pure tantalum after 800 MeV proton irradiation
687
Mechanical properties of PVC coated bi-axial warp knitted fabric with and without initial cracks under multi-axial tensile loads
688
Mechanical properties of PVC/nano-CaCO3 composites
689
Mechanical properties of quasicrystalline Al–Cu–Fe coatings with submicron-sized grains
690
Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis
691
Mechanical properties of randomly oriented short Sansevieria cylindrica fibre/polyester composites
692
Mechanical properties of rapidly solidified Al-Ti-Fe, Al-Cu-Fe and Al-Fe-Cu-Ti based alloys extruded from their atomized powders
693
Mechanical properties of rapidly solidified Al-Ti-Fe, Al-Cu-Fe and Al-Fe-Cu-Ti based alloys extruded from their atomized powders
694
Mechanical properties of rat thoracic and abdominal aortas
695
Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag
696
Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes
697
Mechanical properties of reactively processed W/Ta2C-based composites
698
Mechanical properties of recycled aggregate concrete under uniaxial loading
699
Mechanical properties of recycled natural composite material with polyester
700
Mechanical properties of regenerated coracoacromial ligament after subacromial decompression
701
Mechanical properties of reinforced MgB/sub 2/ wires
702
Mechanical properties of reinforced soil
703
Mechanical properties of resin composites with filler particles aligned by an electric field
704
Mechanical properties of Rh-based L12 intermetallic compounds Rh3Ti, Rh3Nb and Rh3Ta
705
Mechanical Properties of RTM-made Composite Cross-joints
706
Mechanical properties of rubber composites with stacked-cup carbon nanotubes
707
Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag
708
Mechanical properties of self-compacting concrete incorporating quarry dust powder, silica fume or fly ash
709
Mechanical properties of SEVA / hydroxyapatite composite with to HAP different particle sizes
710
Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC matrix composites
711
Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC matrix composites
712
Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC matrix composites
713
Mechanical properties of severely plastic deformed aluminum sheets joined by friction stir welding
714
Mechanical properties of SG-iron subjected to variable and isothermal austempering temperatures heat treatment
715
Mechanical properties of SG-iron subjected to variable and isothermal austempering temperatures heat treatment
716
Mechanical properties of SG-iron subjected to variable and isothermal austempering temperatures heat treatment
717
Mechanical properties of short carbon fiber-reinforced TiC composites produced by hot pressing
718
Mechanical properties of short carbon fiber-reinforced TiC composites produced by hot pressing
719
Mechanical properties of short fiber reinforced thermoplastic blends
720
Mechanical properties of short flax fibre bundle/poly(ε-caprolactone) composites: Influence of matrix modification and fibre content
721
Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling
722
Mechanical Properties of Short Random Oil Palm FibreReinforced Epoxy Composites(Ciri-ciri Mekanikal Gentian Pendek Secara Rawak Kelapa SawitBertetulang Komposit Epoksi)
723
Mechanical properties of Si- and C-doped directionally solidified TiAl–Nb alloys
724
Mechanical properties of Si3N4/SiC nanocomposites studied by instrumented indentation with spheres
725
Mechanical properties of Si3N4–Al2O3 FGM joints with 15 layers for high-temperature applications
726
Mechanical properties of Sialon
727
Mechanical properties of Sialon
728
Mechanical properties of SiC ceramics by ultrasonic nondestructive technique and its bioactivity
729
Mechanical properties of SiC long fibre reinforced copper
730
Mechanical properties of SiC/SiC composite with magnesium–silicon oxide interphase
731
Mechanical properties of SiC/SiC composites by PIP process with a new precursor at elevated temperature
732
Mechanical properties of SiC/SiC composites fabricated by PIP process with a new precursor polymer
733
Mechanical properties of SiCp/Al2O3 ceramic matrix composites prepared by directed oxidation of an aluminum alloy
734
Mechanical Properties of SIFCON with Variation Steel Fiber Ratio and Nano Kaolin
735
Mechanical properties of silanized jute–polypropylene composites
736
Mechanical properties of silica aerogels measured by microindentation: influence of sol–gel processing parameters and carbon addition
737
Mechanical properties of silica–(meth)acrylate hybrid coatings on polycarbonate substrate
738
Mechanical properties of silicate glasses as a function of composition
739
Mechanical properties of silicene
740
Mechanical properties of silicon carbide sintered with additive Y3Al5O12
741
Mechanical Properties of Silicon Nanotubes
742
Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures
743
Mechanical properties of silicon-doped diamond-like carbon films prepared by pulse-plasma chemical vapor deposition
744
Mechanical properties of silicone methacrylate microparticles determined by AFM Colloidal Probe Technique
745
Mechanical properties of silicone rubber composed of diverse vinyl content silicone gums blending
746
Mechanical properties of silkworm cocoon pelades
747
Mechanical properties of silkworm cocoons
748
Mechanical properties of similar and dissimilar weldments of RAFMS and AISI 316L (N) SS prepared by electron beam welding process
749
Mechanical properties of simple condensed matter
750
Mechanical properties of simultaneously synthesized and consolidated carbon nanofiber (CNF)-dispersed SiC composites by pulsed electric-current pressure sintering
751
Mechanical properties of single- and double-gated injection moulded short glass fibre reinforced PBT/PC composites
752
Mechanical properties of single crystal tungsten microwhiskers characterized by nanoindentation
753
Mechanical properties of single crystal YAg Original Research Article
754
Mechanical properties of single crystal YCu and (Tb0.88Dy0.12)Zn B2 intermetallic compounds
755
Mechanical properties of single electrospun collagen type I fibers
756
Mechanical properties of single hyaluronan molecules
757
Mechanical properties of single-plate shear connections under monotonic, cyclic, and blast loads
758
Mechanical properties of single-walled carbon nanotube bundles as bulk materials
759
Mechanical properties of single-walled carbon nanotubes based on higher order Cauchy–Born rule
760
Mechanical properties of sintered La9.33Si2Ge4O26 oxyapatite materials for SOFC electrolytes
761
Mechanical properties of sintered ZrB2–SiC ceramics
762
Mechanical properties of sinter-hardened Cr–Si–Ni–Mo based steel foam
763
Mechanical properties of SiOx gas barrier coatings on polyester films
764
Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites
765
Mechanical properties of skeletal bone in gene-mutated stöpseldtl28d and wild-type zebrafish (Danio rerio) measured by atomic force microscopy-based nanoindentation
766
Mechanical properties of skeletal bone in gene-mutated stöpseldtl28d and wild-type zebrafish (Danio rerio) measured by atomic force microscopy-based nanoindentation
767
Mechanical properties of small size specimens of F82H steel
768
Mechanical properties of Sn–0.7Cu/Si3N4 lead-free composite solder
769
Mechanical properties of Sn–Zn lead-free solder alloys based on the microstructure array
770
Mechanical properties of soft human tissues under dynamic loading
771
Mechanical properties of soft magnetic FeCo alloys
772
Mechanical properties of soft magnetic FeCo alloys
773
Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests
774
Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites
775
Mechanical properties of soilcrete mixtures modified with metakaolin
776
Mechanical properties of sol–gel calcium titanate bioceramic coatings on titanium
777
Mechanical properties of sol–gel derived lead zirconate titanate thin films by nanoindentation
778
Mechanical properties of solution-precursor plasma-sprayed thermal barrier coatings
779
Mechanical properties of sound and fissured rice kernels and their implications for rice breakage Original Research Article
780
Mechanical properties of spark plasma sintered FeAl intermetallics
781
Mechanical properties of SPCC low carbon steel joints prepared by metal inert gas welding
782
Mechanical properties of spinal nerve roots subjected to tension at different strain rates
783
Mechanical properties of sputtered Cu/V and Al/Nb multilayer films
784
Mechanical properties of sputtered nickel–phosphorus-based hard coatings under thermal annealing
785
Mechanical properties of sputtered silicon oxynitride films by nanoindentation
786
Mechanical properties of stapedial annular ligament
787
Mechanical properties of starch-based materials. I. Short review and complementary experimental analysis
788
Mechanical properties of steel ber-reinforced concrete slab tracks on non-ballasted foundations
789
Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800 °C
790
Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete
791
Mechanical properties of steel fibre reinforced and rubberised cement-based mortars
792
Mechanical Properties of Steels Treated by Q-P-T Process Incorporating Carbide-free-bainite/martensite Multiphase Microstructure Original Research Article
793
Mechanical properties of structural bamboo for bamboo scaffoldings
794
Mechanical properties of structural concrete with fine recycled ceramic aggregates
795
Mechanical properties of structural materials from first-principles
796
Mechanical properties of structures of semifinished products joined to aluminium foams
797
Mechanical properties of superconducting MgB2 wire
798
Mechanical properties of superhard diamondlike BC5
799
Mechanical properties of superhard nanocomposites
800
Mechanical properties of suprarenal and infrarenal abdominal aorta: Implications for mouse models of aneurysms
801
Mechanical properties of surface-functionalized SWCNT/epoxy composites Original Research Article
802
Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid
803
Mechanical properties of SWNT/epoxy composites using two different curing cycles
804
Mechanical properties of talcand CaCO3-reinforced high-crystallinity polypropylene composites
805
Mechanical properties of TaN-Cu nanocomposite thin films
806
Mechanical properties of tannin-based rigid foams undergoing compression
807
Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen Original Research Article
808
Mechanical properties of tension levelled and skin passed steels
809
Mechanical properties of textured ceramics from muscovite–kaolinite alternate layers
810
Mechanical properties of textured, multilayered alumina produced using electrophoretic deposition in a strong magnetic field
811
Mechanical properties of the A356 aluminum alloy modified with La/Ce
812
Mechanical properties of the alloy Ti–6Al–4V irradiated with swift Kr ion
813
Mechanical properties of the alumina-coated Al18B4O33w/6061Al composites
814
Mechanical properties of the alumina-coated Al18B4O33w/6061Al composites
815
Mechanical properties of the aluminum roll-bond laminate AA5005–AA5083–AA5005
816
Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites
817
Mechanical properties of the capsules of chitosan–soy globulin polyelectrolyte complex
818
Mechanical Properties of the Collagen Network in Human Articular Cartilage as Measured by Osmotic Stress Technique
819
Mechanical properties of the elemental nanocomponents of nacre structure
820
Mechanical properties of the European reference RAFM steel (EUROFER97) before and after irradiation at 300 °C
821
Mechanical properties of the hardfacing alloys with different La2O3 additives and the mechanism analysis by first-principles calculations
822
Mechanical properties of the hexagonal boron nitride monolayer: Ab initio study
823
Mechanical properties of the hot-rolled Mg–12Gd–3Y magnesium alloy
824
Mechanical properties of the human achilles tendon
825
Mechanical properties of the human anterior cruciate ligament
826
Mechanical properties of the human gastrointestinal tract
827
Mechanical properties of the human patellar tendon, in vivo
828
Mechanical properties of the human uterine cervix: An in vivo study
829
Mechanical properties of the ice I–magnesium sulfate eutectic: A comparison with freshwater ice in reference to Europa
830
Mechanical properties of the ITER central solenoid model coil insulation under static and dynamic load after reactor irradiation
831
Mechanical properties of the normal human tibial cartilage-bone complex in relation to age
832
Mechanical properties of the paper sheets treated with different polymers
833
Mechanical properties of the periosteum in the pig, Sus scrofa
834
Mechanical properties of the plasma-enhanced magnetron sputtering Si–C–N coatings Review Article
835
Mechanical properties of the plasma-sprayed Al2O3/ZrSiO4 coatings
836
Mechanical properties of the posterior rotator cuff
837
Mechanical properties of the rabbit and human decellularized patches for well-tolerated/reinforced organ in cardiac tissue engineering
838
Mechanical properties of the rust layer induced by impressed current method in reinforced mortar
839
Mechanical properties of the tendinous equine interosseus muscle are affected by in vivo transducer implantation
840
Mechanical properties of the triceps surae tendon and aponeurosis in relation to intensity of sport activity
841
Mechanical properties of the X-ray irradiated DLC films containing SiOx as a constructive element for radiation detectors
842
Mechanical properties of the X-ray irradiated DLC films containing SiOx as a constructive element for radiation detectors
843
Mechanical properties of thermal barrier coatings after isothermal oxidation.: Depth sensing indentation analysis
844
Mechanical Properties of Thermoplastic Natural Rubber (TPNR) Reinforced with Different Types of Carbon Nanotube
845
Mechanical properties of thermoplastic polyurethane elastomers with mica and aluminum trihydrate
846
Mechanical properties of thin films and multilayers
847
Mechanical properties of thin films in the ternary triangle B–C–N
848
Mechanical properties of thin films measured by nanoindenters
849
Mechanical properties of thin film–substrate systems
850
Mechanical Properties of Thin GDP Shells Used as Cryogenic Direct Drive Targets at OMEGA
851
Mechanical properties of thin surface layers affected by material removal processes
852
Mechanical properties of thixomolded AZ91D magnesium alloy
853
Mechanical properties of three-dimensional braided composites
854
Mechanical properties of three-leaf stone masonry grouted with ternary or hydraulic lime-based grouts
855
Mechanical properties of Ti–(∼49 at%) Ni shape memory alloy, part II: Effect of ageing treatment
856
Mechanical properties of Ti-(∼49 at%) Ni shape memory alloy: Part I. Effect of cold deformation
857
Mechanical properties of Ti(C0.7N0.3) film produced by plasma electrolytic carbonitriding of Ti6Al4V alloy
858
Mechanical properties of Ti–(SiCp/Al) laminated composite with nano-sized TiAl3 interfacial layer synthesized by roll bonding
859
Mechanical properties of Ti–4.5Al–3V–2Mo–2Fe and possibility for healthcare applications
860
Mechanical Properties of Ti–50(Pt,Ir) High-Temperature Shape Memory Alloys
861
Mechanical properties of Ti–6 at.% Mo–4 at.% Sn alloy wires and their application to medical guidewire
862
Mechanical properties of Ti6.5Al2Zr1Mo1V titanium alloy with EBW under different temperatures
863
Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements Original Research Article
864
Mechanical properties of TiB2-based nanostructured coatings
865
Mechanical properties of TiN thin film coatings on 304 stainless steel substrates
866
Mechanical properties of TiN/TiB2 multilayers deposited by plasma enhanced chemical vapor deposition
867
Mechanical properties of Ti–Nb biomedical shape memory alloys containing Ge or Ga
868
Mechanical properties of Ti–Ni shape memory thin films formed by sputtering
869
Mechanical properties of Ti–Ni shape memory thin films formed by sputtering
870
Mechanical properties of TiNx/Cr1−xN thin films on plasma nitriding-assisted AISI H13 steel
871
Mechanical properties of titania films used as biomaterials
872
Mechanical properties of titania prepared by plasma electrolytic oxidation at different voltages
873
Mechanical Properties of Titanium Cermets for Joint Prostheses
874
Mechanical properties of titanium nickelide at high strain rate loading
875
Mechanical properties of titanium nickelide at high strain rate loading
876
Mechanical properties of titanium oxide film deposited on LTI-carbon by IBED
877
Mechanical properties of Ti–W alloys reinforced with TiC particles
878
Mechanical properties of tomato exocarp, mesocarp and locular gel tissues Original Research Article
879
Mechanical properties of tricalcium phosphate single crystals grown by molten salt synthesis
880
Mechanical properties of tri-modal Al matrix composites reinforced by nano- and submicron-sized Al2O3 particulates developed by wet attrition milling and hot extrusion
881
Mechanical properties of triple composites of polycarbonate, single-walled carbon nanotubes and carbon fibres
882
Mechanical properties of tungsten alloys with Y2O3 and titanium additions
883
Mechanical properties of tungsten doped amorphous hydrogenated carbon films prepared by tungsten plasma immersion ion implantation
884
Mechanical properties of tungsten fiber reinforced ZrAlNiCuSi metallic glass matrix composite
885
Mechanical properties of two chromium alloys in as-received and heat-treated conditions
886
Mechanical Properties of two novel planar lattice structures
887
Mechanical properties of two ultrahigh carbon-boron tool steels
888
Mechanical properties of two ultrahigh carbon-boron tool steels
889
Mechanical properties of two-dimensional graphyne sheet under hydrogen adsorption
890
Mechanical properties of Tylose gel and chocolate in the freezing range
891
Mechanical properties of type I and type IIB single porcine muscle fibres
892
Mechanical properties of UHMWPE/Sm2O3 composite shielding material
893
Mechanical properties of ultra fine grained steels
894
Mechanical properties of ultra fine-grained HSLA and Ti-IF steels
895
Mechanical properties of ultrafine grained ferritic steel sheets fabricated by rolling and annealing of duplex microstructure
896
Mechanical Properties of Ultrafine Grained Steel Produced by Repetitive Cold Side Extrusion
897
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging
898
Mechanical properties of ultrananocrystalline diamond films modified by hydrogen concentration in deposition atmosphere
899
Mechanical properties of undoped GaAs. II: The brittle-to-ductile transition temperature Original Research Article
900
Mechanical properties of undoped GaAs. III: Indentation experiments Original Research Article
901
Mechanical properties of undoped GaAs. Part I: Yield stress measurements Original Research Article
902
Mechanical properties of unidirectional nanocomposites with non-uniformly or randomly staggered platelet distribution
903
Mechanical properties of unirradiated and irradiated reduced-activation martensitic steels with and without nickel compared to properties of commercial steels
904
MECHANICAL PROPERTIES OF UNSATURATED COHESIVE SOIL IN CONSIDERATION OF TENSILE STRESS
905
Mechanical properties of UV-photopolymerizable hybrid sol–gel films investigated by AFM in Pulsed Force Mode
906
Mechanical properties of V–4Cr–4Ti alloy after first-wall coating with tungsten
907
Mechanical properties of V–4Cr–4Ti strengthened by precipitation and cold rolling
908
Mechanical properties of vanadium carbide and a ternary vanadium tungsten carbide
909
Mechanical properties of vapor grown carbon nanofibers Original Research Article
910
Mechanical properties of vapor-grown carbon fiber Original Research Article
911
Mechanical properties of visible light-cured resins reinforced with hydroxyapatite for dental restoration
912
Mechanical properties of WC/Co cemented carbide with larger WC grain size
913
Mechanical properties of WC–WB–W2B composites prepared by reaction sintering of B4C–W–WC powders
914
Mechanical properties of weldments using irradiated stainless steel welded by the laser method for ITER blanket replacement
915
Mechanical properties of white and green asparagus: changes related to modifications of cell wall components
916
Mechanical properties of woven banana fibre reinforced epoxy composites
917
Mechanical properties of woven glass fabric reinforced in situ polymerized poly(butylene terephthalate) composites
918
Mechanical properties of woven laminates and felt composites using carbon fibers. Part 1: in-plane properties
919
Mechanical properties of woven laminates and felt composites using carbon fibers. Part 2: interlaminar properties
920
Mechanical properties of Y2O3/Al2O3-coated Y-TZP ceramics
921
Mechanical properties of Y2O3-doped W–Ti alloys
922
Mechanical properties of Y-TPZ ceramics obtained by liquid phase sintering using bioglass as additive
923
Mechanical properties of ytterbia stabilized zirconia ceramics (Yb-TZP) fabricated from powders prepared by co-precipitation method
924
Mechanical properties of zirconia composite ceramics
925
Mechanical properties of zirconia toughened alumina with 10–24 vol.% 1.5 mol% Y-TZP reinforcement
926
Mechanical properties of zirconia toughened alumina with 10–24 vol.% 1Y-TZP reinforcement
927
Mechanical properties of zirconia-based ceramics asfunctions of temperature
928
Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite Original Research Article
929
Mechanical properties of Zr57Ti5Al10Cu20Ni8 amorphous and partially nanocrystallized alloys
930
Mechanical properties of Zr57Ti5Al10Cu20Ni8 amorphous and partially nanocrystallized alloys
931
Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering
932
Mechanical properties of ZrB2–SiC(ZrSi2) ceramics
933
Mechanical properties of Zr-based bulk glassy alloys containing nanoscale compound particles
934
Mechanical properties of ZrCuTi thin film metallic glass with high content of immiscible tantalum
935
Mechanical properties of Zylon/epoxy composite
936
Mechanical properties of κ-carrageenan in high concentration of sugar solutions
937
Mechanical properties over the glass transition of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass
938
Mechanical Properties Research on Suspended-dome Structure with Discontinuous Support Under Different Parameters
939
Mechanical properties study of a magnetron-sputtered Zr-based thin film metallic glass
940
Mechanical properties study of particles reinforced aluminum matrix composites by micro-indentation experiments
941
Mechanical properties up to 1100 °C of Al2O3–MgO-extruded graphite pellets castables reinforced with steel fibres
942
Mechanical properties with respect to water content of gelatin films in glassy state
943
Mechanical properties, anisotropic swelling behaviours and structures of jellyfish mesogloea
944
Mechanical properties, anisotropic swelling behaviours and structures of jellyfish mesogloea
945
Mechanical properties, bioactivity and corrosion resistance of oxygen and sodium plasma treated nickel titanium shape memory alloy
946
Mechanical properties, biocompatibility, and biodegradation of cross-linked cellulose acetate-reinforced polyester composites
947
Mechanical properties, biological activity and protein controlled release by poly(vinyl alcohol)–bioglass/chitosan–collagen composite scaffolds: A bone tissue engineering applications
948
Mechanical properties, defects and electronic behavior of carbon nanotubes Original Research Article
949
Mechanical properties, deformation behaviors and interface adhesion of (AlCrTaTiZr)Nx multi-component coatings
950
Mechanical properties, degradation performance and cytotoxicity of Mg–Zn–Ca biomedical alloys with different compositions
951
Mechanical properties, density and quantitative CT scan data of trabecular bone with and without metastases
952
Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum
953
Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying
954
Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying
955
Mechanical properties, electronic structure and bonding of α- and β-tricalcium phosphates with surface characterization
956
Mechanical properties, fire performance and thermal stability of magnesium hydroxide sulfate hydrate whiskers flame retardant silicone rubber
957
Mechanical properties, flammability and char morphology of epoxy resin/montmorillonite nanocomposites
958
Mechanical properties, hydrophilicity and water activity of starch-gum films: effect of additives and deacetylated xanthan gum
959
Mechanical properties, microstructure and crystal structures of Al98−3xCu2xFexCe1Zr1 (x = 1–3 at.%) alloys extruded from their atomized powders
960
Mechanical properties, microstructure and crystal structures of Al98−3xCu2xFexCe1Zr1 (x = 1–3 at.%) alloys extruded from their atomized powders
961
Mechanical properties, microstructure and micro-texture evolution for 1050AA deformed by equal channel angular pressing (ECAP) and post ECAP plane strain compression using two loading schemes
962
Mechanical properties, microstructure and texture of single pass equal channel angular pressed 1050, 5083, 6082 and 7010 aluminum alloys with different dies
963
Mechanical properties, microstructure, and fracture behavior of friction stir welded AA7075 joints with conical pin and conical threaded pin type tools
964
Mechanical properties, modeling and design of porous clay ceramics
965
Mechanical properties, morphologies, and crystallization behavior of plasticized poly(l-lactide)/poly(butylene succinate-co-l-lactate) blends
966
Mechanical properties, morphology and molecular characteristics of poly(ethylene terephthalate) toughened by natural rubber
967
Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly(butylene succinate)
968
Mechanical properties, phases and microstructure of ultrafine hardmetals prepared by WC–6.29Co nanocrystalline composite powder
969
Mechanical properties, phases and microstructure of ultrafine hardmetals prepared by WC–6.29Co nanocrystalline composite powder
970
Mechanical properties, phenolic composition and extractability indices of Barbera grapes of different soluble solids contents from several growing areas Original Research Article
971
Mechanical properties, proteolytic degradability and biological modifications affect angiogenic process extension into native and modified fibrin matrices in vitro
972
Mechanical Properties, Purifying Techniques and Processing Methods of Metal Yttrium
973
Mechanical properties–microstructure correlation in neutron irradiated heat-affected zones of austenitic stainless steels
974
Mechanical property analysis of stored red blood cell using optical tweezers
975
Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade
976
Mechanical property and dimensional stability of substrates for magnetic tapes
977
Mechanical property and fracture behavior of strip cast Zr-base BMG alloy containing crystalline phase
978
Mechanical property and fracture characteristic of induction brazed joints of TiAl-based intermetallics to steel 35CrMo with Ag–Cu–Ni–Li filler
979
Mechanical property and in vitro biocompatibility of brushite cement modified by polyethylene glycol
980
Mechanical property and microstructural change by thermal aging of SCS14A cast duplex stainless steel
981
Mechanical property and microstructural changes during friction stir processing of cast aluminum 2285 alloy
982
Mechanical Property and Microstructural Characterization of C-Mn-Al-Si Hot Dip Galvanizing TRIP Steel Original Research Article
983
Mechanical property and microstructure evolutions of Cf/SiOC composites with increasing annealing temperature in reduced pressure environment
984
Mechanical property and microstructure of aluminum alloy-steel tubes joint by magnetic pulse welding
985
Mechanical property and R-curve behavior of the B4C/BN ceramics composites
986
Mechanical property change and swelling behavior of SiC fiber after light-ion irradiation
987
Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters
988
Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters
989
Mechanical property characterization of electrospun recombinant human tropoelastin for vascular graft biomaterials
990
Mechanical property characterization of film-fabric laminate for stratospheric airship envelope
991
Mechanical property characterization of resin cement after aqueous aging with and without cyclic loading
992
Mechanical property degradation of a CuZr-based bulk metallic glass composite induced by sub-Tg annealing
993
Mechanical property degradation of a Nicalon fiber reinforced SiNC ceramic matrix composite under thermal shock loading
994
Mechanical property determination of bone through nano- and micro-indentation testing and finite element simulation
995
Mechanical property distribution of CFRP filament wound composites
996
Mechanical property distribution of CFRP filament wound composites
997
Mechanical property enhancement of kinetic sprayed Al coatings reinforced by multi-walled carbon nanotubes Original Research Article
998
Mechanical property evaluation of cathodic arc plasma-deposited CrN thin films on Fe–Mn–Al–C alloys
999
Mechanical property evaluation of natural fiber coir composite
1000
Mechanical property evaluation of pressable restorative ceramics
