ليست عنوان مقالات لاتين Properties of matter at forward rapidities at RHIC Original Research Article Property rights in state legislatures: rural-urban differences in support for state anti-takings bills

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Properties of matter at forward rapidities at RHIC Original Research Article

2

Properties of Matter matter in assessment of scald injuries

3

Properties of measures of association within an extended FGM

4

Properties of mechanically alloyed Al75-x Ti25Crx

5

Properties of mechanically alloyed Al75-x Ti25Crx

6

Properties of mechanically alloyed Mg–Ni–Ti ternary hydrogen storage alloys for Ni-MH batteries

7

Properties of mechanically milled and spark plasma sintered Al–15 at.% MgB2 composite materials

8

Properties of mechanically milled and spark plasma sintered Al–AlB2 and Al–MgB2 nano-composite materials

9

Properties of Medium Density Fiberboard Made from Wet and Dry Stored Bagasse

10

Properties of medium density fiberboards made from renewable biomass

11

Properties of medium-density fibreboard (MDF) made from treated empty fruit bunch of oil palm

12

Properties of MEH-PPV films prepared by slow solvent evaporation

13

Properties of melt processed chitosan and aliphatic polyester blends

14

Properties of mesoporous carbons prepared from different carbon precursors using nanosize silica as a template

15

Properties of mesoporous carbons prepared from different carbon precursors using nanosize silica as a template

16

Properties of mesoporous tungstosilicic acid/titania composites prepared by sol–gel method

17

Properties of metakaolin geopolymer hardened paste prepared by high-pressure compaction

18

Properties of metal bolometers fabricated on porous silicon

19

Properties of metal doped tungsten oxide thin films for NOx gas sensors grown by PLD method combined with sputtering process

20

Properties of metal oxide clusters in non-traditional oxidation states

21

Properties of metal phosphates and phosphides in glass-ceramic waste forms

22

Properties of metallocene complexes during the oxidative crosslinking of air drying coatings Original Research Article

23

Properties of methacrylate–thiol–ene formulations as dental restorative materials

24

Properties of methyl radical trapped in amorphous SiO2 and in natural SiO2-clathrate Melanophlogite

25

Properties of Mg2Si (100) surfaces: A first-principles study

26

Properties of MgB/sub 2/ films grown by means of different vapor phase techniques

27

Properties of MgB2 superconductors with regard to space applications Original Research Article

28

Properties of Mg-based materials for hydrogen storage Original Research Article

29

Properties of MgxZn1−xO thin films sputtered in different gases

30

Properties of Mg-Y-Cu glasses with nanocrystalline particles

31

Properties of MHD turbulence and its consequences for the ISM and ICM

32

properties of M-hyoellipticity for pseudo differential operators

33

Properties of microdispersed sintered nanodiamonds as a stationary phase for normal-phase high performance liquid chromatography

34

Properties of microemulsions with mixed nonionic surfactants and citrus oil

35

Properties of microfine cement grouts at 4 °C, 10 °C and 20 °C

36

Properties of microsolvated ions: From the microenvironment of chromophore and alkali metal ions in proteins to negative ions in water clusters Original Research Article

37

Properties of micro-strip gas chambers (MSGC) and recent developments

38

Properties of milk protein concentrate stabilized oil-in-water emulsions Original Research Article

39

Properties of minimal mathematical expectations Original Research Article

40

Properties of mixed adsorption films of aniline–p-fluoroaniline at the water/air interface

41

Properties of mixed alkanethiol–dendrimer layers and their applications in biosensing

42

Properties of mixed backbone oligonucleotides containing 3′-O-methyl ribonucleosides

43

Properties of mixed Li2O and Na2O molybdenum phosphate glasses

44

Properties of mixed molybdenum oxide–iridium oxide thin films synthesized by spray pyrolysis

45

Properties of mixed monolayer and LB films of chiral amino acid porphyrin

46

Properties of mixed monolayers of clinical lung surfactant, serum albumin and hydrophilic polymers

47

Properties of mixed Na2O and K2O iron phosphate glasses

48

Properties of mixed phase n-doped silicon oxide layers and application in micromorph solar cells

49

Properties of MnZn ferrites prepared by powder injection molding technology

50

Properties of modified anhydride hardener and its cured resin Original Research Article

51

Properties of modified atmosphere heat pump dried foods Original Research Article

52

Properties of Modified Bitumen Obtained from Vacuum Bottom by Adding Recycled Waste Polymers and Natural Bitumen

53

Properties of Modified High Permeable Concrete with a Crumb Rubber

54

Properties of modified hydroxyl-terminated polybutadiene based polyurethane membrane

55

Properties of modulated and demodulated systems with implications to feedback limitations

56

Properties of moments of a family of GARCH processes

57

Properties of mortar prepared with recycled cathode ray tube funnel glass sand at different mineral admixture

58

Properties of Motility in Bacillus subtilis Powered by the H+-coupled MotAB Flagellar Stator, Na+-coupled MotPS or Hybrid Stators MotAS or MotPB

59

Properties of Moyal–Lax representation

60

Properties of multi-layer composite membranes on the base of polyethylene porous films Original Research Article

61

Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing

62

Properties of multilayered thin films for thermal ink-jet printing devices

63

Properties of multi-mode resource-constrained project scheduling problems with resource vacations and activity splitting

64

Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash

65

PROPERTIES OF MULTIVALENT FUNCTIONS ASSOCIATED WITH A CERTAIN INTEGRAL OPERATOR

66

Properties of multivariable fuzzy controller under Gödelʹs implication

67

Properties of Multivariate Homogeneous Orthogonal Polynomials Original Research Article

68

Properties of musculus gluteus maximus in above-knee amputees

69

Properties of N=1 SUSY Yang-Mills vacuum and domain walls

70

Properties of N=84, even-even nuclei populated in the spontaneous fission of 248Cm

71

Properties of N2- and CO2-foams as a function of pressure

72

Properties of Na2O–Al2O3–B2O3 glasses

73

Properties of Na2O–Al2O3–B2O3 glasses

74

Properties of Nafion 117 in highly acidic environment of Bunsen reaction of I–S cycle

75

Properties of Nafion membranes under PEM water electrolysis conditions

76

Properties of Nafion® NR-211 membranes for PEMFCs

77

Properties of NaNbO3 powders and ceramics prepared by hydrothermal reaction

78

Properties of nanocomposites based on sulfonated poly(styrene-b-ethylenebutylene-b-styrene) and multiwalled carbon nanotubes

79

Properties of nanocrystalline Al–Cu–O films reactively sputtered by DC pulse dual magnetron

80

Properties of nanocrystalline and nanocomposite WxZr1−x thin films deposited by co-sputtering

81

Properties of nanocrystalline ferroelectric PZT ceramics

82

Properties of nanocrystalline SnO2 obtained by means of a microwave process

83

Properties of nanofibre reinforced cement composites

84

Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential

85

Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential

86

Properties of nanometric and micrometric multilayered films made of three conducting polymers

87

Properties of nanometric and submicrometric multilayered films of poly(3,4-ethylenedioxythiophene) and poly(N-methylpyrrole)

88

Properties of nano-multilayered hard coatings deposited by a new hybrid coating process: Combined cathodic arc and unbalanced magnetron sputtering

89

Properties of nanopatterned pins generated in a superconductor with FIB

90

Properties of nanoscale metal hydrides

91

Properties of nano-scale soliton-like excitations in two-dimensional lattice layers

92

Properties of nanostructured magnesium metatitanate prepared by the sol-gel technique

93

Properties of nano-ZnO/poly(vinyl alcohol)/poly(ethylene oxide) composite thin films

94

Properties of nano-ZnO/poly(vinyl alcohol)/poly(ethylene oxide) composite thin films

95

Properties of narrow coronal massejections observed with LASCO Original Research Article

96

Properties of narrow gap quantum dots and wells in the InAs/InSb/GaSb systems

97

Properties of natural cellulose fibers from hop stems

98

Properties of natural cellulose fibers from hop stems

99

Properties of Natural Double-Strand-Break Sites at a Recombination Hotspot in Saccharomyces cerevisiae

100

Properties of natural organisms and its use in technological architecture

101

Properties of Nb doped Zr-rich PZT ceramics prepared by a heterogenous precipitation method

102

Properties of Nb-doped SrCo0.8Fe0.2O3−d perovskites in oxidizing and reducing environments

103

Properties of NdFeB film grown on silicon substrate by PLD under external magnetic field

104

Properties of N-doped ZnO thin films in annealing process

105

Properties of near-zero modes and chiral symmetry breaking Original Research Article

106

Properties of new cork–polymer composites: Advantages and drawbacks as compared with commercially available fibreboard materials

107

Properties of new low melting point quaternary ammonium salts with bis(trifluoromethanesulfonyl)imide anion

108

Properties of new refrigerants and predictions for condensation heat transfer enhancement with low-finned tubes

109

Properties of Ni/Y2O3 and its catalytic performance in methane conversion to syngas

110

Properties of Ni/YSZ cermet as anode for SOFC

111

Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application

112

Properties of Ni-aluminides-reinforced Ni-matrix laminates synthesized by pulsed-current hot pressing (PCHP)

113

Properties of nicked and circular dumbbell RNA/DNA chimeric oligonucleotides containing antisense phosphodiester oligodeoxynucleotides Original Research Article

114

Properties of NiCrBSi coating, as sprayed and remelted by different technologies

115

Properties of NiO cathode coated with lithiated Co and Ni solid solution oxide for MCFCs

116

Properties of NiO sputtered thin films and modeling of their sensing mechanism under formaldehyde atmospheres Original Research Article

117

Properties of NiO thin films deposited by chemical spray pyrolysis using different precursor solutions

118

Properties of NiO thin films deposited by intermittent spray pyrolysis process

119

Properties of nitrate reductase from seedling leaves of selected barley genotypes

120

Properties of nitrate, sulfate and ammonium in typical polluted atmospheric aerosols (PM10) in Beijing

121

Properties of nitrided layers formed during plasma nitriding of commercially pure Ti and Ti–6Al–4V alloy

122

Properties of nitrogen-doped diamond-like-carbon films prepared by a laser ablation

123

Properties of noble gases and binary mixtures for closed Brayton Cycle applications

124

Properties of nonadiabatic couplings and the generalized Born–Oppenheimer approximation Original Research Article

125

Properties of nonlinear transformations of fractionally integrated processes

126

Properties of nonlocal charges in the supersymmetric two boson hierarchy

127

Properties of non-simultaneous blow-up solutions in nonlocal parabolic equations Original Research Article

128

Properties of nonstoichiometric Pr0.6−xSr0.4MnO3 as the cathodes of SOFCs

129

Properties of novel azodyes containing powerful acceptor groups and thiophene moiety

130

Properties of novel epoxy/clay nanocomposites prepared with a reactive phosphorus-containing organoclay

131

Properties of novel fluorinated compounds and their mixtures as alternative refrigerants

132

Properties of novel Li4−3xCrxSiO4 ceramic electrolyte

133

Properties of novel oligonucleotide analogues containing an acyclic nucleoside and a carbamate linkage

134

Properties of novel polyvinyl alcohol/cellulose nanocrystals/silver nanoparticles blend membranes

135

Properties of novel spherical carbon adsorbents synthesized from phosphorylated polymeric precursors

136

Properties of novel spherical carbon adsorbents synthesized from phosphorylated polymeric precursors

137

Properties of novel yellow anthraquinone dichroic dyes with naphthylthio groups for guest–host liquid crystal displays

138

Properties of n-type hydrogenated nanocrystalline cubic silicon carbide films deposited by VHF-PECVD at a low substrate temperature

139

Properties of n-type polycrystalline silicon solar cells formed by aluminium induced crystallization and CVD thickening

140

Properties of nuclear and neutron matter in a nonlinear σ–ω–ρ mean-field approximation with self- and mixed-interactions Original Research Article

141

Properties of nuclei near the neutron-drip line in O – Si region Original Research Article

142

Properties of nylon 12 balloons after thermal and liquid carbon dioxide treatments

143

Properties of oblique dual frames in shift-invariant systems

144

Properties of oceanic lithosphere: Revised plate cooling model predictions

145

Properties of oil and char derived from slow pyrolysis of Tetraselmis chui

146

Properties of oil-in-water emulsions stabilized by β-lactoglobulin in simulated gastric fluid as influenced by ionic strength and presence of mucin

147

Properties of oligopyrrole doped dodecylbenzene–sulfonic acid prepared with different oxidants in reversed microemulsion

148

Properties of olive oil

149

Properties of Omani artificial pozzolana (sarooj)

150

Properties of one-dimensional anharmonic lattice solitons

151

Properties of one-sided Lipschitz multivalued maps Original Research Article

152

Properties of optical and electrical signals of self-quenching streamer mode in coexistence region

153

Properties of optical and electrical signals of self-quenching streamer mode in coexistence region

154

Properties of optical phonons in Zn1−x−yMgyBexSe quaternary mixed crystal

155

Properties of optical transition radiation and Vavilov–Cherenkov radiation for charged particle inclined flight through a plate of metal

156

Properties of optical transition radiation and Vavilov–Cherenkov radiation for charged particle inclined flight through a plate of metal

157

Properties of optimal forecasts under asymmetric loss and nonlinearity

158

Properties of optimal polynomial designs under smoothing spline models

159

Properties of optimal schedules in preemptive shop scheduling Original Research Article

160

Properties of optimal survivable paths in a graph

161

Properties of organic and acid sulfate soils and water of a ‘reclaimed’ tidal backswamp in Central Kalimantan, Indonesia

162

Properties of organic coatings depending on chemical composition and structure of pigment particles

163

Properties of organic matter in PM2.5 at Changdao Island, China—A rural site in the transport path of the Asian continental outflow

164

Properties of organic matter in soil solution in a German fen area as dependent on land use and depth

165

Properties of organic matter precipitated from acidic forest soil solutions

166

Properties of organosoluble aromatic polyimides from 3′-trifluoromethyl-3,4′-oxydianiline

167

Properties of oriented and graded PZT thin films

168

Properties of osteoconductive biomaterials: Calcium phosphate cement with different ratios of platelet-rich plasma as identifiers

169

Properties of oxide thin films and their adsorption behavior studied by scanning tunneling microscopy and conductance spectroscopy

170

Properties of oxidized phospholipid monolayers: An atomistic molecular dynamics study

171

Properties of oxygen permeation and partial oxidation of methane in La0.6Sr0.4CoO3−δ (LSC)–La0.7Sr0.3Ga0.6Fe0.4O3−δ (LSGF) membrane

172

Properties of oxygen sites at the MoO3(0 1 0) surface: density functional theory cluster studies and photoemission experiments

173

Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio

174

Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio Original Research Article

175

Properties of paints with hematite coated muscovite and talc particles

176

Properties of palladium doped tin oxide thin films for gas sensors grown by PLD method combined with sputtering process

177

Properties of paper coated with kaolin: The influence of the rheological modifier

178

Properties of Paper Manufactured from Kenaf as Function of Alkaline pH Medium and Retention of Precipitated Calcium Carbonate

179

Properties of parallelotopes equivalent to Voronoi’s conjecture

180

Properties of partially purified leaf ornithine aminotransferase of Brassica juncea under salt stress

181

PROPERTIES OF PARTICLEBOARD MADE FROM CHILI PEPPER STALKS

182

Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometry

183

Properties of Particleboard Made from UF with Low-formaldehyde (E1)

184

Properties of particleboard produced with liquefaction-modified phenol-formaldehyde adhesive

185

Properties of particleboard produced with liquefaction-modified phenol-formaldehyde adhesive

186

Properties of partition wall blocks prepared with fresh concrete wastes

187

Properties of partition wall blocks prepared with high percentages of recycled clay brick after exposure to elevated temperatures

188

Properties of passive film formed on CP titanium, Ti–6Al–4V and Ti–13.4Al–29Nb alloys in simulated human body conditions

189

Properties of Pb(Zr, Ti)O3 fibres with a radial gradient structure Original Research Article

190

Properties of PbS nanocrystals embedded in zirconia sol–gel film

191

Properties of PbS thin films grown on glass and layered GaSe crystal substrates by chemical bath deposition

192

Properties of Peanut Protein Film: Sorption Isotherm and Plasticizer Effect

193

Properties of PECVD-deposited thermal barrier coatings

194

Properties of pediatric patients with bilateral amblyopia

195

Properties of PEDOT:PEG/ZnO/p-Si heterojunction diode

196

Properties of PEMs based on cross-linked sulfonated poly(ether ether ketone)

197

Properties of Perfluorobenzene near the Critical Point

198

Properties of peripheral blood and cord blood stem cells

199

Properties of pervious geopolymer concrete using recycled aggregates

200

Properties of phase separation method synthesized superhydrophobic polystyrene films

201

PROPERTIES OF PHASE SHIFT DEFECTS IN ONE-DIMENSIONAL RUGATE PHOTONIC STRUCTURES

202

Properties of Phenoloxidases Generated from Prophenoloxidase with 2-Propanol and the Natural Activator in Drosophila melanogaster

203

Properties of Phonological Markers That Affect the Acquisition of Gender-Like Subclasses,,

204

Properties of phosphatidylcholine in the presence of its monofluorinated analogue Original Research Article

205

Properties of phosphorus retention in sediments under different hydrological regimes: A laboratory-scale simulation study

206

Properties of phosphorus-related defects induced by γ-rays and pulsed X-ray irradiation in germanosilicate optical fibers

207

Properties of photocatalysts with tunnel structures: formation of a surface lattice O− radical by the UV irradiation of BaTi4O9 with a pentagonal-prism tunnel structure

208

Properties of photoconductive In Se thin films, crystallized by 2 3 post-deposition heat treatment in nitrogen atmosphere

209

Properties of phthalonitrile monomer blends and thermosetting phthalonitrile copolymers

210

Properties of phylogenetic trees generated by Yule-type speciation models

211

Properties of physisorbed water layers on gold revealed in a FEM study

212

Properties of piezoelectric actuator on silicon membrane, prepared by screen printing method

213

Properties of piezoelectric ceramic with textured structure for energy harvesting

214

Properties of pistachio-nut-shell activated carbons subjected to vacuum pyrolysis conditions

215

Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer

216

Properties of plain concrete made with mixed recycled coarse aggregate

217

Properties of plain weave metallic wire mesh screens

218

Properties of plasma sprayed boron carbide protective coatings for the first wall in fusion experiments

219

Properties of plasma sprayed La2Zr2O7 coating fabricated from powder synthesized by a single-step solution combustion method

220

Properties of plasma sprayed yttria stabilized zirconia thermal barrier coating prepared from co-precipitation synthesized powder

221

Properties of plasma-spray coated hydroxyapatite on carbon/carbon composites pretreated by an argon plasma

222

Properties of plastic scintillators after irradiation

223

Properties of plastic scintillators after irradiation

224

Properties of plutonium and its alloys for use as fast reactor fuels

225

Properties of plywood manufactured from compressed veneer as building material

226

Properties of PMMA artificially aged

227

Properties of PMN–PT fibres fabricated using powder of PMN–PT single crystals

228

Properties of poly (N,N-dimethylaminoethyl methacrylate)/polysulfone positively charged composite nanofiltration membrane

229

Properties of poly(2-hydroxyethyl acrylate)-silica nanocomposites obtained by the sol–gel process

230

Properties of Poly(ADP-ribose) Glycohydrolase Purified from Pig Testis Nuclei

231

Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites

232

Properties of poly(vinyl alcohol) fiber reinforced high-performance organic aggregate cementitious material: Converting brittle to plastic

233

Properties of poly(vinyl butyral)/TiO2 nanocomposites formed by sol–gel process

234

Properties of poly-aminophenylboronate coatings in capillary electrophoresis for the selective separation of diastereoisomers and glycoproteins

235

Properties of Polyaniline Synthesized in Ionic Liquid (l-Ethyl-3-methylimidazolium-ethyl sulphate).

236

Properties of polyaniline/ordered mesoporous carbon composites as electrodes for supercapacitors

237

Properties of polyaniline/ordered mesoporous carbon composites as electrodes for supercapacitors

238

Properties of Polyanilines Containing Oxyethylene Units

239

Properties of polycrystalline silicon films obtained by rapid thermal processing for micromechanical sensors

240

Properties of polycrystalline SrRuO3 thin films on Si substrates

241

Properties of polyelectrolyte complex membranes based on some weak polyelectrolytes

242

Properties of polyelectrolyte–surfactant complexes obtained by polymerization of an ionic monomer in a solution of an oppositely charged surfactant

243

Properties of polyethersulfone ultrafiltration membranes modified by polyelectrolytes Original Research Article

244

Properties of polyethylene-layered silicate nanocomposites prepared by melt intercalation with a PP-g-MA compatibilizer

245

Properties of polyketone/polypropylene blends

246

Properties of polylactic acid composites reinforced with oil palm biomass microcrystalline cellulose

247

Properties of polymer chains in confinement. Monte Carlo simulations

248

Properties of Polymer Concrete Using Fly Ash

249

Properties of polymer conducting thin layers on the surface of microporous polyethylene films

250

Properties of Polymer Modified Bitumen after Rubber-Bitumen Interaction

251

Properties of polymer modified steel fiber-reinforced cement concretes

252

Properties of polymer sandwich brushes

253

Properties of polymer/clay interphase in nanoparticles synthesized through in-situ polymerization processes

254

Properties of polymer-modified cement mortar using pre-enveloping method

255

Properties of polymer-modified mortars using epoxy and acrylic emulsions

256

Properties of polymer–nanoparticle composites

257

Properties of polymers adsorbed on solid surfaces

258

Properties of polyphenol oxidase from Anamur banana (Musa cavendishii)

259

Properties of polypropylene composites filled with a mixture of household waste of mate-tea and wood particles

260

Properties of polypropylene fiber reinforced silica fume expansive-cement concrete

261

Properties of polypropylene/polyamide nanocomposites prepared by melt processing with a PP-g-MAH compatibilizer

262

Properties of polypyrrole prepared by chemical polymerization using aqueous solution containing Fe2(SO4)3 and anionic surfactant

263

Properties of polystyrene/poly(dimethyl siloxane) blends partially compatibilized with star polymers containing a γ-cyclodextrin core and polystyrene arms

264

Properties of polyurethane elastomers and composites by thermal analysis

265

Properties of polyurethane–polystyrene graft copolymer membranes used for separating water–ethanol mixtures

266

Properties of polyvinyl alcohol/xylan composite films with citric acid

267

Properties of poly-β-aminoanthraquinone modified carbon fiber electrode as a basis for hemoglobin biosensors

268

Properties of pore structure of thin-layer external plasters under ageing in simulated environment

269

Properties of porous carbons prepared from the wood of Japanese Cypress — Effect of carbonization time at 900 °C

270

Properties of porous concrete from waste crushed concrete (recycled aggregate)

271

Properties of porous glasses with embedded ferroelectric materials

272

Properties of porous magnesium prepared by powder metallurgy

273

Properties of porous silica glasses prepared via sol–gel process

274

Properties of Portland cement mortars incorporating high amounts of oil-fuel ashes

275

Properties of Portland cement-modified asphalt binder using Superpave tests

276

Properties of positive definite solutions of the equation X + A*X−2A = I Original Research Article

277

Properties of positive harmonic functions on the half-space with a nonlinear boundary condition

278

Properties of positive solutions to a class of four-point boundary value problem of Caputo fractional differential equations with a parameter

279

Properties of positive solutions to an elliptic equation with negative exponent

280

Properties of potential probiotic Lactobacillus plantarum strains Original Research Article

281

Properties of prefabricated building materials produced from ground pumice aggregate and binders

282

Properties of pregelatinized rice flour made by hot air or gum puffing

283

Properties of premixed hydrogen/propane/air flame in ceramic granular beds

284

Properties of Prior and Posterior Distributions for Multivariate Categorical Response Data Models

285

Properties of products for flatness in the category of S-posets

286

Properties of projectile-fragments in the 40Ar + 27Al reaction at 44 A MeV. Comparison with a multisequential decay model Original Research Article

287

Properties of proportional mean residual life model

288

Properties of protease extracted from tea-field soil

289

Properties of protease-treated maize starches

290

Properties of protection goals and their integration into a user interface

291

Properties of protein adsorption onto pore surface during microfiltration: Effects of solution environment and membrane hydrophobicity

292

Properties of protein powder prepared from Cape hake by-products Original Research Article

293

Properties of proteins in cancer procoagulant preparations that are detected by anti-tissue factor antibodies

294

Properties of proteolytic enzyme from ginger (Zingiber officinale Roscoe)

295

Properties of Pt Schottky type contacts on high-resistivity CdZnTe detectors

296

Properties of Pt Schottky type contacts on high-resistivity CdZnTe detectors

297

Properties of Pt/C and Pd/C catalysts prepared by reduction with hydrogen of adsorbed metal chlorides: Influence of pore structure of the support Original Research Article

298

Properties of Pt/C catalysts prepared by adsorption of anionic precursor and reduction with hydrogen. Influence of acidity of solution Original Research Article

299

Properties of Pt-based electrocatalysts containing selectively deposited Sn as the anode for polymer electrolyte membrane fuel cells

300

Properties of pullulan-based blend films as affected by alginate content and relative humidity

301

Properties of pulse plated ZnSe films

302

Properties of pulsed electrodeposited CdIn2S4 thin film

303

Properties of pulsed laser deposited boron nitride films

304

Properties of pulsed laser deposited fluorinated hydroxyapatite films on titanium

305

Properties of pulsed laser deposited optical coatings

306

Properties of pure alkanes, ethers and their mixtures by a hole model group-contribution equation of state

307

Properties of purified direct steam grown silicon thermal oxides

308

Properties of PWA/ZrO2-doped phosphosilicate glass composite membranes for low-temperature H2/O2 fuel cell applications

309

Properties of Pyrethroids-Treated Particleboards Manufactured from Rubberwood and Oil Palm Empty Fruit Bunches (EFB)

310

Properties of Q-Reflexive Banach Spaces

311

Properties of quadratic equations and their application to power system analysis

312

Properties of quasi-two-dimensional superconductors near a SDW instability: application to ET-salts

313

Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method

314

Properties of quinoa and oat spaghetti loaded with carboxymethylcellulose sodium salt and pregelatinized starch as structuring agents

315

Properties of quinoa and oat spaghetti loaded with carboxymethylcellulose sodium salt and pregelatinized starch as structuring agents

316

Properties of radio frequency magnetron sputtered silicon dioxide films

317

Properties of rare earth oxide doped translucent polycrystalline alumina

318

Properties of RD-projective and RD-injective modules

319

Properties of reaction zones associated with decay from pruning wounds in plantationgrown Eucalyptus nitens

320

Properties of reaction-bonded SiC/Si3N4 ceramics

321

Properties of Reactive Magnetron Sputtered ITO Films without in-situ Substrate Heating and Post-deposition Annealing

322

Properties of reactively sputtered W–Si–N films

323

Properties of recoverable region and semi-global stabilization in recoverable region for linear systems subject to constraints

324

Properties of recovered solids from stick-water treated by centrifugation and pH shift

325

Properties of recursive trend-adjusted unit root tests

326

Properties of recycled ceramic aggregate concretes: Water resistance

327

Properties of red Oxisols on calcareous sedimentary rocks in Thailand

328

Properties of Red Sea coastal currents

329

Properties of red tilapia (Oreochromis niloticus) protein based film as affected by cryoprotectants

330

Properties of red-emitting phosphors Sr2MgSi2O7:Eu3+ prepared by gel-combustion method assisted by microwave

331

Properties of regioregular poly(3-octylthiophene)/multi-wall carbon nanotube composites

332

Properties of Regular Uniform k—Stratified Graphs

333

Properties of reinforced boron carbide laminar composites

334

Properties of renormalization group transformations Original Research Article

335

Properties of Resin Impregnated Oil Palm Wood (Elaeis Guineensis Jack)

336

Properties of resorcinol–tannin–formaldehyde copolymer resins prepared from the bark extracts of Taiwan acacia and China fir

337

Properties of restructured beef steaks from forage- and grain-fed cattle as affected by antioxidant and flavoring agents

338

Properties of retrograded and acetylated starch produced via starch extrusion or starch hydrolysis with pullulanase

339

Properties of RE–W cathode and its application in electrostatic precipitation for high temperature gas clean-up

340

Properties of RF magnetron sputtered 0.95 (Na0.5Bi0.5)TiO3–0.05 BaTiO3 thin films

341

Properties of rigid-line inclusions as building blocks of naturally occurring composites

342

PROPERTIES OF RING EXTENSIONS INVARIANT UNDER GROUP ACTION

343

Properties of risk-sensitive filters/estimators

344

Properties of RNase A Immobilized on Magnetic Poly(2-hydroxyethyl methacrylate) Microspheres

345

Properties of Roman bricks and mortars used in Serapis temple in the city of Pergamon

346

Properties of rosin-based waterborne polyurethanes/cellulose nanocrystals composites

347

Properties of rubberized concretes containing silica fume

348

Properties of rubberlike materials under large deformations explained by self-organizing linkage patterns

349

Properties of rule interestingness measures and alternative approaches to normalization of measures

350

Properties of rutile TiO2 surfaces from a Tight-Binding Variable-Charge model. Comparison with ab initio calculations

351

Properties of saturated fluorocarbons: Experimental data and modeling using perturbed-chain-SAFT

352

Properties of Savitzky–Golay digital differentiators

353

Properties of SBT films crystallized by pulsed excimer (KrF) laser annealing

354

Properties of scalar-isoscalar mesons from multichannel interaction analysis below 1800 MeV Original Research Article

355

Properties of Schur complements in partitioned idempotent matrices

356

Properties of seasonal long memory processes

357

Properties of seawater bitterns with regard to liquid-desiccant cooling Original Research Article

358

Properties of sediment NOM collected from a drinking water reservoir in South China, and its association with THMs and HAAs formation

359

Properties of selected subset diagnostics in regression

360

Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells

361

Properties of self-compacting concrete containing class F fly ash

362

Properties of self-compacting concrete mixtures containing metakaolin and blast furnace slag

363

Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates

364

Properties of self-compacting concrete prepared with coarse recycled concrete aggregate

365

Properties of self-compacting concrete prepared with recycled glass aggregate

366

Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume

367

Properties of self-compacting mortar made with various types of sand

368

Properties of self-compacting-concrete containing fly ash subjected to elevated temperatures

369

Properties of self-consolidating concrete made utilizing alternative mineral fillers

370

Properties of Self-Consolidating Concrete Produced Using Local Algerian Materials

371

Properties of self-organized CdSe quantum dots on an atomically flat 111/A ZnSe surface

372

Properties of self-reinforced ultra-high-molecular-weight polyethylene composites

373

Properties of semi-chiral superfields Original Research Article

374

Properties of semiconducting rhenium silicide thin films grown epitaxially on silicon (111)

375

Properties of semiconductor scintillator ZnSe:O

376

Properties of semiconductor scintillator ZnSe:O

377

Properties of Sensitive Materials Mainly Composed of ZnO

378

Properties of several glycidyl methacrylate–triallyl isocyanurate based affinity adsorbents for removing circulating immune complexes

379

Properties of several types of novel counter electrodes for dye-sensitized solar cells

380

Properties of several varieties of CuGaS2 microcrystals

381

Properties of severe plastically deformed Mg alloys

382

Properties of shell-like assemblies of weakly charged Keplerate-type polyoxometalates

383

Properties of shock-compressed liquid krypton at pressures of up to 90 GPa

384

Properties of Si/SiC ceramic composite subjected to chemical vapour infiltration

385

Properties of Si3N4–TiN composites fabricated by spark plasma sintering by using a mixture of Si3N4 and Ti powders

386

Properties of SiAlON powder phosphors for white LEDs

387

Properties of Si–C–N films prepared on Si substrate using cobalt interfacial layers

388

Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process

389

Properties of silicious film on polycarbonate substrate prepared by vacuum ultraviolet irradiation: Effect of intermediate silane layer

390

Properties of silicon and silicon-carbon cluster assembled films

391

Properties of silicon doped silicon dioxide thin films deposited by Co-sputtering of silicon and silicon dioxide

392

Properties of silicon germanium and SiGe: carbon [Book Review]

393

Properties of silicon nanolayers on insulator

394

Properties of silicon nitride for aluminum melts prepared by nitrided pressureless sintering

395

Properties of silicon pulse doped InGaP layers grown by LP-MOCVD

396

Properties of silicon pulse doped InGaP layers grown by LP-MOCVD

397

Properties of silicon-carbon mixed clusters: A systematic abinitio study

398

Properties of silorane-based dental resins and composites containing a stress-reducing monomer

399

Properties of silsesquioxane coating modified carbon fibre/polyarylacetylene composites

400

Properties of silver-filled acrylate photopolymer layers prepared by a heterogeneous photocatalytic polymerisation reaction

401

Properties of similarity solutions for flows in turbulent vortex cores

402

Properties of simulated cosmic matters after gamma-ray and neutron irradiation

403

Properties of single and dual matrix aluminum–carbon nanotube composites processed via spark plasma extrusion (SPE)

404

Properties of single layer and gradient (Ti,Al)N coatings

405

Properties of single layer and gradient (Ti,Al)N coatings

406

Properties of single shear layer instabilities and vortex-induced excitation mechanisms of thick plates

407

Properties of single-wall carbon nanotubes

408

Properties of single-walled carbon nanotube-based aerogels as a function of nanotube loading Original Research Article

409

Properties of sintered amethyst pellets as thermoluminescent dosimeters

410

Properties of sintered glass-ceramics in the diopside–albite system

411

Properties of sintered low calcium bottom ash aggregate with clay binders

412

Properties of sintered mullite and cordierite pressed bodies manufactured using Al-rich anodising sludge

413

Properties of SiO2 and Al2O3 films for electrical insulation applications deposited by reactive pulse magnetron sputtering

414

Properties of SiOxNy thin film deposited by low temperature plasma enhanced chemical vapor deposition using TEOS–NH3–O2–N2 gas mixtures

415

Properties of SixNy thin film deposited by plasma enhanced chemical vapor deposition at low temperature using SiH4/NH3/Ar as diffusion barrier film

416

Properties of size-tuned PbS nanocrystals stabilized in a polymer template

417

Properties of slurries made of fast pyrolysis oil and char or beech wood

418

Properties of Sm2O3–ZrO2 composite oxides and their catalytic performance in isosynthesis Original Research Article

419

Properties of SnO2 based gas-sensing thin films prepared by ink-jet printing

420

Properties of snow overlying the sea ice off East Antarctica in late winter, 2007

421

Properties of soapnut (Sapindus mukorossi) oil biodiesel and its blends with diesel

422

Properties of sodium lignosulfonate as dispersant of coal water slurry

423

Properties of sodium-based ternary phosphate glasses produced from readily available phosphate salts

424

Properties of soil organic matter and aqueous extracts of actually water repellent and wettable soil samples

425

Properties of soil pockets on arid Nama Karoo inselbergs–the effect of geology and derived landforms

426

Properties of solar wind turbulence near the Sun as deduced from coronal radio sounding experiments Original Research Article

427

Properties of solar X-ray flares and proton event forecasting Original Research Article

428

Properties of sol–gel derived Al2O3–15 wt.% ZrO2 (3 mol% Y2O3) nanopowders using two different precursors

429

Properties of sol–gel derived mesoporous aluminas as metal traps Original Research Article

430

Properties of sol–gel dip-coated zinc oxide thin films Original Research Article

431

Properties of solgel synthesized multiphase TiO2 (AB)ZnO (ZW) semiconductor nanostructure: An effective catalyst for methylene blue dye degradation

432

Properties of solid state devices with mobile ionic defects. Part I: The effects of motion, space charge and contact potential in metal|semiconductor|metal devices

433

Properties of soluble α-chymotrypsin in neat glycerol and water

434

Properties of solutions of higher order difference equations

435

Properties of solutions of stochastic differential equations with continuous-state-dependent switching

436

Properties of solutions to a class of differential models incorporating Preisach hysteresis operator

437

Properties of solvent extracted low-oil corn distillers dried grains with solubles

438

Properties of some bilinear models with periodic regime switching

439

Properties of some blind equalization criteria in noisy multiuser environments

440

Properties of Some Commercial Honeys Available in Mexican Market: Effect of Overheating on Quality of the Packaged Honey

441

Properties of some convolution algorithms for the thermal analysis of semiconductor devices

442

Properties of Some Egyptian Rice Hybrids as Affected by Parboiling Process

443

Properties of some ferrocene macrocyclic dioxotetraamines: the roles of aromatic side-arms

444

Properties of some ILP formulations of a class of partitioning problems Original Research Article

445

Properties of some novel monoazo disperse dyes derived from ester-substituted tetrahydroquinoline and indoline coupling components

446

Properties of some statistics for AR-ARCH model with application to technical analysis

447

Properties of some thermally modified wood species

448

Properties of soy protein isolate/polycaprolactone blends compatibilized by methylene diphenyl diisocyanate

449

Properties of Space-Time Codes for Frequency-Selective Channels .

450

Properties of spatial attention in conscious and nonconscious visual information processing

451

Properties of Spatial Cox Process Models

452

Properties of spatial cross-periodograms using fixed-domain asymptotics

453

Properties of SPEEK based membranes modified with a free radical scavenger

454

Properties of SPEEK based PEMs for fuel cell application

455

Properties of spin- transverse Ising model with anisotropic crystal field on a honeycomb lattice

456

Properties of spray deposited Cu2ZnSnS4 (CZTS) thin films

457

Properties of spray deposited Cu2ZnSnS4 (CZTS) thin films

458

Properties of spray deposited titanium dioxide thin films and their application in photoelectrocatalysis

459

Properties of spray-deposited CdIn2Se4 thin films for photovoltaic applications

460

Properties of spray-dried food flavours microencapsulated with two-layered membranes: Roles of interfacial interactions and water

461

Properties of sputter-deposited MoS2/metal composite coatings deposited by closed field unbalanced magnetron sputter ion plating

462

Properties of sputter-deposited Ni–Mn–Ga thin films

463

Properties of squeeze cast Mg-6Zn-3Cu alloy and its saffil alumina short fibre reinforced composites

464

Properties of Sr2FeMoO6 thin films fabricated by the chemical solution deposition method

465

Properties of stabilized/solidified admixtures of cement and sewage sludge

466

Properties of Stabilizing PID Gain Set in Parameter Space

467

Properties of starch based blends. Part 2. Influence of poly vinyl alcohol addition and photocrosslinking on starch based materials mechanical properties

468

Properties of starches from cocoyam (Xanthosoma sagittifolium) tubers planted in different seasons

469

Properties of Starches from Near-Isogenic Wheat Lines with Different Wx Protein Deficiencies.

470

Properties of Starches from Several Low-Amylose Rice Cultivars.

471

Properties of starches separated from potatoes stored under different conditions

472

Properties of starch–hydroxypropyl methylcellulose based films obtained by compression molding

473

Properties of static limit and rotating equilibrium sequences of compact stars: Systematic correlations and constraints Original Research Article

474

Properties of stationary solutions of a generalized Tjon–Wu equation

475

Properties of steel fiber reinforced fly ash concrete

476

Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state

477

Properties of steel foundry electric arc furnace dust solidified/stabilized with Portland cement

478

Properties of Stein (Lyapunov) iterations for solving a general Riccati equation Original Research Article

479

Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading

480

Properties of strained and unstrained III-nitrides

481

Properties of strained and unstrained III-nitrides

482

Properties of Structural Lightweight Concrete Filled with Palm-Based Polyurethane

483

Properties of structured coronal mass ejections in solar cycle 23 Original Research Article

484

Properties of subcritical water as an eluent for reversed-phase liquid chromatography—Disruption of the hydrogen-bond network at elevated temperature and its consequences

485

PROPERTIES OF SUBGROUPS OF SOLVABLE GROUPS THAT IMPLY THEY ARE NORMALLY EMBEDDED

486

Properties of submicron AlN particulate reinforced aluminum matrix composite

487

Properties of successive horizons in a thick forest floor (mor) reflect a sequence of soil acidification

488

Properties of sugarcane waste-derived bio-oils obtained by fixed-bed fire-tube heating pyrolysis

489

Properties of sulfonated poly(arylene ether sulfone)/electrospun nonwoven polyacrylonitrile composite membrane for proton exchange membrane fuel cells

490

Properties of superconducting, polycrystalline dysprosium-doped Bi1.6Pb0.5Sr2−xDyxCa1.1Cu2.1O8+δ (0 ≤ x ≤ 0.5)

491

Properties of superdeformed bands in 153Dy

492

Properties of superhard nc-TiN/a-BN and nc-TiN/a-BN/a-TiB2 nanocomposite coatings prepared by plasma induced chemical vapor deposition

493

Properties of superimposed BIBDs

494

Properties of surface dielectric barrier discharge plasma generator for fabrication of nanomaterials

495

Properties of surface layers produced on the Ti–6Al–3Mo–2Cr titanium alloy under glow discharge conditions

496

Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate

497

Properties of Sustainable Concrete with Mussel Shell Waste Powder

498

Properties of symmetric matrices

499

Properties of synchronization in the systems of non-identical coupled van der Pol and van der Pol–Duffing oscillators. Broadband synchronization

500

Properties of syndiotactic polystyrene composites with surface modified short Kevlar fiber

501

Properties of Ta2O5 thin films prepared by ion-assisted deposition

502

Properties of Ta–Mo alloy gate electrode for n-MOSFET

503

Properties of tandem balloons connected by extendable suspension wires Original Research Article

504

Properties of test statistics applied to residuals in failure time models

505

Properties of tests for spatial error components

506

Properties of the (Y0.75Gd0.25)2O3:Eu3+ Scintillating Nanopowder

507

Properties of the “non-extensive Gaussian” entropy

508

Properties of the “Non-Free” Shock Wave/Boundary Layer Interaction on a Swept Plate

509

Properties of the 12C 10 MeV state determined through β-decay Original Research Article

510

Properties of the 2003 Lefkada, Ionian Islands, Greece, Earthquake Seismic Sequence and Seismicity Triggering

511

Properties of the active plum pox potyvirus RNA polymerase complex in defined glycerol gradient fractions

512

Properties of the active plum pox potyvirus RNA polymerase complex in defined glycerol gradient fractions [Virus Research 37 (1995) 127–137]

513

Properties of the Aftershock Sequences of the 2003 Bingöl, M D = 6.4, (Turkey) Earthquake

514

Properties of the aggregation operators related with fuzzy relations

515

Properties of the ammonium form of Versatic 10 in a liquid-liquid extraction system

516

Properties of the ammonium form of Versatic 10 in a liquid-liquid extraction system

517

Properties of the amphiphilic films in mixed cationic/anionic vesicles: a comprehensive view from a literature analysis

518

Properties of the asymptotic nA + mB -> C reaction-diffusion fronts

519

Properties of the autoclaved aerated concrete produced from coal bottom ash

520

Properties of the automorphism group and a probabilistic construction of a class of countable labeled structures

521

Properties of the avalanche photodiodes for the CMS electromagnetic calorimeter

522

Properties of the avalanche photodiodes for the CMS electromagnetic calorimeter

523

Properties of the bare, passivated and doped germanium nanowire: A density-functional theory study

524

Properties of the Beta Subunit of the Proteasome Activator PA28 (11S REG)

525

Properties of the Brightest Cluster Galaxy and Its Host Cluster

526

Properties of the Brualdi–Li tournament matrix Original Research Article

527

Properties of the cathode lens combined with a focusing magnetic/immersion-magnetic lens

528

Properties of the cathode lens combined with a focusing magnetic/immersion-magnetic lens

529

Properties of the center of gravity as an algorithm for position measurements

530

Properties of the center of gravity as an algorithm for position measurements

531

Properties of the center of gravity as an algorithm for position measurements: two-dimensional geometry

532

Properties of the center of gravity as an algorithm for position measurements: two-dimensional geometry

533

Properties of the Characteristic Polynomials of and

534

Properties of the circumstellar dust in galactic FSCMa objects

535

Properties of the clathrates of hydrogen and developments in their applicability for hydrogen storage

536

Properties of the closed-system equilibration model for dissolved noble gases in groundwater

537

Properties of the coating deposited with the diffusion of Mo O2 oxidized powder using the APS process

538

Properties of the commensurate spin-density-waves

539

Properties of the composite quadratic Lyapunov functions

540

Properties of the cross-linked composite polymer electrolytes using hyperbranched polymer with terminal acryloyl groups

541

Properties of the Cu(In,Ga)Se2 absorbers deposited by electron-beam evaporation method for solar cells

542

Properties of the CUE estimator and a modification with moments

543

Properties of the CUE estimator and a modification with moments

544

Properties of the density for a three-dimensional stochastic wave equation

545

Properties of the descent algebras of type D

546

Properties of the deuterated target material used by the SMC

547

Properties of the dust cloud caused by the Deep Impact experiment

548

Properties of the dust cloud caused by the Deep Impact experiment

549

Properties of the exciting source of the outflow in iras 20231+3440 region

550

Properties of the frequency operator do not imply the quantum probability postulate

551

Properties of the fuzzy composition based on aggregation operators

552

Properties of the GEM, double GEM and GEM+MGC combination

553

Properties of the GEM, double GEM and GEM+MGC combination

554

Properties of the generalised fuzzy aggregation operators

555

Properties of the GeS2–Ga2S3–CsCl–GeO2 oxy-chalcohalide glasses

556

Properties of the graphite-lithium anode in N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide as an electrolyte

557

Properties of the hard pomeron with a running coupling constant and the high-energy scattering

558

Properties of the Hermean regolith: I. Global regolith albedo variation at 200 km scale from multicolor CCD imaging

559

Properties of the Hermean Regolith: II. Disk-Resolved Multicolor Photometry and Color Variations of the “Unknown” Hemisphere

560

Properties of the hermean regolith: iii. disk-resolved vis–NIR reflectance spectra and implications for the abundance of iron☆

561

Properties of the Hermean regolith: IV. Photometric parameters of Mercury and the Moon contrasted with Hapke modelling

562

Properties of the Hermean regolith: V. New optical reflectance spectra, comparison with lunar anorthosites, and mineralogical modelling

563

Properties of the heterojunction between poly(dithienopyrrole)-poly(vinylchloride) composite and n-doped silicon

564

Properties of the high area-to-mass ratio space debris population at high altitudes Original Research Article

565

Properties of the His57–Asp102Dyad of Rat Trypsin D189S in the Zymogen, Activated Enzyme, and α1-Proteinase Inhibitor Complexed Forms

566

Properties of the histones and functional aspects of the soluble chromatin of epimastigote Trypanosoma cruzi

567

Properties of the Holmes space

568

Properties of the Hopkins Symptom Checklist-25 (HSCL-25) and the Self-Reporting Questionnaire (SRQ-20) as screening instruments used in primary care in Afghanistan

569

Properties of the hybrid RANS/LES filter

570

Properties of the imaging performance of an electron optical system for SEM

571

Properties of the imaging performance of an electron optical system for SEM

572

Properties of the implicitly time-differenced equations of thermal radiation transport

573

Properties of the infrared dark cloud G79.2+0.38

574

Properties of the in-gap states in SmB6

575

Properties of the Interaction of Arf-like Protein 2 with PDEδ

576

Properties of the interstellar medium and the propagation of cosmic rays in the Galaxy

577

Properties of the Iranian Isolate of Bermudagrass Etched-line Virus

578

Properties of the Ising magnet confined in a corner geometry

579

Properties of the isoforms of α-amylase from kilned and unkilned malted sorghum (Sorghum bicolor)

580

Properties of the isoforms of α-amylase from kilned and unkilned malted sorghum (Sorghum bicolor)

581

Properties of the lignosulfonate–surfactant complex phase

582

Properties of the limit shape for some last-passage growth models in random environments

583

Properties of the longest-edge -section refinement scheme for triangular meshes

584

Properties of the lunar exosphere during the Perseid 2009 meteor shower

585

Properties of the magnon populations in the super lattice [Fe/GaAs]

586

Properties of the marginal survival functions for dependent censored data under an assumed Archimedean copula

587

Properties of the matrix A − XY*

588

Properties of the maximum q-likelihood estimator for independent random variables

589

Properties of the M-Harmonic Conjugate Operator

590

Properties of the Michaelis–Menten mechanism in phase space

591

Properties of the mixed adsorption layer: neutral detergent-tetramethylthiourea at interface electrode/solution

592

Properties of the modified cellulosic fabrics using polyurethane acrylate copolymers

593

Properties of the most recent avalanche photodiodes for the CMS electromagnetic calorimeter

594

Properties of the most recent avalanche photodiodes for the CMS electromagnetic calorimeter

595

Properties of the most recent Hamamatsu avalanche photodiode

596

Properties of the most recent Hamamatsu avalanche photodiode

597

Properties of the multi-layer Ti/CrN and Ti/TiAlN coatings deposited with the PVD technique onto the brass substrate

598

Properties of the multiple lot-sizing problem with rigid demand, general cost structures, and interrupted geometric yield

599

Properties of the multiple lot-sizing problem with rigid demands and general yield distributions

600

Properties of the n=3 Ruddlesden-Popper Phases Sr4Mn3-xFexO10-delta (x= 1, 1.5, 2)

601

Properties of the NBr molecule in argon clusters

602

Properties of the near-field term and its effect on polarisation analysis and source locations of long-period (LP) and very-long-period (VLP) seismic events at volcanoes

603

Properties of the new LuAP:Ce scintillator

604

Properties of the new LuAP:Ce scintillator

605

Properties of the nonequilibrium high-velocity “Tails” of the molecular distribution function in plane couette flow of a compressible gas

606

Properties of the non-soluble fractions of suspended dust over the Dead Sea

607

Properties of the Novel Intermediate Filament Protein Synemin and Its Identification in Mammalian Muscle

608

Properties of the n-overlap vector and n-overlap similarity theory

609

Properties of the Nuclear Proteasome Activator PA28γ (REGγ)

610

Properties of the organic conductor (TMTSF)2Ni(tht)2; relation to the metal bis-diselenolate analogues

611

Properties of the overtone mode of the quartz crystal microbalance in a low-viscosity liquid

612

Properties of the overtone mode of the quartz crystal microbalance in a low-viscosity liquid Original Research Article

613

PROPERTIES OF THE PARTICULATE PHASE IN DEEP SALINE GROUNDWATER IN LAXEMAR, SWEDEN

614

Properties of the path-class expansion in the continuous limit

615

Properties of the peaks of second harmonic light through Fibonacci-class ferroelectric domains ferroelectrics their properties Wave propagation transmission absorption Nonlinear optical crystals

616

Properties of the period function for some Hamiltonian systems and homogeneous solutions of a semilinear elliptic equation

617

Properties of the perovskites, SrMn1-xFexO3-delta (x=1/3, 1/2, 2/3)

618

Properties of the perovskite-type oxide ceramic Ca1 − xLa2x3MnO3 − δ as the cathode active materials in alkaline batteries

619

Properties of the planar ADH-dry-layer structures based on electrically controlled coupling between enzyme molecules and metal surfaces

620

Properties of the PLZTN x/54/46 (0.4 ≤ x ≤ 1.4) ceramic system

621

Properties of the poly(vinyl alcohol)/chitosan blend and its effect on the culture of fibroblast in vitro

622

Properties of the positive solution of a semilinear elliptic partial differential equation in Rn

623

Properties of the power family of fractional age approximations

624

Properties of the Principal Eigenvalues of a General Class of Non-classical Mixed Boundary Value Problems

625

Properties of the probability density function of the non-central chi-squared distribution

626

Properties of the Proteasome Activator Subunit PA28α and its Des-Tyrosyl Analog

627

Properties of the protein matrix revealed by the free energy of cavity formation

628

Properties of the QME under asymmetrically distributed disturbances

629

Properties of the quantized gravitating dust shell

630

Properties of the Quark Gluon Plasma: A Lattice Perspective Original Research Article

631

Properties of the quaternary amorphous alloy Pd40Ni40B10P10

632

Properties of the Rayleigh-distribution for particle sizing from SAS experiments

633

Properties of the reachable set of control systems

634

Properties of the reaction 238Uimage at the vibrational resonances Original Research Article

635

Properties of the recombinant α-glucosidase from Sulfolobus solfataricus in relation to starch processing

636

Properties of the resonant tunneling diode in external magnetic field with inclusion of the Rashba effect

637

Properties of the retention time of ionizable analytes in reversed-phase liquid chromatography under organic modifier gradients in different eluent pHs

638

Properties of the roughness in NiFe/FeMn exchange-biased system

639

Properties of the scale invariant O(g4) Lipatov kernel Original Research Article

640

Properties of the Scattering Transform on the Real Line

641

Properties of the second and third harmonics generation in a quantum disc with inverse square potential. A modeling for nonlinear optical responses of a quantum ring

642

Properties of the semigroup and the approximation of Crandall–Liggett associated with a class of differential equations with delays depending implicitly on the state Original Research Article

643

Properties of the Shannon entropy of arrays of elastic scatterers

644

Properties of the single neutron pixel detector based on the Medipix-1 device

645

Properties of the single neutron pixel detector based on the Medipix-1 device

646

Properties of the singular, inverse and generalized inverse partitioned Wishart distributions

647

Properties of the SiO2/SiC interface investigated by angle resolved studies of the Si 2p and Si 1s levels and the Si KLL Auger transitions

648

Properties of the size-resolved and individual cloud droplets collected in western Japan during the Asian dust storm event

649

Properties of the solar velocity field indicated by motions of coronal bright points

650

Properties of the sol–gel TiO2–SiO2 oxidation catalysts prepared using ethyl silicate 40 as a silica precursor Original Research Article

651

Properties of the Solid Solutions Bi2Cu(Ni)O4±δ

652

Properties of the solution set of evolution inclusions Original Research Article

653

Properties of the solutions of rational matrix difference equations

654

Properties of the solutions of the fourth-order Bessel-type differential equation

655

Properties of the solutions to the Monge–Ampère equation Original Research Article

656

Properties of the spherical 2D electron system in a multielectron bubble in liquid helium

657

Properties of the stainless steel substrate, influencing the adhesion of thermo-resistant streptococci Original Research Article

658

Properties of the streamwise velocity fluctuations in the inertial layer of turbulent boundary layers and their connection to self-similar mean dynamics

659

Properties of the tensor correlation in neutron halo nuclei Original Research Article

660

Properties of the ternary mixtures of fluorocarbon and hydrocarbon nonionic surfactants at the water–air interface

661

Properties of the T-fuzzy factor groups

662

Properties of the thermally stable Al95Cr3.1Fe1.1Ti0.8 alloy prepared by cold-compression at ultra-high pressure and by hot-extrusion

663

Properties of the third order trinomial differential equations with delay argument Original Research Article

664

Properties of the TiN coatings on previously Ti ion-implanted magnesium alloy substrate

665

Properties of the tongue help to define vowel categories: hypotheses based on physiologically-oriented modeling

666

Properties of the Transient Outward Current in Rabbit Sino-atrial Node Cells

667

Properties of the TRIUMF neutron beam

668

Properties of the two-temperature corona model for active galactic nuclei and galactic black hole X-ray Binaries

669

Properties of the Ukraine polystyrene-based plastic scintillator UPS 923A

670

Properties of the Ukraine polystyrene-based plastic scintillator UPS 923A

671

Properties of the USPTO patent citation network: 1963–2002 Original Research Article

672

Properties of the voice transform of the Blaschke group and connections with atomic decomposition results in the weighted Bergman spaces

673

Properties of the WASA pellet target and a stored intermediate-energy beam

674

Properties of the WASA pellet target and a stored intermediate-energy beam

675

Properties of the wealth process in a market microstructure model

676

Properties of the wear resistant coatings deposited on the cemented carbides substrates in the cathodic arc evaporation process

677

Properties of the Weibull cumulative exposure model

678

Properties of the Weierstrass function in the time and frequency domains

679

Properties of the YAP : Ce scintillator

680

Properties of the YAP : Ce scintillator

681

PROPERTIES OF THE YARNS PRODUCED FROM r-PET FIBERS AND THEIR BLENDS

682

Properties of the zeros of generalized hypergeometric polynomials

683

Properties of the Λ(1405) Measured at CLAS Original Research Article

684

Properties of thermal insulation materials during extreme environment changes

685

Properties of thermally conductive micro and nano size boron nitride reinforced silicon rubber composites

686

Properties of thermally oxidized and nitrided Zr-oxynitride thin film on 4H–SiC in diluted N2O ambient

687

Properties of thermally stable PM Al–Cr based alloy

688

Properties of thermodynamic equilibrium-based methane autothermal reforming to generate hydrogen

689

Properties of thermomechanically processed dual-phase steels containing fibrous martensite

690

Properties of thermomechanically processed dual-phase steels containing fibrous martensite

691

Properties of thermomechanically processed dual-phase steels containing fibrous martensite

692

Properties of thermometric NbSi thin films and application to detection in astrophysics

693

Properties of thermometric NbSi thin films and application to detection in astrophysics

694

Properties of thermoplastic polyurethane adhesives containing nanosilicas with different specific surface area and silanol content

695

Properties of thermoplastic rice starch composites reinforced by cotton fiber or low-density polyethylene

696

Properties of thick SiO2/Si structure formed at 120 °C by use of two-step nitric acid oxidation method

697

Properties of thick sputtered Ta used for protective gun tube coatings

698

Properties of thin film silicon, prepared at high growth rate in a wide range of thicknesses

699

Properties of thin manganite films grown on semiconducting substrates for spintronics applications

700

Properties of thin manganite films grown on semiconducting substrates for spintronics applications

701

Properties of thin MgO films grown on single-crystalline CVD diamond

702

Properties of thin polyethylene glycol layers on the surface of silica gel and pyrocarbon/silica gel: Effect of topography and morphology of carbon deposit

703

Properties of thin silver films with different thickness

704

Properties of Three Baculovirus-Expressing Genes That Encode Insect-Selective Toxins: μ-Aga-IV, As II, and Sh I

705

Properties of three purified α-amylases from malted finger millet (Ragi, Eleusine coracana, Indaf-15)

706

Properties of three-layer particleboards made from kenaf (Hibiscus cannabinus L.) and rubberwood (Hevea brasiliensis)

707

Properties of Ti(C,N) cermets synthesized by mechanically induced self-sustaining reaction

708

Properties of Ti1−xSixNy films deposited by concurrent cathodic arc evaporation and magnetron sputtering

709

Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting

710

Properties of TiAlN coatings synthesized by closed-field unbalanced magnetron sputtering

711

Properties of TiBN coating on the tool steels by PECVD and its applications

712

Properties of TiC thin films grown by pulsed laser deposition

713

Properties of TiCNi3Al composites and structural optimization of TiCNi3Al functionally gradient materials

714

Properties of TiCNi3Al composites and structural optimization of TiCNi3Al functionally gradient materials

715

Properties of tilt grain boundaries in ordered alloys

716

Properties of time integration with first order filter damping

717

Properties of TiN and TiZrV thin film as a remedy against electron cloud

718

Properties of TiN and TiZrV thin film as a remedy against electron cloud

719

Properties of TiN films grown by atomic-layer chemical vapor deposition with a modified gaseous-pulse sequence

720

Properties of TiO x Films Prepared by Electron- Beam Evaporation of Titanium and Titanium Suboxides

721

Properties of TiO2 prepared by acid treatment of BaTiO3

722

Properties of TiO2 Thin Films Prepared by Magnetron Sputtering

723

Properties of TiO2–polyacrylic acid dispersions with potential for molecular recognition

724

Properties of tire rubber ash mortar

725

Properties of titanium biomaterial fabricated by sinter-bonding of titanium/hydroxyapatite composite surface-coated layer to pure bulk titanium

726

Properties of titanium biomaterial fabricated by sinter-bonding of titanium/hydroxyapatite composite surface-coated layer to pure bulk titanium

727

Properties of titanium biomaterial fabricated by sinter-bonding of titanium/hydroxyapatite composite surface-coated layer to pure bulk titanium

728

Properties of titanium nitride fabricated on stainless steel by plasma-based ion implantation/deposition

729

Properties of titanium nitride fabricated on stainless steel by plasma-based ion implantation/deposition

730

Properties of titanium nitride films prepared by direct current magnetron sputtering

731

Properties of titanium oxide films obtained by PECVD

732

Properties of titanium oxide synthesized by pulsed metal vacuum arc deposition

733

Properties of titanium thin films deposited by dc magnetron sputtering

734

Properties of titanmm-aluminide layer formed by low pressure plasma spraying

735

Properties of titanmm-aluminide layer formed by low pressure plasma spraying

736

Properties of TmPt(1 1 1) surface alloys

737

Properties of tooth enamel in great apes

738

Properties of topological spaces associated with sigraphs

739

Properties of topologies of information retrieval systems

740

Properties of total domination edge-critical graphs Original Research Article

741

Properties of trans isomers of eicosapentaenoic acid and docosahexaenoic acid methyl esters on cyanopropyl stationary phases

742

Properties of transit trajectory in the restricted three and four-body problem Original Research Article

743

Properties of transmission of electron in coupled rings

744

Properties of transparent yttrium oxide dielectric films prepared by sol–gel process

745

Properties of transportation dynamics on scale-free networks

746

Properties of traveling atmospheric disturbances (TADs) inferred from CHAMP accelerometer observations Original Research Article

747

Properties of treated papers and plastic film influencing ethyl ester transfer Original Research Article

748

Properties of tree convex constraints Original Research Article

749

Properties of trehalase from different organs of alfalfa, Medicago sativa

750

Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions

751

Properties of triglycine sulfate/poly(vinylidene fluoride-trifluoroethylene) 0-3 composites

752

Properties of triple helix formation with oligodeoxyribonucleotides containing 8-oxo-2′-deoxyadenosine and 2′-modified nucleoside derivatives Original Research Article

753

Properties of Trust: An Analytical View,

754

Properties of tryptophan indole-lyase from a piezophilic bacterium, Photobacterium profundum SS9

755

Properties of Tung oil biodiesel and its blends with 0# diesel

756

Properties of tungsten coating deposited onto copper by high-speed atmospheric plasma spraying

757

Properties of tungsten coatings deposited onto fine grain graphite by different methods

758

Properties of tungsten-doped Bi4Ti3O12-SrBi4Ti4O15 intergrowth ferroelectrics

759

Properties of two human atrial cell models in tissue: Restitution, memory, propagation, and reentry

760

PROPERTIES OF TWO MONOCLONAL ANTIBODIES SPECIFIC TO THE CHERRY STRAIN OF PLUM POX VIRUS

761

Properties of two tropical soils in relation to the transport of radionuclides in the rhizosphere

762

Properties of two-dimensional sets with small sumset

763

Properties of two-photon absorption-induced cavity lasing of an organic dye HEASPI pumped by picosecond infrared laser beam

764

Properties of ultrafast laser textured silicon for photovoltaics

765

Properties of ultrafine-grained steel by repeated shear deformation of side extrusion process

766

Properties of ultrafine-grained steel by repeated shear deformation of side extrusion process

767

Properties of ultrafine-grained steel by repeated shear deformation of side extrusion process

768

Properties of ultrasound extracted bicomponent lignocellulose thin films

769

Properties of ultrasound extracted bicomponent lignocellulose thin films

770

Properties of ultrasound-assisted blends of poly(ethylene terephthalate) with polycarbonate

771

Properties of ultrathin films appropriate for optics capping layers exposed to high energy photon irradiation

772

Properties of ultrathin Pb layers on the Ni3Al(1 1 1) face

773

Properties of Ultraviolet Irradiated Protein Films

774

Properties of uncharged water-soluble tetra(ω-methoxypolyethyleneoxy)phthalocyanine free base: Viable switching of the optical response by means of H3O+ ions

775

Properties of undoped n-type ZnO film and N–In codoped p-type ZnO film deposited by ultrasonic spray pyrolysis

776

Properties of unidirectional GFRPs based on an epoxy resin modified with polysulphone or an epoxyurethane oligomer

777

Properties of uniformly hard languages

778

Properties of unirradiated and irradiated Ti–6Al–4V alloy for ITER flexible connectors

779

Properties of Urbic Anthrosols from an abandoned shunting yard in the Ruhr area, Germany

780

Properties of utility function for Barles and Soner model

781

Properties of vacancies and self-interstitials in silicon deduced from crystal growth, wafer processing, self-diffusion and metal diffusion

782

Properties of vacuum sintered duplex stainless steels

783

Properties of vacuum-deposited Li films and impact on plasma performance in TJ-II

784

Properties of vacuum-evaporated bismuth absorber

785

Properties of vacuum-evaporated bismuth absorber

786

Properties of valuable new intermetallics: Brewer–Engel model applied to the bonding of transition metal dialuminides

787

Properties of value function and existence of viscosity solution of HJB equation for stochastic boundary control problems

788

Properties of vanadium-doped SrBi4Ti4O15 ferroelectric ceramics

789

Properties of vanadium-doped SrBi4Ti4O15 ferroelectric ceramics

790

Properties of vapor-deposited Au:Er films for metallic magnetic calorimeters

791

Properties of vapor-deposited Au:Er films for metallic magnetic calorimeters

792

Properties of Variant Forms of Human Stem Cell Factor Recombinantly Expressed in Escherichia coli

793

Properties of various carbon nanomaterial surfaces in bilirubin adsorption

794

Properties of various large-scale fabricated TiAlN- and CrN-based superlattice coatings grown by combined cathodic arc–unbalanced magnetron sputter deposition

795

Properties of various plants and animals feedstocks for biodiesel production

796

Properties of various size fractions of crushed concrete related to process conditions and re-use

797

Properties of vertex cover obstructions Original Research Article

798

Properties of vitreous barium zinc mixed metaphosphate

799

Properties of volcanic pumice based cement and lightweight concrete

800

Properties of volume–capacity ratio in congested complex networks

801

Properties of vortices in Bose–Einstein condensates

802

Properties of vulcanized rubber nanocomposites filled with nanokaolin and precipitated silica

803

Properties of V4Cr4Ti for application as fusion reactor structural components

804

Properties of water-in-oil (W/O) nano-emulsions prepared by a low-energy emulsification method

805

Properties of water-soluble and insoluble particulate matter emitted from dewatered sewage sludge incineration in a pilot-scale ash melting furnace

806

Properties of wave propagations induced by temporal noise in a subexcitable medium

807

Properties of WCAg and WCCu for vacuum contactors

808

Properties of WC–FeCrAl coatings manufactured by different high velocity thermal spray processes

809

Properties of weakly collapsing solutions to the nonlinear Schrödinger equation

810

Properties of wealth distribution in multi-agent systems of a complex network

811

Properties of Weir and Cockerham’s estimators and associated bootstrap confidence intervals

812

Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition

813

Properties of wheat starch film-forming dispersions and films as affected by chitosan addition Original Research Article

814

Properties of wheel/rail longitudinal creep force due to sinusoidal short pitch corrugation on railway rails

815

Properties of whey and egg white protein foams

816

Properties of whey protein–maltodextrin conjugates as impacted by powder acidity during the Maillard reaction

817

Properties of wood esterified by fatty-acid chlorides

818

Properties of wood-based composites formulated with aggregate industry waste

819

Properties of X-, C- and L-band repeat-pass interferometric SAR coherence in Mediterranean pine forests affected by fires

820

Properties of xanthan obtained from agricultural wastes acid hydrolysates Original Research Article

821

Properties of xerogel layers for the detection of toluene in water

822

Properties of X-ray shots of Cyg X-1 in high state

823

Properties of xylanolytic enzyme system in bifidobacteria and their effects on the utilization of xylooligosaccharides

824

Properties of Yb:YAG scintillators

825

Properties of Yb:YAG scintillators

826

Properties of Yb-doped scintillators: YAG, YAP, LuAG

827

Properties of Yb-doped scintillators: YAG, YAP, LuAG

828

Properties of Y-doped BaSnO3 proton conductors

829

Properties of YSZ thin films deposited by e-beam technique

830

Properties of yttrium barium copper oxide (YBCO) containing vanadium

831

Properties of yttrium-doped barium zirconate ceramics synthesized by the oxidant-peroxo method

832

Properties of Y-TZP/Al2O3 ceramic nanocomposites obtained by high-energy ball milling

833

Properties of zeolite Y in various forms and utilization as catalysts or supports for cerium oxide in ethanol oxidation

834

Properties of zeolitic tuff (clinoptilolite) blended portland cement

835

Properties of zeros of discretised system using multirate input and hold

836

Properties of zirconia thin layers elaborated by high voltage anodisation in view of SOFC application

837

Properties of Zn3N2-doped ZnO films deposited by pulsed laser deposition

838

Properties of ZnO in dependence on method of preparation and size distribution in coatings Original Research Article

839

Properties of ZnO thin films grown on Si substrates by photo-assisted MOCVD

840

Properties of ZnO thin films grown on Si substrates in vacuum and oxygen ambient by pulsed laser deposition

841

Properties of ZnO thin films prepared by radio-frequency plasma beam assisted laser ablation

842

Properties of ZnO thin films prepared by reactive evaporation

843

Properties of ZnO varistor blocks under multiple lightning impulse voltages

844

Properties of ZnO varistor blocks under multiple lightning impulse voltages

845

Properties of Zr-based bulk metallic glass under shock compression

846

Properties of Zr–Si–N coatings prepared by RF reactive sputtering

847

Properties of Zr–ZrC–ZrC/DLC gradient films on TiNi alloy by the PIIID technique combined with PECVD

848

Properties of α-Hydroxynitrile Lyase from the Petiole of Cassava (Manihot esculentaCrantz)

849

Properties of β*-Homeomorphisms in Topological Spaces

850

Properties of β-Ca3(PO4)2 bioceramics prepared using nano-size powders

851

Properties of β-carotene and retinoic acid in mixed monolayers with dipalmitoylphosphatidylcholine (DPPC) and Solutol

852

Properties On Finsler Σ-Spaces

853

Properties prediction of ultra high performance concrete using blended cement hydration model

854

Properties related phase evolution in porcelain ceramics

855

Properties related to first countability and countable compactness in hyperspaces: a new approach

856

Properties study of cotton stalk fiber/gypsum composite

857

Properties study of inductively coupled nitrogen plasmas and pressure effects on them

858

Properties variation of Bi-2212 directionally solidified induced by 0.4Pb substitution

859

Properties, characterization, and decay of sticky rice–lime mortars from the Wugang Ming dynasty city wall (China)

860

Properties, classification and agricultural potential of basaltic soils in semi-arid Nigeria

861

Properties, crystallization mechanism and microstructure of lithium disilicate glass–ceramic

862

Properties, degradation and high temperature fuel cell test of different types of PBI and PBI blend membranes

863

Properties, formation, and geo-ecological significance of organic soils in the coastal region of East Antarctica (Wilkes Land)

864

Properties, isomorphisms and enumeration of 2-Quasi-Magic Sudoku grids

865

Properties, main applications and perspectives of worm micelles

866

Properties, performance and current status of the laminated electrochromic glass of Gesimat

867

Properties, processes and ecological functions of floodplain, peatland, and paddy soils

868

Properties, Processing and Applications of Glass and Rare Earth-doped Glasses for Optical Fibres: Dan Hewak (Ed.); Inspec., Institution of Electrical Engineers, London, December 1998, 376 pp. ISBN 0-85296-952-X, £125.00

869

Properties, processing and applications of indium phosphide

870

Properties, processing and applications of indium phosphide, EMIS Datareviews Series No. 21,: T.P. Pearsal, INSPEC IEE, London, UK. ISBN 0 85296 949 X

871

Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: A state-of-the-art review

872

Properties, use and health effects of depleted uranium (DU): a general overview

873

Properties-Based Retrieval and User Decision States: User Control and Behavior Modeling

874

Properties–performance of thin film composites membrane: study on trimesoyl chloride content and polymerization time

875

Proper-time resolution function for measurement of time evolution of B mesons at the KEK B-Factory

876

Proper-time resolution function for measurement of time evolution of B mesons at the KEK B-Factory

877

Proper-time resolution function in – mixing search at Belle

878

Proper-time resolution function in – mixing search at Belle

879

Property (b) and property (w) for operator matrices

880

Property (gb) and perturbations

881

Property (H) in Köthe-Bochner spaces

882

Property (H) in Köthe-Bochner spaces

883

PROPERTY (m) FOR BOUNDED LINEAR OPERATORS

884

Property (T ) and strong property (T ) for unital C∗-algebras

885

Property (T ) for non-unital C ∗-algebras ✩

886

Property (T) for C* dynamical systems

887

Property (w) and perturbations ✩

888

Property (w) and perturbations II

889

Property (w) and perturbations III

890

Property (w) for perturbations of polaroid operators Original Research Article

891

Property A and affine buildings

892

Property A and CAT(0) cube complexes

893

Property A for groups acting on metric spaces

894

Property analysis and humidity sensitivity of the composite material of BaTiO3 and RMX

895

Property analysis of triglyceride-based thermosets

896

PROPERTY ANALYSIS OF TRIPLE IMPLICATION METHOD FOR APPROXIMATE REASONING ON ATANASSOVS INTUITIONISTIC FUZZY SETS

897

Property and application of novel ferrocenyl–azobenzene labeled peptide nucleic acid monomers with the dual stimulus–response characteristics

898

PROPERTY AND JUSTICE

899

Property and microstructure evaluation as a function of processing parameters: Large HY-80 steel casting for a US Navy submarine

900

Property and performance requirements for thermotropic layers to prevent overheating in an all polymeric flat-plate collector

901

Property and prices, toward a unified theory of value : André Burgstaller, (Cambridge University Press, Cambridge MA, 1994) pp. xi + 242, $49.95

902

Property and quantum chemical investigation of poly(ethyl a-cyanoacrylate)

903

PROPERTY AND RIGHTS

904

Property and the pursuit of knowledge: IPR issues affecting scientific research

905

Property and thermal stability of in situ composite Cu–Cr alloy contact cable

906

Property and Weyl type theorem

907

Property assessment of steel–fibre reinforced concrete made with silica fume

908

Property Attribution in Metaphor Comprehension

909

Property C with Constraints and Inverse Spectral Problems with Incomplete Data

910

Property change mechanism in tungsten under neutron irradiation in various reactors

911

Property change of a LaNi0.6Fe0.4O3 cathode in the initial current loading process and the influence of a ceria interlayer

912

Property changes of 12Cr1MoV with 10CrMo910 main steam piping after long-term high-temperature service

913

Property changes of urinary nanocrystallites and urine of uric acid stone formers after taking potassium citrate

914

Property characterizations of Cu2ZnSnSe4 and Cu2ZnSn(S,Se)4 films prepared by sputtering with single Cu–Zn–Sn target and a subsequent selenization or sulfo-selenization procedure

915

Property content guides children’s memory for social learning episodes

916

Property control of carbon materials by fluorination Original Research Article

917

Property control of enzyme coatings on polymer nanofibers by varying the conjugation site concentration

918

Property control of microwave dielectric materials using self-flux compositions

919

Property control of new forms of carbon materials by fluorination

920

Property crime distribution and equal police deployment—an empirical study of Taiwan

921

Property Degradation of Tetragonal Zirconia Induced by Low-Temperature Defect Reaction with Water Molecules

922

Property Discontinuities in the Solution of Finite Difference Approximations to the Neutron Diffusion Equations

923

Property distributions and transient-tracer ages in Levantine Intermediate Water in the Eastern Mediterranean

924

Property Division of Unmarried Cohabitants in Malaysia

925

Property division on divorce with inequity aversion

926

Property enhancement of transparent conducting zinc oxide thin films—Effect of simultaneous (Sn+F) doping Original Research Article

927

Property enhancements via matrix microstructure modification of carbon–carbon composites prepared by CVI processing

928

Property Estimation with Automated Ball Indentation Using Artificial Neural Network and Finite Element Simulation

929

Property evaluation and biodiversity conservation: Decision support for making hard choices

930

Property evaluation and control in a semibatch MMA/MA solution copolymerization reactor

931

Property evaluation in The Expert System for Thermodynamics (“TEST”) web application

932

Property evaluation in The Expert System for Thermodynamics (“TEST”) web application

933

Property evaluation of a new selective water shutoff agent for horizontal well

934

Property evaluation of magnesium phosphate cement mortar as patch repair material

935

Property evaluations of dry-cast reconstituted bacterial cellulose/tamarind xyloglucan biocomposites

936

Property evolution during vitrification of dimethacrylate photopolymer networks

937

Property extrema in GeAs sulphide glasses

938

Property fields in a Tortugas Eddy in the southern straits of Florida

939

Property fields in an effluent plume of the Mississippi river

940

Property improvement of 0.3Pb(Zn1/3Nb2/3)O3-0.7Pb0.96La0.04(ZrxTi1−x)0.99O3 ceramics by hot-pressing

941

Property improvement of Cu–Zr alloy films with ruthenium addition for Cu metallization Original Research Article

942

Property improvement of Portland cement by incorporating with metakaolin and slag

943

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

944

Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content Original Research Article

945

PROPERTY IN LAND, LOCAL POLITICS, AND THE STATE

946

Property Inheritance Management: Issues Unclaimed Property

947

Property insurance loss distributions

948

Property investigation of calcium–silicate–hydrate (C–S–H) gel in cementitious composites

949

Property lattices for independent quantum systems

950

Property law: itʹs physical—and logical

951

Property maps for abrasion resistance of materials Original Research Article

952

Property modeling across transition temperatures in polymers: a robust stiffness–temperature model

953

Property models and theoretical analysis of novel solid oxide fuel cell with triplet nano-composite electrode

954

Property Modification Factors for Seismically Isolated Bridges

955

Property of a highly active bimetallic catalyst based on a supported manganese oxide for the complete oxidation of toluene

956

Property of carbon nanotube tip for surface topography characterization

957

Property of diblock copolymer having extremely narrow molecular weight distribution

958

Property of intramolecular charge transfer compounds Dδ+-π-Aδ– derived from TCNQ derivatives

959

Property of Kelley for confluent retractable continua

960

Property of magneto-driven poly (N-isopropylacrylamide) gel containing γ-Fe2O3 in NaCl solution as a chemomechanical device

961

Property of period-doubling bifurcation cascades of discrete dynamical systems

962

Property of period-doubling bifurcations

963

Property of positive solutions and its applications for Sturm–Liouville singular boundary value problems Original Research Article

964

Property of the M-DNA probed by a minor groove binding dye 4′,6-diamidino-2-phenylindole Original Research Article

965

Property of upgraded solid product from low rank coal by thermal reaction with solvent

966

Property optimization of Ba0.4Sr0.6TiO3–BaMoO4 composite ceramics for tunable microwave applications

967

Property optimization of BST-based composite glass ceramics for energy-storage applications

968

Property optimization of nanostructured ARB-processed Al by post-process deformation

969

Property optimization through microstructural control in titanium and aluminum alloys

970

Property optimization through microstructural control in titanium and aluminum alloys

971

Property P for knots admitting certain Gabai disks

972

PROPERTY P IN MODULAR METRIC SPACES

973

Property peculiarities of the atelocollagen–hyaluronan conjugates crosslinked with a short chain di-oxirane compound

974

Property persistence in the situation calculus Original Research Article

975

Property Prediction Using Hierarchical Regression Model Based on Calibration Original Research Article

976

Property predictions using microstructural modeling

977

Property predictions using microstructural modeling Original Research Article

978

Property prices and bank lending in China

979

Property Prices and Urban Forest Amenities

980

Property prices in urban areas affected by road traffic noise Review Article

981

Property reinforcement of poly(propylene carbonate) by simultaneous incorporation of poly(lactic acid) and multiwalled carbon nanotubes

982

Property rights and deforestation in the Brazilian Amazon

983

Property rights and ecosystem properties

984

Property Rights and Entrepreneurial Income in Commercial Fisheries

985

Property rights and grassland degradation: A study of the Xilingol Pasture, Inner Mongolia, China

986

Property rights and landscape planning in the intermountain west: The Teton Valley case

987

Property rights and liability for deforestation under REDD+: Implications for ‘permanence’ in policy design

988

Property rights and multipurpose mountain forest management

989

Property rights and natural resource damage assessments

990

Property rights and participatory biodiversity conservation: lessons from Malekula Island, Vanuatu

991

Property rights and sustainable nature tourism: adaptation and mal-adaptation in Dalarna (Sweden) and Maine (USA)

992

Property Rights and the Nature of Chinese Collective Enterprises

993

Property rights and the political organization of agriculture

994

Property rights and the utilisation of wetlands

995

Property rights as policy tools for sustainable development

996

Property rights in a fishery: regulatory change and firm performance

997

Property rights in Chinaʹs economic reforms

998

Property rights in fishing: from state property towards private property?: A case study of three EU countries

999

Property Rights in Genetic Information

1000

Property rights in state legislatures: rural-urban differences in support for state anti-takings bills

بازگشت