<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Influence of growth conditions on the growth mode and layer structure in MBE-growth of SiC on SiC(0001)
2
Influence of growth conditions on the structural perfection of β-SiC epitaxial layers fabricated on 6H-SiC substrates by vacuum sublimation
3
Influence of growth conditions on the structural perfection of β-SiC epitaxial layers fabricated on 6H-SiC substrates by vacuum sublimation
4
Influence of growth curve phase on electricity performance of microbial fuel cell by Escherichia coli
5
Influence of growth form on the accumulation of airborne copper by lichens
6
Influence of growth history on sloughing and erosion from biofilms
7
Influence of growth hormone on the mandibular condylar cartilage of rats
8
Influence of growth kinetics and chemical composition on the shape of voids in quasi-crystals
9
Influence of growth parameters on texture of ZnO nanorods by using electrochemical deposition at low temperatures
10
Influence of growth parameters on the properties of InGaN/GaN multiple quantum well grown by metalorganic chemical vapor deposition
11
Influence of growth parameters on the properties of InGaN/GaN multiple quantum well grown by metalorganic chemical vapor deposition
12
Influence of growth phase on harvesting of Chlorella zofingiensis by dissolved air flotation
13
Influence of growth phase on the essential oil composition of Hyptis suaveolens
14
Influence of growth pressure on the electrical properties of boron-doped polycrystalline diamond films
15
Influence of growth regulators on direct embryo formation from leaf explants of Phalaenopsis orchids
16
Influence of growth stage at harvest on fermentative characteristics of Panicum maximum silage
17
Influence of growth stage on essential oil content and major chemical constituents of Artemisia pallens Bess
18
Influence of Growth Stage on Fusarium Head Blight and Deoxynivalenol Production in Wheat
19
Influence of growth temperature and deposition duration on the structure, surface morphology and optical properties of InN/YSZ (1 0 0)
20
Influence of growth temperature and measuring temperature on isoprene emission, diffusive limitations of photosynthesis and respiration in hybrid poplars
21
Influence of growth temperature and post-annealing on an n-ZnO/p-GaN heterojunction diode
22
Influence of growth temperature and starvation state on survival and DNA damage induction in the marine bacterium Sphingopyxis alaskensis exposed to UV radiation
23
Influence of growth temperature of TiO2 buffer on structure and PL properties of ZnO films
24
Influence of growth temperature on carrier recombination in GaInNAs-based lasers
25
Influence of growth temperature on the microcrystallinity and native defect structure of hydrogenated amorphous silicon
26
Influence of growth temperature on the structure and thermodynamic parameters of barley starches
27
Influence of growth time on field emission properties from carbon nanotubes deposited on arrayed nanoporous silicon pillars
28
Influence of growth-promoting bacteria on the growth of wheat in different soils and temperatures
29
Influence of growth-promoting bacteria on the growth of wheat in different soils and temperatures
30
Influence of guar gum on granule morphologies and rheological properties of maize starch
31
Influence of Guar Gum on Texture Profile Analysis and Stress Relaxation Characteristics of Carrot Sponge Cake
32
Influence of Guava Ripening on Parasitism of the Oriental Fruit-Fly, Bactrocera dorsalis (Hendel) (Diptera: Tephritidae), by Diachasmimorpha longicaudata (Ashmead) (Hymenoptera: Braconidae) and Other Parasitoids
33
Influence of guests and protonation on the conformation of N,N′-dipyridyl-bis-aza-18-crown-6
34
Influence of Guided Inquiry-Based Outdoor Learning on the Concept Mastery of Thematic Learning by Fourth-Grade Students at Primary School
35
Influence of guidewire and catheter type on the frequency of cerebral microembolic signals during left heart catheterization
36
Influence of Guiding Catheter Selection on the Measurement of Coronary Flow Reserve
37
Influence of gut muscle protein extracts from HSD patients on postnatal rat myenteric plexus in vitro
38
Influence of Gypsification on Engineering Behavior of Expansive Clay
39
Influence of gypsum additive on the gyrolite formation process
40
Influence of gyromagnetic term and temperature on switching time of a single-domain particle
41
Influence of H+ ion irradiation on the surface and microstructural changes of a nuclear graphite
42
Influence of H13 steel unit on wear behavior of vermicular cast iron
43
Influence of H2 on the response of lean premixed CH4 flames to high strained flows
44
Influence of H2, CO and CO2 co-feeding on the catalytic activity of Rh/Ti–SiO2 during the partial oxidation of methane
45
Influence of H2/H2O pre-treatment and H2 pressure on the reduction behaviour of Fe/ZrO2 and Fe/K/ZrO2 Fischer–Tropsch catalysts Original Research Article
46
Influence of H2/NH3 mixtures on the composition of SiCNYO and SiCNAl(O) nanopowders
47
Influence of H2/O2 redox treatments at different temperatures on Pd-CeO2 catalyst: Structure and oxygen storage capacity
48
Influence of H2O and CO2 on the selective CO oxidation in H2-rich gases over Au/α-Fe2O3
49
Influence of H2S concentration on the properties of Cu2ZnSnS4 thin films and solar cells prepared by sol–gel sulfurization
50
Influence of H2S on the hydrogenation activity of relevant transition metal sulfides
51
Influence of H2SO4 concentration on lead-acid battery performance: H-type and P-type batteries
52
Influence of H2SO4 concentration on the mechanism of the processes and on the electrochemical activity of the Pb/PbO2/PbSO4 electrode
53
Influence of H2SO4 concentration on the performance of lead-acid battery negative plates
54
Influence of H4SiW12O40 loading on hydrocracking activity of non-sulfide Ni–H4SiW12O40/SiO2 catalysts
55
Influence of habitat and seasonal variation on wild mammal diversity and distribution with special reference to the Trypanosoma brucei gambiense host-reservoir in Bipindi (Cameroon)
56
Influence of habitat fragmentation on the genetic structure of Polyommatus coridon (Lepidoptera: Lycaenidae): implications for conservation Original Research Article
57
Influence of habitat structure and mouth dynamics on avifauna of intermittently-open estuaries: A study of four small South African estuaries
58
Influence of habitat structure and nature of substratum on limpet recruitment: Conservation implications for endangered species
59
Influence of habitat structure on fish assemblage of an artificial reef in southern Brazil
60
Influence of habitat type and surrounding landscape on spider diversity in Swedish agroecosystems
61
Influence of haematocrit level on the kinetics of blood spreading on thin porous medium during dried blood spot sampling
62
Influence of haemodialysis on high-sensitivity C-reactive protein, lipoprotein(a), apolipoproteins A and B
63
Influence of hafnium carbide on vacuum plasma spray processed tantalum carbide microstructures
64
Influence of Hairiness ofGerbera jamesoniiLeaves on the Searching Efficiency of the ParasitoidEncarsia formosa
65
Influence of halide anions on the construction of coordination complexes with mercury(II) center: Syntheses, structures and photoluminescent properties
66
Influence of halide flux on the crystallinity, microstructure and thermoluminescence properties of CdSiO3:Co2+ nanophosphor
67
Influence of halide ions on the inhibitive effect of congo red dye on the corrosion of mild steel in sulphuric acid solution
68
Influence of HALO and drain-extension doping gradients on transistor performance
69
Influence of halogen irradiance on short- and long-term wear resistance of resin-based composite materials
70
Influence of halophytes and metal contamination on salt marsh macro-benthic communities
71
Influence of hamstring lengthening on muscle activation timing
72
Influence of hand forces and handle size on power absorption of the human hand–arm exposed to zh-axis vibration
73
Influence of hand grenade weight, shape and diameter on performance and subjective handling properties in relations to ergonomic design considerations
74
Influence of handedness and bilateral eye movements on creativity
75
Influence of handling and processing of rough rice on fissures and head rice yields Original Research Article
76
Influence of handling and storage conditions on morphological and mechanical properties of polymer-coated particles: characterization and modeling
77
INFLUENCE OF HANDLING PROCESSES FOR BROILERS ON MORTALITY AND CARCASS QUALITY AT SLAUGHTERHOUSE
78
Influence of hard particle addition and chemical interdiffusion on the properties of hot extruded tool steel compounds
79
Influence of hard segment content and nature on polyurethane/multiwalled carbon nanotube composites
80
Influence of hardening behaviour of elastoplastic materials on the determination of elastic modulus using indentation tests
81
Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens
82
Influence of hardening type on self-heating of metallic materials under cyclic loadings at low amplitude
83
Influence of hardness and roughness on the tribological performance of TiC/a-C nanocomposite coatings
84
Influence of hardness of substrates on properties of surface layer formed by fine particle bombarding
85
Influence of hardness of the harder body on wear regime transition in a sliding pair of steels
86
Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing
87
Influence of hardpan layers on arsenic mobility in historical gold mine tailings
88
Influence of harmonically varying normal load on steady-state behavior of a 2dof torsional system with dry friction
89
Influence of harvest date and geographical location on kernel symptoms, fungal infestation and embryo viability of malting barley
90
Influence of harvest date on glycoalkaloid contents of three potato varieties
91
Influence of harvest date on nitrate contents of three potato varieties for off-season production
92
Influence of harvest date on nitrate contents of three potato varieties for off-season production
93
Influence of harvest maturity and fruit logistics on pineapple (Ananas comosus [L.] Merr.) volatiles assessed by headspace solid phase microextraction and gas chromatography–mass spectrometry (HS-SPME-GC/MS)
94
Influence of harvest time and soil type on fuel quality in reed canary grass (Phalaris arundinacea L.)
95
Influence of harvest time on fuel characteristics of five potential energy crops in northern China
96
Influence of harvest year, cultivar and geographical origin on Greek extra virgin olive oils composition: A study by NMR spectroscopy and biometric analysis
97
INFLUENCE OF HARVESTER TYPE AND HARVESTING TIME ON QUALITY OF HARVESTED CHAMOMILE
98
Influence of harvesting intensity on the floristic composition of natural Mediterranean maritime pine forest
99
Influence of HCl corrosion on the mechanical properties of concrete
100
Influence of HCl on CO and NO emissions in combustion
101
Influence of HCl on oxidation of gaseous elemental mercury by dielectric barrier discharge process Original Research Article
102
Influence of HCl on the Homogeneous Reactions of CO and NO in Postcombustion Conditions—A Kinetic Modeling Study
103
Influence of HCl/HF treatment on organic matter in aquifer sediments: A Rock-Eval pyrolysis study
104
Influence of He implanted surface layer on the mechanical properties of Fe-3%Si alloy
105
Influence of He implanted surface layer on the mechanical properties of Fe-3%Si alloy
106
Influence of He/O2 atmospheric pressure plasma jet treatment on subsequent wet desizing of polyacrylate on PET fabrics
107
Influence of head constraint and muscle forces on the strain distribution within the intact femur
108
Influence of head constraint and muscle forces on the strain distribution within the intact femur
109
Influence of head flexion on intraocular pressure, cardiovascular, and respiratory responses in patients undergoing cataract surgery after endotracheal intubation
110
Influence of Head Geometry on the Distributive Performance of Air-assisted Seed Drills
111
Influence of head orientation on visually and memory-guided arm movements
112
Influence of Head Position on the CBCT Accuracy in Assessment of the Proximity of the Root Apices to the Inferior Alveolar Canal
113
Influence of head tissue conductivity in forward and inverse magnetoencephalographic Simulations using realistic head models
114
Influence of headspace composition on product diversity by sulphate reducing bacteria biocathode
115
Influence of health and taste attitudes on consumption of low- and high-fat foods
116
Influence of Health Care, Cost, and Culture on Breast Cancer Screening: Issues Facing Urban American Indian Women
117
Influence of Health Education on Prevention of Drug Abuse
118
Influence of heart rate on stroke volume variability in atrial fibrillation in patients with normal and impaired left ventricular function
119
Influence of heart rate on the detectability and reproducibility of multislice computed tomography for measuring coronary calcium score using a pulsating calcified mock-vessel in comparison with electron beam tomography
120
Influence of Heart Rate on the Diagnostic Accuracy of Dual-Source Computed Tomography Coronary Angiography Original Research Article
121
Influence of heart rate on vessel visibility in noninvasive coronary angiography using new multislice computed tomography: Experience in 94 patients
122
Influence of Heat and Mass Transfer on Free Convection of Micropolar Fluid between Vertical Concentric Cylinders
123
Influence of heat and mass transfer on peristaltic flow of a third order fluid in a diverging tube
124
Influence of heat and pressure treatment on the rheological behavior of petroleum pitches
125
Influence of heat and thermochemical treatment on abrasion resistance of structural and tool steels
126
Influence of heat conduction in the wall on nucleate boiling heat transfer
127
Influence of heat curing on the pore structure and compressive strength of self-compacting concrete (SCC)
128
Influence of heat exposure time on isothermal degradation of plasma sprayed CoNiCrAlY coatings
129
Influence of heat from light curing units and dental composite polymerization on cells in vitro
130
Influence of heat gains on heat recovery in a two-zone-industrial building with several available hot refuse flows
131
Influence of heat generation on the phase transformations and impact responses of composite plates with embedded SMA wires
132
Influence of Heat Input in Pulsed Current GTAW Process on Microstructure and Corrosion Resistance of Duplex Stainless Steel Welds Original Research Article
133
Influence of heat input on high temperature weldment corrosion in submerged arc welded power plant carbon steel
134
Influence of heat input on post weld microstructure and mechanical properties of friction stir welded HSLA-65 steel
135
Influence of heat input on the tensile properties of austenitic-ferritic welded joints
136
Influence of heat input waveform on transient critical heat flux of subcooled water flow boiling in a short vertical tube Original Research Article
137
Influence of Heat Input, Working Fluid and Evacuation Level on the Performance of Pulsating Heat Pipe
138
Influence of Heat Input, Working Fluid and Evacuation Level on the Performance of Pulsating Heat Pipe
139
Influence of heat loss on the performance of an air-standard Atkinson cycle
140
Influence of Heat Loss on the Second-Law Efficiency of an Otto Cycle
141
Influence of heat losses on nonlinear fingering dynamics of exothermic autocatalytic fronts
142
Influence of heat processing and calcium ions on the ability of EDTA to inhibit lipid oxidation in oil-in-water emulsions containing omega-3 fatty acids
143
Influence of heat processing on functional properties of Australian wattle seed (Acacia victoriae Bentham) extracts
144
Influence of heat processing on the bioaccessibility of zinc and iron from cereals and pulses consumed in India
145
Influence of heat release and turbulence on scalar dissipation rate in autoigniting n-heptane/air mixtures
146
Influence of Heat Shock Temperatures and Fast Freezing on Viability of Probiotic Sporeformers and the Issue of Spore Plate Count Versus True Numbers
147
Influence of heat source/sink on a Maxwell fluid over a stretching surface with convective boundary condition in the presence of nanoparticles
148
Influence of Heat Stress on Development of Chick Embryo (in ovo)
149
Influence of heat transfer on a peristaltic flow of Johnson Segalman fluid in a non uniform tube
150
Influence of heat transfer on a peristaltic transport of Herschel–Bulkley fluid in a non-uniform inclined tube
151
Influence of heat transfer on MHD flow in a pipe with expanding or contracting permeable wall
152
Influence of heat transfer on peristaltic transport of a Johnson–Segalman fluid in an inclined asymmetric channel
153
Influence of heat transfer on the aerodynamic performance of a plunging and pitching NACA0012 airfoil at low Reynolds numbers
154
Influence of heat transfer on the dynamic response of a spherical gas/vapour bubble
155
Influence of heat transfer types on residual stress distribution of a welded plate using finite element
156
Influence of heat treated adjunct culture on the quality of edam cheese made from reconstituted whole milk powder
157
Influence of heat treatment and gamma-rays irradiation on the structural and optical characterizations of nano-crystalline cobalt phthalocyanine thin films
158
Influence of heat treatment conditions on release of chlorine from Datong coal
159
Influence of heat treatment conditions on the structure and magnetic properties of barium ferrite BaFe12O19 hollow microspheres of low density
160
Influence of Heat Treatment in Sintering Process on Characteristics of Al2o3-Zro2 Ceramics Systems
161
Influence of heat treatment on anisotropic creep behavior of aluminide coating on a Ni-base single crystal superalloy
162
Influence of heat treatment on cobalt ferrite ceramic powders
163
Influence of heat treatment on creep of a Mn–N stabilised austenitic stainless steel
164
Influence of heat treatment on crystallization and corrosion behavior of calcium phosphate glass coated AZ31 magnesium alloy by sol–gel method
165
Influence of heat treatment on crystallization of bioactive glasses
166
Influence of heat treatment on degradation behavior of bio-degradable die-cast AZ63 magnesium alloy in simulated body fluid
167
Influence of heat treatment on degradation behavior of bio-degradable die-cast AZ63 magnesium alloy in simulated body fluid
168
Influence of heat treatment on fatigue behaviour of high-strength Mg–10Gd–3Y alloy
169
Influence of heat treatment on field emission characteristics of boron nitride thin films
170
Influence of heat treatment on field emissive properties of single-walled carbon nanotubes
171
Influence of heat treatment on hydrogen ingress into V–4Cr–4Ti alloy
172
Influence of Heat Treatment on Magnetic Properties of Non-Oriented Electrical Steel Prepared by CSP Process Simulated Original Research Article
173
Influence of heat treatment on magnetostrictions of Finemet Fe73.5CU1Nb3Si3.5B9
174
Influence of heat treatment on magnetostrictions of Finemet Fe73.5CU1Nb3Si3.5B9
175
Influence of heat treatment on microstructure and adhesion of Al2O3 fiber-reinforced electroless Ni–P coating on Al–Si casting alloy
176
Influence of heat treatment on microstructure and creep properties of hot continuous rolled Ti-6Al-4V alloy
177
Influence of heat treatment on microstructure and hot crack susceptibility of laser-drilled turbine blades made from René 80
178
Influence of heat treatment on microstructure and mechanical properties of CVI-CFC composites with medium and highly textured pyrocarbon matrices
179
Influence of heat treatment on microstructure and mechanical properties of iron-based coating
180
Influence of heat treatment on microstructure and properties of highly textured pyrocarbons deposited during CVD at about 1100 °C and above 2000 °C
181
Influence of heat treatment on microstructure and tensile property of a new high strength beta alloy Ti–2Al–9.2Mo–2Fe
182
Influence of Heat Treatment on Microstructures and Properties of Nd8Fe78B6Co4 Alloy
183
Influence of heat treatment on physical–chemical properties of PAN-based carbon fiber
184
Influence of heat treatment on resistance to electrochemical corrosion of the strain-hardened strips made of the Ni3Al phase based alloys
185
Influence of heat treatment on slurry erosive wear resistance of Al6061 alloy
186
Influence of heat treatment on spectroscopic properties of Er3+ in multicomponent ZrF4–ZnF2–AlF3–YF3–MF2 (M = Ca, Sr, Ba) based glass
187
Influence of heat treatment on structural, electrical, impedance and optical properties of nanocrystalline ITO films grown on glass at room temperature prepared by electron beam evaporation
188
Influence of heat treatment on synthesis of stoichiometric perovskite PbTiO3 nanostructure via hydrothermal method
189
Influence of Heat Treatment on the AA6061 and AA6063 Aluminum Alloys Behavior at Elevated Deformation Temperature
190
Influence of heat treatment on the antioxidant activities and polyphenolic compounds of Shiitake (Lentinus edodes) mushroom
191
Influence of heat treatment on the behavior of clayey soils
192
Influence of heat treatment on the coefficient of thermal expansion of Al (6061) based hybrid composites
193
Influence of heat treatment on the colour of Au and Ag glasses produced by the sol–gel pathway
194
Influence of heat treatment on the cyclic deformation properties of aluminium alloy AA7030
195
Influence of heat treatment on the fatigue life of a laser-welded NiTi alloy wire
196
Influence of heat treatment on the internal friction of 2D-C/SiC composites
197
Influence of heat treatment on the micro/nano-tribological properties of ultra-thin ionic liquid films on silicon
198
Influence of heat treatment on the microstructure and mechanical properties of 6005 and 6082 aluminium alloys
199
Influence of heat treatment on the microstructure and performance of high-velocity oxy-fuel sprayed WC–12Co coatings
200
Influence of heat treatment on the microstructure and stress rupture property of DZ951 alloy
201
Influence of heat treatment on the microstructure, texture and formability of 2024 aluminium alloy
202
Influence of heat treatment on the microstructure, ultrasonic attenuation and hardness of SAF 2205 duplex stainless steel
203
Influence of heat treatment on the particle size of nanobrookite TiO2 thin films produced by sol–gel method
204
Influence of heat treatment on tribological properties of electroless Ni–P and Ni–P–Al2O3 coatings on Al–Si casting alloy
205
Influence of heat treatment on tritium distribution in V–4Cr–4Ti alloy
206
Influence of Heat Treatment Parameters on Properties of NdRFeMCoB Sintered Magnets Original Research Article
207
Influence of heat treatment parameters on the lubricated sliding wear behaviour of a zinc-based alloy
208
Influence of Heat Treatment Parameters, Temperature and Time, on Wear and Microhardness of NiCrBSi Flame Sprayed Coatings Applied on CK45 Substrates
209
Influence of heat treatment regimes on microstructure and creep properties of FGH95 nickel base superalloy
210
Influence of Heat Treatment Temperature on Microstructure and Property of 00Crl3Ni5Mo2 Supermartensitic Stainless Steel Original Research Article
211
Influence of heat treatment temperature on the morphological and structural aspects of reticulated vitreous carbon used in polyaniline electrosynthesis
212
Influence of heat treatments and anodization on fatigue life of 2017A alloy
213
Influence of heat treatments on residual tritium amount in tritiated stainless steel waste
214
Influence of heat treatments on the intergranular corrosion resistance of the AISI 347 cast and weld metal for high temperature services
215
Influence of heat treatments on the mechanical properties of high-quality Ni-rich NiTi produced by powder metallurgical methods
216
Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel
217
Influence of heat treatments on the wear behaviour of an AA6092/SiC25p composite
218
Influence of heating and solidification conditions on the structure and surface quality of electron-beam melted Ti–6Al–4V ingots
219
Influence of heating curve on the sintering of alumina subjected to high-energy milling
220
Influence of heating duration on high-voltage charging durability of an activated carbon electrode for electric double layer capacitors
221
Influence of heating on antioxidant activity and the chemical composition of some spice essential oils
222
Influence of heating on electric and magnetic properties of Fe75Ni2B13Si8C2 amorphous alloy
223
Influence of heating on the solid acidity of montmorillonite: A combined study by DRIFT and Hammett indicators
224
Influence of heating on various properties of six Mediterranean soils. A laboratory study
225
Influence of heating rate in α + γ dual phase field on lamellar morphology and creep property of fully lamellar Ti–48Al alloy
226
Influence of heating rate in α + γ dual phase field on lamellar morphology and creep property of fully lamellar Ti–48Al alloy
227
Influence of heating rate on anisothermal recrystallization in low and ultra-low carbon steels
228
Influence of heating rate on anisothermal recrystallization in low and ultra-low carbon steels
229
Influence of heating rate on optical properties of Nd:YAG laser ceramic
230
Influence of heating rate on the crystalline properties of 0.7BiFeO3–0.3PbTiO3 thin films prepared by sol–gel process
231
Influence of heating rate on the pyrolysis of Jordan oil shale
232
Influence of heating source on the efficacy of lignocellulosic pretreatment – A cellulosic ethanol perspective
233
Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis
234
Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis
235
Influence of heating temperature and relative humidity in the evaporation of pinned droplets
236
Influence of heating temperature on the development of volatile compounds in bigeye tuna meat (Thunnus obesus) as assessed by E-nose and SPME-GC/MS
237
Influence of heating time and pressure treatment of potato starch on the generation of radicals: EPR studies
238
Influence of heating, protein and glycerol concentrations of film-forming solution on the film properties of Argentine anchovy (Engraulis anchoita) protein isolate Original Research Article
239
Influence of heat-treatment on CO2 separation performance of novel fixed carrier composite membranes prepared by interfacial polymerization
240
Influence of heat-treatment on lithium ion anode properties of mesoporous carbons with nanosheet-like walls
241
Influence of heat-treatment on magnetic, magnetostrictive and piezomagnetic properties and structure of Fe64Ni10Nb3Cu1Si13B9 metallic glass
242
Influence of heat-treatment on magnetic, magnetostrictive and piezomagnetic properties and structure of Fe64Ni10Nb3Cu1Si13B9 metallic glass
243
Influence of heat-treatment on the selective adsorption of CO2 in a model natural gas over molecular sieve carbons Original Research Article
244
Influence of heat-treatment on the sliding wear of thermal spray cermet coatings
245
Influence of heat-treatment schedule on crystallization and microstructure of bauxite tailing glass–ceramics coated on tiles
246
Influence of heavy metal contaminants at variable pH regimes on rheological behaviour of bentonite
247
Influence of Heavy Metal on Activated Sludge Activity: DO and SOUR Monitoring
248
Influence of heavy metals adsorption on the surface-energy properties of fluorinated montmorillonite clays “Rassoul”
249
Influence of heavy metals in the biomethanation of slaughterhouse waste
250
Influence of Heavy Metals on Methane Oxidation in Tropical Rice Soils
251
Influence of heavy metals on the formation and the distribution behavior of PAH and PCDD/F during simulated fires
252
Influence of heavy metals on the microbial degradation of diesel fuel
253
Influence of heavy organic pollutants of anthropic origin on PAH retention by kaolinite
254
Influence of heavy-metals toxicity on the growth of Phanerochaete chrysosporium
255
Influence of hedgerow and grassy field borders on ground beetle (Coleoptera: Carabidae) activity in fields of corn
256
Influence of Helical CT Parameters on Spatial Resolution in CT Angiography Performed with a Subsecond Scanner
257
Influence of helical tube dimensions on open channel natural convection heat transfer
258
Influence of Helicobacter Pylori Infection on Plasma Ghrelin Level in Patients with Upper GIT Lesions
259
Influence of helio/geophysical phenomena on the solar radiation input to the lower atmosphere Original Research Article
260
Influence of helium cooling channels on magnetohydrodynamic flows in the HCLL blanket
261
Influence of helium dilution of silane on microstructure and opto-electrical properties of hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited by HW-CVD
262
Influence of helium implantation of optical fibre faceplates on acid etching Original Research Article
263
Influence of helium-dielectric barrier discharge treatments on the adhesion properties of polyamide-6 surfaces
264
Influence of helix angle and density variation on the cutting force in wood-based products machining
265
Influence of helix parameters on the reflectance of microwave by chiral composites
266
Influence of heme environment structure on dioxygen affinity for the dual function Amphitrite ornata hemoglobin/dehaloperoxidase. Insights into the evolutional structure–function adaptations
267
Influence of hemicellulose aggregate and gel layer formation on flux and retention during nanofiltration of alkaline solutions Original Research Article
268
Influence of hemicellulosic derivatives on the sulfate kraft pulp strength
269
Influence of hemicellulosic derivatives on the sulfate kraft pulp strength
270
Influence of Hemodialysis on Lipid Peroxidation, Enzymatic and Non-Enzymatic Antioxidant Capacity in Chronic Renal Failure Patients
271
Influence of hemodynamic changes on neuroendocrine response in acute heart failure
272
Influence of hemodynamics on the performances of intravascular gas exchangers
273
INFLUENCE OF HEMODYNAMICS ON VASCULAR NITRIC OXIDE METABOLISM
274
Influence of heparin molecular size on the induction of C-terminal unfolding in β2-microglobulin
275
Influence of heparin or the presence of cumulus cells during fertilization on the in vitro production of goat embryos
276
Influence of herbaceous elements on butterfly diversity in hedgerow agricultural landscapes
277
Influence of Herbal Early Chick Nutritional Supplement on the Growth Performance, Serum Biochemicals and Immune Response of Broiler Chicken
278
Influence of herbicides on Rhizoctonia root and hypocotyl rot of soybean
279
Influence of herbicides on yield stability of winter wheat cultivars under different sowing rates
280
Influence of herbivory on caesium turnover in a forest ecosystem
281
Influence of heredity on dietary restraint, disinhibition, and perceived hunger in humans
282
Influence of hetero-duplex structure on mechanical properties of Mg–Al/Cu–Zn alloys
283
Influence of Heterogeneity of Mechanical Properties on Hydraulic Fracturing in Permeable Rocks
284
Influence of heterogeneity on fracture behavior in multi-layered materials subjected to thermo-mechanical loading
285
Influence of Heterogeneity on Rayleigh Wave Propagation in an Incompressible Medium Bonded Between Two Half- Spaces
286
Influence of heterogeneity on strength and failure characterization of cement-based composite subjected to uniform thermal loading
287
Influence of heterogeneity on the flow in unconfined aquifers
288
Influence of heterogeneous hydrate distribution on the compressional wave velocity of hydrate-bearing sediment specimens
289
Influence of heterogeneous landscapes on computed green-up dates based on daily AVHRR NDVI observations
290
Influence of heterogenization on catalytic behavior of mono- and bimetallic nanoparticles formed in poly(styrene)-block-poly(4-vinylpyridine) micelles
291
INFLUENCE OF HETEROPHASE STRUCTURE ON THE SURFACE DESTRUCTION OF STEEL
292
Influence of Hf doping on interfacial layers of Ta2O5 stacks studied by ellipsometry
293
Influence of HF treatment of Si on surface electron kinetics
294
Influence of hierarchical architecture of layered titanate on electrochemical properties and Li-insertion performance
295
Influence of hierarchical nanostructures on the gas sensing properties of SnO2 biomorphic films
296
Influence of hierarchical nanostructures on the gas sensing properties of SnO2 biomorphic films
297
Influence of high abundances of aerosols on the electrical conductivity of the Titan atmosphere
298
Influence of high ambient temperatures on food intake and feeding behaviour of multiparous lactating sows
299
Influence of high and low pressure EGR and VGT control on in-cylinder pressure diagrams and rate of heat release in an automotive turbocharged diesel engine
300
Influence of High- and Low-Dose Aprotinin on Activation of Hemostasis in Open Heart Operations
301
Influence of high channel doping on the inversion layer electron mobility in strained silicon n-MOSFETs
302
Influence of high cholesterol diet and pravastatin sodium on the initiation of liver regeneration in rats after partial hepatectomy
303
Influence of high concentration monovalent cations on the protein partitioning in polyethyleneglycol 1500-phosphate aqueous two-phase systems
304
Influence of high concentrations of mineral salts on production process and NaCl accumulation by Salicornia europaea plants as a constituent of the LSS phototroph link Original Research Article
305
Influence of high current pulsed electron beam treatment on the tribological properties of Al–Si–Pb alloy
306
Influence of high dose neutron irradiation on microstructure of EP-450 ferritic–martensitic steel irradiated in three Russian fast reactors
307
Influence of high dose neutron irradiation on thermal conductivity of beryllium
308
Influence of high environmental temperature on egg production and shell quality: a review
309
Influence of high expansion dental stone used as investing medium on the changes in occlusal vertical dimension of complete dentures
310
Influence of high flux hydrogen-plasma exposure on the thermal shock induced crack formation in tungsten
311
Influence of high frequency pulse on electrode wear in micro-EDM
312
Influence of high gas pressure on combustion synthesis of the solid–solid reaction of NiAl compound
313
Influence of high gravity process conditions on the environmental impact of ethanol production from wheat straw
314
Influence of high heat capacity substances doping on quench currents of fast ramped superconducting oval windings Original Research Article
315
Influence of high heat flux loading and irradiation on some promising candidate materials for the divertor structure
316
Influence of high homocysteine and low folate plasmatic levels in medium-term prognosis after acute coronary syndromes
317
Influence of high hydrostatic pressure on Eu2+-luminescence in KMgF3:Eu2+ crystal
318
Influence of high intensity electric field pulses and osmotic dehydration on the rehydration characteristics of apple slices at different temperatures Original Research Article
319
Influence of high intensity interval training on adipose tissue PAI-2 and MMP-2 mRNAs expression in rat with high-fat diet-induced metabolic syndrome
320
Influence of high intensity ultrasound application on mass transport, microstructure and textural properties of pork meat (Longissimus dorsi) brined at different NaCl concentrations Original Research Article
321
Influence of high levels of beet pulp in the diet on endocrine/metabolic traits, slaughter dressing percentage, and ham quality in Italian heavy pigs
322
Influence of high levels of Nb and Ti doping on the dielectric properties of CaCu3Ti4O12 type of compounds
323
Influence of high magnetic field on peritectic transformation during solidification of Bi–Mn alloy
324
Influence of high magnetic field on peritectic transformation during solidification of Bi–Mn alloy
325
Influence of high Mg doping on the microstructural and optoelectronic properties of GaN
326
Influence of high power impulse magnetron sputtering pulse parameters on the properties of aluminum nitride coatings
327
Influence of high pressure gaseous hydrogen on S–N fatigue in two austenitic stainless steels
328
Influence of high pressure homogenization (HPH) on the structural stability of an egg/dairy emulsion Original Research Article
329
Influence of high pressure homogenization and pulp reduction on residual pectinmethylesterase activity, cloud stability and acceptability of Lane Late orange juice: A study to obtain high quality orange juice with extended shelf life Original Research Art
330
Influence of high pressure hydrogen on the tensile and fatigue properties of a high strength Cu–Al–Ni–Fe alloy
331
Influence of high pressure normalizing heat treatment on microstructure and creep strength of high Cr steels
332
Influence of high pressure normalizing heat treatment on microstructure and creep strength of high Cr steels
333
Influence of high pressure normalizing heat treatment on microstructure and creep strength of high Cr steels
334
Influence of high pressure on interactions of 11S globulin Vicia faba with ι-carrageenan in bulk solution and at interfaces
335
Influence of high pressure on the ferromagnetic transition temperature of CrO2
336
Influence of high pressure on the refractive index and density of tholeiite basalt glass
337
Influence of high pressure processing on protein solutions and emulsions
338
Influence of High Strain Rates on the Mechanical Behavior of High Manganese Steels
339
Influence of High Strain Rates on the Mechanical Behavior of High Manganese Steels
340
Influence of high temperature annealing on the structure, hardness and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings
341
Influence of high temperature deformation and double tempering on the microstructure of a H21 tool steel
342
Influence of high temperature deformation on the fracture behavior of a bulk Zr-based metallic glass
343
Influence of high temperature heat treatment on the friction properties of carbon/carbon composites under wet conditions
344
Influence of high temperature hold times on the fatigue crack propagation in Inconel 718
345
Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement
346
Influence of high temperature thermal treatment on grain stability and mechanical properties of medium strength aluminium alloy friction stir welds
347
Influence of high temperature treatment of porous carbon on the electrochemical performance in supercapacitor
348
Influence of high temperature treatments on single-walled carbon nanotubes structure, morphology and surface properties Original Research Article
349
Influence of High Temperatures on Flexural Strength of Foamed Concrete Containing Fly Ash and Polypropylene Fiber
350
Influence of High Temperatures on Surface Cracking of Concrete Studied by Image Scanning Technique
351
Influence of high velocity oxygen-fuel spraying parameters on the wear resistance of Al–SiC composite coatings deposited on ZE41A magnesium alloy
352
Influence of high water levels on aeolian sand transport: upper beach/dune evolution on a macrotidal coast, Wissant Bay, northern France
353
Influence of High-Dose Highly Efficient Statins on Short-Term Mortality in Patients Undergoing Percutaneous Coronary Intervention With Stenting for Acute Coronary Syndromes
354
Influence of High-Dose Highly Efficient Statins on Short-Term Mortality in Patients Undergoing Percutaneous Coronary Intervention With Stenting for Acute Coronary Syndromes
355
Influence of high-dose oral erythromycin on feeding intolerance in preterm neonates: A randomized controlled trial
356
Influence of high-efficiency particulate air filtration on indoor air fungal contamination in a hospital in Mashhad, Iran
357
Influence of high-energy ball milling of precursor on the morphology and electrochemical performance of Li4Ti5O12–ball-milling time
358
Influence of high-energy ball milling of the starting powder on the sintering; microstructure and oxygen permeability of Ba0.5Sr0.5Co0.5Fe0.5O3−δ membranes
359
Influence of high-energy electron irradiation on the conduction behavior of doped polyaniline films in the high current density regime
360
Influence of high-energy electron irradiation on the transport properties of La1-xCaxMnO3 films (x ~ 1/3)
361
Influence of high-energy impact actions on the elastic and anelastic properties of martensitic Cu-Al-Ni crystals
362
Influence of high-energy Si+ ion irradiation on microstructure and mechanical properties of alumina films
363
Influence of high-energy X-ray irradiation on the optical properties of tetraphenylporphyrin thin films
364
Influence of high-frequency AC fields on mass transfer in solvent extraction
365
Influence of high-frequency ambient pressure pumping on carbon dioxide efflux from soil
366
Influence of high-intensity ultrasound on grain refining performance of Al–5Ti–1B master alloy on aluminium
367
Influence of high-j intruder orbitals in odd mass transfermium nuclei 253No and 251Md Original Research Article
368
Influence of highly branched poly(amido amine) on the properties of hyperbranched polyurethane/clay nanocomposites
369
Influence of high-M alginate on the growth and survival of Atlantic cod (Gadus morhua L.) and spotted wolffish (Anarhichas minor Olafsen) fry
370
Influence of high-optical power light launched into optical fibers in MT connector
371
Influence of high-power plasma streams irradiation on surface erosion behavior of reversible hydrogen getters
372
Influence of high-pressure gaseous hydrogen on the low-cycle fatigue and fatigue crack growth properties of a cast titanium alloy
373
Influence of high-pressure hydrogen treatment on structural and electrical properties of ZnO thin films
374
Influence of high-pressure on cononsolvency of poly(N-isopropylacrylamide) nanogels in water/methanol mixtures
375
Influence of high-pressure treatment on β-lactoglobulin–pectin associations in emulsions and gels
376
Influence of High-Speed Machine Tool Control Parameters on the Contouring Accuracy. Application to Linear and Circular Interpolation
377
Influence of high-temperature and low-humidity curing on chloride penetration in blended cement concrete
378
Influence of high-temperature creep stress on growth of thermally grown oxide in thermal barrier coatings
379
Influence of High-Temperature Drying on Structural and Textural Properties of Durum Wheat Pasta
380
Influence of high-temperature solution treatments on mechanical properties of an Al–Si–Cu aluminum alloy Original Research Article
381
Influence of high-velocity impact on metals
382
Influence of hill slope on biological pools of carbon, nitrogen, and phosphorus in acidic alfisols of citrus orchard
383
Influence of Hillside Gradient on Forest Road Cross Section Components in a Loamy Clay Soil
384
Influence of hindered phenol additives on the rheology of aged polymer-modified bitumen
385
Influence of HIP pressure on tensile properties of a 14Cr ODS ferritic steel
386
Influence of Histone Tails and H4 Tail Acetylations on Nucleosome–Nucleosome Interactions
387
Influence of historic sheep grazing on vegetation and soil properties of a Desert Steppe in Inner Mongolia
388
Influence of history and environment on the sediment dynamics of intertidal flats
389
Influence of history of heart failure on diagnostic performance and utility of B-type natriuretic peptide testing for acute dyspnea in the emergency department
390
Influence of history of smoking on the physical capacity of older people
391
Influence of History, Geography, and Economics on the Elimination of Malaria: A Perspective on Disease Persistence in Rural Areas of Zambia
392
Influence of HIV co-infection on hepatitis C immunopathogenesis
393
Influence of HIV-1 on induced expression of granulopoietic factors: The role of HIV-1 vpr
394
Influence of HLA alleles on outcome of hepatitis C virus infection
395
Influence of HLA-DRB-1 alleles on the production of antibody against CSP, MSP-1, AMA-1, and DBP in Brazilian individuals naturally infected with Plasmodium vivax
396
Influence of HMG–CoA reductase inhibitors on markers of coagulation, systemic inflammation and soluble cell adhesion
397
Influence of HNO3 oxidation on the structure and adsorptive properties of corncob-based activated carbon Original Research Article
398
Influence of HNO3/H3PO4–NANO2 mediated oxidation on the structure and properties of cellulose fibers
399
Influence of Ho substitution for Nd on magnetic properties of the Nd1−xHoxMn2Ge2 germanides
400
Influence of hold period on creep–fatigue deformation behaviour of nickel base superalloy
401
Influence of hold period on creep–fatigue deformation behaviour of nickel base superalloy
402
Influence of hold time on cyclic stress response and fracture behavior of an Al–Mg–Si alloy
403
Influence of hold time on cyclic stress response and fracture behavior of an Al–Mg–Si alloy
404
Influence of hold times on the elevated-temperature fatigue behavior of an oxide–oxide ceramic composite in air and in steam environment
405
Influence of holding temperature on the growth and survival of Salmonella spp. and Staphylococcus aureus and the production of staphylococcal enterotoxin in egg products
406
Influence of Holding Time After Deformation on Bainite Transformation in Niobium Microalloyed Steel Original Research Article
407
Influence of hole extraction efficiency on the performance and stability of organic solar Cells
408
Influence of hole imperfection on jet cross flow interaction
409
Influence of hole mobility on the response characteristics of p-type nickel oxide thin film based glucose biosensor Original Research Article
410
Influence of hole shape on the performance of a turbine vane endwall film-cooling scheme
411
Influence of hollow cathode plasma on AlCrN-thin film deposition with vacuum arc evaporation sources
412
Influence of hollow imperfections in adhesive on the interfacial bond behaviors of FRP-plated RC beams
413
Influence of hollow site adsorption in a model for the catalytic CO+O2 and CO+NO reaction Original Research Article
414
Influence of holm oak leaf decomposition stage on the biology ofOnychiurus sinensis Stach (Collembola: Onychiuridae)
415
Influence of holmium doping on the optical properties of quaternary InGaAsP epitaxial layers
416
Influence of home-related factors in Numeracy performance of fourth-grade children in Mauritius
417
Influence of Homoallylic Fluorine Atoms on the Regioselectivity of theWacker Reaction
418
Influence of homocysteine on the physical structure and molecular mobility of elastin network in cultured arteries
419
Influence of homogeneous magnetic field on the content of ten trace elements in stipe and cap oyster mushroom (Pleurotus Florida)
420
Influence of homogenisation on the solution properties of oat β-glucan
421
Influence of homologous disaccharides on the hydrogen-bond network of water: complementary Raman scattering experiments and molecular dynamics simulations Original Research Article
422
Influence of hood geometry on the compression wave generated by a high-speed train
423
Influence of hopper geometry on radial and axial concentration profiles of segregated and homogenized granular mixture flows
424
Influence of horizontal resistance at plate bottom on vibration of plates on elastic foundation under moving loads
425
Influence of horizontal return bend on the two-phase flow pattern in small diameter tubes
426
Influence of horizontal tube banks on the behavior of bubbling fluidized beds: 2. Mixing of solids
427
Influence of hormonal cycle in women on lateralization of brain activation during performing a mental rotation task
428
Influence of hormonal status and oral intake on phase angle in HIV-infected men
429
Influence of hormone supplementation to extended semen on artificial insemination, uterine contractions, establishment of a sperm reservoir, and fertility in swine
430
Influence of hormones in the expression of Indoleamine-2,3-dioxigenase in cultured cells from bovine placenta
431
Influence of hormones in the expression of Indoleamine-2,3-dioxigenase in cultured cells from bovine placenta
432
Influence of hormones in the expression of Indoleamine-2,3-dioxigenase in cultured cells from bovine placenta
433
Influence of hormones in the expression of Indoleamine-2,3-dioxigenase in cultured cells from bovine placenta
434
Influence of hormones in the expression of Indoleamine-2,3-dioxigenase in cultured cells from bovine placenta
435
Influence of hormones in the expression of Indoleamine-2,3-dioxigenase in cultured cells from bovine placenta
436
Influence of Hormones of IAA, IBA, and NAA on Improvement of Rooting and Early Growth of Tilia rubra subsp. caucasica Form Angulata (Rupr.) V. Engler
437
Influence of Hospital Length of Stay for Heart Failure on Quality of Care
438
Influence of hospital volume on local recurrence and survival in a population sample of rectal cancer patients
439
Influence of hospital volume on the frequency of abdominoperineal resections and long-term oncological outcomes in low rectal cancer
440
Influence of host anemone (Stichodactyla haddoni, saville-kent, 1893) locomotion on its resident anemonefish reproduction
441
Influence of Host Condition on the Performance of Rhopalomyia n. sp. (Diptera: Cecidomyiidae), a Biological Control Agent for Scentless Chamomile, Tripleurospermum perforatum
442
Influence of host cultivars and Rhizobium species on the growth and symbiotic performance of Phaseolus vulgaris under salt stress
443
Influence of host electronic structure on lithium intercalation process
444
Influence of host migration between woodland and pasture on the population dynamics of the tick Ixodes ricinus: A modelling approach
445
Influence of host migration between woodland and pasture on the population dynamics of the tick Ixodes ricinus: A modelling approach
446
INFLUENCE OF HOST PLANT SPECIES ON THE POPULATION DYNAMICS OF Quadraspidiotus perniciosus COMSTOCK
447
Influence of host plants on feeding, growth and reproduction of Papilio polytes (The common mormon)
448
Influence of host preparation method on the structural phase transitions of syndiotactic polystyrene upon the guest exchange with n-alkanes
449
Influence of host resistance and phenology on South American leaf blight of the rubber tree with special consideration of temporal dynamics
450
Influence of host seed on metabolic activity of Enterobacter cloacae in the spermosphere
451
Influence of host seed on metabolic activity of Enterobacter cloacae in the spermosphere
452
Influence of host species on the evolution of the nonstructural (NS) gene of influenza A viruses
453
Influence of Host Stage on Oviposition, Development, Sex Ratio, and Survival of Anagyrus kamaliMours\ (Hymenoptera: Encyrtidae), a Parasitoid of the Hibiscus Mealybug, Maconellicoccus hirsutus Green (Homoptera: Pseudococcidae)
454
Influence of hot corrosion on low cycle fatigue behavior of nickel base superalloy SU 263
455
Influence of hot deformation strain rate on the mechanical properties and microstructure of K310 cold work tool steel
456
Influence of hot isostatic pressing on the fracture transitions in the fine grain MAR-M247 superalloys
457
Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder
458
Influence of hot phonons on wind forces in metallic single walled carbon nanotubes Original Research Article
459
Influence of hot plastic deformation and cooling rate on martensite and bainite start temperatures in 22MnB5 steel
460
Influence of Hot Press Forming Techniques on Properties of Vehicle High Strength Steels Original Research Article
461
Influence of hot pressing on microstructure and mechanical properties of combustion synthesized TiB2–Cu–Ni composite
462
Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics
463
Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2/TiN tool material
464
Influence of hot pressing temperature on the microstructure and mechanical properties of 75% Cu–25% Sn alloy
465
Influence of hot rolling and high speed hydrostatic extrusion on the microstructure and mechanical properties of an ODS RAF steel
466
Influence of Hot Rolling on Cube Texture of Ni Substrate for Coated Conductor
467
Influence of hot rolling on the deformation behavior of particle reinforced aluminum metal matrix composite
468
Influence of hot rolling parameters on microstructure and biodegradability of Mg–1Ca alloy in simulated body fluid
469
Influence of hot tool parameters on heat recovery in a space-heating and ventilation system
470
Influence of Hot Water Treatments on the Storage Life of Sweet Orange Cv. Sherkhana-I
471
INFLUENCE OF HOT WORKING ON ELECTRO SLAG REMELTED LOW ALLOY STEEL
472
INFLUENCE OF HOT WORKING ON ELECTRO SLAG REMELTED LOW ALLOY STEEL
473
Influence of household biogas digester use on household energy consumption in a semi-arid rural region of northwest China
474
Influence of household practices on the performance of clay pot water filters in rural Cambodia Original Research Article
475
Influence of Housing Floor on Air Quality, Growth Traits, and Immunity in Broiler Chicken Farms
476
Influence of housing system during gestation on the behaviour and welfare of gilts in farrowing crates
477
Influence of housing systems on stillbirth and mortality rate in preweaning pigs farrowed by different gilt breeds
478
Influence of Housing Systems on the Performance and Reproductive Characteristics of Wearner Rabbits Reared in Port Harcourt, Rivers State, Nigeria
479
Influence of HPP conditions on selected beef quality attributes and their stability during chilled storage
480
Influence of HSA on the properties of OA/OAM monolayers and the growth of calcium oxalate
481
Influence of Hudiara Drain Water Irrigation on Trace Elements Load In Soil and Uptake By Vegetables
482
Influence of human dentine on the antibacterial activity of self-etching adhesive systems against cariogenic bacteria
483
Influence of human gastric juice on oxidation of marine lipids – in vitro study
484
Influence of human impacts on Albeluvisol analysed by X-ray microfluorescence: Relative evolution of the transforming front at the tongue scale
485
Influence of human tooth cryopreservation on dentin bond strength
486
Influence of human urine combined with farm yard manure and chemical fertilizers on french bean and maize cropping sequence in lateritic soils of Karnataka, India
487
Influence of humic acid on germination, morphological characteristics and photosynthesis pigments of Trifolium alexandrium L. under salinity stress
488
Influence of humic acid on the flocculation of clay
489
Influence of humic acid on the sorption of pentachlorophenol by aged sediment amended with rice-straw biochar
490
Influence of humic acid on the transport behavior of bacteria in quartz sand
491
Influence of humic acids on oil sand processing. Part I: Detection and quantification of humic acids in oil sand ores and their effect on bitumen wettability
492
Influence of humic acids on oil sand processing. Part II: Relationship between bitumen extraction, humic acids concentration and power draw measurements on oil sand slurries
493
Influence of Humic Acids on Radium Adsorptionby Coir Pith in Aqueous Solution(Pengaruh Asid Humik terhadap Penjerapan Radium olehSabut Kelapa di dalam Larutan Akueus)
494
INFLUENCE OF HUMIC SUBSTANCE ALTERATION DURING SOIL PASSAGE ON THEIR TREATMENT BEHAVIOUR
495
INFLUENCE OF HUMIC SUBSTANCE ALTERATION DURING SOIL PASSAGE ON THEIR TREATMENT BEHAVIOUR
496
Influence of humic substances on bioavailability of Cu and Zn during sewage sludge composting
497
Influence of humic substances on phosphate adsorption by aluminium and iron oxides
498
Influence of humic substances on the photolysis of aqueous pesticide residues Original Research Article
499
Influence of humic substances on the riboflavin photosensitized transformation of 2,4,6-trimethylphenol
500
Influence of humic substances on the toxic effects of cadmium and zinc to the green alga Pseudokirchneriella subcapitata
501
Influence of humic, fulvic and hydrophilic acids on the growth, photosynthesis and respiration of the dinoflagellate Prorocentrum minimum (Pavillard) Schiller
502
Influence of humid atmosphere on phase separation in polyaniline–polystyrene thin films
503
Influence of humid environment on the performance of high strength structural carbon fiber composites
504
Influence of humidity and doping elements on the friction and wear of SiC in unlubricated sliding
505
Influence of humidity and thermal decomposition on the protonic conductivity of single and polycrystalline CsH2PO4
506
Influence of humidity conditions on shear strength of clay rock discontinuities
507
Influence of humidity on atmospheric pressure air plasma treatment of aluminium surfaces
508
Influence of humidity on CO sensing with p-type CuO thick film gas sensors
509
Influence of humidity on CO sensing with p-type CuO thick film gas sensors
510
Influence of humidity on dimensional stability of a range of ion-leachable cements
511
Influence of humidity on high temperature oxidation of Inconel 600 alloy: Oxide layers and residual stress study
512
Influence of humidity on microstructure and electrical characteristics of (PEO–plasticiser)nLiAl(SO3Cl)4 polymer electrolytes
513
Influence of humidity on the electrical charging properties of cork agglomerates
514
Influence of humidity on the electrical properties of potassium triiodomercurate
515
Influence of humidity on the flexural strength of alumina
516
Influence of humidity on the fretting wear of self-mated tetragonal zirconia ceramics Original Research Article
517
Influence of humidity on the friction of diamond and diamond-like carbon materials
518
Influence of humidity on the nanoadhesion between a hydrophobic and a hydrophilic surface
519
Influence of humidity on the permittivity and conductivity of thin zirconium alloy oxide films
520
Influence of humidity on the photoemission properties and surface morphology of cesium iodide photocathode
521
Influence of humidity on the photoemission properties and surface morphology of cesium iodide photocathode
522
Influence of humidity on the thermal behavior of aluminum nanopowders
523
Influence of humoral and neurohormonal factors on cardiovascular hypertrophy in intreated essential hypertensives
524
Influence of humorous leadership at workplace on the innovative behavior of leaders and their leadership effectiveness
525
Influence of hunting-season stage and ripening conditions on nitrogen fractions and degradation of myofibrillar proteins in venison (Cervus elaphus) chorizo sausages
526
Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T7
527
Influence of HVOF spraying parameters on in-flight characteristics of Inconel 718 particles and correlation with the electrochemical behaviour of the coating
528
Influence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment
529
Influence of hyaluronic acid or phorbol 12-myristate 13-acetate on the migration capacity of a murine lymphoma cell line (Eb) and its metastatic variant (ESb)
530
Influence of hyaluronidase addition on the production of hyaluronic acid by batch culture of Streptococcus zooepidemicus
531
Influence of hydrated lime on the surface properties and interaction of kaolinite particles
532
Influence of hydration of food additive polysaccharides on FT-IR spectra distinction
533
Influence of hydration on fiber geometry in electrospun scaffolds
534
Influence of hydration on the fluidity of normal Portland cement pastes
535
Influence of hydraulic retention time on fouling in a UASB coupled with an external ultrafiltration membrane treating synthetic municipal wastewater Original Research Article
536
Influence of hydraulic retention time on the nature of foulant organics in a high rate membrane bioreactor Original Research Article
537
Influence of hydraulic retention time on the operation of a submerged membrane sequencing batch reactor (SM-SBR) for the treatment of greywater Original Research Article
538
Influence of hydraulic shock loads and TDS on the performance of large-scale CETPs treating textile effluents in India
539
Influence of hydrocarbon injection on the compaction by pressure-solution of a carbonate rock: An experimental study under triaxial stresses
540
Influence of hydrocarbon molecular size on the selective catalytic reduction of NO by hydrocarbons over Cu-MFI zeolite Original Research Article
541
Influence of hydrocarbon structure on selective catalytic reduction of NO by hydrocarbons over Cu-Al2O3
542
Influence of hydrocarbons on element detection in ion images by SIMS microscopy
543
Influence of hydrocarbons on vibrational excitation of H2 molecules
544
Influence of hydrochloric acid etching on bond strength between concrete substrate and repair materials
545
Influence of hydrocolloid nature on the structure and functional properties of emulsified edible films
546
Influence of Hydrocolloids on Dough Properties and Quality of Barbari: An Iranian Leavened Flat Bread
547
Influence of hydrocolloids on dough rheology and bread quality
548
Influence of hydrocolloids on phase separation and emulsion properties of whey protein isolate Original Research Article
549
Influence of hydrocooling on browning and quality of litchi cultivar Feizixiao during storage
550
Influence of hydrodynamic conditions on the start-up of methanogenic inverse turbulent bed reactors
551
Influence of hydrodynamic forces and interfacial momentum transfer on the flow of two immiscible phases
552
Influence of hydrodynamic instability on the heat transfer coefficient during condensation of R134a and R404A refrigerants in pipe mini-channels
553
Influence of hydrodynamic interactions between particles on the turbulent flow in a suspensio
554
Influence of hydrodynamic interactions between particles on the turbulent flow in a suspension
555
Influence of hydrodynamic stress in the growth of Scenedesmus obliquus using a culture medium based on olive-mill wastewater
556
Influence of hydrodynamics in tangential and dynamic ultrafiltration systems for microalgae separation
557
Influence of hydrodynamics on the dynamics of a homopolymer
558
Influence of hydrodynamics on the interpretation of the high pT hadron suppression at RHIC Original Research Article
559
Influence of Hydrodynamics on the Performance of a Biofilm Airlift Suspension Reactor
560
Influence of hydrofluoric acid on extraction of thorium using a commercially available extraction chromatographic resin
561
Influence of hydrogel composite applications and irrigation intervals on the yield and fruit quality of Valencia orange ( Citrus sinensis L.) trees under semi-arid conditions
562
Influence of hydrogel mechanical properties and mesh size on vocal fold fibroblast extracellular matrix production and phenotype
563
Influence of hydrogel polymer and NO3-: NH4+ ratios on dill (Anethum graveolens L.) seed essential oil composition and yield
564
Influence of Hydrogel Type and Concentration, and Water Application Rate on some Hydraulic Properties of a Sandy Soil
565
Influence of hydrogen addition and gas pressure on nitride layer formation on microcrystalline silicon thin films by a hot-wire chemical vapor method using nitrogen gas
566
Influence of hydrogen and low temperature on mechanical behaviour of two pipeline steels
567
Influence of hydrogen and oxygen on the melt properties and the crystal growth in silicon
568
Influence of hydrogen and oxygen on the melt properties and the crystal growth in silicon
569
Influence of hydrogen and oxygen plasma treatment on field emission characteristics of boron nitride thin films
570
Influence of hydrogen and tungsten concentration on the tribological properties of DLC/DLC contacts with ZDDP
571
Influence of hydrogen annealing on the properties of hafnium oxide thin films
572
Influence of hydrogen bond on rheological properties of solventless UV crosslinkable pressure sensitive acrylic adhesive prepolymers
573
Influence of Hydrogen Bonding in Competition with Lattice Interactions on Carbonyl Coordination at Phosphorus. Implications for Phosphoryl Transfer Activated States1
574
Influence of hydrogen bonding on coordination polymer assembly
575
Influence of hydrogen bonding on electrochromic properties of conducting polymers
576
Influence of hydrogen bonding on the thermal behaviour of some amides and thioamides
577
Influence of hydrogen bonding upon the TiO2 photooxidation of isopropanol and acetone in aqueous solution
578
Influence of hydrogen bonds and double bonds on the alkane and alkene derivatives self-assembled monolayers on HOPG surface: STM observation and computer simulation
579
Influence of hydrogen contamination on the tensile behavior of a plasma ion nitrided steel
580
Influence of hydrogen contamination on the tensile behavior of a plasma ion nitrided steel
581
Influence of hydrogen content and microstructure on the fatigue behaviour of steel SAE 52100 in the VHCF regime
582
Influence of hydrogen content and sputtering characteristics on the properties of ZnO:Al transparent conductive layers deposited on polymer substrate
583
Influence of hydrogen content on fracture toughness of CWSR Zr–2.5Nb pressure tube alloy
584
Influence of hydrogen content on impact toughness of Zr–2.5Nb pressure tube alloy
585
Influence of hydrogen content on tensile and compressive properties of Ti–6Al–4V alloy at room temperature
586
Influence of hydrogen content on the tensile properties and fracture of austenitic stainless steel welds
587
Influence of hydrogen desorption on the generation of defects in LEPECVD
588
Influence of hydrogen desorption on the generation of defects in LEPECVD
589
Influence of hydrogen dilution on a-SiSn:H film growth and solar cell properties
590
Influence of hydrogen dilution on low-temperature polycrystalline silicon formation using RF excitation SiH4/H2 plasma
591
Influence of hydrogen dilution on structural, electrical and optical properties of hydrogenated nanocrystalline silicon (nc-Si:H) thin films prepared by plasma enhanced chemical vapour deposition (PE-CVD)
592
Influence of hydrogen distribution on magnetic properties of amorphous samples
593
Influence of hydrogen enriched gas injection upon polluting emissions from pulverized coal combustion
594
Influence of hydrogen from cathodic protection on the fracture susceptibility of 25%Cr duplex stainless steel – Constant load SENT testing and FE-modelling using hydrogen influenced cohesive zone elements
595
Influence of hydrogen gas over the interference of acids in inductively coupled plasma atomic emission spectrometry
596
Influence of Hydrogen in the Presence of Organic Matter on Bacterial Activity Under Radioactive Waste Disposal Conditions
597
Influence of hydrogen on electrical resistivity of Ti66Ni20Cu10Si4 amorphous alloy
598
Influence of hydrogen on Fe–Mg interdiffusion in (Mg,Fe)O and implications for Earth’s lower mantle
599
Influence of hydrogen on formation and stability of Zr-based quasicrystals
600
Influence of hydrogen on formation and stability of Zr-based quasicrystals
601
Influence of Hydrogen on GBF in Very High Cycle Fatigue of High Strength Steel Original Research Article
602
Influence of hydrogen on rumen methane formation and fermentation balances through microbial growth kinetics and fermentation thermodynamics
603
Influence of hydrogen on SiON thick film for silica waveguide deposited by PECVD and annealing effect
604
Influence of hydrogen on the corrosion behavior of stainless steels in lithium
605
Influence of hydrogen on the deformation behaviour of a ferritic fine-grained low alloy steel
606
Influence of hydrogen on the formation of a thin layer of carbon nanofibers on Ni foam Original Research Article
607
Influence of hydrogen on the magnetic and electrical properties of GdI2Hx (0⩽x⩽1)
608
Influence of hydrogen on the magnetic properties of Fe85Zr3.5Nb3.5B7Cu1 nanocrystalline alloy
609
Influence of hydrogen on the mechanical properties of some medium-strength Ni–Cr–Mo steels
610
Influence of hydrogen on the thermomechanical properties of a-CNx:H and a-CNx films deposited by glow discharge and ion beam assisted deposition
611
Influence of hydrogen on the toughness of irradiated reactor pressure vessel steels
612
Influence of hydrogen partial pressure on hydrodenitrogenation of pyridine, aniline and quinoline
613
Influence of hydrogen passivation on majority and minority charge carrier mobilities in ribbon silicon
614
Influence of Hydrogen Peroxide and Nanofertilizer on Rusts Development and Wheat Productivity
615
Influence of hydrogen peroxide on the in vitro infectivity of human immunodeficiency virus
616
Influence of hydrogen peroxide-based bleaching agents on the bond strength of resin–enamel/dentin interfaces
617
Influence of hydrogen reduction on the structure of PbSiO3 glass: an EXAFS study
618
Influence of hydrogen sulfide addition on the alumina deposition by plasma CVD
619
Influence of hydrogen surface coverage on atomic particle reflection
620
Influence of hydrogenase overexpression on hydrogen production of Clostridium acetobutylicum DSM 792
621
Influence of hydrogenated amorphous carbon coatings on the formation of paraffin deposits
622
Influence of hydrogenated fat and butter on CVD risk factors: remnant-like particles, glucose and insulin, blood pressure and C-reactive protein
623
Influence of hydrogenation on the structural and magnetic properties of compounds based on cerium and crystallizing in the tetragonal CeFeSi-type structure
624
Influence of hydrogenation on the structure and visible photoluminescence of germanium oxide thin films
625
Influence of hydrogen-induced ordering on the tensile and fatigue characteristics of the alloy system Pd1 − xMnx (x = 0.1–0.25)
626
Influence of hydrogen-induced ordering on the tensile and fatigue characteristics of the alloy system Pd1 − xMnx (x = 0.1–0.25)
627
Influence of hydrogeochemical processes on zero-valent iron reactive barrier performance: A field investigation
628
Influence of hydrogeology, microbiology and landscape history on the geochemistry of acid hypersaline waters, N.W. Victoria
629
Influence of hydro-geomorphology, land-use and riparian zone characteristics on herbicide occurrence and distribution in sediments in Songhua River Basin, northeastern China
630
Influence of hydrological and climatic parameters on spatial-temporal variability of fluorescence intensity and DOC of karst percolation waters in the Santana Cave System, Southeastern Brazil
631
Influence of hydrological and geochemical processes on the transport of chelated metals and chromate in fractured shale bedrock
632
Influence of hydrological and hydrogeochemical parameters on arsenic variation in shallow groundwater of southwestern Taiwan
633
Influence of hydrological fluxes on the structure of nitrate-reducing bacteria communities in a peatland
634
Influence of hydrological fluxes on the structure of nitrate-reducing bacteria communities in a peatland
635
Influence of hydrological regime on pore water metal concentrations in a contaminated sediment-derived soil
636
Influence of Hydrological Variables on Macrophytes in a Black Water River Ecosystem
637
Influence of hydrology on heavy metal speciation and mobility in a Pb–Zn mine tailing
638
Influence of Hydrology on Rainfall-Runoff Metal Element Speciation
639
Influence of hydrolysis conditions of the acetate sol–gel process on the stoichiometry of PZT powders
640
Influence of hydrolytic ageing on the acoustic emission signatures of damage mechanisms occurring during tensile tests on a polyester composite: Application of a Kohonen’s map
641
Influence of hydrophobe content and salt concentration on dilute solution behaviour of hydrophobically modified ionic polymers from diallylammonium salts/sulfur dioxide cyclocopolymerization: Light scattering and fluorescence spectroscopy
642
Influence of hydrophobe content on the solution rheology of hydrophobically modified terpolymer of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride
643
Influence of hydrophobic substance on enhancing washing durability of water soluble flame-retardant coating
644
Influence of hydrophobically modified inulin (INUTEC NRA) on the stability of vulcanized natural rubber latex
645
Influence of hydrophobically modified polyelectrolytes on CTAB-based w/o microemulsions
646
Influence of hydrophobicity on retention in nanofiltration of aqueous solutions containing organic compounds
647
Influence of hydrophobicity on the mixed micelles of Pluronic F127 and P103 plus cationic surfactant mixtures
648
Influence of hydrophobisation of carbon surface on electrochemical capacitor performance
649
Influence of hydropower dams on the composition of the suspended and riverbank sediments in the Danube
650
Influence of hydro-priming duration on field performance of pinto bean (Phaseolus vulgaris L.) cultivars
651
Influence of hydro-sedimentary factors on mollusc death assemblages in a temperate mixed tide-and-wave dominated coastal environment: Implications for the fossil record
652
Influence of hydrostatic pressure and gas content on continuous ultrasound emulsification
653
Influence of hydrostatic pressure and gas content on continuous ultrasound emulsification
654
Influence of hydrostatic pressure and sound amplitude on the ultrasound induced dispersion and de-agglomeration of nanoparticles
655
Influence of hydrostatic pressure and sound amplitude on the ultrasound induced dispersion and de-agglomeration of nanoparticles
656
Influence of hydrostatic pressure on the mechanical behavior and properties of unidirectional, laminated, graphite-fiber/epoxy-matrix thick composites
657
Influence of hydrothermal aging on the catalytic activity of sulfated zirconia Original Research Article
658
Influence of hydrothermal and mechanical conditions on the strength of zirconia
659
Influence of Hydrothermal and Pyrolysis Processes on the Transformation of Organic Matter of Dense Low-Permeability Rocks from Domanic Formations of the Romashkino Oil Field
660
Influence of hydrothermal carbonization on formation of curved graphite structures obtained from a lignocellulosic precursor
661
Influence of hydrothermal conditions on the morphology and particle size of zinc oxide powder
662
Influence of hydrothermal modification on the properties of Ni/Al2O3 catalyst
663
Influence of hydrothermal processes on selected physical properties of oat grain Original Research Article
664
Influence of hydrothermal synthesis conditions on BNT-based piezoceramics
665
Influence of hydrothermal synthesis temperature on the structures of two 3D coordination polymers
666
Influence of hydrothermal temperature on hydroxyapatite coating transformed from monetite on HT-C/C composites by induction heating method
667
Influence of Hydrothermal Temperature on Structures and Photovoltaic Properties of SnO2 Nanoparticles
668
Influence of hydrothermal treatment conditions on the formation and breakdown of phosphates with zeolitic structure
669
Influence of hydrothermal treatment of maize grains on the quality and acceptability of Tuwon masara (traditional maize gel)
670
Influence of hydrothermal treatment on the dimensional stability of beech wood
671
Influence of hydrothermally modified γ-Al2O3 on the properties of NiMo/γ-Al2O3 catalyst
672
Influence of hydrothermally-synthesized LaPO4:Tb3+ nanorods on the physical and physico-chemical properties of photo-structured acrylate material
673
Influence of hydroxyapatite pore geometry on tigecycline release kinetics
674
Influence of hydroxyl contents on photocatalytic activities of polymorphic titania nanoparticles
675
Influence of hydroxyl group configuration on pyrolytic formation of 1,6-anhydrohexopyranoses from various hexoses: An experimental and theoretical study
676
Influence of hydroxyl group configuration on pyrolytic formation of 1,6-anhydrohexopyranoses from various hexoses: An experimental and theoretical study
677
Influence of hydroxyl groups on the biological properties of cationic polymethacrylates as gene vectors
678
Influence of Hydroxypropyl Methylcellulose Molecular Weight Grade on Water Uptake, Erosion and Drug Release Properties of Diclofenac Sodium Matrix Tablets
679
Influence of hydroxypropylation on retrogradation properties of native, defatted and heat-moisture treated potato starches
680
Influence of hydroxypropylcyclodextrins on the toxicity of mixtures
681
Influence of hydroxypropylguars on rheological behavior of cement-based mortars
682
Influence of hydroxypropylmethyl cellulose–sodium dodecylsulfate interaction on the solution conductivity and viscosity and emulsion stability
683
Influence of hydroxypropylmethylcellulose (HPMC), xanthan gum and their combination on loaf specific volume, crumb hardness and crumb grain characteristics of gluten-free breads based on rice, maize, teff and buckwheat
684
Influence of hydroxypropylmethylcellulose addition and homogenization conditions on properties and ageing of corn starch based films
685
Influence of hydroxypropyl-β-cyclodextrin (HPCD) on the bioavailability and biodegradation of pyrene
686
Influence of hygrothermal aging on the gas and water transport properties of Nafion® membranes
687
Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates
688
Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid composites
689
Influence of hygrothermally degraded polyester-urethane on physical and mechanical properties of chloroprene rubber
690
Influence of hypercholesterolemia and endothelin-3 pre-treatment on the effects of shear forces on platelet aggregation and cyclic GMP content Original Research Article
691
Influence of hypercholesterolemia and hypertension on ischemia-reperfusion induced P-selectin expression
692
Influence of hyperglyceamia on some haemorheological markers in diabetic Nigerians
693
Influence of hypergravity on fish inner ear otoliths: I. Developmental growth profile Original Research Article
694
Influence of hypergravity on fish inner ear otoliths: II. Incorporation of calcium and kinetotic behaviour Original Research Article
695
Influence of Hypernatremia and Polyuria of Brain-Dead Donors Before Organ Procurement on Kidney Allograft Function
696
Influence of Hypoxia and Sex on Hyponatremic Encephalopathy
697
Influence of Hypoxia in Bronchial Response to Bronchoconstrictor Substances at Newborn with Distress Respiratory Syndrome (DRS)
698
Influence of hysteresis on tidal capillary fringe dynamics in a well-sorted sand
699
Influence of hysteretic dampers on the seismic response of reinforced concrete wide beam–column connections
700
Influence of hysteretic dissipation on chaotic responses
701
Influence of I− anions on the formation and stabilization of copper nanoparticles
702
INFLUENCE OF IBA AND NAA (0.8%) + (IBA 0.5%) PHYTOREGULATORS TO THE RISOGENESISOF THE MATURE LEMON TREE-SHOOTS (Citrus limon (L.) Burm. and Citrus meyearii Y. Tan.)
703
Influence of ice and snow covers on the UV exposure of terrestrial microbial communities: dosimetric studies
704
Influence of ice films morphology on HCl uptake
705
Influence of ice rheology and dust content on the dynamics of the north-polar cap of Mars
706
Influence of ice sheet and glacial erosion on passive margins of Greenland
707
Influence of ICT Adoption on Agro-Enterprises: Conceptual Framework and Structural Model
708
Influence of Idealized Fashion Models on Purchasing Behavior
709
Influence of IFN-γ polymorphism on the development of coronary vasculopathy after cardiac transplantation
710
Influence of IGF-I on buffalo (Bubalus bubalis) spermatozoa motility, membrane integrity, lipid peroxidation and fructose uptake in vitro
711
Influence of ignition parameters on micropyretic synthesis of NiAl compound
712
Influence of ignored and well-known zone distortions on the separation performance of proteins in capillary free zone electrophoresis with special reference to analysis in polyacrylamide-coated fused silica capillaries in various buffers: I. Theoretical s
713
Influence of ignored and well-known zone distortions on the separation performance of proteins in capillary free zone electrophoresis with special reference to analysis in polyacrylamide-coated fused silica capillaries in various buffers: II. Experimental
714
Influence of IL-12 on interferon-γ production by bovine leucocyte subsets in response to bovine respiratory syncytial virus
715
Influence of IL-12 on interferon-γ production by bovine leucocyte subsets in response to bovine respiratory syncytial virus
716
Influence of IL-20 on lumbar disc degeneration: An experimental study
717
Influence of illuminating and viewing aperture size on the color of dental resin composites
718
Influence of illumination on the characterization of banana ripening Original Research Article
719
Influence of illumination on the output characteristics in pentacene thin film transistors
720
Influence of image terms on s- and p-shell contributions to the asymmetry parameter of image decay Original Research Article
721
Influence of images recording height and crop growth stage on leaf cover estimates and their performance in yield prediction models
722
Influence of imaging on touch imprint cytology of breast lesions
723
Influence of IMF draping direction and crustal magnetic field location on Martian ion beams
724
Influence of Immediate Coronal Restoration Placement on Microhardness of CEM Cement: An In Vitro Study
725
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints
726
Influence of immersion cycles on the stoichiometry of CdS films deposited by SILAR technique Original Research Article
727
Influence of Immersion Period on the Corrosion Behavior of Heat Treated Biomedical Alloy Ti -5Al - 2.5Fe
728
Influence of immobilization protocol on the structure and function of surface bound proteins
729
Influence of immobilization stress on the expression and phosphatase activity of protein phosphatase 2A in the rat brain
730
Influence of Immunobeta® Dietary Supplementation on Egg Production and Some Parameters of Oxidative Stress in Laying Hens
731
Influence of immunomodulatory drugs on the cytotoxicity induced by monoclonal antibody 17-1A and interleukin-2
732
Influence of immunosuppression on the progression of experimental periodontitis and on healthy periodontal tissue: A rat in vivo study
733
Influence of impact angle of solid particles on erosion by slurry jet
734
Influence of impact angle on the interaction between Co55 nanocluster and Cu (0 0 1) substrate: Ionized cluster beam deposition
735
Influence of impact assessment methods in wastewater treatment LCA
736
Influence of impact ionisation detection methods on determination of dust particle flux in space
737
Influence of impact velocity on fragmentation and the energy efficiency of comminution
738
Influence of impedance mismatch effects on measurements of unloaded Q factors of transmission mode dielectric resonators
739
Influence of imperfect interface on the elastic moduli of syntactic foams
740
Influence of imperfect interfaces on bending and vibration of laminated composite shells
741
Influence of imperfections and misalignments of optical elements on the performance of a TGM based beamline on Indus-1
742
Influence of imperfections on the out-of-plane flexural strength of post-tensioned masonry walls
743
Influence of imperfections on the performance of metal foam core sandwich panels
744
Influence of impermeable components on the permeation of aqueous 1-propanol mixtures in hydrophobic pervaporation
745
Influence of Impermeable Elevated Bottom on the Wave Scattering due to Multiple Porous Structures
746
Influence of implant number on the biomechanical behaviour of mandibular implant-retained/supported overdentures: A three-dimensional finite element analysis
747
Influence of implant number on the biomechanical behaviour of mandibular implant-retained/supported overdentures: A three-dimensional finite element analysis
748
Influence of Implant Position on Stress Distribution in Implant-Assisted Distal Extension Removable Partial Dentures: A 3D Finite Element Analysis
749
Influence of implant shape, surface morphology, surgical technique and bone quality on the primary stability of dental implants
750
Influence of implantation induced Ni-doping on structural, optical, and morphological properties of nanocrystalline CdS thin films
751
Influence of implantation of Al, Si, Cr or Mo ions on the oxidation behaviour of TiAl under thermal cycle conditions
752
Influence of implantation of Al, Si, Cr or Mo ions on the oxidation behaviour of TiAl under thermal cycle conditions
753
Influence of implanted Fe on the Kerr effect of Co6Ag94 granular films
754
Influence of important factors on flotation of zinc oxide mineral using cationic, anionic and mixed (cationic/anionic) collectors
755
Influence of imposed oscillatory frequency on mass transfer enhancement of grooved channels for pulsatile flow
756
Influence of impregnated metal on the pyrolysis conversion of biomass constituents
757
Influence of impregnated metal on the pyrolysis conversion of biomass constituents
758
Influence of impregnation ratio on coffee ground activated carbon as landfill leachate adsorbent for removal of total iron and orthophosphate Original Research Article
759
Influence of impregnation solution viscosity and osmolarity on solute uptake during vacuum impregnation of apple cubes (var. Granny Smith) Original Research Article
760
Influence of impregnation with lactic acid on sugar yields from steam pretreatment of sugarcane bagasse and spruce, for bioethanol production
761
Influence of impressed current on the initiation of damage in reinforced mortar due to corrosion of embedded steel
762
Influence of Improved Seedling Rootstocks on Pomological and Organoleptic Traits of Four Apple Cultivars
763
Influence of impurities and catalyst surface characteristics on the oxygen charge transfer reaction in the Pt/YSZ system
764
Influence of impurities and contact scale on the lubricating properties of bovine submaxillary mucin (BSM) films on a hydrophobic surface
765
Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel Original Research Article
766
Influence of impurities in Al2O3 ceramics on hot corrosion resistance against molten salt
767
Influence of impurities on biodiesel production from Jatropha curcas L. by supercritical methyl acetate process
768
Influence of impurities on hydrogen absorption in a metal hydride reactor
769
Influence of impurities on the conductivity of composites in the system (3YSZ)1−x–(MgO)x
770
Influence of impurities on the dynamics and synchronization of coupled map lattices
771
Influence of impurities on the evolution of vacancy-type defects in neutron-irradiated nickel
772
Influence of impurities on the oxygen activity-dependent variation of the oxygen content of a commercial, CaO-doped ZrO2
773
Influence of impurity and recycling on high-β steady-state plasmas sustained by rotating magnetic fields current drive
774
Influence of impurity content and porosity of plasma-sprayed yttria-stabilized zirconia layers on the sintering behaviour
775
Influence of impurity ions and magnetic field on the properties of freshly precipitated calcium carbonate
776
Influence of In composition on exciton confined in self-formed InxGa1−xN/GaN quantum dots
777
Influence of In composition on the photoluminescence emission of In(Ga)As quantum dot bilayers
778
Influence of In content on the electrical conduction behavior of Sm- and In-co-doped proton conductor BaCe0.80-xSm0.20InxO3-δ
779
Influence of In doping on the structural, photo-luminescence and alcohol response characteristics of the SnO2 nanoparticles
780
Influence of in situ formed MoSi2 inclusions on the thermoelectrical properties of an N-type silicon–germanium alloy
781
Influence of in situ formed TiB2 particles on the abrasive wear behaviour of Al–4Cu alloy
782
Influence of in situ formed ZrB2 particles on microstructure and mechanical properties of AA6061 metal matrix composites
783
Influence of in situ nitrogen pressure on crystallization of pulsed laser deposited AlN films
784
Influence of in situ phase formation on microstructural evolution and properties of castable refractories
785
Influence of in situ TiB reinforcements and role of heat treatment on mechanical properties and biocompatibility of Ti-alloys
786
Influence of in vitro gastrointestinal digestion of fruit juices enriched with pine bark extract on intestinal microflora
787
Influence of In0.15Ga0.85As capping layers on the electron and hole energy levels of InAs quantum dots
788
Influence of In2S3 film properties on the behavior of CuInS2/In2S3/ZnO type solar cells
789
Influence of In3+ ions concentration on spectroscopic properties of Ho:LiNbO3 crystals
790
Influence of In3+ ions concentration on the defect structure and light-induced scattering of Ce:Mn:LiNbO3 crystals
791
Influence of Inactivation Treatment of Shipʹs Ballast Water on Corrosion Resistance of Ship Steel Plate Original Research Article
792
Influence of InAs quantum dots on the transport properties of GaAs-based solar cell devices
793
Influence of incidence angle on detecting flooded forests using C-HH synthetic aperture radar data
794
Influence of incidence angle on wear induced by sliding impacts
795
Influence of incident wind turbulence on pressure fluctuations near flat-roof corners
796
Influence of inclination angle of plate on friction, stick-slip and transfer layer—A study of magnesium pin sliding against steel plate
797
Influence of inclination on gas-sparged cross-flow ultrafiltration through an inorganic tubular membrane
798
Influence of inclined Lorentz forces on entropy generation analysis for viscoelastic fluid over a stretching sheet with nonlinear thermal radiation and heat source/sink
799
Influence of inclined magnetic field on peristaltic flow of a Williamson fluid model in an inclined symmetric or asymmetric channel
800
Influence of Included Angle and Sill Slope on Air Entrainment of Triangular Planform Labyrinth Weirs
801
Influence of inclusion content on rolling contact fatigue in a gear steel: Experimental analysis and predictive modelling
802
Influence of inclusion of chestnut in the finishing diet on fatty acid profile of dry-cured ham from Celta pig breed
803
Influence of Inclusion on Crack Initiation in Wheel Rim Original Research Article
804
Influence of inclusion pairs, clusters and stringers on the lower bound of the endurance limit of bearing steels
805
Influence of inclusion shapes on the effective linear elastic properties of hardened cement pastes
806
Influence of inclusion size and strain rate on the interaction between cracking and the matrix–inclusion interface in composites
807
Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime
808
Influence of Income Level and Age on Per Capita Household Solid Waste Generation in Putrajaya, Malaysia
809
Influence of Income on Health Status and Healthcare Utilization in Working Adults: an Illustration of Health among the Working Poor in Japan
810
Influence of Income on Health Status and Healthcare Utilization in Working Adults: an Illustration of Health among the Working Poor in Japan
811
Influence of Income on Health Status and Healthcare Utilization in Working Adults: an Illustration of Health among the Working Poor in Japan
812
Influence of Incorporating B4C Nanoparticles and Pulse Electrodeposition Parameters on the Surface Morphology and Wear Behavior of Nickel Based Nanocomposite Coatings
813
Influence of Incorporating Fluoroapatite Nanobioceramic on the Compressive Strength and Bioactivity of Glass Ionomer Cement
814
Influence of incorporation of Na on p-type CuInS thin films
815
Influence of incorporation or dual cropping of Azolla on methane emission from a flooded alluvial soil planted to rice in eastern India
816
INFLUENCE OF INCREASED TEMPERATURE FROM CEMENT HYDRATION ON ALUMINUM CORROSION PREVENTION WHEN LiNO(3) IS ADDED TO THE CEMENT
817
Influence of Increased Salinity on Physiological Responses of Hydroponic Grown Tomato (Lycopersicon esculentum Mill.)
818
Influence of increasing age on long-term survival after coronary artery bypass grafting
819
INFLUENCE OF INCREASING DIETARY CATION-ANION BALANCE ON THE PERFORMANCE OF LACTATING DAIRY CATTLE
820
Influence of increasing viscosity of the aqueous phase on the short-term stability of protein stabilized emulsions Original Research Article
821
Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites
822
Influence of incubation temperature and time on resistant starch type III formation from autoclaved and acid-hydrolysed cassava starch
823
Influence of incubation temperature on body movements of Atlantic cod (Gadus morhua L.) embryos and on size at hatch
824
Influence of incubation temperature on productivity and quality of Spodoptera litura nucleopolyhedrovirus
825
Influence of indentation depth on the determination of the apparent Youngʹs modulus of bi-layer material: Experiments and numerical simulation
826
Influence of indenter angle on cracking in Si and Ge during nanoindentation Original Research Article
827
Influence of indenter tip roundness on hardness behavior in nanoindentation
828
Influence of indigenous yeasts on the fermentation and volatile profile of plum brandies Original Research Article
829
Influence of indirect ultrasonic vibration on the microstructure and mechanical behavior of Al–Si–Cu alloy
830
Influence of individual Cr–C layer thickness on structural and tribological properties of multilayered Cr–C/a-C:Cr thin films
831
Influence of individual differences in craving and obsessive cocaine thoughts on attentional processes in cocaine abuse patients
832
Influence of individual heat pumps on wind power integration – Energy system investments and operation
833
Influence of individual researchers’ visibility on institutional impact: an example of Prathap’s approach to successive h-indices
834
Influence of individual thermal shock parameters on stress generated in silicon nitride and its prediction
835
Influence of Indole-3-butyric acid on antioxidant defense systems in various tissues of rats at subacute and subchronic exposure
836
Influence of indoline dye and coadsorbate molecules on photovoltaic performance and recombination in dye-sensitized solar cells based on electrodeposited ZnO
837
Influence of indoor air temperature on human thermal comfort, motivation and performance
838
Influence of indoor formaldehyde pollution on respiratory system health in the urban area of Shenyang, China
839
Influence of indoor transport and mixing time scales on the performance of sensor systems for characterizing contaminant releases
840
Influence of induced magnetic field and heat transfer on peristaltic transport of a Carreau fluid
841
Influence of Induced Magnetic Field and Partial Slip on the Peristaltic Flow of a Couple Stress Fluid in an Asymmetric Channel
842
Influence of induced magnetic field on peristaltic flow in an annulus
843
Influence of induced structural changes on thermoluminescence characteristics of γ-ray irradiated PbO–Al2O3–SiO2: Dy3+ glasses
844
Influence of inductive coupling between leads on ground impedance measurements using the fall-of-potential method
845
Influence of inductive coupling between leads on resistivity measurements in multilayer soils
846
Influence of industrial heavy metal pollution on soil free-living nematode population
847
Influence of Industrial, Agricultural and Sewage Water Discharges on Eutrophication of Quttina Lake
848
Influence of industry type on the relationship between international operations and risk
849
Influence of inelastic electron–phonon interaction on the noise power through a molecular junction
850
Influence of inelastic seismic response modeling on regional loss estimation
851
Influence of inelastic subbarrier impurity scattering on the nonresonant tunneling transmission of a quasi-one-dimensional tunneling junction with weak structural disorder
852
Influence of Inelastic Tower Links on Cable-Supported Bridge Response
853
Influence of inert admixtures on diffusion-controlled collapse of a rising bubble
854
Influence of inert admixtures on the rate of mass transfer during bubble collapse in an alternating electric field
855
Influence of inert gas species on the growth of silver and molybdenum films via a magnetron discharge
856
Influence of inert gases on ionized magnetron plasma deposition of carbon nitride thin films
857
Influence of inert particles on the propagation of multidimensional detonation waves
858
Influence of inertia and drag terms on the stability of mixed convection in a vertical porous-medium channel
859
Influence of inertia on intersegment moments of the lower extremity joints
860
Influence of infection rate and migration on extinction of disease in spatial epidemics
861
Influence of infection with Chlamydia trachomatis on pregnancy outcome, infant health and life-long sequelae in infected offspring
862
Influence of infiltration pressure on densification rate and microstructure of pyrocarbon during chemical vapor infiltration
863
Influence of infiltration pressure on the densification rate and microstructure of pyrocarbon during chemical vapor infiltration
864
Influence of inflorescence explant age and 2,4-D incubation period on somatic embryogenesis of date palm
865
Influence of influent tributaries on water quality changes in Lake Mogan, Turkey
866
Influence of Information and Communication Technologies on Decentralization of Organizational Structure
867
Influence of Information Flow on Logistics Management in the Industry 4.0 Era
868
Influence of information related to child physical abuse on professional ratings of adjustment and prognosis
869
Influence of information sources on the adoption of uterine fibroid embolization by interventional radiologists
870
Influence of Informed Buyers in Markets Susceptible to the Lemons Problem
871
Influence of infrared final cooking on polycyclic aromatic hydrocarbon formation in ohmically pre-cooked beef meatballs
872
Influence of Infraspinatus and Subscapularis Pathologies on Supraspinatus Muscle Atrophy - A Retrospective Cohort Study
873
Influence of ingesting a solution of branched-chain amino acids on plasma and muscle concentrations of amino acids during prolonged submaximal exercise
874
Influence of in-grain mesh resolution on the prediction of deformation textures in fcc polycrystals by crystal plasticity FEM Original Research Article
875
Influence of ingredient reformulation to reduce diet crude protein level on productivity, and efficiency of dietary nitrogen use, in early lactation dairy cows
876
Influence of ingredients and chemical components on the quality of Chinese steamed bread
877
Influence of ingredients on the thermo-rheological behaviour of batters containing methylcellulose
878
Influence of Inherent Alkali Content and Surface Area of Biomass Char on its CO2 Gasification Reactivity
879
Influence of inherent minerals and pyrolysis temperature on the yield of pyrolysates of some Pakistani coals
880
Influence of inherent particle characteristics on hopper flow rate
881
Influence of inheritance and pedogenesis on heavy metal distribution in soils of Sicily, Italy
882
Influence of inherited paleotopography and water level rise on the sedimentary infill of Lake Ossa (S Cameroon) inferred by continuous color and bulk organic matter analyses
883
Influence of inherited topography on the Holocene sedimentary evolution of coastal systems: An example from Arno coastal plain (Tuscany, Italy)
884
Influence of inhomogeneous constitutive properties of weld materials on formability of tailor welded blanks
885
Influence of initial and boundary conditions for ozone modeling in very complex terrains: A case study in the northeastern Iberian Peninsula
886
Influence of initial biofilm growth on electrochemical behavior in dual-chambered mediator microbial fuel cell
887
Influence of initial CaCl2 concentration on the phase and morphology of CaCO3 prepared by carbonation
888
Influence of initial chain conformation on the formation of mesoglobule phase in a dilute heteropolymer solution
889
Influence of initial charge conditions on engine performance and emission of a DISI hydrogen-fueled engine under various injection timings
890
Influence of initial chemistry on decomposition of foliar litter in contrasting forest types in British Columbia
891
Influence of initial composition changes caused by UV and gamma irradiation on wave propagation in the Belousov–Zhabotinsky reaction
892
Influence of initial conditions on the mechanical behavior of ion nitrided AISI 4340 steel
893
Influence of initial curing on the properties of concrete containing limestone blended cement
894
Influence of initial distortion on the structural stress in 3 mm thick stiffened panels
895
Influence of initial emulsifier type on microstructural changes occurring in emulsified lipids during in vitro digestion
896
Influence of initial fabric on fractures developed in shear zones in clay
897
Influence of initial geometric imperfections in the lateral buckling problem of thin walled pultruded GFRP I-profiles
898
Influence of initial glucose concentration on nitrile hydratase production in Brevibacterium imperialis CBS 498-74
899
Influence of initial heat generation on dynamic characteristics of transient boiling crisis of water
900
Influence of initial heat treatment of 17-4 PH stainless steel on gas nitriding kinetics
901
Influence of initial heating temperature on the reverse martensitic transformation of Cu–Zn–Al–Mn–Ni alloy
902
Influence of initial heating temperature on the reverse martensitic transformation of Cu–Zn–Al–Mn–Ni alloy
903
Influence of initial iodide concentration on the iodide uptake by the argillite of Tournemire
904
Influence of initial micro-porosity of target on material ejection under nanosecond laser pulses
905
Influence of initial microstructure on creep deformation behaviors and fracture characteristics of Haynes 230 superalloy at 900 °C
906
Influence of Initial Microstructure on Hot Deformation Behavior of Duplex Stainless Steels
907
Influence of initial microstructure on the hot working flow stress of Mg–3Al–1Zn
908
Influence of Initial Microstructure on Warm Deformation Processability and Microstructure of an Ultrahigh Carbon Steel Original Research Article
909
Influence of initial microstructures on effectiveness of training in a FeMnSiCrNi shape memory alloy
910
Influence of Initial Moisture Content on Heat and Moisture Transfer in Firefighters’ Protective Clothing
911
Influence of initial moisture content on the composting of poultry manure with wheat straw
912
Influence of initial oxygen on the formation of thiol layers
913
Influence of initial parent vibrational excitation in promoting two-photon absorption in HOOH and CH3OOH
914
Influence of initial pesticide concentrations and plant population density on dimethomorph toxicity and removal by two duckweed species Original Research Article
915
Influence of initial pH and sulfur dioxide content in must on wine fermentation by immobilized yeast in bacterial cellulose
916
Influence of initial pH on bioleaching of heavy metals from contaminated soil employing indigenous Acidithiobacillus thiooxidans
917
Influence of initial pH on the microstructure of YBa2Cu3O7−x superconducting thin films derived from DEA-aqueous sol–gel method
918
Influence of initial pH on the particle size and fluorescence properties of the nano scale Eu(III) doped yttria Original Research Article
919
Influence of initial pH on the precipitation and crystal morphology of calcium carbonate induced by microbial carbonic anhydrase
920
Influence of initial powder particle size on yttrium stabilized zirconium thin films formed by e-beam technique
921
Influence of initial pressure and temperature on flammability limits of hydrogen–air
922
Influence of initial pressure on frequency characteristics of a rotating truncated circular conical shell
923
Influence of initial pressure on frequency characteristics of a rotating truncated circular conical shell
924
Influence of initial pressure on frequency characteristics of a rotating truncated circular conical shell
925
Influence of initial root length on physiological responses of cherrybark oak and Shumard oak seedlings to field drought conditions
926
Influence of initial spatial layout on seismic behavior of masonry buildings with curved roof systems
927
Influence of initial static stress on the dynamic properties of concrete
928
Influence of Initial Stresses on Stress Intensity Factors at Crack Tips in a Composite Strip
929
Influence of initial stresses on the cast behaviour during squeeze forming processes
930
Influence of initial surface reconstruction on the interface structure of HfO2/GaAs
931
Influence of initial texture on cold deep drawability of Mg–3Al–1Zn alloy sheets
932
Influence of initial texture on formability of aluminum sheet metal by crystal plasticity FE simulation
933
Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures
934
Influence of initial treatments of aluminium on the morphological features of electrochemically formed alumina membranes
935
Influence of Initial Water Saturation on the Residual Saturation of an Organic Liquid in the Vadose Zone
936
Influence of initiator in controlled radical polymerization using nitroxide capping: the case of N,N-dimethylacrylamide.: Synthesis of block copolymers of 4-vinylpyridine and N,N-dimethylacrylamide
937
Influence of initiators on isomerization of normal hexane catalyzed by ionic liquids
938
Influence of initiators on the growth of poly(ethyl 2-cyanoacrylate) nanofibers
939
Influence of Injectable Platelet-Rich Fibrin on ex vivo Leak Pressure of Canine Enterotomy
940
Influence of Injection and Ignition of CNG Fuelled Direct Injection Engine at Constant Speed
941
Influence of injection conditions on field tracer experiments
942
Influence of injection current and temperature on electroluminescence in InGaN/GaN multiple quantum wells
943
Influence of injection gate definition on the flow-front approximation in numerical simulations of mold-filling processes
944
Influence of injection molding parameters on the electrical resistivity of polycarbonate filled with multi-walled carbon nanotubes
945
Influence of injection nitrogen application on spring barley (Hordeum vulgare L.) lodging
946
Influence of injection parameters and mold materials on mechanical properties of ABS in plastic injection molding
947
Influence of injection parameters on defects formation in die casting Al12Si1,3Cu alloy: Experimental results and numeric simulation
948
Influence of injection parameters on the formation of blush in injection moulding of PVC Review Article
949
Influence of injection pressure on droplet atomization and auto-ignition of dimethyl ether (DME) at elevated pressure
950
Influence of injection site, microvascular pressureand ultrasound variables on microbubble-mediated delivery of microspheres to muscle
951
Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine
952
Influence of injection timing on the exhaust emissions of a dual-fuel CI engine
953
Influence of injector hole number on the performance and emissions of a DI diesel engine fueled with biodiesel–diesel fuel blends
954
Influence of injector technology on injection and combustion development – Part 1: Hydraulic characterization
955
Influence of injector technology on injection and combustion development – Part 2: Combustion analysis
956
INFLUENCE OF INK LAYERS ON THE QUALITY OF INK JET PRINTED TEXTILE MATERIALS
957
Influence of ink preparation with the untreated and the burned Pt/C catalysts for proton exchange membrane fuel cells
958
Influence of Inlays/Onlays and Their Material on Stress Distribution in Mandibular Molars: Finite Element Analysis
959
Influence of inlet flow rate, pH, and beads mill operating condition on separation performance of sub-micron particles by electrical hydrocyclone
960
Influence of inlet positions on the flow behavior inside a photoreactor using radiotracers and colored tracer investigations
961
Influence of inlet pressure conditions on supersonic turbulent mixing layers
962
Influence of inlet shear on the 3-D flow past a square cylinder at moderate Reynolds number
963
Influence of Inlet Vane and Wrap Angles on Cavitation Behavior of a Centrifugal Pump
964
Influence of in-medium nucleon–nucleon cross section on the isoscaling parameter α Original Research Article
965
Influence of inner diameter and position of phase adjuster on the performance of the thermo-acoustic Stirling engine
966
Influence of inner heat sources on annual heating and cooling energy consumption and its relative variation rates (RVRs)
967
Influence of innocuous cervical vertebral movement on the efferent innervation of the adrenal gland in the rat
968
Influence of inoculating forage with lactic acid bacterial strains that produce ferulate esterase on ensilage and ruminal degradation of fiber
969
Influence of inoculation levels and processing parameters on the survival of Campylobacter jejuni in German style fermented turkey sausages
970
Influence of Inoculation Method and Spawn Level on Biological Efficiency of Pleurotus ostreatus
971
Influence of inoculation time of an autochthonous selected malolactic bacterium on volatile and sensory profile of Tempranillo and Merlot wines
972
Influence of inoculation with arbuscular mycorrhizal fungi on stable isotopes of nitrogen in Phaseolus vulgaris
973
Influence of inoculation with plant growth promoting rhizobacteria (PGPR) on tomato plant growth and nematode reproduction under greenhouse conditions
974
Influence of Inoculation with Some Bradyrhizobium Strains on Yield Attributes, Seed Proximate Composition and Minerals Content of Guar (Cyamopsis Teteragonolopa L.) Grown in Sudan
975
Influence of inoculum age and concentration in Spirulina platensis cultivation Original Research Article
976
Influence of inoculum concentration, leaf age, temperature, and duration of leaf wetness on Septoria blight of parsley
977
Influence of inoculum density and aeration volume on biomass and bioactive compound production in bulb-type bubble bioreactor cultures of Eleutherococcus koreanum Nakai
978
Influence of Inoculum Density of Races 0 and 5 of Fusarium oxysporum f. sp. ciceris on Development of Fusarium Wilt in Chickpea Cultivars
979
Influence of inoculum level and acidic marination on inactivation of Escherichia coli O157:H7 during drying and storage of beef jerky Original Research Article
980
Influence of inoculum on performance of anaerobic reactors for treating municipal solid waste
981
Influence of inoculum source in a gas production method
982
Influence of inoculum source on gas production profiles
983
Influence of Inorganic Additives on the Performance of Polysulfone Ultrafiltration Membrane
984
Influence of inorganic admixtures on the 11 إ-tobermorite formation prepared from steel slags: XRD and FTIR analysis
985
Influence of inorganic and organic fertilization on soil microbial biomass, metabolic quotient and heavy metal bioavailability
986
Influence of Inorganic and Organic Selenium Sources on Broiler Performance and Meat Quality
987
Influence of inorganic anions and organic additives on photocatalytic degradation of methyl orange with supported polyoxometalates as photocatalyst
988
Influence of inorganic complexes on the transport of trace metals through permeation liquid membrane Original Research Article
989
Influence of inorganic electrolytes on the retention of polyethyleneglycol by a nanofiltration ceramic membrane
990
Influence of inorganic fertilizers and organic amendments on soil organic matter and soil microbial properties under tropical conditions
991
Influence of inorganic fillers on the compaction behaviour of porous polymer based membranes
992
Influence of inorganic mobile phase additives on the retention, efficiency and peak symmetry of protonated basic compounds in reversed-phase liquid chromatography
993
Influence of Inorganic Nitrogen and pH on the Elongation of Maize Seminal Roots
994
INFLUENCE OF INORGANIC NITROGEN, PHOSPHORUSAND BIO-FERTILIZERS ON GROWTH, YIELD AND YIELDCOMPONENTS AND NUTRIENT UPTAKE OF CUCUMBER(Cucumis sativus L.)
995
Influence of inorganic pigments on the fluidity of cement mortars
996
Influence of inorganic pigments’ addition on the performance of coloured SCC
997
Influence of inorganic pyrophosphate on the kinetics of muscle pyruvate kinase: a simple nonallosteric feedback model
998
Influence of Inorganic Salts on Soils Liquid and Plastic Limits
999
Influence of inorganic salts on the primary pyrolysis products of cellulose
1000
Influence of inorganic scalants and natural organic matter on nanofiltration membrane fouling
