ليست عنوان مقالات لاتين Microstructural analyses of a highly conductive Nb-doped SrTiO3 film Original Research Article Microstructural evolution and hardening parameters

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Microstructural analyses of a highly conductive Nb-doped SrTiO3 film Original Research Article

2

Microstructural analyses of a Middle Pliocene till from the James Bay Lowlands, Canada—evidence of “potential” fast ice streaming

3

Microstructural analyses of B4C–CeO2 and B4C–La2O3 ceramics

4

Microstructural analyses of phosphogypsum generated by Brazilian fertilizer industries

5

Microstructural analyses of the nanoparticles obtained after laser irradiation of Ti and W in ethanol

6

Microstructural analysis and growth mechanism of single-step aluminum–titanium diffusion coatings on a nickel-based substrate

7

Microstructural analysis and mechanical characterization of aluminum matrix nanocomposites reinforced with uncoated and Cu-coated alumina particles

8

MICROSTRUCTURAL ANALYSIS AND MECHANICAL PROPERTIES OF LM6 ALLOY PROCESSED BY COOLING SLOPE CASTING

9

Microstructural analysis and P–T conditions of the Azul megashear zone, Tandilia, Buenos Aires province, Argentina

10

Microstructural analysis and structure-property relationship of poly(glycolide-co-1,3-trimethylene carbonate)

11

Microstructural analysis and XPS investigation of nodular oxides formed on Zircaloy-4

12

Microstructural analysis in asymmetric and un-balanced composite cylinders damaged by internal pressure

13

Microstructural analysis in epitaxial zirconia layers

14

Microstructural analysis of 9% Cr martensitic steels containing 0.5 at.% helium

15

Microstructural analysis of a single pass 2.25% Cr–1.0% Mo steel weld metal with different manganese contents

16

Microstructural analysis of a subhorizontal gold-quartz vein deposit at Donalda, Abitibi greenstone belt, Canada: Implications for hydrodynamic regime and fluid-structural relationship

17

Microstructural analysis of aerated cement pastes with fly ash, Metakaolin and Sepiolite additions

18

Microstructural analysis of AISI 304 bars welded with high speed pulsed discharges

19

Microstructural analysis of an HT9 fuel assembly duct irradiated in FFTF to 155 dpa at 443 °C

20

Microstructural analysis of anhydrite rocks from the Triassic Evaporites, Umbria-Marche Apennines, Central Italy: An insight into deformation mechanisms and possible slip systems

21

Microstructural analysis of as-processed U–10 wt.%Mo monolithic fuel plate in AA6061 matrix with Zr diffusion barrier

22

Microstructural analysis of atomistic models of Si-rich amorphous silicon–germanium alloys

23

Microstructural analysis of AU/NI multilayers interfaces by SAXS and STM

24

Microstructural analysis of beryllium samples irradiated at high temperature

25

Microstructural analysis of candidate steels pre-selected for new advanced reactor systems

26

Microstructural analysis of carbon films obtained from C60 fullerene ion beams

27

Microstructural analysis of carbonitrided austenitic steels

28

Microstructural analysis of catalyst/catalyst support interfaces of PEFC electrocatalysts

29

Microstructural analysis of deformation in neutron-irradiated fcc materials

30

Microstructural analysis of doped-strontium cerate thin film membranes fabricated via polymer precursor technique

31

Microstructural analysis of friction stir welded ferritic stainless steel

32

Microstructural analysis of fusion and heat affected zones in electron beam welded ALLVAC® 718PLUS™ superalloy

33

Microstructural analysis of Ga2S3–2MCl (M = K, Rb, Cs) glasses using Raman scattering

34

Microstructural analysis of glass-steel interface

35

Microstructural analysis of hard amorphous carbon films deposited with high-energy ion beams

36

Microstructural analysis of heat-resistant welded pipes

37

Microstructural analysis of hot-rolled, low-carbon steel strips

38

Microstructural analysis of in situ mesophase transformation in the fabrication of carbon–carbon composites Original Research Article

39

Microstructural analysis of interfacial reaction between molten aluminium and solid iron

40

Microstructural analysis of ion-irradiation-induced hardening in inconel 718

41

Microstructural analysis of La2/3 − xLi3xTiO3 single crystals and quenched samples observed by high resolution transmission electron microscopy

42

Microstructural analysis of laser weld fusion zone in Haynes 282 superalloy

43

Microstructural analysis of low Ni content Zn alloy electrodeposited under applied magnetic field

44

Microstructural analysis of martensite constituents in quenching and partitioning steels

45

Microstructural analysis of mechanically tested reduced-activation ferritic/martensitic steels

46

Microstructural analysis of MTR fuel plates damaged by a coolant flow blockage

47

Microstructural analysis of nanoporous paracrystalline atomistic models of amorphous silicon

48

Microstructural analysis of nanostructured amorphous silicon–germanium alloys: Numerical modeling

49

Microstructural analysis of new lead–acid electrode alloys

50

Microstructural analysis of paracrystalline atomistic models of amorphous silicon

51

Microstructural analysis of plain and reinforced mortars under chloride-induced deterioration

52

Microstructural analysis of poly(glycidyl methacrylate) by 1H and 13C NMR spectroscopy

53

Microstructural analysis of poly(vinylidene fluoride) using benzene derivative pyrolysis products

54

Microstructural analysis of poly(vinylidene fluoride) using benzene derivative pyrolysis products

55

Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach

56

Micro-structural analysis of self-accommodating martensites in Cu–11.92 wt%Al–3.78 wt%Ni shape memory alloy

57

Microstructural analysis of single crystal SiC prepared by novel liquid phase epitaxy

58

Microstructural analysis of the 〈111〉 and 〈110〉 nickel single crystals subjected to severe plastic deformation by hydroextrusion

59

Microstructural analysis of the anode in gas metal arc welding (GMAW)

60

Microstructural analysis of the bond mechanism between polyolefin fibers and cement pastes

61

Microstructural analysis of the color-generating mechanism in Ru ware, modern copies and its differentiation with Jun ware

62

Microstructural analysis of the render of the Bolinder palace in Stockholm

63

Microstructural analysis of the stress-induced ε martensite in a Fe–Mn–Si–Cr–Ni shape memory alloy: Part I—calculated description of the microstructure

64

Microstructural analysis of the stress-induced ε martensite in a Fe–Mn–Si–Cr–Ni shape memory alloy: Part I—calculated description of the microstructure

65

Microstructural analysis of the stress-induced ε martensite in a Fe–Mn–Si–Cr–Ni shape memory alloy: Part II: Transformation reversibility

66

Microstructural analysis of the stress-induced ε martensite in a Fe–Mn–Si–Cr–Ni shape memory alloy: Part II: Transformation reversibility

67

Microstructural analysis of the thermodynamically controlled hydride phases grown in the ZrNi-H2 system

68

Microstructural analysis of the thermodynamically controlled hydride phases grown in the ZrNi-H2 system

69

Microstructural analysis of the thermodynamically controlled hydride phases grown in the ZrNi-H2 system

70

Microstructural analysis of TiC reinforced ferrous surface composites processed by accelerated electron beam irradiation

71

Microstructural analysis of YSZ and YSZ/Al2O3 plasma sprayed thermal barrier coatings after high temperature oxidation

72

Microstructural analysis on a creep resistant martensitic 9–12% Cr steel using the EBSD method

73

Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti–6Al–4V alloy

74

Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti–6Al–4V alloy

75

Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels

76

Microstructural analysis on helium retention of ion-irradiated and annealed tungsten foils

77

Microstructural analysis on JLF-1 steel tested by fatigue deformation

78

Microstructural analytical techniques for snow compacted by an aircraft tire

79

Microstructural and abrasive characteristics of high carbon Fe–Cr–C hardfacing alloy

80

Microstructural and alloy influence on the low-temperature strengthening behavior of commercial steels used as plates

81

Microstructural and analytical study of thermally sprayed WC-Co coatings in connection with their wear resistance

82

Microstructural and analytical study of thermally sprayed WC-Co coatings in connection with their wear resistance

83

Microstructural and atomic arrangement studies in Fe (110)/GaAs (110) heterostructures Original Research Article

84

Microstructural and bulk property changes in hardened cement paste during the first drying process

85

Microstructural and chemical analysis of nanoscale particles in rapidly solidified AlVFe

86

Microstructural and chemical analysis of nanoscale particles in rapidly solidified AlVFe

87

Microstructural and chemical analysis performed by HRTEM and EDS on YBa2Cu3O7−x/Ag films irradiated with electrons

88

Microstructural and chemical analysis performed by HRTEM and EDS on YBa2Cu3O7-x/Ag films irradiated with electrons

89

Microstructural and chemical aspects of working-temperature aged Ca-doped CeO2

90

Microstructural and chemical changes at the Ni/YSZ interface

91

Microstructural and chemical effects of wet/dry cycling on pulp fiber–cement composites

92

Microstructural and chemical evolution near anode triple phase boundary in Ni/YSZ solid oxide fuel cells

93

Microstructural and chemical variation of TiO2 electrodes in DSSCs after ethanol vapour treatment

94

Microstructural and CO2 chemisorption analyses of Li4SiO4: Effect of surface modification by the ball milling process

95

Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling

96

Microstructural and compositional change of NaOH-activated high calcium fly ash by incorporating Na-aluminate and co-existence of geopolymeric gel and C–S–H(I)

97

Microstructural and compositional characterisation of the pyrocarbon interlayer in SiC coated low density carbon/carbon composites

98

Microstructural and compositional characteristics of GaN films grown on a ZnO-buffered Si (111) wafer

99

Microstructural and compositional characterization of a new silicon carbide nanocables using scanning transmission electron microscopy

100

Microstructural and compositional characterization of terbium-doped Nd–Fe–B sintered magnets

101

Microstructural and compositional investigations of surface-nitrided silicon carbide ceramics

102

Microstructural and compositional studies of liquid-phase deposition derived PbTiO3 thin films on LaNiO3 substrates

103

Microstructural and compositional study of a bulk Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystal grown from a BaTiO3 seed

104

Microstructural and conductive properties of BaRuO3 thin films

105

Microstructural and corrosion behavior of Al/SiC metal matrix composites

106

Microstructural and corrosion characteristics of laser surface-melted plastics mold steels

107

Microstructural and corrosion characteristics of tantalum coatings prepared by molten salt electrodeposition

108

Microstructural and crystallographic aspects of conventional and asymmetric rolling processes Original Research Article

109

Microstructural and crystallographic characteristics of interpenetrating and non-interpenetrating multiply twinned nanostructure in a Ni–Mn–Ga ferromagnetic shape memory alloy Original Research Article

110

Microstructural and crystallographic features of ausferrite in as-cast gray iron

111

Microstructural and crystallographical study of carbides in 30wt.%Cr cast irons

112

Microstructural and crystallographical study of carbides in 30wt.%Cr cast irons Original Research Article

113

Microstructural and defect population change in electron beam irradiated Ge:SiO2 MCVD glasses in the conditions of refractive index change writing

114

Micro-structural and dielectric properties of porous TiO2 films synthesized on titanium alloys by micro-arc discharge oxidization

115

Microstructural and diffusional aspects of the growth of alumina scales on β-NiAl

116

Microstructural and diffusional aspects of the growth of alumina scales on β-NiAl

117

Microstructural and DSC studies of Alloy 718™ Plus

118

Microstructural and elastic behaviour of OCMG-processed NdBaCuO materials

119

Microstructural and elastic behaviour of OCMG-processed NdBaCuO materials

120

Microstructural and elastic properties of silicon-germanium-carbon alloys

121

Microstructural and electrical behavior of Bi4V2−xCuxO11−δ (0 ≤ x ≤ 0.4)

122

Microstructural and electrical changes in nickel manganite powder induced by mechanical activation

123

Microstructural and electrical characterisation of melt grown high temperature protonic conductors

124

Microstructural and electrical characterisation of PZT thick films on LTCC substrates

125

Microstructural and electrical characteristics of Y2O3-doped ZnO–Bi2O3-based varistor ceramics

126

Microstructural and electrical characterization of bulk YBa2Cu3O7−δ ceramics

127

Microstructural and electrical characterization of Er and Eu implanted gallium nitride

128

Microstructural and electrical characterization of gas cluster ion beam-smoothed YBCO films

129

Microstructural and electrical characterization of Joule heat welds in ultrathin Pt wires

130

Microstructural and electrical characterization of La-doped PZT ceramics prepared by a precursor route

131

Microstructural and electrical characterization of Nb-doped SrTiO3–YSZ composites for solid oxide cell electrodes

132

Microstructural and electrical characterizations of chemically prepared Ce0.8Gd0.2− x(Ag, Sr)xO1.9 (0 ≤ x ≤ 0.02)

133

Microstructural and electrical features of lithium Ce-monazite

134

Microstructural and electrical properties of (Sr,Ba)Nb2O6 thin films grown by pulsed laser deposition

135

Microstructural and electrical properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 (PMN–PT) epitaxial films grown on Si substrates

136

Microstructural and electrical properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 (PMN–PT) epitaxial films grown on Si substrates

137

Microstructural and electrical properties of different-sized aluminum-alloyed contacts and their layer system on silicon surfaces

138

Microstructural and electrical properties of Ga2O3 nanowires grown at various temperatures by vapor–liquid–solid technique

139

Microstructural and electrical properties of MgO thin films grown on p-GaAs (100) substrates

140

Microstructural and electrical properties of MgO thin films grown on p-InP (100) substrates at low temperature

141

Microstructural and electrical properties of nanocomposite PZT/Pt thin films made by pulsed laser deposition

142

Microstructural and electrical properties of Pb(Zr0.52Ti0.48)O3 films grown on p-InSb (111) substrates at low temperature Original Research Article

143

Microstructural and electrical resistance analysis of laser-processed SiC substrates for wide bandgap semiconductor materials

144

Microstructural and electrical studies of nitrogen doped diamond thin films grown by microwave plasma CVD

145

Microstructural and electrochemical characterization of a thin-section dissimilar stainless steel weld joint

146

Microstructural and electrochemical characterization of RuO2/CNT composites synthesized in supercritical diethyl amine Original Research Article

147

Microstructural and electrochemical characterizations of an electrolyte with an apatite structure, La9Sr1Si6O26.5

148

Microstructural and electrochemical properties of lithium manganese oxide thin films grown by pulsed laser deposition

149

Microstructural and electrochemical properties of vertically aligned few layered graphene (FLG) nanoflakes and their application in methanol oxidation

150

Microstructural and electrochemical study of La0.5Li0.5TiO3

151

Microstructural and electrochromic characteristics of electrodeposited and annealed WO3 films

152

Microstructural and electrochromic properties of tungsten oxide thin films produced by surfactant mediated electrodeposition

153

Microstructural and experimental constraints on the rheology of partially molten gabbro beneath oceanic spreading centers

154

Microstructural and fracture toughness characterisation of a high-strength FeCrMoVC alloy manufactured by rapid solidification

155

Microstructural and gas separation properties of CVD modified mesoporous γ-alumina membranes

156

Microstructural and geochemical evolution of paste tailings in surface disposal conditions

157

Microstructural and hardness investigation of hot-work tool steels by laser surface treatment

158

Microstructural and high temperature deformation characterization of Ti–45Al–3Nb–(Cr, Mn, Mo, Sc) alloy

159

Microstructural and high-temperature mechanical characteristics of nickel oxide/zirconia composites for solid oxide fuel cells

160

Microstructural and in vitro characterisation of high-velocity suspension flame sprayed (HVSFS) bioactive glass coatings

161

Microstructural and interband transition properties in CdTe quantum dots grown on ZnTe buffer layers by using atomic layer epitaxy

162

Microstructural and interband transition studies of multiple stacked layers of Si-doped InAs self-assembled quantum dot arrays inserted into GaAs barriers

163

Microstructural and interfacial properties of the Ru/p-InP(100) heterostructures

164

Microstructural and lattice parameter study of as-cast and rapidly solidified NiAl intermetallic alloys with Cu additions

165

Microstructural and loading characteristics of diesel aggregate cakes

166

Microstructural and magnetic behavior of mixed Ni–Zn–Co and Ni–Zn–Mn ferrites

167

Microstructural and magnetic behavior of nanostructured soft alloys prepared by mechanical grinding and gas atomization

168

Microstructural and magnetic characterization of iron precipitation in Ni–Fe–Al alloys

169

Microstructural and magnetic properties of Ni–Ce nanocomposite particles

170

Microstructural and magnetic properties of textured GdBa2Cu3Oy/Gd2BaCuO5 composites fabricated from Gd2BaCuO5 preforms

171

Microstructural and magnetic properties of textured GdBa2Cu3Oy/Gd2BaCuO5 composites fabricated from Gd2BaCuO5 preforms

172

Microstructural and magnetic properties of Zn substituted Li–Mg ferrites

173

Microstructural and magnetic studies of cast and annealed Nd and PrFeCoBZr alloys and HDDR materials

174

Microstructural and magnetic studies of granular GdW films

175

Microstructural and magnetic studies of granular GdW films

176

Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites

177

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

178

Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy

179

Microstructural and mechanical behavior of 4.5Cr–2W–0.25V–0.1C steel

180

Microstructural and mechanical behavior of highly deformed Al–Sn alloys

181

Microstructural and mechanical behavior of Mg/Mg2Si composite fabricated by a directional solidification system

182

Microstructural and mechanical behavior of multi-walled carbon nanotubes reinforced Al–Mg–Si alloy composites in aging treatment

183

Microstructural and mechanical behavior study of suction cast Nb–Si binary alloys

184

Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes

185

Microstructural and mechanical behaviour of polyamide fibre-reinforced plaster composites

186

Microstructural and mechanical changes by chemical ageing of glazed ceramic surfaces

187

Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion

188

Microstructural and mechanical characterisation of a Ti6Al4V/TiC/10p composite processed by the BE-CHIP method

189

Microstructural and mechanical characterisation of an Al-21.8 wt.% Ge brazing alloy with a globular morphology of the primary Al-rich phase

190

Microstructural and mechanical characterisation of an Al-21.8 wt.% Ge brazing alloy with a globular morphology of the primary Al-rich phase

191

Microstructural and mechanical characterisation of biomorphic SiC ceramics synthesised from coir fibreboard preform

192

Microstructural and mechanical characterisation of WE54–SiC composites

193

Microstructural and mechanical characteristics of AA7020-O Al plates joined by friction stir welding

194

Microstructural and mechanical characteristics of EUROFER’97 processed by equal channel angular pressing

195

Microstructural and mechanical characteristics of in situ metal matrix composites

196

Microstructural and mechanical characteristics of laser coatings

197

Microstructural and mechanical characteristics of laser welding of Ti6Al4V and lead metal

198

Microstructural and mechanical characteristics of porous iron prepared by powder metallurgy

199

Microstructural and mechanical characteristics of recycled hard metals for cutting tools

200

Microstructural and mechanical characteristics of SiC/SiC composites with modified-RS process

201

Microstructural and mechanical characterization of a superplastic 6xxx aluminum alloy

202

Microstructural and mechanical characterization of a superplastic 6xxx aluminum alloy

203

Microstructural and mechanical characterization of Al–15%Mg2Si composite containing chromium

204

Microstructural and mechanical characterization of Al–MWCNT composites produced by mechanical milling

205

Microstructural and mechanical characterization of Al–Zn–Si nanocomposites

206

Microstructural and mechanical characterization of biomedical Ti–Nb–Zr(–Ta) alloys

207

Microstructural and mechanical characterization of chitosan scaffolds reinforced by calcium phosphates

208

Microstructural and mechanical characterization of C–Mn–Al–Si cold-rolled TRIP-aided steel

209

Microstructural and mechanical characterization of diffusion bonded hybrid joints

210

Microstructural and mechanical characterization of electron beam welded Al-alloy 7020

211

Microstructural and mechanical characterization of fly ash cenosphere/metakaolin-based geopolymeric composites

212

Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles

213

Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles

214

Microstructural and mechanical characterization of in situ TiC and (Ti,W)C-reinforced high manganese austenitic steel matrix composites

215

Microstructural and mechanical characterization of iron samples sintered in DC plasma

216

Microstructural and mechanical characterization of laser beam welded AA6056 Al-alloy

217

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system Original Research Article

218

Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF

219

Microstructural and Mechanical Characterization of Postweld Heat-Treated Thermite Weld in Rails

220

Microstructural and mechanical characterization of radial friction welded supermartensitic stainless steel joints

221

Microstructural and mechanical characterization of sol gel-derived Si–O–C glasses

222

Microstructural and mechanical characterization of the Si3N4/Si3N4 joint brazed using Au–Ni–V filler alloys

223

Microstructural and mechanical characterization of thermal sprayed nickel–alumina composite coatings

224

Microstructural and mechanical characterization of titanium nitride produced by S.H.S.

225

Microstructural and mechanical characterization of various modified 7XXX series spray formed alloys

226

Microstructural and mechanical characterization of W/SiC bonding for structural material in fusion

227

Microstructural and mechanical characterizations of a novel HVOF-sprayed WC-Co coating deposited from electroless Ni–P coated WC-12Co powders

228

Microstructural and mechanical comparison of Ti + 15%TiCp composites prepared by free sintering, HIP and extrusion

229

Microstructural and mechanical consequences of thermal cycles on a high zirconia fuse-cast refractory

230

Microstructural and mechanical differences between digested collagen–fibrin co-gels and pure collagen and fibrin gels

231

Microstructural and mechanical evaluation of a Cu-based active braze alloy to join silicon nitride ceramics

232

Microstructural and mechanical evaluation of porous biomorphic silicon carbide for high temperature filtering applications

233

Microstructural and mechanical factors influencing high pH stress corrosion cracking susceptibility of low carbon line pipe steel

234

Microstructural and mechanical investigation of hydroxyapatite–zirconia nanocomposites prepared by spark plasma sintering

235

Microstructural and mechanical investigations of tungsten carbide films deposited by reactive RF sputtering

236

Microstructural and mechanical parameters determining the susceptibility of porous building stones to salt decay

237

Microstructural and mechanical properties evolution of magnesium AZ61 alloy processed through a combination of extrusion and thermomechanical processes

238

Microstructural and mechanical properties evolutions of plasma transferred arc deposited Norem02 hardfacing alloy at high temperature

239

Microstructural and mechanical properties of Al 7075 alloy processed by Equal Channel Angular Pressing

240

Microstructural and mechanical properties of AZ31 magnesium alloy with Cr addition and CO2 incorporation during processing

241

Microstructural and mechanical properties of camel longissimus dorsi muscle during roasting, braising and microwave heating

242

Microstructural and mechanical properties of commercially pure aluminum subjected to Dual Equal Channel Lateral Extrusion

243

Microstructural and mechanical properties of Cu–Ti plates bonded through explosive welding process

244

Microstructural and mechanical properties of dual Ti3AlC2–Ti2AlC reinforced TiAl composites fabricated by reaction hot pressing

245

Microstructural and mechanical properties of filler-added coal-tar pitch-based C/C composites: the damage and fracture process in correlation with AE waveform parameters Original Research Article

246

Microstructural and mechanical properties of friction stir welded Cu–30Zn brass alloy at various feed speeds: Influence of stir bands

247

Microstructural and mechanical properties of graded and multilayered AlxTi1-xN/CrN coatings synthesized by a cathodic-arc deposition process

248

Microstructural and mechanical properties of jointed ZrO2/Ti–6Al–4V alloy using Ti33Zr17Cu50 amorphous brazing filler

249

Microstructural and mechanical properties of marine soft clay stabilized by lime-activated ground granulated blastfurnace slag

250

Microstructural and mechanical properties of nanocrystalline (Al+12.5 at.%Cu)3Zr alloys synthesized by planetary ball milling and spark plasma sintering

251

Microstructural and mechanical properties of nanocrystalline spinel and related composites

252

Microstructural and mechanical properties of nickel-base plasma sprayed coatings on steel and cast iron substrates

253

Microstructural and mechanical properties of silica–PEPEG polymer composite xerogels Original Research Article

254

Microstructural and mechanical properties of Sn–Ag–Cu lead-free solders with minor addition of Ni and/or Co

255

Microstructural and mechanical properties of sputter deposited TiN/SiNx multilayer thin films

256

Microstructural and mechanical properties of titanium particulate reinforced magnesium composite materials

257

Microstructural and mechanical property changes in HK40 reformer tubes after long term use

258

Microstructural and mechanical property changes in the Ta-base T-111 alloy following thermal aging

259

Microstructural and mechanical property changes with aging of Mo–41Re and Mo–47.5Re alloys

260

Microstructural and mechanical property characterization of Er modified Al–Mg–Mn alloy Tungsten Inert Gas welds

261

Microstructural and mechanical study of zirconia-hydroxyapatite (ZH) composite ceramics for biomedical applications

262

Micro-structural and metal leachate analysis of concrete made with fungal treated waste foundry sand

263

Microstructural and microchemical analysis of thecreep damage in mullite tested in flexure

264

Microstructural and microchemical development of simple and Pt-modified aluminide diffusion coatings during long term oxidation at 1050 °C

265

Microstructural and microhardness characteristics of induction melted nickel-based alloys

266

Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation

267

Microstructural and micro-mechanical properties of Mo–Si–B alloyed with Y and La

268

Microstructural and microtextural analysis of InterPulse GTCAW welds in Cp-Ti and Ti–6Al–4V

269

Microstructural and microtextural investigations of boron nitride deposited from BCl3–NH3–H2 gas mixtures

270

Microstructural and molecular level characterisation of plastic crystal phases of pyrrolidinium trifluoromethanesulfonyl salts

271

Microstructural and morphological analysis of nanostructured alumina particles synthesized at low temperature via aerosol route

272

Microstructural and morphological analysis of pure and Ce-doped tin dioxide nanoparticles

273

Microstructural and Nonlinear Electrical Properties of ZnO Ceramics with Small Amount of MnO2 Dopant

274

Microstructural and optical characterization of germanium:indium tin oxide (Ge:ITO) nanocomposite films

275

Microstructural and optical characterization of PZT nanopowder prepared at low temperature

276

Microstructural and optical features of a Eu-monazite

277

Microstructural and optical investigations on sonochemically synthesized Cu doped ZnO nanobricks

278

Microstructural and optical properties of CuIn3Te5 thin films for solar cells

279

Microstructural and optical properties of europium-doped zinc oxide nanowires Original Research Article

280

Microstructural and optical properties of multiple closely stacked InAs/GaAs self-assembled quantum dot arrays Original Research Article

281

Microstructural and optical properties of nanocrystalline ZnO deposited onto vertically aligned carbon nanotubes by physical vapor deposition

282

Micro-structural and optical properties of reactive magnetron sputtered Aluminum Nitride (AlN) nanostructured films

283

Microstructural and optical properties of strain compensated InxGa1−xAs/InyAl1−yAs multiple quantum wells Original Research Article

284

Microstructural and optical properties of ZnO nanowires synthesized on Si substrates without a catalyst

285

Microstructural and optical properties of ZnO thin films grown on InSb (111) substrates

286

Microstructural and optical properties of ZnS:Cu nanocrystals prepared by an ion complex transformation method

287

Microstructural and optical studies of multiply stacked CdSe/ZnSe quantum-dot structures with a large ZnSe spacer thickness

288

Microstructural and phase configurational effects determining water content: Dielectric relationships of aggregated porous media

289

Microstructural and phase equilibria study in the Ni–Al–Cr–W system at 1173 and 1273 K

290

Microstructural and phase transformations during sintering of a phillipsite rich zeolitic tuff

291

Microstructural and photo luminescence studies on hydrothermally synthesized Ce-doped barium titanate nanocrystals

292

Microstructural and photocatalytic properties distribution of TiO2 coatings reactively sputtered as a function of the substrate position relatively to the Ti target

293

Microstructural and photocatalytic properties of sol–gel-derived vanadium-doped mesoporous titanium dioxide nanoparticles

294

Microstructural and photocatatlytic properties of Eu-doped mesporous titanium dioxide nanopaticles by sol–gel method

295

Microstructural and photoluminescent characterization of one-dimensional ZnO nanostructures prepared by catalyst-assisted vapour–liquid–solid technique

296

Microstructural and physical properties of silica aerogels based on oil shale ash

297

Microstructural and physical properties of the ambient pressure dried hydrophobic silica aerogels with various solvent mixtures

298

Microstructural and physical properties of titanium nitride coatings produced by CVD process

299

Microstructural and physical properties of titanium nitride coatings produced by CVD process

300

Microstructural and physicochemical properties of heat-moisture treated waxy and normal starches Original Research Article

301

Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition

302

Microstructural and processing factors influencing the formation of annealing twins

303

Microstructural and reliability in grinding of silicon nitride

304

Microstructural and reliability in grinding of silicon nitride

305

Microstructural and reliability in grinding of silicon nitride

306

Micro-structural and rheological characteristics of SBS-asphalt blends during their manufacturing

307

Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials

308

Microstructural and seismic properties of the upper mantle underneath a rifted continental terrane (Baja California): An example of sub-crustal mechanical asthenosphere?

309

Microstructural and spectroscopic study of sol–gel derived Nd-doped silica glasses

310

Microstructural and strength evolutions of geopolymer composite reinforced by resin exposed to elevated temperature

311

Microstructural and surface characterization of Ti–6Al–4V alloys after fretting fatigue

312

Microstructural and surface characterization of Ti–6Al–4V alloys after fretting fatigue

313

Microstructural and surface property variations due to the amorphous region formed by thermal annealing in Al-doped ZnO thin films grown on n-Si (1 0 0) substrates

314

Micro-structural and temperature dependent electrical characterization of Ni/GaN Schottky barrier diodes

315

Microstructural and textural characterization of a hot-rolled IF steel

316

Microstructural and textural characterization of copper processed by ECAE

317

Microstructural and textural development in an extra low carbon steel during warm rolling

318

Microstructural and textural development in an extra low carbon steel during warm rolling

319

Microstructural and textural developments during Zircaloy-4 fuel tube fabrication

320

Microstructural and textural evolution of AZ61 magnesium alloy sheet during bidirectional cyclic bending

321

Microstructural and texture changes in severely deformed aluminum alloys

322

Microstructural and texture development in direct laser fabricated IN718

323

Microstructural and texture studies of gas-nitrided Cr-coated low-alloy high-carbon steel

324

Microstructural and thermal processing effects on adding 1 and 3 w/o Ti to a powder metallurgy processed quaternary Ni–Cr–Fe–Al alloy

325

Microstructural and thermal properties of plasma sprayed mullite coatings

326

Microstructural and thermoanalytical investigations of nano-phase formation in Ti20Zr20Cu60 alloy

327

Microstructural and thermoanalytical investigations of nano-phase formation in Ti20Zr20Cu60 alloy

328

Microstructural and thermo-mechanical analysis of quench cracking during the production of bainitic–martensitic railway wheels

329

Microstructural and thermo-mechanical characterization of carbon/carbon composites

330

Microstructural and thermophysical properties of U–6 wt.%Zr alloy for fast reactor application

331

Microstructural and topographical studies of DC-pulsed plasma nitrided AISI 4140 low-alloy steel

332

Microstructural and transport properties in substituted Bi2Sr2CaCu2O8+δ-modulated compounds

333

Microstructural and tribological characterization of plasma- and gas-nitrided 2Cr13 steel in vacuum

334

Microstructural and tribological comparison of HVOF-sprayed and post-treated M–Mo–Cr–Si (M = Co, Ni) alloy coatings

335

Microstructural and tribological evaluation of potential self-lubricating coatings with additions produced by the plasma transferred arc technique

336

Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing

337

Microstructural and tribological study of Nd:YAG laser treated titanium plates

338

Microstructural and tritium release examination of titanium beryllides

339

Microstructural and vibrational properties of PVT grown Sb2Te3 crystals

340

Microstructural and wear characteristics of HVOF-sprayed nanocrystalline NiAl coating

341

Microstructural anisotropy effect on the mechanical properties of a 14Cr ODS steel

342

Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti–45Al–5Nb–0.2B–0.2C

343

Microstructural approach to understand oil absorption during vacuum and atmospheric frying Original Research Article

344

Microstructural aspects and mechanical properties of friction stir welded AA2024-T3 aluminium alloy sheet

345

Microstructural aspects and positron annihilation study on solid state synthesis of amorphous and nanocrystalline Al60−xTi40Six alloys prepared by mechanical alloying

346

Microstructural aspects of crack nucleation during cyclic loading of AA7075-T651

347

Microstructural aspects of grain growth kinetics in non-oriented electrical steels

348

Microstructural aspects of low cycle fatigued austenitic stainless tube and pipe steels

349

Microstructural aspects of manganese metal during its electrodeposition from sulphate solutions in the presence of quaternary amines

350

Microstructural aspects of oxygen ion conduction in solids

351

Microstructural aspects of plain aluminide and Pt-aluminide coatings on Ti-base alloy IMI-834

352

Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy

353

Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy

354

Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites

355

Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites

356

Microstructural aspects of superplasticity in Ti–6Al–4V alloy

357

Microstructural aspects of surface deformation processes and fracture of tensile strained high isotactic polypropylene

358

Microstructural aspects of surface deformation processes and fracture of tensile strained high isotactic polypropylene

359

Microstructural aspects of the failure analysis of nickel base superalloys components

360

Microstructural aspects of the sintering of thermal barrier coatings

361

Microstructural aspects of the sintering of thermal barrier coatings

362

Microstructural aspects related to pseudoelastic cycling in ultra fine grained Ni–Ti

363

Microstructural aspects upon hydrogen environment embrittlement of various bcc steels

364

Microstructural association between mechanical behavior with bending fracture surfaces in Astaloy CrA sintered parts alloyed by Cu and C

365

Microstructural Behavior and Corrosion Analysis of Lean Duplex Stainless Steel 2101 under the Influence of Variable Heat Inputs Using Gas Tungsten Arc Welding

366

Microstructural behavior of 8Cr-ODS martensitic steels during creep deformation

367

Microstructural behavior of rapidly solidified and extruded Al-14wt%Ni-14wt%Mm (Mm, misch metal) alloy powders

368

Microstructural behavior of rapidly solidified and extruded Al-14wt%Ni-14wt%Mm (Mm, misch metal) alloy powders

369

Microstructural behavior of VVER-440 reactor pressure vessel steels under irradiation to neutron fluences beyond the design operation period

370

Microstructural behavior of water-in-oil emulsions stabilized by fatty acid esters of propylene glycol and zinc fatty acid salts

371

Microstructural behaviour and gelling characteristics of myosystem protein gels interacting with hydrocolloids

372

Microstructural blending of coal to enhance flowability

373

Microstructural change in AlMg3 alloy irradiated by spallation neutrons and high energy protons

374

Microstructural change of 9% Cr-welded joints after long-term creep

375

Microstructural change of a 5% Cr steel weld metal during tempering

376

Microstructural change of a 5% Cr steel weld metal during tempering

377

Microstructural change of a 9Cr steel longitudinal welded tube under internal pressure creep loading

378

Microstructural change of pitch derived carbon matrix in C/C Composite by zone treatment on carbon fiber

379

Microstructural change of potato tissues frozen by ultrasound-assisted immersion freezing Original Research Article

380

Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

381

Microstructural change-induced lowering of hydrogen permeability in eutectic Nb–TiNi alloy

382

Microstructural changes accompanying high strain amplitude fatigue tests on a multiphase medium carbon microalloyed steel

383

Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties

384

Microstructural changes and corrosion resistance of AISI 310S steel exposed to 600–800 °C

385

Microstructural changes and estimated strengthening contributions in a gamma alloy Ti–45Al–5Nb pack-rolled sheet

386

Microstructural changes and evolutions of elastic properties versus temperature of alumina and alumina–magnesia refractory castables

387

Microstructural changes and fracture behavior of CF8M duplex stainless steels after long-term aging Original Research Article

388

Microstructural changes and mechanical properties of Incoloy 800 after 15 years service

389

Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings

390

Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings

391

Microstructural changes as postmortem temperature indicator in Ni–Co–Cr–Al–Y oxidation protection coatings

392

Microstructural changes caused by carbonation of cement mortar

393

Microstructural changes caused by yttrium addition to NbTi-modified centrifugally cast HP-type stainless steels

394

Microstructural changes due to anodic polarisation of palladium and silver films on YSZ

395

Microstructural changes due to heat-treatment of annealing and their effect on the creep behavior of self-reinforced silicon nitride ceramics

396

Microstructural changes due to heat-treatment of annealing and their effect on the creep behavior of self-reinforced silicon nitride ceramics

397

Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

398

Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

399

Microstructural changes due to laser ablation of oxidized surfaces on an AISI M2 tool steel

400

Microstructural changes during annealing of FePd-based thin films

401

Microstructural changes during creep of an SiC/Al2O3 composite

402

Microstructural changes during creep of an SiC/Al2O3 composite

403

Microstructural changes during osmotic dehydration of parenchymatic pumpkin tissue Original Research Article

404

Microstructural changes during oxidation of titanium alloys

405

Microstructural changes during superplastic deformation of Fe–24Cr–7Ni–3Mo–0.14N duplex stainless steel

406

Microstructural changes during superplastic deformation of Fe–24Cr–7Ni–3Mo–0.14N duplex stainless steel

407

Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steel

408

Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steel

409

Microstructural changes in (K0.5Na0.5)NbO3 ceramics sintered in various atmospheres

410

Microstructural changes in 3Y-TZP induced by scratching and indentation

411

Microstructural changes in a low-activation Fe–Cr–Mn alloy irradiated with 92 MeV Ar ions at 450°C

412

Microstructural changes in a Russian-type reactor weld material after neutron irradiation, post-irradiation annealing and re-irradiation studied by atom probe tomography and positron annihilation spectroscopy Original Research Article

413

Microstructural changes in a single crystal Ni-base superalloy induced by plastic straining

414

Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking

415

Microstructural changes in alloy 625 during high temperature creep

416

Microstructural changes in carbon nanotubes induced by annealing at high pressure Original Research Article

417

Microstructural changes in concretes with sulfate exposure

418

Microstructural changes in equal channel angular pressed low carbon steel by static annealing Original Research Article

419

Microstructural changes in eutectic tin–lead alloy due to severe bending

420

Microstructural changes in eutectic tin–lead alloy due to severe bending

421

Microstructural changes in ground 3Y-TZP and their effect on mechanical properties Original Research Article

422

Microstructural changes in high interstitial stainless austenitic steels due to ballistic impact

423

Microstructural changes in ion implanted titanium nitride

424

Microstructural changes in ion implanted titanium nitride

425

Microstructural changes in m. rectus abdominis bovine muscle after heating

426

Microstructural changes in NiO–ScSZ composite following reduction processes in pure and diluted hydrogen

427

Microstructural changes in oxygen-irradiated zirconium-based alloy characterised by X-ray diffraction techniques

428

Microstructural changes in rabbit meat wrapped with Pteridium aquilinum fern during postmortem storage

429

Microstructural changes in silicon induced by patterning with focused ion beams of Ga, Si and Au

430

Microstructural changes in silicon induced by patterning with focused ion beams of Ga, Si and Au

431

Microstructural changes in sintered Al2O3 by acid treatment of compacts produced by slip casting in gypsum molds

432

Microstructural changes in Teruel dry-cured ham during processing

433

Microstructural changes induced by low energy heavy ion irradiation in titanium silicon carbide

434

Microstructural changes induced by post-irradiation annealing of neutron-irradiated austenitic stainless steels

435

Microstructural changes induced by thermal treatment in Cu47Ti33Zr11Ni8Si1 metallic glass

436

Microstructural Changes Induced by Thermal Treatment of Cobalt(II) Hexacyanoferrate(III) Compound

437

Microstructural changes induced in “stacked cup” carbon nanofibers by heat treatment Original Research Article

438

Microstructural changes induced in Portland cement-based materials due to natural and supercritical carbonation

439

Microstructural changes inside the lamellar structures of alloy ZA27

440

Microstructural changes observed in a rapidly solidified Ni3Al alloy during isothermal treatments

441

Microstructural changes of a CuZnAlMnNi shape memory alloy due to cooling in liquid nitrogen

442

Microstructural changes of a CuZnAlMnNi shape memory alloy due to cooling in liquid nitrogen

443

Microstructural changes of a CuZnAlMnNi shape memory alloy due to cooling in liquid nitrogen

444

Microstructural changes of a thermally aged stainless steel submerged arc weld overlay cladding of nuclear reactor pressure vessels

445

Microstructural changes of aluminized Alloy 617 during high-temperature aging

446

Microstructural changes of austenitic steels caused by proton irradiation under various conditions

447

MICROSTRUCTURAL CHANGES OF IF STEELS DURING HOT STRIP ROLLING

448

Microstructural changes of nanocrystalline nickel during cold rolling Original Research Article

449

Microstructural changes of neutron irradiated ODS ferritic and martensitic steels

450

Microstructural changes of processed vitrified solid waste products

451

Microstructural changes of reference montmorillonites by cationic surfactants

452

Microstructural changes of SiCw/6061Al composite during compression at temperatures below and above the solidus of the matrix alloy

453

Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions

454

Microstructural changes produced by abrading Y-TZP in presintered and sintered conditions

455

Microstructural changes produced by plastic deformation in the UNS S31803 duplex stainless steel

456

Microstructural changes taking place during the thermo-mechanical processing and cold working of steel 18Cr18Mn0.5N

457

Microstructural changes within similar coronary stents produced from two different austenitic steels

458

Microstructural characterisation and behaviour in different salt solutions of sodium polymethacrylate-g-PEO comb copolymers

459

Microstructural characterisation and change in a.c. magnetic susceptibility of duplex stainless steel during spinodal decomposition

460

Microstructural characterisation and constitutive behaviour of alloy RR1000 under fatigue and creep–fatigue loading conditions

461

Microstructural characterisation and mechanical response of laminated Ni-intermetallic composites synthesised using Ni sheets and Al foils

462

Microstructural characterisation and physical properties of cured thermally activated clay-lime blends

463

Microstructural characterisation and properties of thermochemically treated iron-based alloys

464

Microstructural characterisation and stress determination in as-plasma sprayed and incubated bioconductive hydroxyapatite coatings

465

Microstructural characterisation by X-ray scattering of perovskite-type La0.8Sr0.2MnO3±d thin films prepared by a dip-coating process

466

Microstructural characterisation of a Ni-Cr-B-C based alloy coating produced by high velocity oxy-fuel thermal spraying

467

Microstructural characterisation of Al―Hf and Al―Li―Hf spray deposits

468

Microstructural characterisation of alkali-activated PFA matrices for waste immobilisation

469

Microstructural characterisation of an alumina/mullite composite tested in creep

470

Microstructural characterisation of an alumina/mullite composite tested in creep

471

Microstructural Characterisation of As-Cast Binary Near Gamma Titanium Aluminides

472

Microstructural characterisation of battery materials using powder diffraction data: DIFFaX, FAULTS and SH-FullProf approaches

473

Microstructural characterisation of carbon doped CrAlTiN nanoscale multilayer coatings

474

Microstructural characterisation of defect structures in a TiAl-base Ti–47Al–2Nb–2Mn(at.%)+0.8vol.%TiB2 alloy

475

Microstructural characterisation of defect structures in a TiAl-base Ti–47Al–2Nb–2Mn(at.%)+0.8vol.%TiB2 alloy

476

Microstructural characterisation of electrodeposited Co/Pt multilayers

477

Microstructural characterisation of electrodeposited Co/Pt multilayers

478

Microstructural characterisation of fatigue crack growth fracture surfaces of lamellar Ti45Al2Mn2Nb1B

479

Microstructural characterisation of fatigue crack initiation in Al-based plain bearing alloys

480

Microstructural characterisation of five simulated archaeological copper alloys using light microscopy, scanning electron microscopy, energy dispersive X-ray microanalysis and secondary ion mass spectrometry

481

Microstructural characterisation of five simulated archaeological copper alloys using light microscopy, scanning electron microscopy, energy dispersive X-ray microanalysis and secondary ion mass spectrometry Original Research Article

482

Microstructural characterisation of geopolymers synthesised from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM

483

Microstructural characterisation of interpenetrating nickel/alumina composites

484

Microstructural characterisation of material adhered over cutting tool in the dry machining of aerospace aluminium alloys

485

Microstructural characterisation of metal ion implanted silicon nitride

486

Microstructural characterisation of monolithic ceramic matrix composites from polysiloxane and SiC powder

487

Microstructural characterisation of nanocomposite nc-MeC/a-C coatings on oxygen hardened Ti-6Al-4V alloy

488

Microstructural characterisation of nuclear grade graphite

489

Micro-structural characterisation of palm fruit at sterilisation and digestion stages in relation to oil expression Original Research Article

490

Microstructural characterisation of powder metallurgy M35MHV HSS as a function of the processing route

491

Microstructural characterisation of surfactant treated nylon fibres

492

Microstructural characterisation of titanium coatings deposited using cold gas spraying on Al2O3 substrates

493

Microstructural characterisation of vacuum sintered T42 powder metallurgy high-speed steel after heat treatments

494

Microstructural Characteristic of Dissimilar Welded Components (AISI 430 Ferritic-AISI 304 Austenitic Stainless Steels) by CO2 Laser Beam Welding (LBW)

495

Microstructural characteristic of low carbon microalloyed steels produced by thermo-mechanical controlled process

496

Microstructural characteristic of NiTi coating on stainless steel by plasma transferred arc process

497

Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting

498

Microstructural characteristics and corrosion resistance in molten Zn–Al bath of Co–Mo–Cr–Si alloys

499

Microstructural characteristics and crystallization of CaO–P2O5–Na2O–ZnO glass ceramics prepared by sol–gel method

500

Microstructural characteristics and deformation properties in superplastic intermetallics

501

Microstructural characteristics and deformation properties in superplastic intermetallics

502

Microstructural characteristics and electrical properties of xPb(Mg1/3Ta2/3)O3–(0.1 − x)Pb(Mn1/3Sb2/3)O3–0.9Pb(Zr0.52Ti0.48)O3 high power piezoelectric ceramics

503

Microstructural characteristics and embrittlement phenomena in neutron irradiated 309L stainless steel RPV clad

504

Microstructural characteristics and evolution of Ti2AlN/TiAl composites with a network reinforcement architecture during reaction hot pressing process

505

Microstructural characteristics and formation mechanism of Al2O3–13 wt.% TiO2 coatings plasma-sprayed with nanostructured agglomerated powders

506

Microstructural characteristics and formation mechanism of direct laser-sintered Cu-based alloys reinforced with Ni particles

507

Microstructural characteristics and grain growth kinetics of Pr6O11 Doped SnO2-based varistors

508

Microstructural characteristics and impact fracture behavior of a high-strength low-alloy steel treated by intercritical heat treatment

509

Microstructural characteristics and mechanical properties of friction stir welded joints of Ti–6Al–4V titanium alloy

510

Microstructural characteristics and mechanical properties of hypo-eutectic and hyper-eutectic Al–Si alloys in the semi-solid forming process

511

Microstructural characteristics and mechanical properties of in situ synthesized (TiB + TiC)/TC18 composites

512

Microstructural characteristics and mechanical properties of non-combustive Mg–9Al–Zn–Ca magnesium alloy friction stir welded joints

513

Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds

514

Microstructural characteristics and nanomechanical properties across the thickness of the wild-type zebrafish skeletal bone

515

Microstructural characteristics and second-phase particles in yttrium-bearing Fe-10Ni-7Mn martensitic steels

516

Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size

517

Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size

518

Microstructural characteristics and superplastic-like behavior in aluminum powder alloy consolidated by equal-channel angular pressing Original Research Article

519

Microstructural characteristics and texture of hot strip low carbon steel produced by flexible thin slab rolling with warm rolling technology

520

Microstructural characteristics and thermal stability of a NiAl-based near-eutectic alloy fabricated by water-cooled copper mold method

521

Microstructural characteristics and thermal stability of ultrafine grained 6061 Al alloy fabricated by accumulative roll bonding process

522

Microstructural characteristics and thermal stability of ultrafine grained 6061 Al alloy fabricated by accumulative roll bonding process

523

Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel

524

Microstructural characteristics and unique properties obtained by solution treating or aging in β-rich α+β titanium alloy

525

Microstructural characteristics and unique properties obtained by solution treating or aging in β-rich α+β titanium alloy

526

Microstructural characteristics in plasma sprayed functionally graded ZrO2/NiCrAl coatings

527

Microstructural characteristics of (110) InGaAs layers grown by OMVPE

528

Microstructural characteristics of (110) InGaAs layers grown by OMVPE

529

Microstructural characteristics of (Pb1−xCax)TiO3 materials

530

Microstructural characteristics of Al2O3-based refractory containing ZrO2 induced by CO2 laser melting

531

Microstructural characteristics of an ultrafine grain metal processed with equal-channel angular pressing

532

Microstructural characteristics of Au/Al bonded interfaces

533

Microstructural characteristics of cerium oxide conversion coatings obtained by various aqueous deposition methods

534

Microstructural characteristics of forged and heat treated Inconel-718 disks

535

Microstructural characteristics of immersion tin coatings on copper circuitries in circuit boards

536

Microstructural Characteristics of Lao.7Cao.3MnO3 Films and Multilayers

537

Microstructural characteristics of large-scale ultrafine-grained copper

538

Microstructural characteristics of laser clad coatings with rare earth metal elements

539

Microstructural characteristics of mixed III–V epitaxial layers

540

Microstructural characteristics of mixed III–V epitaxial layers

541

Microstructural characteristics of Nd:YAG powders leading to transparent ceramics

542

Microstructural characteristics of nickel processed to ultrahigh strains by high-pressure torsion

543

Microstructural characteristics of post-shear localization in cold-rolled 316L stainless steel Original Research Article

544

Microstructural characteristics of PTA-overlayed NbC on pure Ti

545

Microstructural characteristics of the built up layer of a precipitation hardened nickel based superalloy by electrospark deposition

546

Microstructural characteristics of the Cretaceous Qingshankou Formation shale, Songliao Basin

547

Microstructural characteristics of tungsten-base nanocomposites produced from micropowders by high-pressure torsion Original Research Article

548

Microstructural characteristics of TZP/Ni cermets plastically deformed at high temperature

549

Microstructural characteristics on the surface and subsurface of semimetallic automotive friction materials during braking process

550

Microstructural characteristics with various cooling paths and the mechanism of embrittlement and toughening in low-carbon high performance bridge steel

551

Microstructural characterization and ablation mechanism of TiB2/(Cu,Ni) melt-infiltrated ceramic composite

552

Microstructural characterization and abrasive wear performance of HVOF sprayed Cr3C2–NiCr coating

553

Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles

554

Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal–ceramic restorations

555

Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy

556

Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V

557

Microstructural characterization and crystallization behaviour of (1 − x)TeO2–xWO3 (x = 0.15, 0.25, 0.3 mol) glasses

558

Microstructural characterization and crystallization kinetics of (1 − x)TeO2–xK2O (x = 0.05, 0.10, 0.15, 0.20 mol) glasses

559

Microstructural characterization and crystallization kinetics of (1−x)TeO2–xLiCl (x=0.6–0.4 mol) glasses

560

Microstructural characterization and crystallization of (1 − x)TeO2–xCdF2 (x = 0.10, 0.15, 0.25 mol) glasses

561

Microstructural characterization and crystallization of ZrO2–Y2O3–CuO solid solution powders

562

Microstructural characterization and dry sliding wear resistance of MoO2-strengthened γ/NiMo alloys with different primary phases

563

Microstructural characterization and electrical properties of spray pyrolyzed conventionally sintered or hot-pressed BaZrO3 and BaZr0.9Y0.1O3 − δ

564

Microstructural characterization and electrochemical properties of Ba0.5Sr0.5Co0.8Fe0.2O3−δ and its application for anode of SOEC

565

Microstructural Characterization and Electrochemical Properties of RuO2 Thin Film Electrodes Prepared by Reactive Radio-Frequency Magnetron Sputtering

566

Microstructural characterization and evolution mechanism of adiabatic shear band in a near beta-Ti alloy

567

Microstructural characterization and formation of α′ martensite phase in Ti–6Al–4V alloy butt joints produced by friction stir and gas tungsten arc welding processes

568

Microstructural characterization and fracture behavior of a microhybrid and a nanofill composite

569

Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures

570

Microstructural characterization and grain refinement of AA6082 gas tungsten arc welds by scandium modified fillers

571

Microstructural characterization and hardness evaluation of HVOF sprayed Ni–5Al coatings on Ni- and Fe-based superalloys

572

Microstructural characterization and hydrogenation properties of non-stoichiometric Zr0.9TixV2 alloys

573

Microstructural characterization and impact toughness of a jackup rig rack steel treated by intercritical heat treatment

574

Microstructural characterization and impact toughness of intercritically annealed PM steels

575

Microstructural characterization and in vitro apatite formation in CaO–P2O5–TiO2–MgO–Na2O glass-ceramics

576

Microstructural characterization and in vitro bioactivity of porous glass-ceramic scaffolds for bone regeneration by synchrotron radiation X-ray microtomography

577

Microstructural characterization and influence of manufacturing parameters on technological properties of vitreous ceramic materials

578

Microstructural characterization and mechanical behavior of Cu–Sn frangible bullets

579

Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys

580

Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions

581

Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111–TiAl6V4 dissimilar joints

582

Microstructural characterization and mechanical properties of microalloyed powder metallurgy steels

583

Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion

584

Microstructural characterization and mechanical properties of nitrided layers on aluminum substrate prepared by nitrogen arc

585

Microstructural characterization and mechanical property of active soldering anodized 6061 Al alloy using Sn–3.5Ag–xTi active solders

586

Microstructural characterization and microscopy analysis of laser cladding Stellite12 and tungsten carbide

587

Microstructural characterization and microstructural effects on the thermal conductivity of AlN(Y2O3) ceramics

588

Microstructural characterization and modeling of discontinuously-reinforced aluminum composites

589

Microstructural characterization and pore structure analysis of nuclear graphite

590

Microstructural characterization and quantification of Zn–Al–Mg surface coatings

591

Microstructural characterization and sliding wear behavior of ultra high carbon steels processed by mechanical alloying

592

Microstructural characterization and surface properties of zinc phosphated medium carbon low alloy steel

593

Microstructural characterization and tensile properties of hot pressed Al–SiC composites prepared from pure Al and Cu powders

594

Microstructural characterization and tensile properties of hot pressed Al–SiC composites prepared from pure Al and Cu powders

595

Microstructural characterization and tribocorrosion behaviour of Al/Al3Ti and Al/Al3Zr FGMs

596

Microstructural characterization and wear behavior of in situ TiC/7075 composites synthesized by displacement reactions and spray forming

597

Microstructural characterization and wear behavior of laser cladded nickel-based and tungsten carbide composite coatings

598

Microstructural characterization by electron backscatter diffraction of a hot worked Al–Cu–Mg alloy

599

Microstructural characterization during the hot deformation of 1.17C–11.3Cr–1.48V–2.24W–1.35Mo ledeburitic tool steel

600

Microstructural characterization in a hot-rolled, two-phase steel

601

Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

602

Microstructural characterization of (1 − x)TeO2–xPbF2 (x = 0.10, and 0.25 mol) glasses

603

Microstructural characterization of (Ni, Cu) Al intermetallic compounds rapidly solidified

604

Microstructural characterization of (Ni, Cu) Al intermetallic compounds rapidly solidified

605

Microstructural characterization of a composite Mo reinforced by 25 at.% TiC

606

Microstructural characterization of a diffusion-bonded joint for 9Cr-ODS and JLF-1 reduced activation ferritic/martensitic steels

607

Microstructural characterization of a directionally-solidified Ni–33 (at.%) Al–31Cr–3Mo eutectic alloy as a function of withdrawal rate

608

Microstructural characterization of a fine-grained ultra low carbon steel

609

Microstructural Characterization of a Mg–9%Li–1%Zn Alloy

610

Microstructural characterization of a new mechanically alloyed Ni-base ODS superalloy powder

611

Microstructural characterization of a rapidly solidified Al–10 Sb alloy

612

Microstructural characterization of a rapidly solidified Al–Sr–Ti alloy

613

Microstructural characterization of a warm-deformed microalloyed steel

614

Microstructural characterization of Al2O3–13 wt.% TiO2 ceramic coatings prepared by squash presetting laser cladding on GH4169 superalloy

615

Microstructural characterization of Al2O3–Ni composites prepared by electroless deposition

616

Microstructural characterization of Al-7075-T651 chips and work pieces produced by high-speed machining

617

Microstructural characterization of alkali metal mediated high temperature reactions in mullite based refractories

618

Microstructural characterization of alumina–zirconia layered ceramics using positron annihilation spectroscopy Original Research Article

619

Microstructural characterization of amorphous and nanocrystalline boron nitride prepared by high-energy ball milling

620

Microstructural characterization of amorphous SiO2 wrapped β-SiC nanowhiskers

621

Microstructural characterization of an as-quenched HSLA-100 plate steel via transmission electron microscopy

622

Microstructural characterization of an SA508–309L/308L–316L domestic dissimilar metal welded safe-end joint

623

Microstructural characterization of an ultrahigh carbon and boron tool steel processed by different routes

624

Microstructural characterization of an ultrahigh carbon and boron tool steel processed by different routes

625

Micro-structural characterization of annealed cadmium–zinc oxide thin films obtained by spray pyrolysis

626

Microstructural characterization of as-cast biocompatible Co–Cr–Mo alloys

627

Microstructural characterization of as-cast Co–B alloys

628

Microstructural characterization of as-cast Co–Si alloys

629

Microstructural characterization of as-cast Cr–B alloys

630

Microstructural characterization of as-cast Cr–Si alloys

631

Microstructural characterization of Au/Sn solder for packaging in optoelectronic applications

632

Microstructural Characterization of Au-In Thin Film Deposited by Electron Beam Evaporation : (Kajian Mikrostruktur Filem Nipis Au-In Diendapkan Menggunakan Penyejatan Sinar Elektron)

633

Microstructural Characterization of Bainitic Steel Submitted to Torsion Testing and Interrupted Accelerated Cooling

634

Microstructural characterization of bimetallic Ni–Pt catalysts supported on SiO2

635

Microstructural characterization of biomedical titanium oxide film fabricated by electrochemical method

636

Microstructural characterization of Ce1−xTbxO2−δ (0.60 ≤ x ≤ 0.90) sintered samples

637

Microstructural characterization of cemented carbide samples by image analysis techniques

638

Microstructural characterization of ceramic–intermetallic composites using TEM related techniques

639

Microstructural characterization of chitosan and alginate films by microscopy techniques and texture image analysis

640

Microstructural characterization of CIGS formation using different selenization processes

641

Microstructural characterization of cobalt–antimony eutectic alloy droplets solidified in drop tube

642

Microstructural characterization of cobalt–antimony eutectic alloy droplets solidified in drop tube

643

Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy

644

Microstructural characterization of copper corrosion in aqueous and soil environments

645

Microstructural characterization of creep anisotropy at 673 K in the M5® alloy Original Research Article

646

Microstructural characterization of creep cavitation in a fully-lamellar TiAl alloy

647

Microstructural characterization of C–SiC–carbon nanotube composite flakes Original Research Article

648

Microstructural characterization of Cu/ZnO/Al2O3 catalysts for methanol steam reforming—A comparative study Original Research Article

649

Microstructural characterization of deep-fat fried formulated products using confocal scanning laser microscopy and a non-invasive double staining procedure Original Research Article

650

Microstructural characterization of dispersion-strengthened Cu–Ti–Al alloys obtained by reaction milling

651

Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel

652

Microstructural characterization of doped-Pd/C catalysts for the selective hydrogenation of 2,4-dinitrotoluene to arylhydroxylamines Original Research Article

653

Microstructural characterization of droplet emulsified Mg60Cu30Y10 powders

654

Microstructural characterization of EUROFER 97 during low-cycle fatigue

655

Microstructural characterization of Eurofer-ODS RAFM steel in the normalized and tempered condition and after thermal aging in simulated fusion conditions

656

Microstructural characterization of Fe–Mn–C martensites athermally transformed at low temperature by Rietveld method

657

Microstructural characterization of Fe–Mn–C martensites athermally transformed at low temperature by Rietveld method

658

Microstructural characterization of ferrotitanium and ferroniobium

659

Microstructural characterization of fresh cement paste via random packing of ellipsoidal cement particles

660

Microstructural characterization of gas-pressure-sintered α-silicon nitride containing β-phase seeds

661

Microstructural characterization of Hadfield austenitic manganese steel

662

Microstructural characterization of Haynes® 242™ alloy

663

Microstructural characterization of Haynes® 242™ alloy

664

Microstructural characterization of hematite during wet and dry millings using Rietveld and XRD line profile analyses

665

Microstructural characterization of high pressure die cast Mg-Zn-Al-RE alloys

666

Microstructural characterization of high-carbon ferrochromium

667

Microstructural characterization of high-manganese austenitic steels with different stacking fault energies

668

Microstructural characterization of high-thermal-conductivity SiC ceramics

669

Microstructural characterization of in situ TiC/Al and TiC/Al–20Si–5Fe–3Cu–1Mg composites prepared by spray deposition Original Research Article

670

Microstructural characterization of intercritically annealed low alloy PM steels

671

Microstructural characterization of interface in SiC fiber-reinforced Ti–15V–3Cr–3Al–3Sn matrix composite

672

Microstructural characterization of interface in SiC fiber-reinforced Ti–15V–3Cr–3Al–3Sn matrix composite

673

Microstructural characterization of interpenetrating light weight metal matrix composites

674

Microstructural characterization of irradiation-induced Cu-enriched clusters in reactor pressure vessel steels

675

Microstructural characterization of La0.4Sr0.6Co0.8Fe0.2O3–δ films deposited by dip coating

676

Micro-structural characterization of laboratory heats of the Ferric/Martensitic steels HT-9 and T91

677

Microstructural characterization of laser cladding of Cu-30Ni

678

Micro-structural characterization of laser interference irradiated Ni/Al multi-films

679

Microstructural characterization of layered ternary Ti2AlC Original Research Article

680

Microstructural characterization of leaching effects in cement pastes due to neutralisation of their alkaline nature: Part I: Portland cement pastes

681

Microstructural characterization of mechanically activated ZnO–Cr2O3 system

682

Microstructural characterization of mechanically alloyed Al–Cu–Mn alloy with zirconium

683

Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite

684

Microstructural characterization of medical-grade stainless steel powders prepared by mechanical alloying and subsequent annealing

685

Microstructural characterization of metal foams: An examination of the applicability of the theoretical models for modeling foams

686

Microstructural characterization of modified 25Cr–35Ni centrifugally cast steel furnace tubes

687

Microstructural characterization of modified YSZ thermal barrier coatings by high-current pulsed electron beam

688

Microstructural characterization of MoO3–TiO2 nanocomposite thin films for gas sensing

689

Microstructural characterization of nanograin tin oxide gas sensors

690

Microstructural characterization of Nb–B–Si alloys with composition in the Nb−Nb5Si2B (T2-phase) vertical section

691

Microstructural characterization of Ni nanoparticles prepared by anodic arc plasma

692

Microstructural characterization of NiCr1BSiC laser clad layer on titanium alloy substrate

693

Microstructural characterization of nitrided beta Ti–Mo alloys at 1400 °C

694

Microstructural Characterization of Novel Ni-Containing Nd-Fe-B Strips by Strip Casting

695

Microstructural characterization of oxide dispersion strengthened ferritic steel powder

696

Microstructural characterization of pipe bomb fragments

697

Microstructural characterization of plasma nitrided austenitic stainless steel

698

Microstructural characterization of plasma sprayed Al2O3-40 wt.% TiO2 coatings on high density graphite with different post-treatments

699

Microstructural characterization of plasma sprayed conventional and nanostructured coatings with nitrogen as primary plasma gas

700

Microstructural characterization of plasma sprayed TiO2 functional coating with gradient of crystal grain size

701

Microstructural characterization of plasma-sprayed hydroxyapatite–10 wt% ZrO2 composite coating on titanium

702

Microstructural characterization of plasma-sprayed nanostructured zirconia powders and coatings

703

Microstructural characterization of PM-Al and PM-Al/Si composites reinforced with lignite fly ash

704

Microstructural characterization of porous materials by two-dimensional X-ray refraction topography

705

Microstructural characterization of porous thermal barrier coatings by IR gas porosimetry and sintering forecasts Original Research Article

706

Microstructural characterization of porous thermal barrier coatings by laser flash technique Original Research Article

707

Microstructural characterization of precipitates in Cu–10 wt.%Al–0.8 wt.%Be shape-memory alloy

708

Microstructural characterization of pulsed electrodeposited Au/Sn alloy thin films

709

Microstructural characterization of pulsed plasma nitrided 316L stainless steel

710

Microstructural characterization of rapidly solidified and heat-treated Ti92B8 eutectic alloy

711

Microstructural characterization of reaction-formed silicon carbide ceramics

712

Microstructural characterization of recrystallised Zircaloy-2 after pilgering using X-ray diffraction line profile analysis

713

Microstructural characterization of rheo-cast billets prepared by variant pouring temperatures

714

Microstructural characterization of segregation and precipitation in α2+γ titanium aluminides

715

Microstructural characterization of segregation and precipitation in α2+γ titanium aluminides

716

Microstructural characterization of self-supported 1.6 μm Pd/Ag membranes

717

Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel

718

Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel

719

Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel

720

Microstructural characterization of single-crystalline potassium hollandite nanowires

721

Microstructural characterization of SOFC Ni–YSZ anode composites by low-voltage scanning electron microscopy

722

Microstructural characterization of spark plasma sintered boron carbide ceramics

723

Microstructural Characterization of Spray Formed FGH4095 Superalloy During Hot Deformation Original Research Article

724

Microstructural characterization of squeeze-cast Al–8Fe–1.4V–8Si

725

Microstructural characterization of starch systems by NMR relaxation and q-space microscopy

726

Microstructural characterization of terbium-doped ceria

727

Microstructural characterization of textured ZnS thin films

728

Microstructural characterization of the C–Mn multiphase high strength cold rolled steel

729

Microstructural characterization of the evoluted phases of ball-milled α-Fe2O3 powder in air and oxygen atmosphere by Rietveld analysis

730

Microstructural characterization of the HAZ in AISI 444 ferritic stainless steel welds

731

Microstructural characterization of the interaction between 8YPSZ (EB-PVD) thermal barrier coatings and a synthetic CAS

732

Microstructural characterization of the Mg–Al alloy AM50 produced by a newly developed rheo-casting process

733

Microstructural characterization of the ODS Eurofer 97 EU-batch

734

Microstructural characterization of the oxide scale on nitride bonded SiC-ceramics

735

Microstructural characterization of the tool–chip interface enabled by focused ion beam and analytical electron microscopy

736

Microstructural characterization of thermal barrier coatings on high pressure turbine blades

737

Microstructural characterization of thin carbon films deposited from hydrocarbon mixtures

738

Microstructural characterization of thin SiOx films obtained by physical vapor deposition

739

Microstructural characterization of Ti–6Al–4V machining chips after remelting and severe deformation

740

Microstructural characterization of Ti–C–N thin films prepared by reactive crossed beam pulsed laser deposition

741

Microstructural characterization of Ti–TiN/CNx gradient-multilayered coatings

742

Microstructural characterization of transformable Fe–Mn alloys at different length scales

743

Microstructural characterization of TRIP-aided steels

744

Microstructural characterization of U–7Mo/Al–Si alloy matrix dispersion fuel plates fabricated at 500 °C

745

Microstructural characterization of unidirectional solidified eutectic Al–Si–Ni alloy

746

Microstructural characterization of vocal folds toward a strain-energy model of collagen remodeling

747

Microstructural characterization of WC-TiC-Co cutting tools during high-speed machining of P20 mold steel

748

Microstructural characterization of weld joints of 9Cr reduced activation ferritic martensitic steel fabricated by different joining methods

749

Microstructural characterization of welded zone for Fe3Al/Q235 fusion-bonded joint

750

Microstructural characterization of white charcoal

751

Microstructural characterization of white charcoal

752

Microstructural characterization of Y2O3 ODS–Fe–Cr model alloys

753

Microstructural characterization of yam starch films

754

Microstructural characterization of yttria-stabilized zirconia plasma-sprayed deposits using multiple small-angle neutron scattering Original Research Article

755

Microstructural characterization of ZrB2–SiC based UHTC tested in the MESOX plasma facility

756

Microstructural characterization of ZrB2–SiC–Si–MoSi2–WC coatings applied by SPS on graphite substrate

757

Microstructural characterization of ZrC-MoSi2 composites oxidized in air at high temperatures

758

Microstructural characterization of ZrO2 layers formed during the transition to breakaway oxidation

759

Microstructural characterization of Zr-phosphate–Nafion® membranes for direct methanol fuel cell (DMFC) applications

760

Microstructural characterization of β-lactoglobulin–konjac glucomannan systems: Effect of NaCl concentration and heating conditions

761

Microstructural characterization on ZrC doped carbon/carbon composites

762

Microstructural characterization studies to relate the properties of thermal-spray coatings to feedstock and spray conditions

763

Microstructural characterization using orientation imaging microscopy of cellular Si/SiC ceramics synthesized by replication of Indian dicotyledonous plants

764

Microstructural characterization using the Rietveld method in lead lanthanum titanate ceramics system produced by combustion synthesis

765

Microstructural characterization, meso-scale modeling and multiple-scale analysis of discretely reinforced materials

766

Microstructural characterization, meso-scale modeling and multiple-scale analysis of discretely reinforced materials

767

Microstructural characterizations and mechanical behavior of polyurethane elastomers strengthened with milled fiberglass

768

Microstructural characterizations of magnetron sputtered Ti films on glass substrate

769

Microstructural characterizations of plasma sprayed hydroxyapatite coatings

770

Microstructural coarsening kinetics for a mushy zone of a pure material

771

Microstructural coarsening of 7005 aluminum alloy semisolid billets with high solid fraction

772

Microstructural coarsening of semi-solid aluminium alloys

773

Microstructural comparison of porous oxide ceramics from the system Al2O3–ZrO2 prepared with starch as a pore-forming agent

774

Microstructural comparison of Zr73.5Nb9Cu7Ni1Al9.5 nanostructure-dendrite composites produced by different casting techniques

775

Microstructural composite mullite derived from oxides via a high-energy ball milling process

776

Microstructural consequences of nanosilica addition on aerial lime binding materials: Influence of different drying conditions

777

Microstructural consideration on quantitative analysis of thermal treatment: Application to decarburization of steel

778

Microstructural consideration on quantitative analysis of thermal treatment: Application to decarburization of steel

779

Microstructural control and mechanical properties of nickel silicides

780

Microstructural control and mechanical properties of Ti–47Al–2Cr–2Nb alloy by directional solidification electromagnetic cold crucible technique

781

Microstructural control for ductilization of multi-phase alloys based on B2 CoAl

782

Microstructural control for ductilization of multi-phase alloys based on B2 CoAl

783

Microstructural control for strengthening the γ-Fe/E21–(Fe, Mn)3AlCx alloys

784

Microstructural control for strengthening the γ-Fe/E21–(Fe, Mn)3AlCx alloys

785

Microstructural control of aluminum sheet used in automotive applications

786

Microstructural control of carbon nano fibers

787

Microstructural control of catalyst-loaded PVDF microcapsule membrane for hydrogen generation by NaBH4 hydrolysis

788

Microstructural control of Cr–Si–N films by a hybrid arc ion plating and magnetron sputtering process Original Research Article

789

Microstructural control of duplex Ti–46.5Al–2Cr–1.5Nb–1V alloys

790

Microstructural control of Nb addition in nanocrystalline hard magnets with different Nd content

791

Microstructural control of Nb–Si alloy for large Nb grain formation through eutectic and eutectoid reactions

792

Microstructural control of porous silicon by electrochemical etching in mixed HCl/HF solutions

793

Microstructural control of TiAl–Nb alloys by directional solidification Original Research Article

794

Microstructural control of TiC/a-C nanocomposite coatings with pulsed magnetron sputtering Original Research Article

795

Microstructural control of ultrafine and nanocrystalline WC–12Co–VC/Cr3C2 mixture by spark plasma sintering

796

Microstructural control through seeding and directional solidification of TiAl alloys containing Mo and C Original Research Article

797

Microstructural control to improve the resistance to radiation embrittlement in vanadium

798

Microstructural correlations to micromechanical properties of polyamide-6/low density polyethylene-grafted-maleic anhydride/nanoclay ternary nanocomposites

799

Microstructural corrosion behavior of a cold-worked steel in a sour environment

800

Microstructural defects in Ba(Mg1/3Ta2/3)O3 microwave dielectric materials

801

Microstructural defects in SiC neutron irradiated at very high temperatures

802

Microstructural deformation pattern and mechanical behavior analyses of DP600 dual phase steel

803

Microstructural degeneration of simulated heat-affected zone in 2.25Cr–1Mo steel during high-temperature exposure

804

Microstructural degeneration of simulated heat-affected zone in 2.25Cr–1Mo steel during high-temperature exposure

805

Microstructural degeneration of simulated heat-affected zone in 2.25Cr–1Mo steel during high-temperature exposure

806

Microstructural degradation mechanisms during creep in strength enhanced high Cr ferritic steels and their evaluation by hardness measurement

807

Microstructural degradation of Gr.91 steel during creep under low stress

808

Microstructural degradation of two cast heat resistant reformer tubes after long term service exposure

809

Microstructural dependence of electrical conductivity of (ZrO2)0.90–(Y2O3)0.04–(CaO)0.06 solid electrolyte

810

Microstructural dependence of electrical transport in bulk CuxGe1−x alloys

811

Microstructural dependence of electrical transport in bulk CuxGe1−x alloys

812

Microstructural dependence of fracture toughness in high-strength 7000 forging alloys

813

Microstructural dependence of the thermal and mechanical properties of monazite LnPO4 (Ln = La to Gd)

814

Microstructural dependence of Youngʹs and shear moduli of P2O5 glass reinforced hydroxyapatite for biomedical applications

815

Microstructural dependence on relevant physical–mechanical properties on SiO2–Na2O–CaO–P2O5 biological glasses

816

Microstructural dependency of thermal expansion and sintering shrinkage in plasma-sprayed zirconia coatings

817

Microstructural description of packed bed using Voronoi polyhedra

818

Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics

819

Microstructural descriptors and the effects of nuclei clustering on recrystallization path kinetics Original Research Article

820

Micro-structural design and function of an improved absorptive glass mat (AGM) separator for valve-regulated lead–acid batteries

821

Microstructural design and high temperature tensile deformation behaviour of 8 mol% yttria stabilized cubic zirconia (8YCSZ) with SiO2 additions

822

Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy

823

Microstructural design and mechanical properties of porous silicon nitride ceramics

824

Microstructural design considerations for Li-ion battery systems

825

Microstructural design for mechanical and electrical properties of spark plasma sintered Al2O3–SiC nanocomposites

826

Microstructural design for thermal creep and radiation damage resistance of titanium aluminide alloys for high-temperature nuclear structural applications

827

Microstructural design of BaTiO3-based ceramics for temperature-stable multilayer ceramic capacitors

828

Microstructural design of Ca α-sialon ceramics: effects of starting compositions and processing conditions

829

Microstructural design of hard coatings

830

Microstructural design of hardfacing Ni–Cr–B–Si–C alloys Original Research Article

831

Microstructural design of PZT ceramics

832

Microstructural design of sliding-wear-resistant liquid-phase-sintered SiC: An overview

833

Microstructural design, characterisation and indentation responses of layer-graded alumina/aluminium–titanate composites

834

Microstructural designing of silicon nitride related to toughness

835

Microstructural development and creep behavior in A286 superalloy

836

Microstructural development and electrical properties of lead zirconate titanate composite films

837

Microstructural development and electrochemical characteristics of lithium cobalt oxide powders prepared by the water-in-oil emulsion process

838

Microstructural development and mechanical properties of hypereutectic Sn–Cu solderalloys

839

Microstructural development and mechanical properties of iron based cermets processed by pressureless and spark plasma sintering

840

Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles

841

Microstructural development and mechanical properties of self-reinforced alumina with CAS addition

842

Microstructural development and microwave properties of ZnO-doped tin titanate zirconate

843

Microstructural development and microwave properties of ZnO-doped tin titanate zirconate

844

Microstructural development and radiation hardening of neutron irradiated Mo–Re alloys

845

Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part I

846

Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part II—use of a Ni interlayer

847

Microstructural development during ageing of an 11% chromium steel alloyed with copper

848

Microstructural development during ageing of an 11% chromium steel alloyed with copper

849

Microstructural development during diffusion bonding of α-silicon carbide to molybdenum

850

Microstructural development during diffusion bonding of α-silicon carbide to molybdenum

851

Microstructural development during directional solidification of α-seeded TiAl alloys Original Research Article

852

Microstructural development during equal channel angular pressing of hypo-eutectic Al–Si casting alloy by different processing routes

853

Microstructural development during final-stage sintering of nanostructured zirconia based ceramics

854

Microstructural development during final-stage sintering of nanostructured zirconia based ceramics

855

Microstructural development during high temperature creep of 9% Cr steel

856

Microstructural development during high temperature creep of 9% Cr steel

857

Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel Original Research Article

858

Microstructural development during transient directional solidification of hypermonotectic Al–Bi alloys

859

Microstructural development in a low carbon Ti-microalloyed steel during deformation within the ferrite region

860

Microstructural development in a model austenitic alloy following electron and ion irradiation

861

Microstructural development in a rapidly cooled eutectic Sn–3.5% Ag solder reinforced with copper powder

862

Microstructural development in advanced ferritic–martensitic steel HCM12A

863

Microstructural development in AlN composite ceramics

864

Micro-structural development in Al–Si microcrystalline alloys

865

Micro-structural development in Al–Si microcrystalline alloys

866

Micro-structural development in Al–Si microcrystalline alloys

867

Microstructural development in Al–Sn alloys directionally solidified under transient heat flow conditions

868

Microstructural development in an ultrafine cement — Part II

869

Microstructural development in cubic silicon carbide during irradiation at elevated temperatures

870

Microstructural development in equal-channel angular pressing using a 60° die Original Research Article

871

Microstructural development in equiatomic multicomponent alloys

872

Microstructural development in equiatomic multicomponent alloys

873

MICROSTRUCTURAL DEVELOPMENT IN FLY ASH MODIFIED WITH LIME AND GYPSUM

874

Microstructural Development in Friction Welded AZ31 Magnesium Alloy

875

Microstructural development in irradiated U-7Mo/6061 Al alloy matrix dispersion fuel

876

Microstructural development in nanocrystalline during H-absorption/desorption cycling

877

Microstructural development in porous β-Si3N4 ceramics prepared with low volume RE2O3–MgO–(CaO) additions (RE = La, Nd, Y, Yb)

878

Microstructural development in PWA-1480 electron beam welds — an atom probe field ion microscopy study

879

Microstructural development in rapidly solidified silicon-rich alloys

880

Microstructural development in rapidly solidified silicon-rich alloys

881

Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions

882

Microstructural development in the dual phase intermetallic alloy Ni50Al25Be25

883

Microstructural development in volcanic ash soils from South Chile

884

Microstructural development inside the stress induced martensite variant in a Ti–Ni–Nb shape memory alloy Original Research Article

885

Microstructural development involving nucleation and growth phenomena simulated with the Phase Field method

886

Microstructural development involving nucleation and growth phenomena simulated with the Phase Field method

887

Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration

888

Microstructural development of a heavily neutron-irradiated ODS ferritic steel (MA957) at elevated temperature

889

Microstructural development of a vitrified hindered phenol compound during thermal annealing

890

Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing

891

Microstructural development of Al–15wt.%Mg2Si in situ composite with mischmetal addition

892

Microstructural development of Al–15wt.%Mg2Si in situ composite with mischmetal addition

893

Microstructural development of diffusion-brazed austenitic stainless steel to magnesium alloy using a nickel interlayer

894

Microstructural development of early age hydration shells around cement grains

895

Micro-structural development of gap-graded blended cement pastes containing a high amount of supplementary cementitious materials

896

Microstructural development of high temperature deformed AZ31 magnesium alloys

897

Microstructural development of indirect-extruded TiAl–Mn–Mo–C intermetallic alloys during aging

898

Microstructural development of indirect-extruded TiAl–Mn–Mo–C intermetallic alloys during aging

899

Microstructural development of interface layers between co-sintered alumina and spinel compacts

900

Microstructural development of liquid-phase-sintered silicon carbide during annealing with uniaxial pressure

901

Microstructural development of neutron irradiated W–Re alloys

902

Microstructural development of Ni-1Ce10ScSZ cermet electrode for Solid Oxide Electrolysis Cell (SOEC) application

903

Microstructural development of silicon nitride with aligned β-Si3N4 whiskers

904

Microstructural development of SrAl12O19 in alumina–strontia composites

905

Microstructural Development of Stabilized Fly Ash as Pavement Base Material

906

Microstructural development of thin films grown by pulsed laser deposition

907

Microstructural development of thin films grown by pulsed laser deposition

908

Microstructural development of tin-doped ZnO bulk ceramics

909

Microstructural development of Y-α/(β)-sialons after post heat-treatment and its effect on mechanical properties

910

Microstructural development on sol–gel derived cordierite ceramics doped B2O3 and P2O5

911

Microstructural development under irradiation in European ODS ferritic/martensitic steels

912

Microstructural developments in TLP bonds using thin interlayers based on Ni–B coatings

913

Microstructural dynamics in a foreign exchange electronic broking system

914

Microstructural effect of the shrinkage of cement-based materials during hydration, as indicated by electrical resistivity measurement

915

Microstructural effect of α-Sialon ceramic on the resistance to cavitation erosion in deionized water

916

MICROSTRUCTURAL EFFECT ON LOW CYCLE FATIGUE BEHAVIOUR IN Ti-ALLOYS UNDER BIAXIAL LOADING

917

Microstructural effect on moisture-induced embrittlement of the Ni3(Si,Ti)-based alloys

918

Microstructural effect on moisture-induced embrittlement of the Ni3(Si,Ti)-based alloys

919

Microstructural effect on near-neutral pH stress corrosion cracking resistance of pipeline steels

920

Microstructural effects and large microhardness in cobalt processed by high pressure torsion consolidation of ball milled powders Original Research Article

921

Microstructural effects in elastic composites

922

Microstructural effects in finite multilayers with aligned cracks

923

Microstructural effects in low loss power ferrites

924

Microstructural effects of AZ31 magnesium alloy on its tensile deformation and failure behaviors

925

Microstructural Effects of Ion Implantation on Molybdenum

926

Microstructural effects of processing in the plastic-bonded explosive Composition A-3

927

Microstructural effects of temperature and neutron irradiation on optical windows

928

Microstructural effects on crack closure and propagation thresholds of small fatigue cracks

929

Microstructural effects on crack path selection in bending and fatigue in a Nb–19Si–5Cr–3.5Hf–24Ti–0.75Sn–1W alloy

930

Microstructural effects on ductile fracture in heterogeneous materials. Part I: Sensitivity analysis with LE-VCFEM

931

Microstructural effects on ductile fracture in heterogeneous materials. Part II: Applications to cast aluminum microstructures

932

Microstructural effects on internal mass transfer of lipids in prepressed and flaked vegetable substrates

933

Microstructural effects on macroscopic fracture properties Special Issue: 19th European Conference on Fracture (ECF19) selected papers

934

Microstructural effects on microbial survival: phase-separating dextran solutions

935

Microstructural effects on tensile properties of cast TiAl–Fe–V–B alloy

936

Microstructural effects on tensile properties of cast TiAl–Fe–V–B alloy

937

Microstructural effects on tension and fatigue behavior of Cu–15Ni–8Sn sheet

938

Microstructural effects on tension behavior of Cu–15Ni–8Sn sheet

939

Microstructural effects on the dry wear resistance of powder metallurgy Al–Si alloys

940

Microstructural effects on the electrical and mechanical properties of Ni–YSZ cermet for SOFC anode

941

Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3+δ materials on changing from reducing to oxidising conditions

942

Microstructural effects on the electrical properties of grain boundary Fe-doped LSGM

943

Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld

944

Microstructural effects on the formation and degradation of zinc phosphate coatings on 2024-Al alloy

945

Microstructural effects on the fretting wear of Inconel 690 steam generator tube

946

Microstructural effects on the initiation of zinc phosphate coatings on 2024-T3 aluminum alloy

947

Microstructural effects on the magnitude of Lüders strains in a low alloy steel

948

Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys Original Research Article

949

Microstructural effects on the permeability of periodic fibrous porous media

950

Microstructural effects on the resistance to cavitation erosion of ZrO2 ceramics in water

951

Microstructural effects on the short crack behaviour of a stainless steel weld metal during low-cycle fatigue

952

Microstructural effects on the sliding wear of transparent magnesium-aluminate spinel

953

Microstructural effects on the sliding-wear resistance of pressureless liquid-phase-sintered SiC under diesel fuel

954

Microstructural effects on the superionic conductivity of a lithiated glass-ceramic

955

Microstructural effects on the transmittance of translucent AlN ceramics by SPS

956

Microstructural effects on yield surface evolution in cubic metals using the viscoplastic ϕ-model

957

Microstructural elasticity and regional heterogeneity in human femoral bone of various ages examined by nano-indentation

958

Microstructural engineering of functionally graded materials by electrophoretic deposition

959

Microstructural engineering of microwave dielectric ceramics

960

Microstructural evaluation and flexural mechanical behavior of pultruded glass fiber composites

961

Microstructural evaluation and mechanical properties of Ir–Hf–Zr ternary alloys at room and high temperatures

962

Microstructural Evaluation and Strain Life Behavior of Friction Stir Processed Ferritic Nodular Iron

963

Microstructural Evaluation for TIG Welding of AA6061-T6 using ER5356 Filler Metal; in Postweld and as-Weld Treatment

964

Microstructural evaluation of a clay ceramic incorporated with petroleum waste

965

Microstructural evaluation of deep-fat fried chicken nugget batter coating using confocal laser scanning microscopy Original Research Article

966

Microstructural evaluation of interfacial intermetallic compounds in Cu wire bonding with Al and Au pads

967

Microstructural evaluation of monolithic and continuous fibre reinforced Al-12wt.%Si produced by low pressure plasma spraying

968

Microstructural evaluation of monolithic and continuous fibre reinforced Al-12wt.%Si produced by low pressure plasma spraying

969

Microstructural evaluation of thermally fatigued SiC-reinforced Al2O3/ZrO2 matrix composites

970

Micro-structural evaluation of Ti/Al/Ni/Au ohmic contacts with different Ti/Al thicknesses in AlGaN/GaN HEMTs

971

Microstructural evaluation of U-rich U–Zr alloys under near-equilibrium condition

972

Microstructural evaluation of ZrO2–MgO coatings

973

Microstructural evidence for conditioning-dependent δ → α′ transformations in retained δ-phase Pu–Ga Original Research Article

974

Microstructural evidence for N–S shortening in the Mount Isa Inlier (NW Queensland, Australia): the preservation of early W–E-trending foliations in porphyroblasts revealed by independent 3D measurement techniques

975

Microstructural evidence for the thermal oxidation protection of carbon/phenolic towpregs and composites Original Research Article

976

Microstructural evolution analysis of NITE SiC/SiC composite using TEM examination and dual-ion irradiation

977

Microstructural Evolution and Age Hardening in Aluminium Alloys: Atom Probe Field-Ion Microscopy and Transmission Electron Microscopy Studies

978

Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy

979

Microstructural evolution and amorphous phase formation of Fe42Ni28Zr8Ta2B10C10 alloy produced by mechanical alloying

980

Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep

981

Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep

982

Microstructural evolution and characterization of super-induced MgO composite on zinc-rich coatings

983

Microstructural evolution and compressive deformation of a new Ni–Fe base superalloy after long term thermal exposure at 700 °C

984

Microstructural evolution and contact-mechanical properties of SiC ceramics prepared colloidally with low additive content

985

Microstructural evolution and creep properties of precipitation-strengthened Al–0.06Sc–0.02Gd and Al–0.06Sc–0.02Yb (at.%) alloys Original Research Article

986

Microstructural evolution and deformation mechanism of the 80 W-20Cu alloy at ultra-high strain rates under explosive loading

987

Microstructural evolution and dielectric properties of Cu-deficient and Cu-excess CaCu3Ti4O12 ceramics

988

Microstructural evolution and dielectric properties of SiO2-doped CaCu3Ti4O12 ceramics

989

Microstructural evolution and electric properties of mechanically activated BaTiO3 ceramics

990

Microstructural evolution and electro-resistivity in HPT nickel

991

Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation Original Research Article

992

Microstructural evolution and final properties of a cold-swaged multifunctional Ti–Nb–Ta–Zr–O alloy produced by a powder metallurgy route

993

Microstructural evolution and flow stress of semi-solid type 304 stainless steel

994

Microstructural evolution and formation mechanism of bimodal structure of 0.2% carbon steel subjected to the heavy-reduction controlled rolling process

995

Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt Original Research Article

996

Microstructural evolution and geologic significance of garnet pyriclasites in the Hoher-Bogen shear zone (Bohemian Massif, Germany)

997

Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy Original Research Article

998

Microstructural evolution and grain boundary structure during static recrystallization in synthetic polycrystals of Sodium Chloride containing saturated brine

999

Microstructural evolution and hardening parameters

1000

Microstructural evolution and hardening parameters

بازگشت