ليست عنوان مقالات لاتين Modeling solute diffusion in aqueous polymer solutions Modeling the impact of HRM practices on knowledge workers’ job satisfaction and intention to stay: re-examining the Herzbergʹʹs two-factor theory of motivation

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Modeling solute diffusion in aqueous polymer solutions

2

Modeling solute diffusion in the presence of pore-scale heterogeneity: method development and an application to the Culebra dolomite Member of the Rustler Formation, New Mexico, USA

3

Modeling solute transport in one-dimensional homogeneous and heterogeneous soil columns with continuous time random walk

4

Modeling solute-vacancy trapping at oversized solutes and its effect on radiation-induced segregation in Fe–Cr–Ni alloys

5

Modeling solution of flexible polyelectrolyte in explicit solvent

6

Modeling Solutions for the Development of Sports Entrepreneurship Opportunities at the Middle Level

7

MODELING SOLVENT EXTRACTION SYSTEMS WITH SXFIT

8

Modeling Some Drying Characteristics of High Moisture Potato Slices in Fixed, Semi Fluidized and Fluidized Bed Conditions

9

Modeling soot formation and burnout in a high temperature laminar diffusion flame burning under oxygen-enriched conditions

10

Modeling soot formation in turbulent kerosene/air jet diffusion flames

11

Modeling soot formation in turbulent methane–air jet diffusion flames

12

Modeling Soret coefficient measurement experiments in porous media considering thermal and solutal convection

13

Modeling sorites reasoning with adaptive fuzzy logic

14

Modeling Sorption , Exchange Processes in Column Experiments , Large Scale Field Studies

15

MODELING SORPTION BEHAVIOR OF ATRAZINE ON INTACT SOIL COLUMNS

16

MODELING SORPTION BEHAVIOR OF ATRAZINE ON INTACT SOIL COLUMNS

17

Modeling sorption of divalent metal cations on hydrous manganese oxide using the diffuse double layer model

18

Modeling sorption of fluoride on to iron rich laterite

19

Modeling Sources of Self-report Bias in a Survey of Drug Use Epidemiology

20

Modeling soybean canopy resistance from micrometeorological and plant variables for estimating evapotranspiration using one-step Penman–Monteith approach

21

Modeling space and time dependence in environmental studies

22

Modeling spatial and semantic cues for large-scale near-duplicated image retrieval

23

Modeling Spatial and Temporal Changes in Water Resources Quality by Cultivating a Variety of Agricultural Products

24

Modeling spatial and temporal dynamics of Chenopodium album L. under the influence of site-specific weed control

25

Modeling spatial and temporal variation of suitable nursery habitats for Atlantic sturgeon in the Chesapeake Bay

26

Modeling spatial and temporal variations in temperature and salinity during stratification and overturn in Dexter Pit Lake, Tuscarora, Nevada, USA

27

Modeling spatial database incremental updating based on base state with amendments

28

Modeling spatial density in low earth orbits using wavelets and random search Original Research Article

29

Modeling spatial distribution of floc size in turbulent processes using the quadrature method of moment and computational fluid dynamics

30

Modeling Spatial Distribution of Sergentomyia minuta (Diptera: Psychodidae) and its Potential Implication in Leishmaniasis Transmission in Morocco

31

Modeling spatial distribution of Tehran air pollutants using geostatistical methods incorporate uncertainty maps

32

Modeling spatial distributional patterns of benthic meiofauna species by Thomas and related processes

33

Modeling spatial distributional patterns of benthic meiofauna species by Thomas and related processes

34

Modeling Spatial Dstribution of Lantana Camara - A Comparative Study

35

Modeling spatial patterns and species associations in a Hyrcanian forest using a multivariate log-Gaussian Cox process

36

Modeling spatial patterns of rare species using eigenfunction-based spatial filters: An example of modified delta model for zero-inflated data

37

Modeling spatial patterns of rare species using eigenfunction-based spatial filters: An example of modified delta model for zero-inflated data

38

Modeling spatial patterns of saturated areas: A comparison of the topographic wetness index and a dynamic distributed model

39

Modeling spatial strain gradient effects in thermo-mechanical fatigue of copper microstructures

40

Modeling Spatial Survival Data Using Semiparametric Frailty Models

41

Modeling spatial variability of airborne levoglucosan in Seattle, Washington

42

Modeling spatial variation in tree diameter–height relationships

43

Modeling spatially dependent kinetics of helium desorption in BCC iron following He ion implantation

44

Modeling spatially explicit fire impact on gross primary production in interior Alaska using satellite images coupled with eddy covariance

45

Modeling spatially explicit population dynamics of Pterostichus melanarius I11. (Coleoptera: Carabidae) in response to changes in the composition and configuration of agricultural landscapes

46

Modeling spatially resolved data of methane catalytic partial oxidation on Rh foam catalyst at different inlet compositions and flowrates

47

Modeling spatially resolved profiles of methane partial oxidation on a Rh foam catalyst with detailed chemistry

48

Modeling spatio-temporal constraints for multimedia objects

49

Modeling spatio-temporal constraints for multimedia objects

50

Modeling spatio-temporal crop allocation patterns by a stochastic decision tree method, considering agronomic driving factors

51

Modeling spatiotemporal dynamics of vole populations in Europe and America

52

Modeling Spatio-temporal Malaria Risk Using Remote Sensing and Environmental Factors

53

Modeling Spatio-Temporal Patterns Generated byBacillus subtilis

54

Modeling spatiotemporal patterns of understory light intensity using airborne laser scanner (LiDAR)

55

Modeling spatiotemporal variability of intra-urban air pollutants in Detroit: A pragmatic approach

56

Modeling speciated terpenoid emissions from the European boreal forest

57

Modeling species fitness in competitive environments

58

Modeling species fitness in competitive environments

59

Modeling species invasions in Ecopath with Ecosim: An evaluation using Laurentian Great Lakes models

60

Modeling species invasions in Ecopath with Ecosim: An evaluation using Laurentian Great Lakes models

61

Modeling species’ geographic distributions for preliminary conservation assessments: an implementation with the spiny pocket mice (Heteromys) of Ecuador Original Research Article

62

Modeling species-specific diacylglycerol dynamics in the RAW 264.7 macrophage

63

Modeling specificity in the yeast MAPK signaling networks

64

Modeling spectra of breaking waves propagating over a beach

65

Modeling spectra of cosmic rays influencing on the ionospheres of the earth and outer planets during solar maximum and minimum Original Research Article

66

Modeling spectral reflectance of optically complex waters using bio-optical measurements from Tokyo Bay

67

Modeling spectral tuning in monomeric teal fluorescent protein mTFP1 Original Research Article

68

Modeling specular reflections from hydrocarbon lakes on Titan

69

Modeling speed restrictions to mitigate lethal collisions between ships and whales in the Stellwagen Bank National Marine Sanctuary, USA

70

Modeling sphere-like manifolds with spherical Powell–Sabin B-splines Original Research Article

71

Modeling Spikelet Sterility Induced by Low Temperature in Rice

72

Modeling spillovers and feedback of international trade in a disequilibrium framework

73

Modeling Spread of COVID-19 in Pakistan and Policy Interventions to Mitigate its Spread

74

Modeling Spreadsheet Audit: A Rigorous Approach to Automatic Visualization

75

Modeling sprinkler efficiency with consideration of microclimate modification effects

76

Modeling stability of trapped ferromagnetic nanoparticle chains

77

Modeling stabilization of SiO bonds by Pd/Pt complexes using density functional theory

78

Modeling Stacking Faults in the Layered Molecular-Based Magnets AMIIFe(C2O4)3 {MII=Mn, Fe; A=Organic Cation}

79

Modeling staff scheduling problems. A tutorial

80

Modeling staffing flexibility: A case of China

81

Modeling stand water budgets of mixed temperate broad-leaved forest stands by considering variations in species specific drought response

82

Modeling Staphylococcus aureus growth and enterotoxin production in milk Original Research Article

83

Modeling state-level soil carbon emission factors under various scenarios for direct land use change associated with United States biofuel feedstock production

84

Modeling state-level water quality management: the case of the Neuse River Basin

85

Modeling Static Bruising in Apple Fruits: A Comparative Study, Part I: Analytical Approach

86

Modeling Static Bruising in Apple Fruits: A Comparative Study, Part II: Finite Element Approach

87

Modeling static charge dissipation on solids: An historical perspective

88

Modeling statistical dependence of Markov chains via copula models

89

Modeling Steady-State Biofilms with Dual-Substrate Limitations

90

Modeling steam pressure under martian lava flows

91

Modeling Steel Frame Buildings in Three Dimensions. I: Panel Zone and Plastic Hinge Beam Elements

92

Modeling Steel Frame Buildings in Three Dimensions. II: Elastofiber Beam Element and Examples

93

Modeling sterilization process of canned foods using artificial neural networks

94

Modeling STM tips by single absorbed atoms on W(100) films: 5d transition metal atoms

95

Modeling Stochastic Dynamical Systems for Interactive Simulation

96

Modeling stochastic fibre clumps Original Research Article

97

Modeling stochastic live load for long-span bridge based on microscopic traffic flow simulation

98

Modeling stock market dynamics based on conservation principles

99

Modeling Stock Market Exchange Prices Using Artificial Neural Network: A Study of Amman Stock Exchange

100

Modeling Stock Market Volatility Using Univariate GARCH Models: Evidence from Bangladesh

101

Modeling stock price dynamics by continuum percolation system and relevant complex systems analysis

102

Modeling stock-out loss and overstocking loss generated by bullwhip eect

103

Modeling storage and demand management in power distribution grids

104

Modeling Storm Water Mass Emissions to the Southern California Bight

105

Modeling stormwater runoff from green roofs with HYDRUS-1D

106

Modeling Storm-Water Runoff Quantity and Quality from Marine Drydocks

107

Modeling strain hardening and texture evolution in friction stir welding of stainless steel

108

Modeling strain hardening and texture evolution in friction stir welding of stainless steel

109

Modeling strategies of 3D woven composites: A review Review Article

110

Modeling strategies to compute natural circulation using CFD in a VHTR after a LOFA

111

Modeling strategy of the source and sink terms in the two-group interfacial area transport equation

112

Modeling stratification in two-dimensional sandpiles

113

Modeling stratocumulus-topped boundary-layer structure with statistical diffusion theory

114

Modeling stream water nutrient concentrations and loadings in response to weather condition and forest harvesting

115

Modeling stream water nutrient concentrations and loadings in response to weather condition and forest harvesting

116

Modeling stream–aquifer interactions with linear response functions

117

Modeling strength and stability in storm snow for slab avalanche forecasting

118

Modeling strength enhancement of FRP confined concrete cylinders using soft computing

119

Modeling stress evolution around a rising salt diapir

120

Modeling stress wave propagation in rocks by distinct lattice spring model

121

Modeling stress-dependent matrix cracking and stress–strain behavior in 2D woven SiC fiber reinforced CVI SiC composites

122

Modeling stresses on satellites due to nonsynchronous rotation and orbital eccentricity using gravitational potential theory

123

Modeling Strombolian eruptions of Karymsky volcano, Kamchatka, Russia

124

Modeling strong discontinuities at finite strains—A novel numerical implementation Original Research Article

125

Modeling structural equations of the effect of stress and perceived social support on the postpartum depression considering the mediator role of vulnerable personality in the mothers

126

Modeling structural metastability of irradiated thin films

127

Modeling Structural Relationship Between Perceived Organizational Support and Quality of Work Life Among Secondary School Teachers of English as a Foreign Language

128

Modeling Structural Relationships of Metacognitive States with Tendency to Virtual Networks through Mediating of Social Adjustment in Gifted Students

129

Modeling Structural Relationships of Self-efficacy with Tendency to Virtual Networks through the Mediating Role of Social Adjustment in Gifted Students

130

Modeling structure and dynamics of solvated molecular ions: Photodissociation and recombination in I2−(CO2)n Original Research Article

131

Modeling studies and analysis of seepage into drifts at Yucca mountain

132

Modeling studies and efficient numerical methods for proton exchange membrane fuel cell

133

Modeling studies for adsorption of phenol and co-pollutants onto granular activated carbon prepared from olive oil industrial waste

134

Modeling studies investigating the causes of preferential depletion of silicic acid relative to nitrate during SERIES, a mesoscale iron enrichment in the NE subarctic Pacific

135

Modeling studies of bi- and quad-wing flapping ornithopter kinematics and aerodynamics

136

Modeling Studies of Chromatin Fiber Structure as a Function of DNA Linker Length

137

Modeling studies of the coastal circulation off Northern California: shelf response to a major Eel river flood event

138

Modeling Studies of the Effect of Twins on the X-ray Diffraction Patterns of Boron Carbide

139

Modeling studies of the effects of wind forcing and thermohaline gradients on the California Current System

140

Modeling studies of the far-field effects of tidal flat reclamation on tidal dynamics in the East China Seas

141

Modeling studies of the sulfur cycle in low-level, warm stratiform clouds

142

Modeling studies on irregular motor unit potentials

143

Modeling studies: Adsorption of aniline blue by using Prosopis Juliflora carbon/Ca/alginate polymer composite beads

144

Modeling studies: The Dachny geothermal reservoir, Kamchatka, Russia

145

Modeling study of 5 kWe-scale autothermal diesel fuel reformer Original Research Article

146

Modeling study of a flexible hub–beam system with large motion and with considering the effect of shear deformation

147

Modeling study of growth and potential geohazard for LUSI mud volcano: East Java, Indonesia

148

Modeling study of homogeneous NO and N2O formation from oxidation of HCN in a flow reactor

149

Modeling study of oxygenated fuels on diesel combustion: Effects of oxygen concentration, cetane number and C/H ratio

150

Modeling study of radiation effects on thrombocytopoietic and granulocytopoietic systems in humans Original Research Article

151

Modeling study of reactive gaseous mercury in the urban air

152

Modeling study of seasonal and inter-annual variability of circulation in the coastal upwelling site of the El Loa River off northern Chile

153

Modeling study of soot formation and oxidation in DI diesel engine using an improved soot model

154

Modeling study of the aspect ratio influence on urban canopy energy fluxes with a modified wall-canyon energy budget scheme

155

Modeling study of the influences of tide and stratification on age of water in the tidal James River

156

Modeling study of the Pauzhetsky geothermal field, Kamchatka, Russia

157

Modeling study of three consecutive high ozone episodes over Taiwan in spring 2007

158

Modeling study on axial wetting length of meniscus in vertical rectangular microgrooves

159

Modeling study on the air quality impacts from emission reductions and atypical meteorological conditions during the 2008 Beijing Olympics

160

Modeling study on the characteristics of laminar and turbulent argon plasma jets impinging normally upon a flat plate in ambient air

161

Modeling study on the mass transfer of hollow fiber renewal liquid membrane: Effect of the hollow fiber module scale

162

Modeling study on the production of hydrogen/syngas via partial oxidation using a homogeneous charge compression ignition engine fueled with natural gas

163

Modeling stuttering etiology: Clarifying levels of description and measurement

164

Modeling stylized facts for financial time series

165

Modeling subgrid scale mixture fraction variance in LES of evaporating spray

166

Modeling subgrid viscosity for advection–diffusion problems Original Research Article

167

Modeling Subject Access: Extending the FRBR and FRANAR Conceptual Models

168

Modeling subjective evaluation for fuzzy group multicriteria decision making

169

Modeling sublimation of ice exposed by new impacts in the martian mid-latitudes

170

Modeling submerged hollow-fiber membrane filtration for wastewater treatment

171

Modeling Subordinate Perceptions of Sexual Harassment: The Role of Superior–Subordinate Social–Sexual Interaction

172

Modeling subspecies and the tumor-immune system interaction: Steps toward understanding therapy

173

Modeling substrate concentration in skeletal muscle

174

Modeling Substrate Interactions during Aerobic Biodegradation of Mixtures of Vinyl Chloride and Ethene

175

Modeling substrate particle degradation by Bacillus coagulans biofilm

176

Modeling subsurface water resource systems involving heterogeneous porous media using the variational multiscale formulation

177

Modeling Successful Performance in Web Searching

178

Modeling sucrose hydrolysis in dilute sulfuric acid solutions at pretreatment conditions for lignocellulosic biomass

179

Modeling sudden volatility changes: Evidence from Japanese and Korean stock markets

180

Modeling Suicide Attempt: A Population-Based Case-Control Study

181

Modeling sulfur dioxide concentrations in Mt. Rainier area during prevent

182

Modeling supernovae: braving a bold new frontier

183

Modeling supply and return line dynamics for an electrohydraulic actuation system

184

Modeling support of functional relationships between capillary pressure, saturation, interfacial area and common lines

185

Modeling support resistance in zeolite membranes

186

Modeling surface and ground water mixing in the hyporheic zone using MODFLOW and MT3D

187

Modeling surface energy fluxes for Iperَ, SP, Brazil: an approach using numerical inversion

188

MODELING SURFACE TENSION AND WALL ADHESION IN MOLD FILLING PROCESS

189

Modeling Surface Texture in the Peripheral Milling Process Using Neural Network, Spline, and Fractal Methods with Evidence of Chaos

190

Modeling Surface Texture in the Peripheral Milling Process Using Neural Network, Spline, and Fractal Methods with Evidence of Chaos

191

Modeling Surface Water Critical Loads with PROFILE: Possibilities and Challenges

192

Modeling surface-mediated renoxification of the atmosphere via reaction of gaseous nitric oxide with deposited nitric acid

193

Modeling surfaces from meshes of arbitrary topology Original Research Article

194

Modeling surgical expertise for motor skill acquisition

195

Modeling surgical processes: A four-level translational approach

196

Modeling Surperspective Projection of Landscapes for Geographical Guide-Map Generation

197

Modeling survey response bias – with an analysis of the demand for an advanced electronic device

198

Modeling survival in childhood cancer studies using two-stage non-mixture cure models

199

Modeling susceptibility to landslides using the weight of evidence approach: Western Colorado, USA

200

Modeling suspended sediment distribution patterns of the Amazon River using MODIS data

201

Modeling Suspended Sediments in Dez Basin

202

Modeling suspended solids in a Northern Chilean Patagonia glacier-fed fjord: GLOF scenarios under climate change conditions

203

Modeling suspended solids in a Northern Chilean Patagonia glacier-fed fjord: GLOF scenarios under climate change conditions

204

Modeling switched circuits based on wavelet decomposition and neural networks

205

Modeling switching response of torsional micromirrors for optical microsystems

206

Modeling symbiosis by interactions through species carrying capacities

207

Modeling synchronous voltage source converters in transmission system planning studies

208

Modeling Synovial Sarcoma: Timing Is Everything

209

Modeling synthetic unit hydrograph parameters with geomorphologic parameters of watersheds

210

Modeling system effects in ballistic impact into multi-layered fibrous materials for soft body armor

211

Modeling systems of innovation: An enterprise-centered view

212

Modeling T Cell-Antigen Presenting Cell Interactions

213

Modeling Taiwanese speakers’ knowledge of tone sandhi in reduplication

214

Modeling tangential injection into ideal tubular flames

215

Modeling T-cell Proliferation: an Investigation of the Consequences of the Hayflick Limit

216

Modeling TCP behavior in a differentiated services network

217

Modeling TCP performance with proxies

218

Modeling TCP Reno performance: a simple model and its empirical validation

219

Modeling TCP throughput: An elaborated large-deviations-based model and its empirical validation

220

Modeling technical change in energy system analysis: analyzing the introduction of learning-by-doing in bottom-up energy models

221

Modeling techniques applied to the study of gas diffusion electrodes and proton exchange membrane biochemical fuel cells

222

Modeling techniques for analysing conformational transitions in hemocyanins by small-angle scattering of X-rays and neutrons

223

Modeling techniques for energy-efficient system-on-a-chip signaling

224

Modeling techniques for periodic vehicle routing problems

225

Modeling techniques for simulating workpiece deflections in NC milling

226

Modeling techniques for VBR video: feasibility and limitations

227

Modeling technological changes in the biofuel production system in Indonesia

228

Modeling technological learning and its application for clean coal technologies in Japan

229

Modeling technology adoption as an irreversible investment under uncertainty: the case of the Turkish electricity supply industry

230

Modeling technology adoptions for sustainable development under increasing returns, uncertainty, and heterogeneous agents

231

Modeling technology impact on cluster microprocessor performance

232

Modeling technophobia: a case for word processing

233

Modeling Temperature and Pressure Gradients During Cooling of Thin-Walled Cryogenic Targets

234

Modeling temperature dependence of honey viscosity and of related supersaturated model carbohydrate systems Original Research Article

235

Modeling temperature distribution and thermal property of asphalt concrete for laboratory testing applications

236

Modeling temperature distribution in rigid pavement slabs: Impact of air temperature

237

Modeling Temperature Effects on Decomposition

238

Modeling temperature gradients in wine fermentation tanks Original Research Article

239

Modeling Temperature-Dependent Protein Structural Transitions by Combined Near-IR and Mid-IR Spectroscopies and Multivariate Curve Resolution

240

Modeling temporal and spatial variability of traffic-related air pollution: Hourly land use regression models for black carbon

241

Modeling Temporal Behavior of Postnatal Cat Retinal Ganglion Cells

242

Modeling temporal changes in surface spatial heterogeneity over an agricultural site

243

Modeling temporal functions with granular regression and fuzzy rules

244

Modeling temporal phenomena in variable environments with parametric models: An application to migrating salmon

245

Modeling temporal phenomena in variable environments with parametric models: An application to migrating salmon

246

Modeling temporal trends in bedload transport in gravel-bed streams using hierarchical mixed-effects models

247

Modeling temporal variability of soil CO2 emissions from an apple orchard in the Harran Plain of southeastern Turkey

248

Modeling temporal variations in multipolarized radar scattering from intertidal coastal wetlands

249

Modeling tensile response and flow localization effects in 316SS after exposure to spallation and fission irradiation environments

250

Modeling tensile response and flow localization effects in selected copper alloys

251

Modeling tensile strength of austenitic graded steel based on the strain gradient plasticity theory

252

Modeling tensile strength of oblique layer functionally graded austenitic steel

253

Modeling tephra dispersal in absence of wind: Insights from the climactic phase of the 2450 BP Plinian eruption of Pululagua volcano (Ecuador)

254

Modeling term proximity for probabilistic information retrieval models

255

Modeling ternary mixtures by mean-field theory of polyelectrolytes: Coupled Ginzburg–Landau and Swift–Hohenberg equations

256

Modeling Tetrachloroethylene Decomposition in Photosonolysis Reactor

257

Modeling TeV γ-rays from LS 5039: an active OB star at the extreme

258

Modeling texture and microstructural evolution in the equal channel angular extrusion process

259

Modeling texture and microstructural evolution in the equal channel angular extrusion process

260

Modeling texture evolution during ECAP of copper single crystal by crystal plasticity FEM

261

Modeling texture evolution during hot rolling of magnesium alloy AZ31

262

Modeling texture evolution during uni-axial deformation of Zircaloy-2

263

Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models

264

Modeling texture, twinning and hardening evolution during deformation of hexagonal materials Original Research Article

265

Modeling the (upper) solar atmosphere including the magnetic field Original Research Article

266

Modeling the [dV/dt] of the IGBT during inductive turn off

267

Modeling the ‘free carbon’ phase in amorphous silicon oxycarbide

268

Modeling the 100-kyr glacial–interglacial cycles

269

Modeling the 3D coronary tree for labeling purposes

270

Modeling the 3D kinematics of the eye in the geometric algebra framework

271

Modeling the 3-D radiation of anisotropically scattering media by two different numerical methods

272

Modeling the 3-D secular planetary three-body problem: Discussion on the outer υ Andromedae planetary system

273

Modeling the 3D structure and rhythmic growth responses to environment in dioecious yerba-mate

274

Modeling the 3D structure and rhythmic growth responses to environment in dioecious yerba-mate

275

Modeling the 8.2 ka event using a coupled atmosphere–ocean GCM

276

Modeling the 802.11 Distributed Coordination Function in Nonsaturated Heterogeneous Conditions

277

Modeling the abrasive wear characteristics of in-situ synthesized Al–4.5%Cu/TiC composites

278

Modeling the ac conductivity dispersion of mixed alkali germanate glasses

279

Modeling the acceleration and modulation of anomalous cosmic ray oxygen Original Research Article

280

Modeling the Acceleration of Chemical Reactions in a Shock Front

281

Modeling the acceleration zone in the riser of circulating fluidized beds

282

modeling the acceptance of hospital information systems among nurses: an extended technology acceptance model

283

Modeling the acclimation of activated sludge to a xenobiotic

284

Modeling the accumulation and dynamics of beaches on shore platforms

285

Modeling the activity and scaling factor of 129I in the primary coolant and CVCS resin of operating PWR

286

Modeling the activity of 129I and 137Cs in the primary coolant and CVCS resin of an operating PWR

287

MODELING THE ACTORS IN WATER SUPPLY SYSTEMS

288

MODELING THE ACTORS IN WATER SUPPLY SYSTEMS

289

Modeling the adoption rates of manufacturing technology innovations by small US manufacturers: a longitudinal investigation

290

Modeling the adsorption of dyes onto activated carbon by using experimental designs

291

Modeling the adsorption of mercury in the flue gas of sewage sludge incineration

292

Modeling the adsorption of metal ions (Cu2+, Ni2+, Pb2+) onto ACCs using surface complexation models

293

Modeling the adsorption of pure gases on coals with the SLD model Original Research Article

294

Modeling the Aerosol Extinction versus Backscatter Relationship for Lidar Applications: Maritime and Continental Conditions

295

Modeling the after-effects of a heliospheric traveling shock wave through the Earthʹs radiation belts Original Research Article

296

Modeling the age and age composition of late 19th century U.S. immigrants from Europe

297

Modeling the aggregation behavior of amphiphiles in the continuous phase of highly concentrated emulsions

298

Modeling the aggregative behavior of ants of the species Polyergus rufescens

299

Modeling the Agility of Education Departments with a Digital Transformation Approach

300

Modeling the aging kinetics of zirconia ceramics

301

Modeling the air–soil transport pathway of perfluorooctanoic acid in the mid-Ohio Valley using linked air dispersion and vadose zone models

302

Modeling the alfalfa stem nematode in irrigated alfalfa

303

Modeling the amorphous forming ability of Ti-based alloys with wide supercooled liquid regions and high hardness

304

Modeling the analytical response of optical fiber sensors for aromatic compounds determination

305

Modeling the anisotropic finite-deformation viscoelastic behavior of soft fiber-reinforced composites

306

Modeling the Arabidopsis seed shape by a cardioid: Efficacy of the adjustment with a scale change with factor equal to the Golden Ratio and analysis of seed shape in ethylene mutants

307

Modeling the atmospheric concentrations of individual volatile organic compounds

308

Modeling the atmospheric deposition and stormwater washoff of nitrogen compounds

309

Modeling the atmospheric fate and transport of mercury over North America: power plant emission scenarios

310

Modeling the atmospheric limb emission of CO2 at 4.3 μm in the terrestrial planets

311

Modeling the atmospheric transport and deposition of mercury to the Great Lakes

312

Modeling the atmospheric transport and deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans in North America

313

Modeling the atmospheric transport and outflow of polycyclic aromatic hydrocarbons emitted from China

314

Modeling the atomic structure of an amorphous Co25Nb75 alloy produced by mechanical alloying using an additive hard sphere model and RMC simulations

315

Modeling the atomic structure of an amorphous Co57Ti43 alloy produced by mechanical alloying using RMC simulations

316

Modeling the atomic structure of an amorphous Ni46Ti54 alloy produced by mechanical alloying using RMC simulations

317

Modeling the atomic structure of an amorphous Ni71Nb29 alloy produced by mechanical alloying using reverse Monte Carlo simulations

318

Modeling the austenite–ferrite diffusive transformation during continuous cooling on a mesoscale using Monte Carlo method Original Research Article

319

Modeling the auto-thermal performance of a thermophilic bioleaching heap employing mesophilic and thermophilic microbes

320

Modeling the Barriers of Indian Healthcare Supply Chain Management Using ISM

321

Modeling the bathtub shape hazard rate function in terms of reliability

322

Modeling the bathtub shape hazard rate function in terms of reliability

323

Modeling the Bauschinger effect for sheet metals, part I: theory

324

Modeling the Bauschinger effect for sheet metals, part II: applications

325

Modeling the behavior of disordered taxi drivers of Tehran for choosing passenger and destination

326

Modeling the Behavior of Fiber Reinforced Polymer-Confined Concrete Columns Exposed to Fire

327

Modeling the behavior of limestone particles in oxy-fuel CFB processes

328

Modeling the behavior of natural gas pipeline impacted by falling objects

329

Modeling the behavior of selenium in Pulverized-Coal Combustion systems

330

Modeling the behaviors of adsorption and biodegradation in biological activated carbon filters

331

Modeling the behaviour of science and technology: self-propagating growth in the diffusion process

332

Modeling the bid/ask spread: measuring the inventory-holding premium

333

Modeling the bifurcating flow in a CT-scanned human lung airway

334

Modeling the bifurcating flow in a human lung airway

335

Modeling the bifurcating flow in an asymmetric human lung airway

336

Modeling the binding affinities of β-secretase inhibitors: application to subsite specificity

337

Modeling the binding of fulvic acid by goethite: the speciation of adsorbed FA molecules

338

Modeling the biodegradation efficiency and growth of Pseudomonas alcaligenes utilizing 2,4 dichlorophenol as a carbon source Pre- and Post-exposure to UV radiation

339

Modeling the biodegradation efficiency and growth of Pseudomonas alcaligenes utilizing 2,4 dichlorophenol as a carbon source Pre- and Post-exposure to UV radiation

340

Modeling the biodegradation of phenolic compounds by microalgae

341

Modeling the bio-refinery industry in rural areas: A participatory approach for policy options comparison

342

Modeling the birth of a liquid market

343

Modeling the bit-level stochastic correlation for turbo decoding

344

Modeling the blocking phenomenon in JIT environment: An alternative scenario

345

Modeling the bloom dynamics of the polymorphic phytoplankter Phaeocystis globosa: impact of grazers and viruses

346

Modeling the bloom evolution and carbon flows during SOIREE: Implications for future in situ iron-enrichments in the Southern Ocean

347

Modeling the body/chair interaction – an integrative experimental–numerical approach

348

Modeling the brain–pituitary–gonad axis in salmon

349

Modeling the brand extensionsʹ influence on brand image

350

Modeling the broadband persistent emission of magnetars Original Research Article

351

Modeling the brown bear population in Slovenia: A tool in the conservation management of a threatened species

352

Modeling the brown bear population in Slovenia: A tool in the conservation management of a threatened species

353

Modeling the bubbling enhanced microfiltration for submerged hollow fiber membrane module Original Research Article

354

Modeling the buckling behavior of carbon nanotubes under simultaneous combination of compressive and torsional loads

355

Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites

356

Modeling the buckling of rectilinearly orthotropic truncated conical shells

357

Modeling the Bullying Prevention Program Preferences of Educators: A Discrete Choice Conjoint Experiment

358

Modeling the burden of cardiovascular disease in Turkey

359

Modeling the Burden of Cardiovascular Diseases in Iran from 2005 to 2025: The Impact of Demographic Changes

360

Modeling the business value of information technology

361

Modeling the business value of information technology

362

Modeling the butterfly: influence of lateral interactions and adsorption geometry on the voltammetry at (1 1 1) and (1 0 0) electrodes

363

Modeling the butterfly: the voltammetry of (√3×√3)R30° and p(2×2) overlayers on (111) electrodes

364

Modeling the BUX index by a novel stochastic differential equation

365

Modeling the C. elegans nematode and its environment using a particle system

366

Modeling the cadmium balance in Australian agricultural systems in view of potential impacts on food and water quality Original Research Article

367

Modeling the Calcium Signaling in Stomatal Guard Cells under the Action of Abscisic Acid

368

Modeling the cAMP-induced Allosteric Transition Using the Crystal Structure of CAP-cAMP at 2.1 Å Resolution

369

Modeling the cancer patient with genetically engineered mice: Prediction of toxicity from molecule-targeted therapies

370

Modeling the capacitive deionization batch mode operation for desalination

371

Modeling the capacity and level of service of urban transportation networks

372

Modeling The Capacity Factor of Analytes in Micellar Electrokinetic Chromatography Using Computational Descriptors

373

Modeling the capture probability and enhancing the photoconductive gain in quantum well infrared photodetectors (QWIPs)

374

Modeling the carbon and sulfur isotope compositions of marine sediments: Climate evolution during the Devonian

375

Modeling the carbon cycle of urban systems

376

Modeling the carbon cycle of urban systems

377

Modeling the carbon dynamics of the dryland ecosystems in Xinjiang, China from 1981 to 2007—The spatiotemporal patterns and climate controls

378

Modeling the carbon dynamics of the dryland ecosystems in Xinjiang, China from 1981 to 2007—The spatiotemporal patterns and climate controls

379

Modeling the carbon dynamics of the La Grande hydroelectric complex in northern Quebec

380

Modeling the carbon dynamics of the La Grande hydroelectric complex in northern Quebec

381

Modeling the caries-inhibitory effects of dental materials

382

Modeling the catalyst layer of a PEM fuel cell cathode using a dimensionless approach

383

Modeling the cation transport in an operating polymer electrolyte fuel cell (PEFC)

384

Modeling The Causality Relationships Between Gdp/Gni and Electricity Consumption According to Income Levels of Countries By Generalized Estimating Equations

385

Modeling the Causes of Business Failure Using Audit Variables: an Interpretive Structural Approach (a case study of agricultural firms in the Tehran Stock Exchange)

386

Modeling the Cell Cycle: Why Do Certain Circuits Oscillate?

387

Modeling the Cell Division Cycle: M-phase Trigger, Oscillations, and Size Control

388

Modeling the Chagas’ disease after stem cell transplantation

389

Modeling the challenges affecting the internationalization of the Persian Gulf Pro League

390

Modeling the change in soil organic carbon of grassland in response to climate change: Effects of measured versus modelled carbon pools for initializing the Rothamsted Carbon model

391

Modeling the characteristic types and heat release of stretched premixed impinging flames

392

Modeling the characterization of the plus fractions by using continuous distribution function

393

Modeling the charge compensation effect in silica-rich Na2O-K2O-Al2O3-SiO2 melts

394

Modeling the charge compensation effect in silica-rich Na2O-K2O-Al2O3-SiO2 melts

395

Modeling the charging of geosynchronous and interplanetary spacecraft using Nascap-2k Original Research Article

396

Modeling the chemical evolution of nitrogen oxides near roadways

397

Modeling the chemical reactions of ammonium dinitramide (ADN) in a flame

398

Modeling the Chinese language as an evolving network

399

Modeling the chiral resolution ability of highly sulfated β-cyclodextrin for basic compounds in electrokinetic chromatography

400

Modeling the chloride concentration profile in migration test based on general Poisson Nernst Planck equations and pore structure hypothesis

401

Modeling the Chlorine Gas Dispersion in the Water Treatment Plant

402

Modeling the choice to switch from fuelwood to electricity: Implications for giant panda habitat conservation

403

Modeling the Circle of Willis Using Electrical Analogy Method under both Normal and Pathological Circumstances

404

Modeling the City Distribution System Reliability with Bayesian Networks to Identify Influence Factors

405

Modeling the climate-induced changes of lake ecosystem structure under the cascade impacts of hurricanes and droughts

406

Modeling the climate-induced changes of lake ecosystem structure under the cascade impacts of hurricanes and droughts

407

Modeling the clustering in citation networks

408

Modeling the CO gas response of PEDOT:PSS/Fe(salen) thin film for a gas sensor

409

Modeling the CO2 emissions and energy saved from new energy vehicles based on the logistic-curve

410

Modeling the CO2 emissions from battery electric vehicles given the power generation mixes of different countries

411

Modeling the coalescence of heterogenous amorphous particles

412

Modeling the coastal ocean over a time period of several weeks

413

Modeling the cod larvae drift in the Bornholm Basin in summer 1994

414

Modeling the cohesive energy and melting point of nanoparticles by their average coordination number

415

Modeling the collapse of coiled material

416

Modeling the College Application Decision Process in a Land-Grant University

417

Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

418

Modeling the combined conduction—Air infiltration through diffusive building envelope

419

Modeling the combined effect of nutrients and pyrene on the plankton population: Validation using mesocosm experiment data and scenario analysis

420

Modeling the combined effect of nutrients and pyrene on the plankton population: Validation using mesocosm experiment data and scenario analysis

421

Modeling the combined effect of temperature and organic modifier content on reversed-phase chromatographic retention: Effectiveness of derived models in isocratic and isothermal mode retention prediction

422

Modeling the combined effects of pH, temperature and ascorbic acid concentration on the heat resistance of Alicyclobacillus acidoterrestis

423

Modeling the combined effects of temperature and frequency on fatigue crack growth of chlorinated polyvinyl chloride (CPVC)

424

Modeling the combined impact of moisture and char shrinkage on the pyrolysis of a biomass particle☆

425

Modeling the Communication Technology Industry's Innovation Ecosystem using an Adaptive Neuro Fuzzy Inference System

426

Modeling the competition among air-travel itinerary shares: GEV model development

427

Modeling the competition between floc-forming and filamentous bacteria in activated sludge waste water treatment systems—I. Evaluation of mathematical models based on kinetic selection theory

428

Modeling the competition between floc-forming and filamentous bacteria in activated sludge waste water treatment systems—II. A prototype mathematical model based on kinetic selection and filamentous backbone theory

429

Modeling the Competition between Public Debt Creditors in Iran: An Application of Bankruptcy Games

430

Modeling the Competitive Advantage of Iranian Soccer Clubs Based on the Team Reputation Considering the Satisfaction Level of Fans of the Selected Teams

431

Modeling the competitive effect of ammonium oxidizers and heterotrophs on the degradation of MTBE in a packed bed reactor

432

Modeling the competitive effect of phosphate, sulfate, silicate, and tungstate anions on the adsorption of molybdate onto goethite

433

Modeling the Competitive Facility Location Problem in a Symmetric Arena

434

Modeling the competitive market efficiency of Egyptian companies: A probabilistic neural network analysis

435

Modeling the Completion Time of Public School Building Projects Using Neural Networks

436

Modeling the complex hatching and development of Aedes aegypti in temperate climates

437

Modeling the complex hatching and development of Aedes aegypti in temperate climates

438

Modeling the complexity of different, recently deglaciated soil landscapes as a function of map scale

439

Modeling the complexity of post-treatment drinking: Itʹs a rocky road to relapse

440

Modeling the component linear and nonlinear blending properties in a two-stage mixture experiment Original Research Article

441

Modeling the compressive deformation of metal micro-textured thermal interface materials using SEM geometry reconstruction

442

Modeling the compressive properties of glass fiber reinforced epoxy foam using the analysis of variance approach

443

MODELING THE COMPRESSIVE STRENGTH OF CONCRETE MADE WITH EXPANDED PERLITE POWDER

444

Modeling the compressive strength of geopolymeric binders by gene expression programming-GEP

445

Modeling the compressive strength of molasses–cement sand system using design of experiments and back propagation neural network

446

Modeling the concentration of suspended particles by fuzzy inference system (FIS) and adaptive neuro-fuzzy inference system (ANFIS) techniques: A case study in the metro stations

447

Modeling the concentration–response function of the herbicide dinoseb on Daphnia magna (survival time, reproduction) and Pseudokirchneriella subcapitata (growth rate)

448

Modeling the concept of majority opinion in group decision making

449

Modeling the conditional distribution of interest rates as a regime-switching process

450

Modeling the connection between self-reported trauma and dissociation in a student sample

451

Modeling the Consequences of Accidents during the Process of Transferring Waste Thinner from the Paint Shop of an Automotive Industry using ALOHA Software

452

Modeling the Consequences of Benzene Leakage from Tank using ALOHA in Tar Refining Industrial of Kerman, Iran

453

Modeling the consequences of local kinematics of the first body on friction and on third body sources in wear

454

Modeling the Consequences of the Auditors’ Leaving the Public Accounting Profession: Is There a Brain Drain in Auditing?

455

Modeling the constitutive behavior of layered composites with evolving cracks

456

Modeling the constitutive behavior of RAFM steels under irradiation conditions

457

Modeling the constitutive relationship of Cr20Ni25Mo4Cu superaustenitic stainless steel during elevated temperature

458

Modeling the Container Selection for Freight Transportation: Case Study of Iran

459

Modeling the contribution of ephemeral gully erosion under different soil managements: A case study in an olive orchard microcatchment using the AnnAGNPS model

460

Modeling the contribution of point sources and non-point sources to Thachin River water pollution Original Research Article

461

Modeling the contribution of specific grinding pressure for the calculation of HPGR product size distribution

462

Modeling the contribution of speeding and impaired driving to insurance claim counts and costs when contributing factors are unknown

463

Modeling the cooling due to CO2 increases in the mesosphere and lower thermosphere

464

Modeling the coordination chemistry of chitosan: Synthesis and characterization of a nickel(II) complex with a 2-aminoglucose Schiff-base ligand

465

Modeling the co-precipitation of silica and calcium oxalate in sugar solutions Original Research Article

466

Modeling the correlation between microstructure and the properties of the Ti–6Al–4V alloy based on an artificial neural network

467

Modeling the correlations of crude oil properties based on sensitivity based linear learning method

468

Modeling the correlations of crude oil properties based on sensitivity based linear learning method

469

Modeling the cost of management options for stage I nonseminomatous germ cell tumors: a decision tree analysis: Link RE, Allaf ME, Pili R, Kavoussi LR, James Buchanan Brady Urological Institute, Sidney Kimmel Comprehensive Cancer Center at Johns Hopkins,

470

Modeling the cost of shut-in production and the value of information in the Gulf of Mexico

471

Modeling the costs of bridge rehabilitation

472

Modeling the coupled effects of temperature and fineness of Portland cement on the hydration kinetics in cement paste

473

Modeling the coupled extracellular and intracellular environments in mammalian cell culture

474

Modeling the coupled torsional and lateral vibrations of unbalanced rotors Original Research Article

475

Modeling the coupling between free and forced convection in a vertical permeable slot: Implications for the heat production of an Enhanced Geothermal System

476

Modeling the coupling of reaction kinetics and hydrodynamics in a collapsing cavity

477

Modeling the coupling of reaction kinetics and hydrodynamics in a collapsing cavity

478

Modeling the covarion hypothesis of nucleotide substitution

479

Modeling the cracking process of rocks from continuity to discontinuity using a cellular automaton

480

Modeling the cracks opening–closing and possible remedial sawing operation of AAR-affected dams

481

Modeling the creep behavior of 2024-T3 Al alloy

482

Modeling the creep behavior of Mg alloys with and without short-fiber reinforcement

483

Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate Original Research Article

484

Modeling the crystallization of magnesium ammonium phosphate for phosphorus recovery

485

Modeling the crystallographic texture changes in aluminum alloys during recrystallization Original Research Article

486

Modeling the current and future capacity of water resources to meet water demands in the Ebro basin

487

Modeling the current density in sol–gel electrophoretic deposition of titania thin film

488

Modeling the current distribution during transcranial direct current stimulation

489

Modeling the customer in electronic commerce

490

Modeling the cyanide heap leaching of cupriferous gold ores Part I: Introduction and interpretation of laboratory column leaching data

491

Modeling the cyanide heap leaching of cupriferous gold ores Part I: Introduction and interpretation of laboratory column leaching data

492

Modeling the cyclic loading response of sea ice

493

Modeling the cyclic response of fiber reinforced concrete joints

494

Modeling the cyclic swelling pressure of mudrock using artificial neural networks

495

Modeling the daily suspended sediment concentration in a hyperconcentrated river on the Loess Plateau, China, using the Wavelet–ANN approach

496

Modeling the Daily Volatility of Oil, Gold, Dollar, Bitcoin and Iranian Stock Markets: An Empirical Application of a Nonlinear Space State Model

497

Modeling the damping properties of perforated screens traversed by a bias flow and backed by a cavity at low Strouhal number

498

Modeling the Decision-making Method of Imam Khomeini for the Officials and Managers of the Islamic Republic of Iran

499

Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip Original Research Article

500

Modeling the deformation textures and microstructural evolutions of a Fe–Mn–C TWIP steel during tensile and shear testing

501

Modeling the degradation of Portland cement pastes by biogenic organic acids

502

Modeling the Dehydration of tert-Butyl Alcohol and Avoidance of the Formation of Oligomers

503

Modeling the demand for alcoholic beverages and advertising specifications

504

Modeling the demand for money in the industrial and commercial companies sector in the United Kingdom

505

Modeling the demand–price relations in a high-frequency foreign exchange market

506

Modeling the density–area relationship in a dynamic landscape: an examination for the beetle Tetraopes tetraophthalmus and a generalized model

507

Modeling the density–area relationship in a dynamic landscape: an examination for the beetle Tetraopes tetraophthalmus and a generalized model

508

Modeling the Dependence between Number of Trials and Success Probability in Beta-Binomial–Poisson Mixture Distributions

509

Modeling the Dependence between the Number of Trials and the Success Probability in Binary Trials

510

Modeling the dependence of the coefficient of restitution on the impact velocity in elasto-plastic collisions

511

Modeling the depletion of dissolved oxygen in a lake due to algal bloom: Effect of time delay

512

Modeling the deposition of bioaerosols with variable size and shape in the human respiratory tract – A review

513

Modeling the deposition of turbidite systems with Cellular Automata numerical simulations: A case study in the Brazilian offshore

514

Modeling the desalination of saline water by using bacteria and marsh plants Original Research Article

515

Modeling the design and performance of progressing cavity pump using 3-D vector approach

516

Modeling the design quality competition for durable products

517

Modeling the design quality competition for durable products

518

Modeling the desire to telecommute: The importance of attitudinal factors in behavioral models

519

Modeling the deterioration of hydrated cement systems exposed to frost action: Part 1: Description of the mathematical model

520

Modeling the Determinants of Customer Mindset Towards Online Food Ordering

521

MODELING THE DETERMINANTS OF PRIVATE HEALTH SPENDING ACROSS SUB-SAHARAN AFRICAN COUNTRIES: A MACRO LEVEL STUDY

522

Modeling the determinants of spiritual capital in companies based on the grounded theory and structural equation modeling (SEM)

523

Modeling the Developing Mind: From Structure to Change

524

Modeling the development of Almen strip curvature in vibratory finishing

525

Modeling the development of biofilm density including active bacteria, inert biomass, and extracellular polymeric substances

526

Modeling the development of char structure during the rapid heating of pulverized coal

527

Modeling the Development of Future Managers Based on the Management of Talent and Personality Types in the Digital Age (Case Study: Social Security Organization of Iran)

528

Modeling the development of marine terraces on tectonically mobile rock coasts

529

Modeling the dewatering and depressurization of the Lihir open-pit gold mine, Papua New Guinea

530

Modeling the Differential Fitness of Cyanobacterial Strains whose Circadian Oscillators have Different Free-running Periods: Comparing the Mutual Inhibition and Substrate Depletion Hypotheses

531

Modeling the diffusion of carbon monoxide and other gases from the paper wrapper of a cigarette during puffing

532

Modeling the diffusion of Na+ in compacted water-saturated Na-bentonite as a function of pore water ionic strength

533

Modeling the diffusion of scientific publications

534

Modeling the diffusion–adsorption kinetics of 1-methylcyclopropene (1-MCP) in apple fruit and non-target materials in storage rooms Original Research Article

535

Modeling the diiron(II) ferroxidase complex in human H ferritin

536

Modeling the discharge characteristics of rectangular flights in a flighted rotary drum

537

Modeling the discharge of cuttings and drilling fluids in a deep-water environment

538

Modeling the discoloration of a mixture of reactive textile dyes by commercial laccase

539

Modeling the dispersion effects of contractile fibers in smooth muscles

540

Modeling the dissociation and ionization of a sputtered organic molecule

541

Modeling the distribution of four vegetation alliances using generalized linear models and classification trees with spatial dependence

542

Modeling the distribution of four vegetation alliances using generalized linear models and classification trees with spatial dependence

543

Modeling the distribution of illicit oily discharges detected by aerial surveillance in western Canadian marine waters

544

Modeling the distribution of isotopic ratios in geochemical reservoirs

545

Modeling the distribution of Nd isotopes in the oceans using an ocean general circulation model

546

Modeling the distribution of nitrogen species and isotopes in the water column of the Black Sea

547

Modeling the distribution of phonon density for designing high quality thermal resonators

548

Modeling the distribution of pollutants caused by gas refinery flares with AERMOD software (South Pars Gas Complex Company)

549

Modeling the distributions of species and communities in Great Smoky Mountains National Park

550

Modeling the diurnal profile of ambulatory monitored blood pressure and heart rate

551

Modeling the diurnal variability of effective albedo for cities

552

Modeling the driverʹs behavior on second-order macroscopic models of vehicular traffic flow

553

Modeling the droplet break-up based on drawing the shape using velocity gradient and normal vector

554

Modeling the droplet deposition behavior on a single particle in fluidized bed spray granulation process

555

Modeling the Drying of a High-Moisture Solid with an Artificial Neural Network

556

Modeling the dry-weather tidal cycling of fecal indicator bacteria in surface waters of an intertidal wetland

557

Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach

558

Modeling the ductile fracture behavior of an aluminum alloy 5083-H116 including the residual stress effect

559

Modeling the ductile fracture process of void coalescence by void-sheet formation

560

Modeling the ductile fracture process of void coalescence by void-sheet formation

561

Modeling the ductile–brittle failure mode transition in rock cutting

562

Modeling the dynamic behavior of shape memory alloys

563

Modeling the dynamic behavior of supercapacitors using impedance spectroscopy

564

Modeling the dynamic changes in concentrations of γ-hexachlorocyclohexane (γ-HCH) in Tianjin region from 1953 to 2020

565

Modeling the dynamic composition of engineered cartilage

566

Modeling the Dynamic Correlations among Cryptocurrencies: New Evidence from Multivariate Factor Stochastic Volatility Model

567

Modeling the dynamic effects of ice shedding on spacer dampers

568

Modeling the dynamic habitat and breeding population of Southwestern Willow Flycatcher

569

Modeling the dynamic habitat and breeding population of Southwestern Willow Flycatcher

570

Modeling the Dynamic Recrystallization by Using Cellular Automaton: The Current Status, Challenges and Future Prospects, a Review

571

Modeling the dynamic recrystallization in austenitic stainless steel using cellular automaton method

572

Modeling the dynamic recrystallization under multi-stage hot deformation Original Research Article

573

Modeling the dynamic relation between science and technology in nanotechnology

574

Modeling the dynamical impact of HIV on the immune system: Viral clearance, infection, and AIDS

575

Modeling the dynamics and emergence of a multispecies weed seed bank with species traits

576

Modeling the dynamics and emergence of a multispecies weed seed bank with species traits

577

Modeling the dynamics and export of dissolved organic matter in the Northeastern U.S. continental shelf

578

modeling the dynamics and forecasting the fourth peak of covid-19 in iran using pso algorithm

579

Modeling the dynamics of a geothermal reservoir fed by gravity driven flow through overstanding saturated rocks

580

Modeling the dynamics of an elastic rod with intrinsic curvature and twist using a regularized Stokes formulation

581

Modeling the Dynamics of an Infrastructure Project

582

Modeling the dynamics of atmospheric mercury over the mediterranean sea: The MAMCS project

583

Modeling the dynamics of colliding particles in a turbulent shear flow

584

Modeling the dynamics of concurrent computing systems

585

Modeling the Dynamics of Coronavirus Disease Pandemic Coupled with Fear Epidemics

586

Modeling the dynamics of disaster evolution along causality networks with cycle chains

587

Modeling the dynamics of inhomogeneous natural rotifer populations under toxicant exposure

588

Modeling the dynamics of inhomogeneous natural rotifer populations under toxicant exposure

589

Modeling the dynamics of landscape structure in Asia’s emerging desakota regions: a case study in Shenzhen

590

Modeling the Dynamics of Magnetic Semilevitation Melting

591

Modeling the dynamics of membrane structure formation in quenched polymer solutions

592

Modeling the dynamics of nutrient limited consumer populations using constant elasticity production functions

593

Modeling the dynamics of nutrient limited consumer populations using constant elasticity production functions

594

Modeling the dynamics of oxygen consumption upon riverbank filtration by a stochastic–convective approach

595

Modeling the dynamics of regulated resource systems: a fishery example

596

Modeling the dynamics of the integrated earth system and the value of global ecosystem services using the GUMBO model

597

Modeling the dynamics of the multiphase fluid in the parabolic-trough solar steam generating systems

598

Modeling the dynamics of the soil pore-size distribution

599

Modeling the dynamics of three functional groups of macroalgae in tropical seagrass habitats

600

Modeling the dynamics of three functional groups of macroalgae in tropical seagrass habitats

601

Modeling the earth for oil exploration : Edited by Klaus Helbig Final report of the CECʹs Geoscience I program 1990–1993. Pergamon. 795.pp. ISBN 0 08 042419.8

602

Modeling the ecological impact of heavy metals on aquatic ecosystems: a framework for the development of an ecological model

603

Modeling the economics of greenhouse gas abatement: An overlapping generations perspective

604

Modeling the Economics of Testing: A DFT Perspective

605

Modeling the eco-physiology of the purple mauve stinger, Pelagia noctiluca using Dynamic Energy Budget theory

606

Modeling the ecosystem dynamics of the Barents sea including the marginal ice zone: I. Physical and chemical oceanography

607

Modeling the effect of a microtubule swirl on fast axonal transport

608

Modeling the effect of abrupt changes in nitrogen availability on lettuce growth, root–shoot partitioning and nitrate concentration

609

Modeling the effect of abrupt ocean circulation change on marine reservoir age

610

Modeling the effect of acylated homoserine lactone antagonists in Pseudomonas aeruginosa

611

Modeling the Effect of Advertising and Subsidy Transfer in a Three-Level Channel Using Game Theory

612

Modeling the Effect of Agility on Organizational and Social Sustainability Mediated by Organizational Culture (Case Study: Young Principals and Deputies of Public Schools in Babol)

613

Modeling the effect of Al3Sc precipitates on the yield stress and work hardening of an Al–Mg–Sc alloy Original Research Article

614

Modeling the effect of antecedent soil water storage on water and heat status in seasonally freezing and thawing agricultural soils

615

Modeling the effect of atmospheric gravity waves on Saturn’s ionosphere

616

Modeling the Effect of Binding Kinetics in Spatial Drug Distribution in the Brain

617

Modeling the effect of biofilm formation on reverse osmosis performance: Flux, feed channel pressure drop and solute passage

618

Modeling the effect of blanching conditions on the texture of potato strips Original Research Article

619

Modeling the effect of changing selective pressures on polymorphism and divergence

620

Modeling the Effect of Chemotherapy on Melanoma B16F10 in Mice Using Cellular Automata and Genetic Algorithm in Tapered Dosage of FBS and Cisplatin

621

Modeling the effect of clay drapes on pumping test response in a cross-bedded aquifer using multiple-point geostatistics

622

Modeling the effect of climate change on U.S. state-level buildings energy demands in an integrated assessment framework

623

Modeling the effect of climate change to the potential invasion range of Piper aduncum Linnaeus

624

Modeling the Effect of Cognitive and Metacognitive Strategies, and L1 Reading Ability on Reading Comprehension in an EFL Context through Structural Equation Modeling

625

Modeling the effect of compacted graphite iron microstructure on cutting forces and tool wear

626

Modeling the effect of composition and thermal quenching on the fracture behavior of borosilicate glass

627

Modeling the effect of cooling system on the shrinkage and temperature of the polymer by injection molding

628

Modeling the effect of cost factors on productivity growth using data envelopment analysis

629

Modeling the effect of degradative pathway associated with Nodes of Ranvier on axonal transport drug delivery

630

Modeling the effect of different infrared treatment on B. cereus in cardamom seeds and using genetic algorithm-artificial neural network

631

Modeling the effect of EGR on combustion and pollution of dual fuel engines with flow field model

632

Modeling the effect of environmental corporate governance rating in the pricing information asymmetry

633

Modeling the effect of environmental factors on evaporative water loss in asphalt emulsions for chip seal applications

634

Modeling the effect of external electric field and current on the stochastic dynamics of ATPase nano-biomolecular motors

635

Modeling the effect of extrusion parameters on density of biomass pellet using artificial neural network

636

Modeling the effect of free water on enzyme activity in immobilized lipase-catalyzed reactions in organic solvents

637

Modeling the Effect of Freestream Turbulence on Unsteady Boundary Layer Flow

638

Modeling the effect of freshwater inflows on the development of spring blooms in an estuarine embayment

639

Modeling the effect of glycerol on the moisture sorption behavior of whey protein edible films Original Research Article

640

Modeling the effect of grain clustering on the intergranular crack-propagation behaviour in polycrystalline materials

641

Modeling the effect of growth rate and survivability trade-offs on species coexistence and spatial topology at a traveling invasive wave-front

642

Modeling the effect of growth rate and survivability trade-offs on species coexistence and spatial topology at a traveling invasive wave-front

643

Modeling the Effect of High Calorie Diet on the Interplay between Adipose Tissue, Inflammation, and Diabetes

644

Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete

645

Modeling the effect of humidity on the threshold friction velocity of coal particles

646

Modeling the effect of inbreeding among founders in linkage analysis

647

Modeling the effect of information quality on risk behavior change and the transmission of infectious diseases

648

Modeling the effect of inoculum size and acid adaptation on growth/no growth interface of Escherichia coli O157:H7

649

Modeling the effect of iodide distribution on ozone deposition to seawater surface

650

Modeling the Effect of Lameness on Culling of Dairy Cows in Tehran Province

651

Modeling the effect of layered volcanic material on magma reservoir failure and associated deformation, with application to Long Valley caldera, California

652

Modeling the effect of light generation and light attenuation properties on the performance of phosphors used in medical imaging radiation detectors

653

Modeling the effect of light generation and light attenuation properties on the performance of phosphors used in medical imaging radiation detectors

654

Modeling the effect of light on whole-stream respiration

655

Modeling the effect of light on whole-stream respiration

656

Modeling the effect of mesoscale randomness on concrete fracture

657

Modeling the effect of microstructural features on the nucleation of creep cavities

658

Modeling the effect of microstructure on the coefficients of thermal expansion of pyrolytic carbon

659

Modeling the effect of microstructure on the elastic properties of pyrolytic carbon

660

Modeling the effect of mixing in biodiesel production

661

Modeling the effect of mould wall roughness on the melt flow simulation in casting process

662

Modeling the effect of nitrogen fixation on carbon and nitrogen fluxes at BATS

663

Modeling the effect of node synchronization times in ultra-wideband wireless networks

664

Modeling the effect of operator and passenger characteristics on the fatality risk of motorcycle crashes

665

Modeling the Effect of Packaging on Canned Goods Purchasing Decisions among Job Subcultures

666

Modeling the effect of packing density on filtration performances in hollow fiber microfiltration module: A spatial study of cake growth

667

Modeling the effect of particle clustering on the mechanical behavior of SiC particle reinforced Al matrix composites

668

Modeling the effect of particle size on the activation energy and ignition temperature of metallic nanoparticles

669

Modeling the Effect of Personality Traits, Enjoyment, and Sports Commitment on Sports Motivation Mediated by Competitive Anxiety

670

Modeling the Effect of P-N Junction Depth on the Output of Planer and Rectangular Textured Solar Cells

671

Modeling the effect of pressure and temperature on the hydrocracking of heavy crude oil by the continuous kinetic lumping approach Original Research Article

672

Modeling the effect of progressive grain-size sorting on the scale dependence of back-barrier tidal basin morphology

673

Modeling the effect of Pt dispersion and temperature during anaerobic regeneration of a lean NOx trap catalyst

674

Modeling the effect of quarantine and hospitalization on the spread of COVID-19 during the toughest period of the pandemic

675

Modeling the effect of Russian wheat aphid, Diuraphis noxia (Mordvilko) and weeds in winter wheat as guide to management

676

Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces

677

Modeling the effect of social factors on improving biodiversity protection

678

Modeling the effect of solvation on solute retention in reversed-phase liquid chromatography

679

Modeling the effect of solvation on solute retention in reversed-phase liquid chromatography

680

Modeling the effect of storage temperature on the respiration rate and texture of fresh cut pineapple Original Research Article

681

Modeling the effect of stratification on cemented layer formation in sulfide-bearing mine tailings

682

Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization

683

Modeling the effect of temperature and high hydrostatic pressure on the proteolytic activity of kiwi fruit juice Original Research Article

684

Modeling the effect of temperature on growth of Salmonella in chicken Original Research Article

685

Modeling the effect of temperature on ionic transport in cementitious materials

686

Modeling the effect of temperature on the growth rate and lag phase of Penicillium expansum in apples

687

Modeling the effect of temperature on the wear resistance of metals reinforced with ceramic particles Original Research Article

688

Modeling the effect of temperature, solar radiation and salinity on Bolboschoenus maritimus sequestration of mercury

689

Modeling the effect of temperature, solar radiation and salinity on Bolboschoenus maritimus sequestration of mercury

690

Modeling the effect of the striker geometry on the wave propagation pattern in the Split-Hopkinson pressure bar test using the discrete element method

691

Modeling the effect of three soil and water conservation practices in Tigray, Ethiopia

692

Modeling the effect of tool edge radius on contact zone in nanomachining

693

Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31

694

Modeling the effect of variable work piece hardness on surface roughness in an end milling using multiple regression and adaptive Neuro fuzzy inference system

695

Modeling the effect of varying spectra on multi junction A-SI solar cells Original Research Article

696

Modeling the effect of voxel resolution on the accuracy of phantom grain ensemble statistics

697

Modeling the effect of wall capacitance on the dynamics of an exothermic reaction system in a batch reactor

698

Modeling the Effect of Water Diversion on the Temperature of Mountain Streams

699

Modeling the Effective Implementation of Gardner’s Top Five Minds in Education of Student Teachers in Farhangian University, Kerman, Iran

700

Modeling the Effectiveness of Ozone as a Water Disinfectant Using an Artificial Neural Network

701

Modeling the effectiveness of U(VI) biomineralization in dual-porosity porous media

702

Modeling the effects of a faint dust coma on asteroid spectra

703

Modeling the effects of a partial residue mulch on runoff using a physically based approach

704

Modeling the effects of a solid barrier on pollutant dispersion under various atmospheric stability conditions

705

Modeling the effects of a speed limit reduction on traffic-related elemental carbon (EC) concentrations and population exposure to EC

706

Modeling the effects of abrasive size, surface oxidizer concentration and binding energy on chemical mechanical polishing at molecular scale

707

Modeling the effects of adsorbent dose and particle size on the adsorption of reactive textile dyes by fly ash Original Research Article

708

Modeling the effects of agricultural production. An integrated economic and environmental analysis using farm account statistics and GIS

709

Modeling the effects of biodiesel-diesel fuel blends on CO2 emission of a diesel engine by response surface methodology

710

Modeling the effects of Bunium persicum (Black Zira) essential oil, pH, inoculums size and temperature on the growth of Listeria monocytogenes

711

Modeling the effects of calcination conditions on the physical and chemical properties of transition alumina catalysts

712

Modeling the effects of changes made in Sistan’s water resources system using WEAP

713

Modeling the effects of cohesive energy for single particle on the material removal in chemical mechanical polishing at atomic scale

714

Modeling the effects of column packing quality and residence time changes on protein monomer/aggregate separation

715

Modeling the effects of concentration history on the slow desorption of trichloroethene from a soil at 100% relative humidity

716

Modeling the effects of conservation practices on stream health Original Research Article

717

Modeling the effects of controlled drainage, N rate and weather on nitrate loss to subsurface drainage

718

Modeling the effects of cooling rate, hydrogen content, grain refiner and modifier on microporosity formation in Al A356 alloys

719

Modeling the effects of cooling rate, hydrogen content, grain refiner and modifier on microporosity formation in Al A356 alloys

720

Modeling the effects of crop patterns and management scenarios on N and P loads to surface water and groundwater in a semi-humid catchment (West Africa)

721

Modeling the effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method

722

Modeling the effects of dispersal and patch size on predicted fisher (Pekania [Martes] pennanti) distribution in the U.S. Rocky Mountains

723

Modeling the effects of distance in single-conductor power cables in a three-phase power system

724

Modeling the effects of ecological engineering on ecosystem health of a shallow eutrophic Chinese lake (Lake Chao)

725

Modeling the effects of ecological engineering on ecosystem health of a shallow eutrophic Chinese lake (Lake Chao)

726

Modeling the effects of electrical conductivity of the head on the induced electric field in the brain during magnetic stimulation

727

Modeling the effects of elevation data resolution on the performance of topography-based watershed runoff simulation

728

Modeling the Effects of Emphasis and Question on Fundamental Frequency Contours of Cantonese Utterances

729

Modeling the Effects of Entrepreneurship Atmosphere on the Tendency of Agricultural Students for Beginning Creative Businesses

730

Modeling the effects of fouling on full-scale reverse osmosis processes

731

Modeling the Effects of Geometric Asymmetry on Aero-heating of the Ablative Noses

732

Modeling the effects of health on economic growth

733

Modeling the Effects of Helminth Infection on the Transmission Dynamics of Mycobacterium tuberculosis under Optimal Control Strategies

734

Modeling the effects of herbivores on the abundance of forest overstory states using a state-transition approach in the upper Grande Ronde River Basin, Oregon, USA

735

Modeling the effects of high radiative heat fluxes on intumescent material decomposition

736

Modeling the effects of historical vegetation change on near-surface atmosphere in the northern Chihuahuan Desert

737

Modeling the effects of hole distribution in perforated aluminum sheets I: representative unit cells

738

Modeling the effects of hole distribution in perforated aluminum sheets II: minimum strength failure paths

739

Modeling the effects of including/excluding attributes in choice experiments on systematic and random components

740

Modeling the effects of initial nitrogen content and temperature on fermentation kinetics of hard cider Original Research Article

741

Modeling the effects of intellectual capital components on the economic competitiveness, and assessing its consequences using a fuzzy cognitive map

742

Modeling the effects of introducing timber sales into volume-based tenure agreements

743

Modeling the effects of ionic strength on ionization parameters for a soil fulvic acid at low concentrations Original Research Article

744

Modeling the Effects of Land Use Change on the Water Temperature in Unregulated Urban Streams

745

Modeling the effects of macroeconomic variables on the stock market: An Application of Non-linear Distributed Auto-regression Model

746

Modeling the effects of macrophyte growth and decomposition on the nutrient budget in Shallow Lakes

747

Modeling the effects of material non-linearity using moving window micromechanics

748

Modeling the Effects of Media on Affective Commitment to Strategy Implementation

749

Modeling the effects of meteorology on ozone in Houston using cluster analysis and generalized additive models

750

Modeling the effects of nuclear environments on crevice corrosion of pure nickel by coupling of phase and polarization behavior Original Research Article

751

Modeling the effects of operating conditions on fuel and environmental costs for a 310 MW boiler firing fuel oil

752

Modeling the effects of oxidizer, complexing agent and inhibitor on material removal for copper chemical mechanical polishing

753

Modeling the effects of particle deformation in chemical mechanical polishing

754

Modeling the effects of pelleting on the logistics of distillers grains shipping

755

Modeling the effects of pitch-angle scattering processes on the transport of solar energetic particles along the interplanetary magnetic field Original Research Article

756

Modeling the effects of prior exfoliation corrosion on fatigue life of aircraft wing skins

757

Modeling the effects of process conditions on the accumulated lethality values of thermally processed pickled carrots

758

Modeling the effects of pumping wells in spring management: The case of Scirca spring (central Apennines, Italy)

759

Modeling the effects of reactor wall reaction on isothermal CVI process of C/SiC composites

760

Modeling the effects of residual stresses on defects in welds of steel frame connections

761

Modeling the effects of shear on the evolution of the holes in the condensational clouds of Venus

762

Modeling the effects of ship emissions on coastal air quality: A case study of southern California

763

Modeling the effects of social impact on epidemic spreading in complex networks

764

Modeling the effects of sodium chloride on degradation of chloramphenicol in aquaculture pond sediment

765

Modeling the effects of solution temperature and concentration during sulfate attack on cement mortars

766

Modeling the effects of surface roughness on the emissivity of aluminum alloys

767

Modeling the effects of temperature and moisture on soil enzyme activity: Linking laboratory assays to continuous field data

768

Modeling the effects of temperature and moisture on soil enzyme activity: Linking laboratory assays to continuous field data

769

Modeling the effects of temperature on growth and persistence of tree species: A critical review of tree population models

770

Modeling the effects of temperature on growth and persistence of tree species: A critical review of tree population models

771

Modeling the effects of the engineered barriers of a radioactive waste repository by Monte Carlo simulation

772

Modeling the effects of the operational parameters on H2 composition in a biomass fluidized bed gasifier

773

Modeling the effects of the Sloping Land Conversion Program on terrestrial ecosystem carbon dynamics in the Loess Plateau: A case study with Ansai County, Shaanxi province, China

774

Modeling the effects of the Sloping Land Conversion Program on terrestrial ecosystem carbon dynamics in the Loess Plateau: A case study with Ansai County, Shaanxi province, China

775

Modeling the effects of the vertical temperature gradient in the furnace in an edge-defined film-fed growth technique

776

Modeling the effects of thermal and mechanical load cycling on a C/SiC composite in oxygen/argon mixtures Original Research Article

777

Modeling the effects of thinning on bark beetle impacts and wildfire potential in the Blue Mountains of eastern Oregon

778

Modeling the effects of toxicants on a fish population in a spatially heterogeneous environment: I. Behavior of the unstressed, spatial model Original Research Article

779

Modeling the effects of toxicants on a fish population in a spatially heterogeneous environment: II. Lethal effects Original Research Article

780

Modeling the Effects of Transportation Patterns on Land Use Patterns of Tehran City

781

Modeling the effects of traveler information on freeway origin–destination demand prediction

782

Modeling the effects of type and concentration of organic modifiers, column type and chemical structure of analytes on the retention in reversed phase liquid chromatography using a single model

783

Modeling the effects of ultraviolet radiation on estuarine phytoplankton production: impact of variations in exposure and sensitivity to inhibition

784

Modeling the effects of varying data quality on trend detection in environmental monitoring

785

Modeling the effects of vasculature evolution on early brain tumor growth

786

Modeling the effects of vegetation on Mediterranean climate during the Roman Classical Period: Part I: Climate history and model sensitivity

787

Modeling the effects of vegetation on Mediterranean climate during the Roman Classical Period: Part II. Model simulation

788

Modeling the effects of VOC and NOX emission sources on ozone formation in Houston during the TexAQS 2000 field campaign

789

Modeling the effects of water stress and temperature on germination of Lactuca serriola L. seeds

790

Modeling the effects of wave climate and sediment supply variability on large-scale shoreline change

791

Modeling the effects of yarn material properties and friction on the ballistic impact of a plain-weave fabric

792

Modeling the efficiency of top Arab banks: A DEA–neural network approach

793

Modeling the elastic modulus of 2D woven CVI SiC composites

794

Modeling the elastic properties and damage evolution in Ti–Al3Ti metal–intermetallic laminate (MIL) composites

795

Modeling the elastic properties and damage evolution in Ti–Al3Ti metal–intermetallic laminate (MIL) composites

796

Modeling the elastic properties of carbon nanotube array/polymer composites

797

Modeling the elastic properties of concrete composites: Experiment, differential effective medium theory, and numerical simulation

798

Modeling the elastomeric properties of stereoregular polypropylenes in nanocomposites with spherical fillers

799

Modeling the e-learning development based on instructional leadership: a mixed study

800

Modeling the electric structures of two thunderstorms and their contributions to the global circuit

801

Modeling the electrical conductivity of Al–Cu–Ru icosahedral quasicrystals

802

Modeling the electrical conductivity of Al–Cu–Ru icosahedral quasicrystals

803

Modeling the Electrical Impedance of Epoxy Polymer/Carbon Black Composite Materials

804

Modeling the electrical percolation of mixed carbon fillers in polymer blends

805

Modeling the electrical resistivity of Zn–Mn–S nanocrystalline semiconductors

806

Modeling the electrified solid–liquid interface

807

Modeling the electroless nickel deposition on aluminum nanoparticles

808

Modeling the electromagnetic response of hearing aids to digital wireless phones

809

Modeling the Electromyogram Signal of Stimulated Biceps Brachii Muscle

810

Modeling the electron field emission from carbon nanotube films

811

Modeling the electron field emission from carbon nanotube films

812

Modeling the electron field emission from carbon nanotube films

813

Modeling the emergence of bilingual acoustic clusters: a preliminary case study

814

Modeling the emission line sequence of H II galaxies

815

Modeling the emission of hydrogen chloride and free chlorine from the thermal treatment of polyvinyl chloride- (PVC-) based plastic materials

816

Modeling the emission of hydrogen chloride and free chlorine from the thermal treatment of polyvinyl chloride- (PVC-) based plastic materials

817

Modeling the emulsion polymerization of amino-functionalized latex particles

818

Modeling the endogeneity of lane-mean speeds and lane-speed deviations: a structural equations approach

819

Modeling the energy content of combustible ship-scrapping waste at Alang–Sosiya, India, using multiple regression analysis

820

Modeling the energy potential of biomass – H2RES

821

Modeling the energy response of pn-CCDs in the 0.2–10 keV band

822

Modeling the energy response of pn-CCDs in the 0.2–10 keV band

823

Modeling the enrollment demand of masters programs for the Spanish public university system

824

Modeling the environmental behavior and performance of livestock farmers in China: An ABM approach

825

Modeling the environmental collaboration process: A deductive approach

826

Modeling the environmental fate of manganese from methylcyclopentadienyl manganese tricarbonyl in urban landscapes

827

Modeling the environmental impacts of urban land use and land cover change—a study in Merseyside, UK

828

Modeling the environmental response of leaf net photosynthesis in Pinus pinea L. natural regeneration

829

Modeling the environmental response of leaf net photosynthesis in Pinus pinea L. natural regeneration

830

Modeling the Erosion of Mixtures of Organic and Granular In-Sewer Sediments

831

Modeling the ETEX plume dispersion with the Canadian emergency response model

832

Modeling the ethical leadership and the organizational trust with the organizational learning in the work environment

833

Modeling the Euro overnight rate

834

Modeling the European natural gas market during the 2009 Russian–Ukrainian gas conflict: Ex-post simulation and analysis

835

Modeling the Evaluation Criteria for Security Patterns in Web Service Discovery

836

MODELING THE EVALUATION OF CUSTOMER BASED BRAND EQUITY OF TWO WHEELERS

837

Modeling the evaporation and dispersion of airborne sputum droplets expelled from a human cough

838

Modeling the evolution in microstructure and properties during plastic deformation of f.c.c.-metals and alloys – an approach towards a unified model

839

Modeling the evolution in microstructure and properties during plastic deformation of f.c.c.-metals and alloys – an approach towards a unified model

840

Modeling the evolution of anisotropy in Al–Li alloys: application to Al–Li 2090-T8E41

841

Modeling the Evolution of C4 Photosynthesis

842

Modeling the evolution of continental subduction processes in the Pamir–Hindu Kush region

843

Modeling the evolution of crystallographic dislocation density in crystal plasticity

844

Modeling the evolution of dislocation populations under non-proportional loading

845

Modeling the evolution of droplet size distribution in two-phase flows

846

Modeling the Evolution of Genetic Architecture: A Continuum of Alleles Model with Pairwise A×A Epistasis

847

Modeling the evolution of loess-covered landforms in the Loess Plateau of China using a DEM of underground bedrock surface

848

Modeling the evolution of molecular systems from a mechanistic perspective

849

Modeling the evolution of molecular systems from a mechanistic perspective

850

Modeling the Evolution of Protein Domain Architectures Using Maximum Parsimony

851

Modeling the evolution of snow, snow ice and ice in the Baltic Sea

852

Modeling the evolution of stress due to differential shrinkage in powder-processed functionally graded metal–ceramic composites during pressureless sintering

853

Modeling the evolution of texture and grain shape in Mg alloy AZ31 using the crystal plasticity finite element method

854

Modeling the evolution of volatile species during tobacco pyrolysis

855

Modeling the extraction of carotene and lipids from pressed palm oil (Elaes guineensis) fibers using supercritical CO2

856

Modeling the extrafocal radiation and monitor chamber backscatter for photon beam dose calculation

857

Modeling the F+H2S reaction with an F+HS potential

858

Modeling the F2 topside and plasmasphere for IRI using IMAGE/RPI and ISIS data Original Research Article

859

Modeling the factors affecting financial literacy using structural equations

860

Modeling the Factors Affecting Individuals’ Use of Community Networks: A Theoretical Explanation of Community-Based Information and Communication Technology Use

861

Modeling the Factors Affecting the Use of Environmental Management Accounting Tools

862

Modeling the Factors Affecting Unsafe Behavior in the Construction Industry from Safety Supervisorsʹ Perspective

863

Modeling the Factors Affecting Unsafe Behaviors using Fuzzy Logic in an Iranian Steel Industry

864

Modeling the failure data of a repairable equipment with bathtub type failure intensity

865

Modeling the failure data of a repairable equipment with bathtub type failure intensity

866

Modeling the failure of a fractal tree and Julia sets

867

Modeling the failure of intermetallic/solder interfaces

868

Modeling the failure of magmatic foams with application to Stromboli volcano, Italy

869

Modeling the fate and effect of benzalkonium chlorides in a continuous-flow biological nitrogen removal system treating poultry processing wastewater

870

Modeling the fate of atmospheric reduced nitrogen during the Rocky Mountain Atmospheric Nitrogen and Sulfur Study (RoMANS): Performance evaluation and diagnosis using integrated processes rate analysis

871

Modeling the fate of down-the-drain chemicals in rivers: An improved software for GREAT-ER

872

Modeling the fate of drilling waste in marine environment — an overview

873

Modeling the fate of fertilizer N in paddy rice systems receiving manure and urea

874

Modeling the fate of particulate components in aerobic sludge stabilization – Performance limitations

875

Modeling the fatigue behaviors of glasphalt mixtures

876

Modeling the fatigue crack growth behavior of Ti-6Al-4V by considering grain size and stress ratio

877

Modeling the fatigue crack growth of X100 pipeline steel in gaseous hydrogen

878

Modeling the Feeding Process in Gill-Box Using Non-Linear Mass-Spring System

879

Modeling the film casting process using a continuum model for crystallization in polymers

880

Modeling the filtration process with a flat-type fabric filter

881

Modeling the fine particle impact damper

882

Modeling the fine particle impact damper

883

Modeling the finger joint moments in a hand at the maximal isometric grip: The effects of friction

884

Modeling the first instant of the interaction between a liquid and a plasma jet with a compressible approach

885

Modeling the fitness of plant morphologies across three levels of complexity

886

Modeling the flavor thresholds of organic acids in beer as a function of their molecular properties

887

Modeling the flow in a 90° rectangular duct using one Reynolds-stress and two eddy-viscosity models

888

Modeling the flow past an oscillating airfoil by the method of viscous vortex domains

889

Modeling the flow stress for single peak dynamic recrystallization

890

Modeling the Fluid-Flow-Induced Stress and Collapse in a Dendritic Network

891

Modeling the Fluid-Flow-Induced Stress and Collapse in a Dendritic Network

892

Modeling the fluxes of nitrogen, phosphate and sediments in Linthipe catchment, Southern Lake Malawi Basin: Implications for catchment management

893

Modeling the forced-air cooling process of fresh strawberry packages, Part I: Numerical model

894

Modeling the forced-air cooling process of fresh strawberry packages, Part II: Experimental validation of the flow model

895

Modeling the forced-air cooling process of fresh strawberry packages, Part III: Experimental validation of the energy model

896

Modeling the formation and dynamics of polycrystals in 3D

897

Modeling the formation of a sand bar within a large funnel-shaped, tide-dominated estuary: Qiantangjiang Estuary, China

898

Modeling the formation of bright slope deposits associated with gullies in Hale Crater, Mars: Implications for recent liquid water

899

Modeling the formation of chlorination by-products in river waters with different quality

900

Modeling the formation of PCDD/F in solid waste incinerators

901

Modeling the formation of precursors of dioxins during combustion of woody fuel volatiles

902

Modeling the formation of the K–Pg boundary layer

903

Modeling the formation of twins and stacking faults in the ag-cu system Original Research Article

904

Modeling the formation of undulations of the coastline: The role of tides

905

Modeling the fracture toughness and tensile ductility of SiCp/Al metal matrix composites

906

Modeling the fragmentation of non-uniform porous char particles during pulverized coal combustion

907

Modeling the free convection heat transfer in a partitioned cavity using ANFIS

908

Modeling the frequency and duration of microbial contamination events

909

Modeling the friction of ice

910

Modeling the fringing electric field effect on the threshold voltage of FD SOI nMOS devices with the LDD/sidewall oxide spacer structure

911

Modeling the full monty: baring the nature of surfaces across time and space

912

Modeling the gas and particle flow inside cyclone separators

913

Modeling the gas flow in the neutralizer of ITER neutral beam injector using Direct Simulation Monte Carlo approach

914

Modeling the gas flow upstream and in the sampling nozzle of the inductively coupled plasma mass spectrometer via the Direct Simulation Monte Carlo algorithm

915

Modeling the gas flow upstream and in the sampling nozzle of the inductively coupled plasma mass spectrometer via the Direct Simulation Monte Carlo algorithm

916

Modeling the gas flux from a Jupiter-family comet nucleus

917

Modeling the genotoxicity of viral vector integration in a tumor prone hematopoietic stem cell transplantation model

918

Modeling the Geographic Consequence and Pattern of Dengue Fever Transmission in Thailand

919

Modeling the geographic distribution of serious mental illness in New Zealand

920

Modeling the geographical studies with GeoGebra-software

921

Modeling the geomagnetic perturbations produced by ionospheric currents, above and below the ionosphere

922

Modeling the glass transition of amorphous networks for shape-memory behavior

923

Modeling the global cycle of marine dissolved organic matter and its influence on marine productivity

924

Modeling the global cycle of marine dissolved organic matter and its influence on marine productivity

925

Modeling the glucose–insulin regulatory system and ultradian insulin secretory oscillations with two explicit time delays

926

Modeling the goals of the west from the nuclear dispute with Iran using system dynamics

927

Modeling the grain growth kinetics by cellular automaton

928

Modeling the Greek energy system: Scenarios of clean energy use and their implications

929

Modeling the growth and interaction of multiple dendrites in solidification using a level set method

930

Modeling the growth kinetics of Bacillus cereus as a function of temperature, pH, sodium lactate and sodium chloride concentrations

931

Modeling the growth limit of the Changjiang Delta

932

Modeling the growth of Byssochlamys fulva and Neosartorya fischeri on solidified apple juice by measuring colony diameter and ergosterol content

933

Modeling the growth of Indian and Chinese liquid crystals literature as reflected in Science Citation Index (1997–2006)

934

Modeling the growth of Listeria monocytogenes based on a time to detect model in culture media and frankfurters

935

Modeling the growth of Listeria monocytogenes on cut cantaloupe, honeydew and watermelon

936

Modeling the growth of objects through a stochastic process of random sets

937

Modeling the growth of rabbits raised in humid climate for improved breeding

938

Modeling the growth of Staphylococcus aureus as affected by black zira (Bunium persicum) essential oil, temperature, pH and inoculum levels

939

Modeling the growth of world social science literature

940

Modeling the growth rate and lag time of different strains of Salmonella enterica and Listeria monocytogenes in ready-to-eat lettuce Original Research Article

941

Modeling the growth rates of Escherichia coli spp. and Salmonella Typhimurium LT2 in baby spinach leaves under slow cooling

942

Modeling the Growth/No-Growth Interface of Zygosaccharomyces bailii in Mango Puree

943

Modeling the habitat associations and spatial distribution of benthic macroinvertebrates: A hierarchical Bayesian model for zero-inflated biomass data

944

Modeling the habitat associations and spatial distribution of benthic macroinvertebrates: A hierarchical Bayesian model for zero-inflated biomass data

945

Modeling the habitat suitability for sympatric small and medium-sized felids and investigating the spatiotemporal niche overlapping in Maduru Oya National Park, Sri Lanka

946

Modeling the Habitat Suitability of Persian Leopard (Panthera Pardus Saxicolor) in the Conservation Areas of Kohkiloye-and-Boyer-Ahmad, Iran

947

Modeling the hardness and yield strength evolutions of aluminum alloy with rod/needle-shaped precipitates

948

Modeling the heat transfer characteristics of flow melting of phase change material slurries in the circular tubes

949

Modeling the heating of biological tissue based on the hyperbolic heat transfer equation

950

MODELING THE HEATING OF STEEL IN CONTINUOUS AND ANNULAR FURNACES

951

Modeling the heating uniformity contributed by a rotating turntable in microwave ovens Original Research Article

952

Modeling the heating value of Municipal Solid Waste☆

953

Modeling the height of young forests regenerating from recent disturbances in Mississippi using Landsat and ICESat data

954

Modeling the heliosphere: Influence of the interstellar magnetic field in the presence of LISM neutral hydrogen Original Research Article

955

Modeling the hepatic arterial buffer response in the liver

956

Modeling the heterogeneous ice and gas coma of Comet 103P/Hartley 2

957

Modeling the heterogeneous microstructures of Ti-base metal-matrix composites in the consolidation processes

958

Modeling the hiding–learning dynamics in large living systems

959

Modeling the hierarchical structure of attachment representations: A test of domain differentiation

960

Modeling the high pH sensitivity of Suspended Gate Field Effect Transistor (SGFET)

961

Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration

962

Modeling the high-pressure phase equilibria of carbon dioxide–triglyceride systems: A parameterization strategy

963

Modeling the high-temperature catalytic partial oxidation of methane over platinum gauze: Detailed gas-phase and surface chemistries coupled with 3D flow field simulations Original Research Article

964

Modeling the high-temperature creep behaviors of 7075 and 2124 aluminum alloys by continuum damage mechanics model

965

MODELING THE HOT DEFORMATION FLOW CURVES OF API X65 PIPELINE STEEL USING THE POWER LAW EQUATION

966

Modeling the Human Genome Maintenance network

967

Modeling the human skin barrier — Towards a better understanding of dermal absorption

968

Modeling the human skin barrier—Towards a better understanding of dermal absorption

969

Modeling the human-induced spread of an aquatic invasive: The case of the zebra mussel

970

Modeling the Hybrid Flow Shop Scheduling Problem Followed by an Assembly Stage Considering Aging Effects and Preventive Maintenance Activities

971

Modeling the hydration of concrete incorporating fly ash or slag

972

Modeling the hydraulical behavior of a fissured-karstic aquifer in exploitation conditions

973

Modeling the hydrodynamic interactions of deep anoxic lagoons with their source basins

974

Modeling the hydrodynamics in a coupled high-density downer-to-riser reactor

975

Modeling the Hydrodynamics of Downers by Cluster-Based Approach

976

Modeling the hydrogen solubility in methanol, ethanol, 1-propanol and 1-butanol

977

Modeling the hydrogeochemistry of aquitards using minimally disturbed samples in radial diffusion cells

978

Modeling the hydrologic effects of roadside ditch networks on receiving waters

979

Modeling the hydrologic response of groundwater dominated wetlands to transient boundary conditions: Implications for wetland restoration

980

Modeling the hygroexpansion of aligned wood fiber composites

981

Modeling the ignition of self-propagating combustion synthesis of transition metal aluminides

982

Modeling the impact deformation of rods of a pressed PTFE/Al composite mixture

983

Modeling the impact of a biocontrol agent, Puccinia lagenophorae, on interactions between a crop, Daucus carota, and a weed, Senecio vulgaris

984

Modeling the impact of a carbon tax: A trial analysis for Washington State

985

Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance

986

Modeling the impact of alternative drainage practices in the northern Corn-belt with DRAINMOD-NII

987

Modeling the impact of body-contact recreation on pathogen concentrations in a source drinking water reservoir

988

Modeling the impact of chlorine on the behavior of Listeria monocytogenes on ready-to-eat meats

989

Modeling the Impact of climate change on Peanut Production on the Basis of Increasing 2oc temperature in Future Environmental conditions of guilan Province, Iran

990

Modeling the impact of climate change on rice production in Asia. Robin B. Mathews, Martin J. Kropff, Dominique Bachelet and H.H. Van Laar (Eds.), Published by CAB International in association with the International Rice Research Institute, 1995. pp. 289.

991

Modeling the impact of climate change on soil organic carbon stock in upland soils in the 21st century in China

992

Modeling the impact of climate variability on diarrhea-associated diseases in Taiwan (1996–2007) Original Research Article

993

Modeling the impact of control measures on tuberculosis infection in senior care facilities

994

Modeling the impact of direct phototransformation on predicted environmental concentrations (PECs) of propranolol hydrochloride in UK and US rivers Original Research Article

995

Modeling the impact of feeding stations on vulture scavenging service efficiency

996

Modeling the impact of feeding stations on vulture scavenging service efficiency

997

Modeling the impact of global change on regional agricultural land use through an activity-based non-linear programming approach

998

Modeling the impact of HIV on the spread of tuberculosis in the United States

999

Modeling the impact of HIV/AIDS upon food security of diverse rural households in Western Kenya

1000

Modeling the impact of HRM practices on knowledge workers’ job satisfaction and intention to stay: re-examining the Herzbergʹʹs two-factor theory of motivation

بازگشت