<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Plasma-chemical preparation of nanostructured catalysts for low-temperature steam conversion of carbon monoxide: catalytic activity
2
Plasma-chemical preparation of nanostructured catalysts for low-temperature steam conversion of carbon monoxide: properties of catalysts
3
Plasma-chemical preparation of nanostructured catalysts for low-temperature steam conversion of carbon monoxide: thermodynamic and model studies
4
Plasma-chemical reduction of iron oxide photoanodes for efficient solar hydrogen production
5
Plasmachemical synthesis and regeneration (activation) of nanostructured catalysts for steam conversion of methane
6
Plasma-chemically brominated single-walled carbon nanotubes as novel catalysts for oil hydrocarbons aerobic oxidation Original Research Article
7
Plasma-controlled chemistry in plasma reforming of methane
8
Plasmacytoid DCs and cancer: a new role for an enigmatic cell
9
Plasmacytoid dendritic cells in angiolymphoid hyperplasia with eosinophilia
10
Plasmacytoid dendritic cells move down on the list of suspects: In search of the immune pathogenesis of chronic hepatitis C
11
Plasmacytoid dendritic cells of the gut: Relevance to immunity and pathology
12
Plasmacytoid dendritic cells produce cytokines and mature in response to the TLR7 agonists, imiquimod and resiquimod
13
Plasmacytoid dendritic cells represent a major dendritic cell subset in sentinel lymph nodes of melanoma patients and accumulate in metastatic nodes
14
Plasmacytoid Myoepithelioma of the Palate with Rapid Growth: A Case Report
15
Plasmacytoid variant urothelial bladder cancer: Is it time to update the treatment paradigm?
16
Plasmacytoma Of Larynx—A Case Report
17
Plasmacytoma of the Kidney
18
Plasmacytoma of the proximal humerus
19
Plasma-deposited amorphous silicon carbide films for micromachined fluidic channels
20
Plasma-deposited copper phthalocyanine: A single gas-sensing material with multiple responses
21
Plasma-deposited hydrogenated carbon–germanium semiconducting films doped with acceptor and donor centers
22
Plasma-deposited parylene-like thin films: process and material properties
23
Plasma-deposited silicon oxide barrier films on polyethersulfone substrates: temperature and thickness effects
24
Plasma-driven superpermeation of hydrogen through Nb membranes: bulk effects
25
Plasma-driven tunable liquid adhesion of superoleophobic aluminum surfaces
26
Plasma-electrolytic formation, composition and catalytic activity of manganese oxide containing structures on titanium
27
Plasma-enabled, catalyst-free growth of carbon nanotubes on mechanically-written Si features with arbitrary shape
28
Plasma-enhanced atomic layer deposition (PEALD) of cobalt thin films for copper direct electroplating
29
Plasma-enhanced atomic layer deposition of Ir thin films for copper adhesion layer
30
Plasma-enhanced atomic layer deposition of titania on alumina for its potential use as a hydrogen-selective membrane
31
Plasma-enhanced chemical vapor deposition of nitrides on fluidized particles
32
Plasma-enhanced chemical vapor deposition of polyperinaphthalene thin films
33
Plasma-enhanced chemical vapor deposition of zinc oxide at atmospheric pressure and low temperature
34
Plasma-enhanced chemical vapour-deposited silicon nitride films; The effect of annealing on optical properties and etch rates
35
Plasma-enhanced CVD of (Ti,Al)N films from chloridic precursors in a DC glow discharge
36
Plasma-enhanced deposition of hard silicon nitride-like coatings from hexamethyldisiloxane and ammonia
37
Plasma-enhanced HC-SCR of NOx in the presence of excess oxygen
38
Plasma-enhanced modification of the pore size of ceramic membranes Original Research Article
39
Plasma-enhanced reactively evaporated deposition of SiO2 films
40
Plasma-field interactions in the wake region of a space vehicle
41
Plasma-Free Fatty Acids, Fatty Acid–Binding Protein 4, and Mortality in Older Adults (from the Cardiovascular Health Study)
42
Plasma-functionalized electrospun matrix for biograft development and cardiac function stabilization
43
Plasma-grafted PVDF polymers as anion exchange membranes for the electrotransport of Cr(VI) Original Research Article
44
Plasma-induced graft co-polymerization of acrylic acid onto the polyurethane surface
45
Plasma-induced graft polymerization of acrylic acid onto poly(ethylene terephthalate) films: characterization and human smooth muscle cell growth on grafted films
46
Plasma-induced graft polymerization of poly(ethylene glycol) methyl ether methacrylate on poly(tetrafluoroethylene) films for reduction in protein adsorption
47
Plasma-induced grafted polymerization of acrylic acid and subsequent grafting of collagen onto polymer film as biomaterials
48
Plasma-induced graft-polymerization of flame retardant monomers onto PAN fabrics
49
Plasma-induced immobilization of poly(ethylene glycol) onto poly(vinylidene fluoride) microporous membrane
50
Plasma-induced nanopillars on bare metal coronary stent surface for enhanced endothelialization
51
Plasma-induced photoresponse in few-layer graphene
52
Plasma-induced polymerisation of hydrophilic coatings onto macroporous hydrophobic scaffolds
53
Plasma-induced polymerization as a tool for surface functionalization of polymer scaffolds for bone tissue engineering: An in vitro study
54
Plasma-induced polymerization for enhancing paper hydrophobicity
55
Plasma-induced surface segregation and oxidation in nickel–iron thin films
56
Plasma-induced TCO texture of ZnO:Ga back contacts on silicon thin film solar cells
57
Plasma-ion beam source enhanced deposition system
58
Plasma-ion diagnostics using a newly designed differential-spectrum ion-energy analyzer with electrostatic slanted grids
59
Plasma-Jet Forming of Sheet Metal Shapes
60
PLASMAKIN: A chemical kinetics library for plasma physics modeling Original Research Article
61
Plasma–lithium interaction in the CDX-U spherical torus
62
Plasmalogen degradation by oxidative stress: production and disappearance of specific fatty aldehydes and fatty α-hydroxyaldehydes
63
Plasmalogen levels in Gaucher disease
64
Plasmalogen levels in serum from patients with impaired carbohydrate or lipid metabolism and in elderly subjects with normal metabolic values
65
Plasmalogen phospholipids — facts and theses to their antioxidative qualities
66
Plasmalogen phospholipids in plasma lipoproteins of normolipidemic donors and patients with hypercholesterolemia treated by LDL apheresis Original Research Article
67
Plasmalogens in pork: aldehyde composition and changes in aldehyde profile during refrigerated storage of raw and cooked meat
68
Plasmalogens, fatty acids and alkyl glyceryl ethers of marine and freshwater clams and mussels
69
Plasma-mediated ablation of biofilm contamination
70
Plasma-modification of sulfides for optimizing froth-flotation properties
71
Plasma-modified polypropylene membranes as separators in high-power alkaline batteries
72
Plasma-nitrided austenitic stainless steel 316L as bipolar plate for PEMFC
73
Plasmapheresis as effective treatment for thyrotoxic storm after sleeve pneumonectomy
74
Plasmapheresis for Thrombotic Thrombocytopenic Purpura following Bone Marrow Transplantation
75
Plasmapheresis in a child affected by acute disseminated encephalomyelitis
76
Plasmapheresis in fulminant acute disseminated encephalomyelitis
77
Plasmapheresis in the treatment of fatty liver of pregnancy: A case report
78
Plasmapheresis- Review Article
79
Plasmapheresis with Convalescent Plasma as a Rescue Therapy for COVID-19 Patients: A Case Series Jamshid Vafaeemanesh 1, *
80
Plasmapheresis with corticosteroids and antiviral: a lifesaving treatment for severe cases of Covid 19
81
Plasmapheresis: A New Strategy in the Treatment of COVID-19
82
Plasmapheresis: Lifesaving treatment in severe cases of HELLP syndrome
83
Plasmapheresis-Induced Hypercalcaemia
84
Plasma-plasmonics synergy in the Ga-catalyzed growth of Si-nanowires
85
Plasma-polymer coatings onto different biodegradable polyesters surfaces
86
Plasma-polymerised coatings used as pre-treatment for aluminium alloys
87
Plasma-polymerized acetylene nanofilms modified by nitrogen ion implantation
88
Plasma-polymerized C60 as a functionalized coating layer on fluorine-doped tin oxides for anode materials of lithium-ion batteries
89
Plasma-polymerized phosphonic acid-based membranes for fuel cell
90
Plasmapolymerized silicon organic thin films from HMDSN for capacitive humidity sensors
91
Plasma-polymerized thin films as new membranes for miniature solid alkaline fuel cells Original Research Article
92
Plasma-polymerized thiophene films for enhanced rubber–steel bonding
93
Plasma-polymerized toluene films for corrosion inhibition in microelectronic devices
94
Plasma-promoted dielectric heating in the microwave synthesis of spinels
95
Plasma-reduced Ni/γ–Al2O3 and CeO2–Ni/γ–Al2O3 catalysts for improving dry reforming of propane
96
Plasma-refining process to provide solar-grade silicon
97
Plasma-related matrix effects in inductively coupled plasma—atomic emission spectrometry by group I and group II matrix-elements
98
Plasma-renin response to isotonic volume contraction in young salt-sensitive normotensive men
99
Plasma-Rich in Growth Factors Ameliorates Detrimental Effects of Cryopreservation on Human Sperm: A Prospective Study
100
Plasmas for lab-on-the-chip applications
101
Plasmas for medicine
102
Plasmas for medicine
103
Plasma-scan sintering of aluminosilicate sol–gel films
104
Plasma-source mass spectrometry for speciation analysis: state-of-the-art
105
Plasmasphere electron temperature model based on Akebono data Original Research Article
106
Plasmasphere electron temperature structures Original Research Article
107
Plasmaspheric electron content derived from GPS TEC and digisonde ionograms Original Research Article
108
Plasmaspheric electron content derived from GPS TEC and FORMOSAT-3/COSMIC measurements: Solar minimum condition Original Research Article
109
Plasmaspheric extension of topside electron density profiles Original Research Article
110
Plasma-spray coated rare-earth oxides on molybdenum disilicide – High temperature stable emitters for thermophotovoltaics
111
Plasma-spray coated rare-earth oxides on molybdenum disilicide – High temperature stable emitters for thermophotovoltaics
112
Plasma-sprayed 3.9YSZ porous coatings with mille-feuille structure and high composite porosity for SOFC applications
113
Plasma-sprayed Al–21Ti–23Cr coating for oxidation protection of TiAl alloys
114
Plasma-sprayed calcium phosphate particles with high bioactivity and their use in bioactive scaffolds
115
Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro
116
Plasma-sprayed ceramic coatings: anisotropic elastic and conductive properties in relation to the microstructure; cross-property correlations
117
Plasma-sprayed ceramic coatings: anisotropic elastic and conductive properties in relation to the microstructure; cross-property correlations
118
Plasma-sprayed composite coatings with reduced friction coefficient
119
Plasma-sprayed diopside coatings for biomedical applications
120
Plasma-sprayed glass-ceramic coatings on ceramic tiles: microstructure, chemical resistance and mechanical properties
121
Plasma-sprayed graded ceramic coatings on refractory materials for improved chemical resistance
122
Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties
123
Plasma-sprayed hydroxyapatite coating on titanium alloy with ZrO2 second phase and ZrO2 intermediate layer
124
Plasma-sprayed hydroxyapatite coatings on carbon/carbon composites
125
Plasma-sprayed hydroxyapatite+titania composite bond coat for hydroxyapatite coating on titanium substrate
126
Plasma-sprayed wear-resistant coatings with respect to ecological aspects
127
Plasma-sprayed wollastonite 2M/ZrO2 composite coating
128
Plasma-sprayed yttria-stabilized zirconia coatings on type 316L stainless steel for pyrochemical reprocessing plant
129
Plasma–surface interaction effects during high ion temperature long pulse experiments in TRIAM-1M
130
Plasma–surface interactions on liquids
131
Plasma-surface modification of biomaterials
132
Plasma-thermal purification and annealing of carbon nanotubes Original Research Article
133
Plasmatic homocyst(E)ine and folate are related to arterial blood pressure in type 2 diabetes mellitus
134
Plasmatic Level of Leukocyte-Derived Microparticles Is Associated With Unstable Plaque in Asymptomatic Patients With High-Grade Carotid Stenosis
135
Plasmatic Levels of N-terminal Pro-BNP in Elderly Patients with Atrial Fibrillation and Heart Failure with Preserved Ejection Fraction
136
Plasmatic parameters of coagulation activation in thrombotic microangiopathy
137
Plasmatocyte sensitivity to plasmatocyte spreading peptide (PSP) fluctuates with the larval molting cycle
138
Plasmatocyte spreading peptide (PSP1) and growth blocking peptide (GBP) are multifunctional homologs
139
Plasmatocytes from the moth Pseudoplusia includens induce apoptosis of granular cells
140
Plasma-treated carbonyl iron particles as a dispersed phase in magnetorheological fluids
141
Plasma-treated nanostructured TiO2 surface supporting biomimetic growth of apatite
142
Plasma-treated PDMS-membranes in solvent resistant nanofiltration: Characterization and study of transport mechanism
143
Plasma-treated polyethylene film: A smart material applied for Salmonella Typhimurium detection
144
Plasma-treated polymer as humidity sensing material—a feasibility study
145
Plasma-treated polystyrene surfaces: model surfaces for studying cell–biomaterial interactions
146
Plasma-treatment of MgO film in a.c. plasma display
147
Plasma-Wall Interaction
148
Plasma-wall interaction and plasma behaviour in the non-boronised all tungsten ASDEX Upgrade
149
Plasma–wall interaction at the ASDEX Upgrade tungsten heat shield
150
Plasma–wall interaction issues in ITER
151
Plasma-wall interactions and plasma behaviour in fusion devices with liquid lithium plasma facing components
152
Plasma–wall interactions and radial electric fields in the reversed field pinch RFX
153
Plasma-Wave Enhanced THz-Performance of a Nanometer Side-Gated Transistor.
154
Plasmepsin II inhibition and antiplasmodial activity of Primaquine–Statine `double-drugsʹ
155
Plasmid as a measure of microbial degradation capacity for 2,4-dichlorophenoxyacetic acid
156
Plasmid associated antibiotic resistance in Vibrios isolated from coastal waters of Kerala
157
Plasmid containing CpG motifs enhances the efficacy of porcine reproductive and respiratory syndrome live attenuated vaccine
158
Plasmid containing CpG motifs enhances the efficacy of porcine reproductive and respiratory syndrome live attenuated vaccine
159
Plasmid containing CpG oligodeoxynucleotides can augment the immune responses of pigs immunized with porcine reproductive and respiratory syndrome killed virus vaccine
160
Plasmid containing CpG oligodeoxynucleotides can augment the immune responses of pigs immunized with porcine reproductive and respiratory syndrome killed virus vaccine
161
Plasmid content evaluation of activated sludge
162
Plasmid Curing in Multi-Drug Resistant Hospital and Community Uropathogenic Escherichia coli
163
Plasmid DNA encoding antigens of infectious bursal disease viruses induce protective immune responses in chickens: factors influencing efficacy
164
Plasmid DNA Induces Increased Lymphocyte Trafficking: A Specific Role for CpG Motifs
165
Plasmid DNA isolation using amino-silica coated magnetic nanoparticles (ASMNPs)
166
Plasmid DNA microgels for drug/gene co-delivery: A promising approach for cancer therapy
167
Plasmid DNA partitioning and separation using poly(ethylene glycol)/poly(acrylate)/salt aqueous two-phase systems
168
Plasmid DNA processing for gene therapy and vaccination: Studies on the membrane sterilisation filtration step
169
Plasmid DNA Production for Genetic Immunization in Fed-Batch Fermentation with Feed Back Controls Based on Dissolved Oxygen (DO) and pH
170
Plasmid DNA recovery from fermentation broths by a combined process of micro- and ultrafiltration: Modeling and application
171
Plasmid DNA transmission through charged ultrafiltration membranes
172
Plasmid DNA/RNA separation by ultrafiltration: Modeling and application study
173
Plasmid exchanges among members of the Bacillus cereus group in foodstuffs
174
Plasmid isolation
175
Plasmid Mediated Antibiotic Resistance in Isolated Bacteria From Burned Patients
176
Plasmid mediated multidrug resistance of clinical Escherichia coli isolates
177
Plasmid Profile Analysis of Aminoglycoside-Resistant Escherichia coli Isolated From Urinary Tract Infections
178
Plasmid Profile Analysis of Bacteria Isolated From Selected Honey Samples in Nigeria
179
Plasmid Profile Analysis of Phage Sensitive E.coli Strains from Human Sewage System
180
Plasmid Profile and Characterization of Escherichia coli Isolated from Diabetic Foot Ulcers in Imo State, South Eastern Nigeria
181
Plasmid Profile and Enterobacterial Repetitive Intergenic Consensus-PCR Characterization of Salmonella Infantis Isolates Recovered From Poultry Sources
182
Plasmid Profile of Locally Isolated Streptococcus mutans in Relation with Mutacin Production
183
Plasmid profile of two isolates of Sinorhizobium meliloti isolated from different soil areas in Basrah/ Iraq
184
Plasmid Profile, Antibiotic Resistance, and Phenotypic Virulent Strains of S. flexneri
185
Plasmid profiles and antibiotic susceptibility patterns of bacteria isolated from abattoirs wastewater within Ilorin, Kwara, Nigeria
186
Plasmid profiling of Flavobacterium psychrophilum isolates from ayu (Plecoglossus altivelis altivelis) and other fish species in Japan
187
Plasmid purification using non-porous anion-exchange silica fibres
188
Plasmid relaxation induced by copper metalated diglycine conjugates under heterogeneous reaction conditions
189
Plasmid systems to study RNA function in Escherichia coli
190
Plasmid transcriptional repressor CopG oligomerises to render helical superstructures unbound and in complexes with oligonucleotides
191
Plasmid transfer between introduced and indigenous bacteria in leaf litter, soil and vermicompost as affected by soil invertebrates
192
PLASMID-ASSOCIATED LACTOCIN RN78 PRODUCTION IN A LACTOBACILLUS RN78 STRAIN ISOLATED FROM A DAIRY SAMPLE IN IRAN
193
Plasmid-based E6-specific siRNA and co-expression of wild-type p53 suppresses the growth of cervical cancer in vitro and in vivo
194
Plasmid-based generation of recombinant coxsackievirus B3 particles carrying capsid gene replacement replicons
195
Plasmid-bearing, plasmid-free organisms competing for two complementary nutrients in a chemostat
196
Plasmid-encoded Antirestriction Protein ArdA Can Discriminate between Type I Methyltransferase and Complete Restriction–Modification System
197
Plasmid-mediate transfer of FLO1 into industrial Saccharomyces cerevisiae PE-2 strain creates a strain useful for repeat-batch fermentations involving flocculation–sedimentation
198
Plasmid-Mediated Antibiotic-Resistant Pattern of Lactobacillus spp. Isolated From Dairy Products
199
Plasmid-Mediated Class 1 and 2 Integron Carriage in Drug-Resistant Nosocomial Isolates of Acinetobacter baumannii
200
Plasmid-mediated colistin and fosfomycin resistance among clinical isolates of ESBL- and carbapenemase-producing Klebsiella pneumoniae in Northern Iran
201
Plasmid-Mediated colistin resistance in Escherichia coli isolated from neonatal dairy calves without prior consumption of colistin: A threat to public health
202
Plasmid-Mediated High-Level Ceftriaxone Resistance in a Salmonella enterica Serotype typhimurium Isolate
203
Plasmid-Mediated Mechanism of Quinolone Resistance on E. coli Isolates from Different Clinical Samples
204
plasmid-mediated mechanism of quinolone resistance on e. coli isolates from different clinical samples
205
Plasmid-Mediated Mechanism of Quinolone Resistance on E. coli Isolates from Different Clinical Samples
206
Plasmid-Mediated methicillin-resistant staphylococcus aureus in patients attending a tertiary health institution in Nigeria
207
Plasmid-Mediated Quinolone Resistance Genes in Escherichia coli Urinary Isolates from Two Teaching Hospitals in Turkey: Coexistence of TEM, SHV, CTX-M and VEB-1 Type β-lactamases
208
Plasmid-mediated quinolone resistance in Escherichia coli isolates from commercial broiler chickens in Semnan, Iran
209
Plasmids containing cos ends inhibit the replication of phage φCTX in Pseudomonas aeruginosa
210
Plasmids expressing interleukin-10 short hairpin RNA mediate IL-10 knockdown and enhance tumor necrosis factor alpha and interferon gamma expressions in response to porcine reproductive and respiratory syndrome virus
211
Plasmids expressing interleukin-10 short hairpin RNA mediate IL-10 knockdown and enhance tumor necrosis factor alpha and interferon gamma expressions in response to porcine reproductive and respiratory syndrome virus
212
Plasmids expressing porcine interferon gamma up-regulate pro-inflammatory cytokine and co-stimulatory molecule expression which are suppressed by porcine reproductive and respiratory syndrome virus
213
Plasmids expressing porcine interferon gamma up-regulate pro-inflammatory cytokine and co-stimulatory molecule expression which are suppressed by porcine reproductive and respiratory syndrome virus
214
Plasmids influence growth of rhizobia in the rhizosphere of clover
215
Plasmids influence growth of rhizobia in the rhizosphere of clover
216
Plasmids shape the diverse accessory resistomes of Escherichia coli ST131
217
Plasmids. Current Research and Future Trends, Georg Lipps (Ed.). Caister Academic Press (2008), ISBN: 978-1-904455-35-6
218
Plasmids. Current Research and Future Trends, Georg Lipps (Ed.). Caister Academic Press (2008), ISBN: 978-1-904455-35-6
219
Plasmin cleavage sites not detectable in fibrin within foamy macrophages of most human plaques
220
Plasmin induces the formation of multicellular spheroids of breast cancer cells
221
Plasmin(ogen)-binding α-Enolase from Streptococcus pneumoniae: Crystal Structure and Evaluation of Plasmin(ogen)-binding Sites
222
Plasmin-clipped β2-glycoprotein-I inhibits endothelial cell growth by down-regulating cyclin A, B and D1 and up-regulating p21 and p27
223
Plasminogen activation by fibroblasts from periodontal ligament and gingiva is not directly affected by chemokines in vitro
224
Plasminogen Activation in Degradation and Penetration of Extracellular Matrices and Basement Membranes by Invasive Bacteria
225
Plasminogen Activator and Serine Protease Inhibitor-E2 (Protease Nexin-1) Expression by Bovine Granulosa Cells In Vitro
226
Plasminogen Activator Inhibitor 1 Expression is Regulated by the Inflammatory Mediators Interleukin-1α, Tumor Necrosis Factor-α, Transforming Growth Factor-β and Oncostatin M in Human Cardiac Myocytes
227
Plasminogen Activator Inhibitor 2: Expression and Role in Differentiation of Epidermal Keratinocyte*1
228
Plasminogen activator inhibitor type 1 gene polymorphisms and haplotypes are associated with plasma plasminogen activator inhibitor type 1 levels but not with myocardial infarction or stroke
229
Plasminogen activator inhibitor type 1 in adults with Down syndrome and protection against macrovascular disease
230
Plasminogen activator inhibitor type 1: Influence of metabolic factors and pharmacological control
231
Plasminogen activator inhibitor-1 (PAI-1) activity post myocardial infarction: the role of acute phase reactants, insulin-like molecules and promoter (4G/5G) polymorphism in the PAI-1 gene
232
Plasminogen activator inhibitor-1 4G/5G gene polymorphism in hemodialysis patients with cardiovascular disease
233
Plasminogen Activator Inhibitor-1 4G/5G Polymorphism Contributes to Osteonecrosis of the Femoral Head Susceptibility: Evidence from a Systematic Review and Meta-analysis
234
Plasminogen Activator Inhibitor-1 and Angiotensin I Converting Enzyme Gene Polymorphism in Patients With Hypertension
235
Plasminogen Activator Inhibitor-1 and Insulin Resistance in Coronary Heart Disease Male Patients With and Without Type 2 Diabetes Mellitus
236
Plasminogen activator inhibitor-1 deficient mice are protected from angiotensin II-induced fibrosis
237
Plasminogen activator inhibitor-1 gene polymorphism and colorectal cancer risk and prognosis
238
Plasminogen activator inhibitor-1 is determinant of coronary thrombosis in sudden cardiac death
239
Plasminogen Activator Inhibitor-1 Is Expressed in Cultured Rat Sertoli Cells
240
PLASMINOGEN ACTIVATOR INHIBITOR-1 IS REGULATED BY GLYCOPROTEIN 130 LIGANDS IN HUMAN ADIPOSE TISSUE
241
Plasminogen Activator Inhibitor-1 Protects Endothelial Cells from FasL-Mediated Apoptosis
242
Plasminogen activator inhibitor-1, the acute phase response and vitamin C
243
Plasminogen Activator Inhibitor-2 is Highly Tolerant to P8 Residue Substitution—Implications for Serpin Mechanistic Model and Prediction of nsSNP Activities
244
Plasminogen activator system in oral squamous cell carcinoma
245
Plasminogen activator urokinase receptor as a diagnostic and prognostic biomarker in type 2 diabetic patients with cardiovascular disease
246
Plasminogen activators are involved in the degradation of bone by osteoclasts
247
Plasminogen binds to disease-associated prion protein of multiple species
248
Plasminogen deficiency results in poor clearance of non-fibrin matrix and persistent activation of hepatic stellate cells after an acute injury
249
Plasminogen levels and risk of coronary artery disease
250
Plasminogen Regulates Cardiac Repair After Myocardial Infarction Through its Noncanonical Function in Stem Cell Homing to the Infarcted Heart
251
Plasminogen-activator-inhibitor-1 4G/5G promoter polymorphism and prognosis of severely injured patients
252
Plasmocytoid dendritic cell deficit of early response to toll-like receptor 7 agonist stimulation in multiple sclerosis patients
253
Plasmocytome osseux solitaire. ہ propos de cinq cas
254
Plasmocytome osseux solitaire. ہ propos de cinq cas
255
Plasmocytome solitaire extramédullaire de la tête et du cou : à propos de cinq cas
256
Plasmocytome solitaire osseux
257
Plasmocytome solitaire osseux
258
Plasmocytome solitaire osseux : aspects thérapeutiques et évolutifs
259
Plasmocytomes extramédullaires : à propos de cinq cas
260
Plasmocytomes extramédullaires : à propos de cinq cas
261
Plasmocytomes extraosseux
262
Plasmocytomes extraosseux de la tête et du cou
263
Plasmocytomes extraosseux de la tête et du cou
264
Plasmodesmal-Associated Protein Kinase in Tobacco and Arabidopsis Recognizes a Subset of Non-Cell-Autonomous Proteins
265
Plasmodesmata as a Modulator of Osmotic Water Fluxes in Plants
266
Plasmodesmata signaling: many roles, sophisticated statutes
267
Plasmodesmata: dynamic regulation and role in macromolecular cell-to-cell signaling
268
Plasmodesmata: Structure, Function, Role in Cell Communication, A.J.E. Van Bel, W.J.P. Van Kesteren (Eds.). Springer-Verlag, Berlin, Heidelberg, New York (1999)
269
Plasmodesmata: the battleground against intruders
270
Plasmodesmata: the battleground against intruders
271
Plasmodiophora brassicae-induced Cell Death and Medium Alkalization in Clubroot-resistant Cultured Roots of Brassica rapa
272
Plasmodium berghei and Plasmodium yoelii: Molecular Karyotypes of DrugResistant Lines
273
Plasmodium berghei ANKA Infection in ICR Mice as a Model of Cerebral Malaria
274
Plasmodium berghei NK65 induces cerebral leukocyte recruitment in vivo: An intravital microscopic study
275
Plasmodium Biology: Genomic Gleanings
276
Plasmodium blood parasite found in endangered Galapagos penguins (Spheniscus mendiculus)
277
Plasmodium Circumsporozoite Protein Promotes the Development of the Liver Stages of the Parasite
278
Plasmodium coatneyi: Differential Clinical and Immune Responses of Two Populations of Macaca fascicularis from Different Origins
279
Plasmodium falciparum Allelic Diversity: A Comparison of DNA Extraction from Isolates Collected on Rapid Diagnostic Tests (Rdts) and Filter Paper
280
Plasmodium falciparum and helminth coinfections among schoolchildren in relation to agro-ecosystems in Mvomero District, Tanzania
281
Plasmodium falciparum and Plasmodium vivax Prevalence in Ethiopia: A Systematic Review and Meta-Analysis
282
PLASMODIUM FALCIPARUM CLINICAL MALARIA IN DIELMO, A HOLOENDEMIC AREA IN SENEGAL: NO INFLUENCE OF ACQUIRED IMMUNITY ON INITIAL SYMPTOMATOLOGY AND SEVERITY OF MALARIA ATTACKS
283
Plasmodium falciparum cross resistance
284
Plasmodium falciparum crossresistance between trimethoprim and pyrimethamine
285
Plasmodium falciparum gametocyte periodicity
286
Plasmodium falciparum gametocyte sex ratios in symptomatic children treated with antimalarial drugs
287
Plasmodium falciparum GPI toxin: A common foe for man and mosquito
288
Plasmodium falciparum hypoxanthineguanine phosphoribosyltransferase as a chemotherapeutic target: Comparison of the human and parasite enzymes
289
Plasmodium falciparum hypoxanthine-guanine phosphoribosyltransferase as a chemotherapeutic target: Comparison of the human and parasite enzymes
290
Plasmodium falciparum Infection in HIV-Infected Patients on Highly Active Antiretroviral Therapy (HAART) In Benin City, Ni-geria
291
Plasmodium falciparum malaria acquired in Berlin, Germany
292
Plasmodium falciparum malaria in south-west Nigerian children: Is the polymorphism of ICAM-1 and E-selectin genes contributing to the clinical severity of malaria?
293
Plasmodium falciparum Malaria Infection Complicated by Haemophagocytic Syndrome in an Old Man
294
Plasmodium falciparum malaria transmitted in hospital through heparin locks
295
PLASMODIUM FALCIPARUM mdrl MUTATIONS AND IN VIVO CHLOROQUINE RESISTANCE IN INDONESIA
296
Plasmodium falciparum merozoite surface protein 1 (MSP1): genotyping and humoral responses to allele-specific variants
297
Plasmodium falciparum Merozoite Surface Protein-1 Polymorphisms among Asymptomatic Sickle Cell Anemia Patients in Nigeria
298
Plasmodium falciparum parasite infection prevalence from a household survey in Zambia using microscopy and a rapid diagnostic test: Implications for monitoring and evaluation
299
Plasmodium falciparum parasites in French Guiana: limited genetic diversity and high selfing rate
300
Plasmodium falciparum populations from northeastern Myanmar display high levels of genetic diversity at multiple antigenic loci
301
PLASMODIUM FALCIPARUM RESISTANCE TO SULFADOXINE/PYRIMETHAMINE IN UGANDA: CORRELATION WITH POLYMORPHISMS IN THE DIHYDROFOLATE REDUCTASE AND DIHYDROPTEROATE SYNTHETASE GENES
302
Plasmodium falciparum spliceosomal RNAs: 3′ and 5′ end processing
303
Plasmodium falciparum SSB Tetramer Binds Single-Stranded DNA Only in a Fully Wrapped Mode
304
Plasmodium falciparum SSB Tetramer Wraps Single-Stranded DNA with Similar Topology but Opposite Polarity to E. coli SSB
305
Plasmodium falciparum: Adhesion Phenotype of Infected Erythrocytes Using Classical and Mini-Column Cytoadherence Techniques.
306
Plasmodium falciparum: Infectivity of Cultured, Synchronized Gametocytes to Mosquitoes
307
Plasmodium falciparum: red blood cell binding studies of peptides derived from histidine-rich KAHRP-I, HRP-II and HRP-III proteins
308
Plasmodium knowlesi: The emerging zoonotic malaria parasite
309
Plasmodium vivax apicoplast genome: A comparative analysis of major genes from Indian field isolates
310
Plasmodium vivax dihydrofolate reductase point mutations from the Indian subcontinent
311
Plasmodium vivax in the Democratic Republic of East Timor: Parasite prevalence and antifolate resistance-associated mutations
312
Plasmodium Vivax Malaria: Usual Illness with Dysregulated Immune Profile
313
Plasmodium vivax MSP-3ß Gene as a Genetic Marker for the Parasite Detection in Comparison with Ssrrna Gene
314
Plasmodium yoelii in Mice: Antigen Reactivity of CD4- and CD8-Bearing T Cells
315
Plasmodium yoelii in mice: differential induction of cytokine gene expression during hyporesponsiveness induction and restimulation
316
Plasmodium yoelii: Cloning and Characterization of the Gene Encoding for the Mitochondrial Heat Shock Protein 60
317
Plasmodium: Immunization with Carboxyl-Terminal Regions of MSP-1 Protects against Homologous but Not Heterologous Blood-Stage Parasite Challenge^
318
Plasmodiumʹs escape route from host erythrocyte discovered
319
Plasmod-PPI: A web-server predicting complex biopolymer targets in plasmodium with entropy measures of protein–protein interactions
320
Plasmoid ejections driven by dynamo action underneath a spherical surface
321
Plasmologen Assembly: A Key Flavoenzyme
322
Plasmolysis as a Tool to Reveal Lead Localization in the Apoplast of Root Cells
323
Plasmolysis of sugarbeet: Pulsed electric fields and thermal treatment Original Research Article
324
Plasmon as a tool for in situ evaluation of physical properties for carbon materials Original Research Article
325
Plasmon assisted photoinduced surface changes in amorphous chalcogenide layer
326
Plasmon based antireflection coatings containing nanostructured Ag and silica medium
327
Plasmon contribution to the Raman spectra of a circular quantum wire
328
Plasmon coupling and coherent acoustic phonon dynamics of periodic gold pair nanocuboids by near-IR transient absorption spectroscopy
329
Plasmon dispersion and damping in double-layer electron systems
330
Plasmon dispersion in metallic lithium-ammonia solutions
331
Plasmon dispersion in metallic lithium–ammonia solutions
332
Plasmon dispersion in quasi-one- and one-dimensional systems with non-magnetic impurities
333
Plasmon dispersion in quasi-one-dimensional (TaSe4)2I and K0.3MoO3
334
Plasmon dispersion measurements in the electron microscope: Application to carbon solids
335
Plasmon emission by electrons in reflection high energy electron diffraction
336
Plasmon energy mapping in energy-filtering transmission electron microscopy
337
Plasmon energy mapping in energy-filtering transmission electron microscopy
338
Plasmon energy mapping in energy-filtering transmission electron microscopy
339
Plasmon Enhanced Electrooxidation of Ethanol using A New Au-Pt/TiO2/MWCNTs Photoelectrocatalyst
340
Plasmon enhanced photovoltaic effect in metallically nanomodified photocells
341
Plasmon excitation in polycyclic aromatic hydrocarbons studied by photoionization
342
Plasmon excitations and the effects of surface preparation in n-type InAs(001) studied by electron energy loss spectroscopy
343
Plasmon features in electron energy loss spectra from carbon materials Original Research Article
344
Plasmon holographic experiments: theoretical framework
345
Plasmon holographic experiments: theoretical framework
346
Plasmon hybridization in metallic nanotubes
347
Plasmon induced and pH controlled semiconductive conformation of 1H-2(phenylazo) imidazole on silver nanoparticles
348
Plasmon interference in nanotubes and nanowires
349
Plasmon mechanism of resistance magnetooscillations in a two-dimensional electron system in strong electric fields
350
Plasmon mediated visible light photocurrent and photoelectrochemical hydrogen generation using Au nanoparticles/TiO2 electrode
351
Plasmon microscopy and imaging ellipsometry of Artrobacter oxydans attached on polymer films
352
Plasmon modes in light emission from silver nanoparticles induced by a scanning tunneling microscope
353
Plasmon modes of double-layer graphene at finite temperature
354
Plasmon properties in classical lattice gauge theory
355
Plasmon resonance coupling in cold overdense dissipative plasma
356
Plasmon resonance modulated photoluminescence and Raman spectroscopy of diindenoperylene organic semiconductor thin film
357
Plasmon Resonance of the Hollow Triangular Nanostructures with Different Holes
358
Plasmon resonances in current between parallel wires of finite length
359
Plasmon resonances of Ag(001) and Ag(111) studied by power density absorption and photoyield
360
Plasmon Resonances of Nanoshells of Spheroidal Shape
361
Plasmon resonances of silver colloids studied by surface enhanced Raman spectroscopy
362
Plasmon tuning of nano-Au in dichroic devitrified antimony glass nanocomposites by refractive index control
363
Plasmon-assisted photoluminescence enhancement of SiC nanocrystals by proximal silver nanoparticles
364
Plasmon-enhanced luminescence of Sm complex using silver nanoparticles in Polyvinyl Alcohol
365
Plasmon-enhanced optical absorption and photocurrent in organic bulk heterojunction photovoltaic devices using self-assembled layer of silver nanoparticles
366
Plasmon-enhanced organic solar cells with solution-processed three-dimensional Ag nanosheets
367
Plasmon-enhanced photocurrent in dye-sensitized solar cells
368
Plasmonic Adder/Subtractor Module Based on a Ring Resonator Filter
369
Plasmonic Ag@AgCl-intercalated K4Nb6O17 composite for enhanced photocatalytic degradation of Rhodamine B under visible light
370
Plasmonic back contacts with non-ordered Ag nanostructures for light trapping in thin-film silicon solar cells
371
Plasmonic Circular Dichroism Study of Gold Nanorod-Quadruplex Nanobioconjugates
372
Plasmonic coupling in noble metal nanostructures
373
Plasmonic D-Shaped Photonic Crystal Fiber Biosensor with Gold Layer for Sensing of the Refractive Index
374
Plasmonic enhanced fluorescence spectroscopy using side-polished microstructured optical fiber
375
Plasmonic enhanced luminescence in Er3+:Ag co-doped tellurite glass
376
Plasmonic enhanced upconversion luminescence of β-NaYF4:Yb3+/Er3+ with Ag@SiO2 core–shell nanoparticles
377
Plasmonic enhancement of fluorescence for sensor applications
378
Plasmonic enhancement of photocatalytic decomposition of methyl orange under visible light
379
Plasmonic enhancement of photodynamic cancer therapy
380
Plasmonic enhancing nanoantennas for photodetection
381
Plasmonic Imaging in Thin Layer of PVP Contains silver nanowires
382
Plasmonic metal nanostructure array by glancing angle deposition for biosensing application
383
Plasmonic modes at the planar interface between Ag and chiral sculptured MgF2 thin film
384
Plasmonic nanohole arrays for monitoring growth of bacteria and antibiotic susceptibility test
385
Plasmonic Nanosilver Synthesis Using Sonneratia apetala Fruit Extract and Their Catalytic Activity in Organic Dye Degradation
386
Plasmonic photochemistry and photon confinement to the nanoscale
387
Plasmonic photo-thermal therapy (PPTT)
388
Plasmonic properties of silver in polymer
389
PLASMONIC RESONANT LIGHT SCATTERING BY A CYLINDER WITH RADIAL ANISOTROPY
390
Plasmonic silver nanoparticles for improved organic solar cells
391
Plasmonic Solar Cells, a New Way to Enhance Energy Conversion Efficiency: Analysis and Modeling of Effect of Metal Geometry
392
Plasmonic structure generation by laser illumination of silica colloid spheres deposited onto prepatterned polymer-bimetal films
393
Plasmonic superlattices: Hierarchical subwavelength hole arrays
394
Plasmonic Thermal Conductance of Stack of Metallic Nanorings
395
Plasmonics for photovoltaic applications
396
Plasmonics: Applications to nanoscale terahertz and optical devices
397
Plasmonics: Heat transfer between metal nanoparticles and supporting nanolayers
398
Plasmon-induced photochemical synthesis of silver triangular prisms and pentagonal bipyramids by illumination with light emitting diodes
399
Plasmon–molecular resonance coupling: Chlorine-p6 adsorbed on poly-l-lysine stabilized silver nanoparticles
400
Plasmon–phonon and plasmon–two different phonon interaction in Pb1−xMnxTe mixed crystals
401
Plasmon-resonance dew condensation sensor made of gold-ceramic nanocomposite and its application in condensation prevention
402
PLASMONS AND DIFFRACTION OF AN ELECTROMAGNETIC PLANE WAVE BY A METALLIC SPHERE
403
Plasmons and magnetoplasmons in semiconductor heterostructures
404
Plasmons and the drag effect in a strong magnetic field
405
Plasmons in graphene: Recent progress and applications
406
Plasmons in icosahedral quasicrystals: An EELS investigation
407
Plasmopara australis newly recorded from Brazil on the new host Luffa cylindrica
408
Plasmopara viticola germination virulence forecasting via piece-wise affine identification for hybrid systems
409
Plasmophore sensitized imaging of ammonia release from biological tissues using optodes Original Research Article
410
Plastazote protects rocket motors in transit
411
PLASTER ANALYSES ON EXTERIOR WALLS OF THE İMRAHOR İLYAS BEY MOSQUE (STUDIOS MONASTERY CHURCH)
412
PLASTER ANALYSES ON WALL PAINTINGS OF THE AINOS HAGIA SOPHIA CHURCH (FATIH MOSQUE)
413
Plaster Burn: Challenge to Plastic Surgeon
414
Plaster materials from waste calcium sulfate containing chemicals, organic fibers and inorganic additives
415
Plasters and renders for salt laden substrates
416
Plastibell Circumcision
417
Plastibell circumcision supported by a calcium-alginate fibre dressing to reduce bleeding
418
Plastibell Circumcision: How Safe is it? Experience at Sultan Qaboos University Hospital
419
PLASTIBELL CIRCUMCISION; EVALUATION OF A TECHNIQUE IN 800 CASES
420
Plastibell device circumcision versus bone cutter technique in terms of operative outcomes and parent’s satisfaction
421
Plastic ‘scrubbers’ in hand cleansers: a further (and minor) source for marine pollution identified
422
Plastic activity in nanoscratch molecular dynamics simulations of pure aluminium
423
Plastic analysis and twist capacity of high-strength concrete hollow beams under pure torsion
424
Plastic analysis of central crack specimen of cellular/foam materials
425
PLASTIC ANALYSIS OF PLANAR FRAMES USING CBO AND ECBO ALGORITHMS
426
PLASTIC ANALYSIS OF PLANAR FRAMES USING KINEMATIC METHOD AND GENETIC ALGORITHM
427
Plastic and elastic strains in short and long cracks in Alloy 600 studied by polychromatic X-ray microdiffraction and electron backscatter diffraction Original Research Article
428
Plastic and fatigue behaviour of ultrafine-grained magnesium
429
Plastic and reconstructive surgery of the breast : H. Bohmert, C. Gabka. 1996 Thieme 376 pages Price 348DM ISBN 3 13 1035714
430
Plastic and viscous shear displacements of a deep and very slow landslide in stiff clay formation
431
Plastic animals in cages: behavioural flexibility and responses to captivity
432
Plastic anisotropy and associated deformation mechanisms in nanotwinned metals Original Research Article
433
Plastic anisotropy and fracture behavior of cyclically deformed TiAl polysynthetically twinned crystals
434
Plastic anisotropy and fracture behavior of cyclically deformed TiAl polysynthetically twinned crystals
435
Plastic anisotropy and slip systems in ringwoodite deformed to high shear strain in the Rotational Drickamer Apparatus
436
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
437
Plastic anisotropy in aluminum and copper pre-strained by equal channel angular extrusion
438
Plastic anisotropy in b.c.c. transition metals
439
Plastic anisotropy in b.c.c. transition metals
440
Plastic anisotropy in fcc single crystals in high rate deformation
441
Plastic anisotropy of electro-deposited pure α-iron with sharp crystallographic <1 1 1>// texture in normal direction: Analysis by an explicitly dislocation-based crystal plasticity model
442
Plastic anisotropy of sheet metals determined by simple shear tests
443
Plastic anisotropy of sheet metals determined by simple shear tests
444
Plastic anisotropy of straight and cross rolled molybdenum sheets
445
Plastic anisotropy of textured ODS nickel-base alloy PM 1000
446
Plastic anisotropy of textured ODS nickel-base alloy PM 1000
447
Plastic anisotropy of ultrafine grained aluminium alloys produced by accumulative roll bonding
448
Plastic anisotropy of γ-TiAl revealed by axisymmetric indentation Original Research Article
449
Plastic antibodies as chemical sensor material for atrazine detection
450
Plastic bags as simple photobioreactors for cyanobacterial hydrogen production outdoors in Moscow region
451
Plastic behavior and constitutive modeling of armor steel over wide temperature and strain rate ranges
452
Plastic behavior of agglomerated powder
453
Plastic behavior of AZ80 alloy during low strain rate tension at elevated temperature
454
Plastic behavior of face-centered-cubic metals over a wide range of strain Original Research Article
455
Plastic behavior of fcc metals over a wide range of strain: Macroscopic and microscopic descriptions and their relationship Original Research Article
456
Plastic behavior of glassy polymers: Experimental and theoretical description based on three different approximations
457
Plastic behavior of magnetite and high strains obtained from magnetic fabrics in the Parry Sound shear zone, Ontario Grenville Province
458
PLASTIC BEHAVIOUR AND STABILITY CONSTRAINTS IN THE RELIABILITY BASED SHAKEDOWN ANALYSIS AND OPTIMAL DESIGN OF SKELETAL STRUCTURES
459
Plastic behaviour of 4H–SiC single crystals deformed at temperatures between 800 and 1300 °C
460
Plastic behaviour of different ceramic pastes processed by extrusion
461
Plastic behaviour of icosahedral Al–Cu–Fe quasicrystals: experiment and modelling
462
Plastic behaviour of icosahedral Al–Cu–Fe quasicrystals: experiment and modelling
463
Plastic behaviour of perforated sheets with slot-type holes under biaxial stress state
464
Plastic behaviour of perforated sheets with slot-type holes under biaxial stress state
465
Plastic behaviour of perforated sheets with slot-type holes under biaxial stress state
466
Plastic bending behaviour and section moment capacities of mono-symmetric LiteSteel beams with web openings
467
Plastic bending of a residually stressed beam
468
Plastic bending of adhesive-bonded sheet metals
469
Plastic bending of thin beryllium blades for neutron monochromators
470
Plastic bottles and moral codes
471
Plastic Bronchitis in a Child Presenting as Surgical Emphysema: a Case Report
472
Plastic Bronchitis in a Child Presenting as Surgical Emphysema: a Case Report
473
Plastic Bronchitis in a Five-Year-Old Boy Treated Using Extracorporeal Membrane Oxygenation; a Case Report
474
Plastic Bronchitis: Is Thoracic Duct Ligation a Real Surgical Option?
475
Plastic bronchitis; a serious complication of the Fontan operation
476
Plastic buckling analysis of thick plates using p-Ritz method
477
Plastic buckling and collapse of thin shell structures, using layered plastic modeling and co-rotational ANDES finite elements
478
Plastic buckling of circular cylindrical shells under combined in-plane loads
479
Plastic buckling of circular tubes under axial compression—part I: Experiments
480
Plastic buckling of circular tubes under axial compression—part I: Experiments
481
Plastic buckling of circular tubes under axial compression—part II: Analysis
482
Plastic buckling of circular tubes under axial compression—part II: Analysis
483
PLASTIC BUCKLING OF CYLINDRICAL SHELLS WITH CUTOUTS
484
Plastic buckling of thin hemispherical shell subjected to concentrated load at the apex
485
Plastic buckling of tubes under axial compression and internal pressure
486
Plastic buckling of tubes under axial compression and internal pressure
487
Plastic buckling strength of T-section transition ringbeams in steel silos and tanks
488
Plastic Bumetanide Membrane Sensor and its Applications in Pharmaceutical preparations and Biological Fluids
489
Plastic Bumetanide Membrane Sensor and its Applications in Pharmaceutical preparations and Biological Fluids
490
Plastic cavity growth during superplastic flow in AA 7475 Al alloy containing a small amount of liquid Original Research Article
491
Plastic changes in the human H-reflex pathway at rest following skillful cycling training
492
Plastic clay-like flow stress of saturated advanced ceramic powder compacts
493
Plastic collapse analysis of CFRP strengthened and rehabilitated degraded steel welded RHS beams subjected to combined bending and bearing
494
Plastic collapse analysis of defective pipelines under multi-loading systems
495
Plastic collapse analysis of defective pipelines under multi-loading systems
496
Plastic collapse analysis of defective pipelines under multi-loading systems
497
Plastic collapse analysis of thin-walled circular tubes subjected to bending
498
Plastic collapse analysis of thin-walled pipes based on unified yield criterion
499
Plastic collapse analysis of thin-walled pipes based on unified yield criterion
500
Plastic collapse and LBB behavior of statically indeterminate piping system subjected to a static load
501
Plastic collapse and LBB behavior of statically indeterminate piping system subjected to a static load Original Research Article
502
Plastic collapse assessment procedure for vessels with deep local thin area subjected to internal pressure Original Research Article
503
Plastic collapse in non-associated hardening materials with application to Cam-clay
504
Plastic collapse moment equations of throughwall axially cracked elbows subjected to combined internal pressure and in-plane bending moment
505
Plastic collapse moment equations of throughwall axially cracked elbows subjected to in-plane bending moment
506
Plastic collapse of a circular plate under cyclic loads
507
Plastic collapse of a stainless steel pressurized tube
508
Plastic collapse of cellular structures comprised of doubly tapered struts
509
Plastic collapse of cellular structures comprised of doubly tapered struts
510
Plastic collapse of cellular structures comprised of doubly tapered struts
511
Plastic collapse of thin-walled frusta and egg-box material under shear and normal loading
512
Plastic collapse of thin-walled frusta and egg-box material under shear and normal loading
513
Plastic collapse pressure of cylindrical vessels containing longitudinal surface cracks
514
Plastic constitutive behavior of short-fiber/particle reinforced composites
515
Plastic consumption and diet of Glaucous-winged Gulls (Larus glaucescens)
516
Plastic continuum with microstructure, local second gradient theories for geomaterials: localization studies
517
Plastic coupled instabilities of I-shaped steel beams
518
Plastic crystal behaviour in tetraethylammonium dicyanamide
519
Plastic crystalline phases of crown ether:salt complexes and their utilization in lithium-metal batteries
520
Plastic crystals: Dilatometric and thermobarometric complementary studies
521
Plastic crystal–solid biopolymer electrolytes for rechargeable lithium batteries
522
PLASTIC DAMAGE ANALYSIS FOR THE PROCESS ZONE OF A FATIGUE CRACK
523
Plastic damage mechanisms of polypropylene/polyamide 6/polyethelene-octene elastomer blends under cyclic tension
524
Plastic debris as nesting material in a Kittiwake-(Rissa tridactyla)-colony at the Jammerbugt, Northwest Denmark
525
Plastic debris collars on juvenile carcharhinid sharks (Rhizoprionodon lalandii) in southwest Atlantic
526
Plastic debris in Mediterranean seabirds
527
Plastic debris ingested by deep-water fish of the Ionian Sea (Eastern Mediterranean)
528
Plastic debris ingestion by sea turtle in Paraíba, Brazil
529
Plastic debris retention and exportation by a mangrove forest patch
530
Plastic deformability of metallic glass by artificial macroscopic notches Original Research Article
531
Plastic Deformation Analysis in Parallel Tubular Channel Angular Pressing (PTCAP)
532
Plastic deformation analysis of metals during equal channel angular pressing
533
Plastic deformation and contact area of an elastic–plastic contact of ellipsoid bodies after unloading
534
Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD
535
Plastic deformation and damage of polyoxymethylene in the large strain range at elevated temperatures
536
Plastic deformation and development of antigorite crystal preferred orientation in high-pressure serpentinites
537
Plastic deformation and development of clinopyroxene lattice preferred orientations in eclogites
538
Plastic deformation and dynamic recrystallization behaviors of Mg–5Gd–4Y–0.5Zn–0.5Zr alloy
539
Plastic deformation and fatigue properties of ternary CoTi based alloys containing Al at room and high temperatures
540
Plastic deformation and fracture behaviors of nitrogen-alloyed austenitic stainless steels
541
Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperatures
542
Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperatures
543
Plastic deformation and fracture of solids at the mesoscale level
544
Plastic deformation and fracture of solids at the mesoscale level
545
Plastic deformation and fracture of ultrafine-grained Al–Mg alloys with a bimodal grain size distribution Original Research Article
546
Plastic deformation and hardness in Mg–Zn–(Y,Ho) icosahedral quasicrystals
547
Plastic deformation and hardness in Mg–Zn–(Y,Ho) icosahedral quasicrystals
548
Plastic deformation and microstructural evolution during the shock consolidation of ultrafine copper powders
549
Plastic deformation and physical ageing in PMMA
550
Plastic deformation and residual stresses in amorphous silica pillars under uniaxial loading Original Research Article
551
Plastic deformation and strength of materials in small dimensions
552
Plastic deformation and strength of materials in small dimensions
553
Plastic deformation and surface tension of solids
554
Plastic deformation and yield criterion for compressible sintered powder materials
555
Plastic deformation behavior analysis of an electrodeposited copper thin film under fatigue loading
556
Plastic deformation behavior in dual-phase Ni–31Al intermetallics at elevated temperature
557
Plastic deformation behavior of amorphous Fe78Si9B13 alloy at elevated temperature
558
Plastic deformation behavior of AZ31 magnesium alloy under multiple passes cross compression
559
Plastic deformation behavior of Mg12YZn with 18R long-period stacking ordered structure
560
Plastic deformation behavior of Mg89Zn4Y7 extruded alloy composed of long-period stacking ordered phase
561
Plastic deformation behavior of NbSi2/MoSi2 crystals with oriented lamellae
562
Plastic deformation behavior of Ni3(Ti0.7Nb0.3) single crystals with D019 structure
563
Plastic deformation behavior of Ni3(Ti0.90Nb0.10) single crystals with the nine-layered ordered rhombohedral structure
564
Plastic deformation behavior of Ni3(Ti0.90Nb0.10) single crystals with the nine-layered ordered rhombohedral structure Original Research Article
565
Plastic deformation behavior of β-phase isotactic polypropylene in plane-strain compression at room temperature
566
Plastic deformation behaviors and their application in power spinning process of conical parts with transverse inner rib
567
Plastic deformation behaviors of Ni- and Zr-based bulk metallic glasses subjected to nanoindentation
568
Plastic deformation behaviour and operative slip systems in Ni3Nb single crystals Original Research Article
569
Plastic deformation behaviour in Ni3Ti single crystals with D024 structure Original Research Article
570
Plastic deformation behaviour of Fe–Cu composites predicted by 3D finite element simulations
571
Plastic deformation behaviour of fine-grained materials Original Research Article
572
Plastic deformation behaviour of thermoplastic/clay nanocomposites
573
Plastic deformation by shuffle dislocations in silicon
574
Plastic deformation by shuffle dislocations in silicon
575
Plastic deformation by shuffle dislocations in silicon
576
Plastic deformation by synchronized rotation of nanolayers under high stress in metals
577
Plastic deformation caused by pulsed magnetic treatment of mid-carbon steel
578
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation
579
Plastic deformation characteristics of cross-equal channel angular pressing
580
Plastic deformation due to reflected detonation
581
Plastic deformation energy of bulk metallic glasses
582
Plastic deformation experiments to high strain on mantle transition zone minerals wadsleyite and ringwoodite in the rotational Drickamer apparatus
583
Plastic deformation in 200 mm silicon wafers arising from mechanical loads in vertical-type and horizontal-type furnaces
584
Plastic deformation in 316LN stainless steel – characterization of deformation microstructures
585
Plastic deformation in Ce-based bulk metallic glasses during depth-sensing indentation
586
Plastic deformation in nanostructured bulk glass composites during nanoindentation
587
Plastic deformation in rough surface line contacts—a finite element study
588
Plastic deformation in structural materials, investigated in situ by neutrons and positrons
589
Plastic deformation in zirconium nitride observed by nanoindentation and TEM
590
Plastic deformation induced microstructure evolution through gradient enhanced crystal plasticity based on a non-convex Helmholtz energy
591
Plastic deformation inhomogeneity in a single crystal nickel-base superalloy
592
Plastic deformation inhomogeneity in a single crystal nickel-base superalloy
593
Plastic deformation localization in commercial Zr-base alloys
594
Plastic deformation mechanism of crystalline polymer materials in the equal channel angular extrusion process
595
Plastic deformation mechanism of pure aluminum at low homologous temperatures
596
Plastic deformation mechanism of pure copper at low homologous temperatures
597
Plastic deformation mechanism of pure copper at low homologous temperatures
598
Plastic deformation mechanism of ultra-fine-grained AA6063 processed by equal-channel angular pressing Original Research Article
599
Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy
600
Plastic deformation mechanisms in nanocrystalline columnar grain structures
601
Plastic deformation mechanisms of fcc single crystals at small scales Original Research Article
602
Plastic deformation modeling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals
603
Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading
604
Plastic deformation modes in perforated sheets and their relation to yield and limit surfaces
605
Plastic deformation modes in rigid polyurethane foam under static loading
606
Plastic deformation modes of regular hexagonal honeycombs under in-plane biaxial compression
607
Plastic deformation modes of regular hexagonal honeycombs under in-plane biaxial compression
608
Plastic deformation modes of regular hexagonal honeycombs under in-plane biaxial compression
609
Plastic deformation of 2024-T351 aluminum plate over a wide range of loading conditions
610
Plastic deformation of 25CrMo4 steel during wear: Effect of the temperature, the normal force, the sliding velocity and the structural state
611
Plastic deformation of 7075 Aluminium Alloy using Integrated Extrusion- Equal Channel Angular Pressing
612
Plastic deformation of a porous bcc metal containing nanometer sized voids
613
Plastic deformation of a rigid floating plate: An analytical study
614
Plastic deformation of a sinusoidal surface
615
Plastic deformation of a Ti-6% Al-4% V alloy with a strong transverse-type crystallographic α-texture at elevated temperatures
616
Plastic deformation of a Ti-6% Al-4% V alloy with a strong transverse-type crystallographic α-texture at elevated temperatures
617
Plastic deformation of Al and AA5754 between 4.2 K and 295 K
618
Plastic deformation of Al13Fe4 particles in Al–Al13Fe4 by high-speed compression
619
Plastic deformation of Al85Ni10La5 by equal channel angular pressing
620
Plastic deformation of Al–Cu–Fe quasicrystals embedded in Al2Cu at low temperatures
621
Plastic deformation of bcc metal thin foils without dislocation
622
Plastic deformation of bicrystals composed of polysynthetically twinned TiAl crystals Original Research Article
623
Plastic deformation of copper single crystals under cyclic loading
624
Plastic deformation of copper single crystals under cyclic loading
625
Plastic deformation of corrugated rails—a numerical approach using material data of rail steel
626
Plastic deformation of curved rail at rail weld caused by train–track dynamic interaction
627
Plastic deformation of decagonal Al–Ni–Co single quasicrystals
628
Plastic deformation of decagonal Al–Ni–Co single quasicrystals
629
Plastic deformation of dense nanocrystalline yttrium oxide at elevated temperatures
630
Plastic deformation of ductile ceramics in the Al2TiO5–MgTi2O5 system
631
Plastic deformation of Fe–Al polycrystals strengthened with Zr-containing Laves phases: I. Microstructure of undeformed materials
632
Plastic deformation of Fe–Al polycrystals strengthened with Zr-containing Laves phases: I. Microstructure of undeformed materials
633
Plastic deformation of Fe–Al polycrystals strengthened with Zr-containing Laves phases: I. Microstructure of undeformed materials
634
Plastic deformation of Fe-Al polycrystals strengthened with Zr-containing Laves phases: Part II. Mechanical properties
635
Plastic deformation of Fe-Al polycrystals strengthened with Zr-containing Laves phases: Part II. Mechanical properties
636
Plastic deformation of Fe-Al polycrystals strengthened with Zr-containing Laves phases: Part II. Mechanical properties
637
Plastic deformation of ferritic grains in presence of ODS particles and irradiation-induced defect clusters: A 3D dislocation dynamics simulation study
638
Plastic deformation of freestanding thin films: Experiments and modeling
639
Plastic deformation of garnets: systematics and implications for the rheology of the mantle transition zone
640
PLASTIC DEFORMATION OF HARDENING MATERIALS UNDER CYCLIC LOADINGS WITHIN THE FRAMEWORK OF THE SYNTHESIS PLASTICITY THEORY
641
PLASTIC DEFORMATION OF HARDENING MATERIALS UNDER CYCLIC LOADINGS WITHIN THE FRAMEWORK OF THE SYNTHESIS PLASTICITY THEORY
642
Plastic deformation of hardly deformable Al13Fe4 particles embedded in an Al–Al13Fe4 dual phase alloy
643
Plastic deformation of indium nanostructures
644
Plastic deformation of minerals under extreme pressure using a multi-anvil apparatus
645
Plastic deformation of minerals under extreme pressure using a multi-anvil apparatus
646
Plastic deformation of multicrystalline thin films: Grain size distribution vs. grain orientation
647
Plastic deformation of nanocrystalline aluminum at high temperatures and strain rate Original Research Article
648
Plastic deformation of nanocrystalline Cu and Cu–0.2 wt.% B
649
Plastic deformation of nanocrystalline Cu and Cu–0.2 wt.% B
650
Plastic deformation of nanocrystalline materials
651
Plastic deformation of nanocrystalline Pd–Au alloys: On the interplay of grain boundary solute segregation, fault energies and grain size Original Research Article
652
Plastic Deformation of Nano-Single Crystal Co-Cr-Ni- Fe-Mn High Entropy Alloy in Tension From 10 K to 1000 K by Atomistic Simulations
653
Plastic deformation of NiMnGa polycrystals
654
Plastic deformation of NiMnGa polycrystals
655
Plastic deformation of NiTi shape memory alloys Original Research Article
656
Plastic deformation of orthoenstatite and the ortho- to high-pressure clinoenstatite transition: a metadynamics simulation study
657
Plastic deformation of Pd41Ni10Cu29P20 bulk metallic glass
658
Plastic deformation of Pd41Ni10Cu29P20 bulk metallic glass
659
Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate
660
Plastic deformation of pure silicon nanocrystals by molecular dynamics
661
Plastic deformation of semiconductors: some recent advances and persistent challenges
662
Plastic deformation of semiconductors: some recent advances and persistent challenges
663
Plastic deformation of Si at low temperature under high confining pressure
664
Plastic deformation of Si at low temperature under high confining pressure
665
Plastic deformation of silicon nitride single crystals
666
Plastic deformation of silicon nitride single crystals
667
Plastic deformation of silicon nitride/boron nitride fibrous monoliths
668
Plastic deformation of single crystals of (Mo1−XWX)Si2 with the C11b structure
669
Plastic deformation of single crystals of (Mo1−XWX)Si2 with the C11b structure
670
Plastic deformation of single crystals of CrSi2 with the C40 structure
671
Plastic deformation of single crystals of CrSi2 with the C40 structure
672
Plastic deformation of single crystals of NbSi2 with the C40 structure
673
Plastic deformation of single crystals of NbSi2 with the C40 structure
674
Plastic deformation of single crystals of Ti5Si3 with the hexagonal D88 structure Original Research Article
675
Plastic deformation of single crystals of TiSi2 with the C54 structure Original Research Article
676
Plastic deformation of single crystals of transition metal disilicides
677
Plastic deformation of single crystals of transition metal disilicides
678
Plastic deformation of solderless press-fit connectors
679
Plastic deformation of spherulitic semi-crystalline polymers: An in situ AFM study of polybutene under tensile drawing
680
Plastic deformation of structural steels under hot-working conditions
681
Plastic deformation of submicron-sized crystals studied by in-situ Kikuchi diffraction and dislocation imaging
682
Plastic deformation of SUS304 under in situ and post-irradiation fatigue loadings
683
Plastic deformation of titanium alloys under simple loading and its mathematical modeling
684
Plastic deformation of ultrafine-grained 2.5Y-TZP exposed to a dc electric field with an air gap
685
Plastic deformation of uniaxially aligned lamellar γ/α2 titanium aluminides containing chromium
686
Plastic deformation of uniaxially aligned lamellar γ/α2 titanium aluminides containing chromium
687
Plastic deformation of wadsleyite and olivine at high-pressure and high-temperature using a rotational Drickamer apparatus (RDA)
688
Plastic deformation of wadsleyite: I. High-pressure deformation in compression
689
Plastic deformation of wadsleyite: II. High-pressure deformation in shear
690
Plastic deformation of wadsleyite: III. Interpretation of dislocations and slip systems
691
Plastic deformation of wadsleyite: IV Dislocation core modelling based on the Peierls–Nabarro–Galerkin model Original Research Article
692
Plastic deformation of zirconia single crystals: a review
693
Plastic deformation of zirconia single crystals: a review
694
Plastic deformation properties of the complex metallic alloy phase μ-Al–Mn
695
Plastic deformation properties of the orthorhombic complex metallic alloy phase Al13Co4
696
Plastic deformation studies of Zr-based bulk metallic glassy samples with a low aspect ratio
697
Plastic deformation under compression of Cu–Zn–Al martensitic single crystals
698
Plastic deformation under compression of Cu–Zn–Al martensitic single crystals
699
Plastic deformation under cyclic loading using two-back stress hardening models
700
Plastic deformation viewed as evolution of an active medium
701
Plastic deformation, damage and rupture of PM Ti–6Al–4V at 20 K under monotonic loading Original Research Article
702
Plastic deformation-induced phosphorus segregation to ferrite grain boundaries in an interstitial free steel
703
Plastic Deformations of Impulsively Loaded, Rigid-Plastic Beams
704
Plastic design of laterally patch loaded plates for ships
705
Plastic dissipation energy at a bimaterial crack tip under cyclic loading
706
Plastic dissipation in fatigue crack growth under mixed-mode loading
707
Plastic dissipation in mixed-mode fatigue crack growth along plastically mismatched interfaces
708
Plastic domain and ionic conductivity of (C4H9)4NI
709
Plastic electronics and future trends in microelectronics
710
Plastic Electronics and Their Packaging Technologies
711
Plastic energy and tearing energy of a NiTi shape memory alloy wire
712
Plastic energy dissipated during an earthquake as a function of structural properties and ground motion characteristics
713
Plastic enzyme-linked immunosorbent assays (ELISA)-on-a-chip biosensor for botulinum neurotoxin A
714
Plastic enzyme-linked immunosorbent assays (ELISA)-on-a-chip biosensor for botulinum neurotoxin A Original Research Article
715
Plastic failure analysis of an auxetic foam or inverted strut lattice under longitudinal and shear loads
716
Plastic failure risk of a metal matrix composite structure under variable thermal loads
717
Plastic failure risk of a metal matrix composite structure under variable thermal loads
718
Plastic fantastic
719
Plastic fibres as the only reinforcement for flat suspended slabs: Experimental investigation and numerical simulation
720
Plastic fibres as the only reinforcement for flat suspended slabs: Parametric study and design considerations
721
Plastic film mulch for half growing-season maximized WUE and yield of potato via moisture-temperature improvement in a semi-arid agroecosystem
722
Plastic flattening of a sinusoidal metal surface: A discrete dislocation plasticity study
723
Plastic flow and ductile rupture of a 2198 Al–Cu–Li aluminum alloy
724
Plastic flow and work hardening of Al alloy matrices during ultrasonic consolidation fibre embedding process
725
Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature Original Research Article
726
Plastic flow at equal channel angular processing in parallel channels
727
Plastic flow behavior of 7017 and 7055 aluminum alloys under different high strain rate test methods
728
Plastic flow behavior of a high-strength magnesium alloy NZ30K
729
Plastic flow behavior of Inconel 718 under dynamic shear loads
730
Plastic flow behaviour and formability of friction stir welded joints in AZ31 thin sheets obtained using the “pinless” tool configuration
731
Plastic flow behaviour in an alumina-forming austenitic stainless steel at elevated temperatures
732
Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample
733
Plastic flow in a composite: a comparison of nonlocal continuum and discrete dislocation predictions
734
Plastic flow instabilities of L12 Co3Ti alloys at intermediate temperatures Original Research Article
735
Plastic flow localization analysis of heterogeneous materials using homogenization-based finite element method
736
Plastic flow localization analysis of heterogeneous materials using homogenization-based finite element method
737
Plastic flow localization as a new kind of wave processes in solids
738
Plastic flow localization as a new kind of wave processes in solids
739
Plastic flow localization in h.c.p. Zr alloys on macro- and microscale levels
740
Plastic flow localization in mechanism-based strain gradient plasticity
741
Plastic flow localization in mechanism-based strain gradient plasticity
742
Plastic flow localization in mechanism-based strain gradient plasticity
743
Plastic flow of a nanocrystalline/amorphous Al90Fe5Gd5 composite formed by rolling
744
Plastic flow of coesite eclogite in a deep continent subduction regime: Microstructures, deformation mechanisms and rheologic implications
745
Plastic flow of martensitic model alloys
746
Plastic flow of martensitic model alloys
747
Plastic flow of martensitic model alloys
748
Plastic flow of omphacite in eclogites at temperatures below 500°C - implications for interplate coupling in subduction zones
749
Plastic flow of tungsten-based composite under hot compression
750
Plastic flow properties and fracture toughness characterization of unirradiated and irradiated tempered martensitic steels
751
Plastic flow softening in a bulk metallic glass Original Research Article
752
Plastic flow stability of metallic nanolaminate composites
753
Plastic flow stability of nanotwinned Cu foils
754
Plastic flow, necking and failure in metals, alloys and ceramics
755
Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion
756
Plastic foam filtration media: penetration characteristics against mass loading
757
Plastic forming and microstructural development of α-alumina ceramics from highly compacted green bodies using extrusion
758
Plastic forming of Al2O3 ceramic substrates
759
Plastic forming of alumina from coagulated suspensions
760
Plastic forming of the equal-channel angular pressing processed 6061 aluminum alloy
761
Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations Original Research Article
762
Plastic heterogeneity in nanoscale metallic glass
763
Plastic hinge analysis of FRP confined circular concrete columns
764
Plastic Hinge Integration Methods for Force-Based Beam–Column Elements
765
Plastic hinge length of FRP strengthened reinforced concrete columns subjected to both far-fault and near-fault ground motions
766
Plastic hinge relocation in RC joints as an alternative method of retrofitting using FRP
767
Plastic hinges development and crack stability analysis in a circular ring
768
Plastic identification based on molecular and elemental information from laser induced breakdown spectra: a comparison of plasma conditions in view of efficient sorting
769
Plastic identification by remote sensing spectroscopic NIR imaging using kernel partial least squares (KPLS)
770
Plastic in the Thames: A river runs through it
771
Plastic incompatibility stresses and stored elastic energy in plastically deformed copper
772
Plastic individuals and evolving populations
773
Plastic Ingestion by a Leatherback Turtle Dermochelys coriacea from the Azores (NE Atlantic)
774
Plastic ingestion by fulmars and shearwaters at Sable Island, Nova Scotia, Canada
775
Plastic ingestion by harbour seals (Phoca vitulina) in The Netherlands
776
Plastic ingestion by planktivorous fishes in the North Pacific Central Gyre
777
Plastic ingestion by Procellariiformes in Southern Brazil
778
Plastic ingestion by the northern fulmar (Fulmarus glacialis) in Iceland
779
Plastic ingestion in marine-associated bird species from the eastern North Pacific
780
Plastic instabilities and dislocation densities during plastic deformation in Al–Mg alloys
781
Plastic instabilities in porous cylinders under remote triaxial loading
782
Plastic instability and Lüders bands in the tensile test: the role of crystal orientation
783
Plastic instability behavior of bcc and hcp metals after low temperature neutron irradiation
784
Plastic instability criterion based on energy conversion
785
Plastic instability in dual-pressure tube-hydroforming process
786
Plastic instability in dual-pressure tube-hydroforming process
787
Plastic instability in dual-pressure tube-hydroforming process
788
Plastic instability in polycrystalline metals after low temperature irradiation Original Research Article
789
Plastic instability of Al–Mg alloys during stress rate change test
790
Plastic instability of beam structures using co-rotational elements Original Research Article
791
Plastic interaction relations for elliptical hollow sections
792
Plastic interaction relations for semi-elliptical hollow sections
793
Plastic J-integral calculations using the load separation method for the center cracked tension specimen
794
Plastic J-integral calculations using the load separation method for the double edge notch tension specimen
795
Plastic Joining of Ultra High Strength Steel and Aluminium Alloy Sheets by Self Piercing Rivet
796
Plastic lasers: Semiconducting polymers as a new class of solid-state laser materials
797
Plastic layer permeability estimation using a model of gas pressure in a coke oven
798
Plastic limit analysis of cylindrically orthotropic circular plates
799
Plastic limit analysis of defective casing for thermal recovery wells
800
Plastic limit analysis of ductile composite structures from micro- to macro-mechanical analysis
801
Plastic limit analysis of frames using ant colony systems
802
Plastic limit load analysis for steam generator tubes with local wall-thinning Original Research Article
803
Plastic limit load of plane frames with frictional contact supports
804
Plastic limit load of plane frames with frictional contact supports
805
Plastic limit load of plane frames with frictional contact supports
806
Plastic limit loads for cracked large bore branch junction
807
Plastic limit loads of defective pipes under combined internal pressure and axial tension
808
Plastic limit loads of defective pipes under combined internal pressure and axial tension
809
Plastic limit loads of defective pipes under combined internal pressure and axial tension
810
Plastic limit loads of defective square plates
811
Plastic limit state of the hollow sphere model with non-associated Drucker–Prager material under isotropic loading
812
Plastic Limit, Liquid Limit and Undrained Shear Strength of Soil-Reappraisal
813
Plastic litter in the sea
814
Plastic loads of elbows with local wall thinning under in-plane bending
815
Plastic loads of pipe bends under combined pressure and out-of-plane bending
816
Plastic material identification with spectroscopic near infrared imaging and artificial neural networks
817
Plastic mattresses and sudden infant death syndrome
818
Plastic mechanism analysis of circular tubes under pure bending
819
Plastic mechanism analysis of circular tubes under pure bending
820
Plastic mechanism analysis of circular tubes under pure bending
821
Plastic mechanism analysis of concrete-filled double-skin (SHS inner and SHS outer) stub columns
822
Plastic mechanism analysis of fabricated square and triangular sections under axial compression
823
Plastic mechanism analysis of steel SHS strengthened with CFRP under large axial deformation
824
Plastic mechanism analysis of unstiffened steel I-section beams strengthened with CFRP under 3-point bending
825
Plastic mechanism analysis of welded thin-walled T-joints made up of circular braces and square chords under in-plane bending
826
Plastic mechanism and elastic–analytical approaches applied to estimate the strength of an axially compressed-thin-walled channel steel section beam
827
Plastic mechanism and elastic–analytical approaches applied to estimate the strength of an axially compressed-thin-walled channel steel section beam
828
Plastic mechanisms database for thin-walled cold-formed steel members in compression and bending
829
Plastic Membrane Electrodes of Coated Wire Type for Micro Determination of Quininium Cation in Pharmaceutical Tablets
830
Plastic Membrane Selective Electrode for Cetirizinium Ion Based on Cetirizinium-Tetraphenylborate Ion-Pair
831
Plastic Membrane Selective Electrode for Cetirizinium Ion Based on Cetirizinium-Tetraphenylborate Ion-Pair
832
Plastic microchip liquid chromatography-matrix-assisted laser desorption/ionization mass spectrometry using monolithic columns
833
Plastic micromachining assisted by ultraviolet illumination
834
Plastic modal approximations in analyzing beam-on-beam collisions
835
Plastic models for analysis of fully anchored light-frame timber shear walls
836
Plastic modifications within inhibitory control networks induced by practicing a stop-signal task: An electrical neuroimaging study
837
Plastic molecular alloys: binary system 2-methyl-2-nitro-1-propanol/2,2-dimethyl-1,3-propanediol
838
Plastic mulching in agriculture—Friend or foe of N2O emissions?
839
Plastic multipliers as driving variables of numerical simulation in elastoplasticity
840
Plastic notch stress intensity factors for pointed V-notches under antiplane shear loading
841
Plastic Optical Fibre Sensors for Environmental Monitoring: Biofouling and Strain Applications
842
Plastic optimization of 3D steel frames under fixed or repeated loading: Reduction formulation
843
Plastic particles in coastal pelagic ecosystems of the Northeast Pacific ocean
844
Plastic pellets as oviposition site and means of dispersal for the ocean-skater insect Halobates
845
Plastic penetration during laser heating of a metal plate
846
Plastic pethidine hydrochloride membrane sensor and its pharmaceutical applications
847
Plastic pillar inserts for three-dimensional (3D) cell cultures in 96-well plates
848
Plastic pollution in the South Pacific subtropical gyre
849
Plastic pollution of the Kuril–Kamchatka Trench area (NW pacific)
850
Plastic potentials for anisotropic porous solids
851
Plastic pre-compression and creep damage effects on the fracture toughness behaviour of Type 316H stainless steel
852
Plastic Properties and Collapse Investigation of Fine-grained Soil Rehabilitated with Styrene Butadiene Rubber: A Case Study in Kerman, Iran
853
Plastic properties of icosahedral Al–Pd–Mn single quasicrystals
854
Plastic properties of icosahedral Al–Pd–Mn single quasicrystals
855
Plastic PVDF-HFP electrolyte laminates prepared by a phase-inversion process
856
Plastic ratcheting induced cracks in thin film structures
857
Plastic reference electrodes and plastic potentiometric cells with dispersion cast poly(3,4-ethylenedioxythiophene) and poly(vinyl chloride) based membranes
858
Plastic relaxation of the internal stress induced by twinning
859
Plastic response of a circular cylindrical shell to dynamic loadings
860
Plastic responses of 4 tree species of successional subalpine coniferous forest serals to different light regimes
861
Plastic scintillator bar with WLS fiber calorimeter for neutrino physics
862
Plastic scintillator bar with WLS fiber calorimeter for neutrino physics
863
Plastic scintillator centrality detector for BRAHMS
864
Plastic scintillator centrality detector for BRAHMS
865
Plastic scintillator produced by the injection-molding technique
866
Plastic scintillator produced by the injection-molding technique
867
Plastic scintillator with phosphorescent dopants for α-particles registration
868
Plastic scintillator with phosphorescent dopants for α-particles registration
869
Plastic scintillator-based radiation detector for mobile radiation detection system against nuclear/radiological terrorism
870
Plastic scintillator-based radiation detector for mobile radiation detection system against nuclear/radiological terrorism
871
Plastic scintillators with efficient neutron/gamma pulse shape discrimination
872
Plastic scintillators with efficient neutron/gamma pulse shape discrimination
873
Plastic shrinkage and deflection characteristics of coconut shell concrete slab
874
Plastic shrinkage cracking of blended cement concretes in hot environments
875
Plastic shrinkage cracking of blended cement concretes in hot environments
876
Plastic size effect analysis of lamellar composites using a discrete dislocation plasticity approach
877
Plastic sliding, strained states and current conversion in Density Waves
878
Plastic spin and evolution of an anisotropic yield condition
879
Plastic spin and evolution of an anisotropic yield condition
880
Plastic spin and evolution of an anisotropic yield condition
881
Plastic spin associated with a non-normality theory of plasticity
882
Plastic stents or covered self-expandable metal stents for benign biliary strictures: same song, different verse?
883
Plastic strain amplitude dependent surface path of microstructurally short fatigue cracks in face-centred cubic metals
884
Plastic strain amplitude dependent surface path of microstructurally short fatigue cracks in face-centred cubic metals
885
Plastic strain and strain gradients at very small indentation depths Original Research Article
886
Plastic strain characterization in austenitic stainless steels and nickel alloys by electron backscatter diffraction
887
Plastic strain distribution during splined-mandrel flow forming
888
Plastic strain distribution underneath a Vickers Indenter: Role of yield strength and work hardening exponent Original Research Article
889
Plastic strain localization and fatigue micro-crack formation in Hastelloy X
890
Plastic strain localization in metals: origins and consequences
891
Plastic strain-controlled short crack growth and fatigue life
892
Plastic strain-induced grain refinement at the nanometer scale in copper Original Research Article
893
Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy Original Research Article
894
Plastic strain-induced rafting of γ′ precipitates in Ni superalloys: Elasticity analysis Original Research Article
895
Plastic strains and the macroscopic critical plane orientations under combined bending and torsion with constant and variable amplitudes
896
Plastic strength of thin-walled plated members—Alternative solutions review
897
Plastic stress singularity near interface edge of elasto-plastic/elastic bi-material
898
Plastic stress–strain behavior of a Zr-based bulk metallic glass at high strain rates in the supercooled liquid region
899
Plastic stress-strain fields and limit loads of a plane strain cracked tensile panel with a mismatched welded joint
900
Plastic substrates based separation channels in electromigration techniques
901
Plastic Surgery and Acellular Dermal Matrix: Highlighting Trends from 1999 to 2013
902
Plastic surgery and pseudoxanthoma elasticum
903
Plastic Surgery and the Teenage Patient
904
Plastic surgery in a day surgery unit: 1 year’s experience
905
Plastic Surgery in Aberdeen
906
Plastic surgery in Hull
907
Plastic surgery in irradiated areas: analysis of 200 consecutive cases
908
Plastic surgery in the new millennium
909
Plastic surgery in the UK and the USA – comparisons and contrasts: some thoughts for the future in the UK
910
Plastic surgery in the undergraduate curriculum: the importance of considering studentsʹ perceptions
911
Plastic surgery repair of abdominal wall and pelvic floor defects
912
Plastic surgery research in the UK
913
Plastic surgery senior house officers in the UK and Ireland: academic background, publication rates and research plans
914
Plastic surgery waiting lists — is anyone listening? The static work activity profile (SWAP)
915
Plastic surgical training and the Internet: how plastic surgeons learn
916
Plastic Torsion and Related Problems
917
Plastic Torsional Buckling of Cruciform Compression Members
918
Plastic transformations: a method for building dependable distributed applications
919
Plastic velocity vector diagrams applied to indentation and transpression in the Alps
920
Plastic versus elastic deformation effects on magnetic Barkhausen noise in steel Original Research Article
921
Plastic viscosity of fresh concrete – A critical review of predictions methods
922
Plastic vs. Liquid Scintillation for 14C radiotracers determination in high salt matrices Original Research Article
923
Plastic waste elimination by co-gasification with coal and biomass in fluidized bed with air in pilot plant
924
Plastic wastes separation practice and disposal mechanism by households, hospitals, markets and waste management body
925
Plastic wastes, lube oils and carbochemical products as secondary feedstocks for blast-furnace coke production
926
Plastic Wave Propagation Model for Perforation of Metallic Plates by Blunt Projectiles
927
Plastic work and strain paths: the common geometric basis with phase stability
928
Plastic work and strain paths: the common geometric basis with phase stability
929
Plastic work approach for surface defect prediction in the hot bar rolling process
930
Plastic yield inception of an indented coated flat and comparison with a flattened coated sphere
931
Plastic yielding in cyclically loaded porous materials
932
Plastic yielding of a film adhesive under multiaxial stresses
933
Plastic yielding of a film adhesive under multiaxial stresses
934
Plastic yielding of semicrystalline polymers affected by amorphous phase
935
Plastic zone development in dynamic tear-type test specimens
936
Plastic zone near the crack tip in a material with strain anisotropy caused by loading along spatial rectilinear trajectories
937
Plastic zone of semi-infinite crack in planar kagome and triangular lattices
938
Plastic zone size measurement techniques for metallic materials
939
Plastic zones for a penny-shaped crack in a transversely isotropic layer bonded between two isotropic half spaces
940
Plastic η factor considering strength mismatch and crack location in narrow gap weldments
941
Plastic η factor solutions of homogeneous and bi-material SE(T) specimens for toughness and creep crack growth testing
942
Plastic/compact heat exchangers for single-effect desalination systems
943
Plastically deformed Ge-crystal wafers as elements for neutron focusing monochromator
944
Plastically deformed Ge-crystal wafers as elements for neutron focusing monochromator
945
Plastically deformed Si-crystal wafers for neutron-monochromator elements
946
Plastically deformed Si-crystal wafers for neutron-monochromator elements
947
Plastically deforming amorphous ZrO2-Al2O3 Original Research Article
948
Plastically deforming clay-rich sediment to help measure the average remanence anisotropy of its individual magnetic particles, and correct for paleomagnetic inclination shallowing
949
Plastically elastically dominant fatigue interaction in 316L stainless steel and 6061-T6 aluminium alloy
950
Plastic–damage seismic model for reinforced concrete frames Review Article
951
Plasticiser interactions with polymer and salt in PVC–LiCF3SO3–DMF electrolytes
952
Plasticisers: Principles and practice: Alan S. Wilson (The Institute of Materials, London, 1995), 316+ pages, $90.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, VT)
953
Plasticisers: Principles and practice: Alan S. Wilson (The Institute of Materials, London, 1995), 316+ pages, $90.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, VT)
954
Plasticity and ab initio characterizations on Fe4N produced on the surface of nanocrystallized 18Ni-maraging steel plasma nitrided at lower temperature
955
Plasticity and asperity-induced fatigue crack closure under mixed-mode loading
956
Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions
957
Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions
958
Plasticity and damage in cellular amorphous metals
959
Plasticity and damage in cellular amorphous metals Original Research Article
960
Plasticity and diversity of the phenology of dioecious Ficus species in Taiwan
961
Plasticity and drying behavior of terra cotta bodies in the presence of cellulose
962
Plasticity and fracture of martensitic boron steel under plane stress conditions
963
Plasticity and fracture of sapphire at room temperature: Load-controlled microcompression of four different orientations
964
Plasticity and functions of the orbital frontal cortex
965
Plasticity and Interfacial Dislocation Mechanisms in Epitaxial and Polycrystalline A1 Films Constrained by Substrates
966
Plasticity and microstructure of A356 matrix nano composites
967
Plasticity and microstructure of A356 matrix nano composites
968
Plasticity and structural instability in a bulk metallic glass deformed in the supercooled liquid region Original Research Article
969
Plasticity and topological defects in cellular structures: Extra matter, folds and crab moulting
970
Plasticity approach to shear design
971
Plasticity at a Cu/α-Al2O3 interface with nanovoids
972
Plasticity at really diminished length scales
973
Plasticity at the micron scale
974
Plasticity based material modelling of ice and its application to ship–iceberg impacts
975
Plasticity based stress–strain model for concrete confinement
976
Plasticity criterion for bulk amorphous alloys
977
Plasticity drop at temperatures above 1200 °C in the cast state of low carbon steels and its analysis
978
Plasticity effect on residual stresses measurement using contour method
979
Plasticity effects in dynamically loaded nickel aluminide bicrystals Original Research Article
980
Plasticity effects in incremental slitting measurement of residual stresses
981
Plasticity effects on fracture normal to interfaces with homogeneous and graded compositions
982
Plasticity enhancement in Zr based bulk metallic glass by sand blasting
983
Plasticity enhancement mechanisms in MoSi2
984
Plasticity enhancement mechanisms in MoSi2
985
Plasticity enhancement of a Zr-based bulk metallic glass by an electroplated Cu/Ni bilayered coating
986
PLASTICITY FACILITATES Anthemis cotula TO INVADE DIVERSE HABITATS
987
Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space
988
Plasticity improvement in a bulk metallic glass composed of an open-cell Cu foam as the skeleton
989
Plasticity improvement of ZrCu-based bulk metallic glass by ex situ dispersed Ta particles
990
Plasticity in an extended phenotype and reversed up-down asymmetry of spider orb webs
991
Plasticity in antiparasite behaviours and its suggested role in invasion biology
992
Plasticity in attention: Implications for stress response in children
993
Plasticity in caste-related exocrine secretion biosynthesis in the honey bee (Apis mellifera)
994
Plasticity in coloration as an antipredator strategy among zooplankton
995
Plasticity in constrained layers: model with point forces
996
Plasticity in female mate choice associated with changing reproductive states
997
Plasticity in juvenile hormone in male burying beetles during breeding: physiological consequences of the loss of a mate
998
Plasticity in learning and recovery: An introduction
999
Plasticity in mating behaviour drives asymmetric reproductive interference in whiteflies
1000
Plasticity in metric spaces
بازگشت