<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Properties of a YAP:Ce detector for high-energy X-ray counting experiments
2
Properties of a-C:H films deposited from a methane electron cyclotron wave resonant plasma
3
Properties of acid ammonium sulphate aerosols at low temperature
4
Properties of acid phosphatase–tannic acid complexes formed in the presence of Fe and Mn
5
Properties of acid phosphatase–tannic acid complexes formed in the presence of Fe and Mn
6
Properties of activated carbon controlling 2-Methylisoborneol adsorption Original Research Article
7
Properties of activated cokes used for flue gas treatment in industrial waste incineration plants
8
Properties of actuarially fair and pay-as-you-go health insurance schemes for the elderly. An OLG model approach
9
Properties of adaptive walks on uncorrelated landscapes under strong selection and weak mutation
10
PROPERTIES OF ADHESIVENESS NANO CARBOXYMETHYL CELLULOSE IN COMPARE WITH CARBOXYMETHYL CELLULOSE FOR PAPER CONSERVATION
11
Properties of adhesives and CPVC materials proposed for steel tank lining
12
Properties of adsorbates as open quantum systems
13
Properties of aerosol signature size distributions in the urban environment as derived by cluster analysis
14
Properties of aerosols from sugar-cane burning emissions in Southeastern Brazil
15
Properties of after-discharges from cortical electrical stimulation in focal epilepsies
16
Properties of Ag doped ZnTe thin films by an ion exchange process
17
Properties of aged mixed nickel–cobalt hydroxide intermediates produced from acid leach solutions and subsequent metal recovery
18
Properties of aging intensity function
19
Properties of Ag–Mg alloy sheathed Bi-2223 tapes Original Research Article
20
Properties of Al heavy-doped ZnO thin films by RF magnetron sputtering
21
Properties of Al2O3 ceramics consolidated with sulfanilic acid
22
Properties of Al2O3 nano-particle reinforced copper matrix composite coatings prepared by pulse and direct current electroplating
23
Properties of Al2O3–40 wt.% ZrO2 composite coatings from ultra-fine feedstocks by atmospheric plasma spraying
24
Properties of Al-doped ZnO thin films deposited by a chemical spray process
25
Properties of AlGaAs layers grown on Si by the conformal method
26
Properties of Alkali Activated Aluminosilicate Material after Thermal Load
27
Properties of alkali-activated clinoptilolite
28
Properties of Alkali-Activated Fly Ash Concrete Blended with Slag
29
Properties of alkali–alkaline earth metaphosphate glasses
30
Properties of alkyl-phosphatidylcholine monolayers in the presence of surface-active three-block copolymers
31
Properties of alloy steel coatings oxidized during plasma spraying
32
Properties of alloy steel coatings oxidized during plasma spraying
33
Properties of AlMgB14 hot pressed with additions of ZrB2 and HfB2
34
Properties of AlN coatings produced by RF sputtering method
35
Properties of AlN epitaxial layers on 6H–SiC substrate grown by sublimation in argon, nitrogen, and their mixtures
36
Properties of AlN grown by plasma enhanced atomic layer deposition
37
Properties of alumina based low-cement self flowing castable refractories
38
Properties of alumina coatings produced by gas-detonation method
39
Properties of alumina membrane-templated polypyrrole nanostructures
40
Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting
41
Properties of alumina supported Pd-Fe and Pt-Fe catalysts prepared using surface organometallic chemistry Original Research Article
42
Properties of alumina–titania coatings prepared by laser-assisted air plasma spraying
43
Properties of aluminium oxide coating on aluminium alloy produced by micro-arc oxidation
44
Properties of American option prices
45
Properties of ammoniated sulfate aerosols at low temperatures: why are the models so far off?
46
Properties of amorphous magnetic materials by magnetic force microscopy
47
Properties of amorphous Si thin film anodes prepared by pulsed laser deposition
48
Properties of amorphous SiAlON thin films grown by RF magnetron co-sputtering
49
Properties of amorphous silicon solar cells fabricated from SiH2Cl2
50
Properties of amorphous Si-rich silicon nitride prepared by rf-magnetron sputtering
51
Properties of amorphous ternary alloy ®lms a-SixCyGez:H prepared by magnetron co-sputtering
52
Properties of amorphous tin-doped indium oxide thin films deposited by O2/Ar mixture ion beam-assisted system at room temperature
53
Properties of amorphous ZrOx thin films deposited by filtered cathodic vacuum arc
54
Properties of amphiphilic oligonucleotide films at the air/water interface and after film transfer
55
Properties of an adaptive archiving algorithm for storing nondominated vectors
56
Properties of an Approximability-related Parameter on Circular Complete Graphs
57
Properties of an atom–bond additive representation of the interaction for benzene–argon clusters
58
Properties of an EG/Fe/C composite modified by ozone treatment
59
Properties of an electrospray emitter coated with material of low surface energy
60
Properties of an electrospray emitter coated with material of low surface energy
61
Properties of an Ezrin Mutant Defective in F-actin Binding
62
Properties of an inverse Gaussian mixture of bivariate exponential distribution and its generalization
63
Properties of an NAD+-dependent DNA ligase from the hyperthermophile Thermotoga maritima and its application in PCR amplification of long DNA fragments
64
Properties of an n-C:P/p-Si carbon-based photovoltaic cell grown by radio frequency plasma-enhanced chemical vapor deposition at room temperature
65
Properties of analogues of an intermediate in the process of mechanism-based inactivation of carboxypeptidase A Original Research Article
66
Properties of and Substrate Determinants for the Exonuclease Activity of Human Apurinic Endonuclease Ape1
67
Properties of anionic peroxidases purified from Chinese cabbage roots
68
Properties of anionic–cationic adsorption films:: Part 2
69
PROPERTIES OF ANISOTROPIC PHOTONIC BAND GAPS IN THREE-DIMENSIONAL PLASMA PHOTONIC CRYSTALS CONTAINING THE UNIAXIAL MATERIAL WITH DIFFERENT LATTICES
70
Properties of anisotropic s-wave superconductivity in MgB2
71
Properties of annealed anodically etched porous Zn studied by scanning tunneling microscopy
72
PROPERTIES OF APPROXIMATE BESSEL BEAMS AT MILLIMETER WAVELENGTHS GENERATED BY FRACTAL CONICAL LENS
73
Properties of aqueous dispersions of amylose–sodium palmitate complexes prepared by steam jet cooking
74
Properties of aqueous solutions of lentinan in the absence and presence of zwitterionic surfactants
75
Properties of architectural mortar prepared with recycled glass with different particle sizes
76
Properties of argon/oxygen mixture plasmas driven by multiple internal-antenna units
77
Properties of arsenic sulphide As4S4 nanoparticles prepared by high-energy milling
78
Properties of as-cast and structurally relaxed Zr-based bulk metallic glasses
79
Properties of AS-Cohen-Macaulay algebras Original Research Article
80
Properties of a-Si:H films deposited by RF magnetron sputtering at 95 °C
81
Properties of a-Si:H TFTs using silicon carbonitride as dielectric
82
Properties of a-SiC:H films and solar cells
83
Properties of a-SiO:H films prepared by RF glow discharge
84
Properties of Asphaltic Concrete Containing Sasobit®
85
Properties of As–Te alloys and their reactions with Zn substrate
86
Properties of asymmetrical evolving networks
87
Properties of Atanassov’s intuitionistic fuzzy relations and Atanassov’s operators
88
Properties of atoms in molecules from valence-electron densities augmented with core-electron contributions
89
Properties of autoclaved lightweight aggregate concrete
90
Properties of avalanche photodiodes for applications in high energy physics, astrophysics and medical imaging
91
Properties of avalanche photodiodes for applications in high energy physics, astrophysics and medical imaging
92
Properties of B4C/Al–B4C composite with a two-layer structure
93
Properties of B4C–PbO–Al(OH)3-epoxy nanocomposite prepared by ultrasonic dispersion approach for high temperature neutron shields
94
Properties of BaCe1−xTixO3 materials for hydrogen electrochemical separators
95
Properties of Bacillus cereus and other bacilli contaminating biomaterial-based industrial processes
96
Properties of Bacillus cereus Collected from Different Food Sources
97
Properties of bacteriochlorophyll c and bacteriopheophytin c in resting and stimulated lymphocytes
98
Properties of Ba-hexaferrite thin films with different thicknesses
99
Properties of baked foams based on cassava starch, sugarcane bagasse fibers and montmorillonite
100
Properties of ball milled thermally treated hemp fibers in an inert atmosphere for potential composite reinforcement
101
Properties of barium hexaferrite thick films deposited by electron beam evaporation
102
Properties of barium hexa-ferrite thin films dependent on sputtering pressure
103
Properties of barium-strontium titanate PTCR ceramics sintered on different powder beds
104
Properties of BaTiO3 synthesized from barium titanyl oxalate
105
Properties of BaTiO3 thin films deposited by radiofrequency beam discharge assisted pulsed laser deposition
106
Properties of Bayes testing procedures in order restricted inference
107
Properties of bcc metals by tight-binding total energy simulations
108
Properties of Bi-2223 thick films on a MgO substrate prepared by a coating method
109
Properties of Bi2O3 thin films prepared via a modified Pechini route
110
Properties of Bias and Variance of Two Multiallelic Estimators of FST
111
Properties of bid and ask reservation prices in the rank-dependent expected utility model
112
Properties of bilayers based on Mo films for transition-edge sensors
113
Properties of binary and ternary reactive MgO mortar blends subjected to CO2 curing
114
Properties of biocomposites based on lignocellulosic fillers
115
Properties of biodegradable blend films based on fish myofibrillar protein and polyvinyl alcohol as influenced by blend composition and pH level Original Research Article
116
Properties of biodegradable citric acid-modified granular starch/thermoplastic pea starch composites
117
Properties of biodegradable citric acid-modified granular starch/thermoplastic pea starch composites
118
Properties of biodegradable poly(propylene carbonate)/starch composites with succinic anhydride
119
Properties of biodegradable thermoplastic pea starch/carboxymethyl cellulose and pea starch/microcrystalline cellulose composites
120
Properties of Bio-Fermented Milk as Influenced with the Addition of Chicory (Cichorium intybus L) Roots Powder
121
Properties of biological activity of ten wild almond (Prunus amygdalus L.) species
122
Properties of biomass vs. coal fly ashes deposited in electrostatic precipitator
123
Properties of bio-oils produced by biomass fast pyrolysis in a cyclone reactor
124
Properties of biopolymers produced by transglutaminase treatment of whey protein isolate and gelatin
125
Properties of Bitumens Modified by Thermoplastic Elastomers
126
Properties of black soil humic acids from high altitude rocky complexes in Brazil
127
Properties of blended cements with thermally activated kaolin
128
Properties of blended sulfoaluminate belite cement
129
Properties of blocked linear systems
130
Properties of bonded-polypropylene-bead foams: data and modelling
131
Properties of boron and phosphorous incorporated tetrahedral amorphous carbon films grown using filtered cathodic vacuum arc process
132
Properties of boron doped Tl–Ba–Ca–Cu–O superconductors
133
Properties of boron/boron-nitride multilayers
134
Properties of branched polymer chains adsorbed on a patterned surface
135
Properties of Brazilian gasoline mixed with hydrated ethanol for flex-fuel technology
136
Properties of Bِrِczky tilings in high-dimensional hyperbolic spaces
137
Properties of bricks made using fly ash, quarry dust and billet scale
138
Properties of bricks with waste ferrochromium slag and zeolite
139
Properties of brush plated CdxZn1xTe thin films
140
Properties of BST ceramics prepared by high temperature hydrothermal process
141
Properties of buckytubes and derivatives Original Research Article
142
Properties of bulk-polymerized thermoplastic polyurethane nanocomposites
143
Properties of b-vex fuzzy mappings and applications to fuzzy optimization
144
Properties of C/C composites produced in one low cost manufacturing step
145
Properties of C2H2F4-based gas mixture for avalanche mode operation of resistive plate chambers
146
Properties of C2H2F4-based gas mixture for avalanche mode operation of resistive plate chambers
147
Properties of Calanus finmarchicus biomass during frozen storage after heat inactivation of autolytic enzymes
148
Properties of Calcium Carbonate/Mica and Calcium Farbonate/Talc Filled Polypropylene Composites
149
Properties of calcium phosphate coatings before and after exposure to simulated biological fluid
150
Properties of canned mengkudu (Morinda citrifolia L.) extract during storage
151
Properties of capsules containing rejuvenators for their use in asphalt concrete
152
Properties of carbodiimide treated heparin
153
Properties of carbon and iron modified TiO2 photocatalyst synthesized at low temperature and photodegradation of acid orange 7 under visible light
154
Properties of carbon fibre microelectrodes as a basis for enzyme biosensors
155
Properties of carbon films with a dose of titanium or zirconium prepared by magnetron sputtering
156
Properties of carbon materials, especially fibers, for field emitter applications
157
Properties of carbon nanotube nanofluids stabilized by cationic gemini surfactant
158
Properties of carbon nanotube–polymer composites aligned in a magnetic field Original Research Article
159
Properties of carbon nano-tubes–Cf/SiC composite by precursor infiltration and pyrolysis process
160
Properties of carbon nitride films produced by an inductively coupled plasma chemical vapor deposition
161
Properties of carbonized and activated spherulitic particles from aromatic polyimides
162
Properties of Carbon-Supported Platinum Catalysts: Role of Carbon Surface Sites
163
Properties of cardiac cells from dystrophic mouse
164
Properties of casein micelles in high pressure-treated bovine milk
165
Properties of casein micelles reformed from heated mixtures of milk and ethanol
166
Properties of cassava starch¯dicarboxylic acid complexes
167
Properties of catechol 1,2-dioxygenase from Pseudomonas putida immobilized in calcium alginate hydrogels
168
Properties of CdS nanocrystallites embedded in to thin ZrO2 waveguides
169
Properties of CdS nanocrystallites embedded in to thin ZrO2 waveguides
170
Properties of CdS thin films grown by CBD as a function of thiourea concentration
171
Properties of CdS:Ni films prepared by chemical bath deposition method
172
Properties of cellulose acetate nanofiltration membranes. Application to brackish water desalination Original Research Article
173
Properties of Cellulose Hydrogel from Kenaf Core Prepared via Pre-cooled Dissolving Method
174
Properties of cellulose/pectins composites: Implication for structural and mechanical properties of cell wall
175
Properties of cement kiln dust concrete
176
Properties of cement made by partially replacing cement raw materials with municipal solid waste ashes and calcium carbide waste
177
Properties of cement mortar incorporating de-inking waste-water from waste paper recycling
178
Properties of cement mortars containing clinoptilolite as a supplementary cementitious material
179
Properties of Cement Pastes Doped with Very ffigh Amounts of Ground Granulated Blast-Furnace Slag
180
Properties of cement waste composites
181
Properties of cement-free concrete cast by finely grained nanoslag with the NaOH-based alkali activator
182
Properties of cementitious materials in their dry state and their influences on viscosity of the cementitious pastes
183
Properties of cement—rice husk mixture
184
Properties of Central Symmetric X-Form Matrices
185
Properties of ceramic casting molds produced with two different binders
186
Properties of ceramic fiber reinforced cement composites
187
Properties of ceramic foam catalyst supports: mass and heat transfer Original Research Article
188
Properties of ceramic foam catalyst supports: one-dimensional and two-dimensional heat transfer correlations Original Research Article
189
Properties of ceramic foam catalyst supports: pressure drop Original Research Article
190
Properties of cerium–zirconium mixed oxides partially substituted by neodymium: Comparison with Zr–Ce–Pr–O ternary oxides
191
Properties of cermet fuels for minor actinides transmutation in ADS
192
Properties of certain analytic multivalent functions defined by a linear operator
193
Properties of Certain Families of 2k-Cycle-Free Graphs
194
Properties of certain phase transition fronts in geothermal porous reservoirs
195
Properties of certain piecewise polynomial product integration rules Original Research Article
196
Properties of certain sequences related to Stirlingʹs approximation for the gamma function
197
Properties of certain subclasses of meromorphic functions with positive coefficients
198
Properties of Ce–Zr–La–O nano-system with ruthenium modified surface
199
Properties of Cf/SiC composites modified by a boron- containing phase
200
Properties of CF4 and isobutane for use in microstrip gas counters
201
Properties of CF4 and isobutane for use in microstrip gas counters
202
Properties of CFTs dual to charged BTZ black hole Original Research Article
203
Properties of CHAPS micelles modulated by different polyelectrolytes
204
Properties of char particles obtained under O2/N2 and O2/CO2 combustion environments
205
Properties of charcoal derived from hazelnut shell and the production of briquettes using pyrolytic oil
206
Properties of charge and magnetic impurities in a spin-polarized electron gas: A semiclassical approach
207
Properties of charge states in MOS structure with ultrathin oxide layer
208
Properties of charmed and bottom hadrons in nuclear matter: a plausible study
209
Properties of chemical vapour deposited nanocrystalline TiO2 thin films and their use in dye-sensitized solar cells
210
Properties of chemical vapour deposited nanocrystalline TiO2 thin films and their use in dye-sensitized solar cells
211
Properties of chemically prepared polypyrrole with an aqueous solution containing Fe2(SO4)3, a sulfonic surfactant and a phenol derivative
212
Properties of chiral polyaniline in various oxidation states
213
Properties of chitosan containing PP-g-AA-g-NIPAAm bigraft nonwoven fabric for wound dressing
214
Properties of chitosan films prepared under different drying conditions Original Research Article
215
Properties of Chloroformyl Peroxynitrate, ClC(O)OONO2
216
Properties of chrysene in the higher triplet excited state
217
Properties of CMK-8 carbon replicas obtained from KIT-6 and pyrrole at various contents of ferric catalyst
218
Properties of CMR composites
219
Properties of CMV cation exchange membranes in sulfuric acid media
220
Properties of Co(1120)/Mo(100)/MgO(100) bilayers
221
Properties of CO2 laser-welded butt joints of dissimilar magnesium alloys
222
Properties of coarse particles in the atmosphere of the United Kingdom
223
Properties of Coating Systems During the Initial Period of Deep-Fat Frying as Affected by Flour Type, Temperature and Pressure
224
PROPERTIES OF COCONUT SHELL ACTIVATED CARBON
225
Properties of co-deposited layers on graphite high heat flux components at the TEXTOR tokamak
226
Properties of coexisting fluid phases of a binary system methanolethane by computer simulation
227
Properties of cold-active uracil-DNA glycosylase from Photobacterium aplysiae GMD509, and its PCR application for carryover contamination control
228
Properties of collagen from barramundi (Lates calcarifer) skin
229
Properties of collagen from skin, scale and bone of carp (Cyprinus carpio)
230
Properties of columns with several pyridinium and imidazolium ionic liquid stationary phases
231
Properties of comet 9P/Tempel 1 dust immediately following excavation by deep impact
232
Properties of Compact Food Bars: A Review Study
233
Properties of compatible solutes in aqueous solution Original Research Article
234
Properties of competitively adsorbed BSA and fibrinogen from their mixture on mixed and hybrid surfaces
235
Properties of complex ammonium nitrate-based fertilizers depending on the degree of phosphoric acid ammoniation
236
Properties of complexes of galactomannan of Leucaena leucocephala and Al3+, Cu2+ and Pb2+
237
Properties of composite BxCyNz nanotubes and related heterojunctions
238
Properties of composite films of titania nanofibers and Safranin O dye
239
Properties of composite materials with polymer matrix reinforced with Nd–Fe–B hard magnetic particles
240
Properties of composite membranes based on sulfonated poly(ether ether ketone)s (SPEEK)/phenoxy resin (PHR) for direct methanol fuel cells usages
241
Properties of composite proton-conducting membranes prepared from three-dimensionally ordered macroporous polyimide matrix and polyelectrolyte
242
Properties of composites formed from pitch resin and carbon fibers
243
Properties of composites of carbon nanotube fibres
244
Properties of compositionally graded Ba(1−x)SrxTiO3 self-standing thick films
245
Properties of Compounds Citral and Geraniol on Trichomonas gallinae: Activity in Vitro and Cytotoxicity
246
Properties of compressed lateritic soil stabilized with a burnt clay–lime binder: Effect of mixture components
247
Properties of Compressed Stabilized Earth Blocks (CSEB) For Low- Cost Housing Construction: A Preliminary Investigation
248
Properties of comultiplications on a wedge of spheres
249
Properties of concrete containing fungal treated waste foundry sand
250
Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures
251
Properties of concrete containing scrap-tire rubber – an overview
252
Properties of concrete containing used engine oil
253
Properties of concrete containing waste glass
254
Properties of concrete contains mixed colour waste recycled glass as sand and cement replacement
255
Properties of concrete incorporating fine recycled aggregate
256
Properties of concrete incorporating fly ash and ground granulated blast-furnace slag
257
Properties of concrete incorporating high volumes of class F fly ash and san fibers
258
Properties of concrete incorporating nano-silica
259
Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA)
260
Properties of concrete made with recycled aggregate from partially hydrated old concrete
261
Properties of concrete made with recycled crushed glass at elevated temperatures
262
Properties of concrete pavements prepared with ferrochromium slag as concrete aggregate
263
Properties of concrete paving blocks made with waste marble
264
Properties of concrete pedestrian block mixed with crumb rubber
265
Properties of concrete prepared with crushed fine stone, furnace bottom ash and fine recycled aggregate as fine aggregates
266
Properties of concrete prepared with low-grade recycled aggregates
267
Properties of concrete prepared with PVA-impregnated recycled concrete aggregates
268
Properties of concrete produced from multicomponent blended cements
269
Properties of concrete reinforced with different kinds of industrial waste fibre materials
270
Properties of concrete using high C3S cement with ground granulated blast-furnace slag
271
Properties of concrete using metallurgical industrial by-products as aggregates
272
Properties of Concrete using Tanjung Bin Power Plant Coal Bottom Ash and Fly Ash
273
Properties of concrete with a new type of saponin air-entraining agent
274
Properties of Concretes Produced with Waste Ceramic Tile Aggregate
275
Properties of Concretes Produced with Waste Ceramic Tile Aggregate
276
Properties of concretes produced with waste concrete aggregate
277
Properties of concretes with Black/Oxidizing Electric Arc Furnace slag aggregate
278
Properties of conductive polymer films deposited by infrared laser ablation
279
Properties of confined fibre-reinforced concrete under uniaxial compressive impact
280
Properties of connected graphs having minimum degree distance
281
Properties of containing Sn nanoparticles activated carbon fiber for a negative electrode in lithium batteries
282
Properties of Contra Sg-Continuous Maps
283
Properties of Contra Sg-Continuous Maps
284
Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust
285
Properties of controlled low-strength materials incorporating cement kiln dust and slag
286
Properties of convergence for the q-Meyer-König and Zeller operators ✩
287
Properties of convergence for ω, q-Bernstein polynomials ✩
288
Properties of copolymer of 2,2′:5′,2″-terthiophene-5,5″-dicarboxylic acid and polyethylene oxide
289
Properties of copper matrix reinforced with various size and amount of Al2O3 particles
290
Properties of copper phthalocyanine microencapsulated in polystyrene by phase separation
291
Properties of copper reinforced by laser-generated Al2O3-nanoparticles
292
Properties of copper-doped ZnTe thin films by immersion in Cu solution
293
Properties of copper–stainless steel HIP joints before and after neutron irradiation
294
Properties of cork oak wood related to solid wood flooring performance
295
Properties of corrosion resistance in C++W+ dual implanted steel with nanometer phases
296
Properties of cosmic ray interactions at PeV energies
297
Properties of craters on the Achaia region of Asteroid (21) Lutetia
298
Properties of crosslinked polylactides (PLLA & PDLA) by radiation and its biodegradability
299
Properties of crosslinked ultra-high-molecular-weight polyethylene
300
Properties of Cross-Rolled Low Alloy White Cast Iron Grinding Ball Original Research Article
301
Properties of crumb rubber hollow concrete block
302
Properties of cryobrines on Mars
303
Properties of cryo-drawn copper with severely twinned microstructure
304
Properties of Cs2.5 salts of transition metal M substituted Keggin-type M1−xPV1MxMo11−xO40 heteropolyoxometallates in propane oxidation Original Research Article
305
Properties of CsI(Tl) crystals and their optimization for calorimetry of high energy photons
306
Properties of CsI(Tl) crystals and their optimization for calorimetry of high energy photons
307
Properties of Cs-intercalated single wall carbon nanotubes investigated by 133Cs Nuclear Magnetic resonance Original Research Article
308
Properties of Cu film and Ti/Cu film on polyimide prepared by ion beam techniques
309
Properties of Cu films on Pt(1 1 1) revealed by AES, LEED, and DEPES
310
Properties of Cu2ZnSn(SxSe1−x)4 thin films prepared by one-step sulfo-selenization of alloyed metal precursors
311
Properties of cubic (In,Ga)N grown by molecular beam epitaxy
312
Properties of cubic (In,Ga)N grown by molecular beam epitaxy
313
Properties of cubic GaN grown by MBE
314
Properties of cubic GaN grown by MBE
315
PROPERTIES OF CUCUMBER BULGARIAN LATENT VIRUS, A NEW SPECIES IN THE GENUS TOMBUSVIRUS
316
Properties of cucurbita pepo l. In islamic persian medicine
317
Properties of Cu-doped ZnO films by RF sputtering method: Thickness dependence
318
Properties of CuIn(SxSe1−x)2 polycrystalline thin films prepared by chemical spray pyrolysis Original Research Article
319
Properties of CuInxGa1−xSe2 thin films grown from electrodeposited precursors with different levels of selenium content
320
Properties of cupric oxide coatings prepared by cathodic arc deposition
321
Properties of CVD alumina–titania composite films grown at different CO2/H2 inputs
322
Properties of cyclic subspace regression
323
Properties of cylindrical shells submerged in seawater
324
Properties of dairy-manure-derived biochar pertinent to its potential use in remediation
325
Properties of Danish biofuels and the requirements for power production
326
Properties of D-branes in matrix model of IIB superstring
327
Properties of dc magnetron sputtered Cu2O films prepared at different sputtering pressures
328
Properties of deep etched trenches in silicon: Role of the angular dependence of the sputtering yield and the etched species redeposition
329
Properties of Defect Modes in One-Dimensional Optically Induced Photonic Lattices
330
PROPERTIES OF DEFECT MODES IN ONE-DIMENSIONAL PHOTONIC CRYSTALS
331
Properties of delta functions of a class of observables on white noise functionals
332
Properties of dental resins submitted to pH catalysed hydrolysis
333
Properties of dental resins submitted to pH catalysed hydrolysis
334
Properties of descriptor systems arising from bond graph models Original Research Article
335
Properties of design-based functional principal components analysis
336
Properties of diacetyl (acetoin) reductase from Bacillus stearothermophilus Original Research Article
337
Properties of diclofenac sodium sorption onto natural zeolite modified with cetylpyridinium chloride
338
Properties of different temperature annealed Cu(In,Ga)Se2 and Cu(In,Ga)2Se3.5 films prepared by RF sputtering
339
Properties of Dilute Aqueous Solutions of Double-Chain Surfactants, Alkyldodecyldimethylammonium Bromides with a Change in the Length of the Alkyl Chains
340
Properties of Direct Aluminium Bonded Substrates for Power Semiconductor Components
341
Properties of discharge in the narrow gap glass RPC
342
Properties of discharge in the narrow gap glass RPC
343
Properties of Discrete Reversed Aging Intensity Function
344
Properties of discrete X-ray sources in the starburst spiral galaxy M 83
345
Properties of dissolved organic matter derived from silver birch and Norway spruce stands: Degradability combined with chemical characteristics
346
Properties of dissolved organic matter derived from silver birch and Norway spruce stands: Degradability combined with chemical characteristics
347
Properties of distributions and correlation integrals for generalised versions of the logistic map
348
Properties of disturbance waves in vertical annular two-phase flow Original Research Article
349
Properties of DLC thin films produced by RF PE−CVD from pyrrole monomer
350
Properties of domain walls and magnetoresistance in low-doped La2− y SryCuO4
351
PROPERTIES OF DOMIATI CHEESE AS AFFECTED BY BLENDING VARIOUS MILKINGS AND COLD STORAGE OF BUFFALO’S MILK
352
Properties of doped ceria solid electrolytes in reducing atmospheres
353
Properties of doped ZnO thin films grown by simultaneous dc and RF magnetron sputtering
354
Properties of Dough and Flat Bread Containing Wheat Germ
355
Properties of droplet formation made by cone jet using a novel capillary with an external electrode
356
Properties of DU–10 wt% Mo alloys subjected to various post-rolling heat treatments Original Research Article
357
Properties of dual codes defined by nondegenerate forms
358
Properties of dust in the Mars atmosphere: a revised analysis of Phobos/KRFM data
359
Properties of Dy-doped ZnO nanocrystalline thin films prepared by pulsed laser deposition
360
Properties of early-stage concrete with setting-accelerating tablet in cold weather
361
Properties of Edge-Deleted Distance Stable Graphs
362
Properties of Edge-Deleted Distance Stable Graphs
363
Properties of effective interactions and the excitation of image states in 28Si Original Research Article
364
Properties of eigenfunction expansion form for the rigid line problem in dissimilar media
365
Properties of eight methacrylated beta-cyclodextrin composite formulations
366
Properties of ejecta generated at high-velocity perforation of thin bumpers made from different constructional materials
367
PROPERTIES OF ELASTIC FORCES AT HIGH PRESSURE
368
Properties of elastic polyaniline
369
Properties of elastomeric calcium phosphate cement–chitosan composites
370
Properties of electrodes on HgI2 polycrystalline films
371
Properties of electrodes on HgI2 polycrystalline films
372
Properties of electroless Ni–P deposition of glass substrates using a mercapto organosilanes for functional groups to graft palladium
373
Properties of electroless Ni-W-P amorphous alloys
374
Properties of electrolyte solutions relevant to high concentration chloride leaching I. Mixed aqueous solutions of hydrochloric acid and magnesium chloride
375
Properties of electrolyte solutions relevant to high concentration chloride leaching. II. Density, viscosity and heat capacity of mixed aqueous solutions of magnesium chloride and nickel chloride measured to 90 °C
376
Properties of electrolyte solutions relevant to high concentration chloride leaching. III. Solubility of pertinent solids and iron(III)/iron(II) redox potential measured in concentrated magnesium chloride solutions
377
PROPERTIES OF ELECTROMAGNETIC FIELDS AND EFFECTIVE PERMITTIVITY EXCITED BY DRIFTING PLASMA WAVES IN SEMICONDUCTOR-INSULATOR INTERFACE STRUCTURE AND EQUIVALENT TRANSMISSION LINE TECHNIQUE FOR MULTI-LAYERED STRUCTURE
378
Properties of electrons near a Van Hove singularity
379
Properties of electroplated copper thin film and its interfacial reactions in the EPCu/IMPCu/IMPTaN/SiO2/Si multilayer structure
380
Properties of electropolymerised polypyrrole thin film on silver
381
Properties of electrospun CdS and CdSe filled poly(methyl methacrylate) (PMMA) nanofibres
382
Properties of Endogenous Post-Stratified Estimation using remote sensing data
383
Properties of endogenous β-glucosidase of a Pichia anomala strain isolated from Sicilian musts and wines
384
Properties of endogenous β-glucosidase of a Saccharomyces cerevisiae strain isolated from Sicilian musts and wines
385
Properties of endohedral N@C60 Original Research Article
386
Properties of engineered vascular constructs made from collagen, fibrin, and collagen–fibrin mixtures
387
Properties of ENR-50 Based Electrolyte System
388
Properties of epoxide hydrolase from Aspergillus niger for the hydrolytic kinetic resolution of epoxides in pure organic media
389
Properties of Epoxy Resins Modified with Liquid Crystalline Polyurethane
390
Properties of Epoxy Systems with Clay Nanocomposites
391
Properties of epoxy-amine networks containing nanostructured ether-crosslinked domains
392
Properties of EPS RHA lightweight concrete bricks under different curing conditions
393
Properties of equal bodies in contact with friction
394
Properties of equilibrium asset prices under alternative learning schemes
395
Properties of ERS-1/2 coherence in the Siberian boreal forest and implications for stem volume retrieval
396
Properties of estimators of count data model with endogenous switching Original Research Article
397
Properties of Eu-doped zinc oxide thin films grown on glass substrates by radio-frequency magnetron sputtering
398
Properties of eutectic Ru–Al alloy produced by ingot metallurgy
399
Properties of eutectic Ru–Al alloy produced by ingot metallurgy
400
PROPERTIES OF EVET ‘YES’ IN SPOKEN TURKISH: EVIDENCE FROM THE SPOKEN TURKISH CORPUS
401
Properties of Evolutionarily Stable Learning Rules
402
Properties of excited states of aqueous tryptophan
403
Properties of exciton states in GaAs/AlGaAs quantum wells in the presence of a quasi-two-dimensional electron gas
404
Properties of Exercise Strategies
405
Properties of expected costs and performance measures in stochastic models of scheduled transport
406
Properties of experimental urethane dimethacrylate-based dental resin composite blocks obtained via thermo-polymerization under high pressure
407
Properties of expitaxial Pb1−xSnxSe on CaF2 covered Si(111) substrates
408
PROPERTIES OF EXTENDED IDEAL BASED ZERO DIVISOR GRAPH OF A COMMUTATIVE RING
409
Properties of extended predictive control
410
Properties of extreme point rainfall I: Results from a rain gauge system in Denmark
411
Properties of extreme point rainfall II: Parametric data interpretation and regional uncertainty assessment
412
Properties of extreme point rainfall III: Identification of spatial inter-site correlation structure
413
Properties of extremely thin silicon layer in silicon-on-insulator structure formed by smart-cut technology
414
PROPERTIES OF EXTRUDATES FROM SORGHUM VARIETIES
415
Properties of factorial cumulant to factorial moment ratio
416
Properties of family 79 β-glucuronidases that hydrolyze β-glucuronosyl and 4-O-methyl-β-glucuronosyl residues of arabinogalactan-protein Original Research Article
417
Properties of faujasite zeolites containing methyl-substituted ammonium cations
418
Properties of fault populations in the Gullfaks Field, northern North Sea
419
Properties of Fe2O3 coating on polymer substrate by ion beam mixing
420
Properties of Fe–Cr based alloys as interconnects in a solid oxide fuel cell
421
Properties of feedback solitons in a single-mirror experiment
422
Properties of ferroelectric films based on Nb-modified PZT produced by PLD technique
423
Properties of ferroelectric thin films with a first-order phase transitions
424
Properties of ferroelectric ultrathin films from first principles
425
Properties of Ferrofluid Nanoparticles Prepared by Coprecipitation and Acid Treatment
426
Properties of ferromagnetic superconductors
427
Properties of few-body systems in relativistic quantum mechanics and constraints from transformations under Poincaré space-time translations Original Research Article
428
Properties of Fibonacci languages Original Research Article
429
Properties of field emission from high voltage RF antenna
430
Properties of fillers and reinforcing fibers
431
Properties of film from cuttlefish (Sepia pharaonis) skin gelatin incorporated with cinnamon, clove and star anise extracts
432
Properties of filmogenic solutions of gliadin crosslinked with 1-(3-dimethyl aminopropyl)-3-ethylcarbodiimidehydrochloride/N-hydroxysuccinimide and cysteine
433
Properties of films and fibers obtained from Lewis acid–base complexed nylon 6,6
434
Properties of fine scale piezoelectric PZT fibers with different Zr content
435
Properties of fine-grained steels generated by displacive transformation
436
Properties of fish skin gelatin film incorporated with seaweed extract Original Research Article
437
Properties of flaky affinity resin with co-continuous structure Original Research Article
438
Properties of flash hydrated and agglomerated particles of CFB fly ashes
439
Properties of flexible DLC film deposited by amplitude-modulated RF P-CVD
440
Properties of flexible heterojunction based on ITO/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/pentacene/Al
441
Properties of Flours and Starches as Affected by Rough Rice Drying Regime.
442
Properties of fluorescent dissolved organic matter in the Gironde Estuary
443
Properties of fluoridated hydroxyapatite–alumina biological composites densified with addition of CaF2
444
Properties of fluoride-releasing light-activated resin cement
445
Properties of fluorinated amorphous diamond like carbon films by PECVD
446
Properties of fluorine doped ZnO thin films deposited by magnetron sputtering
447
Properties of fluoroelastomer/semicrystalline perfluoropolymer nano-blends
448
Properties of fluorophores on solid phase resins; implications for screening, encoding and reaction monitoring
449
Properties of fly ash concrete modified with hydrated lime and silica fume
450
Properties of fly ash from forest biomass combustion
451
Properties of fly ash geopolymer concrete designed by Taguchi method
452
Properties of foam films stabilized with tetraethylammonium perfluorooctane-sulfonate
453
Properties of Folate Binding Protein Purified from Cow’s Milk
454
Properties of foreign exchange risk premiums
455
Properties of fork/join queueing networks with blocking under various operating mechanisms
456
Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol–gel method
457
Properties of Four Local Apple Varieties from NorthWest of Iran and Bruise Damage of Them Related to Drop Height
458
Properties of four partial orders on standard Young tableaux
459
Properties of Free Baxter Algebras
460
Properties of frequency distributions induced by general ‘up-and-down’ methods for estimating quantiles
461
Properties of fresh and hardened concrete Review Article
462
Properties of fresh SCC mix reinforced by different types of steel and polymer fibre
463
Properties of freshly mixed carbon fibre reinforced self-consolidating concrete
464
Properties of freshly mixed self-consolidating concretes incorporating rice husk ash as a supplementary cementing material
465
Properties of friction welds between 9Cr-ODS martensitic and ferritic–martensitic steels
466
Properties of Fructose-1,6-Bisphosphate Aldolase from Escherichia coli: An NMR Analysis
467
Properties of function spaces reflected by uniformly dense subspaces
468
PROPERTIES OF FUNCTIONAL SOFT CHEESE FORTIFIED WITH GINGER EXTRACT
469
PROPERTIES OF FUNCTIONAL SOFT CHEESE MADE BY USING BLENDS OF ARTICHOKE (Cynara cardunculus L.) INSTEAD OF CHYMOSIN AS COAGULANT
470
Properties of functionalized redox-active monolayers on thin silicon dioxide-a study of the dependence of retention time on oxide thickness
471
Properties of functionalized redox-active monolayers on thin silicon dioxide-a study of the dependence of retention time on oxide thickness
472
Properties of Fuzzy Norm of fuzzy Bounded Operators
473
Properties of fuzzy relations and aggregation process in decision making
474
Properties of Ga1−x Mnx N epilayers grown by plasma-assisted molecular beam epitaxy using Raman spectroscopy
475
Properties of GaAs films deposited by pulse periodic technique
476
Properties of GaAs/InGaAs quantum well solar cells under low concentration operation
477
Properties of GaAsN/GaAs quantum wells studied by optical detection of cyclotron resonance
478
Properties of galactic B[e] supergiants II. HDE 327083
479
Properties of Ga–La–Na sulphide glasses
480
Properties of gallium arsenide purified by zone refining and zone levelling
481
Properties of gallium arsenide purified by zone refining and zone levelling
482
Properties of GaMnAs layers grown by migration enhanced epitaxy at very low substrate temperatures
483
Properties of GaN and AlGaN Schottky contacts revealed from I–V–T and C–V–T measurements
484
Properties of gap-aggregate gradation asphalt mixture and permanent deformation
485
Properties of gas sparged coal tar pitch compositions Original Research Article
486
Properties of Gd2O3:Eu3+, Tb3+ nanopowders obtained by sol–gel process
487
Properties of gel electrolytes based on PVdF/HFP containing anion receptors
488
Properties of gelatins from skins of fish—black tilapia (Oreochromis mossambicus) and red tilapia (Oreochromis nilotica)
489
Properties of gels from mixed agar and fish gelatin
490
PROPERTIES OF GENERALIZED BERWALDCONNECTIONS
491
Properties of generic altitude functions
492
Properties of generic and almost every mappings in
493
Properties of geopolymer from circulating fluidized bed combustion coal bottom ash
494
Properties of geopolymer with seeded fly ash and rice husk bark ash
495
Properties of geopolymerised low-calcium bottom ash aggregate cured at ambient temperature
496
Properties of geothermal fluids in Switzerland: A new interactive database
497
Properties of giant vesicles
498
Properties of glass concrete reinforced with short basalt fibre
499
PROPERTIES OF GLASS FIBRE REINFORCED GEOPOLYMER CONCRETE COMPOSITES
500
Properties of glasses based on the CaO–MgO–SiO2 system for low-temperature co-fired ceramic
501
Properties of glasses from fluoride to phosphate composition
502
Properties of Gliricidia Wood (Gliricidia sepium) Intercropped with Cocoa (Theobroma cocoa) in Malaysia
503
Properties of glucose sensors based on the immobilization of glucose oxidase in N-substituted polypyrrole film
504
Properties of glucose sensors prepared by the electropolymerization of pyrroles containing phosphatidylcholine (II)
505
Properties of graded TiCxNy coatings deposited by a low-temperature HCD ion coating technique
506
Properties of graphite composites based on natural and synthetic graphite powders and a phenolic novolac binder
507
Properties of graphite prepared from boron-doped pitch as an anode for a rechargeable Li ion battery Original Research Article
508
Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell
509
Properties of graphitized boron-doped coal-based coke powders as anode for lithium-ion batteries
510
Properties of graphs preserved by relational graph rewritings
511
Properties of green concrete containing stainless steel oxidizing slag resource materials
512
Properties of Gröbner Bases and Applications to Doubly Periodic Arrays
513
Properties of groove chambers
514
Properties of groove chambers
515
Properties of Groundnut Shell (Arachis Hypogaea) Ash Blended Portland cement
516
Properties of Groups for the Cage and Degree/Diameter Problems
517
Properties of groups with points
518
Properties of gum exudates from selected Albizia species from Tanzania
519
Properties of hadrons in a chiral model with (axial-)vector mesons
520
Properties of hadrons in a chiral model with (axial-)vector mesons
521
Properties of halloysite nanotubes-filled natural rubber prepared using different mixing methods
522
Properties of halo nuclei from atomic isotope shifts Original Research Article
523
Properties of h-convex functions related to the Hermite Hadamard Fejér inequalities
524
Properties of heat-treated aluminium foams
525
Properties of heat-treated calcium phosphate coatings deposited by high-velocity oxy-fuel (HVOF) spray
526
Properties of heat-treated composites after aging in water
527
Properties of heavily W-doped TiO2 films deposited on Al2O3-deposited glass by simultaneous rf and dc magnetron sputtering
528
Properties of heavy nuclei measured at the GSI SHIP Original Research Article
529
Properties of heavyweight concrete produced with barite
530
Properties of Helium bubbles in Fe and FeCr alloys
531
Properties of hemispherical cups drawn using a flexible tool
532
Properties of heterotic vacua from superpotentials Original Research Article
533
Properties of hexagonal Al2Ge2RE (RE=Y,La,Ce,Nd,Eu,Gd,Tb,Y b and Lu) : A first-principles study
534
Properties of HgCdTe films obtained by laser deposition on a sapphire
535
Properties of high ash char particles derived from inertinite-rich coal: 1. Chemical, structural and petrographic characteristics
536
Properties of high ash coal-char particles derived from inertinite-rich coal: II. Gasification kinetics with carbon dioxide
537
Properties of High Basicity Mold Fluxes for Peritectic Steel Slab Casting Original Research Article
538
Properties of high nitrogen content mixed alkali earth oxynitride glasses (AExCa1−x)1.2(1)SiO1.9(1)N0.86(6), AE = Mg, Sr, Ba
539
Properties of high performance concrete containing fine-ground ceramics as supplementary cementitious material
540
Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates
541
Properties of high specific strength Al–4 wt.% Al2O3/B4C nano-composite produced by accumulative roll bonding process
542
Properties of high strength Al85La10Ni5 alloy
543
Properties of high strength Al85La10Ni5 alloy
544
Properties of high strength Al85La10Ni5 alloy
545
Properties of High Strength Concrete Containing Stone Powder as Natural Pozzolanic Materials
546
Properties of high strength concrete using white and dune sands under normal and autoclaved curing
547
Properties of High Velocity Suspension Flame Sprayed (HVSFS) TiO2 coatings
548
Properties of higher-order phase transitions Original Research Article
549
Properties of high-j/sub c/ SINIS junctions
550
Properties of high-k Ti1−xSixO2 gate dielectric layers prepared at room temperature
551
Properties of highly oriented K(Sr,Ba)2Nb5O15 thin films derived from a metal-alkoxide precursor solution
552
Properties of highly oriented spray-deposited fluorine-doped tin oxide thin films on glass substrates of different thickness Original Research Article
553
Properties of highly syndiotactic poly(vinyl alcohol)
554
PROPERTIES OF HIGH-ORDER HARMONIC GENERATION SIGNALS FROM SWITCHED-OFF ALIGNED MOLECULES
555
Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates
556
PROPERTIES OF HIGH-SPEED STEEL WORK ROLLS FOR HOT-ROLLING MILLS
557
Properties of high-strength steel fiber-reinforced concrete beams in bending
558
Properties of high-strength steel fiber-reinforced concrete beams in bending
559
Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode
560
Properties of high-volume fly ash concrete incorporating nano-SiO2
561
Properties of Hirsch-type indices: the case of library classification categories
562
Properties of hitting times for -martingales and their applications
563
Properties of hollow bent output tips in CO2 laser light delivery system
564
Properties of homo- and heteronuclear mixed biscarbene complexes with conjugated bithiophene units
565
Properties of hot residual nuclei produced in pA reactions
566
Properties of Hot-Pressed A1(2)O(3)-Fe Composites
567
Properties of hot-pressed of SiC/Si3N4 nanocomposites
568
Properties of HPC for PC dome of NPR Kaiga
569
Properties of HPC for PC dome of NPR Kaiga
570
Properties of HPC with recycled aggregates
571
Properties of HTPB based polyurethane membrane prepared by epoxidation method
572
Properties of human and rabbit cytosolic serine hydroxymethyltransferase are changed by single nucleotide polymorphic mutations
573
Properties of Human Follicular Dendritic Cells Purified with HJ2, a New Monoclonal Antibody
574
Properties of human skin mechanoreceptors in peripheral neuropathy
575
Properties of humidity sensing ZnO nanorods-base sensor fabricated by screen-printing
576
Properties of Hurwitz equivalence in the Braid group of order n
577
Properties of Hybrid Enzymes between Synechococcus Large Subunits and Higher Plant Small Subunits of Ribulose-1,5-bisphosphate Carboxylase/Oxygenase in Escherichia coli
578
Properties of hydraulic paste of basic oxygen furnace slag
579
Properties of hydrocarbon- and salt-contaminated flare pit soils in northeastern British Columbia (Canada)
580
Properties of hydrogen desorption from co-deposits on JT-60 graphite tile by pulsed-laser ablation
581
Properties of hydrogenated amorphous carbon films deposited by PECVD and modified by SF6 plasma
582
Properties of hydrogenated amorphous silicon thin film transistors fabricated at 150°C
583
Properties of hydrothermally processed multi-walled titania nanotubes
584
Properties of hydrothermally synthesized Zn2SnO4 nanoparticles using Na2CO3 as a novel mineralizer
585
Properties of hydroxyapatite produced by annealing of bovine bone
586
Properties of hydroxyapatite/zirconium oxide nanocomposites
587
Properties of hyperholomorphic functions and integrals for commutative-quaternionic valued functions
588
Properties of hyperons in chiral perturbation theory Original Research Article
589
Properties of hypersonic separated flows at moderate reynolds numbers
590
Properties of Immobilized Candida antarctica Lipase B on Highly Macroporous Copolymer
591
Properties of In2S3 thin films deposited onto ITO/glass substrates by chemical bath deposition Original Research Article
592
Properties of Inconel 625 mesh structures grown by electron beam additive manufacturing
593
Properties of index-guided PCF with air-core
594
Properties of individual Asian dust storm particles collected at Kosan, Korea during ACE-Asia
595
Properties of information matrices for linear models and universal optimality of experimental designs
596
Properties of InGaN/GaN quantum wells and blue light emitting diodes
597
Properties of In–Ga–Zn-O thin films for thin film transistor channel layer prepared by facing targets sputtering method
598
Properties of injectable ready-to-use calcium phosphate cement based on water-immiscible liquid
599
Properties of injection moulded blends of starch and modified biodegradable polyesters
600
Properties of in-situ nitride reinforced titanium-aluminide layers formed by reactive low pressure plasma spraying with nitrogen gas
601
Properties of in-situ nitride reinforced titanium-aluminide layers formed by reactive low pressure plasma spraying with nitrogen gas
602
Properties of interdigital electrode arrays with different geometries
603
Properties of interfaces in Cu/Ti1−xAlxN/〈Si〉 multilayers
604
Properties of interfacial adhesion for vibration controllability of composite materials as smart structures
605
Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation
606
Properties of intermediate band materials
607
Properties of intermetallic compounds suitable for hydrogen storage applications
608
Properties of intermetallic compounds suitable for hydrogen storage applications
609
Properties of intracellular magnetite crystals produced by Desulfovibrio magneticus strain RS-1
610
Properties of ion-assisted pulsed laser deposited H-BNrC-BN layer systems
611
Properties of ion-induced nucleation obtained from mobility measurements
612
Properties of ion-selective electrodes with polymer membranes for ibuprofen determination Original Research Article
613
Properties of iron alloys under the Earthʹs core conditions
614
Properties of iron boride films prepared by magnetron sputtering
615
Properties of iron oxides in streams draining the Loess Uplands of Mississippi
616
Properties of Ironstone Lateritic Gravels in Relation to Gravel Road Pavement Construction
617
Properties of Isometric Mappings
618
Properties of ITO films on glass fabricated by pulsed laser deposition
619
Properties of ITO on PET film in dependence on the coating conditions and thermal processing
620
Properties of ITO thin films deposited by RF magnetron sputtering at elevated substrate temperature
621
Properties of Jatropha seed oil from Northeastern Thailand and its transesterification catalyzed by potassium supported on NaY zeolite
622
Properties of journal impact in relation to bibliometric research group performance indicators
623
Properties of junctions of crystalline networks of complex TCNQ salts in polymer matrix with silicon
624
Properties of K0.5Bi0.5TiO3 thin films deposited on different substrates
625
Properties of kaolins in red Oxisols and red Ultisols in Thailand
626
Properties of Kefir made in Scotland and Poland using Bovine, Caprine and Ovine Milk with Different Starter Cultures
627
Properties of kernels and multiple positive solutions for three-point boundary value problems Original Research Article
628
Properties of k-Jacobsthal and k-Jacobsthal Lucas Sequences
629
Properties of KNTN [1 0 0] surfaces: A first-principles study
630
Properties of L Fuzzy Normal Sub λ- Groups
631
Properties of La and Nb-modified PZT thin films grown by radio frequency assisted pulsed laser deposition
632
Properties of La0.2Y0.8Ni5−xMnx alloys for high-pressure hydrogen compressor
633
Properties of La0.7Sr0.3MnO3 thin films grown on gallium nitrides
634
Properties of La1−ySryNi1−xFexO3 as a cathode material for a low-temperature operating SOFC
635
Properties of La2O3-Doped PNSZT Piezoelectric Ceramics Having Tetragonal and Rhombohedral Coexistent Phases
636
Properties of LaCo1−tCrtO3 III. Catalytic activity for CO oxidation Original Research Article
637
Properties of lactic acid based polymers and their correlation with composition
638
Properties of land mosaics: Implications for nature conservation in agricultural environments Original Research Article
639
Properties of Langmuir monolayers from semifluorinated alkanes
640
Properties of lanthanum doped BaTiO3 produced from nanopowders
641
Properties of large organic molecules on metal surfaces
642
Properties of large-scale flow structures in an isothermal ventilated room
643
Properties of large-scale methane/hydrogen jet fires
644
Properties of laser-cladded stellite coatings prepared on preheated chromium steel
645
Properties of Laterite Brick Reinfo rced with Oil Palm Empty Fruit Bunch Fibres
646
Properties of latex blends and its modified cement mortars
647
Properties of layered double hydroxide micro- and nanocomposites
648
Properties of LDL particles in NIDDM men: Relation to CAD
649
Properties of lead zirconate–alumina ‘nanocomposites’
650
Properties of lead-free conductive thick films of co-precipitated silver–palladium powders
651
Properties of lead-free solder alloys with rare earth element additions
652
Properties of lead–halide glasses in the PbBr2–PbCl2–PbF2–PbO–P2O5 system
653
Properties of least squares estimates in set membership identification,
654
Properties of Lévy flights on an interval with absorbing boundaries
655
Properties of Li[CrxLi(1−x)/3Mn2(1−x)/3]O2 (0.1≤x≤0.2) material prepared by quenching
656
Properties of LiCoPO4-non-graphitic carbon foam composites
657
Properties of light absorption in a highly coloured estuarine system in south-east Australia which is prone to blooms of the toxic dinoflagellate Gymnodinium catenatum
658
Properties of light emitting organic materials within the context of future electrically pumped lasers
659
Properties of light-induced degradation and the electronic properties of nanocrystalline silicon solar cells grown under functionally graded hydrogen dilutions
660
Properties of lightweight expanded polystyrene aggregate concretes containing fly ash
661
Properties of lightweight expanded polystyrene concrete reinforced with steel fiber
662
Properties of Lignin from Oil Palm Empty Fruit Bunch and Its Application for Plywood Adhesive
663
Properties of Likelihood Inference for Order Restricted Models
664
Properties of lime–metakolin mortars for the restoration of historic masonries
665
Properties of Limit Sets and Convergence of Continued Fractions
666
Properties of linear polymer chains in porous media
667
Properties of linear switching time-varying discrete-time systems with applications
668
Properties of link travel time functions under dynamic loads
669
Properties of Linum usitatissimum Seed Aqueous Extract Against Colon Cancer Cell Lines
670
Properties of lipid vesicles: FT-IR spectroscopy and fluorescence probe studies
671
Properties of lipid vesicles: FT-IR spectroscopy and fluorescence probe studies
672
Properties of lipophilic nucleoside monolayers at the air–water interface
673
Properties of liquid phase pressureless sintered silicon carbide obtained without sintering bed
674
Properties of liquid xenon scintillation for dark matter searches
675
Properties of Litopenaeus vannamei Dscam (LvDscam) isoforms related to specific pathogen recognition
676
Properties of local rank map vectors from multidetection chromatograms
677
Properties of locally convergent sequences with respect to median filter
678
Properties of locally linearly independent refinable function vectors Original Research Article
679
Properties of Love waves in layered piezoelectric structures
680
Properties of low density lipoproteins relevant to oxidative modifications change paradoxically during aging
681
Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys
682
Properties of low power spark ablation in aqueous solution for dissolution of precious metals and alloys
683
Properties of low-formaldehyde-emission particleboard made from recycled wood-waste chips sprayed with PMDI/PF resin
684
Properties of low-variability periods in financial time series
685
Properties of L-Serine Dehydratase in Alternaria chlamydospora
686
Properties of l-tyrosine based polyphosphates pertinent to potential biomaterial applications
687
Properties of LuAP:Ce scintillator containing intentional impurities
688
Properties of LuAP:Ce scintillator containing intentional impurities
689
Properties of lyocell spinning solution with the addition of carbon black/latex composite
690
Properties of macerated herbal oil
691
Properties of Magnetic and Velocity Fields in and around Solar Pores
692
Properties of magnetic impurities embedded into an anisotropic Heisenberg chain with spin gap Original Research Article
693
Properties of Magnetic Paper Prepared via in situ Synthesis Method
694
Properties of magnetic poly(glycidyl methacrylate) and poly(N-isopropylacrylamide) microspheres
695
Properties of magnetoferritin: a novel biomagnetic nanoparticle
696
Properties of magnetron sputtered Al–Si–N thin films with a low and high Si content
697
Properties of major classes of guinea pig bladder mechanoreceptors in vitro
698
Properties of male ejaculates do not generate geographical variation in female mating tactics in a butterfly Pieris napi
699
Properties of manifolds with skew-symmetric torsion and special holonomy
700
Properties of martian slope streak populations
701
Properties of matrices with numerical ranges in a sector
702
Properties of matter at forward rapidities at RHIC Original Research Article
703
Properties of Matter matter in assessment of scald injuries
704
Properties of measures of association within an extended FGM
705
Properties of mechanically alloyed Al75-x Ti25Crx
706
Properties of mechanically alloyed Al75-x Ti25Crx
707
Properties of mechanically alloyed Mg–Ni–Ti ternary hydrogen storage alloys for Ni-MH batteries
708
Properties of mechanically milled and spark plasma sintered Al–15 at.% MgB2 composite materials
709
Properties of mechanically milled and spark plasma sintered Al–AlB2 and Al–MgB2 nano-composite materials
710
Properties of Medium Density Fiberboard Made from Wet and Dry Stored Bagasse
711
Properties of medium density fiberboards made from renewable biomass
712
Properties of medium-density fibreboard (MDF) made from treated empty fruit bunch of oil palm
713
Properties of MEH-PPV films prepared by slow solvent evaporation
714
Properties of melt processed chitosan and aliphatic polyester blends
715
Properties of mesoporous carbons prepared from different carbon precursors using nanosize silica as a template
716
Properties of mesoporous carbons prepared from different carbon precursors using nanosize silica as a template
717
Properties of mesoporous tungstosilicic acid/titania composites prepared by sol–gel method
718
Properties of metakaolin geopolymer hardened paste prepared by high-pressure compaction
719
Properties of metal bolometers fabricated on porous silicon
720
Properties of metal doped tungsten oxide thin films for NOx gas sensors grown by PLD method combined with sputtering process
721
Properties of metal oxide clusters in non-traditional oxidation states
722
Properties of metal phosphates and phosphides in glass-ceramic waste forms
723
Properties of metallocene complexes during the oxidative crosslinking of air drying coatings Original Research Article
724
Properties of methacrylate–thiol–ene formulations as dental restorative materials
725
Properties of methyl radical trapped in amorphous SiO2 and in natural SiO2-clathrate Melanophlogite
726
Properties of Mg2Si (100) surfaces: A first-principles study
727
Properties of MgB/sub 2/ films grown by means of different vapor phase techniques
728
Properties of MgB2 superconductors with regard to space applications Original Research Article
729
Properties of Mg-based materials for hydrogen storage Original Research Article
730
Properties of MgxZn1−xO thin films sputtered in different gases
731
Properties of Mg-Y-Cu glasses with nanocrystalline particles
732
Properties of MHD turbulence and its consequences for the ISM and ICM
733
properties of M-hyoellipticity for pseudo differential operators
734
Properties of microdispersed sintered nanodiamonds as a stationary phase for normal-phase high performance liquid chromatography
735
Properties of microemulsions with mixed nonionic surfactants and citrus oil
736
Properties of microfine cement grouts at 4 °C, 10 °C and 20 °C
737
Properties of microsolvated ions: From the microenvironment of chromophore and alkali metal ions in proteins to negative ions in water clusters Original Research Article
738
Properties of micro-strip gas chambers (MSGC) and recent developments
739
Properties of milk protein concentrate stabilized oil-in-water emulsions Original Research Article
740
Properties of minimal mathematical expectations Original Research Article
741
Properties of mixed adsorption films of aniline–p-fluoroaniline at the water/air interface
742
Properties of mixed alkanethiol–dendrimer layers and their applications in biosensing
743
Properties of mixed backbone oligonucleotides containing 3′-O-methyl ribonucleosides
744
Properties of mixed Li2O and Na2O molybdenum phosphate glasses
745
Properties of mixed molybdenum oxide–iridium oxide thin films synthesized by spray pyrolysis
746
Properties of mixed monolayer and LB films of chiral amino acid porphyrin
747
Properties of mixed monolayers of clinical lung surfactant, serum albumin and hydrophilic polymers
748
Properties of mixed Na2O and K2O iron phosphate glasses
749
Properties of mixed phase n-doped silicon oxide layers and application in micromorph solar cells
750
Properties of MnZn ferrites prepared by powder injection molding technology
751
Properties of modified anhydride hardener and its cured resin Original Research Article
752
Properties of modified atmosphere heat pump dried foods Original Research Article
753
Properties of Modified Bitumen Obtained from Vacuum Bottom by Adding Recycled Waste Polymers and Natural Bitumen
754
Properties of Modified High Permeable Concrete with a Crumb Rubber
755
Properties of modified hydroxyl-terminated polybutadiene based polyurethane membrane
756
Properties of modulated and demodulated systems with implications to feedback limitations
757
Properties of moments of a family of GARCH processes
758
Properties of mortar prepared with recycled cathode ray tube funnel glass sand at different mineral admixture
759
Properties of Motility in Bacillus subtilis Powered by the H+-coupled MotAB Flagellar Stator, Na+-coupled MotPS or Hybrid Stators MotAS or MotPB
760
Properties of Moyal–Lax representation
761
Properties of multi-layer composite membranes on the base of polyethylene porous films Original Research Article
762
Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing
763
Properties of multilayered thin films for thermal ink-jet printing devices
764
Properties of multi-mode resource-constrained project scheduling problems with resource vacations and activity splitting
765
Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash
766
PROPERTIES OF MULTIVALENT FUNCTIONS ASSOCIATED WITH A CERTAIN INTEGRAL OPERATOR
767
Properties of multivariable fuzzy controller under Gödelʹs implication
768
Properties of Multivariate Homogeneous Orthogonal Polynomials Original Research Article
769
Properties of musculus gluteus maximus in above-knee amputees
770
Properties of N=1 SUSY Yang-Mills vacuum and domain walls
771
Properties of N=84, even-even nuclei populated in the spontaneous fission of 248Cm
772
Properties of N2- and CO2-foams as a function of pressure
773
Properties of Na2O–Al2O3–B2O3 glasses
774
Properties of Na2O–Al2O3–B2O3 glasses
775
Properties of Nafion 117 in highly acidic environment of Bunsen reaction of I–S cycle
776
Properties of Nafion membranes under PEM water electrolysis conditions
777
Properties of Nafion® NR-211 membranes for PEMFCs
778
Properties of NaNbO3 powders and ceramics prepared by hydrothermal reaction
779
Properties of nanocomposites based on sulfonated poly(styrene-b-ethylenebutylene-b-styrene) and multiwalled carbon nanotubes
780
Properties of nanocrystalline Al–Cu–O films reactively sputtered by DC pulse dual magnetron
781
Properties of nanocrystalline and nanocomposite WxZr1−x thin films deposited by co-sputtering
782
Properties of nanocrystalline ferroelectric PZT ceramics
783
Properties of nanocrystalline SnO2 obtained by means of a microwave process
784
Properties of nanofibre reinforced cement composites
785
Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential
786
Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential
787
Properties of nanometric and micrometric multilayered films made of three conducting polymers
788
Properties of nanometric and submicrometric multilayered films of poly(3,4-ethylenedioxythiophene) and poly(N-methylpyrrole)
789
Properties of nano-multilayered hard coatings deposited by a new hybrid coating process: Combined cathodic arc and unbalanced magnetron sputtering
790
Properties of nanopatterned pins generated in a superconductor with FIB
791
Properties of nanoscale metal hydrides
792
Properties of nano-scale soliton-like excitations in two-dimensional lattice layers
793
Properties of nanostructured magnesium metatitanate prepared by the sol-gel technique
794
Properties of nano-ZnO/poly(vinyl alcohol)/poly(ethylene oxide) composite thin films
795
Properties of nano-ZnO/poly(vinyl alcohol)/poly(ethylene oxide) composite thin films
796
Properties of narrow coronal massejections observed with LASCO Original Research Article
797
Properties of narrow gap quantum dots and wells in the InAs/InSb/GaSb systems
798
Properties of natural cellulose fibers from hop stems
799
Properties of natural cellulose fibers from hop stems
800
Properties of Natural Double-Strand-Break Sites at a Recombination Hotspot in Saccharomyces cerevisiae
801
Properties of natural organisms and its use in technological architecture
802
Properties of Nb doped Zr-rich PZT ceramics prepared by a heterogenous precipitation method
803
Properties of Nb-doped SrCo0.8Fe0.2O3−d perovskites in oxidizing and reducing environments
804
Properties of NdFeB film grown on silicon substrate by PLD under external magnetic field
805
Properties of N-doped ZnO thin films in annealing process
806
Properties of near-zero modes and chiral symmetry breaking Original Research Article
807
Properties of new cork–polymer composites: Advantages and drawbacks as compared with commercially available fibreboard materials
808
Properties of new low melting point quaternary ammonium salts with bis(trifluoromethanesulfonyl)imide anion
809
Properties of new refrigerants and predictions for condensation heat transfer enhancement with low-finned tubes
810
Properties of Ni/Y2O3 and its catalytic performance in methane conversion to syngas
811
Properties of Ni/YSZ cermet as anode for SOFC
812
Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application
813
Properties of Ni-aluminides-reinforced Ni-matrix laminates synthesized by pulsed-current hot pressing (PCHP)
814
Properties of nicked and circular dumbbell RNA/DNA chimeric oligonucleotides containing antisense phosphodiester oligodeoxynucleotides Original Research Article
815
Properties of NiCrBSi coating, as sprayed and remelted by different technologies
816
Properties of NiO cathode coated with lithiated Co and Ni solid solution oxide for MCFCs
817
Properties of NiO sputtered thin films and modeling of their sensing mechanism under formaldehyde atmospheres Original Research Article
818
Properties of NiO thin films deposited by chemical spray pyrolysis using different precursor solutions
819
Properties of NiO thin films deposited by intermittent spray pyrolysis process
820
Properties of nitrate reductase from seedling leaves of selected barley genotypes
821
Properties of nitrate, sulfate and ammonium in typical polluted atmospheric aerosols (PM10) in Beijing
822
Properties of nitrided layers formed during plasma nitriding of commercially pure Ti and Ti–6Al–4V alloy
823
Properties of nitrogen-doped diamond-like-carbon films prepared by a laser ablation
824
Properties of noble gases and binary mixtures for closed Brayton Cycle applications
825
Properties of nonadiabatic couplings and the generalized Born–Oppenheimer approximation Original Research Article
826
Properties of nonlinear transformations of fractionally integrated processes
827
Properties of nonlocal charges in the supersymmetric two boson hierarchy
828
Properties of non-simultaneous blow-up solutions in nonlocal parabolic equations Original Research Article
829
Properties of nonstoichiometric Pr0.6−xSr0.4MnO3 as the cathodes of SOFCs
830
Properties of novel azodyes containing powerful acceptor groups and thiophene moiety
831
Properties of novel epoxy/clay nanocomposites prepared with a reactive phosphorus-containing organoclay
832
Properties of novel fluorinated compounds and their mixtures as alternative refrigerants
833
Properties of novel Li4−3xCrxSiO4 ceramic electrolyte
834
Properties of novel oligonucleotide analogues containing an acyclic nucleoside and a carbamate linkage
835
Properties of novel polyvinyl alcohol/cellulose nanocrystals/silver nanoparticles blend membranes
836
Properties of novel spherical carbon adsorbents synthesized from phosphorylated polymeric precursors
837
Properties of novel spherical carbon adsorbents synthesized from phosphorylated polymeric precursors
838
Properties of novel yellow anthraquinone dichroic dyes with naphthylthio groups for guest–host liquid crystal displays
839
Properties of n-type hydrogenated nanocrystalline cubic silicon carbide films deposited by VHF-PECVD at a low substrate temperature
840
Properties of n-type polycrystalline silicon solar cells formed by aluminium induced crystallization and CVD thickening
841
Properties of nuclear and neutron matter in a nonlinear σ–ω–ρ mean-field approximation with self- and mixed-interactions Original Research Article
842
Properties of nuclei near the neutron-drip line in O – Si region Original Research Article
843
Properties of nylon 12 balloons after thermal and liquid carbon dioxide treatments
844
Properties of oblique dual frames in shift-invariant systems
845
Properties of oceanic lithosphere: Revised plate cooling model predictions
846
Properties of oil and char derived from slow pyrolysis of Tetraselmis chui
847
Properties of oil-in-water emulsions stabilized by β-lactoglobulin in simulated gastric fluid as influenced by ionic strength and presence of mucin
848
Properties of oligopyrrole doped dodecylbenzene–sulfonic acid prepared with different oxidants in reversed microemulsion
849
Properties of olive oil
850
Properties of Omani artificial pozzolana (sarooj)
851
Properties of one-dimensional anharmonic lattice solitons
852
Properties of one-sided Lipschitz multivalued maps Original Research Article
853
Properties of optical and electrical signals of self-quenching streamer mode in coexistence region
854
Properties of optical and electrical signals of self-quenching streamer mode in coexistence region
855
Properties of optical phonons in Zn1−x−yMgyBexSe quaternary mixed crystal
856
Properties of optical transition radiation and Vavilov–Cherenkov radiation for charged particle inclined flight through a plate of metal
857
Properties of optical transition radiation and Vavilov–Cherenkov radiation for charged particle inclined flight through a plate of metal
858
Properties of optimal forecasts under asymmetric loss and nonlinearity
859
Properties of optimal polynomial designs under smoothing spline models
860
Properties of optimal schedules in preemptive shop scheduling Original Research Article
861
Properties of optimal survivable paths in a graph
862
Properties of organic and acid sulfate soils and water of a ‘reclaimed’ tidal backswamp in Central Kalimantan, Indonesia
863
Properties of organic coatings depending on chemical composition and structure of pigment particles
864
Properties of organic matter in PM2.5 at Changdao Island, China—A rural site in the transport path of the Asian continental outflow
865
Properties of organic matter in soil solution in a German fen area as dependent on land use and depth
866
Properties of organic matter precipitated from acidic forest soil solutions
867
Properties of organosoluble aromatic polyimides from 3′-trifluoromethyl-3,4′-oxydianiline
868
Properties of oriented and graded PZT thin films
869
Properties of osteoconductive biomaterials: Calcium phosphate cement with different ratios of platelet-rich plasma as identifiers
870
Properties of oxide thin films and their adsorption behavior studied by scanning tunneling microscopy and conductance spectroscopy
871
Properties of oxidized phospholipid monolayers: An atomistic molecular dynamics study
872
Properties of oxygen permeation and partial oxidation of methane in La0.6Sr0.4CoO3−δ (LSC)–La0.7Sr0.3Ga0.6Fe0.4O3−δ (LSGF) membrane
873
Properties of oxygen sites at the MoO3(0 1 0) surface: density functional theory cluster studies and photoemission experiments
874
Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio
875
Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio Original Research Article
876
Properties of paints with hematite coated muscovite and talc particles
877
Properties of palladium doped tin oxide thin films for gas sensors grown by PLD method combined with sputtering process
878
Properties of paper coated with kaolin: The influence of the rheological modifier
879
Properties of Paper Manufactured from Kenaf as Function of Alkaline pH Medium and Retention of Precipitated Calcium Carbonate
880
Properties of parallelotopes equivalent to Voronoi’s conjecture
881
Properties of partially purified leaf ornithine aminotransferase of Brassica juncea under salt stress
882
PROPERTIES OF PARTICLEBOARD MADE FROM CHILI PEPPER STALKS
883
Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometry
884
Properties of Particleboard Made from UF with Low-formaldehyde (E1)
885
Properties of particleboard produced with liquefaction-modified phenol-formaldehyde adhesive
886
Properties of particleboard produced with liquefaction-modified phenol-formaldehyde adhesive
887
Properties of partition wall blocks prepared with fresh concrete wastes
888
Properties of partition wall blocks prepared with high percentages of recycled clay brick after exposure to elevated temperatures
889
Properties of passive film formed on CP titanium, Ti–6Al–4V and Ti–13.4Al–29Nb alloys in simulated human body conditions
890
Properties of Pb(Zr, Ti)O3 fibres with a radial gradient structure Original Research Article
891
Properties of PbS nanocrystals embedded in zirconia sol–gel film
892
Properties of PbS thin films grown on glass and layered GaSe crystal substrates by chemical bath deposition
893
Properties of Peanut Protein Film: Sorption Isotherm and Plasticizer Effect
894
Properties of PECVD-deposited thermal barrier coatings
895
Properties of pediatric patients with bilateral amblyopia
896
Properties of PEDOT:PEG/ZnO/p-Si heterojunction diode
897
Properties of PEMs based on cross-linked sulfonated poly(ether ether ketone)
898
Properties of Perfluorobenzene near the Critical Point
899
Properties of peripheral blood and cord blood stem cells
900
Properties of pervious geopolymer concrete using recycled aggregates
901
Properties of phase separation method synthesized superhydrophobic polystyrene films
902
PROPERTIES OF PHASE SHIFT DEFECTS IN ONE-DIMENSIONAL RUGATE PHOTONIC STRUCTURES
903
Properties of Phenoloxidases Generated from Prophenoloxidase with 2-Propanol and the Natural Activator in Drosophila melanogaster
904
Properties of Phonological Markers That Affect the Acquisition of Gender-Like Subclasses,,
905
Properties of phosphatidylcholine in the presence of its monofluorinated analogue Original Research Article
906
Properties of phosphorus retention in sediments under different hydrological regimes: A laboratory-scale simulation study
907
Properties of phosphorus-related defects induced by γ-rays and pulsed X-ray irradiation in germanosilicate optical fibers
908
Properties of photocatalysts with tunnel structures: formation of a surface lattice O− radical by the UV irradiation of BaTi4O9 with a pentagonal-prism tunnel structure
909
Properties of photoconductive In Se thin films, crystallized by 2 3 post-deposition heat treatment in nitrogen atmosphere
910
Properties of phthalonitrile monomer blends and thermosetting phthalonitrile copolymers
911
Properties of phylogenetic trees generated by Yule-type speciation models
912
Properties of physisorbed water layers on gold revealed in a FEM study
913
Properties of piezoelectric actuator on silicon membrane, prepared by screen printing method
914
Properties of piezoelectric ceramic with textured structure for energy harvesting
915
Properties of pistachio-nut-shell activated carbons subjected to vacuum pyrolysis conditions
916
Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer
917
Properties of plain concrete made with mixed recycled coarse aggregate
918
Properties of plain weave metallic wire mesh screens
919
Properties of plasma sprayed boron carbide protective coatings for the first wall in fusion experiments
920
Properties of plasma sprayed La2Zr2O7 coating fabricated from powder synthesized by a single-step solution combustion method
921
Properties of plasma sprayed yttria stabilized zirconia thermal barrier coating prepared from co-precipitation synthesized powder
922
Properties of plasma-spray coated hydroxyapatite on carbon/carbon composites pretreated by an argon plasma
923
Properties of plastic scintillators after irradiation
924
Properties of plastic scintillators after irradiation
925
Properties of plutonium and its alloys for use as fast reactor fuels
926
Properties of plywood manufactured from compressed veneer as building material
927
Properties of PMMA artificially aged
928
Properties of PMN–PT fibres fabricated using powder of PMN–PT single crystals
929
Properties of poly (N,N-dimethylaminoethyl methacrylate)/polysulfone positively charged composite nanofiltration membrane
930
Properties of poly(2-hydroxyethyl acrylate)-silica nanocomposites obtained by the sol–gel process
931
Properties of Poly(ADP-ribose) Glycohydrolase Purified from Pig Testis Nuclei
932
Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites
933
Properties of poly(vinyl alcohol) fiber reinforced high-performance organic aggregate cementitious material: Converting brittle to plastic
934
Properties of poly(vinyl butyral)/TiO2 nanocomposites formed by sol–gel process
935
Properties of poly-aminophenylboronate coatings in capillary electrophoresis for the selective separation of diastereoisomers and glycoproteins
936
Properties of Polyaniline Synthesized in Ionic Liquid (l-Ethyl-3-methylimidazolium-ethyl sulphate).
937
Properties of polyaniline/ordered mesoporous carbon composites as electrodes for supercapacitors
938
Properties of polyaniline/ordered mesoporous carbon composites as electrodes for supercapacitors
939
Properties of Polyanilines Containing Oxyethylene Units
940
Properties of polycrystalline silicon films obtained by rapid thermal processing for micromechanical sensors
941
Properties of polycrystalline SrRuO3 thin films on Si substrates
942
Properties of polyelectrolyte complex membranes based on some weak polyelectrolytes
943
Properties of polyelectrolyte–surfactant complexes obtained by polymerization of an ionic monomer in a solution of an oppositely charged surfactant
944
Properties of polyethersulfone ultrafiltration membranes modified by polyelectrolytes Original Research Article
945
Properties of polyethylene-layered silicate nanocomposites prepared by melt intercalation with a PP-g-MA compatibilizer
946
Properties of polyketone/polypropylene blends
947
Properties of polylactic acid composites reinforced with oil palm biomass microcrystalline cellulose
948
Properties of polymer chains in confinement. Monte Carlo simulations
949
Properties of Polymer Concrete Using Fly Ash
950
Properties of polymer conducting thin layers on the surface of microporous polyethylene films
951
Properties of Polymer Modified Bitumen after Rubber-Bitumen Interaction
952
Properties of polymer modified steel fiber-reinforced cement concretes
953
Properties of polymer sandwich brushes
954
Properties of polymer/clay interphase in nanoparticles synthesized through in-situ polymerization processes
955
Properties of polymer-modified cement mortar using pre-enveloping method
956
Properties of polymer-modified mortars using epoxy and acrylic emulsions
957
Properties of polymer–nanoparticle composites
958
Properties of polymers adsorbed on solid surfaces
959
Properties of polyphenol oxidase from Anamur banana (Musa cavendishii)
960
Properties of polypropylene composites filled with a mixture of household waste of mate-tea and wood particles
961
Properties of polypropylene fiber reinforced silica fume expansive-cement concrete
962
Properties of polypropylene/polyamide nanocomposites prepared by melt processing with a PP-g-MAH compatibilizer
963
Properties of polypyrrole prepared by chemical polymerization using aqueous solution containing Fe2(SO4)3 and anionic surfactant
964
Properties of polystyrene/poly(dimethyl siloxane) blends partially compatibilized with star polymers containing a γ-cyclodextrin core and polystyrene arms
965
Properties of polyurethane elastomers and composites by thermal analysis
966
Properties of polyurethane–polystyrene graft copolymer membranes used for separating water–ethanol mixtures
967
Properties of polyvinyl alcohol/xylan composite films with citric acid
968
Properties of poly-β-aminoanthraquinone modified carbon fiber electrode as a basis for hemoglobin biosensors
969
Properties of pore structure of thin-layer external plasters under ageing in simulated environment
970
Properties of porous carbons prepared from the wood of Japanese Cypress — Effect of carbonization time at 900 °C
971
Properties of porous concrete from waste crushed concrete (recycled aggregate)
972
Properties of porous glasses with embedded ferroelectric materials
973
Properties of porous magnesium prepared by powder metallurgy
974
Properties of porous silica glasses prepared via sol–gel process
975
Properties of Portland cement mortars incorporating high amounts of oil-fuel ashes
976
Properties of Portland cement-modified asphalt binder using Superpave tests
977
Properties of positive definite solutions of the equation X + A*X−2A = I Original Research Article
978
Properties of positive harmonic functions on the half-space with a nonlinear boundary condition
979
Properties of positive solutions to a class of four-point boundary value problem of Caputo fractional differential equations with a parameter
980
Properties of positive solutions to an elliptic equation with negative exponent
981
Properties of potential probiotic Lactobacillus plantarum strains Original Research Article
982
Properties of prefabricated building materials produced from ground pumice aggregate and binders
983
Properties of pregelatinized rice flour made by hot air or gum puffing
984
Properties of premixed hydrogen/propane/air flame in ceramic granular beds
985
Properties of Prior and Posterior Distributions for Multivariate Categorical Response Data Models
986
Properties of products for flatness in the category of S-posets
987
Properties of projectile-fragments in the 40Ar + 27Al reaction at 44 A MeV. Comparison with a multisequential decay model Original Research Article
988
Properties of proportional mean residual life model
989
Properties of protease extracted from tea-field soil
990
Properties of protease-treated maize starches
991
Properties of protection goals and their integration into a user interface
992
Properties of protein adsorption onto pore surface during microfiltration: Effects of solution environment and membrane hydrophobicity
993
Properties of protein powder prepared from Cape hake by-products Original Research Article
994
Properties of proteins in cancer procoagulant preparations that are detected by anti-tissue factor antibodies
995
Properties of proteolytic enzyme from ginger (Zingiber officinale Roscoe)
996
Properties of Pt Schottky type contacts on high-resistivity CdZnTe detectors
997
Properties of Pt Schottky type contacts on high-resistivity CdZnTe detectors
998
Properties of Pt/C and Pd/C catalysts prepared by reduction with hydrogen of adsorbed metal chlorides: Influence of pore structure of the support Original Research Article
999
Properties of Pt/C catalysts prepared by adsorption of anionic precursor and reduction with hydrogen. Influence of acidity of solution Original Research Article
1000
Properties of Pt-based electrocatalysts containing selectively deposited Sn as the anode for polymer electrolyte membrane fuel cells
