ليست عنوان مقالات لاتين Creep and creep fracture of commercial aluminium alloys Crinoid biofacies in Upper Carboniferous cyclothems, midcontinent North America: faunal tracking and the role of regional processes in biofacies recurrence

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Creep and creep fracture of commercial aluminium alloys

2

Creep and creep fracture of polycrystalline copper

3

Creep and creep modelling of a multimodal nickel-base superalloy Original Research Article

4

Creep and creep recovery properties of polystyrene aggregate concrete

5

Creep and creep-fatigue cracking behaviour of two structural steels Original Research Article

6

Creep and damage accumulation in orthotropic composites under cyclic loading

7

Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate

8

Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads

9

Creep and failure prediction of Diestian ferruginous sandstone: Modelling and repair options

10

Creep and fatigue behavior of SiC fiber reinforced SiC composite at high temperatures

11

Creep and fatigue behavior of SiC fiber reinforced SiC composite at high temperatures

12

Creep and fatigue interaction in the PWA1484 single crystal nickel-base alloy

13

Creep and fatigue lifetime analysis of directionally solidified superalloy and its brazed joints based on continuum damage mechanics at elevated temperature

14

Creep and fatigue properties of high temperature silicides and their composites

15

Creep and fatigue properties of high temperature silicides and their composites

16

Creep and fracture in concrete: a fractional order rate approach

17

Creep and impact properties of wood fibre–polypropylene composites: influence of temperature and moisture content

18

Creep and long-term strength of herringbone lock joints of gas-turbine engines under the combined action of static and cyclic loads

19

Creep and Long-Term Strength of Press-Powder Composites

20

Creep and microstructure of near-gamma TiAl alloys

21

Creep and microstructure of Nextel™ 720 fiber at elevated temperature in air and in steam Original Research Article

22

Creep and physical aging behaviour of PA6 nanocomposites

23

Creep and precipitation behaviors of AL6XN austenitic steel at elevated temperatures

24

Creep and rate of loading effects on geogrid- reinforced sand

25

Creep and recovery behavior characterization of asphalt mixture in compression

26

Creep and recovery behaviors of a polythiophene-based electrorheological fluid

27

Creep and Recovery Characteristics of Chicken Meat Frankfurters

28

Creep and recovery experimental investigation of low oil content food emulsions

29

Creep and recovery of polypropylene/carbon nanotube composites

30

Creep and recovery of polystyrene composites filled with graphene additives

31

Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress

32

Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress

33

Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress

34

Creep and shrinkage analysis of curved composite beams with partial interaction

35

Creep and shrinkage analysis of curved composite beams with partial interaction

36

Creep and shrinkage behaviour of CFRP-reinforced mortar

37

Creep and shrinkage effect on adhesive stresses in RC beams strengthened with composite laminates

38

Creep and shrinkage effect on the dynamic analysis of reinforced concrete slab-and-beam structures

39

Creep and shrinkage of concrete: physical origins and practical measurements

40

Creep and shrinkage of concrete: physical origins and practical measurements Original Research Article

41

Creep and shrinkage of recycled aggregate concrete

42

Creep and sintering resistance of a Ce added anode electrode for molten carbonate fuel cell

43

Creep and strain-dependent microstructures of synthetic anorthite–diopside aggregates

44

Creep and strength of ZrP2O7 bonded Si3N4 porous ceramics at 800–1000 °C

45

Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach

46

Creep and Stress Relaxation Behavior of Polypropylene, Metallocene-Prepared Polyethylene and their Blends

47

Creep and stress relaxation in free-standing thin metal films controlled by coupled surface and grain boundary diffusion Original Research Article

48

Creep and stress-rupture behavior of Y2O3–Nd2O3-doped silicon nitrides with different additive contents

49

Creep and substructure in 5 vol.% SiC–2124 Al composite

50

Creep and substructure in 5 vol.% SiC–2124 Al composite

51

Creep and superplasticity in a spray-cast aluminum alloy processed by ECA pressing

52

Creep and superplasticity in nanocrystalline materials: current understanding and future prospects

53

Creep and superplasticity in nanocrystalline materials: current understanding and future prospects

54

Creep and tensile behaviors of Fe–Cr–Al foils and laser microwelds at high temperature

55

Creep and tensile behaviour of austenitic Fe–Cr–Ni stainless steels

56

Creep and the anomalous yield stress of Ni3Ga

57

Creep and the anomalous yield stress of Ni3Ga

58

Creep and the in vivo assessment of human patellar tendon mechanical properties

59

Creep and thermomechanical fatigue properties of in situ Cu6Sn5 reinforced lead-free composite solder

60

Creep and Viscoelastic Behaviour of Human Dentin

61

Creep and visco-elastic behaviour of LPS-SiC sintered with Lu2O3–AlN additive

62

Creep and wear behaviour of ethylene–butene copolymers reinforced by ultra-high molecular weight polyethylene fibres

63

Creep as an extension of hot working: A unified approach to high temperature deformation of AZ31 alloy

64

Creep associated changes in intervertebral disc bulging obtained with a laser scanning device

65

Creep at low temperatures: unzipping of dislocations, inertia, and criticality processes

66

Creep behavior and deformation mechanisms in a nanocluster strengthened ferritic steel Original Research Article

67

Creep behavior and deformation microstructures of Mg–Y alloys at 550 K

68

Creep behavior and deformation microstructures of Mg–Y alloys at 550 K

69

Creep behavior and its correlation with defect chemistry of La0.58Sr0.4Co0.2Fe0.8O3−δ Original Research Article

70

Creep behavior and manufacturing parameters of wood flour filled polypropylene composites

71

Creep behavior and microstructural damage of martensitic P92 steel weldment

72

Creep behavior and microstructural evolution of deformed Al–Cu–Mg–Ag heat resistant alloy

73

Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys

74

Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys

75

Creep behavior and microstructure evolution at 750 °C in a new precipitation-strengthened heat-resistant austenitic stainless steel

76

Creep behavior and related structural defects in Al2O3–Ln2O3 (ZrO2) directionally solidified eutectics (Ln = Gd, Er, Y)

77

Creep behavior and stability of MX precipitates at high temperature in 9Cr–0.5Mo–1.8W–VNb steel

78

Creep behavior and stability of MX precipitates at high temperature in 9Cr–0.5Mo–1.8W–VNb steel

79

Creep behavior and surface characterization of a laser surface nitrided Ti–6Al–4V alloy

80

Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy

81

Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy

82

Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy

83

Creep behavior during the eutectoid transformation of albite: Implications for the slab deformation in the lower mantle

84

Creep behavior in an extruded β solid solution Nb–Ti base alloy

85

Creep behavior in an extruded β solid solution Nb–Ti base alloy

86

Creep behavior in interlaminar shear of a Hi-Nicalon™/SiC–B4C composite at 1200 °C in air and in steam

87

Creep behavior in interlaminar shear of Nextel™720/alumina ceramic composite at elevated temperature in air and in steam

88

Creep behavior in near-nanostructured Al 5083 alloy

89

Creep behavior modeling of silica fume containing Al2O3–MgO refractory castables

90

Creep behavior of 2.25Cr1Mo steel—Effects of thermal ageing and pre-strain

91

Creep behavior of 316 austenitic stainless steel under variant operating conditions

92

Creep behavior of a 4.5%-Re single crystal nickel-based superalloy at intermediate temperatures

93

Creep behavior of a carbon-derived Si3N4/SiC nanocomposite

94

Creep behavior of a cast 359/SiC/10p aluminum composite

95

Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part I: experimental development and creep-rupture

96

Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part I: experimental development and creep-rupture

97

Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part I: experimental development and creep-rupture

98

Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part II: Creep-deformation and model development

99

Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part II: Creep-deformation and model development

100

Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part II: Creep-deformation and model development

101

Creep behavior of a dispersion-strengthened Cu–Ti–Al alloy obtained by reaction milling

102

Creep behavior of a poled PZT wafer under longitudinal tensile stress and through thickness electric field

103

Creep behavior of a single crystal nickel-based superalloy containing 4.2% Re

104

Creep behavior of a zirconium diboride–silicon carbide composite

105

Creep behavior of adhesives used for external FRP strengthening of RC structures

106

Creep behavior of AE42 based hybrid composites

107

Creep behavior of Al-rich FeAl intermetallics

108

Creep behavior of Al-rich FeAl intermetallics

109

Creep behavior of an A286 type stainless steel

110

Creep behavior of an Al-6061 metal matrix composite produced by liquid metallurgy processing

111

Creep behavior of an Al-6061 metal matrix composite produced by liquid metallurgy processing

112

Creep behavior of an oxide dispersion strengthened Ni3Al ordered intermetallic material

113

Creep behavior of an oxide dispersion strengthened Ni3Al ordered intermetallic material

114

Creep behavior of an oxide-dispersion-strengthened Ni3Al-based alloy

115

Creep behavior of an oxide-dispersion-strengthened Ni3Al-based alloy

116

Creep behavior of AS41 alloy matrix nano-composites

117

Creep behavior of austenitic stainless steel weld metals as a function of ferrite content

118

Creep behavior of AZ31 magnesium alloy in low temperature range between 423 K and 473 K

119

Creep behavior of bagasse fiber reinforced polymer composites

120

Creep behavior of Biodegradable Triple-component Nanocomposites Based on PLA/PCL/bioactive Glass for ACL Interference Screws

121

Creep behavior of bisphenol E cyanate ester/alumina nanocomposites

122

Creep behavior of Bure clayey rock

123

Creep behavior of carbon fiber/epoxy matrix composites

124

Creep behavior of carbon-fiber-reinforced polyetheretherketone (PEEK) [ ±45]4s laminated composites (I)

125

Creep behavior of ceramics studied by mechanical loss measurements

126

Creep behavior of ceramics studied by mechanical loss measurements

127

Creep behavior of ceramics studied by mechanical loss measurements

128

Creep behavior of commercial FeCrAl foils: Beneficial and detrimental effects of oxidation

129

Creep Behavior of Cylinders Subjected to an Internal Pressure and a Two Dimensional Temperature Field Using First Order Shear Deformation Theory

130

Creep Behavior of Double Tempered 8%Cr-2%WVTa Martensitic Steel

131

Creep behavior of extruded Al–6Mg–1Sc–1Zr–10 vol.% SiCp composite

132

Creep Behavior of Extruded Sheets of Magnesium Alloys Containing La-Rich Mischmetal

133

Creep behavior of Fe–C alloys at high temperatures and high strain rates

134

Creep behavior of Fe–C alloys at high temperatures and high strain rates

135

Creep behavior of high-strength low-alloy steel at elevated temperatures

136

Creep behavior of hot extruded Al-Al2O3 nanocomposite powder

137

Creep behavior of in situ TiCP/2618 aluminum matrix composite

138

Creep behavior of INCOLOY alloy 617

139

Creep behavior of in-situ Al2O3 and TiB2 particulates mixture-reinforced aluminum composites

140

Creep behavior of in-situ Al2O3 and TiB2 particulates mixture-reinforced aluminum composites

141

Creep behavior of intermetallic FeAl and FeAlCr alloys

142

Creep behavior of intermetallic FeAl and FeAlCr alloys

143

Creep behavior of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) at 573 K

144

Creep behavior of Mg–2 wt.%Nd binary alloy

145

Creep behavior of Mg–2Nd–0.5Zn–0.4Zr at ambient temperature

146

Creep behavior of Mg–9Gd–1Y–0.5Zr (wt.%) alloy piston by squeeze casting

147

Creep Behavior of Mullite Short Fiber Reinforced ZL109 Alloy Composites at High Temperature

148

Creep behavior of nanocrystalline monoclinic ZrO2

149

Creep behavior of nanocrystalline nickel at 290 and 373 K

150

Creep behavior of nanocrystalline nickel at 290 and 373 K

151

Creep behavior of nanostructured Mg alloy at ambient and low temperature

152

Creep behavior of near-peritectic Sn–5Sb solders containing small amount of Ag and Cu

153

Creep behavior of new kinds of Ni–Co-base superalloys

154

Creep behavior of NextelTM610/Monazite/Alumina composite at elevated temperatures

155

Creep behavior of Nextel™720/alumina ceramic composite with ±45° fiber orientation at 1200 °C

156

Creep behavior of Nextel™720/alumina–mullite ceramic composite with ±45° fiber orientation at 1200 °C

157

Creep behavior of Ni-12 wt.% Al anodes for molten carbonate fuel cells

158

Creep behavior of niobium-modified zirconium alloys

159

Creep behavior of ODS materials: A study of dislocations/precipitates interactions

160

Creep behavior of oxide dispersion strengthened 8Cr–2WVTa and 8Cr–1W steels

161

Creep behavior of pack cementation aluminide coatings on Grade 91 ferritic–martensitic alloy

162

Creep behavior of poly(methyl methacrylate) with growing damage

163

Creep behavior of pultruded GFRP elements – Part 1: Literature review and experimental study Review Article

164

Creep behavior of pultruded GFRP elements – Part 2: Analytical study

165

Creep behavior of pure magnesium and Mg–Al alloys in active environments

166

Creep behavior of pure magnesium and Mg–Al alloys in active environments

167

Creep behavior of reduced activation ferritic/martensitic steels irradiated at 573 and 773 K up to 5 dpa

168

Creep behavior of reduced activation martensitic steel F82H injected with a large amount of helium

169

Creep behavior of SiC whisker-reinforced Si3N4/BN fibrous monolithic ceramics

170

Creep behavior of single crystal superalloy specimen under temperature gradient condition

171

Creep behavior of spray-cast 7XXX aluminum alloy

172

Creep behavior of spray-deposited AlLi/SiCp composite

173

Creep behavior of the F82H steel under irradiation with 17 MeV protons at 300 °C

174

Creep behavior of the intact and meniscectomy knee joints

175

Creep behavior of Ti–40Al–10Nb titanium aluminide intermetallic alloy

176

Creep Behavior of Ti--40Al--16Nb Intermetallic Alloy and Strengthening Effects of Minor Sc

177

Creep behavior of Ti–6Al–2Sn–4Zr–2Mo: I. The effect of nickel on creep deformation and microstructure Original Research Article

178

Creep behavior of Ti–6Al–4V and a comparison with titanium matrix composites

179

Creep behavior of TiCxN1−x–CoTi cermets synthesized by mechanically induced self-sustaining reaction

180

Creep behavior of two Cu-2 vol% TiC alloys obtained by reaction milling and extrusion

181

Creep behavior of ultra-fine grained Zn–4.5Al

182

Creep behavior of unidirectional and angle-ply T800H/3631 laminates at high temperature and simulations using a phenomenological viscoplasticity model

183

Creep Behavior of Zr-1.5Nb-0.4Sn-0.1Fe-0.1Cu Alloy

184

Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures

185

Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures

186

Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates

187

Creep behaviors and effect factors of single crystal nickel-base superalloys

188

Creep behaviors and role of dislocation network in a powder metallurgy Ni-based superalloy during medium-temperature

189

Creep behaviors and stress regions of hybrid reinforced high temperature titanium matrix composite

190

Creep Behaviors of FGH95 Powder Ni-Base Superalloy

191

Creep behaviors of highly pure aluminum at lower temperatures

192

Creep behaviors of highly pure aluminum at lower temperatures

193

Creep behaviors of Mg–5Li–3Al–(0,1)Ca alloys

194

Creep behaviour and creep microstructures of a high-temperature titanium alloy Ti–5.8Al–4.0Sn–3.5Zr–0.7Nb–0.35Si–0.06C (Timetal 834): Part I. Primary and steady-state creep

195

Creep behaviour and failure modelling of modified 9Cr1Mo steel

196

Creep behaviour and microstructural evolution in AISI 316LN + Nb steels at 650 °C

197

Creep behaviour and related high temperature microstructural stability of Ti–46Al–9Nb sheet material

198

Creep behaviour at elevated temperatures of an Al-Cu-Mg-Ag alloy

199

Creep behaviour at elevated temperatures of an Al-Cu-Mg-Ag alloy

200

Creep behaviour determination of monolayer plasma-sprayed coatings under dynamic or static loads

201

Creep behaviour leading to Type IV cracking for service-exposed 1.25Cr–0.5Mo steel welds

202

Creep behaviour of 14Cr–15Ni–Ti stainless steel at 923 K

203

Creep behaviour of a 2124 Al alloy reinforced by 20 vol.% silicon carbide particulates

204

Creep behaviour of a 2124 Al alloy reinforced by 20 vol.% silicon carbide particulates

205

Creep behaviour of a cast TiAl-based alloy for industrial applications

206

Creep behaviour of a new air-hardenable intermetallic Ti–46Al–8Ta alloy

207

Creep behaviour of a Ni15Cr solid solution alloy at low stresses and intermediate temperatures

208

Creep behaviour of a Ni15Cr solid solution alloy at low stresses and intermediate temperatures

209

Creep behaviour of a QE22–SiC particle reinforced composite investigated by acoustic emission and scanning electron microscopy

210

Creep behaviour of a QE22–SiC particle reinforced composite investigated by acoustic emission and scanning electron microscopy

211

Creep behaviour of a SiC/Si-B-C composite with a self-healing multilayered matrix

212

Creep behaviour of alumina/YAG composites prepared by different sintering routes

213

Creep behaviour of alumina/YAG nanocomposites obtained by a colloidal processing route

214

Creep behaviour of alumina–mullite–zirconia nanocomposites obtained by a colloidal processing route

215

Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites

216

Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites

217

Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites

218

Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites

219

Creep behaviour of an Al–8.5Fe–1.3V–1.7Si–15SiCp composite at temperatures ranging from 873 to 948 K

220

Creep behaviour of an Al–8.5Fe–1.3V–1.7Si–15SiCp composite at temperatures ranging from 873 to 948 K

221

Creep behaviour of an oxide dispersion strengthened Al–5Mg alloy reinforced by silicon carbide particulates — an oxide dispersion strengthened Al–5Mg–30SiCp composite

222

Creep behaviour of an oxide dispersion strengthened Al–5Mg alloy reinforced by silicon carbide particulates — an oxide dispersion strengthened Al–5Mg–30SiCp composite

223

Creep behaviour of as received, aged and cold worked INCONEL 617 at 850 °C and 950 °C

224

Creep behaviour of bamboo

225

Creep behaviour of CFRP-strengthened reinforced concrete beams

226

Creep behaviour of Fe3Al-based alloys in DO3 phase field

227

Creep behaviour of Fe–Mn–Al steel from 500 to 800 °C: Part 1: Analysis of constant-load creep data

228

Creep behaviour of Fe–Mn–Al steel from 500 °C to 800 °C: Part 2: Aspects of rupture strength and parametric analysis

229

Creep Behaviour of Fly Ash-Based Geopolymer Concrete

230

Creep behaviour of FRP-reinforced polymer concrete

231

CREEP BEHAVIOUR OF FULL SIZE WELDED JOINTS: DESIGN IMPROVEMENTS

232

CREEP BEHAVIOUR OF FULL-SIZE WELDED JOINTS: DEFECT ACCEPTANCE CRITERIA

233

Creep behaviour of icosahedral Al–Cu–Fe

234

Creep behaviour of icosahedral Al–Cu–Fe

235

Creep behaviour of iron–aluminium–chromium intermetallics strengthened by nano-sized oxide particles

236

Creep behaviour of layered silicate/starch–polycaprolactone blends nanocomposites

237

Creep behaviour of leaded brass

238

Creep behaviour of leaded brass

239

Creep behaviour of membrane and substrate materials for oxygen separation units

240

Creep behaviour of Mg–8% Sn and Mg–8% Sn–3% Al–1% Si alloys

241

Creep behaviour of modified 9Cr–1Mo ferritic steel

242

Creep behaviour of MoSi2–HfO2 composites

243

Creep behaviour of natural rock salt and its description with the composite model

244

Creep behaviour of natural rock salt and its description with the composite model

245

Creep behaviour of near γ-TiAl base alloys: Effects of microstructure and alloy composition

246

Creep behaviour of near γ-TiAl base alloys: Effects of microstructure and alloy composition

247

Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction Original Research Article

248

Creep behaviour of ODS aluminium reinforced by silicon carbide particulates: ODS Al–30SiCp composite

249

Creep behaviour of ODS aluminium reinforced by silicon carbide particulates: ODS Al–30SiCp composite

250

Creep behaviour of ODS steels

251

Creep behaviour of ODS steels

252

Creep behaviour of porous metal supports for solid oxide fuel cells

253

Creep behaviour of porous SOFC electrodes: Measurement and application to Ni-8YSZ cermets

254

Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1 alloy

255

Creep behaviour of the ZM21 wrought magnesium alloy

256

Creep behaviour of Ti3Al-based titanium aluminide alloys containing molybdenum

257

Creep behaviour of Ti3Al-based titanium aluminide alloys containing molybdenum

258

Creep behaviour of Ti-6Al-2Sn-4Zr-2Mo: II. Mechanisms of deformation Original Research Article

259

Creep behaviour of tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ gas separation membranes

260

Creep behaviour of two sintered silicon nitride ceramics

261

Creep behaviour of U–6%Zr alloy by impression creep technique

262

Creep behaviour of ultrafine-grained oxide dispersion strengthened copper prepared by cryomilling

263

Creep behaviour of ultrafine-grained oxide dispersion strengthened copper prepared by cryomilling

264

Creep behaviour of ultrafine-grained oxide dispersion strengthened copper prepared by cryomilling

265

Creep behaviour of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy

266

Creep behaviour of δ-phase of U–Zr system by impression creep technique

267

Creep behaviour prediction and optimum design of plasma sprayed coatings with intermediate bonding layer

268

Creep bending of thin-walled shells and plates by consideration of finite deflections

269

Creep buckling and post-buckling analysis of the laminated piezoelectric viscoelastic functionally graded plates

270

Creep Buckling of Shallow Parabolic Concrete Arches

271

Creep cavitation in metals

272

Creep characteristics and internal stress in γ-TiAl

273

Creep characteristics and internal stress in γ-TiAl

274

Creep characteristics and microstructure in nano-particle strengthened AA6082

275

Creep characteristics in carbon free new martensitic alloys

276

Creep characteristics of asphalt modified by radial styrene–butadiene–styrene copolymer

277

Creep characteristics of porous Ni/Ni3Al anodes for molten carbonate fuel cells

278

Creep characterization and damage assessment of long term service exposed P-22 grade of steel

279

Creep characterization of a duplex Ti-Al base alloy at 700 and 750 °C

280

Creep characterization of a duplex Ti-Al base alloy at 700 and 750 °C

281

Creep characterization of a Ni-based Hastelloy-X alloy by using theta projection method

282

Creep compliance mapping by atomic force microscopy

283

Creep considerations for the lower head

284

Creep constitutive equation of dual phase 9Cr-ODS steel

285

Creep constitutive equations for cold-drawn 304L stainless steel

286

Creep constraint analysis and constraint parameter solutions for axial semi-elliptical surface cracks in pressurized pipes

287

Creep crack growth characteristics of polypropylene film at various temperatures

288

Creep crack growth in phosphorus alloyed oxygen free copper

289

CREEP CRACK GROWTH MICROMECHANISMS AT 405°C IN COLD BENT TUBES OF A C-Mn-Mo STEEL

290

Creep crack growth simulations in 316H stainless steel

291

Creep crack initiation and creep crack growth assessments in welded structures

292

Creep crack initiation and creep crack growth assessments in welded structures Original Research Article

293

Creep crack initiation at a free edge of an interface between submicron thick elements

294

Creep curve measurement to support wear and adhesion modelling, using a continuously variable creep twin disc machine

295

Creep damage and crack initiation behaviour of nickel-base single crystalline superalloys compact tension specimen with a void ahead of crack tip

296

Creep damage and long term life modelling of an X20 steam line component

297

Creep damage assessment for notched bar specimens of a low alloy steel considering stress multiaxiality

298

Creep damage characterization using a low amplitude nonlinear ultrasonic technique

299

Creep damage characterization using non-linear ultrasonic techniques Original Research Article

300

Creep damage evolution equations expressed in terms of dissipated power

301

Creep damage evolution equations expressed in terms of dissipated power

302

Creep damage evolution equations expressed in terms of dissipated power

303

Creep damage evolution in a modeling specimen of nickel-based single crystal superalloys air-cooled blades

304

Creep damage in different 3Al2O3·2SiO2 mullites tested in 4-point bending

305

Creep damage in SiC/SiC composites

306

Creep damage in SiC/SiC composites

307

Creep damage in welded joints of a Ni-base heat-resistant alloy Hastelloy XR

308

Creep damage in welded joints of a Ni-base heat-resistant alloy Hastelloy XR

309

Creep damage mechanism and γ′-phase morphology of a V-notched round bar in Ni-based single crystal superalloys

310

Creep damage mechanisms in polyethylene gas pipes

311

Creep damage modeling based on ultrasonic velocities in copper

312

Creep damage modelling for quasi-brittle materials

313

Creep damage resistance of ceramic–matrix composites

314

Creep damage study at powercycling of lead-free surface mount device

315

Creep deflection of viscoelastic laminated cylindrical panels with initial deflection under axial compression

316

Creep deformation and crack growth rates of a super α2 titanium aluminide alloy

317

Creep deformation and failure of E911/E911 and P92/P92 similar weld-joints

318

Creep deformation and mechanisms in Haynes 230 at 800 °C and 900 °C

319

Creep deformation and rafting in nickel-based superalloys simulated by the phase-field method using classical flow and creep theories Original Research Article

320

Creep deformation and rupture behaviour of 9Cr–1W–0.2V–0.06Ta Reduced Activation Ferritic–Martensitic steel

321

Creep deformation and rupture behaviour of directionally solidified GTD 111 superalloy

322

Creep deformation behavior and dislocation substructures of Mg–Y binary alloys

323

Creep deformation behavior and dislocation substructures of Mg–Y binary alloys

324

Creep deformation behavior of Sn–3.5Ag solder/Cu couple at small length scales Original Research Article

325

Creep deformation behavior of spherical Al2O3 particle-reinforced Al–Mg matrix composites at high temperatures Original Research Article

326

Creep deformation characteristics of discontinuously reinforced aluminium-matrix composites

327

Creep deformation in two-phase titanium aluminide alloys

328

Creep deformation in two-phase titanium aluminide alloys

329

Creep deformation mechanism of cryomilled NiCrAlY bond coat material

330

Creep deformation mechanism of magnesium-based alloys

331

Creep deformation mechanisms in fine-grained niobium Original Research Article

332

Creep deformation mechanisms in modified 9Cr–1Mo steel

333

Creep deformation modelling of superalloy single crystals Original Research Article

334

Creep deformation of a sixth generation Ni-base single crystal superalloy at 800 °C

335

Creep deformation of Alloys 617 and 276 at 750–950 °C

336

Creep deformation of austenitic steels at medium and low temperatures Original Research Article

337

Creep Deformation of Fiber Reinforced Plastics-Plated Reinforced Concrete Tensile Members

338

Creep deformation of iron strengthened by MX type particles

339

Creep deformation of Pb–Sn–Zn ternary alloys

340

Creep deformation of restorative resin-composites intended for bulk-fill placement

341

Creep deformation of single crystals of binary and some ternary MoSi2 with the C11b structure

342

Creep deformation of α2 Ti3Al intermetallics in the low stress region

343

Creep deformation of α2 Ti3Al intermetallics in the low stress region

344

Creep deformation related to dislocations cutting the γ′ phase of a Ni-base single crystal superalloy

345

Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure

346

Creep densification behavior of micro and nano metal powder: Grain size-dependent model Original Research Article

347

Creep ductility of 1Cr1Mo1/4V low alloy forging and casting steels

348

Creep effect on the behavior of concrete beams reinforced with GFRP bars subjected to different environments

349

Creep effects in activated sludge filter cakes

350

Creep effects in nanoindentation of hydrated phases of cement pastes

351

Creep effects on crack growth in a Mo–Si–B alloy Original Research Article

352

Creep elastic follow-up factors under multi-axial displacement-controlled loading

353

Creep elastic follow-up factors under multi-axial displacement-controlled loading

354

Creep Evolution Analysis of Composite Cylinder Made of Polypropylene Reinforced by Functionally Graded MWCNTs

355

Creep failure mechanisms of a Ti-6Al-4V thick plate

356

Creep failure model of a tempered martensitic stainless steel integrating multiple deformation and damage mechanisms

357

Creep failure of a spray drier

358

Creep failure of cracking heater at a petrochemical plant

359

Creep failure of low pressure turbine blade of an aircraft engine

360

Creep failure simulations of 316H at 550 °C: Part I – A method and validation

361

Creep failure simulations of 316H at 550 °C: Part II – Effects of specimen geometry and loading mode

362

Creep failure time prediction of polymers and polymer composites

363

Creep failures of overheated boiler, superheater and reformer tubes

364

Creep feed grinding of a gamma titanium aluminide intermetallic alloy using SiC abrasives

365

Creep feed profile grinding of Ni-based superalloys with ultrafine-polycrystalline cBN abrasive grits

366

Creep finite element simulation of multilayered system with interfacial cracks

367

Creep flow and pressure relaxation in bubbly medium

368

Creep flow, diffusion, and electromigration in small scale interconnects

369

Creep force characteristics between rail and wheel on scaled model

370

Creep forces in simulations of traction vehicles running on adhesion limit

371

Creep forming of high strength polyethylene fiber prepregs for the production of ballistic protection helmets

372

Creep fracture at interfaces of titanium nanocolumns on silicon substrate

373

Creep fracture of the centrifugally-cast superaustenitic steels, HK40 and HP40

374

Creep fracture of zirconium alloys

375

Creep fracture toughness using conventional and cell element approaches

376

Creep functions of dental ceramics measured in a beam-bending viscometer

377

Creep in commercially pure metals

378

Creep in commercially pure metals Original Research Article

379

Creep in concrete beams strengthened with composite materials

380

Creep in copper dispersion strengthened with alumina particles (ODS copper)

381

Creep in copper dispersion strengthened with alumina particles (ODS copper)

382

Creep in electrodeposited submicrocrystalline nickel and its particle-reinforced nanocomposite

383

Creep in ferroelectrics due to unipolar electrical loading

384

Creep in injection molded starch/synthetic polymer blends

385

Creep in injection molded starch/synthetic polymer blends

386

Creep in injection molded starch/synthetic polymer blends

387

Creep in mechanically alloyed NiAl

388

Creep in mechanically alloyed NiAl

389

Creep in nanocrystalline materials: Role of stress assisted grain growth

390

Creep in ODS copper reinforced with alumina short fibres—DRS copper

391

Creep in phosphorus alloyed copper during power-law breakdown

392

Creep in scandia stabilized zirconia

393

Creep in ultrafine grained aluminium

394

Creep in ultrafine grained aluminium

395

Creep in ultrafine grained aluminium

396

Creep in vacuum of woven Sylramic-iBN melt-infiltrated composites

397

Creep in α-Al2O3 thermally grown on β-NiAl and NiAlPt alloys

398

Creep influence on buckling resistance of reinforced concrete shells

399

Creep life assessment of a die-cast Mg–5Al–0.3Mn alloy

400

Creep Life Assessment of a Super-Heater Tube

401

Creep life assessment of distribution transformers

402

Creep Life Forecasting of Weldment

403

Creep life prediction of 9Cr–1Mo steel under multiaxial state of stress

404

Creep life prediction of a high strength steel plate

405

Creep life prediction of service-exposed turbine blades

406

Creep life prediction under stepwise constant uniaxial stress and temperature conditions

407

Creep mechanical behaviour of modified 9Cr1Mo steel weldments: Experimental analysis and modelling

408

Creep mechanism of highly purified V–4Cr–4Ti alloys during thermal creep in a vacuum

409

Creep mechanisms and physical modeling for Ti–6Al–4V

410

Creep mechanisms and physical modeling for Ti–6Al–4V

411

Creep mechanisms in an Mg–4Zn alloy in the as-cast and aged conditions

412

Creep mechanisms in particle strengthened α-Titanium–Ti2Co alloys

413

Creep mechanisms in particle strengthened α-Titanium–Ti2Co alloys

414

Creep mechanisms in quasi-plastic silicon nitride by instrumented indentation

415

Creep mechanisms in Ti–3Al–2.5V alloy tubing deformed under closed-end internal gas pressurization Original Research Article

416

Creep mechanisms of ferritic oxide dispersion strengthened alloys

417

Creep mechanisms of laminated alumina/zirconia-toughened alumina composites

418

Creep mechanisms of U720Li disc superalloy at intermediate temperature

419

Creep model for unsaturated soils in sliding zone of Qianjiangping landslide

420

Creep Modeling in Excavation Analysis of a High Rock Slope

421

Creep of a beta phase-containing TiAl alloy

422

Creep of a composite with a diffusional creeping matrix

423

Creep of a composite with a diffusional creeping matrix

424

Creep of a composite with a diffusional creeping matrix

425

Creep of a heat treated Mg–4Y–3RE alloy

426

Creep of a heat treated Mg–4Y–3RE alloy

427

Creep of a TiAl alloy: a comparison of indentation and tensile testing

428

Creep of Al–0.2Sc–0.04Zr alloys after different cold-rolling and ageing combinations

429

Creep of aluminium–magnesium open cell foam Original Research Article

430

Creep of aluminum syntactic foams

431

Creep of an Al2O3–SiC(whisker)–TiC(particle) composite1

432

Creep of an Al2O3–SiC(whisker)–TiC(particle) composite1

433

Creep of AZ31 Mg alloy: A comparison of impression and tensile behavior

434

Creep of cast Fe–36Al–2Ti alloy

435

Creep of CMSX-4 single crystals of different orientations in tension and compression

436

Creep of CMSX-4 single crystals of different orientations in tension and compression

437

Creep of concrete masonry walls strengthened with FRP composites

438

Creep of copper canisters in power-law breakdown

439

Creep of crystalline materials: experimental basis, mechanisms and models

440

Creep of crystalline materials: experimental basis, mechanisms and models

441

Creep of directionally solidified alumina/YAG eutectic monofilaments

442

Creep of epoxy–clay nanocomposite adhesive at the FRP interface: A multi-scale investigation

443

Creep of ex-service 0.5CrMoV steel at low strain rates

444

Creep of Fe–18Al–4Cr alloy with zirconium addition

445

Creep of FRP-wrapped concrete columns with or without fly ash under axial load

446

Creep of garnet in eclogite: Mechanisms and implications

447

Creep of glutaraldehyde-crosslinked gelatin films

448

Creep of heat treated silicon nitride with neodymium and yttrium oxides additions

449

Creep of Heat-Resistant Composites of an Oxide-Fiber/Ni-Matrix Family

450

Creep of hexagonal honeycombs with Plateau borders

451

Creep of high strength concrete filled steel tube columns

452

Creep of high-strength Mg-Ni-Y-RE alloys

453

Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries

454

Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries

455

Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries

456

Creep of magnesium strengthened with high volume fractions of yttria dispersoids

457

Creep of magnesium strengthened with high volume fractions of yttria dispersoids

458

Creep of metal-matrix composites with elastic fibers—Part I: Continuous aligned fibers

459

Creep of metal-matrix composites with elastic fibers—Part II: A damage model

460

Creep of monolithic and fibre-reinforced silicon carbide

461

Creep of nanocrystalline Cu, Pd, and Al-Zr

462

Creep of nanocrystalline Y-SZP ceramics

463

Creep of Nextel™720/alumina–mullite ceramic composite at 1200 °C in air, argon, and steam

464

Creep of open-cell Voronoi foams

465

Creep of open-cell Voronoi foams

466

Creep of open-cell Voronoi foams

467

Creep of phyllosilicates at the onset of plate tectonics

468

Creep of Poly(Vinyl Chloride)/ Chlorinated Polyethylene Blends

469

Creep of polycrystalline SrCo0.8Fe0.2O3−δ Original Research Article

470

Creep of polycrystalline yttrium aluminum garnet (YAG) at elevated temperature in air and in steam

471

Creep of Polymer Matrix Composites. I: Norton/Bailey Creep Law for Transverse Isotropy

472

Creep of Polymer Matrix Composites. II: Monkman-Grant Failure Relationship for Transverse Isotropy

473

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

474

Creep of replicated microcellular aluminium Original Research Article

475

Creep of sandwich beams with metallic foam cores

476

Creep of sandwich beams with metallic foam cores

477

Creep of sandwich beams with metallic foam cores

478

Creep of silicon nitride

479

Creep of single crystalline and polycrystalline T2 phase in the Mo–Si–B system

480

Creep of the orthorhombic phase based on the intermetallic Ti2AlNb

481

Creep of thin film Au on bimaterial Au/Si microcantilevers Original Research Article

482

Creep of trabecular bone from the human proximal tibia

483

Creep of UHPC in tension and compression: Effect of thermal treatment

484

Creep of uncoated and Cu–Cr coated NARloy–Z

485

Creep of uncoated and Cu–Cr coated NARloy–Z

486

Creep of V–4Cr–4Ti in a lithium environment

487

Creep of Wood I-Joists Exposed to Abnormally High Moisture Conditions

488

Creep of Zr-doped alumina at very low creep rates

489

Creep plastic zone and crack initiation in double edge notched specimens of 304 stainless steel at 650 °C

490

Creep prediction of a layered fiberglass plastic

491

Creep prediction of concrete for reactor containment structures Original Research Article

492

Creep processes in pure aluminium processed by equal-channel angular pressing

493

Creep properties and effect factors of hot continuous rolled Ti–6Al–4V alloy

494

Creep properties and microstructures of helium implanted AISI 316L electron-beam weld and parent material

495

Creep properties and precipitate evolution in Al–Li alloys microalloyed with Sc and Yb

496

Creep properties beyond 1100 °C and microstructure of Co–Re–Cr alloys

497

Creep properties of a fully-lamellar Ti–48Al–2Cr–2Nb alloy

498

Creep properties of a fully-lamellar Ti–48Al–2Cr–2Nb alloy

499

Creep properties of a Mg–Al–Ca alloy produced by different casting technologies

500

Creep properties of a Pt–aluminide coating Original Research Article

501

Creep properties of a reduced activation 9Cr3WVTaB martensitic steel after helium implantation

502

Creep properties of a thermally grown alumina

503

Creep properties of aged duplex stainless steels containing σ phase

504

Creep properties of aged duplex stainless steels containing σ phase

505

Creep properties of Al3Sc and Al3(Sc, X) intermetallics Original Research Article

506

Creep properties of an Al-2024 composite reinforced with SiC particulates

507

Creep properties of an Al-2024 composite reinforced with SiC particulates

508

Creep properties of an extruded copper–8% chromium–4% niobium alloy

509

Creep properties of an extruded copper–8% chromium–4% niobium alloy

510

Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio

511

Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio

512

Creep properties of annealed Zr–Nb–O and stress-relieved Zr–Nb–Sn–Fe cladding tubes and their performance comparison

513

Creep properties of cement and asphalt mortar

514

Creep properties of different γ′-strengthened Co-base superalloys

515

Creep properties of low-temperature sintered nano-silver lap shear joints

516

Creep properties of service-exposed Alloy 625 after re-solution annealing treatment

517

Creep properties of service-exposed Alloy 625 after re-solution annealing treatment

518

Creep properties of V–4Cr–4Ti strengthened by cold working and aging

519

Creep Properties of Walikukun (Schouthenia ovata) Timber Beams

520

Creep property and microstructure evolution of a nickel-base single crystal superalloy in [011] orientation

521

Creep property comparisons for ceramic-fibre-reinforced ceramic–matrix composites

522

Creep property evaluation of a 2.25Cr–1Mo low alloy steel

523

Creep property measurements of welded joint of reduced-activation ferritic steel by the small-punch creep test

524

Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steels

525

Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steels

526

Creep resistance comparison of two solid oxygen fuel cell electrolytes with the fluorite structure: cubic zirconia and doped-ceria

527

Creep resistance of directionally solidified ceramic eutectics of Al203/c-Zr02 with sub-micron columnar morphologies

528

Creep resistance of directionally solidified ceramic eutectics of Al203/c-Zr02 with sub-micron columnar morphologies

529

Creep resistance of the directionally solidified ceramic eutectic of Al2O3/c-ZrO2(Y2O3): experiments and models

530

Creep resistant polymeric nanocomposites

531

Creep response and deformation processes in nanocluster-strengthened ferritic steels Original Research Article

532

Creep response of glued-laminated beam reinforced with pre-stressed sub-laminated composite

533

Creep response of thixotropic ambient temperature cure adhesives measured by DMTA in static tension and shear

534

Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant

535

Creep rupture and viscoelastoplasticity of polypropylene

536

Creep rupture behavior of 9Cr–1.8W–0.5Mo–VNb (ASME grade 92) ferritic steel weld joint

537

Creep rupture behavior of Grade 91 steel

538

Creep rupture behavior of semi-solid cast 7075-T6 Al alloy

539

Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite

540

Creep rupture behaviour of P92 steel weldment

541

Creep rupture life and damage evaluation under multiaxial stress state for type 304 stainless steel

542

Creep rupture life and variation of micro-structure according to aging time and creep test methods

543

Creep rupture mechanisms of 5083-Al alloy under multiaxial stress states

544

Creep rupture of [90]8 Sigma fibre reinforced titanium matrix composite

545

Creep rupture of [90]8 Sigma fibre reinforced titanium matrix composite

546

Creep rupture of a 9Cr1MoNbV steel at 500 °C: Base metal and welded joint Original Research Article

547

Creep rupture of a GFRP composite at elevated temperatures

548

Creep rupture of copper and aluminium alloy under combined loadings—experiments and their various descriptions

549

Creep rupture of copper and aluminium alloy under combined loadings—experiments and their various descriptions

550

Creep rupture of copper and aluminium alloy under combined loadings—experiments and their various descriptions

551

Creep rupture of polymers-a statistical model

552

Creep rupture properties of die-cast Mg–Al–Ca alloys

553

Creep rupture properties of helium implanted V–4Cr–4Ti alloy NIFS-HEAT-2

554

Creep rupture properties of nitrogen added 10Cr ferritic/martensitic steels

555

Creep rupture property of in situ synthesized (TiB + La2O3)/Ti composite

556

Creep rupture strength of activated-TIG welded 316L(N) stainless steel

557

Creep rupture strength of heat affected zone for 9Cr ferritic heat resisting steels

558

Creep rupture strength of heat affected zone for 9Cr ferritic heat resisting steels Original Research Article

559

Creep sagging analysis of pressure pipes

560

Creep sagging analysis of pressure pipes II: Damage accumulation under variable temperature and pressure conditions

561

Creep simulation of 9–12% Cr steels using the composite model with thermodynamically calculated input

562

Creep simulation of 9–12% Cr steels using the composite model with thermodynamically calculated input

563

Creep simulation of asymmetric effects at large strains by stress mode decomposition Original Research Article

564

Creep simulation of asymmetric effects by use of stress mode dependent weighting functions

565

Creep small-punch testing and its numerical simulations

566

Creep Stability of Thin-Walled Composite Structures

567

Creep Strain and Permeability Evolution in Cracked Granite Subjected to Triaxial Stress and Reactive Flow

568

Creep Strain and Stress Analysis in Laminated Composite Pressure Vessels

569

Creep strain versus residual strain of a concrete loaded under various levels of compressive stress

570

Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy

571

Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy

572

Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy

573

Creep strength degradation of ASME P23/T23 steels

574

Creep strength of a tungsten–rhenium–hafnium carbide alloy from 2200 to 2400 K

575

Creep strength of a tungsten–rhenium–hafnium carbide alloy from 2200 to 2400 K

576

Creep strength of centrifugally cast Al-rich TiAl alloys

577

Creep strength of nickel oxide/zirconia composites under different environmental atmospheres

578

Creep strength of reduced activation ferritic/martensitic steel Eurofer’97

579

Creep strength of Zircaloy-4 cladding depending on applied stress and annealing temperature

580

Creep strengthening of Ni3(Al, Si) intermetallic alloy by ductile precipitates

581

Creep Stress Redistribution Analysis of Thick-Walled FGM Spheres

582

Creep studies of AZ91D pressure die casting

583

Creep studies of AZ91D pressure die casting

584

Creep studies of coarse-grained AZ91D magnesium castings

585

Creep studies of coarse-grained AZ91D magnesium castings

586

Creep studies on U–7%Zr, U–7%Nb and U rich U–Nb–Zr alloys

587

Creep surge effect under cyclic irradiation of structural materials for fusion reactors

588

Creep tests on GFRP pultruded specimens subjected to traction or shear

589

Creep theory for transversely isotropic solids sustaining unilateral damage

590

Creep, creep-rupture tests of Al-surface-alloyed T91 steel in liquid lead bismuth at 500 and 550 °C

591

Creep, fatigue and oxidation in crack growth in advanced nickel base superalloys

592

Creep, plasticity, and fatigue of single crystal superalloy

593

Creep-based life prediction modelling of aluminium in fire

594

Creep-buckling of cellular solids Original Research Article

595

Creep-buckling of hexagonal honeycombs with dual imperfections

596

Creep-buckling of hexagonal honeycombs with plateau borders

597

Creep-buckling of open-cell foams Original Research Article

598

Creep-damage assessment of high chromium heat resistant steels and weldments

599

Creep-damaged pipe steels probed with positron spectroscopy

600

Creep-driven nitride scale growth in γ-TiAl Original Research Article

601

Creep–fatigue behavior at high temperature of a UDIMET 720 nickel-base superalloy

602

Creep-fatigue behaviour of CoCr22Ni22W14 in the temperature range 850 °C < T < 1200 °C

603

Creep-fatigue behaviour of CoCr22Ni22W14 in the temperature range 850 °C < T < 1200 °C

604

Creep–fatigue crack growth behaviour of a nickel-based powder metallurgy superalloy under high temperature

605

Creep-Fatigue Crack Growth Interaction in Nickel Base Supper Alloy

606

Creep–fatigue crack propagation in lead-free solder under cyclic loading with various waveforms

607

Creep-fatigue damage assessment by subsequent fatigue straining Original Research Article

608

Creep-fatigue damage evaluation of sodium to air heat exchanger in sodium test loop facility

609

Creep–fatigue damage for a structure with dissimilar metal welds of modified 9Cr–1Mo steel and 316L stainless steel

610

Creep-fatigue design evaluations including daily load following operations for the advanced burner test reactor Original Research Article

611

Creep-fatigue evaluation of stainless steel welded joints in FBR class 1 components

612

Creep–fatigue evaluation of stainless steel welded joints in FBR class 1 components Original Research Article

613

Creep-fatigue failure of an aero engine turbine blades

614

Creep–fatigue interaction and related structure property correlations of EUROFER97 steel at 550 °C by decoupling creep and fatigue load

615

Creep–fatigue interaction behaviour of a 15Cr–15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure

616

Creep–fatigue interaction behaviour of a 15Cr–15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure

617

Creep–fatigue interaction damage model and its application in modified 9Cr–1Mo steel

618

Creep–fatigue interaction of the ODS superalloy PM 1000

619

Creep–fatigue life of Sn–8Zn–3Bi solder under multiaxial loading

620

Creep-fatigue life prediction under fully-reversed multiaxial loading at high temperatures

621

Creep-fatiguebehaviourofanAISIstainlesssteelat550°COriginalResearchArticle

622

Creep-fatigue–environment interactions in INCONEL 617

623

Creep-fatigue–environment interactions in INCONEL 617

624

Creep–fatigue-oxidation interaction in Grade 91 steel weld joints for high temperature applications

625

Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part I: Effect of tensile holding period on fatigue lifetime

626

Creep-fatigue-oxidation interactions in a 9Cr–1Mo martensitic steel. Part II: Effect of compressive holding period on fatigue lifetime

627

Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part III: Lifetime prediction

628

Creeping along the Ismetpasa section of the North Anatolian fault (Western Turkey): Rate and extent from InSAR

629

Creeping analysis with variable temperature applying the boundary element method

630

Creeping attachment after free connective tissue graft for treatment of gingival recession

631

Creeping damage around an opening in rock-like material containing non-persistent joints

632

Creeping Environmental Problems and Sustainable Development in the Aral Sea Basin: edited by Glantz, M.H., Cambridge University Press, Cambridge, United Kingdom, 1999. Hardcover, XII+291 pp., Price £50.00., ISBN 0-521-62086-4

633

Creeping environmental problems and sustainable development in the Aral Sea Basin: edited by M.H. Glantz, Cambridge University Press, 1999, 291 pp.

634

Creeping Environmental Problems and Sustainable Development in The Aral Sea Basin: M.H. Glantz (Editor). Cambridge Univ. Press, Cambridge. 1999. Xii plus 291 pp., ISBN 0-521-62086-4, Hardcover GBP 50.00

635

Creeping flow of a polymeric liquid passing over a transverse slot with viscous dissipation

636

Creeping flow of generalized Newtonian fluid through a fixed and a fluidized bed of spherical particles

637

Creeping flow of viscoelastic fluid through fixed beds of particles

638

Creeping flow of viscoplastic materials through a planar expansion followed by a contraction

639

Creeping flow past and within a permeable spheroid

640

Creeping flow through ordered arrays of micro-cylinders embedded in a rectangular minichannel

641

Creeping instability in YBCO ceramics under non-isothermal superconducting transition

642

Creeping motion of a slip spherical particle in a circular cylindrical pore

643

Creeping motions of a porous spherical shell in a concentric spherical cavity

644

Creep-resistant behavior of MWCNT-polycarbonate melt spun nanocomposite fibers at elevated temperature

645

Creep-resistant behavior of self-reinforcing liquid crystalline epoxy resins

646

Creep-resistant elastomeric networks prepared by photocrosslinking fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers

647

Creep-resistant magnesium alloys

648

Creep-resistant magnesium alloys

649

Creep-rupture lifetime simulation of unidirectional metal matrix composites with and without time-dependent fiber breakage

650

Creep-rupture prediction for steels and alloys by parametric methods and the base diagram method. Part 1. Interpolation analysis of experimental data

651

Creep-rupture prediction for steels and alloys by parametric methods and the base diagram method. Part 2. Extrapolation analysis of experimental data

652

Creep-rupturing of cellular materials: Regular hexagonal honeycombs with dual imperfections

653

Creep-rupturing of elliptical and circular cell honeycombs

654

Creep-rupturing of open-cell foams Original Research Article

655

Creep-to-rupture of 9%Cr steel T91 in air and oxygen-controlled lead at 650 °C

656

Creep-to-rupture of the steel P92 at 650 °C in oxygen-controlled stagnant lead in comparison to air

657

Creep-to-rupture tests of T91 steel in flowing Pb–Bi eutectic melt at 550 °C

658

cRel induces mitochondrial alterations in correlation with proliferation arrest

659

Cre–lox recombination: Cre-ative tools for plant biotechnology

660

CREM deficiency in mice alters the response of bone to intermittent parathyroid hormone treatment

661

cremona Italian scientist investigated after animal cloning experiment

662

Cremona transformations and some related algebras

663

Cremona transformations and the conundrum of dimensionality and signature of macro-spacetime

664

Cremonian space–time(s) as an emergent phenomenon

665

Crenate broomrape (Orobanche crenata) infection in field pea cultivars

666

Crenulated seafloor: Evidence for spreading-rate dependent structure of mantle upwelling and melting beneath a mid-oceanic spreading center

667

Crenulation cleavage formation: Evolving diffusion, deformation and equilibration mechanisms with increasing metamorphic grade

668

Creodonts and carnivores from the Middle Miocene Muruyur Formation at Kipsaraman and Cheparawa, Baringo District, Kenya

669

Creole discourse effects on the speech conjunctive system in expository texts

670

CREOLE experiment study on the reactivity temperature coefficient with sensitivity and uncertainty analysis using the MCNP5 code and different neutron cross section evaluations

671

CREOLE: a Universal Language for Creating, Requesting, Updating and Deleting Resources

672

CreonʹS first TiO2 conference sheds light on the Russian market

673

CREPT Accelerates Tumorigenesis by Regulating the Transcription of Cell-Cycle-Related Genes

674

CREPT-MCNP code for efficiency calibration of HPGe detectors with the representative point method

675

Crescent and Electoral Strength: Islamic Party Portrait of Reform Era In Indonesia

676

Crescent pondʹʹs effect on some chemical properties of soil

677

Crescentic distal metatarsal osteotomy for the treatment of hallux valgus: a prospective, randomized, controlled study of two different fixation methods

678

Crescentic glomerulonephritis developing in the course of idiopathic membranoproliferative glomerulonephritis

679

Crescentic Glomerulonephritis in a Sub-Saharan Country: Clinical Presentation, Etiological and Evolutive Profile

680

Crescentic glomerulonephritis in non-asthmatic Churg-Strauss syndrome

681

Crescentic Glomerulonephritis, A Rare Presentation of Alport Syndrome

682

Crescentic Transformation in Primary Membranous Glomerulopathy: Association with Anti-GBM Antibody

683

Crescent-shaped morphotectonic features in the Gulf of Cadiz (offshore SW Iberia)

684

Cresol novolac–epoxy networks: properties and processability

685

Cresol Red Thallium Acetate Sucrose Inulin (CTSI) agar for the selective recovery of Carnobacterium spp.

686

Cresolase, catecholase and laccase activities in haemocytes of the red swamp crayfish

687

Cresol–formaldehyde based carbon aerogel as electrode material for electrochemical capacitor

688

Cress and Potato Soluble Epoxide Hydrolases: Purification, Biochemical Characterization, and Comparison to Mammalian Enzymes

689

Cressie and Read power-divergences as influence measures for logistic regression models

690

Cressie and Read power-divergences as influence measures for logistic regression models

691

CRESST direct Dark Matter search with cryogenic detectors

692

CRESST: First results with the phonon-light technique

693

CRESST: First results with the phonon-light technique

694

Cresst-II: dark matter search with scintillating absorbers

695

Cresst-II: dark matter search with scintillating absorbers

696

Cresswell, W., Lind, J., Kaby, U., Quinn, J. L. & Jakobsson, S. 2003. Does an opportunistic predator preferentially attack nonvigilant prey? Animal Behaviour, 66, 643–648

697

Crest lines for surface segmentation and flattening

698

Crestal unconformities on an exposed Jurassic tilted fault block, Wollaston Forland, East Greenland as an analogue for buried hydrocarbon traps

699

CRESTED PRODUCTS OF ASSOCIATION SCHEMES

700

Crested Saguaros: What is the Rhyme or Reason?

701

Cresyl diphenyl phosphate as flame retardant additive for lithium-ion batteries

702

Cretaceous — Eocene Volcanism Along Eastern Coast, India — Its Implications

703

Cretaceous (Wealden) climates: a modelling perspective

704

Cretaceous albitization and dequartzification of Hercynian peraluminous granite in the Salvezines Massif (French Pyrénées)

705

Cretaceous alkaline intra-plate magmatism in the Ecuadorian Oriente Basin: Geochemical, geochronological and tectonic evidence

706

Cretaceous alteration of Jurassic volcanic rocks, Pain Mesa, northern Victoria Land, Antarctica

707

Cretaceous and Cenozoic non-marine deposits of the Northern South Yellow Sea Basin, offshore western Korea: palynostratigraphy and palaeoenvironments

708

Cretaceous and early Tertiary climates of Antarctica: evidence from fossil wood

709

Cretaceous and tertiary inversion in the Bjørnøyrenna Fault Complex, south-western Barents Sea

710

Cretaceous angiosperm flowers: Innovation and evolution in plant reproduction

711

Cretaceous basaltic phreatomagmatic volcanism in West Texas: Maar complex at Peٌa Mountain, Big Bend National Park

712

Cretaceous Bivalves and Alcide d’Orbigny

713

Cretaceous bivalves from Ecuador and northern Peru

714

Cretaceous black shales in the Upper Magdalena Valley, Colombia. New organic geochemical results (part II)

715

Cretaceous calcareous nannofossils from Pelotas Basin, Brazil: Biostratigraphic and paleoecological inferences

716

CRETACEOUS CARBONATES IN THE ADIYAMAN REGION, SE TURKEY: AN ASSESSMENT OF BURIAL HISTORY AND SOURCE-ROCK POTENTIAL

717

Cretaceous climate oscillations in the southern palaeolatitudes: New stable isotope evidence from India and Madagascar

718

Cretaceous climate, volcanism, impacts, and biotic effects

719

Cretaceous Collembola (Arthropoda, Hexapoda) from the Upper Cretaceous of Canada

720

Cretaceous conchostracans from Potiguar Basin (northeast Brazil): relationships with West African conchostracan faunas and palaeoecological inferences

721

Cretaceous conifers and angiosperms from the Bonarelli Level; Reassessment of Massalongoʹs plant fossil collections of “Monte Colle”, Lessini Mountains, northern Italy

722

Cretaceous epithermal gold–silver mineralization and geodynamic environment, Korea

723

Cretaceous eustasy revisited

724

Cretaceous evolution in the Norwegian Sea—a period characterized by tectonic quiescence

725

Cretaceous extension of the Ganhang Tectonic Belt, southeastern China: constraints from geochemistry of volcanic rocks

726

Cretaceous fluvial strata in the Moose River Basin of Ontario, Canada, as a source of kaolin for paper and ceramic industries

727

Cretaceous foraminifera from the Turonian succession at Beer, southeastern Devon, England

728

Cretaceous Gross Spitzkoppe and Klein Spitzkoppe stocks in Namibia: Topaz-bearing A-type granites related to continental rifting and mantle plume

729

Cretaceous isochron ages from K–Ar and 40Ar / 39Ar dating of eclogitic rocks in the Tso Morari Complex, western Himalaya, India

730

Cretaceous length of day perturbation by mantle avalanche

731

Cretaceous marine reptiles of Australia: a review of taxonomy and distribution

732

Cretaceous methane-seep deposits from New Zealand and their fauna

733

Cretaceous oceanic anoxic events and radially elongated chambered planktonic foraminifera: Paleoecological and paleoceanographic implications

734

Cretaceous oceanic red beds (CORBs): Different time scales and models of origin

735

Cretaceous oceanic red beds and land–ocean interaction

736

Cretaceous palaeogeography of southern Gondwana from the distribution of the marine ostracod Majungaella Grekoff: New data and review

737

Cretaceous palaeogeography of the North-Eastern Peri-Tethys

738

Cretaceous paleogeography and paleoclimate and the setting of SKI borehole sites in Songliao Basin, northeast China

739

Cretaceous paleomagnetic apparent polar wander path for the Pacific plate calculated from Deep Sea Drilling Project and Ocean Drilling Program basalt cores

740

Cretaceous paleomagnetism of the eastern South China Block: establishment of the stable body of SCB

741

Cretaceous pCO2 estimation from stomatal frequency analysis of gymnosperm leaves of Patagonia, Argentina

742

Cretaceous Pelagic Red Beds and Black Shales (Aptian-Santonian), NW Turkey: Global Oceanic Anoxic and Oxic Events

743

Cretaceous Phytogeoprovinces and Paleoclimates in East Coast Basins of India

744

Cretaceous potassic intrusives with affinities to aillikites from Jharia area: Magmatic expression of metasomatically veined and thinned lithospheric mantle beneath Singhbhum Craton, Eastern India

745

Cretaceous reconstructions of East Antarctica, Africa and Madagascar

746

Cretaceous reconstructions of East Antarctica, Africa and Madagascar

747

Cretaceous rift related magmatism in central-western South America

748

Cretaceous separation of Africa and South America: the view from the West African margin (ODP Leg 159)

749

CRETACEOUS SOURCE ROCKS AT THE ABU GHARADIG OIL- AND GASFIELD, NORTHERN WESTERN DESERT, EGYPT

750

CRETACEOUS SOURCE ROCKS AT THE ABU GHARADIG OIL- AND GASFIELD, NORTHERN WESTERN DESERT, EGYPT

751

Cretaceous stratigraphy of northeast China: non-marine and marine correlation

752

Cretaceous Stratigraphy-An Update

753

Cretaceous tectonic evolution of South China: A preliminary synthesis

754

Cretaceous terrestrial beds from the Neuquén Basin (Argentina) and their tetrapod assemblages

755

Cretaceous terrestrial biotas of East Asia, with special reference to dinosaur-dominated ichnofaunas: towards a synthesis

756

Cretaceous tetrapod fossil record sampling and faunal turnover: Implications for biogeography and the rise of modern clades

757

Cretaceous thermo-chemical modification of the Kaapvaal cratonic lithosphere, South Africa

758

Cretaceous to Eocene evolution of the southeastern Canadian Cordillera: Continuity of Rocky Mountain thrust systems with zones of “in-sequence” mid-crustal flow

759

CRETACEOUS TO MIOCENE PALAEOGEOGRAPHIC EVOLUTION OF TURKEY: IMPLICATIONS FOR HYDROCARBON POTENTIAL

760

Cretaceous to Paleocene depositional history of North-Pacific subduction zone: reconstruction from the Nemuro Group, eastern Hokkaido, northern Japan

761

Cretaceous transformation from passive to active continental margin in the Western Carpathians as indicated by the sedimentary record in the Infratatric unit

762

Cretaceous volcanic rocks of the South Tethyan suture zone, Pakistan: implications for the Réunion hotspot and Deccan Traps

763

Cretaceous wildfires and their impact on the Earth system

764

Cretaceous/Paleogene boundary bathyal paleo-environments in the central North Pacific (DSDP Site 465), the Northwestern Atlantic (ODP Site 1049), the Gulf of Mexico and the Tethys: The benthic foraminiferal record

765

Cretaceous–Paleogene basaltic rocks of the Tuyon basin, NW China and the Kyrgyz Tian Shan: the trace of a small plume

766

Cretaceous–Paleogene boundary events

767

Cretaceous–Paleogene boundary exposed: Campeche Escarpment, Gulf of Mexico

768

Cretaceous-Paleogene transition at the Paraيba Basin, Northeastern, Brazil: Carbon-isotope and mercury subsurface stratigraphies

769

Cretaceous–Tertiary boundary ostracodes from the Poty quarry, Pernambuco, northeastern Brazil

770

Cretaceous–Tertiary boundary problem on shallow carbonate platform: Carbon and oxygen excursions, biota and microfacies at the K/T boundary sections Dolenja Vas and Sopada in SW Slovenia, Adria CP

771

Cretaceous-Tertiary Foraminifera and Palynomorphs from Djega Section and Inferred Paleodepositional Environments, Rio Del Rey Basin, Cameroon, West Africa

772

Cretaceous–Tertiary inversion history of the Dampier Sub-basin, northwest Australia: Insights from quantitative basin modelling

773

Cretaceous–Tertiary structures and kinematics of the Serbomacedonian metamorphic rocks and their relation to the exhumation of the Hellenic hinterland (Macedonia, Greece)

774

Cretaceous-Tertiary tectonic inversion of the Cotiella Basin (southern Pyrenees, Spain)

775

Creutzfeldt-Jacob Disease in an Iranian Patient Confirmed By Brain Autopsy

776

Creutzfeldt-Jacob disease: a case report.

777

Creutzfeldt-Jak ob disease in French West Indies

778

Creutzfeldt-Jakob disease

779

Creutzfeldt-Jakob disease

780

Creutzfeldt-Jakob disease

781

Creutzfeldt-Jakob Disease after Dental Procedure along with the Initial Manifestations of Psychiatric Disorder: A Case Report

782

Creutzfeldt-Jakob Disease and eating squirrel brains

783

Creutzfeldt-Jakob disease and non-convulsive status epilepticus: a clinical and electroencephalographic follow-up study

784

Creutzfeldt-Jakob disease in a 52-year-old woman with florid plaques

785

Creutzfeldt-Jakob disease in a beef farmer

786

Creutzfeldt-Jakob disease in a dairy farmer

787

Creutzfeldt-Jakob disease in Europe

788

Creutzfeldt-Jakob Disease Operating Room Protocols: Turning Published Recommendations into Reality

789

Creutzfeldt-Jakob Disease Presenting with Confusion and Visual Disturbance

790

Creutzfeldt-Jakob disease with florid plaques after cadaveric dural graft in a Japanese woman

791

Creutzfeldt-Jakob disease: A case report

792

Creutzfeldt-Jakob Disease: A Systems Approach in a Community Acute-Care Teaching Hospital

793

Creutzfelt–Jakob disease presenting hyperparathyroidism

794

Crevassing and capture by floodplain drains as a cause of partial avulsion and anastomosis (lower Rio Pastaza, Peru)

795

Crevice corrosion behavior of high-alloy stainless steelsin a SWRO pilot plant Original Research Article

796

Crevice corrosion of 316l caused by chloride partition in water-butanone mixtures

797

Crevice corrosion of copper alloys by optical interferometry

798

Crevice Corrosion of K60 in Dry Desertification Saline Soil Original Research Article

799

Crevice-type caves as initial forms of rock landslide development in the Flysch Carpathians

800

Crevicular and serum levels of monocyte chemoattractant protein-4 and high-sensitivity C-reactive protein in periodontal health and disease

801

Crevicular fluid levels of plasma glutathione peroxidase (eGPx) in periodontal health and disease

802

Crevicular fluid levels of TGFβ1 in drug-induced gingival overgrowth

803

Crew pairing at Air France

804

Crew Resource Management training for offshore oil production teams

805

Crew resource management: The relationships between personality types and crew resource management attitudes of pilots

806

Crew scheduling of light rail transit in Hong Kong: from modeling to implementation

807

Crew study of seafarers: a methodological approach to the global labour market for seafarers

808

Crewmanʹs associate (CA) cognitive decision aiding (CDA) applications for the U.S. Armyʹs future main battle tanks

809

CREWS-SAVRE: Scenarios for Acquiring and Validating Requirements

810

Crex et analyse Orion en radiothérapie : vers une mutualisation des actions correctives

811

CRF Ligands via suzuki and negishi couplings of 3-pyridyl boronic acids or halides with 2-benzyloxy-4-chloro-3-nitropyridine

812

CRF1 Not Glucocorticoid Receptors Mediate Prepulse Inhibition Deficits in Mice Overexpressing CRF

813

CRFA-CRBM: a hybrid technique for anomaly recognition in regional geochemical exploration; case study: Dehsalm area, east of Iran

814

CRF-Based Model for Instrument Detection and Pose Estimation in Retinal Microsurgery

815

Cr-Fe-S (Chromium-Iron-Sulfur)

816

CRFP contribution to shear capacity of strengthened RC beams

817

Cr-free Fe-based metal oxide catalysts for high temperature water gas shift reaction of fuel processor using LPG

818

CRH challenge test in anxious depression

819

CRH-induced Electrical Activity and Calcium Signalling in Pituitary Corticotrophs

820

CRH-like peptides protect cardiac myocytes from lethal ischaemic injury

821

CRHR1 Receptor binding and lipophilicity of pyrrolopyrimidines, potential nonpeptide corticotropin-releasing hormone type 1 receptor antagonists Original Research Article

822

Cri du Chat Syndrome: a Case Report with Recurrent Pneumonia and Chronic Stridor

823

Cri du Chat Syndrome: a Case Report with Recurrent Pneumonia and Chronic Stridor

824

Cria alpaca body weight and perinatal survival in relation to age of the dam

825

CRIB and impairment after neonatal intensive care

826

Crib death. Sudden Unexplained Death of Infants: the pathologistʹs viewpoint, G Ottaviani. Springer, Milano (2007)

827

Crib death: further support for the concept of fatal cardiac electrical instability as the final common pathway

828

CRIB II: an update of the clinical risk index for babies score

829

Cribiform-morular variant of papillary thyroid carcinoma and familial adenomatous polyposis: report of a case and literature review

830

Cribrarione A, a new antimicrobial naphthoquinone pigment from a myxomycete Cribraria purpurea

831

Cribriform Atrial Septal Aneurysm

832

Cribriform-Morular Variant of a Papillary Carcinoma: A Case Report

833

Cricetodontini from the Calatayud–Daroca Basin (Spain): A taxonomical description and update of their stratigraphical distributions

834

C-rich sandy Ap horizons of specific historical land-use contain large fractions of refractory organic matter

835

C-rich sandy Ap horizons of specific historical land-use contain large fractions of refractory organic matter

836

Crick’s Notion of Genetic Information and the ‘Central Dogma’ of Molecular Biology

837

Cricket at the speed of light

838

Cricket at the speed of light

839

Cricket at the speed of light

840

Crickets groom to avoid lethal parasitoids

841

Crickets in space: morphological, physiological and behavioral alterations induced by space flight and hypergravity Original Research Article

842

Cricoid Pressure for the Medical Student

843

Cricoid Pressure in Emergency Department Rapid Sequence Tracheal Intubations: A Risk-Benefit Analysis

844

Cricoid ring integrity: Implications for cricothyrotomy

845

Criconematidae (Nematoda: Tylenchida) from the New Zealand region: genera Ogma Southern, 1914 and Blandicephalanema Mehta & Raski, 1971

846

Cricopharyngeal sphincter muscle responses to transcranial magnetic stimulation in normal subjects and in patients with dysphagia

847

Cricothyroid activity in high and low vowels: exploring the automaticity of intrinsic F0

848

CRICOTHYROID APPROXIMATION USING A SILASTIC SHEATH: A NEW APPROACH

849

Cricothyroid Joint Abnormalities in Patients With Rheumatoid Arthritis

850

Crigler-Najjar syndrome type II in a caucasian patient resulting from two mutations in the bilirubin uridine 5′-diphosphate-glucuronosyltransferase (UGT1A1) gene

851

CrIII(salen) catalysed asymmetric ring opening of monocyclic terpene-epoxides

852

CrIII(salen) impregnated on silica for asymmetric ring opening reactions and its recovery via desorption/re-impregnation

853

CrIII(salen)Cl Catalyzed Asymmetric Epoxidations: Insight into the Catalytic Cycle

854

CRIM: Conditional Remapping to Improve the Reliability of Solid-State Drives with Minimizing Lifetime Loss

855

Crim1 inhibits angiotensin II-induced hypertrophy and preserves Kv4.2 expression in cardiomyocytes

856

Crime and criminal justice in modern Japan: From re-integrative shaming to popular punitivism

857

Crime and ethics

858

Crime and Housing in Malaysia: Case Study of Taman Melati Terrace Housing in Kuala Lumpur

859

Crime and Its Social Context: Towards an Integrated Theory of Offenders, Victims and Situations

860

Crime and its solutions in Barbados

861

Crime and law enforcement in the global village : Edited by William F. McDonald Academy of Criminal Justice Sciences/Anderson Publishing Co. (P.O. Box 1576, Cincinnati, Ohio 45201-1576), 1997, 245 pp., softcover—$23.95

862

Crime and local inequality in South Africa

863

Crime and Malaysia’s development agenda: An overview

864

Crime and mental disorders among native Dutch and ethnic minority juvenile defendants in the Netherlands

865

Crime and modernity: continuities in left realist criminology: John Lea; Sage, London, 2002, pp. 224, price £60 hardback, £17.99 paperback The culture of control: crime and social order in contemporary society David Garland; Oxford University Press, Oxfor

866

Crime and morality: the significance of criminal justice in post – 2 modern culture: Hans Boutellier; Kluwer Academic, Dordrecht, xii+181 pp., $115 hardback

867

Crime and offence prevention model in public institutions

868

Crime and Power: A History of Criminal Justice 1688–1998: Philip Rawlings; Addison, Wesley, Longman Ltd, England, 1999, 212 pages, softcover, ISBN 0582-30401-6.

869

Crime and punishment: Distinguishing the roles of causal and intentional analyses in moral judgment

870

Crime and punishment: Does it pay to punish?

871

Crime and Punishment: Inside Views: Edited by Robert Johnson & Hans Toch. Los Angeles: Roxbury, 2000. 245 pp., ISBN: 1-891487-16-7. $28.95 (paper).

872

Crime and religion: An international comparison among thirteen industrial nations

873

Crime and segregation

874

Crime and social interactions: a developing country case study

875

Crime and the city: Domestic burglary and the built environment in Tehran

876

Crime and the Timing of Work

877

Crime classification manual: A standard system for investigating and classifying violent crimes

878

Crime control and harassment of the innocent

879

Crime Hotspot detection using spatial Clustering: A literature review of related work

880

Crime in Italy at the time of the pandemic

881

Crime induced poverty traps

882

Crime Mapping and the Crimestat Program

883

Crime of Baby Dumping: A Review of Islamic, Malaysian and Nigerian Laws

884

crime of illegal fishing in indonesian exclusive economic zone in the perspective of economic crime

885

Crime of Rape in the Ottoman Law

886

CRIME OFFENDER WITH MENTAL RETARDATION: A CASE REPORT

887

Crime on campus: Legal issues and campus administration : by Michael Clay Smith & W. Richard Fossey. Phoenix, AZ: American Council on Education and The Oryx Press, 1995. 264p. $34.95. ISBN 0-89774-846-8

888

Crime prevention and the attitude toward the criminal justice system: The effects of a multimedia campaign

889

Crime Prevention in Scotland

890

Crime Rates and Criminal Justice Policies in the Advent of COVID-19 Pandemic: Some Criminological Issues

891

Crime reduction outcomes associated with the State Criminal Alien Assistance Program

892

Crime Scene Investigation Approach to Sudden Cardiac Death

893

CRIME SCENE INVESTIGATION THROUGH DNA TRACES USING BAYESIAN DEVICES1

894

Crime Scene Representation (2D, 3D, Stereoscop Projection) and Classification

895

Crime trends and the effect of mandated drug treatment: Evidence from Californiaʹs Substance Abuse and Crime Prevention Act

896

Crime victimization, alcohol consumption, and drug use in Canadian public housing

897

Crime victimization: its extent and communication

898

Crime, coordination, and punishment: An economic analysis

899

Crime, fraud and deceit on the internet: is there hyperreality in cyberspace?

900

Crime, neighborhood perceptions, and the underclass: The relationship between fear of crime and class position

901

Crime, Public Opinion, and Civil Liberties? The Tolerant Public: By Shmuel Lock. Published 1999 by Praeger Publishers. ISBN: 0-275-96432-9 (hardcover). 280 pp. Price $59.95

902

Crime, punishment, and background risks

903

Crime: social disorganization and relative deprivation

904

Crimean congo hemorrhagic fever appearance in the north of Iran

905

Crimean Congo hemorrhagic fever: a brief report regarding kidney involvement

906

Crimean Congo-Haemorrhagic Fever treated with oral ribavirin

907

Crimean-Congo haemorrhagic fever in Oman

908

Crimean-Congo haemorrhagic fever in Oman

909

Crimean-Congo Haemorrhagic Fever in Persian Traditional Medicine

910

Crimean-Congo Haemorrhagic Fever in Persian Traditional Medicine

911

Crimean–Congo haemorrhagic fever outbreak investigation in the Western Region of Afghanistan in 2008

912

Crimean-Congo haemorrhagic fever virus: sequence analysis of the small RNA segments from a collection of viruses world wide

913

Crimean-Congo Hemorrhagic Fever

914

Crimean-Congo Hemorrhagic Fever

915

Crimean-Congo Hemorrhagic Fever

916

Crimean-Congo Hemorrhagic Fever and Hypertention: A Case Report

917

Crimean-Congo hemorrhagic fever cases in the eastern BlackSea Region of Turkey: demographic, geographic, climatic,and clinical characteristics

918

Crimean-Congo hemorrhagic fever following consumption of uncooked liver: case series study

919

Crimean-Congo Hemorrhagic Fever in Dubai, United Arab Emirates, 2010: Case Report

920

Crimean-Congo Hemorrhagic Fever in the One-Humped Camel (Camelus dromedarius) in East and Northeast of Iran

921

Crimean-Congo Hemorrhagic Fever Virus Gn Bioinformatic Analysis and Construction of a Recombinant Bacmid in Order to Express Gn by Baculovirus Expression System

922

Crimean-Congo hemorrhagic fever, transfer patterns, vectors and history in Iran and neighboring countries

923

Crimean-Congo Hemorrhagic Fever: A Reemerging Disease

924

CRIMEAN-CONGO HEMORRHAGIC FEVER: AN EMERGING DILEMMA IN PAKISTAN

925

Crimean-congo hemorrhagic fever: treatment and control strategy in admitted patients

926

Crimean-Congo Hemorrhagic Fever-Treatment and Preventive Strategies

927

Crimean-Congo Hemorrhagic Fever-Treatment and Preventive Strategies

928

Crime-minimizing drug policy

929

Crime-Related Trauma: Psychological Distress in Victims of Bankrobbery

930

Crimes Against Humanity and Genocide : The Plight of Rohingya Muslims and Iran s Stance

931

Crimes analysis software: ‘pins in maps’, clustering and Bayes net prediction

932

Crimes and misdemeanours: the death of Arthur Andersen

933

Crimes and the Bell curve: The role of people with high, average, and low intelligence

934

Crimes in the Straits Settlements before World War II

935

Crimes of the Big Four motorcycle gangs

936

CrimeSPOT: A language and runtime for developing active wireless sensor network applications

937

Criminal ‘organisations’ in Greece and public policy: from non-real to hyper-real?

938

criminal accountability of government officials based on discretion authorities in the perspective of the indonesian welfare law state

939

CRIMINAL ACHIEVEMENT, OFFENDER NETWORKS AND THE BENEFITS OF LOW SELF-CONTROL

940

Criminal Activity and Assault-Type Handguns: A Study of Young Adults, , ,

941

Criminal and alcohol problems among Swedish drunk drivers — Predictors of DUI relapse

942

Criminal behavior in general equilibrium: Who benefits from crime?

943

Criminal behaviour and violent crimes in former inpatients with affective disorder

944

Criminal Behaviour Associated with a Novel Mutation inthe VPS13A-Gene Causing Chorea-Acanthocytosis

945

Criminal career progression among serious youthful offenders in Australia

946

Criminal charges against Bosnian Serb doctors

947

Criminal consequences of commotio cordis

948

Criminal consequences of commotio cordis

949

criminal consequences of commotio cordis: Reply

950

Criminal deterrence as a public health strategy

951

Criminal epidemiology and the immigrant paradox: Intergenerational discontinuity in violence and antisocial behavior among immigrants

952

criminal execution of special minimum amercement sanctions in law of the republic of indonesia number 35 of 2009 concerning narcotics (case in jurisdiction of the dharmasraya state prosecutor s office jurisdiction)

953

Criminal Identification And Comprehensive Analysis Using Deep Learning: A Review

954

Criminal incident prediction using a point-pattern-based density model

955

Criminal insanity in 19th-century Ireland, Europe and the United States: Cases, contexts and controversies

956

Criminal investigation of child sexual abuse: a comparison of cases referred to the prosecutor to those not referred

957

Criminal justice and ethical ideology: an exploration of a loyalty-truthfulness dilemma

958

Criminal justice in the Middle East

959

Criminal justice institutions as a common pool: the 19th century analysis of Edwin Chadwick

960

Criminal justice involvement and service need among men on methadone who have perpetrated intimate partner violence

961

Criminal justice outcomes of prosecution of child sexual abuse: A case flow analysis,

962

Criminal justice pioneers: A content analysis of biographical data

963

Criminal Justice System in Brazil: Functions of a forensic psychiatrist

964

Criminal justice: Portrait of a discipline in process

965

Criminal Law and Tax Compliance in Argentina: Testing the Limits of Deterrence

966

Criminal Law of Women in Qajar Era Namely in Naser-ad-Din Shah Era (1264-1313)

967

Criminal Liability Arising From Medical Staff’s Negligence in Abortion

968

Criminal Liability for Breach of Fiduciary Duty: A Case of Criminal Breach of Trust by the Personal Representative of the Deceased’s Estate

969

criminal liability in the land procurement corruption iain imam bonjol padang year 2010 (study of decision no. 26 / pid.sus / tpk / 2016 / pn / pdg)

970

Criminal Lunacy in Early Modern England: Did Gender Make a Difference?

971

972

Criminal Offenses Among Discharged Mentally Ill Individuals: Determinants of the Duration from Discharge and Absence of Diagnostic Specificity

973

criminal poisoning: a hospital-based survey in an academic center of iran

974

Criminal prosecution of child sexual abuse cases

975

CRIMINAL PROSECUTION OF DOCTORS IN INDONESIA: ISSUES AND PROBLEMS

976

Criminal Responsibility of Village Chief in Approving Indigenous Inheritance Necessity Certificate

977

Criminal responsibility, “fleeting” states of mental impairment, and the power of self-control

978

Criminal science in a global society: Essays in honor of Gerhard O. W. Mueller : Edited by Edward M. Wise Fred B. Rothman & Co. (10368 West Centennial Road, Littleton, Colorado 80127), 1994, 288 pp., hardcover — $57.50

979

Criminal Sociology of Prison Population with Emphasis on Iran's Penal policy Evaluation

980

Criminal solicitation, entrapment, and the enforcement of law

981

Criminal Victimization and the Reporting of Crime in Kaduna State: Towards Integrating the Victim of Crime into Criminological Discourse

982

Criminal victimization in South Korea: A multilevel approach

983

Criminal victimization in the developing world : Edited by Ugljesa Zvekic and Anna Alvazzi Del Frate United Nations Interregional Crime and Justice Research Institute (via Giulia 52, 00186 Rome, Italy), 1995, 434 pp., softcover — $40.00

984

Criminalisation of Misappropriation of Traditional Cultural Expression TCE

985

Criminality and violence among the mentally disordered: the Stockholm Metropolitan project: Sheilagh Hodgins and Carl-Gunnar Janson; Cambridge University Press, Cambridge, 2002, pp. 228, Price £40.00

986

Criminality in the offspring of antenatally depressed mothers: a 33-year follow-up of the Northern Finland 1966 Birth Cohort

987

Criminality of the mentally ill in sheltered care : Are they more dangerous?

988

criminalizing female genital mutilation in some islamic countries including iran

989

CRIMINOLOGICAL KNOWLEDGE: PERIOD AND COHORT EFFECTS IN SCHOLARSHIP

990

Criminological scholarship and race: A rejoinder from Professors Ross and Edwards

991

Criminological scholarship and race: A response to Professors Ross and Edwards

992

Criminological Study of Personality-Based Crimes in Cyberspace; from Typology to Policy Strategies

993

Criminological theory in the digital age: The case of social learning theory and digital piracy

994

Criminology and justice : by Lydia Voigt, William E. Thornton, Jr., Leo Barrile, and Jerrol M. Seaman McGraw-Hill (Princeton Road, Hightstown, New Jersey 08520), 1994, 692 pp., hardcover — $44.00

995

Criminology: Explaining crime and its context, second edition : Edited by Stephen E. Brown, Finn-Aage Esbensen, and Gilbert Geis Anderson Publishing Company (P.O. Box 1576, Cincinnati, Ohio 45201-1576), 1995, 560 pp., softcover — $39.95

996

Crimmins, Gonzales and Moore

997

Crimped polymer nanofibres by air-driven electrospinning

998

Crinatusins, Bioactive Diels–Alder Adducts from Cyathocalyx crinatus

999

Cr-Inclination Theorems for Singularly Perturbed Equations

1000

Crinoid biofacies in Upper Carboniferous cyclothems, midcontinent North America: faunal tracking and the role of regional processes in biofacies recurrence

بازگشت