<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modelling of gas clathrate hydrate equilibria using the electrolyte non-random two-liquid (eNRTL) model
2
Modelling of gas entrainment from Taylor bubbles. Part A: Slug flow
3
Modelling of gas entrainment from Taylor bubbles. Part B: A stationary bubble
4
Modelling of Gas Metal Arc Welding Process on Angular Distortion of T Joint
5
Modelling of gas permeability for membranes prepared by PECVD
6
Modelling of gas permeation through ceramic coatings produced by thermal spraying Original Research Article
7
Modelling of gas pressure effects on anaerobic digestion
8
Modelling of gas transport phenomena in SOFC anodes
9
Modelling of gas transport properties of polymer electrolytes containing various amounts of water
10
Modelling of gas–liquid reactors — implementation of the penetration model in dynamic modelling of gas–liquid processes with the presence of a liquid bulk
11
Modelling of Gas-Liquid/Gas-Liquid-Solid Flows in Bubble Columns: Experiments and CFD Simulations
12
Modelling of gearbox dynamics under time-varying nonstationary load for distributed fault detection and diagnosis
13
Modelling of geochemical and isotopic changes in a column experiment for degradation of TCE by zero-valent iron
14
Modelling of geochemical reactions and experimental cation exchange in MX80 bentonite
15
Modelling of Glow Discharge Optical Emission Spectroscopy depth profiles of metal (Cr,Ti) multilayer coatings
16
Modelling of Glow Discharge Optical Emission Spectroscopy depth profiles of metal (Cr,Ti) multilayer coatings
17
Modelling of gold (I) cyanide adsorption based on the properties of activated bagasse
18
Modelling of grain boundary resistivities of n-conducting BaTiO3 ceramics
19
Modelling of grain face bubbles coalescence in irradiated UO2 fuel
20
Modelling of grain size transition with alloy concentration in solidified Al–Si alloys
21
Modelling of granular mixtures placing. Comparison between a 3D full-digital model and a 3D semi-digital model
22
Modelling of granule formation process of powdered materials by the method of rolling
23
Modelling of grate combustion in a medium scale biomass furnace for control purposes
24
Modelling of grazing incidence X-ray diffraction spectra from Mo-implanted stainless steel: Comparison with experimental data
25
Modelling of Greenhouse Gas Emissions from Wheat Production in Irrigated and Rain-Fed Systems in Khorasan Razavi Province, Iran
26
Modelling of grinding gap macro geometry and workpiece kinematics in throughfeed centreless grinding
27
Modelling of ground acceleration in the near source range: the case of 1976, Friuli earthquake (M = 6.5), northern Italy
28
Modelling of groundwater–vegetation interactions in a tidal marsh
29
Modelling of growth of aflatoxigenic A. flavus isolates from red chilli powder as a function of water availability
30
Modelling of growth of thin solid ®lms obtained by pulsed laser deposition
31
Modelling of growth of three-dimensional cracks by a continuous distribution of dislocation loops
32
Modelling of growth, growth/no-growth interface and nonthermal inactivation areas of Listeria in foods
33
Modelling of H1N1 Flu in Iran
34
Modelling of H2/D2 exchange over Pd
35
Modelling of halomethanes using neural networks
36
Modelling of hard part machining
37
Modelling of hardening due to grain growth for a superplastic alloy
38
Modelling of haze and cloud chemistry: comparison of different model approaches
39
Modelling of heat and mass transfer during (osmo) dehydrofreezing of fruits Original Research Article
40
Modelling of heat and mass transfer in a horizontal-tube falling-film condenser for brackish water desalination in remote areas Original Research Article
41
Modelling of heat and mass transfer in a tunnel dryer
42
Modelling of heat and mass transfer inside a traditional oasis: Experimental validation
43
Modelling of heat and mass transfer inside a traditional oasis: Experimental validation
44
Modelling of heat and mass transfer processes during core melt discharge from a reactor pressure vessel Original Research Article
45
Modelling of heat and moisture transfer in buildings: I. Model program
46
Modelling of heat and moisture transfer in buildings: II. Applications to indoor thermal and moisture control
47
Modelling of heat and moisture transfer in desiccant packed bed utilizing spherical particles of clay impregnated with CaCl2
48
Modelling of heat conduction and phase transformations during sliding of railway wheels
49
Modelling of heat deposition onto the Tore Supra toroidal pumped limiter
50
Modelling of heat transfer and hydrodynamic with two kinetics approaches during supercritical water oxidation process
51
Modelling of heat transfer at glass/mould interface in press and blow forming processes
52
Modelling of heat transfer in a laminar flow through a helical pipe
53
Modelling of heat transfer in an infiltrated granular bed in view of the difference of phase temperatures
54
Modelling of heat transport in magnetised plasmas using non-aligned coordinates
55
Modelling of heat, mass and charge transfer in a PEMFC single cell
56
Modelling of heating and evaporation of gasoline fuel droplets: A comparative analysis of approximations
57
Modelling of heavy and buoyant particle dispersion in a two-dimensional turbulent mixing layer
58
Modelling of heavy metal adsorption into activated carbon from apricot stones in fluidized bed
59
Modelling of heavy metals adsorption to a chelating resin in a fluidized bed reactor
60
Modelling of helium-mediated quench propagation in the LHC prototype test string-1 Original Research Article
61
Modelling of heterogeneities inside polymer electrolyte fuel cells due to oxidants
62
Modelling of heterogeneous precipitate distribution evolution during friction stir welding process Original Research Article
63
Modelling of hexadecane degradation in continuousflow cultures
64
Modelling of hexadecane degradation in continuous-flow cultures
65
Modelling of high quality pasta drying: mathematical model and validation Original Research Article
66
Modelling of high quality pasta drying: quality indices and industrial application Original Research Article
67
Modelling of High Quantum Efficiency Avalanche Photodiode
68
Modelling of high temperature asymmetric creep behavior of ceramics
69
Modelling of high temperature fatigue crack growth in Inconel 718 under hold time conditions
70
Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Superalloys Original Research Article
71
Modelling of high velocity, loose abrasive machining processes
72
Modelling of high-aspect ratio microdrilling of polymers with UV laser ablation
73
Modelling of high-chromia refractory spalling in slagging coal gasifiers
74
Modelling of highly-heterogeneous media using a flux-vector-based Green element method
75
Modelling of high-pressure dense diesel sprays with adaptive local grid refinement
76
Modelling of high-pressure phase equilibria using the Sako–Wu–Prausnitz equation of state: I. Pure-components and heavy n-alkane solutions
77
Modelling of high-pressure phase equilibria using the Sako–Wu–Prausnitz equation of state: II. Vapour–liquid equilibria and liquid–liquid equilibria in polyolefin systems
78
Modelling of historical masonry structures: comparison of different approaches through a case study
79
Modelling of hot carrier solar cell absorbers
80
Modelling of hot cracking in welding with a cellular automaton combined with an intergranular fluid flow model
81
Modelling of hot strip rolling process using a hybrid neural network approach
82
Modelling of HTRs with Monte Carlo: from a homogeneous to an exact heterogeneous core with microparticles
83
Modelling of human decision-making in simulation models of conflict using experimental gaming
84
Modelling of HVDC transmission systems in the harmonic domain
85
Modelling of HVDC wall bushing flashover due to uneven wetting
86
Modelling of hydrocyclone performance based on spray profile analysis
87
Modelling of hydrodesulfurization catalysts II. Effects of catalyst pore structures on deactivation by metal deposits
88
Modelling of hydrodesulfurization catalysts: II. Effects of catalyst pore structures on deactivation by metal deposits
89
Modelling of hydrodispersive processes in the fissured media by flux limiters schemes (Chalk aquifer, France)
90
Modelling of hydrodynamics and cohesive sediment transport in Tanshui River estuarine system, Taiwan
91
Modelling of hydrodynamics in a type I turbulent bed contactor
92
Modelling of hydrogen and oxygen isotope compositions for local precipitation
93
Modelling of hydrogen diffusion and hydrogen induced cracking in supermartensitic and duplex stainless steels
94
Modelling of hydrogen infrastructure for vehicle refuelling in London
95
Modelling of hydrogen isotope retention in the tungsten divertor of EAST during ELMy H-mode
96
Modelling of hydrogen perm-selective membrane reactors for catalytic methane steam reforming
97
Modelling of hydrogen production in batch cultures of the photosynthetic bacterium Rhodobacter capsulatus
98
Modelling of hydrogen transport through plasma facing materials by use of cellular automaton Original Research Article
99
Modelling of hydrological response to climate change in glacierized Central Asian catchments
100
Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation Original Research Article
101
Modelling of Hysteresis in Vibration Control Systems by means of the Bouc-Wen Model
102
Modelling of hysteresis influence on mass transfer in building materials
103
Modelling of hysteresis using Masing–Bouc-Wen’s framework and search of conditions for the chaotic responses
104
Modelling of icecap glaciation of the northern Rocky Mountains of Montana
105
Modelling of icosahedral viruses
106
Modelling of impact damage and dynamics in fibre-metal laminates – A review
107
Modelling of impact forces and pressures in Lagrangian bird strike analyses
108
Modelling of impervious layers from measurements of the sound reduction index
109
Modelling of impingement phenomena for molten metallic droplets with low to high velocities
110
Modelling of impurity pellet ablation in ASDEX Upgrade (neon) and Wendelstein W7-AS (carbon) by means of a radiative (`killer) pellet code
111
Modelling of income distribution in the European Union with the Fokker–Planck equation
112
Modelling of incremental rock breakage by impact – For use in DEM models
113
Modelling of indoor exposure to nitrogen dioxide in the UK
114
Modelling of in-duct desulfurization reactors
115
Modelling of induction machines with skewed rotor slots
116
Modelling of inductively coupled multi-component plasmas
117
Modelling of inelastic bending of a metal sheet with thermal coupling
118
Modelling of inelastic bending of a metal sheet with thermal coupling
119
Modelling of inelastic bending of a metal sheet with thermal coupling
120
Modelling of inextensible cable dynamics with experiments
121
Modelling of infrared heating of thermoplastic sheet used in thermoforming process
122
Modelling of inherent anisotropy in sedimentary rocks
123
Modelling of initial fatigue crack growth and crack branching under fretting conditions
124
Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al–Ti–B Original Research Article
125
Modelling of instabilities in turbulent swirling flames
126
Modelling of insurers’ rating determinants. An application of machine learning techniques and statistical models
127
Modelling of integrated effect of volumetric heating and magnetic field on tritium transport in a U-bend flow as applied to HCLL blanket concept
128
Modelling of interacting dimer adsorption
129
Modelling of interaction between a spatula and a human brain
130
Modelling of interactive populations of disperse systems
131
Modelling of interfacial fracture
132
Modelling of interfacial fracture
133
Modelling of interfacial viscoplastic slip coupled to damage in a polycrystalline microstructure
134
Modelling of interference fits with taking into account surfaces roughness with homogenization technique
135
Modelling of interference fits with taking into account surfaces roughness with homogenization technique
136
Modelling of interlaminar fracture processes in composites using interface elements
137
Modelling of inter-laminar toughening from chopped Kevlar fibers
138
Modelling of intermittent drying of thin layer rough rice Original Research Article
139
Modelling of internal environmental conditions in a full-scale commercial pig house containing animals
140
Modelling of internal stress distribution and deformation behaviour in the precipitation hardened superalloy SC16
141
Modelling of internal stress distribution and deformation behaviour in the precipitation hardened superalloy SC16
142
Modelling of interparticle breakage
143
Modelling of inter-rivet buckling of hybrid composites
144
Modelling of interstitials in the bcc phase
145
Modelling of interstitials in the bcc phase
146
Modelling of iodine-induced stress corrosion cracking in CANDU fuel
147
Modelling of ionic polymer–metal composites by a multi-field finite element method
148
Modelling of ionic polymer–metal composites by a multi-field finite element method
149
Modelling of iron cycling and its impact on the electron balance at a petroleum hydrocarbon contaminated site in Hnevice, Czech Republic
150
Modelling of island divertor physics and comparison to W7-AS experimental results
151
Modelling of isobaric stages of adsorption cooling cycle: An optimal shape of adsorption isobar
152
Modelling of isothermal and dynamic pyrolysis of plastics considering non-homogeneous temperature distribution and detailed degradation mechanism
153
Modelling of isothermal coupled moisture–ion transport in cementitious materials
154
Modelling of isotope selective infrared multiphoton dissociation in a wave guide reactor
155
Modelling of jack-up response for fatigue under simulated service conditions
156
Modelling of jute production using artificial neural networks
157
Modelling of kinematics of the IRb-6 manipulator
158
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
159
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
160
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
161
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: Numerical solution and application
162
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: Numerical solution and application
163
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: Numerical solution and application
164
Modelling of kinetics of solidification of intermetallic compounds
165
Modelling of kinetics of solidification of intermetallic compounds
166
Modelling of knee joint muscles during the swing phase of gait––a forward dynamics approach using MATLAB/Simulink
167
Modelling of lake mixing induced by air-bubble plumes and the effects on evaporation
168
Modelling of laminar premixed flames by BEM using; different fundamental solutions
169
Modelling of laminated microstructures in stress-induced martensitic transformations
170
Modelling of laminates using a layerwise element with enhanced strains
171
Modelling of land cover and agricultural change in Europe: Combining the CLUE and CAPRI-Spat approaches
172
Modelling of landscape changes derived from the dynamics of socio-ecological systems: A case of study in a semiarid Mediterranean landscape
173
Modelling of lane-changing behaviour integrating with merging effect before a city road bottleneck
174
Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide
175
Modelling of laser forming – An review
176
Modelling of laser produced plasma and time-of-flight experiments in UV laser ablation of aluminium targets
177
Modelling of laser produced plasma and time-of-flight experiments in UV laser ablation of aluminium targets
178
Modelling of laser welding process in the phase of keyhole formation
179
Modelling of laser-material interaction using semi-analytical approach Original Research Article
180
Modelling of layer epitaxial growth: surface morphology and growth mode transitions
181
Modelling of leaching in pure cement paste and mortar
182
Modelling of leaching of chloride and nitrogen species in an experimental citrus grove
183
Modelling of leaching of chloride and nitrogen species in an experimental citrus grove
184
Modelling of length scale effects in viscoelastic materials
185
Modelling of light pollution in suburban areas using remotely sensed imagery and GIS
186
Modelling of Light-driven RuBP Regeneration, Carboxylation and CO2Diffusion for Leaf Photosynthesis
187
Modelling of linear wave propagation in spatial fluid filled pipe systems consisting of elastic curved and straight elements
188
Modelling of liquid circulation velocity in concentric-tube airlift reactors
189
Modelling of liquid crystalline compound fibres
190
Modelling of liquid sloshing with constrained floating baffle
191
Modelling of liquid–liquid equilibria of mixed solvent electrolyte systems using the extended electrolyte NRTL
192
Modelling of liquid-phase oxidation of SO2: lognormal approach and model comparison
193
Modelling of load interaction and overload effect on fatigue damage of steel bridges
194
Modelling of local conditions in flooded lead/acid batteries in photovoltaic systems
195
Modelling of local effects by hybrid-displacement FE
196
Modelling of local two-phase flow parameters in upward subcooled flow boiling at low pressure
197
Modelling of localisation and scale effect in thick-walled cylinders with gradient elastoplasticity
198
Modelling of localization and propagation of phase transformation in superelastic SMA by a gradient nonlocal approach
199
Modelling of location- and time-dependent deformation of chondrocytes during cartilage loading
200
Modelling of long term kinetic evolution: a fruitful relationship between experiment and theoretical development
201
Modelling of long term nitrogen retention in surface waters
202
Modelling of Long Wavelength Detection of Objects Using Elman Network Modified Covariance Combination
203
Modelling of long-term behaviour of caesium and strontium radionuclides in the Arctic environment and human exposure
204
Modelling of long-term diffusion–reaction in a bentonite barrier for radioactive waste confinement
205
Modelling of long-term dynamic leaching tests applied to solidified/stabilised waste
206
Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity
207
Modelling of low-energy galactic electrons in the heliosheath Original Research Article
208
Modelling of low-energy/low-velocity impact on Nomex honeycomb sandwich structures with metallic skins
209
Modelling of machinability parameters of carbon–carbon composite—a response surface approach
210
Modelling of macropore flow and transport processes at catchment scale
211
Modelling of macroscopic magnetic islands in tokamaks
212
Modelling of magnetic field measurements at Mercury
213
Modelling of magnetic field near the magnetopause
214
Modelling of magneto-chiral enantioselective photochemistry Original Research Article
215
Modelling of magnetodensimetric separation in two high gradient magnetic separation axial cells
216
Modelling of Manhattan K-Nearest Neighbor for Exhaust Emission Analysis of CNG-Diesel Engine
217
Modelling of man-made contribution to salinity increase into the Vistula Lagoon (Baltic Sea)
218
Modelling of man-made contribution to salinity increase into the Vistula Lagoon (Baltic Sea)
219
Modelling of mantled porphyroclasts using non-Newtonian rock analogue materials
220
Modelling of Manufacturing Systems Complexity
221
Modelling of manure production by pigs and NH3, N2O and CH4 emissions. Part I: animal excretion and enteric CH4, effect of feeding and performance
222
Modelling of manure production by pigs and NH3, N2O and CH4 emissions. Part II: effect of animal housing, manure storage and treatment practices
223
Modelling of marine currents in Cuban waters: A case study
224
Modelling of masonry infill walls participation in the seismic behaviour of RC buildings using OpenSees
225
Modelling of mass loss of char particles during combustion in flow of inert material
226
Modelling of mass transfer during osmotic dehydration of apples Original Research Article
227
Modelling of mass transfer from multiple emulsions
228
Modelling of mass transfer in facilitated supported liquid membrane transport of copper(II) using MOC-55 TD in Iberfluid
229
Modelling of mass transfer in film flow of shear thinning liquid on a horizontal rotating disk
230
Modelling of mass transfer of volatile organic compounds in polymer dispersions
231
Modelling of material handling operations using controlled traffic
232
Modelling of Material Side Flow in Hard Turning
233
Modelling of materials properties and behaviour critical to casting simulation
234
Modelling of maximum daily water temperatures in a small stream using air temperatures
235
Modelling of maximum temperatures in aerial bundled cables feeding domestic loads using the beta probability distribution function
236
Modelling of Mean Drop Size in a Extraction Spray Column and Developing a New Model
237
Modelling of mechanical system by means of matroids
238
Modelling of mechanical systems vibrations by utilisation of GRAFSIM software
239
Modelling of Mechanical Systems, Vol. 2: Structural Elements, François Axisa, Philippe Trompette. Elsevier Butterworth-Heinemann, Oxford (2005)
240
Modelling of Mediterranean system-changes under climate variations and human impact
241
Modelling of membrane filtration of natural water for potable purposes Original Research Article
242
Modelling of membrane fouling in a submerged membrane bioreactor
243
Modelling of mercury emissions from background soils
244
Modelling of mercury geochemical cycle in Lake Velenje, Slovenia
245
Modelling of mercury transport and transformation processes in the Idrijca and Socˇa river system
246
Modelling of mercury transport and transformations in the water compartment of the Mediterranean Sea
247
Modelling of metal deposition
248
Modelling of metal flow and oxidation during furnace emptying using smoothed particle hydrodynamics
249
Modelling of metal pollutant leaching through a smectite
250
Modelling of metal-binder migration during liquid-phase sintering of graded cemented carbides
251
Modelling of metal–insulator–semiconductor devices featuring a silicon quantum well
252
Modelling of meteorological conditions at an urban scale for the PUMA winter campaign
253
MODELLING OF METEOROLOGICAL PARAMETERS FOR THE PURPOSE OF SIZING OF THE SOLAR PHOTOVOLTAIC IRRIGATION SYSTEMS
254
Modelling of Methylene Blue Adsorption via Activated Carbon Derived from Indigenous Agricultural Solid Waste
255
Modelling of MHS cellular solid in large strains
256
Modelling of MHS cellular solid in large strains
257
Modelling of microbial activity and prediction of shelf life for packed fresh fish
258
Modelling of microbial degradation of pesticides in soils
259
Modelling of microbial metabolism stoichiometry: Application in bioleaching processes
260
Modelling of microcracks initiation and evolution along interfaces of the WC/Co composite by the finite element method
261
Modelling of microhabitat used by fish in natural and regulated flows in the river Garonne (France)
262
Modelling of microhabitat used by fish in natural and regulated flows in the river Garonne (France)
263
Modelling of micropollutant removal in biological wastewater treatments: A review Review Article
264
Modelling of microsegregation and homogenization of 6061 extrudable Al-alloy
265
Modelling of microsegregation in ternary alloys: Application to the solidification of Al–Mg–Si Original Research Article
266
Modelling of microstructural effects in the fatigue of austempered ductile iron
267
Modelling of microstructural effects in the fatigue of austempered ductile iron
268
Modelling of microstructural evolution in multipass hot rolling
269
Modelling of microstructural evolution in thermomechanical processing of structural steels
270
Modelling of microstructural evolution in thermomechanical processing of structural steels
271
Modelling of microstructure and mechanical properties of steel using the artificial neural network
272
Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas
273
Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model
274
Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model
275
Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model
276
Modelling of microstructure evolution in hot forming using unified constitutive equations
277
Modelling of microstructure evolution in peritectic systems
278
Modelling of microstructure formation and interface dynamics
279
Modelling of microwave heating of foodstuff: study on the influence of sample dimensions with a FEM approach Original Research Article
280
Modelling of migration and fate of selected persistent organic pollutants in the Gulf of Gdansk and the Vistula catchment (Poland): selected results from the EU ELOISE EuroCat project
281
Modelling of mixed mode debonding in externally FRP reinforced beams
282
Modelling of mode-I stable crack growth under hydrogen assisted stress corrosion cracking
283
Modelling of modern mercury vapor transport in an ancient hydrothermal system: environmental and geochemical implications
284
Modelling of moisture and thermal transient behaviour of multi-layer non-cavity walls
285
Modelling of moisture diffusion in multilayer woven fabric composites
286
Modelling of moisture diffusion in pores of banana foam mat using a 2-D stochastic pore network: Determination of moisture diffusion coefficient during adsorption process Original Research Article
287
Modelling of moisture-dependent aerobic degradation of solid waste
288
Modelling of molecular light scattering
289
Modelling of morphology evolution and macroscopic behaviour of intercalated PET–clay nanocomposites during semi-solid state processing
290
Modelling of Motion Resistance Ratios of Pneumatic and Rigid Bicycle Wheels
291
Modelling of MPEG-4 encoded VBR video traffic
292
Modelling of Multi-Agent Systems: Experiences with Membrane Computing and Future Challenges
293
Modelling of multi-component gas flows in capillaries and porous solids
294
Modelling of multi-component immunoassay kinetics — A new node-based method for simulation of complex assays Original Research Article
295
Modelling of multicomponent olefins solubility in polyolefins using Sanchez–Lacombe equation of state
296
Modelling of multicomponent salt systems : Application to sea water and brines I. Derivation of the model
297
Modelling of multicomponent salt systems: Application to sea water and brines I. Derivation of the model
298
Modelling of multifrequency IRMPD for laser isotope separation
299
Modelling of multimachine transients during unbalanced power system disturbances
300
Modelling of multi-nutrient interactions in growth of the dinoflagellate microalga Protoceratium reticulatum using artificial neural networks
301
Modelling of multiple crack-branching from Mode-I crack-tip in isotropic solids
302
Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP)
303
Modelling of multiple intra-time step collisions in the hard-sphere discrete element method
304
Modelling of multiple sclerosis: lessons learned in a non-human primate
305
Modelling of multiple short-length-scale stall cells in an axial compressor using evolved GMDH neural networks
306
Modelling of multiple system atrophy in mice
307
Modelling of multiple-mechanism agglomeration in a crystallization process
308
Modelling of muscle behaviour by the finite element method using Hillʹs three-element model
309
Modelling of nano-filler reinforcement, filler strength and experimental results of nanosilica composites made by a precipitation method
310
Modelling of nanofiltration in softening water Original Research Article
311
Modelling of nanoscale ferroelectrics from atomistic simulations
312
Modelling of natural and synthetic polyelectrolyte interactions in natural waters by using SIT, Pitzer and Ion Pairing approaches
313
Modelling of natural convective heat transfer at an internal surface
314
Modelling of natural fermentation in cowpeas using response surface methodology Original Research Article
315
Modelling of negative bias column for coarse particles flotation
316
Modelling of neuronal circuits: the future is bright
317
Modelling of Neutral to Earth Voltage (NTEV) using RLC Grounding System and Current Injection Method
318
Modelling of n-hexadecane hydroisomerization and hydrocracking reactions on a Mo/Hβ-alumina Bi-functional catalyst, using the single event concept
319
Modelling of nicotine diffusion from mainstream tobacco smoke within denuder tubes
320
Modelling of Nitrate Leaching on a Regional Scale Using a GIS
321
Modelling of nitrogen leaching from experimental onion field under drip fertigation
322
Modelling of nitrogen leaching under a complex winter wheat and red clover crop rotation in a drained agricultural field
323
Modelling of nitrogen release from MBT waste
324
Modelling of nitrogen turnover and leaching in Saxony
325
Modelling of NO and N2O emissions from biomass-fired circulating fluidized bed combustors
326
Modelling of NO formation in the combustion of coal blends
327
Modelling of non-catalytic biodiesel synthesis under sub and supercritical conditions: The influence of phase distribution
328
Modelling of non-consolidated oil shale semi-coke forward combustion: Influence of carbon and calcium carbonate contents
329
Modelling of nonconvex nonsmooth energy problems. Dynamic hemivariational inequalities with impact effects
330
Modelling of non-isothermal transformations in alloys containing a particle distribution Original Research Article
331
Modelling of non-laminar phenomena in high reliability hydrostatic seals operating in extreme conditions
332
Modelling of nonlinear damage on elastic brittle materials
333
Modelling of nonlinear modal interactions in the transient dynamics of an elastic rod with an essentially nonlinear attachment
334
Modelling of non-premixed swirl burner flows using a Reynolds-stress turbulence closure
335
Modelling of nonreactive tracer dipole tests in a shear zone at the Grimsel test site
336
Modelling of non-uniform current diffusion coupled with thermohydraulic effects in superconducting cables Original Research Article
337
Modelling of NonUniform Piezoelectric MicroCantilever in Different Environments
338
Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments
339
Modelling of novel two section laser applications
340
Modelling of NOx emission factors from heavy and light-duty vehicles equipped with advanced aftertreatment systems
341
Modelling of nucleation and void growth in dynamic pressure loading, application to spall test on tantalum
342
Modelling of nutrient partitioning in growing pigs to predict their anatomical body composition. 1. Model description
343
Modelling of nutrient partitioning in growing pigs to predict their anatomical body composition. 2. Model evaluation
344
Modelling of observed double-junction effect
345
Modelling of observed double-junction effect
346
Modelling of odour dispersion around a pig farm building complex using AERMOD and CALPUFF. Comparison with wind tunnel results
347
Modelling of olive cake thin-layer drying process Original Research Article
348
Modelling of operator heuristics in dispatch for security enhancement
349
Modelling of optical durability of enhanced aluminum solar reflectors
350
Modelling of Optical Interaction in MOSFET for L Band Application
351
Modelling of optical interference effects in conjugated polymer films and devices
352
Modelling of optically active electromagnetic media Original Research Article
353
Modelling of optimal specification regions
354
Modelling of Optimal Unified Power Flow Controller (OUPFC) for optimal steady-state performance of power systems
355
Modelling of optimized shear scenarios with LHCD for high performance experiments on JET
356
Modelling of optimized shear scenarios with LHCD for high performance experiments on JET
357
Modelling of organic magnetoresistance as a function of temperature using the triplet polaron interaction
358
Modelling of organic matter degradation in constructed wetlands for treatment of combined sewer overflow
359
Modelling of organic nanograting heterojunctions for photoelectric conversion
360
Modelling of organic-solvent flux through a polyimide membrane
361
Modelling of orographic precipitation over Iberia: a springtime case study
362
Modelling of oversized material flow through a horizontal hydrotransport slurry pipe to optimize its acoustic detection
363
Modelling of oxide scale surface roughness in hot metal forming
364
Modelling of oxide surfaces
365
Modelling of oxygen and nitrogen cycling as a function of macrophyte community in the Thau lagoon
366
Modelling of ozone concentrations using a Takagi-Sugeno model
367
Modelling of packed bed membrane reactors for autothermal production of ultrapure hydrogen
368
Modelling of palm oil production using fuzzy expert system
369
Modelling of paralytic shellfish toxin biotransformations in the course of Crassostrea gigas detoxification kinetics
370
Modelling of paralytic shellfish toxin biotransformations in the course of Crassostrea gigas detoxification kinetics
371
Modelling of parameters for optimization of maturity in composting trimming residues
372
Modelling of parboiled rice in superheated-steam fluidized bed Original Research Article
373
Modelling of partial discharge development in electrical tree channels
374
Modelling of partially-resolved oceanic symmetric instability
375
Modelling of particle beams
376
Modelling of particle breakage during drying
377
MODELLING OF PARTICLE FORMATION FROM NO3 OXIDATION OF SELECTED MONOTERPENES
378
Modelling of particle nucleation and growth in binary alloys under elastic deformation: An application to a Cu–0.95 wt%Co alloy
379
Modelling of particle stratification in jigs by the discrete element method
380
Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030
381
Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030
382
Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030
383
Modelling of particulate matter mass emissions from a light-duty diesel vehicle
384
Modelling of paste flows subject to liquid phase migration
385
Modelling of Pb–(TAPS)x–(OH)y system and refinement of stability constants in the region of lead hydrolysis and lead hydroxide precipitation
386
Modelling of PCB transients with boundary elements/method of moments in the frequency domain
387
Modelling of PCDD/F release from MSW bio-drying Original Research Article
388
Modelling of peak-flow wall shear stress in major airways of the lung
389
Modelling of penetration of ions through a shutter grid in ion mobility spectrometers
390
Modelling of pepsin digestibility of myofibrillar proteins and of variations due to heating
391
Modelling of perfectly and weakly bonded laminated plates and shallow shells
392
Modelling of permafrost freezing and melting and the impact of a climatic cycle on groundwater flow at the Meuse/Haute-Marne site
393
Modelling of permeability loss in membrane filtration: Re-examination of fundamental fouling equations and their link to critical flux Original Research Article
394
Modelling of permeability of textile reinforcements: lattice Boltzmann method
395
Modelling of pH and inorganic aluminium after termination of liming in 3000 Swedish lakes
396
Modelling of pH dependent n-octanol/water partition coefficients of ionizable pharmaceuticals
397
Modelling of pharmaceutical residues in Australian sewage by quantities of use and fugacity calculations
398
Modelling of phase diagrams and thermodynamic properties using Calphad method – Development of thermodynamic databases
399
Modelling of phase equilibria in MCrAlY coating systems
400
Modelling of phase equilibria of glycol ethers mixtures using an association model
401
Modelling of phase separation in liquids with a miscibility gap
402
Modelling of phase transformation kinetics in Ti alloys - Isothermal treatments
403
Modelling of phase transformation kinetics in Ti alloys – Isothermal treatments Original Research Article
404
Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)
405
Modelling of phase-grating based wideband tuneable lasers with simplified quasi-digital wavelength selection
406
Modelling of phenolic resin polymerisation
407
Modelling of Phospholipid Translocation in the Erythrocyte Membrane: A Combined Kinetic and Thermodynamic Approach
408
Modelling of phosphorus and suspended solids in Cootes Paradise marsh
409
Modelling of phosphorus and suspended solids in Cootes Paradise marsh
410
MODELLING OF PHOSPHORUS PRECIPITATION IN WASTEWATER TREATMENT PLANTS WITH ENHANCED BIOLOGICAL PHOSPHORUS REMOVAL
411
MODELLING OF PHOSPHORUS PRECIPITATION IN WASTEWATER TREATMENT PLANTS WITH ENHANCED BIOLOGICAL PHOSPHORUS REMOVAL
412
Modelling of phosphorus removal from aqueous and wastewater samples using ferric iron
413
Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films
414
Modelling of photo-induced changes in chalcogenide glasses: a-Se and a-AsSe Original Research Article
415
Modelling of physical ageing in starch using the TNM equation Original Research Article
416
Modelling of physical and reactive processes during biodegradation of a hydrocarbon plume under transient groundwater flow conditions
417
Modelling of piezolaminated plates using layerwise mixed finite elements
418
Modelling of plane composite frames in unpropped construction
419
Modelling of plane strain compression (PSC) test for aluminium alloys using finite elements ، fuzzy logic
420
Modelling of plane strain interfacial fracture in incompressible materials
421
Modelling of plasma activated CVD of Co–C–O layers in parallel plate reactor
422
Modelling of plasma and impurity behaviour in a tokamak with a stochastic layer1
423
Modelling of plasma particle interactions and coating growth for plasma spraying of hydroxyapatite
424
Modelling of plasma–particle two-phase flow using statistical techniques
425
Modelling of plastic anisotropy in heat-treated aluminium extrusions
426
Modelling of plastic flow localisation and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law
427
Modelling of plowing and shear friction coefficients during high-temperature ball-on-disc tests
428
Modelling of PM10 concentrations over Milano urban area using two aerosol modules
429
Modelling of pneumatic tractor tyre interaction with multi-layered soil
430
Modelling of point and non-point nutrient loadings from a watershed
431
Modelling of point defects in anisotropic media with an application to ferroelectrics
432
Modelling of pollutant behaviour in estuaries: Application to cadmium in the Loire estuary
433
Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding
434
Modelling of polysulfone membrane formation by immersion precipitation Original Research Article
435
Modelling of porous silicon formation process
436
Modelling of porphyroclasts in simple shear and the role of stress variations at grain boundaries
437
Modelling of possible mud volcanism on Titan
438
Modelling of potassium exchange in a natural, polyionic montmorillonite under hydrothermal conditions
439
Modelling of powder compaction process using an endochronic plasticity model
440
Modelling of power and energy requirements for tillage implements operating in Serdang sandy clay loam, Malaysia
441
Modelling of power law liquid–solid mass transfer in packed beds at Darcy regime
442
Modelling of power plant dynamics and uncertainties for robust control synthesis
443
Modelling of Precast Concrete Composite Slab Using Finite and Interface Elements
444
Modelling of precision hard cutting using implicit finite element methods
445
Modelling of pressure strain correlation in compressible turbulent flow
446
Modelling of pricing and market impacts for water options
447
Modelling of primary alkaline battery cathodes: A simplified model
448
Modelling of primary bcc-Fe crystal growth in a Fe85B15 amorphous alloy
449
Modelling of primary bcc-Fe crystal growth in a Fe85B15 amorphous alloy Original Research Article
450
Modelling of probability liquefaction based on standard penetration tests using the jointly distributed random variables method
451
Modelling of process parameters on the working of P/M copper preforms
452
Modelling of processes in fractured rock using FEM/FVM on multidimensional domains
453
Modelling of Progressive and Instantaneous Failures of Foliated Rock Slopes
454
Modelling of progressive interface failure under combined normal compression and shear stress
455
Modelling of progressive short waves using wave envelopes
456
Modelling of properties and distribution of steel fibres within a fine aggregate concrete
457
Modelling of proton exchange membrane fuel cell performance based on semi-empirical equations
458
Modelling of PT326 Hot Air Blower Trainer Kit Using PRBS Signal and Cross-Correlation Technique
459
Modelling of pulsatile blood flow in arterial trees of retinal vasculature
460
Modelling of pulverized coal boilers: review and validation of on-line simulation techniques
461
Modelling of pumped-storage generation in sequential Monte Carlo production simulation
462
Modelling of pyrolysis and combustion of gluten–glycerol-based bioplastics
463
Modelling of pyrolysis of coal–biomass blends using thermogravimetric analysis
464
Modelling of pyrolysis of large wood particles
465
Modelling of pyrolytic laser-induced deposition
466
Modelling of Quality in Service with Used Structural Equation Model (PLS): A Case Study of Urban Parks in Shiraz
467
Modelling of quasi-brittle behaviour: a discrete approach coupling anisotropic damage growth and frictional sliding
468
Modelling of quasi-periodic oscillations with wave packets
469
Modelling of radiation impact on ITER Beryllium wall
470
Modelling of radiation quantities and photolysis frequencies in the aqueous phase in the troposphere
471
Modelling of radiation transfer in metallic powders at laser treatment
472
Modelling of radiative PAR transfer in a tunnel greenhouse Original Research Article
473
Modelling of radioactive material release from waste packages in case of a fire event
474
Modelling of radiocesium in lakes — the VAMP model
475
Modelling of radiocesium in lakes—Lake sensitivity and remedial strategies
476
Modelling of radon concentration peaks in thermal spas: Application to Polichnitos and Eftalou spas (Lesvos Island—Greece)
477
Modelling of rain splash trajectories and prediction of rain splash height
478
Modelling of Random Geometrical Imperfections and Reliability Calculations for Thin Cylindrical Shell Subjected to Lateral Pressure
479
Modelling of random variation of three-phase voltage unbalance in electric distribution systems using the trivariate Gaussian distribution
480
Modelling of rare plant species richness by landscape variables in an agriculture area in Finland
481
Modelling of R-curve behaviour in ceramic–metal laminates
482
Modelling of R-curve behaviour in ceramic–metal laminates
483
Modelling of reaction_diffusion processes: the theory of catalytic electrode processes at hemispheroidal ultramicroelectrodes
484
Modelling of reactive separation processes: reactive absorption and reactive distillation
485
Modelling of reactive separations including fast chemical reactions in CSTR
486
Modelling of reactive stripping in monolith reactors
487
Modelling of recharge and pollutant fluxes to urban groundwaters
488
Modelling of reciprocating and scroll compressors
489
Modelling of recombination velocity and doping influence in epitaxial silicon solar cells
490
MODELLING OF RECONFIGURABLE TERAHERTZ INTEGRATED ARCHITECTURE (RETINA) SIW STRUCTURES
491
Modelling of recrystallisation in mechanically alloyed materials
492
Modelling of recrystallisation in mechanically alloyed materials
493
Modelling of recrystallisation textures in aluminium alloys: I. Model set-up and integration Original Research Article
494
Modelling of recrystallisation textures in aluminium alloys: II. Model performance and experimental validation Original Research Article
495
Modelling of recrystallization textures
496
Modelling of rectangular RC columns strengthened with FRP
497
Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration
498
Modelling of reinforced polymer composites subject to thermo-mechanical loading
499
Modelling of Relationship Between Service Quality, Environmental Impact, Attitude and Intention to Use Park-and-Ride
500
Modelling of relief of phase reflection diffraction grating
501
Modelling of residual stress profiles in plasma nitrided tool steel
502
Modelling of Residual Stress Relaxation: A Review
503
Modelling of residual stresses in the shot peened material C-1020 by artificial neural network
504
Modelling of Resonance Frequency of MEMS Corrugated Diaphragm for Capacitive Acoustic Sensors
505
Modelling of resonant switched-mode converters using SIMULINK
506
Modelling of retention in analytical supercritical fluid chromatography for CO2—Methanol mobile phase
507
Modelling of retention of pesticides in reversed-phase high-performance liquid chromatography: Quantitative structure-retention relationships based on solute quantum-chemical descriptors and experimental (solvatochromic and spin-probe) mobile phase descri
508
Modelling of rheological behaviour of pummelo juice concentrates using master-curve Original Research Article
509
Modelling of rheological behaviour of soursop juice concentrates using shear rate–temperature–concentration superposition Original Research Article
510
Modelling of rigid objects by bidimensional moments. Applications to the estimation of 3D rotations
511
Modelling of rock alteration due to coupled heat and mass transport
512
Modelling of rollers in calculation of slewing bearing with the use of finite elements
513
Modelling of root ABA synthesis, stomatal conductance, transpiration and potato production under water saving irrigation regimes
514
Modelling of Root Growth and Bending in Two Dimensions
515
Modelling of runoff behaviour of particle-bound polycyclic aromatic hydrocarbons (PAHs) from roads and roofs
516
Modelling of rupture planes for peak ground accelerations and its application to the isoseismal map of MMI scale in Indian region
517
Modelling of safety glass for crash simulation
518
Modelling of safety management systems
519
Modelling of salt crystallization in building materials with microstructure – Poromechanical approach
520
Modelling of SAW filter based on ZnOrdiamondrSi layered structure including velocity dispersion
521
Modelling of Scenedesmus obliquus; function of nutrients with modified Gompertz model
522
Modelling of seasonal exchange flows through the Dardanelles Strait
523
Modelling of sediment suspensions in oscillating grid turbulence
524
Modelling of sediment transport and bed deformation in rivers with continuous bends
525
Modelling of Sediment Transport in Beris Fishery Port
526
Modelling of segment structures: Boudins, bone-boudins, mullions and related single- and multiphase deformation features
527
Modelling of seismic energy transport at volcanoes with real topography and complex propagation medium
528
Modelling of Seismic Ground Motion in Santiago de Cuba City from Earthquakes in Oriente Fault Seismic Zone
529
Modelling of selectivity data obtained from microactivity testing of FCC catalysts Original Research Article
530
Modelling of self-protected light-triggered thyristors
531
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the current–voltage characteristics
532
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the current–voltage characteristics
533
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the internal field
534
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the internal field
535
Modelling of semiconductor laser amplifier for the terahertz optical asymmetric demultiplexer
536
Modelling of sequencing batch reactors
537
Modelling of sequential groundwater treatment with zero valent iron and granular activated carbon
538
Modelling of sewerage systems strengthened with composites plates
539
Modelling of shape anvils in free hot forging of long products
540
Modelling of shear rate distribution in two planetary mixtures for studying development of cake batter structure Original Research Article
541
Modelling of short crack propagation – Transition from stage I to stage II
542
Modelling of short wave diffraction problems using approximating systems of plane waves
543
Modelling of SiC sublimation growth process: analyses of macrodefects formation
544
Modelling of SiC sublimation growth process: analyses of macrodefects formation
545
Modelling of silica diffusion experiments with 32Si in Boom Clay
546
Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant
547
Modelling of simulated clay precipitation within reservoir sandstones
548
Modelling of simultaneous estimating the laser heat flux and melted depth during laser processing by inverse methodology
549
Modelling of Singaporeʹs topographic transformation based on DEMs
550
Modelling of Single and Binary Adsorptions of Heavy Metals Onto Activated Carbon - Equilibrium Studies
551
Modelling of single gas permeation in real MFI membranes
552
Modelling of single-phase flow for horizontal wells in a stratified medium
553
Modelling of single-phase nonuniform transmission lines in electromagnetic transient simulations
554
Modelling of sinkage tests in tilled soils for mobility study
555
Modelling of size effects in microforming process with consideration of grained heterogeneity
556
Modelling of size effects on strengthening of multiphase Al based composites
557
Modelling of slaked lime–metakaolin mortar engineering characteristics in terms of process variables
558
Modelling of sliding friction for carbon black and silica filled elastomers on road tracks
559
Modelling of sloshing modulated angular momentum fluctuations actuated by gravity gradient associated with spacecraft slew motion
560
Modelling of slurry droplet drying
561
Modelling of SMA materials: Training and two way memory effects
562
Modelling of small secondary energy storage units in long-term planning
563
Modelling of snowmelt erosion and sediment yield in a small low-mountain catchment in Germany
564
Modelling of SO2 pollution changes with fuel shifting in Gebze, Turkey
565
Modelling of SO2 pollution changes with improving thermal performance of buildings in Gebze, Turkey
566
Modelling of Soft Connective Tissues to Investigate Female Pelvic Floor Dysfunctions
567
Modelling of soft tissue deformation for laparoscopic surgery simulation
568
Modelling of Soil Displacement Resulting from Sweep during Tillage Operation Using Image Processing
569
MODELLING OF SOIL EROSION PROCESSES AND RUNOFF FOR SUSTAINABLE WATERSHED MANAGEMENT: CASE STUDY OUED EL ABID WATERSHED, MOROCCO
570
Modelling of soil nitrogen dynamics within the decision support system DANUBIA
571
Modelling of soil nitrogen dynamics within the decision support system DANUBIA
572
Modelling of soil nitrogen forms after organic amendments under controlled conditions
573
Modelling of soil nitrogen forms after organic amendments under controlled conditions
574
Modelling of soil nutrient budgets: an assessment of agricultural sustainability in Nepal
575
Modelling of soil vibrations from railway tunnels
576
Modelling of soil–seed contact using the Discrete Element Method (DEM)
577
Modelling of SOL transport and radiation losses for ITER with the integrated tokamak code TOKES
578
Modelling of solar adsorption refrigeration system in Nasiriya City
579
Modelling of solar cell degradation in space
580
Modelling of solar cells with down-conversion of high energy photons, anti-reflection coatings and light trapping
581
Modelling of solar energy potential in Nigeria using an artificial neural network model
582
Modelling of solar radiation influenced by topographic shading––evaluation and application for precision farming
583
Modelling of solar/diesel/battery hybrid power systems for far-north Cameroon
584
Modelling of solid flow effect on pressure drop in a vertical gas well
585
Modelling of solid fuel stoves
586
Modelling of solid particle aggregation dynamics in non-wetting liquid medium
587
Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys Original Research Article
588
Modelling of solidification for copper-base alloys during rapid solidification processing
589
Modelling of solidification for copper-base alloys during rapid solidification processing
590
Modelling of solidification of Ti-45 at%Al alloy ingot by the stochastic model
591
Modelling of solid-phase tea waste extraction for the removal of manganese from food samples by using artificial neural network approach
592
Modelling of solid-state, dissolution and solution-phase reactions at adhered solid–electrode–solvent (electrolyte) interfaces: electrochemistry of microcrystals of C60 adhered to an electrode in contact with dichloromethane (Bu4NClO4)
593
Modelling of solute and solvent transport through nanofiltration membranes Original Research Article
594
Modelling of solute and water transport in semi-permeable clay membranes: comparison with experiments
595
Modelling of Solute Aqueous Extraction from Carrots subjected to a Pulsed Electric Field Pre-treatment
596
Modelling of solute retention in the reversed-phase high-performance liquid chromatography system with the chemically bonded 3-cyanopropyl stationary phase
597
Modelling of solute transport in non-aqueous nanofiltration
598
Modelling of some dwelling internal microclimates
599
Modelling of some mechanical malfunctions of the human basilar membrane
600
Modelling of some soil physical quality indicators using hybrid algorithm principal component analysis - artificial neural network
601
Modelling of soot formation in a heavy-duty diesel engine with conditional moment closure
602
Modelling of soot oxidation by in various types of diesel particulate filters
603
Modelling of sound fields in enclosed spaces with absorbent room surfaces Part II. Absorptive panels
604
Modelling of sound fields in enclosed spaces with absorbent room surfaces Part III. Barriers
605
Modelling of sound propagation in a non-uniform lined duct using a Multi-Modal Propagation Method
606
Modelling of sound propagation to three-dimensional urban courtyards using the extended fourier PSTD method
607
Modelling of soybean seed drying in concurrent sliding bed dryers: Effect of the number of stages on the seed quality and drying performance
608
Modelling of space weather effects on pipelines
609
Modelling of space weather effects on satellite drag Original Research Article
610
Modelling of spall formation in a plate made of austempered ductile iron having a subsurface-edge crack
611
Modelling of spatial point processes derived from a sequence of auto-Poisson lattice schemes
612
Modelling of spatial variations in vibration analysis with application to an automotive windshield
613
Modelling of spatio-temporal population dynamics of earthworms under wetland conditions—An integrated approach
614
Modelling of spatio-temporal population dynamics of earthworms under wetland conditions—An integrated approach
615
Modelling of species in hood fires by conditional moment closure
616
Modelling of Specific Moisture Extraction Rate and Leakage Ratio in a Condensing Tumble Dryer
617
Modelling of splitting and delamination in notched cross-ply laminates
618
Modelling of spontaneous adhesion phenomena in micro-electro-mechanical systems
619
Modelling of Sprayer Boom Dynamics by Means of Maximum Likelihood Identification Techniques, Part 1: A Comparison of Input-output and Output-only Modal Testing
620
Modelling of Sprayer Boom Dynamics by Means of Maximum Likelihood Identification Techniques, Part 2: Sensitivity-based Mode Shape Normalisation
621
Modelling of sprays in containment applications with A CMFD code Original Research Article
622
Modelling of springback in creep forming thick aluminum sheets
623
Modelling of sputtering yield amplification effect in reactive deposition of oxides
624
Modelling of sputtering yield amplification in serial reactive magnetron co-sputtering
625
Modelling of squeal noise attenuation of ring damped wheels
626
Modelling of stable isotope fractionation by methane oxidation and diffusion in landfill cover soils
627
Modelling of stalling motors during voltage stability studies
628
Modelling of Staphylococcus Aureus under the Effect of Carum Copticum Essential Oil, pH, Temperature, and Inoculum Level
629
Modelling of static friction in rubber–metal contact
630
Modelling of static recrystallisation by combining FEM with empirical models
631
Modelling of stationary and growing cracks in FE framework without remeshing: a state-of-the-art review Review Article
632
Modelling of steady state erosion of CFC actively water-cooled mock-up for the ITER divertor
633
Modelling of steam fired double effect vapour absorption chiller using neural network
634
Modelling of steel fiber-reinforced concrete under multi-axial loads
635
Modelling of steel lattice tower angle legs reinforced for increased load capacity
636
Modelling of stem biomass accumulation in Pinus densiflora seedlings exposed to aqueous-phase OH radicals generating mist
637
Modelling of stem biomass accumulation in Pinus densiflora seedlings exposed to aqueous-phase OH radicals generating mist
638
Modelling of stimulus response experiments in the feed channel of spiralwound reverse osmosis membranes
639
Modelling of stomatal conductance and ozone flux of Norway spruce: comparison with field data
640
Modelling of stomatal density response to atmospheric
641
Modelling of strain hardening and its relation to the onset of Portevin-Le Chatelier effect in Al-Mg alloys
642
Modelling of strain hardening and its relation to the onset of Portevin-Le Chatelier effect in Al-Mg alloys
643
Modelling of strain hardening and microstructural evolution in equal channel angular extrusion
644
Modelling of strain rate effects on matrix dominated elastic and failure properties of unidirectional fibre-reinforced polymer–matrix composites
645
Modelling of strained ZnSSe on relaxed ZnSSe-based structures for blue light emission
646
Modelling of stratified gas–liquid two-phase flow in horizontal circular pipes
647
Modelling of stress due to shrinkage during drying of spaghetti Original Research Article
648
Modelling of stress softening in elastomeric materials: foundations of simple theories
649
Modelling of stresses evolution in growing thermal oxides on metals. A methodology to identify the corresponding mechanical parameters
650
Modelling of stretched natural gas diffusion flames
651
Modelling of strong coupling regime in bulk GaN microcavities using transfer matrix and quasiparticle formalisms
652
Modelling of strong wind flows over complex terrain at small geometric scales
653
Modelling of structural and physicomechanical properties of poly-paraphenylene using molecular orbital and molecular mechanical methods
654
Modelling of structure changes in TRIP type steel during hot deformation
655
Modelling of structure geometry in Bridge Management Systems
656
Modelling of Student Readiness Switch to Cycling Modes at UKM
657
Modelling of stylolite geometries and stress scaling
658
Modelling of subgrid-scale fluxes
659
Modelling of submerged membrane bioreactor: Conceptual study about link between activated slugde biokinetics, aeration and fouling process
660
Modelling of sub-micrometer particle concentrations in free-flowing freeway traffic, Brisbane, Australia: some empirical results
661
Modelling of sub-micron-sized particle deposition in a laminar wall jet—an investigation of the role of shielding
662
Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology
663
Modelling of sulfide oxidation with reactive transport at a mine drainage site
664
Modelling of sulfuric acid and ammonium sulfate aerosol formation in the aerrea2 reactor
665
Modelling of Sunspot Equilibrium Considering Stratification and Temperature Gradients
666
Modelling of Supercritical Fluid Extraction by Hybrid Peng–Robinson Equation of State and Genetic Algorithms
667
Modelling of superheated steam drying for combined heat and power at a corn ethanol plant using Aspen Plus software
668
Modelling of surface crack growth under lubricated rolling-sliding contact loading
669
Modelling of surface evaporation by laser ablation
670
Modelling of surface evolution in abrasive jet micro-machining including particle second strikes: A level set methodology
671
Modelling of surface finish and material removal rate in rough honing
672
Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts
673
Modelling of surface plasmon resonance sensor for detection of mass concentration of ethanol and methanol in a binary mixture
674
Modelling of Surface Roughness Performance of Coated Cemented Carbide Groove Cutting Tool Via Artificial Neural Networks
675
Modelling of surface waves breaking effects in the ocean upper layer
676
Modelling of Suspended Sediment Transport in Coastal Areas Under Waves and Currents
677
Modelling of swelling of Fe–Cu compacts sintered at temperatures above the copper melting point
678
Modelling of Switched Mode Fly-back Supply for Engineering Education
679
Modelling of switched mode power converters using bond graph
680
Modelling of switching systems in bond graphs using the concept of switched power junctions
681
Modelling of syntactical processing in the cortex
682
Modelling of T Tauri jets with low mass accretion rate
683
Modelling of tap-changer transformers in an energy management system
684
Modelling of tar formation and evolution for biomass gasification: A review
685
Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch
686
Modelling of TCSC dynamics for control and analysis of power system stability
687
Modelling of temperature conditions near the bottom of well IDDP-1 in Krafla, Northeast Iceland
688
Modelling of temperature distribution in a solid polymer electrolyte fuel cell stack
689
Modelling of temperature evolution on metals during laser hardening process
690
Modelling of temperature field and residual stress of vacuum brazing for stainless steel plate-fin structure
691
Modelling of temperature history and phase transformations during cooling of steel
692
Modelling of Terrain Surface
693
Modelling of tetrahydrofuran promoted gas hydrate systems for carbon dioxide capture processes
694
Modelling of texture evolution in metals accounting for lattice reorientation due to twinning
695
Modelling of the abrasive water jet cutting process
696
Modelling of the acid hydrolysis of potato (Solanum tuberosum) for fermentative purposes
697
Modelling of the acid–base properties of natural and synthetic adsorbent materials used for heavy metal removal from aqueous solutions
698
Modelling of the acidification process and rheological properties of milk fermented with a yogurt starter culture using response surface methodology
699
Modelling of the acoustical properties of hemp particles
700
Modelling of the adsorption of bovine serum albumin on porous polyethylene membrane by back-propagation artificial neural network
701
Modelling of the adsorption of phenolic acids onto α,γ–alumina particles
702
Modelling of the adsorption of the chromium ion by modified clays Original Research Article
703
Modelling of the age hardening behaviour of Al–Mg–Si alloys Original Research Article
704
Modelling of the agglomeration in suspension process with multidimensional kernels
705
Modelling of the April 5, 2003, Stromboli (Italy) paroxysmal eruption from the inversion of broadband seismic data
706
Modelling of the association mechanism of a series of rodenticide molecules with lipid membrane investigated by computational chemistry and biochromatography Original Research Article
707
Modelling of the atomization of a plain liquid fuel jet in crossflow at gas turbine conditions
708
Modelling of the auto-ignition angle in diesel HCCI engines through D-optimal design
709
Modelling of the available latent heat of a CO2 hydrate slurry in an experimental loop applied to secondary refrigeration
710
Modelling of the batch treatment of wet granular solids with superheated steam in fluidized beds
711
Modelling of the bedrock response to glacial loading at the Olkiluoto site, Finland
712
Modelling of the behaviour of gas-solid two-phase mixtures flowing through packed beds
713
Modelling of the behaviour of seismically strengthened masonry walls subjected to cyclic in-plane shear
714
Modelling of the bioleaching of sulphide ores: application for the simulation of the bioleaching/gravity section of the Kasese Cobalt Company Ltd process plant
715
Modelling of the bond–slip behavior in FRP reinforced masonry
716
Modelling of the borehole filling of double U-pipe heat exchangers
717
Modelling of the bottom water flow through the Romanche Fracture Zone with a primitive equation model––Part 2: Comparison of vertical mixing parameterisations with observations
718
Modelling of the break up mechanism in gas atomization of liquid metals Part II. The gas flow model
719
Modelling of the break up mechanism in gas atomization of liquid metals. Part I: The surface wave formation model
720
Modelling of the canopy conductance of potted cherry trees based on an artificial neural network
721
Modelling of the carbon nanotube bridging effect on the toughening of polymers and experimental verification
722
Modelling of the cation binding properties of fulvic acids: an extension of the RANDOM algorithm to include nitrogen and sulphur donor sites
723
Modelling of the CCK antagonist activity of benzodiazepines on gastrin receptors
724
Modelling of the change in national exchange rate model depending on the economic parameters of a natural gas cogeneration system: Turkey case
725
Modelling of the coefficient of performance of an air-cooled screw chiller with variable speed condenser fans
726
Modelling of the combined late-winter ice cap edge and slope winds in Mars Hellas and Argyre regions
727
Modelling of the combustion process and NOx emission in a utility boiler
728
Modelling of the compression behaviour of metallic hollow-sphere structures: About the influence of their architecture and their constitutive material’s equations
729
Modelling of the concentration polarization of the bivalents salts using a Nanomax50 membrane in nanofiltration process Original Research Article
730
Modelling of the conductive heat transfer through nano-structured porous silica materials
731
Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary, India
732
Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary, India
733
Modelling of the conversion of weak organic acids by bipolar membrane electrodialysis Original Research Article
734
Modelling of the coolant flow with heat flow controlled temperature sources in thermal networks [in induction motors]
735
Modelling of the crack growth initiation in viscoelastic media by the Gθv-integral
736
Modelling of the Current Density Distributions during Cortical Electric Stimulation for Neuropathic Pain Treatment
737
Modelling of the cutting tool stresses in machining of Inconel 718 using artificial neural networks
738
Modelling of the defect structure in GaN MOCVD thin films by X-ray diffraction
739
Modelling of the defect structure in GaN MOCVD thin films by X-ray diffraction
740
Modelling of the deformation process under thermo-mechanical fatigue conditions
741
Modelling of the deposition of retardant in a tree crown during fire fighting
742
Modelling of the dispersion and deposition of coarse particulate matter under neutral atmospheric conditions
743
Modelling of the dose-rate variations with depth in the Martian regolith using GEANT4
744
Modelling of the dose-rate variations with depth in the Martian regolith using GEANT4
745
Modelling of the dynamic behaviour of profiled composite floors
746
MODELLING OF THE DYNAMIC LOAD PLATE TEST WITH THE LIGHT FALLING WEIGHT DEVICE
747
Modelling of the dynamic threshold MOSFET
748
Modelling of the dynamic tool–chip interface in metal cutting
749
MODELLING OF THE DYNAMICS OF A DROPLET USING THE LATTICE BOLTZMANN METHOD
750
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method
751
Modelling of the Effect of Different Infeed Angles and Cutting Areas on the Cutting Forces in External Threading
752
Modelling of the effect of dislocation channel on intergranular microcrack nucleation in pre-irradiated austenitic stainless steels during low strain rate tensile loading
753
Modelling of the effect of dry periods on yielding of spring barley
754
Modelling of the effect of friction on cold strip rolling
755
Modelling of the effect of precipitates on work-hardening, ductility and impact behaviour of ferritic–martensitic Cr steels
756
Modelling of the effect of solute structure and mobile phase pH and composition on the retention of phenoxy acid herbicides in reversed-phase high-performance liquid chromatography Original Research Article
757
Modelling of the effectiveness of bicycle helmets under impact
758
Modelling of the effectiveness of bicycle helmets under impact
759
Modelling of the effectiveness of bicycle helmets under impact
760
Modelling of the effects of welding conditions on dilution of stainless steel claddings produced by gas metal arc welding procedures
761
Modelling of the elasto-viscoplastic damage behaviour of glassy polymers
762
Modelling of the Electric Field Distribution in Deep Transcranial Magnetic Stimulation in the Adolescence, in the Adulthood, and in the Old Age
763
Modelling of the electrochemical machining process by the boundary element method
764
Modelling of the elution behaviour in hybrid micellar eluents with different organic modifiers Original Research Article
765
Modelling of the energy absorption by polymer composites upon ballistic impact
766
Modelling of the enzymatic synthesis of taste dipeptides with simultaneous extraction in a membrane phase contactor Original Research Article
767
Modelling of the equilibrium properties of the system H3PO4–H2O: representation of VLE and liquid phase composition
768
Modelling of the evolution of crack of nanoscale in iron
769
Modelling of the evolution of micro-grain misorientations during creep of tempered martensite ferritic steels
770
Modelling of the excitation and the propagation of nerve impulses by natural and artificial stimulations Original Research Article
771
Modelling of the fate of selected endocrine disruptors in a municipal wastewater treatment plant in South East Queensland, Australia Original Research Article
772
Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties
773
Modelling of the field emission microtriode with emitter covered with porous silicon
774
Modelling of the film thickness effecton the carrier’s mobility in polysilicon thin film transistors
775
Modelling of the fin type heat exchanger for the HTS current leads of W7-X and JT-60SA Original Research Article
776
Modelling of the finned convection section of a biomass boiler
777
Modelling of the flexural behaviour of RC beams subjected to localised and uniform corrosion
778
Modelling of the flooding in the Okavango Delta, Botswana, using a hybrid reservoir-GIS model
779
Modelling of the flow at the rotor disc in a geothermal turbine of 110 MW
780
Modelling of the flow behavior of activated carbon cloths using a neural network approach
781
Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation
782
Modelling of the formation conditions of structure-H hydrates
783
Modelling of the Forming Limit Band –A new Method to Increase the Robustness in the Simulation of Sheet Metal Forming Processes
784
Modelling of the Frame “Russia” In the French Newspaper Discourse
785
Modelling of the fuel mechanical behavior: from creep laws to internal variable models Original Research Article
786
Modelling of the gas to fuel droplets radiative exchange
787
Modelling of the grain growth and the densification of SnO2-based ceramics
788
Modelling of the grain size probability distribution in polycrystalline nanomaterials
789
Modelling of the growth of populations of Listeria monocytogenes and a bacteriocin-producing strain ofLactobacillus in pure and mixed cultures Original Research Article
790
Modelling of the growth/no growth interface of Wallemia sebi and Eurotium herbariorum as a function of pH, aw and ethanol concentration
791
Modelling of the growth–no growth interface of Issatchenkia occidentalis, an olive spoiling yeast, as a function of the culture media, NaCl, citric and sorbic acid concentrations: Study of its inactivation in the no growth region
792
Modelling of the hamstring muscle group by use of fractional derivatives
793
Modelling of the hardness of electroplated nickel coatings on copper substrates
794
Modelling of the heat exchangers of a small capacity, hot water driven, air-cooled H2O–LiBr absorption cooling machine
795
Modelling of the heat input for face-milling processes
796
Modelling of the heat transfer of transport rollers in kilns
797
Modelling of the HFR-EU1BIS experiment and thermomechanical evaluation Original Research Article
798
Modelling of the high pressure–temperature effects on naringin hydrolysis based on response surface methodology
799
Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network
800
Modelling of the humidity effect on the barrier height in SnO2 varistors
801
Modelling of the hydrogen distribution at a crack tip
802
Modelling of the hydrogen distribution at a crack tip
803
Modelling of the hydro-mechanical response of sedimentary rocks of southern Ontario to past glaciations
804
Modelling of the hygroelastic behaviour of a wood-based composite for construction
805
Modelling of the hysteresis effect of target voltage in reactive magnetron sputtering process by using neural networks
806
Modelling of the impact of air shock wave on obstacle covered by porous screen
807
Modelling of the implantation and the annealing stages of 800 keV 3He implanted tungsten: Formation of nanovoids in the near surface region
808
Modelling of the indentation response of coatings and surface treatments
809
Modelling of the individual and combined effects of water activity and temperature on the radial growth of Aspergillus flavus and A. parasiticus on corn Original Research Article
810
Modelling of the inelastic behavior of powder based AlFe9V1Si2 alloy with intermetallic phase
811
Modelling of the influence of aerosol processes for the dispersion of vehicular exhaust plumes in street environment
812
Modelling of the influence of the vacancy source and sink activity and the stress state on diffusion in crystalline solids Original Research Article
813
Modelling of the initial stages of the electropolymerization mechanism of o-phenylenediamine
814
Modelling of the interaction between phase transformation and precipitation: Coupled kinetics in microalloyed multiphase steels
815
Modelling of the interaction of lower and higher modes in two-dimensional MHD-equations Original Research Article
816
Modelling of the interface between a thin film and a substrate within a strain gradient plasticity framework
817
Modelling of the interfacial behaviour in the Hi-Nicalon fibre-reinforced α-Si3N4 ceramic matrix composites using microindentation tests
818
Modelling of the interfacial behaviour in the Hi-Nicalon fibre-reinforced α-Si3N4 ceramic matrix composites using microindentation tests
819
Modelling of the interline power flow controller and the generalised unified power flow controller in Newton power flow
820
Modelling of the internal stress in dislocation cell structures
821
Modelling of the investment casting process
822
Modelling of the ion-exchange properties and indirect determination of the interstitial water composition of an argillaceous rock. Application to the Callovo-Oxfordian low-water-content formation
823
Modelling of the ionosphere/thermosphere behaviour during the April 2002 magnetic storms: A comparison of the UAM results with the ISR and NRLMSISE-00 data Original Research Article
824
Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France
825
Modelling of the kinetics of colour change in hazelnuts during air roasting Original Research Article
826
Modelling of the kinetics of thermal inactivation of glucoamylase from Aspergillus niger
827
Modelling of the Lenzing SO2 recovery process and validation with plant data
828
Modelling of the life cycle of Chironomus species using an energy-based model
829
Modelling of the life cycle of products with data acquisition features
830
Modelling of the loading rate in facultative wastewater stabilization ponds and the assessment of organic matter decline
831
Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects
832
Modelling of the long term fate of pesticide residues in agricultural soils and their surface exchange with the atmosphere: Part I. Model description and evaluation
833
Modelling of the long-term fate of pesticide residues in agricultural soils and their surface exchange with the atmosphere: Part II. Projected long-term fate of pesticide residues
834
Modelling of the Mannesmann effect
835
Modelling of the mass flow distribution around an array of rectangular blocks in-line arranged and simulating the cross-section of a winding disc-type transformer
836
Modelling of the mechanical behavior and damage processes of fibrous ceramic matrix composites: application to a 2-D SiC/SiC
837
Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure
838
Modelling of the mesophilic anaerobic co-digestion of olive mill wastewater with olive mill solid waste using anaerobic digestion model No. 1 (ADM1)
839
Modelling of the metallic phases of different Pt–Rh/Al2O3–CeO2 catalysts: influence of the rhodium loading and nature of the metallic precursors Original Research Article
840
Modelling of the micro-segregation of twin-roll thin strip casting
841
Modelling of the microstructure and strength evolution in Al–Mg–Si alloys during multistage thermal processing Original Research Article
842
Modelling of the microstructure and transport properties of concrete
843
Modelling of the microstructure: From classical cellular automata approach to the frontal one
844
Modelling of the migration of trace elements along groundwater flowpaths by using a steady state approach application to the site at El Berrocal (Spain)
845
Modelling of the mixed convection in the windings of a disc-type power transformer
846
Modelling of the moisture concentration field due to cyclical hygrothermal conditions in thick laminated pipes
847
Modelling of the monthly and daily behaviour of the runoff of the Xallas river using Box–Jenkins and neural networks methods
848
Modelling of the motion of a cart on a smooth rigid surface
849
Modelling of the motion of a disk rolling on a curve in
850
Modelling of the motion of a disk rolling on a smooth rigid surface Original Research Article
851
Modelling of the motion of a disk rolling on a torus
852
Modelling of the multiaxial elasto-plastic behaviour of porous metals with internal gas pressure
853
Modelling of the nitriding process
854
Modelling of the non-stationary thermal neutron transport in hydrogenous media using the MCNP code
855
Modelling of the non-stationary thermal neutron transport in hydrogenous media using the MCNP code
856
Modelling of the operation process of repairable technical objects with the use information from an artificial neural network
857
Modelling of the outer electron belt flux dropout and losses during magnetic storm main phase Original Research Article
858
Modelling of the panel zone in steel and composite moment frames
859
Modelling of the particle size distribution function in the nucleation and early stages of thin film growth
860
Modelling of the Pb17Li/water interaction within a blanket module
861
Modelling of the performance of asphalt pavement using response surface methodology
862
Modelling of the performance of asphalt pavement using response surface methodology—the kinetics of the aging
863
Modelling of the performance of industrial HDS reactors using a hybrid neural network approach
864
Modelling of the perimeter recombination effect in GaAs-based micro-solar cell
865
Modelling of the periodic anaerobic baffled reactor (PABR) based on the retaining factor concept
866
MODELLING OF THE PERMEABILITY FOR COLUMNAR DENDRITE STRUCTURES DURING SOLIDIFICATION OF MUSHY ALLOYS
867
Modelling of the phase behaviour for vegetable oils at supercritical conditions
868
Modelling of the physical behaviour of clay barriers close to water saturation
869
Modelling of the planar motion of a rolling four links robot
870
Modelling of the plasma spray process with liquid feedstock injection
871
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
872
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
873
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
874
Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach
875
Modelling of the plastification near the rough surface of a rail by the wheel–rail contact
876
Modelling of the pore flow in capillary electrochromatography
877
Modelling of the pore structure variation with pH for pore-filled pH-sensitive poly(vinylidene fluoride)–poly(acrylic acid) membranes
878
Modelling of the porous anodizing of aluminium: Generation of experimental input data and optimization of the considered model
879
Modelling of the post-localization behaviour in tube hydroforming of low carbon steels
880
Modelling of the prediction of tensile and density properties in particle reinforced metal matrix composites by using neural networks
881
Modelling of the Process of Solid-Liquid Extraction of Total Polyphenols from Soybeans
882
Modelling of the pyrolysis of high density polyethylene: Product distribution in a fluidized bed reactor
883
Modelling of the pyrolysis of wet wood
884
Modelling of the quasisaturation behaviour in the high-voltage MOSFET with vertical trench gate
885
Modelling of the rate of oil spill disappearance from seawater for Kuwaiti crude and its products
886
Modelling of the reaction of N-oxidation of 2-methylpyridine using hydrogen peroxide and a complex metal catalyst
887
Modelling of the receiver transient flux distribution due to cloud passages on a solar tower thermal power plant
888
Modelling of the relationship moisture content to nutrient transformation rate in river sediments
889
Modelling of the relationship moisture content to nutrient transformation rate in river sediments
890
Modelling of the residence time distribution in micromixers
891
Modelling of the residual state of friction stir welded plates Review Article
892
Modelling of the resuspension of particle clusters from multilayer aerosol deposits with variable porosity
893
Modelling of the retention of uncharged molecules with nanofiltration
894
Modelling of the Reynolds stress redistribution with a wall effect vector
895
Modelling of the rheological behaviour of aluminium alloys in multistep hot deformation using the multiple regression analysis and artificial neural network techniques
896
Modelling of the river flowrate: the influence of the training set selection
897
Modelling of the rock structure stress field near the cavities and estimation of the cavity effect influence on the tidal measurements Original Research Article
898
Modelling of the rolling processes by a 3-D rigid plastic/visco-plastic finite element method with shifted ICCG method
899
Modelling of the scatter in short fatigue cracks growth kinetics in relation with the polycrystalline microstructure
900
Modelling of the signal processing electronics of JET interferometer-polarimeter
901
Modelling of the signal processing electronics of JET interferometer-polarimeter
902
Modelling of the small pixel effect in gallium arsenide X-ray imaging detectors
903
Modelling of the small pixel effect in gallium arsenide X-ray imaging detectors
904
Modelling of the space-to-drift-time relationship of the ATLAS monitored drift-tube chambers in the presence of magnetic fields
905
Modelling of the space-to-drift-time relationship of the ATLAS monitored drift-tube chambers in the presence of magnetic fields
906
MODELLING OF THE SPALLED ROLLING ELEMENT BEARING VIBRATION SIGNAL: AN OVERVIEW AND SOME NEW RESULTS
907
Modelling of the spent fuel oxidation: Toward the operational model
908
Modelling of the static synchronous series compensator (SSSC) in three-phase Newton power flow
909
Modelling of the stiffness of elastic body
910
Modelling of the strand and mold temperature in the continuous steel caster
911
Modelling of the stress-strain state of block rock mass of ore deposits during development by caving mining systems
912
Modelling of the structure and vibrational properties of LDA, HDA, and VHDA amorphous ices
913
Modelling of the substrate heterogeneities experienced by a limited microbial population in scale-down and in large-scale bioreactors
914
Modelling of the sulfuric acid leaching of mechanically activated titanite
915
Modelling of the surface tension of binary and ternary mixtures with the gradient theory of fluid interfaces
916
Modelling of the surface tension of pure components with the gradient theory of fluid interfaces: a simple and accurate expression for the influence parameters
917
Modelling of the temperature and electric field dependence of substrate/gate current SILC with an elastic resonant trap assisted tunnelling mechanism
918
Modelling of the temperature and electric field dependence of substrate/gate current SILC with an elastic resonant trap assisted tunnelling mechanism
919
Modelling of the temperature distribution during field assisted sintering
920
Modelling of the temperature distribution during field assisted sintering Original Research Article
921
Modelling of the ternary system H3PO4/H2O/TBP
922
Modelling of the thermal behaviour of an ultracapacitor for a 42-V automotive electrical system
923
Modelling of the thermal-mechanical behaviour of a single size beryllium pebble bed
924
Modelling of the thermic exchanges during a drilling. Resolution with Adomianʹs decomposition method
925
Modelling of the thermodynamic properties of ionic solutions using a stepwise solvation-equilibrium model
926
Modelling of the thermodynamic properties of the ABr–CeBr3 (A=Li–Cs ) systems
927
Modelling of the thermodynamic properties of the ABr–CeBr3 (A=Li–Cs ) systems
928
Modelling of the thermodynamic properties of the water–ammonia mixture by three different approaches
929
Modelling of the three phase LLV region for ternary hydrocarbon mixtures with the Soave-Redlich-Kwong equation of state
930
Modelling of the three-dimensional creep behavior of non-reinforced thermoplastics
931
Modelling of the transport of methane and higher hydrocarbons in fusion devices
932
Modelling of the tumor growth under oncolytic virotherapy with piecewise differential operators: The effects of combinations of specialist viruses
933
Modelling of the variant selection mechanism in the phase transformation of HSLA steel produced by compact strip production Original Research Article
934
Modelling of the Vickers hardness of paint coatings deposited on metallic substrates
935
Modelling of thermal and flow stratification for reactor pressure vessel pressurised thermal shock Original Research Article
936
Modelling of thermal conductivity of porous materials: application to thick thermal barrier coatings
937
Modelling of thermal desorption of hydrogen from metals
938
Modelling of thermal desorption of hydrogen from metals
939
Modelling of thermal energy storage in industrial energy systems the method development of MIND
940
Modelling of thermal phenomena in electric arc during surfacing
941
Modelling of thermal pressure forming of starch-based materials Original Research Article
942
Modelling of thermal removal of tars in a high temperature stage fed by a plasma torch
943
Modelling of thermal response of oil-heated tools due to different flow rates for the manufacture of composite structures
944
Modelling of thermal shock experiments of carbon based materials in JUDITH
945
Modelling of thermally detected optical absorption and luminescence of (In,Ga)N/GaN heterostructures
946
Modelling of thermally enhanced erosion of beryllium
947
Modelling of thermochemical plumes and implications for the origin of the Siberian traps
948
Modelling of thermomechanical fatigue stress relaxation in a single-crystal nickel-base superalloy
949
Modelling of Thin Elastic Plates with Small Piezoelectric Inclusions and Distributed Electronic Circuits. Models for Inclusions that Are Small with Respect to the Thickness of the Plate
950
MODELLING OF THIN LAYER DRYING KINETICS OF COCOA BEANS DURING ARTIFICIAL AND NATURAL DRYING
951
Modelling of thin layer drying kinetics of some fruits under open-air sun drying process Original Research Article
952
Modelling of thin layer drying of parsley leaves in a convective dryer and under open sun Original Research Article
953
Modelling of thin-film silicon solar cells
954
Modelling of thin-layer drying kinetics of red chillies Original Research Article
955
Modelling of Thrace Basin, NW Turkey using gravity and magnetic anomalies with control of seismic and borehole data
956
Modelling of Three-dimensional Air Temperature Distributions in Porous Media
957
Modelling of three-dimensional jet array impingement and heat transfer on a concave surface
958
Modelling of three-dimensional mechanical systems using point coordinates with a recursive approach
959
Modelling of three-dimensional temperature field inside the mould during continuous casting of steel
960
Modelling of three-layered piezoelectric plates
961
Modelling of thunderclouds and lightning generation on Titan
962
Modelling of tide and surge elevations in the Solent and surrounding waters: The importance of tide–surge interactions
963
Modelling of time related drying changes on matte coated paper with artificial neural networks
964
Modelling of time resolved and long contact time dissolution studies of spent nuclear fuel in 10 mM carbonate solution – A comparison between two different models and experimental data
965
Modelling of time-dependent behavior of the basal sliding surface of the إknes rockslide area in western Norway
966
Modelling of time-dependent biome shifts under global climate changes
967
Modelling of time-dependent biome shifts under global climate changes
968
Modelling of tonal noise control from subsonic axial fans using flow control obstructions
969
Modelling of tornado and microburst-induced wind loading and failure of a lattice transmission tower
970
Modelling of traffic flow and air pollution emission with application to Hong Kong Island
971
Modelling of transient liquid phase bonding in binary systems—A new parametric study
972
Modelling of transient moisture concentration of semolina pasta during air drying Original Research Article
973
Modelling of transient temperature fields during filling stage of powder injection moulding
974
Modelling of transport and biogeochemical processes in pollution plumes: literature review and model development
975
Modelling of transport and biogeochemical processes in pollution plumes: Vejen landfill, Denmark
976
Modelling of transport and dispersion of arbitrary-density particles in turbulent flows
977
Modelling of transport phenomena in laser surface alloying with distributed species mass source
978
Modelling of transport processes in soils at various scales in space and time: J. Feyen and K. Wiyo (Eds.), Wageningen Pers, Wageningen, The Netherlands, 1999. Softcover 794 pp. US$ 149. ISBN 90-74134-76-9
979
Modelling of transport properties and state of water of polyelectrolytes containing various amounts of water
980
Modelling of Transportation Policies to Encourage Shifting from Private Car to the Public Transport Usage in Putrajaya
981
MODELLING OF TRANSVERSE VIBRATION OF SHORT BEAMS FOR CRACK DETECTION AND MEASUREMENT OF CRACK EXTENSION
982
Modelling of tree crowns with realistic morphological features: New reconstruction methodology based on Iterated Function System tool
983
Modelling of tree crowns with realistic morphological features: New reconstruction methodology based on Iterated Function System tool
984
Modelling of Trickle Bed Reactor for the Catalytic Wet Air Oxidation of Phenol
985
Modelling of tritium retention and target lifetime of the ITER divertor using the ERO code
986
Modelling of trona based spray dry scrubbing of SO2
987
Modelling of tropical greenhouse temperature by auto regressive and neural network models
988
Modelling of Tsunami Waves
989
Modelling of tubes subjected to axial crushing
990
Modelling of Tudung Saji Weaving Using Elements in Group Theory
991
Modelling of turbulent gas-particle flows with focus on two-way coupling effects on turbophoresis
992
Modelling of turbulent mixing at the shelf edge
993
Modelling of turbulent molten pool convection in laser welding of a copper–nickel dissimilar couple
994
Modelling of turbulent scalar transport in homogeneous turbulence
995
Modelling of TWIP effect on work-hardening
996
Modelling of TWIP effect on work-hardening
997
MODELLING OF TWO PHASE FLOW PRESSURE DROP OF REFRIGERANT MIXTURES UNDER LIQUID/GAS INJECTION CONDITIONS
998
Modelling of two wave mixing experiments in sillenite crystals Original Research Article
999
Modelling of two-dimensional spatial effects on the spread of forest pests and their management
1000
Modelling of two-dimensional spatial effects on the spread of forest pests and their management
