<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis of the oxidation products of cis- and trans-octadecenoate methyl esters by capillary gas chromatography–ion-trap mass spectrometry: I. Epoxide and dimeric compounds
2
Analysis of the oxido-redox status of plasma proteins. Technology advances for clinical applications
3
Analysis of the oxygen impurity atoms beneath the surface of Cz-silicon by CPAA
4
Analysis of the oxygen potential of Th1−yUyO2+x
5
Analysis of the ozonation of 2-mercaptobenzothiazole in water and tannery wastewater using sum parameters, liquid- and gas chromatography and capillary electrophoresis
6
Analysis of the p16INK4 and TP53 tumor suppressor genes in bone sarcoma pediatric patients
7
Analysis of the p16INK4, p14ARF, p15, TP53, and MDM2 Genes and Their Prognostic Implications in Osteosarcoma and Ewing Sarcoma
8
Analysis of the p53 gene mutations in patients with multiple primary cancers of the oesophagus
9
Analysis of the P53, RB/D13S25, and P16 Tumor Suppressor Genes in Marginal Zone B-cell Lymphoma: An Interphase Fluorescence In Situ Hybridization Study
10
Analysis of the Pain Relief Effect of Walking Backwards Down on a Steep Slope in Patients with Plantar Fasciitis
11
Analysis of the Paradox Valley brine desulfation by nanofiltration Original Research Article
12
Analysis of the parallel packet switch architecture
13
Analysis of the paramagnetic spin–orbit transmission mechanism for NMR spin–spin coupling constants using the paramagnetic spin–orbit density distribution
14
Analysis of the parameter identifiability of the in situ diffusion and retention (DR) experiments
15
Analysis of the Parameter-Dependent Multiplicity of Steady-State Profiles of a Strongly Nonlinear Mathematical Model Arising From the Chemical Reactor Theory
16
Analysis of the parameters affecting energy consumption of a rotary kiln in cement industry
17
Analysis of the Parameters Affecting Warping In Radial Forging Process
18
Analysis of the parasitic copepod species richness among Mediterranean fish
19
Analysis of the participant solutions of the first Student International Olympiad on Mechanism and Machine Science
20
Analysis of the particulate emissions and combustion performance of a direct injection spark ignition engine using hydrogen and gasoline mixtures
21
Analysis of the partitioned frequency-domain block LMS (PFBLMS) algorithm
22
Analysis of the partnership network in the clean development mechanism
23
Analysis of the passive surface film on a graphite electrode charged in polysiloxane-based electrolyte
24
Analysis of the Patient Information Quality and Readability on Esophagogastroduodenoscopy (EGD) on the Internet
25
Analysis of the Patients Who Admitted To A Turkish Emergency Department During COVID-19 Pandemic
26
Analysis of the pattern of maxillofacial fractures in Kaduna, Nigeria
27
Analysis of the Pattern of Poisoning in Patients Admitted to a Large Teaching Hospital in Iran
28
Analysis of the Peach Bottom flow stability test number 3 using the coupled RELAP5/PARCS code
29
Analysis of the percentage voids of test and field specimens using computerized tomography
30
Analysis of the percentage voids of test and field specimens using computerized tomography
31
Analysis of the perception and representation of sonic public spaces through on site survey, acoustic indicators and in-depth interviews
32
Analysis of the perception-action cycle for visually induced postural sway in 9-month-old sitting infants
33
Analysis of the perforation process of steel strips used in automotive industry
34
Analysis of the performance of a multi-bed adsorption heat pump using a solid-side resistance model
35
Analysis of the performance of a sintered stainless steel wire mesh filter for cryogenic liquid purification Original Research Article
36
Analysis of the performance of an anaerobic digestion system at the Regina wastewater treatment plant
37
Analysis of the performance of DFT-D, M05-2X and M06-2X functionals for studying π⋯π interactions
38
Analysis of the performance of different classifiers in solving the credit risk scoring problem with noisy and clean data
39
Analysis of the performance of domestic lighting lamps
40
Analysis of the performance of dynamic multicast routing algorithms
41
Analysis of the performance of induction watthour meters in the presence of harmonics (a new model approach)
42
Analysis of the performance of interferometry, surface plasmon resonance and luminescence as biosensors and chemosensors Review Article
43
Analysis of the Performance of Nursing Schools in Iran in the Pahlavi Era; A Case Study of Isfahan (1925- 1979)
44
Analysis of the performance of subcarrier multiplexed (SCM) optical systems
45
Analysis of the performance of symbols of cement companies in the Tehran Stock Exchange, using data envelopment analysis based on integer indices
46
Analysis of the performance of the MONOLITH prototype
47
Analysis of the performance of the MONOLITH prototype
48
ANALYSIS OF THE PERFORMANCE OF THE ROTOPRESS COMBI AGRONIC R-500 IN THE PREPARATION OF LUCERNE
49
Analysis of the performance parameters of lead/acid batteries in photovoltaic systems
50
Analysis of the performances of the first-order two-state Markov model using solar radiation properties
51
ANALYSIS OF THE PERIODIC PRESSURE FLUCTUATIONS INDUCED BY FLOW OVER A CAVITY
52
Analysis of the permanence of an SIR epidemic model with logistic process and distributed time delay
53
ANALYSIS OF THE PERSONALITY TRAITS OF MEDALIST AND NON MEDALIST ATHLETES
54
Analysis of the perturbation of phospholipid model membranes by a multiple antigenic peptide
55
Analysis of the Petri net model of parallel manufacturing processes with shared resources
56
Analysis of the pH of daily rainfall at a rural site in Hong Kong, 1989–1993
57
Analysis of the phase content and Zr:Ti fluctuation phenomena in PZT sol-gel films with a nominal composition near the morphotropic phase boundary
58
Analysis of the phase transition behaviors of PMMA and PVAc blends using quartz crystal analyzer
59
Analysis of the Phebus FPTO containment thermal hydraulics with the Jericho and Trio-VF codes Original Research Article
60
Analysis of the phenotype and phagocytic activity of monocytes/macrophages from cattle infected with the bovine leukaemia virus
61
Analysis of the phenotype and phagocytic activity of monocytes/macrophages from cattle infected with the bovine leukaemia virus
62
Analysis of the phenotypes of Jurkat clones with different TRAIL-sensitivities
63
Analysis of the Photo Conversion of Asphaltenes Using Laser Desorption Ionization Mass Spectrometry: Fragmentation, Ring Fusion, and Fullerene Formation
64
Analysis of the Photoacoustic Detector Signal for Thermal Diffusivities of Gases
65
Analysis of the photo–damaging performance of persian “orosi” in carpeted and non–carpeted spaces
66
Analysis of the Photoneutron Yield and Thermal Neutron Flux in an Unreflected Electron Accelerator-Driven Neutron Source
67
Analysis of the photovoltaic solar energy capacity of residential rooftops in Andalusia (Spain)
68
Analysis of the physical and functional parameters of older adults with chronic venous disease
69
Analysis of the physical Laplacian and the heat flow on a locally finite graph
70
Analysis of the physical properties of an in-vessel composting matrix
71
Analysis of the physical properties of developing cotton fibres
72
Analysis of the physical stability of PCM slurries
73
Analysis of the Physicochemical Burden of Oyo State Fish Pond, Ibadan, Southwest Nigeria
74
Analysis of the physicochemical properties and grain yield of some rice promising lines from multiple crosses
75
Analysis of the physiological responses of the plane and willow trees against air pollution in Tehran .
76
Analysis of the Phytochemical Contents and Anti-microbial Activity of Ocimum basilicum L.
77
Analysis of the Pierre Auger fluorescence data
78
Analysis of the Pierre Auger fluorescence data
79
Analysis of the Piezoelectric Photothermal Spectra of Cd 1-xMnxTe Mixed Crystals
80
Analysis of the pion–pion scattering data and rho-like mesons Original Research Article
81
Analysis of the plant growth regulator chlormequat in soil and water by means of liquid chromatography–tandem mass spectrometry, pressurised liquid extraction, and solid-phase extraction
82
Analysis of the plasma produced by pulsed reactive crossed-beam laser ablation of La0.6Ca0.4CoO3
83
Analysis of the plastic anisotropy and pre-yielding of (γ/α2)-phase titanium aluminide microstructures by crystal plasticity simulation
84
Analysis of the Plastic Deformation Micrononuniformity Effect on the Strain Resistance of the Metal
85
Analysis of the plastic zone size ahead of repaired cracks with bonded composite patch of metallic aircraft structures
86
Analysis of the plume expansion from laser ablated SmBaCuO target
87
Analysis of the point mechanical impedance of fingerpad in vibration
88
Analysis of the polarization of a direct methanol fuel cell using a pseudo-reversible hydrogen reference electrode
89
Analysis of the polarization state of melt-spun polypropylene fibers
90
Analysis of the Policy-Making Gap in the Hoteling Quality Promotion of the Health System Development Plan in Providing Laboratory Services in Hospitals Affiliated with the Golestan University of Medical Sciences, Iran
91
Analysis of the polymorphic transformation of nano- and microcrystalline zirconia doped with CaO and MgO during reaction-sintering process by neutron thermodiffraction. A thermodynamic approach
92
Analysis of the polymorphisms in the caprine PRDM16, SHH and SF-1 genes and their association with production traits in goats
93
Analysis of the polypropylene mechanical behaviour response: Experiments and numerical modeling
94
Analysis of the polysaccharide components of the lipopolysaccharide fraction of Pseudomonas caryophylli
95
Analysis of the population dynamics of Acacia trees in the Negev desert, Israel with a spatially-explicit computer simulation model
96
Analysis of the population dynamics of Acacia trees in the Negev desert, Israel with a spatially-explicit computer simulation model
97
Analysis of the pore structure of the MCM-41 materials
98
Analysis of the porewater chemical composition of a Spanish compacted bentonite used in an engineered barrier
99
Analysis of the Position of Architectural Spatial Elements in Children’s Mental Image
100
Analysis of the Position of Women's Education in Iran during the Past One Hundred Years; An Interdisciplinary Approach
101
Analysis of the positions of substitution of acetate and butyrate groups in cellulose acetate–butyrate by the reductive-cleavage method
102
Analysis of the positions of substitution of acetate and propionate groups in cellulose acetate–propionate by the reductive-cleavage method
103
Analysis of the post-buckling behavior of a purlin built from thin-walled cold-formed C profile
104
Analysis of the posterior for spline estimators in logistic regression
105
Analysis of the postulated interaction between the angiotensin II sub-type 1 receptor gene A1166C polymorphism and the insertion/deletion polymorphism of the angiotensin converting enzyme gene on risk of myocardial infarction
106
Analysis of the potato glycoalkaloids by using of enzyme biosensor based on pH-ISFETs
107
Analysis of the potential allergenicity of traditional apple cultivars by Multiplex Biochip-Based Immunoassay
108
Analysis of the Potential Associations of Two Common Polymorphisms in the ABCC1 Three Prime Untranslated Region With Breast Cancer Susceptibility
109
analysis of the potential associations of two common polymorphisms in the abcc1 three prime untranslated region with breast cancer susceptibility
110
Analysis of the potential carcinogenicity of coffee and its related compounds in a medium-term liver bioassay of rats
111
Analysis of the Potential for Height Growth at Different Stages of Puberty Based on Bone Age in Healthy Girls
112
Analysis of the potential for hydrogen production in the province of Cَrdoba, Argentina, from wind resources
113
Analysis of the potential for spatial redistribution of freight using mathematical programming
114
Analysis of the potential functional diversity of the bacterial community in soil: a reproducible procedure using sole-carbon-source utilization profiles
115
Analysis of the potential production and the development of bioenergy in the province of Mendoza – Bio-fuels and biomass – Using geographic information systems
116
Analysis of the potentials of multi criteria decision analysis methods to conduct sustainability assessment
117
Analysis of the power blackout of June 8, 1995 in the Israel Electric Corporation
118
Analysis of the Power Delivery Path From the 12-V VR to the Microprocessor
119
Analysis of the power input needed to propagate multiple hydraulic fractures
120
Analysis of the Power Spectral Deviation of the General Transfer Function GSC
121
Analysis of the precipitation behaviour in a high-speed steel by means of small-angle neutron scattering
122
Analysis of the precipitation behaviour in a high-speed steel by means of small-angle neutron scattering
123
Analysis of the precipitation process of secondary phase MgNi2.5B2 and superconducting properties in Ni-doped MgB2 bulk
124
Analysis of the precipitation process of the intermetallic phases in a high-temperature Fe–Ni austenitic alloy
125
Analysis of the prediction capacity of a categorization method for urban noise assessment
126
Analysis of the predictive ability of the components of economic value added in predicting next periodʹs operating profit: Evidence from Iran
127
Analysis of the prescribed burning practice in the pine forest of northwestern Portugal
128
Analysis of the presence of improper materials in the composting process performed in ten MBT plants
129
Analysis of the pressure fluctuations in binary solids circulating fluidized bed
130
Analysis of the pressure-induced potential arising across selective multilayer membranes
131
Analysis of the Prevalence and Trend in Biopsy-Proven Native Kidney Diseases in Iranian Population: A 12-year Survey from a Referral Center
132
Analysis of the Prevalence of Cardiovascular Disease and Associated Risk Factors for European-American and African-American Populations in the State of Pennsylvania 2005–2009
133
Analysis of the Prevalence of Lumbar Annular Tears in Adult Patients Using Magnetic Resonance Imaging Data
134
Analysis of the Prime Minster Abdulla Hamdok’s Speech from Rhetoric and Linguistic Perspective
135
Analysis of the principal components for REEL spectra of indium
136
analysis of the problem based learning syntax in vocational mathematics books on matrix material
137
ANALYSIS OF THE PROCESS OF ABRASIVE WEAR UNDER EXPERIMENTAL CONDITIONS
138
Analysis of the process of anodization with AFM
139
Analysis of the process of anodization with AFM
140
Analysis of the process of anodization with AFM
141
Analysis of the process of biomass harvesting with collecting-chippers fed by pick up headers in plantations of olive trees
142
Analysis of the process of crack initiation and evolution in concrete with acoustic emission testing
143
Analysis of the Process of Explosion Braze-Welding of Heat Exchanger Tube Plates
144
Analysis of the process parameters effect on the thickness distribution and thinning ratio in single point incremental forming process
145
Analysis of the processes in spent fuel pools of Ignalina NPP in case of loss of heat removal Original Research Article
146
Analysis of the prodiginine biosynthesis gene cluster of Streptomyces coelicolor A3(2): new mechanisms for chain initiation and termination in modular multienzymes Original Research Article
147
Analysis of the product granulometry, temperature and mass flow of an industrial multichamber fluidized bed urea granulator
148
Analysis of the production of ATLAS indium bonded pixel modules
149
Analysis of the production of ATLAS indium bonded pixel modules
150
Analysis of the production stability of mixed grasslands: I: A conceptual framework for the qualification of production stability in grassland ecosystems
151
Analysis of the production stability of mixed grasslands: I: A conceptual framework for the qualification of production stability in grassland ecosystems
152
Analysis of the production stability of mixed grasslands: II: A mathematical framework for the quantification of production stability in grassland ecosystems
153
Analysis of the production stability of mixed grasslands: II: A mathematical framework for the quantification of production stability in grassland ecosystems
154
Analysis of the production variability in multi-stage manufacturing systems
155
Analysis of the Products Contained in Two Roman GlassUnguentariafrom the Colony ofCelsa(Spain)
156
Analysis of the profiles of the argon 696.5 nm spectral line excited in non-stationary wave-guided discharges
157
Analysis of the progesterone displacement of its human serum albumin binding site by β-estradiol using biochromatographic approaches: effect of two salt modifiers
158
Analysis of the progress to detachment in the divertor of the MAST tokamak
159
Analysis of the progression of JAK2 V617F positive myeloproliferative neoplasms by single-nucleotide polymorphism array does not reveal a strong chromosomal instability
160
Analysis of the promotion of CoMoP/Al2O3 HDS catalysts prepared from a reduced H–P–Mo heteropolyacid Co salt
161
Analysis of the Prompt Release of the Detained Violator Vessels Based on the Current Judicial Procedure and Domestic and International Law
162
Analysis of the propagation different wavelengths (632.8, 785, and 1330 nm) in Free Space Laser Link at Babylon City
163
Analysis of the propagation of neutrons and gamma-rays from the fast neutron source reactor YAYOI
164
Analysis of the propagation of the femtosecond laser pulse in the scattering medium Original Research Article
165
Analysis of the Properties of Carbon Nanotubes from Distribution Maps of Molecular Electrostatic Potential
166
Analysis of the properties of exergy and biodiversity along an estuarine gradient of eutrophication
167
Analysis of the properties of exergy and biodiversity along an estuarine gradient of eutrophication
168
Analysis of the properties of silicone rubber maxillofacial prosthetic materials
169
Analysis of the Properties of Super Solar Proton Events and Associated Phenomena
170
Analysis of The Prospects of a Small Enterprise for The Production of Bakery Products in Russia, Taking into Account Current Market Problems and Chemical Health Risk
171
Analysis of the protein complex associated with 14-3-3 epsilon by a deuterated-leucine labeling quantitative proteomics strategy
172
Analysis of the proteins and peptides isolated from incubation medium of early equine conceptuses - preliminary results
173
Analysis of the pseudoelastic behavior of a SMA beam by the element-free Galerkin method
174
Analysis of the PSPG method for the transient Stokes’ problem
175
Analysis of the Psychological Impact of Problem Based Learning (PBL) towards Self Directed Learning among Students in Undergraduate Medical Education
176
Analysis of the pulse shape mechanism in a plastic scintillator with efficient neutron/gamma pulse shape discrimination
177
Analysis of the pulse shape mechanism in a plastic scintillator with efficient neutron/gamma pulse shape discrimination
178
Analysis of the Pulsed Electro-acoustic signal treatment recorded on electron beam irradiated dielectrics
179
Analysis of the pyrolysis and combustion of different sewage sludges by TG
180
Analysis of the quality of life of patients with asthma and allergic rhinitis after immunotherapy
181
Analysis of the Quality of Light Obtained from the Stained Glass Windows of Traditional Iranian Architecture based on the Color Temperature Curve (CIE)
182
Analysis of the quality of protection induced by a porcine influenza A vaccine to challenge with an H3N2 virus
183
Analysis of the quality of protection induced by a porcine influenza A vaccine to challenge with an H3N2 virus
184
Analysis of the Quaternary Structure of the MutL C-terminal Domain
185
Analysis of the Query Logs of a Web Site Search Engine
186
Analysis of the QUESTOR water quality model using a Fourier amplitude sensitivity test (FAST) for two UK rivers
187
Analysis of the queue-length distribution for the discrete-time batch-service Geo/Ga,Y/1/K queue
188
Analysis of the Quiescent Low-Mass X-Ray Binary Population in Galactic Globular Clusters
189
Analysis of the radial and longitudinal effects of a planar sample in a single TE102 rectangular electron paramagnetic resonance (EPR) cavity
190
Analysis of the radial and longitudinal effects of a planar sample in a single TE102 rectangular electron paramagnetic resonance (EPR) cavity Original Research Article
191
Analysis of the radial flow assumption in a converging model silo
192
Analysis of the radiative properties of insulating and conducting granular polymers and of their mixtures
193
Analysis of the radiometer—reference load system on board the Planck/LFI instrument
194
Analysis of the radiometer—reference load system on board the Planck/LFI instrument
195
Analysis of the railway heave induced by soil swelling at a site in southern France
196
Analysis of the RATAN-600 radiotelescope antenna with a multilevel Physical Optics algorithm
197
Analysis of the rational long-term herbicide use: Evidence for herbicide efficacy and critical weed kill rate as key factors
198
Analysis of the reaction network for the Rh-catalyzed hydroformylation of 1-dodecene in a thermomorphic multicomponent solvent system Original Research Article
199
Analysis of the reaction paths to dissociation of dichloro-ethylenes into Cl2 and C2H2 Original Research Article
200
ANALYSIS OF THE REACTIVE PROPERTIES OF THE DYNAMIC STIFFNESSES AND TRANSFER FUNCTIONS OF HYDROMOUNTS
201
ANALYSIS OF THE REACTIVE PROPERTIES OF THE DYNAMIC STIFFNESSES AND TRANSFER FUNCTIONS OF HYDROMOUNTS
202
ANALYSIS OF THE REACTIVE PROPERTIES OF THE DYNAMIC STIFFNESSES AND TRANSFER FUNCTIONS OF HYDROMOUNTS WITH INTERMEDIATE MASSES
203
Analysis of the reactivity coefficients of the advanced high-temperature reactor for plutonium and uranium fuels
204
Analysis of the real estate market in Las Vegas: Bubble, seasonal patterns, and prediction of the CSW indices
205
Analysis of the reasons for exclusion from tPA therapy after early arrival in acute stroke patients
206
ANALYSIS OF THE REASONS FOR INCIDENTS WITH RADIOACTIVE SOURCES IN BULGARIA AND PREVENTIVE MEASURES
207
Analysis of the recent antipsychotic aripiprazole in human plasma by capillary electrophoresis and high-performance liquid chromatography with diode array detection Original Research Article
208
Analysis of the recent storm record in the southwestern Spanish coast: implications for littoral management
209
Analysis of the recuperative gas turbine cycle with a recuperator located between turbines
210
Analysis of the redox reaction of 9,10phenanthrenequinone on a gold electrode surface by cyclic voltammetry and time-resolved Fourier transform surface-enhanced Raman scattering spectroscopy
211
Analysis of the redox reaction of 9,10-phenanthrenequinone on a gold electrode surface by cyclic voltammetry and time-resolved Fourier transform surface-enhanced Raman scattering spectroscopy Original Research Article
212
Analysis of the reference accidental sequence for safety assessment of LLCB TBM system
213
Analysis of the Reflection Properties in Electromagnetic Bandgap Coplanar Waveguides Loaded with Reactive Elements
214
Analysis of the regenerative H2S poisoning mechanism in Ce0.8Sm0.2O2-coated Ni/YSZ anodes for intermediate temperature solid oxide fuel cells
215
Analysis of the rejuvenation performance of hybrid blankets by using uranium fuels (UN, UC, UO2, U3Si2) and different coolants for various volume fraction
216
Analysis of the Related Factors in Hepatitis C Virus Infection Among Hemophilic Patients in Isfahan, Iran
217
Analysis of the relation between injection parameter variation and block vibration of an internal combustion diesel engine
218
Analysis of the relation between stent implantation pressure and expansion
219
Analysis of the Relationship among Kidney Volume, Obesity, and Blood Pressure in Mexican-American Children
220
Analysis of the Relationship between "Agricultural Information System Members' Viewpoint towards Organic Products" and "their Environmental Attitude": the Case of the Central District of Boyer-ahmad County
221
Analysis of the Relationship between Agenda Setting Theory and Knowledge and Information Science
222
Analysis of the relationship between ambient levels of O3, NO2 and NO as a function of NOx in the UK
223
Analysis of the relationship between bare soil evaporation and soil moisture simulated by 13 land surface schemes for a simple non-vegetated site
224
Analysis of the relationship between citation frequency of patents and diversity of their backward citations for Japanese patents
225
Analysis of the Relationship Between Dimensions and Indicators of Web Marketing; Iran and Spain Football Clubs Target Market
226
Analysis of the Relationship Between Ethical Leadership and Cooperative Social Responsibility and the Organization s Moral Climate
227
Analysis of the relationship between flooding area and water height in the Logone floodplain
228
Analysis of the relationship between health-related quality of life and social capital of rural people: an evidence from Iran
229
Analysis of the relationship between international cooperation and scientific publications in energy R&D in China
230
Analysis of the Relationship between Leadership Styles and Affective Organizational Commitment
231
Analysis of the relationship between liquid droplet size and contact angle
232
Analysis of the relationship between liver regeneration rate and blood levels
233
Analysis of the relationship between MODIS aerosol optical depth and particulate matter from 2006 to 2008
234
Analysis of the Relationship between Organizational Communications and Organizational Salience (A Study on University of Isfahan)
235
Analysis of the relationship between parameters of resistance to Fusarium head blight and in vitro tolerance to deoxynivalenol of the winter wheat cultivar WEK0609 ®
236
Analysis of the relationship between particle size distribution of α-calcium sulfate hemihydrate and compressive strength of set plaster—Using grey model
237
Analysis of the relationship between photosynthetic photon flux density and natural Taxus baccata seedlings occurrence
238
Analysis of the Relationship between Self Esteem, Trait Anger and Anger Expression in Athletes Making Team Sports
239
Analysis of the Relationship between Self-Control and Social Desirability with the Ethical Report of Banking Delinquency (With Emphasis on Demographic Characteristics of Employees
240
Analysis of the Relationship between Shared Leadership and Distributed Leadership
241
Analysis of the Relationship Between Social Networking Site (SNS) Addiction and Nomophobia in Iranian Higher Education Students
242
Analysis of the Relationship between Sport Injury Anxiety Level and Multi Domain Decisiveness in Football Players Who Participate in University Games
243
Analysis of the Relationship between the Business Cycle and Inflation Gap in Time-Frequency Domain
244
Analysis of the relationship between the kink effect and the indium levels in MOS transistors
245
Analysis of the relationship between the spectral characteristics of maize canopy and leaf area index under drought stress
246
Analysis of the relationship between triglyceridemia and HDL-phospholipid concentrations: consequences on the efflux capacity of serum in the Fu5AH system
247
Analysis of the relationship between umbilical cord placental morphology and anthropometric measurements of the newborn
248
Analysis of the relationships between climate variability and grapevine phenology in the Nobile di Montepulciano wine production area
249
Analysis of the relationships between clinicopathologic factors and survival time in intrahepatic cholangiocarcinoma
250
Analysis of the Relationships between Mean Red Blood Cell Volume, Red Blood Cell Distribution Width and Hypotension in Patients with Hemodialysis
251
Analysis of the relationships between strain, polarity and population slope for normal fault systems
252
ANALYSIS OF THE RELATIONSHIPS BETWEEN THE HOSPITALITY WORKFORCE AND JOB-SATISFACTION FACTORS ACCORDING TO AGE, GENDER, NATIVE LANGUAGE, AND RACIAL-ETHNICITY
253
Analysis Of The Relationships Of Infrastructural Facilities In The Determination Of Rental Values Of Residential Properties In Akure, Nigeria
254
Analysis of the Relative Costs and Effectiveness of Primary Angioplasty Versus Tissue-Type Plasminogen Activator: The Primary Angioplasty in Myocardial Infarction (PAMI) Trial
255
Analysis of the relative decay constants of 235U and 238U by multi-step CA-TIMS measurements of closed-system natural zircon samples
256
Analysis of the Relevant Factors for the Engaging Women in Various Sports in Croatia
257
Analysis of the Relevant Factors of Retaining Women in Judo
258
Analysis of the reliability of a statistical oil spill response model
259
ANALYSIS OF THE RELIABILITY OF A THREE-COMPONENT SYSTEM WITH TWO REPAIRMEN
260
Analysis of the Reliability of the Dissected Frame of Heavy Equipment
261
Analysis of the removal of lead(II) from aqueous solutions by adsorption onto insolubilized humic acid: temperature and pH dependence
262
Analysis of the removal of lead(II) from aqueous solutions by adsorption onto insolubilized humic acid: temperature and pH dependence Original Research Article
263
Analysis of the repertoire of cattle CD4+ T cells reactive with bovine viral diarrhoea virus
264
Analysis of the repertoire of cattle CD4+ T cells reactive with bovine viral diarrhoea virus
265
Analysis of the reporting of search strategies in Cochrane systematic reviews
266
Analysis of the reservoir electrofacies in the framework of hydraulic flow units in the Whicher Range Field, Perth Basin, Western Australia
267
Analysis of the residence time distribution in large flotation machines
268
Analysis of the Resident Physician Program from Theory to Practice from the Perspective of Service Providers: A Qualitative Study
269
Analysis of the residential location choice and household energy consumption behavior by incorporating multiple self-selection effects
270
Analysis of the residual stress and bonding mechanism in the cold spray technique using experimental and numerical methods
271
Analysis of the Residual Stress around a Cold-expanded Fastener Hole in a Finite Plate
272
Analysis of the resistance of two-dimensional holes in SiGe over a wide temperature range
273
Analysis of the resolution-bandwidth-noise trade-off in wavelengthbased photonic analog-to-digital converters
274
Analysis of the resonance and ways of its elimination at the descent of spacecrafts in the rarefied atmosphere
275
Analysis of the resonance in H+D2→HD (ν′=3) + D
276
ANALYSIS OF THE RESPONSE OF A CRACKED JEFFCOTT ROTOR TO AXIAL EXCITATION
277
Analysis of the response of a pacemaker neuron model to transient inputs
278
Analysis of the response of silicon detectors to α particles and 16O ions
279
Analysis of the response of silicon detectors to α particles and 16O ions
280
Analysis of the response surface of the objective function by the optimum parameter curve: how good can the optimum parameter values be?
281
Analysis of the response time in high-temperature LWIR HgCdTe photodiodes operating in non-equilibrium mode
282
Analysis of the responsibility of the representative of a foreign company in international contracts, a case study of shipbuilding
283
Analysis of the Results of Mechanical Testing of Metals by Constructing the Diagrams of Structural States
284
Analysis of the Results of Online Teachers’ Characteristics Questionnare
285
Analysis of the Results of Pulmonary Resection by Minimally Invasive Thoracoscopy for the Surgical Treatment of Lung Cancer
286
Analysis of the results of the international comparison of activity measurements of a solution of 55Fe
287
Analysis of the return to power scenario following a LBLOCA in a PWR Original Research Article
288
Analysis of the revolving vane (RV-0) expander, Part 1: Experimental investigations
289
Analysis of the Revolving Vane (RV-0) expander, part 2: Verifications of theoretical models
290
Analysis of the rheological behavior and stability of 316L stainless steel–TiC powder injection molding feedstock
291
Analysis of the Rice Mutant dwarf and gladius leaf 1. Aberrant Katanin-Mediated Microtubule Organization Causes Up-Regulation of Gibberellin Biosynthetic Genes Independently of Gibberellin Signaling
292
Analysis of the risk difference of marginal and conditional probabilities in an incomplete correlated 2×2 table
293
Analysis of the risk difference of marginal and conditional probabilities in an incomplete correlated 2×2 table
294
Analysis of the Risk Factors for the Recurrence of Ischemic Stroke with Diabetes Mellitus and Establishment of Cox’s Regression Model and the Personal Prognosis Index in Two Years of Follow-Up
295
Analysis of the risk of transmitting bovine spongiform encephalopathy through bone grafts derived from bovine bone
296
Analysis of the role of betL in contributing to the growth and survival of Listeria monocytogenes LO28
297
Analysis of the role of CD4+ T-cells during murine cytomegalovirus infection in different strains of mice
298
Analysis of the Role of Dispersion of Rural Settlements against Natural Hazards in South Khorasan Province
299
Analysis of the role of DOP on the particulate phosphatase activity in Toulon Bay (N.W. Mediterranean Sea, France)
300
Analysis of the Role of Female Entrepreneurs in Rural Economic Development (Case Study: Sowme eh Sara Rural Area in Northern Iran)
301
Analysis of the role of Mg2+ on conformational change and target recognition by Ciliate Euplotes octocarinatus centrin
302
Analysis of the role of p53 and Galectin-3 in proliferation and apoptosis of thyroid carcinoma cell lines by specific RNA interference experiments
303
Analysis of the role of sidewall vents on buoyancy-driven natural ventilation in parral-type greenhouses with and without insect screens using computational fluid dynamics
304
Analysis of the Role of Social Capital in the Spatial Evolution of Rural Settlements (Case Study: Esfandagheh District, Jiroft County)
305
Analysis of the role of the Islamic Revolution in constructing religious identity and preventing identity crisis
306
Analysis of the role of the Listeria monocytogenes F0F1-ATPase operon in the acid tolerance response
307
Analysis Of The Role Of Tourism And Its Impact On Rural Development (Case Study Of The Central Part Of Marivan )
308
Analysis of the role rural tourism in stable development (Case study of central parts of Soulghan villages)
309
Analysis of the roles of amino acid residues in the flavoprotein tryptophan 2-monooxygenase modified by 2-oxo-3-pentynoate: characterization of His338, Cys339, and Cys511 mutant enzymes
310
Analysis of the Roles of Cyclin B1 and Cyclin B2 in Porcine Oocyte Maturation by Inhibiting Synthesis with Antisense RNA Injection
311
Analysis of the Roles of Kinesin and Dynein Motors in Microtubule-Based Transport in the Caenorhabditis elegans Nervous System
312
Analysis of the roles of microporosity and BMP-2 on multiple measures of bone regeneration and healing in calcium phosphate scaffolds
313
Analysis of the roles of tRNA structure, ribosomal protein L9, and the bacteriophage T4 gene 60 bypassing signals during ribosome slippage on mRNA
314
Analysis of the rotary ultrasonic machining mechanism
315
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube
316
ANALYSIS OF THE ROTATIONAL PROPERTIES OF KUIPER BELT OBJECTS
317
Analysis of the rotational structure in bands in the high-resolution infrared spectra of butadiene and butadiene-2,3-d2: refinement in assignments of fundamentalsq
318
Analysis of the Rowlands uranium oxide pin-cell benchmark with an updated wims-d library
319
Analysis of the Rural Digital Literacy Policy in Iran
320
Analysis of the rural dwellings at new residential areas in The Southeastern Anatolia, Turkey
321
Analysis of the Salivary Microbiome in Obstructive Sleep Apnea Syndrome Patients
322
Analysis of the Salmonella typhimurium isolates from food-poisoning cases by molecular subtyping methods Original Research Article
323
Analysis of the salt retention of a titania membrane using the “DSPM” model: effect of pH, salt concentration and nature
324
Analysis of the sampling distribution in Monte Carlo Radiation Transport calculations
325
Analysis of the sandwich DCB specimen for debond characterization
326
Analysis of the Scabies Incidence at As’ad Islamic Boarding School, Jambi City
327
Analysis of the scale of errors in nearshore bathymetric data
328
Analysis of the scale up of a transpiring wall reactor with a hydrothermal flame as a heat source for the supercritical water oxidation
329
Analysis of the scaling laws for the turbulence driven panel responses
330
Analysis of the scapulohumeral rhythm and electromyography of the shoulder muscles during elevation and lowering: Comparison of dominant and nondominant shoulders
331
Analysis of the Schiphol Cell Complex fire using a Bayesian belief net based model
332
Analysis of the Schiphol Cell Complex fire using a Bayesian belief net based model
333
Analysis of the screening of hydrogen flares and flames thermal radiation with water sprays
334
Analysis of the sea-level variability along the Chinese coast and estimation of the impact of a CO2-perturbed atmospheric circulation
335
Analysis of the seasonal behavior of tropospheric ozone at Hong Kong
336
Analysis of the seasonal pattern in suicide
337
Analysis of the Seasonality of Births in a Large Cohort of Patients with Thyroid Hemiagenesis - A Preliminary Study
338
Analysis of the seawater CO2 system in the barrier reef-lagoon system of Palau using total alkalinity-dissolved inorganic carbon diagrams
339
Analysis of the second generation antidepressant venlafaxine and its main active metabolite O-desmethylvenlafaxine in human plasma by HPLC with spectrofluorimetric detection
340
Analysis of the second vorticity confinement scheme
341
Analysis of the Secondary Structure of Expansion Segment 39 in Ribosomes from Fungi, Plants and Mammals
342
analysis of the secondary vortices in rotating flow induced by a twisted tape inside a pipe
343
Analysis of the secondary vortices in rotating ow induced by a twisted tape inside a pipe
344
Analysis of the second-grade fluid flow in a porous channel by Cattaneo-Christov and generalized Fick's theories
345
Analysis of the secretion pattern of monocyte chemotactic protein-1 (MCP-1) and transforming growth factor-beta 2 (TGF-(beta)2) by human retinal pigment epithelial cells
346
Analysis of the seismic activity associated with the 2010 eruption of Merapi Volcano, Java
347
Analysis of the seismicity in the central part of the Pyrenees (France), and tectonic implications
348
Analysis of the self-oscillating series resonant inverter for electronic ballasts
349
Analysis of the self-similar solutions of the nonplanar Burgers equation Original Research Article
350
Analysis of the semi-geostrophic shallow water equations
351
Analysis of the sensible heat flux from the exterior surface of buildings using time sequential thermography
352
Analysis of the sensing mechanism of tin dioxide thin film gas sensors using the change of work function in flammable gas atmosphere
353
Analysis of the sensitivity and sample–furnace thermal-lag of a differential thermal analyzer
354
Analysis of the sensitivity of a vibration-based procedure for structural identification
355
Analysis of the sensitivity of FEM predictions to numerical parameters in deep drawing simulations
356
Analysis of the sensitivity to the systematic error in least-squares regression models
357
Analysis of the sensitivity to the systematic error in least-squares regression models Original Research Article
358
Analysis of the sensor characteristics of the Galileo dust detector with collimated Jovian dust stream particles
359
Analysis of the Ser786Pro Interleukin-4 Receptor α Allelic Variant in Allergic and Nonallergic Asthma and Its Functional Consequences
360
Analysis of the serum concentrations of kisspeptin and neurokinin B in the geese during reproductive cycle and their localisation in the ovary
361
Analysis of the sex chromosome constitution of sperm in men with a 47, XYY mosaic karyotype by fluorescence in situ hybridization
362
Analysis of the Shadow-Sausage Effect Caustic
363
Analysis of the shape of spectral dependence of absorption coefficient and stationary photoconductivity spectral response in nanocrystalline bismuth(III) sulfide thin films
364
Analysis of the shape of the tibial tray in total knee arthroplasty using a three dimension finite element model
365
Analysis of the shear and flexural behaviour of masonry with hollow calcium silicate blocks
366
Analysis of the shelf life of a two-solution bone cement
367
Analysis of the shift of zero-phonon lines for f–d luminescence of lanthanides in relation to the Dorenbos model
368
Analysis of the Short Form‑36 Questionnaire and Approbation of Proposals for Adaptation to the Kazakh Language
369
Analysis of the sidewall films formed during Si trench etching with photoresist mask in Cl rHBr-based plasma
370
Analysis of the silicon market: Will thin films profit?
371
Analysis of the simple harmonic oscillator with fractional damping
372
Analysis of the simultaneous catalytic combustion of chlorinated aliphatic pollutants and toluene over ceria-zirconia mixed oxides Original Research Article
373
Analysis of the simultaneous effects of renewable energy consumption and GDP, using Dynamic Panel Data
374
Analysis of the single-phase four-quadrant PWM converter resulting in steady-state and small-signal dynamic models
375
Analysis of the singular vectors of the full-physics Florida State University Global Spectral Model
376
Analysis of the singularity of spatial parallel manipulator with terminal constraints
377
Analysis of the site characteristics of Korean nuclear power sites from the meteorological aspects
378
Analysis of the site selected fluorescence and the phosphorescence spectrum of hypericin in ethanol
379
Analysis of the sit-stand-sit movement cycle in normal subjects
380
Analysis of the slip condition in magnetohydrodynamic (MHD) micropumps
381
ANALYSIS OF THE SLOVAK DISCOURSES OF SEX EDUCATION INSPIRED BY MICHEL FOUCAULT
382
Analysis of the slump test for on-site yield stress measurement of mineral suspensions
383
Analysis of the small amplitude sloshing of a liquid in a rigid container of arbitrary shape using a low-order boundary element method
384
Analysis of the small viscosity and large reaction coefficient in the computation of the generalized Stokes problem by a novel stabilized finite element method
385
Analysis of the Smartening Infrastructure Role on the Quality of Life of Suburban Rural Settlements (Case Study: Zabol City, Iran Southeast)
386
Analysis of the S–N curves of welded joints enhanced by ultrasonic peening treatment
387
Analysis of the snubberless operation of the emitter turn-off thyristor (ETO)
388
Analysis of the Social Characteristics of the Jews in the Holy Quran
389
Analysis of the Sodium Iodide Symporter Expression in Histological Slides from a Nodular Goiter
390
Analysis of the Soft Error Susceptibility and Failure Rate in Logic Circuits
391
Analysis of the soil and water assessment tool (SWAT) to model Cryptosporidium in surface water sources
392
Analysis of the solar neutrino data
393
Analysis of the solar neutrino data
394
Analysis of the solar wind flow during an activity cycle
395
Analysis of the solubility of betaine: calculation of descriptors and physicochemical properties
396
Analysis of the soluble cell wall proteome of gymnosperms
397
Analysis of the solution of the Sylvester equation using low-rank ADI with exact shifts
398
Analysis of the solution structure of Thermosynechococcus elongatus photosystem I in n-dodecyl-β-d-maltoside using small-angle neutron scattering and molecular dynamics simulation
399
Analysis of the solvent diffusion in glassy polymer films using a set inversion method
400
Analysis of the some effective teaching quality factors within faculty members of agricultural and natural resources colleges in Tehran University
401
Analysis of the Sound Field Characteristics of a Muffler at Different Flow Conditions
402
Analysis of the southeast Beni-Suef, northern Egypt earthquake sequence
403
Analysis of the Southern Caspian Sea Level Fluctuations from GRACE Gravimetric Satellite
404
Analysis of the Spaceflight Effects on Growth and Development of Super Dwarf Wheat Grown on the Space Station Mir
405
Analysis of the spallation mechanism suppression in plasma-sprayed TBCs through the use of heterogeneous bond coat architectures
406
Analysis of the Spanish scientific and technological output in the ICT sector
407
Analysis of the spatial and temporal distributions between successive earthquakes: Nonextensive statistical mechanics viewpoint
408
Analysis of the Spatial and Temporal Variability of Irrigated Maize Yield
409
Analysis of the spatial and temporal variations in the water quality of a karstic aquifer using UV spectrophotometry
410
Analysis of the spatial distribution of aerosol dispersions
411
Analysis of the spatial evolution of the 2003 algal bloom in the Voordelta (North Sea)
412
Analysis of the Spatial Planning Factors Affecting the Development Pattern of Second Home Tourism in the Forest Villages of Mazandaran Province
413
Analysis of the spatial structure of rigid polyphenylene dendrimers by small-angle neutron scattering
414
Analysis of the spatial structure of rural settlements Surrounding Urmia Lake’s Western Region
415
Analysis of the spatial uniformity of the combustion of a gaseous mixture initiated by a nanosecond discharge
416
Analysis of the spatial variation in the net ecosystem production of rice paddy fields using the diagnostic biosphere model, BEAMS
417
Analysis of the spatial variation in the net ecosystem production of rice paddy fields using the diagnostic biosphere model, BEAMS
418
Analysis of the spatial variation of heavy metals in the Guadiana Estuary sediments (SW Iberian Peninsula) based on GIS-mapping techniques
419
Analysis of the spatial-local distribution of the sport complexes using gis system (Case study: Kerman City)
420
Analysis of the spatially distributed performance degradation of a polymer electrolyte membrane fuel cell stack
421
Analysis of the spatio-temporal behaviour of beach morphology at Duck using fractal methods
422
Analysis of the Spatio–temporal Distribution of Helicoverpa armigera Hb. in a Tomato Field using a Stochastic Approach
423
Analysis of the spatiotemporal structure of rice sheath blight epidemics in a farmerʹs field
424
Analysis of the specific on-resistance of vertical high-voltage DMOSFETs on SOI
425
Analysis of the spectator-angular distribution in the light-nuclei reactions
426
Analysis of the spectrophotometric response of a nitrosyl complex generated within an electronic conducting polymer film
427
Analysis of the spectroscopic characteristics on the binding interaction between tosufloxacin and bovine lactoferrin
428
Analysis of the spectrum of a Cartesian Perfectly Matched Layer (PML) approximation to acoustic scattering problems
429
Analysis of the SPF of a titanium alloy at lower temperatures
430
Analysis of the Spin Exchange Interactions in the Extended Magnetic Solids K2NiF4, K2CuF4, La2CuO4, Nd2CuO4, KNiF3, and KCuF3
431
Analysis of the spin polarization of secondary electrons emitted from Au/Fe
432
Analysis of the spin-dipole transmission mechanism for NMR spin–spin coupling constants using orbital contributions, spin polarization, and spin-dipole energy density distribution
433
Analysis of the spray field development on a vertical surface during water spray-quenching using a flat spray nozzle
434
Analysis of the spreader track wheels premature damages
435
Analysis of the square wave voltammetry for reversible metal deposition on a foreign substrate – Experimental study of silver deposition on gold
436
Analysis of the stability and convergence of a finite difference approximation for stochastic partial differential equations
437
Analysis of the stability and function of nucleoplasmin through cysteine mutants
438
Analysis of the stability of a family of singular-limit linear periodic systems in . Applications
439
Analysis of the stability of high-solids anaerobic digestion of agro-industrial waste and sewage sludge
440
Analysis of the stability of water-jet cutting with linear theory
441
Analysis of the stable free radical scavenging capability of artificial polyphenol mixtures and plant extracts by capillary electrophoresis and liquid chromatography–diode array detection–tandem mass spectrometry
442
Analysis of the stages of the equilibrium interaction of 2,4,6-trinitrohalobenzenes with 4-[4-(dimethylamino)styryl]pyridine as a model for activated nucleophilic substitution
443
Analysis of the stagnant stage in diffusional phase transformations starting from austenite–ferrite mixtures
444
Analysis of the stains produced by metal particle tapes on helical scan heads in data recording applications
445
Analysis of the state of the art of blast-induced fragment conditioning
446
Analysis of the state of water in polyvinylpyrrolidone aqueous solutions using DSC method
447
Analysis of the statistical behavior of the genetic cluster-exact approximation
448
Analysis of the steady-state components in a balanced single-phase synchronous reluctance motor with a running capacitor
449
Analysis of the steady-state relations and control-algorithm characterisation in a mathematical model of cholesterol biosynthesis
450
Analysis of the steel frames with the semi-rigid beam-to-beam and beam-to-column knee joints under bending and axial forces
451
Analysis of the stereodynamics of 2,2′-disubstituted biphenyls by dynamic chromatography
452
Analysis of the stirling heat engine at maximum power conditions
453
Analysis of the strain field in the vicinity of a crack-tip in an in-plane isotropic paper material
454
Analysis of the strain transfer in a new FBG sensor for Structural Health Monitoring
455
Analysis of the Strategic Role of Public Libraries In Iran’s Geopolitics of Information
456
Analysis of the strength of hot inplace recycled asphalt, its affecting factors and its comparison with conventional methods
457
Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters
458
Analysis of the stress field in a threshold-galling test
459
Analysis of the stress raising action of flaws in laser clad deposits
460
Analysis of the stress response of yeast Saccharomyces cerevisiae toward pulsed electric field
461
Analysis of the stress singularity field at a vertex in 3D-bonded structures having a slanted side surface
462
Analysis of the Stress State at the Cogging Joint in Timber Structures
463
Analysis of the stress state of multilayer pressed joints
464
Analysis of the Stress State of the Surface Layer of a Polymeric Mass upon Filling of Bulky Compression Molds
465
Analysis of the stress states and interface damage in a particle reinforced composite based on a micromodel using cohesive elements
466
Analysis of the stressed state in equal-diameter T-joints of pipelines. Part 1. Action of internal pressure and bending moments in the plane of a T-joint
467
Analysis of the stressed state of a rectangular wedge loaded by a concentrated force
468
Analysis of the stressed state of bodies with multilayer thin coatings
469
Analysis of the stresses intensity factor in alumina–Pyrex composites
470
ANALYSIS OF THE STRESS-FOCUSING EFFECT IN A SOLID CYLINDER SUBJECTED TO INSTANTANEOUS HEATING BASED ON THE GENERALIZED THERMOELASTICITY
471
Analysis of the stress–permeability coupling property in water jet slotting coal and its impact on methane drainage
472
Analysis of the Stress-Strain Curves of a Fe-Mn-Si Shape Memory Alloy
473
Analysis of the stress-strain state of a rectangular orthotropic plate under the action of biaxial tension and shear
474
Analysis of the Stringency of Drinking Water Quality Standards of Bangladesh in Comparison to the USA, EU, Japanese, and Indian Standards
475
Analysis of the strong propensity for the delocalized diamagnetic π electronic structure of hydrogenated graphenes Original Research Article
476
Analysis of the structural and electronic properties of (fluoranthene)2PF6 and characterization of its (011) surface by scanning tunneling microscopy
477
Analysis of the structural and vibrational properties of RNA building blocks by means of neutron inelastic scattering and density functional theory calculations Original Research Article
478
Analysis of the structural behavior of the pelvis during lateral impact using the finite element method
479
Analysis of the structural heterogeneity of laminarin by electrospray-ionisation-mass spectrometry
480
Analysis of the structural properties of the solutions to speed gradient traffic flow model
481
Analysis of the Structural Relationship of Sports Participation and Ego-Resilience in the Health-Promoting Behavior of Korean Adolescents during the COVID-19 Pandemic
482
Analysis of the structural reliability of dental filling under the effect of mouthwash G.U.M
483
Analysis of the structure and chemical properties of some commercial carbon nanostructures Original Research Article
484
Analysis of the Structure and Conformational States of DewA Gives Insight into the Assembly of the Fungal Hydrophobins
485
Analysis of the structure and deformation of a woven composite lamina using X-ray microdiffraction
486
Analysis of the structure and expression pattern of MRP7 (ABCC10), a new member of the MRP subfamily
487
Analysis of the Structure and Savings of the Potato Production Scale Using the Translog Cost Function (Ardabil County)
488
Analysis of the structure of dendrimers in solution by small-angle neutron scattering using contrast variation
489
Analysis of the structure of international scientific cooperation networks through bibliometric indicators
490
Analysis of the structure of polyaniline absorption spectra based on spectroelectrochemical data
491
Analysis of the Structure of Public Hospitals Administration in Iran: A Qualitative Study
492
Analysis of the structure of titanium tetrachloride derived precipitates
493
Analysis of the structure of titanium tetrachloride derived precipitates
494
Analysis of the structure of titanium tetrachloride derived precipitates
495
Analysis of the Structure, Substrate Specificity, and Mechanism of Squash Glycerol-3-Phosphate (1)-Acyltransferase
496
Analysis of the Subject-Verb Agreement Ability among Indonesian English Major Students as EFL Learners
497
Analysis of the Substrate Specificity of the Dim-5 Histone Lysine Methyltransferase Using Peptide Arrays
498
Analysis of the suction effect on the mass transfer when using the heat and mass transfer analogy Original Research Article
499
Analysis of the sudden onset and disappearance of disfluencies in the speech of a 2 1/2-year-old boy
500
Analysis of the sulphur mustard metabolites thiodiglycol and thiodiglycol sulphoxide in urine using isotope-dilution gas chromatography–ion trap tandem mass spectrometry
501
Analysis of the sunward continuum features of Comet 103P/Hartley 2 from ground-based images
502
Analysis of the superconvergent patch recovery technique and a posteriori error estimator in the finite element method (I) Original Research Article
503
Analysis of the superconvergent patch recovery technique and a posteriori error estimator in the finite element method (II) Original Research Article
504
Analysis of the Superkamiokande atmospheric neutrino data in the framework of four neutrino mixings
505
Analysis of the Superkamiokande atmospheric neutrino data in the framework of four neutrino mixings
506
Analysis of the supersaturation and precipitation process with supercritical CO2
507
Analysis of the Superstructure of a Designed Bus in Accordance with Regulations ECE R 66
508
Analysis of the supporting websites for the use of instructional games in K-12 settings
509
Analysis of the surface expression of c-kit and occurrence of the c-kit Asp816Val activating mutation in T cells, B cells, and myelomonocytic cells in patients with mastocytosis
510
ANALYSIS OF THE SURFACE MAGNETOPLASMON MODES IN THE SEMICONDUCTOR SLIT WAVEGUIDE AT TERAHERTZ FREQUENCIES
511
Analysis of the surface of lithium in organic electrolyte by atomic force microscopy, Fourier transform infrared spectroscopy and scanning auger electron microscopy
512
Analysis of the surface of tricalcium silicate during the induction period by X-ray photoelectron spectroscopy
513
Analysis of the surface plasmon resonance of a single core-shelled nanocomposite by surface integral equations
514
Analysis of the surface resistance of the superconducting accelerating cavities of the S-DALINAC
515
Analysis of the surface resistance of the superconducting accelerating cavities of the S-DALINAC
516
Analysis of the surface roughness of tangential turn-milling for machining with end milling cutter
517
Analysis of the surface state of epi-ready Ge wafers
518
Analysis of the surface technology of silicon detectors for imaging of low-energy beta tracers in biological material
519
Analysis of the surface technology of silicon detectors for imaging of low-energy beta tracers in biological material
520
Analysis Of The Surface Texture Modifications Of Some Catalyst Oxides By Foreign Salt Additives
521
ANALYSIS OF THE SURVEY RESULTS OF LAWYERS PROVIDING TRAINING FOR TRAINEE SOLICITORS TO CONTRIBUTE TO IZMIR BAKIRCAY UNIVERSITY LAW FACULTY EDUCATION
522
Analysis of the survival of patients receiving systemic treatment for melanoma of the skin: a retrospective population study with patients treated in Poland in 2011–2015
523
Analysis of the sustainability of agricultural farms through agri-environmental indicators at the level of biodiversity and landscape
524
Analysis of the sustainability of reusing industrial wastes as energy source in the industrial sector of Taiwan
525
Analysis of the sustainability of using wastes in the Brazilian power industry
526
Analysis of the sustainability within the composite swidden agroecosystem in northern Vietnam: 1. Partial nutrient balances and recovery times of upland fields
527
Analysis of the Suzaku/XRS background
528
Analysis of the Suzaku/XRS background
529
Analysis of the synthesis of 1,1-dibutoxyethane in a simulated moving-bed adsorptive reactor
530
Analysis of the Synthesis of Biodiesel Using the Homotopy Analysis Method
531
Analysis of the Syrian electric power system
532
Analysis of the Syrian long-term energy and electricity demand projection using the end-use methodology
533
Analysis of the system 3CaO•Al2O3–CaSO4•2H2O–CaCO3–H2O by FT-IR spectroscopy
534
Analysis of the Systematic Correlations Between the Influential Factors in Effective Teaching from the Perspective of the Faculty Members of Kermanshah University of Medical Sciences Based on the Graph Theory (2019)
535
Analysis of the Systematic Relationships among Social Determi-nants of Health (SDH) and Identification of Their Prioritization in Iran Using DEMATEL Technique
536
Analysis of the T cell receptor Vβ repertoire in human aortic aneurysms Original Research Article
537
ANALYSIS OF THE TAPERED SLOT ANTENNA BY THE METHOD OF LEAST SQUARES.
538
Analysis of the tastes of brown rice and milled rice with different milling yields using a taste sensing system
539
Analysis of the Tax Gap and Its Affecting Factors Using Game Theory Approach
540
Analysis of the temperature dependence of elastic constants of AgCl
541
Analysis of the temperature dependence of femtosecond excited state dynamics of bacteriorhodopsin by spin-boson model
542
Analysis of the temperature dependence of tensile elongation for a mechanically milled Al–1.1 at.%Mg–1.2 at.%Cu alloy by a dislocation dynamics approach
543
Analysis of the temperature dependence of tensile elongation for a mechanically milled Al–1.1 at.%Mg–1.2 at.%Cu alloy by a dislocation dynamics approach
544
Analysis of the temperature distribution in a guarded hot plate apparatus for measuring thermal conductivity
545
Analysis of the temperature effect on the components of plant digestibility in two populations of perennial ryegrass
546
Analysis of the Temperature Field from Multiple Jets in the Schwarz Melt Blowing Die Using Computational Fluid Dynamics
547
Analysis of the temperature field in compound samples heated in multizone resistance furnaces Original Research Article
548
Analysis of the temperature field near a corner composed of dissimilar metals subjected to a current flow
549
Analysis of the temperature history of amorphous silicon photovoltaic module outdoors
550
ANALYSIS OF THE TEMPERATURE INCREASE LINKED TO THE POWER INDUCED BY RF SOURCE
551
Analysis of the temperature influence on flexible pavement deflection
552
Analysis of the temperature stratification of a no-frost domestic refrigerator with bottom mount configuration
553
Analysis of the temporal and concentration-dependent effects of BMP-4, VEGF, and TPO on development of embryonic stem cell–derived mesoderm and blood progenitors in a defined, serum-free media
554
Analysis of the temporal and spatial disease progress of Bemisia tabaci-transmitted Cucurbit yellow stunting disorder virus and Cucumber vein yellowing virus in cucumber
555
Analysis of the temporal decomposition procedure for scheduling with release and due dates
556
Analysis of the Temporal Occurrence of Seismicity at Deception Island (Antarctica). A Nonlinear Approach
557
Analysis of the temporal performance of one versus on-line comprehensive two-dimensional liquid chromatography
558
Analysis of the temporal properties in car accident time series
559
Analysis of the temporal properties of price shock sequences in crude oil markets
560
Analysis of the tenderisation of jumbo squid (Dosidicus gigas) meat by ultrasonic treatment using response surface methodology
561
Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions
562
Analysis of the tensile behaviour of viscoelastically prestressed polymeric matrix composites
563
Analysis of the terminal effect on the resistance tape at its constant and variable local conductivity
564
Analysis of the terminal phase of penetration
565
Analysis of the Tests Developed by the Courts in Determining the Existence of an Employee or an Independent Contractor Relationship in the Imposition of Vicarious Liability in Malaysia
566
Analysis of the texture of superplastic carburized duplex stainless alloy
567
Analysis of The Theory of Embryo Formation from Male Sperm and Lack of Attention to Female Sperm in Quranic Verses
568
Analysis of the thermal behavior of AlGaN/GaN HEMTs
569
Analysis of the thermal behaviour of a low cost, single-family, more sustainable house in Porto Alegre, Brazil
570
Analysis of the Thermal Comfort and Impact Properties of the Neoprene-Spacer Fabric Structure for Preventing the Joint Damages
571
Analysis of the Thermal Comfort Properties and Heat Protection Performance of Cotton/Nylon-Kermel Fabrics
572
Analysis of the Thermal Comfort Properties and Heat Protection Performance of Cotton/Nylon-Kermel Fabrics
573
Analysis of the thermal cooling capacity of heat pipes under a low Reynolds number flow
574
Analysis of the thermal elastohydrodynamic lubrication of a finite line contact
575
Analysis of the Thermal Energy Requirements for the Extraction of Leaf Protein Concentrate from some Green Plants
576
Analysis of the thermal environment in a mushroom house using sensible heat balance and 3-D computational fluid dynamics
577
Analysis of the thermal fatigue process
578
Analysis of the thermal management system for a pump laser
579
Analysis of the thermal performance and comfort conditions produced by five different passive solar heating strategies in the United States midwest q
580
Analysis of the thermal performance and convection effects in an aluminum holding furnace using CFD
581
Analysis of the thermal performance of a building design located at 2465 m: Antalya-Saklikent National Observatory guesthouse
582
Analysis of the thermal performance of a church window steam condenser for different operational conditions using three models
583
Analysis of the thermal performance of a solar water heating system with flat plate collectors in a temperate climate
584
Analysis of the thermal properties of air-conditioning-type building materials
585
Analysis of the thermal stability of an embankment under different pavement types in high temperature permafrost regions
586
Analysis of the thermal stress and warpage induced by soldering in monocrystalline silicon cells
587
Analysis of the thermal stress behaviour of functionally graded hollow circular cylinders
588
Analysis of the thermodynamic feasibility of NOx decomposition catalysis to meet next generation vehicle NOx emissions standards
589
Analysis of the Thermodynamics of Binding of an SH3 Domain to Proline-rich Peptides using a Chimeric Fusion Protein
590
Analysis of the thermomechanical behavior of Ti–Ni shape memory alloy thin films by bulging and nanoindentation procedures
591
Analysis of the thermomechanical behavior of Ti–Ni shape memory alloy thin films by bulging and nanoindentation procedures
592
Analysis of the thickness of a fresh water lens and of the transition zone between this lens and upwelling saline water
593
Analysis of the third European survey on working conditions with composite indicators
594
Analysis of the Three Most Prevalent Injuries in Australian Football Demonstrates a Season to Season Association Between Groin/Hip/ Osteitis Pubis Injuries With ACL Knee Injuries
595
Analysis of the three-dimensional VENUS-2 MOX core benchmark using the Monte Carlo code TRIPOLI-4 and the ENDF/B-VI.4, ENDF/B-VII.0 and JEFF-3.1 nuclear data sets
596
Analysis of the thrust characteristics of jet nozzles designed by various methods
597
Analysis of the time variation of environmental gamma radiation due to the precipitation
598
Analysis of the Time-Dependent Chemical Evolution of Titan Haze Tholin
599
Analysis of the time-varying pricing of a bottleneck with elastic demand using optimal control theory
600
Analysis of the TMJ intraarticular space variation: a non-invasive insight during mastication
601
Analysis of the Tobacco-Specific Nitrosamine 4(Methylnitrosamino)-1-(3-pyridyl)-1-butanol in Urine by Extraction on a Molecularly Imprinted Polymer Column and Liquid Chromatography/Atmospheric Pressure Ionization Tandem Mass Spectrometry
602
Analysis of the tokamak volumetric neutron source (VNS) design and range of its parameters
603
Analysis of the topography of a Bragg grating in chalcogenide glass
604
Analysis of the topography of microchannels with different sizes
605
Analysis of the torsion angle distribution of poly(vinylidene fluoride) in the melt
606
Analysis of the torsional strength of hardened splined shafts
607
Analysis of the Touschek lifetime and its application to the Pohang Light Source
608
Analysis of the Touschek lifetime and its application to the Pohang Light Source
609
Analysis of the T-peel strength in a Cu/Cr/Polyimide system Original Research Article
610
Analysis of the T-point-Hopf bifurcation
611
Analysis of the trade-off between economic growth and the reduction of nitrogen and phosphorus emissions in the Poyang Lake Watershed, China
612
Analysis of the trade-off between economic growth and the reduction of nitrogen and phosphorus emissions in the Poyang Lake Watershed, China
613
Analysis of the transcriptomic profilings of Mandarin fish (Siniperca chuatsi) infected with Flavobacterium columnare with an emphasis on immune responses
614
Analysis of the transferability of a biogeochemical lake model to lakes of different trophic state
615
Analysis of the transferability of a biogeochemical lake model to lakes of different trophic state
616
Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method
617
Analysis of the transient response and durability characteristics of a proton exchange membrane fuel cell with different micro-porous layer penetration thicknesses
618
Analysis of the transient response of an automatic dynamic balancer for eccentric rotors
619
Analysis of the transient response of an automatic dynamic balancer for eccentric rotors
620
Analysis of the transient response of an automatic dynamic balancer for eccentric rotors
621
Analysis of the transient response of LED-illuminated diodes under heavy radiation damage
622
Analysis of the transient response of LED-illuminated diodes under heavy radiation damage
623
Analysis of the transition from laminar annular flow to intermittent flow of steam condensation in noncircular microchannels
624
Analysis of the transitional temperature for tensile residual stress in grinding
625
Analysis of the Translator’s Use of Plurality to Overcome Culture Industry in Translation of Poems: The Case of Elahi’s Translation of T. S. Eliot’s AshWednesday into Farsi
626
Analysis of the Translators’ Social and Psychological Trends from the Perspective of Intertextuality
627
Analysis of the transmission ratio and efficiency ranges of the four-, five-, and six-link planetary gear trains
628
Analysis of the transpiration cooling of a thin porous plate in a hot laminar convective flow
629
Analysis of the transport pathways and potential sources of PM10 in Shanghai based on three methods Original Research Article
630
Analysis of the transverse cracking in hybrid cross-ply composite laminates
631
Analysis of the transverse energy distribution of hopping electrons through a glass funnel
632
Analysis of the transverse heat transfer coefficients in a dual channel ITER-type cable-in-conduit conductor Original Research Article
633
Analysis of the transverse kick to beams in low-frequency photoinjectors due to wakefield effects
634
Analysis of the transverse kick to beams in low-frequency photoinjectors due to wakefield effects
635
Analysis of the Travelling Forklift in Material Transport Activities in a Manufacturing Plant
636
Analysis of the treatment effect on recurrent bleeding and death in patients with cirrhosis and esophageal varices : Multistage competing-risks model compared to conventional methods
637
Analysis of the Treatment Efficacy of Percutaneous Catheter Drainage Under CT Guidance for Severe Acute Necrotizing Pancreatitis
638
Analysis of the tribocorrosion mechanisms in a pin-on-plate combination on the example of AISI304 steel
639
Analysis of the tribological behaviour of polymer composite tool materials for sheet metal forming
640
Analysis of the tritium breeding ratio benchmark experiments using the Monte Carlo code TRIPOLI-4
641
Analysis of the trophic network of a macrotidal ecosystem: the Bay of Somme (Eastern Channel)
642
Analysis of the truncation errors in the fast multipole method for scattering problems
643
Analysis of the tube-sheet cracking in slurry oil steam generators
644
Analysis of the tumoral cytotoxicity of green tea-infusions enriched with broccoli
645
Analysis of the turbine standstill for a grid connected wind farm (case study)
646
Analysis of the turbulence observed in the outer cusp turbulent boundary layer Original Research Article
647
Analysis of the turbulence–radiation interactions for large eddy simulations of turbulent flows
648
Analysis of the turbulent burning velocity
649
Analysis of the Turbulent Flow and Heat Transfer of the Impingement Cooling in a Channel with Cross Flow
650
Analysis of the twisting department at Superior Cable Corporation: A case study
651
Analysis of the two-dimensional Datta–Das spin field effect transistor
652
Analysis of the UDP-glucuronosyltransferase gene in Portuguese patients with a clinical diagnosis of Gilbert and Crigler–Najjar syndromes
653
Analysis of the ultralow friction behavior of a mesogenic fluid in a reciprocating contact
654
Analysis of the unbound spectrum of 12Li
655
Analysis of the uncertainties in gas uptake measurements using the Sieverts method
656
Analysis of the uncertainty associated with the estimation of nitrogen losses from farming systems
657
Analysis of the unconventional behavior of oil relative permeability during depletion tests of gas-saturated heavy oils
658
Analysis of the Understanding of Muslim Will Writing in Melacca
659
Analysis of the Uniaxial Magnetic Properties of High-Spin d6 Ions at Trigonal Prism and Linear Two-Coordinate Sites: Uniaxial Magnetic Properties of Ca3Co2O6 and Fe[C(SiMe3)3]2
660
Analysis of the unrest of active volcanoes using variations of the base level noise seismic spectrum
661
Analysis of the unsaponifiable fraction of lipids belonging to various milk-types by using comprehensive two-dimensional gas chromatography with dual mass spectrometry/flame ionization detection and with the support of high resolution time-of-flight mass
662
Analysis of the unstable behaviour of a single-phase natural circulation loop with one-dimensional and computational fluid-dynamic models
663
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
664
Analysis of the unsteadiness of a plasma jet and the related turbulence
665
Analysis of the uranium L3-edge X-ray absorption spectra of some actinides
666
Analysis of the uranium L3-edge X-ray absorption spectra of some actinides
667
Analysis of the urban heat island effects on building energy consumption
668
Analysis of the Urban Water Requisition Demand for the Purpose of Reengineering and Water Network Optimization (Case Study: Tabriz Eram Urban Area)
669
Analysis of the urban/rural broadband divide in Canada: Using GIS in planning terrestrial wireless deployme nt
670
Analysis of the use of industrial control systems in simulators: State of the art and basic guidelines
671
Analysis of the use of specimen mammography in breast conservation therapy
672
Analysis of the Utility of Economic Sectors in Achieving Agricultural Development: Applying an Analytic Hierarchy Process
673
Analysis of the vaccine potential of a laboratory Escherichia coli strain in a Japanese flounder model
674
Analysis of the value for unit commitment of improved load forecasts
675
Analysis of the vaporization process for a nano-scale liquid thread by molecular dynamics simulation
676
Analysis of the vaporization process in TG apparatus and its incidence in pyrolysis
677
Analysis of the vaporization process in TG apparatus and its incidence in pyrolysis
678
Analysis of the variability of joint input–output estimation methods
679
Analysis of the variability of RSSI values for active RFID-based indoor applications
680
Analysis of the variability of temperature gradient in the ocean frontal zones based on satellite data Original Research Article
681
Analysis of the variability of the axial dipole moment of a numerical geodynamo model
682
ANALYSIS OF THE VARIABILITY OF TUNISIAN ISOLATES OF LETTUCE MOSAIC VIRUS USING BIOLOGICAL AND MOLECULAR PROPERTIES
683
Analysis of the variable effect of dietary vitamin E supplements on experimental atherosclerosis
684
Analysis of the variable length nonzero window method for exponentiation
685
Analysis of the variation in eccentricity of the orbit of Cosmos 185 rocket, 1967-104B
686
Analysis of the variation in nanohardness of pearlitic steel: Influence of the interplay between ferrite crystal orientation and cementite morphology
687
Analysis of the variation in the permeate flux and of the efficiency of the recovery of mercury by polyelectrolyte enhanced ultrafiltration (PE-UF) Original Research Article
688
Analysis of the variation mechanism in the main energetic parameters in a single-stage vapour compression plant
689
Analysis of the variation regularity of the parameters of the discharge circuit with the distance between workpiece and inductor for electromagnetic forming processes
690
Analysis of the variety of education and outreach interventions in biodiversity conservation projects in Spain
691
Analysis of the vehicle fleet in the Kathmandu Valley for estimation of environment and climate co-benefits of technology intrusions
692
Analysis of the vehicle mix in the passenger-car sector in Japan for CO2 emissions reduction by a MARKAL model
693
Analysis of the Vertebrate Insulator Protein CTCF-Binding Sites in the Human Genome
694
Analysis of the vertices image, image and DDV with light-cone QCD sum rules Original Research Article
695
Analysis of the vesicular structure of basalts
696
Analysis of the vibration characteristics of double-walled carbon nanotubes Original Research Article
697
Analysis of the Vibration Isolation Effect of the Railway Rigid Sandwich Wall
698
Analysis of the vibrational spectra of trans-N,N′-bis-R-salicylidene-1′,2′-cyclohexanediamine
699
Analysis of the vibrational spectra of trans-N,N0-bis-salicylidene-10,20-cyclohexanediamine tautomers
700
Analysis of the vibrational spectra, force fields, and molecular structures of pentacarbonyl(methyl)manganese(I) and pentacarbonyl(methyl)rhenium(I)
701
Analysis of the vibrational spectrum of dihydrazinium 5,5′-azotetrazolate dihydrate by electronic structure calculations
702
Analysis of the vibrational static and dynamic second hyperpolarizabilities of polyacetylene chains
703
Analysis Of The Views of Secondary School Maths Teachers on Model and Modeling
704
Analysis of the Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
705
Analysis of the viscous quantum hydrodynamic equations for semiconductors
706
Analysis of the volatile components emitted from cut tobacco processing by gas chromatography/mass spectrometry thermal desorption system
707
Analysis of the volatile components of Argyranthemum adauctum (Link.) Humphries by gas chromatography–mass spectrometry
708
Analysis of the volatile components of Lavandula canariensis (L.) Mill., a Canary Islands endemic species, growing in Australia
709
Analysis of the volatile fraction of “Pesto Genovese” by headspace sorptive extraction (HSSE)
710
Analysis of the volatile profile and identification of odour-active compounds in Bayonne ham
711
Analysis of the Volmer¯Krishtalic mechanism for the chlorine electrode reaction
712
Analysis of the voltage distribution in a motor stator winding subjected to steep-fronted surge voltages by means of a multiconductor lossy transmission line model
713
Analysis of the Voltage Distribution in a Motor Stator Winding Subjected to Steep-Fronted Surge Voltages by Means of a Multiconductor Lossy Transmission Line Model
714
Analysis of the Voltage Swing for Logic and Memory Applications in Si/SiGe Resonant Interband Tunnel Diodes Grown by Molecular Beam Epitaxy
715
Analysis of the volume transition in thermosensitive core-shell particles by synchrotron small-angle X-ray scattering
716
Analysis of the Vulnerability of Pilgrims in Imam Reza s Shrine during the Emergency Evacuation Due to the Crisis using Fuzzy Logic and Interpolation Method
717
Analysis of the WAIS-III Index score scatter using the significant deviation from the mean of the four Index scores
718
Analysis of the wake field effects in the PEP-II storage rings with extremely high currents
719
Analysis of the wake field effects in the PEP-II storage rings with extremely high currents
720
Analysis of the water and thermal management in proton exchange membrane fuel cell systems
721
Analysis of the water column oxic/anoxic interface in the Black and Baltic seas with a numerical model
722
Analysis of the Water Resources Status in Kuwait
723
Analysis of the water supply system of the city of Apamea, using Computational Fluid Dynamics. Hydraulic system in the north-eastern area of the city, in the Byzantine period
724
Analysis of the Water Vapour Sorption Isotherms of Oil palm trunk and Rubberwood
725
Analysis of the water, energy, environmental and socioeconomic reality in selected Mediterranean countries (Cyprus, Turkey, Egypt, Jordan and Morocco) Original Research Article
726
Analysis of the waterjet contact/impact on target material
727
Analysis of the wear characteristics of an EDM electrode made by selective laser sintering
728
Analysis of the Wheeler-DeWitt equation beyond planck scale and dimensional reduction
729
Analysis of the white emission from ion beam synthesised layers by in-depth resolved scanning photoluminescence microscopy
730
Analysis of the Wind Resources in Saharan Atlas of Algeria: Adrar Region as a Case Study
731
Analysis of the Work of Atatürk named “Viewpoints Regarding the Instruction and Education of the Military” in terms of Leadership and Education
732
Analysis of the work-hardening behavior of C–Mn steels deformed under hot-working conditions
733
Analysis of the XENON100 dark matter search data
734
Analysis of the Young equation and use of the Kelvin equation in calculating the Gibbs excess
735
Analysis of the α-synuclein G209A mutation in familial Parkinsonʹs disease
736
Analysis of the β-Glucocerebrosidase Gene in Czech and Slovak Gaucher Patients: Mutation Profile and Description of Six Novel Mutant Alleles
737
Analysis of the β-methylene carbon-13 NMR chemical shifts: from vinylidene chloride copolymers to a general analysis of polymers
738
Analysis of the γ–ɛ–α′ variant selection induced by 10% plastic deformation in 304 stainless steel at −60 °C
739
Analysis of the ν11 band of ethylene-13C2 by high-resolution Fourier transform infrared spectroscopy
740
Analysis of the π-π Stacking Interactions between the Aminoglycoside Antibiotic Kinase APH(3′)-IIIa and Its Nucleotide Ligands Original Research Article
741
Analysis of theaflavins in biological fluids using liquid chromatography–electrospray mass spectrometry
742
Analysis of thein VitroTranslation Product of a Novel-TypeDrosophila melanogasterAldolase mRNA in Which Two Carboxyl-Terminal Exons Remain Unspliced
743
Analysis of Theories of Educational Jurisprudence and International Law Regarding the Cloned Child
744
Analysis of therapeutic effect and safety of target-dose metoprolol in the treatment of patients with diabetes mellitus with chronic heart failure
745
Analysis of therapeutic peptides in human urine by combination of capillary zone electrophoresis–electrospray mass spectrometry with preparative capillary isotachophoresis sample pretreatment
746
Analysis of Thermal Adaptation in the HSL Enzyme Family
747
Analysis of thermal and athermal deformation mechanisms during creep of γ-TiAl alloys
748
Analysis of thermal and athermal deformation mechanisms during creep of γ-TiAl alloys
749
Analysis of thermal and electrical performance of a hybrid (PV/T) air based solar collector for Iraq
750
Analysis of Thermal and Flow Characteristics in a Combined Cross-Flow and Jet-Flow Configuration with Flow-Guiding Fins
751
Analysis of thermal and water management with temperature-dependent diffusion effects in membrane of proton exchange membrane fuel cells
752
Analysis of thermal balance in high-temperature proton exchange membrane fuel cells with short stacks via in situ monitoring with a flexible micro sensor
753
Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method
754
Analysis of Thermal Behavior for Beam Blank Continuous Casting Mold Original Research Article
755
Analysis of thermal behavior in multi-layer metal thin films based on hyperbolic two-step model
756
Analysis of thermal comfort and indoor air quality in a mechanically ventilated theatre
757
Analysis of thermal conductivity data in heavy fermion compounds
758
Analysis of thermal contact resistance between polymer and mold in injection molding
759
Analysis of thermal cycles and working fluids for power generation in space
760
Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs
761
Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs
762
Analysis of thermal cycling efficiency and optimal design of heating/cooling systems for rapid heat cycle injection molding process
763
Analysis of Thermal Decay and Prediction of Operational Lifetime for a Type I BoronGermanium Codoped Fiber Bragg Grating
764
Analysis of thermal decomposition behaviors with consecutive reactions by TG
765
Analysis of Thermal Decomposition Kinetics and Calculation of Activation Energy for Degradation of Polyaniline-Graphene Oxide Composites-Synergistic Reinforcement on Thermal Stability
766
Analysis of thermal decomposition products arising from polyvinyl chloride analogs by supersonic jet/multiphoton ionization/mass spectrometry
767
Analysis of thermal degradation kinetics and carbon structure changes of co-pyrolysis between macadamia nut shell and PET using thermogravimetric analysis and 13C solid state nuclear magnetic resonance
768
Analysis of thermal diffusivity by parameter estimation in converging thermal-wave technique
769
Analysis of thermal diffusivity in aluminum (particle)-filled PMMA compounds
770
Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow
771
Analysis of thermal distributions in veneered zirconia and metal restorations during firing
772
Analysis of thermal effects in a spherical adsorbent pellet
773
Analysis of thermal effects on the misaligned hydraulic servo cylinder
774
Analysis of thermal emission from the nightside of Venus at 1.51 and 1.55 μm
775
Analysis of Thermal Emission Spectrometer data using spectral EOF and tri-spectral methods
776
Analysis of thermal energy demand and saving in industrial buildings: A case study in Slovakia
777
Analysis of thermal fields in orthogonal machining with infrared imaging
778
Analysis of thermal hysteresis protein hydration using the random network model Original Research Article
779
Analysis of thermal performance and energy savings of membrane based heat recovery ventilator
780
Analysis of thermal performance and optimization of concentric circular fins under dehumidifying conditions
781
Analysis of thermal phenomena in LENS™ deposition
782
Analysis of thermal processes in solidifying casting using the combined variant of the BEM
783
Analysis of thermal properties by scanning thermal microscopy in nanocrystallized iron surface induced by ultrasonic shot peening
784
Analysis of thermal properties by scanning thermal microscopy in nanocrystallized iron surface induced by ultrasonic shot peening
785
Analysis of thermal radiation effects on temperatures in turbine engine thermal barrier coatings
786
Analysis of thermal radiation effects on temperatures in turbine engine thermal barrier coatings
787
Analysis of thermal relaxation process of aerosol particles in a quadrupole cell by photon correlation spectroscopy
788
Analysis of thermal residual stress in plastic injection molding
789
Analysis of thermal response of a food self-heating system
790
Analysis of thermal stratification in the upper plenum of the “Monju” reactor
791
Analysis of thermal stress evolution in the steam drum during start-up of a heat recovery steam generator
792
Analysis of thermal stress in magnetron sputtered TiN coating by finite element method
793
ANALYSIS OF THERMAL STRESSES AT DISSIMILAR METAL PIPE WELDS
794
ANALYSIS OF THERMAL STRESSES AT DISSIMILAR METAL PIPE WELDS
795
Analysis of thermal treatment effects upon optico-luminescent and scintillation characteristics of oxide and chalcogenide crystals
796
Analysis of thermal treatment effects upon optico-luminescent and scintillation characteristics of oxide and chalcogenide crystals
797
Analysis of Thermal-Bending Stresses in a Simply Supported Annular Sector Plate
798
Analysis of thermal–hydrologic–mechanical behavior near an emplacement drift at Yucca Mountain
799
Analysis of thermal-induced dentinal fluid flow and its implications in dental thermal pain
800
Analysis of thermally aged adhesion specimen between precured and uncured rubber sheets
801
Analysis of thermally developing flow in porous media under local thermal non-equilibrium conditions
802
Analysis of Thermally Driven Ventilation in Tunnel Greenhouses using Small Scale Models
803
Analysis of thermally induced cylindrical flexure of laminated plates with piezoelectric layers
804
Analysis of thermally induced multistable composites
805
Analysis of thermally stimulated current and effect of rubbery annealing around glass-rubber transition temperature in polyethylene terephthalate
806
Analysis of thermally treated silica gel using Fourier transform ion cyclotron resonance mass spectrometry
807
Analysis of thermal-probe measurements using an iterative method to give sample conductivity and diffusivity data
808
Analysis of thermionic emission from electrodeposited Ni–Si Schottky barriers
809
Analysis of thermodynamic identities for materials under extreme compression
810
Analysis of thermodynamic non-ideality in terms of protein solvation Original Research Article
811
Analysis of thermodynamic processes involving hydrogen
812
Analysis of thermoelastic behaviour of MgO at high temperatures and high pressures Original Research Article
813
Analysis of thermoelastic characteristics for vertical-cracked thermal barrier coatings through mathematical approaches
814
Analysis of thermoelastic constants of solids and minerals at high temperatures Original Research Article
815
Analysis of Thermoelastic Crack Problems Using Green-Lindsay Theory
816
Analysis of thermoelastic damping in microresonators by considering the stretching effect
817
Analysis of thermoelastic damping in microresonators by considering the stretching effect
818
Analysis of thermo-elastic plates based on Reissner’s mixed variational theorem
819
Analysis of Thermoelastic Waves in Functionally Graded Hollow Spheres Based on the Green-Lindsay Theory
820
Analysis of thermoelectric cooler performance for high power electronic packages
821
Analysis of thermoelectric energy conversion efficiency with linear and nonlinear temperature dependence in material properties
822
Analysis of thermograms for the estimation of dimensions of cracks in building envelope
823
Analysis of thermohydrologic behavior for above-boiling and below-boiling thermal-operating modes for a repository at Yucca Mountain
824
Analysis of thermo–hydro–mechanical process in the engineered barrier system of a high-level waste repository Original Research Article
825
Analysis of thermo-mechanical cracking in refractory coatings using variable pulse-duration laser pulse heating
826
Analysis of Thermomechanical Fatigue by using Finite Element Post-pro
827
Analysis of thermomechanical interactions and properties of ceramic breeder blankets
828
Analysis of thermo-mechanical process occurred in magnesium alloy AZ31 sheet during differential speed rolling
829
Analysis of thermoviscoelastic frictionless contact of layered bodies
830
Analysis of thermo-visco-plastic behaviour of six high strength steels
831
Analysis of thiabendazole and procymidone in fruits and vegetables by capillary electrophoresis–electrospray mass spectrometry
832
Analysis of thick functionally graded plates by using higher-order shear and normal deformable plate theory and MLPG method with radial basis functions
833
Analysis of thick isotropic and cross-ply laminated plates by radial basis functions and a Unified Formulation
834
Analysis of Thick Laminated Composite Plates on an Elastic Foundation with the Use of Various Plate Theories
835
Analysis of thick orthotropic laminated composite plates based on higher order shear deformation theory
836
Analysis of thick plates by the natural radial element method
837
Analysis of thick plates by the natural radial element method
838
Analysis of thick plates by using a higher-order shear and normal deformable plate theory and MLPG method with radial basis functions Original Research Article
839
Analysis of thick sandwich construction by a {3,2}-order theory
840
Analysis of thick walled composite pipes with metal liner subjected to simultaneous matrix cracking and plastic flow
841
Analysis of thickness dependence of the sensitivity in thin film resistive gas sensors
842
Analysis of thickness distribution of square-sectional hydroformed parts
843
Analysis of thickness locking in classical, refined and mixed multilayered plate theories
844
Analysis of thickness locking in classical, refined and mixed theories for layered shells
845
Analysis of thickness profiles of pulsed laser deposited metal films
846
Analysis of thickness profiles of pulsed laser deposited metal films
847
Analysis of thin beams, using the meshless local Petrov-Galerkin method, with generalized moving least squares interpolations
848
Analysis of thin coatings of nonlinear diffraction gratings
849
Analysis of thin film growth using finite element method
850
Analysis of thin film surface barrier solar cells with a microrelief interface
851
Analysis of thin film thickness determination in two-phase flow using a multifiber optical sensor
852
Analysis of Thin Isotropic Rectangular and Circular Plates with Multiquadrics
853
Analysis of thin piezoelectric solids by the boundary element method Original Research Article
854
Analysis of thin plates by a combination of isogeometric analysis and the Lagrange multiplier approach
855
Analysis of thin plates by the element-free Galerkin method
856
Analysis of thin plates by the local boundary integral equation (LBIE) method
857
Analysis of thin shells by the Element-Free Galerkin method
858
Analysis of thin shells using anisotropic polyconvex energy densities Original Research Article
859
ANALYSIS OF THIN WALLED TUBE AL 3003 H12 UNDER QUASI-STATIC AXIAL CRUSH MODE USING FINITE ELEMENT METHOD
860
Analysis of thin-film lithium batteries with cathodes of 50 nm to 4 μm thick LiCoO2
861
Analysis of thin-film silicon solar cells with plasma textured front surface and multi-layer porous silicon back reflector
862
Analysis of thinning at the transition corner in tube hydroforming
863
Analysis of thin-walled composite box beam under torsional load without external restraint
864
Analysis of thin-walled curved box beam under in-plane flexure
865
Analysis of thin-walled steel RHS columns filled with concrete under long-term sustained loads
866
Analysis of thin-walled structural elements via 3D standard BEM with generic substructuring
867
Analysis of thiocyanate in biological fluids by capillary zone electrophoresis
868
Analysis of thiols
869
Analysis of third-order intermodulation distortion in common-emitter BJT and HBT amplifiers
870
Analysis of third-party warehousing contracts with commitments
871
Analysis of threats to South American flora and its implications for conservation
872
Analysis of three- and four-way data using multivariate curve resolution-alternating least squares with global multi-way kinetic fitting
873
Analysis of three hundred fifteen ectopic pregnancies treated with single-dose methotrexate
874
Analysis of three hybrid systems in timed μCRL
875
Analysis of three level supply chain of inventory with deterioration for multi-items
876
Analysis of three LOCAs for the European HCPB test blanket system
877
Analysis of three nonlinear effects in a continuum approach to heat transport in nanosystems
878
Analysis of three years of boundary layer observations over the Gulf of Mexico and its shores
879
ANALYSIS OF THREE-DIMENSIONAL CONSOLIDATIONOF UNSATURATED SOILS
880
Analysis of three-dimensional crack initiation and propagation using the extended finite element method
881
Analysis of three-dimensional effects in oscillating cantilevers immersed in viscous fluids
882
Analysis of three-dimensional flow in a cylindrical sediment oxygen demand chamber
883
Analysis of three-dimensional fracture mechanics problems: A non-intrusive approach using a generalized finite element method
884
Analysis of three-dimensional heat and fluid flow induced by piezoelectric fan
885
Analysis of three-dimensional heat transfer in micro-channel heat sinks
886
Analysis of three-dimensional interface cracks using enriched finite elements
887
Analysis of three-dimensional microarchitecture and degree of mineralization in bone metastases from prostate cancer using synchrotron microcomputed tomography
888
Analysis of three-dimensional micro-mechanical strain formulations for granular materials: Evaluation of accuracy
889
Analysis of three-dimensional natural convection of nanofluids by BEM
890
ANALYSIS OF THREE-DIMENSIONAL TRANSIENT ACOUSTIC WAVE PROPAGATION USING THE BOUNDARY INTEGRAL EQUATION METHOD
891
Analysis of three-phase rectifiers with constant-voltage loads
892
Analysis of Three-Year Death Records of Hacettepe University Adult Hospital
893
Analysis of threshold-based batch-service queueing systems with batch arrivals and general service times
894
Analysis of thrust force in a work roll shifting mill
895
Analysis of thrust force in a work roll shifting mill
896
Analysis of thrust shear zones in curve-shaped belts: Deformation mode and timing of the Olevano-Antrodoco-Sibillini thrust (Central/Northern Apennines of Italy)
897
Analysis of thunderstorm and lightning activity associated with sprites observed during the EuroSprite campaigns: Two case studies
898
Analysis of thunderstorms in Bangladesh using ARIMA model
899
Analysis of thyreostatic drugs in thyroid samples by liquid chromatography tandem mass spectrometry: Comparison of two sample treatment strategies
900
Analysis of thyreostatic drugs in thyroid samples by Ultra-Performance Liquid Chromatography tandem mass spectrometry detection Original Research Article
901
Analysis of thyreostats: A history of 35 years Review Article
902
Analysis of thyroid hormones in raw and treated waste water
903
Analysis of tidal signals in surface displacement measured by a dense continuous GPS array
904
Analysis of timber-framed wall elements with openings
905
Analysis of time delay model for drug therapy on HIV dynamics
906
Analysis of time harmonic wave propagation in an elastic layer under heavy fluid loading
907
Analysis of time reduction methods for magnetic resonance elastography of the brain
908
Analysis of time resolution in a dual head PET system using low pass filter interpolation and digital constant fraction discriminator techniques
909
Analysis of time resolution in a dual head PET system using low pass filter interpolation and digital constant fraction discriminator techniques
910
Analysis of time series data on agroecosystem vegetation using predictive clustering trees
911
Analysis of time series data on agroecosystem vegetation using predictive clustering trees
912
Analysis of time series for non-invasive characterization of blood components and circulation patterns
913
Analysis of time-course gene expression profiles of a periodontal ligament tissue model under compression
914
Analysis of time-dependent conjugation of gold nanoparticles with an antiparkinsonian molecule by using curve resolution methods Original Research Article
915
Analysis of time-resolved interaction force mode AFM imaging using active and passive probes
916
Analysis of time-resolved interaction force mode AFM imaging using active and passive probes
917
Analysis of time-scaling properties in forest-fire sequence observed in Italy
918
Analysis of time-scaling properties in forest-fire sequence observed in Italy
919
Analysis of time-series MODIS 250 m vegetation index data for crop classification in the U.S. Central Great Plains
920
Analysis of Time–Varying Mesh Stiffness for the Planetary Gear System with Analytical and Finite Element Methods
921
Analysis of time-varying rolling element bearing characteristics
922
Analysis of time-varying wind-induced currents in the North Channel of the Irish Sea, using empirical orthogonal functions and harmonic decomposition
923
Analysis of timing performance for an APD-LSO scintillation detector
924
Analysis of timing performance for an APD-LSO scintillation detector
925
Analysis of tin behaviour on surface of rapidly solidified aluminium alloy powder particles during heating
926
Analysis of tin in lead oxide by Mössbauer spectrometry and transmission electron microscopy
927
Analysis of tin whisker growth on lead-free alloys with Ni presence under thermal shock stress
928
Analysis of Ti–Ni–Hf shape memory alloys by combinatorial nanocalorimetry Original Research Article
929
Analysis of TiO2 photocatalysis in a pulsed discharge system for phenol degradation
930
Analysis of tissue invasiveness of adherent strains of Listeria monocytogenes by in vivo mouse assay
931
Analysis of Titan CH4 3.3 μm upper atmospheric emission as measured by Cassini/VIMS
932
Analysis of Titan tholin pyrolysis products by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry
933
Analysis of Titanʹs neutral upper atmosphere from Cassini Ion Neutral Mass Spectrometer measurements
934
Analysis of TLD-100 Calibration and Correction Factor in Different Field Sizes Under Low Dose Conditions Irradiated with Two Systems: Gamma Knife 4C and Theratron 780-C
935
Analysis of Tlr4-Mediated LPS Signal Transduction in Macrophages by Mutational Modification of the Receptor
936
Analysis of Tlr4-Mediated LPS Signal Transduction in Macrophages by Mutational Modification of the Receptor: Volume 25, Number 6 (1999), pages 328–338 (doi:10.1006/bcmd.1999.0262)
937
Analysis of TLR7, SOCS1 and ISG15 immune genes expression in the peripheral blood of responder and non-responder patients with chronic Hepatitis C
938
Analysis of TNF alpha and Interlukin-1β genes in Oreochromis niloticus: inflammatory responses induced by Myxobolus spp. and Trichodina spp.
939
Analysis of Tobacco-Specific Nitrosamines in the Common Smokeless Tobacco Afzal in Oman
940
Analysis of tobacco-specific N-nitrosamines in snuff by ethyl acetate extraction and liquid chromatography–tandem mass spectrometry
941
Analysis of TOF-SIMS spectra from fullerene compounds
942
Analysis of Tolerance Indices in Some Rice (Oryza sativa L.) Genotypes at Salt Stress Condition
943
Analysis of Toll-like receptor 2 of antarctic teleosts
944
Analysis of Toluene: Removal of toluene from the air s tream using a bed made of metal-organic frameworks adsorbent
945
Analysis of tomato taste using two types of electronic tongues
946
Analysis of tomographic mineralogical data using YaDiV—Overview and practical case study
947
Analysis of tongue and groove joints for thick laminates
948
Analysis of Tool and Workpiece Interaction in Diamond Turning Using Graphical Analysis of Acoustic Emission
949
Analysis of tool sharing in an FMS: A simulation study
950
Analysis of tool wear patterns in finishing turning of Inconel 718
951
Analysis of topographic and climatic control on rainfall-triggered shallow landsliding using a quasi-dynamic wetness index
952
ANALYSIS OF TOPOLOGICAL DERIVATIVE FUNCTION FOR A FAST ELECTROMAGNETIC IMAGING OF PERFECTLY CONDUCING CRACKS
953
Analysis of topological properties in a seismic network
954
Analysis of torque developed in axial flux, single-phase brushless DC motor with salient-pole stator
955
Analysis of torsional deformation by rigid-plastic finite element method using recurrent boundary conditions
956
Analysis of torsion-rotational transitions in the first three torsional states of CH3OD Original Research Article
957
Analysis of total aerobic viable counts in samples of raw meat using fluorescence-based probe and oxygen consumption assay
958
Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry
959
Analysis of total and organic carbon and total nitrogen in settling oceanic particles and a marine sediment: an interlaboratory comparison
960
Analysis of total dissolved mercury in waters after on-line preconcentration on an active gold column
961
Analysis of total energy system based on solid oxide fuel cell for combined cooling and power applications
962
Analysis of total factor productivity growth of sugar beet in Iran using Malmquist approach
963
Analysis of total inositol phosphates in municipal solid waste compost-treated soils by two extraction methods
964
Analysis of total phenol, flavonoid, and chlorogenic acid content of robusta coffee leaves extract using nades (natural deep eutectic solvent)
965
Analysis of total phenolic, flavonoids, anthocyanins and tannins content in Romanian red wines: Prediction of antioxidant activities and classification of wines using artificial neural networks
966
Analysis of total polyphenols in wines by FIA with highly stable amperometric detection using carbon nanotube-modified electrodes
967
Analysis of total propionic acid in feed using headspace solid-phase microextraction and gas chromatography
968
Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001 Original Research Article
969
Analysis of tour values to develop enablers using an interpretive hierarchy-based model in Taiwan
970
Analysis of Tourism Effects on Economic, Socio-Cultural and Environmental Development of Astara City Using Chi-square Model
971
Analysis of tourism trends in Spain
972
Analysis of tourist behaviour based on the tracking data collected using a mobile communication instrument
973
Analysis of Tourist Cluster in Mazandaran Using SWOT Approach
974
Analysis of tow deformations in textile preforms subjected to forming forces
975
Analysis of toxicity tests on Daphnia survival and reproduction
976
Analysis of toxicity tests on fish growth
977
Analysis of toxicological risks from local contamination by PCDDs and PCDFs: Importance of isomer distributions and toxic equivalents
978
Analysis of TP53 codon 72 polymorphism in HPV-positive and HPV-negative penile carcinoma
979
Analysis of TP53 Codon 72 Polymorphism in Mucinous and Non-Mucinous Colorectal Adenocarcinoma in Isfahan, Iran
980
Analysis of TP53 gene mutations in human lung cancer: Comparison of capillary electrophoresis single strand conformation polymorphism assay with denaturing gradient gel electrophoresis and direct sequencing
981
Analysis of Tproduction in K +- Xe collisions
982
Analysis of TQM Implementations in the Floor Tiles Industry
983
Analysis of trabecular microarchitecture of human iliac bone using microcomputed tomography in patients with hip arthrosis with or without vertebral fracture
984
Analysis of trace amino acid neurotransmitters in hypothalamus of rats after exhausting exercise using microdialysis
985
Analysis of trace amounts of alkenones in complex environmental samples by way of NaBH4/NaBD4 reduction and silylation
986
Analysis of trace amounts of carbon dioxide, oxygen and carbon monoxide in nitrogen using dual capillary columns and a pulsed discharge helium ionisation detector
987
Analysis of trace components in synthesis gas generated by black liquor gasification
988
Analysis of trace contaminants in hot gas streams using time-weighted average solid-phase microextraction: Proof of concept
989
Analysis of trace contamination of phthalate esters in ultrapure water using a modified solid-phase extraction procedure and automated thermal desorption–gas chromatography/mass spectrometry
990
Analysis of trace elements in human hair through X-ray fluorescence spectroscopy for screening of prostate cancer
991
Analysis of trace elements in multifloral Argentine honeys and their classification according to provenance
992
Analysis of trace elements in scalp hair of healthy people, hyperplasia and breast cancer patients with XRF method
993
Analysis of trace elements in scalp hair of healthy people, hyperplasia and breast cancer patients with XRF method
994
Analysis of Trace Elements in Teeth by ICP-MS: Implications for Caries
995
Analysis of trace elements responsible for antioxidant protection by SRXFA method
996
Analysis of trace elements responsible for antioxidant protection by SRXFA method
997
Analysis of trace impurities in hydrogen: Enrichment of impurities using a H2 selective permeation membrane
998
Analysis of trace level peptides using capillary electrophoresis with UV laser-induced fluorescence
999
Analysis of trace levels of domoic acid in seawater and plankton by liquid chromatography without derivatization, using UV or mass spectrometry detection
1000
Analysis of trace levels of sulfonamides in surface water and soil samples by liquid chromatography-fluorescence
