ليست عنوان مقالات لاتين Influence of surface chemical heterogeneity on attachment and detachment of microparticles Influence of the crystal orientation on the electrical properties of AlN thin films on LTCC substrates

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of surface chemical heterogeneity on attachment and detachment of microparticles

2

Influence of surface chemistry on the electronic properties of graphene nanoflakes

3

Influence of surface cleaning effects on properties of Schottky diodes on 4H–SiC

4

Influence of surface coating on ballistic performance of aluminum plates subjected to high velocity impact loads

5

Influence of surface condition on deuterium release from Li2TiO3 pebble

6

Influence of surface condition on the fatigue behaviour of specimens made of a SAE 5115 case-hardened steel

7

Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramic

8

Influence of surface conditioning on bonding to polyetheretherketon (PEEK)

9

Influence of surface coverage with poly(ethylene oxide) on attachment of sterically stabilized microspheres to rat Kupffer cells in vitro

10

Influence of Surface Curvature on Coanda Effect for Vertical Jet Impacting Horizontal Cylinder

11

Influence of surface defects and corrosive medium on the fatigue resistance of ST17G1S steel

12

Influence of surface defects on the biaxial strength of a silicon nitride ceramic – Increase of strength by crack healing

13

INFLUENCE OF SURFACE DEFORMATION AND ELECTROCHEMICAL VARIABLES ON CORROSION AND CORROSION FATIGUE CRACK DEVELOPMENT

14

Influence of surface deformation upon the properties of Cu-contacts on CdTe single crystals

15

Influence of surface degrees of freedom on the adsorption of Ge ad-atoms on Si(1 0 0)

16

Influence of surface diffusion on catalytic reactivity of spatially inhomogeneous surfaces – mean-field modeling

17

Influence of surface displacement on solid state flow induced by horizontally heterogeneous Joule heating in the inner core of the Earth

18

Influence of surface effects on the performance of lead–niobium–germanate optical waveguides

19

Influence of surface electronic structure on the Casimir force

20

Influence of surface energy and relative humidity on AFM nanomechanical contact stiffness

21

Influence of surface energy distribution on neuritogenesis

22

Influence of surface energy of modified surfaces on bacterial adhesion Original Research Article

23

Influence of surface esterification with alkenyl succinic anhydrides on mechanical properties of corn starch films

24

Influence of surface evaporation on stratification in liquid hydrogen tanks of different aspect ratios

25

Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres

26

Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia

27

Influence of surface finishing on residual stress depth profiles of a coarse-grained nickel-base superalloy

28

Influence of surface finishing on residual stress depth profiles of a coarse-grained nickel-base superalloy

29

Influence of surface forcing on near-surface and mixing layer turbulence in the tropical Indian Ocean

30

Influence of surface free energy on the adhesion of marine benthic diatom Nitzschia closterium MMDL533

31

Influence of surface functionalities on ethanol adsorption characteristics in activated carbons for adsorption heat pumps

32

Influence of surface functionalization on the thermal and electrical properties of nanotube–PVA composites

33

Influence of surface groups of proteins on water studied by freezing/thawing hysteresis and infrared spectroscopy Original Research Article

34

Influence of Surface Heterogeneities on Complexation of Ethylene with Active Sites of NiMCM-41 Nanocatalyst: A Density Functional Theory Study

35

Influence of surface heterogeneities on the formation of diffusion-limited aggregates

36

Influence of surface heterogeneity in electroosmotic flows—Implications in chromatography, fluid mixing, and chemical reactions in microdevices

37

Influence of surface heterogeneity on hydrogen adsorption on activated carbons

38

Influence of surface hydrophilicity on polytetrafluoroethylene flat sheet membrane fouling in a submerged membrane bioreactor using two activated sludges with different characteristics

39

Influence of surface hydroxyls on the formation of Zr-based conversion coatings on AA6014 aluminum alloy

40

Influence of surface ionization on the adsorption of aqueous mercury chlorocomplexes by activated carbons Original Research Article

41

Influence of surface ionization on the adsorption of aqueous zinc species by activated carbons Original Research Article

42

Influence of surface layer removal of shade guide tabs on the measured color by spectrophotometer and spectroradiometer

43

Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers

44

Influence of surface microstructure on the sliding friction of plantar skin against hard substrates

45

Influence of surface modification adopting thermal treatments on dispersion of detonation nanodiamond

46

Influence of surface modification of alumina on bond strength in Al2O3/Al/Al2O3 joints

47

Influence of surface modification on protein retention in ion-exchange chromatography: Evaluation using different retention models

48

Influence of surface modification on structure and electrochemical performance of LiNi0.5Co0.5VO4

49

Influence of surface modification on the apatite formation and corrosion behavior of Ti and Ti-15Mo alloy for biomedical applications

50

Influence of surface modification with Sn6O4(OH)4 on electrochemical performance of ZnO in Zn/Ni secondary cells

51

Influence of surface modifications to titanium on antibacterial activity in vitro

52

Influence of surface modified multiwalled carbon nanotubes on the mechanical and electroactive shape memory properties of polyurethane (PU)/poly(vinylidene diflouride) (PVDF) composites

53

Influence of surface modified TiO2 nanoparticles by gallates on the properties of PMMA/TiO2 nanocomposites

54

Influence of Surface Modifying Macromolecules (SMMs) on Polyethersulfone Hollow Fiber Membranes for Water Separations

55

Influence of surface modifying macromolecules on the surface properties of poly(ether sulfone) ultra-filtration membranes

56

Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels

57

Influence of surface morphology and surface area on release behavior of hydrogen isotopes in LiNbO3

58

Influence of surface morphology of cpTi on the adsorption and attachment of collagen/chitosan

59

Influence of surface morphology on corrosion and electronic behavior

60

Influence of surface morphology on corrosion and electronic behavior Original Research Article

61

Influence of surface morphology on the field emission properties of planar SiC/Si heterostructures formed by ion beam synthesis

62

Influence of Surface Nano!Ultrafine Structure Achieved by Deep Rolling Process on Plasma Nitriding an‎d Tribological Properties of the AISI 316L Stainless Steel

63

Influence of surface nano/ultrafine structure formed via pre-deep rolling process on the plasma nitriding characteristics of the AISI 316L stainless steel

64

Influence of surface nitriding treatment on rolling contact behavior of Fe-based plasma sprayed coating

65

Influence of surface on chemical kinetic of pyrocarbon deposition obtained by propane pyrolysis

66

Influence of surface orientation on the formation of sputtering-induced ripple topography in silicon

67

Influence of surface oxidation of titanium on adhesion

68

Influence of surface oxidation on electric potential measurements in MHD liquid metal flows

69

Influence of surface oxidation on the morphological and crystallographic structure of multi-walled carbon nanotubes via different oxidants

70

Influence of surface oxidation on the photoelectron diffraction intensities from InP single crystals

71

Influence of surface oxidation on transmission electron microscopy characterization of Fe–Ga alloys

72

Influence of surface oxides on the adhesion of a wild strain of Pseudomonas sp. to aluminium brass

73

Influence of surface oxides on the impedance behavior of carbon-based electrochemical capacitors

74

Influence of surface penetration on measured fluid force on a hand model

75

Influence of surface phenomena on free-molecule gas flow in fine channels

76

Influence of surface preparation and ion flux on the nitriding efficiency of austenitic stainless steel

77

Influence of surface preparation on CdZnTe nuclear radiation detectors

78

Influence of surface preparation on roughness parameters, friction and wear

79

Influence of surface pretreatment and charge–discharge mode on cycle performance of metal hydride electrodes

80

Influence of surface pretreatment of fiber posts on cement delamination

81

Influence of surface pretreatment of titanium- and cobalt-based biomaterials on covalent immobilization of fibrillar collagen

82

Influence of surface pretreatment on case formation during gaseous nitriding

83

Influence of surface pretreatment on the anodizing film of Mg alloy and the mechanism of the ultrasound during the pretreatment

84

Influence of surface pretreatment on the chromium-free conversion coating of magnesium alloy

85

Influence of surface pre-treatments on disturbed rolled-in subsurface layers of aluminium alloys

86

Influence of surface processes on the dilational visco-elasticity of surfactant solutions

87

Influence of surface properties and bulk viscosity on bubble size prediction during foaming operation

88

Influence of surface properties and iron addition on the SO2 adsorption capacity of activated carbons Original Research Article

89

Influence of surface properties of carbon fibres on the adsorption of catalase Original Research Article

90

Influence of surface properties of ceramic particles on their incorporation into cobalt electroless deposits

91

Influence of surface properties of polymeric nanoparticles on their membrane affinity

92

Influence of surface properties of zinc oxide nanoparticles on their cytotoxicity

93

Influence of surface properties on bioactivity and pull-out torque in cold thread rolled Ti rod—Development of bioactive metal-forming technology

94

Influence of surface quality and porosity on fatigue behaviour of Ti–6Al–4V components processed by MIM

95

Influence of surface quenching on luminescence dynamics of ion centers in nanocrystals

96

Influence of surface reconstruction on MBE growth of layered GaSe on Si(111) substrates

97

Influence of surface reconstruction on Pbsingle bondZnSe interface formation

98

Influence of surface roughness and coating type on the galling properties of coated forming tool steel

99

Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins

100

Influence of surface roughness and running-in on the lubrication of steel surfaces with oil containing MoS2 nanotubes in all lubrication regimes

101

Influence of surface roughness effects on the performance of non-recessed hybrid journal bearings

102

Influence of surface roughness in hydrological response of semiarid catchments

103

Influence of Surface Roughness of Galvanized Steel Sheet on Self-lubricated Coating Original Research Article

104

Influence of surface roughness of PVD coatings on tribological performance in sliding contacts

105

Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance

106

Influence of surface roughness on consecutively hydrogen absorption cycles in Ti–6Al–4V alloy

107

Influence of surface roughness on friction during metal forming processes

108

Influence of surface roughness on gecko adhesion

109

Influence of surface roughness on mechanical strength of resin composite versus glass ceramic materials

110

Influence of surface roughness on pressure distribution and film thickness in EHL-contacts

111

Influence of surface roughness on space charge limited emission

112

Influence of surface roughness on streptococcal adhesion forces to composite resins

113

Influence of surface roughness on the bond of FRP laminates to concrete

114

Influence of surface roughness on the corrosion behaviour of magnesium alloy

115

Influence of surface roughness on the electrical conductivity of semiconducting thin films

116

Influence of surface roughness on the supercooling degree: Case of selected water/ethanol solutions frozen on aluminium surfaces

117

Influence of surface roughness on the tribological properties of HF-CVD diamond coated heat-treatable steel

118

Influence of surface roughness on water- and oil-repellent surfaces coated with nanoparticles

119

Influence of surface segregation on the elastic property of Pt–Ni alloy nanowires

120

Influence of surface state on the optical absorption of isolated nanoscale silver particles

121

Influence of surface stress in the missing row reconstruction of fcc transition metals

122

Influence of surface stress on elastic constants of nanohoneycombs

123

Influence of surface structure modifications on the growth of carbon-nanotubes on the SiC) surfaces

124

Influence of surface structure of SiC nano-sized powder analyzed by X-ray photoelectron spectroscopy on basic powder characteristics

125

Influence of surface structure on surface segregation and alloy properties in (100)- and (311)-oriented InGaAsGaAs heterostructures

126

Influence of surface structure on surface segregation and alloy properties in (100)- and (311)-oriented InGaAsGaAs heterostructures

127

Influence of surface structure on thermoprotection properties of intumescent systems

128

Influence of surface structures, subsurface carbon and hydrogen, and surface alloying on the activity and selectivity of acetylene hydrogenation on Pd surfaces: A density functional theory study

129

Influence of surface temperature and surface modifications on the initial layer growth of para-hexaphenyl on mica (0 0 1)

130

Influence of surface tension implementation in Volume of Fluid and coupled Volume of Fluid with Level Set methods for bubble growth and detachment

131

Influence of surface tension models on the hydrodynamics of wavy laminar falling films in Volume of Fluid-simulations

132

Influence of surface tension on mode-I crack tip field

133

Influence of surface tension, osmotic pressure and pores morphology on the densification of ice-templated ceramics

134

Influence of surface tensions of solvent/nonsolvent mixtures in membrane casting solutions on the performance of poly(2,6-dimethyl-1,4-phenylene) oxide membranes for gas separation applications

135

Influence of surface texture and microhabitat heterogeneity in structuring nodule faunal communities

136

Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate

137

Influence of surface texture on boundary lubricated sliding contacts

138

Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls

139

Influence of surface topography and pore architecture of alkali-treated titanium on in vitro apatite deposition

140

Influence of surface topography in the boiling mechanisms

141

Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions

142

Influence of surface topography of HF-CVD diamond films on self-mated planar sliding contacts in dry environments

143

Influence of surface topography on frictional properties of Cu surfaces under different lubrication conditions: Comparison of dry, base oil, and ZnS nanowire-based lubrication system

144

Influence of surface topography on osteoblast response to fibronectin coated calcium phosphate thin films

145

Influence of Surface Topography on the Effectiveness of Pulsed Light Treatment for the Inactivation of Listeria innocua on Stainless-steel Surfaces

146

Influence of surface treated fly ash with coupling agent on asphalt mixture moisture damage

147

Influence of surface treatment of elastomers on their frictional behaviour in sliding contact

148

Influence of surface treatment on defiltration of confined liquid in MCM-41

149

Influence of surface treatment on hybrid wollastonite-polyethylene composite resins for rotational moulding

150

Influence of surface treatment on interfacial microstructure and bond strength of diffusion-bonded tin

151

Influence of surface treatment on preparing nanosized TiO2 supported on carbon nanotubes

152

Influence of surface treatment on the electroless nickel plating of textile fabric

153

Influence of surface treatment on the Li doping/undoping reaction at a mesophase low temperature carbon fiber

154

Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic

155

Influence of surface treatments on crystalline germanium heterojunction solar cell characteristics

156

Influence of surface treatments on fatigue life of Al 7010 alloy

157

Influence of surface treatments on microstructure and electrochemical properties of La0.7Mg0.3Ni2.4Co0.6 hydrogen-storage alloy

158

Influence of surface treatments on surface layer properties, fatigue and corrosion fatigue performance of AA7075 T73

159

Influence of surface treatments on the bond strength of repaired resin composite restorative materials

160

Influence of surface treatments on the shear bond strength of orthodontic brackets to porcelain

161

Influence of surface velocity directions on lubricant film formation in EHL point contacts

162

Influence of Surface Viscosity on Two-Dimensional Faraday Waves

163

Influence of surface water activity on freezing/thawing times and weight loss prediction Original Research Article

164

Influence of surface wettability on the accuracy of measurement of fluid shear modulus

165

Influence of surface wettability on the tribological properties of laser textured Co–Cr–Mo alloy in aqueous bovine serum albumin solution

166

Influence of surface wettability on transition of two-phase flow pattern in round mini-channels

167

Influence of surface-active agents on pore characteristics of the generated spherical resorcinol–formaldehyde based carbon aerogels Original Research Article

168

Influence of surface-adhered nanoparticles and nanoporous structure on bulk flowability of silica

169

Influence of surface-adhered nanoparticles and nanoporous structure on particle–particle interaction of silica

170

Influence of surface-capping molecule exchange on the hyper-Rayleigh scattering of CdS nanoparticles

171

Influence of surface-coatings on titanium-alloy resistance to fretting fatigue in cryogenic environment

172

Influence of surface-roughness on indentation size effect Original Research Article

173

Influence of surfactant addition sequence on the suspension properties and electrophoretic deposition behaviour of alumina and zirconia

174

Influence of surfactant and lipid chain length on the solubilisation of phosphatidylcholine vesicles by micelles comprised of polyoxyethylene sorbitan monoesters

175

Influence of surfactant and salts on chemical mechanical planarisation of copper

176

Influence of surfactant composition on physical and oxidative stability of Quillaja saponin-stabilized lipid particles with encapsulated ω-3 fish oil

177

Influence of surfactant distribution on the stability of oil/water emulsions towards flocculation and coalescence

178

Influence of surfactant hydrophobic segment length on the thermodynamic parameters of binary mixed micelles of homologues polysorbates and Triton X-100

179

Influence of surfactant hydrophobicity on the detachment of Escherichia coli O157:H7 from lettuce

180

Influence of surfactant on rheological behaviors of injection–molded alumina suspensions

181

Influence of surfactant on rheological behaviors of injection–molded alumina suspensions

182

Influence of surfactant on the capacitive performance of manganese dioxide prepared at different temperatures

183

Influence of surfactant removal by chemical or thermal methods on structure and electroactivity of Pt/C catalysts prepared by water-in-oil microemulsion

184

Influence of surfactant sorption on the removal of phenanthrene from contaminated soils

185

Influence of surfactant structure on the double inversion of emulsions in the presence of nanoparticles

186

Influence of surfactant structures in luminescence enhancement dynamics during nucleation and growth of aqueous ZnS nanoparticles and their photoactivation due to illumination with UV/visible light

187

Influence of surfactant surface coverage and aging time on physical properties of silica nanoparticles

188

Influence of Surfactant Type, Surfactant Concentration, and Salinity on Interfacial Tension of a Brine/Live Oil/Surfactant Fluid System: A Case Study of Iranian Asmari Oil Reservoir

189

Influence of surfactant upon adsolubilization of hydrophobic organic compounds in fog droplets

190

Influence of surfactant-facilitated interfacial tension reduction on chlorinated solvent migration in porous media: observations and numerical simulation

191

Influence of surfactants on absorption of CO2 in a stirred tank with and without bubbling

192

Influence of surfactants on atomic diffusion

193

Influence of surfactants on electrochemical behavior of zinc electrodes in alkaline solution

194

Influence of surfactants on Fe2O3 nanostructure photoanode

195

Influence of surfactants on porous properties of carbon cryogels prepared by sol–gel polycondensation of resorcinol and formaldehyde Original Research Article

196

Influence of surfactants on solubilization and fungal degradation of fluorene

197

Influence of surfactants on the corrosion inhibition behaviour of 2-aminophenyl-5-mercapto-1-oxa-3,4-diazole (AMOD) on mild steel

198

Influence of surfactants on the morphologies of CaCO3 by carbonation route with compressed CO2

199

Influence of surfactants on the morphology of SnO2 nanocrystals prepared via a hydrothermal method

200

Influence of surfactants on the photophysics of 4,4-diaminodiphenyl sulfone encapsulated in self-assembled nanocage of diblock copolymer

201

Influence of Surfactants on the Removal of AOX Using MicellarEnhanced Ultrafiltration

202

Influence of surfactants on the structure of the adsorption layer in the system: Carboxymethylcellulose/alumina

203

Influence of surgeonʹs experience on speech outcome in cleft lip and palate Original Research Article

204

Influence of surgery on aortic valve prolapse and aortic regurgitation in doubly committed subarterial ventricular septal defect

205

Influence of surgical approach on cancer control following radical prostatectomy

206

Influence of surgical stress and parenteral nutrition on serum leptin concentration

207

Influence of Surgical Therapy on Serum Values of Alpha 1-Antitrypsin in Patients with Head and Neck Tumors

208

Influence of surgical treatment for disc degeneration disease at C5–C6 on changes in some biomechanical parameters of the cervical spine

209

Influence of Surgicel gauze on the incidence of dry socket after wisdom tooth extraction

210

Influence of survey strategy and interpolation model on DEM quality

211

Influence of suspended particle concentration, composition and size on the variability of inherent optical properties of the Southern North Sea

212

Influence of suspended particles on indoor semi-volatile organic compounds emission

213

Influence of suspended particulate matter on salinity measurements

214

Influence of suspended solids and back diffusion on organic contaminant uptake by semi-permeable membranes (SPMDs)

215

Influence of suspension characteristics on coatings microstructure obtained by suspension plasma spraying

216

Influence of suspension concentration on cast formation time in pressure filtration

217

Influence of suspension damper asymmetry on vehicle vibration response to ground excitation

218

Influence of sward height and advancing season on rumen fermentation in Merino sheep grazing grass/white clover pasture

219

Influence of sward maturity and pre-conditioning temperature on the energy production from grass silage through the integrated generation of solid fuel and biogas from biomass (IFBB): 1. The fate of mineral compounds

220

Influence of sward maturity and pre-conditioning temperature on the energy production from grass silage through the integrated generation of solid fuel and biogas from biomass (IFBB): 2. Properties of energy carriers and energy yield

221

Influence of sward structure on daily intake and foraging behaviour by horses

222

Influence of Sweet Potato/Maize Association on Ecological Properties and Crop Yields in Swaziland

223

Influence of sweetened chewing gum on appetite, meal patterning and energy intake

224

Influence of sweeteners on the viscoelasticity of hydrocolloids gelled systems

225

Influence of swelling of vegetable particles on structure and rheology of starch matrices Original Research Article

226

Influence of swelling on water transport through PVA-based membrane

227

Influence of swing leg movement on running stability

228

Influence of swirl number and fuel equivalence ratio on NO emission in an experimental LPG-fired chamber

229

Influence of swirl on the stability of a rod in annular leakage flow

230

Influence of switching conditions on the VFTO magnitudes in a GIS

231

Influence of switching-waveform characteristics on the performance of a single-layer-phase switched

232

Influence of Syllable Train Length and Performance End Effects on Estimation of Phonation Threshold Pressure

233

Influence of syllable-coda voicing on the acoustic properties of syllable-onset /l/ in English

234

Influence of symmetric benzene–polycarboxylate acids on the structures of silver-aminopyrimidyl derivative system

235

Influence of sympathetic activation on the control of masticatory movements

236

Influence of sympathetic autonomic arousal on tics: Implications for a therapeutic behavioral intervention for Tourette syndrome

237

Influence of sympathetic tone on heart rate during vagal stimulation and nitroprusside induced hypotension in ovine fetus

238

Influence of Symptoms and Age on the Predictive Value of Coronary Artery Calcium Scanning

239

Influence of synbiotic containing Lactobacillus acidophilus La5, Bifidobacterium lactis Bb 12, Streptococcus thermophilus, Lactobacillus bulgaricus and oligofructose on gut barrier function and sepsis in critically ill patients: a randomised controlled tr

240

Influence of synergistic effect on the selective catalytic reduction process NOx−CnHm/O2 on zeolites

241

Influence of syngas composition on the transient behavior of a Fischer–Tropsch continuous slurry reactor

242

Influence of synoptic and mesoscale meteorology on ozone pollution potential for San Joaquin Valley of California

243

Influence of synoptic weather conditions on the aerosol size distribution at the high-alpine site Jungfraujoch

244

Influence of synthesis and calcination temperatures on particle size and ethanol sensing behaviour of chemically synthesized SnO2 nanostructures

245

Influence of synthesis and sintering parameters on the characteristics of carbonate apatite

246

Influence of synthesis condition on product formation: hydrothermal auto-oxidated synthesis of five copper halides with ratio of Cu(I)/Cu(II) in 1:1, 2:1, 3:1, 4:1 and 1:0

247

Influence of synthesis conditions on structural properties of MCM-48 Original Research Article

248

Influence of synthesis conditions on the electrochemical properties of nanostructured amorphous manganese oxide cryogels

249

Influence of synthesis conditions on the microstructure of Li–Ta–Ti–O microsheets by molten salt method

250

Influence of synthesis conditions on the preparation of zirconia powder by the glycothermal method

251

Influence of synthesis conditions on the properties of electrochemically synthesized BaTiO3 nanoparticles

252

Influence of synthesis gel composition on morphology, composition, and dehydration performance of CHA-type zeolite membranes

253

Influence of synthesis methodology on the ionic transport properties of BaSnF4

254

Influence of synthesis methods and calcination temperature on electrical properties of La1−xCaxMnO3 (x=0.33 and 0.28) ceramics

255

Influence of synthesis parameters on morphology and phase composition of porous titania layers prepared via water based chemical solution deposition

256

Influence of synthesis parameters on NaA zeolite crystals

257

Influence of synthesis parameters on the catalytic activity of hierarchical SAPO-5 in space-demanding alkylation reactions

258

Influence of synthesis parameters on the electrical and structural properties of nanostructured BPO4–Li2O

259

Influence of synthesis parameters on the growth of CdS nanoparticles in colloidal solution and determination of growth kinetics using Karhunen–Loeve decomposition

260

Influence of synthesis parameters on the properties of nanostructured γ-Alumina using plackett-burman experimental design

261

Influence of synthesis parameters on the structure of boehmite sol particles

262

Influence of synthesis process on the AC response of PLZT (8/65/35) ferroelectric ceramics

263

Influence of synthesis process on the dielectric properties of B-doped SiC powders

264

Influence of synthesis route and composition on electrical properties of La9.33 + xSi6O26 + 3x/2 oxy-apatite compounds

265

Influence of synthesis route on electrical and electrochemical properties of Nd1.8Sr0.2NiO4 + δ

266

Influence of synthesis route on morphology and electrical properties of LaNi0.6Fe0.4O3

267

Influence of synthesis route on the catalytic properties of La1−xSrxMnO3

268

Influence of synthesis routes on the performance from weakly agglomerated yttria-stabilized zirconia nanomaterials

269

Influence of synthesis temperature on electrochemical polymerization of o-anisidine on low carbon steel

270

Influence of synthesis temperature on the structural characteristics of mesoporous silica

271

Influence of synthesis temperature on ZnO nanostructure morphologies and field emission properties

272

Influence of synthesized nano-ZnO on cure and physicomechanical properties of SBR/BR blends

273

INFLUENCE OF SYNTHETIC AND BIOHERBICIDES ON MANAGEMENT OF HORSE PURSLANE (Trianthema portulacastrum L.)

274

Influence of synthetic parameters on structural and catalytic properties of sulfated zirconia nanoparticles prepared by employing sulfate-containing anion surfactants via one-step route

275

Influence of synthetic routes on the conformational order and mobility of C18 and C30 stationary phases

276

Influence of synthetic surfactants on the uptake of Pd, Cd and Pb by the marine macroalga, Ulva lactuca

277

Influence of system integration options on the performance of an integrated gasification combined cycle power plant

278

Influence of System Parameters on Main Rotor Response

279

Influence of system variables on the morphological and dynamic mechanical behavior of polydimethylsiloxane based segmented polyurethane and polyurea copolymers: a comparative perspective

280

Influence of systolic blood pressure and body mass index on left ventricular structure in healthy African-American and white young adults: the CARDIA study

281

Influence of T shape baffles arrangement on flow hydraulic characteristics in fishways

282

Influence of Ta, Y substitutions on the thermal stability, microhardness and magnetic properties of melt spun Fe–B–Si amorphous alloys

283

Influence of Ta2O5 on the electrical properties of ZnO- and CoO-doped SnO2 varistors

284

Influence of TaCl5 partial pressure on texture structure of TaC coating deposited by chemical vapor deposition

285

Influence of tacticity on solubility of propene monomer in isotactic and syndiotactic polypropylene

286

Influence of talc concentration in oil lubricant on the wear response of a bronze journal bearing

287

Influence of tall oil biodiesel with Mg and Mo based fuel additives on diesel engine performance and emission

288

Influence of tamarind seed xyloglucan on rheological properties and thermal stability of tapioca starch Original Research Article

289

Influence of tamoxifen on proliferation of human osteoblasts in vitro

290

Influence of tannic acid application on alfalfa hay: in vitro rumen fermentation, serum metabolites and nitrogen balance in sheep

291

Influence of tannic acid in Leacril/Rhodamine B system: Thermodynamics aspects

292

INFLUENCE OF TANNIN ON CHEMICAL COMPOSITION AND SENSORY PROPERTIES OF VRANAC WINE

293

Influence of tantalum additions on the microstructure and shape memory response of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy

294

Influence of Taoism on the invention of the purple pigment used on the Qin terracotta warriors

295

Influence of tape cast parameters on texture formation in alumina by templated grain growth

296

Influence of tapes’ properties on the laser cutting process

297

Influence of target power density and substrate bias voltage on the electrochemical properties of type 304 SS films prepared by unbalanced magnetron sputtering

298

Influence of target to substrate spacing on the properties of ITO thin films

299

Influence of taro (Colocasia esculenta L. Shott) growth conditions on the phenolic composition and biological properties

300

Influence of tartaric acid on diffusion coefficients of BiIII, SbIII, TeIV in aqueous medium: Application of electrodeposition of thermoelectric films

301

Influence of Task Complexity on Manual Asymmetries

302

Influence of task complexity on mechanical efficiency and propulsion technique during learning of hand rim wheelchair propulsion

303

Influence of task-related ipsilateral hand movement on motor cortex excitability

304

Influence of tautomerism of mono- and disaccharides on their glass transition temperatures

305

Influence of taxol and CNTs on the stability analysis of protein microtubules

306

Influence of taxonomic and numerical resolution on the analysis of temporal changes in phytoplankton communities

307

Influence of taxonomic determination level on several community indices

308

Influence of Tb incorporation on the structural and the optical properties of ZnO nanoparticles

309

Influence of t-butanol and of pH on hydrodynamic and mass transfer parameters in an ozonation process

310

Influence of t-butanol on multicomponent reaction kinetics and mass transfer in p-nitrophenol ozonation at low pH

311

Influence of TCO dry etching on the properties of amorphous-silicon solar cells

312

Influence of TCP phase and its morphology on creep properties of single crystal nickel-based superalloys

313

Influence of TCSC on congestion and spot price in electricity market with bilateral contract

314

Influence of Te doping on the perovskite manganite La0.5Ca0.5MnO3

315

Influence of tea extract supplementation on bifidobacteria during soymilk fermentation

316

Influence of TEA2O/SiO2 ratio on the polymorph formation and crystallization of zeolite beta

317

Influence of Teacher Education Processes on the Professional Identities of Information and Communication Technologies Teacher Candidates

318

Influence of teacher empowerment on teachers’ organizational commitment, professional commitment and organizational citizenship behavior in schools

319

Influence of Teachers Feedback Discourses on EFL Learners Academic Self-Concept, Attributions, L2 Speaking, Class Performance, and L2 Achievement: Confirmatory Feedback in Focus

320

Influence of tebuconazole residues on the aroma composition of Mencيa red wines

321

Influence of technical processing units on chemical composition and antimicrobial activity of carrot (Daucus carrot L.) juice essential oil

322

Influence of technical processing units on polyphenols and antioxidant capacity of carrot (Daucus carrot L.) juice

323

Influence of technical refinement on biliary complications of donors of living donor liver transplantation: a retrospective comparative study

324

Influence of technique of coronary artery implantation on long-term results in composite aortic root replacement

325

Influence of technological conditions of sausage fermentation on the aminogenic activity of L. curvatus CTC273 Original Research Article

326

Influence of technological parameters of permanent mold casting and die casting on creep and strength of Mg alloy AZ91D

327

Influence of technological parameters of permanent mold casting and die casting on creep and strength of Mg alloy AZ91D

328

Influence of technological processes on phenolic compounds, organic acids, furanic derivatives, and antioxidant activity of whole-lemon powder

329

Influence of technological processing on apple aroma analysed by high resolution gas chromatography–mass spectrometry and on-line gas chromatography-combustion/pyrolysis-isotope ratio mass spectrometry

330

Influence of technological processing parameters on the properties of carbon filled thermoplastics

331

Influence of technological texture on electrical properties of industrial ceramics Original Research Article

332

INFLUENCE OF TECHNOLOGY OF GROWING ON YIELD AND OILCHEMICAL COMPOSITION OF LINSEED IN NON-CHERNOZEMZONE OF RUSSIA

333

Influence of technology, storage and exposure on components of extra virgin olive oil (Bosana cv) from whole and de-stoned fruits

334

Influence of tectonic structures on the Hope Slide, British Columbia, Canada

335

Influence of Teflon® agglutinator on TLD spodumene pellets

336

Influence of TEGDMA on the mammalian cell cycle in comparison with chemotherapeutic agents

337

Influence of telomere length on short-term recovery after allogeneic stem cell transplantation

338

Influence of temperature and aging time on hardness and magnetic properties of the maraging steel grade 300

339

Influence of temperature and alkalinity on the hydrolysis rate of borohydride ions in aqueous solution

340

Influence of temperature and alumina catalyst on pyrolysis of corncob

341

Influence of temperature and background electrolyte on the sorption of neptunium(V) on Opalinus Clay

342

Influence of temperature and C4 abundance on n-alkane chain length distributions across the central USA

343

Influence of temperature and concentration on biosynthesis and characterization of zinc oxide nanoparticles using cherry extract

344

Influence of temperature and concentration on the sintering behavior and mechanical properties of hydroxyapatite Original Research Article

345

Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon

346

Influence of temperature and current density on oxygen overpotential and corrosion rate of Pb–Co3O4, Pb–Ca–Sn, and Pb–Sb anodes for copper electrowinning: Part I

347

Influence of temperature and degree of hydrolysis on the peptide composition of trypsin hydrolysates of β-lactoglobulin: Analysis by LC–ESI-TOF/MS

348

Influence of temperature and drought on seasonal and interannual variations of soil, bole and ecosystem respiration in a boreal aspen stand

349

Influence of temperature and electrolyte on the performance of activated-carbon supercapacitors

350

Influence of temperature and electrolyte saturation on rate and efficiency of oxygen cycle in VRLAB

351

Influence of temperature and elevated carbon dioxide on the production of dimethylsulfoniopropionate and glycine betaine by marine phytoplankton

352

Influence of temperature and ENSO events on the growth of the deep demersal fish alfonsino, Beryx splendens, off New Caledonia in the western tropical South Pacific Ocean

353

Influence of temperature and food source on the life cycle of the earthworm Dendrobaena veneta (Oligochaeta)

354

Influence of temperature and H2 adsorption on the structure of silica-supported gold subnanometer clusters

355

Influence of temperature and heating rate on the fixed bed pyrolysis of meat and bone meal

356

Influence of temperature and humidity on bakelite resistivity

357

Influence of temperature and humidity on bakelite resistivity

358

Influence of temperature and hydrodynamic conditions on the corrosion behavior of AISI 316L stainless steel in pure and polluted H3PO4: Application of the response surface methodology

359

Influence of temperature and hydrogen pressure on the hydriding/dehydriding behavior of Ti-doped sodium aluminum hydride

360

Influence of temperature and hydrostatic pressure during equal-channel angular pressing on the microstructure of commercial-purity Ti

361

Influence of temperature and hydrostatic pressure during equal-channel angular pressing on the microstructure of commercial-purity Ti

362

Influence of temperature and hydrostatic pressure during equal-channel angular pressing on the microstructure of commercial-purity Ti

363

Influence of temperature and ion kinetic energy on surface morphology of CeO2 films prepared by dual plasma deposition

364

Influence of temperature and ion kinetic energy on surface morphology of CeO2 films prepared by dual plasma deposition

365

Influence of temperature and ion kinetic energy on surface morphology of CeO2 films prepared by dual plasma deposition

366

Influence of temperature and irradiance on triple-junction solar subcells

367

Influence of temperature and layers on the characterization of ITO films

368

INFLUENCE OF TEMPERATURE AND LIGHT CONDITIONS TO COLONY GROWTH OF BROWN ROT FUNGI OF STONE FRUITS IN MONTENEGRO

369

Influence of temperature and load forecast uncertainty on estimates of power generation production costs

370

Influence of temperature and microstructure on the mechanical properties of sintered nanosilver joints

371

Influence of temperature and mixture stratification on HCCI combustion using chemiluminescence images and CFD analysis

372

Influence of Temperature and Moisture on the Compressive Strength of Carbon Fiber Reinforced Polymers

373

Influence of temperature and NaCl on the release in aqueous liquid media of aroma compounds encapsulated in edible films Original Research Article

374

Influence of temperature and nature of photoinitiator on the formation kinetics of an interpenetrating network photocured from an epoxide/methacrylate system

375

Influence of temperature and notch root radius on the fracture toughness of a dispersion-strengthening aluminium alloy

376

Influence of temperature and oil-to-surfactant ratio on micellar growth in aqueous solutions of C12E5 with decane

377

Influence of temperature and optical confinement on threshold current of an InGaAs/InP quantum wire laser

378

Influence of temperature and osmotic potential on germination of Allenrolfea occidentalis seeds

379

Influence of temperature and particle size on the fixed bed pyrolysis of orange peel residues

380

Influence of temperature and particle size on the fixed bed pyrolysis of orange peel residues

381

Influence of temperature and permeate recovery on energy consumption of a reverse osmosis system Original Research Article

382

Influence of temperature and pH on biomass production and protein biosynthesis in a putative Spirulina sp.

383

Influence of temperature and pH on Saccharomyces bayanus var. uvarum growth; impact of a wine yeast interspecific hybridization on these parameters

384

Influence of temperature and pH on survival of Escherichia coli O157:H7 in dry foods and growth in reconstituted infant rice cereal

385

Influence of Temperature and pH on the Nonenzymatic Reduction of Triphenyltetrazolium Chloride

386

Influence of temperature and pH on the quality of metastable iron phases produced in zinc-rich solutions

387

Influence of temperature and post weld heat treatment on tensile stress–strain and work hardening behaviour of modified 9Cr–1Mo steel

388

Influence of temperature and precipitation on decadal Baltic Sea level variations in the 20th century

389

Influence of temperature and precursor concentration on the synthesis of HDA-capped Ag2Se nanoparticles

390

Influence of temperature and pressure during PGSS™ micronization and storage time on degree of crystallinity and crystal forms of monostearate and tristearate

391

Influence of temperature and pressure on narrow-band fluorescence of 1,8-diphenyloctatetraene in solid crystalline solutions

392

Influence of temperature and pressure on the static contact resistance of vacuum heat-treated polyacrylonitrile films

393

Influence of temperature and properties variation on nanofluids in building heating

394

Influence of temperature and relative humidity on early bond strengths to dentine

395

Influence of temperature and relative humidity on the immobilized lactoperoxidase system in a functional chitosan film

396

Influence of temperature and salinity on heavy metal uptake by submersed plants

397

Influence of temperature and salt concentration on the salt weathering of a sedimentary stone with sodium sulphate

398

Influence of temperature and shear rate on the rheology and processability of reprocessed ABS in injection molding process

399

Influence of temperature and strain rate on tensile properties of single walled carbon nanotubes reinforced Sn–Ag–Cu lead free solder alloy composites

400

Influence of temperature and strain rate on the flow stress of an FeAl alloy

401

Influence of temperature and strain rate on the flow stress of an FeAl alloy

402

Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress

403

Influence of Temperature and Strain Rate on the Mechanical Properties of B83 Babbitt with Different Structures

404

Influence of temperature and substrate conditions on the omt-1 gene expression of Aspergillus parasiticus in relation to its aflatoxin production

405

Influence of temperature and surface kind on biofilm formation by Staphylococcus aureus from food-contact surfaces and sensitivity to sanitizers

406

Influence of temperature and surfactant on Escherichia coli inactivation in aqueous suspensions treated by moderate pulsed electric fields

407

Influence of temperature and temperature difference in the performance of forward osmosis desalination process

408

Influence of temperature and temperature shock on sludge properties, cake layer structure, and membrane fouling in a submerged anaerobic membrane bioreactor

409

Influence of temperature and thiosulfate on the corrosion behavior of steel in chloride solutions saturated in CO2

410

Influence of temperature and time on reduction behavior in iron ore–coal composite pellets

411

influence of temperature and time parameters on solution mixing and drying for membrane synthesis of copolymer (polyether-block-amide)

412

Influence of Temperature and Time Parameters on Solution Mixing and Drying for Membrane Synthesis of Copolymer (Polyether-Block-Amide)

413

Influence of temperature and uranium on the radiation stability of zircon

414

Influence of temperature and UVR on photosynthesis and morphology of four species of cyanobacteria

415

Influence of temperature and vegetation cover on soluble inorganic and organic nitrogen in a spodosol

416

Influence of temperature and vegetation cover on soluble inorganic and organic nitrogen in a spodosol

417

Influence of temperature and water activity on the antagonism of Trichoderma harzianum to Verticillium and Rhizoctonia

418

Influence of temperature annealing on optical properties of SrTiO3/BaTiO3 multilayered films on indium tin oxide

419

Influence of temperature change on microstructure evolution in Ni alloys irradiated with neutrons

420

Influence of Temperature Change on Modal Analysis of Rotary Functionally Graded Nano-beam in Thermal Environment

421

Influence of temperature cycles on the microstructures and mechanical properties of the partially melted zone in the fusion welded joints of 2219 aluminum alloy

422

Influence of temperature decrease and soil drought on the geochemical fractionation of 60Co and 137Cs in fluvisol and cambisol soils

423

Influence of Temperature Dependence of Electrical Conductivity of Graphite Crucible in Czochralski Crystal Growth: A Numerical Analysis

424

Influence of temperature dependent morphology on localized surface plasmon resonance in ultra-thin silver island films

425

Influence of temperature dependent properties on cooling behavior of cylindrical steels

426

Influence of temperature distributions in EHL film on its thickness under high slip ratio conditions

427

Influence of temperature during pressure-assisted induction sintering (PAIS) on structure and properties of the Fe40Al intermetallic phase

428

Influence of temperature elevation on the sealing performance of a potential buffer material for a high-level radioactive waste repository

429

Influence of temperature field on the microstructure of low carbon microalloyed ferrite–bainite dual-phase steel during heat treatment

430

Influence of temperature gradient to solidification velocity ratio on the structure transformation in pulsed- and CW-laser surface treatment

431

Influence of temperature humidity index on skin temperature of west African dwarf goats raised in Nigeria

432

Influence of temperature humidity index on skin temperature of West African Dwarf goats raised in Nigeria

433

Influence of temperature in arc-activated plasma nitriding of maraging steel in solution annealed and aged conditions

434

Influence of temperature in roost selection by Pipistrellus pygmaeus (Chiroptera): relevance for the design of bat boxes Original Research Article

435

Influence of temperature in the kinetics of the gas-phase reactions of a series of acetates with Cl atoms

436

Influence of temperature inhomogeneities on knocking combustion

437

Influence of temperature inhomogeneity on product profile of reactions occurring within zeolites

438

Influence of temperature inversions on wet-cooling tower performance

439

Influence of temperature of precipitation on agglomeration and other powder characteristics of ammonium diuranate

440

Influence of temperature of sub-zero treatments on the wear behaviour of die steel

441

Influence of temperature on a carbon–fibre epoxy composite subjected to static and fatigue loading under mode-I delamination

442

Influence of Temperature on AC Conductivity of Nanocrystalline CuAlO2

443

Influence of temperature on AC conductivity of nanocrystalline CuAlO2

444

Influence of Temperature on Alloy 31 in Abrasion- Corrosion Conditions of Phosphoric Acid Medium

445

Influence of temperature on anionic surface active agent removal from a water solution by ultrafiltration Original Research Article

446

Influence of temperature on biological phosphorus removal: process and molecular ecological studies

447

Influence of temperature on biomass, iron metabolism and some related bioindicators in tomato and watermelon plants

448

Influence of temperature on charge transport and device parameters in an electrospun hybrid organic/inorganic semiconductor Schottky diode

449

Influence of temperature on corrosion rate and porosity of corrosion products of carbon steel in anoxic bentonite environment

450

Influence of temperature on crater and ejecta size following hypervelocity impact of aluminum alloy spheres on thick aluminum alloy targets

451

Influence of temperature on curative interactions with the participation of metal carboxylates as adhesive promoters: the interactions of Cu(II) hexadecanoate with stearic acid, N,N′-dicyclohexylbenzothiazole-2-sulfenamide, sulfur and zinc oxide

452

Influence of temperature on cyclic stress response, strain resistance, and fracture behavior of aluminum alloy 2524

453

Influence of temperature on cyclic stress response, strain resistance, and fracture behavior of aluminum alloy 2524

454

Influence of temperature on cytochrome P450 1A in dab (Limanda limanda) from the Southern North Sea: Results from field surveys and a laboratory study

455

Influence of temperature on electrochemical remedial measures and complex deterioration due to chloride attack and ASR

456

Influence of temperature on energy band gap and other properties of undoped and cadmium doped manganese sulphide (MnS:Cd) synthesized for photovoltaic and optoelectronic application

457

Influence of temperature on expander stability and on the cycle life of negative plates

458

Influence of temperature on fixation of copper–ethanolamine-based wood preservatives

459

Influence of temperature on formaldehyde emission parameters of dry building materials

460

Influence of temperature on fracture initiation in PET and PA66 fibres under cyclic loading

461

Influence of temperature on fresh performance of self-consolidating concrete

462

Influence of temperature on growth and ajmalicine production by Catharantus roseus suspension cultures

463

Influence of temperature on heat transfer coefficient during moderate vacuum deep-fat frying Original Research Article

464

Influence of temperature on impact fracture behavior of an alloy steel

465

Influence of temperature on induction period and on ultimate porosity of hardening cement paste

466

Influence of temperature on infection, growth, and mycotoxin production by Fusarium langsethiae and F. sporotrichioides in durum wheat Original Research Article

467

Influence of Temperature on Life Table Parameters of the Predaceous Mite Euseius finlandicus (Oudemans) (Acari: Phytoseiidae)

468

Influence of temperature on liquid products yield of oil palm shell via subcritical water liquefaction in the presence of alkali catalyst

469

Influence of temperature on mass transfer in an incomplete trapping single hollow fibre supported liquid membrane extraction of triazole fungicides Original Research Article

470

Influence of temperature on microdomain organization of mixed cationic–zwitterionic lipidic monolayers at the air–water interface

471

Influence of temperature on mixture adsorption in carbon nanotubes: a grand canonical Monte Carlo study

472

Influence of temperature on Mx gene expression profiles and the protection of sevenband grouper, Epinephelus septemfasciatus, against red-spotted grouper nervous necrosis virus (RGNNV) infection after poly (I:C) injection

473

Influence of temperature on nonlinear dynamic characteristics of spiral-grooved gas-lubricated thrust bearing-rotor systems for microengine

474

Influence of temperature on PCDD/PCDF desorption from waste incineration flyash under nitrogen Original Research Article

475

Influence of temperature on phase stability and thermal conductivity of single- and double-ceramic-layer EB–PVD TBC top coats consisting of 7YSZ, Gd2Zr2O7 and La2Zr2O7

476

Influence of temperature on plane stress ductile fracture of poly(ethylene terephthalate) film

477

Influence of temperature on plant–rhizobacteria interactions related to biocontrol potential for suppression of fusarium wilt of chickpea

478

Influence of temperature on production of water-in-oil emulsions by microchannel emulsification

479

Influence of temperature on pyrolysis of recycled organic matter from municipal solid waste using an activated olivine fluidized bed

480

Influence of temperature on rearrangement of martensite variants by magnetic field in Fe3Pt

481

Influence of temperature on rotational diffusion of dipolar laser dyes in glycerol

482

Influence of temperature on sorption of europium onto smectite: The role of organic contaminants

483

Influence of temperature on stability of trapped flux magnets Original Research Article

484

Influence of temperature on structure as well as adhesion and friction and wear behavior of hydrogenated carbon nitride films prepared on silicon substrate

485

Influence of temperature on styrene emission from a vinyl ester resin thermoset composite material Original Research Article

486

Influence of Temperature on Survivorship and Growth Performance of Heteroclarias Fingerlings under Laboratory Conditions

487

Influence of temperature on tensile and fatigue behavior of nanoscale copper using molecular dynamics simulation Original Research Article

488

Influence of temperature on the (liquid + liquid) equilibria of {methanol + benzene + hexane} ternary system

489

Influence of temperature on the accumulation and retention of 11 radionuclides by the marine alga Fucus vesiculosus (L.)

490

Influence of temperature on the algorithm to define salty water-in-oil flow characteristics

491

Influence of temperature on the behavior of carbon fiber fabrics reinforced PPS laminates

492

Influence of temperature on the behaviour of INTEGRAL n-type HPGe detectors irradiated with fast neutrons

493

Influence of temperature on the behaviour of INTEGRAL n-type HPGe detectors irradiated with fast neutrons

494

Influence of temperature on the behaviour of small linear peptides in capillary electrochromatography

495

Influence of temperature on the chemical removal of 3-methylbutanal, trans-2-methyl-2-butenal, and 3-methyl-2-butenal by OH radicals in the troposphere

496

Influence of temperature on the colloidal processing of electrostatically stabilised alumina suspensions

497

Influence of temperature on the compaction of an organic powder and the mechanical strength of tablets

498

Influence of temperature on the corrosion behavior of API-X100 pipeline steel in 1-bar CO2-HCO3− solutions: An electrochemical study

499

Influence of temperature on the dielectric and ferroelectric properties of bismuth titanate thin films obtained by the polymeric precursor method

500

Influence of temperature on the distribution of gaseous products from pyrolyzing palm oil wastes

501

Influence of temperature on the drying kinetics, physicochemical properties, and antioxidant capacity of Aloe Vera (Aloe Barbadensis Miller) gel Original Research Article

502

Influence of temperature on the electrochemical characteristics of Bi(1 1 1)|ionic liquid interface

503

Influence of temperature on the electrochemical characteristics of MmNi3.03Si0.85Co0.60Mn0.31Al0.08 hydrogen storage alloys

504

Influence of temperature on the fatigue strength of compressed-hydrogen tanks for vehicles

505

Influence of temperature on the forming limit diagrams of sintered P/M preforms of steel

506

Influence of temperature on the fretting response between AISI 301 stainless steel and AISI 52100 steel

507

Influence of temperature on the growth of surface oxides on palladium electrodes

508

Influence of temperature on the hydration products of low pH cements

509

Influence of temperature on the hydro-mechanical behaviour of a compacted bentonite

510

Influence of temperature on the hygropreference of the Collembolan, Cryptopygus antarcticus, and the mite, Alaskozetes antarcticus from the maritime Antarctic

511

Influence of temperature on the initiation of adhesive wear with respect to deep drawing of aluminum-alloys

512

Influence of temperature on the insecticidal effect of Beauveria bassiana in combination with diatomaceous earth against Rhyzopertha dominica and Sitophilus oryzae on stored wheat

513

Influence of temperature on the I-V and C-V characteristics of Si detectors irradiated at high fluences

514

Influence of temperature on the I-V and C-V characteristics of Si detectors irradiated at high fluences

515

Influence of temperature on the liquid–liquid equilibria containing two pairs of partially miscible liquids. Water+nitromethane+1-butanol ternary system

516

Influence of temperature on the liquid–liquid equilibria containing two pairs of partially miscible liquids: Water+furfural+1-butanol ternary system

517

Influence of temperature on the liquid-to-liquid extraction of 1-propanol from aqueous solutions containing nitromethane

518

Influence of temperature on the liquid-to-liquid extraction of 4-hydroxy-4-methyl-2-pentanone from aqueous solutions with benzyl alcohol

519

Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr–1Mo ferritic steel

520

Influence of temperature on the magnetic moments of Fe clusters in an Ag matrix

521

Influence of temperature on the magnetic moments of Fe clusters in an Ag matrix

522

Influence of temperature on the mechanical behaviour of polyester fibres

523

Influence of temperature on the morphology and photocatalytic activity of ZnGa2O4 crystallites prepared by hydrothermal method

524

Influence of temperature on the motility of Pseudomonas oryzihabitans and control of Globodera rostochiensis

525

Influence of temperature on the motility of Pseudomonas oryzihabitans and control of Globodera rostochiensis

526

Influence of temperature on the oxidation/corrosion process of F82Hmod. martensitic steel in lead–bismuth

527

Influence of temperature on the permeability of polyacrylamide hydrogels and semi-IPNs with poly(N-isopropylacrylamide)

528

Influence of temperature on the photoluminescence efficiency of chalcogenide GeS2–Ga2S3–Er2S3 glasses

529

Influence of temperature on the physiological responses of the bivalve Brachidontes striatulus and its significance in fouling control

530

Influence of Temperature on the Product Selectivity and Distribution of Aromatics and C8 Aromatic Isomers in the Conversion of Dilute Ethene over H-Galloaluminosilicate (ZSM-5 type) Zeolite

531

Influence of temperature on the reduction kinetics of Zn2+ at a mercury electrode

532

Influence of temperature on the reduction mechanism of Ti(III) ions on iron in the LiF–NaF–KF eutectic melt and on the electrochemical behavior of the resultant titanium coatings

533

Influence of Temperature on the Regulation and Toxicity of Zinc inFolsomia candida(Collembola)

534

Influence of temperature on the release of inorganic species during high temperature gasification of Rhenish lignite

535

Influence of temperature on the response of high-quality polycrystalline diamond detectors

536

Influence of temperature on the response of high-quality polycrystalline diamond detectors

537

Influence of temperature on the sensitivity and signal-to-noise ratio of a fiber-optic surface-plasmon resonance sensor

538

Influence of temperature on the upper bound: Theoretical considerations and comparison with experimental results

539

Influence of temperature on the visco-elastic properties of direct and indirect dental composite resins

540

Influence of temperature on thermal conductivity, thermal capacity and thermal diffusivity for different types of rock

541

Influence of Temperature on Thermodynamic Properties of Methyl t -Butyl Ether (MTBE) + Gasoline Additives

542

Influence of temperature on thermodynamics of ethers + xylenes

543

Influence of temperature on thermophysical properties of ammonium ionic liquids with N-methyl-2-pyrrolidone

544

Influence of temperature on threshold stress for reorientation of hydrides and residual stress variation across thickness of Zr–2.5Nb alloy pressure tube

545

Influence of temperature on viscous flow deformation of Zr55Cu30Al10Ni5 bulk glassy alloy in supercooled liquid region

546

Influence of temperature on wetting properties of thin films in organic solar cells applications

547

Influence of temperature on wideband water spectra: Semi-phenomenological calculation

548

Influence of temperature on yield value of highly flowable micromortars made with sulfonate-based superplasticizers

549

Influence of temperature pre-treatment and high-molar saline solutions on the adsorption capacity of organo-clay minerals

550

Influence of Temperature Pulse on a Nickel Microbeams under Couple Stress Theory

551

Influence of Temperature Regime on Nickel Kinetics in Two Alluvial Soils from Arid Region

552

Influence of temperature schedules on particle size and crystallinity of titania synthesized by vapor-phase oxidation route

553

Influence of temperature shifts on survival, growth, and toxin production by psychrotrophic and mesophilic strains of Bacillus cereus in potatoes and chicken gravy

554

Influence of temperature stability on the sensing properties of SAW NOx sensor

555

Influence of temperature to the short-term effects of various ozone metrics on daily mortality in Suzhou, China

556

Influence of temperature, carbon precursor/copolymer ratio and acid concentration on adsorption and structural properties of mesoporous carbons prepared by soft-templating

557

Influence of temperature, cement type and level of concrete consolidation on chloride ingress in conventional and high-strength concretes

558

Influence of temperature, cold deformation and a constant mechanical load on the microstructural stability of a nitrogen alloyed duplex stainless steel

559

Influence of temperature, current and number of cycles on the efficiency of the closed oxygen cycle in VRLA batteries

560

Influence of temperature, electrical conductivity, power and pH on ascorbic acid degradation kinetics during ohmic heating using stainless steel electrodes

561

Influence of Temperature, Metal Ions and Organic Solvents on Extracellular Glucansucrase Activity of Leuconostoc mesenteroides AA1

562

Influence of temperature, oxygen and salinity on the metabolism of the European sea bass

563

Influence of temperature, pH and ionic strength on the production of isoflavone-rich soy protein isolates

564

Influence of temperature, pH and NaCl concentration on the maximal growth rate of Brochothrix thermosphacta and a bioprotective bacteria Lactococcus piscium CNCM I-4031 Original Research Article

565

Influence of temperature, pH and simulated biological solutions on swelling and structural properties of biomineralized (CaCO3) PVP–CMC hydrogel

566

Influence of temperature, pH and simulated biological solutions on swelling and structural properties of biomineralized (CaCO3) PVP–CMC hydrogel

567

Influence of temperature, pH and yeast on in-field production of ethanol from unsterilized sweet sorghum juice

568

Influence of temperature, rainfall and wind trends on grass pollination in Malaga (western Mediterranean coast)

569

Influence of temperature, ripening time and calcination on the morphology and crystallinity of hydroxyapatite nanoparticles

570

Influence of temperature, salinity and nutrient limitation on yessotoxin production and release by the dinoflagellate Protoceratium reticulatum in batch-cultures

571

Influence of temperature, strain rate and specimen geometry on the microscopic cleavage fracture stress

572

Influence of temperature, strain rate and specimen geometry on the microscopic cleavage fracture stress

573

Influence of temperature, strain rate and specimen geometry on the microscopic cleavage fracture stress Original Research Article

574

Influence of temperature, time and different media on mesenchymal stromal cells shipped for clinical application

575

Influence of temperature, time, liquid/solid ratio and sulfuric acid concentration on the hydrolysis of palm empty fruit bunches

576

Influence of temperature, water activity and pH on growth of some xerophilic fungi

577

Influence of temperature-induced coalescence effects on co-continuous morphology in poly(ε-caprolactone)/polystyrene blends

578

Influence of temperature–pressure treatment on heavily hydrogenated silicon surface§

579

Influence of Tempering Process on Mechanical Properties of 00Cr13Ni4Mo Supermartensitic Stainless Steel Original Research Article

580

Influence of tempering temperature upon precipitate phases in a 11%Cr ferritic/martensitic steel

581

Influence of tempering with ozonated water on the selected properties of wheat flour Original Research Article

582

Influence of template synthesis on the performance of polyaniline cathodes

583

Influence of TEMPO-mediated oxidation on the lignin of thermomechanical pulp

584

Influence of TEMPO-oxidized cellulose nanofibril length on film properties

585

Influence of temporal changes in relative humidity on dry deposition velocities and fluxes of aerosol particles bearing trace elements

586

Influence of temporal variability of rainfall on interception loss. Part I. Point analysis

587

Influence of temporal variations in water chemistry on the Pb isotopic composition of rainbow trout (Oncorhynchus mykiss)

588

Influence of temporary cement contamination on the surface free energy and dentine bond strength of self-adhesive cements

589

Influence of temporary cement contamination on the surface free energy and dentine bond strength of self-adhesive cements

590

Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads

591

Influence of tensile pre-strain and sensitization on martensite reversion mechanism in austenitic stainless steel

592

Influence of tensile pre-strain and sensitization on passive films in AISI 304 austenitic stainless steel

593

Influence of tension during oxidative stabilization on SO2 adsorption characteristics of polyacrylonitrile (PAN) based activated carbon fibers Original Research Article

594

Influence of terminal electron acceptor availability to the anodic oxidation on the electrogenic activity of microbial fuel cell (MFC)

595

Influence of termite infestation on the spatial variability of soil properties in the Guinea savanna region of Nigeria

596

Influence of termites on runoff and infiltration: quantification and analysis

597

Influence of terrain model smoothing and flight and sensor configurations on detection of small pioneer trees in the boreal–alpine transition zone utilizing height metrics derived from airborne scanning lasers

598

Influence of terrestrial vegetation on leaf wax δD of Holocene lake sediments

599

Influence of terrorism risk on foreign tourism decisions

600

Influence of tert-amine groups on the solubility of polymers in CO2

601

Influence of test conditions on modal characteristics of reinforced concrete structures under different damage scenarios

602

Influence of test methodology and probe geometry on nanoscale fatigue failure of diamond-like carbon film

603

Influence of test size, water depth, and ecology on Mg/Ca, Sr/Ca, δ18O and δ13C in nine modern species of planktic foraminifers

604

Influence of test specimen on experimental characterization of timber–concrete composite joints

605

Influence of testing method on the contact pressure distribution and its effect on coefficient of friction in polymeric bearings

606

INFLUENCE OF TESTING POSTURE AND ELBOW POSITION ON GRIP STRENGTH

607

Influence of testosteron and 17β-estradiol on human osteosarcoma cells in vitro

608

Influence of testosteron and 17β-estradiol on human osteosarcoma cells in vitro

609

Influence of Tet Reliability on the creening Performance of Frequency-Doubling Perimetry

610

Influence of tetraethylammonium bromide on phase inhomogeneity of disperse vanadium dioxide particles in matrix of polyethylene glycol

611

Influence of tetragonal distortion on magnetic and magneto-optical properties of copper ferrite films Original Research Article

612

Influence of tetrapod-shaped zinc oxide whisker on poly(vinylidene fluoride) based gel polymer electrolyte

613

Influence of text structure and prior knowledge of the learner on reading comprehension, browsing and perceived control

614

Influence of textile dyes on some morphological, biochemical and physiological characteristics of broad bean (Vicia faba L.)

615

Influence of textural and structural properties of Mgsingle bondAl and Mgsingle bondZnsingle bondAl containing hydrotalcite derived oxides on Cr(VI) adsorption capacity

616

Influence of textural and wettability variations on predictions of DNAPL persistence and plume development in saturated porous media

617

Influence of textural properties and trace water on the reactivity and deactivation of reconstructed layered hydroxide catalysts for transesterification of tributyrin with methanol

618

Influence of textural properties of activated carbons on Pd/carbon catalysts synthesis for cinnamaldehyde hydrogenation Original Research Article

619

Influence of texture and grain size on the room-temperature ductility and tensile behavior in a Mg–Gd–Zn alloy processed by rolling and forging

620

Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling Original Research Article

621

Influence of texture and grain structure on strain localisation and formability for AlMgSi alloys

622

Influence of texture and hydrostatic pressure on the room temperature compression of NiAl polycrystals

623

Influence of texture and hydrostatic pressure on the room temperature compression of NiAl polycrystals

624

Influence of texture and test velocity on the dynamic, high-strain, tensile behavior of zirconium Original Research Article

625

Influence of texture in bauxite residues on void ratio, water holding characteristics, and penetration resistance

626

Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5 wt.% NaCl

627

Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy

628

Influence of texture on electrical properties of ZnO ceramics prepared by extrusion and spark plasma sintering

629

Influence of texture on organic matter distribution and quality and nitrogen and sulphur status in semiarid Pampean grassland soils of Argentina

630

Influence of texture on superplastic behavior of friction stir processed ZK60 magnesium alloy

631

Influence of texture on the mechanical properties of commercially pure magnesium prepared by powder metallurgy

632

Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates

633

Influence of texture on twin boundary cracks in fatigued austenitic stainless steel

634

Influence of texture on twin boundary cracks in fatigued austenitic stainless steel

635

Influence of texture on twin boundary cracks in fatigued austenitic stainless steel

636

Influence of Tg, viscosity and chemical structure of monomers on shrinkage stress in light-cured dimethacrylate-based dental resins

637

Influence of thawing period on some post-thaw semen characteristics of Holstein bulls following catalase addition to Tris extender

638

Influence of the ˇSoˇstanj coal-fired thermal power plant on mercury and methyl mercury concentrations in Lake Velenje, Slovenia

639

Influence of the −514C/T polymorphism in the promoter of the hepatic lipase gene on postprandial lipoprotein metabolism

640

Influence of the 11 year solar cycle on annual streamflow maxima in Southern Canada

641

Influence of the 13C-enrichment of the habitual diet on a 13CO2 breath test used as an index of liver glycogen oxidation: a validation study in Western Europe and Africa

642

Influence of the 1991-1995 war on Croatian publications in the MEDLINE database

643

Influence of the 2′-Hydroxyl Group Conformation on the Stability of A-form Helices in RNA

644

Influence of the 27-day solar flux variations on the ionosphere parameters measured at Irkutsk in 2003–2005 Original Research Article

645

Influence of the 5D0 nucleon-Δ channel on the 1S0 nucleon-nucleon phase shift in a quark model

646

Influence of the ability to roll the tongue and tongue-training parameters on oral motor performance and learning

647

Influence of the ablation threshold fluence on laser-driven acceleration

648

Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

649

Influence of the absolute configuration at C-4 in the binding of d-myoinositol 1,4,5 trisphosphate analogues to IP3 receptor

650

Influence of the acid–base characteristics of inorganic fillers on the high temperature performance of composite membranes in direct methanol fuel cells

651

Influence of the acid–base properties in Si-MCM-41 and B-MCM-41 mesoporous materials on the activity and selectivity of ɛ-caprolactam synthesis Original Research Article

652

Influence of the acid–base properties of solid catalysts derived from hydrotalcite-like compounds on the condensation of formaldehyde and acetaldehyde Original Research Article

653

Influence of the acid–base properties over NiSn/MgO–Al2O3 catalysts in the hydrogen production from glycerol steam reforming

654

Influence of the acid–base/redox properties of TiOx-sepiolite supported vanadium oxide catalysts in the gas-phase selective oxidation of toluene

655

Influence of the acid–basic character of oxide surfaces in dispersants effectiveness

656

Influence of the acidity level on the electropolymerization of N-vinylcarbazole: Electrochemical study and characterization of poly(3,6-N-vinylcarbazole)

657

Influence of the acidity modification on the reactions of toluene and ethyl benzene disproportionation. Effect of Lewis acidic InO+ species introduced into Y zeolite Original Research Article

658

Influence of the activating solution composition on the stability and thermo-mechanical properties of inorganic polymers (geopolymers) from volcanic ash

659

Influence of the activation atmosphere on the hydrodesulfurization of Co-Mo/SBA-15 catalysts prepared from sulfur-containing precursors Original Research ArticleInfluence of the activation atmosphere on the hydrodesulfurization of Co-Mo/SBA-15 catalysts p

660

Influence of the activation conditions of bimetallic catalysts NM–Mo/γ-Al2O3 (NM=Pt, Pd and Ru) on the activity in HDT reactions Original Research Article

661

Influence of the Activation of NMDA Receptors on the Resting Membrane Potential of the Postsynaptic Cell at the Neuromuscular Junction

662

Influence of the activator concentration and calcium hydroxide addition on the properties of alkali-activated porcelain stoneware

663

Influence of the active area size and read-out method on the timing performance of SiPMs coupled to LYSO scintillators

664

Influence of the active area size and read-out method on the timing performance of SiPMs coupled to LYSO scintillators

665

Influence of the active layer thickness on the electrical properties of ZnO thin film transistors fabricated by radio frequency magnetron sputtering Original Research Article

666

Influence of the active phase structure Bi-Mo-Ti-O in the selective oxidation of propene

667

Influence of the adaptation of Listeria monocytogenes populations to structured or homogeneous habitats on subsequent growth on chilled processed meat

668

Influence of the addendum modification on spur gear efficiency

669

Influence of the addition of antioxidants in vivo on the fatty acid composition of fish fillets

670

Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics

671

Influence of the addition of fruit on the mineral content of yoghurts: nutritional assessment

672

Influence of the addition of grape seed procyanidins to Port wines in the resulting reactivity with human salivary proteins

673

Influence of the addition of grinding dust to a magnesium phosphate cement matrix

674

Influence of the addition of H2 upon the behavior and properties of a Pd(2 wt.%)/γ-Al2O3 catalyst and a comparison with the case of the Pt-based catalyst Original Research Article

675

Influence of the addition of LPG-reformate and H2 on an engine dually fuelled with LPG–diesel, –RME and –GTL Fuels

676

Influence of the addition of Mn and Cu on the nanocrystallization process of HITPERM Fe–Co–Nb–B alloys

677

Influence of the addition of Mn and Cu on the nanocrystallization process of HITPERM Fe–Co–Nb–B alloys

678

Influence of the addition of organic residues on carbohydrate content and structural stability of some highland soils in Ethiopia

679

Influence of the addition of promoters to steam reforming catalysts

680

Influence of the addition of PVP on the morphology of asymmetric polyimide phase inversion membranes: effect of PVP molecular weight

681

Influence of the addition of silicon on the structure and properties of chromium nitride coatings deposited by reactive magnetron sputtering assisted by RF plasmas

682

Influence of the addition of sulphur dioxide and must hyperoxidation on the phenolic fractions during vinification of Sherry wines

683

Influence of the addition of transglutaminase on the immunoreactivity of milk proteins and sensory quality of kefir

684

Influence of the addition of water to amorphous switching domains on the simulated shape-memory properties of poly(l-lactide)

685

Influence of the adhesion force crystal/heat exchanger surface on fouling mitigation

686

Influence of the adhesive thickness on a debonding – An asymptotic model

687

Influence of the adipate and dissolved oxygen concentrations on the β-lactam production during continuous cultivations of a Penicillium chrysogenum strain expressing the expandase gene from Streptomyces clavuligerus

688

Influence of the adjustable parameters of the DPD on the global and local dynamics of a polymer melt

689

Influence of the adjustable vane position on the flow and combustion characteristics of a down-fired pulverized-coal 300 MWe utility boiler

690

Influence of the administered mass of tellurium on plasma clearance in rabbits

691

Influence of the aerothermic parameters and the product quantity on the production capacity of an indirect solar dryer

692

Influence of the age and drying process on pore structure and sorption isotherms of hardened cement paste

693

Influence of the aggregate on the electrical conductivity of Portland cement concretes

694

Influence of the aging time of yttria stabilized zirconia slips on the cracking behavior during drying and green properties of cast tapes

695

Influence of the agitation rate on the treatment of partially soluble wastewater in anaerobic sequencing batch biofilm reactor

696

Influence of the air-water interface on hydrosol lidar operation

697

Influence of the alignment of CH+ ions in reactive collisions with H atoms at very low temperatures

698

Influence of the Alkali in Pt/Alkali-β Zeolite on the Pt Characteristics and Catalytic Activity in the Transformation of n-Hexane

699

Influence of the alkali metal salt on the properties of solid electrolytes derived from a Lewis acidic polyether

700

Influence of the alkaline delignification on the simultaneous saccharification and fermentation (SSF) of sugar cane bagasse

701

Influence of the alkoxide group, solvent, catalyst, and concentration on the gelation and porosity of hexylene-bridged polysilsesquioxanes

702

Influence of the alkyl chain length of alkyl glucosides on their ability to solubilize phosphatidylcholine liposomes

703

Influence of the alkyl group of zinc dialkyldithiophosphate on the frictional characteristics of molybdenum dialkyldithiocarbamate under sliding conditions

704

Influence of the alkyl-substituted silane precursor on sol–gel encapsulated lipase activity

705

Influence of the alloying effect on nickel K-shell fluorescence yield in Ni–Si alloys

706

Influence of the alloying effect on nickel K-shell fluorescence yield in Ni–Si alloys

707

Influence of the Alloying Elements on Uniform and Pitting Corrosion Events Induced by SCN- Anions on Al-6061 and Al-Cu Alloys Surfaces

708

Influence of the alumina surface orientation to the Rh particle growth and reconstruction

709

Influence of the alumina thickness at the interfaces on the fracture mechanisms of aluminium multilayer composites

710

Influence of the aluminum surface on the final results of a two-step anodizing

711

Influence of the Amazon River development and constriction of the Central American Seaway on Middle/Late Miocene oceanic conditions at the Ceara Rise

712

Influence of the Amazon River discharge on the biogeography of phytoplankton communities in the western tropical north Atlantic

713

Influence of the ambient gas in laser structuring of the titanium surface

714

Influence of the amendment of corn straw on the degradation behaviour of the fungicide dithianon in soil

715

Influence of the amination conditions on the textural properties and chromatographic behaviour of amino-functionalized glycidyl methacrylate-based particulate supports Original Research Article

716

Influence of the aminothiol structure on pervaporation dehydration of poly(thiol ester amide) composite membranes

717

Influence of the amorphous/crystalline silicon heterostructure properties on planar conductance measurements

718

Influence of the amount of absorbed moisture in nylon fibers on atmospheric pressure plasma processing

719

Influence of the amount of bed material on the distribution of biomass inorganic elements in a bubbling fluidised bed combustion pilot plant

720

Influence of the amount of KBF4 on the morphology of Mg2Si in Mg–5Si alloys

721

Influence of the amount of mixed recycled aggregates on the properties of concrete for non-structural use

722

Influence of the amount of Na2O and SiO2 on the sintering behavior and on the microstructural evolution of a Bayer alumina powder

723

Influence of the amount of recycled coarse aggregate in concrete design and durability properties

724

Influence of the amount of steaming during baking on the kinetic of heating and on selected quality attributes of bread Original Research Article

725

Influence of the analyzing window on electrode impedance measurement by the continuous frequency scanning method

726

Influence of the Angle of Cervical Convergence on Stresses to the PDL of Abutments: A 3D Analysis Using Finite Element Method

727

Influence of the anion on the kinetics and stability of a light-emitting electrochemical cell

728

Influence of the anion on the optoelectronic characteristics of triphenylsulfonium salts modified polymer light emitting devices

729

Influence of the anisotropic polarizability on the anomalous dielectric relaxation spectra

730

Influence of the anisotropy in lattice friction on the macroscopic behavior of magnesium single crystal: A study by discrete dislocation dynamics

731

Influence of the anisotropy of sheet materials on the accuracy of measuring of the Vickers hardness

732

Influence of the annealing atmosphere on structural, optical and magnetic properties of Co-doped ZnO microrods

733

Influence of the annealing conditions on the properties of InP thin films

734

Influence of the annealing conditions on the structure of BaCe1−xYxO3−α coatings elaborated by DC magnetron sputtering at room temperature

735

Influence of the annealing cooling rate on the microstructure evolution and deformation behaviours in the cold ring rolling of medium steel

736

Influence of the annealing in nitrogen atmosphere on the XRD, EDX, SEM and electrical properties of chemical bath deposited CdSe thin films

737

Influence of the Annealing Temperature on optical Properties of (CuInSe2) Thin Films

738

Influence of the annealing temperature on violet emission of ZnO films obtained by oxidation of Zn film on quartz glass

739

Influence of the annealing time on the structural properties for Flash evaporated InSb films

740

Influence of the annex on seismic behavior of historic churches

741

Influence of the anode material on the characteristics of an analytical glow discharge cell

742

Influence of the anode material on the characteristics of an analytical glow discharge cell

743

Influence of the anodic oxidation on the physicochemical properties of the Ti6Al4V ELI alloy

744

Influence of the anodic recirculation transient behaviour on the SOFC hybrid system performance

745

Influence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic oxide film

746

Influence of the antagonist material on the wear of different composites using two different wear simulation methods

747

Influence of the anti reflective coating on the electromigration resistance of 0.5 μm technology metal-2 line structures

748

Influence of the antiandrogen flutamide on the androgen receptor gene expression in the placenta and umbilical cord during pregnancy in the pig

749

Influence of the antioxidants vitamin E and idebenone on retinal cell injury mediated by chemical ischemia, hypoglycemia, or oxidative stress

750

Influence of the aperture diameter on plasma transport through the annular anode of a vacuum arc plasma deposition system

751

Influence of the application of sewage sludge on the degradation of pesticides in the soil

752

Influence of the application of sewage sludges on soil microbial activity

753

Influence of the application of sugarcane bagasse on lindane (γ-HCH) mobility through soil column: Implication for biotreatment

754

Influence of the application time on the penetration of different dental adhesives and a fissure sealant into artificial subsurface lesions in bovine enamel

755

Influence of the applied electric field and gas on the energy spectra of electrons emitted from carbon fibre microemitters

756

Influence of the applied electric field and gas on the energy spectra of electrons emitted from carbon fibre microemitters

757

Influence of the applied voltage on the Rapid Chloride Migration (RCM) test

758

Influence of the Ar8+ and O6+ ion implantation on the recombination parameters of p and n type implanted Si samples investigated by means of the photothermal infrared radiometry

759

Influence of the Aral Sea negative water balance on its seasonal circulation patterns: use of a 3D hydrodynamic model

760

Influence of the aromatic ring substituents on phase equilibria of vanillins in binary systems with CO2

761

Influence of the artificial reef size configuration on transient ichthyofauna – Southeastern Brazil

762

Influence of the artificial weathering on thermal stability of paper-based materials

763

Influence of the As/Ga flux ratio on diffusion of Be in MBE GaAs layers

764

Influence of the ash fraction on the mass balance during the summative analysis of high-ash content lignocellulosics

765

Influence of the assembly process on the shear strength of shaft–hub hybrid joints

766

Influence of the asymmetrical cratering rate on the lunar cratering chronology

767

Influence of the Atchafalaya River on recent evolution of the chenier-plain inner continental shelf, northern Gulf of Mexico

768

Influence of the Atlantic Multidecadal Oscillation on tupelo honey production from AD 1800 to 2010

769

Influence of the atmosphere in the chemical activation of wood by phosphoric acid

770

Influence Of The Atmosphere On Earth Rotation: What New Can Be Learned From The Recent Atmospheric Angular Momentum Estimates?

771

Influence of the atmosphere used in the carbonization of phosphoric acid impregnated peach stones

772

Influence of the atmospheric pressure on the mass transfer rate of desiccant wheels

773

Influence of the atom–atom interaction anisotropy on the structure and stability of ArnCl2 clusters

774

Influence of the atomic force microscope tip on the multifractal analysis of rough surfaces

775

Influence of the atomic force microscope tip on the multifractal analysis of rough surfaces

776

Influence of the atomization gas on the microstructure and magnetic properties of spray-formed Fe–3%Si–3.5%Al alloys

777

Influence of the attachment of acidophilic bacteria during the oxidation of mineral sulfides

778

Influence of the attack angle on the scratch testing of an aluminium alloy by cones: Experimental and numerical studies

779

Influence of the Au interlayer on the contact resistance and morphology of CdTe films deposited on molybdenum substrate

780

Influence of the average roughness Rms on the precision of the Youngʹs modulus and hardness determination using nanoindentation technique with a Berkovich indenter

781

Influence of the axle load, tyre size and configuration on the compaction of a freshly tilled clayey soil

782

Influence of the Aznalcóllar mining spill on the vertical distribution of heavy metals in sediments from the Guadalquivir estuary (SW Spain)

783

Influence of the B and P content on the thermal stability and crystallization of cast iron based bulk amorphous alloys

784

Influence of the background approximation methods on the analysis of γ-ray spectra

785

Influence of the baffle clearance design on hydrodynamics of a two riser rectangular airlift reactor with inverse internal loop and expanded gas–liquid separator

786

Influence of the band shapes in the Anderson impurity model

787

Influence of the barrier thickness on the photoluminescence properties of amorphous Si/SiO multilayers

788

Influence of the Basement Strike-Slip Fault on the 2005 and 2014 Earthquakes, Qeshm Island, Iran

789

Influence of the basic membrane properties of the disulfonated poly(arylene ether sulfone) copolymer membranes on the vanadium redox flow battery performance

790

Influence of the basicity of internal bases in diiron model complexes on hydrides formation and their transformation into protonated diiron hexacarbonyl form

791

Influence of the bath composition and the pH on the induced cobalt–molybdenum electrodeposition

792

Influence of the BDNF Val66Met polymorphism on coping response to stress in patients with advanced gastric cancer

793

Influence of the Beam Size Radiation on the Depth Dose by Using 60Co

794

Influence of the beam-size effect on particle losses at B-factories PEP-II and KEKB

795

Influence of the beam-size effect on particle losses at B-factories PEP-II and KEKB

796

Influence of the bed mass on its fluidization characteristics

797

Influence of the bias voltage on the formation of beryllium films by a thermionic vacuum arc method

798

Influence of the bifunctional chelate on the biological behavior of 99mtc-labeled chemotactic peptide conjugates

799

Influence of the binder on the mechanical strength of compacts prepared by modified wet compression method

800

Influence of the biomass content in sediment on the sediment nutrient flux for a pulsed organic load

801

Influence of the biquadratic interlayer coupling in the specific heat of Fibonacci magnetic multilayers

802

Influence of the blanket shield modules geometry on the operation of the ITER ICRF antenna

803

Influence of the blend composition on the properties and separation performance of novel solvent resistant polyphenylsulfone/polyimide nanofiltration membranes

804

Influence of the block geometry on the voltammetric response of partially blocked electrodes: Application to interfacial liquid–liquid kinetics of aqueous vitamin B12S with random arrays of femtolitre microdroplets of dibromocyclohexane

805

Influence of the body mass index on postoperative outcome and long-term survival after pancreatic resections in patients with underlying malignancy

806

Influence of the bolt torque on PEFC performance with different gasket materials

807

Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate

808

Influence of the bonding substrate in dental composite polymerization stress testing

809

Influence of the Borate on the Performance of ASA-Al2O3 supported Ni-Mo Hydrocracking Catalyst

810

Influence of the boundary of a medium on the coherent backscattering of light

811

Influence of the Bovine Acyl-CoA: Diacylglycerol Acyltransferase1 (DGAT1) K232A on Milk Production and Somatic Cell Score Holstein Cows

812

Influence of the break location in the loss of coolant accident analyses for the ITER divertor cooling loop

813

Influence of the breed of bull (Bos taurus indicus vs. Bos taurus taurus) and the breed of cow (Bos taurus indicus, Bos taurus taurus and crossbred) on the resistance of bovine embryos to heat

814

Influence of the bridge on the vibrations of the top plate of a classical guitar

815

Influence of the bridging ligand on the substitution chemistry of neutral and cationic triruthenium carbonyl cluster complexes derived from 1,1-dimethylhydrazine

816

Influence of the broken symmetry of defect state distribution at the a-Si:H/c-Si interface on the performance of hetero-junction solar cells

817

Influence of the Brönsted and Lewis acid sites on the catalytic activity and selectivity of Fe/MCM-41 system Original Research Article

818

Influence of the B-site ordering on the magnetic properties of the new La3Co2MO9 double perovskites with M = Nb or Ta

819

Influence of the built-in electric field on luminescent properties in self-formed single InxGa1−xN/GaN quantum dots

820

Influence of the built-in electric field on luminescent properties in self-formed single-GaN/AlxGa1−xN quantum dots

821

Influence of the bulking agent on the degradation of olive-mill wastewater sludge during composting

822

Influence of the C content on the mechanical and tribological properties of the TiCN coatings deposited by LAFAD technique

823

Influence of the C/S and C/A ratios of hydration products on the chloride ion binding capacity of lime-SF and lime-MK mixtures

824

Influence of the C2H2 flow rate on gradient TiCN films deposited by multi-arc ion plating

825

Influence of the Ca/Mg ratio on Cu resistance in three Silene armeria ecotypes adapted to calcareous soil or to different, Ni- or Cu-enriched, serpentine sites

826

Influence of the Ca/P ratio on the morphology of fluorapatite crystals in SiO2–Al2O3–CaO–P2O5–K2O–F− glass-ceramics

827

Influence of the calcination on the activity and stability of the Cu/ZnO/Al2O3 catalyst in liquid phase methanol synthesis

828

Influence of the calcination temperature on morphological and mechanical properties of highly porous hydroxyapatite scaffolds

829

Influence of the calcination temperature on the acidic and catalytic properties of sulphated zirconia Original Research Article

830

Influence of the calcination temperature on the nano-structural properties, surface basicity, and catalytic behavior of alumina-supported lanthana samples

831

Influence of the calcination temperature on the structure and reducibility of nanoceria obtained from crystalline Ce(OH)CO3 precursor

832

Influence of the calcination treatment on the catalytic properties of hierarchical ZSM-5

833

Influence of the Calcium Hydroxide Intracanal Dressing on Dentinal Tubule Penetration of Two Root Canal Sealers

834

Influence of the calcium phosphate content of the target on the phase composition and deposition rate of sputtered films

835

Influence of the calcium sulphate source on the hydration mechanism of Portland cement–calcium sulphoaluminate clinker–calcium sulphate binders

836

INFLUENCE OF THE CALVING SEASON ON THE MILK YIELD GIVEN BY A FRIESIAN POPULATION, IMPORTED FROM THE NETHERL

837

Influence of the CaO/MgO ratio on the structure of phase-separated glasses: a solid state 29Si and 31P MAS NMR study

838

Influence of the carbohydrate composition on the molecular weight distribution of kraft pulps

839

Influence of the carbohydrate source on β-glucan production and enzyme activities involved in sugar metabolism in Pediococcus parvulus 2.6

840

Influence of the carbon content on dislocation relaxation in martensitic steels

841

Influence of the carbon dioxide concentration on the resistance to carbonation of concrete

842

Influence of the carbon fiber surface microstructure on the surface chemistry generated by a thermo-chemical surface treatment

843

Influence of the carbon material on the synthesis of silicon carbide Original Research Article

844

Influence of the carbon source on production of cellulases, hemicellulases and pectinases by Trichoderma reesei Rut C-30

845

Influence of the carbon source on the anaerobic biomass adhesion on polyurethane foam matrices

846

Influence of the carbon surface on cathode deposits in non-aqueous Li–O2 batteries Original Research Article

847

Influence of the carbon texture of platinum/carbon aerogel electrocatalysts on their behavior in a proton exchange membrane fuel cell cathode

848

Influence of the carbonization heating rate on the physical properties of activated carbons from a sub-bituminous coal Original Research Article

849

Influence of the carrier composition on thermal field-flow fractionation for the characterisation of sub-micron polystyrene latex particles

850

Influence of the carrier gas on the formation of iron nano-particles from the gas phase: A molecular dynamics simulation study

851

Influence of the carrier on the catalytic performance of impregnated phosphoric acid in the hydration of ethylene Original Research Article

852

Influence of the Casserius Tables on fetal anatomy illustration and how we envision the unborn

853

Influence of the casting and mould temperatures on the (micro)structure and compression behaviour of investment-cast open-pore aluminium foams Original Research Article

854

Influence of the casting processing route on the corrosion behavior of dental alloys

855

Influence of the catalyst loading on the activity and the CO selectivity of supported Ru catalysts in the selective methanation of CO in CO2 containing feed gases

856

Influence of the catalytic conditions on the selectivity of the Pd-catalyzed Heck arylation of acrolein derivatives

857

Influence of the catalytic introduction procedure on the nano-SnO2 gas sensor performances: Where and how stay the catalytic atoms?

858

Influence of the catalytic support on the industrial Fischer–Tropsch synthetic diesel production

859

Influence of the catechol-O-methyltransferase Val108/158Met polymorphism on the plasma concentration of catecholamine metabolites and on clinical features in type I bipolar disorder—A preliminary report

860

Influence of the cation nature of high sulfur content oxysulfide thin films MOySz (M¼W, Ti) studied by XPS

861

Influence of the cation size on the formation of alluaudite-type manganese arsenates: synthesis and characterization of Tl2Mn3(As2O7)2·2H2O, CsMn3(AsO4) (HAsO4)2·3H2O, and XMn3(AsO4)(HAsO4)2 (X=Na, K)

862

Influence of the cavitation on the stress–strain fields of compressible Blatz–Ko materials at finite deformation

863

Influence of the CD14 C260T Promoter Polymorphism on C-Reactive Protein Levels in Patients With Coronary Artery Disease

864

Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions

865

Influence of the central atom on the electronic properties of Lindqvist polyoxometalates

866

Influence of the chain length of chitosan on complement activation

867

Influence of the chain-length distribution of inulin on the rheology and microstructure of prebiotic dairy desserts Original Research Article

868

Influence of the character of NOM on the ozonation of MIB and geosmin

869

Influence of the characteristic of recrystallization grain boundary on the formation of creep cracks in a directionally solidified Ni-base superalloy

870

Influence of the characteristics of natural organic matter on the fouling of microfiltration membranes

871

Influence of the characteristics of soluble algal organic matter released from Microcystis aeruginosa on the fouling of a ceramic microfiltration membrane

872

Influence of the characteristics of the STM-tip on the electroluminescence spectra

873

Influence of the charge concentration on the density of states in a two-dimensional superconducting system

874

Influence of the charge of low molecular weight proteins on their efficacy of filtration and/or adsorption on dialysis membranes with different intrinsic properties

875

Influence of the charge regulator strategy on state of charge and lifetime of VRLA battery in household photovoltaic systems

876

Influence of the chemical activation of carbon nanofibers on their use as catalyst support Original Research Article

877

Influence of the chemical and mineralogical composition on the reactivity of volcanic ashes during alkali activation

878

Influence of the chemical composition and process parameters on the mechanical properties of an extruded aluminium alloy for highly loaded structural parts

879

Influence of the chemical composition of flux on the microstructure and tensile properties of submerged-arc welds

880

Influence of the chemical composition on the machinability of brasses

881

Influence of the chemical composition on transformation behaviour of low carbon microalloyed steels

882

Influence of the chemical environment changes on the line shape and intensity ratio values for La, Ce and Pr L lines spectra

883

Influence of the chemical form on the plasma clearance of ruthenium in humans

884

Influence of the chemical structure of polycarbonates on the contribution of crosslinking and chain scissions to the photothermal ageing

885

Influence of the chemical structure of PUR prepolymers on thermal stability

886

Influence of the chemical structure on mobility of PCB congeners in female and male sardine (Sardina pilchardus) from Portuguese coast Original Research Article

887

Influence of the chemical structure on the thermal degradation of the glucosinolates in broccoli sprouts

888

Influence of the chemical synthesis on the physicochemical properties of N-TiO2 nanoparticles

889

Influence of the chemisorption state on the charge distribution of low energy Si scattered from I adatoms

890

Influence of the chloride-based anti-freeze filler on the properties of asphalt mixtures

891

Influence of the clay coating properties on the dilation behavior of sandstones

892

Influence of the clay content and the polysulfone molar mass on nanocomposite membrane properties

893

Influence of the clay type on the pore structure of structural ceramics

894

Influence of the cleaning temperature on the permeability of ceramic membranes Original Research Article

895

Influence of the clearance between initiating unit and main high explosive charge on jet perforator efficiency

896

Influence of the clinker SO3 on the cement characteristics

897

Influence of the CMAS on the aging of titanium alloy β21s

898

Influence of the Co/Al ratio and the temperature of thermal treatment on cobalt speciation and catalytic properties of Co-ZSM-5 prepared by solid-state ion exchange Original Research Article

899

Influence of the CO2 absorbent monoethanolamine on growth and carbon fixation by the green alga Scenedesmus sp.

900

Influence of the coating material on the loosing of dental implant abutment screw joints

901

Influence of the coating preparation method and of nanosilica addition on the bonding character of Si3N4 layer on a silica crucible

902

Influence of the coating structure of a-C:H:W coatings on their wear-performance: A theoretical approach and its practical confirmation

903

Influence of the cobalt salt precursors on the cobalt speciation and catalytic properties of H-ZSM-5 modified with cobalt by solid-state ion exchange reaction Original Research Article

904

Influence of the coexisting gases on the electrochemical reaction rates between 873 and 1173 K in a CH4–H2O/Pt/YSZ system

905

Influence of the co-feeding of CO, H2, CO2 or H2O in the partial oxidation of methane over Ni and Rh supported catalysts

906

Influence of the co-firing on the leaching of trace pollutants from coal fly ash

907

Influence of the cognitive impairment level on the performance of the Timed “Up & Go” Test (TUG) in elderly institutionalized people

908

Influence of the cold-drawing process on fatigue crack growth of a V-notched round bar

909

Influence of the collection and oxygenation method on quantitative bacterial composition in bronchoalveolar lavage fluid samples from healthy dogs

910

Influence of the colloid type on the transfer of 60Co and 85Sr in silica sand column under varying physicochemical conditions

911

Influence of the colloidal crystal-like arrangement of polymethylmethacrylate bonded aerosil particles on the polymerization shrinkage of composite resins

912

Influence of the column hold-up time measurement accuracy on the prediction of chromatographic band profiles

913

Influence of the column radial heterogeneity on the determination of single-component isotherms by the elution by characteristic point method

914

Influence of the combination of Roman cement and lime as the binder phase in render mortars for restoration

915

Influence of the common varistor dopants (CoO, Cr2O3 and Nb2O5) on the structural properties of SnO2 ceramics

916

Influence of the compaction pressure on the electrochemical impedance spectroscopy response of the AB5-type electrodes

917

Influence of the compaction process on the air void homogeneity of asphalt mixtures samples

918

Influence of the compensating anions of Ni/Al and Ni/Mg/Al layered double hydroxides on their activation under oxidising and reducing atmospheres Original Research Article

919

Influence of the compensation level on the performance of p-type crystalline silicon solar cells: Theoretical calculations and experimental study

920

Influence of the completion of oxidation on the long-term response of RGTO SnO2 gas sensors

921

Influence of the complex formation on the morphology of lead powder particles produced by the electrodeposition processes

922

Influence of the complexing agent (Na2-EDTA) on the structural, morphological, electrical and optical properties of chemically deposited FeSe thin films

923

Influence of the composite surface structure on the peel strength of metallized carbon fibre-reinforced epoxy

924

Influence of the composition and preparation method on the morphology and swelling behavior of alginate–chitosan hydrogels

925

Influence of the composition and preparation method on the morphology and swelling behavior of alginate–chitosan hydrogels

926

Influence of the composition of aqueous-alcohol solvents on the thermodynamic characteristics of l-phenylalanine dissolution at 298.15 K

927

Influence of the composition of aqueous-alcohol solvents on thermodynamic characteristics of dl-α-alanyl-dl-norleucine dissolution at 298.15 K

928

INFLUENCE OF THE COMPOSITION OF CARRIERS BASED ON ZrO2 AND Al2O3 ON THE PROPERTIES OF COBALTCONTAINING CATALYSTS ON THE SELECTIVE REDUCTION OF NO WITH METHANE

929

Influence of the composition of carriers based on ZrO2 and Al2O3 on the properties of cobalt-containing catalysts on the selective reduction of NO with methane

930

Influence of the composition of cement kiln dust on its interaction with fly ash and slag

931

Influence of the composition of Co-containing perovskites on their catalytic properties in the conversion of methane into higher hydrocarbons in non-stationary conditions

932

INFLUENCE OF THE COMPOSITION OF COMPOSITES BASED ON Y- AND Sc-STABILIZED ZIRCONIUM DIOXIDE ON CATALYTIC PROPERTIES IN THE OXIDATIVE CONVERSION OF METHANE

933

Influence of the composition of composites based on Y-and Sc-stabilized zirconium dioxide on catalytic properties in the oxidative conversion of methane

934

Influence of the composition of Cu–Co–Fe alloys on their dissolution in ammoniacal solutions

935

Influence of the composition of Fe2O3/Al2O3 catalysts on the rate of production and quality of carbon nanotubes

936

Influence of the composition of lithium-based alloys, non-aqueous electrolytes and cycling conditions on the anode properties

937

INFLUENCE OF THE COMPOSITION OF PEROVSKITES BASED ON SrMnO3 ON THEIR CATALYTIC PROPERTIES IN THE OXIDATIVE COUPLING OF METHANE

938

Influence of the composition of polymer inclusion membranes on their homogeneity and flexibility Original Research Article

939

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

940

Influence of the composition of the reaction mixture and the synthesis conditions on the formation of mesomorphous substances in the presence of glucose oxidase

941

Influence of the composition of titanium oxynitride layers on the fretting behavior of functionalized titanium substrates: PVD films versus surface laser treatments

942

Influence of the composition on the crystallinity and adhesion properties of thermoplastic polyurethane elastomers

943

Influence of the composition on the crystallinity and adhesion properties of thermoplastic polyurethane elastomers

944

Influence of the compound-nucleus lifetime on the observed width of hot giant dipole resonances

945

Influence of the Compounds Used in Immunochromatographic Test-system on its Analytical Characteristics: Multi-factor Optimization of the System for Aflatoxin B1

946

Influence of the concentration and nature of carbon nanotubes on the mechanical properties of AA5083 aluminium alloy matrix composites

947

Influence of the concentration boundary layers on membrane potential in a single-membrane system Original Research Article

948

Influence of the concentration of ethanol and the interaction of compounds in the pyrolysis of acetylene and ethanol mixtures

949

Influence of the concentration of the protease from Streptomyces griseus relative to ruminal protein degradability

950

Influence of the concentration of ZrCl4 on texture, morphology and growth rate of CVD grown α-Al2O3 coatings deposited by the AlCl3/ZrCl4/H2/CO2/H2S process

951

Influence of the concentration on the conductimetric properties of a fulvic acid system

952

Influence of the concentrations of hyaluronic acid on the properties and biocompatibility of Cs–Gel–HA membranes

953

Influence of the concrete DIF model on the numerical predictions of RC wall responses to blast loadings

954

Influence of the conditions of deposition on the chemistry and the reflectance variations of the Brent coals

955

INFLUENCE OF THE CONDITIONS OF MANUFACTURE OF NANOMERIC ZIRCONIUM DIOXIDE, STABILIZED WITH YTTRIUM OXIDE, ON ITS CATALYTIC PROPERTIES IN THE OXIDATION OF CO

956

Influence of the conditions of mechanical activation of the mixture of ilmenite and carbon on the pigment preparation

957

Influence of the conditions of thermal treatments and of storage on the size of the gold particles in Au/TiO2 samples

958

Influence of the connection section on the aerodynamic performance of the tandem waverider in a wide-speed range

959

Influence of the conserved active site residues of histidyl tRNA synthetase on the mechanism of aminoacylation reaction Original Research Article

960

Influence of the constant electric field on the mutual rectification of the electromagnetic waves in graphene superlattice

961

Influence of the constant life diagram formulation on the fatigue life prediction of composite materials

962

INFLUENCE OF THE CONSUMPTION OF FRUITS AND VEGETABLES ON THE NUTRITIONAL STATUS OF A GROUP OF INSTITUTIONALIZED ELDERLY PERSONS IN THE MADRID REGION

963

Influence of the contacting scheme in simulations of radial silicon nanorod solar cells

964

Influence of the content in fats and proteins on the anaerobic biodegradability of dairy wastewaters

965

Influence of the content of ceramic phase on the precipitation hardening of Al alloy 7000/AlN nanocomposites

966

Influence of the controlled dual ectomycorrhizal and rhizobal symbiosis on the growth of Acacia mangium provenances, the indigenous symbiotic microflora and the structure of plant parasitic nematode communities

967

Influence of the convective cooling and the thermal resistance on the temperature of the pad/disc tribosystem

968

Influence of the conversion coating on the corrosion of galvanized reinforcing steel

969

Influence of the cooling circulation water on the efficiency of a thermonuclear plant

970

Influence of the cooling rate on low-temperature Raman and infrared-reflection spectra of partially deuterated κ-(BEDT-TTF)2Cu(N(CN)2)Br

971

Influence of the cooling rate on the texture and the microstructure of Zircaloy-4 studied by means of a Jominy end-quench test

972

Influence of the cooling section on vapor-phase pyrolysis in laminar-flow reactors

973

Influence of the coordination on the catalytic properties of supported W catalysts

974

Influence of the copper electrode structure on adsorption of thiourea in neutral solution

975

Influence of the co-precipitation pH on the physico-chemical and catalytic properties of vanadium aluminum oxide catalyst Original Research Article

976

Influence of the co-precipitation temperature on phase evolution in yttrium-aluminium oxide materials

977

Influence of the Coronavirus Disease 2019 Pandemic on Patients with ST-Segment Elevation Myocardial Infarction in Taiwan

978

Influence of the correction for moisture/water content on the quality of the certification of cadmium, copper and lead mass fractions in rice

979

Influence of the coulomb blockade effect on heat transfer in a one-dimensional system of spinless electrons

980

Influence of the Coulomb interaction on the Fermi hole in an electron liquid

981

Influence of the Coulomb interaction on the spin-polarized current in the quantum dot system in the presence of the bias voltagepulse

982

Influence of the counter anion and solvent in the structure of copper derivatives with the 2,3-bis(2-pyridyl)pyrazine ligand

983

Influence of the counter anion and steric hindrance of pyrazolyl and imidazolyl flexible ligands on the structure of zinc-based coordination polymers

984

Influence of the counter ion on the properties of poly(o-toluidine) thin films and their Schottky diodes

985

Influence of the counter ion on the structure of two new copper(I) coordination polymers: Synthesis, structural characterization and thermal analysis

986

Influence of the counter-anion on the interaction of cations with the benzodithia-18-crown-6 butadienyl dye in monolayers

987

Influence of the counter-ion on the effective charge of polyacrylic acid in dilute condition

988

Influence of the counterion size on the rate of electrochemical relaxation in polypyrrole

989

Influence of the countermaterial on the dry sliding friction and wear behaviour of low temperature carburized AISI316L steel

990

Influence of the coupling between daylight and artificial lighting on thermal loads in office buildings

991

Influence of the coupling of two box decks

992

Influence of the Cr loading in Cr/MCM-41 and TiO2/Cr/MCM-41 molecular sieves for the photodegradation of Acid Orange 7 Original Research Article

993

Influence of the crack morphology on the fatigue crack growth rate: A continuously-kinked crack model based on fractals

994

Influence of the crack plane asymmetry over GII results in carbon epoxy ENF specimens

995

Influence of the crack-tip hydride concentration on the fracture toughness of Zircaloy-4

996

Influence of the crash pulse shape on the peak loading and the injury tolerance levels of the neck in in vitro low-speed side-collisions

997

Influence of the critical velocity on deformation of launcher components

998

Influence of the cross-section geometry of a cylindrical solid submerged in an acoustic medium on wave propagation

999

Influence of the crystal field effect on chemical transport in Earthʹs mantle: Cr3+ and Ga3+ diffusion in periclase

1000

Influence of the crystal orientation on the electrical properties of AlN thin films on LTCC substrates

بازگشت