ليست عنوان مقالات لاتين Influence of the fiber diameter and surface roughness of electrospun vascular grafts on blood activation Influence of the spacer length on the activity of enzymes immobilised on nylon/polyGMA membranes: Part 2: Non-isothermal conditions

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of the fiber diameter and surface roughness of electrospun vascular grafts on blood activation

2

Influence of the fibre–matrix interface on the behaviour of polypropylene reinforced by short glass fibres above glass transition temperature

3

Influence of the fibrinolytic system in the regulation of extracellular matrix metalloproteases

4

Influence of the filler content on the thermal expansion behavior of an epoxy matrix particulate composite

5

Influence of the film deposition rate and humidity on the properties of thin CsI photocathodes

6

Influence of the film deposition rate and humidity on the properties of thin CsI photocathodes

7

Influence of the film thickness on structural and optical properties of CdTe thin films electrodeposited on stainless steel substrates

8

Influence of the filtration modes on colloid adsorption on the membrane in submerged membrane bioreactor

9

Influence of the final “ageing” temperature on the regeneration behaviour and location of the coke obtained in the HZSM-5 and USY zeolites during the LDPE cracking Original Research Article

10

Influence of the fine structure of glass forming materials on the overlapping of the alpha and secondary relaxations

11

Influence of the fineness of sewage sludge ash on the mortar properties

12

Influence of the finite duration and efficiency of collisions on the orientational relaxation times of non-spherical molecules in the hindered rotation limit

13

Influence of the finite precision on the simulations of discrete dynamical systems

14

Influence of the first-order exchange coefficient on simulation of coupled surface–subsurface flow

15

Influence of the fish pond aquaculture effluent discharge on abiotic environmental factors of selected rivers in Northwest Poland

16

Influence of the fitted probability distribution type on the annual mean power generated by wind turbines: A case study at the Canary Islands

17

Influence of the flashing phenomenon on the boiling curve of refrigerant R134a in minichannels

18

Influence of the Flatness Ratio of an Automotive Torque Converter on Hydrodynamic Performance

19

Influence of the Flatness Ratio of an Automotive Torque Converter on Hydrodynamic Performance

20

Influence of the floor-based obstructions on contaminant removal efficiency and effectiveness

21

Influence of the flux of H2 and D2 molecules on kinetics of low-temperature (down to 5 K) adsorption on the W(1 1 0) surface

22

Influence of the formulation of an alumina powder on compaction

23

Influence of the formulation, cooking time and final internal temperature of beef hamburgers on the destruction of Listeria monocytogenes

24

INFLUENCE OF THE FRACTAL NATURE AND DIPERSITY OF DEPOSITED METAL CATALYSTS ON THE KINETICS OF THE HYDROGENATION OF ACETONE

25

Influence of the fragmentation process on the dynamics of Vulcanian eruptions: An experimental approach

26

Influence of the framework composition of commerical HFAU zeolites on their activity and selectivity in m-xylene transformation Original Research Article

27

Influence of the free isocyanate content in the adhesive properties of reactive trifunctional polyether urethane quasi-prepolymers

28

Influence of the free surface and the mean stress on the heat dissipation in steels under cyclic loading

29

Influence of the freezing condition on the baking performances of French frozen dough Original Research Article

30

Influence of the frequency of the external mechanical stimulus on bone healing: A computational study

31

Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by micro-plasma oxidation

32

Influence of the friction coefficient on the contact geometry during scratch onto amorphous polymers

33

Influence of the fringe field and the field interaction on the emission performance of a diode emitter array

34

Influence of the fringe field and the field interaction on the emission performance of a diode emitter array

35

Influence of the fringe field on moving of the charged particles in flat and cylindrical capacitors

36

Influence of the fringe field on moving of the charged particles in flat and cylindrical capacitors

37

Influence of the frozen storage on some characteristics of ripened Manchego-type cheese manufactured with a powdered vegetable coagulant and rennet

38

Influence of the FSW clamping force on the final distortion and residual stress field

39

Influence of the fuel cell technology on CO2 emissions reduction in Iran according to outlook 2030

40

Influence of the fuel structure on the flame synthesis of carbon nanomaterials Original Research Article

41

Influence of the fullerene derivatives and cage polyhedral oligomeric silsesqiuoxanes on 3-aminopropyltrimethoxysilane based hybrid nanocomposites chemical, morphological and electrical properties Original Research Article

42

Influence of the functional group on the synthesis of aminophosphines, diphosphinoamines and iminobiphosphines

43

Influence of the Ga addition on optical properties of Pr in Ge–Sb–Se glasses Original Research Article

44

Influence of the gap-target configuration on the measured energy loss of C-ions in Ar-gas and -plasma

45

Influence of the gap-target configuration on the measured energy loss of C-ions in Ar-gas and -plasma

46

Influence of the gas atmosphere on restructuring and sintering kinetics of nickel and platinum aerosol nanoparticle agglomerates

47

Influence of the gas composition on the electron transport coefficients in helium-based gas mixtures

48

Influence of the gas composition on the electron transport coefficients in helium-based gas mixtures

49

Influence of the gas diffusion cathode structure on the performance of an air-breathing proton exchange membrane fuel cell

50

Influence of the gas distributor on the local hydrodynamic behavior of an external loop airlift reactor

51

Influence of the gas environment on the transferred film of the brass (Cu64Zn36)/steel AISI 1045 couple

52

Influence of the gas particle flow characteristics of a low-NOx swirl burner on the formation of high temperature corrosion

53

Influence of the gas phase resistance on hydrogen flux through thin palladium–silver membranes

54

Influence of the gas pressure on single-wall carbon nanotube formation Original Research Article

55

Influence of the gas temperature on the separation efficiency of aerocyclones

56

Influence of the gate internal impedance on losses in a power MOS transistor switching at a high frequency in the ZVS mode

57

Influence of the gel on the morphology of a thermoset polymerized into a thermoplastic matrix, under shear

58

Influence of the gelation and calcination temperatures on physical parameters and photocatalytic activity of mesoporous titania powders synthesized by the nonhydrolytic sol–gel process

59

Influence of the Generation of Mesopores on the Hydroisomerization Activity and Selectivity of n-Hexane over Pt/Mordenite

60

Influence of the genesis on the structural and hyperfine properties of Cr-substituted hematites

61

INFLUENCE OF THE GENOTYPE ON THE ANTHOCYANIN COMPOSITION, ANTIOXIDANT CAPACITY AND COLOR OF CHILEAN POMEGRANATE (Punica granatum L.) JUICES

62

Influence of the geologic and geomorphologic characteristics and of crab burrows on the interrelation between surface water and groundwater in an estuarine coastal wetland

63

Influence of the geological history, particle size and carbonate content on the surface properties of talc as determined by inverse gas chromatography at infinite dilution

64

Influence of the geomagnetic field on the IACT detection technique for possible sites of CTA observatories

65

Influence of the geometric and material characteristics on the strength of glued joints made in chestnut timber

66

Influence of the geometric structure on the V L3 near edge X-ray absorption fine structure from vanadium phosphorus oxide catalysts

67

Influence of the geometrical properties of the carbon nanotubes on the interfacial behavior of epoxy/CNT composites: A molecular modelling approach

68

Influence of the geometry and the abutments movement on the collapse of stone arch bridges

69

Influence of the geometry of coaxial adhesive joints on the transmitted load under tensile and compression loads

70

Influence of the geometry of nanostructured hydroxyapatite and alginate composites in the initial phase of bone repair

71

Influence of the geometry of partially-spanning joints on mechanical properties of rock in uniaxial compression

72

Influence of the geometry of the arrangement inductor – crucible to the velocity of the transport of mass in the liquid metallic phase mixed inductive

73

Influence of the Ge–Sb sublattice atomic composition on the topological electronic properties of Ge2Sb2Te5

74

Influence of the glass packing on the contamination of pharmaceutical products by aluminium. Part II: Amino acids for parenteral nutrition

75

Influence of the glass packing on the contamination of pharmaceutical products by aluminium. Part III: Interaction container-chemicals during the heating for sterilisation

76

Influence of the glass packing on the contamination of pharmaceutical products by aluminum. Part I: Salts, glucose, heparin and albumin

77

Influence of the Global Utilization of Streptokinase and Tissue Plasminogen Activator for Occluded Coronary Arteries (GUSTO-1) Trial on the Use of Thrombolytics in Germany

78

Influence of the Glu298Asp polymorphism of NOS3 on age at onset and homocysteine levels in AD patients

79

Influence of the Glycemic Index of Pre-exercise Meals in Sports Performance: A Systematic Review

80

Influence of the glycerol concentration on some physical properties of feather keratin films

81

Influence of the governing dimensionless parameters on heat transfer during single drop impingement onto a hot wall

82

Influence of the Graded Index Cholesteric Liquid Crystal Reflectors on the Luminescent Solar Concentrator Efficiency

83

Influence of the grafted chain length on responsive behaviors of the grafted poly(DEA-co-DMAEMA) hydrogel

84

Influence of the grain boundary barrier height on the electrical properties of Gallium doped ZnO thin films

85

Influence of the grain size on deleterious phase precipitation in superduplex stainless steel UNS S32750

86

Influence of the grain size on the effective absorption cross-section of thermal neutrons in a medium containing highly absorbing centres

87

Influence of the graphene substrate on morphology of the gold thin film. Spectroscopic ellipsometry study

88

Influence of the grating profiles on the image quality in grating-based x-ray imaging

89

Influence of the grating profiles on the image quality in grating-based x-ray imaging

90

Influence of the green density on the dewaxing behaviour of uniaxially pressed powder compacts

91

Influence of the grinding level and extrusion on the nutritional value of lupin seed (Lupinus albus) for cattle in the context of the Dutch protein evaluation system

92

Influence of the Grinding Wheel in the Ductile Grinding of Brittle Materials: Development and Verification of Kinematic Based Model

93

Influence of the Grinding Wheel in the Ductile Grinding of Brittle Materials: Development and Verification of Kinematic Based Model

94

Influence of the gritting material applied during the winter services on the asphalt surface performance

95

Influence of the ground-state potential on the product rotational/translational correlation in the photon-stimulated desorption of NO

96

Influence of the growth at high osmolality on the lipid composition, water permeability and osmotic response of Lactobacillus bulgaricus

97

Influence of the growth conditions of AlN and GaN films by reactive laser ablation

98

Influence of the growth conditions of epitaxial graphene on the film topography and the electron transport properties

99

Influence of the growth conditions on the defect density of single-walled carbon nanotubes Original Research Article

100

Influence of the growth mechanism of snow particles on their chemical composition

101

Influence of the growth parameters of p-CdTe thin films on the performance of Au–Cu/p-CdTe/n-CdO type solar cells

102

Influence of the growth parameters on self-assembled Ge islands on Si(100)

103

Influence of the growth parameters on the dielectric loss at microwave frequency of freestanding diamond thick films

104

Influence of the growth rate on the nanocrystallinity of II–VI films in chemical vapor deposition

105

Influence of the growth temperature on the first and second-order Raman band ratios and widths of carbon nanotubes and fibers Original Research Article

106

Influence of the growth-surface on the incorporation of phosphorus in SiC

107

Influence of the guest molecule on the rotational potential for NH3 groups in Hofmann clathrates Original Research Article

108

Influence of the H/F replacement on the homoaromaticity of homotropylium ion: a GIAO/DFT theoretical study

109

Influence of the habitat change for birds on community structure

110

INFLUENCE OF THE HARDENER PROPORTION ON MECHANICAL PROPERTIES OF ADHESIVE BONDS USED IN AGRICULTURE

111

Influence of the heat exchangers’ construction material on catalytic incineration

112

Influence of the heat storage size on the plant performance in a Smart User case study

113

Influence of the heat treatment on mechanical properties and oxidation resistance of SiC–Si3N4 composites

114

Influence of the heat treatment on the crystallization mechanisms of Al85Y5Ni8Co2 metallic glass

115

Influence of the heat treatment on the degradation of the minor Fusarium mycotoxin beauvericin

116

Influence of the heat treatment on the precipitation of the intermetallic phases in commercial AlMn1FeSi alloy

117

Influence of the Heating Method on Greenhouse Microclimate and Energy Consumption

118

Influence of the heating ramp on the heteroepitaxial growth of SiC on Si

119

Influence of the heating ramp on the heteroepitaxial growth of SiC on Si

120

Influence of the heating rate on the recrystallization behavior of molybdenum

121

Influence of the heating temperature on the properties of nickel doped TiO2 films prepared by sol–gel method

122

Influence of the heavy fuel spill from the Prestige tanker wreckage in the overlying seawater column levels of copper, nickel and vanadium (NE Atlantic ocean)

123

Influence of the hepatobiliary contrast agent mangafodipir trisodium (Mn-DPDP) on the imaging properties of abdominal organs

124

Influence of the heterogeneity of grape phenolic maturity on wine composition and quality

125

Influence of the heterogeneous structure on the electrochemical properties of anion exchange membranes

126

Influence of the hexenuronic acid content on refining and ageing in eucalyptus TCF pulp

127

Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr

128

INFLUENCE OF THE HIGHER ORDER DERIVATIVES ON THE PLANET PERIHELION PRECESSION IN THE EINSTEIN FIELD EQUATIONS FOR VACUUM CONDITION

129

Influence of the history of a melt on the electrical resistivity of cadmium–antimony liquid alloys

130

Influence of the HLA-DQB1*0201 allele on the immune response in a Schistosoma mansoni infection

131

Influence of the HLB parameter of nonionic surfactants on normal and reversed-phase thin layer chromatography

132

Influence of the HLB parameter of surfactants on the dispersion properties of brine in residue

133

Influence of the HLB value of polycarboxylate superplasticizers on the flow behavior of mortar and concrete

134

Influence of the holding temperature of the first heating step in a two-heating step carbonisation process on the properties of chars and activated carbons from almond shells

135

Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics

136

Influence of the hollow-fibre membrane on the stability of β-galactosidase and on lactose hydrolysis: Kinetic models including adsorption of the enzyme onto the membrane

137

Influence of the holm oak soda pulping conditions on the properties of the resulting paper sheets

138

Influence of the homogenization conditions and lipid self-association on properties of sodium caseinate based films containing oleic and stearic acids

139

Influence of the host matrix of the enzyme in the performance of amperometric biosensors

140

Influence of the host oxide of sulfated-titania catalysts on partial oxidation methanol reaction Original Research Article

141

Influence of the hot filament on the electrical breakdown characteristics in the presence of Ar/N2

142

Influence of the hot-fill water-spray-cooling process after continuous pasteurization on the number of decimal reductions and on Alicyclobacillus acidoterrestris CRA 7152 growth in orange juice stored at 35 °C

143

Influence of the HPA axis on the inflammatory response in cutaneous wounds with the use of 670-nm laser photobiomodulation

144

Influence of the humidity conditions on the reflectivity spectrum of a porous silicon microcavity

145

INFLUENCE OF THE HUMIFICATION PROCESS ON THE PROPERTIES OF PEAT HUMIC ACIDS

146

Influence of the hydrocarbon chain length in the phase transition from solid to liquid-crystal in n-alkylammonium chlorides

147

Influence of the hydrodynamics on the biofilm formation by mass transport analysis

148

Influence of the hydrogen content on hydrogen diffusion in the Zr69.5Cu12Ni11Al7.5 metallic glass

149

Influence of the hydrophilic moiety of anionic and nonionic surfactants on their aerobic biodegradation in seawater Original Research Article

150

Influence of the hydrophobic force model on the capture of particles by bubbles: A computational study using Discrete Element Method

151

Influence of the hydrophobic groups and the nature of counterions on ion-binding in aliphatic ionene solutions

152

Influence of the hydrophobic interface and transition metal ions on the conformation of amyloidogenic model peptides Original Research Article

153

Influence of the hydrophobic material content in the gas diffusion electrodes on the performance of a PEM fuel cell

154

Influence of the hydrophobicity and surface roughness of mangoes and tomatoes on the adhesion of Salmonella enterica serovar Typhimurium and evaluation of cleaning procedures using surfactin

155

Influence of the hydroquinone with different pendant groups on physical and electrochemical behaviors of directly polymerized sulfonated poly(ether ether sulfone) copolymers for proton exchange membranes

156

Influence of the hydrostatic pulpal pressure on droplets formation in current etch-and-rinse and self-etch adhesives: A video rate/TSM microscopy and fluid filtration study

157

Influence of the hydrothermal temperature and pH on the crystallinity of a sputtered hydroxyapatite film

158

Influence of the hydrothermal treatment on the chromatographic properties of monolithic silica capillaries for nano-liquid chromatography or capillary electrochromatography

159

Influence of the hydroxylation of γ-Al2O3 surfaces on the stability and growth of Cu for Cu/γ-Al2O3 catalyst: A DFT study

160

Influence of the hypermodified Y base on the A·U pairing in the codon–anticodon interaction

161

INFLUENCE OF THE HYSTERESIS OF A COMPLIANT SUPPORT ON THE SPHERICAL MOTION OF A BODY CARRYING A FLYWHEEL

162

INFLUENCE OF THE HYSTERESIS OF A COMPLIANT SUPPORT ON THE SPHERICAL MOTION OF A BODY CARRYING A FLYWHEEL

163

Influence of the immobilisation process on the activity of β-galactosidase bound to nylon membranes grafted with glycidyl methacrylate: Part 2. Non-isothermal behaviour

164

Influence of the immobilization chemistry on the properties of immobilized β-galactosidases

165

Influence of the immobilization process on the activity of β-galactosidase bound to Nylon membranes grafted with glycidyl methacrylate: Part 1. Isothermal behavior

166

Influence of the Imperfect Interface on Love-Type Mechanical Wave in a FGPM Layer

167

Influence of the impregnation order of molybdenum and cobalt in carbon-supported catalysts for hydrodeoxygenation reactions Original Research Article

168

Influence of the impregnation order on the synergy between Ag and V2O5/TiO2 catalysts in the total oxidation of Cl-aromatic VOC

169

Influence of the improbable in earth sciences

170

Influence of the in vivo addition of alpha-tocopheryl acetate with three lipid sources on the lipid oxidation and fatty acid composition of Beluga sturgeon, Huso huso, during frozen storage

171

Influence of the inaccuracy of thermal contact conductance coefficient on the weighted-mean temperature calculated for a forged blank

172

Influence of the InAs coverage on the phonon-assisted recombination in InAs/GaAs quantum dots

173

Influence of the Inclusion of Graded Levels of Cassava Leaf Meal in the Diet on Post Partum Weight and Pre-Weaning Growth of Guinea Pigs (Cavia Porcellus L.)

174

Influence of the inclusions distribution on the effective properties of heterogeneous media

175

Influence of the incomplete dissolution of fines in the fines dissolver on the optimal operation of industrial continuous DTB crystallizers

176

Influence of the incorporation of metals on the optical properties of MCM-41

177

Influence of the incubation temperature, atmosphere and dynamic conditions on biofilm formation by Salmonella spp. Original Research Article

178

Influence of the induced anisotropy in powder-based materials

179

Influence of the induced anisotropy in powder-based materials

180

Influence of the induced anisotropy in powder-based materials

181

Influence of the industrial process from caryopsis to cornmeal semolina on levels of fumonisins and their masked forms

182

Influence of the infiltration pressure on the structure and properties of replicated aluminium foams

183

Influence of the inherent metal species on the graphitization of methane-based carbon nanofibers Original Research Article

184

Influence of the Inherited Glucose-6- phosphate Dehydrogenase Deficiency on the Appearance of Neonatal Hyperbilirubinemia in Southern Croatia

185

Influence of the initial crystallinity on the high pressure–high temperature phase transition in boron nitride Original Research Article

186

Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: Experimental investigations

187

Influence of the initial HI on the multiphase Bunsen reaction in the sulfur–iodine thermochemical cycle

188

Influence of the initial hydrogen pressure on the hydriding kinetics of the Mg2−xAlxNi (x=0,0.1) alloys

189

Influence of the initial imperfection on the non-linear buckling response of FGM truncated conical shells

190

Influence of the initial imperfection on the non-linear buckling response of FGM truncated conical shells

191

Influence of the initial projection of the centre of gravity on posturo-kinetic coordination in humans. Application from a horizontal quadrupedal stance during voluntary limb raising

192

Influence of the initial step density on the growth mechanisms of the Fe/Cu(1 0 0) interface

193

Influence of the initial step density on the growth mechanisms of the Fe/Cu(1 0 0) interface

194

Influence of the initial volume fill ratio of the granulator on melt agglomeration behavior in a high-shear mixer

195

Influence of the initiator system, cerium–polysaccharide, on the surface properties of poly(isobutylcyanoacrylate) nanoparticles

196

Influence of the injection technique and the column system on gas chromatographic determination of polybrominated diphenyl ethers

197

Influence of the inlet gas velocity components on the survival of the vertex of gas in the plasma torch

198

Influence of the inner droplet fraction on the release rate profiles from multiple W/O/W emulsions

199

Influence of the inoculation route in BALB/c mice infected by Leishmania infantum

200

Influence of the inorganic phase concentration and geometry on the viscoelastic properties of latex coatings through the glass-transition

201

Influence of the input layer signals of ANNs on wind power estimation for a target site: A case study

202

Influence of the inputted refractive index in the forward scattering laser particle analyzer

203

Influence of the insecticide carbofuran on the production and oxidation of methane in a flooded rice soil

204

Influence of the insecticides profenofos and diazinon on the microbial activities of Azospirillum brasilense

205

Influence of the intensity and duration of cyclic loading on the tribotechnical characteristics of steel

206

Influence of the interaction between binder and powders on melt agglomeration behavior in a high-shear mixer

207

Influence of the interaction between dislocations and mobile point-defects on the damping spectrum of aluminium

208

Influence of the interaction between light intensity and CO2 concentration on productivity and quality of spinach (Spinacia oleracea L.) grown in fully controlled environment Original Research Article

209

Influence of the interaction between metal particles on optical properties of Ag-Si3N4 composite films. I. Experiment

210

Influence of the interaction between metal particles on optical properties of Ag-Si3N4 composite films. II. Two-particle approximation

211

Influence of the Interaction between Two Neighboring Periodically Curved Fibers on the Stress Distribution in a Composite Material

212

Influence of the interaction of chromophores of bis-cyanine dyes on the photogeneration of charge carriers in poly-N-epoxypropylcarbazole films

213

Influence of the interaction of components on the pyrolysis behavior of biomass

214

Influence of the interaction of components on the pyrolysis behavior of biomass

215

Influence of the interaction range on the thermostatistics of a classical many-body system

216

Influence of the inter-chain hydrogen bonds on the thermoresponsive swelling behavior of UCST-like microgels

217

Influence of the interconfigurational interaction on the crystal field of Ln3+ ions

218

Influence of the interelectrode distance in electrophoretic cold cathode fabrication on the emission uniformity

219

Influence of the interface layer on the adhesion of pulsed laser deposited hydroxyapatite coatings on titanium alloy

220

Influence of the interface on the filtration performance of nanostructured zirconia ceramic

221

Influence of the interface ply orientation on the fatigue behaviour of bonded joints in composite materials

222

Influence of the interface structure on the barrier height of homogeneous Pb/n-Si(111) Schottky contacts

223

Influence of the interface structure on the thermo-mechanical properties of Cu–X (X = Cr or B)/carbon fiber composites

224

Influence of the interfacial composition on the adhesion between aggregates and bitumen: Investigations by EDX, XPS and peel tests

225

Influence of the intermediate material on the order of stress singularity in three-phase bonded structure

226

Influence of the intermixed interfacial layers on the thermal cycling behaviour of atmospheric plasma sprayed lanthanum zirconate based coatings

227

Influence of the Internal Disulfide Bridge on the Folding Pathway of the CL Antibody Domain

228

Influence of the internal excitation of FeCO+ on its reactivity with O2 observed in Fourier Transform-ICR cell

229

Influence of the internal gas flow distribution on the efficiency of a μ-preconcentrator

230

Influence of the internal structure and temperature in the reaction layer on the electric output in a solar thermal cell

231

Influence of the interphase zone on the nanoparticle debonding stress

232

Influence of the interstrip gap on the response and the efficiency of Double Sided Silicon Strip Detectors

233

Influence of the interstrip gap on the response and the efficiency of Double Sided Silicon Strip Detectors

234

Influence of the intramolecular potential of adsorbed hydrogen on frequency shift calculations

235

Influence of the intramolecular potential of adsorbed hydrogen on frequency shift calculations: Chem. Phys. Letters 232 (1995) 383

236

Influence of the intrinsic layer characteristics on a-Si:H p–i–n solar cell performance analysed by means of a computer simulation

237

Influence of the introduction of ceramic particles in Al–Cu alloys on GP zone formation

238

Influence of the introduction of ceramic particles in Al–Cu alloys on GP zone formation

239

Influence of the introduction of phenylene units into the polymer backbone on bandgap of conjugated poly(heteroarylene methines)

240

Influence of the invasive Asian clam Corbicula fluminea (Bivalvia: Corbiculidae) on estuarine epibenthic assemblages

241

Influence of the ion impact azimuth on glancing-incidence keV ion impact on the Si(100) surface

242

Influence of the ion type on the ion beam mixing of Cr/Al interfaces

243

Influence of the ionic liquid structure on thiophene solubility

244

Influence of the ionic strength on the adsorption properties of the system dispersed aluminium oxide–polyacrylic acid

245

Influence of the ionic strength on the structure of polyelectrolyte films at the solid/liquid interface

246

Influence of the ion–solvent interactions on ionic transport through ion-exchange-membranes

247

Influence of the iron precursor in the preparation of heterogeneous Fe/activated carbon Fenton-like catalysts Original Research Article

248

Influence of the iron source on the solar photo-Fenton degradation of different classes of organic compounds

249

Influence of the irradiation distance and the use of cooling to increase enamel-acid resistance with Er:YAG laser

250

Influence of the irradiation distance and the use of cooling to increase enamel-acid resistance with Er:YAG laser

251

Influence of the isolation procedure on the characteristics of fiber-rich products obtained from quince wastes Original Research Article

252

Influence of the Isolator Characteristics on the Response of the Isolated Buildings in the Near-Fault Earthquakes

253

Influence of the Istranca–Rhodope Massifs and strands of the North Anatolian Fault on oil potential of Thrace Basin, NW Turkey

254

Influence of the joint shape on the uniaxial mechanical properties of non-homogeneous bonded perforated hollow sphere structures

255

Influence of the kind of fuel oil on the deposit composition in the diesel engine combustion chamber

256

Influence of the Kind of Layered Disodium Disilicates on the Formation of Silica-Organic Mesostructured Materials

257

Influence of the kneading water content in the behaviour of single-coat mortars

258

Influence of the Kuroshio current intrusion on depositional environment in the Northern South China Sea: Evidence from surface sediment records

259

Influence of the laminate thickness in low velocity impact behavior of composite material plate

260

Influence of the lanthanide contraction on the transition temperatures of rare-earth containing metallomesogens with Schiff base ligands

261

Influence of the laser wavelength on the epitaxial growth and electrical properties of La0.8Sr0.2MnO3 films grown by excimer laser-assisted MOD

262

Influence of the lattice structure on the Curie temperature of a thin quantum spin Heisenberg film

263

Influence of the layer thickness and hydrogen dilution on electrical properties of large area amorphous silicon p–i–n solar cell

264

Influence of the leaving group and of the annelation in the electroreduction of 2-methyl-substituted quinones

265

Influence of the left ventricular types on QT intervals in hypertensive patients

266

Influence of the length of proestrus on fertility and endocrine function in female cattle

267

Influence of the leprosy drug, dapsone on the model membrane dipalmitoyl phosphatidylethanolamine

268

Influence of the level of cathodic protection on the corrosion fatigue properties of high-strength welded joints

269

Influence of the level of damage on the high temperature fatigue life of an aircraft turbine disc

270

Influence of the level of fit of a density probability function to wind-speed data on the WECS mean power output estimation

271

Influence of the level of molasses in de-oiled rice bran-based concentrate mixture on rumen fermentation pattern in crossbred cattle calves

272

Influence of the Lewis acidity of indium-modified beta zeolite in the m-xylene transformation Original Research Article

273

Influence of the Li+ on the Structure of the [Cu3(phis)3]3+ Cation

274

Influence of the LiCoO2 particle size on the performance of lithium-ion batteries

275

Influence of the ligand donor atoms on the in vitro stability of rhenium(I) and technetium (I)-99m complexes with pyrazole-containing chelators: Experimental and DFT studies

276

Influence of the Ligand on the Coupling between the Metal-Based Electrons in Face-Shared [M2X9]^3- (M = Mo, W; X = F, Cl, Br, I) Systems

277

Influence of the ligand structure of hafnocene polymerization catalysts: A theoretical study on chain termination reactions in ethene polymerization

278

Influence of the ligands and solvents on the magnetic properties of the single molecule magnets: [Mn12O12(O2CR)16(L)4]·nS (R=3-ClC6H4, L=3-ClC6H4CO2H and water, n=1, S=3-ClC6H4CO2H (1); R=CH2Cl, L=water, n=0 (2))

279

Influence of the light source on the low-irradiance performance of Cu(In,Ga)Se2 solar cells

280

Influence of the linker length on the host–guest properties of alkoxy- and polypyridine-bridged molecular rectangles of formulae {[Re(CO)3(OC5H11)]4(L)2}, with L = 4-pyridinealdazine and 4,4′-azobis(pyridine)

281

Influence of the Linking Order of Fragments of HA2 and М2е of the influenza A Virus to Flagellin on the Properties of Recombinant Proteins

282

Influence of the lipid composition on the membrane affinity, and the membrane-perturbing ability of cetylpyridinium chloride

283

Influence of the liquid saturation degree on the fluid dynamics of a spouted-bed coater

284

Influence of the liquid viscosity on the formation of bubble structures in a 20 kHz field

285

Influence of the liquid viscosity on the formation of bubble structures in a 20 kHz field

286

Influence of the liquid-phase mass transfer on the performance of a packed-bed bioreactor for wastewater treatmen

287

Influence of the lithium salt nature over the surface film formation on a graphite electrode in Li-ion batteries: An XPS study

288

Influence of the load application rate and the statistical model for brittle failure on the bending strength of extruded ceramic tiles

289

Influence of the load history on the edge strength of glass with arrised and ground edge finishing

290

Influence of the load ratio on the threshold stress intensity factor range for heavily drawn steel wires

291

Influence of the loading direction on the mechanical behavior of ceramic foams and lattices under compression Original Research Article

292

Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear

293

Influence of the local dielectric constant on modeling the optical absorption of silver nanoparticles in silica gels

294

Influence of the local electric field on ionic transport during redox switching of conducting polymers Original Research Article

295

Influence of the local environment on lacustrine sedimentary phytolith records

296

Influence of the local pH on the electrooxidation of glycerol on Palladium–Rhodium electrodeposits

297

Influence of the local variation of the polarization resistance on SOFC cathodes

298

Influence of the location of the parotid duct orifice on oral clearance

299

Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials

300

Influence of the Loire River on Dissolved Lead and Cadmium Concentrations in Coastal Waters of Brittany

301

Influence of the long-range interaction on the energy localization in 1D chain with an impurity

302

Influence of the loss of time-constants repertoire in pathologic heartbeat dynamics

303

Influence of the louver and delta winglet geometry on the thermal hydraulic performance of a compound heat exchanger

304

Influence of the lubricating oil pressure and temperature on the performance at low speeds of a centrifugal compressor for an automotive engine

305

Influence of the lubricoolant strategy on thermo-mechanical tool load

306

Influence of the Mackenzie River plume on the sinking export of particulate material on the shelf

307

Influence of the macro and micro-porous structure on the mechanical behavior of poly(l-lactic acid) scaffolds

308

Influence of the magnetic field and the conductance ratio on the mass transfer rotating lid driven flow

309

Influence of the magnetic field on DLC coatings grown by plasma immersion ion implantation and deposition in crossed fields

310

Influence of the magnetic field on the electric conductivity of magnetorheological elastomers

311

Influence of the magnetic force on the van der Waals force of superparamagnetic composite particles

312

Influence of the magnetic toroidal field on the design of magnet systems for future fusion reactors

313

Influence of the magnetostatic coupling in magnetization switching driven by spin-polarized current

314

Influence of the magnetostatic coupling in magnetization switching driven by spin-polarized current

315

Influence of the main cereal in the diet and particle size of the cereal on productive performance and digestive traits of brown-egg laying pullets

316

Influence of the male effect on the reproductive performance of female Payoya goats implanted with melatonin at the winter solstice

317

Influence of the management regime and phenological state of the vines on the physicochemical properties and the seasonal fluctuations of the microorganisms in a vineyard soil under semi-arid conditions

318

Influence of the manufacturing heat cycles on the CuCrZr properties

319

Influence of the manufacturing process on the crystallization behavior of a CZS glass system

320

Influence of the manufacturing technology on microchannel structure efficiency

321

Influence of the mass and stiffness ratio on a periodic motion of two impacting oscillators

322

Influence of the mass ratio on the fluidelastic instability of a flexible cylinder in a bundle of rigid tubes

323

Influence of the mass ratio on viscosity in Lennard–Jones mixtures: The one-fluid model revisited using nonequilibrium molecular dynamics

324

Influence of the material composition on the nitriding result of steels by plasma immersion ion implantation

325

Influence of the matrix and of the thermal treatment on the martensitic transformation in metal matrix composites

326

Influence of the matrix composition on the volatility and sensory perception of 4-ethylphenol and 4-ethylguaiacol in model wine solutions

327

Influence of the matrix in bioavailability of flufenoxuron, lufenuron, pyriproxyfen and fenoxycarb residues in grapes and wine

328

Influence of the matrix microstructure on the mechanical properties of CVI-infiltrated carbon fiber felts Original Research Article

329

Influence of the matrix texture on the fracture behavior of 2D carbon/carbon composites

330

Influence of the meandering channel geometry on the thermo-hydraulic performances of an intensified heat exchanger/reactor

331

Influence of the measurement conditions on the sensitivity of SnO2 gas sensors operated thermo-cyclically

332

INFLUENCE OF THE MEASUREMENT MEDIUM AND MATRIX MODIFIERS ON THE DETERMINATION OF SILICON IN WATERS BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY

333

Influence of the mechanical alloying parameters on crystallite size of Ti-Al powders

334

Influence of the mechanical behavior law on the drying of an alumina gel

335

Influence of the mechanical behaviour of different adhesives on an interference-fit cylindrical joint

336

Influence of the mechanical behaviour specificities of damaged refractory castables on the Youngʹs modulus determination

337

Influence of the mechanical limitations of a traction system on energy storage design Original Research Article

338

Influence of the mechanical sample treatment on the thermally stimulated exoelectron emission in aspect of the application for sample dating

339

Influence of the Media on the Activation Parameters of the Chain Propagation Step in the Liquid Phase Oxidation of Methyl Ethyl Ketone

340

Influence of the medium electrolyte concentration on the electric polarizability of bacteria Escherichia coli in presence of ethanol

341

Influence of the medium on the assessment of LDL resistance to oxidation: lag time in phosphate buffered saline is longer than in sodium chloride solution

342

Influence of the melting conditions of heavy metal oxide glasses containing bismuth oxide on their optical absorption

343

Influence of the membrane dipole potential on peptide binding to lipid bilayers Original Research Article

344

Influence of the membrane treatment on structure and properties of sulfonated poly(etheretherketone) semi-interpenetrating polymer network

345

Influence of the menstrual cycle on the timing of acute coronary events in premenopausal women

346

Influence of the Mercury gravity field on the orbit insertion strategy of BepiColombo

347

Influence of the meshing clearance on the performance of conjugate helical surfaces

348

Influence of the mesoconfining solid on gas oversolubility in nanoliquids

349

Influence of the meso-macroporous ZrO2–TiO2 calcination temperature on the pre-reduced Pd/ZrO2–TiO2 (1/1) performances in chlorobenzene total oxidation

350

Influence of the meso-structure in dynamic fracture simulation of concrete under tensile loading

351

Influence of the met → THR substitution in kringle IV type 10 of apoliprotein(a) on functional characteristics of lipoprotein(a)

352

Influence of the metabolic sequelae of liver cirrhosis on nutritional intake

353

Influence of the Metabolic Syndrome Versus the Sum of Its Individual Components on Left Ventricular Geometry in Young Adults (from the Bogalusa Heart Study)

354

Influence of the metal and chiral diamine on metal(II)salen catalysed, asymmetric synthesis of α-methyl α-amino acids

355

Influence of the metal and of the support on the activity and stability of bifunctional catalysts for toluene hydrogenation Original Research Article

356

Influence of the metal center on the morphology of coordination compounds thin films

357

Influence of the metal ion on the structures of complexes formed by the extended reach ligand N,N-mphenylenedimethylenebis(pyridin-2-one)

358

Influence of the metal nitrates to citric acid molar ratio on the combustion process and phase constitution of barium hexaferrite particles prepared by sol–gel combustion method

359

Influence of the metal oxide support on the surface and catalytic properties of sulfated vanadia catalysts for selective oxidation of methanol

360

Influence of the metal particle size on toughness of Al2O3/Mo composite Original Research Article

361

Influence of the metallic matrix ratio on the wear resistance (dry and slurry abrasion) of plasma sprayed cermet (chromia/stainless steel) coatings

362

Influence of the Metallic Precursor and of the Catalytic Reaction on the Activity and Evolution of Pt(Cl)/δ-Al2O3 Catalysts in the Total Oxidation of Methane

363

Influence of the metallurgical instability on the gigacycle fatigue regime

364

Influence of the Metal–Metal Sigma Bonding on the Structures and Physical Properties of the Hexagonal Perovskite-Type Sulfides Sr9/8TiS3, Sr8/7TiS3, and Sr8/7[Ti6/7Fe1/7]S3

365

Influence of the methacrylate monolith structure on genomic DNA mechanical degradation, enzymes activity and clogging

366

Influence of the method of activation on the structural and sorption properties of the products of carbonization of sucrose

367

Influence of the method of activation on the structural and sorption properties of the products of carbonization of sucrose

368

Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement

369

Influence of the method of production of eggs on the daily intake of polycyclic aromatic hydrocarbons and organochlorine contaminants: An independent study in the Canary Islands (Spain)

370

Influence of the method of protein extraction on the in-vitro evaluation of mineral dialysability from legumes

371

Influence of the method of synthesis on hydrogen adsorption properties of mesoporous binary B2O3/Al2O3 gel systems

372

Influence of the Methylene Blue Dye (MBD) on the corrosion inhibition of mild steel in 0.5 M sulphuric acid, Part I: weight loss and electrochemical studies

373

Influence of the Mg-content on the cation distribution in cubic MgxFe3−xO4 nanoparticles

374

Influence of the micro- and nanoscale local mechanical properties of the interfacial transition zone on impact behavior of concrete made with different aggregates

375

Influence of the microchannel plates design on the efficiency of the methanol steam reforming in microreactors

376

Influence of the microscopic properties of the support on the catalytic activity of Au/ZnO, Au/ZrO2, Au/Fe2O3, Au/Fe2O3–ZnO, Au/Fe2O3–ZrO2 catalysts for the WGS reaction Original Research Article

377

Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds

378

Influence of the microstructural inhomogeneities on the martensite-to-austenite phase transformation temperatures in TiNiCu-based shape-memory alloys

379

Influence of the microstructure and composition on the thermal–physical properties of hard candy and cooling process

380

Influence of the microstructure and topography on the barrier properties of oxide scales generated on blasted Ti6Al4V surfaces

381

Influence of the microstructure evolution of ZrO2 fiber on the fracture toughness of ZrB2–SiC nanocomposite ceramics

382

Influence of the microstructure of aluminium alloys on their residual impact properties after a fatigue loading program

383

Influence of the microstructure of carbon nanotubes on the oxidative dehydrogenation of ethylbenzene to styrene

384

Influence of the microstructure of several substrates on the SERS effect of p-hyroxybenzoic absorbed on Ag nanoparticles

385

Influence of the microstructure of the aluminum substrate on the regularity of the nanopore arrangement in an alumina layer formed by anodic oxidation

386

Influence of the microstructure on electrochemical corrosion and nickel release in NiTi orthodontic archwires

387

Influence of the microstructure on fatigue and fracture toughness properties of large heat-treated mold steels

388

Influence of the microstructure on the corrosion behavior of AXJ530 magnesium alloy in 3.5% NaCl solution

389

Influence of the microstructure on the corrosion behaviour of a shape memory Cu–Al–Be alloy in a marine environment

390

Influence of the microstructure on the electrochemical performance of thin film WO3 cathode

391

Influence of the microstructure on the fatigue damage behaviour of the aluminium cast alloy AlSi7Mg0.3

392

Influence of the microstructure on the formation of alumina scales on near stoichiometric RuAl produced by arc melting

393

Influence of the microstructure on the high temperature behaviour of gel-derived SiOC glasses

394

Influence of the microstructure on the interreaction of Al/Ni investigated by tomographic atom probe

395

Influence of the microstructure on the interreaction of Al/Ni investigated by tomographic atom probe

396

Influence of the microstructure on the machinability of heat-treated Al–10.8% Si cast alloys: Role of copper-rich intermetallics

397

Influence of the microstructure on the mechanical properties of Ni/Sn multilayered composites

398

Influence of the microstructure on the mechanical properties of Ni/Sn multilayered composites

399

Influence of the microstructure on the plastic behaviour of duplex stainless steels

400

Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy

401

Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy

402

Influence of the microstructure on the residual stresses of nitrided iron–chromium alloys Original Research Article

403

Influence of the microstructure on the stability of the intrinsic two-way shape memory effect

404

Influence of the microstructure on the stability of the intrinsic two-way shape memory effect

405

Influence of the microstructure on the supercapacitive behavior of polyaniline/single-wall carbon nanotube composites

406

Influence of the microstructure on the tensile and impact properties of a 14Cr ODS steel bar

407

Influence of the microstructure on the toughness of a duplex stainless steel UNS S31803

408

Influence of the microwave absorbent and moisture content on the microwave pyrolysis of an organic municipal solid waste

409

Influence of the microwave absorbent and moisture content on the microwave pyrolysis of an organic municipal solid waste

410

Influence of the microwave technology on the physical–chemical properties of solid dispersion with Nimesulide

411

Influence of the middle weak layer on the impact behavior of laminated structures

412

Influence of the migration of chloride ions on the electrochemical impedance spectroscopy of mortar paste

413

Influence of the milling environment on the reaction progress in the Si–Al2O3 system

414

Influence of the milling parameters on the mechanical work intensity in planetary mills

415

INFLUENCE OF THE MINERAL FERTILIZATION AND THE INOCULATION WITH RHIZOBIUM LEGUMINOSARUM STRAIN ONTO THE ENERGY EFFICIENCY OF THE FORAGE WINTER PEA PRODUCT

416

Influence of the mite Carpoglyphus lactis (L) on the aroma of pale and dry wines aged under flor yeasts

417

Influence of the mite Carpoglyphus lactis (L) on the aroma of pale and dry wines aged under flor yeasts

418

Influence of the mixed micelles on the electron transfer reaction [Co(NH3)5Cl]2+ + [Fe(CN)6]4−

419

Influence of the mixed ratio on the photocurrent of the TiO2/SnO2 composite photoelectrodes sensitized by mercurochrome

420

Influence of the mixing process on surimi seafood paste properties and structure Original Research Article

421

Influence of the mixture of gasoline and diesel fuels on droplet atomization, combustion, and exhaust emission characteristics in a compression ignition engine

422

Influence of the mobile phase composition on chiral recognition of some pyrrolidin-2-ones in the liquid chromatographic system with polysaccharide stationary phases

423

Influence of the mode of matrix porosity determination on matrix diffusion calculations

424

Influence of the Mode of Tillage on Diseases of Culm Base in some Winter Wheat varieties, Oats and Spring Wheat

425

Influence of the Mode of Water Coordination on the Electronic Structure of the [V(OH2)6]3+ Cation

426

Influence of the model for random birefringence on the differential group delay of periodically spun fibers

427

Influence of the modelling approach on the estimation of the minimum temperature for growth in Belehrádek-type models Original Research Article

428

INFLUENCE OF THE MODERN SPRAYER CALIBRATION ON THE QUALITY OF APPLICATION

429

Influence of the modes of thermomechanical preloading on the resistance of heat-resistant steels to brittle fracture

430

Influence of the modification conditions of alkyl bonded ligands on the characteristics of reversed-phase liquid chromatography

431

Influence of the modification of P/L ratio on a new formulation of acrylic bone cement

432

Influence of the modification, induced by zirconia nanoparticles, on the structure and properties of polycarbonate

433

Influence of the modifying cations on physical properties of fluorozirconate glasses

434

Influence of the modulating interfacial state on Sr2FeMoO6 powder magnetoresistance properties

435

Influence of the molecular environment on the hyperfine interaction of 111Cd ions in gaseous radioactive 111InI3 Original Research Article

436

Influence of the molecular environment on the hyperfine interaction of 111Cd ions in gaseous radioactive indium halides Original Research Article

437

Influence of the molecular orientation on Schottky cells based on octithiophene

438

Influence of the molecular shape on the film growth of a substituted phthalocyanine

439

Influence of the molecular structure and medium on the absorption and emission character of ketocoumarin derivatives and probability of as fluorescence probes

440

Influence of the molecular structure on indentation size effect in polymers

441

Influence of the molecular structure on the aggregation of imidazolium ionic liquids in aqueous solutions

442

Influence of the molecular structure on the optical absorption and emission of PPV derivatives

443

Influence of the molecular structure on the viscosity of some alkoxyethanols

444

Influence of the Molecular Weight of Polymer on the Poly Vinyl Pyrrolidone and Zinc Sulfate Phase Diagram of Aqueous Two-Phase Systems

445

Influence of the molten quenching temperature on the thermal physical behavior of quenched Zr-based metallic glasses

446

Influence of the molybdenum thickness on the conversion efficiency of thin-film a-Si:H solar cells grown on a 304 stainless steel substrate

447

Influence of the moment exerted by the athlete on the pole in pole-vaulting performance

448

Influence of the Monitoring and Control Strategies of Indigenous and Expatriate Nigerian Contractors on Project Outcome

449

Influence of the morphology and impurities of Ni(OH)2 on the synthesis of neutral Ni(II)–amino acid complexes

450

Influence of the morphology and of the composition of chromium oxides on their catalytic activity for the gas phase fluorination of 1,1,1-trifluoro-2-chloro-ethane. Preparation of hydrofluorocarbons Original Research Article

451

Influence of the morphology and the surface chemistry of carbons on their catalytic performances in the catalytic wet peroxide oxidation of organic contaminants Original Research Article

452

Influence of the morphology of barium sulfate nanofibers and nanospheres on the physical properties of polyurethane nanocomposites

453

Influence of the morphology of ferroelectric SrBi2Ta2O9 thin films deposited by metal organic decomposition on its electrical characteristics

454

Influence of the morphology of long-period stacking ordered phase on the mechanical properties of as-extruded Mg–5Zn–5Y–0.6Zr magnesium alloy

455

Influence of the morphology of platinum combined with β-Ga2O3 on the VOC response of work function type sensors

456

Influence of the morphology of polyaniline on the microwave absorption properties of epoxy polyaniline composites

457

Influence of the morphology on the platinum electrode surface activity

458

Influence of the movement of "over full-length cavity" cylindrical samples along the x-axis of a double TE104 and a single TE102 rectangular cavity on the electron paramagnetic resonance An unusual effect analysis

459

Influence of the movement of “over full-length cavity” cylindrical samples along the x-axis of a double TE104 and a single TE102 rectangular cavity on the electron paramagnetic resonance: An unusual effect analysis Original Research Article

460

Influence of the myotome zone and sex on the muscle cellularity and fillet ‎texture of diploid and triploid turbots Scophthalmus maximus L.‎

461

Influence of the N:P supply ratio on biomass productivity and time-resolved changes in elemental and bulk biochemical composition of Nannochloropsis sp.

462

Influence of the N2 partial pressure on the mechanical properties and tribological behavior of zirconium nitride deposited by reactive magnetron sputtering

463

Influence of the N2/H2 ratio on the structural features of InxGa1−xN/GaN films grown by MOCVD

464

Influence of the nanoscale structural features on the properties and electronic structure of Al-doped ZnO thin films: An X-ray absorption study

465

Influence of the nanostructural characteristics on the gas sensing properties of pulsed laser deposited tin oxide thin films

466

Influence of the nanostructuration of PVD hard TiN-based films on the durability of coated steel

467

Influence of the natural flake graphite particle size on the textural characteristic of exfoliated graphite used for heavy oil sorption

468

Influence of the nature and treatment of starch on aroma retention

469

Influence of the nature of aggregates on the behaviour of concrete subjected to elevated temperature

470

Influence of the nature of conductive support on the electrocatalytic activity of electrodeposited Ni films towards methanol oxidation in 1 M KOH

471

Influence of the nature of dietary fibre on digestive utilization, some metabolite and hormone profiles and the behaviour of pregnant sows

472

Influence of the nature of forage and concentrate on the digestive interactions measured in sacco and in vivo

473

Influence of the nature of interfaces on the capillary transport in layered materials

474

Influence of the nature of non-polar phase on the mechanical stability of adsorption layers of hydrocarbon and fluorocarbon surfactants at the interface between their aqueous solutions and non-polar media

475

Influence of the nature of polyaniline-based hole-injecting layer on polymer light emitting diode performances

476

Influence of the Nature of Residual Alkali Cations on the Catalytic Activity of Zeolites X, Y, and EMT in their Brønsted Acid Forms

477

Influence of the nature of sol–gel matrices on absorption and fine-structure fluorescence spectra of hypericin

478

Influence of the nature of the Ce-promoter on the behavior of Pd and Pd–Cr TWC systems Original Research Article

479

Influence of the nature of the electrolyte on the chiral separation of basic compounds in nonaqueous capillary electrophoresis using heptakis(2,3-di-O-methyl-6-O-sulfo)-β-cyclodextrin

480

Influence of the nature of the exudates released by different marine algae on the growth, trace metal uptake and exudation of Emiliania huxleyi in natural seawater

481

Influence of the nature of the gas in the edge-tone phenomenon

482

Influence of the nature of the ligand on the microstructure of poly d,l-lactides prepared with organoaluminum initiators

483

Influence of the nature of the metal ions on the complexation with chitosan.: Application to the treatment of liquid waste

484

Influence of the nature of the porous confining network on the sorption, diffusion and mechanical properties of hydrogel IPNs

485

Influence of the nature of the precursor salts on the properties of Rh–Ge/TiO2 catalysts for citral hydrogenation

486

Influence of the nature of the Roots blower on pressure fluctuations in a fluidized bed

487

Influence of the nature of the solvent of crystallization on X-ray crystal structures of para-azidomethyltetrahydroxy-calix[4]arene

488

Influence of the nature of the solvent on the 19F chemical shift of the [BF4]− anion

489

Influence of the nature of the supporting electrolyte on the formation of poly[4,4′-bis(butylsulphanyl)-2,2′-bithiophene] films. A role for both counter-ion and co-ion in the polymer growth and p-doping processes

490

Influence of the nature of the surface of polypyrrole films upon their interaction with volatile organic compounds

491

Influence of the nature of titanium source and of vanadia content on the properties of titanium-pillared montmorillonite Original Research Article

492

Influence of the Nazaré Canyon, central Portuguese margin, on late winter coccolithophore assemblages

493

Influence of the nearest environment of the core on the power pulse dynamics in the IBR-2 reactor

494

Influence of the network modifier on the characteristics of MSnO3 (M=Sr and Ca) thin films synthesized by chemical solution deposition

495

Influence of the network on conductivity in ternary CaO–Al2O3–SiO2 glasses and melts

496

Influence of the new definition of acute myocardial infarction on coronary care unit admission, discharge diagnosis, management and outcome in patients with non-ST elevation acute coronary syndromes: A national survey

497

Influence of the Ni substitution for Co on 4f–3d interactions in ErCo10−xNixSi2 (0≤x≤10)

498

Influence of the nitriding and TiAlN/TiN coating thickness on the sliding wear behavior of duplex treated AISI H13 steel

499

Influence of the nitriding time in the wear behaviour of an AISI H13 steel during a crankshaft forging process

500

Influence of the nitrification inhibitor 3,4-dimethylpyrazole phosphate (DMPP) in comparison to dicyandiamide (DCD) on nitrous oxide emissions, carbon dioxide fluxes and methane oxidation during 3 years of repeated application in field experiments

501

Influence of the nitrogen concentration on the electrical characteristic of hydrogenated amorphous silicon nitride (a-SiNx:H) based Schottky diodes

502

Influence of the nitrogen content on the electrochemical capacitor characteristics of vertically aligned carbon nanotubes

503

Influence of the nitrogen content on the field emission properties of a-CNx films prepared by pulsed laser deposition

504

Influence of the nitrogen contents on the permeability characteristics and soft magnetic properties of FeHfN films

505

Influence of the nitrogen flow rate on the order and structure of PECVD boron nitride thin films

506

Influence of the nitrogen pressure on the structure and properties of (Ti,Al)N coatings deposited by cathodic vacuum arc PVD process

507

Influence of the nodal tide on the morphological response of estuaries

508

Influence of the nonionic surfactant Triton X-100 on electrocrystallization and electrochemical performance of lead dioxide electrode

509

Influence of the non-isothermal conditions on the activity of enzymes immobilized on nylon grafted membranes

510

Influence of the nonlocal nature of fluctuations on coherent effects in multiple scattering

511

Influence of the non-singular stress on the crack extension and fatigue life

512

Influence of the normal force, abrasive slurry concentration and abrasive wear modes on the coefficient of friction in ball-cratering wear tests

513

Influence of the North Atlantic Oscillation (NAO) on climatic factors and estuarine water temperature on the Basque coast (Bay of Biscay): Comparative analysis of three seasonal NAO indices

514

Influence of the northern ionosphere on positioning precision

515

Influence of the nucleation time-lag on the activation energy in non-isothermal crystallization

516

Influence of the number of CH2CH2O groups on the viscosity of polyethylene glycol dimethyl ethers at high pressure

517

Influence of the number of periods on the magnetization reversal process of antiferromagnetically coupled amorphous CoxSi1−x/Si multilayers

518

Influence of the number of repellent-treated and untreated food or water containers on intake by the European starling

519

Influence of the number of rhizobia on the nodulation and establishment of Trifolium ambiguum

520

Influence of the number of rhizobia on the nodulation and establishment of Trifolium ambiguum

521

Influence of the number, position and length of the alkyl-substituents on the solubility of water in pyridinium-based ionic liquids

522

Influence of the nutation angle in gravitational settling of particles near vortices and in turbulence

523

Influence of the nutritional status in the clinical and therapeutical evolution in adults and elderly with American Tegumentary Leishmaniasis

524

Influence of the nutritional status on ovarian development in female pigs

525

Influence of the O/C ratio in the behaviour of TiCxOy thin films

526

Influence of the O2/CO ratio and the presence of H2O and CO2 in the feed-stream during the preferential oxidation of CO (PROX) over a CuOx/CeO2-coated microchannel reactor

527

Influence of the objective function in the history matching process

528

Influence of the objective function on the optimisation of a steam ejector cycle

529

Influence of the observation scale on permeability estimation at local and regional scales through well tests in a fractured and karstic aquifer (Lez aquifer, Southern France)

530

Influence of the oceanic cool skin layer on global air–sea CO2 flux estimates

531

Influence of the oceanographic conditions during spring 2003 on the transport of the Prestige tanker fuel oil to the Galician coast

532

Influence of the OH groups on the photocatalytic activity and photoinduced hydrophilicity of microwave assisted sol–gel TiO2 film

533

Influence of the oil globule fraction on the release rate profiles from multiple W/O/W emulsions

534

Influence of the oligomeric state of yeast hexokinase isozymes on inactivation and unfolding by urea Original Research Article

535

Influence of the olive variety and the zone of provenience on selenium content determined by cathodic stripping potentiometry (CSP) in virgin olive oils

536

Influence of the olivine additive fineness on the oxidation of magnetite pellets

537

Influence of the OPDA additions on impedance response and on anion exchange property of the modified PANI

538

Influence of the opening of the Drake Passage on the Cenozoic Antarctic Ice Sheet: A modeling approach

539

Influence of the operating conditions and kinetic analysis of the selective hydrogenation of oleic acid on Ru–Sn–B/Al2O3 catalysts Original Research Article

540

Influence of the operating conditions and of the optical transition on non-spectral matrix effects in inductively coupled plasma-atomic emission spectrometry

541

Influence of the operating conditions and of the optical transition on non-spectral matrix effects in inductively coupled plasma-atomic emission spectrometry

542

Influence of the operating conditions and the external mass transfer limitations on the synthesis of fatty acid esters using a Candida antarctica lipase

543

Influence of the operating conditions in the acetone pulping of wheat straw on the properties of the resulting paper sheets

544

Influence of the operating conditions on the elimination of zinc ions by nanofiltration Original Research Article

545

Influence of the operating conditions on the production rate of multi-walled carbon nanotubes in a CVD reactor Original Research Article

546

Influence of the operating conditions on the properties of paper sheets obtained by kraft pulping of olive tree wood

547

Influence of the operating conditions on yield and selectivity for the partial oxidation of ethane in a catalytic membrane reactor

548

Influence of the operating parameters and of the sample introduction system on time correlation of line intensities using an axially viewed CCD-based ICP-AES system

549

Influence of the operating parameters and of the sample introduction system on time correlation of line intensities using an axially viewed CCD-based ICP-AES system

550

Influence of the Operating Parameters on the Selective Catalytic Reduction of NO with Hydrocarbons Using Cu-Ion-Exchanged Titanium-Pillared Interlayer Clays (Ti-PILCs)

551

Influence of the operating parameters over dry reforming of methane to syngas

552

Influence of the operation pressure on slug length in near horizontal gas–liquid pipe flow

553

Influence of the Optic Disc Size on Cup Diameter in Patients with Glaucoma Simplex Chronicum

554

Influence of the Oral Administration of Fish Oil on Hematological and Biochemical Performance in Local Male Rabbits

555

Influence of the organic compounds addition in the polymer free volume, gas sorption and diffusion

556

Influence of the organic electrolyte and anodization conditions on the preparation of well-aligned TiO2 nanotube arrays in dye-sensitized solar cells

557

Influence of the organic matter composition on benthic oxygen demand in the Rhône River prodelta (NW Mediterranean Sea)

558

Influence of the organic phase on the properties of CrO3-derived chromia aerogels

559

Influence of the organism interface on the breast cancer detection by UWB

560

Influence of the orientation of the Osstell® transducer during measurement of dental implant stability using resonance frequency analysis: A numerical approach

561

Influence of the origin of the inoculum and the acclimation strategy on the degradation of 4-chlorophenol

562

Influence of the ortho-methoxyalkyl substituent on the properties of phenylboronic acids

563

Influence of the osmotic agent on the osmotic dehydration of papaya (Carica papaya L.) Original Research Article

564

Influence of the Outer Bath on the Eigenfrequencies of Rotating Axisymmetric Liquid Bridges

565

Influence of the Outer Surface Layers of Crystals on the X-Ray Diffraction Intensity of Basal Reflections

566

Influence of the overall charge and local charge density of pectin on the complex formation between pectin and β-lactoglobulin

567

Influence of the over-fire air angle on the flow field in a down-fired furnace determined by a cold-flow experiment

568

Influence of the overlap parameter on the convergence of the ptychographical iterative engine

569

Influence of the overlap parameter on the convergence of the ptychographical iterative engine

570

Influence of the overlapped area on the corrosion behaviour of laser treated aluminium alloys

571

Influence of the overlapped area on the corrosion behaviour of laser treated aluminium alloys

572

Influence of the oversea transportation under a ventilation regime on the quality of Valencia oranges Original Research Article

573

Influence of the oxidation on the surface properties of silicon carbide

574

Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites

575

Influence of the oxidation treatment and the average particle diameter of graphene for thermal conductivity enhancement

576

Influence of the oxidative stabilisation treatment time on the electrochemical performance of anthracene oils cokes as electrode materials for lithium batteries

577

Influence of the oxidative/reductive treatments on Pt/CeO2 catalyst for hydrogen iodide decomposition in sulfur–iodine cycle

578

Influence of the oxidative/reductive treatments on the activity of Pt/Ce0.67Zr0.33O2 catalyst

579

Influence of the Oxidoreductase ERp57 on the Folding of an Antibody Fab Fragment

580

Influence of the oxygen content on the transport and magnetic properties in layered manganites La2−2xSr1+2xMn2O7+δ with x being around 0.5

581

Influence of the oxygen feed distribution on the performance of a catalytic reactor for ATR of methane

582

Influence of the oxygen flow rate on the properties of reactively sputtered Ti–B–O films

583

Influence of the oxygen pretreatment on the CO2 reforming of methane on Ni/β-SiC catalyst

584

Influence of the oxygen/argon ratio on the properties of sputtered hafnium oxide

585

Influence of the oxygen-affected sites on decay times in Pr3+—activated fluoroaluminate glass

586

Influence of the pack thickness of the boronizing mixture on the boriding of steel

587

Influence of the packing heterogeneity on the performance of liquid chromatography supports

588

Influence of the PAni morphology deposited on the carbon fiber: An analysis of the capacitive behavior of this hybrid composite

589

Influence of the paprika type on redness loss in red line meat products

590

Influence of the Parameters of Disk Winding on the Impulse Voltage Distribution in Power Transformers

591

Influence of the parameters of temperature cycles on the cyclic fracture toughness of 5Kh3V3MFAS steel

592

Influence of the parametrization of water optical properties on the modelled sea surface temperature in the Baltic Sea*

593

Influence of the parasitoid Chelonus inanitus and its polydnavirus on host nutritional physiology and implications for parasitoid development

594

Influence of the para-substitution in bis(arylimino)pyridine iron complexes on the catalytic oligomerization and polymerization of ethylene

595

Influence of the parent zeolite structure on chromium speciation and catalytic properties of Cr-zeolite catalysts in the ethylene ammoxidation Original Research Article

596

Influence of the partial pressure of GaCl3 in the growth process of GaN by HVPE under nitrogen

597

Influence of the partial substitution of CaO with MgO on the thermal properties and in vitro reactivity of the bioactive glass S53P4

598

Influence of the partial substitution of Y2O3 with Ln2O3 (Ln = Nd, Sm, Gd) on the phase structure and thermophysical properties of ZrO2–Nb2O5–Y2O3 ceramics Original Research Article

599

Influence of the particle diameter and density in the gas velocity in jet spouted beds

600

Influence of the particle porosity on chromatographic band profiles

601

Influence of the particle size distribution of powders on the velocities of minimum and complete fluidization

602

Influence of the particle size of electrode materials on intercalation rate and capacity of new electrodes

603

Influence of the particle size on recrystallization and grain growth in Al-Mg-X alloys

604

Influence of the particle size on recrystallization and grain growth in Al-Mg-X alloys

605

Influence of the particle size on the electrochemical properties of lithium manganese oxide

606

Influence of the particle size on the microstructure and mechanical properties of grains containing mixtures of nanoparticles and microparticles: Levitator tests and pilot-scaled validation

607

Influence of the particle size on the release of inorganic trace elements during gasification of biomass pellets

608

Influence of the particle size on the rheological behaviour of chestnut flour doughs Original Research Article

609

Influence of the particle type on the rheological behavior of Pickering emulsions

610

Influence of the particle–turbulence modulation modelling in the simulation of a non-isothermal gas–solid flow

611

Influence of the patientʹs environment on the progression of Alzheimerʹs disease

612

Influence of the Pb–Bi hydrodynamics on the corrosion of T91 martensitic steel and pure iron

613

Influence of the PBL scheme on high-resolution photochemical simulations in an urban coastal area over the Western Mediterranean

614

Influence of the Pearl River estuary and vertical mixing in Victoria Harbor on water quality in relation to eutrophication impacts in Hong Kong waters

615

Influence of the pentaamine skeleton on the nitrito to nitro isomerization reactions on complexes of cobalt(III)

616

Influence of the periodic image on the electron transport in a magnetically modulated two-dimensional electron gas

617

Influence of the periodic potential shape on the Fokker–Planck dynamics

618

Influence of the peripheral alkyl chains length on the mesomorphic properties of electron acceptor π-extended HAT derivatives

619

Influence of the peripheral alkyl chains length on the mesomorphic properties of electron acceptor π-extended HAT derivatives

620

Influence of the permanent presence of rams on the resumption of sexual activity in postpartum Barbarine ewes

621

Influence of the permeability of the coal plastic layer on coking pressure

622

Influence of the peroxodisulfate counterion on the dodecyl sulfate adsorption onto polystyrene latex particles

623

Influence of the persistence of circulation patterns on warm and cold temperature anomalies in Europe: Analysis over the 20th century

624

Influence of the pH on the behavior of an imprinted polymeric stationary phase — supporting evidence for a binding site model

625

Influence of the pH on the dissolution of TPD and associated solid solutions

626

Influence of the pH on the pocket field of cytochrome c type proteins Original Research Article

627

Influence of the phase diagram on the diffuse interface thickness and on the microstructure formation in a phase-field model for binary alloy Original Research Article

628

Influence of the phenolic compound bearing species Ledum palustre on soil N cycling in a boreal hardwood forest

629

Influence of the phenomena occurring at the soft/hard interface on the coercivity behavior in exchange-spring magnets

630

Influence of the phenophase on the phenolic profile and antioxidant properties of Dalmatian sage

631

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

632

Influence of the Phosphodiesterase Type 5 Inhibitor, Sildenafil, on Some Behavioral and Central Biochemical Changes on Chronic Restraint Stress in Rats

633

Influence of the photoexcitation process on the dynamics of triplet excitons in organic polymers

634

Influence of the photoionization process on the fragmentation of laser desorbed polycyclic aromatic hydrocarbons

635

Influence of the photoperiod and light intensity on growth performance, Melatonin and Insulin-like growth factors gene expression on Acipenser persicus during the embryonic stage

636

Influence of the Physical Activity on the Cognitive Functions with People Depending on their Age

637

Influence of the physical and mechanical characteristics of sands on the hydraulic and biological behaviors of sand filters Original Research Article

638

Influence of the physical environment and conspecific aggression on the spatial arrangement of breeding grey seals

639

Influence of the physical forcing of different water masses on the spatial and temporal distributions of picophytoplankton in the northern East China Sea

640

Influence of the physical parameters of fields and of crop yield on the effective field capacity of a self-propelled forage harvester

641

Influence of the physical properties and handling of silica gel modified carbon paste electrodes on the phase transfer of solved Cu(II) ions Original Research Article

642

Influence of the physical states of membrane surface area and center area on lysosomal proton permeability

643

Influence of the physico-chemical characteristics of chito-oligosaccharides (COS) on antioxidant activity

644

Influence of the physicochemical characteristics of pollutants on their uptake in moss

645

Influence of the physico-chemical properties of CeO2–ZrO2 mixed oxides on the catalytic oxidation of NO to NO2

646

Influence of the physicochemical properties of clay minerals on the degree of darkening via polycondensation reactions between catechol and glycine

647

Influence of the physicochemical properties on the growth of solid particles by granulation in fluidized bed

648

INFLUENCE OF THE PHYSIOGRAPHY LOCATION ON CHARACTERISTICS OF THE SEDIMENTARY PLAIN SOILS IN AL-RIFAI DISTRICT, DHI QAR PROVINCE

649

Influence of the physiological stage and the content of soluble solids on the anthocyanin extractability of Vitis vinifera L. cv. Tempranillo grapes Original Research Article

650

Influence of the Piepho-mode on charge ordering in mixed-valence biferrocenium salts: Mössbauer spectra Original Research Article

651

Influence of the pile shape on wind erosion CFD emission simulation

652

Influence of the pile toe condition on the dynamic response of a group of pile foundations

653

Influence of the Pinatubo eruption on the aerosol optical depth in the Arctic in the summer of 1993

654

Influence of the pinhole size on the resolution of the 4Pi’ microscope studied by means of the optical transfer function

655

Influence of the pinhole size on the resolution of the 4Pi’ microscope studied by means of the optical transfer function

656

Influence of the Pipe Diameter on the Structure of the Gas-Liquid Interface in a Vertical Two-Phase Pipe Flow

657

Influence of the Planetary Boundary Layer Physics on Medium-range Prediction of Monsoon over India

658

Influence of the plasma edge on tokamak performance

659

Influence of the plasma on ICRF antenna voltage limits

660

Influence of the plasma parameters and nitrogen addition on the electrical characteristics of DLC films deposited by inductively coupled plasma deposition

661

Influence of the plasma pretreatment of GaAs 100/ and Si 100/ surfaces on the optical and structural properties of Si N rGaAs 3 4 and a-SiGerSi interfaces

662

Influence of the plasma profile and the antenna geometry on the matching and current distribution control of the ITER ICRF antenna array. Optimization of the decoupling-matching system

663

Influence of the Plastic Number on the Evolution of a Yield Stress Material Subjected to a Dam Break

664

Influence of the plasticity model in sheet metal forming simulations

665

Influence of the pliability of a testing machine on the resistance of metals to deformation in the case of jump-like development of their elastoplastic deformation

666

Influence of the plot area in an economical analysis for selecting small scale LNG technologies for remote gas production

667

Influence of the ploughing effect on the dynamic behaviour of the self-vibratory drilling head

668

INFLUENCE OF THE POISSON RATIO ON THE NATURAL FREQUENCIES OF STEPPED-THICKNESS CIRCULAR PLATE

669

Influence of the Polarity of the Medium on the Catalysis of Formation, Rate of Hydrolysis and Stability of the Schiff Bases Formed by Pyridoxal 5-Phosphate with L-Tryptophan

670

Influence of the polishing process on the near-surface zone of hardened and unhardened steel

671

Influence of the pollution on the admissible field error estimation for FE solutions of the Helmholtz equation

672

Influence of the poly(ethylene oxide)/polybutadiene IPN morphology on the ionic conductivity of ionic liquid

673

Influence of the polyacyl chloride structure on the reverse osmosis performance, surface properties and chlorine stability of the thin-film composite polyamide membranes

674

Influence of the polyanion on the physico-chemical properties and biological activities of polyanion/DNA/polycation ternary polyplexes

675

Influence of the polymer amount on bioactivity and biocompatibility of SiO2/PEG hybrid materials synthesized by sol–gel technique

676

Influence of the polymer architecture on the high temperature behavior of SiCO glasses: A comparison between linear- and cyclic-derived precursors

677

Influence of the polymer dielectric characteristics on the performance of a quaterthiophene organic field-effect transistor

678

Influence of the polymer matrix on the efficiency of hybrid solar cells based on silicon nanowires

679

Influence of the polymer pre-treatment before its electroless metallization

680

Influence of the polymer size on depletion attraction—induced gel and glass transitions of microgel colloids

681

Influence of the polymer structure and nanotube concentration on the conductivity and rheological properties of polyethylene/CNT composites

682

Influence of the polymeric hydrophobe on the kinetics of vinyl acetate miniemulsion polymerization

683

Influence of the polymerisation time on the porous and chromatographic properties of monolithic poly(1,2-bis(p-vinylphenyl))ethane capillary columns

684

Influence of the polysaccharides and the nitrogen compounds on foaming properties of sparkling wines

685

Influence of the pore generator on the evolution of the mechanical properties and the porosity and interconnectivity of a calcium phosphate cement

686

Influence of the pore network on hydrogen diffusion through blended cement pastes

687

Influence of the pore size in multi-walled carbon nanotubes on the hydrogen storage behaviors

688

Influence of the pore size of reversed phase materials on peptide purification processes

689

Influence of the pore structure and surface chemical properties of activated carbon on the adsorption of mercury from aqueous solutions

690

Influence of the pore structure of carbon fibers on the oxidation resistance of C/C composites

691

Influence of the porewater geochemistry on Fe and Mn assimilation in Laternula elliptica at King George Island (Antarctica)

692

Influence of the porosity gradient in cement paste matrix on the mechanical behavior of mortar

693

Influence of the porosity of RF sputtered Ta2O5 thin films on their optical properties for electrochromic applications

694

Influence of the porous structure of activated carbons in the activity of ATRP catalyst for methyl methacrylate polymerization

695

Influence of the porous texture of silica gels on the enzymatic activity of lipases in esterification reactions

696

Influence of the Portuguese Bend landslide on the character of the effluent-affected sediment deposit, Palos Verdes margin, southern California

697

Influence of the Post-Deformation Annealing Heat Treatment on the Low-Cycle Fatigue of NiTi Shape Memory Alloys

698

Influence of the postion of crew members on aerodynamics performance of two-man bobsleighInfluence of the postion of crew members on aerodynamics performance of two-man bobsleigh

699

Influence of the post-Miocene tectonic activity on the geomorphology between Andes and Pampa Deprimida in the area of Provincia de La Pampa, Argentina

700

Influence of the postpartum day on plasma estradiol-17 β levels, sexual behaviour, and conception rate, in artificially inseminated lactating rabbits

701

Influence of the post-synthesis method on the number and size of secondary mesoporous structure of NaY zeolite and its effect on catalyst loading. An efficient and eco-friendly catalyst for synthesis of xanthenes under conventional heating

702

Influence of the potential energy surface on the reaction cross section: the K + HF → KF + H system Original Research Article

703

Influence of the potential range on the aggregation of colloidal particles

704

Influence of the powder dimensions on the antimicrobial properties of modified layered double hydroxide

705

Influence of the powder particle size on tensile properties of Ni3Al processed by rapid solidification and hot isostatic pressing

706

Influence of the powder particle size on tensile properties of Ni3Al processed by rapid solidification and hot isostatic pressing

707

Influence of the powder/liquid ratio on the properties of zinc oxide–eugenol-based root canal sealers

708

Influence of the power supply on the energy efficiency of an alkaline water electrolyser

709

Influence of the Prandtl number on the location of recirculation eddies in thermocapillary flows

710

Influence of the Prandtl number on the stability of convective flows between non-isothermal concentric spheres

711

Influence of the precipitation pH of magnetite in the oxidation process to maghemite

712

Influence of the precipitation pH on the compositions and properties of Bi-based oxyiodide photocatalysts

713

Influence of the precursor and the calcination temperature on the dissolution of thorium dioxide

714

Influence of the precursor pyrolysis temperature on the microstructure and conductivity of Gd-doped ceria materials

715

Influence of the precursor solution chemistry on the deposition of thick coatings by spray pyrolysis

716

Influence of the precursors kind of catalysts on the course of a denox reaction

717

Influence of the precursors on the formation and properties of the FexCr2−xO3 solid solution

718

Influence of the pre-homogenization treatment on the microstructure evolution and the mechanical properties of Al–Cu alloys processed by ECAP

719

Influence of the preoperative signal-averaged electrocardiogram on left ventricular function after coronary artery bypass graft surgery in patients with left ventricular dysfunction

720

Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with CuI as a hole collector

721

Influence of the preparation method on the activity and stability of copper–zirconium catalysts for propene deep oxidation reaction

722

Influence of the preparation method on the activity of phosphate-containing CoMo/HMS catalysts in deep hydrodesulphurization Original Research Article

723

Influence of the preparation method on the catalytic behaviour of PtSn/TiO2 catalysts

724

Influence of the preparation method on the hydrotreating activity of MoS2/Al2O3 extrudates: A Raman microspectroscopy study on the genesis of the active phase

725

Influence of the preparation method on the morphological and composition properties of Pd–Au/ZrO2 catalysts and their effect on the direct synthesis of hydrogen peroxide from hydrogen and oxygen

726

Influence of the preparation method on the performance of Rh catalysts on CeO2 for WGS reaction

727

Influence of the preparation method on the physicochemical properties of econazole-loaded poly(butyl cyanoacrylate) colloidal nanoparticles

728

Influence of the preparation method on the properties of Cu–Co heterogeneous alloys

729

Influence of the preparation method on the properties of Fe-ZSM-5 for the selective catalytic reduction of NO by n-decane

730

Influence of the preparation method on the structural and surface properties of various magnesium oxides and their catalytic activity in the Meerwein–Ponndorf–Verley reaction Original Research Article

731

INFLUENCE OF THE PREPARATION METHOD ON THE STRUCTURE, PHASE FORMATION AND MAGNETIC PROPERTIES OF TEMPLATED CUFE2O4 SPINEL

732

Influence of the preparation method on the thiophene HDS activity of silica supported CoMo catalysts Original Research Article

733

Influence of the Preparation Method, Outgassing Treatment, and Adsorption of NO and/or O2 on the Cu2+ Species in Cu-ZSM-5: An EPR Study

734

Influence of the Preparation of Au/Al2O3 on CH4 Oxidation Activity

735

Influence of the preparation procedure of NSR monolithic catalysts on the Pt-Ba dispersion and distribution Original Research Article

736

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

737

Influence of the preparation process on the electrical properties of high-field co-doped zinc oxide varistors

738

Influence of the preparation temperature on the phase, microstructure and anti-oxidation property of a SiC coating for C/C composites Original Research Article

739

Influence of the preparative route on the properties of WOx–ZrO2 catalysts: A detailed structural, spectroscopic, and catalytic study

740

Influence of the pre-reformer in steam reforming of dodecane using a Pd alloy membrane reactor

741

Influence of the presence of a partially saturated layer on the interpretation in field permeability tests

742

Influence of the presence of heavy metals and surface-active compounds on the sorption of bisphenol A to sediment Original Research Article

743

Influence of the presence of methyl cyclodextrins in high-performance liquid chromatography mobile phases on the separation of β-carboline alkaloids

744

Influence of the presence of NaY zeolite on the activity of horseradish peroxidase in the oxidation of phenol

745

Influence of the presence of nitrite and nitrate in soil on maize biomass production, nitrogen immobilization and nitrogen recovery

746

Influence of the presence of PAHs and coal tar on naphthalene sorption in soils

747

Influence of the presence of poly(oxymethylene) on the pyrolysis oil from poly(vinyl chloride)

748

Influence of the presence of poly(oxymethylene) on the pyrolysis oil from poly(vinyl chloride)

749

Influence of the presence of surfactants and humic acid in waters on the indophenol-type reaction method for ammonium determination

750

Influence of the Presence of the Lorentz Force and its Direction on the Suppression of Secondary Flow in Two Different Orifices: A Numerical Study using OpenFOAM

751

Influence of the Preservative Material HOLDBAC™ on the Growth and Proliferation of Listeria on the Surfaces of cheeses

752

Influence of the pressure fluctuations on the temperature in pad/disc tribosystem

753

Influence of the pressure on the low temperature (7K) crystal structure of the superconducting molecular salt (TMTSF)2ClO4

754

Influence of the pressure on the properties of chromatographic columns: I. Measurement of the compressibility of methanol–water mixtures on a mesoporous silica adsorbent

755

Influence of the pressure on the properties of chromatographic columns: III. Retention volume of thiourea, hold-up volume, and compressibility of the C18-bonded layer

756

Influence of the pressure–temperature treatment on the polymerization of C60 single crystals at 2 GPa–700 K Original Research Article

757

Influence of the pretreatment method on the properties of trimetallic Pt–Ir–Ge/Al2O3 prepared by catalytic reduction Original Research Article

758

Influence of the pre-treatment on the structure and reactivity of Ir/γ-Al2O3 catalysts in the selective reduction of nitric oxide by propene Original Research Article

759

INFLUENCE OF THE PRIMARY SOLIDIFICATION ON THE SECONDARY SOLIDIFICATION DURING SEMISOLID METAL (SSM) PROCESSING OF A356.0 ALUMINUM ALLOY BY MECHANICAL STIRRING

760

Influence of the primary ZnCl2 intercalate on electrochemical biintercalation of H2SO4 into graphite Original Research Article

761

Influence of the principal geometrical parameters of straight city streets on positive and negative phase blast wave impulses

762

Influence of the probiotic Bacillus cereus var. toyoi on the intestinal immunity of piglets

763

Influence of the probiotic Bacillus cereus var. toyoi on the intestinal immunity of piglets

764

Influence of the process design on the control strategy: application in electropneumatic field

765

Influence of the process parameters and sugar granulometry on cocoa beverage powder steam agglomeration Original Research Article

766

Influence of the process parameters on the ESD synthesis of thin film YSZ electrolytes

767

Influence of the process parameters on the foam fractionation treatment of olive mill wastewater

768

Influence of the process parameters on the spray pyrolysis technique, on the synthesis of gadolinium doped-ceria thin film

769

Influence of the process temperature on the steel microstructure and hardening in pulsed plasma nitriding

770

Influence of the process vacuum on the device performance of organic light-emitting diodes

771

Influence of the process variables on mechanosynthesis of AgI–Ag2O–WO3 system

772

Influence of the processing conditions on the characteristics of the clad layers produced with laminar plasma technology

773

Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen☆

774

Influence of the processing parameters of slurries for the deposit of nickelate thick films

775

Influence of the processing parameters on the formation and deposition of particles in UV pulsed laser ablation of Al2O3–TiC ceramics

776

Influence of the processing route of porcelain/Ti–6Al–4V interfaces on shear bond strength

777

Influence of the processing route on the microstructure of aluminum alloy A356 for thixoforming

778

Influence of the processing temperature on the compressive strength of Na activated lateritic soil for building applications

779

Influence of the processing variables on the performance of MAGCLA™: Angle of the trunk and speed of rotation

780

Influence of the processing variables on the performance of MAGCLA™: Part I: Blank simulation

781

Influence of the production conditions on the structure and the microstructure of metallic glasses studied by neutron scattering

782

Influence of the production conditions on the structure and the microstructure of metallic glasses studied by neutron scattering

783

Influence of the products of the partial oxidation of methane (POM) on the catalytic performances of Rh/Ti-modified support catalysts Original Research Article

784

Influence of the pro-ecological tax on the market prices of fuels and electricity

785

Influence of the promoterʹs nature (nickel or cobalt) on the active phases ‘Ni(Co)MoS’ modifications during deactivation in HDS of diesel fuel

786

Influence of the propagation of three phase contact line on flotation recovery

787

Influence of the properties and characteristics of sugar-beet pulp extract on its fouling and rejection behaviour during membrane filtration Original Research Article

788

Influence of the properties of layer-by-layer active layers on forward osmosis performance

789

Influence of the properties of polypropylene fibres on the fracture behaviour of low-, normal- and high-strength FRC

790

Influence of the properties of TiO2 particles on a photocatalytic acrylate polymerisation

791

Influence of the properties of zeolite BEA on its performance in the nitration of toluene and nitrotoluene

792

Influence of the proportion of wood on the thermal and mechanical performances of clay-cement-wood composites

793

Influence of the proportion of wood on the thermal and mechanical performances of clay-cement-wood composites

794

influence of the Prostate Volume, Prostate Specific Antigen Density and Number of Biopsy Samples on Prostate Cancer Detection

795

Influence of The Prosthesis Type and Diameter in The Thrombocytopenia Associated with Aortic Valve Replacement Surgery

796

Influence of the protecting groups on the syn/anti stereoselectivity of boron aldol additions with erythrulose derivatives. A theoretical and experimental study

797

Influence of the protective strip properties on distribution of the temperature at transient frictional heating

798

Influence of the protein oligomericity on final yield after affinity tag removal in purification of recombinant proteins

799

Influence of the protocol of fibroin extraction on the antibiotic activities of the constructed composites

800

Influence of the protocol of fibroin extraction on the antibiotic activities of the constructed composites

801

Influence of the protocol used for fibroin extraction on the mechanical properties and fiber sizes of electrospun silk mats

802

Influence of the Proximal Margin Length on Local Anastomotic Recurrence in Adenocarcinoma of the Gastroesophageal Junction: A Single-center Experience

803

Influence of the proximity and amount of human development and roads on the occurrence of the red imported fire ant in the lower Florida Keys Original Research Article

804

Influence of the proximity effect on the energy resolution of STJs

805

Influence of the proximity effect on the energy resolution of STJs

806

Influence of the pseudophyllidean cestode Schistocephalus solidus on oocyte development in the threespine stickleback Gasterosteus aculeatus

807

Influence of the p-toluenesulphonylation of cellulose on the polymer dynamics investigated by dielectric spectroscopy

808

Influence of the public transportation system on the air quality of a major urban center. A case study: Milan, Italy

809

Influence of the pulsar parameters on γ-ray burst afterglows

810

Influence of the pulsating current amplitude on the dynamic friction coefficient of electrographite brushes Original Research Article

811

Influence of the pulse frequency and water cooling on the femtosecond laser ablation of bovine cortical bone

812

Influence of the pulse shape on the EDM performance of Si3N4–TiN ceramic composite

813

Influence of the pulsing of the current of a vacuum arc on rate and droplets

814

Influence of the punch profile on the limitation of formability in the hole-flanging process

815

Influence of the purification process on the semiconducting content of single-walled carbon nanotubes synthesized by arc discharge Original Research Article

816

Influence of the pyrolysis heating rate on the steam gasification rate of large wood char particles

817

Influence of the pyrolysis step and the tanning process on KOH-activated carbons from biocollagenic wastes. Prospects as adsorbent for CO2 capture

818

Influence of the pyrolysis step and the tanning process on KOH-activated carbons from biocollagenic wastes. Prospects as adsorbent for CO2 capture

819

Influence of the Qinghai-Tibetan railway and highway on the activities of wild animals

820

Influence of the quality and quantity of blood ingested on reproductive parameters and life-span in Triatoma infestans (Klug)

821

Influence of the Quality of Endodontic Treatment and Coronal Restorations on the Prevalence of Apical Periodontitis in a Turkish Cypriot Population

822

Influence of the Quality of Root Canal Treatment and Crown Restoration on the Prevalence of Apical Periodontitis

823

Influence of the quantum dot shape on the determination of the electronic structure and electron decoherence

824

Influence of the quenching temperature on the crystallization of the trans-planar mesomorphic form of syndiotactic polypropylene

825

Influence of the radial mode structure on the losses in the FELIX hole-coupled resonators

826

Influence of the rainfall measurement interval on the erosivity determinations in the Mediterranean area

827

Influence of the random dynamic parameters of the human body on the dynamic characteristics of the coupled system of structure–crowd

828

Influence of the rapeseed protein hydrolysis process on CHO cell growth

829

Influence of the rapid thermal annealing in vacuum on the XPS characteristics of thin SiO2

830

Influence of the rare earth content on the electrochemical behaviour of Al–Mg–Er alloys

831

Influence of the ratio copper(II) to ligand concentrations and the nature of entering and leaving ligands on the lability of copper(II) complexes

832

Influence of the ratio of free hydrogen ions on crystallization fouling

833

Influence of the ratio of planktonic to benthic diatoms on lacustrine organic matter δ13C from Erlongwan maar lake, northeast China

834

Influence of the ratio of the mass and volume of quail eggs on their morphometric indicators and incubation results

835

Influence of the raw material on the pore structure and elastic properties of compressed expanded graphite blocks

836

Influence of the Reaction Atmosphere on the Characteristics and Performance of VPO Catalysts

837

Influence of the reaction conditions on the activity properties of vanadium–aluminium oxynitride propane ammoxidation catalyst Original Research Article

838

Influence of the reaction conditions on the thermal stability of mesoporous MCM-48 silica obtained at room temperature

839

Influence of the reaction temperature on the electrochemical promoted catalytic behaviour of platinum impregnated catalysts for the reduction of nitrogen oxides under lean burn conditions Original Research Article

840

Influence of the real density and structure imperfection of hollow glass microspheres on the compression strength

841

Influence of the receiver’s back surface radiative characteristics on the performance of a heat-pipe evacuated-tube solar collector

842

Influence of the recovery and recrystallization processes on the martensitic transformation of cold worked equiatomic Ti–Ni alloy

843

Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process

844

Influence of the redox condition dynamics on the removal efficiency of a laboratory-scale constructed wetland

845

Influence of the Redox State of Pyridine Nucleotides on Mitochondrial Sulfhydryl Groups and Permeability Transition

846

Influence of the redox state of QA on phycobilisome mobility in the cyanobacterium Synechocystis sp. strain PCC 6803

847

Influence of the reducer efficiencies on the choice of motor and transmission: Torque peak of the motor

848

Influence of the reduction conditions of MoO3 on its isomerizing properties Original Research Article

849

Influence of the reduction state in the bulk and at the surface on the behavior of MoO3 catalysts in the reaction of 2-butanol (dehydration versus oxidation) in the presence of oxygen

850

Influence of the reduction temperature on catalytic activity of Co/TiO2 (anatase-type) for high pressure dry reforming of methane Original Research Article

851

Influence of the reductive preparation conditions on the morphology and on the electrochemical performance of Sn/SnSb

852

Influence of the refrigeration technique on the colour and phenolic composition of syrah red wines obtained by pre-fermentative cold maceration

853

Influence of the regional topography on the remote emplacement of hydrothermal systems with examples of Ticsani and Ubinas volcanoes, Southern Peru

854

Influence of the relative humidity on the air cooling thermal load in gas turbine power plant

855

Influence of the relative volumes between catalyst and Nafion ionomer in the catalyst layer efficiency

856

Influence of the relaxation processes on the structure formation in pure metals and alloys under high-pressure torsion Original Research Article

857

Influence of the repeated extrusion on the degradation of polyethylene. Structural changes in low density polyethylene

858

Influence of the reproductive cycle on cytochrome P450 levels in the sea star Coscinasterias muricata

859

Influence of the residual carbon content of biomass fly ashes on the filtration performance of ceramic surface filters at high temperatures

860

Influence of the residual stress on the nanoindentation-evaluated hardness for zirconiumnitride films

861

Influence of the residual stresses and distortions on the structural behavior of girth-welded cylindrical steel members

862

Influence of the residual stresses induced by tool wear on the failure of brass electro-valves

863

Influence of the Reynolds number and the spherical dimple depth on turbulent heat transfer and hydraulic loss in a narrow channel

864

Influence of the Reynolds number on the instant flow evolution of a turbulent rectangular free jet of air

865

Influence of the RF power on the deposition rate and the chemical surface composition of fluorocarbon films prepared in dry etching gas plasma

866

Influence of the rider on the variability of the equine gait

867

Influence of the roof on the natural periods of empty steel tanks

868

Influence of the roughness geometry of tool surface and the flow stress of coated solid lubricants on tribo-conditions in cold forging

869

Influence of the roughness model on the thermoelastohydrodynamic performances of lip seals

870

Influence of the roughness of aggregate surface on the interface bond strength

871

Influence of the S/Cd ratio on the luminescent properties of chemical bath deposited CdS films

872

Influence of the salinity on the interfacial properties of a Brazilian crude oil–brine systems

873

Influence of the salting time on volatile compounds during the manufacture of dry-cured pork shoulder “lacón”

874

Influence of the Sample Preservation Mode to Assess the Chronic Toxicity of an Industrial Effluent

875

Influence of the sample toxic profile on the suitability of a high performance liquid chromatography method for official paralytic shellfish toxins control

876

Influence of the sample-probe coupling on the resolution of transmitted near-field optical image

877

Influence of the sample-solvent on protein retention, mass transfer and unfolding kinetics in hydrophobic interaction chromatography

878

Influence of the sampling interval, decision limit and autocorrelation on the average run length in Cusum charts

879

Influence of the sampling site, the season of the year, the particle size and the number of nucleation events on the chemical composition of atmospheric ultrafine and total suspended particles

880

Influence of the sandblasting on the subsurface microstructure of 316LVM stainless steel: Implications on the magnetic and mechanical properties

881

Influence of the saturation–suction relationship in the formulation of non-saturated soil consolidation models

882

Influence of the Sb dopant distribution on far infrared photoconductivity in Ge:Sb blocked impurity band detectors

883

INFLUENCE OF THE SCALE EFFECT ON THE MECHANICAL PARAMETERS OF COARSE-GRAINED SOILS

884

Influence of the scan rate on the morphology of polyaniline grown on conducting fabrics. Centipede-like morphology

885

Influence of the scattered Cherenkov light on the width of shower images as measured in the EAS fluorescence experiments

886

Influence of the Schwabe Hale solar cycles on climate change during the Maunder Minimum

887

Influence of the Schwabe/Hale solar cycles on climate change during the Maunder Minimum

888

Influence of the Season on the Quantity and Chemical Composition of the Essential Oil and Synthesis of Secondary Metabolites in Cymbopogon martini (Roxb.) Wats.

889

Influence of the season on the relationships between NMR transverse relaxation data and water-holding capacity of turkey breast meat

890

Influence of the Second Bending Mode on the Response of High-Speed Bridges at Resonance

891

Influence of the second-phase particle size on grain growth based on computer simulation

892

Influence of the second-phase particle size on grain growth based on computer simulation

893

Influence of the sediment on lead speciation in the Tagus estuary

894

INFLUENCE OF THE SELECTED WAVELENGTH RANGE ON THE SIMULTANEOUS SPECTROPHOTOMETRIC DETERMINATION OF MIXTURE COMPONENTS BY USE OF PARTIAL LEAST-SQUARES REGRESSION

895

Influence of the selection of angiographic projections on the results of coronary angiographic follow-up trials

896

Influence of the self-interaction error on the structure of the DFT exchange hole

897

Influence of the sensitive zeolite material on the characteristics of a potentiometric hydrocarbon gas sensor

898

Influence of the separation of the charged groups and aromatic ring on interaction of tyrosine and phenylalanine analogues and derivatives with β-cyclodextrin Original Research Article

899

Influence of the sequence of administration of β-glucans and a Vibrio damsela vaccine on the immune response of turbot (Scophthalmus maximus L.)

900

Influence of the sequence of administration of β-glucans and a Vibrio damsela vaccine on the immune response of turbot (Scophthalmus maximus L.)

901

Influence of the sequence of experiments in a ruggedness test when drift occurs

902

Influence of the setting process and the formulation on the drying of hemp concrete

903

Influence of the Severity of Myocardial Ischemia on the Intensity of Ascorbyl Free Radical Release and on Postischemic Recovery during Reperfusion

904

Influence of the severity of obstructive sleep apnea on nocturnal heart rate indices and its association with hypertension

905

Influence of the shade designation on the color difference between the same shade-designated resin composites by the brand

906

Influence of the shallow impurity environment on the luminescence of single-quantum dots

907

Influence of the shape and position of the preform in the precision forging of a compressor blade

908

Influence of the shape and roughness of inclusions on the rheological properties of a cementitious suspension

909

Influence of the shape of a quasi-one-dimensional channel on the quantized acousto-electric current

910

Influence of the shape of the particles covering the metal surface on the dispersion relations of surface plasmons

911

Influence of the shaping effect on hardness homogeneity by Vickers indentation analysis

912

Influence of the sheath air humidity on the SMPS measurements of hygroscopic aerosols

913

Influence of the Si/Al ratio and crystal size on the acidity and activity of HBEA zeolites Original Research Article

914

Influence of the Si/Al ratio in the hydroisomerization of n-octane over platinum and palladium beta zeolite-based catalysts with or without binder Original Research Article

915

Influence of the SiC grain size on the wear behaviour of Al2O3/SiC composites

916

Influence of the sigB gene on the cold stress survival and subsequent recovery of two Listeria monocytogenes serotypes

917

Influence of the Si–Ge interface on phononless radiative recombination in Ge hut clusters grown on Si (0 0 1)

918

Influence of the silica content in SPEEK–silica membranes prepared from the sol–gel process of polyethoxysiloxane: Morphology and proton mobility

919

Influence of the Silica-to-Surfactant Ratio and the pH of Synthesis on the Characteristics of esoporous SBA-15

920

Influence of the silicon concentration on the optical and electrical properties of reactively sputtered Zr–Si–N nanocomposite coatings

921

Influence of the silicon content on the mechanical properties of AA6xxx laser welds

922

Influence of the silicon content upon the acidity and catalytic properties of AFI-like catalysts Original Research Article

923

Influence of the silicon overlayer thickness of SOI unibond substrates on β-SIC heteroepitaxy

924

Influence of the silicon overlayer thickness of SOI unibond substrates on β-SIC heteroepitaxy

925

Influence of the silicon surface treatment on the properties of SiNWs/PVK hybrid solar cells

926

Influence of the simultaneous substitution of Cu and Ru in the perovskite-type (La,Sr)MO3 (MAl, Mn, Fe, Co) on the catalytic activity for CO oxidation and CO–NO reactions Original Research Article

927

Influence of the sintering atmosphere on the tensile properties of MIM-processed Ti 45Al 5Nb 0.2B 0.2C

928

Influence of the sintering conditions on the properties of 0.57PSN–0.43PT ceramics prepared from mechanochemically activated powder

929

Influence of the sintering temperature on phase development in PMnN–PZT ceramics

930

Influence of the sintering temperature on the electrical and luminescent properties of Mn-doped ZnO

931

Influence of the sintering temperature on the structural feature and bioactivity of sol–gel derived SiO2–CaO–P2O5 bioglass

932

Influence of the sintering temperature on Youngʹs modulus and the shear modulus of tricalcium phosphate – fluorapatite composites evaluated by ultrasound techniques

933

Influence of the SiO thickness on the photoluminescence properties of Er-doped SiO/SiO2 multilayers

934

Influence of the SiO2/S coating and sulfur/phosphorus-containing coking inhibitor on coke formation during thermal cracking of light naphtha

935

Influence of the sire on market value of Belgian Blue x Brown Swiss crossbred calves

936

Influence of the size and frequency of contact transducers on the determination of concrete permeability by ultrasonic velocity and attenuation

937

Influence of the size and geometry of the anion binding pocket of sugar–urea anion receptors on chiral recognition

938

Influence of the size and shape of silica nanoparticles on the properties and degradation of a PBI-based high temperature polymer electrolyte membrane

939

Influence of the Size and Source of the Inoculum on Biodegradation Curves in Closed-Bottle Tests

940

Influence of the size distribution and concentration on wood dust explosion: Experiments and reaction modelling

941

Influence of the size of doping ion on phase stability and oxygen permeability of SrCo0.8Fe0.2O3−δ oxide

942

Influence of the size of extraframework monovalent cations in X-type zeolite on their thermal behavior

943

Influence of the size of self-assembled InAs/AlAs quantum dots on photoluminescence and resonant tunneling

944

Influence of the size reduction of organic waste on their anaerobic digestion

945

Influence of the Skin-Effect on the Convective Stability of a Binary Mixture in a Porous Layer with Modulation of the Boundary Temperature

946

Influence of the sliding velocity and the applied potential on the corrosion and wear behavior of HC CoCrMo biomedical alloy in simulated body fluids

947

Influence of the slip composition on the aqueous processing and properties of yttria stabilized zirconia green tapes

948

Influence of the slip composition on the properties of tape-cast alumina substrates

949

Influence of the slot inclination angle in FeP04 steel on fatigue crack growth under tension

950

Influence of the SMSI effect on the catalytic activity of a Pt(1%)/Ce0.6Zr0.4O2 catalyst: SAXS, XRD, XPS and TPR investigations

951

Influence of the sodium/proton replacement on the structural, morphological and photocatalytic properties of titanate nanotubes

952

Influence of the soft segment length and content on the synthesis and properties of isocyanate-terminated urethane prepolymers

953

Influence of the Software Algorithm on Risk Calculation in Down’s Syndrome Screening

954

Influence of the soil bioavailability of radionuclides on the transfer of uranium and thorium to mushrooms

955

Influence of the soil matrices on the analytical performance of headspace solid-phase microextraction for organotin analysis by gas chromatography-pulsed flame photometric detection

956

Influence of the soil properties on the seismic response of structures

957

Influence of the solar activity on the Indian Monsoon rainfall

958

Influence of the solar radiation on Earthʹs climate using the LMDz-REPROBUS model

959

Influence of the solar wind magnetic field on the Earth and Mercury magnetospheres in the paraboloidal model

960

Influence of the solar wind variations on atmospheric parameters in the southern polar region Original Research Article

961

Influence of the sol–gel chemistry on the activity of a lipase encapsulated in a silica aerogel

962

Influence of the sol–gel growth parameters on the optical and structural properties on LiNbO3 samples

963

Influence of the sol-gel synthesis on the formation of spinel MgAl2O4

964

Influence of the solid nature in the efficiency of an electrokinetic process Original Research Article

965

Influence of the Solid Particles Nanofluid on the Dynamic Behaviour of Rotor Fluid Film Journal Bearing Systems

966

Influence of the Solid Phase's Fractional Composition on the Filtration Characteristics of the Drilling Mud

967

Influence of the solid state properties of Pd/MOx (M = Ti, Al) catalysts in catalytic combustion of methane

968

Influence of the solid type on the adsorption mechanism of nonionic polymers in the metal oxide/water solution system—temperature effect

969

Influence of the solids content on the properties of waterborne polyurethane dispersions obtained with polycarbonate of hexanediol

970

Influence of the soliton in anharmonic molecular crystals with temperature on Mossbauer effect

971

Influence of the soluble organic fraction on the thermal behaviour, texture and surface chemistry of diesel exhaust soot Original Research Article

972

Influence of the solute hydrophobicity on the enantioselective adsorption of β-blockers on a cellulase protein used as the chiral selector

973

Influence of the solution pH on the interaction mechanisms between the molecules of the (R)- and (S)-enantiomers of a few β-receptor blocking agents and those of cellobiohydrolase I (CBH I)

974

Influence of the solvation process on solute adsorption in reversed phase liquid chromatography

975

Influence of the solvent and the end groups on the morphology of cross-linked amphiphilic poly(1,2-butadiene)-b-poly(ethylene oxide) nanoparticles

976

Influence of the solvent in anode catalyst ink on the performance of a direct methanol fuel cell

977

Influence of the solvent in low temperature glycosylations with O-(2,3,5,6-tetra-O-benzyl-β-d-galactofuranosyl) trichloroacetimidate for 1,2-cis α-d-galactofuranosylation Original Research Article

978

Influence of the solvent in the formation of different 1D and 2D coordination polymers from the reaction of copper(II) phthalate with pyrazole

979

Influence of the solvent on nature of gate effect in molecularly imprinted membrane Original Research Article

980

Influence of the solvent on the crystal structure of PCBM and the efficiency of MDMO-PPV:PCBM plastic solar cells

981

Influence of the solvent on the microencapsulation of an hydrated salt

982

Influence of the solvent on the microencapsulation of an hydrated salt

983

Influence of the solvent on the titanium beta catalyzed oxidation of phenylethylenes without carbon-carbon double bond cleavage Original Research Article

984

Influence of the solvent on ultrasonically produced SbSI nanowires

985

Influence of the solvent on ultrasonically produced SbSI nanowires

986

Influence of the solvent properties on the characteristics of a double layer capacitor

987

Influence of the solvent quality on the AhR mediated Procept® assay measurement of dioxin and dioxin-like compounds

988

Influence of the solvent viscosity on surface graft-polymerization reactions

989

INFLUENCE OF THE SORET EFFECT ON CONVECTION IN A BINARY FLUID LAYER WITH A FREE UPPER SURFACE

990

Influence of the Soret effect on the analytical signal in cw-laser thermal lens spectrometry of micellar solutions Original Research Article

991

Influence of the source and sink temperatures on the optimal refrigerant charge of a water-to-water heat pump

992

Influence of the source gas ratio on the hydrogen and deuterium content of a-C:H and a-C:D films: Plasma-enhanced CVD with CH4/H2, CH4/D2, CD4/H2 and CD4/D2

993

Influence of the Southeast Asian biomass burnings on the atmospheric persistent organic pollutants observed at near sources and receptor site

994

Influence of the South–North Water Diversion Project and the mitigation projects on the water quality of Han River

995

Influence of the soybean cyst nematode (Heterodera glycines) on the incidence of brown stem rot in soybean and adzuki bean

996

Influence of the soybean cyst nematode (Heterodera glycines) on the incidence of brown stem rot in soybean and adzuki bean

997

Influence of the spacecraft end-of-life re-orbiting altitude on the long-term collision risk in the geostationary ring Original Research Article

998

Influence of the spacer dielectric processes on PMOS junction properties

999

Influence of the spacer length on the activity of enzymes immobilised on nylon/polyGMA membranes: Part 1. Isothermal conditions

1000

Influence of the spacer length on the activity of enzymes immobilised on nylon/polyGMA membranes: Part 2: Non-isothermal conditions

بازگشت