<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Reliability analysis of multi-trigger binary systems subject to competing failures
2
Reliability analysis of multi-trigger binary systems subject to competing failures
3
RELIABILITY ANALYSIS OF MUX–DEMUX REPLICATED MULTISTAGE INTERCONNECTION NETWORKS
4
Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF
5
Reliability analysis of non-linear reinforced concrete frames using the response surface method
6
Reliability analysis of non-linear reinforced concrete frames using the response surface method
7
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach
8
Reliability analysis of nuclear component cooling water system using semi-Markov process model
9
RELIABILITY ANALYSIS OF OPTIMALLY DESIGNED DOUBLE LAYER BARREL VAULTS
10
Reliability analysis of pipelines carrying H2S for risk based inspection of heavy water plants
11
Reliability analysis of pipelines carrying H2S for risk based inspection of heavy water plants
12
Reliability analysis of plane elasticity problems by stochastic spline fictitious boundary element method
13
Reliability Analysis of Power System Considering Renewable Resources, CHP Units, Energy Storage Devices and Demand Response Program
14
Reliability analysis of prestressed concrete beams exposed to fire
15
Reliability analysis of prestressed concrete bridge girders: comparison of Eurocode, Spanish Norma IAP and AASHTO LRFD
16
Reliability analysis of projectile penetration into geological targets
17
Reliability analysis of projectile penetration into geological targets
18
Reliability analysis of randomly vibrating structures with parameter uncertainties
19
Reliability analysis of reinforced concrete grids with nonlinear material behavior
20
Reliability analysis of reinforced concrete grids with nonlinear material behavior
21
Reliability analysis of reinforced concrete slabs under explosive loading
22
Reliability analysis of repairable multi-state system with common bus performance sharing
23
Reliability analysis of repairable systems using Petri nets and vague Lambda-Tau methodology
24
Reliability analysis of repairable systems using system dynamics modeling and simulation
25
Reliability analysis of rock mass response by means of Random Set Theory
26
Reliability analysis of rock mass response by means of Random Set Theory
27
Reliability analysis of roof sheathing panels exposed to a hurricane wind
28
Reliability analysis of rotor blades of tidal stream turbines
29
Reliability analysis of rotor blades of tidal stream turbines
30
Reliability Analysis of Rotorcraft Composite Structures
31
Reliability analysis of safety grade decay heat removal system of Indian prototype fast breeder reactor
32
Reliability Analysis of Sequential Logic Circuits Using Signal Flow Graphs
33
Reliability analysis of shuffle-exchange network systems
34
Reliability analysis of shuffle-exchange network systems
35
Reliability analysis of shutdown system
36
Reliability analysis of soil–water characteristics curve and its application to slope stability analysis
37
Reliability analysis of solar photovoltaic system using hourly mean solar radiation data
38
Reliability analysis of spacecraft structures under static and dynamic loading
39
Reliability analysis of steel connection components based on FEM
40
Reliability analysis of stiffened tank-roof stability with multiple random variables using minimum distance and Lagrange methods
41
Reliability analysis of structures using artificial neural network based genetic algorithms Original Research Article
42
Reliability analysis of structures using neural network method
43
Reliability Analysis of Subsea Pipeline against Upheaval Buckling
44
Reliability Analysis of Surface Settlement caused by Mechanized Tunneling-a Case Study
45
Reliability analysis of suspension bridges against buffeting failure
46
Reliability Analysis of Suspension Bridges against Fatigue Failure from the Gusting of Wind
47
RELIABILITY ANALYSIS OF SUSPENSION BRIDGES AGAINST FLUTTER
48
Reliability Analysis of Switches and Crossings – A Case Study in Swedish Railway
49
Reliability analysis of Tension-Leg Platform Tendon with Respect to Fatigue Failure under Environmental Condition of Caspian Sea
50
Reliability Analysis of the Cayley Graphs of Dihedral Groups
51
Reliability analysis of the complex mode indicator function and Hilbert Transform techniques for operational modal analysis
52
Reliability Analysis of the Joint LDPC Decoding Algorithms over the Multiple Access Channels
53
Reliability analysis of the metal forming process
54
Reliability Analysis of the Sum-Product Decoding Algorithm for the PSK Modulation Scheme
55
Reliability analysis of the Wadi Al-Arish surface water supply system on the Sinai Peninsula, Egypt
56
Reliability analysis of three elements in series and parallel systems under timevarying fuzzy failure rate
57
Reliability analysis of three-component mixture of distributions
58
Reliability analysis of TLP tethers under impulsive loading
59
Reliability analysis of TLP tethers under impulsive loading
60
Reliability analysis of traffic noise estimates in Hong Kong
61
Reliability analysis of TSG19-type pantograph based on time-dependent parameters
62
Reliability analysis of two dissimilar parallel unit repairable system with failure during preventive maintenance
63
Reliability analysis of two unit parallel repairable industrial system
64
Reliability analysis of uncertain dynamical systems using correlated function expansion
65
Reliability analysis of uncertain dynamical systems using correlated function expansion
66
Reliability analysis of wastewater treatment plants
67
Reliability analysis of water distribution systems under uncertainty
68
Reliability analysis of wind-excited structures
69
Reliability analysis using an additive Weibull model with bathtub-shaped failure rate function
70
Reliability analysis using object-oriented constrained optimization
71
Reliability Analysis with Multiple Dependent Features from a Vibration-Based Accelerated Degradation Test
72
Reliability analysis with nondestructive inspection
73
Reliability analysis with scarce information: Comparing alternative approaches in a geotechnical engineering context
74
Reliability analysis with triangular hesitant fuzzy pareto life distribution
75
Reliability Analysis, Modeling and Simulation of Optical Transmission Network (Case study: railway optical telecommunication)
76
Reliability analysis—a review and some perspectives
77
Reliability and acceptability of the multiple mini-interview for selection of residents in cardiology
78
Reliability and acceptability of the multiple mini-interviews for selection of residents in cardiology: Student response
79
Reliability and Accountability of Digital Information Through Time
80
Reliability and accuracy of different sensors of a flexible electrogoniometer
81
RELIABILITY AND ACCURACY OF JOINT POSITION SENSE MEASUREMENT IN THE LABORATORY AND CLINIC; UTILISING A NEW SYSTEM
82
Reliability and accuracy of templating the proximal humeral component for shoulder arthroplasty
83
Reliability and accuracy of three-dimensional computed tomography in predicting on-track and off-track lesions
84
Reliability and agreement between 2 strength devices used in the newly modified and standardized Constant score
85
Reliability and availability analysis of dependent–dynamic systems with DRBDs
86
Reliability and availability analysis of dependent–dynamic systems with DRBDs
87
Reliability and availability analysis of low power portable direct methanol fuel cells
88
Reliability and availability assessment of electrical and mechanical systems
89
Reliability and availability assessment of reverse osmosis
90
Reliability and Availability Improvement in Economic Data Grid Environment Based On Clustering Approach (RAG)
91
Reliability and availability of the Internet of things
92
Reliability and clinical application of fetal RhD genotyping with two different fluorescent duplex polymerase chain reaction assays: Three years’ experience,
93
Reliability and Clinical Validity of the Italian Reflux Symptom Index
94
Reliability and clinical validity of UM-CIDI DSM-III-R generalized anxiety disorder
95
Reliability and Coefficient of Kappa Value of Municipal Solid Waste Management Criteria for Land Use Planning in Malaysia
96
Reliability and comparison of electromyographic and kinetic measurements during a standing reach task in children with and without cerebral palsy
97
Reliability and component structure of the modified Daily Symptom Report (DSR-20)
98
Reliability and concurrent validation of the IPIP Big-Five factor markers in China: Consistencies in factor structure between Internet-obtained heterosexual and homosexual samples
99
Reliability and congestion control in cognitive radio sensor networks
100
Reliability and construct validity of the Automated Neuropsychological Assessment Metrics (ANAM) mood scale
101
Reliability and construct validity of the German version of Cloningerʹs Tridimensional Personality Questionnaire
102
Reliability and Construct Validity of the Iranian Version of Health-promoting Lifestyle Profile in a Female Adolescent Population
103
Reliability and Convergent Validity of Digital Photography in Assessing Postural Orientation of Children with Cerebral Palsy: A Methodological Study
104
RELIABILITY AND CORRELATION OF MULTIMEDIA ELEMENT AND TABLET INTERFACE IN DIGITAL STORYTELLING
105
Reliability and cost analyses of electricity collection systems of a marine current farm—A Taiwanese case study
106
Reliability and Cost Analysis of Sachet Water Plant Using Copula Approach
107
Reliability and cost assessment of power transmission networks in the competitive electrical energy market
108
Reliability and cost optimization in distributed computing systems
109
Reliability and Cost Optimization of a System with k-out-of-n Configuration and Choice of Decreasing the Components Failure Rates
110
Reliability and cost optimization of electronic devices considering the component failure rate uncertainty
111
Reliability and cost optimization of electronic devices considering the component failure rate uncertainty
112
Reliability and Cost Optimization of Multi-Input Bidirectional DC/DC Converter Implemented in Renewable Sources
113
Reliability and Cost Optimization of Multi-input Bidirectional DC/DC Converter Implemented in Renewable Sources
114
Reliability and cost–benefits of adding alternate power sources to an independent micro-grid community
115
Reliability and Cost-Benet Analysis of a System Comprising One Big Unit and Two Small Identical Units with Priority for Operation/Repair to Big Unit
116
Reliability and costs optimization for distribution networks expansion using an evolutionary algorithm
117
Reliability and decomposition techniques to solve certain class of stochastic programming problems
118
Reliability and decomposition techniques to solve certain class of stochastic programming problems
119
Reliability and diagnostic accuracy of neuropsychological assessments using low-bandwidth telemedicine technologies
120
Reliability and economic analysis of a power generation system including a photovoltaic system
121
Reliability and effectiveness of LiNbO3 ferroelectric films sputtered on ITO-based conductive electrode
122
Reliability and efficiency of an anisotropic Zienkiewicz–Zhu error estimator Original Research Article
123
Reliability and expectation bounds for coherent systems with exchangeable components
124
Reliability and Factorial Structure of the Farsi Version of the Arabic Scale of Death Anxiety in an Iranian Middle-Aged Sample
125
Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques
126
Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques
127
Reliability and flexural behavior of triangular and T-reinforced concrete beams
128
Reliability and heterogeneity of railway services
129
Reliability and Human Factors in Geotechnical Engineering
130
Reliability and input-data induced uncertainty of the EPIC model to estimate climate change impact on sorghum yields in the U.S. Great Plains
131
Reliability and life cycle cost estimates of 400 kV substation layouts
132
Reliability and life study of hydraulic solenoid valve. Part 1: A multi-physics finite element model
133
Reliability and life study of hydraulic solenoid valve. Part 2: Experimental study
134
Reliability and lifetime evaluation of different wire bonding technologies for high power IGBT modules
135
Reliability and lifetime evaluation of different wire bonding technologies for high power IGBT modules
136
Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates
137
Reliability and limitations of Impact-Echo Method for Thickness Measurement of Orthotropic Composite Plates
138
Reliability and magnitude of laterality effects in dichotic listening with exogenous cueing
139
Reliability and maintainability analysis of cheese (feta) production line in a Greek medium-size company: A case study Original Research Article
140
Reliability and maintainability analysis of strudel production line with experimental data – A case study Original Research Article
141
Reliability and mechanical design
142
Reliability and performance analysis for fault-tolerant programs consisting of versions with different characteristics
143
Reliability and performance analysis for fault-tolerant programs consisting of versions with different characteristics
144
Reliability and performance analysis of hardware–software systems with fault-tolerant software components
145
Reliability and performance analysis of hardware–software systems with fault-tolerant software components
146
Reliability and performance evaluation of fault-aware routing methods for network-on-chip architectures
147
Reliability and performance of multi-state systems with propagated failures having selective effect
148
Reliability and performance of multi-state systems with propagated failures having selective effect
149
Reliability and performance of primary lithium batteries for ultrasonic gas meters
150
Reliability and performance-based design
151
Reliability and performance-based design: a computational approach and applications
152
Reliability and plasticity of response inhibition and interference control
153
Reliability and practicability of bacteriological monitoring of beef carcass contamination and their rating within a hygiene quality control programme of abattoirs
154
Reliability and predictive validity of the Food Technology Neophobia Scale
155
Reliability and production assessment of wind energy production connected to the electric network supply
156
Reliability and properties of core materials for all-ceramic dental restorations
157
Reliability and Quantile Analysis of the Weibull Distribution
158
Reliability and Recalibration of the Persian Version of Cumberland Ankle Instability Tool Cut-off Score in Athletes with Functional Ankle Instability
159
Reliability and redundancy assessment of ships under different operational conditions
160
Reliability and relative validity of an FFQ for nutrients in the Tehran Lipid and Glucose Study
161
Reliability and Relative Validity of Fish Consumption Data Obtained in an Exposure Assessment Study among Montreal-Area Sportfishers
162
Reliability and reproducibility of classifications for distal radius fractures
163
Reliability and Reproducibility of Linear Measurements of Alveolar Ridges Using Cone-beam CT Made by Radiologists and Periodontists
164
Reliability and reproducibility of perfusion MRI in cognitively normal subjects
165
Reliability and reproducibility of radiographic interpretation of proximal humeral fracture pathoanatomy
166
Reliability and Reproducibility of the International Caries Detection and Assessment System Index in Evaluation of Dental Decay in People Aged 25-40 Years
167
Reliability and reserve in competitive electricity market scheduling
168
Reliability and risk analysis data base development: an historical perspective
169
Reliability and risk analysis of large systems with ageing components
170
Reliability and risk analysis of large systems with ageing components
171
Reliability and Risk Assessment of Electric Cable Shovel at Chadormalu Iron Ore Mine in Iran
172
Reliability and Risk: A Bayesian Perspective, Nozer Sinpurwalla Wiley, New York (2006). US $130, 371pp.,
173
Reliability and safety analysis of fault tolerant and fail safe node for use in a railway signalling system
174
Reliability and safety analysis of redundant vehicle management computer system
175
Reliability and scale effect in toughness of concrete structures
176
Reliability and Security Constrained Unit Commitment With Hybrid Optimization Method
177
Reliability and security: the NERC new standards development process
178
Reliability and Sensitivity Analysis of a Batch Arrival Retrial Queue with k-Phase Services, Feedback, Vacation, Delay, Repair and Admission
179
Reliability and sensitivity analysis of a system with multiple unreliable service stations and standby switching failures
180
Reliability and Sensitivity Analysis of Single-Layer Space Domes
181
Reliability and Sensitivity Analysis of Structures Using Adaptive Neuro-Fuzzy Systems
182
Reliability and Sensitivity Analysis of Transonic Flutter Using Improved Line Sampling Technique
183
Reliability and Supply Security based Method for Simultaneous Placement of Sectionalizer Switch and DER Units
184
Reliability and the value of information
185
Reliability and thermodynamic studies of an anisotropic conductive adhesive film (ACAF) prepared from epoxy/rubber resins
186
Reliability and Uncertainty Determination of a Combined Heat and Power in Microgrid Systems
187
Reliability and validity
188
Reliability and validity analysis in the field of medical and paramedical research; Common mistakes
189
Reliability and Validity Analysis of Statistical Reasoning Test Survey Instrument using the Rasch Measurement Model
190
Reliability and validity assessment of a glenoid bone loss measurement using the Bernageau profile view in chronic anterior shoulder instability
191
Reliability and Validity Assessment of Mizaj Questionnaire: A Novel Self-report Scale in Iranian Traditional Medicine
192
Reliability and Validity Assessment of the Persian Version of the Noise Exposure Questionnaire (NEQ): An NIHL Predictor Tool
193
Reliability and Validity for Measuring Active Hip Rotation with the Clinometer Smartphone Application™
194
Reliability and validity issues of laser fluorescence measurements in occlusal caries diagnosis
195
Reliability and Validity Measurement ofSagittal Lumbosacral Quiet Standing Posture witha Smartphone Application in a Mixed Population of183 College Students and Personnel
196
Reliability and Validity of “Teachers’ Collaboration Level Determinatıon Scale”
197
Reliability and validity of a brief measure of sensation seeking
198
Reliability and validity of a Chinese version of the Quality of Life in Epilepsy Inventory (QOLIE-89)
199
Reliability and Validity of a Chinese Version of the Stroke Action Test: A New Instrument for Assessment of Stroke Knowledge and Response
200
Reliability and Validity of a Chinese Version of the Stroke Action Test: A New Instrument for Assessment of Stroke Knowledge and Response
201
Reliability and validity of a computer-based knowledge mapping system to measure content understanding
202
Reliability and validity of a computerized neurocognitive test battery, CNS Vital Signs
203
Reliability and Validity of a Culturally Adaptive Version of the International Physical Activity Questionnaire in Indian Subcontinent: A Cross‑sectional Study
204
Reliability and validity of a field hockey skill test
205
Reliability and validity of a Malay-versionquestionnaire assessing knowledge of breastfeeding
206
Reliability and validity of a measure of sexual and physical abuse histories among women with serious mental illness
207
Reliability and validity of a newly developed test of physical work performance : D. E. Lechner, J. R. Jackson, D. L. Roth and K. V. Straaton, Journal of Occupational Medicine, 36(9), 997
208
Reliability and validity of a non-verbal measure of the speed and efficiency of long-term memory retrieval
209
Reliability and Validity of A Persian Version of Substance Dependence Severity Scale (SDSS)
210
Reliability and Validity of a Safety Climate Questionnaire
211
Reliability and validity of a scale to measure consumer attitudes regarding the private food safety certification of restaurants
212
Reliability and validity of a self-efficacy instrument specific to sickle cell disease
213
Reliability and validity of a visual analog scale for acute abdominal pain in the ED
214
Reliability and validity of an activity monitor (IDEEA) in the determination of temporal–spatial gait parameters in individuals with cerebral palsy
215
Reliability and validity of an activity monitor (IDEEA®) in a paediatric population
216
Reliability and Validity of an Adapted Questionnaire Assessing Occupational Exposures to Hazardous Chemicals among Health Care Workers in Bhutan
217
Reliability and validity of Azeri Turkish version of geriatric depression scale
218
Reliability and Validity of Bedside Version of Persian WAB (P-WAB-1)
219
Reliability and Validity of Dental Measurements Made on Digital and Stone Orthodontic Models
220
Reliability and validity of destination-specific barriers to walking and cycling for youth
221
Reliability and validity of dyspnea sensory quality descriptors in heart failure patients treated in an emergency department
222
Reliability and validity of egocentered network data collected via web: A meta-analysis of multilevel multitrait multimethod studies
223
Reliability and Validity of Ethiopian Amharic Version of the PedsQLTM 4.0 Generic Core Scales and PedsQLTM 3.0 Diabetes Module
224
Reliability and Validity of Fall Behavioral Scale for Older People
225
Reliability and validity of first metatarsophalangeal joint orientation measured with an electromagnetic tracking device
226
Reliability and validity of Heimʹs AH4 in Greece
227
Reliability and Validity of Iranian Slim Guide Skinfold Caliper to Measure Subcutaneous Fat
228
Reliability and Validity of Kurdish Language Version of Health Promoting Lifestyle Profile II among Kurdish Healthcare Providers Kurdish Version of HPLP-II
229
Reliability and Validity of Malay Language Version of International Physical Activity Questionnaire (IPAQ-M) among the Malaysian Cohort Participants
230
Reliability and validity of measures of anger/hostility in singapore: Cook &Medley Ho Scale, STAXI and Buss-Durkee hostility inventory
231
Reliability and Validity of Nutritional Changes Processes Scale
232
Reliability and Validity of Objective Structured Clinical Examination for Residents of Obstetrics and Gynecology at Kermanshah University of Medical Sciences
233
Reliability and Validity of Observational Methods for Postural Load Assessment: An Updated Systematic Review
234
Reliability and Validity of Organizational Trust Scale in Nursing
235
reliability and validity of osce in evaluating clinical skills of nursing students
236
Reliability and validity of performance measures in microworlds
237
Reliability and Validity of Persian Translation of Morisky Medication Adherence Scale (4-Item Version) in Asthmatic Patients
238
Reliability and Validity of Persian Version of Job Content Questionnaire in Health Care Workers In Iran
239
Reliability and validity of Persian version of mentalization scale in university students
240
Reliability and Validity of Persian Version of Perceived Stress Scale (PSS-10) in Adults with Asthma
241
Reliability and Validity of Persian Version of Performance-oriented Mobility Assessment (POMA) in Community-dwelling Iranian Older Adults: Psychometric Properties
242
Reliability and Validity of Persian Version of World Health Organization Health and Work Performance Questionnaire in Iranian Health Care Workers
243
Reliability and Validity of Place Attachment Scale among Iranian Older Adults
244
Reliability and validity of pressure ulcer diagnosis and grading: An image-based survey
245
Reliability and validity of query intent assessments
246
Reliability and Validity of Recreational Fishing Motivation Scale in Turkish Population
247
Reliability and validity of risk analysis
248
Reliability and validity of risk analysis
249
Reliability and Validity of Rorschach Aggression Variables With a Sample of Adjudicated Adolescents
250
Reliability and Validity of Sedentary Behavior Questionnaire in Turkish Population: Evaluation of Psychometric Properties
251
Reliability and validity of self-report data of homeless mentally ill individuals
252
Reliability and validity of self-reported assessment of exposure and outcome variables for manual lifting tasks: a preliminary investigation
253
Reliability and Validity of Self-Reported Male Balding Patterns for Use in Epidemiologic Studies
254
Reliability and validity of servqual scores used to evaluate perceptions of library service quality
255
Reliability and Validity of Short Food Frequency Questionnaire Among Pregnant Females
256
Reliability and validity of temperament scales of the NLSY child assessments
257
Reliability and validity of TEMPS-A in a Japanese non-clinical population: application to unipolar and bipolar depressives
258
Reliability and Validity of the ‘‘Personal Well-Being Index- Cognitive Disability’’ on Mentally Retarded Students
259
Reliability and Validity of the “Personal Well-Being Index – Adult” in Mothers of Mentally Retarded Students in North of Tehran-Iran
260
Reliability and validity of the Adult Learning Inventory among medical students
261
Reliability and validity of the Arabic version of the Psoriasis Disability Index questionnaire
262
Reliability and validity of the assessment of depression in general practice: the short depression interview (SDI)
263
Reliability and validity of the beck depression inventory-fast screen for medical patients in the general German population
264
Reliability and validity of the behavioural assessment scale
265
Reliability and Validity of the Bipolar Depression Rating Scale on an Iranian Sample
266
Reliability and Validity of the Championʹʹs Health Belief Model Scale for Mammography among Iranian Women with Family History of Breast Cancer
267
Reliability and validity of the Child Behavior Checklist Obsessive-Compulsive Scale
268
Reliability and Validity of the Chinese Version of the Mood Disorder Questionnaire
269
Reliability and Validity of the Chinese Version of the Perceived Access to Health Care Questionnaire
270
Reliability and validity of the cocaine selective severity assessment
271
Reliability and validity of the compliance belief scales among patients with heart failure
272
Reliability and Validity of the Critical Care Family Needs Inventory in a Dutch-speaking Belgian sample
273
Reliability and validity of the Danish version of the UCLA Loneliness Scale
274
Reliability and validity of the DSM-IV diagnostic category of schizoaffective disorder: Preliminary data
275
Reliability and validity of the Edinburgh Visual Gait Score for cerebral palsy when used by inexperienced observers
276
Reliability and validity of the Exercise Self-Regulatory Efficacy Scale for individuals with chronic obstructive pulmonary disease
277
Reliability and validity of the Faces Pain Scale with older adults
278
Reliability and Validity of the Fagerstrom Test for Cigarettes Dependence among Malaysian Adolescents
279
Reliability and Validity of the Farsi Version of the Somatosensory Amplification Scale
280
Reliability and validity of the German short version of the Activities specific Balance Confidence (ABC-D6) scale in older adults
281
Reliability and validity of the Health Outcomes Burn Questionnaire for infants and children in The Netherlands
282
Reliability and validity of the Hospital Anxiety and Depression Scale and the Beck Depression Inventory (Full and FastScreen scales) in detecting depression in persons with hepatitis C
283
Reliability and validity of the Icelandic version of the problem area in diabetes (PAID) scale
284
Reliability and Validity of the Iranian Version of Nijmegen Questionnaire in Iranians with Asthma
285
Reliability and Validity of the Iranian Version of Nijmegen Questionnaire in Iranians with Asthma
286
Reliability and validity of the Korean version of the Minnesota Living with Heart Failure Questionnaire
287
Reliability and validity of the Metrecom Skeletal Analysis System in the assessment of sagittal plane lumbar angles
288
Reliability and Validity of the Modifiable Activity Questionnaire (MAQ) in an Iranian Urban Adult Population
289
Reliability and Validity of the Modifiable Activity Questionnaire for an Iranian Urban Adolescent Population
290
reliability and validity of the objective structured clinical examination in the evaluation of clinical skills of midwifery students (kashan, 2014)
291
Reliability and Validity of the Objective Structured Clinical Examination in the Evaluation of Clinical Skills of Midwifery Students (Kashan, 2014)
292
Reliability and validity of the Padua Inventory in an Iranian population
293
Reliability and validity of the pain observation scale for young children and the visual analogue scale in children with burns
294
Reliability and validity of the Panic Disorder Severity Scale: replication and extension
295
RELIABILITY AND VALIDITY OF THE PARENTAL CONTROL SCALE A Meta-Analysis of Cross-Cultural and Intracultural Studies
296
Reliability and Validity of the Persian Version of Reasons for Death Fear Scale
297
Reliability and validity of the Persian (Farsi) version of the Risk Perception Survey–Diabetes Mellitus
298
Reliability and Validity of the Persian Language Version of the Female Lower Urinary Tract Symptoms’ Long form Questionnaire
299
Reliability and Validity of the Persian Version Emotional Self-efficacy Scale for Young Adolescents
300
Reliability and Validity of the Persian Version of Amphetamine Cessation Symptom Assessment (ACSA) Questionnaire in Iran
301
Reliability and Validity of the Persian Version of Child Asthma Self-Efficacy Scale
302
Reliability and Validity of the Persian Version of Compulsive Eating Scale (CES) in Overweight or Obese Women and its Relationship with Some Body Composition and Dietary Intake Variables
303
Reliability and Validity of the Persian Version of Dental Student Learning Education Questionnaire and a Researcher Made Questionnaire about In-terest of Dental Students in Their Field of Study
304
Reliability and Validity of the Persian Version of Distress Tolerance Scale
305
Reliability and validity of the persian version of distress tolerance scale.
306
Reliability and validity of the Persian version of patient assessment of constipation- quality of life (PAC-QOL) questionnaire
307
Reliability and Validity of the Persian Version of Quality of Life Impact of Refractive Correction Questionnaire
308
Reliability and Validity of the Persian Version of Templer Death Anxiety Scale-Extended in Veterans of Iran–Iraq Warfare
309
Reliability and Validity of the Persian Version of the Body Image Disturbance Questionnaire-Scoliosis in Patients with Adolescent Idiopathic Scoliosis Who Did Not Have Surgical Indication
310
Reliability and Validity of the Persian Version of the Foot Function Index in Patients with Foot Disorders
311
Reliability and Validity of the Persian Version of the General Oral Health Assessment Index (GOHAI)
312
Reliability and Validity of the Persian Version of the Healthy Lifestyle Scale for University Students
313
Reliability and Validity of the Persian Version of the Professional Self Identity Questionnaire (PSIQ) in Iranian Students in Shiraz
314
Reliability and Validity of the Persian Version of the World Health Organization-Five Well-Being Index
315
Reliability and Validity of the Physical Activity Questionnaire for Older Children (PAQ-C) In Malay Language
316
Reliability and validity of the psychopathy checklist: Youth version in a UK sample of conduct disordered boys
317
Reliability and validity of the Psychopathy Checklist: Youth Version in Dutch female adolescents
318
Reliability and validity of the RBANS in a traumatic brain injured sample
319
Reliability and validity of the Retrospective Childhood and Current Adult Fear Survey (RCCAFS)
320
Reliability and validity of the Revised Iowa Dental Control Index in a non-clinical sample
321
Reliability and Validity of the Reynolds Adolescent Depression Scale with Young Adolescents
322
Reliability and Validity of the Scale of Knowledge and Behaviors Related To Food Additives
323
Reliability and Validity of the Self-Efficacy Expectations and Outcome Expectations After Implantable Cardioverter Defibrillator Implantation Scales
324
Reliability and Validity of the Short Schema Mode Inventory (SMI)
325
Reliability and Validity of the Social Cognition and Object Relations Scale (SCORS) in the Assessment of Dream Narratives
326
Reliability and validity of the Spence Childrenʹs Anxiety Scale and the Screen for Child Anxiety Related Emotional Disorders in German children
327
Reliability and Validity of the Swiss Spinal Stenosis Questionnaire for Iranian Patients with Lumbar Spinal Stenosis
328
Reliability and Validity of the Tampa Scale of Kinesiophobia Questionnaire in Individuals with Non-specific Low Back Pain
329
Reliability and validity of the Tibetan medicine constitution scale: a cross-sectional study of the general population in Beijing, China
330
Reliability and Validity of the TONI-3 Intelligence Test in Gifted Children
331
Reliability and validity of the Turkish form of the eight-item Morisky medication adherence scale in hypertensive patients
332
Reliability and Validity of the Turkish Language Version of the Test of Performance Strategies
333
Reliability and validity of the Turkish version of the CDC HRQOL-4 scale in patients with chronic low back pain
334
Reliability and validity of the Turkish version of the Falls Efficacy Scale International (FES-I) in community-dwelling older persons
335
Reliability and validity of the Visual Gait Assessment Scale for children with hemiplegic cerebral palsy when used by experienced and inexperienced observers
336
Reliability and validity of the Yale-Brown Obsessive-Compulsive Scale
337
Reliability and validity of Turkish version of clinical stress questionnaire
338
Reliability and Validity of Turkish Version of the Nurses Professional Values Scale – Revised
339
Reliability and validity of two Likert versions of the Schizotypal Personality Questionnaire (SPQ)
340
Reliability and validity of two widely-used worry questionnaires: self-report and self-peer convergence
341
Reliability and Validity of WDCT in Testing Interlanguage Pragmatic Competence for EFL Learners
342
reliability and validity of wechsler intelligence scale for childrenthird edition (wisc-iii) in iran
343
Reliability and validity of Womens Health Initiative Insomnia Rating Scale.
344
Reliability and validity studies of four tests of malingering
345
Reliability and validity study of the preschool social behavior scale - teacher form
346
RELIABILITY AND VALIDITY STUDY OF THE TURKISH VERSION OF PARENT-INITIATED MOTIVATIONAL CLIMATE QUESTIONNAIRE
347
Reliability and Validity Work of Conflict Resolution Skill Scale
348
Reliability and vulnerability analyses of critical infrastructures: Comparing two approaches in the context of power systems
349
Reliability and vulnerability analyses of critical infrastructures: Comparing two approaches in the context of power systems
350
Reliability approximation using finite Weibull mixture distributions
351
Reliability approximation using finite Weibull mixture distributions
352
Reliability as Tool for Hydraulic Network Planning
353
Reliability as Tool for Hydraulic Network Planning
354
Reliability aspects of tribology
355
Reliability assessment and design load factors for reinforced concrete containment structures
356
Reliability assessment and failure analysis of lithium iron phosphate batteries
357
Reliability Assessment and Thermal Consideration of a Step-down DC/DC Converter
358
Reliability assessment based on degradation measurements: How to compare some models?
359
Reliability assessment by analytical calculation of the plastic collapse load of thin pressure vessels with strain hardening and large deformation
360
Reliability assessment for sheet metal forming operations Original Research Article
361
Reliability assessment for ultimate longitudinal strength of ship hulls in composite materials
362
Reliability assessment in advanced nanocomposite materials for orthopaedic applications
363
Reliability assessment in electrical power systems: the Weibull-Markov stochastic model
364
Reliability assessment in structural dynamics
365
Reliability Assessment of a Fixed Jacket Platform by Monte Carlo Simulation Using Neural Network
366
Reliability Assessment of a Gas Generating Station in Ogun State, Nigeria
367
Reliability Assessment of a Restructured Power System Considering the Reserve Agreements
368
Reliability assessment of a restructured power system using reliability network equivalent techniques
369
Reliability assessment of a steel plate subjected to distributed and localized corrosion wastage
370
Reliability assessment of an automated distribution system
371
Reliability Assessment of Arthroscopic Findings Versus MRI in ACL Injuries of the Knee
372
Reliability assessment of autonomous power systems incorporating HVDC interconnection links
373
Reliability Assessment of CFRPStrengthened Deficient Steel SHS Columns
374
Reliability assessment of complex mechatronic systems using a modified nonparametric belief propagation algorithm
375
Reliability assessment of complex mechatronic systems using a modified nonparametric belief propagation algorithm
376
Reliability Assessment of Conventional Three-Level Inverters for Use in Hybrid Unmanned Aerial Vehicles
377
Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits
378
Reliability assessment of delamination in chip-to-chip bonded MEMS packaging
379
Reliability Assessment of Distribution Systems in Presence of Microgrids Considering Uncertainty in Generation and Load Demand
380
Reliability Assessment of Distribution Transformers Considering Load Harmonics
381
Reliability Assessment of Dynamic Soil Properties
382
Reliability assessment of embedded digital system using multi-state function
383
Reliability assessment of embedded digital system using multi-state function
384
Reliability assessment of generation and transmission systems using fault-tree analysis
385
Reliability assessment of groundwater monitoring networks at landfill sites
386
Reliability assessment of high cycle fatigue under variable amplitude loading: Review and solutions
387
Reliability assessment of indium solder for low temperature electronic packaging Original Research Article
388
Reliability assessment of infinite slope stability using the jointly distributed random variables method
389
Reliability assessment of locking systems
390
Reliability assessment of maintained ship hulls with correlated corroded elements
391
Reliability assessment of Needle Penetration Index for estimating compressive strength of some sedimentary rocks from the Qom Formation, Central Iran
392
Reliability Assessment of Offshore Pipeline Due to Pitting Corrosion
393
Reliability Assessment of Optical p-Cycles
394
Reliability Assessment of Orthodontic Apps for Cephalometrics
395
Reliability assessment of Passive Containment Cooling System of an Advanced Reactor using APSRA methodology
396
Reliability assessment of passive containment isolation system using APSRA methodology
397
Reliability assessment of passive isolation condenser system of AHWR using APSRA methodology
398
Reliability assessment of passive isolation condenser system of AHWR using APSRA methodology
399
Reliability assessment of photovoltaic power systems: Review of current status and future perspectives
400
Reliability assessment of post-buckling compressive strength of laminated composite plates and stiffened panels under axial compression
401
Reliability assessment of power distribution systems using disjoint path-set algorithm
402
Reliability Assessment of Power Generation Systems in Presence of Wind Farms Using Fuzzy Logic Method
403
Reliability assessment of pultruded FRP reinforcements with embedded fiber optic sensors
404
Reliability Assessment of Reinforced Concrete Walls Degraded by Aggressive Operating Environments
405
Reliability assessment of reliquefaction systems on LNG carriers
406
Reliability assessment of reliquefaction systems on LNG carriers
407
Reliability assessment of restructured power systems using reliability network equivalent and pseudo-sequential simulation techniques
408
Reliability Assessment of Shallow Domes Using a Semi-Empirical Evaluation Procedure
409
Reliability assessment of ship structures using Bayesian updating
410
Reliability assessment of silicone coated silicon concentrator solar cells by accelerated aging tests for immersing in de-ionized water
411
Reliability assessment of steel scaffold shoring structures for concrete formwork
412
Reliability assessment of structure subjected to horizontal-vertical random earthquake excitations
413
RELIABILITY ASSESSMENT OF STRUCTURES BY MONTE CARLO SIMULATION AND NEURAL NETWORKS
414
Reliability assessment of tension leg platform tethers under nonlinearly coupled loading
415
Reliability assessment of the attitude towards computers instrument (ATCI)
416
RELIABILITY ASSESSMENT OF TRANSMISSION LINE TOWERS USING METAHEURISTIC ALGORITHMS
417
Reliability assessment of ultra-thin HfO2 films deposited on silicon wafer
418
Reliability assessment on natural gas pressure reduction stations using Monte Carlo simulation (MCS)
419
Reliability assessment to determine the optimal forced outage rate of components
420
Reliability Assessments of Infant Incubator and the Analyzer
421
Reliability Assurance of Subsea Production Systems: A Systems Engineering Framework
422
Reliability Availability Maintainability Dependability Analysis of Mirrored Distributed System
423
Reliability based analysis of the crosswind stability of railway vehicles
424
Reliability Based Assessment of Existing Fixed Offshore Platforms Located in the Persian Gulf
425
Reliability Based Assessment of Existing Fixed Offshore Platforms Located in the Persian Gulf
426
Reliability based assessment of reinforced concrete columns under eccenric loads using refined first-order reliability method
427
Reliability based assessment of the effectiveness of metallic dampers in buildings under seismic excitations
428
Reliability based asset assessment in electrical distribution systems
429
Reliability based asset assessment in electrical distribution systems
430
Reliability based bridging of the gap between system’s safety factors associated with different failure modes
431
Reliability based budgeting with the case study of TV broadcast
432
Reliability based design of driven pile groups using combination of pile driving equations and high strain dynamic pile monitoring
433
Reliability based inspection of nickel-based alloy welds in boiling water reactor environment
434
Reliability based inspection of nickel-based alloy welds in boiling water reactor environment
435
Reliability based inspection planning of offshore structures
436
Reliability based maintenance and human resources work-rest scheduling in manufacturing system
437
Reliability based multi-objective robust design optimization of steel moment resisting frame considering spatial variability of connection parameters
438
RELIABILITY BASED OPTIMIZATION OF 3D STEEL MOMENT FRAMES CONSIDERING AXIAL FORCE and BIAXIAL BENDING MOMENTS INTERACTION
439
Reliability Based Optimization of Composite Laminates for Frequency Constraint
440
Reliability based optimization of laminated composite structures using genetic algorithms and Artificial Neural Networks
441
Reliability based optimum design of Tuned Mass Damper in seismic vibration control of structures with bounded uncertain parameters
442
Reliability based risk index for the design of reinforced earth structures
443
Reliability based robust design optimization for tuned mass damper in passive vibration control of deterministic/uncertain structures
444
Reliability based socio economic optimal renewable energy model for India
445
Reliability benefit analysis of adding WTG to a distribution system
446
Reliability bounds for coherent structures with independent components
447
Reliability bounds for multistage structures with independent components
448
Reliability bounds for the stress-strength model
449
Reliability bounds on HNBUE life distributions with known first two moments
450
Reliability bounds through random sets: Non-parametric methods and geotechnical applications
451
Reliability by design in distributed power transmission networks
452
Reliability calculation of MV-distribution networks with regard to ageing in XLPE-insulated cables
453
Reliability calculation under seasonally varying failure rate
454
Reliability centered economic dispatch in concept of energy hub considering resource diversity constraint
455
Reliability centered maintenance
456
Reliability centered maintenance for transmission systems
457
Reliability certification of programmable electronic systems
458
Reliability characteristics of components and systems with tolerable repair times
459
Reliability characteristics of GaAs and InP-based heterojunction bipolar transistors
460
Reliability characteristics of GaAs and InP-based heterojunction bipolar transistors
461
Reliability comparison of BTEL and bilayer organic LEDs
462
Reliability comparison of substation designs
463
Reliability Concept as a Trend in Biophysics of Aging
464
Reliability concepts applied to cutting tool change time
465
Reliability concepts applied to cutting tool change time
466
Reliability conditions in quadrature algorithms Original Research Article
467
Reliability confidence intervals for ceramic components as obtained from bootstrap methods and neural networks
468
Reliability consideration for fatigue design of sign, luminaire, and traffic signal support structures under wind load
469
Reliability consideration of a mobile communication system with network congestion
470
Reliability considerations for the BioMEMS designer
471
Reliability considerations of III-nitride microelectronic
472
Reliability considerations of III-nitride microelectronic
473
Reliability considerations of multifunction protection
474
Reliability considerations of NDT by probability of detection (POD) determination using ultrasound phased array
475
Reliability Constrained Energy and Reserve Scheduling of Microgrids Including High Penetration of Renewable Resources
476
Reliability constrained generation expansion planning with consideration of wind farms uncertainties in deregulated electricity market
477
Reliability constrained routing in QoS networks
478
Reliability cost/worth assessment of distribution systems incorporating time-varying weather conditions and restoration resources
479
Reliability curve fitting for aging helicopter components
480
Reliability demonstration test planning: A three dimensional consideration
481
Reliability demonstration test planning: A three dimensional consideration
482
Reliability design and case study of a refrigerator compressor subjected to repetitive loads
483
Reliability design and case study of refrigerator parts subjected to repetitive loads under consumer usage conditions
484
Reliability design methodology for confined high pressure inflatable structures
485
Reliability design of a reciprocating compressor suction reed valve in a common refrigerator subjected to repetitive pressure loads
486
Reliability design of distribution systems using modified genetic algorithms
487
Reliability design of residential sized refrigerators subjected to repetitive random vibration loads during rail transport
488
Reliability design of structural system with cost effectiveness during life cycle
489
Reliability design optimization of composite structures based on PSO together with FEA
490
Reliability economies of scale for tropical island electric power
491
Reliability effects of test strategies on safety-instrumented systems in different demand modes
492
Reliability effects of test strategies on safety-instrumented systems in different demand modes
493
Reliability engineering and risk analysis: a practical guide: M. Modarres, M. Kaminskiy and V. Kritsov, Marcel Dekker Inc., New York, 1999, 542 pages
494
Reliability engineering and risk analysis: a practical guide: M. Modarres, M. Kaminskiy and V. Kritsov, Marcel Dekker Inc., New York, 1999, 542 pages
495
Reliability engineering: Old problems and new challenges
496
Reliability engineering: Old problems and new challenges
497
Reliability enhancement in nickel-particle-dispersed alkaline niobate piezoelectric composites and actuators
498
Reliability Enhancement of Computer Network System with Server Replication
499
Reliability Enhancement of the Power System by the SVC Replacement
500
Reliability equivalence factors of a general series–parallel system
501
Reliability equivalence factors of a general series–parallel system
502
Reliability equivalence factors of a parallel system
503
Reliability equivalence factors of a parallel system
504
Reliability Equivalence Factors of a System with m Non-Identical Mixed of Lifetimes
505
Reliability equivalence of independent and non-identical components series systems
506
Reliability equivalence of independent and non-identical components series systems
507
Reliability estimates for flawed mortar projectile bodies
508
Reliability estimates for flawed mortar projectile bodies
509
Reliability estimation and prediction of multi-state components and coherent systems
510
Reliability estimation and prediction of multi-state components and coherent systems
511
Reliability estimation by Bayesian method: definition of prior distribution using dependability study
512
Reliability estimation by Bayesian method: definition of prior distribution using dependability study
513
Reliability estimation for components of photovoltaic systems
514
Reliability estimation for dynamical systems subject to stochastic excitation using subset simulation with splitting Original Research Article
515
Reliability estimation for three parameter generalized exponential distribution
516
Reliability estimation of a statistical classifier
517
Reliability estimation of complex numerical problems using modified conditional expectation method
518
Reliability estimation of Iran's power network
519
Reliability Estimation of Optimal Viscoelastic Composite Shells in Critical-Time Calculations
520
Reliability estimation of semi-Markov systems: a case study
521
Reliability estimation of structures under stochastic loading—A case study on nuclear piping
522
Reliability estimation through the linear mixed effects model
523
Reliability estimation under the fuzzy environments
524
Reliability estimation using a genetic algorithm-based artificial neural network: An application to a load-haul-dump machine
525
Reliability estimation with Weibull inter failure times
526
Reliability estimations of components from masked system life data
527
Reliability estimations of components from masked system life data
528
Reliability evaluation algorithm for complex medium voltage electrical distribution networks based on the shortest path
529
Reliability evaluation and optimal design in heterogeneous multi-state series-parallel systems
530
Reliability evaluation and optimisation of imperfect inspections for a component with multi-defects
531
Reliability evaluation and optimisation of imperfect inspections for a component with multi-defects
532
Reliability Evaluation and Optimization of Systems with Standby Redundancy Scheme
533
Reliability evaluation and selection of rolling element bearings
534
Reliability evaluation and selection of rolling element bearings
535
Reliability evaluation for a waste-reduction parallel-line manufacturing system
536
Reliability evaluation for acyclic consecutively connected networks with multistate elements
537
Reliability evaluation for acyclic consecutively connected networks with multistate elements
538
Reliability evaluation for acyclic transmission networks of multi-state elements with delays
539
Reliability evaluation for airline network design in response to fluctuation in passenger demand
540
Reliability evaluation for hydrothermal generating systems:: Application to the Spanish case
541
Reliability evaluation for overall-terminal multistate flow networks with bi-directed arcs
542
Reliability evaluation for power systems containing ocean thermal energy conversion power plants
543
Reliability evaluation in distributed computing environments using the AHP
544
Reliability evaluation in generation expansion planning based on the expected energy not served
545
Reliability evaluation in generation expansion planning based on the expected energy not served
546
Reliability evaluation in nonlinear analysis of reinforced concrete structures
547
Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks
548
Reliability evaluation of a generation-resource plan using customer-outage costs in India
549
Reliability evaluation of a laser repaired die-casting die
550
Reliability evaluation of a revised stochastic flow network with uncertain minimum time
551
Reliability Evaluation of an Industrial System Using Lomax-Lindley Distribution
552
Reliability evaluation of Au–20Sn flip chip solder bump fabricated by sequential electroplating method with Sn and Au
553
Reliability evaluation of axially loaded steel members design criteria in AASHTO LRFD bridge design code
554
Reliability evaluation of axially loaded steel members design criteria in AASHTO LRFD bridge design code
555
Reliability evaluation of chloride diffusion in fatigue damaged concrete
556
Reliability Evaluation of Complex Radial Distribution Systems Considering Restoration Sequence and Network Constraints
557
Reliability evaluation of CSP soldered joints based on FEM and Taguchi method
558
Reliability evaluation of deregulated electric power systems for planning applications
559
Reliability evaluation of deregulated electric power systems for planning applications
560
RELIABILITY EVALUATION OF DEREGULATED POWER SYSTEM CONSIDERING COMPETITIVE ELECTRICITY MARKET
561
Reliability evaluation of distribution systems considering optimal restoration sequence and variable restoration times
562
Reliability evaluation of distribution systems with nonexponential down times
563
Reliability Evaluation of Fluorescence In Situ Hybridization (FISH) and G-Banding on Bone Marrow and Peripheral Blood Cells in Chronic Myelogenous Leukemia Patients
564
Reliability evaluation of furnace systems
565
Reliability evaluation of generalized phased-mission systems with repairable components
566
Reliability evaluation of generalized phased-mission systems with repairable components
567
Reliability evaluation of hard disk drive failures based on counting processes
568
Reliability evaluation of hard disk drive failures based on counting processes
569
Reliability evaluation of hybrid multiterminal HVDC subtransmission systems
570
Reliability evaluation of hybrid power markets based on multiple transaction matrix and optimal transaction curtailment
571
Reliability evaluation of large telecommunication networks Original Research Article
572
Reliability evaluation of multi-state consecutive k-out-of-r-from-n: G system
573
Reliability evaluation of multi-state weighted image-out-of-image systems
574
Reliability evaluation of multi-state weighted -out-of- systems
575
Reliability evaluation of non-reparable three-state systems using Markov model and its comparison with the UGF and the recursive methods
576
Reliability evaluation of power systems containing tidal power plant
577
Reliability Evaluation of Reverse Osmosis System in Water Treatment Using Modified Weibull Distribution
578
Reliability evaluation of SEIG rotor coremagnetization with minimum capacitive excitation for unregulated renewable energy applications in remote areas
579
Reliability evaluation of small stand-alone wind energy conversion systems using a time series simulation model
580
Reliability evaluation of software architectural styles based on correlated component failure
581
Reliability Evaluation of Solar Power Plants Equipped with parabolic Trough Reflectors
582
Reliability evaluation of substation control systems
583
Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method
584
Reliability evaluation of the power supply of an electrical power net for safety-relevant applications
585
Reliability evaluation of the power supply of an electrical power net for safety-relevant applications
586
Reliability Evaluation of Vehicle–Bridge Dynamic Interaction
587
Reliability evaluation on very high cycle fatigue property of GCr15 bearing steel
588
RELIABILITY EVALUATIONS OF 3-D FRAME SUBJECTED TO NON-STATIONARY EARTHQUAKE
589
Reliability evaluations of a database recovery with archive copies for fault latency
590
Reliability evaluations of railway power supplies by fault-tree analysis
591
Reliability factors in business software: volatility, requirements and end-users
592
Reliability for extreme value distributions
593
Reliability for lifetime distributions
594
Reliability for systems of degrading components with distinct component shock sets
595
Reliability function of a class of time-dependent systems with standby redundancy
596
Reliability functions for earthquake resistant design
597
Reliability functions for earthquake resistant design
598
Reliability functions of generalized log-normal model
599
Reliability generalization of the Junior Eysenck Personality Questionnaire
600
Reliability graph with general gates: an intuitive and practical method for system reliability analysis
601
Reliability graph with general gates: an intuitive and practical method for system reliability analysis
602
Reliability growth by failure mode removal
603
Reliability importance analysis of Markovian systems at steady state using perturbation analysis
604
Reliability importance analysis of Markovian systems at steady state using perturbation analysis
605
Reliability importance measure of energy producers from energy consumers’ perspective
606
Reliability improvement for an RFID-based psychiatric patient localization system
607
Reliability Improvement in Distribution Systems Via Game Theory
608
Reliability improvement of a sound quality index for a vehicle HVAC system using a regression and neural network model
609
Reliability improvement of distribution systems using SSVR
610
Reliability improvement of EEPROM by using WSi2 polycide gate
611
Reliability improvement of EEPROM by using WSi2 polycide gate
612
Reliability Improvement of Industrial Robots by Optimizing Operation Plans Based on Deterioration Evaluation
613
Reliability improvement of isolated generating systems by photovoltaic ac fusion converters
614
Reliability improvement of paper feeder by the integrated robust design and control approach
615
Reliability improvement of PMZNT relaxor ferroelectrics through surface modification by MnO2 doping against electroplating-induced degradation
616
Reliability improvement of rapid thermal oxide using gas switching
617
Reliability improvement of the dual-priority protocol under unreliable transmission
618
Reliability improvement techniques for HomeRF system
619
Reliability improvement through alternative designs—A case study
620
Reliability improvement through alternative designs—A case study
621
Reliability in Assessing Basic Life Support Skills in infants by Utilizing Video Recordings
622
Reliability in dams and the effects of spillway dimensions on risk levels
623
Reliability in Dream Research: A Methodological Note
624
Reliability in Electricity Markets: Another Binding Constraint?
625
Reliability in Perceptual Analysis of Voice Quality
626
Reliability in strongly innovative products; a threat or a challenge?
627
Reliability in strongly innovative products; a threat or a challenge?
628
RELIABILITY INDEX FOR REINFORCED CONCRETE FRAMES USING NONLINEAR PUSHOVER AND DYNAMIC ANALYSIS
629
Reliability indicator for layered composites with strongly non-linear behaviour
630
Reliability indices of a radial distribution system with sectionalizing as a function of network structure parameters
631
Reliability Indices Utlization in Combined Heat and Power ( CHP ) Optimal Operation
632
Reliability inference and sample-size determination under double censoring for some two-parameter models
633
Reliability investigation of implanted microwave InGaP/GaAs HBTs
634
Reliability investigation of InGaP/GaAs HBTs under current and temperature stress
635
Reliability investigation of InGaP/GaAs HBTs under current and temperature stress
636
Reliability issues in III-V compound semiconductor devices: optical devices and GaAs-based HBTs
637
Reliability issues in III-V compound semiconductor devices: optical devices and GaAs-based HBTs
638
Reliability issues in todayʹs electric power utility environment
639
Reliability Issues of Bottom-Contact Pentacene Thin-Film Transistors
640
Reliability lower bounds for two-dimensional consecutive-k-out-of-n:F systems
641
Reliability management in a competitive marketplace
642
Reliability measure assignment to sonar for robust target differentiation
643
Reliability Measurement and Enhancement of the Communication Networks
644
Reliability Measurement’s in Depression Detection Using a Data Mining Approach Based on Fuzzy-Genetics
645
RELIABILITY MEASURES AND SENSITIVITY ANALYSIS OF A COMPLEX MATRIX SYSTEM INCLUDING POWER FAILURE
646
Reliability measures for consolidation settlement by means of CPT data
647
Reliability Measures for Membrane Protein Topology Prediction Algorithms
648
Reliability Measures Improvement and Sensitivity Analysis of a Coal Handling Unit for Thermal Power Plant
649
Reliability Measures in the Discrete Bivariate Set-Up and Related Characterization Results for a Bivariate Geometric Distribution
650
RELIABILITY MEASURES MEASUREMENT UNDER RULE-BASED FUZZY LOGIC TECHNIQUE
651
Reliability measures of a computer system with priority to PM over the H/W repair activities subject to MOT and MRT
652
RELIABILITY MEASURES OF A DEGRADABLE SYSTEMWITH STANDBY SWITCHING FAILURES AND REBOOT DELAY
653
Reliability methods as management tools: dependence modelling and partial mission success
654
Reliability model of a wind tunnel balance system
655
Reliability model of drilled composite materials
656
Reliability Model of Fuzzy Consecutive k-out-of-n: F System
657
Reliability Model of Power Transformer with ONAN Cooling
658
Reliability modeling and analysis for a novel design of modular converter system of wind turbines
659
Reliability modeling and analysis for a novel design of modular converter system of wind turbines
660
Reliability modeling and analysis of stand-alone PEM fuel cell power plants
661
Reliability modeling and assessment of grid-connected PEM fuel cell power plants
662
Reliability Modeling and Performance Evaluation of Sachet Water Production System Using Gumbel- Hougaard Family Copula
663
Reliability modeling involving two Weibull distributions
664
Reliability modeling of a hard real-time system using the path-space approach
665
Reliability modeling of a hard real-time system using the path-space approach
666
Reliability modeling of degradation of products with multiple performance characteristics based on gamma processes
667
Reliability modeling of degradation of products with multiple performance characteristics based on gamma processes
668
Reliability modeling of demand response considering uncertainty of customer behavior
669
Reliability Modeling of Different Types of Electric Vehicles in Renewable Applications
670
Reliability modeling of digital component in plant protection system with various fault-tolerant techniques
671
Reliability modeling of distributed generation in conventional distribution systems planning and analysis
672
Reliability modeling of networked control systems using dynamic flowgraph methodology
673
Reliability modeling of networked control systems using dynamic flowgraph methodology
674
Reliability modeling of surface controlled subsurface safety valves
675
Reliability Modeling of Various Type of Wind Turbines
676
Reliability modelling and analysis of a two unit continuous casting plant
677
Reliability Modelling of a Computer System with Priority to H/W Repair over Replacement of H/W and Up-gradation of S/W Subject to MOT and MRT
678
Reliability modelling of medium voltage distribution systems of nuclear power plants using generalized stochastic petri nets
679
Reliability modelling of repairable systems using Petri nets and fuzzy Lambda–Tau methodology
680
Reliability modelling of repairable systems using Petri nets and fuzzy Lambda–Tau methodology
681
Reliability Modelling of the Redundancy Allocation Problem in the Series-parallel Systems and Determining the System Optimal Parameters
682
Reliability modelling using G-queues
683
Reliability models based on bivariate exponential distributions
684
Reliability models for existing structures based on dynamic state estimation and data based asymptotic extreme value analysis
685
Reliability models of m-out-of-n systems under incomplete information
686
Reliability of 1-Repetition Maximum Estimation for Upper and Lower Body Muscular Strength Measurement in Untrained Middle Aged Type 2 Diabetic Patients
687
Reliability of 3 methods for assessing shoulder strength
688
RELIABILITY OF A BRAZILIAN PORTUGUESE TRANSLATED and CROSS-CULTURALLY ADAPTED VERSION OF THE MJOA SCALE
689
Reliability of a BTEX radial diffusive sampler for thermal desorption: field measurements
690
Reliability of a computer network in case capacity weight varying with arcs, nodes and types of commodity
691
Reliability of a computer network in case capacity weight varying with arcs, nodes and types of commodity
692
Reliability of a computerised alogrithm in the classification of hemilpegic gait
693
Reliability of a controllable M/M/2 system with warm standbys operating under the triadic (0, Q, N, M) policy
694
Reliability of a drug history questionnaire (DHQ)
695
Reliability of a Functional Test Battery Evaluating Functionality, Proprioception and Strength of the Ankle Joint
696
Reliability of a high energy one-loop expansion of e+e−→W+W− in the SM and in the MSSM Original Research Article
697
Reliability of a job execution process using signatures
698
Reliability of a k out of n system of components sharing a common environment Original Research Article
699
Reliability of a method for analyzing three-dimensional knee kinematics during gait
700
Reliability of a new measure of H-reflex excitability
701
Reliability of a New Radiological Parameter Named the Modified Tönnis Angle for the Evaluation of Acetabular Dysplasia in Adults
702
Reliability of a new, hand-held device for assessing skeletal muscle stiffness
703
Reliability of a non-invasive [11C]-raclopride scan to measure D2- dopamine receptors
704
Reliability of a physical activity questionnaire in middle-aged men
705
Reliability of a preventability model in maternal death and morbidity needs further assessment
706
Reliability of a revised NOTECHS scale for use in surgical teams
707
Reliability of a series system with redundancy and one repair facility
708
Reliability of a small power system using solar power and hydro
709
Reliability of a system under two types of failures using a Markovian arrival process
710
Reliability of a VMC and its improvement
711
Reliability of a VMC and its improvement
712
Reliability of acyclic multi-state networks with constant transmission characteristics of lines
713
Reliability of acyclic multi-state networks with constant transmission characteristics of lines
714
Reliability of AIN substrates and their solder joints in IGBT power modules
715
Reliability of AIN substrates and their solder joints in IGBT power modules
716
Reliability of Allen’s test in selection of patients for radial artery harvest
717
Reliability of Ambient Noise Horizontal-to-Vertical Spectral Ratio in Urban Environments: The Case of Thessaloniki City (Northern Greece)
718
Reliability of an expert-based runoff and erosion model: Application of STREAM to different environments
719
Reliability of an HTR-module primary circuit pressure boundary Influences, sensitivity, and comparison with a PWR Original Research Article
720
Reliability of analytical information in the XXIst century Original Research Article
721
Reliability of analytical systems: use of control charts, time series models and recurrent neural networks (RNN)
722
Reliability of assessment and circumstances of performance of thorough skin self-examination for the early detection of melanoma in the Check-It-Out Project
723
Reliability of Assessment of Protein Structure Prediction Methods
724
Reliability of assigning correct current procedural terminology—4 E/M codes
725
Reliability of assigning OH ··· O hydrogen bonds to short intermolecular O ··· O separations in cyclodextrin and oligosaccharide crystal structures: Addendum
726
Reliability of Au bump flip chip packages with adhesive materials using four-point bending test
727
Reliability of autoregressive error models as post-processors for probabilistic streamflow forecasts
728
RELIABILITY OF BAHASA MALAYSIA VERSION OF FAMILY ENVIRONMENT SCALE AND ITS MEASUREMENT ISSUES
729
Reliability of base isolation for the protection of critical equipment from earthquake hazards
730
Reliability of beams according to Eurocodes in serviceability limit state
731
Reliability of binary diffusion coefficients determined from tailing response curves measured by the Taylor dispersion method in the near critical region
732
Reliability of body condition scoring of sheep for cross-farm assessments C.J. Phythian∗,1,
733
Reliability of Body Landmark Analyzer (BLA) system for Measuring Hyperkyphosis and Hyperlordosis Abnormalities
734
Reliability of bond dissociation enthalpy calculated by the PM6 method and experimental TEAC values in antiradical QSAR of flavonoids Original Research Article
735
Reliability of brain structure morphometry in hydrocephalic children using MR images
736
Reliability of CA15-3 Tumor Marker in Monitoring Therapeutic Response in Different Molecular Subtypes of Metastatic Breast Cancer
737
Reliability of calculating the cepstral peak without linear regression analysis
738
Reliability of cardiorespiratory measurements with a new ergospirometer during intense treadmill exercise in Thoroughbred horses
739
Reliability of cause-specific mortality rate statistics: case of Lithuania
740
Reliability of Center of Pressure measures of Postural Stability in Anterior Cruciate Ligament Reconstructed Athletes: Effect of Vibration and Cognitive Load
741
Reliability of centre of pressure summary measures of postural steadiness in healthy young adults
742
Reliability of Cephalogram in Determining Skull Gender Dimorphism
743
Reliability of ceramic components for total hip endoprostheses
744
Reliability of ceramic components for total hip endoprostheses
745
Reliability of Chalmersʹ Scale to Assess Quality in Meta-Analyses on Pharmacological Treatments for Osteoporosis
746
Reliability of chemical index model in determining fly ash effectiveness against alkali-silica reaction induced by highly reactive glass aggregates
747
Reliability of Chest Wall Mobility and Its Correlation with Lung Functions in Healthy Nonsmokers, Healthy Smokers, and Patients with COPD
748
Reliability of children’s self-reported cigarette smoking
749
Reliability of Clinician-Based (GRBAS and CAPE-V) and Patient-Based (V-RQOL and IPVI) Documentation of Voice Disorders
750
Reliability of commercially available hydrogen sensors for detection of hydrogen at critical concentrations: Part I – Testing facility and methodologies
751
Reliability of commercially available hydrogen sensors for detection of hydrogen at critical concentrations: Part II – selected sensor test results
752
Reliability of components in composite materials
753
Reliability of composite steel bridge beams designed following AASHTOʹs LFD and LRFD specifications
754
Reliability of composite structures — impact loading
755
Reliability of compound semiconductor devices for space applications
756
Reliability of compound semiconductor devices for space applications
757
Reliability of concentric and eccentric torque during isokinetic knee extension in post-stroke hemiparesis
758
Reliability of Concrete Masonry Unit Walls Subjected to Explosive Loads
759
Reliability of Cone-Beam Computed Tomography in Diagnosis of Root Resorption Due to Impacted Maxillary Canine
760
Reliability of Conventional Settlement Evaluation for Circular Foundations on Stone Columns
761
Reliability of COP-based postural sway measures and age-related differences
762
Reliability of core test – Critical assessment and proposed new approach
763
Reliability of Corrective Exercise Specialist Raters Assessing Movement System Impairment Approach Items in Transient Low Back Pain Developers During Prolonged Standing
764
Reliability of corrosion-damaged steel structures using interval probability theory
765
Reliability of damage mechanism localisation by acoustic emission on glass/epoxy composite material plate
766
Reliability of demand-based phased-mission systems subject to fault level coverage
767
Reliability of demand-based phased-mission systems subject to fault level coverage
768
Reliability of depth jumping measures using a force platform
769
RELIABILITY OF DETECTION OF CITRUS TRISTEZA VIRUS BY AN IMMUNOCHROMATOGRAPHIC LATERAL FLOW ASSAY IN COMPARISON WITH ELISA
770
Reliability of Determination of Bony Landmarks of the Distal Femur on MR Images and MRIBased 3D Models
771
Reliability of diabetic patients’ gait parameters in a challenging environment
772
Reliability of diagnosis of melanoma in situ
773
Reliability of dipole models of epileptic spikes
774
Reliability of Disk Diffusion Test Results for the Antimicrobial Susceptibility Testing of Nosocomial Gram-positive Microorganisms: Is E-test Method Better?
775
Reliability of doctorsʹ anthropometric measurements to detect obesity
776
Reliability of double-wall containment against the impact of hard projectiles
777
Reliability of dynamic systems under limited information
778
Reliability of echocardiographic measurements of left cardiac structures in healthy children
779
Reliability of elasto-plastic structure using finite element method
780
Reliability of elbow stretch reflex assessment in chronic post-stroke hemiparesis
781
Reliability of electrode wear compensation based on material removal per discharge in micro EDM milling
782
Reliability of electromechanical dissociation in the diagnosis of left ventricular free wall rupture in acute myocardial infarction
783
Reliability of electromyographic and torque measures during isometric axial rotation exertions of the trunk
784
Reliability of Envelope Inversion for the High-Frequency Radiation Source Process Using Strong Motion Data: Example of the 1995 Hyogoken Nanbu Earthquake
785
Reliability of environmental fate modeling results for POPs based on various methods of determining the air/water partition coefficient (log KAW)
786
Reliability of Essay Ratings: A Study on Generalizability Theory
787
Reliability of exercise-induced ST segment changes to detect restenosis 3 months after coronary angioplasty: Significance of the appearance in other leads, ,
788
Reliability of factorial structure of the Peters et al. delusions inventory (PDI-21)
789
Reliability of FAMACHA© chart for the evaluation of anaemia in goats in and around Maiduguri
790
Reliability of fault-tolerant systems with parallel task processing
791
Reliability of FEUA in AKI and its Combination with Other Renal Failure Indices
792
Reliability of fiber-reinforced composite laminate plates
793
Reliability of fibres in solid-phase microextraction for routine analysis of the headspace of aromatic and medicinal plants
794
Reliability of field, greenhouse and cut-shoot screening procedures for evaluating susceptibility of Scots pine to Melampsora pinitorqua
795
Reliability of Fine Needle Aspiration Cytology for Salivary Gland Lesions
796
Reliability of Fixation Preference for Detecting Amblyopia in Strabismic Patients
797
Reliability of force direction dependent EMG parameters of shoulder muscles for clinical measurements
798
Reliability of functional connectivity in resting-state functional MRI
799
Reliability of Functional Performance and Neurocognitive Tests in Athletes with and without Functional Ankle Instability
800
Reliability of Functional Performance and Neurocognitive Tests in Athletes with and without Functional Ankle Instability
801
Reliability of gait temporal distance measures in normal subjects with and without EMG electrodes
802
Reliability of geomagnetic paleointensity data: the effects of the NRM fraction and concave-up behavior on paleointensity determinations by the Thellier method
803
Reliability of Gingival Blood Sample to Screen Diabetes in Dental Hospital
804
Reliability of Greek version Gross Motor Function Classification System
805
Reliability of grid service systems
806
Reliability of ground reaction forces measured on a treadmill system in healthy dogs
807
Reliability of health utility measures and a test of values clarification
808
Reliability of health-related quality-of-life measures 1 year after surgical procedures for pelvic floor disorders
809
Reliability of hearing screening in high-risk neonates: Comparative study of otoacoustic emission, automated and conventional auditory brainstem response
810
Reliability of Herman–Wallis factors for Raman spectroscopy of Q-branch molecular transitions
811
Reliability of high performance fibre composites
812
Reliability of Human Serum Protein Profiles Generated with C8 Magnetic Beads Assisted Maldi-TOF Mass Spectrometry
813
Reliability of hydrogen sensing based on bimetallic Ni–Pd/graphene composites
814
Reliability of Identification of Seniors at Risk Screening Tool in Predicting Functional and Mental Decline in Discharged Elderly Patients
815
Reliability of imperfection-sensitive composite shells via the Koiter-Cohen criterion
816
Reliability of Imprint Cytology and Frozen Sections for Demonstrating Free Surgical Margins in the Periocular Basal Cell Carcinoma
817
Reliability of Indiana Birth Certificate Data Compared to Medical Records
818
Reliability of indicators of sheep welfare assessed by a group observation method
819
Reliability of indices of weight and height in assessment of nutritional state in children
820
Reliability of inferior dermoglandular pedicle reduction mammaplasty in reconstruction of partial mastectomy defects: Surgical planning and outcome
821
Reliability of information on the Internet: Some distinctions
822
Reliability of Infrared Tympanic Thermometry in the Detection of Rectal Fever in Children, ,
823
Reliability of inserts in sandwich composite panels
824
Reliability of intensity dependence of auditory-evoked potentials
825
Reliability of Interaural Time Difference-Based Localization Training in Elderly Individuals with Speech-in-Noise Perception Disorder
826
Reliability of intraoperative contrast transesophageal echocardography for detecting interatrial communications in patients with other congenital cardiovascular malformations
827
Reliability of Iranian Existing Residential Reinforced Concrete Structures in Seismic Events
828
Reliability of IR-imaging of PV-plants under operating conditions
829
Reliability of isokinetic normalized peak torque assessments for knee muscles in post-stroke hemiparesis
830
Reliability of jack-ups under extreme storm conditions
831
Reliability of judgments of stuttered words by parents using Ryanʹs operational definition
832
Reliability of judgments of stuttering and disfluency in young children’s speech
833
Reliability of kinetics during clinical gait analysis: A comparison between normal and children with cerebral palsy
834
Reliability of Knee Kinematic Parameters during Drop Jump Landing in Healthy Male Subjects
835
Reliability of k-out-of-n systems with phased-mission requirements and imperfect fault coverage
836
Reliability of k-out-of-n systems with phased-mission requirements and imperfect fault coverage
837
Reliability of k-r-out-of-N:G system subject to random and common cause failure
838
Reliability of laboratory measurement of human food intake
839
Reliability of lactate threshold assessment during rowing
840
Reliability of LA-ICP-MS U-Pb dating of zircons with high U concentrations: A case study from the U-bearing Douzhashan Granite in South China
841
Reliability of Land Capability Map in Watershed Hydrological Simulation using SWAT Model
842
Reliability of language mapping with magnetic source imaging in epilepsy surgery candidates
843
Reliability of Large Systems, K. Kolowrocki. Elsevier, Amsterdam (2004), ISBN: 0-080-44429-6
844
Reliability of laterality effects in a dichotic listening task with words and syllables
845
Reliability of LCI considering the uncertainties of energy consumptions in input–output analyses
846
Reliability of lead-calcium automotive batteries in practical operations
847
Reliability of LiDAR derived predictors of forest inventory attributes: A case study with Norway spruce
848
Reliability of lifeline networks under seismic hazard
849
Reliability of Linear Measurements Made on Reconstructed CBCT Images
850
Reliability of linear structures with parameter uncertainty under non-stationary earthquake
851
Reliability of linear systems under Poisson white noise
852
Reliability of liquid crystal cell and immiscibility between dual-curable adhesives and liquid crystal
853
Reliability of lithium batteries in search and rescue beacons
854
Reliability of lunar orbital periods extracted from ancient cyclic tidal rhythmites
855
Reliability of magnetic fabric of weakly deformed mudrocks as a palaeostress indicator in compressive settings
856
Reliability of Magnetic Resonance Imaging Findings Interpretation in Patients with Lumbar Disk Herniation
857
Reliability of Magnetic Resonance Imaging Findings Interpretation in Patients with Lumbar Disk Herniation
858
Reliability of maintained ship hull girders subjected to corrosion and fatigue
859
Reliability of maintained systems under a semi-Markov setting
860
Reliability of maintained, corrosion protected plates subjected to non-linear corrosion and compressive loads
861
Reliability of malondialdehyde as a biomarker of oxidative stress in psychological disorders
862
Reliability of material and geometrically non-linear reinforced and prestressed concrete structures
863
Reliability of material data measurements for hygroscopic buffering
864
Reliability of maternal-reports regarding the use of household pesticides: Experience from a case–control study of childhood leukemia
865
Reliability of maximum number of simultaneously open channels as an estimator for the number of channels in single-channel recordings
866
Reliability of mean transit time obtained using perfusion-weighted MR imaging; comparison with positron emission tomography
867
Reliability of Measurements on Plaster and Digital Models of Patients with a Cleft Lip and Palate
868
Reliability of measures of centrality and prominence
869
Reliability of mechanical properties of induction sintered iron based powder metal parts
870
Reliability of membrane test cell measurements Original Research Article
871
Reliability of methods to separate stress tensors from heterogeneous fault-slip data
872
Reliability of MIC Gradient Strips (E-test) in Detection of Colistin Resistant Acinetobacter baumannii Caused an Outbreak in a Teaching Hospital in Tehran
873
Reliability of moderate-intensity and vigorous physical activity stage of change measures for young adults
874
Reliability of molecular weight determination methods for oligomers investigated using certified polystyrene reference materials
875
Reliability of moss (Hylocomium splendens and Pleurozium schreberi) as a bioindicator of atmospheric chemistry in the Barents region: Interspecies and field duplicate variability
876
Reliability of motor cortex transcranial magnetic stimulation in four muscle representations
877
Reliability of Motor Evoked Potentials Induced by Transcranial Magnetic Stimulation: The Effects of Initial Motor Evoked Potentials Removal
878
Reliability of multilayer ceramic capacitors with nickel electrodes
879
Reliability of multimodal evaluation of abnormal screening mammogram results, , ,
880
Reliability of multi-state systems with two failure-modes
881
Reliability of neted polymerae chain reaction in the diagnoi of bacterial endophthalmiti
882
Reliability of neural encoding
883
Reliability of nominations and two-dimensional rating scale methods for sociometric status determination
884
Reliability of non-repairable phased-mission systems with propagated failures
885
Reliability of non-repairable phased-mission systems with propagated failures
886
Reliability of nutritional screening and assessment tools
887
Reliability of Objective Voice Measures of Normal Speaking Voices
888
Reliability of Omani Women’s Self-Reporting of Gynaecologic Morbidities
889
Reliability of one-second tempering of Charpy specimens
890
Reliability of one-second tempering of Charpy specimens
891
Reliability of Os model ages in pervasively metasomatized continental mantle lithosphere: a case study of Sidamo spinel peridotite xenoliths (East African Rift, Ethiopia)
892
Reliability of palaeostress analysis from fault striations in near multidirectional extension stress fields. Example from the Ebro Basin, Spain
893
Reliability of parameter estimation in respirometric models
894
Reliability of parameters of associated base straight line in step height samples: Uncertainty evaluation in step height measurements using nanometrological AFM
895
RELIABILITY OF PARENTAL HISTORY OF ANTIBIOTIC USE FOR FILIPINO CHILDREN ADMITTED WITH ACUTE LOWER RESPIRATORY TRACT INFECTION
896
Reliability of partially-destructive tests to assess the strength of concrete on site
897
Reliability of PCR based Screening for Identification and Quantification of GMOs
898
Reliability of Peak Exercise Testing in Patients With Heart Failure With Preserved Ejection Fraction
899
Reliability of pediobarographs for paediatric foot deformity
900
Reliability of perceived health by sex and age
901
Reliability of peroneal reaction time measurements
902
Reliability of Persian Early Computed Tomography Score in Patients with Brain Infarction
903
Reliability of Persian Handwriting Assessment Tool in Iranian Primary School Students
904
Reliability of physical activity measures from accelerometry among preschoolers in free-living conditions
905
Reliability of Platelet Indices for Diagnosing Pulmonary Embolism; a Brief Report
906
Reliability of Plug Power GenSys™ fuel cell systems
907
Reliability of Porous Materials: Two Stochastic Approaches
908
Reliability of Postoperative Multi-slice Computed Tomography in Assessment of Pedicle Screw Placement in Thoracic and Lumbar Spinal Fixation
909
Reliability of Postoperative Radiographies in Ankle Fractures
910
RELIABILITY OF POSTURAL BALANCE EVALUATION USING THE BIODEX BALANCE SYSTEM IN SUBJECTS WITH AND WITHOUT LOW BACK PAIN
911
Reliability of power cycling for IGBT power semiconductor modules
912
RELIABILITY OF PRACTICAL IRANIAN CRITERIA (PIC) FOR CLASSIFICATION OF BRAIN INFARCT
913
RELIABILITY OF PREDICTION OF PERIAMPULLARY TUMOURS RESECTABILITY BEFORE PANCREATICODUODENECTOMY OPERATION
914
Reliability of pressure-derived myocardial fractional flow reserve in assessing coronary artery stenosis in patients with previous myocardial infarction
915
Reliability of Pressurestat™ for measuring plantar foot pressures in patients with rheumatoid arthritis
916
Reliability of Pre-Transplant Live Donor Renal Biopsies in Predicting the Graft Outcome
917
Reliability of Prostatic Specific Antigen in Detection of Prostatic Cancer Among Arab Population
918
Reliability of proximal migration measurements in shoulder arthroplasty
919
Reliability of proxy reports of parental smoking by elementary schoolchildren
920
Reliability of psychiatric diagnosis in postmortem research
921
Reliability of Pubertal Self Assessment Method: An Iranian Study
922
Reliability of public information: predators provide more information about risk than conspecifics
923
Reliability of QRS duration and morphology on surface electrocardiogram to identify ventricular dyssynchrony in patients with idiopathic dilated cardiomyopathy
924
Reliability of quantitative and qualitative tests to identify heterozygotes carrying severe or mild G6PD deficiency
925
Reliability of quantitative EEG features
926
Reliability of quasi integrable generalized Hamiltonian systems
927
Reliability of radio frequency dielectric experiments in perovskites
928
Reliability of radio frequency dielectric experiments in perovskites
929
Reliability of radio frequency/microwave power packages: the effects of component materials and assembly processes
930
Reliability of radio frequency/microwave power packages: the effects of component materials and assembly processes
931
Reliability of radiographic assessment of acromial morphology
932
Reliability of radiographic intervertebral disc height measurement for in vivo rat-tail model
933
Reliability of radiologic classification for cuff tear arthropathy
934
Reliability of radiologic glenohumeral osteoarthritis classifications
935
Reliability of railway traffic personnel
936
Reliability of Random Digit Dialing Calls to Enumerate an Adult Female Population
937
Reliability of range-of-motion measurement in the elbow and forearm
938
Reliability of RC beams under chloride-ingress
939
Reliability of RC shielded steel plates against the impact of sharp nose projectiles
940
Reliability of Recall of Physical Activity in the Distant Past
941
Reliability of Recall of Physical Activity in the Distant Past
942
Reliability of rechargeable batteries in a photovoltaic power supply system
943
Reliability of reconstructed β-orientation maps in titanium alloys
944
Reliability of reconstructed β-orientation maps in titanium alloys
945
Reliability of recording uterine cancer in death certification in France and age-specific proportions of deaths from cervix and corpus uteri
946
Reliability of recurrence quantification analysis measures of the center of pressure during standing in individuals with musculoskeletal disorders
947
Reliability of reflectance measures in passive filters
948
Reliability of regulatory networks and its evolution
949
Reliability of Rehabilitative Ultrasonography to Measure Transverse Abdominis and Multifidus Muscle Dimensions
950
Reliability of reinforced concrete structures under fatigue
951
Reliability of reinforced concrete structures under fatigue
952
Reliability of relative palaeointensities of a sediment core with climatically-triggered strong magnetisation changes
953
Reliability of relative palaeointensities of a sediment core with climatically-triggered strong magnetisation changes,
954
Reliability of reporting left ventricular systolic function by echocardiography: A systematic review of 3 methods
955
Reliability of reporting on lifestyle and agricultural factors by a sample of participants in the agricultural health study from iowa
956
Reliability of reporting self-measured blood pressure values by hypertensive patients
957
Reliability of resolution of ST-segment elevation after coronary reperfusion in predicting myocardial salvage in anterior wall acute myocardial infarction
958
Reliability of respiratory sinus arrhythmia in R-R intervals, in 14-, 20-, and 26-week-old infants
959
Reliability of retinal photography in the aement of retinal microvacular characteritic: the atherocleroi rik in communitie tudy
960
Reliability of rigid piles subjected to lateral loads
961
Reliability of robotics: an overview with identification of specific aspects related to remote handling in fusion machines
962
Reliability of Routine Radiographs for Conservatively Treated Metacarpal Shaft and Neck Fractures
963
Reliability of RT-PCR methods for measuring relative gene expression in mast cells
964
Reliability of RT-PCR methods for measuring relative gene expression in mast cells
965
Reliability of safety-instrumented systems subject to partial testing and common-cause failures
966
Reliability of safety-instrumented systems subject to partial testing and common-cause failures
967
Reliability of Salivary Testosterone Measurements in Diagnosis of Polycystic Ovarian Syndrome
968
Reliability of sampling designs for spatial snow surveys
969
Reliability of Scatter Correction Methods in SPECT by Setting Two Energy Windows
970
Reliability of scored patient generated subjective global assessment for nutritional status among HIV infected adults in TASO, Kampala
971
Reliability of sea level dating using Th/U method for mollusks from the west coast of the red sea and from the atlantic coast of the Moroccan high atlas
972
RELIABILITY OF SECOND-ORDER FACTOR OF A REVISED TWO-FACTOR STUDY PROCESS QUESTIONNAIRE (R-SPQ-2F) AMONG UNIVERSITY STUDENTS IN MALAYSIA
973
Reliability of segmental accelerations measured using a new wireless gait analysis system
974
Reliability of Seismic Moment Tensor Inversions for Induced Microseismicity at Kidd Mine, Ontario
975
Reliability of Selected Measures of Nicotine Dependence among Adolescents
976
Reliability of selective neck muscle size in migraine patients and healthy controls using ultrasonography
977
Reliability of self-report: paper versus online administration
978
Reliability of self-reported behavior for exposure to tanning beds, self-tanning creams, and sun sensitivity
979
Reliability of Self-Reported Breast Screening Information in a Survey of Lower Income Women
980
Reliability of self-reported height and weight measurement in the evaluation of adult overweight and obesity
981
Reliability of self-reported history in predicting immunity against measles, rubella, mumps, and varicella among health care workers
982
Reliability of Self-Reported Reproductive Factors and Childhood Social Class Indicators in a Case-Control Study in Women
983
Reliability of self-reported smoking history and age at initial tobacco use
984
Reliability of self-reports of cigarette use in novice smokers
985
Reliability of separation of duty in ANSI standard role-based access control
986
Reliability of Serum Assays of Iron Status in Postmenopausal Women
987
Reliability of serum iron, ferritin, nitrite, and association with risk of renal cancer in women
988
Reliability of several component sets with inspections at random times
989
RELIABILITY OF SEWER FLOW QUALITY MODELS - RESULTS OF A NORTH RHINE-WESTPHALIAN COMPARISON
990
RELIABILITY OF SEWER FLOW QUALITY MODELS - RESULTS OF A NORTH RHINE-WESTPHALIAN COMPARISON
991
Reliability of Shallow Foundations Subjected to Multidirectional Seismic Loading
992
Reliability of shear-deficient RC beams strengthened with CFRP-strips
993
Reliability of Shoulder Rotators Isometric Strength Test using a Novel Pulley Electromechanical Dynamometer. Influence of the Assessment Position
994
Reliability of silicon nitride gate dielectrics grown at 400 °C formed by microwave-excited high-density plasma
995
Reliability of Single-Layer Steel Space Domes under the Effects of the Changes in the Height-to-Span Ratio
996
Reliability of sleep log data versus actigraphy in veterans with sleep disturbance and PTSD
997
Reliability of Sn–Ag–Sb lead-free solder joints
998
Reliability of software with an operational profile
999
Reliability of soil water content measurements by the calcium carbide gas pressure method for small specimens
1000
Reliability of Speaking and Maximum Voice Range Measures in Screening for Dysphonia
