<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Poly(amido-amine)-based hydrogels with tailored mechanical properties and degradation rates for tissue engineering
2
Poly(amidoamine)-grafted Graphene Oxide/Epoxy Nanocomposite: Thermal/ Mechanical Characteristics and Viscoelastic Properties
3
Poly(amidosulfonic acid) modified glassy carbon electrode for determination of isoniazid in pharmaceuticals
4
Poly(amphiphilic pyrrole)-tyrosinase-peroxidase electrode for amplified flow injection-amperometric detection of phenol
5
Poly(anhydride-co-imides): in vivo biocompatibility in a rat model
6
Poly(aniline boronic acid)-based conductimetric sensor of dopamine
7
Poly(aniline-co-pyrrole): powders, films, and colloids. Thermophoretic mobility of colloidal particles
8
Poly(aniline-formaldehyde): A new and effective corrosion inhibitor for mild steel in hydrochloric acid
9
Poly(APD-ribosyl)ation, a DNA damage-driven protein modification and regulator of genomic instability
10
Poly(aryl ether sulfide)s by sulfide-activated nucleophilic aromatic substitution polymerization
11
Poly(arylene disulfide)/graphite nanosheets composites as bipolar plates for polymer electrolyte membrane fuel cells
12
Poly(arylene ether sulfone) multi-block copolymers bearing perfluoroalkylsulfonic acid groups
13
Poly(arylene ether sulfone) proton exchange membranes with flexible acid side chains
14
Poly(arylene ether sulfone) with tetra(quaternary ammonium) moiety in the polymer repeating unit for application in solid alkaline exchange membrane fuel cells
15
Poly(arylene ether sulfone)s containing pendant sulfonic acid groups as membrane materials for direct methanol fuel cells
16
Poly(arylene ether sulfone)s ionomers with pendant quaternary ammonium groups for alkaline anion exchange membranes: Preparation and stability issues
17
Poly(arylene ether) electrolyte membranes bearing aliphatic-chain-linked sulfophenyl pendant groups
18
Poly(arylene ether) ionomers containing sulfofluorenyl groups: Effect of electron-withdrawing groups on the properties
19
Poly(arylene ether)s with pendant sulfoalkoxy groups prepared by direct copolymerization method for proton exchange membranes
20
Poly(arylene ether)s with trifluoromethyl groups via meta-activated nitro displacement reaction
21
Poly(arylenebutadiynylene)s as high-yield carbonaceous precursor polymers
22
Poly(arylene-ethynylene) with tuned rigidity/flexibility as reinforcing component in polystyrene-based ionomer blends
23
Poly(arylenevinylene) blends for white light emitting diodes
24
Poly(arylenevinylene) blends for white light emitting diodes
25
Poly(aspartate-g-PEI800), a polyethylenimine analogue of low toxicity and high transfection efficiency for gene delivery
26
Poly(azoaromatic viologen): its synthesis and reversibly photocontrollable supramolecular assembly in a polymer/low-molar-mass system
27
Poly(azolyl) chelate chemistry 14.[1] κ2-S,S′ vs κ3-H,S,S′- H2B(mt)2 (mt=methimazolyl)borate coordination in the complex [W(CO){H2B(mt)2}2]
28
Poly(basic red 9) doped functionalized multi-walled carbon nanotubes as composite films for neurotransmitters biosensors
29
Poly(benzimidazole) functionalized multi-walled carbon nanotubes/100% acidified poly(hydroxyaminoether) composites: Synthesis, characterization and properties
30
Poly(benzimidazole)-epoxide crosslink membranes for high temperature proton exchange membrane fuel cells
31
Poly(benzo[c]thiophene-2-oxide) thin film
32
Poly(benzobisoxazole divinylene): synthesis, photophysical properties, and electron paramagnetic resonance studies
33
Poly(benzoxazine-co-urethane)s: A new concept for phenolic/urethane copolymers via one-pot method
34
Poly(benzyl ether) dendrimers with strongly fluorescent distyrylbenzene cores as the fluorophores for peroxyoxalate chemiluminescence: insulating effect of dendritic structures on fluorescent sites
35
Poly(benzyloxy ethyl methacrylate): preparation by free radical polymerization and by group transfer polymerization; with subsequent debenzylation to form poly(2-hydroxyethyl methacrylate)
36
Poly-(bis((μ4-1,4-benzenedicarboxylato)-bis(μ2-N,N-dimethylformamide)-(nitrato)-gadolinium (III))) metal organic framework: Synthesis, magnetic and luminescence properties
37
Poly(bisphenol A carbonate)–poly(dimethylsiloxane) multiblock copolymers
38
Poly(borosilazanes) as precursors of SiBCN glasses: synthesis and high temperature properties
39
Poly(brilliant cresyl blue) electrogenerated on single-walled carbon nanotubes modified electrode and its application in mediated biosensing system
40
Poly(brilliant green) and poly(thionine) modified carbon nanotube coated carbon film electrodes for glucose and uric acid biosensors
41
Poly(butyl acrylate)/NaI/I2 electrolytes for dye-sensitized nanocrystalline TiO2 solar cells
42
Poly(butylene succinate)/poly(vinyl phenol) blends. Part 1. Miscibility and crystallization
43
Poly(butylene sucinate-co-adipate)/montmorillonite nanocomposites: effect of organic modifier miscibility on structure, properties, and viscoelasticity
44
Poly(butylene terephthalate) fire retarded by bisphenol A bis(diphenyl phosphate)
45
Poly(butylene terephthalate) modified with ethoxylated bisphenol S with increased glass transition temperature and improved thermal stability
46
Poly(butylene terephthalate) poly(ethylene terephthalate) mixtures formed by ball milling
47
Poly(butylene terephthalate)/montmorillonite nanocomposites: Effect of montmorillonite on the morphology, crystalline structure, isothermal crystallization kinetics and mechanical properties
48
Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)
49
Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior
50
Poly(butylene trisulfide)/CNT nanocomposites: synthesis and effect of CNT content on thermal properties
51
Poly(ϵ-caprolactone)-poly(fluoroalkylene oxide)-poly(ϵ-caprolactone) block copolymers. 2. Thermal and surface properties
52
Poly(catechol) electroactive film and its electrochemical properties
53
Poly(catechol) Film Modified Glassy Carbon Electrode for Ultratrace Determination of Cerium(III) by Differential Pulse Anodic Stripping Voltammetry
54
Poly(catechol) Film Modified Glassy Carbon Electrode for Ultratrace Determination of Cerium(III) by Differential Pulse Anodic Stripping Voltammetry
55
Poly(crotonic acid-co-2-acrylamido-2-methyl-1-propanesulfonic acid)–metal complexes with copper(II), cobalt(II), and nickel(II): Synthesis, characterization and antimicrobial activity
56
Poly(cyanoacetylene): a conjugated polymer with a rich phase diagram
57
Poly-(cyclo)dextrins as ethoxzolamide carriers in ophthalmic solutions and in contact lenses
58
Poly(cyclodiborazane)s
59
Poly(cyclooctene)-based monolithic columns for capillary high performance liquid chromatography prepared via ring-opening metathesis polymerization
60
Poly(cyclopentadienylene vinylene)s: synthesis via ROMP, chemical and physical properties
61
Poly(cytidylic acid) and poly(adenylic acid) analogues: synthesis and catalytic activity for hydrolysis of dinucleotides and nucleic acids
62
Poly(d,l-lactic acid) and chitosan complexes: interactions with plasmid DNA
63
Poly(D,L-lactide) (PDLLA) foams with TiO2 nanoparticles and PDLLA/TiO2-Bioglass R foam composites for tissue engineering scaffolds
64
Poly(d,l-lactide)/poly(methyl methacrylate) interpenetrating polymer networks: Synthesis, characterization, and use as precursors to porous polymeric materials
65
Poly(d,l-lactide-co-glycolide) coated superparamagnetic iron oxide nanoparticles: Synthesis, characterization and in vivo study as MRI contrast agent
66
Poly(D,L-lactide-co-glycolide)/hydroxyapatite core–shell nanosphere. Part 2: Simultaneous release of a drug and a prodrug (clindamycin and clindamycin phosphate)
67
Poly(d,l-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 1: A multifunctional system for controlled drug delivery
68
Poly(d,l-lactide-co-glycolide)/hydroxyapatite core–shell nanospheres. Part 3: Properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite
69
Poly(d,l-lactide-co-glycolide)/hydroxyapatite core–shell nanospheres. Part 4: A change of the surface properties during degradation process and the corresponding in vitro cellular response
70
Poly(d,l-lactide-co-glycolide)/montmorillonite nanoparticles for oral delivery of anticancer drugs
71
Poly(d,l-lactide-ran-ε-caprolactone)-poly(ethylene glycol)-poly(d,l-lactide-ran-ε-caprolactone) as parenteral drug-delivery systems
72
Poly(di-1H,1H,2H,2H-perfluoroalkylitaconate) films: surface organisation phenomena, surface energy determinations and force of adhesion measurements
73
Poly-(Dianix Blue) Modified Glassy Carbon Electrode as an Electrochemical Sensor for Simultaneous Determination of Levodopa, Ascorbic and Uric Acids
74
Poly(dibenzo[a,c]phenazine-2,7-diyl)s – Synthesis and characterisation of a new family of electron-accepting conjugated polymers
75
Poly(dibenzylidene)tetrathiapentalene: in situ ESR and conductivity measurements
76
Poly(dibenzylidenetetrathiapentalene): a novel, linearly extended tetrathiafulvalene polymer
77
Poly(dicarbazole-N-hydroxysuccinimide) film: a new polymer for the reagentless grafting of enzymes and redox mediators
78
Poly(dimethyl siloxane) surface modification by low pressure plasma to improve its characteristics towards biomedical applications
79
Poly(dimethyl siloxane) thin film composite membranes for propylene separation from nitrogen
80
Poly(dimethylaminoethyl methacrylate) grafted natural rubber from seeded emulsion polymerization
81
Poly(dimethylsiloxane) (PDMS)-Schiff base, a new polymeric network and its adsorbent capability for copper ions from ethanol
82
Poly(dimethylsiloxane) elastomers with tethered peptide ligands for cell adhesion studies
83
Poly(dimethylsiloxane) microchip-based immunoassay with multiple reaction zones: Toward on-chip multiplex detection platform
84
Poly(dimethylsiloxane) networks modified with poly(phenylsilsesquioxane)s: Synthesis, structural characterisation and evaluation of the thermal stability and gas permeability
85
Poly(dimethylsiloxane)-polyimide blends in the formation of thick polyimide films
86
Poly(dimethylsiloxane-urethane) membranes: Effect of hard segment in urethane on gas transport properties
87
Poly(dithienylidene)tetrathiapentalene: In situ esr and conductivity measurements
88
Poly(dithienylidenetetrathiapentalene): a novel, highly conducting polymer
89
Poly(dithiotriethylene adipate): Melting behavior, crystallization kinetics and morphology
90
Poly(divinylbenzene-alkyl methacrylate) monolithic stationary phases in capillary electrochromatography
91
Poly(dl-lactic acid)/triblock PCL–PDMS–PCL copolymers: synthesis, characterization and demonstration of their cell growth effects in vitro
92
Poly(dopamine) coating of scaffolds for articular cartilage tissue engineering
93
Poly(ɛ-caprolactone) acrylates synthesized using a facile method for fabricating networks to achieve controllable physicochemical properties and tunable cell responses
94
Poly(ɛ-caprolactone) based nanocomposites reinforced by surface-grafted cellulose nanowhiskers via extrusion processing: Morphology, rheology, and thermo-mechanical properties
95
Poly(ɛ-caprolactone) modified with fusion protein containing self-assembled hydrophobin and functional peptide for selective capture of human blood outgrowth endothelial cells
96
Poly(ɛ-caprolactone), Eudragit® RS 100 and poly(ɛ-caprolactone)/Eudragit® RS 100 blend submicron particles for the sustained release of the antiretroviral efavirenz
97
Poly(ɛ-caprolactone)-block-polystyrene metallopolymers via sequential ROP and ATRP condition with in situ generated ruthenium catalyst
98
Poly(epsilon-caprolactone)/clay nanocomposites via “click” chemistry
99
Poly(ester amide)s derived from 1,4-butanediol, adipic acid and 1,6-aminohexanoic acid: characterization and degradation studies
100
Poly(ester amide)s derived from 1,4-butanediol, adipic acid and 6-aminohexanoic acid. Part II: composition changes and fillers
101
Poly(ester imide)s possessing low coefficients of thermal expansion (CTE) and low water absorption (III). Use of bis(4-aminophenyl)terephthalate and effect of substituents
102
Poly(ester sulphonic acid) coated mercury thin film electrodes: characterization and application in batch injection analysis stripping voltammetry of heavy metal ions
103
Poly(ester-siloxane)urethane network structure from tensile properties
104
Poly(ether ester amide)s for tissue engineering
105
Poly(ether ether ketone) with pendent methyl groups as a toughening agent for amine cured DGEBA epoxy resin
106
Poly(ether ether ketone)/poly(aryl ether sulphone) blends: thermal degradation behaviour
107
Poly(ether sulfone) membranes with photo-responsive permeability
108
Poly(ether) dendrons possessing phosphine focal points for stabilization and reduced quenching of luminescent quantum dots
109
Poly(ether-block-amide) membrane for pervaporative separation of pyridine present in low concentration in aqueous solution
110
Poly(ether–ester)s modified with different amounts of fumaric moieties
111
Poly(etheretherketone)-turnings a novel sorbent material for lead determination by flow injection flame atomic absorption spectrometry and factorial design optimization
112
Poly(etherimide)/montmorillonite nanocomposites prepared by melt intercalation: morphology, solvent resistance properties and thermal properties
113
Poly(ethoxy) anionic surfactants: micellization and adsorption at the solid/liquid interface
114
Poly(ethoxytriethyleneglycol acrylate) cryogels as novel sustained drug release systems for oral application
115
Poly(ethyl acrylate) surface-initiated ATRP grafting from wood pulp cellulose fibers
116
Poly(ethyl acrylate) surface-initiated ATRP grafting from wood pulp cellulose fibers
117
Poly(ethyl methacrylate) and poly(2-ethoxyethyl methacrylate) based polymer gel electrolytes
118
Poly(ethyl methacrylate-co-hydroxyethyl acrylate) random co-polymers: Dielectric and dynamic-mechanical characterization
119
Poly(ethylene 2,6-naphthalate)/layered silicate nanocomposites: fabrication, crystallization behavior and properties
120
Poly(ethylene chlorotrifluoroethylene) membrane formation via thermally induced phase separation (TIPS)
121
Poly(ethylene glycol) (PEG) as an efficient and recyclable reaction medium for the synthesis of dibenz[b,f]-1,4-oxazepine
122
Poly(ethylene glycol) analogs grafted with low molecular weight poly(ethylene imine) as non-viral gene vectors
123
Poly(ethylene glycol) and poly(dimethyl siloxane): Combining their advantages into efficient CO2 gas separation membranes
124
Poly(ethylene glycol) as a ‘green solvent’ for the RAFT polymerization of methyl methacrylate
125
Poly(ethylene glycol) as solvent and polymer support in the microwave assisted parallel synthesis of aminoacid derivatives
126
Poly(ethylene glycol) as solvent and polymer support in the microwave assisted parallel synthesis of aminoacid derivatives
127
Poly(ethylene glycol) as solvent and polymer support in the microwave assisted parallel synthesis of aminoacid derivatives
128
Poly(ethylene glycol) decorated poly(methylmethacrylate) nanoparticles for protein adsorption
129
Poly(ethylene glycol) dicarboxylate/poly(ethylene oxide) hydrogel film co-crosslinked by electron beam irradiation as an anti-adhesion barrier
130
Poly(ethylene glycol) grafted polystyrene dendrimer resins: Novel class of supports for solid phase peptide synthesis
131
Poly(ethylene glycol) haired layered double hydroxides as biocompatible nanovehicles: Morphology and dispersity study
132
Poly(ethylene glycol) hydrogel microparticles containing enzyme-fluorophore conjugates for the detection of organophosphorus compounds
133
Poly(ethylene glycol) hydrogels conjugated with a collagenase-sensitive fluorogenic substrate to visualize collagenase activity during three-dimensional cell migration
134
Poly(ethylene glycol) methacrylate hydrolyzable microspheres for transient vascular embolization
135
Poly(ethylene glycol) modified activated carbon for high performance proton exchange membrane fuel cells
136
Poly(ethylene glycol) plasticized poly(vinyl alcohol)/poly(acrylamide-co-diallyldimethylammonium chloride) as alkaline anion-exchange membrane for potential fuel cell applications
137
Poly(ethylene glycol) Prodrugs of the CDK Inhibitor, Alsterpaullone (NSC 705701): Synthesis and Pharmacokinetic Studies
138
Poly(ethylene glycol) shell-sheddable magnetic nanomicelle as the carrier of doxorubicin with enhanced cellular uptake
139
Poly(ethylene glycol) shell-sheddable nanomicelle prodrug of camptothecin with enhanced cellular uptake
140
Poly(ethylene glycol)-based ammonium ionenes containing nucleobases
141
Poly(ethylene glycol)-based aqueous biphasic systems: effect of temperature on phase equilibria and on partitioning of 1,10-phenanthroline–copper(II) sulphate complex
142
Poly(ethylene glycol)-based magnetic hydrogel nanocomposites for hyperthermia cancer therapy
143
Poly(ethylene glycol)–carboxymethyl chitosan-based pH-responsive hydrogels: photo-induced synthesis, characterization, swelling, and in vitro evaluation as potential drug carriers Original Research Article
144
Poly(ethylene glycol)-cross linked poly(methyl vinyl ether-co-maleic acid)hydrogels for three-dimensional human ovarian cancer cell culture
145
Poly(ethylene glycol)-crosslinked N-methylene phosphonic chitosan. Preparation and characterization
146
Poly(ethylene glycol)–poly( -lactide) diblock copolymer prevents aggregation of poly( -lactide) microspheres during ethylene oxide gas sterilization
147
Poly(ethylene glycol)-poly(epsilon-caprolactone) block oligomers as injectable materials
148
Poly(ethylene glycol)-poly(ε-caprolactone)-based micelles for solubilization and tumor-targeted delivery of silibinin
149
Poly(ethylene glycol)s 2000–8000 in water may be planar: A small-angle neutron scattering (SANS) structure study
150
Poly(ethylene glycol)s catalyzed homogeneous dehydrochlorination of poly(vinyl chloride) with potassium hydroxide
151
Poly(ethylene glycol)-supported copper(II) triazacyclononane: an efficient, recoverable, and recyclable catalyst for the cleavage of a phosphodiester
152
Poly(ethylene glycol)-Supported Enzyme Inactivators. Efficient Identification of the Site of Covalent Attachment to (alpha)-Chymotrypsin by PEG-TPCK
153
Poly(ethylene glycol)-supported α,α,α-trifluoroacetophenone in dioxirane mediated alkene epoxidation reactions
154
Poly(ethylene imine) hybrids containing polyhedral oligomeric silsesquioxanes: Preparation, structure and properties
155
Poly(ethylene isophthalate)s: effect of the tert-butyl substituent on structure and properties
156
Poly(ethylene oxide) and its blends with sodium alginate
157
Poly(ethylene oxide) blends with poly(ethylene oxide)/poly(dicyclohexyl itaconate) block copolymers
158
Poly(ethylene oxide) crystallization in single walled carbon nanotube based nanocomposites: Kinetics and structural consequences
159
Poly(ethylene oxide) electrolytes containing mixed-alkali metal perchlorates
160
Poly(ethylene oxide) electrolytes containing mixed-alkali metal perchlorates
161
Poly(ethylene oxide) induced cross-linking modification of Matrimid membranes for selective separation of CO2
162
Poly(ethylene oxide)/clay nanocomposite: Thermomechanical properties and morphology
163
Poly(ethylene oxide)/Laponite nanocomposites via melt-compounding: effect of clay modification and matrix molar mass
164
Poly(ethylene oxide)/NH4+-smectite nanocomposites
165
Poly(ethylene oxide)/poly(butylene terephthalate) segmented block copolymers: the effect of copolymer composition on physical properties and degradation behavior
166
Poly(ethylene oxide)/poly(propylene oxide) block copolymer surfactants
167
Poly(ethylene oxide)/polybutadiene based IPNs synthesis and characterization
168
Poly(ethylene oxide)-based polymer electrolyte incorporating room-temperature ionic liquid for lithium batteries
169
Poly(ethylene oxide)-block-poly(l-amino acid) micelles for drug delivery
170
Poly(ethylene oxide)-bonded stationary phase for separation of inorganic anions in capillary ion chromatography
171
Poly(ethylene oxide)–Poly(propylene oxide)-Based Copolymers for Transdermal Drug Delivery: An Overview
172
Poly(ethylene oxide)–poly(propylene oxide)–poly(ethyl oxide) enhancing capacitance behavior of composite electrode material poly(o-phenylenediamine)/manganese dioxide for supercapacitor
173
Poly(ethylene oxide)–polyurethane/poly(acrylonitrile) semi-interpenetrating polymer networks for solid polymer electrolytes: vibrational spectroscopic studies in support of electrical behavior
174
Poly(ethylene oxide-co-epichlorohydrin) membranes for carbon dioxide separation
175
Poly(ethylene oxide-co-epichlorohydrin)/NaI: a promising polymer electrolyte for photoelectrochemical cells
176
Poly(ethylene terephthalate) (PET) degradation during the Zn catalysed transesterification with dibutyl maleate functionalized polyolefins
177
Poly(ethylene terephthalate) clay nanocomposites: Improved dispersion based on an aqueous ionomer
178
Poly(ethylene terephthalate) copolymers containing 1,4-cyclohexane dicarboxylate units
179
Poly(ethylene terephthalate) ionomer based clay nanocomposites produced via melt extrusion
180
Poly(ethylene terephthalate) nanocomposites by in situ interlayer polymerization: the thermo-mechanical properties and morphology of the hybrid fibers
181
Poly(ethylene terephthalate) nanofibers prepared by CO2 laser supersonic drawing
182
Poly(ethylene terephthalate) nanosheets prepared by CO2-laser supersonic multi-drawing
183
Poly(ethylene terephthalate) surface and alumina/poly(ethylene terephthalate) interface studied using sum-frequency generation spectroscopy
184
Poly(ethylene terephthalate) surface modification by deep UV (172 nm) irradiation
185
Poly(ethylene) cable sheathing failure
186
Poly(ethylene-2,6-naphthalate) microfiber prepared by carbon dioxide laser-thinning method
187
Poly(ethylene-co-butylene) functionalized multi walled carbon nanotubes applied in polypropylene nanocomposites
188
Poly(ethylene-co-tetrafluoroethylene) (ETFE)-based graft-type polymer electrolyte membranes with different ion exchange capacities: Relative humidity dependence for fuel cell applications
189
Poly(ethylene-co-vinyl acetate) (EVA) as wax inhibitor of a Brazilian crude oil: oil viscosity, pour point and phase behavior of organic solutions
190
Poly(ethylene-co-vinyl acetate) copolymer matrix for delivery of chlorhexidine and acyclovir drugs for use in the oral environment: Effect of drug combination, copolymer composition and coating on the drug release rate
191
Poly(ethylene-co-vinyl acetate-g-styrene) from macro-transfer agent: synthesis and use in polymer blend
192
Poly(ethylene-co-vinyl alcohol) and poly(methyl methacrylate) blends: Phase behavior and morphology
193
Poly(ethylene-co-vinyl alcohol) membranes with specific adsorption properties for potential clinical application Original Research Article
194
Poly(ethyleneglycol methacrylate phosphate) and heterocycle based proton conducting composite materials
195
Poly(ethyleneglycol) (PEG): a rapid and recyclable reaction medium for the DABCO-catalyzed Baylis–Hillman reaction
196
Poly(ethyleneglycol) column for the determination of acetaminophen, phenylephrine and chlorpheniramine in pharmaceutical formulations
197
Poly(ethylene-glycol)-based fluorinated esters: a readily available entry for novel 19F-MRI agents
198
Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions
199
Poly(ethyleneimine) cross-linked multilayers deposited onto solid surfaces and enzyme immobilization as a function of the film properties
200
Poly(ethyleneimine) functionalized carbon nanotubes as efficient nano-vector for transfecting mesenchymal stem cells
201
Poly(ethyleneimine) infused and functionalized Torlon®-silica hollow fiber sorbents for post-combustion CO2 capture
202
Poly(ethyleneimine) nanofibrous affinity membrane fabricated via one step wet-electrospinning from poly(vinyl alcohol)-doped poly(ethyleneimine) solution system and its application
203
Poly(ethylene-oxide)/clay/silica nanocomposites: Morphology and thermomechanical properties
204
Poly(ethylenimine)-mediated gene delivery affects endothelial cell function and viability
205
Poly(ferrocenyldimethylsilane-b-dimethylsiloxane) microsphere with shell thickness controllable structure prepared through self-assembly
206
Poly(fluorene)s and poly(p-phenylene)s with pyrenyltriazine segments: synthesis and photophysics
207
Poly(fluorene-oxadiazole) copolymer-based light-emitting devices on a plastic substrate
208
Poly(fluoroalkylsilane-b-dialkylsilane)-based chemosensory material for fluoride with high sensitivity, selectivity and solubility
209
Poly(furfuryl alcohol)-assisted pyrolysis synthesis of ceramic nanoparticles for solid oxide fuel cells
210
Poly(germaniumpolycarbodiimides)
211
Poly(glycidyl methacrylate) beads embedded cryogels for pseudo-specific affinity depletion of albumin and immunoglobulin G
212
Poly(glycidyl methacrylate) grafted CdSe quantum dots by surface-initiated atom transfer radical polymerization: Novel synthesis, characterization, properties, and cytotoxicity studies
213
Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)/clay composites
214
Poly(glycidyl methacrylate–divinylbenzene–triallylisocyanurate) continuous-bed protein chromatography
215
Poly(glycidylmethacrylate) brushes generated on poly(VBC) beads by SI-ATRP technique: Hydrazine and amino groups functionalized for invertase adsorption and purification
216
Poly(glycidylmethacrylate-co-vinyl ferrocene)-grafted iron oxide nanoparticles as an electron transfer mediator for amperometric phenol detection
217
Poly(glycoamidoamine)s: a broad class of carbohydrate-containing polycations for nucleic acid delivery
218
Poly(hexamethylene terephthalate)–layered silicate nanocomposites
219
Poly(hexamethylene terephthalate-co-caprolactone) copolymers: Influence of cycle size on ring-opening polymerization
220
Poly(hydroethyl acrylate) grafted from ZnO nanoparticles via surface-initiated atom transfer radical polymerization
221
Poly(hydroethyl acrylate) grafted from ZnO nanoparticles via surface-initiated atom transfer radical polymerization
222
Poly(hydroxyalkanoates) for Food Packaging: Application and Attempts towards Implementation
223
Poly(hydroxybutyrate) and epichlorohydrin elastomers blends: Phase behavior and morphology
224
Poly(hydroxybutyrate)/poly(butylene succinate) blends: miscibility and nonisothermal crystallization
225
Poly(hydroxybutyrate-co-hydroxyhexanoate) promoted production of extracellular matrix of articular cartilage chondrocytes in vitro
226
Poly(hydroxyether of bisphenol A)-block-polydimethylsiloxane alternating block copolymer and its nanostructured blends with epoxy resin
227
Poly(hydroxyether sulfone) and its blends with poly(ethylene oxide): miscibility, phase behavior and hydrogen bonding interactions
228
Poly(hydroxyether terephthalate ester): Synthesis, characterization and competitive specific interactions in mixtures with poly(ethylene oxide)
229
Poly(hydroxyethyl acrylate-co-coumaryl acrylate) as a photo-responsive amphiphile
230
Poly(hydroxyethyl methacrylate) based magnetic nanoparticles for plasmid DNA purification from Escherichia coli lysate
231
Poly(hydroxyethyl methacrylate) nanobeads containing imidazole groups for removal of Cu(II) ions
232
Poly(hydroxyethyl methacrylate-co-methacrylated-β-cyclodextrin) hydrogels: Synthesis, cytocompatibility, mechanical properties and drug loading/release properties
233
Poly(hydroxyethyl methacrylate-co-methacryloylamidotryptophane) nanospheres and their utilization as affinity adsorbents for porcine pancreas lipase adsorption
234
Poly(imide benzimidazole)s for high temperature polymer electrolyte membrane fuel cells
235
Poly(imide siloxane) and carbon nanotube mixed matrix membranes for gas separation Original Research Article
236
Poly(imide–amide)–poly(ethylene adipate) hybrid networks. I. Nanostructure and segmental dynamics
237
Poly(imide–amide)–poly(ethylene adipate) hybrid networks. II. Dielectric studies
238
Poly(indenofluorene)s (PIF) — Novel conjugated pojyhydrocarbon polymers
239
Poly(ionic liquid) colloidal particles
240
Poly(ionic liquid) nanoparticles as novel colloidal template for silica nanocasting
241
Poly(ionic liquid)-derived nanoporous carbon analyzed by combination of gas physisorption and small-angle neutron scattering
242
Poly(ionic liquid)s: a new material with enhanced and fast CO2 absorption
243
Poly(ionic liquid)s: Polymers expanding classical property profiles
244
Poly(isonicotinic acid) modified glassy carbon electrode for electrochemical detection of norepinephrine Original Research Article
245
Poly(isophthalamide) based graft copolymer for the modification of cellulose acetate ultrafiltration membranes and a fouling study by AFM imaging
246
Poly(isothianaphthene methine)s with liquid crystalline substituents
247
Poly(itaconates) monolayers behavior at the air/water interface. Study at different surface concentration
248
Poly(lactic acid) (PLA) Nanofibers for Bone Tissue Engineering
249
Poly(lactic acid) fiber: An overview
250
Poly(lactic acid) film incorporated with marigold flower extract (Tagetes erecta) intended for fatty-food application
251
Poly(lactic acid) nanocomposites: comparison of their properties with montmorillonite and synthetic mica (II)
252
Poly(lactic acid) porous scaffold with calcium phosphate mineralized surface and bone marrow mesenchymal stem cell growth and differentiation
253
Poly(lactic acid)/Biodegradable Polymer Blend for The Preparation of Flat-Sheet Membrane
254
Poly(lactic acid)/carbon nanotube nanocomposites with integrated degradation sensing
255
Poly(lactic acid)/chitosan hybrid nanoparticles for controlled release of anticancer drug
256
Poly(lactic acid)/clay nanocomposites: effect of nature and content of clay on morphology, thermal and thermo-mechanical properties
257
Poly(lactic acid)/natural rubber/cellulose nanocrystal bionanocomposites Part I. Processing and morphology
258
Poly(lactic acid)/natural rubber/cellulose nanocrystal bionanocomposites. Part II: Properties evaluation
259
Poly(lactic acid)/N-maleoylchitosan core–shell capsules: Preparation and drug release properties
260
Poly(lactic acid)/poly(vinyl pyrrolidone) blend membranes: Effect of membrane composition on pervaporation separation of ethanol/cyclohexane mixture
261
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
262
Poly(lactic acid)–multi-wall carbon nanotube conductive biopolymer nanocomposite vapour sensors
263
Poly(lactic acid-co-glycolic acid)–poly(ethylene glycol)–poly(lactic acid-co-glycolic acid) thermogel as a novel submucosal cushion for endoscopic submucosal dissection
264
Poly(lactic-co-glycolic acid) electrospun fibrous meshes for the controlled release of retinoic acid
265
Poly(lactic-co-glycolic acid) nanoparticles as candidate DNA vaccine carrier for oral immunization of Japanese flounder (Paralichthys olivaceus) against lymphocystis disease virus
266
Poly(lactic–co-glycolic acid): Carbon nanofiber composites for myocardial tissue engineering applications
267
Poly(lactic-co-glycolic) acid drug delivery systems through transdermal pathway: an overview
268
Poly(lactide-co-glycolide) encapsulated hydroxyapatite microspheres for sustained release of doxycycline
269
Poly(lactide-co-glycolide) microspheres as a moldable scaffold for cartilage tissue engineering
270
Poly(lactide-co-glycolide) nanoparticles as carriers for norcantharidin
271
Poly(lactide-co-glycolide) nanoparticles for peroral delivery of bioactives
272
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
273
Poly(lactide-co-glycolide)/hydroxyapatite delivery of BMP-2-producing cells: a regional gene therapy approach to bone regeneration
274
Poly(lactide-co-glycolide)/silver nanoparticles: Synthesis, characterization, antimicrobial activity, cytotoxicity assessment and ROS-inducing potential
275
Poly(l-aspartic acid) derivative soluble in a volatile organic solvent for biomedical application
276
Poly(l-aspartic acid) nanogels for lysosome-selective antitumor drug delivery
277
Poly(lauryl acrylate) and poly(stearyl acrylate) grafted multiwalled carbon nanotubes for polypropylene composites
278
Poly(l-glutamic acid)/chitosan polyelectrolyte complex porous microspheres as cell microcarriers for cartilage regeneration
279
Poly(l-glutamic acid)–anticancer drug conjugates
280
Poly(l-glutamic acid)-based star-block copolymers as pH-responsive nanocarriers for cationic drugs
281
Poly(l-lactic acid) nonwoven fabric prepared by carbon dioxide laser-thinning method
282
Poly(l-lactic acid) short fibers prepared by solvent evaporation using sodium tripolyphosphate
283
Poly(l-lactic acid)/organically modified vermiculite nanocomposites prepared by melt compounding: Effect of clay modification on microstructure and thermal properties
284
Poly(l-lactic acid)/SiO2 nanocomposites via in situ melt polycondensation of l-lactic acid in the presence of acidic silica sol: Preparation and characterization
285
Poly(l-lactide acid) composites containing needlelike fibers assembled by C60 with improved crystallization and thermal properties
286
Poly(l-lactide) and poly(butylene succinate) immiscible blends: From electrospinning to biologically active materials
287
Poly(l-lactide) brushes on magnetic multiwalled carbon nanotubes by in-situ ring-opening polymerization
288
Poly(l-lactide) comb polymer brushes on the surface of clay layers
289
Poly(l-lactide) microspheres with controlled crystallinity
290
Poly(l-lactide) stabilized gold nanoparticles based QCM sensor for low humidity detection
291
Poly(l-lactide)/nano-structured carbon composites: Conductivity, thermal properties, crystallization, and biodegradation
292
Poly(l-lactide)/starch blends compatibilized with poly(l-lactide)-g-starch copolymer
293
Poly(l-lactide): 7. Enzymatic hydrolysis of free and restricted amorphous regions in poly(l-lactide) films with different crystallinities and a fixed crystalline thickness
294
Poly(l-lactide-co-2-(2-methoxyethoxy)ethyl methacrylate): A biodegradable polymer with protein resistance
295
Poly(l-lactide-co-ɛ-caprolactone) electrospun nanofibers for encapsulating and sustained releasing proteins
296
Poly(l-lactide-co-glycolide) biodegradable microfibers and electrospun nanofibers for nerve tissue engineering: an in vitro study
297
Poly(l-lysine)-based star-block copolymers as pH-responsive nanocarriers for anionic drugs
298
Poly(L-lysine)-modified silica nanoparticles for the delivery of antisense oligonucleotides
299
Poly(l-proline) interactions with flavan-3-ols units: Influence of the molecular structure and the polyphenol/protein ratio
300
Poly(luminol) based sensor array for determination of dissolved chlorine in water
301
Poly(MAA-co-AN) hydrogels with improved mechanical properties for theophylline controlled delivery
302
Poly(MAA-PEGMA)-coated superparamagnetic nanoparticles-based magnetic affinity immunoassay for detection of interleukin-6
303
Poly(malachite green) at nafion doped multi-walled carbon nanotube composite film for simple aliphatic alcohols sensor
304
Poly(malachite green) film: Electrosynthesis, characterization, and sensor application
305
Poly(maleic acid) Modified Carbon Paste Electrode for Simultaneous Detection of Dopamine in the Presence of Uric Acid : A Cyclic Voltammetric Study
306
Poly(meth)acrylate grafted EPDM via reverse atom transfer radical polymerization: A single pot process
307
Poly(methacrylic acid) enhances emission of dye stain extracted from bacterial spores: Fluorimetric quantitation in aqueous samples
308
Poly(methacrylic acid-co-ethylene glycol dimethacrylate) monolith microextraction coupled with high performance liquid chromatography for the determination of phthalate esters in cosmetics Original Research Article
309
Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid phase microextraction coupled to high performance liquid chromatography and analysis of amphetamines in urine samples
310
Poly(methyl acrylate-co-sodium methacrylate) ionomer studied by solid state 13C T1ρ NMR
311
Poly(methyl methacrylate) (core)–biosurfactant (shell) nanoparticles: Size controlled sub-100 nm synthesis, characterization, antibacterial activity, cytotoxicity and sustained drug release behavior
312
Poly(methyl methacrylate) composites prepared by in situ polymerization using organophillic nano-to-submicrometer zinc oxide particles
313
Poly(methyl methacrylate) microchip device integrated with gold nanoelectrode ensemble for in-column biochemical reaction and electrochemical detection
314
Poly(methyl methacrylate) nanobrushes on silicon based on localized surface-initiated polymerization
315
Poly(methyl methacrylate)/clay nanocomposites by photoinitiated free radical polymerization using intercalated monomer
316
Poly(methyl methacrylate)/layered zinc sulfide nanocomposites: Preparation, characterization and the improvements in thermal stability, flame retardant and optical properties
317
Poly(methyl methacrylate)/polyacrylonitrile composite latex particles with a novel surface morphology
318
Poly(methyl methacrylate-co-butyl acrylate)/ Organophosphate-modified Montmorillonite Composites
319
Poly(methylene blue) functionalized graphene modified carbon ionic liquid electrode for the electrochemical detection of dopamine Original Research Article
320
Poly(methylene blue) modified electrode sensor for haemoglobin Original Research Article
321
Poly(methylmetacrylate) (PMMA) core–shell nanospheres act as efficient pharmacophores for the antiproliferative [PtCl3(NH3)]− complex by forming ionic couples
322
Poly(methylmethacrylate) as immobilization matrix for europium β-diketonates—Morphology and fluorescent properties
323
Poly(methylmethacrylate)-silica nanocomposites films from surface-functionalized silica nanoparticles
324
Poly(methylmethacrylate-dimethylsiloxane) triblock copolymers synthesized by transition metal mediated living radical polymerization: bulk and surface characterization
325
Poly(methyloctadecylsiloxane) immobilized on silica by γ radiation for use in solid-phase extraction
326
Poly(methyloctylsiloxane) immobilized on silica as a sorbent for solid-phase extraction of some pesticides
327
Poly(methylpropenoxyfluoroalkylsiloxane)s: a class of fluoropolymers capable of inhibiting bacterial adhesion onto surfaces
328
Poly(methyltetradecylsiloxane) immobilized onto silica for extraction of multiclass pesticides from surface waters Original Research Article
329
Poly(m-phenylenediamine)–Prussian blue hybrid film formed by one-step electrochemical deposition for glucose biosensor
330
Poly(N -bromo-N-ethyl-benzene-1,3-disulfonamide), N,N,Nʹ,Nʹ-Tetrabromobenzene-1,3-disulfonamide as New Efficient Reagents for Conversion of Alcohols to THP Ethers and Aldehydes to Oxazoline Compounds
331
Poly(N- bromosuccinimide) (PNBS) as a mild, efficient, non-acidic, polymeric and heterogeneous catalyst applied for easy conversion of epoxides into thiiranes by treatment with KSCN or (NH.), CS at room temperature
332
Poly(N- bromosuccinimide) (PNBS) as a mild, efficient, non-acidic, polymeric and heterogeneous catalyst applied for easy conversion of epoxides into thiiranes by treatment with KSCN or (NH2)2CS at room temperature
333
Poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide), N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide and novel poly(N,N′-dibromo-N-phenylbenzene-1,3-disulfonamide) as powerful reagents for benzylic bromination
334
Poly(N,Nʹ-dibromo-N-ethyl-benzene-1,3-disulfonamide) and N,N,Nʹ,Nʹ- Tetrabromobenzene-1,3-disulfonamide as Effective Catalysts for Conversion of Aldehydes to 1,1-Diacetates and Acetals
335
Poly(N,Nʹ-dichloro-N-ethyl-benzene-1,3-disulfonamide, N,N,Nʹ,Nʹ-tetrachlorobenzene-1,3-disulfonamide, Poly(N,Nʹ-dibromo-N-ethyl-benzene-1,3-disulfonamide, and N,N,Nʹ,Nʹ-Tetrabromobenzene-1,3-disulfonamide Catalyzed Formylation of Amines and Alcohols Using
336
Poly(N,N-dimethylaminoethyl methacrylate) modification of activated carbon for copper ions removal
337
Poly(N,N-dimethylaminoethyl methacrylate)/polysulfone composite membranes for gas separations
338
Poly(N,N-dimethylaminoethyl methacrylate)–poly(ethylene oxide) copolymer membranes for selective separation of CO2
339
Poly(naphthylenethiophene)s and poly(naphthylenevinylenephenylenevinylene)s: effect of naphthalene positional isomers on the light emitting properties of their polymers
340
Poly(N-bromoacrylamide): an Efficient and Useful Catalyst for the Protection of Carbonyl Compounds as Dithiolanes, Dithianes and Oxathiolanes under Solvent-Free and Microwave Conditions
341
Poly(N-bromobenzene-1,3-disulfonamide) and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide as novel catalytic reagents for silylation of alcohols, phenols, and thiols using hexamethyldisilazane
342
Poly(N-bromo-N-ethylbenzene-1,3-disulfonamide) and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide as efficient reagents for synthesis of quinolines
343
Poly(n-butyl acrylate) based lead (II) selective electrodes
344
Poly(n-butyl acrylate)/Poly(vinyl acetate-co-methyl methacrylate) Structural Rubber Latex Particles as Impact Modifier for Unsaturated Polyester Resin: Preparation and Characterization
345
Poly(n-butyl cyanoacrylate) nanoparticles via miniemulsion polymerization (1): Dextran-based surfactants
346
Poly(n-butyl cyanoacrylate) nanoparticles via miniemulsion polymerization. 2. PEG-based surfactants
347
Poly(n-butyl methacrylate) end-capped polyrotaxanes via ATRP initiated with α-cyclodextrin and Pluronic 17R4 based inclusion complexes
348
Poly(N-ethyl-4-vinylpyridinium bromide)–sodium dodecyl sulfate complexes. Formation and supramolecular organization in salt containing aqueous solutions
349
Poly(N-ethyl-4-vinylpyridinium) bromide as a potential probe to select heparin-like anticoagulant polyanions
350
Poly(Niacin) Based Carbon Nanotube Sensor for the Sensitive and Selective Voltammetric Detection of Vanillin with Caffeine
351
Poly(N-isopropylacrylamide) (PNIPAM)-grafted gelatin hydrogel surfaces: interrelationship between microscopic structure and mechanical property of surface regions and cell adhesiveness
352
Poly(N-isopropylacrylamide) co-polymer films as potential vehicles for delivery of an antimitotic agent to vascular smooth muscle cells
353
Poly(N-isopropylacrylamide) grafted poly(vinylidene fluoride) copolymers for temperature-sensitive membranes
354
Poly(N-isopropylacrylamide) hydrogels with improved shrinking kinetics by RAFT polymerization
355
Poly(N-isopropylacrylamide) nanoparticles for QCM-based gas sensing of HCl
356
Poly(N-isopropylacrylamide) thermoresponsive cross-linked conjugates containing polymeric soybean oil and/or polypropylene glycol
357
Poly(N-isopropylacrylamide)/poly[(N-acetylimino)ethylene] thermosensitive block and graft copolymers
358
Poly(N-isopropylacrylamide)-block-poly(vinyl pyrrolidone) block copolymer networks: Synthesis and rapid thermoresponse of hydrogels
359
Poly(N-isopropylacrylamide)-graft-polypropylene membranes containing adsorbed antibody for cell separation
360
Poly(N-isopropylacrylamide-co-acrylamide) cross-linked thermoresponsive microspheres obtained from preformed polymers: Influence of the physico-chemical characteristics of drugs on their release profiles
361
Poly(N-isopropylacrylamide-co-acrylic acid) Hydrogel and Its Thermo-responsive Properties for Polymer Enhanced Ultrafiltration
362
Poly(N-isopropylacrylamide-co-N,N′-methylene bisacrylamide) monolithic column embedded with γ-alumina nanoparticles microextraction coupled with high-performance liquid chromatography for the determination of synthetic food dyes in soft drink samples
363
Poly(N-methyl pyrrole) and its copolymer with pyrrole for mild steel protection
364
Poly(N-methylaniline) microsphere formation and control of the average diameter by simple chemical polymerization
365
Poly(N-methylaniline)/nickel modified carbon paste electrode as an efficient and cheep electrode for electrocatalytic oxidation of formaldehyde in alkaline medium
366
Poly(N-octadecylaniline) Synthesis and Its Electrochemical Parametric Characterizations
367
Poly(norbornene)s as matrix materials for platinum tetrakis(pentafluorophenyl)porphyrin based optical oxygen sensors
368
Poly(N-phenylmaleimide)- and poly(N-biphenylmaleimide)-urethanes, functionalised with NLO-phores for second-order nonlinear optical applications
369
Poly(N-phenylmaleimides) bearing chiral oxazolinyl pendant: Supramolecular aggregation and enantioselectivity in fluorescence response
370
Poly(N-tert-butyl acrylamide-b-N-acryloylmorpholine) amphiphilic block copolymers via RAFT polymerization: Synthesis, purification and characterization
371
Poly(N-vinyl caprolactam) grown on nanographene oxide as an effective nanocargo for drug delivery
372
Poly(N-vinyl carbazole) and carbon nanotubes based composites and their application to rechargeable lithium batteries
373
Poly(N-vinyl carbazole)-functionalized single-walled carbon nanotubes: Synthesis, characterization, and nanocomposite thin films
374
Poly(N-vinyl carbazole)-grafted multiwalled carbon nanotubes: Synthesis via direct free radical reaction and optical limiting properties
375
Poly(N-vinyl α-amino acid) microspheres: a model—poly(N-vinyl α-phenyl alanine) microspheres: synthesis and characterization
376
Poly(N-vinyl-2-pyrrolidone) cluster-assembled nanostructured films prepared by low energy cluster beam deposition
377
Poly(N-vinyl-2-pyrrolidone) hydrogel production by ultraviolet radiation: new methodologies to accelerate crosslinking
378
Poly(N-vinyl-2-pyrrolidone) hydrogels produced by Fenton reaction
379
Poly(N-vinylcarbazole) (PVK) deposited by evaporation for light emitting diodes thin films structures
380
Poly(N-vinylcarbazole) and polypyrrole composites synthesized by laser-electrochemical polymerization
381
Poly(N-vinylguanidine): Characterization, and catalytic and bactericidal properties
382
Poly(N-vinylisobutyramide)-stabilized platinum nanoparticles: synthesis and temperature-responsive behavior in aqueous solution
383
Poly(N-vinylpyrrolidone)-grafted poly(N-isopropylacrylamide) copolymers: Synthesis, characterization and rapid deswelling and reswelling behavior of hydrogels
384
Poly(N-vinylpyrrolidone)-modified poly(dimethylsiloxane) elastomers as anti-biofouling materials
385
Poly(o-aminophenol) with two redox processes: A spectroelectrochemical study
386
Poly(O-anisidine) coatings electrodeposited onto AL-2024: Synthesis, characterization, and corrosion protection evaluation
387
Poly(o-anisidine) coatings on brass: Synthesis, characterization and corrosion protection
388
Poly(o-anisidine) coatings on copper: synthesis, characterization and evaluation of corrosion protection performance
389
Poly(O-anisidine) coatings on low carbon steel
390
Poly(O-anisidine) coatings on low carbon steel
391
Poly(o-anisidine)–anion composite films as sensing platform for biological molecules
392
Poly(o-anisidine)–polystyrene composite fibers via electrospinning process: Surface morphology and chemical vapor sensing
393
Poly(o-anisidine)–tin oxide nanocomposite: Synthesis, characterization and application to humidity sensing
394
Poly(octylmethylsiloxane)/oleyl alcohol supported liquid membrane for the pervaporative recovery of 1-butanol from aqueous and ABE model solutions
395
Poly(octyl-thiophene) polymorphs under high pressure: Synchrotron X-Rays studies and the relation with spectral behaviour
396
Poly(oligo(1-methylpyrrole))s and their squaraine-derivatives: an electrochemical and spectroelectrochemical investigation
397
Poly(o-methoxyaniline)–palladium systems: effect of preparation conditions on physico-chemical properties
398
Poly(o-phenylenediamine) and benzeneselenol copolymer fluorescent nanorod: An ultra-sensitive fluorescent probe and a fluorescent switch triggered by redox procedure
399
Poly(o-phenylenediamine) and benzeneselenol copolymer fluorescent nanorod: An ultra-sensitive fluorescent probe and a fluorescent switch triggered by redox procedure
400
Poly(o-phenylenediamine) as an inhibitor of mild steel corrosion in HCl solution
401
Poly(o-phenylenediamine) coatings on mild steel: Electrosynthesis, characterization and its corrosion protection ability in acid medium
402
Poly(o-phenylenediamine) ultra-thin polymer-film composite membranes for enzyme electrodes
403
Poly(o-phenylenediamine)/MWNTs composite film as a hole conductor in solid-state dye-sensitized solar cells
404
Poly(o-phenylenediamine)-carried nanogold particles as signal tags for sensitive electrochemical immunoassay of prolactin Original Research Article
405
Poly(organophosphazene)s and related compounds: Synthesis, properties and applications
406
Poly(ortho esters): synthesis, characterization, properties and uses
407
Poly(ortho-aminophenol)/graphene nanocomposite as an efficient supercapacitor electrode
408
Poly(o-toluidine) as the matrix for incorporation of palladium species from PdCl2 aqueous solutions
409
Poly(o-toluidine) for carbon fabric electrode modification to enhance the electrochemical capacitance and conductivity
410
Poly(o-toluidine) polymer as electrochromic material
411
Poly(O-Toluidine)/Zirconium-based nanocomposite ion-exchangers for Water treatment and environmental remediation
412
Poly(oxymethylene) dimethyl ethers as components of tailored diesel fuel: Properties, synthesis and purification concepts
413
Poly(oxypropylene)-amide grafted polypropylene as novel compatibilizer for PP and PA6 blends
414
Poly(p phenylene vinylene)/porous silicon composites
415
Poly(p phenylene vinylene)/porous silicon composites
416
Poly(p phenylene vinylene)/porous silicon light emitting diodes
417
Poly(Patton and Reederʹs reagent) modified carbon paste electrode for the sensitive detection of acetaminophen in biological fluid and pharmaceutical formulations
418
Poly(per)fluoroalkanesulfonyl fluoride promoted olefin epoxidation with 30% aqueous hydrogen peroxide
419
Poly(phenylacetylene) with bulky chiral germyl groups: synthesis and effects of measuring solvents and temperature on chiroptical properties
420
Poly(phenylene oxide) films modified with allylamine plasma as a support for invertase immobilization
421
Poly(phenylene oxides)s and poly(arylene ether)s derived from 2,6-diarylphenols
422
Poly(phenylene sulfide–phenyleneamine–phenyleneamine) (PPSAA)—a soluble model for polyaniline
423
Poly(phenylenebutadiynylene)s as an efficient carbonizing precursor
424
Poly(phenyleneethynylene) polymers bearing glucose substituents as promising active layers in enantioselective chemiresistors
425
Poly(phenylquinoxalines) by vapor deposition polymerization
426
Poly(phenylquinoxalines) for second-order nonlinear optical applications
427
Poly(phosphorhydrazone) metallodendrimers. A review
428
Poly(phthalazine ether sulfone ketone) as novel stationary phase for stir bar sorptive extraction of organochlorine compounds and organophosphorus pesticides
429
Poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber asymmetric nanofiltration membranes: Preparation, morphologies and properties
430
Poly(phthalidylidenarylene)s: new effects — new horizons of application
431
Poly(p-maleimidostyrene) as a macromolecule initiator for polymerization of styrene-type monomers – Synthesis of block copolymers containing poly(p-maleimidostyrene) with highly reactive pendent maleimido groups
432
Poly(p-phenylene ethynylene)-based light-emitting devices
433
Poly(p-phenylene vinylene) as active layer in light-emitting diodes: a theoretical investigation of the effects of derivatization
434
Poly(p-phenylene vinylene) copolymer patterns prepared via photolithographic techniques
435
Poly(p-phenylene vinylene) derivatives with ester- and carboxy-functionalized substituents: a versatile platform towards polar functionalized conjugated polymers
436
Poly(p-phenylene) and acrylic elastomer blends for electroactive application
437
Poly(p-phenylene) graft copolymers with polytetrahydrofuran/polystyrene side chains
438
Poly(p-phenylene)-based materials for light-emitting diodes : Electroluminescence and photo-oxidation
439
Poly(p-phenylenediamine) fluorescent nanosphere: A ultra-sensitive fluorescent probe for caffeine
440
Poly(p-phenylenediamine) nanofibers having conjugated structures, a novel, simple and highly selective fluorescent probe for l-cysteine
441
Poly(p-phenylenesulfide)-based nano-composite formation: Delamination of organically modified layered filler via solid-state processing
442
Poly(p-phenylenevinylene) by chemical vapor deposition: synthesis, structural evaluation, glass transition, electroluminescence, and photoluminescence
443
Poly(p-phenylenevinylene) derivatives with conjugated thiophene side chains: Synthesis, photophysics and photovoltaics
444
Poly(p-phenylenevinylene)-Based Alternating Copolymers With Hole Transport Moiety
445
Poly(propargyl alcohol) doped with sulfuric acid, a new proton conductor usable for humidity sensor construction
446
Poly(propylene fumarate)/(calcium sulphate/β-tricalcium phosphate) composites: Preparation, characterization and in vitro degradation
447
Poly(propylene imine) (PPIs) dendrimers modified with glyceryl moieties: Powerful catalysts for catecholase
448
Poly(propylene imine) dendrimer complexes as catalysts for oxidation of alkenes
449
Poly(propylene imine) dendrimers as hydrogen donor in Type II photoinitiated free radical polymerization
450
Poly(propylene imine) dendrimers functionalized with stilbene or 1,4-distyrylbenzene chromophores
451
Poly(propylene sulfide)–borane: convenient and versatile reagent for organic synthesis
452
Poly(propyleneimine) Liquid Crystal Codendrimers Bearing Laterally and Terminally Attached Promesogenic groups
453
Poly(p-xylene tetrahydrothiophenium chloride) doped photoluminescent sol-gel composite
454
Poly(pyridinium salt)s with organic counterions derived from an aromatic diamine containing oxyethylene unit exhibiting amphotropic liquid-crystalline and photoluminescence properties
455
Poly(pyrogallol) film on glassy carbon electrode for selective preconcentration and stripping voltammetric determination of Sb(III) Original Research Article
456
Poly(pyrrole adenosine 5′-triphosphate) (PP-ATP) and conducting polymer bilayers for transport of biologically active ions
457
Poly(pyrrole) and poly(thiophene)/claynanocomposites via latex-colloid interaction
458
Poly(Pyrrole) Conducting Polymer Solid-State Sensor for Potentiometric Determination of Fluoxetine
459
Poly(pyrrole) films efficiently electrodeposited using new monomers derived from 3-bromopropyl-N-pyrrol and dihydroxyacetophenone—Electrocatalytic reduction ability towards bromocyclopentane
460
Poly(pyrrole) versus poly(3,4-ethylenedioxythiophene): implications for biosensor applications
461
Poly(pyrrole-3-carboxylic acid)-alumina composite membrane for affinity adsorption of bilirubin
462
Poly(pyrrole-co-pyrrole propylic acid) film and its application in label-free surface plasmon resonance immunosensors Original Research Article
463
Poly(pyrrole–metallodeuteroporphyrin)electrodes: towards electrochemical biomimetic devices
464
Poly(ruthenium carbonyl spirobifluorenylporphyrin): a new polymer used as a catalytic device for carbene transfer
465
Poly(siloxaneimide)s 2. Polycondensation of some imidic diacid chlorides with aminoalkylsiloxanes
466
Poly(silsesquioxanes) derived from the hydrolytic condensation of organotrialkoxysilanes containing hydroxyl groups
467
Poly(sodium 4-styrenesulfonate) modified carbon nanoparticles by a thermo-mechanical technique and its reinforcement in natural rubber latex
468
Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution
469
Poly(sodium-p-styrenesulfonate) assisted microwave synthesis of ordered mesoporous carbon supported Pd nanoparticles for formic acid electro-oxidation
470
Poly(styrene sulfonic acid) sodium modified nanofiltration membranes with improved permeability for the softening of highly concentrated seawater Original Research Article
471
Poly(styrene/hydroxypropyl methylcellulose phthalate) latex particles prepared by resin-fortified emulsion polymerization
472
Poly(styrene-b-2-(N,N-dimethylamino)ethyl methacrylate) diblock copolymers: Micellization and application in the synthesis of photoluminescent CdS nanoparticles
473
Poly(styrene-b-isobutylene-b-styrene) block copolymer ionomers (BCPI) and BCPI/silicate nanocomposites. 2. Na+BCPI sol–gel polymerization templates
474
Poly(styrene-b-isobutylene-b-styrene) block copolymer ionomers (BCPI), and BCPI/silicate nanocomposites. 1. Organic counterion: BCPI sol–gel reaction template
475
Poly(styrene-b-isobutylene-b-styrene) block copolymers produced by living cationic polymerization. Part III. Dynamic mechanical and tensile properties of block copolymers and ionomers therefrom
476
Poly(styrene-co-acrylonitrile) based proton conductive membranes
477
Poly(styrene-co-acrylonitrile)/montmorillonite organoclay mixtures: a model system for ABS nanocomposites
478
Poly(styrene–isoprene–butadiene-g-SAN) graft copolymers: Size-controllable synthesis and their toughening properties
479
Poly(sulfonated phenylene)-block-poly(arylene ether sulfone) copolymer for polymer electrolyte fuel cell application
480
Poly(sulfone ether amide amide)s as a new generation of soluble, thermally stable polymers
481
Poly(sulfone)/sulfonated poly(ether ether ketone) blend membranes: Morphology study and application in the filtration of alcohol based feeds
482
Poly(tert-butyl acrylate-b-isobutylene-b-styrene) terpolymer from a carbocationic initiator containing a latent radical initiating site
483
Poly(tetrafluoroethylene) separation capillaries for capillary electrophoresis: Properties and applications
484
Poly(tetrafluoroethylene) sputtering in a gas aggregation source for fabrication of nano-structured deposits
485
Poly(tetrafluoroethylene)/polyamide thin-film composite membranes via interfacial polymerization for pervaporation dehydration on an isopropanol aqueous solution
486
Poly(tetrafluoroethylene)@polyaniline/gold composite membranes: Preparation, characterization and application
487
Poly(tetrathiapentalene): a new polymeric TTF derivative
488
Poly(thienylene-benzothiadiazole-thienylene-vinylene): A narrow bandgap polymer with broad absorption from visible to infrared region
489
Poly(thienylenevinylene) prepared by ring-opening metathesis polymerization: Performance as a donor in bulk heterojunction organic photovoltaic devices
490
Poly(thiophenes) derivatized with oligo(oxyethylene) chains as donor materials for organic solar cells
491
Poly(thiophenylanilino) and poly(furanylanilino) polymers
492
Poly(triallyl isocyanurate–co-ethylene dimethacrylate–co-alkyl methacrylate) stationary phases in the chromatographic separation of hydrophilic solutes
493
Poly(triarylamine)s- synthesis and application in electroluminescent devices and photovoltaics
494
Poly(trimethylene teraphthalate) crystal structure and morphology in different length scales
495
Poly(trimethylene terephthalate) copolyester containing ethylene glycol moieties. Part 1: Crystallization kinetics and melting behavior
496
Poly(trimethylene terephthalate) molecular weight and Mark–Houwink equation
497
Poly(trimethylene terephthalate) nanocomposite fibers by in situ intercalation polymerization: thermo-mechanical properties and morphology (I)
498
Poly(urethane methacrylate-co-glycidyl methacrylate)-supported-polypropylene biphasic membrane for lipase immobilization
499
Poly(urethane-imide-imide), a new generation of thermoplastic polyurethane elastomers with enhanced thermal stability
500
Poly(urethaneimides) (PUIs) containing tertiary amine groups as precursors for original PUI cationomers
501
Poly(urethane-methacrylate)s. Synthesis and characterization
502
Poly(urethane–oxazolidone): Synthesis, characterisation and shape memory properties
503
Poly(urethane–urea) nanocapsules prepared by interfacial step polymerisation in miniemulsion: The droplet size: A key-factor for the molecular and thermal characteristics of the polymeric membrane of the nanocapsules?
504
Poly(vinyl acetate), poly((1-O-(vinyloxy) ethyl-2,3,4,6-tetra-O-acetyl-β-d-glucopyranoside) and amorphous poly(lactic acid) are the most CO2-soluble oxygenated hydrocarbon-based polymers
505
Poly(vinyl acetate)–clay hybrids prepared via emulsion polymerization, assisted by a nonionic surfactant
506
Poly(vinyl alcohol) and poly(vinyl pyrrolidone) blended films for local nitric oxide release
507
Poly(vinyl alcohol) capped silver nanoparticles as localized surface plasmon resonance-based hydrogen peroxide sensor
508
Poly(vinyl alcohol) hydrogel fixation on poly(ethylene terephthalate) surface for biomedical application
509
Poly(vinyl alcohol) microspheres with pH- and thermosensitive properties as temperature-controlled drug delivery
510
Poly(vinyl alcohol) multilayer mixed matrix membranes for the dehydration of ethanol–water mixture
511
Poly(vinyl alcohol) nanocomposite films containing chemically exfoliated molybdenum disulfide
512
Poly(vinyl alcohol) particle-reinforced elastomer composites with water-active shape-memory effects
513
Poly(vinyl alcohol) with low surface free energy by fluorination
514
Poly(vinyl alcohol) with low surface free energy by fluorination
515
Poly(vinyl alcohol)/cellulose nanocrystal barrier membranes
516
Poly(vinyl alcohol)/cellulose nanowhiskers nanocomposite hydrogels for potential wound dressings
517
Poly(vinyl alcohol)/Hydrotalcite Composite Nanofibre: Preparation and Characterization
518
Poly(vinyl alcohol)/Oxidized Starch Fibres via Electrospinning Technique: Fabrication and Characterization
519
Poly(vinyl alcohol)/poly(acrylic acid)/TiO2/graphene oxide nanocomposite hydrogels for pH-sensitive photocatalytic degradation of organic pollutants
520
Poly(vinyl alcohol)/poly(methyl methacrylate) blend membranes for pervaporation separation of water + isopropanol and water + 1,4-dioxane mixtures
521
Poly(vinyl alcohol)/polyelectrolyte complex blend membrane for pervaporation dehydration of isopropanol
522
Poly(vinyl alcohol)/silica hybrid nanocomposites by sol-gel technique: Synthesis and properties
523
Poly(vinyl alcohol)/sodium alginate/layered silicate based nanofibrous mats for bacterial inhibition
524
Poly(vinyl alcohol)/sulfated β-cyclodextrin for direct methanol fuel cell applications
525
Poly(vinyl alcohol)-based polymer electrolyte membranes containing polyrotaxane
526
Poly(vinyl alcohol)-colloidal silica composite membranes for fuel cells
527
Poly(vinyl alcohol)–graphene oxide nanohybrid “pore-filling” membrane for pervaporation of toluene/n-heptane mixtures
528
Poly(vinyl alcohol)–hydroxyapatite biomimetic scaffold for tissue regeneration
529
Poly(vinyl alcohol)-H-ZSM-5 zeolite mixed matrix membranes for pervaporation separation of methanol–benzene mixture
530
Poly(vinyl alcohol)-iron oxide nanocomposite membranes for pervaporation dehydration of isopropanol, 1,4-dioxane and tetrahydrofuran
531
Poly(vinyl alcohol)–poly(acrylic acid) interpenetrating networks. Study on phase separation and molecular motions
532
Poly(vinyl alcohol-co-vinyl acetate) complex formation with anionic surfactants particle size of nanogels and their disaggregation with sodium dodecyl sulfate
533
Poly(vinyl alcohol–proline) as corrosion inhibitor for mild steel in 1M hydrochloric acid
534
Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent
535
Poly(vinyl chloride) (PVC) hollow fibre membranes for gas separation
536
Poly(vinyl chloride) functionalization by aliphatic and aromatic amines: application to the extraction of some metal cations
537
Poly(vinyl chloride) membrane cesium ion-selective electrodes based on lipophilic calix[6]arene tetraester derivatives
538
Poly(vinyl chloride) membrane electrode for a stimulant, phentermine, using tris(2-ethylhexyl) phosphate as a solvent mediator
539
Poly(vinyl chloride) plasticized with mixtures of succinate di-esters – synthesis and characterization
540
Poly(vinyl chloride)-based macrocyclic membrane sensors for magnesium
541
Poly(vinyl chloride)-membrane ion-selective bulk optode based on 1,10-dibenzyl-1,10-diaza-18-crown-6 and 1-(2-pyridylazo)-2-naphthol for Cu2+ and Pb2+ ions Original Research Article
542
Poly(vinyl pyrrolidone)—C70 complexes in aqueous solutions
543
Poly(vinyl trimethylsilane) and block copolymers of vinyl trimethylsilane with isoprene: Anionic polymerization, morphology and gas transport properties
544
Poly(vinyl) alcohol coating of the support layer of reverse osmosis membranes to enhance performance in forward osmosis Original Research Article
545
Poly(vinyl) chloride membrane caesium-selective electrodes based on doubly crowned 1,3-calix[4]arenes Original Research Article
546
Poly(vinylferrocene-co-2-hydroxyethyl methacrylate) mediator as immobilized enzyme membrane for the fabrication of amperometric glucose sensor
547
Poly(vinylidene chloride)-based carbon as an electrode material for high power electric double layer capacitors
548
Poly(vinylidene chloride-co-vinyl acetate): comprehensive microstructure analysis by NMR spectroscopy
549
Poly(vinylidene dichloride)-diethylene Triamine Supported Palladium as a New Re-cyclable Catalyst for Heck Reaction
550
Poly(vinylidene fluoride) as a reagent for the synthesis of K2NiF4-related inorganic oxide fluorides
551
Poly(vinylidene fluoride) membrane preparation with an environmental diluent via thermally induced phase separation
552
Poly(vinylidene fluoride) membranes by an ultrasound assisted phase inversion method
553
Poly(vinylidene fluoride) membranes by an ultrasound assisted phase inversion method
554
Poly(vinylidene fluoride) membranes by phase inversion: the role the casting and coagulation conditions play in their morphology, crystalline structure and properties
555
Poly(vinylidene fluoride) reinforced by carbon fibers: Structural parameters of fibers and fiber-polymer adhesion
556
Poly(vinylidene fluoride) ultrafiltration membranes containing hybrid silica nanoparticles: Preparation, characterization and performance
557
Poly(vinylidene fluoride) with improved functionalization for membrane production
558
Poly(vinylidene fluoride)/poly(acrylic acid)/calcium carbonate composite membranes via mineralization
559
Poly(vinylidene fluoride)/polyethersulfone blend membranes: Effects of solvent sort, polyethersulfone and polyvinylpyrrolidone concentration on their properties and morphology
560
Poly(vinylidene fluoride)-acrylic rubber partially miscible blends: Crystallization within conjugated phases induce dual lamellar crystalline structure
561
Poly(vinylidene fluoride)-assisted melt-blending of multi-walled carbon nanotube/poly(methyl methacrylate) composites
562
Poly(vinylidene fluoride)–polydiphenylamine composite electrospun membrane as high-performance polymer electrolyte for lithium batteries
563
Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) based composite electrolytes for lithium batteries
564
Poly(vinylidene fluoride-hexafluoropropylene)-based membranes for lithium batteries
565
Poly(vinylidenefluoride)-hexafluoropropylene–methyl N-methylpyrrolidinium-N-acetate trifluoromethanesulfonylimide–lithium trifluoromethanesulfonylimide gel electrolytes
566
Poly(vinylpyridine) Supported Reagents: A Review
567
Poly(vinylpyrrolidone-b-styrene) block copolymers tethered surfaces for protein adsorption and cell adhesion regulation
568
Poly(α-alkyl γ-glutamate)s of microbial origin: I. Ester derivatization of poly(γ-glutamic acid) and thermal degradation
569
Poly(α-hydroxy acids): carriers for bone morphogenetic proteins
570
Poly(α-isobutyl, β-l-aspartate) is a polymer which belongs to a family of synthetic and polypeptide derivatives. It exhibit polymorphism and exist in hexagonal (13/4 helix) as well as tetragonal form (4/1 helix). Both helices are stable in different envir
571
Poly(β-amino amine) cross-linked PEIs as highly efficient gene vectors
572
Poly(β-amino ester) as a carrier for si/shRNA delivery in lung cancer cells
573
Poly(β-amino ester)s Promote Cellular Uptake of Heparin and Cancer Cell Death Original Research Article
574
Poly(β-hydroxybutyrate) production by a moderate halophile, Halomonas boliviensis LC1
575
Poly(γ,l-glutamic acid)–cisplatin conjugate effectively inhibits human breast tumor xenografted in nude mice
576
Poly(ε-caprolactone) + unsaturated isophtalic polyester blends: Thermal properties and morphology
577
Poly(ε-caprolactone) filled with electrospun nylon fibres: A model for a facile composite fabrication
578
Poly(ε-caprolactone) films as a potential substrate for tissue engineering an epidermal equivalent
579
Poly(ε-caprolactone) macroligands with β-diketonate binding sites: synthesis and coordination chemistry
580
Poly(ε-caprolactone) modified by functional groups: Preparation and chemical–physical investigation
581
Poly(ε-caprolactone)/clay nanocomposites prepared by melt intercalation: mechanical, thermal and rheological properties
582
Poly(ε-caprolactone)-based copolymers bearing pendant cyclic ketals and reactive acrylates for the fabrication of photocrosslinked elastomers
583
Poly(ε-caprolactone)-based hyperbranched polyurethanes prepared via A2 + B3 approach and its shape-memory behavior
584
Poly(ε-caprolactone)-based nanocomposites: Influence of compatibilization on properties of poly(ε-caprolactone)–silica nanocomposites
585
Poly(ε-caprolactone)-block-poly(ethyleneoxide) -block-poly(ε-caprolactone): Biodegradable triblock copolymer spread at the air–water interface
586
Poly(ε-caprolactone)-block-poly(N-vinyl pyrrolidone) diblock copolymers grafted from macrocyclic oligomeric silsesquioxane
587
Poly[(1,4-phenylenevinylene)-alt-(1,3-phenylenevinylene)]s with different length of side chain: their synthesis and optical properties
588
Poly[(2,2′,5′,2″-tetramethoxy-p-terphenyl-5,5″-ylene)propylene]: Synthesis and physical properties of a novel amorphous regularly segmented conjugated polymer
589
Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) synthesis and properties
590
Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] thermoresponsive microspheres: An accurate method based on solute exclusion technique to determine the volume phase transition temperature
591
Poly[(p-phenylene vinylene)-alt-(2,2′-biphenylene vinylene)]s: new conjugated polymers with high solid state photoluminescence quantum efficiencies
592
Poly[(styrene-co-p-methylstyrene)-b-isobutylene-b-(styrene-co-p-methylstyrene)] triblock copolymers. 1. Synthesis and characterization
593
Poly[1-(trimethylsilyl)-1-propine] as chromatographic adsorbent and prospects of its application in packed and capillary columns
594
Poly[1-(trimethylsilyl)-1-propyne] and related polymers: synthesis, properties and functions
595
Poly[1-(trimethylsilyl)-1-propyne] as a solvent resistance nanofiltration membrane material
596
Poly[1,4-(bis-3-quinolyl)-buta-1,3-diyne] nonlinear optical properties and its Langmuir and Langmuir–Blodgett film formation
597
Poly[2,7-(9,9-dioctylfluorene)-alt-(5,5′-bithiophene/permethylated β-cyclodextrin) main-chain polyrotaxane: Synthesis, characterization and surface morphology
598
Poly[2,7-(9-oxo-9-phosphafluorenylene)-alt-co-(1,4-arylene)]s: Phosphorus-containing (pi)-Conjugated Polymers
599
Poly[3-(butylthio)thiophene] Langmuir–Blodgett films as selective solid state chemiresistors for nitrogen dioxide
600
Poly[3,4-(ethylenedithio)thiophene]: High specific capacity cathode active material for lithium rechargeable batteries
601
Poly[3-hexyl-4-(6-bromohexyl)thiophene]: a key-intermediate for the synthesis of self-plastifying multifunctional polythiophenes
602
Poly[acrylic acid-b-styrene-b-isobutylene-b-styrene-b-acrylic acid] pentablock terpolymers: 1. Morphological characterization
603
Poly[bis(2-aminophenyloxy)disulfide]: A polyaniline derivative containing disulfide bonds as a cathode material for lithium battery
604
Poly[dithio-2,5-(1,3,4-thiadiazole)] (PDMcT)–poly(3,4-ethylenedioxythiophene) (PEDOT) composite cathode for high-energy lithium/lithium-ion rechargeable batteries
605
Poly[Fe(phen-NH2)3]2+ modified electrodes: proton-gated charge transfer reactions and applications in current rectification
606
Poly[meso-tetrakis(2-thienyl)porphyrin] for the sensitive electrochemical detection of explosives
607
Poly[N-(2-hydroxypropyl)methacrylamide-block-n-butyl acrylate] micelles in water/DMF mixed solvents
608
Poly[styrene-b-maleated (ethylene/butylene)-b-styrene] (mSEBS) block copolymers and mSEBS/inorganic nanocomposites: I. Morphology and FTIR characterization
609
Poly[tetra­deca­kis­(μ-propionato)hepta­barium] propionic acid monosolvate tetra­hydrate]
610
Poly[μ2-aqua-aqua­[μ3-N-butyl-N-(2-hy­droxy­ethyl)di­thio­carbamato-κ3O,O′:S]sodium]
611
Poly-3,4-ethylenedioxythiophene nanoclusters for high effective solid phase extraction
612
Poly-3-hexylthiophene based organic field-effect transistor: Detection of low concentration of ammonia
613
Poly-3-hydroxybutyrate (PHB): a resorbable conduit for long-gap repair in peripheral nerves
614
Poly-3-hydroxybutyrate-producing extreme halophilic archaeon: Haloferax sp. MA10 isolated from Çamaltı Saltern, İzmir
615
Pólya frequency sequences and real zeros of some 3F2 polynomials
616
Polyacene capacitors
617
Polyacetals based on polymethylsqualene diols, precursors of algaenan in Botryococcus braunii race B
618
Polyacetylene films prepared by intrinsic non-solvent polymerization method - mechanical properties and electrical conductivities
619
Polyacetylene levels in carrot juice, effect of pH and thermal processing
620
Polyacetyleneginsenoside-Ro, a novel triterpene saponin from Panax ginseng
621
Polyacetylenes and a sesquiterpene lactone from Ptilostemon strictus
622
Polyacetylenes as a new alignment medium to measure residual dipolar couplings for chiral organic molecules
623
Polyacetylenes bearing mesogenic side groups: synthesis and properties. Part 3. Influence of flexible spacer length and tail functionality
624
Polyacetylenes from a marine sponge Petrosia sp. inhibit DNA replication at the level of initiation
625
Polyacid gels under a uniaxial load
626
Poly-acid properties of biosynthetic hyaluronan studied by titration
627
Poly-acid properties of biosynthetic hyaluronan studied by titration
628
Polyacid-modified composite resins (“compomers”) and their use in clinical dentistry
629
Polyacrolein containing microspheres: Synthesis, properties and possible medical applications
630
Polyacrolein/mesoporous silica nanocomposite: Synthesis, thermal stability and covalent lipase immobilization
631
Polyacronitrile Ultra Filtration Membranes Used for Separation of Glycerol from Transesterification Process of Biodiesel production.
632
polyacrylamide
633
Polyacrylamide added as a nitrogen source stimulates methanogenesis in consortia from various wastewaters
634
Polyacrylamide and poly(itaconic acid) complexes
635
Polyacrylamide as a substrate for microbial amidase in culture and soil
636
Polyacrylamide as a substrate for microbial amidase in culture and soil
637
Polyacrylamide as an agglomeration additive for copper heap leaching
638
Polyacrylamide as an organic nitrogen source for soil microorganisms with potential effects on inorganic soil nitrogen in agricultural soil
639
Polyacrylamide as an organic nitrogen source for soil microorganisms with potential effects on inorganic soil nitrogen in agricultural soil
640
Polyacrylamide brush coatings preventing microbial adhesion to silicone rubber
641
Polyacrylamide brush layer for hydrophilic interaction liquid chromatography of intact glycoproteins
642
Polyacrylamide coated Milorganite™ and gypsum for controlling sediment and phosphorus loads
643
Polyacrylamide Gel Electrophoresis (PAGE) and Densitometric Measurement of Enzyme Activity of the Pea Root Pathogen Aphanomyces euteiches in Pea Roots
644
Polyacrylamide gel electrophoresis separation and detection of polyamidoamine dendrimers possessing various cores and terminal groups
645
Polyacrylamide Gel Polymer as Water Shut-off System: Preparation and Investigation of Physical and Chemical Properties in One of the Iranian Oil Reservoirs Conditions
646
Polyacrylamide gels as support for enzyme immobilization by entrapment. Effect of polyelectrolyte carrier, pH and temperature on enzyme action and kinetics parameters
647
Polyacrylamide gels with electrostatic functional groups for the molecular imprinting of lysozyme
648
Polyacrylamide gels with electrostatic functional groups for the molecular imprinting of lysozyme Original Research Article
649
Polyacrylamide grafted Agar: Synthesis and applications of conventional and microwave assisted technique
650
Polyacrylamide grafted attapulgite (PAM-ATP) via surface-initiated atom transfer radical polymerization (SI-ATRP) for removal of Hg(II) ion and dyes
651
Polyacrylamide grafting of modified graphene oxides by in situ free radical polymerization
652
Polyacrylamide hydrogels with trapped sulfonated polyaniline
653
Polyacrylamide induced flocculation of a cement suspension
654
Polyacrylamide phantom for self-actuating needle–tissue interaction studies
655
Polyacrylamide preparations for protection of water quality threatened by agricultural runoff contaminants
656
Polyacrylamide sorption opportunity on interlayer and external pore surfaces of contaminant barrier clays
657
Polyacrylamide Synthesis of Nanostructured Copper Aluminate for Photocatalytic Application
658
Polyacrylamide/guar gum graft copolymer for preparation of silver nanoparticles
659
Polyacrylamide/reduced graphene oxide-Ag nanocomposite as highly efficient antibacterial transparent film
660
Polyacrylamide/Zn0.4Ni0.5Cu0.1Fe2O4 nanocomposites: Synthesis, characterization and electromagnetic properties
661
Polyacrylamide+Al2(SO4)3 and polyacrylamide+CaO remove coliform bacteria and nutrients from swine wastewater
662
Polyacrylamide-clay nacre-like nanocomposites prepared by electrophoretic deposition
663
Polyacrylamide-controlled growth of centimeter-scaled polyaniline fibers
664
Polyacrylamide–gelatine carrier system used for invertase immobilization
665
Polyacrylamide–hydroxyapatite composite: Preparation, characterization and adsorptive features for uranium and thorium
666
Polyacrylamides as hydrophilic selectors in non-aqueous capillary electrophoresis
667
Polyacrylamide-treated kaolin: A fabric study
668
Polyacrylate/silica nanocomposite materials prepared by sol–gel process
669
Polyacrylates containing dansyl semicarbazide units sensitive for some structures in solution and film
670
Polyacrylic acid adsorption and conformation in concentrated alumina suspensions
671
Polyacrylic acid brushes grafted from P(St-AA)/Fe3O4 composite microspheres via ARGET-ATRP in aqueous solution for protein immobilization
672
Polyacrylic gel beads reinforced by a polyamide membrane: application to copper removal in aqueous media Original Research Article
673
Polyacrylonitrile (PAN) membranes for ultra- and microfiltration
674
Polyacrylonitrile electrolytes: 1. A novel high-conductivity composite polymer electrolyte based on PAN, LiClO4 and α-Al2O3
675
Polyacrylonitrile membranes via thermally induced phase separation: Effects of polyethylene glycol with different molecular weights
676
Polyacrylonitrile, an unusual linear homopolymer with two glass transitions
677
Polyacrylonitrile, an unusual linear homopolymer with two glass transitions
678
Polyacrylonitrile/Ag Nanoparticles Nanofibers as an Efficient Adsorbent for Natural Gas Condensate Desulfurization
679
Polyacrylonitrile/carbon nanofiber nanocomposite fibers
680
Polyacrylonitrile/vapor grown carbon nanofiber composite films
681
Polyacrylonitrile-based carbon fiber
682
Polyacrylonitrile-based nanofibrous membrane with glycosylated surface for lectin affinity adsorption
683
Polyacrylonitrile-based organic-inorganic composite anion-exchange membranes: Preparation, characterization and its application in making ion-selective membrane electrode for determination of As(V) Original Research Article
684
Polyacrylonitrile-block-poly(methyl acrylate) membranes 2: Swelling behavior and pervaporation performance for separating benzene/cyclohexane
685
Polyacrylonitrile-grafted Okra mucilage: A renewable reservoir to polymeric materials
686
Polyacrylonitrile-grafted Plantago psyllium mucilage for the removal of suspended and dissolved solids from tannery effluent
687
Polyacrylonitrile–propylene carbonate–CuX2 (X=Cl, Br, CF3SO3) solid polymer electrolyte
688
Polyacrylonitrile–sulfolane–CuX2 (X=Cl, Br, CF3SO3) solid polymer electrolyte
689
Polyacylated neohesperidosides From Geranium caespitosum: bacterial multidrug resistance pump inhibitors
690
Polyadenylic acid binding on cationic liposomes doped with the non-ionic nucleolipid Lauroyl Uridine
691
Polyadic codes of prime power length
692
Polyadic Methods in Elastodynamics
693
Polyadic spaces of countable tightness
694
Polyagglutination NOR: new glycosphingolipid antigens recognized by a new type of common human anti-α-galactosyl antibodies
695
PolyA-iEP: A data mining method for the effective prediction of polyadenylation sites
696
Polyakov effective action from functional renormalization group equation Original Research Article
697
Polyakov loop and spin correlators on finite lattices A study beyond the mass gap Original Research Article
698
Polyakov Loop Dynamics in the Center Symmetric Phase
699
Polyakov loop in different representations of SU(3) at finite temperature Original Research Article
700
Polyakov loop percolation and deconfinement in SU(2) gauge theory
701
Polyakov loops and fermionic zero-modes in QCD2 on the torus Original Research Article
702
Polyakov loops and finite-size effects of hadron masses in full lattice QCD
703
Polyakov loops and monopoles in QCD
704
Polyakovʹs spin factor and new algorithms for efficient perturbative computations in QCD
705
Polyalcohol ligand in CuII and FeIII cluster chemistry: Synthesis, structures and magnetic properties of {Cu12} and {Fe8} aggregates
706
Polyalcohols in vinegar as an origin discriminator
707
Polyalkylphenyl-sulphonic acid with acid groups of variable strength from compost
708
Polyalkylphenyl-sulphonic acids with acid groups of variable strength from animal-vegetable wastes
709
Polyalkylthiophene-based photodetector devices: effect of side-chain length on the device performance
710
Polyallene with pendant nitroxyl radicals
711
Polyallene-based graft copolymer via 6-methyl-1,2-heptadien-4-ol and methyl methacrylate
712
Polyallylamine-chlorophyllide derivatized gold and silver nanoparticles as optical probes for sensor applications
713
Polyallylamine-grafted cellulose gel as high-capacity anion-exchanger
714
Poly-aluminum-silicate-chloride (PASiC)—a new type of composite inorganic polymer coagulant
715
Polyamide [1,3-Dicarboxymethoxybenzene and Ethylene Diamine] Complexation with Some Metal Ions
716
Polyamide 11/poly(hydroxy amino ether) blends: Influence of the blend composition and morphology on the barrier and mechanical properties
717
Polyamide 4,6 nanocomposites with and without the use of a maleated polyolefin elastomer as a toughener
718
Polyamide 6/carbon black/molybdenum disulphide composites: Friction, wear and morphological characteristics
719
Polyamide 66 as a cryogenic dielectric Original Research Article
720
Polyamide 6-clay nanocomposites/polypropylene-grafted-maleic anhydride alloys
721
Polyamide active layers of low pressure RO membranes: Data on spatial performance non-uniformity and degradation by hypochlorite solutions Original Research Article
722
Polyamide- and polycarbonate-based nanocomposites prepared from thermally stable imidazolium organoclay
723
Polyamide as a Denture Base Material: A Literature Review
724
Polyamide based nucleic acid analogs — synthesis of δ-amino acids with nucleic acid bases bearing side chains
725
Polyamide formation on a cellulose triacetate support for osmotic membranes: Effect of linking molecules on membrane performance Original Research Article
726
Polyamide hydrolysis accelerated by small weak organic acids
727
Polyamide interfacial composite membranes prepared from m-phenylene diamine, trimesoyl chloride and a new disulfonated diamine
728
Polyamide membrane precipitation studied by confocal backscattering microscopy
729
Polyamide nanofilm composite membranes (NCMs) supported by chitosan coated electrospun nanofibrous membranes: Preparation and separation performance research Original Research Article
730
Polyamide nanofiltration membrane with high separation performance prepared by EDC/NHS mediated interfacial polymerization
731
Polyamide thin film composite membrane prepared from m-phenylenediamine and m-phenylenediamine-5-sulfonic acid
732
Polyamide thin film composite membranes prepared from 3,4′,5-biphenyl triacyl chloride, 3,3′,5,5′-biphenyl tetraacyl chloride and m-phenylenediamine
733
Polyamide thin film composite membranes prepared from isomeric biphenyl tetraacyl chloride and m-phenylenediamine
734
Polyamide thin-film composite membranes based on carboxylated polysulfone microporous support membranes for forward osmosis
735
Polyamide thin-film composite membranes prepared by interfacial polymerization for pervaporation separation Original Research Article
736
Polyamide thin-film composite membranes prepared from a novel triamine 3,5-diamino-N-(4-aminophenyl)-benzamide monomer and m-phenylenediamine
737
Polyamide thin-film nanofiltration membranes containing TiO2 nanoparticles Original Research Article
738
Polyamide/Polyacrylonitrile (PA/PAN) thin film composite osmosis membranes: Film optimization, characterization and performance evaluation
739
Polyamide/SDS–clay hybrid nanocomposite membrane application to water–ethanol mixture pervaporation separation
740
Polyamide-12 layered silicate nanocomposites by melt blending
741
Polyamide-6,6/in situ silica hybrid nanocomposites by sol–gel technique: synthesis, characterization and properties
742
Polyamide-based composite membranes: Part 1. Preparation and characterization Original Research Article
743
Polyamide-based composite membranes: Part 2. Interaction, crystallization and morphology Original Research Article
744
Polyamide-imide/polyetherimide dual-layer hollow fiber membranes for pervaporation dehydration of C1–C4 alcohols
745
Polyamide-imides bearing furan moieties. 1. Solution polycondensation of aromatic dianhydrydes with 2-furoic acid dihydrazides
746
Polyamide–POSS hybrid membranes for seawater desalination: Effect of POSS inclusion on membrane properties
747
Polyamides based on the renewable monomer, 1,13-tridecane diamine II: Synthesis and characterization of nylon 13,6
748
Polyamides containing s-triazine rings and fluorene “cardo”groups: synthesis and characterization
749
Polyamides derived from piperazine and used for hot-melt adhesives: synthesis and properties
750
Polyamides from lactams by centrifugal molding via anionic ring-opening polymerization
751
Polyamides incorporating furan moieties. 5. Synthesis and characterisation of furan-aromatic homologues
752
Polyamides nanoparticles containing flexible linkages and their copper complexes with novel dielectric properties: Structure–property relationship
753
Polyamidoamine dendrimer conjugated chitosan nanoparticles for the delivery of methotrexate
754
Polyamidoamine dendrimers as off-column binding agent and in-column pseudostationary phase for efficient and sensitive capillary electrophoretic analysis of fluoroquinolones in chicken muscles
755
Polyamidoamine dendrimers as sweeping agent and stationary phase for rapid and sensitive open-tubular capillary electrophoretic determination of heavy metal ions
756
Polyamidoamine dendrimers functionalized with electrochemiluminescent polypyridyl Ru(II) complexes
757
Polyamidoamine dendrimers surface-engineered with biomimetic phosphorylcholine as potential drug delivery carriers
758
Polyamidoamine Dendrimers-MoS2 Nanocomposites for Photocatalytic Degradation of Chlorpyrifos and Glyphosate Pesticides
759
Polyamine acetylation in rat brain during N-ethyl-N-nitrosourea-induced cerebral carcinogenesis
760
Polyamine anabolic/catabolic regulation along the woody grapevine plant axis
761
Polyamine biosynthesis and control of the development of functional pollen in kiwifruit
762
Polyamine biosynthesis and degradation are modulated by exogenous gamma-aminobutyric acid in root-zone hypoxia-stressed melon roots
763
Polyamine biosynthetic diversity in plants and algae
764
Polyamine catabolism is involved in response to salt stress in soybean hypocotyls
765
Polyamine conjugates of meso-tritolylporphyrin and protoporphyrin IX: Potential agents for photodynamic therapy of cancers Original Research Article
766
Polyamine content and metabolism in Arabidopsis thaliana and effect of spermidine on plant development
767
Polyamine contents of human breast cancer cells treated with the cytotoxic agents chlorpheniramine and dehydrodidemnin B
768
Polyamine Degradation Pathway Regulating Growth and GABA Accumulation in Germinating Fava Bean under Hypoxia-NaCl Stress
769
Polyamine derivatives as inhibitors of trypanothione reductase and assessment of their trypanocidal activities Original Research Article
770
Polyamine determination in different strains of the yeast Debaryomyces hansenii by high pressure liquid chromatography
771
Polyamine effects on human myometrial contractility
772
Polyamine levels in the seagrass Cymodocea nodosa
773
Polyamine Metabolism and Growth of Neurospora Strains Lacking Cis-Acting Control Sites in the Ornithine Decarboxylase Gene
774
Polyamine metabolism and S -adenosylmethionine decarboxylase gene expression during the cytokinin-stimulated greening process
775
Polyamine metabolism and biosynthetic gene expression in Arabidopsis thaliana under salt stress
776
Polyamine metabolism during the cell cycle of synchronized tobacco BY-2 cell line
777
Polyamine metabolism during the growth cycle of tobacco BY-2 cells
778
Polyamine Metabolism in an Incompatible Interaction between Barley and the Powdery Mildew Fungus, Blumeria graminis f. sp. hordei
779
Polyamine metabolism in high risk patients undergoingmajor abdominal operation
780
Polyamine metabolism in maize tumors induced by Ustilago maydis
781
Polyamine Oxidase and Diamine Oxidase Activities in Human Milk during the First Month of Lactation
782
Polyamine Production in Lichens Under Metal Pollution Stress
783
Polyamine profile in ovine and caprine colostrum and milk
784
Polyamine profiles in the urine of patients with leukemia
785
Polyamine Synthesis from Proline in the Developing Porcine Placenta
786
Polyamine-functionalized carbon quantum dots for chemical sensing Original Research Article
787
Polyamine-induced nitric oxide generation and its potential requirement for peroxide in suspension cells of soybean cotyledon node callus
788
Polyamines – V: The structure of tetramethylene-1,4-bis(N-deoxyglucitolammonium chloride) studied by X-ray diffraction, DFT calculations, NMR and FTIR spectroscopy
789
Polyamines and ”scavenging system”: influence of exogenous spermidine on catalase and guaiacol peroxidase activities, and free polyamine level in barley leaves under water deficit
790
Polyamines and salt stress response and tolerance in Arabidopsis thaliana flowers
791
Polyamines and stress: Biological role, metabolism, and regulation
792
Polyamines and the NMDA receptor: Modifying intrinsic activities with aromatic substituents
793
Polyamines and their metabolizing enzymes in human frontal cortex and hippocampus: Preliminary measurements in affective disorders
794
Polyamines as a defense mechanism against lipoperoxidation in Trypanosoma cruzi
795
Polyamines as cancer markers: applicable separation methods
796
Polyamines content in plant derived food: A comparison between soybean and Jerusalem artichoke
797
Polyamines Improve Anti-Blood Lactate Accumulation in an Acidosis Rat Model
798
Polyamines in biological samples: Rapid and robust quantification by solid-phase extraction online-coupled to liquid chromatography–tandem mass spectrometry
799
Polyamines influence morphogenesis and caffeine biosynthesis in in vitro cultures of Coffea canephora P. ex Fr.
800
Polyamines interaction with thylakoid proteins during stress
801
Polyamines Mediate Coronary Transcapillary Macromolecular Transport in the Calcium Paradox
802
Polyamines modify the components of phospholipids-based signal transduction pathway in Coffea arabica L. cells
803
Polyamines suppress manifestation of cytokinin primary effects
804
Polyamines with N-(3-phenylpropyl) substituents are effective competitive inhibitors of trypanothione reductase and trypanocidal agents
805
Polyamines, and effects from reducing their synthesis during egg development in the yellow fever mosquito, Aedes aegypti
806
Polyamines. I. Spectroscopic properties of N,N-bis-(phthalimidopropyl)-N-propylamine and supramolecular interactions in its crystals
807
Polyamines. III. Spectroscopic properties of N,N-bis-(phthalimidopropyl)-N-octylamine and supramolecular interactions in its crystals
808
Polyamines. IV. Spectroscopic properties of N,N-bis-(1,8-naphthalenedicarboximidopropyl)-N-propylamine and supramolecular interactions in its crystals
809
Polyamines. Part II: Spectroscopic properties of N,N-dimethyl-3-phthalimidopropylammonium acetate and hydrochloride and supramolecular interactions in their crystals
810
Polyamines: metabolism and implications in human diseases
811
Polyamino acids as catalysts in asymmetric synthesis Review Article
812
Polyamino acids as synthetic enzymes: mechanism, applications and relevance to prebiotic catalysis
813
Polyaminocarboxylic acids rejection by charged nanofiltration membrane
814
Poly-amino-enolates: First examples of odd alternant conducting polymers Original Research Article
815
Polyaminopolyphosрhonates and Polyaminopolycarbonoates (that are “Chelators”) in Mission of Inhibiting of Microbiological Corrosion with Desulfovibrio Desulfuricans
816
Polyamorphic transitions in silica glass
817
Polyamorphic transitions in yttria–alumina liquids
818
Polyamorphism: Path to new high density glasses at ambient conditions
819
Polyampholytes superabsorbent nanocomposites with excellent gel strength
820
Polyandry occurs because females initially trade sex for protection
821
Polyanhydride degradation and erosion
822
Polyanhydride implant for antibiotic delivery—from the bench to the clinic
823
Polyanhydride microparticles enhance dendritic cell antigen presentation and activation
824
Polyanhydrides and poly(ortho esters)
825
Polyanhydrides: an overview
826
Polyaniline – fractionation, spectroscopic and structural properties
827
Polyaniline (PANI)–Co0.5Mn0.5Fe2O4 nanocomposite: Synthesis, characterization and magnetic properties evaluation
828
Polyaniline (skin)/polyamide 6 (core) composite fiber: Preparation, characterization and application as a dye adsorbent
829
Polyaniline actuators: Part 1. PANI(AMPS) in HCl
830
Polyaniline actuators: Part 2. PANI(AMPS) in methanesulfonic acid
831
Polyaniline and its substituted derivatives as sensor for aliphatic alcohols
832
Polyaniline and poly(flavin adenine dinucleotide) doped multi-walled carbon nanotubes for p-acetamidophenol sensor
833
Polyaniline and polyaniline-carbon black nanostructures as electrochemical capacitor electrode materials
834
Polyaniline and polyaniline–carbon nanotube composite fibres as battery materials in ionic liquid electrolyte
835
Polyaniline and polyaniline–thiokol rubber composite coatings for the corrosion protection of mild steel
836
Polyaniline and polypyrrole coatings on aluminum for PEM fuel cell bipolar plates
837
Polyaniline and polypyrrole oxygen reversible electrodes
838
Polyaniline and polypyrrole prepared in the presence of surfactants: a comparative conductivity study
839
Polyaniline and polypyrrole: A comparative study of the preparation
840
Polyaniline and polypyrrole: Where are we headed?
841
Polyaniline as a hole injection layer on organic photovoltaic cells
842
Polyaniline as a near-infrared radiation absorbing additive
843
Polyaniline as a near-infrared radiation absorbing additive
844
Polyaniline as a new sensitive layer for gas sensors Review Article
845
Polyaniline as an electrode material for magnesium reserve battery
846
Polyaniline as Hole Transport Material to Prepare Solid Solar Cells
847
Polyaniline as marine antifouling and corrosion-prevention agent
848
Polyaniline as pH-sensitive component in plasticized PVC membranes
849
Polyaniline as possible anode materials for the lead acid batteries
850
Polyaniline as potential radical scavenger for ultra-high molecular weight polyethylene
851
Polyaniline as potential radical scavenger for ultra-high molecular weight polyethylene
852
Polyaniline Based Electrochemical Sensor for the Detection of Dengue Virus Infection
853
Polyaniline based electrodes for electrochemical supercapacitor: Synergistic effect of silver, activated carbon and polyaniline
854
Polyaniline based optical pH sensor
855
Polyaniline binder for functionalized acetylene black: A hybrid material for supercapacitor
856
Polyaniline biosensor for choline determination
857
Polyaniline blends cast from Hexafluoro-2-propanol
858
Polyaniline by new miniemulsion polymerization and the effect of reducing agent on conductivity
859
Polyaniline coated conducting fabrics. Chemical and electrochemical characterization
860
Polyaniline coated micro-capillaries for continuous flow analysis of aqueous solutions Original Research Article
861
Polyaniline coatings: anionic membrane nature and bipolar structures for anticorrosion
862
Polyaniline complex with fullerene C60
863
Polyaniline composite by in situ polymerization on a swollen PVA gel
864
Polyaniline composite coatings interrogated by a nulling optical-transmittance bridge for sensing low concentrations of ammonia gas
865
Polyaniline Composite Membranes Synthesis in Presence of Various Acid Dopants for Pressure Filtration
866
Polyaniline conformational studies in conductive blends using resonance Raman spectroscopy
867
Polyaniline containing palladium — new conjugated polymer supported catalysts
868
Polyaniline deposition to enhance the specific capacitance of carbon nanotubes for supercapacitors
869
Polyaniline doped with dimethylsulfate as a polymer electrode for all solid-state power source system
870
Polyaniline doped with esters of 5-sulfo-i-phthalic acid and its blends with nonconducting polymers
871
Polyaniline doped with macromolecular acids
872
Polyaniline doped with modified gold nanoparticles and its electrochemical properties in neutral aqueous Tsolution
873
Polyaniline effect on the conductivity of the PMMA/Ag hybrid composite
874
Polyaniline electrodeposition from neutral aqueous media: Application to the deposition on oxidizable metals
875
Polyaniline electrolytic capacitator
876
Polyaniline emeraldine base in N-methyl-2-pyrrolidinone containing secondary amine additives: B. Characterization of solutions and thin films
877
Polyaniline fibres containing single walled carbon nanotubes: Enhanced performance artificial muscles
878
Polyaniline film deposition from the oxidative polymerization of aniline using K2Cr2O7
879
Polyaniline films based ultramicroelectrodes sensitive to pH
880
Polyaniline films for protection against corrosion
881
Polyaniline films with nanostructure used as neural probe coating surfaces
882
Polyaniline fractals — a computer modelling
883
Polyaniline in doped and undoped form in anti-corrosion coatings
884
Polyaniline intercalation in α-Sn(HPO4)2-H2O
885
Polyaniline layer for iron protection in sulfate medium
886
Polyaniline membrane based potentiometric sensor for ascorbic acid, other redox active species and chloride
887
Polyaniline membranes for the dehydration of tetrahydrofuran by pervaporation
888
Polyaniline micro- and nanofibrils
889
Polyaniline micro/nanofibers doped with saturation fatty acids
890
Polyaniline microsphere encapsulated by poly(methyl methacrylate) and investigation of Tits electrorheological properties
891
Polyaniline microtubes synthesized via supercritical CO2 and aqueous interfacial polymerization
892
Polyaniline mixed LB films exposed to X-rays
893
Polyaniline modified electrodes for detection of dyes
894
Polyaniline modified organic–inorganic hybrid cation-exchange membranes for the separation of monovalent and multivalent ions Original Research Article
895
Polyaniline nanocomposites via chemical oxidative polymerization in the presence of functional MCM-48 as in situ dopant
896
Polyaniline nanofiber as a novel immobilization matrix for the anti-leukemia enzyme l-asparaginase
897
Polyaniline nanofiber coated monolith reactor for enzymatic bioconversion
898
Polyaniline nanofiber humidity sensor prepared by electrospinning
899
Polyaniline nanofiber reinforced nanocomposite based highly sensitive piezoelectric sensors for selective detection of hydrochloric acid: Analysis of response mechanism
900
Polyaniline nanofiber reinforced nanocomposite coated quartz crystal microbalance based highly sensitive free radical sensors
901
Polyaniline nanofibers as the electrode material for supercapacitors
902
Polyaniline nanofibers fabricated by electrochemical polymerization: A mechanistic study
903
Polyaniline nanofibers prepared with hydrogen peroxide as oxidant
904
Polyaniline nanofibers synthesized by rapid mixing polymerization
905
Polyaniline nanofibers synthesized in compressed CO2
906
Polyaniline nanofiber–silica composite aerogels
907
Polyaniline nanofibres as a cathode material for rechargeable lithium-polymer cells assembled with gel polymer electrolyte
908
Polyaniline nanofibres as templates for the covalent immobilisation of biomolecules
909
Polyaniline nanofilms as a sensing device for ionizing radiation
910
Polyaniline nanoparticles doped with star-like poly(styrene sulfonate): Synthesis and electrochromic properties
911
Polyaniline nanoparticles grown on the surface of carbon microspheres aggregations for electrochemical supercapacitors
912
Polyaniline nanostructures doped with mono-sulfonated dendrons via a self-assembly process
913
Polyaniline nanotubes and their dendrites doped with different naphthalene sulfonic acids
914
Polyaniline nanotubes and their dendrites doped with different naphthalene sulfonic acids Original Research Article
915
Polyaniline nanotubes doped with polymeric acids
916
Polyaniline nanotubules—anion effect on conformation and oxidation state of polyaniline studied by Raman spectroscopy
917
Polyaniline nanowire electrodes with high capacitance synthesized by a simple approach
918
Polyaniline nano-wires and nano-networks
919
Polyaniline nanowires on TiO2 nano/microfiber hierarchical nano/microstructures: Preparation and their photocatalytic properties
920
Polyaniline oligomers; synthesis and characterisation
921
Polyaniline on surface modification of diatomite: a novel way to obtain conducting diatomite fillers
922
Polyaniline on the metallic side of the insulator-to-metal transition due to dispersion: the basis for successful nano-technology and industrial applications of organic metals
923
Polyaniline prepared in ethylene glycol or glycerol
924
Polyaniline prepared in solutions of phosphoric acid: Powders, thin films, and colloidal dispersions
925
Polyaniline protonated with camphorsulfonic acid: modelling of its crystalline structure
926
Polyaniline reinforced conducting E-glass fabric using 4-chloro-3-methyl phenol as secondary dopant for the control of electromagnetic radiations
927
Polyaniline sheathed electrospun nanofiber bar for in vivo extraction of trace acidic phytohormones in plant tissue
928
Polyaniline stabilized highly dispersed gold nanoparticle: an in-situ chemical synthesis route
929
Polyaniline supported palladium catalyzed Suzuki–Miyaura cross-coupling of bromo- and chloroarenes in water
930
Polyaniline supported vanadium catalyzed aerobic oxidation of alcohols to aldehydes and ketones
931
Polyaniline synthesis catalysed by glucose oxidase
932
Polyaniline synthesis with iron(III) chloride–hydrogen peroxide catalyst system: Reaction course and polymer structure study
933
Polyaniline synthesis: influence of powder morphology on conductivity of solution cast blends with polystyrene
934
Polyaniline thin films – structural anisotropy study by use of synchrotron radiation surface diffraction
935
Polyaniline thin films in situ polymerized under very high pressure
936
Polyaniline treated with organic acids: doping characteristics and stability
937
Polyaniline uniformly coated on graphene oxide sheets as supercapacitor material with improved capacitive properties
938
Polyaniline with ω-hydroxyalkoxy pendant substituent on the meta-position
939
Polyaniline, a dynamic block copolymer: key to attaining its intrinsic conductivity?
940
Polyaniline, air stable organic metal: fact, no longer fiction
941
Polyaniline, Polyaniline/SiO2 and Poly(4-vinylpyridine): as Highly Efficient and Recyclable Green Heterogeneous Basic Catalysts for the Three-Component Synthesis of Tetrahydrobenzopyran and 3,4-Dihydropyrano[c]Chromene Derivatives
942
Polyaniline, polypyrrole and poly(3,4-ethylenedioxythiophene) as additives of organic coatings to prevent corrosion
943
POLYANILINE/12-PHOSPHOTUNGSTIC ACID/V2O5 NANOCOMPOSITE AND ITS PLATINUM ANALOG AS OXYGEN REDUCTION ELECTROCATALYSTS
944
Polyaniline/Au&Fe3O4@Au sub-microcables fabricated by electrospinning and electroless deposition
945
Polyaniline/carbon nanotube multi-layered hollow microspheres with sandwich structure and their electrochemical performance
946
Polyaniline/cellulose fiber composite prepared using persulfate as oxidant for Cr(VI)-detoxification
947
Polyaniline/chitosan composite: An eco-friendly polymer for enhanced removal of dyes from aqueous solution
948
Polyaniline/clay as nanostructured conductive filler for electrically conductive epoxy composites. Influence of filler morphology, chemical nature of reagents, and curing conditions on composite conductivity
949
Polyaniline/CoFe2O4 nanocomposites: A novel synthesis, characterization and magnetic properties
950
Polyaniline/epoxy coatings with good anti-corrosion properties
951
Polyaniline/Fe3O4/Poly (Methyl Methacrylate) Nanocomposites as an Acrylic Resin Coating for Enhancement of Anticorrosion Properties of Alkyd Paints
952
Polyaniline/Gold Nanoparticle Multilayer Films: Assembly, Properties, and Biological Applications
953
Polyaniline/Graphene Nanocomposite as a Promising Sorbent for Dispersive Solid Phase Extraction of Avermectins from Citrus Fruit Juice
954
Polyaniline/graphite nanosheet, polyaniline/Ag/graphite nanosheet, polyaniline/Ni/graphite nanosheet composites and their electromagnetic properties
955
Polyaniline/lignin blends: FTIR, MEV and electrochemical characterization
956
Polyaniline/lignin blends: thermal analysis and XPS
957
Polyaniline/poly(ethylene terephthalate) film as a new optical sensing material
958
Polyaniline/polyacrylamide conducting composite hydrogel with a porous structure
959
Polyaniline/polyacrylamide conducting composite hydrogel with a porous structure
960
Polyaniline/polyimide blends for pervaporation and gas separation studies
961
Polyaniline/polysulfone composite film electrode for simultaneous determination of hydroquinone and catechol
962
Polyaniline/polyurethane networks. II. A spectroscopic study
963
Polyaniline/polyvinyl alcohol blends: Effect of sulfonic acid dopants on microstructural, optical, thermal and electrical properties
964
Polyaniline/polyvinyl alcohol blends: Effect of sulfonic acid dopants on microstructural, optical, thermal and electrical properties
965
Polyaniline/silver nanocomposite preparation under extreme or non-classical conditions
966
Polyaniline/silver nanocomposites: Dielectric properties and ethanol vapour sensitivity
967
Polyaniline/SnO2 nanocomposite for supercapacitor applications
968
Polyaniline/thermoplastic polyurethane blends: Preparation and evaluation of electrical conductivity
969
Polyaniline/TiO2 microspheres prepared by a template-free method
970
Polyaniline/TiO2 solar cells
971
Polyaniline/Vanadium oxide composites: An effective control in morphology by varying reactant concentration
972
Polyaniline/zeolite as the cathode in a novel gel electrolyte primary dry cell
973
Polyaniline/zeolite LTA composites and electrical conductivity response towards CO
974
Polyaniline/γ-Fe2O3 nanocomposite for room temperature LPG sensing
975
Polyaniline: A polymer with many interesting intrinsic redox states
976
Polyaniline: conformational changes induced in solution by variation of solvent and doping level
977
Polyaniline-based catalysts characterized by dynamic DSC Original Research Article
978
Polyaniline-based fiber for headspace solid-phase microextraction of substituted benzenes determination in aqueous samples Original Research Article
979
Polyaniline-based microelectrodes for sensing ascorbic acid in beverages
980
Polyaniline-based nanocomposite materials for hydrogen storage
981
Polyaniline-based nickel electrodes for electrochemical supercapacitors—Influence of Triton X-100
982
Polyaniline–bismuth oxide nanocomposite sensor for quantification of anti-parkinson drug pramipexole in solubilized system
983
Polyaniline-carbon composite films as supports of Pt and PtRu particles for methanol electrooxidation Original Research Article
984
Polyaniline–CdS nanocomposite from organometallic cadmium precursor
985
Polyaniline–chitosan nanocomposite: High performance hydrogen sensor from new principle
986
Polyaniline-coated carbon particles and their electrode behavior in organic carbonate electrolyte
987
Polyaniline-coated halloysite nanotubes via in-situ chemical polymerization
988
Polyaniline-coated iron: studies on the dissolution and electrochemical activity as a function of pH
989
Polyaniline-coated PMMA microsphere for electrorheological fluids
990
Polyaniline-coated silica gel
991
Polyaniline-containing electrical conductive composite prepared by two inverted emulsion pathways
992
Polyaniline–DBSA/organophilic clay nanocomposites: synthesis and characterization
993
Polyaniline–DBSA/polymer blends prepared via aqueous dispersions
994
Polyaniline-dodecylhydrogensulfate-acid salt: synthesis and characterization
995
Polyaniline-graphene composites with a three-dimensional array-based nanostructure for high-performance supercapacitors
996
Polyaniline-intercalated graphene oxide sheet and its transition to a nanotube through a self-curling process
997
Polyaniline-iron oxide nanohybrid film as multi-functional label-free electrochemical and biomagnetic sensor for catechol Original Research Article
998
Polyaniline–LiNi ferrite core–shell composite: Preparation, characterization and properties
999
Polyaniline–LiNi ferrite core–shell composite: Preparation, characterization and properties
1000
Polyaniline-modified activated carbon electrodes for capacitive deionisation Original Research Article
بازگشت