<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis and Validation of a Real-Time AC Drive Simulator.
2
Analysis and validation of a run-of-mine ore grinding mill circuit model for process control
3
Analysis and validation of a simplified model of a wet flue gas cleaning system
4
Analysis and validation of ozone variability observed by lidar during the ESCOMPTE-2001 campaign
5
Analysis and validation of the methodology used in the extrapolation of wind speed data at different heights
6
Analysis and Verification of Service Interaction Protocols – A Brief Survey
7
Analysis and visualisation of flow around blades of axial fans for large capacity open-type motors
8
Analysis and visualisation with host-based software – The features of STN®AnaVist™
9
Analysis and visualization tools in CFD, part I: A configurable data extraction environment
10
Analysis and visualization tools in CFD, part II: A case study in grid adaptivity
11
Analysis and VLSI Architecture for 1-D and 2-D Discrete Wavelet Transform
12
Analysis and μ-based controller design for an electromagnetic suspension system
13
Analysis andDesign of ParallelMechanismsWith Flexure Joints
14
Analysis Approach to Durability Based on Material Initial Fatigue Quality and S-N Curve
15
Analysis at atomic level of dislocation emission and motion around nanoindentations in gold
16
Analysis at medium scale of low-resolution DInSAR data in slow-moving landslide-affected areas
17
Analysis at the genomospecies level of microbial populations changes in activated sludge: the case of Aeromonas
18
Analysis Based Multi-Cloud Interconnection on Sky Computing
19
Analysis based on equation of state for sodium halides Original Research Article
20
Analysis based on microcontact mechanism for the roughness dependent stick–slip motion
21
Analysis Based on the Three Objective Educational Domains for Final Summative Secondary Examinations of Science Subject (Chemistry, Physics, and Biology)
22
Analysis behaviour of static and dynamic properties of Ethylene-Propylene-Diene-Methylene crumb rubber mortar
23
Analysis by CGH of the tumor cell lines of the NCI anticancer drug discovery screen
24
Analysis by comparative genomic hybridization of gastric cancer with peritoneal dissemination and/or positive peritoneal cytology
25
Analysis by data mining in the emergency medicine triage database at a Taiwanese regional hospital
26
Analysis by desorption of volatile impurities from an ionic liquid solution in an unmodified gas chromatograph inlet
27
Analysis by droplet size classes of the liquid flow structure in a pressure swirl hollow cone spray
28
Analysis by electrochemical impedance spectroscopy of new MCFC cathode materials
29
Analysis by fuzzy difference equations of a model of CO2 level in the blood Original Research Article
30
Analysis by gas chromatography/mass spectrometry of fatty acids and esters in alcoholic beverages and tobaccos Original Research Article
31
Analysis by gas chromatography–mass spectrometry of the essential oil from the aerial parts of Pimpinella junoniae Ceb. & Ort., gathered in La Gomera, Canary Islands, Spain
32
Analysis by gas chromatography–mass spectrometry of the essential oils from the aerial parts of Pimpinella anagodendron Bolle and Pimpinella rupicola Svent., two endemic species to the Canary Islands, Spain
33
Analysis by gas chromatography–mass spectrometry of the essential oils from the aerial parts of Rutheopsis herbanica (Bolle) Hans. & Kunk., gathered in Fuerteventura (Canary Islands)
34
Analysis by gas chromatography–mass spectrometry of the volatile components of Ageratina adenophora Spreng., growing in the Canary Islands
35
Analysis by gas chromatography–mass spectrometry of the volatile components of Teucrium lusitanicum and Teucrium algarbiensis
36
Analysis by gas chromatography–mass spectrometry of the volatiles from the fruits of Ammodaucus leucotrichus subsp. leucotrichus and subsp. nanocarpus grown in North Africa and the Canary Islands, respectively
37
Analysis by high-resolution electron microscopy of elastic strain in thick InAs layers embedded in Ga0.47In0.53As buffers on InP(0 0 1) substrate Original Research Article
38
ANALYSIS BY HPLC-MS/MS OF BIOPHENOLIC COMPONENTS IN OLIVES AND OILS
39
Analysis by Laser-Induced Breakdown Spectroscopy of Complex Solids, Liquids, and Powders with an Echelle Spectrometer
40
Analysis by LC/ESI-MS of iophenoxic acid derivatives and evaluation as markers of oral baits to deliver pharmaceuticals to wildlife
41
Analysis by liquid chromatography–electrospray ionization tandem mass spectrometry and acute toxicity evaluation for β-blockers and lipid-regulating agents in wastewater samples
42
Analysis by modeling of plasma flow interactions with liquid injection
43
Analysis by phage display selection and site-directed retromutagenesis of the Mustard Trypsin Inhibitor 2 reactive site
44
Analysis by pulsed Doppler tissue imaging of ventricular interaction in long-distance competitive swimmers
45
Analysis by Raman spectroscopy of the conformational structure of whey proteins constituting fouling deposits during the processing in a heat exchanger Original Research Article
46
Analysis by simulation of a solar still integrated in a greenhouse roof
47
Analysis by synchrotron X-ray radiography of convection effects on the dynamic evolution of the solid–liquid interface and on solute distribution during the initial transient of solidification Original Research Article
48
Analysis by using X-ray photoelectron spectroscopy for polymethyl methacrylate and polytetrafluoroethylene etched by KrF excimer laser
49
Analysis by virus induced gene silencing of the expression of two proline biosynthetic pathway genes in Nicotiana benthamiana under stress conditions
50
Analysis by X-ray photoelectron spectroscopy of ruthenium stabilised polynuclear hexacyanometallate film electrodes Original Research Article
51
Analysis capability of alkylphosphonic acids and inorganic anions in aqueous solutions by ion exchange chromatography
52
Analysis conditions of an industrial Al–Mg–Si alloy by conventional and 3D atom probes
53
Analysis conditions of an industrial Al–Mg–Si alloy by conventional and 3D atom probes
54
Analysis conditions of an industrial Al–Mg–Si alloy by conventional and 3D atom probes
55
Analysis Effect of Environment Attitude, Health Consciousness and Knowledge in Developing Product Perception and Intention to Buy (A Study on Organic Food Product)
56
Analysis efficiency of Iranian Ajowan ecotypes on hairy root production mediated by different Agrobacterium rhizogenesis strains
57
Analysis Expression of ZIP1 and Caspase-3 Protein in Adenocarsinoma of the Prostate
58
Analysis for a class of singularly perturbed hybrid systems via averaging
59
Analysis for a crack emanating from a corner of a square hole in an infinite plate using the hybrid displacement discontinuity method
60
Analysis for a special first order characteristic equation with delay dependent parameters
61
Analysis for a system of coupled reaction-diffusion parabolic equations arising in biology
62
Analysis for a two-dissimilar-component cold standby repairable system with repair priority
63
Analysis for a two-dissimilar-component cold standby repairable system with repair priority
64
Analysis for a two-step dispersion scheme for coupled non-linear Schrِdinger equations
65
Analysis for an environmental friendly seedling breeding system
66
Analysis for an N-stepped Rayleigh bar with sections of complex geometry
67
Analysis for Arctic valve heat tracing requirements
68
Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding
69
Analysis for buckling and vibrations of composite stiffened shells and plates
70
Analysis for Cd, Cu, Ni, Zn, and Mn in estuarine water by inductively coupled plasma mass spectrometry coupled with an automated flow injection system Original Research Article
71
Analysis for chloroanisoles and chlorophenols in cork by stir bar sorptive extraction and gas chromatography–mass spectrometry
72
Analysis for composite zeolite/foam aluminum–water mass recovery adsorption refrigeration system driven by engine exhaust heat
73
Analysis for creep behavior and collapse of thick-section composite structures
74
Analysis for determining surface free energy uncertainty by the Owen–Wendt method
75
Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process
76
Analysis for electrolytic oxidation and reduction of PbSO4/Pb electrode by electrochemical QCM technique
77
Analysis for endogenous and recombinant porcine somatotropine in serum Original Research Article
78
Analysis for fabrication errors of arrayed waveguide grating multiplexers
79
Analysis for hydrogen particle balance of plasma-wall system in the large helical device
80
Analysis for joint importance of components in a coherent system
81
Analysis for loss of coolant accident in a fusion reactor
82
Analysis for low molecular weight phenolic compounds in a red wine aged in oak chips
83
Analysis for low molecular weight phenolic compounds in a red wine aged in oak chips Original Research Article
84
Analysis for Microscopic Hyperbolic Two-Step Heat Transfer Problems
85
Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation
86
Analysis for optimal gate design of thin-walled injection molding
87
Analysis for peptide binding to porphyrin using surface plasmon resonance
88
Analysis for pharmaceutical scientists
89
Analysis for plastic buckling of thin-walled cylinders via non-classical constitutive theory of plasticity
90
Analysis for polycrystal nonproportional cyclic plasticity with a dissipated energy based rule for cross-hardenin
91
Analysis for polycrystal nonproportional cyclic plasticity with a dissipated energy based rule for cross-hardening
92
Analysis for preliminary design of a class of torsionally coupled buildings with horizontal setbacks
93
Analysis for preliminary design of a class of torsionally coupled buildings with horizontal setbacks
94
Analysis for Quadrupled Fixed Point of Contractive-Type Multi-Valued Operators
95
Analysis for seismic response of dry storage facility for spent fuel Original Research Article
96
Analysis for selected pathogens in water used during rinsing of broiler carcasses in small processing operations in Trinidad
97
Analysis for shaping the ITER first wall
98
Analysis for Soluble Solid Contents in Pineapples using NIR Spectroscopy
99
Analysis for Stabilization of Soil Slope in Silty Soil with Replacement of Soil Cement
100
Analysis for superior radiation resistance of InP-based solar cells
101
Analysis for surface probes of third experimental campaign in the large helical device
102
Analysis for sustainability in management of water scarce basins: the case of the Gediz River Basin in Turkey Original Research Article
103
Analysis for the dual-phase-lag bio-heat transfer during magnetic hyperthermia treatment
104
Analysis for the interlaminar stresses of thin layered composites subjected to thermal loads
105
ANALYSIS FOR THE PROVISONS ABOUT THE RENTAL AGREEMENT OF THE CODE OF OBLIGATIONS
106
Analysis for the stabilization of impulsive control Liu’s system q
107
Analysis for the wear resistance anisotropy of diamond cutting tools in theory and experiment
108
Analysis for wine C5–C8 aldehydes through the determination of their O-(2,3,4,5,6pentafluorobenzyl)oximes formed directly in the solid phase extraction cartridge
109
Analysis for wine C5–C8 aldehydes through the determination of their O-(2,3,4,5,6-pentafluorobenzyl)oximes formed directly in the solid phase extraction cartridge Original Research Article
110
Analysis for zearalenone and (alpha)-zearalenol in cereals and swine feed using accelerated solvent extraction and liquid chromatography with fluorescence detection
111
Analysis for zearalenone and α-zearalenol in cereals and swine feed using accelerated solvent extraction and liquid chromatography with fluorescence detection Original Research Article
112
ANALYSIS GAZI UNIVERSITY FACULTY OF EDUCATION MUSIC TEACHING PROGRAMMES’ PIANO STUDENTS’ ANXIETY LEVEL
113
Analysis Gender Role and Factors Affecting Soil and Water Conservation Adoption in Kersa Districts of Eastern Hararghe Zone, Ethiopia: The Case of Fanya Juu, Soil and Stone Bund Measure
114
Analysis high frequency of RF MEMS switches with electrostatic actuation
115
Analysis implicates alcohol in breast cancer
116
Analysis in a finite time-frequency plane
117
Analysis in distribution of two randomized algorithms for finding the maximum in a broadcast communication model
118
Analysis in indexing: document and domain centered approaches
119
Analysis in the Accuracy of Classification in Students’ Graduate School Entrance
120
Analysis in the Rat of 4-Hydroxynonenal Metabolites Excreted in Bile: Evidence of Enterohepatic Circulation of These Byproducts of Lipid Peroxidation
121
Analysis in Vitro of the Enzyme CRTISO Establishes a Poly-cis-Carotenoid Biosynthesis Pathway in Plants
122
Analysis Mechanization Skill of Wheat Farmers in Khoramabad Township, Iran
123
Analysis method and characterization of the antioxidant capacity of vitamin E-interactive polysulfone hemodialyzers
124
Analysis method and utilization mechanism of the overall value of EV charging
125
Analysis Method Development of Formic Acid dan Lactic Acid as Acidifier in Animal Fed Using High Performance Liquid Chromatography
126
Analysis method for bonded patch repair of a skin with a cutout
127
Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools
128
Analysis method for jet-like three-particle azimuthal correlations
129
Analysis method for jet-like three-particle azimuthal correlations
130
Analysis method for search for B0→l+l− at Belle experiment
131
Analysis Method for Spherical Dipole Antenna Array
132
Analysis method of Charpy V-notch impact data before and after electron beam welding reconstitution
133
Analysis method of planar cracks of arbitrary shape in the isotropic plane of a three-dimensional transversely isotropic magnetoelectroelastic medium
134
Analysis method of planar interface cracks of arbitrary shape in three-dimensional transversely isotropic magnetoelectroelastic bimaterials
135
Analysis methods and reference concentrations of 12 minor and trace elements in fish blood plasma
136
Analysis methods for facial motion
137
Analysis methods for multi-component wave measurements on board the DEMETER spacecraft
138
Analysis Methods for Observational Studies: Effects of Cardiac Rehabilitation on Mortality of Coronary Patients
139
Analysis methods in neutron and X-ray reflectometry
140
Analysis methods of CT-scan images for the characterization of the bone texture: First results
141
Analysis Methods of EEG Signals: A Review in EEG Application for Brain Disorder
142
Analysis methods of ginsenosides
143
Analysis mitral valve blood flow velocity in early and late diastole in 3460 health subjects by pulsed Doppler echocardiography
144
Analysis model to simulate the cracked pipe buried in soil
145
Analysis model visualization and graphical analysis attribute specification system
146
Analysis of (Ba,Ca,Sr)3MgSi2O8:Eu2+, Mn2+ phosphors for application in solid state lighting
147
Analysis of (NH4)2SO4/(NH4)H2PO4 mixtures by thermogravimetry and X-ray diffraction
148
Analysis of [2H7]methionine, [2H4]methionine, methionine, [2H4]homocysteine and homocysteine in plasma by gas chromatography–mass spectrometry to follow the fate of administered [2H7]methionine
149
Analysis of [3′,3′-d2]-nicotine and [3′,3′-d2]-cotinine by capillary liquid chromatography–electrospray tandem mass spectrometry
150
Analysis of [H−1,L2,L2] first-order system least squares for the incompressible Oseen type equations Original Research Article
151
Analysis of `stackedʹ whispering gallery dielectric resonators for submillimeter ESR spectroscopy
152
Analysis of {[N,N-dialkylamide or 1-methyl-2-pyrrolidone] + 1-chloroalkane or α,ω-dichloroalkane} mixtures in terms of group contribution
153
Analysis of {[N,N-dialkylamide or 1-methyl-2-pyrrolidone] + 1-chloroalkane or α,ω-dichloroalkane} mixtures in terms of group contribution
154
Analysis of ‘blinking’ or ‘hopping’ single molecule signals with a limited number of transitions
155
Analysis of ‘classical’ deposition rate law for crystallisation fouling
156
Analysis of “Amitraz (sum)” in pears with incurred residues – Comparison of the approach covering the individual metabolites via LC–MS/MS with the approach involving cleavage to 2,4-dimethylaniline
157
Analysis of “Bimbam”, a novel glucocorticoid-induced BH3-only transcript in cell lines and children with acute lymphoblastic leukemia
158
Analysis of “Evaluation of Cybersecurity Culture and Awareness Scale (ECSCAS)” based on Polychotomous models of Item Response Theory (IRT)
159
Analysis of “reservoir–well” system conditions using functional diagnostic methods
160
Analysis of 1,076 cases of sexual assault
161
Analysis of 1.5 Tesla proton MR spectra of human brain using LCModel and an imported basis set
162
Analysis of 10 years’ flight data of solar cell monitor on ETS-V
163
Analysis of 100 pharmaceuticals and their degradates in water samples by liquid chromatography/quadrupole time-of-flight mass spectrometry
164
Analysis of 100 years of curriculum designs
165
Analysis of 1089 burn patients in province of Kurdistan, Iran
166
Analysis of 109 Japanese childrenʹs lip and nose shapes using 3-dimensional digitizer
167
Analysis of 10B by PIGE with factor analytical γ-ray peak identification
168
Analysis of 112 Patients for Histopathological Assessment of Oral Lesions Through Oral Biopsy: The Observational study
169
Analysis of 113 hospitalized patients with confirmed 2009 influenza A (H1N1) virus infection
170
Analysis of 12 beta-lactam antibiotics in human plasma by HPLC with ultraviolet detection
171
Analysis of 12 different pentacyclic triterpenic acids from frankincense in human plasma by high-performance liquid chromatography and photodiode array detection
172
Analysis of 129I in groundwater samples: Direct and quantitative results below the drinking water standard
173
Analysis of 135 Cases of Pediatric Henoch-Schönlein Purpura in Gansu, Northwestern China
174
Analysis of 137Cs and 239,240Pu concentrations in surface waters of the Pacific Ocean
175
Analysis of 140 pesticides from conventional farming foodstuff samples after extraction with the modified QuECheRS method
176
Analysis of 150 Patients With Carcinoid Syndrome Seen in a Single Year at One Institution in the First Decade of the Twenty-First Century
177
Analysis of 16 teenage patients with sickle cell anemia and musculoskeletal complications
178
Analysis of 16th Century Qazw n Manuscripts by Raman Microscopy and Remote Laser Raman Microscopy
179
Analysis of 17 polar to semi-polar pesticides in the Ebro river delta during the main growing season of rice by automated on-line solid-phase extraction-liquid chromatography–tandem mass spectrometry
180
Analysis of 18 perfluorinated compounds in river waters: Comparison of high performance liquid chromatography–tandem mass spectrometry, ultra-high-performance liquid chromatography–tandem mass spectrometry and capillary liquid chromatography–mass spectrom
181
Analysis of 18F-labelled synthesis products on TLC plates: Comparison of radioactivity scanning, film autoradiography, and a phosphoimaging technique
182
Analysis of 19F and 13C NMR spectra of tetrafluorophthalic anhydride and its derivatives
183
Analysis of 1H-NMR relaxation time distributions in L1 to L6 rat lumbar vertebrae
184
Analysis of 1-nitropyrene in air particulate matter standard reference materials by using two-dimensional high performance liquid chromatography with online reduction and tandem mass spectrometry detection
185
Analysis of 1st- 3rd Grade Life Science Curriculums In Terms of Acquisition and Activities Related to Food and Nutrition
186
Analysis of 2,4,6-trinitrotoluene, pentaerythritol tetranitrate and cyclo-1,3,5-trimethylene-2,4,6-trinitramine using negative corona discharge ion mobility spectrometry
187
Analysis of 2,4-D residues in soil profile using HYDRUS-1D model
188
ANALYSIS OF 200 CASES OF LIVER TRAUMA: PROSPECTIVE STUDY
189
Analysis of 200 food items for benzo[a]pyrene and estimation of its intake in an epidemiologic study
190
Analysis of 2000 consecutive UK tonsillectomy specimens for disease-related prion protein
191
Analysis of 210Pb in sediment trap samples and sediments from the northern Arabian Sea: evidence for boundary scavenging
192
Analysis of 227Ac in seawater by delayed coincidence counting
193
Analysis of 232 total fertilization failure cycles during intracytoplasmic sperm injection
194
Analysis of 232Th/230Th in volcanic rocks: a comparison of thermal ionization mass spectrometry and other methodologies
195
Analysis of 239Pu, 244Cm and 243Am alpha spectra using the unfolding code Colégram without prior use of a nuclear data library
196
Analysis of 239Pu, 244Cm and 243Am alpha spectra using the unfolding code Colégram without prior use of a nuclear data library
197
Analysis of 27 polycyclic aromatic hydrocarbons by matrix solid-phase dispersion and isotope dilution gas chromatography-mass spectrometry in sewage sludge from the Spanish area of Madrid
198
Analysis of 2-alkylcyclobutanones for detection of food irradiation: Current status, needs and prospects
199
Analysis of 2-alkylcyclobutanones for detection of food irradiation: Current status, needs and prospects
200
Analysis of 2-aminoacetophenone by direct-immersion solid-phase microextraction and gas chromatography–mass spectrometry and its sensory impact in Chardonnay and Pinot gris wines
201
Analysis of 2-aminoacetophenone in wine using a stable isotope dilution assay and multidimensional gas chromatography–mass spectrometry
202
Analysis of 2D and 3D circular braiding processes: Modeling the interaction between the process parameters and the pre-form architecture
203
ANALYSIS OF 2-D AND 3-D UNSTEADY ANNULAR FLOWS WITH OSCILLATING BOUNDARIES, BASED ON A TIME-DEPENDENT COORDINATE TRANSFORMATION
204
Analysis of 2-D state-space periodically shift-variant discrete systems
205
Analysis of 2D triaxial flat braided textile composites
206
Analysis of 2D triaxial flat braided textile composites
207
Analysis of 2D triaxial flat braided textile composites
208
Analysis of 2-deuterated isopentenyl alcohols by 1H NMR of chiral esters
209
Analysis of 2-methylthio-derivatives of isoprenoid cytokinins by liquid chromatography–tandem mass spectrometry Original Research Article
210
Analysis of 2β-carbomethoxy-3β-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane in rat plasma: I. Method development and validation by capillary electrophoresis
211
Analysis of 2β-carbomethoxy-3β-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane in rat plasma: II. Pharmacokinetic profile in male and female Sprague–Dawley rats evaluated by capillary electrophoresis
212
Analysis of 3,5,6-trichloro-2-pyridinol in urine samples from the general population using gas chromatography–mass spectrometry after steam distillation and solid-phase extraction
213
Analysis of 35 priority semivolatile compounds in water by stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry: I. Method optimisation
214
Analysis of 35 priority semivolatile compounds in water by stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry: Part II: Method validation Original Research Article
215
Analysis of 36 Reported Cases of Late Thrombosis in Drug-Eluting Stents Placed in Coronary Arteries
216
Analysis of 3D bone ingrowth into polymer scaffolds via micro-computed tomography imaging
217
Analysis of 3D cracks in anisotropic multi-material domain with weakly singular SGBEM
218
Analysis of 3D elliptical vibration cutting with thin shear plane model
219
Analysis of 3D fluid driven crack propagation problem in co-seismic slip under P- and S-waves by hybrid hypersingular integral method
220
Analysis of 3-d folded polygonal loop antennas
221
Analysis of 3D In-situ Stress Field and Query Systemʹs Development Based on Visual BP Neural Network
222
Analysis of 3-D interconnect structures with PEEC using SPICE
223
Analysis of 3-D myocardial motion in tagged MR images using nonrigid image registration
224
Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel
225
Analysis of 3D problems using a new enhanced strain hexahedral element
226
Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorption
227
Analysis of 3D rolling forming with generalized rigid-plastic boundaries approach
228
Analysis of 3D solids using the natural neighbour radial point interpolation method Original Research Article
229
Analysis of 3D structures of platinum nanoparticles by high energy X-ray diffraction and reverse Monte Carlo simulations
230
Analysis of 3D time-dependent acoustic problems via a generic BE substructuring algorithm based on iterative solvers
231
Analysis of 3D transient blood flow passing through an artificial aortic valve by Lattice–Boltzmann methods
232
Analysis of 3-dimentional track parameters from 2-dimensional images of etched tracks in solid polymeric track detectors
233
Analysis of 3-dimentional track parameters from 2-dimensional images of etched tracks in solid polymeric track detectors
234
Analysis of 3gpp-MAC and two-key 3gpp-MAC Original Research Article
235
Analysis of 3-hydroxy-3-methylglutaryl-coenzyme A reductase inhibitors using liquid chromatography–electrospray mass spectrometry
236
Analysis of 3p allelic loss in papillary and nonpapillary renal cell carcinomas: Correlation with tumor karyotypes
237
Analysis of 3p Allelic Losses in Renal Cell Carcinomas: Comparison with Cytogenetic Results
238
Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China
239
Analysis of 4/sup th/-order LCLC resonant power converters
240
Analysis of 42 Consecutive Cases of Empyema Thoracis
241
Analysis of 4-hydroxyproline using 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol derivatization and micellar electrokinetic chromatography combined with laser-induced fluorescence detection
242
Analysis of 4-nonylphenols, phthalates, and polychlorinated biphenyls in soils and biosolids
243
Analysis of 4πγ ionization chamber response using EGS4 Monte Carlo code
244
Analysis of 50-year wind data of the southern Baltic Sea for modelling coastal morphological evolution – a case study from the Darss-Zingst Peninsula
245
Analysis of 57 elements in Japanese soils, with special reference to soil group and agricultural use
246
Analysis of 5HT3Ra gene expression by real time PCR in Systemic Lupus Erythematosis (SLE) patients
247
Analysis of 5HT3Ra gene expression by real time PCR in Systemic Lupus Erythematosus (SLE) patients
248
Analysis of 5-hydroxymethyl-2-furoic acid (HMFA) the main metabolite of alimentary 5-hydroxymethyl-2-furfural (HMF) with HPLC and GC in urine
249
Analysis of 5-hydroxymethylfurfural in foods by gas chromatography–mass spectrometry
250
Analysis of 6174delT Mutation in BRCA2 Gene by Mutagenically Separated PCR Among Libyan Patients with Breast Cancer
251
Analysis of 686 expressed sequence tags (ESTs) from the intertidal harpacticoid copepod Tigriopus japonicus (Crustacea, Copepoda)
252
Analysis of 7 synthetic musks in cream by supported liquid extraction and solid phase extraction followed by GC–MS/MS
253
Analysis of 70 Environmental Protection Agency priority pharmaceuticals in water by EPA Method 1694
254
Analysis of 8681 neonates with transposition of the great arteries: outcomes with and without Rashkind balloon atrial septostomy
255
Analysis of 8-hydroxy-2′-deoxyguanosine in human urine using hydrophilic interaction chromatography with tandem mass spectrometry
256
Analysis of 8-hydroxy-2′-deoxyguanosine in urine using high-performance liquid chromatography–electrospray tandem mass spectrometry
257
Analysis of 8-oxo-7,8-dihydro-2′-deoxyguanosine by ultra high pressure liquid chromatography–heat assisted electrospray ionization–tandem mass spectrometry
258
Analysis of 95 cases of squamous cell carcinoma of the external and middle ear
259
Analysis of 9th Grade Physics Coursebook from an Educational, Visual and Language Perspective
260
Analysis of a (Q, r, T) inventory policy with deterministic and random yields when future supply is uncertain
261
Analysis of a “barb test” for measuring the mixed-mode delamination toughness of coatings Original Research Article
262
Analysis of a “cluster” strategy for introducing hydrogen vehicles in Southern California
263
Analysis of a “humanized” phospholamban mouse model reveals new pathways linking Ca2+ cycling and cardiac electrophysiology
264
Analysis of a 1 kW residential combined heating and power system based on solid oxide fuel cell
265
Analysis of a 30 kbp plasmid encoding histidine decarboxylase gene in Tetragenococcus halophilus isolated from fish sauce
266
Analysis of a 30-year rainfall record (1967–1997) in semi–arid SE Spain for implications on vegetation
267
Analysis of a 3D boundary layer model at local scale: Validation on soybean surface radiative measurements
268
Analysis of a 3D chaotic system
269
Analysis of a bacteria–immunity model with delay quorum sensing
270
Analysis of a ball screw with a preload and lubrication
271
Analysis of a Batch Arrival Retrial Queue with Two-Phase Services, Feedback and Admission
272
Analysis of a bayonet tube heat exchanger
273
Analysis of a beach as a time-invariant linear input/output system of marine litter
274
Analysis of a Beam under Moving Loads
275
Analysis of a bending test on a full-scale PWR hot leg elbow containing a surface crack
276
Analysis of a bending test on a full-scale PWR hot leg elbow containing a surface crack
277
Analysis of a bending test on a full-scale PWR hot leg elbow containing a surface crack Original Research Article
278
Analysis of a BICS-only concurrent error detection method
279
Analysis of a bifurcation problem Original Research Article
280
Analysis of a bi-piezoelectric ceramic layer with an interfacial crack subjected to anti-plane shear and in-plane electric loading
281
Analysis of a bipolar energy-transport model for a metal-oxide-semiconductor diode
282
Analysis of a blow-molded HDPE bottle that failed by brittle fracture
283
Analysis of a boiler pipe rupture
284
Analysis of a boron dilution accident for WWER-440 combining the use of the codes DYN3D and SiTap
285
Analysis of A Braced Excavation In Soft Soils Considering The Consolidation Effect
286
Analysis of a bridge collapsed by an accidental blast loads
287
Analysis of a bridge failure due to fire using computational fluid dynamics and finite element models
288
Analysis of a bulk queue with N-policy multiple vacations and setup times
289
Analysis of a BWR Turbine Trip Experiment by Entire Plant Simulation with Spatial Kinetics
290
Analysis of a Cahn–Hilliard–Ladyzhenskaya system with singular potential
291
Analysis of a Campus-Wide Wireless Network
292
Analysis of a capacitive-filter, half-wave rectifier fed by a parallel-load resonant tank
293
Analysis of a carbon dioxide transcritical power cycle using a low temperature source
294
Analysis of a Cartesian PML approximation to acoustic scattering problems in
295
Analysis of a case of the foreign accent syndrome in terms of the framework of gestural phonology
296
Analysis of a causal diffusion model and its backwards diffusion problem
297
Analysis of a cDNA sequence encoding the immunoglobulin heavy chain of the Antarctic teleost Trematomus bernacchii
298
Analysis of a cDNA-derived sequence of a novel mannose-binding lectin, codakine, from the tropical clam Codakia orbicularis
299
Analysis of a cell-cycle promoter bound by a response regulator
300
Analysis of a cellulose cross-linking treatment of linen fabric using thermogravimetry
301
Analysis of a central crack normal to a piezoelectric–orthotropic interface
302
Analysis of a Circular Code Model
303
ANALYSIS OF A CIRCULAR WAVEGUIDE LOADED WITH DIELECTRIC AND METAL DISCS
304
Analysis of a class of discrete-time systems with power rule
305
Analysis of a class of distributed delay logistic differential equations
306
Analysis of a Climbing Parallel Robot for Construction Applications
307
ANALYSIS OF A COAXIAL WAVEGUIDE CORRUGATED WITH WEDGE-SHAPED RADIAL VANES CONSIDERING AZIMUTHAL HARMONIC EFFECTS
308
Analysis of a cofferdam support and design implications
309
Analysis of a collocation method for integrating rapidly oscillatory functions
310
Analysis of a coloured Dutch map from the eighteenth century: The need for a multi-analytical spectroscopic approach using portable instrumentation Original Research Article
311
Analysis of a combined converter-electromagnetic device by taking into account its control loop
312
Analysis of a combined power and ejector-refrigeration cycle using low temperature heat
313
Analysis of a combined power and refrigeration cycle by the exergy method
314
Analysis of a combined Rankine–vapour–compression refrigeration cycle
315
Analysis of a complex crop production system in interdependent agro-ecological zones: a methodological approach for potatoes in Argentina
316
Analysis of a complex polysaccharide (gum arabic) by multi-angle laser light scattering coupled on-line to size exclusion chromatography and flow field flow fractionation
317
Analysis of a complex toppling-circular slope failure
318
Analysis of a compression shear fracture test for curved interfaces in layered composites
319
ANALYSIS OF A COMPUTER-AIDED TELEOPERATION PROCESS BY MEANS OF GENERALIZED STOCHASTIC PETRI NETS
320
Analysis of a conjugated infinite element method for acoustic scattering
321
Analysis of a consensus fragment in ERIC-PCR fingerprinting of Enterobacter sakazakii
322
Analysis of a constitutional balanced translocation T(1;17)(p36;q 11.2-12.1) in a neuroblastoma patient
323
Analysis of a contention-based opportunistic spectrum access under general channel activity model
324
Analysis of a continuous car-following model for a bus route: existence, stability and bifurcations of synchronous motions
325
Analysis of a continuum-based beam element in the framework of explicit-FEM
326
Analysis of a coronal loop on the limb Original Research Article
327
Analysis of a counter-current vapor flow absorber
328
Analysis of a coupled pair of Cahn-Hilliard equations with nondegenerate mobility
329
Analysis of a coupled system of equations of a global geodynamic model of the earth Original Research Article
330
Analysis of a coupled-channel continuum approach for spectra of mass-17 compound systems
331
Analysis of a crack in a finite thermopiezoelectric plate under heat flux
332
Analysis of a crack in a functionally graded strip with a power form shear modulus
333
Analysis of a crack in a half-plane piezoelectric solid with traction-induction free boundary
334
Analysis of a cryolava flow-like feature on Titan
335
Analysis of a curved beam on uncertain elastic foundation
336
ANALYSIS OF A CYLINDRICAL BEARING WITH HELICAL GROOVES AND A BRANCHING GAS LUBRICANT FLOW IN VARIOUS OPERATING MODES
337
ANALYSIS OF A CYLINDRICAL BEARING WITH HELICAL GROOVES AND A BRANCHING GAS LUBRICANT FLOW IN VARIOUS OPERATING MODES
338
Analysis of a database of public domain Brazilian patent documents based on the I PC
339
Analysis of a DC motor drive in the presence of unbalance
340
Analysis of a deep well recharge experiment by calibrating a reactive transport model with field data
341
Analysis of a defect correction method for viscoelastic fluid flow
342
Analysis of a defective renewal equation arising in ruin theory
343
Analysis of a delayed predator–prey system with impulsive diffusion between two patches
344
Analysis of a delayed SIR model subject to multiple infectious stages and nonlinear incidence rate
345
Analysis of a dengue disease transmission model
346
Analysis of a detention basin impact on dike failure probabilities and flood risk for a channel-dike-floodplain system along the river Elbe, Germany
347
Analysis of a dielectric crack in a magnetoelectroelastic layer
348
Analysis of a diesel generator crankshaft failure
349
Analysis of a diesel generator cylinder failure
350
Analysis of a differential equation model of HIV infection of CD4+ T -cells with saturated reverse function
351
Analysis of a dimethacrylate copolymer (Bis-GMA and TEGDMA) network by DSC and 13C solution and solid-state NMR spectroscopy
352
Analysis of a diode-pumped Nd:YVO4 laser passively Q switched with GaAs
353
Analysis of a direct expansion solar assisted heat pump using different refrigerants
354
Analysis of a directional hydraulic valve by a Direct Numerical Simulation using an immersed-boundary method
355
Analysis of a discrepancy in electron–beam dose comparison between chemical dosimeters and a calorimeter
356
Analysis of a discrete-time GI–G–1 queueing model subjected to bursty interruptions
357
Analysis of a Discrete-Time Impatient Customer Queue with Bernoulli-Schedule Vacation Interruption
358
Analysis of a discrete-time preemptive resume priority buffer
359
Analysis of a discrete-time queue with gated priority
360
Analysis of a discrete-time queue with general three-state Markovian traffic sources
361
Analysis of a disk-type stator for the piezoelectric ultrasonic motor using impedance matrix
362
Analysis of a dissimilar finite wedge under antiplane deformation
363
Analysis of a distributed group technology methodology
364
Analysis of a Dominant Retailer Dual-Channel Supply Chain under Customers’ Channel Preference: The α-Branch and Bound Solution Algorithm
365
Analysis of a double pipe heat exchanger performance by use of porous baffles and pulsating flow
366
Analysis of a double step microstrip discontinuity using generalized transmission line equations
367
ANALYSIS OF A DOUBLE-LAYERED VIVALDI ANTENNA INSIDE A METALLIC ENCLOSURE
368
Analysis of a DPSK soliton transmission system
369
Analysis of a drift–diffusion model with velocity saturation for spin-polarized transport in semiconductors
370
Analysis of a dry friction problem under small displacements: application to a bolted joint
371
Analysis of a dual sourcing inventory model with normal unit demand and Erlang mixture lead times
372
Analysis of a dynamic contact problem for electro-viscoelastic cylinders Original Research Article
373
Analysis of a Dynamic Frictional Contact Problem for Thermo-Elastic-Viscoplastic Materials with Damage
374
Analysis of a dynamic frictional contact problem with damage
375
Analysis of a Dynamic Voltage Compensator With Reduced Switch-Count and Absence of Energy Storage System
376
Analysis of a European TMF inter-comparison exercise
377
Analysis of a failed alumina THR ball head
378
Analysis of a failed Detroit Diesel series 149 generator
379
Analysis of a failed spur gear from a Vibro-Hammer
380
Analysis of a fatal bungee-jumping accident
381
Analysis of a feasible polygeneration system for power and methanol production taking natural gas and biomass as materials
382
Analysis of a feasible tariff policy for the introduction of high efficiency electric motors in Brazil
383
Analysis of a feed and bleed procedure sensitivity study, performed with the SIPACT simulator, on a French 900 MWe NPP Original Research Article
384
Analysis of a femoral hip prosthesis designed to reduce stress shielding
385
Analysis of a ferroresonant circuit using bifurcation theory and continuation techniques
386
Analysis of a ferroresonant circuit with chaotic behavior by means of a Chua-type magnetization model
387
Analysis of a Few Words in Shahnameh: East and Northwest Iranian
388
Analysis of a fibre laser welding case study, utilising a matrix flow chart
389
Analysis of a finite buffer model with two servers and two nonpreemptive priority classes
390
Analysis of a Finite Buffer with Non-preemptive Priority Scheduling
391
Analysis of a finite element numerical solution for a nonlinear seepage flow model in a deformable dual media fractal reservoir
392
ANALYSIS OF A FINITE-DIFFERENCE SCHEME FOR A LINEAR ADVECTION–DIFFUSION–REACTION EQUATION
393
Analysis of a finite-difference scheme for a singularly perturbed problem with two small parameters
394
Analysis of a firn core for assessing POP seasonal accumulation on an Alpine glacier
395
Analysis of a FitzHugh-Nagumo-Rall model of a neuronal network
396
Analysis of a flexible web on a grooved concave surface under softEHL
397
Analysis of a fluid-loaded thick plate
398
Analysis of a fluorescence depletion process of Rhodamine 6G in a PMMA matrix induced by nano- and picosecond lasers
399
ANALYSIS OF A FORCED STRONGLY NON-LINEAR TWO-DEGREE-OF-FREEDOM SYSTEM BY MEANS OF THE POWER-SERIES METHOD
400
Analysis of a fractional SIQR model with Caputo-Fabrizio derivative
401
Analysis of a Fractional-Step Method on Overset Grids
402
Analysis of a Framework for E-Commerce Consumer Behavior before and During Covid-19
403
Analysis of a free surface film from a controlled liquid impinging jet over a rotating disk including conjugate effects, with and without evaporation
404
Analysis of a frictional–kinetic model for gas–particle flow
405
Analysis of a fuel cell micro-grid with a small-scale wind turbine generator
406
Analysis of a full spectrum hybrid lighting system
407
Analysis of a functional lactate permease in the fungus Rhizopus
408
Analysis of a Functionally Graded Finite Wedge Under Antiplane Deformation
409
Analysis of a functionally graded particulate composite under flexural loading conditions
410
Analysis of a fuzzy economic order quantity model for deteriorating items under retailer partial trade credit financing in a supply chain
411
Analysis of a gas-phase partitioning tracer test conducted in an unsaturated fractured-clay formation
412
Analysis of a GC/MS Thermal Desorption System with Simultaneous Sniffing for Determination of Off-Odor Compounds and VOCs in Fumes Formed during Extrusion Coating of Low-Density Polyethylene
413
Analysis of a Gelatin Factory Farm Product (Wheat)
414
Analysis of a general limited scheduling mechanism for a distributed communication system
415
Analysis of a general service nonexhaustive polling system using a heuristic combination method and pseudoconservation law
416
Analysis of a GI/M/1 queue with multiple working vacations
417
Analysis of a giant lightning storm on Saturn
418
Analysis of a ginger extract by high-performance liquid chromatography coupled to nuclear magnetic resonance spectroscopy using superheated deuterium oxide as the mobile phase
419
Analysis of a glass fibre reinforced polyurethane composite repair system for corroded pipelines at elevated temperatures
420
Analysis of a glucocorticoid–estrogen receptor chimera reveals that dimerization energetics are under ionic control Original Research Article
421
Analysis of a hard strip-loaded conical horn by the method of generalized scattering matrices
422
Analysis of a harvested discrete-time biological models
423
Analysis of a heat recirculating cooler for fuel gas sulfur removal in solid oxide fuel cells
424
Analysis of a helical quadrupole focusing channel
425
Analysis of a helical quadrupole focusing channel
426
Analysis of a heuristic for acyclic edge colouring
427
Analysis of a high intensity shear zone between overlapping fiber ends in a polymer matrix composite
428
Analysis of a high power ferrite differential phase shift circulator operating above ferrimagnetic resonance
429
Analysis of a high temperature heater in a false twist texturing process
430
Analysis of a high throughput n-dodecane fueled heterogeneous/homogeneous parallel plate microreactor for portable power conversion
431
Analysis of a high-concentration copper in metal alloys by emission spectroscopy of a laser-produced plasma in air at atmospheric pressure
432
Analysis of a high-order iterative learning control algorithm for uncertain nonlinear systems with state delays
433
Analysis of a high-power-factor AC-DC converter with reduced current and voltage stresses
434
Analysis of a high-resolution optical wave-front control system
435
Analysis of a high-temperature heat exchanger for an externally-fired micro gas turbine
436
Analysis of a historical extirpation of the bearded vulture Gypaetus barbatus (L.) in the western Alps (France-Italy): Former distribution and causes of extirpation Original Research Article
437
Analysis of a hybrid composite/metal bolted connection subjected to flexural loading
438
Analysis of a hydrodynamic thrust bearing with elastic deformation using a recurrent neural network
439
Analysis of a hydrogen station roll-out strategy to introduce hydrogen vehicles in Andalusia
440
Analysis of a hydrometallurgical route to recover base metals from spent rechargeable batteries by liquid–liquid extraction with Cyanex 272
441
Analysis of a hydrostatic transmission driveline for its use in off-road multiple axle vehicles
442
Analysis of a hydrostatic transmission system using low speed high torque motor
443
Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused Biological Tissues with Laser Heating
444
Analysis of a Hyperbolic System Modelling the Thermoelastic Impact of Two Rods
445
Analysis of a hysteretic circuit containing an iron-cored inductor and a semiconductor switch
446
Analysis of a J69-T-25 engine turbine blade fracture
447
Analysis of a Japan government intervention on the domestic agriculture market
448
Analysis of a Jet Pump Performance under Different Primary Nozzle Positions and Inlet Pressures using two Approaches: One Dimensional Analytical Model and Three Dimensional CFD Simulations
449
Analysis of a jet–mixing layer interaction
450
Analysis of a jet-pump-assisted vacuum desalination system using power plant waste heat Original Research Article
451
Analysis of a kernel-based method for some pricing financial options
452
Analysis of a kinetic cellular model for tumor-immune system interaction
453
Analysis of a laboratory jigging system for improved performance
454
Analysis of a lagoon ecological model with anoxic crises and impulsive harvesting
455
Analysis of a laminated anisotropic plate by Chebyshev collocation method
456
Analysis of a Large Database of GCL Internal Shear Strength Results
457
Analysis of a Large Eddy Simulation model based on anisotropic filtering
458
Analysis of a large number of vias and differential signaling in multilayered structures
459
Analysis of a latent thermocline storage system with encapsulated phase change materials for concentrating solar power
460
Analysis of a LEACHN-based management technique in ‘predictive mode’
461
Analysis of a leap-frog pseudospectral scheme for the Schrِdinger equation
462
Analysis of a least-squares finite element method for the thin plate problem
463
Analysis of a Left-Shift Binary GCD Algorithm
464
Analysis of a Leslie–Gower-type prey–predator model with periodic impulsive perturbations
465
Analysis of a Linear Induction Motor with Solid Iron Secondary
466
Analysis of a link of embrittlement mechanisms and neutron flux effect as applied to reactor pressure vessel materials of WWER
467
Analysis of a loaded elastic wheel rolling down a circular track
468
Analysis of a Local Search Heuristic for Facility Location Problems
469
Analysis of a long-lasting haze episode in Nanjing, China
470
Analysis of a long-period grating inscribed in the core of a fibre with inverse parabolic-index cladding
471
Analysis of a long-term pumping and tracer test using the channel network model
472
ANALYSIS OF A LOSSY MICRORING USING THE GENERALIZED MULTIPOLE TECHNIQUE
473
Analysis of a Lotka–Volterra food chain chemostat with converting time delays
474
Analysis of a low-complexity change detection scheme
475
Analysis of a Low-Pass Filter Employing a 4-Pin Capacitor
476
Analysis of a magnetic refrigerator
477
Analysis of a major load island outage on the Potomac Electric Power Company system
478
Analysis of a Major Phenolic Glucoside and Biochemistry Compounds from Curculigo Orchioides Gaertn
479
Analysis of a Malakisi barn used for tobacco curing in East and Southern Africa
480
ANALYSIS OF A MALARIA DISEASE MODEL WITH DIRECT TRANSMISSION
481
Analysis of a Malaria Transmission Model in Children
482
Analysis of a martensitic stainless steel that failed due to the presence of coarse carbides
483
Analysis of a mathematical model for tuberculosis: What could be done to increase case detection
484
Analysis of a mathematical model for tumor growth under indirect effect of inhibitors with time delay in proliferation
485
Analysis of a Mathematical Model of Protocell
486
Analysis of a mathematical model of the effect of inhibitors on the growth of tumors
487
Analysis of a Mathematical Model of the Growth of Necrotic Tumors
488
Analysis of a Mathematical Model to Investigate the Dynamics of Dengue Fever
489
Analysis of a measured neutron background below 6 MeV for fast-neutron imaging systems
490
Analysis of a measured neutron background below 6 MeV for fast-neutron imaging systems
491
Analysis of a mechanical pulp and paper mill using advanced composite curves
492
Analysis of a mechanical vapor compression desalination system Original Research Article
493
Analysis of a melting model for an extruder with reciprocation
494
Analysis of a membrane based air-dehumidification unit for air conditioning in tropical climates
495
ANALYSIS OF A MEMBRANE SAFETY DEVICE WITH A RUPTURE ROD
496
ANALYSIS OF A MEMBRANE SAFETY DEVICE WITH A RUPTURE ROD
497
Analysis of a MEMS transmission line
498
Analysis of a mesoscale infiltration and water seepage test in unsaturated fractured rock: Spatial variabilities and discrete fracture patterns
499
Analysis of a metal hydride cold storage module
500
Analysis of a metal hydride reactor for hydrogen storage
501
Analysis of a metallic reflector grating with the influence of the Joule loss taken into account
502
Analysis of a method for extracting angularly collimated UCNs from a volume without losing the density inside
503
Analysis of a method for extracting angularly collimated UCNs from a volume without losing the density inside
504
Analysis of a Microbial Community Oxidizing Inorganic Sulfide and Mercaptans
505
Analysis of a micropolarizer array-based simultaneous phase-shifting interferometer
506
Analysis of a microscale ‘Saturation Phase-change Internal Carnot Engine’
507
Analysis of a minimal model for p53 oscillations
508
Analysis of a mixed finite element method for the Reissner-Mindlin plate problems Original Research Article
509
Analysis of a mixed semi-implicit/implicit algorithm for low-frequency two-fluid plasma modeling
510
Analysis of a mixture containing ampicillin anhydrate and ampicillin trihydrate by thermogravimetry, oven heating, differential scanning calorimetry, and X-ray diffraction techniques
511
Analysis of a mixture containing ampicillin anhydrate and ampicillin trihydrate by thermogravimetry, oven heating, differential scanning calorimetry, and X-ray diffraction techniques Original Research Article
512
Analysis of a mode-I crack perpendicular to an imperfect interface
513
Analysis of a model for pH-sensitive hydrogels
514
Analysis of a model for the dynamics of prions II ✩
515
Analysis of a model for the pathogenesis of AIDS
516
Analysis of a model of membrane potential for a skin receptor
517
Analysis of a Model Predator-Prey System with Refuges
518
ANALYSIS OF A MODIFIED LOGISTIC MODEL FOR DESCRIBING THE GROWTH OF DURABLE CUSTOMER GOODS IN CHINA
519
Analysis of a modified microbond test for the measurement of interfacial shear strength of an aqueous-based adhesive and a polyamide fibre
520
Analysis of a modified Schrِdinger operator in 2D: Regularity, index, and FEM
521
Analysis of a modified two-lane lattice model by considering the density difference effect
522
Analysis of a Modular Housing Production System Using Simulation
523
ANALYSIS OF A MOLECULAR DYNAMICS SIMULATION OF THE ACETYLCHOLINESTERASE ENZYME AND ITS COMPLEX WITH (AXILLARIDINE-A) INHIBITOR
524
Analysis of a molecular structured population model with possible polynomial growth for the cell division cycle
525
Analysis of a molten carbonate fuel cell: cogeneration to produce electricity and cold water
526
Analysis of a molten carbonate fuel cell: Numerical modeling and experimental validation
527
Analysis of a Monod–Haldene type food chain chemostat with periodically varying substrate
528
Analysis of a monsoon flood event in an ephemeral tributary and its downstream hydrologic effects
529
Analysis of a Monte Carlo boundary propagation method
530
Analysis of a monthly auction for financial transmission rights and flow-gate rights
531
Analysis of a moving crack in a functionally graded strip between two homogeneous layers
532
Analysis of a moving crack in a functionally graded strip between two homogeneous layers
533
Analysis of a Multicomponent Smoking Cessation Project: What Worked and Why
534
Analysis of a multi-frequency electromagnetic imaging functional for thin, crack-like electromagnetic inclusions
535
Analysis of a multigrid method for a transport equation by numerical Fourier analysis
536
Analysis of a Multiple Delays Model for Treatment of Cancer with Oncolytic Virotherapy
537
Analysis of a Multiple M/M/1/DV Queueing System with a Dual-Threshold Policy, Vacation Interruption and a Waiting Server
538
Analysis of a multirate theta-method for stiff ODEs
539
Analysis of a multiresonant forward converter based on nonideal coupling of the transformer
540
Analysis of a multi-server queueing model with MAP arrivals of regular customers and phase type arrivals of special customers
541
Analysis of a multi-server retrial queue with search of customers from the orbit
542
Analysis of a multistate control problem related to food technology
543
Analysis of a multivariate model for detecting browsing pressure by goats in the arid zone of Northern Chile. Application to Bridgesia incisifolia (Bert. ex Cambess) shrublands
544
Analysis of a municipal wastewater treatment plant using a neural network-based pattern analysis
545
Analysis of a Musa spp. somaclonal variant resistant to yellow Sigatoka
546
Analysis of a MV XLPE Cable Termination Design with Embedded Electr
547
Analysis of a national sample of animal drugs in commercial feed in an attempt to statistically determine the causes of poor assay recovery
548
Analysis of a natural resources management system in the Calakmul Biosphere Reserve
549
Analysis of a negative impedance converter as a temperature compensator for bridge sensors
550
ANALYSIS OF A NEUTRONIC COMPUTATIONAL MODEL FOR BOILING WATER REACTOR ASSEMBLY USING MCNP CODE
551
Analysis of a Neutronic Experiment on a Simulated Mercury Spallation Neutron Target Assembly Bombarded by Giga-Electron-Volt Protons
552
Analysis of a new algorithm for continuous-time robust adaptive control
553
Analysis of a new analytical law of heat release rate (HRR) for homogenous charge compression ignition (HCCI) combustion mode versus analytical parameters
554
Analysis of a new chaotic system
555
Analysis of a new design of a multi-stage flash–mechanical vapor compression desalination process Original Research Article
556
Analysis of a new geomorphological inventory of landslides in Valles Marineris, Mars
557
Analysis of a new high resolution upwind compact scheme
558
Analysis of a new high-efficiency DC-to-AC inverter
559
Analysis of a new hypoplastic equation
560
Analysis of a new Kolgan-type scheme motivated by the shallow water equations
561
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine
562
Analysis of a new methodology applied to the desorption of natural gas in activated carbon vessels
563
Analysis of a New MPI Process Distribution for the Weather Research and Forecasting (WRF) Model
564
Analysis of a New Quasi Parallel Resonant DC Link (QPRDCLI)
565
Analysis of a new relationship between monthly global irradiation and sunshine hours from a database of Brazil
566
Analysis of a new specimen for mixed mode fracture tests on brittle materials
567
Analysis of a new stabilized finite element method for the reaction–convection–diffusion equations with a large reaction coefficient
568
Analysis of a new stabilized higher order finite element method for advection–diffusion equations Original Research Article
569
Analysis of a new variational model for multiplicative noise removal
570
Analysis of a newsvendor which has errors in inventory data records
571
Analysis of a nonautonomous model for migratory birds with saturation incidence rate
572
Analysis of a nonautonomous Nicholson Blowfly model
573
Analysis of a non-labeling protein array on biotin modified gold surfaces using atomic force microscopy and surface plasmon resonance
574
Analysis of a nonlinear degenerating PDE system for phase transitions in thermoviscoelastic materials
575
Analysis of a nonlinear fluid–structure interaction problem in velocity–displacement formulation Original Research Article
576
ANALYSIS OF A NONLINEAR FOURTH ORDER DIFFERENTIAL EQUATION
577
ANALYSIS OF A NONLINEAR FOURTH ORDER DIFFERENTIAL EQUATION
578
Analysis of a nonlinear optical response of CN− ions adsorbed on metal electrode: tentative interpretation by means of ab initio molecular calculations Original Research Article
579
Analysis of a nonlinear oscillator with discontinuity
580
Analysis of a non-linear structure by considering two non-linear formulations
581
Analysis of a nonoverlapping domain decomposition method for elliptic partial differential equations
582
Analysis of a nonparametric blind equalizer for discrete-valued signals
583
Analysis of a nonpreemptive priority queue with exponential timer and server vacations
584
Analysis of a nonpreemptive priority queue with SPP arrivals of high class
585
Analysis of a non-volumetric gas-condensate reservoir using a generalized material balance equation with fluid properties from an equation of state
586
Analysis of a normalized QR filter using Bayesian description of propagated data
587
Analysis of a novel absorption refrigeration cycle using centrifugal separation
588
Analysis of a novel autonomous marine hybrid power generation/energy storage system with a high-voltage direct current link
589
Analysis of a novel class of predictive microbial growth models and application to coculture growth
590
Analysis of a novel expanded tip wire (ETW) antenna for microwave ablation of cardiac arrhythmias
591
Analysis of a Novel Flux-Weakening Structure of High-Speed Permanent-Magnet Motors Based on Soft-Magnetic Ferrite Original Research Article
592
Analysis of a novel four-level DC/DC boost converter
593
Analysis of a novel gravity driven organic Rankine cycle for small-scale cogeneration applications
594
Analysis of a novel MEMS-based design of micro-direct methanol fuel cell
595
Analysis of a novel metal hydride cycle for simultaneous heating and cooling
596
Analysis of a novel method of current sharing in a resistive lightning protection terminal
597
Analysis of a novel refrigeration Carnot-type cycle based on isothermal vapour compression
598
Analysis of a novel reverse-flow reactor concept for autothermal methane steam reforming
599
Analysis of a novel solar energy-powered Rankine cycle for combined power and heat generation using supercritical carbon dioxide
600
Analysis of a novel solid state voltage regulator for a self-excited induction generator
601
Analysis of a nuclear pumped lasing mechanism for application to nuclear radiation measurements
602
Analysis of a nuclear pumped lasing mechanism for application to nuclear radiation measurements
603
Analysis of a number and type of publications that editors publish in their own journals: case study of scholarly journals in Croatia
604
Analysis of a one-dimensional random walk with irreversible losses at each step: applications for protein movement on DNA
605
Analysis of a PAH-degrading bacterial population in subsurface sediments on the Mid-Atlantic Ridge
606
Analysis of a parabolic compressible first-order slip Reynolds equation with discontinuous coefficients Original Research Article
607
Analysis of a parabolic cross-diffusion population model without self-diffusion
608
Analysis of a parallel double glass solar still with separate condenser
609
Analysis of a parallel volume rendering system based on the shear-warp factorization
610
Analysis of a passive vapor feed direct methanol fuel cell
611
Analysis of a PEMFC durability test under low humidity conditions and stack behaviour modelling using experimental design techniques
612
Analysis of a peptide hormone mixture of therapeutic interest by liquid chromatography coupled to high-flow pneumatically assisted electrospray mass spectrometry
613
Analysis of a perforated panel for the correction of low frequency resonances in medium size rooms
614
Analysis of a periodic bacteria-immunity model with delayed quorum sensing
615
Analysis of a permeable interface crack in elastic dielectric/piezoelectric bimaterials
616
Analysis of a phosphorylcholine-based polymer coating on a coronary stent pre- and post-implantation
617
Analysis of a photochemical water splitting reactor with supramolecular catalysts and a proton exchange membrane
618
Analysis of a Piezo Electric Driver Circuit for Use in a Fabry-Perot Interferometer
619
Analysis of a piezoelectric finite wedge under antiplane concentrated loads
620
Analysis of a piezoelectric finite wedge under antiplane concentrated loads
621
ANALYSIS OF A PIEZOELECTRIC MULTIMORPH IN EXTENSIONAL AND FLEXURAL MOTIONS
622
Analysis of a piezoelectric screw dislocation in the interphase layer between a circular inclusion and an unbounded matrix
623
Analysis of a piwi-Related Gene Implicates Small RNAs in Genome Rearrangement in Tetrahymena
624
Analysis of a platform for thermal management studies of microelectronics cooling methods
625
Analysis of a polyphase synchronous reluctance motor with two identical stator windings
626
Analysis of a Population Model with Space-dependent Recruitment in Continuous Time
627
Analysis of a possible future degradation in the DORIS geodetic results related to changes in the satellite constellation Original Research Article
628
Analysis of a possible root cause and mechanism for Soma mine disaster
629
Analysis of a power oscillation damping scheme using a voltage-source inverter
630
Analysis of a precision agriculture approach to cotton production
631
Analysis of a preconditioned GMRES solver for a nonsymmetric SUPG discretization of the compressible Navier-Stokes equations
632
Analysis of a predator–prey model with Holling II functional response concerning impulsive control strategy
633
Analysis of a predator–prey model with modified Holling–Tanner functional response and time delay
634
Analysis of a predator–prey model with modified Leslie–Gower and Holling-type II schemes with stochastic perturbation
635
Analysis of a predator–prey model with modified Leslie–Gower and Holling-type II schemes with time delay
636
Analysis of a preferential action of α-amylase from B. licheniformis towards amorphous regions of waxy maize starch
637
Analysis of a Preimplantation Genetic Test for Aneuploidies in Embryos from Colombian Couples: A Report of Cases
638
Analysis of a pressure disturbance in a homogeneous magnetic field Original Research Article
639
Analysis of a pressurized solid oxide fuel cell–gas turbine hybrid power system with cathode gas recirculation
640
Analysis of a probabilistic model of redundancy in unsupervised information extraction Original Research Article
641
Analysis of a process for curing composites by the use of embedded resistive heating elements
642
Analysis of a production/inventory system with randomly failing production unit submitted to regular preventive maintenance
643
Analysis of a production–inventory system with machine breakdowns and shutdowns
644
Analysis of a propagating crack in functionally graded materials with property variation angled to crack direction
645
Analysis of a Proper Strategy for Solar Energy Deployment in Iran using SWOT Matrix
646
Analysis of a pulsating fatigue process on carbon steel with different carbide shapes
647
Analysis of a PWR core baffle considering irradiation induced creep
648
Analysis of a quadratic algorithm for the angular-resolved XPS method for depth profiling
649
Analysis of a quasistatic contact problem for piezoelectric materials
650
Analysis of a quasistatic displacement-traction problem for viscoelastic materials
651
Analysis of a queueing system with a general service scheduling function, with applications to telecommunication network traffic control
652
Analysis of a racetrack microring resonator with MMI coupler
653
Analysis of a radiation attribute from uranium in storage
654
Analysis of a radiation attribute from uranium in storage
655
Analysis of a rainwater collection system for domestic water supply in Ringdansen, Norrköping, Sweden
656
Analysis of a random-access protocol under long-range-dependent traffic
657
Analysis of a randomized rendezvous algorithm
658
Analysis of a rapid supercritical extraction aerogel fabrication process: Prediction of thermodynamic conditions during processing
659
Analysis of a rate-dependent cohesive model for dynamic crack propagation
660
Analysis of a reactive extraction process for biodiesel production using a lipase immobilized on magnetic nanostructures
661
Analysis of a Reduced Model of Cortiocotroph Action Potentials
662
Analysis of a refrigeration cycle driven by refrigerant steam turbine
663
Analysis of a reheat gas turbine cycle with chemical recuperation using Aspen
664
Analysis of a remarkable perpendicular band in KrH2O with origin close to the ν1 + ν3 R(0) line in H2O
665
Analysis of a renormalization group method and normal form theory for perturbed ordinary differential equations
666
Analysis of a repowering proposal to the power generation system of a steel mill plant through the exergetic cost method
667
Analysis of a reputation system for Mobile Ad-Hoc Networks with liars
668
Analysis of a retrial queuing model with MAP arrivals and two types of customers
669
Analysis of a retrogressive landslide in glaciolacustrine varved clay
670
Analysis of a rigid footing lying on three-layered soil using the finite difference method
671
Analysis of a rotation-free 4-node shell element
672
Analysis of a rubber cone tensioned by a concentrated force
673
Analysis of a rule-based curriculum plan optimization system with Spearman rank correlation
674
Analysis of a safety barrier connection joint post-testing
675
Analysis of a salinity induced BjSOS3 protein from Brassica indicate it to be structurally and functionally related to its ortholog from Arabidopsis
676
Analysis of a sandwich-type generator with self-heating thermoelectric elements
677
Analysis of a Scale-Similarity Model of the Motion of Large Eddies in Turbulent Flows1
678
Analysis of a Schnute postulate-based unified growth model for model selection in evolutionary computations
679
Analysis of a screw dislocation inside an elliptical inhomogeneity in piezoelectric solids
680
Analysis of a screw dislocation inside an inhomogeneity with interface stress
681
Analysis of a Second-Order Sliding-Mode Algorithm in Presence of Input Delays .
682
Analysis of a Secreted Aspartic Peptidase Disruption Mutant of Glomerella cingulata
683
Analysis of a self -switched mode-locking -cut Nd : GdV O4 /KTP green laser
684
Analysis of a semidiscrete discontinuous Galerkin scheme for compressible miscible displacement problem
685
Analysis of a sequence of energetic ion and magnetic field events upstream from the Saturnian magnetosphere
686
Analysis of a severe pollution episode in Valencia (Spain) and its effect on ground level particulate matter
687
Analysis of a severe prolonged regional haze episode in the Yangtze River Delta, China
688
Analysis of a shared-memory multiprocessor via a novel queuing model
689
Analysis of a shared-memory multiprocessor via a novel queuing model
690
Analysis of a shield design for a DT neutron generator test facility
691
Analysis of a short-circuit ring impact problem and design of a new ventilator for a 625 kVA generator, using SVL Original Research Article
692
Analysis of a shrink-fit failure on a gear hub/shaft assembly
693
Analysis of a signal during bistable flow events in Laguna Verde Nuclear Power Station with wavelets techniques Original Research Article
694
Analysis of a Signorini problem with friction
695
Analysis of a single cover FRP flat plate collector for treating tannery effluent
696
Analysis of a single nucleotide polymorphism in codon 388 of the FGFR4 gene in malignant gliomas
697
Analysis of a Single Server Queue with Working Vacation and Vacation Interruption
698
Analysis of a single-effect mechanical vapor compression desalination system using water injected twin screw compressors Original Research Article
699
Analysis of a single-server retrial queue with quasi-random input and nonpreemptive priority
700
Analysis of a single-stage, single-product, stochastic, MRP-controlled assembly system
701
Analysis of a SIS epidemic model with stage structure and a delay
702
Analysis of a small wind-hydrogen stand-alone hybrid energy system
703
Analysis of a SOFC energy generation system fuelled with biomass reformate
704
Analysis of a soft-switched PFC boost converter using analog and digital control circuits
705
Analysis of a solar assisted heat pump system for indoor swimming pool water and space heating
706
Analysis of a solar desalination unit with humidification–dehumidification cycle using DoE method Original Research Article
707
Analysis of a solar dish–Stirling system with hybridization and thermal storage
708
Analysis of a solar-powered membrane distillation system Original Research Article
709
Analysis of a solid avascular tumor growth model with time delays in proliferation process
710
Analysis of a solid state wave gyroscope with thin shell cylindrical resonator and calculation of its conversion factor
711
Analysis of a solute polarity parameter in reversed-phase liquid chromatography on a linear solvation relationship basis
712
Analysis of a solute polarity parameter in reversed-phase liquid chromatography on a linear solvation relationship basis Original Research Article
713
Analysis of a Spanish energy scenario with Generation IV nuclear reactors
714
Analysis of a spatially extended nonlinear SEIS epidemic model with distinct incidence for exposed and infectives
715
Analysis of a splitting method for incompressible inviscid rotational flow problems
716
Analysis of a stabilized finite element approximation of the Oseen equations using orthogonal subscales Original Research Article
717
Analysis of a stabilized finite element method for fluid flows through a porous interface
718
Analysis of a stable halogenated derivative of muramic acid by gas chromatography–negative ion chemical ionization tandem mass spectrometry
719
Analysis of a stand-alone permanent-magnet synchronous generator using a time-stepping coupled field-circuit method
720
Analysis of a static pricing scheme for priority services
721
Analysis of a static transfer switch with respect to transfer time
722
Analysis of a station-keeping maneuver strategy for collocation of three geostationary satellites
723
Analysis of a stochastic autonomous mutualism model
724
Analysis of a stochastic backscatter model for the large-eddy simulation of wall-bounded flow
725
Analysis of a stochastic food chain model with finite delay
726
Analysis of a stochastic neuronal model with excitatory inputs and state-dependent effects
727
Analysis of a stochastic SIR epidemic on a random network incorporating household structure
728
Analysis of a storage ring combined-function magnet: trajectory calculation and alignment procedure
729
Analysis of a storage ring combined-function magnet: trajectory calculation and alignment procedure
730
Analysis of a structural-aerodynamic fully-coupled formulation for aeroelastic response of rotorcraft
731
Analysis of a subinterface crack in piezoelectric bimaterials with the extended finite element method
732
Analysis of a survey of 36 French research committees on intracytoplasmic sperm injection
733
Analysis of a swimmerʹs hand and arm in steady flow conditions using computational fluid dynamics
734
Analysis of a symbiotic thermoelectric system for power generation and liquid preheating
735
Analysis of a symplectic difference scheme for a coupled nonlinear Schrِdinger system
736
Analysis of a synchronization station for the performance evaluation of a kanban system with a general arrival process of demands
737
Analysis of a synchronous reluctance machine with an auxiliary single-phase winding
738
Analysis of a system for remote, dry removal of solidified mixed waste
739
Analysis of a system of fractional differential equations
740
Analysis of a system of nonautonomous fractional differential equations involving Caputo derivatives
741
Analysis of a TB model with treatment interruptions
742
Analysis of a Teaching Approach Aiming at Eliminating Student Difficulties with Radian
743
Analysis of a technical-grade w/o-microemulsion and its application for the precipitation of calcium carbonate nanoparticles
744
Analysis of a temperature-dependent model for adhesive contact with friction
745
Analysis of a Thaumasia Planum rift through automatic mapping and strain characterization of normal faults
746
Analysis of a Theoretical Model Based on Similarity for Studying RNA Base Pairings
747
Analysis of a thermal energy storage system for air cooling–heating application through cylindrical tube
748
Analysis of a thermal scene using computer simulations
749
Analysis of a thermophilic lignocellulose degrading microbial consortium and multi-species lignocellulolytic enzyme system
750
Analysis of a thermoviscoelastic model in large strain
751
Analysis of a third-order absorbing boundary condition for the Schrödinger equation discretized in space Original Research Article
752
Analysis of a Three Age Group Preys with Control Measures of COVID-19 Spread in the Third Prey
753
Analysis of a Three Species Eco-Epidemiological Model1
754
Analysis of a tilting pad journal bearing to avoid pad fluttering
755
Analysis of a time-dependent scheduling problem by signatures of deterioration rate sequences Original Research Article
756
Analysis of a time-domain finite element method for 3-D Maxwell’s equations in dispersive media Original Research Article
757
Analysis of a time-limited polling system
758
Analysis of a toluene stripping process: a comparison between a microfabricated stripping column and a conventional packed tower
759
Analysis of a topology control paradigm in WLAN/WPAN environments
760
Analysis of a topside ionospheric model using GPS and ionosonde observables Original Research Article
761
Analysis of a torque equilibrium model and the optimal strip working sequence for a shearing-cut and bending progressive die
762
Analysis of a tragic accident on a summer toboggan run
763
Analysis of a transient heat transfer experiment in a two pass internal coolant passage
764
Analysis of a transversely isotropic rod containing a single cylindrical inclusion with axisymmetric eigenstrains
765
Analysis of a two-alternative force-choice signal detection theory model
766
Analysis of a two-component hydrograph separation model to predict herbicide runoff in drained soils
767
Analysis of a two-dimensional invariant line interface for the case of a general transformation strain and application to thin-film interfaces Original Research Article
768
Analysis of a two-layered network by means of the power-series algorithm
769
Analysis of a two-level software rejuvenation policy
770
Analysis of a two-phase field model for the solidification of an alloy
771
Analysis of a two-phase queueing system with a fixed-size batch policy
772
Analysis of a two-port flanged coaxial holder for shielding effectiveness and dielectric measurements of thin films and thin materials
773
Analysis of a two-relay system configuration with application to Coulomb friction identification
774
Analysis of a two-stage finite buffer flow controlled queueing model by a compensation method
775
Analysis of a two-stage membrane reactor integrated with porous membrane having Knudsen diffusion characteristics for the thermal decomposition of hydrogen sulfide
776
Analysis of a two-stage telecommunication supply chain with technology dependent demand
777
Analysis of a Two-Storage System for Advance Payment Policies with the Partial Backlogged Shortage
778
Analysis of a type of nonsmooth dynamical systems
779
Analysis of a typical railway turnout sleeper system using grillage beam analogy
780
Analysis of A Uniform Bernoulli – Euler Beam on Winkler Foundation Subjected to Harmonic moving load
781
Analysis of a unit hydrograph model based on watershed geomorphology represented as a cascade of reservoirs
782
Analysis of a Urinary Biomarker Hydroxyproline for Clinical Assessment in Osteoporosis Patients
783
Analysis of a variable speed vapor compression system using artificial neural networks
784
Analysis of a variable time-step discretization for the Penrose–Fife phase relaxation problem Original Research Article
785
Analysis of a variational multiscale method for Large–Eddy simulation and its application to homogeneous isotropic turbulence
786
Analysis of a vehicle crankshaft failure
787
Analysis of a vehicle wheel shaft failure
788
Analysis of a velocity–pressure–pseudostress formulation for the stationary Stokes equations
789
Analysis of a versatile batch-service queueing model with correlation in the arrival process
790
Analysis of a versatile multi-class delay-loss system with a superimposed Markovian arrival process
791
Analysis of a viral infection model with immune impairment and cure rate
792
Analysis of a viscoelastic contact problem with multivalued normal compliance and unilateral constraint
793
Analysis of a viscoelastic spring–mass model
794
Analysis of a weakly non-linear autonomous oscillator by means of the field method
795
Analysis of a wedge impression test for measuring the interface toughness between films/coatings and ductile substrates Original Research Article
796
Analysis of a weld failure of a rolled Zn-alloy strip – A case study
797
ANALYSIS OF A WIDE SPECTRAL RANGE PLASMONIC OUTLINE BOWTIE ANTENNA RANGING IN 0.3-5.0 μm
798
Analysis of a wind farmʹs revenue in the British and Spanish markets
799
Analysis of a wire–duct electrostatic precipitator under dust loading conditions
800
Analysis of a wooden pellet-fueled domestic thermoelectric cogeneration system
801
Analysis of a yearly multi-round, multi-period, multi-product transmission rights auction
802
Analysis of abamectin residues in avocados by high-performance liquid chromatography with fluorescence detection
803
Analysis of abietic acid and dehydroabietic acid in food samples by in-tube solid-phase microextraction coupled with liquid chromatography–mass spectrometry
804
Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel
805
Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel
806
Analysis of abnormal grain growth of oriented LiCoO2 prepared by slip casting in a strong magnetic field
807
Analysis of Abnormal Modes of Hoisting DC Electric Drive System
808
Analysis of abnormal operation procedures in sequences of loss of the RHRS at midloop operation
809
Analysis of abnormal phenomena caused by synchronous rectifiers in a paralleled converter system
810
Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
811
Analysis of abrasive wear performance of arc welded hard layers
812
Analysis of absorbed dose distribution in head phantom in boron neutron capture therapy
813
Analysis of absorbed dose distribution in head phantom in boron neutron capture therapy
814
Analysis of Absorber and Buffer Layer Band Gap Grading on CIGS Thin Film Solar Cell Performance Using SCAPS
815
Analysis of absorption and reflection mechanisms in a three-dimensional plate silencer
816
Analysis of absorption spectra of purple bacterial reaction centers in the near infrared region by higher order derivative spectroscopy Original Research Article
817
Analysis of AC electrical properties of (Li and Ti)-doped NiO
818
Analysis of AC electrical properties of nanocrystalline nickel oxide
819
Analysis of AC electrical properties of nanocrystalline nickel oxide
820
Analysis of AC loss in superconducting power devices calculated from short sample data
821
Analysis of academic research performance from publications in the field of Computer Science
822
Analysis of accelerated gossip algorithms
823
Analysis of acceleration strategies for restarted minimal residual methods
824
Analysis of Accident Data and Evaluation of Leading Causes forTraffic Accidents in Jordan
825
Analysis of accident inequality of the Spanish fishing fleet
826
Analysis of Accidents in Nine Iranian Gas Refineries: 2007–2011
827
Analysis of accidents leading to local flow stagnation in parallel fuel channels of RBMK-type reactors
828
Analysis of accounting models for the detection of duplicate requests in web services
829
Analysis of Accumulation Patterns of Barley yellow dwarf virus-PAV (BYDV-PAV) in Two Resistant Wheat Lines
830
Analysis of accumulation, extractability, and metabolization of five different phenylarsenic compounds in plants by ion chromatography with mass spectrometric detection and by atomic emission spectroscopy Original Research Article
831
Analysis of accuracy of a finite volume scheme for diffusion equations on distorted meshes
832
Analysis of Accuracy of Interpolation Methods in Estimating the Output Factors for Square Fields in Medical Linear Accelerator
833
Analysis of acetylcholine from extracellular fluid in brain by in vivo microdialysis and LC–ESI-MS/MS with the stable isotope-labeled internal standard
834
Analysis of acetylene in blood and urine using cryogenic gas chromatography–mass spectrometry
835
Analysis of acid rain patterns in northeastern China using a decision tree method
836
Analysis of acid returns improves efficiency of acid stimulation: a case history
837
Analysis of acid-catalyzed dehydration of formic acid in hot compressed water based on density functional theory
838
Analysis of acidic carbohydrates as their quaternary ammonium or phosphonium salts by matrix-assisted laser desorption/ionization mass spectrometry Original Research Article
839
Analysis of acidic drugs in the effluents of sewage treatment plants using liquid chromatography–electrospray ionization tandem mass spectrometry
840
Analysis of acidic pesticides using in situ derivatization with alkylchloroformate and solid-phase microextraction (SPME) for GC–MS
841
Analysis of acidic sites in Nafion-H and Nafion-H/silica gel nanocomposites by laser-induced fluorescence spectra of quinoline adsorbed on the surface
842
Analysis of acidity production during enhanced reductive dechlorination using a simplified reactive transport model
843
Analysis of acoustic channels with a time-evolving sinusoidal surface
844
Analysis of acoustic characteristics according to design parameter of diaphragm
845
Analysis of Acoustic Emission energy release during static fatigue tests at intermediate temperatures on Ceramic Matrix Composites: Towards rupture time prediction
846
Analysis of Acoustic Emission Signals in Machining
847
Analysis of Acoustic Emission Signals in Machining
848
Analysis of acoustic emission signature during aluminous cement setting to characterise the mechanical behaviour of the hard material
849
Analysis of acoustic networks including cavities by means of a linear finite volume method
850
Analysis of acoustic noise in MRI
851
Analysis of Acoustic Surface Waveguide for AE Monitoring of Concrete Beams
852
Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates
853
Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates
854
Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates
855
Analysis of acquisition patterns: A theoretical and empirical evaluation of alternative methods
856
Analysis of acrylamide in coffee and dietary exposure to acrylamide from coffee
857
Analysis of acrylamide in coffee and dietary exposure to acrylamide from coffee Original Research Article
858
Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry
859
Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry Original Research Article
860
Analysis of acrylamide in food by isotope-dilution liquid chromatography coupled with electrospray ionization tandem mass spectrometry
861
Analysis of acrylamide in food products by in-line preconcentration capillary zone electrophoresis
862
Analysis of acrylamide in food samples by capillary zone electrophoresis
863
Analysis of actinomycin D treated cattle oocytes and their use for somatic cell nuclear transfer
864
Analysis of activated slip systems in fatigue nickel polycrystals using the EBSD-technique in the scanning electron microscope
865
Analysis of activated slip systems in fatigue nickel polycrystals using the EBSD-technique in the scanning electron microscope
866
Analysis of activated sludge process using multivariate statistical tools—a PCA approach
867
Analysis of activation in anterior cingulate cortex during cognitive process of selection following somatosensory stimuli: fMRI study with elaborate task paradigms
868
Analysis of active and passive magnetic field reduction systems (MFRS) of the ITER NBI
869
Analysis of Active and Reactive Power Control of a Stand-Alone PEM Fuel Cell Power Plant.
870
Analysis of active chemical species generated by electrolysis using non-aqueous capillary electrophoresis: Detection of the anion radical and the divalent anion of tetracyanoquinodimethane
871
Analysis of active damping in composite laminate cylindrical shells of revolution with skewed PVDF sensors/actuators
872
Analysis of active filter behaviour by means of modified z-transform method
873
Analysis of active islanding detection methods for grid-connected microinverters for renewable energy processing
874
Analysis of active pixel sensor readout circuit
875
Analysis of Active Queue Management Algorithms & Their Implementation for TCP/IP Networks Using OPNET Simulation Tool
876
Analysis of Active SFCL by Design of Control Strategies for Fault Detection and PWM Converter and Protection Coordination with Distance Relay
877
Analysis of active sites and heterogeneity in commercial reversed-phase octadecylsilanated silica with numerically calculated sorption distributions
878
Analysis of activity duration using the Puget sound transportation panel
879
Analysis of actuator delay compensation methods for real-time testing
880
Analysis of acute coronary ischemia–time insensitive predictive instrument (ACI-TIPI) as a clinical prediction rule in emergency department chest pain protocol patients undergoing stress testing
881
Analysis of adaptation in anteroposterior dynamics of human postural control
882
Analysis of adaptive cost functions for dynamic update policies for QoS routing in hierarchical networks
883
Analysis of adaptive detection of moderately fluctuating radar targets in target multiplicity environments
884
Analysis of adaptive filters using normalized signed regressor LMS algorithm
885
Analysis of adaptive GBN schemes in a Gilbert–Elliott channel and optimisation of system parameters
886
Analysis of adaptive plate structures by mixed layerwise finite elements
887
Analysis of adaptive shell structures using a refined laminated model
888
Analysis of adaptive-network-based fuzzy inference system (ANFIS) to estimate buoyancy-induced flow field in partially heated triangular enclosures
889
Analysis of added mass in cavitating flow
890
Analysis of additives in dairy products by liquid chromatography coupled to quadrupole-orbitrap mass spectrometry
891
Analysis of adenosine phosphates in HepG-2 cell by a HPLC–ESI-MS system with porous graphitic carbon as stationary phase
892
Analysis of adenovirus gene transfer into adult neural stem cells
893
Analysis of ADEOS/POLDER data over land surfaces Original Research Article
894
Analysis of Adequacy of 25-Hydroxi vitamin D3 Supplementation in Patients on Hemodialysis and Parathormone, Calcium and Phosphorus Level in the Blood of These Patients
895
Analysis of adhering organic residues of two “coupes-à-socles” from the Neolithic funerary site “La Hougue Bie” in Jersey: evidences of birch bark tar utilisation
896
Analysis of adhesion behavior of waste combustion ash at high temperatures and its control by the addition of coarse particles
897
Analysis of adhesion under wet conditions for three-dimensional contact considering surface roughness
898
Analysis of adhesive behaviour of human skin in vivo by an indentation test
899
Analysis of adhesive bonded joints: a unified approach
900
Analysis of adhesive joints in corrugated board under shear loading
901
Analysis of adhesive joints used to bond FRP laminates to steel members – A numerical and experimental study
902
Analysis of adhesive properties of B2 hardmetal surface
903
Analysis of adhesive-bonded single-lap joint with an interfacial crack and a void
904
Analysis of adhesively bonded joints with gaps subjected to bending
905
Analysis of adhesively bonded joints: a finite element method and a material model with damage
906
Analysis of adhesively bonded repairs in composites: Damage detection and prognosis
907
Analysis of adiabatic heating and its influence on the Garofalo equation parameters of a high nitrogen steel
908
Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
909
Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
910
Analysis of adiabatic shear bands in elasto-thermo-viscoplastic materials by modified smoothed-particle hydrodynamics (MSPH) method
911
Analysis of adjacent-band interference between Earth stations and Earth-orbiting satellites
912
Analysis of adjuvant effects and their interactions with variable application parameters
913
Analysis of Adomian decomposition applied to a third-order ordinary differential equation from thin film flow Original Research Article
914
Analysis of adopting an integrated decision making trial and evaluation laboratory on a technology acceptance model
915
Analysis of adsorbed proteins by static time-of-flight secondary ion mass spectrometry
916
Analysis of adsorpti n of azo dye onto NiAl-CO₃ using Box-Behnken design approach and desirability function
917
Analysis of adsorption equilibrium of hydrogen on graphene sheets
918
Analysis of adsorption of phospholipids at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy: A study of the effect of the saturated alkyl chain
919
Analysis of adsorption of reactive azo dye onto CuCl2 doped polyaniline using Box–Behnken design approach
920
Analysis of adsorption properties of N719 dye molecules on nanoporous TiO2 surface for dye-sensitized solar cell
921
Analysis of advanced gas foil bearings with piecewise linear elastic supports
922
Analysis of advanced glycation endproducts in dairy products by isotope dilution liquid chromatography–electrospray tandem mass spectrometry. The particular case of carboxymethyllysine
923
Analysis of adverse drug reactions using drug and drug target interactions and graph-based methods
924
Analysis of adverse events in titration studies
925
ANALYSIS OF ADVERSE EVENTS REPORTED FOLLOWING SINGLE DOSE MONOVALENT H1N1 (SWINE FLU) VACCINE
926
Analysis of Adverse Reactions of Blood Transfusion and Discus-sion of Influencing Factors in Linyi Area from 2013 To 2020
927
Analysis of advertising lifetime for mobile phone
928
Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology
929
Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology
930
Analysis of AERODEVAP experiments with the SOPHAEROS computer code
931
Analysis of aerosol characteristics and their relationships with meteorological parameters over Anhui province in China
932
Analysis of aerosol composition at Cheju Island, Korea, using a two-bin gas-aerosol equilibrium model
933
Analysis of aerosol dependence on meteorological parameters. Field campaign at vindeby on lolland
934
Analysis of aerosol deposition in PHEBUS containment during FPT-1 experiment Original Research Article
935
Analysis of aerosol measurements from the Vindeby Experiment
936
Analysis of aerosol transport to Tahoe basina
937
Analysis of aesculin and aesculotin in Cortex fraxini by capillary zone electrophoresis
938
Analysis of AET and yield predictions under surface and buried drip irrigation systems using the Crop Model PILOTE and Hydrus-2D
939
Analysis of Aflatoxin B1 in Iranian Foods Using HPLC and a Monolithic Column and Estimation of its Dietary Intake
940
Analysis of aflatoxin M1 and M2 in commercial dairy products using high-performance liquid chromatography with a fluorescence detector
941
Analysis of aflatoxin M1 in milk and yogurt and AFM1 reduction by lactic acid bacteria used in Lebanese industry
942
Analysis of aflatoxins in herbal medicine and health functional foods
943
Analysis of aftershock sequences in South and Southeastern Spain
944
Analysis of agaritine in mushrooms and in agaritine-administered mice using liquid chromatography–tandem mass spectrometry
945
Analysis of age differences in types of errors on the Ravenʹs Advanced Progressive Matrices
946
Analysis of age of onset of accessory pathway-mediated tachycardia in men and women
947
Analysis of Age, Gender, and Refractive Error‑Related Changes of the Anterior Corneal Surface Parameters Using Oculus Keratograph Topography
948
Analysis of aged gelatin by AFlFFF-MALS: Identification of high molar mass components and their influence on solubility
949
Analysis of Aged Oil on the Cooling of Power Transformers from Computational Fluid Dynamics and Experimental Measurements
950
Analysis of aged red wine pigments by capillary zone electrophoresis
951
Analysis of age-related changes in the functional morphologies of salivary glands in mice
952
Analysis of agglomerate dispersion mechanisms of multiwalled carbon nanotubes during melt mixing in polycarbonate
953
Analysis of aggregates of human immunoglobulin G using size-exclusion chromatography, static and dynamic light scattering
954
Analysis of aggregation and dispersion states of small particles in concentrated suspension by using diffused photon density wave spectroscopy
955
Analysis of aggregation errors for the p-median problem
956
Analysis of aggregative behavior of Pseudomonas sp. 30-3 isolated from Antarctic soil
957
Analysis of aggregative behavior of Pseudomonas sp. 30-3 isolated from Antarctic soil
958
Analysis of agreement between dobutamine stress echocardiography and exercise nuclear angiography in severe aortic regurgitation
959
Analysis of Agricultural Credit and Constraints: Experience of Paksistan
960
Analysis of Agricultural Explanation Centers in the Implementation of the Agricultural Development Strategy Command Program (Konstratani)
961
ANALYSIS OF AGRICULTURAL EXTENSION SYSTEM: A DISCREPANCY BETWEEN PROVIDERS AND RECIPIENTS OF THE EXTENSION SERVICES EMPIRICAL EVIDENCE FROM NORTH-WEST PAKISTAN
962
Analysis of agricultural production instability in the Gezira scheme
963
Analysis of Agricultural Student’s Rural Entrepreneurial Intentions Based on the Extended Theory of Planned Behavior
964
Analysis of Agriculture Credit Contribution in Cotton Production of Southern Punjab, Pakistan
965
Analysis of agro industries dissolution: The case of Fars Industrial Meat Complex in Iran
966
Analysis of Agro-Chemical Inputs Use in Maize Production among Small-Scale Farmers in Iwo Local Government, Osun State, Nigeria
967
Analysis of agrochemicals by capillary electrophoresis
968
ANALYSIS OF AGROMORPHOLOGICAL DESCRIPTORS TO DIFFERENTIATE BETWEEN DUKE CHERRY (Prunus x gondouinii (Poit. & Turpin) Rehd.) AND ITS PROGENITORS: SWEET CHERRY (Prunus avium L.) AND SOUR CHERRY (Prunus cerasus L.)
969
Analysis of Ah receptor pathway activation by brominated flame retardants
970
Analysis of Ahmadinejad Government's Foreign Policy According to the Critical Theory of International Relations
971
Analysis of AIMD protocols over paths with variable delay
972
Analysis of air contrast barium enema, computed tomographic colonography, and colonoscopy: prospective comparison
973
Analysis of air injection system for drag reduction in high speed vessels using numerical simulation software ANSYS-Fluid Flow
974
Analysis of air particulates by radio isotopic X-ray fluorescence technique
975
Analysis of Air Pollutants in Surrounding of Korba District
976
Analysis of air pollution data at a mixed source location using boosted regression trees
977
Analysis of air pollution in two major Korean cities: trends, seasonal Tvariations, daily 1-hour maximum versus other hour-based concentrations, and Tstandard exceedances
978
Analysis of air quality data near roadways using a dispersion model
979
Analysis of air quality within a street canyon using statistical and dispersion modelling techniques
980
Analysis of air return alternatives for CRS-type open volumetric reciever
981
Analysis of airborne magnetic and gravity anomalies of peninsular shield, India integrated with seismic and magnetotelluric results and gravity anomalies of Madagascar, Sri Lanka and East Antarctica
982
Analysis of airborne radon in an ultra-low background experiment
983
Analysis of airborne sound insulation and impact sound pressure level provided by a single partition containing a heterogeneity
984
Analysis of airborne yeast in one winery over a period of one year
985
Analysis of airflow on an airfoil using electro-hydrodynamic actuators
986
Analysis of airflow over building arrays for assessment of urban wind environment
987
Analysis of airflow through experimental rural buildings: Sensitivity to turbulence models
988
Analysis of air-inflated, heavy, membrane tube supported at two points on an incline
989
Analysis of Al2O3 Nanostructure Using Scanning Microscopy
990
Analysis of alcohol polyethoxylates and polyethylene glycols in marine sediments
991
Analysis of aldehydes in beer by gas-diffusion microextraction: Characterization by high-performance liquid chromatography–diode-array detection–atmospheric pressure chemical ionization–mass spectrometry
992
Analysis of aldehydes in excipients used in liquid/semi-solid formulations by gas chromatography–negative chemical ionization mass spectrometry
993
Analysis of aldehydes in water by solid-phase microextraction with on-fiber derivatization
994
Analysis of aliphatic alcohol ethoxylates in terms of alkyl and ethylene oxide chain lengths by reversed-phase liquid chromatography with evaporative light scattering detection
995
Analysis of aliphatic biopolymers using thermochemolysis with tetramethylammonium hydroxide (TMAH) and gas chromatography–mass spectrometry
996
Analysis of alkali-lignin in a paper mill effluent decolourised with two Streptomyces strains by gas chromatography–mass spectrometry after cupric oxide degradation
997
Analysis of alkali-silicate glasses by electron probe analysis
998
Analysis of alkaloids in Coptis chinensis Franch by accelerated solvent extraction combined with ultra performance liquid chromatographic analysis with photodiode array and tandem mass spectrometry detections Original Research Article
999
Analysis of alkaloids in Lotus (Nelumbo nucifera Gaertn.) leaves by non-aqueous capillary electrophoresis using ultraviolet and mass spectrometric detection
1000
Analysis of alkaloids in Macleaya cordata (Willd.) R. Br. using high-performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry
