<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Application of polymeric solvent resistant nanofiltration membranes for biodiesel production
2
Application of polymeric water absorbent film to the study of drop size-resolved fog samples
3
Application of polymer-modified nanoporous silica to adsorbents of uranyl ions
4
Application of Polymers in Foods: H.N. Cheng, G.L. Cote, I.C. Baianu (Eds.); Wiley–VCH Verlag GmbH, D-69469 Weinham, Germany, 1999, 282 pages, ISBN 3-527-29808-8, £70.00
5
Application of polymer-supported triphenyl phosphine in the palladium-catalyzed cyanation reaction under microwave conditions
6
Application of polymethacrylate resin as stationary phase in liquid chromatography with UV detection for C1–C7 aliphatic monocarboxylic acids and C1–C7 aliphatic monoamines
7
Application of polynomial chaos in stability and control
8
Application of polynomial method to on-line list colouring of graphs
9
Application of polynomial models to predict growth of mixed cultures of Pseudomonas spp. and Listeria in meat
10
Application of polynomial projection ensembles to hedging crude oil commodity risk
11
APPLICATION OF POLYNUCLEAR AROMATIC HYDROCARBONS IN CHEMICAL FINGERPRINTING: THE NIGER DELTA CASE STUDY
12
APPLICATION OF POLYNUCLEAR AROMATIC HYDROCARBONS IN CHEMICAL FINGERPRINTING: THE NIGER DELTACASE STUDY
13
Application of polyol process to prepare AC-supported nanocatalyst for VOC oxidation Original Research Article
14
Application of polyoxometalate-based composites for sensor systems: A review
15
Application of polyphenylmethylsiloxane coated fiber for solid-phase microextraction combined with microwave-assisted extraction for the determination of organochlorine pesticides in Chinese teas
16
APPLICATION OF POLYPROPYLENE NONWOVEN FABRICS FOR CEMENT COMPOSITES REINFORCEMENT
17
Application of Polypyrrole Coated Stainless-Steel Wire to the Headspace Solid-Phase Microextraction of Aliphatic Amines
18
Application of polypyrrole/TiO2 composite films as corrosion protection of mild steel
19
Application of Polysaccharide-Based Materials in Food Packaging
20
Application of polysulfone (PSf)– and polyether ether ketone (PEEK)–tungstophosphoric acid (TPA) composite membranes for water electrolysis
21
Application of polysulfone/cyclodextrin mixed-matrix membranes in the removal of natural organic matter from water
22
Application of Polysystem Theory to English to Persian Translations of Rowling’s Harry Potter and the Chamber of Secrets
23
Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review
24
Application of polyurethane foam as a sorbent for trace metal pre-concentration — A review
25
Application of polyurethane foam loaded with BTAC in an on-line preconcentration system: cadmium determination by FAAS
26
Application of polyurethane foam units and calorimetry to microbial monitoring in Lake Donghu
27
Application of Polyvinyl Chloride- Halloysite Nanotubes/Uio66-NH2 Mixed Matrix Membranes in Separation of Sunflower Oil from Water
28
Application of Pontryaginʹs Minimal Principle to the energy management strategy of plugin fuel cell electric vehicles
29
Application of Pop Quiz Method in Teaching Biostatistics to Postgraduate Midwifery Students and Its Effect on Their Statistics Anxiety, Test Anxiety and Academic Achievement: A QuasiExperimental Study with Control Group
30
Application of population balance model to HPGR crushing
31
Application of population balances in the chemical industry -- current status and future needs
32
Application of pork fat diacylglycerols in meat emulsions
33
Application of porous anodic alumina monolith catalyst in steam reforming of dimethyl ether: Cu/γ-Al2O3/Al catalyst degradation behaviors and catalytic activity improvement by pre-competition impregnation method
34
Application of porous medium approach to simulate UCG process
35
Application of porous membrane protected micro-solid-phase-extraction combined with gas chromatography–mass spectrometry for the determination of estrogens in ovarian cyst fluid samples Original Research Article
36
Application of porphyrins in flow-injection analysis: A review
37
Application of portable protective gaps for live work on compact 550 kV transmission lines
38
Application of position sensitive detector for the electron detachment cross-sections measurement
39
Application of position sensitive detector for the electron detachment cross-sections measurement
40
Application of positive matrix factorization in source apportionment of particulate pollutants in Hong Kong
41
Application of positive matrix factorization, multi-linear engine and back trajectory techniques to the quantification of coal-fired power station pollution in metropolitan Sydney
42
Application of positron annihilation line-shape analysis to fatigue damage for nuclear plant materials Original Research Article
43
Application of positron annihilation spectroscopy on the ion implantation damaged Fe–Cr alloys
44
Application of Positron Annihilation Spectroscopy to Study the Relationship Between Microstructure and Metallurgical Property of a Commercial Pure Copper
45
Application of positron annihilation: Study of pervaporation dense membranes
46
Application of positron beam Doppler broadening technique to ion beam irradiation in nickel
47
Application of positron beams to the study of positronium-forming solids
48
Application of Postʹs formula to optical pulse propagation in dispersive media
49
Application of potassium chloride to a Chernobyl-contaminated lake: modelling the dynamics of radiocaesium in an aquatic ecosystem and decontamination of fish
50
Application of potassium tetrafluorobromate to the rapid decomposition and determination of noble metals in chromites and related materials
51
Application of Potential Field Method for Path Planning of Wheeled Mobile Robots
52
Application of potentiometric method using a cell without liquid junction to underway pH measurements in surface seawater
53
Application of potentiometric stripping analysis for speciation of copper complexes with adsorbable ligands on the mercury electrode
54
Application of potentiometric stripping analysis with constant inverse current for determining soluble lead in human teeth
55
Application of potentiometric stripping analysis with constant inverse current for determining soluble lead in human teeth Original Research Article
56
Application of potentiometry to characterize acid and basic sites in humic substances Testing the BEST7 program with a weak-acid mixture
57
Application of potentiometry to characterize acid and basic sites in humic substances: Testing the BEST7 program with a weak-acid mixture Original Research Article
58
Application of powder metallurgy and hot rolling processes for manufacturing aluminum/alumina composite strips
59
Application of power functions to chromatographic data for the enhancement of signal to noise ratios and separation resolution
60
Application of power plant flue gas in a photobioreactor to grow Spirulina algae, and a bioactivity analysis of the algal water-soluble polysaccharides
61
Application of power ultrasound in leather processing: an eco-friendly approach
62
Application of Power-Law Frequency Fractal Model for Recognition of Vertical Cu Distribution in Milloieh Porphyry Deposit, SE Iran
63
Application of p-phenylenediamine as an electrochemical substrate in peroxidase-mediated voltammetric enzyme immunoassay Original Research Article
64
Application of practical fuzzy arithmetic to fuzzy internal model control
65
Application of practical fuzzy arithmetic to fuzzy internal model control
66
Application of prebending effect to high strength Nb3 Sn strands
67
Application of precise 142Nd/144Nd analysis of small samples to inclusions in diamonds (Finsch, South Africa) and Hadean Zircons (Jack Hills, Western Australia)
68
Application of preconditioned block BiCGGR to the Wilson–Dirac equation with multiple right-hand sides in lattice QCD Original Research Article
69
Application of preconditioned GMRES to the numerical solution of the neutron transport equation
70
Application of preconditioned transpose-free quasi-minimal residual method for two-group reactor kinetics
71
Application of predator-prey optimization for task scheduling in cloud computing
72
Application of prediction models to performance of high paraffinic content oilfields: Case study Shen95 Block of Jinganbao Oilfield
73
Application of predictive equations of state in calculating natural gas phase envelopes and critical points
74
Application of predictive microbiology to estimate the number of Bacillus cereus in pasteurised milk at the point of consumption
75
Application of predictive modelling techniques in industry: From food design up to risk assessment
76
Application of Predictive Nursing Reduces Psychiatric Complications in ICU Patients after Neurosurgery
77
Application of Prefabricated Vertical Drain in Soil Improvement
78
Application of Preference Ranking Organization Method for Enrichment Evaluation method in energy planning regional level
79
Application of preference selection index method for decision making over the design stage of production system life cycle
80
Application of preference selection index method for decision making over the design stage of production system life cycle
81
Application of preparative high-speed counter-current chromatography for isolation and separation of schizandrin and gomisin A from Schisandra chinensis
82
Application of preparative high-speed counter-current chromatography for separation and purification of arctiin from Fructus Arctii
83
Application of preparative high-speed counter-current chromatography for separation and purification of lignans from Taraxacum mongolicum
84
Application of preparative high-speed counter-current chromatography for separation of chlorogenic acid from Flos Lonicerae
85
Application of preparative high-speed counter-current chromatography for separation of methyl gallate from Acer truncatum Bunge
86
Application of preparative high-speed counter-current chromatography for the separation of flavonoids from the leaves of Byrsonima crassa Niedenzu (IK)
87
Application of preparative high-speed counter-current chromatography/electrospray ionization mass spectrometry for a fast screening and fractionation of polyphenols
88
Application of preparative high-speed counter-current chromatography/preparative high-performance liquid chromatography mode in rapid separation of saponins
89
Application of pressure assisted electrokinetic injection technique in the measurements of DNA oligonucleotides and their adducts using capillary electrophoresis–mass spectrometry
90
Application of Pressure Nutsche Filtration and Drying Technology for Toxic Chemicals
91
Application of Pressure Nutsche Filtration and Drying Technology for Toxic Chemicals
92
Application of pressure-modulated differential scanning calorimetry to the determination of relaxation kinetics of multilamellar lipid vesicles Original Research Article
93
Application of Pressure-Volume (P-V) Fractal Models in Modeling Formation Pressure and Drilling Fluid Determination in an Oilfield of SW Iran
94
Application of pressurized fluid extraction technique in the gas chromatography–mass spectrometry determination of sterols from marine sediment samples
95
Application of pressurized fluid extraction to determine cadmium and zinc in plants Original Research Article
96
Application of pressurized liquid extraction followed by gas chromatography–mass spectrometry to determine 4-nonylphenols in sediments
97
Application of pressurized liquid extraction technology to pharmaceutical solid dosage form analysis
98
Application of primary haemocyte culture of Penaeus monodon in the assessment of cytotoxicity and genotoxicity of heavy metals and pesticides
99
Application of principal axes for registration of NMR image sequences
100
Application of principal component analysis and artificial neural networks to recognize the individual VOCs of methanol/2-propanol in a binary mixture by SAW multi-sensor array
101
Application of principal component analysis for the characterisation of a piezoelectric sensors array Original Research Article
102
Application of principal component analysis for the diagnosis of neutron overpower system oscillations in CANDU reactors
103
Application of principal component analysis for the estimation of source of heavy metal contamination in surface sediments from the Rybnik Reservoir
104
Application of principal component analysis in machine-part cell formation
105
Application of principal component analysis to detect outliers and spectral deviations in near-field surfaceenhanced Raman spectra
106
Application of principal component analysis to detect outliers and spectral deviations in near-field surface-enhanced Raman spectra Original Research Article
107
Application of principal component analysis to ECG signals for automated diagnosis of cardiac health
108
Application of principal component analysis to some earthquake related data in the Koyna region, India
109
Application of principal component analysis to the study of major cations and trace metals in fish from Tenerife (Canary Islands)
110
Application of principal component analysis to the thermal characterization of silanized nanoparticles obtained at supercritical carbon dioxide conditions Original Research Article
111
Application of principal component analysis to X-ray photoelectron spectroscopy — the role of noise in the spectra
112
Application of principal component analysis-based two-dimensional correlation spectroscopy to characterization of order–disorder transition of polystyrene-block-poly(n-pentyl methacrylate) copolymer
113
Application of principal component and hierarchical cluster analysis to classify fruits and vegetables commonly consumed in Ireland based on in vitro antioxidant activity
114
Application of principal component and hierarchical cluster analysis to classify fruits and vegetables commonly consumed in Ireland based on in vitro antioxidant activity
115
Application of Principal Component Proximity Transform and Geostatistics Methods for Volume Shale Distribution as Reservoir Characreristic Imaging in Seismic 3D
116
Application of principal components analysis to the study of salinization on the Castellon Plain (Spain)
117
Application of principles of event related open systems to business process reengineering
118
Application of Prins cyclization to the total synthesis of (+)-decytospolides A and B
119
Application of printed nanocrystalline diamond film for electron emission cathode
120
Application of prismatic constructions to gauge field theory
121
Application of Probabilistic Clustering Algorithms to Determine Mineralization Areas in Regional-Scale Exploration Studies
122
Application of probabilistic fracture mechanics to a dynamic loading situation using the example of a dynamic tension test for ceramics
123
Application of probabilistic networks for decision support in power system analysis
124
Application of probabilistic neural network for differential relaying of power transformer
125
Application of probabilistic neural network in the clinical diagnosis of cancers based on clinical chemistry data Original Research Article
126
Application of probabilistic neural networks in qualitative analysis of near infrared spectra: Determination of producing area and variety of loquats Original Research Article
127
Application of probability based multi: Objective optimization in the preparation of drug encapsulation with a designed experiment
128
Application of probability distribution to the sampling of cotton bollworms (Lepidoptera: Noctuidae) in Northern Cameroon
129
Application of probability-based multi-objective optimization in material engineering
130
Application of probe tensile method for quantitative characterisation of the stickiness of fluid foods Original Research Article
131
Application of probes having 2′-deoxyinosine for typing of single nucleotide polymorphisms (SNPs) using DNA microarray Original Research Article
132
Application of Probiotic (Bacillus subtilis) to Enhance Immunity, Antioxidation, Digestive Enzymes Activity and Hematological Profile of Shaoxing Duck
133
Application of problem based learning (PBL) in a course on financial accounting principles
134
Application of process decomposition in multi-stream plate fin heat exchangers design to use in heat recovery networks
135
Application of process mineralogy as a tool in sustainable processing
136
Application of Prochaskaʹs transtheoretical model of change to patients with eating disorders
137
Application of PRODAN fluorescent probe to measure surface hydrophobicity of proteins interacting with κ-carrageenan
138
Application of product differential semantics to quantify purchaser perceptions in housing assessment
139
Application of profiled ejector in chemical lasers
140
APPLICATION OF PROFIT AND LOSS SHARING MODES IN TRADE FINANCING FOR SMALL-SCALE BUSINESSES: AN ALTERNATIVE TO DEBT BASED FINANCING
141
Application of Program Packages EMTDC and Matlab in the Analysis of Impact of Neutral Point Operating Regime on the Magnitude of Touch Voltage
142
Application of program slicing in algorithmic debugging
143
Application of programmed-temperature split/splitless injection to the trace analysis of aliphatic hydrocarbons by gas chromatography
144
Application of progressive fracture analysis for predicting failure envelopes and stress–strain behaviors of composite laminates: a comparison with experimental results
145
Application of progressive freeze-concentration for desalination Original Research Article
146
Application of progressive nucleation mechanism for the citation behavior of individual papers of different authors
147
Application of projection pursuit learning to boundary detection and deblurring in images
148
Application of PROMETHEE method for green supplier selection: a comparative result based on preference functions
149
Application of PROMETHEE-GAIA method for non-traditional machining processes selection
150
Application of Proper Orthogonal Decomposition (POD) to inverse problems in saturated groundwater flow
151
Application of proper orthogonal decomposition to the discrete Euler equations
152
Application of properties of the right-hand sides of evolution equations to an investigation of nonlocal evolution problems Original Research Article
153
Application of propidium monoazide quantitative PCR for selective detection of live Escherichia coli O157:H7 in vegetables after inactivation by essential oils
154
Application of propidium monoazide-qPCR to evaluate the ultrasonic inactivation of Escherichia coli O157:H7 in fresh-cut vegetable wash water
155
Application of Propolis Ethanol Extract and Propolis Nanoemulsion in Treatment of Cutaneous Infection in Rabbit
156
Application of Protection Motivation Theory to the Study of the Factors Related to Skin Cancer Preventive Behaviors in Students
157
Application of Protection Motivation Theory to the Study of the Factors Related to Skin Cancer Preventive Behaviors in Students
158
Application of Protection Motivation Theory to the Study of the Factors Related to Skin Cancer Preventive Behaviors in Students
159
Application of protein-coupled liposomes to effective affinity screening from phage library
160
Application of Proteomic Profiling Based on 2D-DIGE for Classification of Compounds According to the Mechanism of Action Original Research Article
161
Application of proteomic technologies to discover and identify biomarkers for excessive alcohol consumption: A review
162
Application of Proteomic Tools in Food Quality and Safety
163
Application of proteomics for comparison of proteome of Neospora caninum and Toxoplasma gondii tachyzoites
164
Application of proteomics in cardiovascular medicine
165
Application of proteomics to understand the molecular mechanisms behind meat quality
166
Application of Proton Chemical Shift Imaging in Monitoring of Gamma Knife Radiosurgery on Brain Tumors
167
Application of PRSV2 equation of state and explicit pressure dependence of the Langmuir adsorption constant to study phase behavior of gas hydrates in the presence and absence of methanol
168
Application of PRSV2 equation of state to predict hydrate formation temperature in the presence of inhibitors
169
Application of pseudo-derivative-feedback algorithm in greenhouse air temperature control
170
Application of pseudo-fluid approximation to evaluation of flow velocity through gravel beds
171
Application of Psf–PPSS–TPA composite membrane in the all-vanadium redox flow battery
172
APPLICATION OF PSO FOR FUZZY LOAD FREQUENCY DESIGN WITH CONSIDERING SUPERCONDUCTING MAGNETIC ENERGY STORAGE
173
Application of PSO technique for GEP in restructured power systems
174
Application of PSO-artificial neural network and response surface methodology for removal of methylene blue using silver nanoparticles from water samples
175
APPLICATION OF PSO-TVAC TO IMPROVE LOW FREQUENCY OSCILLATIONS
176
Application of PSP in low speed flows
177
Application of Psychology Theory in Multimedia Courseware
178
Application of Pt + RuO2 catalysts prepared by thermal decomposition of polymeric precursors to DMFC
179
Application of Pt sputter-deposited counter electrodes based on micro-patterned ITO glass to quasi-solid state dye-sensitized solar cells
180
Application of PTR-TOF-MS to investigate metabolites in exhaled breath of patients affected by coeliac disease under gluten free diet
181
Application of PTV injection in GC analysis of PAHs emitted from incense burning in indoor environment
182
Application of pulse charging techniques to submarine lead-acid batteries
183
Application of pulse detonation technology for boiler slag removal
184
Application of pulse discharge sintering (PDS) technique to rapid synthesis of Ti3SiC2 from Ti/Si/C powders
185
Application of pulse height spectral analysis to double-label counting of 35S−32P
186
Application of Pulse Method to Incremental Slitting Measurement of Residual Stresses in Laminated Composites
187
Application of pulse mixing method in software coincidence counting
188
Application of pulsed digital oscillators to volatile organic compounds sensing
189
Application of Pulsed Eddy Current Technique in Stress and Residual Stress Measurement
190
Application of Pulsed Electric Fields to Skim Milk inoculated with Staphylococcus aureus
191
Application of Pulsed Field Gel Electrophoresis for Study of Genetic Diversity in Mycobacterium tuberculosis Strains Isolated From Tuberculosis Patients
192
Application of pulsed laser irradiation for removal of hydrogen retained in tungsten
193
Application of pulsed laser methods to in situ probing of highway originated pollutants
194
Application of pulsed light to patulin reduction in McIlvaine buffer and apple products
195
Application of pulsed-field gel electrophoresis for molecular identification of pathogenic Leptospira species in Iran: a rapid and reliable method
196
Application of pulsed-field gel electrophoresis to characterise and trace the prevalence of Enterobacter sakazakii in an infant formula processing facility
197
Application of pulse-shape discrimination to coplanar CdZnTe detectors
198
Application of pulse-shape discrimination to coplanar CdZnTe detectors
199
APPLICATION OF PUMICE AGGREGATE IN STRUCTURAL LIGHTWEIGHT CONCRETE
200
Application of purge and trap extraction and gas chromatography for determination of minor esters in cider
201
Application of push-off shear test for evaluation of wetting-interface structure-bonding relationship of solder joints
202
Application of PV and Solar Energy in Water Desalination System
203
Application of PVPP-OXA as an Efficient Catalyst for the Synthesis of Mono and Bulky 1,8-dioxooctahydroxanthenes
204
Application of PWO crystals for detection of low-activity gamma-radiation in the energy range above 3 MeV
205
Application of PWO crystals for detection of low-activity gamma-radiation in the energy range above 3 MeV
206
Application of pyridylazo and thiazolylazo reagents in flow injection preconcentration systems for determination of metals
207
Application of pyrolysis-gas chromatography and hierarchical cluster analysis to the discrimination of the Chinese traditional medicine Dendrobium candidum Wall. ex Lindl.
208
Application of pyrolysis-gas chromatography and hierarchical cluster analysis to the discrimination of the Chinese traditional medicine Dendrobium candidum Wall. ex Lindl.
209
Application of pyrolysis–gas chromatography/mass spectrometry for characterisation of dissolved organic matter before and after alum treatment
210
Application of pyrolysis–gas chromatography/mass spectrometry for the identification of polymeric materials in failure analysis in the automotive industry
211
Application of pyrolysis-gas chromatography/mass spectrometry to study changes in the organic matter of macro- and microaggregates of a Mediterranean soil upon heating
212
Application of pyrolysis-gas chromatography-mass spectrometry to the analysis of pitch deposits and synthetic polymers in pulp and pulp mills
213
Application of pyrolysis-GC/MS for rapid assessment of organic contamination in sediments from Barcelona harbor
214
Application of Qa ida Al-Kharaj Bal Daman (the Warranty Rule) in the Chapters of Islamic Jurisprudence and Law
215
Application of Q-learning with temperature variation for bidding strategies in market based power systems
216
Application of QSAR analysis to organic anion transporting polypeptide 1a5 (Oatp1a5) substrates Original Research Article
217
Application of QSAR Method in the Design of Enhanced Antimalarial Derivatives of Azetidine-2-carbonitriles, their Molecular Docking, Drug-likeness, and SwissADME Properties
218
Application of QSPR for prediction of percent conversion of esterification reactions in supercritical carbon dioxide using least squares support vector regression
219
Application of quadrature method of moments to the polydispersed droplet spectrum in transonic steam flows with primary and secondary nucleation
220
Application of qualitative and quantitative methods to enrich understanding of emotional and motivational aspects of learning
221
Application of qualitative research in management (why, when and how)
222
Application of Quality Assurance Strategies in Diagnostics and Clinical Support Services in Iranian Hospitals
223
Application of Quality Function Deployment (QFD) to improve product design quality in school furniture
224
Application of quality function deployment in the semiconductor industry: A case study
225
Application of quality management criteria to regional growth management: Lessons from South East Queensland
226
Application of quantifier elimination to a simple elastic beam finite element below a straight rigid obstacle
227
Application of quantitative coronary angiography in a cineless environment: In vivo assessment of a fully automated system for clinical use
228
Application of quantitative IR spectral analysis of bacterial cells to acetone–butanol–ethanol fermentation monitoring Original Research Article
229
Application of Quantitative Microbial Risk Assessment to analyze the public health risk from poor drinking water quality in a low income area in Accra, Ghana Original Research Article
230
Application of Quantitative Risk Assessment in Wellbore Stability Analysis of Directional Wells
231
APPLICATION OF QUANTITATIVE SOCIOLOGICAL APPROACHES IN LANDSCAPE PLANNING
232
Application of Quantitative Structure-Activity Relationship Modeling to the Evaluation of the Changes in Enzymatic Activity of Carboxypeptidase Y upon Chemical Modifications
233
Application of quantitative structure–activity relationship to the determination of binding constant based on fluorescence quenching
234
Application of Quantitative Structure–Activity Relationships for Assessing the Aquatic Toxicity of Phthalate Esters
235
Application of Quantize Solution Method for Solving Adsorption Processes Equations
236
Application of quantum chemical calculations of 13C NMR chemical shifts to quinoxaline structure determination
237
Application of quantum chemical descriptor in quantitative structure activity and structure property relationship
238
Application of quantum descriptors for predicting adsorption performance of starch and cyclodextrin adsorbents
239
Application of quantum dots as analytical tools in automated chemical analysis: A review Review Article
240
Application of quantum dots in clinical and alimentary fields using multicommutated flow injection analysis
241
Application of quantum Hall edge channels
242
Application of quantum-chemical approximations to environmental problems: Prediction of physical and chemical properties of TNT and related species Original Research Article
243
Application of quantum-inspired binary gravitational search algorithm for thermal unit commitment with wind power integration
244
Application of quartz crystal for the supercapacity studies of Ppy/anion composites
245
Application of quartz inversion phenomenon in mineral processing – A case study of siliceous manganese ores
246
APPLICATION OF QUASI MONTE CARLO INTEGRATION TECHNIQUE IN EFFICIENT CAPACITANCE COMPUTATION
247
Application of quasi-chemical models to liquid–liquid equilibrium calculations for ternary systems containing water, propionic acid and organic solvents
248
Application of quasi-isothermal thermogravimetry for estimation of some properties of hydration layers in mesoporous adsorbents
249
Application of quasi-optical approach to construct RF power supply for TeV linear colliders
250
Application of quasi-optimal weights to searches of anomalies. Statistical criteria for step-like anomalies in cumulative spectra
251
Application of quasi-optimal weights to searches of anomalies. Statistical criteria for step-like anomalies in cumulative spectra
252
Application of Quasi-Orthogonal Space-Time Block Codes in Beamforming
253
Application of QuEChERS method for extraction of selected persistent organic pollutants in fish tissue and analysis by gas chromatography mass spectrometry
254
Application of quenching to create highly triaxial residual stresses in type 316H stainless steels
255
Application of quenching to create highly triaxial residual stresses in type 316H stainless steels
256
Application of quenching to create highly triaxial residual stresses in type 316H stainless steels
257
Application of quenching–partitioning–tempering process and modification to a newly designed ultrahigh carbon steel
258
Application of Queuing Analytic Theory to Decrease Waiting Times in Emergency Department: a review
259
Application of Queuing Analytic Theory to Decrease Waiting Times in Emergency Department: Does it Make Sense?
260
Application of Queuing Analytic Theory to Decrease Waiting Times in Emergency Department: Does it Make Sense?
261
Application of queuing theory in inventory systems with substitution flexibility
262
Application of queuing theory in production-inventory optimization
263
Application of Queuing Theory to Optimize Waiting-Time in Hospital Operations
264
Application of Queuing Theory to Vehicular Traffic at Signalized Intersection in Kumasi-Ashanti Region, Ghana
265
Application of QUIZ for GM quantification in food
266
Application of quotient pyrometry to industrial pulverised coal combustion
267
Application of r- and hr-adaptive BEM to two-dimensional elastic problem
268
Application of radar and seismic methods for the investigation of temperate glaciers
269
Application of radar data to modeling rainfall-induced landslides
270
Application of radial basis function and generalized regression neural networks in non-linear utility function specification for travel mode choice modelling
271
Application of radial basis function networks for solar-array modelling and maximum power-point prediction
272
Application of radial basis function neural networks to short-term streamflow forecasting
273
Application of Radial Basis Functions — Partial Least Squares to non-linear pattern recognition problems: diagnosis of process faults
274
Application of radial basis functions to linear and nonlinear structural analysis problems
275
Application of Radial Effective Thermal Conductivity for Heat Transfer Model of Steel Coils in HPH Furnace
276
Application of radiant cooling as a passive cooling option in hot humid climate
277
Application of radiation modes to the problem of low-frequency noise from a highway bridge
278
Application of radiation sources to simulate the radiation environment in low earth orbit: results on optoelectronic devices for International Space Station
279
Application of radiation sources to simulate the radiation environment in low earth orbit: results on optoelectronic devices for International Space Station
280
Application of Radio Echo Sounding at the arid Andes of Argentina: the Agua Negra Glacier
281
Application of radio frequency identification technology to study library usersʹ information-seeking behavior Original Research Article
282
Application of radio-frequency identification systems to collision avoidance in metal/nonmetal mines
283
Application of Radio-Frequency Plasma Glow Discharge to Removal of Uranium Dioxide from Metal Surfaces
284
Application of radio-frequency wave and micro-wave devices in drying and bleaching of wooden pulp
285
Application of radioimmunoassay in the screening of polychlorinated biphenyls in cowʹs milk
286
Application of radiometric temperature determination methods to semiconductor gas sensors
287
Application of Radiomics and Decision Support Systems for Breast MR Differential Diagnosis
288
Application of radiosurgery principles to a target in the breast: A dosimetric study
289
Application of radon-222 to investigate groundwater discharge into small shallow lakes
290
Application of Raman microspectroscopy to the characterisation of bioactive materials
291
Application of Raman spectroscopy to identify iron minerals commonly found in mine wastes
292
Application of Raman spectroscopy to the characterization of carbon-based materials: Recent advances and their applications to nano-carbons
293
Application of Raman spectroscopy to the study of the phase composition of phosphate based glass-ceramics
294
Application of Ramsey model in transition economy: A Russian case study
295
Application of Random Amplified Microsatellite Polymorphism (RAMP) in Prunus Characterization and Mapping
296
Application of Random Amplified Polymorphic Analysis for the Detection Genetic Variation in Tomato (Lycopersicon Esculentum Mill.)
297
Application of Random Amplified Polymorphic DNA (RAPD) to Detect the Genotoxic Effect of Cadmium on Tow Iranian Ecotypes of cumin (Cuminum cyminum)
298
Application of random and regular input in analytical separation methods: A critical insight
299
Application of random forests method to predict the retention indices of some polycyclic aromatic hydrocarbons
300
Application of random forests to select premium quality vegetable oils by their fatty acid composition
301
Application of random matrix theory to quasiperiodic systems
302
Application of random pore model for synthesis gas production by nickel oxide reduction with methane
303
Application of Random Radial Point Interpolation Method to Foundations Bearing Capacity Considering Progressive Failure
304
Application of random restart to genetic algorithms
305
Application of random theory in determining the optimum producing well numbers for oil and gas reservoirs
306
Application of Randomization Techniques to Space-Time Convolutional Codes
307
Application of Rank(Sr), a maturity index based on chemical analyses of coals
308
Application of RANS turbulence closure models to flows subjected to electromagnetic and buoyancy forces
309
Application of RAPD (Random Amplified Polymorphic DNA) marker for sex determination of Pistacia vera L.
310
Application of RAPD and cytochrome b sequences to the study of genetic variations in F1 and F2 generations of two different strains of guppy (Poecilia reticulata, Peter 1854)
311
Application of RAPD-PCR for Virulence Type Analysis within Verticillium dahliae and V. longisporum
312
Application of rapid and simple liquid chromatography method for determination of bioequivalence of generic lamotrigine tablets in healthy Iranian volunteers
313
Application of Rapid Prototyping in Prosthodontics
314
Application of rapid random stimulation (RRS) to visual evoked potentials in children
315
Application of rapid solidification powder metallurgy processing to prepare Cu–Al–Ni high temperature shape memory alloy strips with high strength and high ductility
316
Application of rapid solidification powder metallurgy to the fabrication of high-strength, high-ductility Mg–Al–Zn–Ca–La alloy through hot extrusion Original Research Article
317
Application of Rapid Visco Analyser (RVA) viscograms and chemometrics for maize hardness characterisation
318
Application of rapidly generated bidentate ligand libraries to zinc catalyzed reductions
319
Application of rare earth elements in cemented carbide inserts, drawing dies and mining tools
320
Application of rare earth elements in cemented carbide inserts, drawing dies and mining tools
321
Application of Rare Earth Phosphate Fertilizer in Western Area of China
322
Application of Rare Earths in Advanced Ceramic Materials
323
Application of Rasch Analysis for Development and Psychometric Properties of Adolescents’ Quality of Life Instruments: A Systematic Review
324
Application of Rasch model for evaluating the quality of life in blind war veterans
325
Application of Rasch Model in Constructing Walkability Indices for Urban Neighborhood Area
326
Application of rate-ratio asymptotics to the prediction of extinction for methanol droplet combustion
327
Application of rational functions for the standard addition method
328
Application of raw and roasted date seeds for dyes removal from aqueous solution
329
Application of rbcL based molecular diversity analysis to algae in wastewater treatment plants
330
Application of RBF neural network to fault classification and location in transmission lines
331
Application of RBGR—a simple way for screening of oxygen tolerance in probiotic bacteria
332
Application of RCM for safety considerations in a steel plant
333
Application of RCM for safety considerations in a steel plant
334
Application of RCM to a medium scale industry
335
Application of RCM to a medium scale industry
336
Application of reaction calorimetry toward understanding the large scale chemistry of ethyl diazoacetate
337
Application of reaction sintering to the manufacturing of a spacecraft combustion chamber of SiC ceramics
338
Application of reactive cyclodextrin poly butyl acrylate preformed polymers containing nano-ZnO to cotton fabrics and their impact on fabric performance
339
Application of reactive cyclodextrin poly butyl acrylate preformed polymers containing nano-ZnO to cotton fabrics and their impact on fabric performance
340
Application of reactive oily bubbles to bastnaesite flotation
341
APPLICATION OF READER RESPONSE THEORY IN IRANIAN TERTIARY-LEVEL READING CLASSES: A ʹʹPRACTICAL DEMONSTRATIONʹʹ STUDY
342
Application of real options analysis for pharmaceutical R&D project valuation—Empirical results from a survey
343
Application of real options theory to forestry investment analysis
344
Application of real time PCR determination to assess interanimal variabilities in CYP1A induction in the European flounder (Platichthys flesus)
345
Application of real-time in situ spectroscopic ellipsometry and infrared spectroscopy for characterizing interface structure of a-Si:H layer
346
Application of real-time PCR assay for detection and quantification of Alexandrium tamarense and Alexandrium catenella cysts from marine sediments
347
Application of real-time PCR for quantitative determination of hepatic vitellogenin transcript levels in the striped sea bream, Lithognathus mormyrus
348
Application of real-time PCR for the detection of Strongyloides spp. in clinical samples in a reference center in Spain
349
Application of real-time PCR for total airborne bacterial assessment: Comparison with epifluorescence microscopy and culture-dependent methods
350
Application of Real-Time PCR method for evaluation of measles vaccine heat stability
351
Application of real-time PCR on the development of molecular markers and to evaluate critical aspects for olive oil authentication
352
Application of real-time PCR to detect Listeria monocytogenes in a mussel processing industry: Impact on control
353
Application of real-time quantitative PCR for the detection of selected bacterial pathogens during municipal wastewater treatment
354
Application of real-time RT-PCR to quantifying gene expression of matrix metalloproteinases and tissue inhibitors of metalloproteinases in human abdominal aortic aneurysm
355
Application of real-time RT–PCR to study gene expression in active dry yeast (ADY) during the rehydration phase
356
Application of real-time voltage security assessment to the Hellenic interconnected system
357
Application Of Recent Innovative Ideas In IOT And Communication For Rural Development
358
Application of recent iron evaluations of ENDF/B, JEF and JENDL to neutron transport calculations through light water reactor pressure vessel
359
Application of recently developed approaches to microstructural characterization and yield strength modeling of aluminum alloy AA7030
360
Application of recently developed elliptic blending based models to separated flows
361
Application of receptor modeling to atmospheric constituents at Potsdam and Stockton, NY
362
Application of receptor models on water quality data in source apportionment in Kuantan River Basin
363
Application of recipes for isothermal and isochronal solid-state transformations
364
Application of Recombinant Proteins for Serodiagnosis of Visceral Leishmaniasis in Humans and Dogs
365
Application of reconstruction techniques to correctly identify the myocardium in the presence of overlying organs
366
Application of recoverable nanosized palladium(0) catalyst in Sonogashira reaction
367
APPLICATION OF RECTIFIED-VOLTAGE PWM FOR POWER FACTOR CORRECTION
368
APPLICATION OF RECTIFIED-VOLTAGE PWM FOR POWER FACTOR CORRECTION
369
Application of recurrence plots as a new tool in the analysis of electrochemical oscillations of copper
370
Application of recurrent neural network to predict bacterial growth in dynamic conditions
371
Application of recurrent neural networks in batch reactors: Part II: Nonlinear inverse and predictive control of the heat transfer fluid temperature
372
Application of recurrent neural networks in bCitch reactors Part 1. NARMA modelling of the dynamic behaviour of the heat transfer fluid temperature
373
Application of recycled coarse aggregate by mixture to concrete construction
374
Application of Recycled Rubber from Scrap Tyres in the Adsorption of Toluene from Aqueous Solution
375
Application of red mangrove plant (Rhizophora racemosa) extracts as pH indicator
376
Application of Reddyʹs third-order theory to delaminated orthotropic composite plates
377
Application of redox cycling enhanced current at an interdigitated array electrode for iron-trace determination in ultrapure spectral carbon
378
Application of reduced differential transformation method for solving Fourth-Order Parabolic Partial Differential Equations
379
Application of reduced graphene oxide and carbon nanotube modified electrodes for measuring the enzymatic activity of alcohol dehydrogenase
380
Application of reduction mammaplasty in treatment of giant breast tumour
381
Application of reduction mammaplasty in treatment of giant breast tumour
382
Application of redundancy analysis to hydroclimatology: A case study of spring heavy floods in southern Québec (Canada)
383
Application of reflectance near infrared spectroscopy for bread analyses
384
Application of Reflectance Spectroscopy for Analysis of Higher Plant Pigments
385
Application of Reflective Photography Technique in Visual-Semantic Evaluation from Citizens Point of View (Case Study: Urban Landscape of Shiraz)
386
Application of refraction contrast tomography
387
Application of refraction contrast tomography
388
Application of refractive index mixing rules in binary systems of hexadecane and heptadecane with n-alkanols at different temperatures
389
Application of refrigeration system in electronics cooling
390
Application of regional earthquake mitigation optimization
391
Application of Regional Phase Amplitude Tomography to Seismic Verification
392
Application of regression and artificial neural network analysis in modelling of tool–chip interface temperature in machining
393
APPLICATION OF REGRESSION MODEL ON STREAM WATER QUALITY PARAMETERS
394
Application of regression models to predict harmonic voltage and current growth trend from measurement data at secondary substations
395
Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data
396
Application of regulations to cosmetic lasers in private practice
397
Application of regulations to cosmetic lasers in private practice
398
Application of reinforced frontal affinity chromatography and advanced processing procedure to the study of the binding property of a Caenorhabditis elegans galectin
399
Application of reinforcement learning for agent-based production scheduling
400
Application of reinforcement learning in robot soccer
401
Application of reinforcement learning to the game of Othello
402
Application of relations of singularity intensities of tangent derivatives of boundary displacements and tractions to BEM
403
Application of relative positioning in topographic survey preparations on a full basis in artillery
404
Application of relaxation periods during electrodialysis of a casein solution: Impact on anion-exchange membrane fouling
405
Application of relevance vector machine and survival probability to machine degradation assessment
406
Application of reliability analysis method to fusion component testing
407
Application of Reliability in Stability Analysis of an Earth Dam
408
Application of reliability models with covariates in spare part prediction and optimization – A case study
409
Application of reliability models with covariates in spare part prediction and optimization – A case study
410
Application of remediation techniques for immobilization of metals in soils contaminated by a pyrite tailing spill in Spain
411
Application of remote handling compatibility on ITER plant
412
Application of remote sensing and geographic information data in developing soil classificatoin maps of some soils in nile-delta
413
Application of remote sensing and geographical information system in mapping land cover of the national park
414
Application of Remote Sensing in Diseases Monitoring and Dispersion
415
Application of Remote Sensing in Lithological Mapping of Umm Tawat Precambrian Rock Assemblage, North Eastern Desert, Egypt
416
Application of Remote Sensing in Monitoring of Faults
417
Application of remote sensing in the hydrotectonic Analysis of Groundwater, West of Yazd, Central Iran
418
Application of Remote Sensing in the Identification of the Geological Terrain Features in Cameron Highlands, Malaysia(Aplikasi Penderiaan Jauh di dalam Pengcaman Fitur Terain Geologidi Cameron Highlands, Malaysia)
419
Application of Remote Sensing Techniques and GIS-Multicriteria decision Analysis for Groundwater Potential Mapping in Souss Watershed, Morocco
420
Application of Remote Sensing Techniques in Enhancement, Detection, and Slicing of Koopan Lateralized Ultrabasics (South of Bavanat, Fars Province)
421
Application of remote sensing to identify coalfires in the Raniganj Coalbelt, India
422
Application of remote sensing to parks and protected area monitoring: Introduction to the special issue
423
Application of remotely sensed thermal information to urban climatology of Central European cities
424
Application of Removable Wrist Splint in the Management of Distal Forearm Torus Fractures
425
Application of renewable energy sources and new building technologies for the Philippine single family detached house
426
Application of renewable energy sources in the Greek islands of the South Aegean Sea
427
Application of renewable silver amalgam annular band electrode to voltammetric determination of vitamins C, B1 and B2
428
Application of renewal theory to call handover counting and dynamic location management in cellular mobile networks
429
Application of Renormalization Group Model to the Numerical Simulation of Tidal Current in the Qiongzhou Channel
430
Application of renormalization group techniques to transport in the presence of nonlinear sources and sinks
431
Application of Repetitive Extragenic Palindromic Elements Based on PCR in Detection of Genetic Relationship of Lactic Acid Bacteria Species Isolated from Traditional Fermented Food Products
432
Application of Replacement Theory in Determination of Pavement Design Life
433
Application of replicated difference testing
434
Application of Reproducing Kernel Particle Methods in electromagnetics Original Research Article
435
Application of reproductive biotechnology in animals: implications and potentials: Applications of reproductive cloning
436
application of republic of indonesia supreme court regulation no. 13 of 2016 concerning procedures for subscribing to criminal cases by corporations in corporate criminal responsibility in indonesia based on the decision of the central jakarta district court number: 94 / pid.sus-tpk / 2017 / pn. jkt.pst
437
Application of RES methods for computation of hydrodynamic flows by an example of a 2D flow past a circular cylinder for Re = 5–200
438
Application of resampling and linear spline methods to spectral and dispersional analyses of long-memory processes
439
Application of resampling and linear spline methods to spectral and dispersional analyses of long-memory processes
440
Application of residual correction method to laser heating process
441
Application of residual modification approach in seasonal ARIMA for electricity demand forecasting: A case study of China
442
Application of resilience thinking to evaluate the urban environments; a case study of Tehran, Iran
443
Application of resistance heating technique to mushy state forming of aluminium alloy
444
Application of resistance sintering technique to fabrication of metal matrix composite
445
Application of resonance functions in estimating the parameters of interwell zones
446
Application of resonant laser postionization SNMS for quantitative depth profiling in stainless steel with oxide film
447
Application of resonant ultrasound spectroscopy to determine elastic constants of plasma-sprayed coatings with high internal friction
448
Application of Resource-Based View Theory in Assessing of Efficiency of Companies Accepted in Tehran Stock Exchange by Data Envelopment Analysis
449
Application of respiration and FDA hydrolysis measurements for estimating microbial activity during composting processes
450
Application of response surface analysis to the photolytic degradation of Basic Red 2 dye
451
Application of response surface design to solvent, temperature and lipase selection for optimal monoglyceride production
452
Application of response surface method for optimization of dispersive liquid–liquid microextraction of water-soluble components of Rosa damascena Mill. essential oil
453
Application of response surface method for predicting electroless nickel plating
454
Application of Response Surface Method for Preparation, Optimization, and Characterization of Nicotinamide Loaded Solid Lipid Nanoparticles
455
Application of Response Surface Methodolody to Prediction of Dilution in Plasma Transferred Arc Hardfacing of Stainless Steel on Carbon Steel Original Research Article
456
Application of Response Surface Methodology for Removal of Remazol Yellow (RR) by Immobilised S. cerevisiae on Pumice Stone
457
Application of Response Surface Methodology (RSM) for Culture Conditions and Biomass Production of Psychrophilic Microalgae Isolated from High Mountains Lake During the ice-free Season
458
Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from palm oil mill wastewater using limestone roughing filter
459
Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from semi-aerobic landfill leachate using ion exchange resin Original Research Article
460
Application of response surface methodology (RSM) for optimization of sintering process for the preparation of magnesia partially stabilized zirconia (Mg-PSZ) using natural baddeleyite as starting material
461
Application of response surface methodology (RSM) in condition optimization for essential oil production from Citrus latifolia
462
Application of response surface methodology (RSM) to the optimization of a post-column luminol chemiluminescence analysis of silyl peroxides
463
Application of Response Surface Methodology and Artificial Neural Network for Analysis of p-chlorophenol Biosorption by Dried Activated Sludge
464
Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process
465
Application of response surface methodology and artificial neural networks for optimization of recombinant Oryza sativa non-symbiotic hemoglobin 1 production by Escherichia coli in medium containing byproduct glycerol
466
Application of response surface methodology and central composite design for the optimisation of supercritical fluid extraction of essential oils from Myrtus communis L. leaves
467
Application of response surface methodology and central composite design for the optimization of textile dye degradation by wet air oxidation
468
Application of response surface methodology and central composite rotatable design for modeling and optimization of a multi-gravity separator for chromite concentration
469
Application of response surface methodology and central composite rotatable design for modeling the influence of some operating variables of a Multi-Gravity Separator for coal cleaning
470
Application of Response Surface Methodology as an Efficient Approach for Optimization of Operational Variables in Benzene Hydroxylation to Phenol by V/SBA-16 Nanoporous Catalyst
471
Application of Response Surface Methodology for Catalytic Hydrogenation of Nitrobenzene to Aniline Using Ruthenium Supported Fullerene Nanocatalyst
472
Application of response surface methodology for extraction optimization of germinant pumpkin seeds protein
473
Application of response surface methodology for glucan production from Leuconostoc dextranicum and its structural characterization
474
Application of response surface methodology for glucan production from Leuconostoc dextranicum and its structural characterization
475
Application of response surface methodology for modeling and optimization of membrane distillation desalination process
476
Application of response surface methodology for modeling of ball mills in copper sulphide ore grinding
477
Application of Response Surface Methodology for Modeling the Color Strength of Natural Hair Colorant
478
Application of response surface methodology for optimization and determination of nickel by syringe to syringe dispersive liquid phase micro-extraction in environmental water and herb samples coupled with flame atomic absorption spectrometry
479
Application of response surface methodology for optimization of acidogenesis of cattail by rumen cultures
480
Application of response surface methodology for optimization of azo dye removal by oxalate catalyzed photoelectro-Fenton process using carbon nanotube-PTFE cathode Original Research Article
481
Application of response surface methodology for optimization of azocarmine B removal by heterogeneous photo-Fenton process using hydroxy-iron–aluminum pillared bentonite
482
Application of response surface methodology for optimization of biodiesel production by transesterification of soybean oil with ethanol
483
Application of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
484
Application of response surface methodology for optimization of important parameters in decolorizing treated distillery wastewater using Aspergillus fumigatus UB2 60
485
Application of response surface methodology for optimization of natural organic matter degradation by UV/H2O2 advanced oxidation process
486
Application of Response Surface Methodology for Optimization of Picker-Husker Harvesting Losses in Corn Seed
487
Application of Response Surface Methodology for Optimization of Platinum(IV) Adsorption Using Magnetic Cellulose Nanoparticles Modified with Ethylenediamine
488
Application of response surface methodology for optimization of polysaccharides production parameters from the roots of Codonopsis pilosula by a central composite design
489
Application of response surface methodology for optimization of the synthesis of synthetic rutile from titania slag
490
Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production
491
Application of Response Surface Methodology for preparation of low-cost adsorbent from citrus fruit peel and for removal of Methylene Blue Original Research Article
492
Application of response surface methodology for protein enrichment of cassava peel as animal feed by the white-rot fungus Panus tigrinus M609RQY
493
Application of Response Surface Methodology for Sago Wastewater Treatment by Ozonation
494
Application of response surface methodology for studying the influence of soaking, blanching and sodium hexametaphosphate salt concentration on some biochemical and physical characteristics of cowpeas (Vigna unguiculata) during canning Original Research A
495
Application of response surface methodology for studying the viscosity changes during canning of tarhana, a cereal-based food Original Research Article
496
Application of response surface methodology for the optimisation of micro friction surfacing process
497
Application of Response Surface Methodology for the Optimization of Cu and Zn Removals by Sorption on Pre-treated Oil Palm Frond (OPF)
498
Application of response surface methodology for the optimization of NaOH treatment on oil palm frond towards improvement in the sorption of heavy metals Original Research Article
499
Application of response surface methodology for the optimization of oxidants in wheat flour
500
Application of response surface methodology for the optimization of supercritical carbon dioxide extraction and ultrasound-assisted extraction of Capparis spinosa seed oil
501
Application of Response Surface Methodology for the Prediction of Different Operating Parameters in the Production of Mesua Ferrea Oil Methyl Ester
502
Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics
503
Application of Response Surface Methodology for Xanthan Gum and Biomass Production Using Xan-thomonas campestris
504
Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel
505
Application of Response Surface Methodology in Describing the Residual Stress Distribution in CO2 Laser Welding of AISI304
506
Application of Response Surface Methodology in Development of Sirolimus Liposomes Prepared by Thin Film Hydration Technique
507
Application of Response Surface Methodology in Study of the Product Yield Distribution of Thermal Cracking of Atmospheric Gasoil
508
Application of response surface methodology in the degradation of Reactive Blue 19 using H2O2/MgO nanoparticles advanced oxidation process
509
Application of response surface methodology in the optimization of cutting conditions for surface roughness
510
Application of response surface methodology in the parametric optimization of a pin-fin type heat sink
511
Application of Response Surface Methodology in the Preparation of Pectin-Caseinate Nanocomplexes for Potential Use as Nutraceutical Formulation: A Statistical Experimental Design Analysis
512
Application of response surface methodology on efficiency of fig leaf activated carbon for removal of methylene blue dye
513
Application of response surface methodology on investigating flank wear in machining hardened steel using PVD TiN coated mixed ceramic insert
514
Application of response surface methodology to assess the combined effect of operating variables on high-pressure coal gasification for H2-rich gas production
515
Application of Response Surface Methodology to Assess the Combined Effect of Operating Variables on the Direct Reduction of Fe2O3 by Coal Volatiles
516
Application of response surface methodology to cell immobilization for the production of palatinose
517
Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank
518
Application of response surface methodology to extract yields from stinging nettle under supercritical ethanol conditions
519
Application of response surface methodology to formulation of ionotropically gelled gum cordia/gellan beads
520
Application of response surface methodology to formulation of ionotropically gelled gum cordia/gellan beads
521
Application of Response Surface Methodology to laser-induced breakdown spectroscopy: Influences of hardware configuration
522
Application of Response Surface Methodology to laser-induced breakdown spectroscopy: Influences of hardware configuration
523
Application of response surface methodology to oil spill remediation
524
Application of response surface methodology to optimise extraction of flavonoids from fructus sophorae
525
Application of response surface methodology to optimise supercritical carbon dioxide extraction of essential oil from Cyperus rotundus Linn.
526
Application of Response Surface Methodology to optimization of a standard Ranque–Hilsch vortex tube refrigerator
527
Application of response surface methodology to optimize production of poly-ɛ-lysine by Streptomyces albulus IFO 14147
528
Application of Response Surface Methodology to Study the Effects of Brisket Fat, Soy Protein Isolate, and Cornstarch on Nutritional and Textural Properties of Rabbit Sausages
529
Application of response surfaces for reliability analysis of marine structures
530
Application of response surfaces for reliability analysis of marine structures
531
Application of results on Eshelby tensor to the determination of effective poroelastic properties of anisotropic rocks-like composites
532
Application of retention modelling to the simulation of separation of organic anions in suppressed ion chromatography
533
Application of reverse microdialysis in the evaluation of neural regulation of cardiovascular functions Original Research Article
534
Application of reverse osmosis technology for arsenic removal from drinking water Original Research Article
535
Application of reverse osmosis to reduce pollutants present in industrial wastewater Original Research Article
536
Application of reverse osmosis to remove aniline from wastewater Original Research Article
537
APPLICATION OF REVERSE TIME MIGRATION (RTM) PROCEDURE IN ULTRASOUND TOMOGRAPHY, NUMERICAL MODELING.
538
Application of Reverse Transcriptase –PCR (RT-PCR) for rapid detection of viable Escherichia coli in drinking water samples
539
Application of reverse transcriptase-nested-PCR for detection of poliovirus in mussels
540
Application of reversed micelles in bioengineering
541
Application of reverse-flow micellar electrokinetic chromatography for the simultaneous determination of flavonols and terpene trilactones in Ginkgo biloba dosage forms
542
Application of reversible immobilization techniques for biosensors Original Research Article
543
Application of RF electric field to a charged-particle trap in toroidal geometry
544
Application of RF electric field to a charged-particle trap in toroidal geometry
545
Application of RFID technology to prevention of collision accident with heavy equipment
546
Application of RFID tracking to the optimization of function-space assignment in buildings
547
Application of RFLP analysis of recA , gyrA and rpoS gene fragments for rapid differentiation of Erwinia amylovora from Erwinia strains isolated in Korea and Japan
548
Application of Rh(III)-Metalloporphyrin Grafted Fe3O4 Nanoparticles for the Extraction of Thiocyanate Ions from Aqueous Solutions
549
Application of RHA’s Pozzolanic Properties in the Making of CEB
550
Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil
551
Application of Rh-catalyzed cyclization for the construction of three consecutive chiral carbons in 4,9-dimethylspiro[4.4]nonane-2,7-dione
552
Application of Rheological Modeling in Food Emulsions
553
Application of rheological techniques for investigations of polymer branched structures
554
Application of rheology for assessment and prediction of the long-term physical stability of emulsions
555
Application of rheology to solving tailings disposal problems
556
Application of Rhizobacteria for Induced Resistance
557
Application of Rhizon SMS for the assessment of the hydrodynamic properties of unconsolidated fine grained materials
558
Application of rhodamine B thiolactone to fluorescence imaging of Hg2+ in Arabidopsis thaliana
559
Application of rhodamine B thiolactone to fluorescence imaging of Hg2+ in Arabidopsis thaliana
560
Application of ribbon burners to the flame treatment of polypropylene films
561
Application of Riboflavin-Deficient Rat Erythrocytes in the in Vitro Assay of Faba Bean Toxicity
562
Application of rice hull ash for turbidity removal from water
563
Application of rice husk and rice husk ash in organic reactions
564
Application of rice rhizosphere microflora for hydrogen production from apple pomace
565
Application of Richards function to the description of growth of Green gram
566
Application of ridge regression when the model is inherently imperfect: a case study of phase equilibrium
567
Application of Riemann-Green Functions on Solving Linearized Saint-Venants Equations
568
Application of Rietveld Refinement to Investigate the High Chromium White Cast Iron Austempered at Different Temperatures Original Research Article
569
Application of rigid body mechanics to theoretical description of rotation within F0F1-ATP synthase
570
Application of ring study: Water toxicity determinations by bioluminescence assay with Vibrio fischeri
571
Application of ring-polymer molecular dynamics to electronically nonadiabatic excess electron dynamics in water clusters: Importance of nuclear quantum effects
572
APPLICATION OF RISK ANALYSIS AND GEOGRAPHIC INFORMATION SYSTEM TECHNOLOGIES TO THE PREVENTION OF DIARRHEAL DISEASES IN NIGERIA
573
Application of risk informed safety margin characterization to extended power uprate analysis
574
Application of risk, cost–benefit and acceptability analyses to identify the most appropriate geosynthetic solution to mitigate sinkhole damage on roads
575
Application of risk-informed design methods to select the PSACS ultimate heat sink Original Research Article
576
Application of RNA interference to study stem cell function: current status and future perspectives
577
Application of RNB for high sensitive wear diagnostics in medicine technique and industry Original Research Article
578
Application of Road Information in Ground Moving Target Tracking
579
Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems
580
Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems
581
Application of robot offline programming in thermal spraying
582
Application of Robotic-Assisted Techniques to the Surgical Evaluation and Treatment of the Anterior Mediastinum
583
Application of robust and adaptive control techniques to cooperative manipulation
584
Application of robust and multimodel control methods to an ill-conditioned distillation column
585
Application of Robust Approach to Capacitated Location of Collection Sites and Capacitated Vehicle-routing Problem Model in an Urban Waste Management System
586
Application of Robust Estimation in Zero-difference Kinematical Orbit Determination of GPS-equipped Satellites
587
Application of robust fitting analysis techniques to low-resolution spectral data
588
Application of robust fitting analysis techniques to low-resolution spectral data
589
Application of robust multivariate control chart with Winsorized Mean: a case study
590
Application of robust NiTi–ZrO2–PEG SPME fiber in the determination of haloanisoles in cork stopper samples Original Research Article
591
Application of rock phosphate enriched composts increases nodulation, growth and yield of chickpea
592
Application of rock wool waste in cement-based composites
593
Application of Rodenticides for the Control of Zoonotic Cutaneous Leishmaniasis in Iran: A Systematic Review of the Literature
594
Application of rotary geosteering drilling in deep and thin reservoirs of Tarim Basin, NW China
595
Application of rotary microfiltration in debittering process of spent brewer s yeast
596
Application of rotating disk electrode technique for the preparation of Np, Pu and Am α-sources
597
Application of rotational resonance to inhomogeneously broadened systems
598
Application of RothPC-1 to soil carbon profiles in cracking soils under minimal till cultivation
599
Application of rough set and decision tree for characterization of premonitory factors of low seismic activity
600
Application of Rough Set Theory as a New Approach to Simplify Dams Location
601
Application of Rough Set Theory in Data Mining
602
Application of Rough Set Theory in Data Mining for Decision Support Systems (DSSs)
603
Application of rough set theory to feature selection for unsupervised clustering
604
Application of rough sets analysis to identify polluted aquatic sites based on a battery of biomarkers: a comparison with classical methods
605
Application of Ru(bpy)3 2+ in control and formation of gold surface nanostructure through oxidation–reduction cycling
606
Application of Rubber (Hevea Brasiliensis) Seeds Oil Extracted using Supercritical Carbon Dioxide in Cosmetics
607
Application of rule based methods to predicting storm surge
608
Application of rumen microbes to enhance food waste hydrolysis in acidogenic leach-bed reactors
609
Application of rumen microorganisms for anaerobic bioconversion of lignocellulosic biomass
610
Application of rumen microorganisms for enhanced anaerobic degradation of bagasse and maize bran
611
Application of run-on transcription method for studying the regulation of plastid genome expression
612
Application of rural slaughterhouse waste as an organic fertilizer for pot cultivation of solanaceous vegetables in India
613
Application of ruthenium induced cyclization for construction of strained biaryl ether macrocyclic compounds
614
Application of rutile thermometry to eclogites
615
Application of S transform in fault diagnosis of power electronics circuits
616
Application of saccharose as copper(II) ligand for electroless copper plating solutions Original Research Article
617
Application of SAFER model to the Los Angeles PM10 data
618
Application of SAFES (systematic approach to food engineering systems) methodology to apple candying Original Research Article
619
Application of safes (systematic approach to food engineering systems) methodology to dehydration of apple by combined methods Original Research Article
620
Application of SAFES (systematic approach to food engineering systems) methodology to French fries manufacture Original Research Article
621
Application of SAFES methodology in Manchego-type cheese manufacture Original Research Article
622
Application of SAFT equation for CO2 + H2O phase equilibrium calculations over a wide temperature and pressure range
623
Application of SAFT–VRX to binary phase behaviour: alkanes
624
Application of salesman-like recommendation system in 3G mobile phone online shopping decision support
625
APPLICATION OF SALICYLIC ACID AND SOME FUNGICIDES AS SEED TREATMENT FOR CONTROLLING DAMPING-OFF AND ROOT ROT DISEASES OF SQUASH AND CANTALOUPE PLANTS UNDER FIELD CONDITIONS
626
Application of salicylic acid dosimetry to evaluate hydrodynamic cavitation as an advanced oxidation process
627
Application of salicylic acid dosimetry to evaluate hydrodynamic cavitation as an advanced oxidation process
628
Application of samarium diiodide (SmI2)-induced reduction of (gamma)-acetoxy-(alpha),(beta)-enoates with (alpha)specific kinetic electrophilic trapping for the synthesis of amino acid derivatives
629
Application of sample disruption methods in the extraction of anthocyanins from solid or semi-solid vegetable samples
630
Application of Sample Selection Model in Estimating Response Functions for Nitrate Percolation
631
APPLICATION OF SAPROPEL IN AGRICULTURAL PRODUCTION
632
Application of satellite and ground-based data to investigate the UV radiative effects of Australian aerosols
633
Application of Satellite Data and Data Mining Algorithms in Estimating Coverage Percent (Case study: Nadoushan Rangelands, Ardakan Plain, Yazd, Iran)
634
Application of satellite data and GIS in studying air pollutants in Tehran
635
Application of satellite infrared data for mapping of thermal plume contamination in coastal ecosystem of Korea
636
Application of satellite remote sensing techniques for estimating air–sea CO2 fluxes in Hudson Bay, Canada during the ice-free season
637
Application of SBA-15 mesoporous material as the carrier for drug formulation systems. Papaverine hydrochloride adsorption and release study
638
Application of SBA-Pr-SO3H as a nanoreactor in the one-pot synthesis of spiroquinazolinones
639
Application of SBA-Pr-SO3H as a solid acid nanoreactor in the Biginelli reaction
640
Application of scaffold materials in tissue reconstruction in immunocompetent mammals: Our experience and future requirements
641
Application of scaled boundary finite element method in static and dynamic fracture problems
642
Application of scaled particle theory in extractive distillation with salt
643
Application of scaled particle theory to the partial molar volumes of some tetradentate N2O2 type Schiff bases in ionic liquid + DMF solutions
644
Application of scanning deep level transient spectroscopy for characterisation of multicrystalline silicon
645
Application of scanning deep level transient spectroscopy for characterisation of multicrystalline silicon
646
Application of Scanning Electron-Acoustic Microscopy to Biological Materials
647
Application of scanning methods to distinguish between entropy and enthalpy driven phase transitions
648
Application of scanning mid-IR-laser microscopy for characterization of semiconductor materials for photovoltaics
649
Application of scanning near-field optical microscopy to thin organic film devices
650
Application of scanning near-field optical microscopy to thin organic film devices
651
Application of scanning probe microscopies to oxide catalysts
652
Application of scanning thermal microscopy for investigation of thermal boundaries in multilayered photonic structures
653
Application of scanning thermal microscopy for investigation of thermal boundaries in multilayered photonic structures
654
Application of scanning tunneling-field emission microscopy for investigations of field electron emission from nanoscale diamond films
655
Application of scanning tunneling-field emission microscopy for investigations of field electron emission from nanoscale diamond films
656
Application of SCB Test and Surface Free Energy Method in Evaluating Crack Resistance of SBS Modified Asphalt Mixes
657
Application of Schauder fixed point theorem to a coupled system of differential equations of fractional order
658
Application of Schlieren Interferometry to Temperature Measurements During Laser Welding of High-Density Polyethylene Films
659
Application of Schmidt hammer relative age dating to Late Pleistocene moraines and rock glaciers in the Western Tatra Mountains, Slovakia
660
Application of Schmidt rebound number for estimating rock strength under specific geological conditions
661
Application of scientific criteria to food allergens of public health importance
662
Application of scientometric methods to chemical research in Iran: Reflections on Iranʹs current science policy
663
Application of SCOR Model in an Oil- producing Company
664
Application of screening tools to detect risk of hospital readmission in elderly patients in Valencian Healthcare System (VHS) (Spain)
665
Application of Screens and Trips in Enhancement of Flow Characteristics in Subsonic Wind Tunnels
666
Application of screw displacement axes to quantify elbow instability
667
Application of SEAFP waste recycling and clearance strategies to ITER
668
Application of seamless vertical profiles for use in the topside electron density modeling Original Research Article
669
Application of seawater to enhance SO2 removal from simulated flue gas through hollow fiber membrane contactor
670
Application of seaweed and salicylic acid on qualitative and qualitative traits of field pumpkin, Cucuorbita pepo L. in Khorramabad, Iran
671
Application of seaweed and salicylic acid on qualitative and qualitative traits of field pumpkin, Cucuorbita pepo L. in Khorramabad, Iran
672
Application of SeaWIFS- and AVHRR-derived data for mesoscale and regional validation of a 3-D high-resolution physical–biological model of the Gulf of St. Lawrence (Canada)
673
Application of SeaWiFS data for studying variability of bio-optical characteristics in the Barents, Black and Caspian Seas
674
Application of SeaWinds scatterometer and TMI-SSM/I rain rates to hurricane analysis and forecasting
675
Application of SECM in tracing of hydrogen peroxide at multicomponent non-noble electrocatalyst films for the oxygen reduction reaction
676
Application of second generation wavelets to blind spherical deconvolution
677
Application of SeDeM Expert system in formulation development of effervescent tablets by direct compression
678
Application of SeDeM Expert system in formulation development of effervescent tablets by direct compression
679
Application of sediment cores in reconstruction of long-term temperature and metal contents at the northern region of the Persian Gulf
680
APPLICATION OF SEDIMENTARY FECAL STANOLS AND STEROLS IN TRACING SEWAGE POLLUTION IN COASTAL WATERS
681
Application of sedimentary-structure interpretation to geoarchaeological investigations in the Colorado River Corridor, Grand Canyon, Arizona, USA
682
Application of Seed Equilibrium Moisture Curves in Agro Physics
683
Application of Seemingly Unrelated Regression (SUR) in Determination of Risk Factors of Fatigue and General Health among the Employees of Petrochemical Companies
684
Application of SEIR Model in COVID-19 and The Effect of Lockdown on Reducing The Number of Active Cases
685
Application of Seismic and Resistivity methods to investigate Amiriyeh (Iran) site geology characterization from seismic Micro-zonation point of view
686
Application of seismic sedimentology to prediction of beach and bar sandbodies in gentle slope of lacustrine basin: A case study of the Lower Cretaceous in Chepaizi area, Junggar Basin, NW China
687
Application of SELDI-TOF-MS to identify serum biomarkers for renal cell carcinoma
688
Application of selected antagonistic strains against Phytophthora cryptogea on gerbera in closed soilless systems with disinfection by slow sand filtration
689
Application of selected geothermometers to Continental Intercalaire thermal water in southern Tunisia
690
Application of selected ion monitoring to the analysis of triacylglycerols in olive oil by high temperature-gas chromatography/mass spectrometry
691
Application of selected partial order tools to analyze fate and toxicity indicators of environmentally hazardous chemicals
692
Application of selective epitaxy for formation of ultra shallow SiGe-based junctions
693
Application of selective F1 decoupled 1H NMR for enantiomer resolution and accurate measurement of enantiomeric excess at low chiral substrate/auxiliary concentration
694
Application of selective non-catalytic reduction of NOx in small-scale combustion systems
695
Application of Selenium Nanoparticles on Sperm Quantity Indicators in Wistar Rat
696
Application of self consistent reaction field theory to thermally induced exothermic reaction in energetic molecules
697
Application of Self Organizing Map and SRTM data to characterize yardangs in the Lut desert, Iran
698
Application of self organizing maps for investigating network latency on a broadcast-based distributed shared memory multiprocessor
699
Application of self-annealing effect to the manufacturing of strips and wires showing high fatigue strength
700
Application of self-deconvolution method to shift-and-add solar imaging
701
Application of Self-Learning to Heating Process Control of Simulated Continuous Annealing Original Research Article
702
Application of self-organising neural networks in robot tracking control
703
Application of self-organizing competitive neural network in fault diagnosis of suck rod pumping system
704
Application of self-organizing maps for assessing soil biological quality
705
Application of self-organizing maps for the classification of chromatographic systems and prediction of values of chromatographic quantities
706
Application of self-organizing maps in analysis of wave soldering process
707
Application of self-organizing maps technique in downscaling GCMs climate change projections for Same, Tanzania
708
Application of self-organizing maps to chemical analysis
709
Application of Self-Oscillation of the Electrical Potential across the Water-Oil-Water Liquid Membrane to Quantitative Analysis of Aluminum Nitrate
710
Application of self-tuning PID control to a reactor of limestone slurry titrated with sulfuric acid
711
Application of SEM Analysis for Designing Strategic Model for Agricultural Sustainable Development (ASD) in Iran
712
Application of SEM to detect the structure of mesocarbon microbeads
713
Application of SEM XRMA data to lake ecosystem modelling
714
Application of SEM XRMA data to lake ecosystem modelling
715
Application of semantic features in face recognition
716
Application of Semantic Statements of Uqūq al-Wālidayn (Disobedience to Parents) from the Perspective of Qur’an and Hadith
717
Application of semantic technology for social network analysis in the sciences
718
Application of semi-active control strategies for seismic protection of buildings with MR dampers
719
Application of semi-analytic method to compute the moments for solution of logistic model
720
Application of semi-automatic metadata generation in libraries: Types, tools, and techniques
721
Application of semiconductor micro- and nanotubes in biology
722
Application of Semiconductor Photocatalysis for Effective Elimination of Organic Contaminants from Sewage
723
Application of semiempirical method (AM1) to the study of tautomeric equilibria in the gas phase for simple compounds containing the amidine group: 4(5)-substituted imidazoles
724
Application of semi-industrial monolithic columns for downstream processing of clotting factor IX
725
Application of semi-parametric single-index two-part regression and parametric two-part regression in estimation of the cost of functional gastrointestinal disorders
726
Application of semipermeable membrane device for assessing toxicity in drinking water
727
Application of semi-permeable membrane dialysis/ion trap mass spectrometry technique to determine polybrominated diphenyl ethers and polychlorinated biphenyls in milk fat Original Research Article
728
Application of semisolid joining—Part 4 glass/metal, plastic/metal, or wood/metal joining
729
Application of Sensitivity Analysis in Forest Road Networks Planning and Assessment
730
Application of sensitivity analysis to a model of Eucalyptus globulus plantation productivity
731
Application of sensitivity analysis to a model of Eucalyptus globulus plantation productivity
732
Application of sensitivity analysis to oil refinery emissions
733
Application of sensitivity analysis to oil refinery emissions
734
Application of sensor arrays based on thin films of conducting polymers for chemical recognition of volatile organic solvents
735
Application of sensory analysis to champagne wine characterisation and discrimination
736
Application of sepiolite to prevent bleeding and blooming for EPDM rubber composition
737
Application of sepiolite–cellulose pastes for the removal of salts from building stones
738
Application of Sepsis-3 Criteria to Korean Patients with Critical Illnesses
739
Application of sepsis-3 criteria to Korean patients with critical illnesses.
740
Application of Sequential Gaussian Conditional Simulation to Underground Mine Design Under Grade Uncertainty
741
Application of sequential injection analysis (SIA) to food analysis
742
Application of sequential injection-monosegmented flow analysis (SI-MSFA) to spectrophotometric determination of sulfide in simulated waters samples
743
Application of sequential injection–square wave voltammetry (SI–SWV) to study the adsorption of atrazine onto a tropical soil sample
744
Application of sequential integration for metabolic engineering of 1,2-propanediol production in yeast
745
Application of sequential Monte Carlo simulation to evaluation of distributions of composite system indices
746
Application of serial transformations in scan-based SOC test for test cost reduction
747
Application of Several Data-Driven Techniques for Rainfall-Runoff Modeling
748
Application of several multipotential step techniques to the study of multicenter molecules at spherical electrodes of any size
749
APPLICATION OF SEWAGE DRY SLUDGE IN CONCRETE MIXTURES
750
Application of sewage sludge compost on highway embankments
751
Application of sewage sludge for cereal production in a Mediterranean environment (Lebanon)
752
Application of sewage sludge in the manufacturing of ceramic tile bodies
753
Application of shakedown maps under variable loads
754
Application of shakedown theory to soil dynamics
755
Application of shakedown theory to soils with non associated flow rules
756
Application of shallow circumferential grooved wheels to creep-feed grinding
757
Application of shannon information theory to a comparison between L- and C-band SIR-C polarimetric data versus incidence angle
758
Application of Shannon wavelet for solving boundary value problems of fractional differential equations
759
Application of shannonʹs entropy to classify emergent behaviors in a simulation of laser dynamics
760
Application of Shape Analysis on 3D Images - MRI of Renal Tumors
761
Application of Shape Analysis on 3D Images - MRI of Renal Tumors
762
Application of shape factor to determine the permeability of perfusive particles
763
Application of shape memory alloy dampers in the seismic control of cable-stayed bridges
764
Application of shape memory alloy TiNi in low thermal expansion copper composites
765
Application of Shape Memory Alloys in Seismic Isolation: A Review
766
Application of Sharafutdinov’s Ray Transform in Integrated Photoelasticity
767
Application of shear induced structure materials for brine flooding in sandstone oil reservoirs
768
Application of shear wave elastography in fine needle aspiration biopsy for thyroid nodule
769
Application of shelf life decision system (SLDS) to marine cultured fish quality
770
Application of Sherman–Morrison matrix inversion formula to damped vibration absorbers attached to multi-degree of freedom systems
771
Application of shielded column liquid chromatography for determination of sulfamonomethoxine, sulfadimethoxine, and their N4-acetyl metabolites in milk
772
Application of shielding boronate affinity chromatography in the study of the glycation pattern of haemoglobin
773
Application of Shock Capturing Method for Free Surface Flow Simulation
774
Application of shock waves to rat skin decreases calcitonin gene-related peptide immunoreactivity in dorsal root ganglion neurons
775
Application of short monolithic columns for fast purification of plasmid DNA
776
Application of short repairs for fatigue life extension
777
Application of short-term bioassay guided chemical analysis for water quality of agricultural land run-off
778
Application of SiC-based power element to high current AC/DC converter system
779
Application of side reactors on ETBE reactive distillation
780
Application of Sigmoid function in the space of univalent functions based on subordination
781
Application of sigmoidal transformations to weakly singular and near-singular boundary element integrals
782
Application of Signal Processing Tools for Fault Diagnosis in Induction MotorsA ReviewPart II
783
Application of signaling protein 14-3-3 and 26 kDa glutathione-S-transferase to serological diagnosis of Schistosomiasis japonica
784
Application of signed digraphs-based analysis for fault diagnosis of chemical process flowsheets
785
Application of significance tests in quantitative metallographic analysis of a C–Mn–B steel
786
Application of silacyclic allylsilanes to the synthesis of β-hydroxy-δ-lactones: synthesis of Prelactone B
787
Application of silica aerogel encapsulated lipases in the synthesis of biodiesel by transesterification reactions
788
Application of silica as a catalyst support at high concentrations of methanol for direct methanol fuel cells
789
Application of silica gel organofunctionalized with 3(1-imidazolyl)propyl in an on-line preconcentration system for the determination of copper by FAAS
790
Application of silica gel-supported polyphosphoric acid (PPA/SiO2) as a reusable solid acid catalyst to the synthesis of 3-benzoylisoxazoles and isoxazolines
791
Application of silica vanadic acid as a dual Lewis and Bronsted acid catalytic ability in Dakin West reaction
792
Application of silica-based hyper-crosslinked sulfonate-modified reversed stationary phases for separating highly hydrophilic basic compounds
793
Application of silica-based monolith as solid phase extraction cartridge for extracting polar compounds from urine
794
Application of silicon strip detectors to small-animal imaging
795
Application of silicon strip detectors to small-animal imaging
796
Application of silicon strip detectors to X-ray computed tomography
797
Application of silicon strip detectors to X-ray computed tomography
798
Application of silicone membrane technology to increase quality and shelf life of fruits and vegetables: a review
799
Application of silver ion in the separation of macrolide antibiotic components by high-speed counter-current chromatography
800
Application of silver N-heterocyclic carbene complexes in O-glycosidation reactions Original Research Article
801
Application of Silver Sulfadiazine Cream With Early Surgical Intervention in Patients Suffering From Combined Burn-Blast Injury Facial Tattoos
802
Application of SIM-air modeling tools to assess air quality in Indian cities
803
Application of similarity coefficients to SIFT-MS data for livestock emission characterization
804
Application of similarity theory in the laser forming process
805
Application of simple negative feedback model for avalanche photodetectors investigation
806
Application of simple negative feedback model for avalanche photodetectors investigation
807
Application of simple practical models for early stage ageing precipitation kinetics and hardening in aluminium alloys
808
Application of simple practical models for early stage ageing precipitation kinetics and hardening in aluminium and magnesium composites
809
Application of simple sequence repeat (SSR) markers for molecular diversity and heterozygosity analysis in maize inbred lines
810
Application of simplest equations of Bernoulli and Riccati kind for obtaining exact traveling-wave solutions for a class of PDEs with polynomial nonlinearity
811
Application of simplified in vitro screening tests to detect genotoxicity of aristolochic acid
812
Application of simplified rapid equilibrium models in simulating experimental breakthrough curves from fixed bed biosorption reactors
813
Application of SIMPLISMA for the assessment of peak purity in liquid chromatography with diode array detection
814
Application of SIMPLISMA purity function for variable selection in multivariate regression analysis: A case study of protein secondary structure determination from infrared spectra
815
Application of SIMS analyses on oxygen transport in SOFC materials
816
Application of SIMS in microelectronics
817
Application of SIMS nano-analysis to the development of new metallurgical solutions
818
Application of simulated annealing algorithm for multi-criteria operation planning in flexible manufacturing systems
819
Application of Simulated Annealing and Genetic Algorithms in Solving Single Level Lot-Sizing Problems
820
Application of simulated annealing for estimating BAEPs in endocochlear pathologies
821
Application of simulated annealing for multispectral tomography Original Research Article
822
Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines
823
Application of simulated annealing for simultaneous retrieval of particle size distribution and refractive index
824
Application of simulated annealing fuzzy model tuning to umbilical cord acid-base interpretation
825
Application of simulated annealing method to pressure and force loading optimization in tube hydroforming process
826
Application of simulated annealing method to pressure and force loading optimization in tube hydroforming process
827
Application of Simulated Annealing Technique to Non-Linear Optimization of PC-SAFT for Petroleum Reservoir Fluids
828
Application of simulation models to the diagnosis of MSW landfills: An example
829
Application of simulation program to specific urban situation
830
Application of simulation technique to activity-based costing of agricultural systems: a case study
831
Application of simultaneous active and reactive power modulation of SMES unit under unequal α-mode for power system stabilization
832
Application of Simultaneous Morcellation in situ in Laparoscopic Myomectomy of Larger Uterine Leiomyomas
833
Application of simultaneous saccharification and fermentation (SSF) from viscosity reducing of raw sweet potato for bioethanol production at laboratory, pilot and industrial scales
834
Application of Sinc-collocation method for solving an inverse problem
835
Application of single and sequential extraction procedures to polluted and unpolluted soils
836
Application of single asperity abrasion process for surface micro-machining
837
Application of single drop liquid–liquid–liquid microextraction for the determination of fluoroquinolones in human urine by capillary electrophoresis
838
Application of single immunoaffinity clean-up for simultaneous determination of regulated mycotoxins in cereals and nuts
839
APPLICATION OF SINGLE OBJECTIVE GENETIC ALGORITHM TO OPTIMIZE HEAT TRANSFER ENHANCEMENT FROM A FLAT PLATE
840
Application of single pan thermal analysis to Cu–Sn peritectic alloys Original Research Article
841
Application of single point imaging (SPI) to solid state materials
842
Application of Single Program K° - Factor for Instrumental Neutron Activation Analysis )INAA)
843
Application of single step with three generalized hybrid points block method for solving third order ordinary differential equations
844
Application of Single Strand Conformation Polymorphism — PCR method for distinguishing cheese bacterial communities that inhibit Listeria monocytogenes
845
Application of single-drop microextraction and comparison with solid-phase microextraction and solid-phase extraction for the determination of α- and β-endosulfan in water samples by gas chromatography–electron-capture detection
846
Application of single-drop microextraction combined with in-microvial derivatization for determination of acidic herbicides in water samples by gas chromatography–mass spectrometry
847
Application of single-drop microextraction coupled with gas chromatography for the determination of multiclass pesticides in vegetables with nitrogen phosphorus and electron capture detection
848
Application of single-drop microextraction to the determination of dialkyl phthalate esters in food simulants
849
Application of single-sided silicon strip detector to energy and charge state measurements of medium energy ions in space
850
Application of single-sided silicon strip detector to energy and charge state measurements of medium energy ions in space
851
Application of single-strand conformation polymorphism to the study of bovine viral diarrhea virus isolates
852
Application of Single-Walled Carbon Nanotube and Poly (3-Methylthiophene) Modified Sensors for Electrochemical Determination of Levodopa and Benserazide
853
Application of single-walled carbon nanotube body to unique emitter: a first-principles study
854
Application of Single–Walled Carbon Nanotubes (SWCNT) in the Production of Glucose Biosensors and Improving Their Performance Using Gold Colloidal Nanoparticles and Usage of Polyaniline Nanostructure–Based Biosensors for Detecting Glucose and Cholesterol
855
Application of singular elements for fully Lagrangian modeling of dynamics of MEMS with thin beams
856
Application of singular spectrum analysis to the smoothing of raw kinematic signals
857
Application of singular value decomposition to the analysis of alpha-particle spectra
858
Application of singular value decomposition to the analysis of alpha-particle spectra
859
Application of Sinusoidal Functions to Partitioning Crude Protein and Metabolizable Energy Intake between Maintenance and Growth in Parent Stock of Broiler Chickens
860
Application of SiO2–poly(dimethylsiloxane) hybrid material in the fabrication of amperometric biosensor Original Research Article
861
Application of siRNA in targeting protein expression in kidney disease
862
Application of Si-strip technology to X-ray diffraction instrumentation
863
Application of Si-strip technology to X-ray diffraction instrumentation
864
Application of Six Sigma methodology for process design
865
Application of size-exclusion chromatography in the investigation of the in vitro stability of proinsulin and its cleaved metabolites in human serum and plasma
866
Application of size-exclusion chromatography to the analysis of shrimp for sulfonamide residues Original Research Article
867
Application of size-exclusion chromatography–inductively coupled plasma mass spectrometry for fractionation of element species in seeds of legumes
868
Application of sliding surface-enhanced fuzzy control for dynamic state estimation of a power system
869
Application of sliding-mode control to the design of a buck-basedsinusoidal generator
870
Application of slightly acidic electrolyzed water as a potential non-thermal food sanitizer for decontamination of fresh ready-to-eat vegetables and sprouts
871
Application of slightly overlapped circular particles assembly in numerical simulation of rocks with high friction angles
872
Application of SLM extraction for investigation of metal-humic acid bindings Original Research Article
873
Application of Sluice Gate in Different Positions and Its Effect on Hydraulic Parameters in Free-Flow Conditions
874
Application of slurry sample introduction to a low-power inductively coupled plasma atomic emission spectrometer incorporating a mini-torch
875
Application of small and micro cogeneration units
876
Application of small angle X-ray scattering (SAXS) for differentiation between normal and cancerous breast tissues
877
Application of small punch creep testing to a thermally sprayed CoNiCrAlY bond coat
878
Application of small-angle scattering for the identification of small amounts of platinum supported on porous silica Original Research Article
879
Application of small-angle scattering to the study of graphite-adsorbed hydrocarbons
880
Application of small-angle X-ray and neutron scattering techniques to the characterisation of starch structure: A review
881
Application of small-hole dry drilling in bimetal part
882
APPLICATION OF SMALL-SCALE EXPERIMENTAL MODELS FOR THERMAL COMFORT ASSESSMENT OF SUSTAINABLE BUILDING MATERIALS
883
Application of Smalltalk language for accelerator control
884
Application of Smalltalk language for accelerator control
885
Application of Smart Card security technology in manufacturing
886
Application of S-model learning automata for multi-objective optimal operation of power systems
887
Application of smoothed nite element method in coupled hydro-mechanical analyses
888
Application of Smoothing Methods for Determining of the Effecting Factors on the Survival Rate of Gastric Cancer Patients
889
Application of smoothing technique on twin support vector machines
890
Application of snakes and dynamic programming optimisation technique in modeling of buildings in informal settlement areas
891
Application of SnO2/Alumina Nanocatalyst in Removal of Naphthenic Acids from Crude Oil
892
Application of Snyder–Dolan classification scheme to the selection of “orthogonal” columns for fast screening of illicit drugs and impurity profiling of pharmaceuticals – I. Isocratic elution
893
Application of SO42−/TiO2 solid superacid in decontaminating radioactive pollutants
894
Application of Sobolev gradient method to Poisson–Boltzmann system
895
Application of social cognition principles to treatment recommendations for ethnic minority clients: The case of Asian Americans
896
Application of Social Cognitive Theory to Prevent Waterpipe Use in Male High-school Students in Kerman, Iran
897
Application of Social Marketing in Assisting Program Managers to Tackle Public Health Concerns
898
Application of socialscience on cardiorespiratory specialist courses
899
APPLICATION OF SODIUM C APRYLATE AS A STABILIZER DURING PASTEURIZATION OF INFUSIBLE PLATELET MEMBRANE AND EVALUATION OF ITS EFFECTIVENESS BY TURBIDITY ASSAY
900
Application of sodium dodecyl sulfate and humic acid as surfactants on electrokinetic remediation of cadmium-contaminated soil Original Research Article
901
Application of sodium dodecylsulfate (SDS) micellar solution as an organized medium for electropolymerization of thiophene derivatives in water
902
Application of soft and hard modeling methods to resolve the three competitive complex formation of 13 lanthanide-Arsenazo III complexes
903
Application of soft- and hard-modelling approaches to resolution of kinetics of electron donor–acceptor complex formation of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone with imipramine in different solutions Original Research Article
904
Application of soft computing approaches for modeling saturation pressure of reservoir oils
905
Application of Soft Computing in Forecasting Wave Height (Case Study: Anzali)
906
Application of Soft Computing in the Design and Optimization of Tuned Liquid Column–Gas Damper for Use in Offshore Wind Turbines
907
Application of Soft Computing Methods in the Analysis of Velocity Field in Dividing Channel
908
Application of soft computing models to hourly weather analysis in southern Saskatchewan, Canada
909
Application of Soft Computing to Automatic Music Information Retrieval
910
Application of soft operations research methods in healthcare: A systematic re- view
911
Application of Soft Sets to Determine Hamilton Cycles in a Graph
912
Application of soft systems methodology to trigger solar energy in Iranian buildings
913
Application of soft tissue modelling to image-guided surgery
914
Application of soft X-ray absorption spectroscopy and two-dimensional correlation spectroscopy to the electrochemical reaction in the Li1+xV3O8/Li cell
915
Application of soil enzyme activity test kit in a field experiment
916
Application of soil enzyme activity test kit in a field experiment
917
Application of soil mulches on establishment and growth of native and commercial tall fescue (Festuca arundinacea Schreb.) in an arid environment
918
Application of soil properties, auxiliary parameters, and their combination for prediction of soil classes using decision tree model
919
Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying
920
Application of solar assisted heating and desiccant cooling systems for a domestic building
921
Application of solar collectors to control the visible plume from wet cooling towers of a commercial building in Hong Kong: A case study
922
Application of solar energy for water supply and sanitation in Arsenic affected rural areas: a study for Kaudikasa village, India
923
Application of solar light for degradation of ammonia in petrochemical wastewater by a floating TiO2/LECA photocatalyst
924
Application of solar thermal desorption to remediation of mercury-contaminated soils
925
Application of solar-powered desalination in a remote town in South Australia Original Research Article
926
Application of sol–gel based octyl-functionalized mesoporous materials coated fiber for solid-phase microextraction
927
Application of solid oxide fuel cell for flare gas recovery as a new approach; a case study for Asalouyeh gas processing plant, Iran
928
Application of solid oxide fuel cell technology for power generation—A review
929
Application of solid phase extraction and high-performance liquid chromatography to qualitative and quantitative analysis of nucleotides and nucleosides in human cerebrospinal fluid
930
Application of solid phase extraction and two-dimensional gas chromatography coupled with time-of-flight mass spectrometry for fast analysis of polycyclic aromatic hydrocarbons in vegetable oils
931
Application of solid phase extraction with the use of silica modified with polyaniline film for pretreatment of samples from plant material before HPLC determination of triterpenic acids
932
Application of Solid Phase Microextraction (SPME) Sampler for Determination of Carbon Disulfide in Air
933
Application of Solid Phase Microextraction followed by Chromatograph-Flame Ionization Detector for Sampling and Analysis of Acetonitrile in Air
934
Application of solid phase microextraction on dental composite resin analysis
935
Application of solid phase microextraction to the determination of strychnine in blood
936
Application of solidified floating organic drop microextraction method for biomonitoring of chlorpyrifos and its oxon metabolite in urine samples
937
Application of solid–liquid phase transfer catalysis system for peroxyester synthesis: A kinetic study of hydroperoxides acylation in the presence of solid sodium carbonate Original Research Article
938
Application of solid-phase extraction and liquid chromatography–mass spectrometry to the determination of neonicotinoid pesticide residues in fruit and vegetables
939
Application of solid-phase extraction and micellar electrokinetic capillary chromatography to the study of hydrolytic and photolytic degradation of phenoxy acid and phenylurea herbicides
940
Application of solid-phase extraction coupled with freezing-lipid filtration clean-up for the determination of endocrine-disrupting phenols in fish Original Research Article
941
Application of solid-phase extraction to brewed coffee caffeine and organic acid determination by UV/HPLC
942
Application of solid-phase extraction to brewed coffee caffeine and organic acid determination by UV/HPLC
943
Application of solid-phase extraction to quantitatively determine cyproconazole and tebuconazole in treated wood using liquid chromatography with UV detection
944
Application of solid-phase extraction to the analysis of the isomers generated in biodesulfurization against methylated dibenzothiophenes
945
Application of solid-phase microextraction and gas chromatography–mass spectrometry for measuring chemicals in saliva of synthetic leather workers
946
Application of solid-phase microextraction and gas chromatography–mass spectrometry to the determination of volatile organic compounds in end-exhaled breath samples
947
Application of solid-phase microextraction combined with gas chromatography–mass spectrometry to the determination of butylated hydroxytoluene in bottled drinking water
948
Application of solid-phase microextraction for determination of organic vapours in gaseous matrices
949
Application of solid-phase microextraction for determination of pyrethroids in groundwater using liquid chromatography with post-column photochemically induced fluorimetry derivatization and fluorescence detection
950
Application of solid-phase microextraction for determining phenylurea herbicides and their homologous anilines from vegetables
951
Application of solid-phase microextraction for monitoring the photocatalytic decomposition of fenthion and parathion in aqueous TiO2 suspensions Original Research Article
952
Application of solid-phase microextraction for the determination of organophosphorous pesticides in aqueous samples by gas chromatography with flame photometric detector
953
Application of solid-phase microextraction for the determination of organophosphorus pesticides in textiles by gas chromatography with mass spectrometry Original Research Article
954
Application of solid-phase microextraction in the investigation of protein binding of pharmaceuticals
955
Application of solid-phase microextraction in the monitoring of priority pesticides in the Kalamas River (N.W. Greece)
956
Application of solid-phase microextraction to the analysis of volatile compounds in virgin olive oils
957
Application of solid-phase microextraction to the analysis of volatile compounds in virgin olive oils from five new cultivars
958
Application of solid-phase microextraction to the quantitative analysis of 1,8-cineole in blood and expired air in a Eucalyptus herbivore, the brushtail possum (Trichosurus vulpecula)
959
Application of solid-phase microextraction to the recovery of explosives and ignitable liquid residues from forensic specimens
960
Application of solid-phase microextraction to the study of the photochemical behaviour of five priority pesticides: “on-fiber” and aqueous photodegradation
961
Application of solid-phase microextraction to virgin olive oil quality control
962
Application of solid-phase microextraction–gas chromatography–mass spectrometry to characterize intermediates in a joint solar–microbial process for total mineralization of Aroclor 1254
963
Application of Solid-State 13C NMR Spectroscopy and Dipolar Dephasing Technique to Determine the Extent of Condensation in Technical Lignins
964
Application of solid-state fermentation to food industry—A review Original Research Article
965
Application of solid-state galvanic cells to the thermodynamic study of the CaO–SiO2–ZrO2 system
966
Application of soluble bio-organic substances (SBO) as photocatalysts for wastewater treatment: Sensitizing effect and photo-Fenton-like process
967
Application of soluble poly(3-alkylpyrrole) polymers on textiles
968
Application of solution structure theorem to non-Fourier heat conduction problems: Analytical approach
969
Application of solvent extraction for the removal of amoxicillin drug residues in environmental waters
970
Application of solvent microextraction in a single drop for the determination of new antifouling agents in waters
971
Application of solvent microextraction to the analysis of nitroaromatic explosives in water samples
972
Application of solvent-assisted dispersive solid phase extraction combined with flame atomic absorption spectroscopy for the determination of trace amounts of Cadmium
973
Application of some anisotropic damage model to the prediction of the failure of some complex industrial concrete structure
974
Application of Some Antifungal and Antioxidant Compounds Extracted from Some Herbs to Be Used in Cakes as Biopreservatives
975
Application of some aquatic plants as bio-indicators for petroleum hydrocarbon compounds in Um Alnaaj Marshes, Iraq
976
Application of some combined adsorbents to remove salinity parameters from drainage water Original Research Article
977
Application of some damage identification methods in offshore platforms
978
Application of Some Herbal Medicine Used for the Treatment of Osteoarthritis and Chondrogenesis
979
Application of sonic and radar tests on the piers and walls of the Cathedral of Noto
980
Application of sonication and mixing for nanoencapsulation of the cyanobacterium Spirulina platensis in liposomes
981
Application of Sonocatalyst and Sonophotocatalyst for Degradation of Acid Red 14 in Aqueous Environment
982
Application of Sonoelastography in Differential Diagnosis of Benign and Malignant Thyroid Nodules
983
Application of Sono–photo‑Fenton process for degradation of phenol derivatives in petrochemical wastewater using full factorial design of experiment
984
Application of Sorbent materials in Oil Spill management: A review
985
Application of Sorbent Waste Material for Porous Ceramics Production
986
Application of sorbents for mercury control for utilities burning lignite coal
987
Application of Sorghum, Sunflower and Rice Water Extract Combinations Helps in Reducing Herbicide Dose for Weed Management in Rice
988
Application of sorption heat recovery systems in heating appliances—Feasibility study
989
Application of source encoding to incoherent Talbot imaging and the Lau effect
990
Application of space periodic variation of light polarization in imaging polarimetry
991
Application of space–time CE/SE method to shallow water magnetohydrodynamic equations
992
Application of Space-time Conservation Element and Solution Element Method in Intake and Exhaust Flows of High Power Density Diesel Engine
993
Application of space–time conservation element and solution element method in streamline simulation
994
Application of space-time transmit diversity to single-carrier transmission with frequency-domain equalisation and receive antenna diversity in a frequency-selective fading channel
995
Application of spallation neutron sources in support of radiation hardness studies
996
Application of spallation neutron sources in support of radiation hardness studies
997
Application of Sparse Linear Discriminant Analysis and Elastic Net for Diagnosis of IgA Nephropathy: Statistical and Biological Viewpoints
998
Application of Spatial and Network Analysis to Evaluate Shelter Plan for Tsunami Evacuation
999
Application of spatial Besag, York and Mollie method in estimating interprovincial neck pain prevalence in the National Disease and Health Survey in Iran
1000
Application of spatial EOF and multivariate time series model for evaluating agricultural drought vulnerability in Korea
