بر اساس عنوان

1
Modeling of a bacterial and fungal biofilter applied to toluene abatement: Kinetic parameters estimation and model validation
2
Modeling of a Batch Catalytic Reactive Distillation Process Using a Multi-Scale Approach of Pore Diffusion and a Non-Equilibrium Rate Based Model
3
Modeling of a bead mill process for dispersion of coagulated nano particles
4
Modeling of a bioethanol combustion engine under different operating conditions
5
Modeling of a biomass high temperature steam gasifier integrated with assisted solar energy and a micro gas turbine
6
Modeling of a biphasic membrane reactor catalyzed by lipase immobilized in a hydrophilic/hydrophobic composite membrane
7
Modeling of a catalytic autothermal methane reformer for fuel cell applications Original Research Article
8
Modeling of a catalytic membrane reactor for CO removal from hydrogen streams – A theoretical study
9
Modeling of a cationic glucose-sensitive membrane with consideration of oxygen limitation
10
Modeling of a charge coupled device based optical tomographic instrumentation system for particle sizing
11
Modeling of a circulating fluidized bed for ammoxidation of propane to acrylonitrile
12
Modeling of a coal-fired slagging combustor: Development of a slag submodel
13
Modeling of a combined ion transport and porous membrane reactor for oxy-combustion
14
Modeling of a compact plate-fin reformer for methanol steam reforming in fuel cell systems
15
Modeling of a conceptual self-sustained liquid fuel vaporization – combustion system with radiative output using inert porous media
16
Modeling of a confinement bypass accident with CONSEN, a fast-running code for safety analyses in fusion reactors
17
Modeling of a continuous fluidized bed dryer using artificial neural networks
18
Modeling of a deformable manikin neck for multibody dynamic simulation
19
Modeling of a domestic frost-free refrigerator
20
Modeling of a Dynamic Magneto-Fluid Seal in the Presence of a Pressure Drop
21
Modeling of a flat plate membrane-distillation system for liquid desiccant regeneration in air-conditioning applications
22
Modeling of a flat-plate solar reactor. Degradation of formic acid by the photo-Fenton reaction
23
Modeling of a front wall fired utility boiler for different operating conditions Original Research Article
24
Modeling of a gas catalytic chemical reaction, taking into account the diffusion in the adsorbed phase
25
Modeling of a gas–liquid reactor in batch conditions. Study of the intermediate regime when part of the reaction occurs within the film and part within the bulk
26
Modeling of a generalized newtonian flow through channels with permeable wall
27
Modeling of a glucose sensitive composite membrane for closed-loop insulin delivery
28
Modeling of a green certificate market
29
Modeling of a hazelnut dryer assisted heat pump by using artificial neural networks
30
Modeling of a hazelnut dryer assisted heat pump by using artificial neural networks
31
Modeling of a heat-coupled catalytic reactor with co-current oxidation and conversion flows
32
Modeling of a helicon plasma source
33
Modeling of a hemispherical inductively coupled plasma using neural network
34
Modeling of a Human Circadian Mutation Yields Insights into Clock Regulation by PER2
35
Modeling of a hydronic ceiling system and its environment as energetic auditing tool
36
Modeling of a linear PM Machine including magnetic saturation and end effects: maximum force-to-current ratio
37
Modeling of a locking mechanism between two rough surfaces under cyclic loading
38
Modeling of a locking mechanism between two rough surfaces under cyclic loading
39
Modeling of a manufacturing cell design problem with fuzzy multi-objective parametric programming
40
Modeling of a mechanical cooling system with variable cooling capacity by using artificial neural network
41
Modeling of a membrane-based absorption heat pump
42
Modeling of a membraneless single-chamber microbial fuel cell with molasses as an energy source
43
Modeling of a micro auto-electrolytic cell for hydrogen production
44
Modeling of a microbial growth experiment with bioclogging in a two-dimensional saturated porous media flow field
45
Modeling of a microfluidic electrochemical cell for CO2 utilization and fuel production
46
Modeling of a miniaturized mass spectrometer with field emission electron source
47
Modeling of a multilane-multiple intersection based on queue theory and standard approach techniques
48
Modeling of a Multiply Jointed Voussoir Beam in the Centrifuge
49
Modeling of a New Percutaneous Orthopedic Implant System to Control the Post-surgery Osseointegration Process
50
Modeling of a new recuperative thermoelectric cycle for a tumble dryer
51
MODELING OF A NEW STRUCTURE OF PRECISION AIR CONDITIONING SYSTEM USING SECONDARY CONDENSER FOR RH REGULATION
52
Modeling of a new ZVS bi-directional dc-dc converter
53
Modeling of a non-isothermal FCC riser
54
Modeling of a nonlinear thermochemical energy storage by adsorption on zeolites
55
Modeling of a novel fish passage-way using coupled spatially varied flow
56
Modeling of a Novel Hybrid Drivetrain Based on Hybridized Ball Continuously Variable Transmission
57
Modeling of a Novel Magneto-electro-elastic Energy Harvesting System Subjected to Applied Electric Voltage with Simultaneous Use as an Electrical Actuator System
58
Modeling of a novel multi-stage bubble column scrubber for flue gas desulfurization
59
Modeling of a novel spool compressor with multiple vapor refrigerant injection ports
60
Modeling of a novel Trombe wall with PV cells
61
Modeling of a passive distributed vibration control device using a superposition technique
62
Modeling of a passive DMFC operating with neat methanol
63
Modeling of a pilot-scale fixed-bed reactor for iron-based Fischer–Tropsch synthesis: Two-dimensional approach for optimal tube diameter
64
Modeling of a PIN diode RF switch for reconfigurable antenna application
65
Modeling of a planar FEL amplifier with a sheet relativistic electron beam
66
Modeling of a planar FEL amplifier with a sheet relativistic electron beam
67
Modeling of a Power Conversion System with RELAP5-3D/K and Associated Application to the Feedwater Blowdown Licensing Analysis for the ABWR Containment Design
68
Modeling of a pressure modulated desalination system using bond graph methodology
69
Modeling of a pressure sensor based on an array of wedge emitters
70
Modeling of a Probabilistic Re-Entrant Line Bounded by Limited Operation Utilization Time
71
Modeling of a proton exchange membrane fuel cell based on the hybrid particle swarm optimization with Levenberg–Marquardt neural network
72
Modeling of a p-type resistive gas sensor in the presence of a reducing gas
73
Modeling of a quantum cascade laser operating at 1 THz
74
Modeling of a radial flow hollow fiber module and estimation of model parameters for aqueous multi-component mixture using numerical techniques
75
Modeling of a radial flow hollow fiber module and estimation of model parameters using numerical techniques
76
Modeling of a rail suspension system to investigate vertical vibration and effective parameters on it
77
Modeling of a residential house coupled with a dual source heat pump using TRNSYS software
78
Modeling of a rotor speed transient response with radial rubbing
79
Modeling of a saturated switched reluctance motor using an operating point analysis and the unsaturated torque equation
80
Modeling of a Schottky Diode in CMOS Process with a Flexible “Open-Through” On-Chip De-embedding Method
81
Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings
82
Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena
83
Modeling of a single-phase photovoltaic inverter
84
Modeling of a SiO rSi 001/ structure including step and terrace 2 configurations
85
Modeling of a smoldering cigarette
86
Modeling of a solar and heat pump sludge drying system
87
Modeling of a solar powered absorption cycle for Abu Dhabi
88
Modeling of a solid oxide fuel cell power plant using an ensemble of neural networks based on a combination of the adaptive particle swarm optimization and Levenberg–Marquardt algorithms
89
Modeling of a space cooling system with underground storage
90
Modeling of a space flexible probe–cone docking system based on the Kane method
91
Modeling of a space heating and cooling system with seasonal energy storage
92
Modeling of a spiral-wound module and estimation of model parameters using numerical techniques Original Research Article
93
Modeling of a split type air conditioner with integrated water heater
94
Modeling of a station in CVS and an approach to analyze distributions of time intervals of vehicles departed from the station
95
Modeling of a substrate thermomechanical behavior during plasma spraying
96
Modeling of a synchronous reluctance machine accounting for space harmonics in view of torque ripple minimization Original Research Article
97
Modeling of a teamʹs decision-making process
98
Modeling of a tempered martensitic hot work tool steel behavior in the presence of thermo-viscoplastic coupling
99
Modeling of a thermal energy storage system coupled with combined heat and power generation for the heating requirements of a University Campus
100
Modeling of a thermomechanical process chain for sheet steels
101
Modeling of a thermomechanical process chain for sheet steels
102
Modeling of a three-compartment membrane electrodialysis in H2SO4–(NH4)2SO4–NH3·H2O system
103
Modeling of a Three-Phase Industrial Batch Reactor Using a Hybrid First-Principles Neural-Network Model
104
Modeling of a transition to diffusionless dendritic growth in rapid solidification of a binary alloy
105
Modeling of a transmission line protection relaying scheme using Petri nets
106
Modeling of a transmission network protection system using Petri nets
107
Modeling of a Transpiring Wall Reactor for the Supercritical Water Oxidation Using Simple Flow Patterns: Comparison to Experimental Results
108
Modeling of a Tröger’s tweezer and its complexation properties
109
Modeling of a two-phase CO2-filled vertical borehole for geothermal heat pump applications
110
Modeling of a two-stage draw process
111
Modeling of a two-stage magnetic refrigerator with wavy-structure gadolinium heat exchangers
112
Modeling of a two-step solar hydrogen production plant
113
Modeling of a Vanadium Redox Flow Battery for power system dynamic studies
114
Modeling of a violaxanthin–chlorophyll b chromophore pair in its LHCII environment using CAM-B3LYP
115
Modeling of Abrasive Wear Behaviour of Natural Fiber (Rice Husk Ceramic) Epoxy Composite Using Response Surface Methodology.
116
Modeling of Accumulated Energy Ratio (AER) for Estimating Liquefaction Potential using Artificial Neural Network (ANN) and Gene Expression Programming (GEP) (using Data from Tabriz)
117
Modeling of ACL impingement against the intercondylar notch
118
Modeling of acoustic wave propagation in time-domain using the discontinuous Galerkin method – A comparison with measurements
119
Modeling of activated carbon preparation from Spanish anthracite based on ANFIS structure
120
Modeling of activated sludge plants treatment efficiency with PLSR: a process analytical case study
121
Modeling of active holonic control systems for intelligent buildings
122
Modeling of active transport systems
123
Modeling of adaptive composites including debonding
124
Modeling of Adaptive Load Balancing with Hybrid F/CDMA and Sectorization Schemes in Mobile Communication Networks
125
Modeling of adatom vibrational populations and recombination rates in exoergic reactions
126
Modeling of adiabatic moving-bed reactor for dehydrogenation of isobutane to isobutene Original Research Article
127
Modeling of adsorbent based hydrogen storage systems
128
Modeling of adsorption and phase diagrams for stepped surfaces: Transfer matrix approach
129
Modeling of adsorption equilibria in supercritical fluids
130
Modeling of adsorption heat pumps with heat regeneration
131
Modeling of adsorption in hydrophobic interaction chromatography systems using a preferential interaction quadratic isotherm
132
Modeling of adsorption isotherms and competitive adsorption breakthroughs of Nicotine/Pyridine removal from aqueous solution by activated Montmorillonite
133
Modeling of adsorption isotherms and kinetics of a tannery dye onto an activated carbon prepared from an agricultural by-product
134
Modeling of adsorption isotherms of water vapor on Tunisian olive leaves using statistical mechanical formulation
135
Modeling of adsorption of toxic chromium on natural and surface modified lightweight expanded clay aggregate (LECA)
136
Modeling of adsorption storage of hydrogen on activated carbons
137
Modeling of advanced alkaline electrolyzers: a system simulation approach
138
Modeling of Advanced High Strength Steels with the realistic microstructure–strength relationships
139
Modeling of aerated stirred tanks with shear-thinning power law liquids
140
MODELING OF AERATED UPFLOW FIXED BED REACTORS FOR NITRIFICATION
141
MODELING OF AERATED UPFLOW FIXED BED REACTORS FOR NITRIFICATION
142
Modeling of aerobic biodegradation of feces using sawdust as a matrix
143
Modeling of aerosol deposition of titania thin films
144
Modeling of aerosol dynamics along a vertical flat plate
145
Modeling of aerosol dynamics in a laminar flow reactor: A multicomponent 2-D bimodal approach
146
Modeling of aerosol dynamics with MADE: Cloud contributions
147
Modeling of aerosol formation during biomass combustion for various furnace and boiler types
148
Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates
149
Modeling of agglomeration inside a droplet with nanosuspensions in an acoustic field
150
Modeling of aging process for supersaturated solution treated of Al–3wt%Mg alloy
151
Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation
152
Modeling of Air Pollutants’ Dispersion by Means of CALMET/CALPUFF (Case Study: District 7 in Tehran city)
153
Modeling of air region height in the casting process for preparing UO2 kernels
154
Modeling of Air Relative Humidity Effect on Adhesion Force in Manipulation of Nano-Particles and its Application in AFM
155
Modeling of air sparging of VOC-contaminated soil columns
156
Modeling of airborne particle exposure and effectiveness of engineering control strategies
157
Modeling of air-gap membrane distillation process: A theoretical and experimental study
158
Modeling of Alcator C-Mod divertor baffling experiments
159
Modeling of aldopyranosyl ring puckering with MM3 (92)
160
Modeling of alkaline scale formation in falling film horizontal-tube multiple-effect distillers Original Research Article
161
Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice
162
Modeling of ALOS and COSMO-SkyMed satellite data at Mt Etna: Implications on relation between seismic activation of the Pernicana fault system and volcanic unrest
163
Modeling of alpha mass-efficiency curve
164
Modeling of alpha mass-efficiency curve
165
Modeling of altered layer formation during reactive ion etching of GaAs
166
Modeling of Alternative Pathways of Electron Transport to Photosystem I in Isolated Thylakoids
167
Modeling of altitude effects on AC flashover of polluted high voltage insulators
168
Modeling of aluminum alloy profile extrusion process using finite volume method
169
Modeling of aluminum alloy sheets based on new anisotropic yield functions
170
Modeling of amino acid nanofiltration by irreversible thermodynamics
171
Modeling of ammonia combustion at low pressure
172
Modeling of ammonia dry deposition to a pocosin landscape downwind of a large poultry facility
173
Modeling of Ammonia Emission in the Petrochemical Industry
174
Modeling of ammonium dinitramide (ADN) monopropellant combustion with coupled condensed and gas phase kinetics
175
Modeling of ammonium lactate recovery and impurity removal from simulated fermentation broth by nanofiltration
176
Modeling of ammonothermal growth of gallium nitride single crystals
177
Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors
178
Modeling of an Airlift Reactor with Floating Solids for Wastewater Treatment
179
Modeling of an anode-supported Ni-YSZNi-ScSZScSZ LSM-ScSZ multiple layers SOFC cell: Part II. Simulations and discussion
180
Modeling of an anode-supported Ni–YSZNi–ScSZScSZLSM–ScSZ multiple layers SOFC cell: Part I. Experiments, model development and validation
181
Modeling of an APU system based on MCFC
182
Modeling of an axial flow, spherical packed-bed reactor for naphtha reforming process in the presence of the catalyst deactivation
183
Modeling of an Eco-Epidemiological system Involving Various Epidemic Diseases with Optimal Harvesting
184
Modeling of an EHD corona flow in nitrogen gas using an asymmetric capacitor for propulsion
185
Modeling of an ejector refrigerating system operating in dimensioning and off-dimensioning conditions with the working fluids R142b and R600a
186
Modeling of an EMP conducted environment
187
Modeling of an EMP simulator using a 3-D FDTD code
188
Modeling of an FAU-type zeolite membrane reactor for the catalytic dehydrogenation of cyclohexane
189
Modeling of an ice-on-coil thermal energy storage system
190
Modeling of an Impinging Oxygen Jet on Molten Bath Surface in 150 t EAF Original Research Article
191
Modeling of an industrial double-roll crusher of a urea granulation circuit
192
Modeling of an industrial fixed bed reactor based on lumped kinetic models for hydrogenation of pyrolysis gasoline
193
Modeling of an Industrial Full-Scale Plant for Biological Treatment of Textile Wastewaters: Application of Neural Networks
194
Modeling of an Industrial Riser in the Fluid Catalytic Cracking Unit
195
Modeling of an insurance system and its large deviations analysis
196
Modeling of an integrated active feedback preamplifier in a 0.25 (mu)m CMOS technology at cryogenic temperatures
197
Modeling of an integrated fermentation/membrane extraction process for the production of 2-phenylethanol and 2-phenylethylacetate
198
Modeling of an integrated solar system
199
Modeling of an integrated two-stage biomass gasifier and solid oxide fuel cell system
200
Modeling of an Intelligent e-Consent System in a Healthcare Domain
201
Modeling of an intermittent solar absorption refrigeration system operating with ammonia–lithium nitrate mixture
202
Modeling of an inventory system with multi variate demand under volume flexibility and learning
203
Modeling of an inverted pendulum based on fuzzy clustering techniques
204
Modeling of an island grid
205
Modeling of an obstacle detection sensor for horizontal directional drilling (HDD) operations
206
Modeling of an oxygen-staged membrane wall gasifier: effects of secondary oxygen
207
Modeling of an RO water desalination unit using neural networks
208
Modeling of an Upper-Convected-Maxwell Fluid Hammer Phenomenon in Pipe System
209
Modeling of Anaerobic Digestion of Complex Substrates
210
Modeling of analog blocks by using standard hardware description language
211
Modeling of analytical peaks: Peaks properties and basic peak functions Original Research Article
212
Modeling of anchor bolt pullout in concrete based on a heterogeneous assumption
213
MODELING OF ANECHOIC CHAMBER USING A BEAM-TRACING TECHNIQUE
214
Modeling of anisotropic inelasticity in pearlitic steel at large strains due to deformation induced substructure evolution
215
Modeling of anisotropic plastic behavior of ferritic stainless steel sheet
216
Modeling of anisotropic plastic behavior of ferritic stainless steel sheet
217
Modeling of anisotropic softening phenomena: Application to soft biological tissues
218
Modeling of anisotropic tensile and cyclic viscoplastic behavior of a nickel-base directionally solidified superalloy
219
Modeling of annual oscillations and 1/f-noise of daily river discharges
220
Modeling of anodic dissolution of U–Pu–Zr ternary alloy in the molten LiCl–KCl electrolyte Original Research Article
221
Modeling of anomalous thermodynamic properties using lattice dynamics and inelastic neutron scattering
222
Modeling of aqueous amino acid and polypeptide solutions with PC-SAFT
223
Modeling of Aqueous BTEX Adsorption in Column and Multistage Adsorbers
224
Modeling of Aqueous Electrolyte Solutions with Perturbed-Chain Statistical Associated Fluid Theory
225
Modeling of arsenic immobilization by zero valent iron
226
Modeling of Artemisia sieberi Besser Habitat Distribution Using Maximum Entropy Method in Desert Rangelands
227
Modeling of arterial stenosis and its applications to blood diseases
228
Modeling of ash deposition in large-scale combustion facilities burning pulverized coal
229
Modeling of a-Si/poly-Si and a-Si/poly-Si/poly-Si stacked solar cells
230
Modeling of asphaltene and other heavy organic depositions
231
Modeling of asphaltene deposition in oil reservoirs during primary oil recovery
232
MODELING OF ASPHALTENE DEPOSITION IN PIPELINES
233
Modeling of asphaltene precipitation from n-alkane diluted heavy oils and bitumens using the PC-SAFT equation of state
234
Modeling of asphaltene precipitation utilizing Association Equation of State
235
Modeling of assisted cold start processes with anode catalytic hydrogen–oxygen reaction in proton exchange membrane fuel cell
236
Modeling of asymmetric membrane formation by a combination of dry/wet phase inversion processes Original Research Article
237
Modeling of asymmetric membrane formation by dry-casting method
238
Modeling of asymmetric redeposition distribution between inner and outer regions of the W-shaped divertor in JT-60U
239
Modeling of atmosphere stratification in containments of nuclear power plants using lumped-parameter code
240
Modeling of atmospheric temperature fluctuations by translations of oscillatory random processes with application to spacecraft atmospheric re-entry
241
Modeling of atmospheric wind speed sequence using a lognormal continuous stochastic equation
242
Modeling of ATP-mediated signal transduction and wave propagation in astrocytic cellular networks
243
Modeling of Austenite Decomposition in Low Si-Mn TRIP Steel During Cooling Original Research Article
244
Modeling of austenite decomposition in plain carbon steels during hot rolling
245
Modeling of autoignition and NO sensitization for the oxidation of IC engine surrogate fuels
246
Modeling of automotive drum brakes for squeal and parameter sensitivity analysis
247
Modeling of automotive fuel cell operation in driving cycles
248
Modeling of avionics blueprint architecture based on GSPN and LP
249
Modeling of axial and shear stresses in multilayer sandwich beams with stiff core layers
250
Modeling of axial bed-to-wall heat transfer in a CFB combustor with abrupt riser exit geometry
251
Modeling of Axial Flux Permanent-Magnet Machines
252
Modeling of axial motion of small droplets deposited on smooth and rough fiber surfaces
253
Modeling of axially and transversely injected precursor droplets into a plasma environment
254
Modeling of axially moving wire with damping: Eigenfunctions, orthogonality and applications in slurry wiresaws
255
Modeling of axis-symmetric steam plasma flow in a non-transferred torch Original Research Article
256
Modeling of backpulse filter cleaning: the small particle filter cake fragments
257
Modeling of backwash cleaning methods for RO membranes Original Research Article
258
Modeling of baking of thin layer of cake using the lumped reaction engineering approach (L-REA) Original Research Article
259
Modeling of Banks Bankruptcy in Iran (Multivariate Statistical Analysis)
260
Modeling of baryte batch grinding in a vibratory disc mill
261
Modeling of batch and semi-batch membrane filtration processes
262
Modeling of Be diffusion in GaAs layers grown by MBE
263
Modeling of Beams on Reinforced Granular Beds
264
Modeling of Benzene Adsorption in the Gas Phase on Single-Walled Carbon Nanotubes for Reducing Air Pollution
265
Modeling of benzocaine analog interactions with the D4S6 segment of NaV4.1 voltage-gated sodium channels Original Research Article
266
Modeling of beryllium sputtering and re-deposition in fusion reactor plasma facing components
267
Modeling of bi-equilibrium states in dielectric elastomer
268
Modeling of bimetallic Pt-based electrocatalyst on extended-surface support for advanced hydrogen compression and separation
269
Modeling of binary droplet collisions for application to inter-impingement sprays
270
Modeling of biodiesel production in algae cultivation with anaerobic digestion (ACAD)
271
Modeling of biodynamic responses distributed at the fingers and the palm of the human hand–arm system
272
Modeling of biological doses and mechanical effects on bone transduction
273
Modeling of biomanipulation in shallow, eutrophic lakes: An application to Lake Bleiswijkse Zoom, the Netherlands
274
Modeling of biomanipulation in shallow, eutrophic lakes: An application to Lake Bleiswijkse Zoom, the Netherlands
275
Modeling of biomass production by Spirulina platensis as function of phosphate concentrations and pH regimes
276
Modeling of bipolar HVDC links in the harmonic domain
277
Modeling of Bipolar Junction Transistor in FDTD Simulation of Printed Circuit Board
278
Modeling of blade sharpness and compression cut of biomaterials
279
Modeling of blast process using indenting method
280
Modeling of bleaching wave regime of UV laser polymerization of acrylates without initiators
281
Modeling of Blood Flow in a Constricted Porous Vessel Under Magnetic Environment: An Analytical Approach
282
Modeling of body mass index by Newtonʹs second law
283
Modeling of boiling flow in microchannels for nucleation characteristics and performance optimization
284
Modeling of bombardment-induced diffusion and segregation during the self-sputtering of Ga+ ions at SiO2/Si interfaces
285
Modeling of bond between near-surface mounted CFRP laminate strips and concrete
286
Modeling of bonding between steel rebar and concrete at elevated temperatures
287
Modeling of bone conduction of sound in the human head using hp-finite elements: Code design and verification
288
Modeling of bone formation and resorption mediated by parathyroid hormone: response to estrogen/PTH therapy
289
Modeling of boron carbide oxidation in steam
290
Modeling of boron diffusion in polysilicon-on-silicon structures using a rapid thermal anneal step for ultra-shallow junction formation
291
Modeling of boron diffusion in polysilicon-on-silicon structures using a rapid thermal anneal step for ultra-shallow junction formation
292
Modeling of bounded stochastic processes
293
Modeling of brake pad-disc interface with emphasis to dynamics and deformation of structures
294
Modeling of branching and gelation in living copolymerization of monomer and divinyl cross-linker using dynamic lattice liquid model (DLL) and Flory–Stockmayer model
295
Modeling of Branching Structures of Plants
296
Modeling of breakthrough curves of single and quaternary mixtures of ethanol, glucose, glycerol and acetic acid adsorption onto a microporous hyper-cross-linked resin
297
Modeling of brine outfall at the planning stage of desalination plants Original Research Article
298
Modeling of bromate formation by ozonation of surface waters in drinking water treatment
299
Modeling of Bubble Column Reactors: Progress and Limitations
300
Modeling of bubble plume design and oxygen transfer for reservoir restoration
301
Modeling of bubble size distribution in isothermal gas–liquid flows: Numerical assessment of population balance approaches
302
Modeling of bubble surface area flux in an industrial rougher column using artificial neural network and statistical techniques
303
Modeling of bubble-layer thickness for formulation of one-dimensional interfacial area transport equation in subcooled boiling two-phase flow
304
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces
305
Modeling of C/EBPα Mutant Acute Myeloid Leukemia Reveals a Common Expression Signature of Committed Myeloid Leukemia-Initiating Cells
306
Modeling of cable-moored floating breakwaters connected with hinges
307
Modeling of CaCO3 decomposition under CO2/H2O atmosphere in calcium looping processes
308
Modeling of Cadmium Removal on Lignite (Thar Coal) from Aqueous System
309
Modeling of cadmium salts rejection through a nanofiltration membrane: relationships between solute concentration and transport parameters
310
Modeling of cadmium(II) adsorption on kaolinite-based clays in the absence and presence of humic acid
311
Modeling of cancer virotherapy with recombinant measles viruses
312
Modeling of Capacitance and Sensitivity of a MEMS Pressure Sensor with Clamped Square Diaphragm
313
Modeling of Capacity Reservation and Supplier Selection Based on Option Contract
314
Modeling of capillary flow in shaped polymer fiber bundles
315
MODELING OF CARBON BLACK FILLED NATURAL RUBBER VULCANTZATES BY THE STANDARD TRIBOELASTTC SOLID
316
MODELING OF CARBON BLACK FILLED NATURAL RUBBER VULCANTZATES BY THE STANDARD TRIBOELASTTC SOLID
317
Modeling of carbon cycling and biogeochemical changes during injection and recovery of reclaimed water at Bolivar, South Australia
318
Modeling of carbon monoxide dispersion around the urban tunnel portals
319
Modeling of carbon nanotube clamping in tensile tests
320
Modeling of carbon sequestration in coal-beds: A variable saturated simulation
321
Modeling of carbon transport in the divertor and SOL of DIII-D during high performance plasma operation
322
Modeling of carbonate oil reservoirs in imbibition displacement with considering asphaltene deposition
323
Modeling of cardiac function of patients with acute myocardial infarction based on Type‑D personality: Mediating role of negative emotions
324
Modeling of Carrier-based Aircraft Ski Jump Take-off Based on Tensor
325
Modeling of cascade and sub-cascade formation at high PKA energies in irradiated fusion structural materials
326
Modeling of cascade damage interactions by Monte-Carlo method
327
Modeling of catalyst deactivation Original Research Article
328
Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes
329
Modeling of catalyst layer microstructural refinement and catalyst utilization in a PEM fuel cell
330
Modeling of catalytic coke formation in thermal cracking reactors
331
Modeling of catalytic coke formation in thermal cracking reactors
332
Modeling of catalytic gasification kinetics of coal char and carbon
333
Modeling of catalytic monolith reactor for reforming of hexadecane with exhaust gas
334
Modeling of catalytic reactor for oxidative coupling of methane using La2O3/CaO catalyst
335
Modeling of Catecholaminergic Polymorphic Ventricular Tachycardia With Patient-Specific Human-Induced Pluripotent Stem Cells
336
Modeling of cation diffusion in oxygen ion conductors using molecular dynamics
337
Modeling of Cd and Pb speciation in soil solutions by WinHumicV and NICA-Donnan model
338
Modeling of cell sorting and rare cell capture with microfabricated biodevices
339
Modeling of Cell/Dendrite Transition During Directional Solidification of Ti-Al Alloy Using Cellular Automaton Method Original Research Article
340
Modeling of central domestic water heater for buildings
341
Modeling of ceramic particles filled polymer–matrix nanocomposites
342
Modeling of CH4 combustion with NiO/NiAl2O4 in a 10 kWth CLC pilot plant
343
Modeling of Chain Conformations and Spatial Configurations
344
Modeling of chaotic motion of gyrostats in resistant environment on the base of dynamical systems with strange attractors
345
Modeling of characteristics of ionizing radiation detector based on AlGaAs–GaAs heterostructure
346
Modeling of characteristics of ionizing radiation detector based on AlGaAs–GaAs heterostructure
347
Modeling of charge neutralization by ionizer
348
Modeling of charge transfer processes to understand photophysical signatures: The case of Rhodamine 110
349
Modeling of chemical mechanical polishing process using FEM ، abductive network
350
Modeling of chemical reactions in afterburning for the reduction of N2O
351
Modeling of chemical reactor dynamics by nonlinear principal components
352
Modeling of chemical vapor infiltration process for fabrication of carbon–carbon composites by finite difference methods Original Research Article
353
Modeling of chloride diffusion in concrete containing low-calcium fly ash
354
Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions
355
Modeling of chloride diffusion in hetero-structured concretes by finite element method
356
Modeling of chloride diffusivity coupled with non-linear binding capacity in sound and cracked concrete
357
Modeling of chloride ion ingress in coastal concrete
358
Modeling of Chloride Ion Separation by Nanofiltration Using Machine Learning Techniques
359
Modeling of chloride transport coupled with enhanced moisture conductivity in concrete exposed to marine environment
360
Modeling of chlorine effect on floc forming and filamentous micro-organisms of activated sludges
361
Modeling of chromatographic separation process with Wiener-MLP representation
362
Modeling of Chromium Combustion in Incineration: Thermochemistry of Cr-C-H-Cl Combustion in Air and Selection of Key Reactions
363
Modeling of clarified tropical fruit juice deacidification by electrodialysis
364
Modeling of Class I Settling Tanks
365
Modeling of Class I Settling Tanks
366
Modeling of Climate Change Effects on Groundwater Resources: The Application of Dynamic Systems Approach
367
Modeling of Clostridium perfringens vegetative cell inactivation in beef-in-sauce products: A meta-analysis using mixed linear models
368
Modeling of cluster structure-dependent drag with Eulerian approach for circulating fluidized beds
369
Modeling of CO and NOx produced by vehicles in Mashhad, 2012
370
Modeling of CO dispersion from the stack of an Iranian cement Plant
371
Modeling of CO2 capture by three typical amine solutions in hollow fiber membrane contactors
372
Modeling of CO2 post-combustion capture using membrane contactors, comparison between one- and two-dimensional approaches
373
Modeling of CO2 release and the carbonate system in multiple-effect distillers Original Research Article
374
Modeling of CO2 solubility and carbamate concentration in DEA, MDEA and their mixtures using the Deshmukh–Mather model
375
Modeling of CO2 sorption on coal
376
Modeling of CO2-selective water gas shift membrane reactor for fuel cell
377
Modeling of coal breakage in a double-roll crusher considering the reagglomeration phenomena
378
Modeling of coal char gasification in coexistence of CO2 and H2O considering sharing of active sites
379
Modeling of coal combustion and NOx formation in a W-shaped boiler furnace
380
Modeling of coal combustion in a 25-MW FBC power plant
381
Modeling of coal gasification in an internally circulating fluidized bed reactor with draught tube
382
Modeling of Coalescence of Dispersed Surface Cracks. Part 1. Probabilistic Model for Crack Coalescence
383
Modeling of coalescence of dispersed surface cracks. Part 2. Simulation model for multiple fracture
384
Modeling of coaxial powder flow for the laser direct deposition process
385
Modeling of Collision Avoidance Protocols in Single-Channel Multihop Wireless Networks
386
Modeling of colloidal fouling in forward osmosis membrane: Effects of reverse draw solution permeation Original Research Article
387
Modeling of color values for nondestructive evaluation of maturity of mango Original Research Article
388
Modeling of combat operations
389
Modeling of combined effects of citral, linalool and β-pinene used against Saccharomyces cerevisiae in citrus-based beverages subjected to a mild heat treatment
390
Modeling of combined electroosmotic and capillary flow in microchannels Original Research Article
391
MODELING OF COMBINED NATURAL/THERMOCAPILLARY CONVECTION FLOWS IN GERMANIUM MELT AT HIGH TEMPERATURES
392
Modeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine
393
Modeling of combustion and ignition of solid-propellant ingredients
394
Modeling of compaction and overpressuring in sedimentary basins
395
Modeling of complex dynamical behaviours using a state representation technique based on a vector ARMA approach
396
Modeling of complex hydraulic fractures in naturally fractured formation
397
Modeling of complex premixed burner systems by using flamelet-generated manifolds
398
Modeling of complex protein structures
399
Modeling of compocasting process and fabrication of AZ91D magnesium alloy matrix composites
400
Modeling of composite coatings in plasma spraying
401
Modeling of composite fiber production with silica nanoparticles dispersed in polyethyleneoxide
402
Modeling of composite fibrous porous diffusion media
403
Modeling of composite fracture using cohesive zone and bridging models
404
Modeling of composite/concrete interface of RC beams strengthened with composite laminates
405
Modeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
406
Modeling of compression-induced splitting failure in heterogeneous brittle porous solids
407
Modeling of compressive failure in fiber reinforced composites
408
MODELING OF COMPRESSIVE STRENGTH OF METAKAOLIN BASED GEOPOLYMERS BY THE USE OF ARTIFICIAL NEURAL NETWORK
409
Modeling of Computerized Physician Order Entry with Decision Support System for Diabetic Patients
410
Modeling of concentrated aqueous solutions: Efficient implementation of Pitzer equations in geochemical and reactive transport models
411
Modeling of concentration polarization layer evolution and breakthrough concentrations in dead-end hyperfiltration
412
Modeling of concrete behavior under high strain rates with inertially retarded damage
413
MODELING OF CONCRETE CRACKING INDUCED BY STEEL EXPANSION
414
Modeling of concrete cracking—A hybrid technique of using displacement discontinuity element method and direct boundary element method
415
Modeling of condensation heat transfer for a PRHRS heat exchanger in a SMART-P plant Original Research Article
416
Modeling of condensation heat transfer of pure refrigerants in micro-fin tubes
417
Modeling of condensation heat transfer of refrigerant mixture in micro-fin tubes
418
Modeling of condensation in horizontal tubes Original Research Article
419
Modeling of Condensed Phase Combustion-Decomposition Reaction with Gas Generation
420
Modeling of Conducted Common Mode Perturbations in Variable-Speed Drive Systems
421
Modeling of conductive particle behavior in insulating fluids affected by DC electric fields
422
Modeling of conjugated heat transfer in a thick walled enclosure filled with nanofluid
423
Modeling of Conjunctive Two-Dimensional Surface-Three-Dimensional Subsurface Flows
424
Modeling of Conjunctive Two-Dimensional Surface-Three-Dimensional Subsurface Flows
425
Modeling of consciousness
426
Modeling of constituent redistribution in U–Pu–Zr metallic fuel
427
Modeling of constitutive relationship of Ti–25V–15Cr–0.2Si alloy during hot deformation process by fuzzy-neural network
428
Modeling of constitutive relationships and microstructural variables of Ti–6.62Al–5.14Sn–1.82Zr alloy during high temperature deformation
429
Modeling of Construction Cost of Villas in Oman
430
Modeling of Construction Noise for Environmental Impact Assessment
431
Modeling of contact tracing in social networks
432
Modeling of containment structures on high performance computers Original Research Article
433
Modeling of contaminant transport in soils considering the effects of micro- and macro-heterogeneity
434
Modeling of continuous drive friction welding of mild steel
435
Modeling of continuous dynamic recrystallization in commercial-purity aluminum
436
Modeling of continuous thermal processing of a non-Newtonian liquid food under diffusive laminar flow in a tubular system
437
Modeling of continuous time homogeneous Markov system with fixed size as elastic solid: the two-dimensional case
438
Modeling of continuously, directly analyzed biphasic reaction courses of ribulose 1,5-bisphosphate carboxylase/oxygenase
439
Modeling of controlled particle deposition onto electronically conducting surfaces
440
Modeling of convection heat transfer of supercritical carbon dioxide in a vertical tube at low Reynolds numbers using artificial neural network
441
Modeling of convection-dominated thermoporomechanics problems using incomplete interior penalty Galerkin method
442
Modeling of convective drying kinetic of Erythroxylu mminutifolium Griseb leaves
443
Modeling of convective heat transfer of a nanofluid in the developing region of tube flow with computational fluid dynamics
444
Modeling of cooking-emitted particle dispersion and deposition in a residential flat: A real room application
445
Modeling of copper fixed-bed biosorption from wastewater by Posidonia oceanica
446
Modeling of core flow in a gas–solids riser
447
Modeling of corium dispersion in DCH accidents Original Research Article
448
Modeling of corona under positive lightning surges
449
Modeling of Corroded FRP-Wrapped Reinforced Concrete Columns in Axial Compression
450
Modeling of corrosion fatigue in metals in an aggressive environment
451
Modeling of CorrosionFatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique
452
Modeling of corrosion-induced concrete cover cracking: A critical analysis
453
Modeling of corrugated laminates
454
Modeling of corrugated plate photocatalytic reactors and experimental validation
455
Modeling of cotunneling in quantum dot systems
456
Modeling of Coulomb Collisions in a Kinetic Description of the Electron Cyclotron Resonance Plasma Heating
457
Modeling of Coulomb interaction in parabolic quantum wires
458
Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore
459
Modeling of countercurrent shrinking-bed reactor in dilute-acid total-hydrolysis of lignocellulosic biomass
460
Modeling of coupled edge stochastic and core resonant magnetic field effects in diverted tokamaks
461
Modeling of coupled mass transport and chemical equilibrium in cement-solidified soil contaminated with heavy-metal ions
462
Modeling of coupled momentum, heat and solute transport during DNA hybridization in a microchannel in the presence of electro-osmotic effects and axial pressure gradients
463
Modeling of Coupled Shear Walls and Its Experimental Verification
464
Modeling of coupled spectral radiation, thermal and carrier transport in a silicon photovoltaic cell
465
Modeling of coupled structural systems by an energy spectral element method
466
Modeling of crack growth in ductile solids: a three-dimensional analysis
467
Modeling of crack growth in round bars and plane strain specimens
468
Modeling of crack growth through particulate clusters in brittle matrix by symmetric-Galerkin boundary element method
469
Modeling of Crack Initiation, Propagation and Coalescence in Uniaxial Compression
470
Modeling of crack propagation via an automatic adaptive mesh refinement based on modified superconvergent patch recovery technique
471
Modeling of crack tip high inertia zone in dynamic brittle fracture
472
Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique
473
Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique
474
Modeling of cracks in 3D piezoelectric finite media by weakly singular SGBEM
475
Modeling of Creep Behavior for Graphene Filled Vinyl Ester Nano-Composites
476
Modeling of creep behavior of Zircaloy-4 by considering metallurgical effect
477
Modeling of critical grain size for shifting plasticity enhancement to decrease by refining grain size
478
Modeling of critical lines and regions for binary and ternary mixtures using non-cubic and cubic equations of state
479
Modeling of critical phenomena for liquid/vapor–gas exothermic reaction on a single catalyst pellet
480
Modeling of crop loss caused by Puccinia striiformis f. sp. tritici in three common wheat cultivars in southern Iran
481
Modeling of cross flow ultrafiltration of stevia extract in a rectangular cell Original Research Article
482
Modeling of crossflow membrane separation processes under laminar flow conditions in tubular membrane Original Research Article
483
Modeling of cross-flow osmotic pressure controlled membrane separation processes under turbulent flow conditions
484
Modeling of cross-regulation in converters containing coupled inductors
485
Modeling of crude oil fouling in preheat exchangers of refinery distillation units
486
Modeling of cryogenic frictional behaviour of titanium alloys using Response Surface Methodology approach
487
Modeling of Cryopreservation of Engineered Tissues with One-Dimensional Geometry
488
Modeling of crystal size distributions (CSDs) in sills
489
Modeling of Cs+ diffusion and retention in the DI-A2 experiment (Mont Terri). Uncertainties in sorption and diffusion parameters
490
Modeling of Cu oxidation in an adiabatic fixed-bed reactor with N2 recycling
491
Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects
492
Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects
493
Modeling of current and future energy intensity and greenhouse gas emissions of the Lebanese industrial sector: assessment of mitigation options
494
Modeling of current and future energyintensity and greenhouse gas emissions ofthe Lebanese industrial sector: assessmentof mitigation options
495
Modeling of current–voltage and capacitance–voltage characteristics of pentacene and sol–gel derived SiO2 gate dielectric layer based on thin-film transistor
496
Modeling of current–voltage and capacitance–voltage characteristics of pentacene and sol–gel derived SiO2 gate dielectric layer based on thin-film transistor
497
Modeling of cutting forces as function of cutting parameters for face milling of satellite 6 using an artificial neural network
498
Modeling of CW laser diode irradiation of amorphous silicon films
499
Modeling of cyclic mobility in saturated cohesionless soils
500
Modeling of cyclohexene hydrogenation and dehydrogenation reactions in a continuous-flow microreactor
501
Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)
502
Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)
503
Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)
504
Modeling of daily pan evaporation in sub tropical climates using ANN, LS-SVR, Fuzzy Logic, and ANFIS
505
Modeling of dam break wave propagation in a partially ice-covered channel
506
Modeling of damage accumulation for Duffing-type systems under severe random excitations
507
MODELING OF DAMAGE EFFECT ON HEAT TRANSFER IN TIME-DEPENDENT NONHOMOGENEOUS SOLIDS
508
Modeling of damage evolution in soft-wood perpendicular to grain by means of a discrete element approach
509
Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites
510
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
511
Modeling of damage sensing in fiber composites using carbon nanotube networks
512
Modeling of dark characteristics of mercury cadmium telluride n+–p junctions
513
Modeling of dark current in mid-infrared quantum-well infrared photodetectors
514
Modeling of DBT biodegradation behaviors by resting cells of Gordonia sp. WQ-01 and its mutant in oil-water dispersions
515
Modeling of DC conductivity for ethylene vinyl acetate (EVA)/polyaniline conductive composites prepared through insitu polymerization of aniline in EVA matrix
516
Modeling of DC corona discharge along an electrically conductive flat plate with gas flow
517
Modeling of debonding failure for RC beams strengthened in shear with NSM FRP reinforcement
518
Modeling of decadal scale phosphorus retention in lake sediment under varying redox conditions
519
Modeling of decadal scale phosphorus retention in lake sediment under varying redox conditions
520
Modeling of decagonal quasicrystal lattice
521
Modeling of decentralized linear observer and tracker for a class of unknown interconnected large-scale sampled-data nonlinear systems with closed-loop decoupling property
522
Modeling of decision making in membership services as public goods problems
523
Modeling of deep traps in diamond detectors by means of β particles-induced conductivity measurements
524
Modeling of deep traps in diamond detectors by means of β particles-induced conductivity measurements
525
Modeling of deep-water renewal through cold convective plumes
526
MODELING OF DEFORMATION AND FRACTURE PROCESSES ON THE MESOLEVEL
527
MODELING OF DEFORMATION AND FRACTURE PROCESSES ON THE MESOLEVEL
528
Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression
529
Modeling of deformation behavior and texture evolution in magnesium alloy using the intermediate ϕ-model
530
Modeling of deformation behavior of SPD nanostructured CP titanium
531
Modeling of deformation induced anisotropy in free-end torsion
532
Modeling of delamination using a discretized cohesive zone and damage formulation
533
Modeling of dendritic solidification for optimizing casting and microstructure parameters
534
Modeling of dense gas–solid reactive mixtures applied to biomass pyrolysis in a fluidized bed
535
Modeling of density evolution of PLA under ultra-high pressure/temperature histories
536
Modeling of deoxy- and dideoxyaldohexopyranosyl ring puckering with MM3(92) Original Research Article
537
Modeling of Deposit Formation from "Waxy" Mixtures via Moving Boundary Formulation: Radial Heat Transfer under Static and Laminar Flow Conditions
538
Modeling of depuration of paralytic shellfish toxins in Chlamys nobilis and Perna viridis
539
Modeling of design iterations through simulation
540
Modeling of diamond liberation and damage for Debswana kimberlitic ores
541
Modeling of dielectric elastomers: Design of actuators and energy harvesting devices
542
MODELING OF DIELECTRIC MIXTURES CONTAINING CONDUCTING INCLUSIONS WITH STATISTICALLY DISTRIBUTED ASPECT RATIO
543
Modeling of Dielectric Relaxation for Lossy Materials at Microwave Frequencies using Polynomial Approaches
544
Modeling of dielectrophoretic force for moving dielectrophoresis electrodes
545
Modeling of Diffusion and Concurrent Metabolism in Cutaneous Tissue
546
Modeling of diffusion and reaction in monolithic catalysts for the methanol-to-propylene process
547
Modeling of diffusion behavior of humic acid and Nd in the presence of humic acid in compacted bentonite
548
Modeling of Diffusion Coefficients for Binary Gas at P=101.325 kPa using Particle Swarm Optimization Algorithm
549
Modeling of diffusion filtration combustion radiative burner
550
Modeling of diffusion in the presence of damage in polymer matrix composites
551
Modeling of diffusional phase transformation in multi-component systems with stoichiometric phases Original Research Article
552
Modeling of diffusive mass transport in micropores in cement based materials
553
Modeling of diffusivities in supercritical carbon dioxide using a linear solvation energy relationship
554
Modeling of diffusivity of tritium interacting with F centers in Li2O
555
Modeling of dimmable High Power LED illumination distribution using ANFIS on the isolated area
556
Modeling of dioctahedral 2:1 phyllosilicates by means of transferable empirical potentials
557
Modeling of diode configuration glow discharge impedance connected to pulse power supply
558
Modeling of direct beam extraction for a high-charge-state fusion driver
559
Modeling of direct beam extraction for a high-charge-state fusion driver
560
Modeling of Direct Contact Condensation in the Water-Saturated Zone of the Soil Exposed to Steam Injection
561
Modeling of direct contact membrane distillation process: Flux prediction of sodium sulfate and sodium chloride solutions Original Research Article
562
Modeling of directional solidification on an atomic scale
563
Modeling of direction-dependent Processes using Wiener models and neural networks with nonlinear output error structure
564
Modeling of discharge Coefficient of nonlinear weirs with QNET and SVM methods
565
Modeling of discontinuous dynamic recrystallization of a near-α titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method
566
Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging
567
Modeling of dislocation patterns of small- and high-angle grain boundaries in aluminum
568
Modeling of dislocation–grain boundary interactions in FCC metals
569
Modeling of disorder and X-ray diffraction in coal-based graphitic carbons Original Research Article
570
Modeling of dispersed-drug release from two-dimensional matrix tablets
571
Modeling of dispersion in a polymeric chromatographic monolith
572
Modeling of dispersion near roadways based on the vehicle-induced turbulence concept
573
Modeling of dissociation–recombination in nozzles using strongly non-equilibrium vibrational distributions Original Research Article
574
Modeling of dissolution-diffusion controlled drug release from planar polymeric systems with finite dissolution rate and arbitrary drug loading
575
Modeling of dissolved oxygen levels in the bottom waters of the Lower St. Lawrence Estuary: Coupling of benthic and pelagic processes
576
Modeling of distortion compensation ineffectivity in filters for nonactive power
577
Modeling of DNA fragmentation induced in human fibroblasts by 56Fe ions Original Research Article
578
Modeling of domain switching in ferroelectric ceramics: An example
579
Modeling of double action extrusion—A novel extrusion process for friction characterization at the billet–die bearing interface
580
Modeling of double-diffusive turbulent natural convection in porous media
581
Modeling of Dowel Jointed Rigid Airfield Pavement under Thermal Gradients and Dynamic Loads
582
Modeling of DR CALUX® bioassay response to screen PCDDs, PCDFs, and dioxin-like PCBs in farm milk from dairy herds
583
Modeling of drilling assisted by cryogenic cooling for higher efficiency
584
Modeling of droplet collision-induced breakup process
585
Modeling of droplet entrainment in co-current annular two-phase flow: A new approach
586
Modeling of droplet entrainment phenomena at a quench front
587
Modeling of droplet-gas interactions in spray atomization of Ta-2.5W alloy
588
Modeling of droplet-gas interactions in spray atomization of Ta-2.5W alloy
589
Modeling of drug delivery from erodible and non-erodible laminated planar devices into a finite external medium
590
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
591
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
592
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
593
Modeling of drug release from microemulsions: a peculiar case
594
Modeling of Drying Behaviors of Mushroom in a Solar Assisted Heat Pump Dryer by Using Artificial Neural Network
595
Modeling of Ductile Crack Growth in Reactor Pressure-Vessel Steels and Determination of JR Curves
596
Modeling of ductile crack propagation in expanded thin-walled 6063-T5 aluminum tubes
597
Modeling of ductile fracture using the dynamic punch test
598
Modeling of ductile fracture using the dynamic punch test
599
Modeling of ductile fracture using the dynamic punch test
600
Modeling of ductile fracture: Application of the mechanism-based concepts
601
Modeling of ductile fracture: Significance of void coalescence
602
Modeling of Dynamic Behavior and Estimation of Damage Incurred by Self-Centering Rocking Walls
603
Modeling of dynamic cutting forces and cutting characteristics based on the analyzed results of average forcefeed rate relationship in milling process
604
Modeling of dynamic microstructure evolution of EN AW-6082 alloy during hot forward extrusion
605
Modeling of dynamic operating behaviors in a liquid-feed direct methanol fuel cell
606
Modeling of dynamic response of SOL-divertor plasmas to an ELM crash
607
Modeling of dynamic systems : By Lennart Ljung and Torkel Glad. Prentice-Hall, Englewood Cliffs, NJ (1994). ISBN 0-13-597097-0
608
Modeling of dynamical processes in laser ablation
609
Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 1. Isothermal flows
610
Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion
611
Modeling of early age behavior of blast furnace slag concrete based on micro-physical properties
612
Modeling of Early-Age Creep of Shotcrete. I: Model and Model Parameters
613
Modeling of Early-Age Creep of Shotcrete. II: Application to Tunneling
614
Modeling of eating pathology and social reinforcement of the thin-ideal predict onset of bulimic symptoms
615
Modeling of eddy characteristic time in LES for calculating turbulent diffusion flame
616
Modeling of eddy current effects in an opposite-field septum
617
Modeling of eddy current effects in an opposite-field septum
618
Modeling of eddy current probe response for steam generator tubes
619
Modeling of eddy current probe response for steam generator tubes
620
Modeling of eddy current probe response for steam generator tubes Original Research Article
621
Modeling of effect of polarization on UV sky radiance during twilight Original Research Article
622
Modeling of effective elastic properties for polymer based carbon nanotube composites
623
Modeling of effective material properties of pyrolytic carbon with different texture degrees by homogenization method
624
Modeling of effective thermal conductivity and viscosity of carbon structured nanofluid
625
Modeling of efficient charge transfer materials of 4,6-di(thiophen-2-yl)pyrimidine derivatives: Quantum chemical investigations
626
Modeling of elastic and inelastic electron backscattering from surfaces
627
Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings
628
Modeling of elastic modulus evolution of cirrhotic human liver
629
Modeling of elastic thermal stresses in two materials joined by a graded layer
630
Modeling of Elastoplastic Crack Propagation Using Finite Element Method with Adaptive Mesh
631
Modeling of elastoplastic damage behavior of a claystone
632
Modeling of electrical and optical characteristics of near room-temperature CdS/ZnSe based NIR photodetectors
633
Modeling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II
634
Modeling of electrical properties of grain boundaries in n-conducting barium titanate ceramics as a function of temperature and dc-bias
635
Modeling of electric-field driven transport processes in microdevices for immunoassay
636
Modeling of electricity consumption in the Asian gaming and tourism center—Macao SAR, Peopleʹs Republic of China
637
Modeling of electrochemical intercalation of lithium into a LiMn2O4 electrode using Green function
638
Modeling of electrocrystallization for pulse current electroforming of nickel
639
Modeling of electrodialytic and dialytic removal of Cr, Cu and As from CCA-treated wood chips Original Research Article
640
Modeling of electrokinetic transport in silica nanofluidic channels Original Research Article
641
Modeling of electromagnetic absorption/scattering problems on curvilinear geometries using hp finite/infinite element method
642
Modeling of electromagnetic absorption/scattering problems using hp-adaptive finite elements Original Research Article
643
Modeling of electromagnetic fields in rectangular waveguides by coupled finite–infinite elements Original Research Article
644
Modeling of electromagnetic interference induced by electrostatic discharge (ESD) inside resonant structures
645
Modeling of electromagnetic separation of inclusions from molten metals
646
Modeling of electromagnetic separation of inclusions from molten metals
647
Modeling of electromagnetically coupled substrate noise in FLASH A/D converters
648
Modeling of electron cyclotron current drive in a tokamak with internal transport barrier
649
Modeling of Electron Heating and the Spatiotemporal Evolution of Emission in a Current-Sheet Plasma
650
Modeling of electron injection and transport in conjugated polymers
651
Modeling of electron mobility degradation by remote Coulomb scattering in ultrathin oxide MOSFETs
652
Modeling of electron temperature and DC bias voltage in an inductively-coupled Cl2/Ar plasma using neural network
653
Modeling of Electron Transfer through DNA Molecules
654
Modeling of electron-vibrational 4fn–4fn − 15d spectra in LiYF4:RE3+ crystals
655
Modeling of electroosmotic and electrophoretic mobilization in capillary and microchip isoelectric focusing
656
Modeling of Electrostatic Fields for Non-harmattan season in Northern Nigeria
657
Modeling of electrostatic recognition processes in the mammalian mitochondrial steroid hydroxylase system Original Research Article
658
Modeling of ELM events and their effect on impurity enrichment
659
Modeling of EMI response of damaged Mindlin–Herrmann rod
660
Modeling of EMI response of damaged Mindlin–Herrmann rod
661
Modeling of encapsulated cell systems
662
Modeling of end-use energy consumption in the residential sector: A review of modeling techniques
663
Modeling of energy absorption of short fiber composite considering interfacial properties of fiber/matrix
664
Modeling of energy bands in ultra-thin layer quantum nanostructures for solar cell applications
665
MODELING OF ENERGY CONSUMPTION OF CUCUMBER GREENHOUSES USING ARTIFICIAL NEURAL NETWORK AND ANFIS
666
Modeling of energy distribution inside greenhouse using concept of solar fraction with and without reflecting surface on north wall
667
Modeling of energy distributions for plasma implantation
668
Modeling of energy loss to the environment from a grinding mill. Part I: Motivation, literature survey and pilot plant measurements
669
Modeling of energy loss to the environment from a grinding mill. Part II: Modeling the overall heat transfer coefficient
670
Modeling of Energy Output in Poultry for Egg Production Farms using Artificial Neural Networks
671
Modeling of Energy Spilling in Substrate-Sufficient Cultures
672
Modeling of energy-services supply systems
673
Modeling of enhanced electrocaloric effect above the Curie temperature in relaxor ferroelectrics Original Research Article
674
Modeling of enhanced penetrant diffusion in nanoparticle-polymer composite membranes
675
Modeling of environmental aspects related to reverse osmosis desalination supply chain
676
Modeling of Environmental Factors Affecting the Prevalence of Zoonotic and Anthroponotic Cutaneous, and Zoonotic Visceral Leishmaniasis in Foci of Iran: A Remote Sensing and GIS Based Study
677
Modeling of environmental four-way data from air quality control
678
Modeling of Environmental Impact Assessment Based on RIAM and TOPSIS for Desalination and Operating Units
679
Modeling of Environmental Influences at the Signal Transmission by means of VDSL and PLC Technologies
680
Modeling of environmentally significant interfaces: Two case studies
681
Modeling of enzymatic conversion in the catalytic gel layer located on a membrane surface Original Research Article
682
Modeling of episodic particulate matter events using a 3-D air quality model with fine grid: Applications to a pair of cities in the US/Mexico border
683
Modeling of Epistemic Uncertainty in Reliability Analysis of Structures Using a Robust\\ Genetic Algorithm
684
Modeling of equiaxed growth in multicomponent alloys accounting for convection and for the globular/dendritic morphological transition
685
Modeling of equilibration times at high pressure for multicomponent vapor–liquid diffusional processes
686
Modeling of erosion and deposition patterns on C–W and W–Ta twin limiters exposed to the TEXTOR edge plasmas
687
Modeling of erosion combustion of energetic materials in high-enthalpy flows
688
Modeling of Erosion Wear of Sand Water Slurry Flow through Pipe Bend using CFD
689
Modeling of Escherichia coli growth and acetate formation under different operational conditions
690
Modeling of ESD-induced confined ignition of solid rocket propellants
691
Modeling of esterification in a batch reactor coupled with pervaporation for production of ethyl acetate catalyzed by ion exchange resins
692
Modeling of esterification of acetic acid with n-butanol in the presence of Zr(SO4)2·4H2O coupled pervaporation
693
Modeling of Ethylbenzene Dehydrogenation Membrane Reactor to Investigate the Potential Application of a Microporous Hydroxy Sodalite Membrane
694
Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy
695
Modeling of Evanescent Energy in Optical Fibers
696
MODELING OF EVAPORATION REDUCTION IN DRIP IRRIGATION SYSTEM
697
MODELING OF EVAPORATION REDUCTION IN DRIP IRRIGATION SYSTEM
698
Modeling of evoked potentials of electroencephalograms: An overview
699
Modeling of evolving damage in high temperature polymer matrix composites subjected to thermal oxidation
700
Modeling of excess properties and vapor–liquid equilibrium of the system H3PO4–H2O
701
Modeling of excess vacancy annihilation at different types of sinks Original Research Article
702
Modeling of existing cooling towers in ASPEN PLUS using an equilibrium stage method
703
Modeling of extinction in turbulent diffusion flames by the velocity-dissipation-composition PDF method
704
Modeling of extraction of dyes and their mixtures from aqueous solution using emulsion liquid membrane
705
Modeling of extraction of β-carotene from apricot bagasse using supercritical CO2 in packed bed extractor
706
Modeling of extremely low frequency magnetic field sources using multipole techniques
707
Modeling of extrinsic extended defect evolution in ion-implanted silicon upon thermal annealing
708
MODELING OF EXTRUSION PROCESS USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS
709
Modeling of facesheet crack growth in titanium–graphite hybrid laminates, Part I
710
Modeling of facesheet crack growth in titanium–graphite hybrid laminates. Part II: Experimental results
711
Modeling of facilitated transport of Cr(III) using (RNH3+HSO4−) ionic liquid and pseudo-emulsion hollow fiber strip dispersion (PEHFSD) technology
712
Modeling of failure in a high temperature black liquor gasifier refractory lining
713
Modeling of failure in composites by X-FEM and level sets within a multiscale framework Original Research Article
714
Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets
715
Modeling of failure near spot welds in lap-shear specimens based on a plane stress rigid inclusion analysis
716
Modeling of farnesyltransferase inhibition by some thiol and non-thiol peptidomimetic inhibitors using genetic neural networks and RDF approaches Original Research Article
717
Modeling of fast diffusion along grain boundaries in oxide ceramics
718
Modeling of fast phase transitions dynamics in metal target irradiated by pico- and femtosecond pulsed laser
719
Modeling of fatigue contact damages formation in rolling bodies and assessment of their lifetime
720
Modeling of fatigue crack growth from a notch
721
Modeling of fatigue crack growth in a pressure vessel steel Q345R
722
Modeling of fatigue crack growth in notched fiber metal laminates
723
Modeling of fatigue crack growth rate for ferritic steels in light water reactor environments Original Research Article
724
Modeling of fatigue crack growth threshold development for a microstructurally small crack
725
Modeling of fatigue crack propagation using dual boundary element method and Gaussian Monte Carlo method
726
Modeling of fatigue damage evolution on the basis of the kinetic concept of strength
727
Modeling of fatigue damage in a polymer matrix composite
728
Modeling of fatigue damage in a polymer matrix composite
729
Modeling of fatigue damage under superimposed high-cycle and low-cycle fatigue loading for a cast aluminum alloy
730
Modeling of fatigue wear of a two-layered elastic half-space in contact with periodic system of indenters
731
Modeling of fatigue-type seismic damage for nuclear power plants
732
Modeling of fault gouges with Cosserat Continuum Mechanics: Influence of thermal pressurization and chemical decomposition as coseismic weakening mechanisms
733
Modeling of fault reactivation and induced seismicity during hydraulic fracturing of shale-gas reservoirs
734
Modeling of Fe growth on Mo(1 1 0)
735
Modeling of female human body shapes for apparel design based on cross mean sets
736
Modeling of femtosecond ablation of aluminum film with single laser pulses
737
Modeling of femtosecond laser damage threshold on the two-layer metal films
738
Modeling of femtosecond laser-induced non-equilibrium deformation in metal films
739
Modeling of fermentative hydrogen production from sweet sorghum extract based on modified ADM1
740
Modeling of fermentative hydrogen production from the bacterium Ruminococcus albus: Definition of metabolism and kinetics during growth on glucose
741
Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure
742
Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure Original Research Article
743
Modeling of ferrite structure after deformation in the two-phase region
744
Modeling of ferroelectric domains in thin films and superlattices
745
Modeling of fiber pull-out in continuous fiber reinforced ceramic composites using finite element method and artificial neural networks
746
Modeling of filtration combustion in a packed bed
747
Modeling of filtration efficiency of nanoparticles in standard filter media
748
Modeling of financial data: Comparison of the truncated Lévy flight and the ARCH(1) and GARCH(1,1) processes
749
Modeling of financial incentives for investments in energy storage systems that promote the large-scale integration of wind energy
750
Modeling of financial supply chain
751
Modeling of fire spread through a forest fuel bed using a multiphase formulation
752
Modeling of fire-tube boilers
753
Modeling of fishbone-type carbon nanofibers with cone-helix structures Original Research Article
754
Modeling of fishbone-type carbon nanofibers: A theoretical study Original Research Article
755
Modeling of fixed bed column studies for removal of boron from geothermal water by selective chelating ion exchange resins Original Research Article
756
Modeling of fixed bed methanation reactor for syngas production: Operating window and performance characteristics
757
Modeling of Flap Endonuclease Interactions with DNA Substrate
758
Modeling of flash evaporation I: Formulation of the mathematical model
759
Modeling of flexural behavior of RC beams strengthened with mechanically fastened FRP strips
760
Modeling of flexure-hinge type lever mechanisms
761
Modeling of Flight of the Line Thrower Projectile
762
Modeling of flow and contaminant transport in coupled stream–aquifer systems
763
Modeling of flow and transport at the microscale Original Research Article
764
Modeling of flow behavior of Ti–6Al–4V alloy at elevated temperatures
765
Modeling of Flow Blockage in a Liquid Metal-Cooled Reactor Subassembly with a Subchannel Analysis Code
766
Modeling of flow dynamics in laminar aerosol flow tubes
767
Modeling of flow field and separation efficiency of a deoiling hydrocyclone using large eddy simulation
768
Modeling of flow field in polymer electrolyte membrane fuel cell
769
Modeling of flow in a polymeric chromatographic monolith
770
MODELING OF FLOW NUMBER OF ASPHALT MIXTURES USING A MULTI–KERNEL BASED SUPPORT VECTOR MACHINE APPROACH
771
Modeling of flow stress for magnesium alloy during hot deformation
772
Modeling of flow stress of 42CrMo steel under hot compression
773
Modeling of flow stress of bainitic and martensitic functionally graded steels under hot compression
774
Modeling of flowing film concentrators: Part 1. Water split behaviour
775
Modeling of flue gas desulphurization using dry additives
776
Modeling of fluid filtration and near-wellbore damage along a horizontal well
777
Modeling of fluid flow and heat transfer in a trough solar collector
778
Modeling of fluid multiphase equilibria in ternary systems of carbon dioxide as the near-critical solvent and two low-volatile solutes
779
Modeling of fluid phase equilibria with two thermodynamic theories: Non-random hydrogen bonding (NRHB) and statistical associating fluid theory (SAFT)
780
Modeling of fluidized bed membrane reactors for hydrogen production from steam methane reforming with Aspen Plus
781
Modeling of fluidized bed reactor for ethylene polymerization: effect of parameters on the single-pass ethylene conversion
782
Modeling of fluidized bed reactor of ethylene polymerization
783
Modeling of fluorinated tetraphenylporphyrin nanoparticles size design via rapid expansion of supercritical solution
784
Modeling of flux decline in crossflow microfiltration using neural networks: the case of phosphate removal
785
Modeling of food intake is moderated by salient psychological group membership
786
Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics
787
Modeling of formation of binary-phase hollow nanospheres from metallic solid nanospheres Original Research Article
788
Modeling of forming efficiency using genetic programming
789
Modeling of forward pump EDFA under pump power through MATLAB
790
Modeling of fouling phenomena in cross-flow ultrafiltration of suspensions containing suspended solids and oil droplets Original Research Article
791
Modeling of fouling reduction by secondary membranes
792
Modeling of frac flowback and produced water volume from Wattenberg oil and gas field
793
Modeling of fractional-order signals from their ramp cepstra
794
Modeling of frequency-dependent impedance of the third rail used in traction power systems
795
Modeling of fresh concrete flow
796
Modeling of fresh egg pasta characteristics for egg content and albumen to yolk ratio Original Research Article
797
Modeling of fretting wear evolution in rough circular contacts in partial slip
798
Modeling of fretting wear evolution in rough circular contacts in partial slip
799
Modeling of friction using spectral analysis
800
Modeling of frost growth and frost properties with airflow over a flat plate
801
MODELING OF FROST GROWTH ON A HORIZONTAL CIRCULAR CYLINDER UNDER NATURAL CONVECTION USING FRACTAL GEOMETRY ANALYSIS
802
Modeling of frost salt scaling
803
Modeling of frosting behavior on a cold plate
804
Modeling of FS2+ center at the magnesium oxide (1 0 0) hydrated surface
805
Modeling of fuel performance and metallic fission product release behavior during HTTR normal operating conditions
806
Modeling of fuel performance and metallic fission product release behavior during HTTR normal operating conditions Original Research Article
807
Modeling of fully-developed, liquid metal, thin film flows for fusion divertor applications
808
Modeling of functionally graded materials in dynamic analyses
809
Modeling of fuzzy control mechanism of Intersection by using Colored Petri Net in the VANET In order to reduce urban traffic congestion
810
Modeling of gamma-ray energy absorption buildup factors using neural network
811
Modeling of Gapped Power Bus Structures for Isolation Using Cavity Modes and Segmentation
812
Modeling of gas condensates properties using continuous distribution functions for the characterisation of the heavy fraction
813
Modeling of gas discharge plasmas: What can we learn from it?
814
Modeling of gas dynamics in a pulse combustion chamber to predict initial drying process parameters
815
Modeling of gas flow inside and outside the nozzle used in spray deposition
816
Modeling of Gas Hydrate Formation in the Presence of Inhibitors by Intelligent Systems
817
Modeling of gas solubilities in polymers with cubic equation of state
818
Modeling of Gas Solubility Data for HFCs–Lubricant Oil Binary Systems by Means of the SRK Equation of State
819
Modeling of gas solubility in brine
820
Modeling of gas transport in a microporous solid using a slice selection procedure: Application to the diffusion of benzene in ZSM5
821
Modeling of gas transport through a tubular solid oxide fuel cell and the porous anode layer
822
Modeling of gaseous adsorption of activated carbon bed by Wheeler–Jonas equation and estimation of breakthrough time using the extended equation
823
Modeling of gaseous radiant exchange with the smooth (reordered) band model
824
Modeling of gasification and fragmentation behavior of char particles having complicated structures
825
Modeling of Gas-Liquid Reactions in Ladle Metallurgy: Part I. Physical Modeling
826
Modeling of Gas-Liquid Reactions in Ladle Metallurgy: Part II. Numerical Simulation
827
Modeling of gas–liquid reactions in porous membrane microreactors
828
Modeling of Gauss elimination technique for multi-objective linear programming problem
829
Modeling of gene expression pattern alteration by p,p′-DDE and dieldrin in largemouth bass
830
Modeling of Generation and Growth of Non-Spherical Nanoparticles in a Co-Flow Flame
831
Modeling of generators and their controls in power system simulations using singular perturbations
832
Modeling of geochemical processes related to uranium mobilization in the groundwater of a uranium mine
833
Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools
834
Modeling of geometry effects in fretting fatigue
835
Modeling of geothermal energy production from stratigraphic reservoirs in the Great Basin
836
Modeling of germanium atomic-layer-epitaxy
837
Modeling of germination and growth of ochratoxigenic isolates of Aspergillus ochraceus as affected by water activity and temperature on a barley-based medium Original Research Article
838
Modeling of glancing incidence X-ray for depth profiling of thin layers
839
Modeling of glass sintering applied for the fabrication of porous glass bodies
840
Modeling of global biomass policies
841
Modeling of global particle balance in steady-state magnetic fusion devices – Analysis of the recent data from the TRIAM-1M tokamak
842
Modeling of global variations and ring shadowing in Saturnʹs ionosphere
843
Modeling of glucose isomerization in a fluidized bed immobilized enzyme bioreactor
844
Modeling of grabens extending above evaporites in Canyonlands National Park, Utah
845
Modeling of grain boundary barrier modulation in ZnO invisible thin film transistors
846
Modeling of grain boundary character reconstruction and predicting intergranular fracture susceptibility of textured and random polycrystalline materials
847
Modeling of grain growth in two dimensions Original Research Article
848
Modeling of grain growth mechanism by nickel silicide reactive grain boundary effect in metal-induced-lateralcrystallization
849
Modeling of grain pull-out forces in polycrystalline alumina
850
Modeling of grain pull-out forces in polycrystalline alumina
851
Modeling of grain refinement by cellular automata
852
Modeling of grain refinement in aluminum and copper subjected to cutting
853
Modeling of grain size effect on micro deformation behavior in micro-forming of pure copper
854
Modeling of graphene-based NEMS
855
Modeling of graphite oxidation in a stagnation-point flow field using detailed homogeneous and semiglobal heterogeneous mechanisms with comparisons to experiments
856
Modeling of graphitization kinetics during peritectic melting of tungsten carbide Original Research Article
857
Modeling of Greenhouse Gas Emissions in Dairy Farms
858
Modeling of greenhouse with PCM energy storage
859
Modeling of gross and net carbon dioxide exchange over a cool-temperate deciduous broad-leaved forest in Japan: Analysis of seasonal and interannual change
860
Modeling of ground grid and metallic structure currents in high voltage a.c. substations for the computation of electromagnetic fields
861
Modeling of Groundnut Shell Mercerization Process Using a Neuro-Fuzzy Technique
862
Modeling of Groundwater Artificial Recharge by Reactivating an Old Stream Bed
863
Modeling of Groundwater Flow over Sloping Beds in Response to Constant Recharge and Stream of Varying Water Level
864
Modeling of groundwater heads based on second-order difference time series models
865
Modeling of Groundwater Recharge by Rainwater Harvesting-Wadi Bayer (Case Study)
866
Modeling of Groundwater Resources Heavy Metals Concentration Using Soft Computing Methods: Application of Different Types of Artificial Neural Networks
867
Modeling of groundwater salinity on the Persian Gulf coastal plain By using linear moments and ANFIS-PSO
868
Modeling of growth and bacteriocin production by Leuconostoc mesenteroides E131
869
Modeling of Growth and Welfare Effects of Tax Reform in Iran: A Static Computable General Equilibrium Analysis
870
Modeling of Growth, Lactate Consumption, and Volatile Fatty Acid Production by Megasphaera elsdenii Cultivated in Minimal and Complex Media
871
Modeling of H2O adsorption-induced curvature of a metal/silicon nanocantilever
872
Modeling of Hammerstein-Wiener Processes with Special Input Test Signals
873
Modeling of hard part machining: effect of insert edge preparation in CBN cutting tools
874
Modeling of harmonic contributions to non-symmetrical RF plasmas
875
Modeling of Heart Excitation Patterns caused by a Local Inhomogeneity
876
Modeling of heat and mass transfer in accelerator targets during postulated accidents
877
Modeling of heat and mass transfer in accelerator targets during postulated accidents Original Research Article
878
Modeling of heat and mass transfer in parallel plate liquid-desiccant dehumidifiers
879
Modeling of heat and moisture transport by periodic ventilation of thin cotton fibrous media
880
Modeling of heat capacities of multi-walled carbon nanotubes by molecular structural mechanics
881
Modeling of Heat Conduction in Thermoplastic Honeycomb Core/Face Sheet Fusion Bonding
882
Modeling of heat deposition on the W/Cu movable limiter in HT-7
883
Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions
884
Modeling of Heat Losses Within Combustion Chamber of Diesel Engines
885
Modeling of heat transfer and differential diffusion in transported PDF methods
886
Modeling of heat transfer and energy analysis of potato slices and cylinders during solar drying
887
Modeling of heat transfer and evaporative mass losses during the cooking of beef patties using far-infrared radiation Original Research Article
888
Modeling of heat transfer and fluid flow characteristics of helicoidal double-pipe heat exchangers using Adaptive Neuro-Fuzzy Inference System (ANFIS)
889
Modeling of heat transfer and solidification in LIVE L3A experiment
890
Modeling of Heat Transfer and Solidification of Composite Roll
891
Modeling of Heat Transfer and Solidification Process of Spray Formed Billet
892
Modeling of heat transfer and turbulent flows inside industrial furnaces
893
Modeling of heat transfer coefficient in the furnace of CFB boilers by artificial neural network approach
894
Modeling of heat transfer during controlled cooling in hot rod rolling of carbon steels
895
Modeling of heat transfer enhancement by wire coil inserts using artificial neural network analysis
896
Modeling of heat transfer for flow across tube banks
897
Modeling of heat transfer in a turbulent flow around a heat-conducting plate with local regions of heating
898
Modeling of heat transfer in tanks during wine-making fermentation
899
Modeling of heat transfer in thermoplastic composite tape lay-up manufacturing
900
Modeling of heat transfer in turbulent gas–solid flow
901
Modeling of heat treatment processes for composite materials
902
Modeling of heating and cooling performance of counter flow type vortex tube by using artificial neural network
903
Modeling of heavy metal ion binding by phosphoric acid activated carbon
904
Modeling of heavy metal migration in sand/bentonite and the leachate pH effect
905
Modeling of He–defect interactions in ferritic alloys for fusion
906
Modeling of helical gear contact with tooth deflection
907
Modeling of helicopter-borne tunable TEA CO2 DIAL system employment for detection of methane and ammonia leakages
908
Modeling of helium bubble nucleation and growth in neutron irradiated boron doped RAFM steels
909
Modeling of heterogeneous chemical reactions caused in pyrolysis of biomass particles
910
Modeling of heterogeneous surfaces and characterization of porous materials by extending density functional theory for the case of amorphous solids
911
Modeling of heterojunction bipolar transistors at any temperature, pressure, strain and alloy composition
912
Modeling of hierarchical fuzzy systems
913
Modeling of high energy ion implantation based on splitting of the Boltzmann transport equation
914
Modeling of high power automotive batteries by the use of an automated test system
915
Modeling of high power laser interaction with APS deposited FeCrTiC
916
Modeling of high strength steel joints bonded with toughened adhesive for vehicle crash simulations
917
Modeling of high temperature- and diffusion-controlled die soldering in aluminum high pressure die casting
918
Modeling of High Temperature GaN Quantum Dot Infrared Photodetectors
919
Modeling of high temperature proton exchange membrane fuel cells with novel sulfonated polybenzimidazole membranes
920
Modeling of high temperature rheological behavior of AZ61 Mg-alloy using inverse method and ANN
921
Modeling of high velocity impact of spherical particles
922
Modeling of high-concentration gas-particle flow in a horizontal channel
923
Modeling of high-conversion binary copolymerization
924
Modeling of high-density compaction of granular materials by the Discrete Element Method
925
Modeling of higher order systems using artificial bee colony algorithm
926
Modeling of highly multimode waveguides for time-domain simulation
927
Modeling of high-pressure CO dissociation on Pt(1 0 0) and Pt(1 1 1)
928
Modeling of high-pressure vapor–liquid equilibrium in ionic liquids + gas systems using the PRSV equation of state
929
Modeling of high-temperature treatment of wood using the reaction engineering approach (REA)
930
Modeling of high-tension roll separator for separation of titanium bearing minerals
931
Modeling of highway stormwater runoff
932
Modeling of HMX/GAP pseudo-propellant combustion
933
Modeling of homogeneous mercury speciation using detailed chemical kinetics
934
Modeling of horizontal geoexchange systems for building heating and permafrost stabilization
935
Modeling of horizontal tube-bundle absorbers of absorption cooling systems
936
Modeling of Hot Deformation Behavior of 55SiMnMo Medium-Carbon Steel Original Research Article
937
Modeling of hot tearing formation during solidification
938
Modeling of hot-wall condensers for domestic refrigerators
939
Modeling of HPA and HPA linearization through a predistorter: Global Broadcasting Service applications
940
Modeling of HT and HTO release from irradiated lithium metazirconate
941
Modeling of human ghrelin receptor (hGHS-R1a) in its close state and validation by molecular docking Original Research Article
942
Modeling of Human Immunodeficiency Virus Modes of Transmission in Iran
943
Modeling of hurricane damage for Hawaii residential construction
944
Modeling of HXeBr in CO2 and Xe environments: Structure, energetics and vibrational spectra
945
Modeling of hybrid photovoltaic/wind/fuel cells power system
946
MODELING OF HYBRID RENEWABLE ENERGY SYSTEM: THE CASE STUDY OF ISTANBUL, TURKEY
947
Modeling of hybrid renewable energy systems
948
Modeling of hydrate formation conditions for CH4, C2H6, C3H8, N2, CO2 and their mixtures using the PRSV2 equation of state and obtaining the Kihara potential parameters for these components
949
Modeling of hydration kinetics in cement based materials considering the effects of curing temperature and applied pressure
950
Modeling of hydration reactions using neural networks to predict the average properties of cement paste
951
Modeling of hydrocarbon species in ECR methane plasmas
952
Modeling of hydrocarbons pyrolysis at low temperature. Automatic generation of free radicals mechanisms
953
Modeling of Hydrodynamic Chromatography for Colloid Migration in Fractured Rock
954
Modeling of hydrodynamic dispersion and two-phase flow in the complex variable boundary element method Original Research Article
955
Modeling of Hydrodynamic Factors for Management of Coastal Hazards, Case Study: Khamir Port, Persian Gulf, Iran
956
Modeling of hydrodynamics in microchannel reactor for Fischer–Tropsch synthesis
957
Modeling of hydroecological feedbacks predicts distinct classes of landscape pattern, process, and restoration potential in shallow aquatic ecosystems
958
Modeling of hydrogen embrittlement in single crystal Ni
959
Modeling of hydrogen explosion on a pressure swing adsorption facility
960
Modeling of hydrogen permeation for Ni–BZCY asymmetric membrane
961
Modeling of hydrogen permeation for Ni–ceramic proton conductor composite membrane with symmetric structure
962
Modeling of hydrogen production process from biomass using oxygen blown gasification
963
Modeling of hydrogen production with a stand-alone renewable hybrid power system
964
Modeling of hydrogen storage materials by density-functional calculations
965
Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy
966
Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy
967
Modeling of hydrogen upd isotherms
968
Modeling of hydrogen vacancy for dissociative adsorption of H2 on Pd (1 1 1) surface by a quantum chemical molecular dynamics
969
Modeling of hydrogen-assisted ductile crack propagation in metals and alloys
970
Modeling of hydrogen-rich gas production by plasma reforming of hydrocarbon fuels
971
Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower
972
Modeling of Hygrothermal Damage of Composite Materials
973
Modeling of hysteresis and power losses in transformer laminations
974
Modeling of ice crystal growth in laminar falling films for the production of pumpable ice slurries
975
Modeling of ice formation and condensation on a cryogenic surface
976
Modeling of ice formation in porous solids with regard to the description of frost damage
977
Modeling of Icing and Ice Shedding on Overhead Power Lines Based on Statistical Analysis of Meteorological Data
978
Modeling of icing events based on passive ice meter observations in Quebec
979
Modeling of Immobilized Cell Columns for Bioconversion and Wastewater Treatment
980
Modeling of immunoglobulin uptake by N,N,N′,N′-ethylenediaminetetramethylenephosphonic acid-modified zirconia particles under static and dynamic conditions
981
Modeling of Impact Damage of Sewing Machine Needle on Woven Fabric by Finite Element Method
982
Modeling of impact problems using an h-adaptive, explicit Lagrangian finite element method in three dimensions Original Research Article
983
Modeling of impact toughness of cold formed material by genetic programming
984
Modeling of impacts on composite structures
985
Modeling of Inclusion Growth and Dissolution in the Weld Pool
986
Modeling of Inclusion Removal in a Tundish
987
Modeling of Inclusion Removal in a Tundish
988
Modeling of inclusions with interphases in heterogeneous material using the infinite element method
989
Modeling of incompressible flow in short pipes with leaks
990
Modeling of Incubation Time for Austenite to Ferrite Phase Transformation Original Research Article
991
Modeling of in-cylinder pressure oscillations under knocking conditions: A general approach based on the damped wave equation
992
Modeling of Individual and Organizational Factors Affecting Traumatic Occupational Injuries Based on the Structural Equation Modeling: A Case Study in Large Construction Industries
993
Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran
994
Modeling of induction machines including stator and rotor slot effects
995
Modeling of industrial crystallizers for control and design purposes
996
Modeling of industrial energy consumption: An introduction and context
997
Modeling of industrial reactor for hydrotreating of vacuum gas oils Simultaneous hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions
998
Modeling of industrial reactor for hydrotreating of vacuum gas oils: Simultaneous hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions
999
Modeling of inelastic behavior of curved members with a mixed formulation beam element
1000
Modeling of inelastic impacts with the help of smooth-functions