<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal behavior and kinetics of the pyrolysis of the coal used in the COREX process
2
Thermal behavior and kinetics of the pyrolysis of the coal used in the COREX process
3
Thermal behavior and kinetics of the pyrolysis of the raw/steam exploded poplar wood sawdust
4
Thermal behavior and kinetics of the pyrolysis of the raw/steam exploded poplar wood sawdust
5
Thermal behavior and mechanical properties of physically crosslinked PVA/Gelatin hydrogels
6
Thermal behavior and molecular simulation of liquid crystalline polymers containing a pentamethylenic spacer
7
Thermal behavior and nucleation kinetics of 1,5-dimethyl-2-nitroimino-1, 3, 5-triazinane crystal Original Research Article
8
Thermal behavior and pyrolysis products of modified organo-layered silicates as intermediates for in situ polymerization
9
Thermal behavior and pyrolysis products of modified organo-layered silicates as intermediates for in situ polymerization
10
Thermal behavior and specific interaction in high glass transition temperature PMMA copolymer
11
Thermal behavior and the decomposition mechanism of electrochemically delithiated Li1−xNiO2
12
Thermal behavior and thermal decomposition study of porphyrin polymers containing different spacer groups
13
Thermal behavior during droplet-based deposition Original Research Article
14
Thermal behavior in a 180-deg turned channel with the perforation divider under rotational condition
15
Thermal behavior in solar air heater channel fitted with combined rib and delta-winglet
16
Thermal behavior of 1,3,3-trinitroazetidine
17
Thermal behavior of 1,4-bis(4-trimellitimido-2-trifluoromethyl phenoxy)benzene (DIDA) solvated with polar organic solvents and properties of DIDA-based poly(amide-imide)s
18
Thermal behavior of 1,7-diamino-1,7-dinitrimino-2,4,6-trinitro-2,4,6-triazaheptane
19
Thermal behavior of 3,4,5-triamino-1,2,4-triazole nitrate
20
Thermal behavior of a building with a slanted roof
21
Thermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles
22
Thermal behavior of a conductor submitted to skin effect
23
Thermal behavior of a copolymer PV/Th solar system in low flow rate conditions
24
Thermal Behavior of a Multi-layered Thin Slab Carrying Periodic Signals Under the Effect of the Dual-Phase-Lag Heat Conduction Model
25
Thermal Behavior of a Natural Sepiolite
26
THERMAL BEHAVIOR OF A NEW TYPE OF MULTI-LAYERED POROUS AIR HEATER
27
Thermal behavior of a novel micro-fuel cell-based methanol concentration sensor
28
Thermal behavior of a novel type see-through glazing system with integrated PV cells
29
Thermal behavior of a porous electric heater
30
Thermal behavior of a series of monomeric Ni(II) complexes with β-iminoketones
31
Thermal behavior of a small salinity-gradient solar pond with wall shading effect
32
Thermal Behavior of a Stagnant Gas Confined in a Horizontal Microchannel as Described by the Dual-Phase-Lag Heat Conduction Model
33
Thermal behavior of a zinc–chromium–sulfate lamellar double hydroxide revisited as a function of vacuum and moisture parameters Original Research Article
34
Thermal Behavior of Activated Carbon Cloths Heated by Joule Effect
35
Thermal behavior of Al/MoO3 xerogel nanocomposites
36
Thermal Behavior of Alkaline Lead Acetate, a Study of Thermogravimetry and Differential Scanning Calorimetry
37
Thermal behavior of aluminum fluoride trihydrate
38
Thermal behavior of aluminum powder and potassium perchlorate mixtures by DTA and TG
39
Thermal behavior of an electrical motor through a reduced model
40
Thermal behavior of Bi5Pb3O10.5
41
Thermal behavior of biodegraded lime wood Original Research Article
42
Thermal behavior of brominated and polybrominated compounds I: closed vessel conditions
43
Thermal behavior of brominated and polybrominated compounds II: Pyroproducts of brominated phenols as mechanistic tools
44
Thermal behavior of building material containing microencapsulated PCM
45
Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus
46
Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose
47
Thermal behavior of cement matrix with high-volume mineral admixtures at early hydration age
48
Thermal behavior of chromium electroplating sludge
49
Thermal behavior of cinnamyl diesters studied by the TG/FTIR/QMS in inert atmosphere
50
Thermal behavior of cinnamyl diesters studied by the TG/FTIR/QMS in inert atmosphere
51
Thermal behavior of coal-tar pitch modified with BMI resin
52
Thermal behavior of coal-tar pitch modified with BMI resin
53
Thermal behavior of corn fibers and corn fiber gums prepared in fiber processing to ethanol
54
Thermal behavior of corn fibers and corn fiber gums prepared in fiber processing to ethanol
55
Thermal behavior of Cu–Co bimetallic clusters
56
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
57
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
58
Thermal behavior of delithiated Li(Ni0.8Co0.15Al0.05)O2 and Li1.1(Ni1/3Co1/3Mn1/3)0.9O2 powders
59
Thermal Behavior of Double Skin Facade in Terms of Energy Consumption in the Climate of North of Iran-Rasht
60
Thermal behavior of Et4N10BH4 and (Et4N)2B20H18
61
Thermal behavior of ethylene/1octene copolymer fractions at high temperatures: Effect of hexyl branch content
62
Thermal behavior of floating gate oxide defects (moving bits)
63
Thermal behavior of fullerenes in different gas atmospheres Original Research Article
64
Thermal behavior of GeO2 doped PbO–B2O3–ZnO–Bi2O3 glasses
65
Thermal behavior of goethite during transformation to hematite
66
Thermal behavior of gum arabic in comparison with cashew gum
67
Thermal behavior of horizontally mixed surfaces on Mars
68
Thermal behavior of hydrogen atom intercalated between two layers of C150H30 graphite plane: MD simulation Original Research Article
69
Thermal behavior of isotactic polypropylene freeze-extracted from solutions with varying concentrations
70
Thermal behavior of K2MSi3O9·H2O with the structure of umbite (M = Sn) and kostylevite (M = Pb) minerals
71
Thermal behavior of lignocellulosic materials under aerobic/anaerobic environments
72
Thermal behavior of liquefied wood polymer composites (LWPC)
73
Thermal behavior of longitudinal convective–radiative porous fins with different section shapes and ceramic materials (SiC and Si3N4)
74
Thermal behavior of magnetically modalized poly(N-isopropylacrylamide)-chitosan based nanohydrogel
75
Thermal behavior of masonry walls in Istanbul
76
Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling
77
Thermal behavior of mixtures of bentonitic clay and saline solutions
78
thermal behavior of monocrystalline silicon solar cells: a numerical and experimental investigation on the module encapsulation materials
79
Thermal behavior of nano-silver clay in the application of handmade jewelry
80
Thermal behavior of native, washed and steam exploded lignocellulosic biomass samples
81
Thermal behavior of native, washed and steam exploded lignocellulosic biomass samples
82
Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion Original Research Article
83
Thermal behavior of Ni- and Cu-containing plasma electrolytic oxide coatings on titanium
84
Thermal behavior of nitrided TiO2/In2O3 by TG–DSC–MS combined with PulseTA
85
Thermal behavior of novel non-sonicated arsonolipid-containing liposomes Original Research Article
86
Thermal behavior of organotin(IV) triazolates: Molecular precursors for pure-phase, nanosized SnS/SnO2
87
Thermal behavior of overcharged nickel/metal hydride batteries
88
Thermal Behavior of Oxometalate (Mo, W)-Intercalated Layered Double Hydroxides: Study of the Grafting Phenomenon
89
Thermal behavior of pentaerythritol diazido dinitrate
90
Thermal Behavior of Perfect and Imperfect Contact Composite Slabs Under the Effect of the Hyperbolic Heat Conduction Model
91
Thermal behavior of phosphorus derivatives of hydrogenated cardanol
92
Thermal behavior of polarized Pd/D electrodes prepared by co-deposition
93
Thermal behavior of polyacetylacetonatozirconium (PAZ)
94
Thermal behavior of renewable diesel from sugar cane, biodiesel, fossil diesel and their blends
95
Thermal behavior of Si-doped fullerenes vs their structural stability at T = 0 K: A density functional study
96
Thermal behavior of silver-containing mesogenic cyanobiphenyl films
97
Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles
98
Thermal behavior of sol–gel derived phosphate ceramics Original Research Article
99
Thermal behavior of spiral fin-and-tube heat exchanger having fly ash deposit
100
Thermal behavior of SrSO4–SrCO3 and SrSO4–SrCO3–Al2O3 mixtures
101
Thermal behavior of Sterculia striata oil
102
Thermal behavior of substituted FeCo-based metallic glasses
103
Thermal behavior of supersolidus bronze powder compacts during heating by hollow cathode discharge
104
Thermal behavior of supersolidus bronze powder compacts during heating by hollow cathode discharge
105
Thermal behavior of surface plasmon resonance in dynamic suprastructure multilayer
106
Thermal behavior of syndiotactic E-1,2-poly(3-methyl-1,3-pentadiene)
107
Thermal behavior of tetrapyrrole derivatives and their mixed complexes
108
Thermal behavior of the amorphous precursors in the ZrO2–CrO1.5 system
109
Thermal behavior of the amorphous precursors of the HfO2–Fe2O3 system
110
Thermal behavior of the amorphous precursors of the ZrO2–SnO2 system
111
Thermal behavior of the epoxy and polyester powder coatings using thermogravimetry/differential thermal analysis coupled gas chromatography/mass spectrometry (TG/DTA–GC/MS) technique: identification of the degradation products
112
THERMAL BEHAVIOR OF THE INDIUM PARTICLES DISPERSED IN OIL
113
Thermal behavior of the KSbMoO6 ionic conductive ceramic
114
Thermal behavior of the KSbMoO6 ionic conductive ceramic
115
Thermal behavior of the LHCD launchers in Tore Supra
116
Thermal behavior of the nonstoichiometric lithium niobate powders synthesized via a combustion method
117
Thermal behavior of the phenol–Pd–ACC system Original Research Article
118
Thermal behavior of the roughened Cu(110) surface
119
Thermal behavior of the saccharinates of K+, Na+, Rb+, Cs+ and NH4+: structural inferences
120
Thermal behavior of the YAG precursor prepared by sol–gel combustion process
121
Thermal behavior of Ti-precursor sols for porous TiO2 thin films
122
Thermal Behavior of Up to Down Vertical Flame Using Iraqi (LPG) As Fuel
123
Thermal behavior of vanadocene
124
Thermal behavior of vanadyl complexes with Schiff bases derived from trans-N,N′-bis(salicylidene)-1,2-cyclohexadiamine (t-Salcn)
125
Thermal behavior of various zinc cyclo-phosphates
126
THERMAL BEHAVIOR OF WATER FLOWING THROUGH PACKED BED SUBJECTED TO WALL HEAT FLUX
127
Thermal behavior of Zn and Cd complexes intercalated into γ-zirconium phosphate: Synthesis and physical–chemical characterization
128
Thermal Behavior of α-Alkylated Oligothiophenes
129
Thermal behavior, FT-IR spectroscopy and water durability of Li_2O–PbO–ZnO–P_2O_5 glasses
130
Thermal behavior, microstructure and protein quality of squid fillets dried by far-infrared assisted heat pump drying
131
Thermal behavior, microstructure, phase transformation, and crystal growth kinetics of nano-scale Fe3+-doped TiO2 xerogel powders
132
Thermal behaviors and grafting process of LDH/benzene derivative hybrid systems
133
Thermal behaviors of Al-based amorphous alloys bearing nanocrystalline In particles Original Research Article
134
Thermal behaviors of concrete and steel bridges after slab replacements with GFRP honeycomb sandwich panels
135
Thermal behaviors of doped polyaniline
136
Thermal behaviors of intrinsic polyaniline and its derivatives
137
Thermal behaviors of lithium in and on the two layers of C150H30 graphite plane: MD simulation Original Research Article
138
Thermal behaviors of lithium-ion cells during overcharge
139
Thermal behaviors of mechanically activated pyrites by thermogravimetry (TG)
140
Thermal behaviors of Ni-MH batteries using a novel impedance spectroscopy
141
Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method
142
Thermal behaviour and catalytic properties towards propene combustion of zirconia modified by different first row transition metals
143
Thermal behaviour and catalytic properties towards propene combustion of zirconia modified by different first row transition metals
144
Thermal Behaviour and Improved Properties of SBR and SBR/Natural Bitumen Modified Bitumens
145
Thermal behaviour and interactions of cassava starch filled with glycerol plasticized polyvinyl alcohol blends
146
Thermal behaviour and kinetic study for woody biomass torrefaction and torrefied biomass pyrolysis by TGA
147
Thermal behaviour and kinetics of alga Polysiphonia elongata biomass during pyrolysis
148
Thermal behaviour and kinetics of coal/biomass blends during co-combustion
149
Thermal behaviour and reactivity of green petroleum cokes used as additives in metallurgical cokemaking
150
Thermal behaviour and structural properties of surfactant—Picrate compounds: The effect of the ammonium headgroup number
151
Thermal behaviour and superheating temperature of Kaolinite from molecular dynamics
152
Thermal behaviour and transport properties of liquid crystalline polymers: Phase organization in a thermotropic polyester
153
Thermal behaviour and ventilation efficiency of a low-cost passive solar energy efficient house
154
Thermal behaviour during the pyrolysis of low rank perhydrous coals
155
Thermal behaviour modelling of tapered optical fibres for scanning near-field microscopy
156
Thermal behaviour modelling of tapered optical fibres for scanning near-field microscopy
157
Thermal behaviour of a direct-current traction motor driving a railway train
158
Thermal behaviour of a heated building under random weather condition in Warsaw
159
Thermal behaviour of a series of poly[B-(methylamino)borazine] for the preparation of boron nitride fibers
160
Thermal behaviour of a zeolitic tuff
161
Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers
162
Thermal behaviour of adobe constructions
163
Thermal behaviour of alumina precursor obtained by the aluminium sulphate–urea reaction in boiling aqueous solution
164
Thermal behaviour of aluminas with different morphologies
165
Thermal behaviour of aluminas with different morphologies
166
Thermal behaviour of an eighteenth-century Athenian dwelling
167
Thermal behaviour of arsenic oxides (As2O5 and As2O3) and the influence of reducing agents (glucose and activated carbon)
168
Thermal behaviour of CANDU type fuel rods during steady state and transient operating conditions
169
Thermal behaviour of carbonaceous aerosol from a continental background site
170
Thermal behaviour of cesium implanted in cubic zirconia
171
Thermal behaviour of chlorine in nuclear graphite at a microscopic scale
172
Thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned solid wastes with calcium hydroxide
173
Thermal behaviour of clay mixtures with bauxite residue for the production of heavy-clay ceramics
174
Thermal behaviour of clays for traditional ceramics with soda–lime–silica waste glass admixture
175
Thermal behaviour of closed wet cooling towers for use with chilled ceilings
176
Thermal behaviour of coal/biomass blends during co-pyrolysis
177
Thermal behaviour of CorSirWrSi multilayers under high intensity excimer laser pulses
178
Thermal behaviour of CorSirWrSi multilayers under high intensity excimer laser pulses
179
Thermal behaviour of CorSirWrSi multilayers under rapid thermal annealing
180
Thermal behaviour of CpCuPEt3 in gas phase and Cu thin films processing
181
Thermal behaviour of crystal and domain structure of LSGMn-05 anode material for SOFC
182
Thermal behaviour of Cu–Mg–Mn and Ni–Mg–Mn layered double hydroxides and characterization of formed oxides
183
Thermal behaviour of CuO doped phase-stabilised ammonium nitrate
184
Thermal behaviour of d-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale
185
Thermal behaviour of front-end multi-chip modules
186
Thermal behaviour of front-end multi-chip modules
187
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
188
Thermal behaviour of geothermal wells using mud and air–water mixtures as drilling fluids
189
Thermal behaviour of hard nanocomposite coatings within the W–Si–N system in oxidant and protective atmospheres
190
Thermal behaviour of helium-implanted spinel single crystals
191
Thermal behaviour of high-temperature superconducting fault current limiters: Application to microlimiters Original Research Article
192
Thermal behaviour of hydrated lysozyme in the presence of sucrose and trehalose by EINS
193
Thermal behaviour of hydrogen in Zircaloy corrosion layers
194
Thermal behaviour of induction motors under different speeds
195
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
196
Thermal behaviour of integrated solar collector/storage unit with 65 °C phase change material
197
Thermal behaviour of interactive mechanically ventilated double glazed façade: Non-dimensional analysis
198
Thermal behaviour of La0.8Sr0.2Fe1−xGaxO3−δ (x = 0 or x = 0.3)
199
Thermal behaviour of lignocellulosic material in the presence of phosphoric acid. Influence of the acid content in the initial solution
200
Thermal behaviour of low and high molecular weight paraffin waxes used for designing phase change materials
201
Thermal behaviour of lyophilized egg yolk and egg yolk fractions Original Research Article
202
Thermal behaviour of magnesium-containing fluorapatite
203
Thermal behaviour of malonic acid, sodium malonate and its compounds with some bivalent transition metal ions
204
Thermal behaviour of mandelic acid, sodium mandelate and its compounds with some bivalent transition metal ions
205
Thermal behaviour of mechanochemically synthesized nanocrystalline CuS
206
Thermal behaviour of medical grade silicone oils
207
Thermal behaviour of mixed alumina–silica gels obtained from alkoxides: Phase formation and morphology of powders
208
Thermal behaviour of mixed ligand Co(II), Ni(II) and Cu(II) complexes containing terephthalate ligands
209
Thermal behaviour of NaBH4-sodalites with alumosilicate framework: Influence of cage water content and the surrounding conditions
210
Thermal behaviour of nickel/metal hydride batteries during charge and discharge
211
Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: Experimental, modelling and parametric studies
212
Thermal behaviour of oil contaminated residues from metal cutting
213
Thermal behaviour of Pd40Cu30Ni10P20 bulk metallic glass Original Research Article
214
Thermal behaviour of phase-change slurries incorporating hydrated hydrophilic polymeric particles
215
Thermal behaviour of plasma-sprayed Mo coating on cast-iron substrate
216
Thermal behaviour of poly(acryloyloxybenzoic acid)/nylon 6 blends
217
Thermal behaviour of poly(methacrylic acid)/poly(N-vinyl-2-pyrrolidone) complexes
218
Thermal behaviour of polycrystalline [Ba(H2O)3](ClO4)2 and [Ba(NH3)4](ClO4)2
219
Thermal behaviour of polyoxocarbosilane shells in Fe-based (core)–polyoxocarbosilane (shell) nanocomposites
220
Thermal behaviour of pure and binary Fe(NO3)3·9H2O and (NH4)6Mo7O24·4H2O systems
221
Thermal behaviour of pyrope at 1000 and 1100 °C: mechanism of Fe2+ oxidation and decomposition model
222
Thermal behaviour of redeposited layer under high heat flux exposure
223
Thermal behaviour of rollers during the rolling process
224
Thermal behaviour of solar air heater with compound parabolic concentrator
225
Thermal behaviour of some rhodium(II) cycloalkanocarboxylate complexes
226
Thermal behaviour of some spiro benzodiazepine derivatives
227
Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers Original Research Article
228
Thermal behaviour of succinic acid, sodium succinate and its compounds with some bivalent transition metal ions
229
Thermal behaviour of the consumable electrode in the vacuum arc remelting process
230
Thermal behaviour of the nitrated AFm phase Ca4Al2(OH)12(NO3)2 • 4H2O and structure determination of the intermediate hydrate Ca4Al2(OH)12(NO3)2 • 2H2O
231
Thermal behaviour of titanium seleno-telluride Ti5Ch8 in Ar and N2 atmospheres
232
Thermal behaviour of ultra-thin Co overlayers on rutile TiO2(1 0 0) surface
233
Thermal behaviour of unsaturated polyester resins + poly(3-octylthiophene) blends
234
Thermal behaviour of xenon in zirconium carbide at high temperature: Role of residual zirconia and free carbon
235
Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass
236
Thermal behaviour of α-hydroxyisobutyric acid, sodium α-hydroxyisobutyrate and its compounds with some bivalent transition metal ions
237
Thermal behaviour of β-anhydrite CaSO4 to 1,263 K
238
Thermal behaviour, phase transition and molecular motions in [Co(NH3)6](NO3)2
239
THERMAL BENDING ANALYSIS OF COMPOSITE LAMINATED CYLINDRICAL SHELLS USING A REFINED FIRST-ORDER THEORY
240
Thermal bending analysis of laminated orthotropic plates by the generalized differential quadrature method
241
Thermal benefits of city parks
242
Thermal biology in insect-parasite interactions
243
Thermal biology, population fluctuations and implications of temperature extremes for the management of two globally significant insect pests
244
Thermal bleaching of optical absorption and photoluminescence spectra of γ-irradiated CaF2:Dy:Pb:Na single crystals
245
Thermal blob convection in spherical shells
246
Thermal blob size as determined by the intrinsic viscosity
247
Thermal bonding of microfluidic devices: Factors that affect interfacial strength of similar and dissimilar cyclic olefin copolymers
248
Thermal Bonding of Polymeric Capillary Electrophoresis Microdevices in Water
249
Thermal bosonisation in the sine-Gordon and massive Thirring models Original Research Article
250
Thermal bottomonium suppression at RHIC and LHC
251
Thermal Boundary Condition Effects on Forced Convection Heat Transfer
252
Thermal Boundary Condition Effects on Forced Convection Heat Transfer
253
Thermal boundary conditions for thermal lattice Boltzmann simulations
254
Thermal boundary conditions of local thermal non-equilibrium model for convection heat transfer in porous media
255
Thermal boundary resistance at the graphene–graphene interface estimated by molecular dynamics simulations
256
Thermal boundary resistance of nanocomposites
257
Thermal box-barrier for a direct measurement in high temperature environment
258
Thermal breakage of window glass in room fires conditions – Analysis of some important parameters
259
Thermal breakdown in solid dielectrics: A new approach
260
Thermal breakdown of calcium carbonate and constraints on its use as a biomarker
261
Thermal breakthrough analysis for determination of energy equilibrium data in a fluidized bed
262
Thermal bremsstrahlung photons probing the nuclear caloric curve
263
Thermal bremsstrahlung probing the thermodynamical state of multifragmenting systems Original Research Article
264
Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics
265
Thermal buckling analysis of cross-ply laminated composite beams with general boundary conditions
266
Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties
267
Thermal buckling analysis of functionally graded rectangular nanoplates based on nonlocal third-order shear deformation theory
268
THERMAL BUCKLING ANALYSIS OF INHOMOGENEOUS RECTANGULAR PLATE DUE TO UNIFORM HEAT SUPPLY
269
Thermal buckling analysis of moderately thick functionally graded annular sector plates
270
Thermal Buckling Analysis of Porous Conical Shell on Elastic Foundation
271
Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory
272
Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models
273
Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams
274
Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams
275
Thermal buckling and postbuckling analysis of a laminated composite beam with embedded SMA actuators
276
Thermal buckling and postbuckling analysis of a laminated composite beam with embedded SMA actuators
277
Thermal buckling and postbuckling analysis of functionally graded annular plates with temperature-dependent material properties
278
Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates
279
Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation
280
Thermal buckling and progressive ovalization of pipes: experiences at the TTS sodium test facility and their analysis Original Research Article
281
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model
282
Thermal buckling and vibration behavior of multi-layer rectangular viscoelastic sandwich plates
283
Thermal buckling behavior of composite laminated plates
284
Thermal buckling behavior of cross-ply hybrid composite laminates with inclined crack
285
Thermal Buckling Behavior of Hybrid-Composite Angle-Ply Laminated Plates with an Inclined Crack
286
THERMAL BUCKLING FOR LOCAL DELAMINATION NEAR THE SURFACE OF LAMINATED CYLINDRICAL SHELLS AND DELAMINATED GROWTH
287
Thermal Buckling Graded Beams of Functionally
288
Thermal buckling load optimization of angle-ply laminated cylindrical shells
289
Thermal buckling load optimization of laminated composite plates
290
Thermal buckling load optimization of laminated skew plates
291
Thermal buckling of a simply supported moderately thick rectangular FGM plate
292
Thermal buckling of angle-ply laminated composite and sandwich plates according to a global higher-order deformation theory
293
Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory
294
Thermal buckling of cross-ply laminated composite shallow shells according to a global higher-order deformation theory
295
Thermal buckling of FGM shells resting on a two-parameter elastic foundation
296
Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory
297
THERMAL BUCKLING OF FUNCTIONALLY GRADED CYLINDRICAL SHELL
298
Thermal buckling of functionally graded plates according to a 2D higher-order deformation theory
299
THERMAL BUCKLING OF FUNCTIONALLY GRADED PLATES BASED ON HIGHER ORDER THEORY
300
Thermal buckling of functionally graded plates using a local Kriging meshless method
301
Thermal buckling of functionally graded rectangular plates subjected to partial heating
302
Thermal buckling of functionally graded rectangular plates subjected to partial heating
303
Thermal buckling of functionally graded skew and trapezoidal plates with different boundary conditions using the element-free Galerkin method
304
Thermal buckling of hybrid angle-ply laminated composite plates with a hole
305
Thermal buckling of hybrid laminated composite plates with a hole
306
THERMAL BUCKLING OF IMPERFECT CYLINDRICAL SHELLS
307
Thermal Buckling of Imperfect Functionally Graded Cylindrical Shells Based on the Wan-Donnell Model
308
Thermal buckling of imperfect functionally graded plates
309
Thermal buckling of initially compressed single-walled carbon nanotubes by molecular dynamics simulation Original Research Article
310
Thermal buckling of laminated cross-ply oval cylindrical shells
311
Thermal Buckling of Multi-Walled Carbon Nanotubes Based on a Rigorous van der Waals Interaction
312
Thermal buckling of rectangular plates
313
Thermal buckling of shear deformable temperature dependent circular/annular FGM plates
314
Thermal buckling of shear-deformable composite laminated plates by the spline finite strip method Original Research Article
315
Thermal buckling of simply supported functionally graded skew plates
316
Thermal Buckling of Simply Supported Piezoelectric FGM Cylindrical Shells
317
Thermal buckling of various types of FGM sandwich plates
318
Thermal buckling optimization of composite laminates by evolution strategies
319
Thermal buckling predictions of three types of high-order theories for the heterogeneous orthotropic plates, using the new version of DQM
320
Thermal buckling response of all-edge clamped rectangular plates with symmetric angle-ply lamination
321
Thermal buckling response of shear flexible laminated anisotropic plates using a three-node isoparametric element
322
Thermal buffering effect of alpine boulder field microhabitats in Australia: Implications for habitat management and conservation
323
Thermal building behaviour in summer: long-term data evaluation using simplified models
324
Thermal building simulation and computer generation of nodal models
325
Thermal bump removal of a crystal monochromator by designing an optimal shape
326
Thermal bump removal of a crystal monochromator by designing an optimal shape
327
Thermal burn and electrical injuries among electric utility workers, 1995–2004
328
Thermal burn of the pharynx and larynx after swallowing hot milk
329
Thermal burns with injury to the intestine in a congenital hernia sac
330
Thermal calculation for high-pressure contact metamorphism: application to eclogite formation in the Sebadani area, the Sambagawa belt, SW Japan
331
Thermal calibrations of hypervelocity capture in aerogel using magnetic iron oxide particles
332
Thermal calorimetric detector for atomic hydrogen and deuterium beam measurements
333
Thermal calorimetric detector for atomic hydrogen and deuterium beam measurements
334
Thermal catalytic cracking of buriti oil (Mauritia flexuosa L.) over LaSBA-15 mesoporous materials
335
Thermal catalytic cracking of naphtha over multi wall carbon nanotube catalysts
336
Thermal catalytic cracking of naphtha over multi wall carbon nanotube catalysts
337
Thermal C-glycosylation of d-glucal with trimethylsilyl cyanide
338
Thermal challenge problem: Summary Original Research Article
339
Thermal change during formation process of indium-tin-oxide transparent conductive films
340
Thermal changes and cure depths associated with a high intensity light activation unit
341
Thermal changes in clay products from alluvial deposits of the Indo–Gangetic plains
342
Thermal Changes in Root Surface of Primary Teeth During Root Canal Treatment With Diode Lasers: An In Vitro Study
343
Thermal Changes of Root Surface of Anterior Primary Teeth in Pulpectomy with Er:YAG Laser
344
Thermal characterisation of a tungsten magnetoresistive heat switch Original Research Article
345
Thermal characterisation of ceramic/metal joining techniques for fusion applications using X-ray tomography
346
Thermal characterisation of corn–lentil extruded snacks
347
Thermal characterisation of embedded heat spreading layers in rectangular heat-generating electronic modules
348
Thermal characterisation of gelatin extracted from yellowfin tuna skin and commercial mammalian gelatin
349
Thermal characterisation of microalgae under slow pyrolysis conditions
350
Thermal characterisation of microalgae under slow pyrolysis conditions
351
Thermal Characterisation of Poly(Methyl Methacrylate) Filled with Barium Titanate as Denture Base Material
352
Thermal characterisation of red clay from the Northern Region of Rio de Janeiro State, Brazil using an open photoacoustic cell, in relation to structural changes on firing
353
Thermal characterisation of the products of wastewater sludge pyrolysis
354
Thermal characterisation of the products of wastewater sludge pyrolysis
355
Thermal characteristics and kinetics of crude oils and SARA fractions
356
Thermal characteristics during hydrogen fueling process of type IV cylinder
357
Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem
358
Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts
359
Thermal characteristics in round tube fitted with serrated twisted tape
360
Thermal characteristics of a direct heat exchange system between granules with phase change material and air
361
Thermal characteristics of a double-glazed external wall system with roll screen in cooling season
362
Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications
363
Thermal characteristics of a high heat flux micro-evaporator
364
Thermal characteristics of a meta-aramid and cellulose insulated transformer at loads beyond nameplate
365
Thermal characteristics of a personal environment module task air conditioning system: an experimental study
366
Thermal characteristics of a premixed impinging circular laminar-flame jet with induced swirl
367
Thermal characteristics of a resurfaced condenser and evaporator closed two-phase thermosyphon
368
Thermal characteristics of a solar tank with aerogel surface insulation
369
Thermal characteristics of Agaricus bisporus mushroom: freezing point, glass transition, and maximal-freeze-concentration condition
370
Thermal characteristics of Al2O3–MgO and Al2O3–spinel castables for steel ladles
371
Thermal characteristics of an N2O catalytic igniter with metal foam for hybrid rocket motors
372
Thermal characteristics of an underground cold-water reservoir: Analytical and experimental studies
373
Thermal characteristics of combined thermoelectric generator and refrigeration cycle
374
Thermal characteristics of composite sandwich structures for machine tool moving body applications
375
Thermal characteristics of conduction cooled 600 kJ HTS SMES system Original Research Article
376
Thermal characteristics of electroosmotic flow in a wavy-wall microtube
377
Thermal characteristics of fatty acid copper(II) carboxylate complexes with nicotinamide and diethylnicotinamide ligands
378
Thermal characteristics of flaxseed (Linum usitatissimum L.) proteins
379
Thermal characteristics of freeze-dried camel milk and its major components
380
Thermal characteristics of high voltage whole-solid-insulated polymeric ZnO surge arrester
381
Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber
382
Thermal characteristics of humic and hymatomelanic acids of lake sapropels of the ob river right and left banks
383
Thermal characteristics of inclined plate impinged by underexpanded sonic jet
384
Thermal characteristics of induction heating in cold crucible used for directional solidification
385
Thermal characteristics of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as a phase change material for effective utilization of urban waste heat
386
Thermal characteristics of manganese (II) nitrate hexahydrate as a phase change material for cooling systems
387
Thermal characteristics of Ni–Fe–Ga–Mn and Ni–Fe–Ga–Co ferromagnetic shape memory alloys
388
Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes
389
Thermal characteristics of polyurethane foams incorporated with phase change materials
390
Thermal characteristics of porphyrin entrapped sol–gels during exposure to toxic gases
391
Thermal characteristics of quantum-cascade lasers by micro-probe optical spectroscopy
392
Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves
393
Thermal characteristics of solid–solid phase transitions in long-chain dialkyl ammonium salts
394
Thermal characteristics of the Main Himalaya Thrust and the Indian lower crust with implications for crustal rheology and partial melting in the Himalaya orogen
395
Thermal characteristics of turbulent rib-grooved channel flows
396
Thermal characteristics, chemical composition and polyphenol contents of date-pits powder Original Research Article
397
Thermal characteristics, Raman spectra and structural properties of new tellurite glasses within the Bi2O3–TiO2–TeO2 system
398
Thermal characterization and detailed kinetic analysis of Cassava starch thermo-oxidative degradation
399
Thermal characterization and kinetic analysis of non-isothermal decomposition process of Bauxite red mud. Estimation of density distribution function of the apparent activation energy
400
Thermal characterization and phase behavior of cornstarch studied by differential scanning calorimetry Original Research Article
401
Thermal characterization and physicochemical properties of Fe2O3–Mn2O3/Al2O3 system
402
Thermal characterization during dehydration of nitrifying and denitrifying microbiological mud encapsulated in silica gel
403
Thermal characterization in a circular tube fitted with inclined horseshoe baffles
404
Thermal characterization of a bridge-link carbon nanotubes array used as a thermal adhesive
405
Thermal characterization of a montmorillonite, modified with polyethylene-glycols (PEG1500 and PEG4000), by in situ HT-XRD and FT IR: Formation of a high-temperature phase
406
Thermal characterization of a Ni-based superalloy
407
Thermal characterization of a vinylidene fluoride-trifluorethylene (75–25) (%mol) copolymer film
408
Thermal Characterization of Agar Encapsulated in TiO2 Sol–Gel
409
Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes
410
Thermal characterization of an epoxy-based underfill material for flip chip packaging
411
Thermal characterization of chicken fat dry fractionation process Original Research Article
412
Thermal characterization of compact electronic systems: a portable PC as a study case
413
Thermal characterization of Cu60ZrxTi40−x metallic glasses (x=15, 20, 22, 25, 30)
414
Thermal characterization of CVD diamond film by photoacoustic method
415
Thermal Characterization of Eicosane/Graphite Nano-Composite-Based Phase Change Material
416
Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity
417
Thermal characterization of foam–cane (Quseab) as an insulant material
418
Thermal characterization of glasses prepared from simulated compositions of lunar soil JSC-1A
419
Thermal characterization of liquids and pastes using the flash technique
420
Thermal characterization of magnetically aligned carbonyl iron/agar composites
421
Thermal characterization of materials at high pressures
422
Thermal characterization of methylene blue intercalated montmorillonites by photoacoustic technique
423
Thermal characterization of mustard straw and stalk in nitrogen at different heating rates
424
Thermal characterization of new fire-insulating materials from industrial inorganic TiO2 wastes
425
Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage
426
Thermal characterization of oil extracted from ethylene–propylene–diene terpolymer residues (EPDM-r)
427
Thermal characterization of organically modified montmorillonite
428
Thermal characterization of overmolded underfill materials for stacked chip scale packages
429
Thermal characterization of piezoelectric and non-piezoelectric Lead Meta-Niobate
430
Thermal characterization of PMR polyimides
431
Thermal characterization of polymer matrix composites containing microencapsulated paraffin in solid or liquid state
432
Thermal characterization of porous carbon foam—convection in parallel flow
433
Thermal characterization of porous graphitic foam – Convection in impinging flow
434
Thermal Characterization of Power Devices by Scanning Thermal Microscopy Techniques
435
Thermal Characterization of Power Devices by Scanning Thermal Microscopy Techniques
436
Thermal characterization of screen printed conductive pastes for RFID antennas
437
Thermal characterization of Se100−xSnx (x = 4, 6 and 8) chalcogenide glasses using differential scanning calorimeter
438
Thermal characterization of shrouded plate fin array on an LED backlight panel
439
Thermal characterization of softwood lignin modification by termite Coptotermes formosanus (Shiraki)
440
Thermal characterization of some new xanthine derivatives
441
Thermal characterization of the antiviral drug UC-781 and stability of its glass
442
Thermal characterization of the quercetin and rutin flavonoids
443
Thermal characterization of thermally conductive underfill for a flip-chip package using novel temperature sensing technique
444
Thermal characterization of titania-modified alumina-supported palladium and catalytic properties for methane combustion
445
Thermal characterization of titanium hydride in thermal oxidation process
446
Thermal characterization of Titanʹs tholins by simultaneous TG–MS, DTA, DSC analysis
447
Thermal characterization of tropical biomass feedstocks
448
Thermal characterization of turbulent flow in a channel with isosceles triangular ribs
449
Thermal characterization of Ugandaʹs Acacia hockii, Combretum molle, Eucalyptus grandis and Terminalia glaucescens for gasification
450
Thermal characterization, combustion and kinetics of different origin crude oils
451
Thermal characterization, melting behaviors, dynamic mechanical properties, and morphology in the polymorphism of syndiotactic polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)
452
Thermal charging of metal nanoparticles
453
Thermal chemical synthesis of nanostructured chromium carbide cermets
454
Thermal chemical synthesis of nanostructured chromium carbide cermets
455
Thermal chemical vapor deposition (T-CVD) growth of carbon nanotubes on different metallic underlayers
456
Thermal chemical vapor deposition grown graphene heat spreader for thermal management of hot spots Original Research Article
457
Thermal chemical vapor deposition of fluorocarbon polymer thin films in a hot filament reactor
458
Thermal chemiluminescence from γ-irradiated polytetrafluoroethylene and its emission mechanism: Investigation by multichannel Fourier-transform luminescence spectroscopy
459
Thermal chemiluminescence from γ-irradiated polytetrafluoroethylene and its emission mechanism: Kinetic analysis and bond dissociation energy of fluoroperoxide group
460
Thermal chemiluminescence spectroscopy of amino acids and its salts using a multichannel Fourier-transform spectrometer
461
Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces I. Clean and hydrogen-covered
462
Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces II. Effect of coadsorbed oxygen
463
Thermal chemistry of toluene and benzene on Si(1 0 0)2×1 and modified surfaces
464
Thermal chlorofluorination of propyne and propadiene
465
Thermal chlorofluorination of propyne and propadiene II
466
Thermal cis–trans conversion in thiophene oligomers
467
Thermal cis–trans isomerization of triazo-benzene
468
Thermal cis–trans isomerization of triazo-benzene
469
Thermal coating erosion in a simulated Martian landing environment
470
Thermal co-decomposition of silver acetylacetonate and tin(II) hexafluoroacetylacetonate: Formation of carbonaceous Ag/AgxSn(x = 4 and 6.7)/SnO2 composites
471
Thermal coefficient of InP-based quantum dot laser from cavity-mode measurements
472
Thermal collapse of SAPO-34 molecular sieve towards a perfect glass
473
Thermal collapse of snowflake fractals
474
Thermal combustion theory for a two-center unbranched chain reaction under the influence of light or ionizing radiation
475
Thermal comfort analysis of a low temperature waste energy recovery system: SIECHP
476
Thermal comfort and building design in the tropical climates
477
Thermal comfort and building energy consumption implications – A review
478
Thermal comfort and clothing insulation of resting tent occupants at high altitude
479
Thermal Comfort and Energy Analysis in Ceramic Tile
480
Thermal comfort and energy consumption in a UK educational building
481
Thermal comfort and energy consumption in modern versus traditional buildings in Cameroon: A questionnaire-based statistical study
482
Thermal comfort and energy consumption of the radiant ceiling panel system.: Comparison with the conventional all-air system
483
Thermal comfort and energy performance of a low-mixing ceiling-mounted personalized ventilator system
484
Thermal comfort and energy saving in a vehicle compartment using a localized air-conditioning system
485
Thermal comfort and energy saving of a personalized PFCU air-conditioning system
486
Thermal comfort and IAQ assessment of under-floor air distribution system integrated with personalized ventilation in hot and humid climate
487
Thermal comfort and IAQ characteristics of naturally/mechanically ventilated and air-conditioned bedrooms in a hot and humid climate
488
Thermal comfort and indoor air quality in the lecture room with 4-way cassette air-conditioner and mixing ventilation system
489
Thermal comfort and occupant responses during summer in a low to middle income housing development in South Australia
490
Thermal comfort and productivity - Evaluation of workplace environment in a task conditioned office
491
Thermal comfort and psychological adaptation as a guide for designing urban spaces
492
Thermal comfort and the integrated design of homes for older people with dementia
493
Thermal comfort and use of thermostats in Finnish homes and offices
494
Thermal comfort and workplace occupant satisfaction—Results of field studies in German low energy office buildings
495
Thermal comfort assessment and application of radiant cooling: A case study
496
Thermal Comfort Assessment and Heat-Related Illnesses among Sellers in Periodic Local Markets: A Case Study in Hot and Dry Climate of Iran
497
Thermal Comfort Assessment and Optimization of Environmental Factors by Using Taguchi Method
498
Thermal comfort assessment in civil aircraft cabins
499
Thermal comfort assessment in semi-outdoor environments: Application to comfort study in stadia
500
Thermal Comfort Assessment: A Case Study at Malaysian Automotive Industry
501
THERMAL COMFORT AT THE TURBINE ROOM IN THE POWER STATION: A REVIEW
502
Thermal comfort conditions of shaded outdoor spaces in hot and humid climate of Malaysia
503
Thermal comfort control on multi-room fan coil unit system using LEE-based fuzzy logic
504
Thermal comfort design of traditional houses in hot dry region of Algeria
505
Thermal comfort enhancement by using a ceiling fan
506
Thermal comfort evaluation in kindergarten: PMV and PPD measurement through datalogger and questionnaire
507
Thermal comfort evaluation of naturally ventilated public housing in Singapore
508
Thermal comfort evaluation with virtual manikin methods
509
Thermal Comfort Features of Antalya, Future Projections Using Climate Model Data and Its Effects on Tourism
510
Thermal comfort field study in undergraduate laboratories – An analysis of occupant perceptions
511
Thermal comfort for free-running buildings
512
Thermal comfort for naturally ventilated houses in Indonesia
513
Thermal comfort implications of urbanization in a warm-humid city: the Colombo Metropolitan Region (CMR), Sri Lanka
514
Thermal comfort in a room with exposed roof using evaporative cooling in Delhi
515
Thermal comfort in air-conditioned mosques in the dry desert climate
516
Thermal comfort in buildings with split air-conditioners in hot-humid area of China
517
Thermal comfort in chilled ceiling and displacement ventilation environments: vertical radiant temperature asymmetry effects
518
Thermal comfort in classrooms in the tropics
519
Thermal comfort in forested urban canyons of low building density. An assessment for the city of Mendoza, Argentina
520
Thermal comfort in hospitals – A literature review
521
Thermal comfort in Italian classrooms under free running conditions during mid seasons: Assessment through objective and subjective approaches
522
Thermal comfort in naturally ventilated apartments in summer: Findings from a field study in Hyderabad, India
523
Thermal comfort in naturally ventilated buildings in hot-humid area of China
524
Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55
525
Thermal Comfort in Naturally Ventilated Classroom: A Literature Review
526
Thermal comfort in office buildings: Two case studies commented
527
Thermal comfort in offices in summer: Findings from a field study under the ‘setsuden’ conditions in Tokyo, Japan
528
Thermal comfort in open plan offices in northern Italy: An adaptive approach
529
Thermal comfort in outdoor urban spaces in Singapore
530
Thermal comfort in outdoor urban spaces: Analysis across different European countries
531
Thermal comfort in passive solar earth integrated rooms
532
Thermal comfort in residential buildings – Failure to predict by Standard model
533
Thermal comfort in residential buildings: Comfort values and scales for building energy simulation
534
Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria
535
Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria
536
Thermal comfort in transitional spaces—basic concepts: literature review and trial measurement
537
Thermal comfort in undergraduate laboratories — A field study in Kharagpur, India
538
Thermal comfort in urban spaces: impact of vegetation growth: Case study: Piazza della Scienza, Milan, Italy
539
Thermal comfort in urban transitional spaces
540
Thermal Comfort Investigation in Traditional and Modern Urban Canyons in Bandar Abbas, Iran
541
Thermal comfort models: A review and numerical investigation
542
Thermal comfort of aeroplane seats: influence of different seat materials and the use of laboratory test methods
543
Thermal comfort of house and it’s influence on people’s quality of life
544
Thermal comfort of patients: Objective and subjective measurements in patient rooms of a Belgian healthcare facility
545
Thermal comfort prediction for a new passive cooling system
546
THERMAL COMFORT PROPERTIES OF COTTON KNITTED FABRICS IN DRY AND WET STATES
547
Thermal comfort standards for air conditioned buildings in hot and humid Thailand considering additional factors of acclimatization and education level
548
Thermal comfort standards, measured internal temperatures and thermal resilience to climate change of free-running buildings: A case-study of hospital wards
549
Thermal Comfort Study Based on PMV-PPD in the Building of a Screening Center for COVID-19
550
Thermal comfort study of an air-conditioned lecture theatre in the tropics
551
Thermal comfort temperature range for factory workers in warm humid tropical climates
552
Thermal comfort temperatures world-wide - the current position
553
Thermal comfort, skin temperature distribution, and sensible heat loss distribution in the sitting posture in various asymmetric radiant fields
554
Thermal comfort: A review paper
555
Thermal comfort: use of controls in naturally ventilated buildings
556
Thermal Comfort-Based Heat Pumps Utilization for Wind Power Uncertainty Management
557
Thermal compact modeling of parallel plate heat sinks
558
Thermal compact models: an alternative approach
559
Thermal Compatibility and Bond Strength of FRP Reinforcement in Prestressed Concrete Applications
560
Thermal Compatibility and Durability of Wearing Surfaces on GFRP Bridge Decks
561
Thermal compatibility of centrifugally atomized U–Mo powders with aluminium in a dispersion fuel Original Research Article
562
Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries
563
Thermal compatibility of dry sliding tribo-specimens
564
Thermal component of stimulated brillouin scattering due to two-photon absorption
565
Thermal components in the early X-ray afterglow of GRBs
566
Thermal composting of faecal matter as treatment and possible disinfection method––laboratory-scale and pilot-scale studies
567
Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds
568
Thermal Condensation of 1-Aryl/ hetaryl-3-methyl-2- pyrazolin-5-ones with Aromatic Aldehydes. synthesis of 4- arylidenepyrazolones
569
Thermal condensation of trinuclear lanthanide butoxides. Molecular structure of La5(μ5-O)(μ3-OtBu)4(μ-OtBu)4(OtBu)5
570
Thermal conditioning for urban outdoor spaces through the use of evaporative wind towers
571
Thermal Conduct ivity and Thermal Diffusivity of Biodiesel and Bioethanol Samples
572
Thermal conductance at millikelvin temperatures of woven ribbon cable with phosphor-bronze clad superconducting wires Original Research Article
573
Thermal conductance in a quantum waveguide modulated with quantum dots
574
Thermal conductance in quantum wire with two obstacles
575
Thermal conductance measurement of windows: An innovative radiative method
576
Thermal conductance measurement on vacuum glazing
577
Thermal conductance measurements of bolted copper to copper joints at sub-Kelvin temperatures Original Research Article
578
Thermal conductance of randomly oriented composites of thin layers
579
Thermal conductance of the interfaces between the III-nitride materials and their substrates: Effects of intrinsic material properties and interface conditions
580
Thermal conductance through discrete quantum channels
581
Thermal conduction analysis and characterization of solder bumps in flip chip package
582
Thermal conduction analysis of layered functionally graded materials
583
Thermal conduction and thermal diffusion in dilute polyatomic gas mixtures
584
Thermal conduction between a heated microcantilever and a surrounding air environment
585
Thermal conduction in a 2-D FCT plasma hydrodynamic code Original Research Article
586
Thermal conduction in classical low-dimensional lattices
587
Thermal conduction in classical low-dimensional lattices
588
Thermal conduction induced by electron-beam
589
Thermal conduction measurement of miniature coaxial cables between 0.3 and 4.5 K for the wiring of superconducting detectors Original Research Article
590
Thermal conduction model of metal and ceramics
591
Thermal conduction of a circular inclusion with variable interface parameter
592
Thermal conductive heating in fractured bedrock: Screening calculations to assess the effect of groundwater influx
593
Thermal conductive properties of Ni–P electroless plated SiCp/Al composite electronic packaging material
594
Thermal Conductivities of [bmim][PF6], [hmim][PF6], and [omim][PF6] from 294 to 335 K at Pressures up to 20 MPa
595
Thermal conductivities of actinides (U, Pu, Np, Cm, Am) and uranium-alloys (U–Zr, U–Pu–Zr and U–Pu–TRU–Zr)
596
Thermal conductivities of americium dioxide and sesquioxide by molecular dynamics simulations
597
Thermal conductivities of hypoeutectic Al-Cu alloys during solidification and cooling
598
Thermal conductivities of hypoeutectic Al-Cu alloys during solidification and cooling
599
Thermal conductivities of hypostoichiometric (U, Pu, Am)O2−x oxide
600
Thermal conductivities of irradiated UO2 and (U, Gd)O2 pellets
601
Thermal conductivities of irradiated UO2 and (U,Gd)O2
602
Thermal conductivities of iso-volume centre-symmetric honeycombs
603
Thermal conductivities of solid and liquid phases for neopentylglycol, aminomethylpropanediol and their binary alloy Original Research Article
604
Thermal conductivities of solid and liquid phases for pure Al, pure Sn and their binary alloys
605
Thermal conductivities of solid and liquid phases in Pb–Cd and Sn–Zn binary eutectic alloys
606
Thermal conductivities of ThO2, NpO2 and their related oxides: Molecular dynamics study
607
Thermal conductivities of three-dimensionally woven fabric composites
608
Thermal conductivities of YSZ/Al2O3 composites
609
Thermal conductivities of yttria-stabilized zirconia films measured by a laser-heating AC method
610
Thermal conductivities study of new types of compound adsorbents used in solar adsorption refrigeration
611
Thermal conductivities study on silica aerogel and its composite insulation materials
612
Thermal conductivity analysis of a briquette with additive hazelnut shells
613
Thermal conductivity and acid dissolution behavior of MgO–ZrO2 ceramics for use in LWR inert matrix fuel
614
THERMAL CONDUCTIVITY AND ACOUSTIC PROPERTIES OF NATURAL FIBER MIXED POLYURETHANE COMPOSITES
615
Thermal Conductivity and Anisotropy of Intermolecular Potential Energy in Refrigerant Fluids R125, R134a, R12, R14 and R141b
616
Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures
617
Thermal conductivity and compressive strength of expanded perlite aggregate concrete with mineral admixtures
618
Thermal conductivity and critical modes in one-dimensional Fibonacci quasicrystals
619
Thermal conductivity and critical modes in one-dimensional Fibonacci quasicrystals
620
Thermal conductivity and cycle characteristic of metal hydride sheet formed using aramid pulp and carbon fiber
621
Thermal conductivity and density of clay pastes at various water contents for pelotherapy use
622
Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride
623
Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride
624
Thermal conductivity and dielectric property of hot-pressing sintered AlN–BN ceramic composites
625
Thermal conductivity and fire resistance of epoxy molding compounds filled with Si3N4 and Al(OH)3
626
Thermal conductivity and interfacial energies of solid Sn in the Sn–Cu alloy
627
Thermal conductivity and interfacial energies of solid Sn solution in the Sn–Ag–In ternary alloy
628
Thermal conductivity and interfacial energies of solid Sn3Sb2 in the Sn–Sb peritectic system
629
Thermal conductivity and interfacial energy of solid Bi solution in the Bi–Al–Zn eutectic system
630
Thermal conductivity and Kapitza resistance of epoxy resin fiberglass tape at superfluid helium temperature Original Research Article
631
Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material
632
Thermal conductivity and latent heat thermal energy storage properties of LDPE/wax as a shape-stabilized composite phase change material
633
Thermal conductivity and limiting oxygen index of basic rubber blend/aluminium hydroxide particulate composite
634
Thermal conductivity and limiting oxygen index of basic rubber blend/aluminium hydroxide particulate composite
635
Thermal conductivity and Lorenz number of the Ce1−xLaxNiAl4 Kondo alloys
636
Thermal conductivity and magnetic properties of the B substituted Ca3Co4O9
637
Thermal conductivity and microstructure of Ti-doped graphite Original Research Article
638
Thermal conductivity and permeability of consolidated expanded natural graphite treated with sulphuric acid Original Research Article
639
Thermal conductivity and phase stability of plasma sprayed ZrO2–Y2O3–La2O3 coatings
640
Thermal conductivity and phase-change properties of aqueous alumina nanofluid
641
THERMAL CONDUCTIVITY AND RESISTANCE OF NOMEX FABRICS EXPOSED TO SALTY WATER
642
Thermal conductivity and rheological properties of graphite/oil nanofluids
643
Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes
644
Thermal conductivity and specific heat of bulk amorphous chalcogenides Ge20Te80−xSex (x = 0,1,2,8)
645
Thermal conductivity and specific heat of kaolinite: Evolution with thermal treatment
646
Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites Original Research Article
647
Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell
648
Thermal conductivity and tensile response of defective graphene: A molecular dynamics study Original Research Article
649
Thermal conductivity and the isotope effect in Li2O
650
Thermal conductivity and thermal contact conductance studies on Al2O3/Al–AlN metal matrix composite
651
Thermal conductivity and thermal cycle life of La2O3 and HfO2 doped ZrO2–Y2O3 coatings produced by EB-PVD
652
Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres
653
Thermal conductivity and thermal diffusivity of cores from a 26 meter deep borehole drilled in Livingston Island, Maritime Antarctic
654
Thermal Conductivity and Thermal Diffusivity of Pulse-Heated W–Re Alloys
655
Thermal conductivity and thermal expansion coefficient of diamond/5 wt%Si–Cu composite by vacuum hot pressing
656
Thermal conductivity and thermal expansion of Ir3X (X = Ti, Zr, Hf, V, Nb, Ta) compounds for high-temperature applications
657
Thermal conductivity and thermodynamics of majoritic garnets: implications for the transition zone
658
Thermal conductivity and thermo-power of ( and ) bulk superconductors
659
Thermal Conductivity and Viscoelastic Properties of UV-curable Urethane Acrylate Reinforced with Modified Al2O3 Nanoparticles
660
Thermal Conductivity and Viscosity of Aqueous K2SO4 Solutions at Temperatures from 298 to 575 K and at Pressures up to 30 MPa
661
Thermal conductivity and viscosity of water-in-oil nanoemulsions
662
Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO2 dissolution
663
Thermal conductivity as an indicator of fat content in milk
664
Thermal conductivity bounds for isotropic, porous materials
665
Thermal conductivity calculation of magnetite using molecular dynamics simulation
666
Thermal Conductivity Characterization of Bamboo Fiber Reinforced Polyester Composite
667
Thermal conductivity correlations for minor constituent fluids in natural gas: n-octane, n-nonane and n-decane
668
Thermal conductivity decomposition and analysis using molecular dynamics simulations. Part I. Lennard-Jones argon
669
Thermal conductivity decomposition and analysis using molecular dynamics simulations: Part II. Complex silica structures
670
Thermal conductivity degradation of ceramic materials due to low temperature, low dose neutron irradiation
671
Thermal conductivity determinations of thermal barrier coatings
672
Thermal conductivity determinations of thermal barrier coatings
673
Thermal conductivity due to magnons in high-quality single crystals of the two-leg spin-ladder system (Ca,Sr,La)14Cu24O41
674
Thermal conductivity effects on steady state propagation speed during self-propagating high-temperature synthesis of Ti + C green compacts
675
Thermal conductivity enhancement dependent pH and chemical surfactant for Cu-H2O nanofluids
676
Thermal conductivity enhancement in a latent heat storage system
677
Thermal Conductivity Enhancement in Aqueous Suspensions of Carbon Multi-Walled and Double-Walled Nanotubes in the Presence of Two Different Dispersants
678
Thermal conductivity enhancement of Al2O3 nanofluids based on the mixtures of aqueous NaCl solution and CH3OH
679
Thermal conductivity enhancement of binary nanoemulsion (O/S) for absorption application
680
Thermal conductivity enhancement of BN/silicone composites cured under electric field: Stacking of shape, thermal conductivity, and particle packing structure anisotropies
681
Thermal conductivity enhancement of carbon fiber composites
682
Thermal conductivity enhancement of energy storage media using carbon fibers
683
Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles
684
Thermal conductivity enhancement of nanofluids in conjunction with electrical double layer (EDL)
685
Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: A review
686
Thermal conductivity enhancement of paraffins by increasing the alignment of molecules through adding CNT/graphene
687
Thermal conductivity enhancement of PEG/SiO2 composite PCM by in situ Cu doping
688
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
689
Thermal conductivity enhancement of phase change materials using a graphite matrix
690
Thermal conductivity enhancement of ZnO nanofluid using a one-step physical method
691
Thermal conductivity enhancement with different fillers for epoxy resin adhesives
692
Thermal conductivity equations for pure fluids in a heuristic extended corresponding states framework: I. Modeling techniques
693
Thermal conductivity equations for pure fluids in a heuristic extended corresponding states framework: II. Application to two fluids
694
Thermal conductivity estimation in non-linear problems
695
Thermal conductivity evaluation of GaN–AlN–(4H)SiC hetero-epitaxial material system
696
Thermal conductivity evaluation of high burnup mixed-oxide (MOX) fuel pellet
697
Thermal conductivity features of ZnO-based varistors using the laser-pulse method
698
Thermal conductivity features of ZnO-based varistors using the laser-pulse method
699
Thermal conductivity for single-walled carbon nanotubes from Einstein relation in molecular dynamics Original Research Article
700
Thermal conductivity from dynamic response of DSC
701
Thermal conductivity improvement of phase change materials/graphite foam composites Original Research Article
702
Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications
703
Thermal conductivity in dynamics of first-order phase transitions
704
Thermal conductivity in mullite/ZrO2 composite coatings
705
Thermal conductivity in relation to porosity and hardness of terrestrial porous media
706
Thermal conductivity in vortex state of nodal superconductors
707
Thermal conductivity investigation for upsetting with a procedure of combining inverse model and the proposed regularization of Tikhonov method
708
Thermal conductivity investigation of zirconia co-doped with yttria and niobia EB-PVD TBCs
709
Thermal conductivity mapping of pyrolytic carbon and silicon carbide coatings on simulated fuel particles by time-domain thermoreflectance
710
Thermal conductivity measurement and characterization of binary nanofluids
711
Thermal conductivity measurement and sedimentation detection of aluminum oxide nanofluids by using the 3ω method
712
Thermal conductivity measurement below 40 K of the CFRP tubes for the Mid-Infrared Instrument mounting struts
713
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
714
Thermal conductivity measurement of anisotropic material using photothermal deflection method
715
Thermal conductivity measurement of geothermal cementing systems: an experimental comparison between the line source and Jaeger methods
716
Thermal conductivity measurement of HTS tapes and stacks for current lead applications
717
Thermal conductivity measurement of insulating materials with a three layers device
718
Thermal conductivity measurement of liquid materials by a hot-disk method in short-duration microgravity environments
719
Thermal conductivity measurement of liquid materials by a hot-disk method in short-duration microgravity environments
720
Thermal conductivity measurement of methanol-based nanofluids with Al2O3 and SiO2 nanoparticles
721
Thermal conductivity measurement of oil in Water (O/W) nanoemulsion and oil in H2O/LiBr (O/S) binary nanoemulsion for absorption application
722
Thermal Conductivity Measurement of Semitransparent Solids by Hot-Wire Technique1
723
Thermal Conductivity Measurement of Submicron-Thick Films Deposited on Substrates by Modified ac Calorimetry (Laser-Heating Ångstrom Method)
724
Thermal Conductivity Measurement of Thermally-Oxidized SiO2 Films on a Silicon Wafer Using a Thermo-Reflectance Technique
725
Thermal conductivity measurements of a traditional fermented dough in the frozen state Original Research Article
726
Thermal conductivity measurements of alumina powders and molded Min-K in vacuum
727
Thermal Conductivity Measurements of Aqueous SrCl2 and Sr(NO3)2 Solutions in the Temperature Range Between 293 and 473 K at Pressures up to 100 MPa
728
Thermal conductivity measurements of copper-coated metal hydrides (LaNi5, Ca0.6Mm0.4Ni5, and LaNi4.75Al0.25) for use in metal hydride hydrogen compression systems
729
Thermal Conductivity Measurements of Liquid Mercury and Gallium by a Transient Hot-Wire Method in a Static Magnetic Field
730
Thermal conductivity measurements of pitch-bonded graphites at millikelvin temperatures: Finding a replacement for AGOT graphite Original Research Article
731
Thermal conductivity measurements of porous dust aggregates: I. Technique, model and first results
732
Thermal Conductivity Measurements of Thin Amorphous Silicon Films by Scanning Thermal Microscopy
733
Thermal Conductivity Measurements of Thin Insulating Layers Deposited on High-Conducting Sheets
734
Thermal Conductivity Modeling of Pure Refrigerants in a Three-Parameter Corresponding States Format
735
Thermal Conductivity Modeling of Refrigerant Mixtures in a Three-Parameter Corresponding States Format
736
Thermal conductivity modelling of terrestrial soil media—A comparative study
737
Thermal Conductivity Models for Polymer Stabilized Hybrid Nanofluids Prepared by One-Step Method
738
Thermal conductivity of (Hf1−xZrx)6Ta2O17 (x = 0, 0.1, 0.3 and 0.5) ceramics
739
Thermal conductivity of (Sm1–xLax)2Zr2O7 (x=0, 0.25, 0.5, 0.75 and 1) oxides for advanced thermal barrier coatings
740
Thermal conductivity of (U,Ce)O2 with and without Nd or Zr
741
Thermal conductivity of (U,Pu,Np)O2 solid solutions
742
Thermal Conductivity of 1,1-Difluoroethane (HFC-152a)
743
Thermal conductivity of 2D C–C composites with pyrolytic and glass-like carbon matrices
744
Thermal conductivity of a beryllium gas packed bed
745
Thermal conductivity of a clay-based aerogel
746
Thermal conductivity of a CuCrZr alloy from 5 K to room temperatures Original Research Article
747
Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite Original Research Article
748
Thermal conductivity of a metal-organic framework (MOF-5): Part II. Measurement
749
Thermal conductivity of a single carbon nanocoil measured by field-emission induced thermal radiation Original Research Article
750
Thermal conductivity of a volcanic rock material (olivine-melilitite) in the temperature range between 288 and 1470 K
751
Thermal conductivity of Al2O3/SiC platelet composites
752
Thermal Conductivity of AlN and SiC Thin Films
753
Thermal conductivity of AlN ceramics sintered with CaF2 and YF3
754
Thermal conductivity of AlN/polystyrene interpenetrating networks
755
Thermal Conductivity of Aloji Fireclay as Refractory Material
756
Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution
757
Thermal conductivity of alumina inclusion/glass matrix composite materials: local and macroscopic scales
758
Thermal conductivity of ammonia borane complex and its composites with aluminum powder
759
Thermal conductivity of ammonia + lithium nitrate and ammonia + lithium nitrate + water solutions over a wide range of concentrations and temperatures
760
Thermal conductivity of ammonia + water mixtures over a wide range of concentrations
761
Thermal conductivity of AmO2−x
762
Thermal conductivity of amorphous silicon thin films
763
Thermal conductivity of amorphous Teflon (AF 1600) at high pressure
764
Thermal conductivity of an aligned carbon nanotube array Original Research Article
765
Thermal conductivity of anodized aluminum oxide layer: The effect of electrolyte and temperature
766
Thermal conductivity of aqueous BaI2 solutions in the temperature range 293–473 K and the pressure range 0.1–100 MPa
767
Thermal Conductivity of Aqueous Potassium Chloride Solutions
768
Thermal Conductivity of Aqueous Sugar Solutions under High Pressure
769
Thermal conductivity of archaeological ceramics: The effect of inclusions, porosity and firing temperature
770
Thermal conductivity of A-site doped pyrochlore oxides studied by molecular-dynamics simulation
771
Thermal conductivity of BaPuO3 at temperatures from 300 to 1500 K
772
Thermal conductivity of BaWO4 single crystal
773
Thermal Conductivity of Binary Refrigerant Mixtures of HFC-32/125 and HFC-32/134a in the Liquid Phase
774
Thermal conductivity of boron nitride reinforced polyethylene composites
775
Thermal Conductivity of Carbon Aerogels as a Function of Pyrolysis Temperature
776
Thermal Conductivity of Carbon Dioxide–Methane Mixtures at Temperatures Between 300 and 425 K and at Pressures up to 12 MPa
777
Thermal conductivity of carbon nanofiber mats Original Research Article
778
Thermal conductivity of carbon nanotube reinforced aluminum composites: A multi-scale study using object oriented finite element method
779
Thermal conductivity of carbon-containing refractories
780
Thermal conductivity of carbon-phenolic 8-harness satin weave composites
781
Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling
782
Thermal conductivity of CeNiAl4 Kondo lattice
783
Thermal conductivity of ceramic particle filled polymer composites and theoretical predictions
784
Thermal conductivity of ceramics during irradiation
785
Thermal Conductivity of Chalcogenide As2S3 Thin Films
786
Thermal Conductivity of Clay Bricks
787
Thermal conductivity of coal ash and slags and models used
788
Thermal conductivity of coconut fibre filled ferrocement sandwich panels
789
Thermal conductivity of combustion synthesized β-sialons
790
Thermal conductivity of composite sorbents “salt in porous matrix” for heat storage and transformation
791
Thermal conductivity of composites made of wastes of wood and expanded polystyrene
792
Thermal conductivity of compressed beryllium pebble beds
793
Thermal conductivity of compressed ceramic breeder pebble beds
794
Thermal Conductivity of Cu 2 O-TiO 2 Composite -Nanofluid Based on Maxwell model
795
Thermal Conductivity of Cu and Al-Water Nanofluids
796
Thermal conductivity of diatomic liquid in a narrow channel including a nanobubble
797
Thermal conductivity of EB-PVD thermal barrier coatings evaluated by a steady-state laser heat flux technique
798
Thermal conductivity of electron-doped CaMnO3 perovskites: Local lattice distortions and optical phonon thermal excitation Original Research Article
799
Thermal conductivity of ethyl fluoride (HFC161)
800
Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid
801
Thermal conductivity of ethylene vinyl acetate copolymer/nanofiller blends
802
Thermal conductivity of exfoliated graphite nanoplatelet paper Original Research Article
803
Thermal Conductivity of Feed Pellets
804
Thermal conductivity of fibrous glass board by guarded hot plates and heat flow meters: An iInternational round-robin
805
Thermal conductivity of fired clays: Effects of mineralogical and physical properties of the raw materials
806
Thermal conductivity of fluorinated graphene: A non-equilibrium molecular dynamics study
807
Thermal conductivity of fused quartz and quartz ceramic at high temperatures and high pressures Original Research Article
808
Thermal conductivity of GaN crystals in 4.2–300 K range
809
Thermal conductivity of granular materials relevant to the thermal evolution of cometary nuclei
810
Thermal conductivity of graphite filled liquid crystal polymer composites and theoretical predictions
811
Thermal conductivity of graphite/silicone rubber prepared by solution intercalation
812
Thermal conductivity of hemp concretes: Variation with formulation, density and water content
813
Thermal conductivity of heterogeneous LWR MOX fuels
814
Thermal Conductivity of HFC-32, HFC-125, and HFC-134a in the Solid Phase
815
Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method
816
Thermal conductivity of highly crystallized polyethylene
817
Thermal conductivity of highly loaded aluminium nitride–poly(propylene glycol) dispersions
818
Thermal conductivity of highly porous mullite material
819
Thermal conductivity of highly porous mullite material Original Research Article
820
Thermal conductivity of highly porous mullite materials
821
Thermal conductivity of highly porous zirconia
822
Thermal conductivity of high-temperature Si–B–C–N thin films
823
Thermal conductivity of homogeneous and heterogeneous MOX fuel with up to 44 MWd/kgHM burn-up
824
Thermal conductivity of hydrogenated amorphous silicon
825
Thermal conductivity of InAs quantum dot stacks using AlAs strain compensating layers on InP substrate
826
Thermal conductivity of individual carbon nanofibers Original Research Article
827
Thermal conductivity of isotopically enriched 28Si: revisited
828
Thermal conductivity of isotopically enriched silicon
829
Thermal conductivity of Kevlar 49 between 7 and 290 K
830
Thermal conductivity of La0.67(CaxSr1−x)0.33MnO3 (x=0, 0.5, 1) and La0.6Y0.07Ca0.33MnO3 pellets between 10 and 300 K
831
Thermal conductivity of leaf compost used in biofilters: An experimental and theoretical investigation
832
Thermal conductivity of limestone from Gaziantep (Turkey)
833
Thermal conductivity of liquid 1,1,1,3,3,3-hexafluoropropane (HFC-236fa) from 253 K to 373 K and pressure up to 30 MPa
834
Thermal conductivity of liquid octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) from molecular dynamics simulations
835
Thermal conductivity of liquid phase sintered silicon carbide
836
Thermal Conductivity of Liquid Tin and Indium
837
Thermal conductivity of lower-mantle minerals
838
Thermal conductivity of low-temperature sintered calcium aluminosilicate glass–silicon nitride whisker composites
839
Thermal conductivity of magnetically aligned carbon nanotube buckypapers and nanocomposites
840
Thermal conductivity of ME771 glass–epoxy laminate from millikelvin temperatures to 4 K
841
Thermal conductivity of metal-organic framework 5 (MOF-5): Part I. Molecular dynamics simulations
842
Thermal conductivity of methane hydrate-bearing Ulleung Basin marine sediments: Laboratory testing and numerical evaluation
843
Thermal conductivity of MgO periclase at high pressure: Implications for the D″ region
844
Thermal conductivity of MgO, MgSiO3 perovskite and post-perovskite in the Earthʹs deep mantle
845
Thermal conductivity of micro-and nanostructural epoxy composites at low temperatures
846
Thermal Conductivity of Mineral Wool Materials Partially Saturated by Water
847
Thermal conductivity of mixed alkali silicate glasses at low temperature
848
Thermal Conductivity of Molten Lead-Free Solders
849
Thermal conductivity of multicomponent polyatomic dilute gas mixtures
850
Thermal conductivity of MWCNT/epoxy composites: The effects of length, alignment and functionalization Original Research Article
851
Thermal conductivity of nanocomposites with high volume fractions of particles
852
Thermal conductivity of nanocrystalline carbon films studied by pulsed photothermal reflectance
853
Thermal Conductivity of Nanofluids – Experimental and Theoretical
854
Thermal conductivity of nanofluids containing high aspect ratio fillers
855
Thermal conductivity of nanoporous ZrO2–4 mol% Y2O3 multilayer coatings fabricated by EB-PVD
856
Thermal conductivity of near-stoichiometric (U, Er)O2 solid solutions
857
Thermal conductivity of negative-thermal-expansion oxide, Zr1−xYxW2O8 (x=0.00, 0.01)—temperature dependence and effect of structural phase transition
858
Thermal conductivity of neptunium dioxide
859
Thermal conductivity of neutron irradiated Be12Ti
860
Thermal conductivity of Newtonian and non-Newtonian liquids
861
Thermal conductivity of Ni3Al with ternary additions
862
Thermal conductivity of Ni3Al with ternary additions
863
Thermal conductivity of Ni3X and Pt3X in ordered and disordered states
864
Thermal conductivity of Ni3X and Pt3X in ordered and disordered states
865
Thermal conductivity of Ni-Al powder compacts for reaction synthesis
866
Thermal Conductivity of Nitrogen-Methane Mixtures at Temperatures Between 300 and 425 K and at Pressures Up to 16 MPa
867
Thermal conductivity of non-Newtonian nanofluids: Experimental data and modeling using neural network
868
Thermal conductivity of non-stoichiometric americium oxide: A molecular dynamics study
869
Thermal Conductivity of Normal Liquid 3He in Aerogel
870
Thermal Conductivity of Opacified Powder Filler Materials for Vacuum Insulations1
871
Thermal conductivity of organic superconductors in oriented magnetic field
872
Thermal conductivity of organoplastics
873
Thermal conductivity of packed beds consisting of porous particles wetted with binary mixtures
874
Thermal conductivity of particle filled polyethylene composite materials
875
Thermal conductivity of particle filled polyethylene composite materials
876
Thermal conductivity of periodic array of intermolecular junctions of silicon nanowires
877
Thermal conductivity of plasma sprayed Sm2Zr2O7 coatings
878
Thermal conductivity of plasma-sprayed W/SiC composite for high-temperature energy applications
879
Thermal conductivity of polycrystalline and amorphous Se–Te–Cu system Original Research Article
880
Thermal Conductivity of Polymethyl Methacrylate (PMMA) and Borosilicate Crown Glass BK7
881
Thermal conductivity of porous alumina ceramics prepared using starch as a pore-forming agent
882
Thermal conductivity of porous SiC composite ceramics derived from paper precursor
883
Thermal conductivity of powder silica hollow spheres
884
Thermal conductivity of pressed powder compacts: tin oxide and alumina
885
Thermal conductivity of propane and butane in the liquid phase
886
Thermal conductivity of PTFE and PTFE composites
887
Thermal conductivity of pyrochlore R2Ti2O7 (R=rare earth)
888
Thermal conductivity of rare earth–uranium ternary oxides of the type RE6UO12
889
Thermal Conductivity of Reduced Graphene Oxide by Pulse Laser in Ethylene Glycol
890
Thermal Conductivity of Reference Solid Materials
891
Thermal conductivity of refrigerants in the liquid state: A comparison of estimation methods
892
Thermal conductivity of selected liquid foods at elevated pressures up to 700 MPa Original Research Article
893
Thermal conductivity of selective water sorbents under the working conditions of a sorption chiller
894
Thermal conductivity of semiconductor (bismuth–telluride)–semimetal (antimony) superlattice nanostructures Original Research Article
895
Thermal conductivity of SiC after heavy ions irradiation
896
Thermal conductivity of SiC ceramic fabricated by liquid infiltrating molten Si into mesocarbon microbeads-based preform
897
Thermal conductivity of silicon carbide densified with rare-earth oxide additives
898
Thermal conductivity of silver doped lanthanum manganites between 10 and 300 K Original Research Article
899
Thermal Conductivity of Simulated Fuels with Dissolved Fission Products
900
Thermal conductivity of single and multi-stacked DI-BSCCO tapes Original Research Article
901
Thermal conductivity of single-walled carbon nanotubes
902
Thermal conductivity of sintered lithium orthosilicate compacts
903
Thermal Conductivity of Sm3S4 System with Mixed Valence Sm Ions
904
Thermal Conductivity of Small Nickel Particles
905
Thermal conductivity of soft Bangkok clay from laboratory and field measurements
906
Thermal conductivity of soils and rocks from the Melbourne (Australia) region
907
Thermal Conductivity of Some Compacted Trinidadian Soils as affected by Peat Content
908
Thermal conductivity of stretched and annealed poly (p-phenylene sulfide) films
909
Thermal conductivity of strontium uranates
910
Thermal conductivity of subcooled liquid oxygen Original Research Article
911
Thermal Conductivity of Suspensions Containing Nanosized SiC Particles
912
Thermal conductivity of suspensions in shear flow fields
913
Thermal Conductivity of Suspensions of Carbon Nanotubes in Water
914
Thermal conductivity of Tecamax® SRP from millikelvin temperatures to room temperature Original Research Article
915
Thermal conductivity of ternary mixtures for concrete pavements
916
Thermal Conductivity of Ternary Refrigerant Mixtures of HFC-32/125/134a in the Liquid Phase
917
Thermal conductivity of Tetryl by modulated differential scanning calorimetry
918
Thermal conductivity of the gadolinium calcium silicate apatites: Effect of different point defect types Original Research Article
919
Thermal Conductivity of the Refrigerant Mixtures R404A, R407C, R410A, and R507A
920
Thermal conductivity of the ternary eutectic LiNO3–NaNO3–KNO3 salt mixture in the solid state using a simple inverse method
921
Thermal conductivity of thermal barrier coatings
922
Thermal conductivity of thermal barrier coatings
923
Thermal conductivity of thermally conductive composites consisting of core–shell particles with nanostructured shell layers
924
Thermal conductivity of thermally-isolating polymeric and composite structural support materials between 0.3 and 4 K Original Research Article
925
Thermal conductivity of thermoelectric thick films prepared by electrodeposition
926
Thermal Conductivity of Thermoplastic Natural Rubber (TPNR) Composite Filled with Stainless Steel Particle
927
Thermal Conductivity of Thermoplastics Reinforced with Natural Fibers
928
Thermal conductivity of thin single-crystalline germanium-on-insulator structures
929
Thermal conductivity of three-component composites of core-shell particles
930
Thermal conductivity of titanium dioxide films grown by metal-organic chemical vapor deposition
931
Thermal Conductivity of Toluene+Cyclopentane Mixtures: Measurements and Prediction
932
Thermal conductivity of Torlon between 4.2 and 300 K Original Research Article
933
Thermal conductivity of traditional ceramics. Part I: Influence of bulk density and firing temperature
934
Thermal conductivity of traditional ceramics: Part II: Influence of mineralogical composition
935
Thermal conductivity of tungsten–copper composites
936
Thermal conductivity of U3O8 from 300 to 1100 K
937
Thermal conductivity of unidirectional carbon/carbon composites with different carbon matrixes
938
Thermal conductivity of unsaturated packed beds—comparison of experimental results and estimation methods
939
Thermal conductivity of UO2+x and U4O9−y
940
Thermal conductivity of uranium–plutonium oxide fuel for fast reactors
941
Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles
942
Thermal conductivity of Water-based nanofluids: Prediction and comparison of models using machine learning
943
Thermal conductivity of wood—models for different stages of combustion
944
Thermal Conductivity of Xonotlite Insulation Material
945
Thermal conductivity of Y6WO12 and Yb6WO12 ceramics
946
Thermal conductivity of yttria-stabilized zirconia–hafnia solid solutions Original Research Article
947
Thermal conductivity of zirconia based inert matrix fuel: use and abuse of the formal models for testing new experimental data
948
Thermal conductivity of zirconia coatings with zig-zag pore microstructures Original Research Article
949
Thermal conductivity of zirconia–alumina composites
950
Thermal conductivity of λ-(BETS)2GaCl4 under oriented magnetic fields
951
Thermal conductivity prediction of a Cu circular nanowire
952
Thermal conductivity predictions of composites containing percolated networks of uniform cylindrical inclusions
953
Thermal conductivity probe length to radius ratio problem when measuring building insulation materials
954
Thermal conductivity studies of novel nanofluids based on metallic silver decorated mesoporous silica nanoparticles
955
Thermal conductivity tensor of single crystalline Co-doped BaFe2As2
956
Thermal conductivity through various restorative lining materials
957
Thermal conductivity variation on natural convection flow of water–alumina nanofluid in an annulus
958
Thermal conductivity, heat capacity, and compressibility of atactic poly(propylene) under high pressure
959
Thermal conductivity, rheological behaviour and density of non-Newtonian ethylene glycol-based SnO2 nanofluids
960
Thermal conductivity, shear viscosity and specific heat of rigid water models
961
Thermal Conductivity, Thermal Diffusivity, and Heat Capacity of Gaseous Argon and Nitrogen
962
Thermal conductivity, viscosity, and heat transfer process in nanofluids: A critical review
963
Thermal consequences of thrust faulting: simultaneous versus successive fault activation and exhumation
964
Thermal consideration of CANDU-SCWR sliding pressure startup through subchannel analysis Original Research Article
965
Thermal considerations in inferring frictional heating from vitrinite reflectance and implications for shallow coseismic slip within the Nankai Subduction Zone
966
Thermal considerations on the design and operation of lens ducts
967
Thermal constraint considerations in design of a heat recovery boiler
968
Thermal constraints on disposal of heat-emitting waste in argillaceous rocks
969
Thermal Constraints on Earthquake Depths in California
970
Thermal constraints on the survival of primitive blobs in the lower mantle
971
Thermal constraints on the survival of primitive blobs in the lower mantle
972
Thermal constraints to population growth of bacterial-feeding nematodes
973
Thermal constraints to population growth of bacterial-feeding nematodes
974
Thermal constriction phenomenon in fretting: Theory and implications
975
Thermal contact conductance and its dependence on load cycling
976
Thermal contact conductance in advanced AC calorimetry
977
Thermal contact conductance of coated surfaces
978
Thermal contact conductance of pressed contacts at low temperatures Original Research Article
979
Thermal contact conductance under low applied load in a vacuum environment
980
Thermal contact conductance: effect of overloading and load cycling
981
Thermal contact resistance at low contact pressure: Effect of elastic deformation
982
Thermal contact resistance at the interface of double tubes assembled by plastic deformation
983
Thermal contact resistance between plasma-sprayed particles and flat surfaces
984
Thermal contact resistance correlation for metals across bolted joints
985
Thermal contact resistance estimation and metallurgical transformation identification during the hot stamping
986
Thermal contact resistance of different materials between 0.3 K and 4.5 K
987
Thermal contraction crack polygons on Mars: A synthesis from HiRISE, Phoenix, and terrestrial analog studies
988
Thermal contrast detected with a quantum detector
989
Thermal contrast detected with a thermal detector
990
Thermal control and performance assessment of a proton exchanger membrane fuel cell generator
991
Thermal control coatings on magnesium alloys prepared by plasma electrolytic oxidation
992
Thermal Control Methods for Reducing Heat in 3D ICs - TSV (Through-Silicon-Via)
993
Thermal control of a discontinuously occupied building using a classical and a fuzzy logic approach
994
Thermal Control of Building Using Latent Heat Storage South Wall
995
Thermal control of spaceborne image sensor using heat pipe cooling system
996
Thermal control of the liquid lithium divertor for NSTX
997
Thermal control of transmittance/diffraction states of holographic structures composed of polymer and liquid crystal phases
998
Thermal control to maximize photovoltaic powered reverse osmosis desalination systems productivity Original Research Article
999
Thermal control via state feedback using a low order model built from experimental data by the Modal Identification Method
1000
Thermal convection for a thermo-dependent yield stress fluid in an axisymmetric horizontal duct
