<< مقالات لاتين >>
<< بر اساس عنوان >>
1
An expeditious preparation of E-2-amino-5-hydroxyadamantane and its Z-isomer
2
An expeditious preparation of various sulfoforms of the disaccharide β-d-Galp-(1 → 3)-d-Galp, a partial structure of the linkage region of proteoglycans, as their 4-methoxyphenyl β-d-glycosides Original Research Article
3
An expeditious protocol for sesquiterpene-cored functionalized arenes from S-(−)-citronellal
4
An expeditious regioselective synthesis of [60]fullerene e,e,e tris-adduct building blocks
5
An expeditious route to carbocyclic nucleosides: (−)-aristeromycin and (−)-carbodine
6
An expeditious route to cis-Ru(bpy)2C12 (bpy = 2,2′-bipyridine) using carbohydrates as reducers
7
An expeditious route to phosphorus heterocycles based on ring-closing metathesis
8
An expeditious synthesis for γ-carboline analogue 4-aryl-1,3-thiazino[6,5-b]indole derivatives via the trifluoromethanesulfonic acid-promoted isomerization of 3-amidomethylthioindole intermediates to 2-indolyl sulfides
9
An expeditious synthesis of 3-(difluoromethoxy)- and 3-(trifluoromethoxy)-5,6,7,8-tetrahydro-1,6-naphthyridines
10
An expeditious synthesis of 4-fluoropiperidines via aza-Prins cyclization
11
An expeditious synthesis of 6-aminophenanthridines
12
An expeditious synthesis of a (3S,4S,5R)-trihydroxyazepane
13
An expeditious synthesis of a β-silylethanol anchoring group by a silicon directed Baeyer–Villiger oxidation on solid-phase
14
An expeditious synthesis of an analogue of (−)-steviamine by way of the 1,3-dipolar cycloaddition of a nitrile oxide with a 1-C-allyl iminosugar
15
An Expeditious Synthesis of Bioactive 4-Aryl-3, 4-Dihydropyrimidines Using Insitu Generated HCl
16
An expeditious synthesis of bistratamide H using a new fluorous protecting group
17
An expeditious synthesis of cyanohydrin trimethylsilyl ethers using tetraethylammonium 2-(carbamoyl)benzoate as a bifunctional organocatalyst
18
An expeditious synthesis of hexahydrobenzo[f]isochromenes and of hexahydrobenzo[f]isoquinoline via iodine-catalyzed Prins and aza-Prins cyclization
19
An expeditious synthesis of imidazo[1,2-a]pyridines through nucleophile induced ring transformation reactions of 6-aryl-4-methylsulfanyl-2H-pyran-2-one-3-carbonitriles
20
An expeditious synthesis of natural and unnatural disubstituted maleic anhydrides
21
An Expeditious Synthesis of Nocardiolactone
22
An expeditious synthesis of pentosidine, an advanced glycation end product
23
An expeditious synthesis of polyhydroxylated 2-arylbenzo[b]furans
24
An expeditious synthesis of quercetin 3-O-β-d-glucuronide from rutin
25
An expeditious synthesis of tamoxifen, a representative SERM (selective estrogen receptor modulator), via the three-component coupling reaction among aromatic aldehyde, cinnamyltrimethylsilane, and β-chlorophenetole Original Research Article
26
An expeditious synthesis of β-indolylketones catalyzed by p-toluenesulfonic acid (PTSA) using ultrasonic irradiation
27
An expeditious synthesis of β-indolylketones catalyzed by p-toluenesulfonic acid (PTSA) using ultrasonic irradiation
28
An expeditious synthesis of β-pyrimidyl-α,β-didehydro-α-amino acid derivatives and pyrano[2,3-d]pyrimidines using microwave-assisted conditions
29
An expeditious synthetic approach towards the synthesis of Bis-Schiff bases (aldazines) using ultrasound
30
An expeditious synthetic approach towards the synthesis of Bis-Schiff bases (aldazines) using ultrasound
31
An expeditious total synthesis of (±)-jamtine using condensation between imine and acid anhydride
32
An expeditious total synthesis of kalkitoxins: determination of the absolute stereostructure of natural kalkitoxin
33
An expeditious, bidirectional synthesis of furofuranones: a new application of Morita–Baylis–Hillman adducts
34
An expeditious, efficient green methodology for the Boc protection of amines and silyl protection of alcohols over tungstophosphoric acid-doped mesoporous silica
35
An Experience in Testing an Object-Oriented Satellite Control System
36
AN EXPERIENCE OF 31 TRACHEOSTOMIES PERFORMED AT SAIDU TEACHING HOSPITAL
37
An Experience of Ageing on XLPE Insulation
38
An experience of capsule endoscopy from a tertiary care hospital in Pakistan
39
AN EXPERIENCE OF DAY CASE HERNIOTOMY AND ORCHIDOPEXY IN A PRIVATE SURGICAL UNIT, DIR TIMERGERA
40
AN EXPERIENCE OF DEVELOPING MATERIAL FOR TEACHING IDIOMS IN FOREIGN LANGUAGE TEACHING
41
An experience of modelling heat and water exchange at the land surface on a large river basin scale
42
AN EXPERIENCE OF OPERATING 115 CASES OF PROLAPSING HAEMORRHOIDS
43
An Experience of Peer Education Model among Medical Science University Students in Iran
44
AN EXPERIENCE OF PERCUTANEOUS TRANSEPTAL BALLOON MITRAL COMMISSUROTOMY (PTMC) VIA PATENT FORAMEN OVALE (PFO)
45
An Experience of Qualified Preventive Screening: Shiraz Smart Screening Software
46
AN EXPERIENCE OF THE TREATMENT OF UNSTABLE INTER-TROCHANTERIC FRACTURES WITH THE AO/ASIF PROXIMAL FEMORAL NAIL
47
An experience on integrating monitoring and simulation tools in the design of energy-saving buildings
48
An experience with a rare diagnosis of isolated tuberculosis of sternum at JNMC Hospital, Aligarh, India
49
AN EXPERIENCE WITH ANGIOPLASTY AND STENTING OF CAROTID ARTERY STENOSIS WITH EMBOLIC PROTECTION DEVICES
50
AN EXPERIENCE WITH BREAST DISEASE IN A SURGICAL UNIT OF A TEACHING HOSPITAL OF LAHORE
51
An Experience with Manual Ventilation in Respiratory Paralysis Due to Indian Common Krait (Bungarus Caeruleus) Bite
52
An experience with Retrosternal Goiter: Analysis of 89 cases
53
An experience with solar alternative
54
AN EXPERIENCE WITH TUBERCULOUS OSTEOMYELITIS IN TEACHING HOSPITALS OF LAHORE
55
An experience-based system supporting inventory planning: A fuzzy approach
56
An experienced learning genetic algorithm to solve the single machine total weighted tardiness scheduling problem
57
An experiential approach to learning about the balanced scorecard
58
An experiential petrographic classification scheme for the condition assessment of concrete in façade panels and balconies
59
An experiment for the measurement of the bound- β-decay of the free neutron
60
An experiment for the precision measurement of the radiative decay mode of the neutron
61
An experiment for the precision measurement of the radiative decay mode of the neutron
62
An experiment for two-color photoionization using high intensity extreme-UV free electron and near-IR laser pulses
63
An experiment for verification of the auxiliary transmission-line method to evaluate a microwave thermal noise source
64
An experiment in approximating an end effector positional error of a 6 D.O.F manipulator using neural network
65
An experiment in automatic generation of test suites for protocols with verification technology
66
An experiment in autonomous navigation of an underground mining vehicle
67
An experiment in building profiles in information filtering: the role of context of user relevance feedback
68
An experiment in chaotic scattering using repulsive magnetic forces
69
An experiment in design collaboration
70
An experiment in greenway analysis and assessment: the Danube River
71
An Experiment in Linguistic Synthesis with a Fuzzy Logic Controller
72
An Experiment in Linguistic Synthesis with a Fuzzy Logic Controller
73
An experiment in non-conventional energy resource use acceptance and benefits to a village community
74
An experiment in scheduling and planning of non-structured jobs: Lessons learned from artificial intelligence and operational research toolbox
75
An experiment in software component retrieval
76
An experiment in the electrokinetic removal of copper from soil contaminated by the brass industry
77
An experiment in tool integration: The DDBG parallel and distributed debugger
78
An experiment in tool integration: The DDBG parallel and distributed debugger
79
An experiment in unmediated document delivery: EbscoDocTM at Wichita State University
80
An Experiment in Voluntary Environmental Regulation: Participation in EPA′s 33/50 Program
81
An experiment investigation of particle collection efficiency in a fixed valve tray washing column
82
An experiment investigation on dual rotary fretting of medium carbon steel
83
An Experiment of Chocolate Softness Measurements Using a New Machine Design
84
An experiment of state estimation for predictive maintenance using Kalman filter on a DC motor
85
An experiment of state estimation for predictive maintenance using Kalman filter on a DC motor
86
An experiment on auditory and non-auditory disturbances caused by railway and road traffic noises in outdoor conditions
87
An experiment on learning with limited information: nonconvergence, experimentation cascades, and the advantage of being slow
88
An experiment on linguistic tool support for consolidation of requirements from multiple sources in market-driven product development
89
An experiment on Nash implementation
90
An experiment on sequential rent-seeking
91
An experiment on supply function competition
92
An experiment on the causes of bank run contagions
93
An experiment on the consistency of aggregated comparison matrices in AHP
94
An experiment on the effect of oxygen content and air velocity on soot formation in acetylene laminar diffusion flame produced in a burner with a parallel annular coaxial oxidizer flow
95
An experiment on the function of the long-term pair bond period in the socially monogamous bearded reedling
96
AN EXPERIMENT ON THE GYROSCOPIC EFFECT
97
An Experiment on the Hypothesis of Involuntary Truth-Signalling in Bargaining
98
An experiment on the layout and grounding of power distribution wires in a printed circuit board
99
An experiment on the teaching of statistics and probability
100
An experiment on the value of structural information in a 2×2 repeated game
101
An experiment planner for performing successive focused grid searches with an automated chemistry workstation
102
An experiment promoting interdisciplinary applied human development: The University of Pittsburgh mode
103
An experiment study of the lubrication behavior of graphite in hot compression tests of Ti–6Al–4V alloy
104
An experiment study on the Castex process for AS wire
105
An Experiment to Compare the Comprehensibility of Textual and Visual Forms of Algebraic Specifications
106
An Experiment to Evaluate Bayesian Learning of Nash Equilibrium Play
107
An Experiment to Measure Heat Capacity of 3He in Aerogel
108
An experiment to measure λ=GA/GV from a combination of angular correlation coefficients in the beta decay of polarized neutrons
109
An experiment to measure λ=GA/GV from a combination of angular correlation coefficients in the beta decay of polarized neutrons
110
An experiment to re-establish the red-winged grasshopper, Oedipoda germanica (Latr.) (Caelifera: Acrididae), threatened with extinction in Germany
111
An experiment to study cosmic ray protons and nuclei in the 1011–1014 eV energy range (the ‘TUS’ project) Original Research Article
112
An experiment to study CP violation using an internal target at the HERA proton ring
113
An experiment to study solar flare effects on radio-communication signals Original Research Article
114
An Experiment Using Coordinate Title Word Searches
115
An experiment using neutron activation analysis and a rare earth element to mark cotton plants and two insects that feed on them
116
An Experiment Using the High Resolution Eta and WRF Models to Forecast Heavy Precipitation over India
117
An experiment with a plastic solar still Original Research Article
118
An experiment with a single-effect submerged vertical tube evaporator in multi-effect desalination Original Research Article
119
An experiment with different pretreatment methods Original Research Article
120
An experiment with multiple currencies: the American monetary system from 1838–60
121
An experiment with the use of predicate transformers in UNITY
122
An experiment with WWW interactive learning in university education
123
An experimental (120 K) and theoretical electrondensity study of KMnO4 and KClO4
124
An experimental (NMR) and theoretical (GIAO) study of the tautomerism of benzotriazole in solution
125
An experimental adaptation of Higdon-type non-reflecting boundary conditions to linear first-order systems
126
An experimental ambiguity detection tool
127
An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization
128
An experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach
129
AN EXPERIMENTAL ANALYSIS OF A HYBRID BICYCLE FRAME
130
An experimental analysis of a stand-alone standing-wave thermoacoustic refrigerator
131
An experimental analysis of assignment problems and economic rent dissipation in quota managed fisheries
132
An experimental analysis of auctions with interdependent valuations
133
AN EXPERIMENTAL ANALYSIS OF AUTOMOTIVE AIR CONDITIONING SYSTEM
134
An experimental analysis of body checking
135
An experimental analysis of cycling in an automotive air conditioning system
136
An experimental analysis of drawing characteristics of a dual-phase steel through a round drawbead
137
An experimental analysis of fatigue behavior of AZ31B magnesium alloy welded joint based on infrared thermography
138
An experimental analysis of fatigue crack growth under random loading
139
An experimental analysis of fracture mechanisms of short glass fibre reinforced polyamide 6,6 (SGFR-PA66)
140
An experimental analysis of hydrodynamic behaviour on soils and hillslopes in a subtropical mountainous environment (Western Sierra Madre, Mexico)
141
An experimental analysis of hypochondriasis
142
An experimental analysis of illumination intensity and temperature dependency of photovoltaic cell parameters
143
An experimental analysis of joint nesting in the salamander Hemidaetylium scutatum (Caudata: Plethodontidae): the effects of population density
144
An experimental analysis of local minima to improve neighbourhood search
145
An experimental analysis of machining characteristics and parametric optimization for the WEDM of Al/ZrO_2(p) - PRMMC
146
An experimental analysis of membrane bioreactor performances with immobilized chymosin
147
An Experimental Analysis of Nash Refinements in Signaling Games
148
An experimental analysis of PEMFC stack assembly using strain gage sensors
149
An experimental analysis of situation awareness for cockpit display interface evaluation based on flight simulation
150
An experimental analysis of solution performance in a resource sharing and scheduling problem
151
An experimental analysis of subgame perfect play: the entry deterrence game
152
An experimental analysis of territory size in juvenile steelhead trout
153
An experimental analysis of the effects of dietary lipid sources and feeding ration on the reproductive performance, egg and larval quality of Nile tilapia,
154
An experimental analysis of the flow pattern in heat exchangers with an egg carton configuration (parallel, convergent and divergent cases)
155
An experimental analysis of the importance of body-size in the seastar-mussel predator-prey relationship
156
An experimental analysis of the influence of the ink properties on the drop formation for direct thermal inkjet printing of high solid content aqueous 3Y-TZP suspensions
157
An experimental analysis of the role of schema compensation in anorexia nervosa
158
An Experimental Analysis of Vortex Trapping Techniques
159
An Experimental Analysis of Vortex Trapping Techniques
160
An experimental analysis of water leasing markets focusing on the agricultural sector
161
An experimental analysis on mixing and stoking of monodisperse spheres on a grate
162
An experimental analysis on property and structure variations of agricultural wastes undergoing torrefaction
163
An experimental analysis on the evolution of the transient tip penetration in reacting Diesel sprays
164
An experimental and a DFT study on the synthesis, spectroscopic characterization, and reactivity of the adducts of dimethyl- and diphenyltin(IV) dichlorides with γ-pyrones [4H-pyran-4-one (PYR) and 2,6-dimethyl-4H-pyran-4-one (DMP)]: Crystal structure of
165
An experimental and analytical investigation of flange forming by spinning process
166
An Experimental and Analytical Investigation of Novel Nanocomposite Reinforced with Nanoclay with Enhanced Properties for Low Velocity Impact Test
167
An experimental and analytical study of a variable conductance heat pipe: Application to vehicle thermal management
168
An experimental and analytical study of fatigue crack shape control by cold working
169
An Experimental and Analytical Study of Influential Parameters of Parabolic trough Solar Collector
170
An experimental and analytical study of the mechanical behaviour of adhesively bonded joints for variable extension rates and temperatures
171
An experimental and analytical study of the use of bounds to estimate the coupling to a monopole inside a cavity with an aperture
172
An Experimental and Analytical Study on Alccofine Based High Strength Concrete
173
An experimental and analytical study on dome forming of seamless Al tube by spinning process
174
An experimental and analytical study to analyze hydraulic behavior of nozzle-type underdrains in porous media filters
175
An Experimental and CFD Investigation on Effect of Initial Bubble Diameter on its Rise Velocity Profile in A Laboratory-Scale Flotation Column Cell
176
An Experimental and Comparative Analysis of the Battery Charge Controllers in Off-Grid PV Systems
177
An experimental and computational analysis of a MOCVD process for the growth of Al films using DMEAA
178
An experimental and computational approach to the heat transfer mechanism in the cooling channel of a texturing process
179
An experimental and computational investigation of the site selective and lattice driven cycloaddition reactions of SNS+ salts with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone and 1,1,2,2-tetracyanoethylene: Accounting for experimental findings for SNS+ cyc
180
An experimental and computational methodology for near net shape fabrication of thin walled ceramic structures by plasma spray forming
181
An experimental and computational study of compact torus formation, decay and heating in the Berkeley Compact Torus Experiment
182
An experimental and computational study of laminated paperboard creasing and folding
183
An experimental and computational study of multiphase flow behavior in a circulating fluidized bed
184
An experimental and computational study of the aerodynamic and passive ventilation characteristics of small livestock trailers
185
An experimental and computational study of the heat loss characteristics of a trapezoidal cavity absorber
186
An experimental and computational study of wall to bed heat transfer in a bubbling gas–solid fluidized bed
187
An experimental and detailed chemical kinetic modeling study of hydrogen and syngas mixture oxidation at elevated pressures
188
An experimental and DFT analysis of coupling constants in [31P(CH3)nH(4−n)]+ systems where n = 0–4 with a note on [14N(C2H5)4]+ and [31P(C2H5)4]+
189
An experimental and DFT computational study of a novel zerovalent tetracarbonyl tungsten complex of 2-(2′-pyridyl)quinoxaline
190
An experimental and finite element investigation into the energy absorption characteristics of a steering wheel armature in an impact
191
An experimental and first-principles study of the effect of B/N doping in TiO2 thin films for visible light photo-catalysis
192
An experimental and kinetic investigation of premixed furan/oxygen/argon flames
193
An experimental and kinetic modeling study of 2-methyltetrahydrofuran flames
194
An experimental and kinetic modeling study of combustion of isomers of butanol
195
An experimental and kinetic modeling study of cyclohexane pyrolysis at low pressure
196
An experimental and kinetic modeling study of cyclopentadiene pyrolysis: First growth of polycyclic aromatic hydrocarbons
197
An experimental and kinetic modeling study of methyl formate low-pressure flames
198
An experimental and kinetic modeling study of n-butanol combustion
199
An experimental and kinetic modeling study of n-octane and 2-methylheptane in an opposed-flow diffusion flame
200
An experimental and kinetic modeling study of n-propanol and i-propanol ignition at high temperatures
201
An experimental and kinetic modeling study of n-propanol and iso-propanol combustion
202
An experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure
203
An experimental and kinetic modeling study of the autoignition of α-methylnaphthalene/air and α-methylnaphthalene/n-decane/air mixtures at elevated pressures
204
An experimental and kinetic modeling study of the pyrolysis and oxidation of n-C3C5 aldehydes in shock tubes
205
An experimental and kinetic modeling study of three butene isomers pyrolysis at low pressure
206
An experimental and kinetic modelling study of n-butyl formate combustion
207
An experimental and kinetic study of syngas/air combustion at elevated temperatures and the effect of water addition
208
An experimental and mechanistic study on the laminar flame speed, Markstein length and flame chemistry of the butanol isomers
209
An experimental and modeling analysis of vapor transport deposition of cadmium telluride
210
An experimental and modeling based investigation into the high stoichiometric flow rates required in direct methanol fuel cells
211
An experimental and modeling study of 2-methyl-1-butanol oxidation in a jet-stirred reactor
212
An experimental and modeling study of ash deposition behaviour for co-firing peat with lignite
213
An experimental and modeling study of barite deposition in one-dimensional tubes
214
An experimental and modeling study of fires in ventilated ducts. Part II: PMMA and stratification
215
An experimental and modeling study of iso-octane ignition delay times under homogeneous charge compression ignition conditions
216
An experimental and modeling study of isothermal charge/discharge behavior of commercial Ni–MH cells
217
An experimental and modeling study of methyl propanoate pyrolysis at low pressure
218
An experimental and modeling study of NOx and CO emission behaviors of dimethyl ether (DME) in a boiler furnace
219
An experimental and modeling study of propene oxidation. Part 1: Speciation measurements in jet-stirred and flow reactors
220
An experimental and modeling study of propene oxidation. Part 2: Ignition delay time and flame speed measurements
221
An experimental and modeling study of shock tube and rapid compression machine ignition of n-butylbenzene/air mixtures
222
An experimental and modeling study of surrogate mixtures of n-propyl- and n-butylbenzene in n-heptane to simulate n-decylbenzene ignition
223
An experimental and modeling study of the contribution of coal ash to SO2 capture in fluidized bed combustion
224
An experimental and modeling study of the influence of flue gases recirculated on ethylene conversion
225
An experimental and modeling study of the low- and high-temperature oxidation of cyclohexane
226
An experimental and modeling study of the oxidation of acetylene in a flow reactor
227
An experimental and modeling study of the thermomechanical behavior of an ABS polymer structural component during an impact test
228
An experimental and modelling exploration of the host-sanction hypothesis in legume–rhizobia mutualism
229
An experimental and modelling study of a photovoltaic/proton-exchange membrane electrolyser system
230
An Experimental and Modelling Study of Selected Heavy Metals Removal from Aqueous Solution Using Scylla serrata as Biosorbent
231
An experimental and Monte Carlo investigation of the R1408 Hamamatsu 8-inch photomultiplier tube and associated concentrator to be used in the Sudbury Neutrino Observatory
232
An experimental and Monte Carlo investigation of the R1408 Hamamatsu 8-inch photomultiplier tube and associated concentrator to be used in the Sudbury Neutrino Observatory
233
An experimental and numerical analysis for the post-buckling behavior of composite shear webs
234
An experimental and numerical analysis of the HCCI auto-ignition process of primary reference fuels, toluene reference fuels and diesel fuel in an engine, varying the engine parameters
235
An experimental and numerical analysis of the influence of the inlet temperature, equivalence ratio and compression ratio on the HCCI auto-ignition process of Primary Reference Fuels in an engine
236
An experimental and numerical analysis to correlate variation in ductility to defects and microstructure in ductile cast iron components
237
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber
238
An experimental and numerical CFD study of turbulence in a tundish container
239
An Experimental and Numerical Comparison of Flow Hydraulic Parameters in Circular Crested Weir Using Flow3D
240
An experimental and numerical crashworthiness investigation of thermoplastic composite crash boxes
241
An experimental and numerical investigation into the dispersion of powder from a pipe
242
An experimental and numerical investigation of adhesive bonding strengths of polymer materials
243
An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061- T6 Sheets through Single-Point Incremental Forming
244
An experimental and numerical investigation of different shear test configurations for sheet metal characterization
245
An experimental and numerical investigation of flow patterns in the entrance of plate-fin heat exchanger
246
An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit
247
An experimental and numerical investigation of homogeneous ignition in catalytically stabilized combustion of hydrogen/air mixtures over platinum
248
An experimental and numerical investigation of mixed convection from a heat generating element in a ventilated cavity
249
An experimental and numerical investigation of natural convection melting
250
An experimental and numerical investigation of n-heptane/air counterflow partially premixed flames and emission of NOx and PAH species
251
An experimental and numerical investigation of post-CHF heat transfer for one-sided heat load with highly sub-cooled flow boiling
252
An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates
253
An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin–Le Chatelier effect
254
An experimental and numerical investigation on a confined impinging air jet at high Reynolds numbers
255
An experimental and numerical investigation on damping capacity of nanocomposite
256
An experimental and numerical investigation on the cross flow through gas diffusion layer in a PEM fuel cell with a serpentine flow channel
257
An experimental and numerical investigation on the influence of external gas recirculation on the HCCI autoignition process in an engine: Thermal, diluting, and chemical effects
258
An experimental and numerical investigation on torsional strengthening of solid and box-section RC beams using CFRP laminates
259
An experimental and numerical investigation on tyre impact
260
An experimental and numerical study of a 90° bifurcation
261
An experimental and numerical study of a de-fouling evaporator used in a wastewater source heat pump
262
An experimental and numerical study of a laminar triple flame
263
An Experimental and Numerical Study of a Laminar Triple Flame
264
An experimental and numerical study of a miniature high resolution isopotential DMA
265
An experimental and numerical study of a thermoelectric air-cooling and air-heating system
266
An experimental and numerical study of blast induced shock wave mitigation in sandwich structures
267
An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy
268
AN EXPERIMENTAL AND NUMERICAL STUDY OF FLOW PATTERNS AT A 30 DEGREE WATER INTAKE FROM TRAPEZOIDAL AND RECTANGULAR CHANNELS
269
An experimental and numerical study of fluidized bed drying of hazelnuts
270
An experimental and numerical study of forced convection in a microchannel with negligible axial heat conduction
271
An Experimental and Numerical Study of Forming Limit Diagram of Low Carbon Steel Sheets
272
An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression
273
An experimental and numerical study of He II two-phase flow in the TESLA test facility Original Research Article
274
An experimental and numerical study of heat transfer off an inclined surface subject to an impinging airflow
275
An experimental and numerical study of heave added mass and damping of horizontally submerged and perforated rectangular plates
276
An experimental and numerical study of hunting in thermostatic-expansion-valve-controlled evaporators
277
An experimental and numerical study of librationally driven flow in planetary cores and subsurface oceans
278
An experimental and numerical study of necking initiation in aluminium alloy tubes during hydroforming
279
An experimental and numerical study of necking initiation in aluminium alloy tubes during hydroforming
280
An experimental and numerical study of necking initiation in aluminium alloy tubes during hydroforming
281
An experimental and numerical study of particle nucleation and growth during low-pressure thermal decomposition of silane
282
An experimental and numerical study of particle size distribution effects on the sintering of porous ceramics
283
An experimental and numerical study of particle size distribution effects on the sintering of porous ceramics
284
An experimental and numerical study of prestrained AA5754 sheet in bending
285
An experimental and numerical study of stagnation point heat transfer for methane/air laminar flame impinging on a flat surface
286
An experimental and numerical study of surface chemical interactions in the combustion of propylene over platinum
287
An experimental and numerical study of surface tension-driven melt flow
288
An experimental and numerical study of texture change and twinning-induced hardening during tensile deformation of an AZ31 magnesium alloy rolled plate
289
An experimental and numerical study of the angle of repose of coarse spheres
290
An experimental and numerical study of the behaviour of glass fibre reinforced plastics (GRP) short columns at elevated temperatures
291
An experimental and numerical study of the dynamic behaviour of a counter-flow evaporator
292
An experimental and numerical study of the dynamic response of a free–free aluminum beam under high velocity transverse impact
293
An experimental and numerical study of the effect of thickness and length of CFRP on performance of repaired reinforced concrete beams
294
An experimental and numerical study of the effects of dimethyl ether addition to fuel on polycyclic aromatic hydrocarbon and soot formation in laminar coflow ethylene/air diffusion flames
295
An experimental and numerical study of the effects of length scale and strain state on the necking and fracture behaviours in sheet metals
296
An experimental and numerical study of the kinetics of harzburgite reactive dissolution with applications to dunite dike formation
297
An experimental and numerical study of the localization behavior of tantalum and stainless steel
298
An experimental and numerical study of the pattern of cracking of concrete due to steel reinforcement corrosion
299
An experimental and numerical study of the thermal oxidation of chlorobenzene
300
An experimental and numerical study of the vortex filaments in the wake of an operational, horizontal-axis, wind turbine
301
An experimental and numerical study of the vortex structure in the wake of a wind turbine
302
An experimental and numerical study of water jet cleaning process
303
An experimental and numerical study on adhesive joints for composites
304
An experimental and numerical study on an inherent capacity modulated linear compressor for home refrigerators
305
An experimental and numerical study on characteristics of laminar premixed H2/CO/CH4/air flames
306
An experimental and numerical study on dynamic characteristic of linear compressor in refrigeration system
307
An experimental and numerical study on fire suppression using a water mist in an enclosure
308
An experimental and numerical study on fuel atomization characteristics of high-pressure diesel injection sprays
309
An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous media
310
An experimental and numerical study on how steel and polypropylene fibers affect the impact resistance in fiber-reinforced concrete
311
An experimental and numerical study on laser percussion drilling of thick-section alumina
312
An experimental and numerical study on omega stringer debonding
313
An experimental and numerical study on sprays injected from two-hole nozzles for DISI engines
314
an experimental and numerical study on the aerodynamic performance of vibrating wind turbine blade with frequency-domain method
315
An Experimental and Numerical Study on the Bearing Capacity of Circular and Ring Footings on Rehabilitated Sand Slopes with Geogrid
316
An Experimental and Numerical Study on the Effect of Different Types of Sleepers on Track Lateral Resistance
317
An Experimental and Numerical Study on the Effect of Loading Type and Specimen Geometry on Mode-I Fracture Toughness of Rock
318
AN EXPERIMENTAL AND NUMERICAL STUDY ON THE EFFECTS OF TAPER ANGLES AND OVERLAP LENGTH ON THE FAILURE AND STRESS DISTRIBUTION OF ADHESIVELY-BONDED SINGLE-LAP JOINTS
319
An experimental and numerical study on the face milling of Ti–6Al–4V alloy: Tool performance and surface integrity
320
An experimental and numerical study on the formability of textured AlZnMg alloys
321
An experimental and numerical study on the improvement of the performance of Savonius wind rotor
322
An experimental and numerical study on the mechanical behavior of Kunststof Lankhorst Product (KLP) sleepers
323
An Experimental and Numerical Thermal Flow Analysis in a Diffuser by Inserting Different Types of Vortex Generators, Part (I)
324
An experimental and parametric study on steel beams with web openings
325
An experimental and quantum mechanical study on luminescence properties of SM(β-Nbm)3·(Pd)
326
An experimental and quantumchemical study of [2+3] cycloaddition between (Z)-C-(m,m,p-trimethoxyphenyl)-N-(p-methyphenyl)-nitrone and (E)-3,3,3-trichloro-1-nitroprop-1-ene: mechanistic aspects
327
An experimental and quasiclassical study of the product state resolved stereodynamics of the reaction O(1D2) + H2(υ = 0) → OH (X2Π32; υ = 0, N, f) + H
328
An experimental and reduced modeling study of the laminar flame speed of jet fuel surrogate components
329
An experimental and simulating study of supercritical CO2 extraction for pepper oil
330
An experimental and statistical study of interaction effects of matrix particle size, reinforcement particle size and volume fraction on the flexural strength of Al–SiCp composites by P/M using central composite design
331
An experimental and statistical study of the behavior of the vibration field in two coupled lightweight wooden joist floors
332
An Experimental and Theoretical Analysis of Foam Formation in the Sour Gas Sweetening Process
333
An experimental and theoretical analysis of molecular separations by diffusion through ultrathin nanoporous membranes
334
An experimental and theoretical analysis on the application of stress-based forming limit criterion
335
An experimental and theoretical analysis on the application of stress-based forming limit criterion
336
An experimental and theoretical analysis on the application of stress-based forming limit criterion
337
An experimental and theoretical approach for an estimation of ΔKth
338
An experimental and theoretical approach for the biogas steam reforming reaction
339
An experimental and theoretical approach of spectroscopic and structural properties of the bis(diethyldithiocarbamate)–cobalt(II)
340
An experimental and theoretical approach to molecular structure of 4-benzoyl-5-phenyl-1-p-methoxyphenyl-1H-pyrazole-3-carboxylic acid methanol solvate
341
An experimental and theoretical approach to the acid–base and photophysical properties of 3-substituted β-carbolines in aqueous solutions
342
An experimental and theoretical consideration of the effect of prior creep damage on the heat affected zone fracture toughness of CrMoV steel
343
An experimental and theoretical description of the (NH3)n−1{NH3–H–H2O}+ cluster ions produced by fast ion bombardment
344
An experimental and theoretical examination of the effect of sulfur on the pyrolytically grown carbon nanotubes from sucrose-based solid state precursors Original Research Article
345
An experimental and theoretical investigation into the hyperbolic nature of axial dispersion in packed beds
346
An experimental and theoretical investigation into the use of H2 for the simultaneous removal of ArO+ and ArOH+ isobaric interferences during Fe isotope ratio analysis with collision cell based Multi-Collector Inductively Coupled Plasma Mass Spectrometry
347
An experimental and theoretical investigation into the use of H2 for the simultaneous removal of ArO+ and ArOH+ isobaric interferences during Fe isotope ratio analysis with collision cell based Multi-Collector Inductively Coupled Plasma Mass Spectrometry
348
An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foams
349
An experimental and theoretical investigation of the formation of C7H7 isomers in the bimolecular reaction of dicarbon molecules with 1,3-pentadiene
350
An experimental and theoretical investigation of the formation of Zr-containing dispersoids in Al–4.5Zn–1Mg aluminum alloy
351
An experimental and theoretical investigation of the influence of stress state on cavitation during hot working Original Research Article
352
An experimental and theoretical investigation of the photocatalytic degradation of meta-cresol in TiO2 suspensions: a model for the product distribution
353
An experimental and theoretical investigation of the regio- and stereoselectivity of the polar [3+2] cycloaddition of azomethine ylides to nitrostyrenes
354
An experimental and theoretical investigation of the structure and reactivity of bilayered VOx/TiOx/SiO2 catalysts for methanol oxidation
355
An experimental and theoretical investigation of the thermal treatment of wood (Fagus sylvatica L.) in the range 200–260 °C
356
An experimental and theoretical investigation of the transient behavior of a two-phase closed thermosyphon
357
An experimental and theoretical investigation of the triple fragmentation of CFClBr2 by photolysis near 250 nm
358
An experimental and theoretical investigation of the valence shell photoelectron spectrum of cyanogen chloride
359
An experimental and theoretical investigation on hypervalent organoselenium(II) halides: Case study of [2-(Et2NCH2)C6H4]SeX (X = Cl, Br, I)
360
An experimental and theoretical investigation on the swelling of N-isopropyl acrylamide based ionic hydrogels in aqueous solutions of (sodium chloride or di-sodium hydrogen phosphate)
361
An Experimental and Theoretical Investigation on Thermal Performance of a Gas-Liquid Thermosyphon Heat Pipe Heat Exchanger in a Semi-Industrial Plant
362
An experimental and theoretical investigation on torrefaction of a large wet wood particle
363
An experimental and theoretical model for solar UVA-irradiation of soluble eumelanin: towards modelling UVA-photoreactions in the melanosome?
364
An experimental and theoretical model for solar UVA-irradiation of soluble eumelanin: towards modelling UVA-photoreactions in the melanosome?
365
An experimental and theoretical model of children’s search behavior in relation to target conspicuity and spatial distribution
366
An experimental and theoretical reinvestigation of the Michael addition of primary and secondary amines to dimethyl acetylenedicarboxylate
367
An experimental and theoretical study of 1J(13C–14N) coupling constants in nitro-aromatic and nitro-heteroaromatic compounds
368
An experimental and theoretical study of a CO2 ejector
369
An experimental and theoretical study of Coprinus cinereus peroxidase-catalyzed biodegradation of isoelectronic to dioxin recalcitrants
370
An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations Original Research Article
371
An Experimental and Theoretical Study of Gaseous Products in the Radiolysis of Germane/Ethylene Mixtures
372
An experimental and theoretical study of heat and mass transfer during the venting of gas from pressure vessels
373
AN EXPERIMENTAL AND THEORETICAL STUDY OF MASS TRANSFER FROM LOADED EMBOLISATION MICROBEADS: POSSIBLE OPTIMISATION
374
An experimental and theoretical study of molecular structure and vibrational spectra of 2-chloronicotinic acid by density functional theory and ab initio Hartree–Fock calculations
375
An experimental and theoretical study of molecular structure and vibrational spectra of pentafluorophenylboronic acid molecule by density functional theory and ab initio Hartree Fock calculations
376
An experimental and theoretical study of particle deposition due to thermophoresis and turbulence in an annular flow
377
An experimental and theoretical study of solidification in a free-convection flow inside a vertical annular enclosure
378
An experimental and theoretical study of the adsorption of aromatics possessing electron-withdrawing and electron-donating functional groups by chemically modified activated carbons Original Research Article
379
An experimental and theoretical study of the catalytic effect of quaternary ammonium salts on the oxidation of hydrocarbons
380
An experimental and theoretical study of the effect of sample thickness on the Shore hardness of elastomers
381
An Experimental and Theoretical Study of the Effects of Excess Air Ratio and Waste Gate Opening Pressure Threshold on Nox Emission and Performance in a Turbocharged CNG SI Engine
382
An experimental and theoretical study of the effects of heat conduction through the support fiber on the evaporation of a droplet in a weakly convective flow
383
An experimental and theoretical study of the electronic and molecular structure of [Zn4(?4-S){μ-S2P(OC2H5)2}6]: the first molecular model of ZnS
384
An experimental and theoretical study of the electronic spectra of tetraethylammonium [bis(1,3-dithiole-2-thione-4,5-dithiolato)zincate(II)], [NEt4]2[Zn(dmit)2], and tetraethylammonium [bis(1,3-dithiole-2-one-4,5-dithiolato)zincate(II)], [NEt4]2[Zn(dmio)2
385
An experimental and theoretical study of the HNCO+ ion Original Research Article
386
An experimental and theoretical study of the HOMO of W(CO)6: Vibrational effects on the electron momentum density distribution
387
An experimental and theoretical study of the influence of surfactant on the preparation and stability of ammonia-water nanofluids
388
An experimental and theoretical study of the isomerization of mononuclear bis(arylselenolato)bis(triphenylphosphine)platinum complexes [Pt(SeR)2(PPh3)2]
389
AN EXPERIMENTAL AND THEORETICAL STUDY OF THE NONLINEAR HEAT CONDUCTION IN DRY POROUS MEDIA
390
AN EXPERIMENTAL AND THEORETICAL STUDY OF THE NONLINEAR HEAT CONDUCTION IN DRY POROUS MEDIA
391
An experimental and theoretical study of the reaction of ethanethiol with Cl atoms
392
An experimental and theoretical study of the spectroscopic and thermodynamic properties of toluene Original Research Article
393
An experimental and theoretical study of the stress transfer problem in fibrous composites
394
An experimental and theoretical study of the stress transfer problem in fibrous composites Original Research Article
395
An experimental and theoretical study of the valence shell photoelectron spectra of 2-bromothiophene and 3-bromothiophene Original Research Article
396
An experimental and theoretical study of the valence shell photoelectron spectra of thiophene, 2-chlorothiophene and 3-chlorothiophene Original Research Article
397
An experimental and theoretical study of the valence shell photoelectron spectrum of allene Original Research Article
398
An experimental and theoretical study of the valence shell photoelectron spectrum of bromobenzene Original Research Article
399
An experimental and theoretical study of the valence shell photoelectron spectrum of sulphur dioxide Original Research Article
400
An experimental and theoretical study of the valence shell photoelectron spectrum of sulphur hexafluoride Original Research Article
401
An experimental and theoretical study of the valence shell photoelectron spectrum of the benzene molecule Original Research Article
402
An experimental and theoretical study of the valence shell photoelectron spectrum of the chlorobenzene molecule Original Research Article
403
An experimental and theoretical study of toluene pyrolysis with tunable synchrotron VUV photoionization and molecular-beam mass spectrometry
404
An experimental and theoretical study of vibrational spectra of picolinamide, nicotinamide, and isonicotinamide
405
An Experimental and Theoretical Study on Bicyclo-3,4-Dihydropyrimidinone Derivative: Synthesis and DFT Calculation
406
An experimental and theoretical study on concomitant polymorphism of a dithiocarbonimidates derivate in a single space group
407
An experimental and theoretical study on the adsorption behaviors of MHBA ions on silver nano-particles
408
An experimental and theoretical study on the concept of dropwise condensation
409
An experimental and theoretical study on the formation of electric field induced flow shear in the tokamak edge
410
An experimental and theoretical study on the hydration in aqueous medium of the antihypertensive agent tolazoline hydrochloride
411
An experimental and theoretical study on the prediction of forming limit diagrams using new BBC yield criteria and M–K analysis
412
An experimental and theoretical study on the states of PHBA in aqueous solution
413
An Experimental and Theoretical Thermal Analysis of a Simulated CANDU 37-Element Spent Fuel Bundle with Air Backfill
414
An experimental and theoretical vibrational spectra of isoniazide
415
An experimental and three-dimensional numerical study of natural convection heat transfer between two horizontal parallel plates
416
An experimental apparatus for EDXD of high pressure specimens using synchrotron radiation at BSRF
417
An experimental apparatus for EDXD of high pressure specimens using synchrotron radiation at BSRF
418
An experimental appraisal of the Cox–Merz rule and Launʹs rule based on bidisperse entangled polystyrene solutions
419
An experimental approach for direct observation of the interaction of polyanions with sphingosine-containing giant vesicles
420
An experimental approach for the analysis of early-age behaviour of high-performance concrete structures under restrained shrinkage
421
An experimental approach on aerodynamic stability of a cable-stayed cantilever bridge
422
An experimental approach to detecting dementia in Down syndrome: A paradigm for Alzheimer’s disease
423
An experimental approach to improve the basin type solar still using an integrated natural circulation loop
424
An experimental approach to investigate mercury species transformations under redox oscillations in coastal sediments
425
An experimental approach to low-cycle fatigue damage based on thermodynamic entropy
426
An experimental approach to optimize several processing conditions when extruding soybeans
427
An experimental approach to production of peptide-like compounds in the early terrestrial planets
428
An experimental approach to selecting chemical inhibitors to retard the spontaneous combustion of coal
429
An experimental approach to the dynamics of nuclear polarisation
430
An experimental approach to the dynamics of nuclear polarisation
431
An experimental approach to understanding the optical effects of space weathering
432
An experimental approach to valuing new differentiated product
433
An experimental approach to valuing new differentiated products
434
An experimental aquarium for observing the schooling behaviour of Antarctic krill (Euphausia superba)
435
An experimental assessment of buffer width: Implications for salamander migratory behavior
436
An experimental assessment of centrifugal membrane separation using spiral wound RO membrane elements Original Research Article
437
An experimental assessment of combustion, emission, and performance behavior of a diesel engine fueled with newly developed biofuel blend of two distinct waste cooking oils and metallic nano-particle (Al2O3)
438
An experimental assessment of cooling of a 54-rod bundle by in-bundle injection
439
An experimental assessment of friction effects in the split Hopkinson pressure bar using the ring compression test
440
An experimental assessment of grain size effects in the uniaxial straining of thin Al sheet with a few grains across the thickness
441
An experimental assessment of minimum mapping unit size
442
An experimental assessment of module documentation-based testing
443
An experimental assessment of nanostructured materials embedded in a PCMbased heat sink for transient thermal management of electronics
444
AN EXPERIMENTAL ASSESSMENT OF THE EFFICIENCY OF GLAZING TYPES USED AS CLADDING MATERIALS FOR MULTI-STOREY OFFICE BUILDINGS IN GHANA
445
An experimental assessment of the factors influencing Agrobacterium-mediated transformation in tomato
446
An experimental benchmarking of two multi-agent architectures for production scheduling and control^
447
An experimental bone defect healing with hydroxyapatite coating plasma sprayed on carbon/carbon composite implants
448
An experimental calibration of the temperature dependence of oxygen isotope fractionation between apatite and calcite at high temperatures (350–800°C)
449
An experimental characterisation of a Broad Energy Germanium detector
450
An experimental characterisation of a Broad Energy Germanium detector
451
An experimental characterisation of spatial variability in GFRP composite panels
452
An experimental characterization of cross-flow cooling of air via an in-line elliptical tube array
453
An experimental characterization of downwards gas–liquid annular flow by laser-induced fluorescence: Flow regimes and film statistics
454
An experimental characterization of the acoustic fatigue endurance of GLARE and comparison with that of CFRP
455
An experimental clarification of the association of delayed ettringite formation with alkali-aggregate reaction
456
An experimental comparative study of autonomous and co-operative vehicle-follower control systems
457
An experimental comparative study of the technical and economic performance of a small reverse osmosis desalination system equipped with an hydraulic energy recovery unit Original Research Article
458
An Experimental Comparative Study on the Commercial Sports bras Combined with an Electromechanical Modeling
459
An Experimental Comparative Study on the Effect Times of Three Art Based Psychotherapies in a Medical Setting
460
An experimental comparison between rival theories of rapid automatized naming performance and its relationship to reading
461
An Experimental Comparison between Wing Root and Wingtip Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds Number and High Angles of Attack
462
An Experimental Comparison of Audio Tempo Induction Algorithms
463
An experimental comparison of classification algorithms for imbalanced credit scoring data sets
464
An experimental comparison of conservative versus optimal collision avoidance warning system thresholds
465
An experimental comparison of ensemble of classifiers for bankruptcy prediction and credit scoring
466
An experimental comparison of four magnetocaloric regenerators using three different materials
467
An experimental comparison of gas generation from three oil fractions: Implications for the chemical and stable carbon isotopic signatures of oil cracking gas
468
An experimental comparison of gender classification methods
469
An experimental comparison of gradient methods in econometric duration analysis
470
An experimental comparison of gradient methods in econometric duration analysis
471
An experimental comparison of liquid jet array and spray impingement cooling in the non-boiling regime
472
An experimental comparison of methods to use methanol and Jatropha oil in a compression ignition engine
473
An experimental comparison of neural and statistical non-parametric algorithms for supervised classification of remote-sensing images
474
An experimental comparison of n-Heptane, RME and diesel fuel on combustion characteristics in a compression ignition engine
475
An experimental comparison of non-premixed bio-butanol flames with the corresponding flames of ethanol and methane
476
An experimental comparison of performance measures for classification
477
An experimental comparison of several PWM controllers for a single-phase AC-DC converter
478
An Experimental Comparison of Some LLL-Type Lattice Basis Reduction Algorithms
479
An experimental comparison of some recently developed linear programming approaches to the discriminant problem
480
An experimental comparison of strengthening solutions for dowel-type wood connections
481
An Experimental Comparison of the Effectiveness of Cool Colors as Environmental Stimulus on the Elderlies in High-rise Condominiums of Kuala Lumpur
482
An experimental comparison of the focused beamformer and the inverse method for the characterisation of acoustic sources in ideal and non-ideal acoustic environments
483
An experimental comparison of the K- and L-Auger electron spectra generated in the decays of 140Nd and 111In
484
An Experimental Comparison of the Maintainability of Object-Oriented and Structured Design Documents
485
An experimental comparison of the Marcus–Hush and Butler–Volmer descriptions of electrode kinetics applied to cyclic voltammetry. The one electron reductions of europium (III) and 2-methyl-2-nitropropane studied at a mercury microhemisphere electrode
486
An experimental comparison of the sea power injection method and the power coefficient method
487
An experimental comparison of the total-electron-yield and conversion-electron-yield modes for near-surface characterization using X-ray excitation
488
An experimental comparison of transesterification process with different alcohols using acid catalysts
489
An Experimental Comparison of Two Different Technetium Source Activities Which Can Imitate Thyroid Scintigraphy in Case of Thyroid Toxic Nodule
490
An experimental comparison of two preconditioned iterative methods to solve the elliptic partial differential equations
491
An experimental comparison of two preconditioned iterative methods to solve the elliptic partial differential equations
492
An experimental comparison of usage-based and checklist-based reading
493
An experimental comparison of Variable Neighborhood Search variants for the minimization of the vertex-cut in layout problems
494
An experimental confirmation of thermal transitions in native and regenerated spider silks
495
An Experimental Correlation for Friction Factor in Horizontal Pipe with Trapezoidal Section Inner Longitudinal Slots for Conveying of Solids
496
An experimental criterion for the nano-to-bulk phase transition
497
An experimental cyst model established from human unkeratinized vaginal mucosa
498
An Experimental Damage Model and Its Application to the Evaluation of the Excavation Damage Zone
499
An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part I: Experimental facility and material property data
500
An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part II: Experimental, numerical and analytical data
501
An experimental demonstration of direct behavioural interference in two Mediterranean lacertid lizard species
502
An experimental demonstration of stem damage as a predictor of fire-caused mortality for ponderosa pine
503
An experimental demonstration that fear, but not disgust, is associated with return of fear in phobias
504
An experimental design approach employing artificial neural networks for the determination of potential endocrine disruptors in food using matrix solid-phase dispersion
505
An experimental design approach for investigating the effects of operating factors on the wax deposition in pipelines
506
An experimental design approach for optimizing polycyclic aromatic hydrocarbon analysis in contaminated soil by pyrolyser-gas chromatography-mass spectrometry
507
An experimental design approach for the extraction of lemongrass (Cymbopogon citratus) oleoresin using pressurised liquid extraction (PLE)
508
An experimental design approach to investigating the relationship between Internet book reviews and purchase intention
509
An experimental design approach to optimise the determination of polycyclic aromatic hydrocarbons from rainfall water using stir bar sorptive extraction and high performance liquid chromatography-fluorescence detection
510
An experimental design approach to selective laser sintering of low carbon steel
511
An experimental design approach using response surface techniques to obtain optimal liquid chromatography and mass spectrometry conditions to determine the alkaloids in Meconopsi species
512
AN EXPERIMENTAL DESIGN FOR FINDING OF MINIMUM DOSAGE OF CARBAMAZEPINE AND VALPROATE IN PREVENTING OF SEIZURE ATTACKS
513
An experimental design for the controlled modulation of intracellular GSH levels in cultured hepatocytes
514
An experimental design methodology to evaluate the importance of different parameters on flocculation by polyelectrolytes
515
An experimental design to probe the interactions of dissolved organic matter and xenobiotics : Bioavailability of pyrene and 2,2′,5,5′-tetrachlorobiphenyl to Daphnia magna
516
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams
517
An experimental determination of pressure drops in the flow of low density spherical capsule train inside horizontal pipes
518
An experimental determination of the H2S overall mass transfer coefficient from quiescent surfaces at wastewater treatment plants
519
An Experimental Determination of the Laminar Burning Velocities and Extinction Stretch Rates of Benzene/Air Flames
520
An experimental device for the simultaneous estimation of the thermal conductivity 3-D tensor and the specific heat of orthotropic composite materials
521
An experimental device to determine the apparent diffusivities of aroma compounds Original Research Article
522
An experimental ecotoxicological study and its application to the behavioural study of organic mercury (CH3HgCl) in the environment: influence of temperature and pH
523
An experimental effectiveness comparison of methods for 3D similarity search
524
An experimental evaluation and molecular simulation of high temperature gas adsorption on nanoporous carbon Original Research Article
525
An experimental evaluation of a higher-ordered-typed-functional specification-based test-generation technique
526
An experimental evaluation of a residential-sized evaporatively cooled condenser
527
An experimental evaluation of a special ECAP die containing two equal arcs of curvature
528
An experimental evaluation of ablation devices for the local treatment of the liver resection edge
529
An Experimental Evaluation of an Etching Simulation Model for Photochemical Machining
530
An Experimental Evaluation of an Experience-Based Capture-Recapture Method in Software Code Inspections
531
An experimental evaluation of an integrated biomass gasification and power generation system for distributed power applications
532
An experimental evaluation of ash aggregation in explosive volcanic eruptions
533
An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand
534
An experimental evaluation of crack face energy dissipation
535
An experimental evaluation of ensemble methods for EEG signal classification
536
An experimental evaluation of error spectrum shaping applied to mixed-signal image convolutions
537
An experimental evaluation of fatigue crack growth
538
An experimental evaluation of glass–polymer interfacial toughness
539
An experimental evaluation of graphite nanoplatelet based lubricant in micro-milling
540
An experimental evaluation of improving rule based classifiers with two approaches that change representations of learning examples
541
An experimental evaluation of recovery management checkups (RMC) for people with chronic substance use disorders
542
An experimental evaluation of reverse osmosis membrane performance in oily water Original Research Article
543
An experimental evaluation of self-managing availability in shared data spaces
544
An experimental evaluation of Shaw’s paleointensity method and its modifications using Late Quaternary basalts
545
An experimental evaluation of simplicity in rule learning Original Research Article
546
An experimental evaluation of state estimation with fluid dynamical models in process tomography
547
An experimental evaluation of strategic preemption
548
An Experimental Evaluation of Strategies for Reducing Airborne Dust in Desert Cities
549
An experimental evaluation of the accuracy to simulate granule bed compression using the discrete element method
550
AN EXPERIMENTAL EVALUATION OF THE CONSISTENCY OF COMPETITIVE ABILITY AND AGONISTIC DOMINANCE IN DIFFERENT SOCIAL CONTEXTS IN CAPTIVE BONOBOS
551
AN EXPERIMENTAL EVALUATION OF THE CONSISTENCY OF COMPETITIVE ABILITY AND AGONISTIC DOMINANCE IN DIFFERENT SOCIAL CONTEXTS IN CAPTIVE BONOBOS
552
An experimental evaluation of the efficacy of four multi-objective linear programming algorithms
553
An experimental evaluation of the greenhouse effect in R22 substitution
554
An experimental evaluation of the leaching kinetics of PGM-containing Ni–Cu–Fe–S Peirce Smith converter matte, under atmospheric leach conditions
555
An experimental evaluation of the transcritical CO2 refrigerator performances using an internal heat exchanger
556
An experimental evaluation of the vapour compression plant performances in presence of R407C leaks using an electronic expansion valve
557
An experimental evaluation of three critical plane multiaxial fatigue criteria
558
An experimental evaluation of tic suppression and the tic rebound effect
559
An Experimental Examination of Adsorption Phenomenon in Foamassisted Water Alternative Gas: The Effect of Injection Rate
560
An experimental examination of Biswas–Bagchiʹs prediction on the viscosity dependence of the rate of activated barrier surmounting in viscous liquids
561
An experimental examination of double marginalization and vertical relationships
562
An experimental examination of fiber reinforcing effect with a novel composite specimen
563
An experimental examination of rational rent-seeking
564
An experimental examination of subjective forecast combination
565
An experimental examination of the consequences of communal versus solitary breeding on maternal condition and the early postnatal growth and survival of degu, Octodon degus, pups
566
An experimental examination of vertical control and cost predation
567
An experimental feasibility study of vanadium oxide films on metallic bipolar plates for the cold start enhancement of fuel cell vehicles
568
An experimental field study to assess the effectiveness of bait containing the parasitic protozoan Sarcocystis singaporensis for protecting rice crops against rodent damage
569
An experimental field study to evaluate a trap-barrier system and fumigation for controlling the rice field rat, Rattus argentiventer, in rice crops in West Java
570
An experimental fixture for continuous monitoring of electrical effects in moist masonry walls
571
An experimental head restraint concept for primary prevention of head and neck injuries in frontal collisions
572
An experimental health-related classification for marine waters
573
An experimental heat transfer study for helically flowing outside petal-shaped finned tubes with different geometrical parameters
574
An experimental heat transfer study for periodically varying-curvature curved-pipe
575
An experimental heat-transfer study for a heat-recovery unit made of corrugated tubes
576
An experimental helical-tubular photobioreactor for continuous production of Nannochloropsis sp.
577
An experimental identification of line heat sources in a diffusive system using the boundary element method
578
An experimental impact oscillator
579
An experimental in vivo analysis of the resorption to ultrasound activated pins (Sonic weld®) and standard biodegradable screws (ResorbX®) in sheep
580
An experimental inquiry into the application of rules of grammar
581
An experimental integrated absorption heat pump effluent purification system. Part II: operating on water/Carrol solutions
582
An experimental interface design for a single-link elastic manipulator system
583
An experimental introduction of group process support in social services
584
An experimental investigation and characterization on flame bifurcation and leaning transition behavior of a pool fire in near wake of a square cylinder
585
An experimental investigation and correlation on buoyant gas temperature below ceiling in a slopping tunnel fire
586
An experimental investigation and modelling of the solubility, density and surface tension of 1,1,1,3,3-pentafluoropropane (R-245fa)/synthetic polyolester compressor oil solutions
587
An experimental investigation and modelling of the thermodynamic properties of isobutane–compressor oil solutions: Some aspects of experimental methodology
588
An experimental investigation and modelling of the viscosity refrigerant/oil solutions
589
AN EXPERIMENTAL INVESTIGATION AND PARAMETRIC OPTIMIZATION FOR WIRE EDM OF Al-5%ZrO2 PARTICULATE REINFORCED METAL MATRIX COMPOSITE
590
An Experimental Investigation and Prediction of Asphaltene Deposition during Laminar Flow in the Pipes Using a Heat Transfer Approach
591
An experimental investigation and statistical characterization of intermittent flame ejecting behavior of enclosure fires with an opening
592
An experimental investigation and statistical modelling for trim cutting operation in WEDM of Nimonic-90
593
An experimental investigation for cold-state flow field of regenerative heating annular furnace
594
An experimental investigation into batch electrodialysis process for removal of sodium sulfate from magnesium stearate aqueous slurry Original Research Article
595
An experimental investigation into crushing behavior of radially stiffened GFRP composite tubes
596
An experimental investigation into crushing behaviour of filament-wound laminated cone¯cone intersection composite shell
597
An experimental investigation into heat transfer in milk cooling vessels
598
An experimental investigation into hydraulic fracture propagation under different applied stresses in tight sands using acoustic emissions
599
An experimental investigation into impinging forced convection heat transfer from stationary isothermal circular disks
600
An experimental investigation into localised low-velocity impact loading on glass fibre-reinforced polyamide automotive product
601
An experimental investigation into mechanical behavior of hybrid and nonhybrid composite semi-elliptical springs
602
An experimental investigation into natural convection heat transfer from horizontal isothermal circular disks
603
AN EXPERIMENTAL INVESTIGATION INTO SHEAR CAPACITY OF HIGH STRENGTH CONCRETE BEAMS
604
An experimental investigation into status-dependent male dimorphism in the European earwig, Forficula auricularia
605
An experimental investigation into strain distribution in 2D and 3D textile composites
606
An experimental investigation into strain distribution in 2D and 3D textile composites
607
An experimental investigation into the buckling and post-buckling of CFRP shells under combined axial and torsion loading
608
An experimental investigation into the characteristics and deposition mechanism of high-viscosity coal ash
609
An experimental investigation into the CO2 gasification of deactivated activated-carbon catalyst used for methane decomposition to produce hydrogen
610
An experimental investigation into the cutting deformation mode of AA6061-T6 round extrusions
611
An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack
612
An experimental investigation into the dimension-sensitive viscosity of polymer containing lubricant oils in microchannels
613
An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle material
614
An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys
615
An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys
616
An experimental investigation into the effect of process conditions on the mass concentration of cutting fluid mist in turning
617
An Experimental Investigation into the Effects of High Viscosity and Foamy Oil Rheology on a Centrifugal Pump Performance
618
An Experimental Investigation into the Effects of High Viscosity and Foamy Oil Rheology on a Centrifugal Pump Performance
619
An experimental investigation into the evolution of the output of a free electron maser oscillator
620
An experimental investigation into the evolution of the output of a free electron maser oscillator
621
An experimental investigation into the formability of hydroforming 5A02 Al-tubes at elevated temperature
622
An experimental investigation into the formation of polycyclic-aromatic hydrocarbons (PAH) from pyrolysis of biomass materials
623
An experimental investigation into the gasification reactivity and structure of agricultural waste chars
624
An experimental investigation into the gasification reactivity and structure of agricultural waste chars
625
An experimental investigation into the gasification reactivity of chars prepared at high temperatures
626
An experimental investigation into the heat transfer on wing walls in a circulating fluidized bed boiler
627
An experimental investigation into the ignition of leaking hydrogen
628
An experimental investigation into the influence of unsteady wind on the performance of a vertical axis wind turbine
629
An experimental investigation into the integration of a jet-pump refrigeration cycle and a novel jet-spay thermal ice storage system
630
An experimental investigation into the mechanical behaviors of helical composite springs
631
An experimental investigation into the micro-mechanics of spall initiation and propagation in Ti–6Al–4V during shock loading
632
An Experimental Investigation into the Nature of Faceted Limestone “Spheroids” in the Early Palaeolithic
633
An experimental investigation into the operation of a direct contact heat exchanger for solar exploitation
634
An experimental investigation into the oxidation of four pyritic shales from Western Australia
635
An experimental investigation into the pre-treatment of synthetic membranes using sodium hydroxide solutions Original Research Article
636
An experimental investigation into the sound-scattering performance of wooden diffusers with different structures
637
An experimental investigation into the use of a buffered impact damper
638
An experimental investigation into the use of molten carbonate fuel cells to capture CO2 from gas turbine exhaust gases
639
An experimental investigation into the use of scaling laws for predicting vibration responses of rectangular thin plates
640
An experimental investigation into vapor dispersion and solid suspension in boiling stirred tank reactors
641
An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction
642
An experimental investigation of a 3-D solar conical collector performance at different flow rates
643
An experimental investigation of a block moving back and forth on a heat plate under a slot jet
644
An experimental investigation of a different type vapor compression cascade refrigeration system
645
An Experimental Investigation of a FullScale Reinforced Lightweight Aggregate Embankment
646
An experimental investigation of a household size trigeneration
647
An experimental investigation of a mass exchanger for transferring water vapor and inhibiting the transfer of other gases
648
An experimental investigation of a mixed convection in a shape channel subject to a reciprocating motion
649
An experimental investigation of a natural circulation heat pipe system applied to a parabolic trough solar collector steam generation system
650
An experimental investigation of a new hybrid film cooling scheme
651
An experimental investigation of a new method for protecting bends from erosion in gas-particle flows
652
An experimental investigation of a passive cooling unit for nuclear plant containment
653
An experimental investigation of a passive cooling unit for nuclear plant containment Original Research Article
654
An Experimental Investigation of a Passively Flapping Foil in Energy Harvesting Mode
655
An experimental investigation of a PEM fuel cell to supply both heat and power in a solar-hydrogen RAPS system
656
An experimental investigation of a solar chimney model with uniform wall heat flux
657
An experimental investigation of a solar photovoltaic system: economic, environmental, and performance assessment
658
An experimental investigation of a steam ejector refrigerator: the analysis of the pressure profile along the ejector
659
An experimental investigation of a superplastic constitutive equation in Al–Mg–Si alloy composites reinforced with Si3N4 whiskers
660
An experimental investigation of a three-dimensional flat-plate oscillating heat pipe with staggered microchannels
661
An experimental investigation of accounting information’s influence on the individual giving process
662
An experimental investigation of accumulation and transmutation behavior of americium in the MOX fuel irradiated in a fast reactor
663
An experimental investigation of aerosol collection utilizing packed beds of silica aerogel microspheres
664
An experimental investigation of air cooling thermal module using various enhancements at low Reynolds number region
665
An experimental investigation of air flow patterns in saturated soils during air sparging
666
An experimental investigation of an acoustically excited laminar premixed flame
667
An experimental investigation of an ejector for validating numerical simulations
668
AN EXPERIMENTAL INVESTIGATION OF AN INNOVATIVE COUPLING TECHNIQUE OF CONCRETE SHEAR WALLS
669
An experimental investigation of analog delay generation for dynamic control of microsensors and atomic force microscopy
670
An experimental investigation of analog delay generation for dynamic control of microsensors and atomic force microscopy
671
An experimental investigation of analog delay generation for dynamic control of microsensors and atomic force microscopy
672
An experimental investigation of application of radiant cooling in hot humid climate
673
An experimental investigation of aqueous-phase synthesis of magnetite nanoparticles via mechanochemical reduction of goethite
674
An experimental investigation of autogenic behaviour during alluvial fan evolution
675
An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends
676
An experimental investigation of biodiesel synthesis from waste canola oil using supercritical methanol
677
An experimental investigation of blow-out limits for hydrogen–diluent diffusion flames
678
AN EXPERIMENTAL INVESTIGATION OF BOND AND COMPRESSIVE STRENGTH OF CONCRETE WITH MINERAL ADMIXTURES AT HIGH TEMPERATURES
679
An experimental investigation of bubble pump performance for diffusion absorption refrigeration system with organic working fluids
680
An experimental investigation of buoyancy-opposed wall jet flow
681
An Experimental Investigation of Causal Attributions for the Political Behavior of Muslim Candidates: Can a Muslim Represent you?
682
An experimental investigation of change detection in uncertain chain-like systems
683
An experimental investigation of CI engine operated micro-cogeneration system for power and space cooling
684
An experimental investigation of class A surface finish of composites made by the resin transfer molding process
685
An experimental investigation of CNG as an alternative fuel for a retrofitted gasoline vehicle
686
An experimental investigation of cold storage in an encapsulated thermal storage tank
687
An experimental investigation of combined turbulent free and forced evaporation
688
An Experimental Investigation of Conformational Fluctuations in Proteins G and L
689
An experimental investigation of convection heat transfer to supercritical carbon dioxide in miniature tubes
690
An experimental investigation of crack initiation in thin sheets of nitinol Original Research Article
691
An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes
692
An experimental investigation of Curleʹs theory of aerodynamic noise generation by a stationary body in a turbulent air stream
693
An experimental investigation of deformation and fatigue behavior of coach peel riveted joints
694
An Experimental Investigation of Deposition of ZnS Materials on Glass Substrate with SILAR
695
AN EXPERIMENTAL INVESTIGATION OF DIESEL ENGINESFUEL INJECTION PRESSURE EFFECT ON POWERPERFORMANCE AND FUEL CONSUMPTION
696
An Experimental Investigation of Different Formation Waters and Injection Water Incompatibility to Obtain the Optimum Water Mixing Ratio in Injection Processes
697
An experimental investigation of diffusivity and porosity anisotropy of a Chinese gas shale
698
An experimental investigation of distortional buckling of steel storage rack columns
699
An experimental investigation of DSM-IV binge-eating criteria
700
An experimental investigation of dynamic crack growth past a stiff inclusion
701
An experimental investigation of effect on diesel engine performance and exhaust emissions of addition at dual fuel mode of hydrogen
702
An experimental investigation of effects of angular misalignment on flow-induced vibration of simulated CANDU fuel bundles
703
An Experimental Investigation of Effects of Wall Porosity and Suction on the Flow Quality in a Transonic Wind Tunnel
704
An experimental investigation of effusivity as an indicator of powder blend uniformity
705
An experimental investigation of electronic focus groups
706
An experimental investigation of electronic focus groups
707
An experimental investigation of electro-osmotic drag coefficients in a polymer electrolyte membrane fuel cell
708
An Experimental Investigation of Enclosure’s Effect on Noise Reduction in Portable Generators
709
An experimental investigation of ethylene/O2/diluent mixtures: Laminar flame speeds with preheat and ignition delays at high pressures
710
An experimental investigation of evaporation time and the relative humidity on a novel positively charged ultrafiltration membrane via dry–wet phase inversion
711
An experimental investigation of explanations for inconsistencies in responses to second offers in double referenda Original Research Article
712
An experimental investigation of factors influencing predicted success in DSS implementation
713
An experimental investigation of fatigue crack growth of stainless steel 304L
714
An Experimental Investigation of Feasibility of Gas Huff and Puff for Recovering Crude Oil with Different Viscosities
715
AN EXPERIMENTAL INVESTIGATION OF FILM CONDENSATION OF FLOWING MIXTURES OF STEAM AND AIR ON A VERTICAL FLAT PLATE
716
An experimental investigation of film cooling on a convex surface subjected to favourable pressure gradient flow
717
An experimental investigation of film cooling performance of louver scheme
718
An experimental investigation of Fischer–Tropsch synthesis over washcoated metallic structured supports Original Research Article
719
An experimental investigation of fixture–workpiece contact behaviour for the dynamic simulation of complex fixture–workpiece systems
720
An experimental investigation of flow and heat transfer characteristics over blocked surfaces in laminar and turbulent flows
721
An experimental investigation of flow boiling in an asymmetrically heated rectangular microchannel
722
An experimental investigation of flow instability between two heated parallel channels with supercritical water
723
An experimental investigation of fluid flow and wall temperature distributions in an automotive headlight
724
An experimental investigation of foaming in acidic, high FexO slags
725
An experimental investigation of forced convection heat transfer in channels with rib turbulators by means of liquid crystal thermography
726
An experimental investigation of forced convective cooling performance of a microchannel heat sink with Al2O3/water nanofluid
727
An Experimental Investigation of Forces on a Textured Cylinder at Subcritical Reynolds Numbers
728
An experimental investigation of free and submerged miniature liquid jet array impingement heat transfer
729
An experimental investigation of gas-phase combustion synthesis of SiO2 nanoparticles using a multi-element diffusion flame burner
730
an experimental investigation of gravity drainage during immiscible gas injection in carbonate rocks under reservoir conditions
731
AN EXPERIMENTAL INVESTIGATION OF GRAVITY DRAINAGE DURING IMMISCIBLE GAS INJECTION IN CARBONATE ROCKS UNDER RESERVOIR CONDITIONS
732
An experimental investigation of H2 emissions of a 2004 heavy-duty diesel engine supplemented with H2
733
An experimental investigation of HA/AL2O3 nanoparticles on mechanical properties of restoration materials
734
An experimental investigation of heat transfer and friction losses of interrupted and wavy fins for fin-and-tube heat exchangers
735
An experimental investigation of heat transfer enhancement for a shell-and-tube heat exchanger
736
An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger
737
An experimental investigation of heat transfer performance in a polydimethylsiloxane (PDMS) oscillating heat pipe
738
An Experimental Investigation of Heat-Transfer Tubes with Cellular Finning
739
An Experimental Investigation of Heat-Transfer Tubes with Cellular Finning
740
An experimental investigation of hot spots in railway disc brakes
741
An experimental investigation of hot-machining to predict tool life
742
An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane
743
An experimental investigation of hydrogen-enriched air induction in a diesel engine system
744
An experimental investigation of hydrogen-enriched gasoline in a Wankel rotary engine
745
An experimental investigation of hydroxyl solubility in jadeite and Na-rich clinopyroxenes
746
An experimental investigation of incomplete combustion of gaseous fuels of a heavy-duty diesel engine supplemented with hydrogen and natural gas
747
An experimental investigation of incremental reactivities of volatile organic compounds
748
An experimental investigation of in-plane constraint effect on local fracture resistance of a dissimilar metal welded joint
749
An experimental investigation of iso-octane ignition phenomena
750
An experimental investigation of jet flows through a row of forward expanded holes into a mainstream over a concave surface
751
An experimental investigation of laminar–turbulent transition in complex fluids Original Research Article
752
An experimental investigation of large amplitude reversible square wave voltammetry
753
An experimental investigation of large-strain tensile behavior of a metal sheet
754
An Experimental Investigation of Laser Cladding
755
An experimental investigation of Li and SF6 wick combustion
756
An experimental investigation of liquid metal thermal joint
757
An experimental investigation of LNAPL migration in an unsaturated/saturated sand
758
An experimental investigation of local fracture resistance and crack growth paths in a dissimilar metal welded joint
759
An experimental investigation of loop-seal operation in an interconnected circulating fluidized bed system
760
An experimental investigation of L-valve operation in an interconnected circulating fluidized bed system
761
An Experimental Investigation of Magnetized Water Effect on Formation Damage
762
An experimental investigation of melting of nanoparticle-enhanced phase change materials (NePCMs) in a bottom-heated vertical cylindrical cavity
763
An experimental investigation of microchannel flow with internal pressure measurements
764
An experimental investigation of mixing of wood pellets on a forward acting grate in discontinuous operation
765
An experimental investigation of moisture absorption and condensation in fibrous insulations under low temperature
766
An experimental investigation of motion control devices for truss spars
767
An experimental investigation of NAPL pool dissolution enhancement by flushing
768
An experimental investigation of natural convection with solidification in a differentially heated cavity
769
An experimental investigation of NO2 emission characteristics of a heavy-duty H2-diesel dual fuel engine
770
An experimental investigation of nonlinear vibration and frequency response analysis of cantilever viscoelastic beams
771
An experimental investigation of nucleate boiling heat transfer from an enhanced cylindrical surface
772
An experimental investigation of nucleation probability of supercooled water inside cylindrical capsules
773
An experimental investigation of odd beliefs: individual differences in non-normative belief conviction
774
An Experimental Investigation of Optimal Learning in Coordination Games
775
An experimental investigation of overdissipation in the all pay auction
776
An Experimental Investigation of Palm Pressed Fibre Waste as Lubricant in Strip Drawing
777
An Experimental Investigation of Parabolic Trough Collector using Industrial-grade Multiwall Carbon Nanotube- H2O Based Nanofluid
778
An experimental investigation of particle fragmentation using single particle impact studies
779
An experimental investigation of Perkins A63544 diesel engine performance using D-Series fuel
780
An Experimental Investigation of Phase Transition in a Superionic Mixed Composite System of [Cu2HgI4:0.2 AgI] Doped with KBr
781
An experimental investigation of phase transformation superplastic diffusion bonding of titanium alloy to stainless steel
782
An experimental investigation of piston skirt scuffing: a piston scuffing apparatus, experiments, and scuffing mechanism analyses
783
An experimental investigation of pneumatic swirl flow induced by a three lobed helical pipe
784
An experimental investigation of pulsatile flow through a smooth constriction
785
An experimental investigation of rate-dependent deformation and failure of three titanium alloys
786
An experimental investigation of reaction zone controls on fluid flow and mass transport
787
An Experimental Investigation of Reactive Absorption of Carbon Dioxide into an Aqueous NH3/H2O/NaOH Solution
788
An experimental investigation of residual stresses in an epoxy–steel laminate
789
An experimental investigation of revealed environmental concern
790
An experimental investigation of reverse vortex flow plasma reforming of methane
791
An experimental investigation of rheological characteristics of non-Newtonian nanofluids
792
An experimental investigation of roll waves in high pressure two-phase inclined pipe flows
793
An experimental investigation of scanner data preparation strategies for consumer choice models
794
An experimental investigation of scrubber internals at conditions of low pressure
795
An experimental investigation of self-excitation in capacitor excited induction generators
796
An experimental investigation of sewage sludge gasification in near and super-critical water using a batch reactor
797
An experimental investigation of shock wave propagation in periodically layered composites
798
An experimental investigation of sill formation and propagation in layered elastic media
799
An experimental investigation of some KLL and L3MM Auger transitions for Z=58, 59, and 61: the predicted relativistic effects on the KL1L2(3P0) Auger transition probability proved
800
An experimental investigation of some KLL and L3MM Auger transitions for Z=58, 59, and 61:: the predicted relativistic effects on the KL1L2(3P0) Auger transition probability proved
801
An experimental investigation of sootshell formation in microgravity droplet combustion
802
An Experimental Investigation of Spark Ignition Engine Fueled with Ethanol/Iso-octane and Methanol/Iso-octane Fuel Blends
803
An Experimental Investigation of Spark Plug Temperature inBi-fuel Engine and Its Effect on Electrode Erosion
804
An experimental investigation of spontaneous imbibition in gas shales
805
An experimental investigation of stability and operation of a biogas fueled porous burner
806
An experimental investigation of static and fatigue behaviour of sandwich composite panels joined by fasteners
807
An experimental investigation of steel surface characteristic transfer by cold rolling
808
An experimental investigation of streaming potentials through homogeneous ion-exchange membranes Original Research Article
809
An Experimental Investigation of Synergistic Pulsation Bubble Column with Inverse Fluidized Loop Reactor for Removing Chloroform from Wastewater
810
AN EXPERIMENTAL INVESTIGATION OF TEMPERATURE AND PRESSURE OSCILLATION IN THE BOILING OF LIQUID HELIUM
811
An experimental investigation of tetrabromobisphenol A decomposition pathways
812
An experimental investigation of texture evolution during continuous cooling
813
AN EXPERIMENTAL INVESTIGATION OF THE AEROACOUSTICS OF A TWO-DIMENSIONAL BIFURCATED SUPERSONIC INLET
814
An experimental investigation of the air entrainment in the shutdown cooling system during mid-loop operation
815
An experimental investigation of the automatic/voluntary dissociation in limb apraxia
816
An experimental investigation of the bearing strength of weft-knitted 1 × 1 rib glass fiber composites
817
An experimental investigation of the behaviour of steels over large temperature and strain rate ranges
818
An experimental investigation of the behaviour of steels over large temperature and strain rate ranges
819
An experimental investigation of the bolt clamping force and friction effect on the fatigue behavior of aluminum alloy 2024-T3 double shear lap joint
820
An experimental investigation of the capsule velocity, concentration rate and the spacing between the capsules for spherical capsule train flow in a horizontal circular pipe
821
An Experimental Investigation of the Catalytic Effect of Fe2O3 Nanoparticle on Steam Injection Process of an Iranian Reservoir
822
An experimental investigation of the characteristics of and conditions for brittle fracture in two-dimensional soil cutting
823
An experimental investigation of the cognitive vulnerability to depression
824
An experimental investigation of the combustion of technical tetrachlorobenzene in a laboratory scale incinerator
825
An experimental investigation of the combustion process of a heavy-duty diesel engine enriched with H2
826
An experimental investigation of the development and permeability of clay smears along faults in uncemented sediments
827
An Experimental Investigation Of The Direct Initiation Of Cylindrical Detonations
828
An experimental investigation of the diversion characteristics of foam in Berea sandstone cores of contrasting permeabilities
829
An experimental investigation of the double ionization of hydrogen sulphide to triplet electronic states of the dication
830
An Experimental Investigation of the Effect of Age and Sex/Gender on Pain Sensitivity in Healthy Human Participants
831
An experimental investigation of the effect of biaxial loading on the master curve transition temperature in RPV steels
832
An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy
833
An experimental investigation of the effect of longitudinal fin orientation on heat transfer in membrane water wall tubes in a circulating fluidized bed
834
An experimental investigation of the effect of nose shape on fragments penetrating GFRP
835
An experimental investigation of the effect of random G-jitter on a liquid-bridge
836
An experimental investigation of the effect of rotation on the rate of unimolecular decomposition of NO2
837
An experimental investigation of the effect of shading with plants for solar control of buildings
838
An experimental investigation of the effect of shear-induced diffuse damage on transverse cracking in carbon-fiber reinforced laminates
839
An experimental investigation of the effect of the injection pressure on engine performance and exhaust emission in indirect injection diesel engines
840
AN EXPERIMENTAL INVESTIGATION OF THE EFFECT OF THE MULTI VORTEX GENERATOR FOR DRAG REDUCTION IN A UTILITY VEHICLE
841
An experimental investigation of the effect of the placement angle on the collapse of ice screw anchors
842
An experimental investigation of the effect of using non-Newtonian nanofluid-graphene oxide/aqueous solution of sodium carboxymethyl cellulose-on the performance of direct absorption solar collector
843
An experimental investigation of the effective parameters on wet washing of biodiesel purification
844
An Experimental Investigation of the Effects of Canard Position on the Aerodynamic Forces ofaFighter Type Configuration Model
845
An Experimental Investigation of the Effects of Diesel Fuel Injection Characteristics in a Heavy-Duty Direct Injection (HDDI) Diesel Engine
846
An Experimental Investigation of the Effects of Fiber Laser Percussion Drilling: Influence of Process Parameters
847
An experimental investigation of the effects of gas solubility on the properties of horizontal slug flow
848
An experimental investigation of the effects of hot runner system on injection moulding process in comparison with conventional runner system
849
An experimental investigation of the effects of nitrogen deposition to Narthecium ossifragum Original Research Article
850
An experimental investigation of the effects of operating parameters on the wear of lifters in tumbling mills
851
An experimental investigation of the effects of turbulence generators attached to an axial swirler nozzle on mixing and combustion
852
An experimental investigation of the enhanced oil recovery and improved performance of drilling fluids using titanium dioxide and fumed silica nanoparticles
853
An experimental investigation of the expression of genericity in English, Spanish and Brazilian Portuguese
854
An experimental investigation of the fatigue behavior of sisal fibers
855
An experimental investigation of the flow field pattern within the impeller of a cross-flow fan
856
An experimental investigation of the flow structure over a corrugated waveform in a transpired air collector
857
An experimental investigation of the frictional pressure drop of steam–water two-phase flow in helical coils
858
AN EXPERIMENTAL INVESTIGATION OF THE GROWTH OF SMALL CORNER FATIGUE CRACKS IN ALUMINIUM 6061-T651
859
An Experimental Investigation of the Hahn-Noll Revenue Neutral Auction for Emissions Licenses
860
An experimental investigation of the impact of aggregation on the performance of data mining with logistic regression
861
An experimental investigation of the impact of aggregation on the performance of data mining with logistic regression
862
An experimental investigation of the impact of biological and psychological causal explanations on anxious and depressed patients’ perception of a person with panic disorder
863
An experimental investigation of the impact of domain complexity on knowledge acquisition (KA) methods
864
An experimental investigation of the impact of the Lidcombe Program on early stuttering
865
An experimental investigation of the impact response of composite laminates
866
An Experimental Investigation of the Incentives to Form Agricultural Marketing Pools,
867
An experimental investigation of the influence of salinity and cryogenic structure on the dispersion of oil and oil products in frozen soils
868
An experimental investigation of the influence of the Bauschinger effect on springback predictions
869
An experimental investigation of the in-situ combustion behavior of Karamay crude oil
870
An experimental investigation of the large-strain tensile behavior of neat and rubber-toughened polycarbonate
871
An experimental investigation of the lodging of wheat
872
An experimental investigation of the motion of single bubbles under a slightly inclined surface
873
An experimental investigation of the optical switching characteristics using an optical Sagnac interferometer incorporating one and two ring resonators
874
An experimental investigation of the optimum geometry for the cold end orifice of a vortex tube
875
An experimental investigation of the performance and gaseous exhaust emissions of a diesel engine using blends of a vegetable oil
876
An experimental investigation of the performance of a thermionic converter with planar molybdenum electrodes for low temperature applications
877
An experimental investigation of the port flow maldistribution in small and large plate package heat exchangers
878
An experimental investigation of the properties of cross-ply laminate used for manufacturing of small aircraft components
879
An experimental investigation of the recirculation zone formed downstream of a forward facing step
880
An experimental investigation of the redistribution behaviour of alkyl ketene dimers and their corresponding ketones
881
An experimental investigation of the relativistic effects on the KL1L2(3P0) Auger transition rate of 131Xe
882
An experimental investigation of the role of appraisal processes in adolescents and their mothers experiencing family conflict
883
An experimental investigation of the role of safety-seeking behaviours in the maintenance of panic disorder with agoraphobia
884
An experimental investigation of the scratch behaviour of polymers: 1. Influence of rate-dependent bulk mechanical properties
885
An experimental investigation of the sequence effect in block amplitude loading of cross-ply composite laminates
886
AN EXPERIMENTAL INVESTIGATION OF THE SOUNDS OF SILENCE METAHEURISTIC FOR THE MULTI-MODE RESOURCE-CONSTRAINED PROJECT SCHEDULING WITH PRE-OPTIMIZED REPERTOIRE ON THE HARDEST MMLIB+ SET
887
An Experimental Investigation of the Survivability and Friction Characteristics of Tin-Coated and Polymer-Laminated Steels
888
An Experimental Investigation of the Survivability and Friction Characteristics of Tin-Coated and Polymer-Laminated Steels
889
An experimental investigation of the theory of electrostatic deflections
890
An experimental investigation of the thermal performance of an asymmetrical flat plate heat pipe
891
An experimental investigation of the thermal performance of an asymmetrical flat plate heat pipe: [International Journal of Heat and Mass Transfer 43 (2000) 2657–2668]
892
An experimental investigation of the vortex-excited vibrations of pivoted tapered circular cylinders in uniform and shear flow
893
An experimental investigation of the wind environment and air quality within a densely populated urban street canyon
894
An experimental investigation of thermal contact conductance across bolted joints
895
An experimental investigation of thermal contact conductance of Hastelloy C-276 based on steady-state heat flux method
896
An experimental investigation of thermal contact conductance of stainless steel at low temperatures Original Research Article
897
An experimental investigation of thermal mixing and combustion in supersonic flows
898
An experimental investigation of thermoacoustic instabilities in a premixed swirl-stabilized flame
899
An experimental investigation of thermo-physical properties and heat transfer performance of Al2O3-Aviation Turbine Fuel nanofluids
900
An experimental investigation of through-thickness electrical resistivity of CFRP laminates
901
An experimental investigation of trace element dissolution in carbon dioxide: Applications to the geological storage of CO2
902
An Experimental Investigation of Turbulent Forced-Convection into a Horizontal Finned Eccentric Annulus
903
An experimental investigation of ultimatum games: information, fairness, expectations, and lowest acceptable offers
904
An Experimental Investigation of Unprofitable Games
905
An experimental investigation of unsteady surface pressure on an airfoil in turbulence—Part 1: Effects of mean loading
906
An experimental investigation of unsteady surface pressure on an airfoil in turbulence—Part 2: Sources and prediction of mean loading effects
907
An experimental investigation of unsteady turbulent-wake/boundary-layer interaction
908
An experimental investigation of wage taxation and unemployment in closed and open economies
909
An experimental investigation of water droplet impingement on a heated wax surface
910
An Experimental Investigation of Water Effects on Asphaltene Surface Behavior through Interfacial Tension Measurements
911
An experimental investigation of wear of glass fibre–epoxy resin and glass fibre–polyester resin composite materials
912
An experimental investigation of wettability alteration during CO2 immiscible flooding
913
An Experimental Investigation of Wettability Alteration in Carbonate Reservoir Using γ-Al2O3 Nanoparticles
914
An experimental investigation of white layer on rolling contact fatigue using acoustic emission technique
915
An experimental investigation of why individuals conform
916
An experimental investigation on a crack propagating from a geartrain housing in an asphalt milling machine
917
An experimental investigation on a DI diesel engine using waste plastic oil with exhaust gas recirculation
918
An experimental investigation on a fluidized motion conveying system
919
An experimental investigation on a novel high-performance integrated heat pipe–heat sink for high-flux chip cooling
920
An experimental investigation on barreling of aluminium alloy billets during extrusion forging using different lubricants
921
An experimental investigation on behaviour of coal under fluid saturation, using acoustic emission
922
An experimental investigation on bending stiffness and neutral axis depth variation of over-reinforced high strength concrete beams
923
An Experimental Investigation on Black Cotton Soil using Terrazyme
924
An experimental investigation on capillary pumped loop with the meshes wick
925
An experimental investigation on column flotation circuit configuration
926
An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
927
An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
928
An experimental investigation on composite fretting mode
929
An experimental investigation on contact length during minimum quantity lubrication (MQL) machining
930
An experimental investigation on corona quenching
931
An experimental investigation on crack effect on the mechanical behavior and energy absorption of thin-walled tubes
932
An experimental investigation on critical specimen sizes of high strength steels DP600 in resistance spot welding
933
An experimental investigation on cut surface and burr in trimming aluminum autobody sheet
934
An experimental investigation on cut surface and burr in trimming aluminum autobody sheet
935
An experimental investigation on cut surface and burr in trimming aluminum autobody sheet
936
An experimental investigation on cyclic plastic deformation and substructures of polycrystalline copper
937
An experimental investigation on DI diesel engine with hydrogen fuel
938
An experimental investigation on diffusion of water in haplogranitic melts
939
An experimental investigation on dimensional stability of injected wax patterns of gas turbine blades
940
An Experimental Investigation on Drag Reduction by a Combination of Polymer, Laurel Soap, and Palm Fiber Through Circulated Newtonian Liquid
941
An experimental investigation on drying kinetics of calcium carbonate
942
An Experimental Investigation on Durability Properties of Reactive Powder Concrete
943
An experimental investigation on dynamic analysis of high speed carbon–epoxy shaft in aerostatic conical journal bearings
944
An experimental investigation on effects of an electric field on bubble growth on a small heater in pool boiling
945
An experimental investigation on engine performance and emissions of a single cylinder diesel engine using hydrogen as inducted fuel and diesel as injected fuel with exhaust gas recirculation
946
An experimental investigation on engine performance and emissions of a supercharged H2-diesel dual-fuel engine
947
An experimental investigation on engine speed and cyclic dispersion in an HCCI engine
948
An experimental investigation on equilibrium moisture content of earth plaster with natural reinforcement fibres for straw bale buildings
949
An experimental investigation on fatigue crack growth of AL6XN stainless steel
950
An experimental investigation on flow boiling heat transfer enhancement using spray pyrolysed alumina porous coatings
951
An experimental investigation on forced convection heat transfer performance in micro tubes by the method of liquid crystal thermography
952
An Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
953
An experimental investigation on freckles formation during solidification of aqueous ammonium chloride
954
An experimental investigation on frictional behavior of statically loaded micro-grooved journal bearing
955
An experimental investigation on heat transfer characteristics of multi-walled CNT-heat transfer oil nanofluid flow inside flattened tubes under uniform wall temperature condition
956
An experimental investigation on hydrodynamics of charged water droplets in dielectric liquid medium in the presence of electric field
957
An experimental investigation on hydrogen as a dual fuel for diesel engine system with exhaust gas recirculation technique
958
AN EXPERIMENTAL INVESTIGATION ON IMPROVING THE MEDIUM AND LATE-AGE COMPRESSIVE STRENGTHS OF CLASS G OIL WELL CEMENT
959
An experimental investigation on liquefaction potential and post-liquefaction shear strength of impounded fly ash
960
An experimental investigation on low-velocity impact response of nanoclay-reinforced fiber metal laminates
961
An experimental investigation on mass failures occurring in a riverbank composed of sandy gravel
962
An experimental investigation on methanol steam reforming with oxygen addition in a flat Pd–Ag membrane reactor
963
An experimental investigation on penetration of buoyancy-driven cold liquid into a vertical channel with hot, forced-flow Original Research Article
964
An experimental investigation on performance and emissions study with port injection using diesel as an ignition source for different EGR flow rates
965
An experimental investigation on performance of bubble pump with lunate channel for absorption refrigeration system
966
An experimental investigation on pressure drop of steam condensing in silicon microchannels
967
An experimental investigation on properties of geopolymer concrete (no cement concrete)
968
AN EXPERIMENTAL INVESTIGATION ON RADIANT FLOOR HEATING SYSTEMS AT VARIOUS OPERATING CONDITIONS
969
An experimental investigation on reverse-cycle defrosting performance for an air source heat pump using an electronic expansion valve
970
An experimental investigation on shear behaviour of RC T-beams strengthened with CFRP using photogrammetry
971
An experimental investigation on simultaneous eff ects of oxygen ratio and fl ow-rate in SOFCs performance fueled by a mixture of methane and oxygen
972
An experimental investigation on strain hardening behaviour of aluminium – 3.5% alumina powder metallurgy composite preform under various stress states during cold upset forming
973
An Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining
974
An experimental investigation on temperature distribution in high-speed milling of AZ91C magnesium alloy
975
An experimental investigation on temperature profile of buoyant spill plume from under-ventilated compartment fires in a reduced pressure atmosphere at high altitude
976
AN EXPERIMENTAL INVESTIGATION ON THE ACOUSTIC EXCITATION OF A THIN PLATE BY LOW-SPEED JETS
977
An experimental investigation on the aerodynamic performances of flexible membrane wings in flapping flight
978
An experimental investigation on the combined use of phase change material and rock particles for high temperature (∼350 °C) heat storage
979
An experimental investigation on the deformation behavior during wire flat rolling process
980
An experimental investigation on the directional distribution of incident energy for the prediction of sound transmission loss
981
An experimental investigation on the dynamic ultimate compressive strength of ship plating
982
An experimental investigation on the effect of acid treatment of MWCNTs on the viscosity of water-based nanofluids and statistical analysis of viscosity in prepared nanofluids
983
An experimental investigation on the effect of convection on the ignition behaviour of single coal particles under various O2 concentrations
984
An experimental investigation on the effect of multi-angle filament winding on the strength of tubular composite structures
985
An experimental investigation on the effect of pH variation of MWCNT–H2O nanofluid on the efficiency of a flat-plate solar collector
986
An experimental investigation on the effect of rock strength and perforation size on sand production
987
An experimental investigation on the effect of short time exposure to elevated temperature on fatigue life of cold expanded fastener holes
988
An experimental investigation on the effect of strain rate on the behaviour of bare and foam-filled aluminium honeycombs
989
An experimental investigation on the effects of severely plastic deformation process on the mechanical properties of automotive resistance spot welded aluminum joints
990
An experimental investigation on the energy storage in a shape-memory-polymer system
991
An experimental investigation on the fabrication of W-Cu composite through hot-press
992
An experimental investigation on the failure of rectangular plate under wedge impact
993
An experimental investigation on the flow structure and mixture formation of low pressure ratio wall-impinging jets by a natural gas injector
994
An experimental investigation on the FPZ properties in concrete using digital image correlation technique
995
An experimental investigation on the gravity assisted solar heat pipe under the climatic conditions of Tunisia
996
An experimental investigation on the impact behavior of hybrid composite plates
997
An experimental investigation on the impact response of composite materials
998
An experimental investigation on the influence of NaCl on the solubility of CO2 in (N,N-dimethylmethanamide + water)
999
An experimental investigation on the influence of NaCl on the solubility of CO2 in (water + phenol)
1000
An experimental investigation on the integration of two-stage dehumidification and regenerative evaporative cooling
