<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Investigation on damage of BSA molecules under irradiation of low frequency ultrasound in the presence of FeIII-tartrate complexes
2
Investigation on damage of DNA molecules under irradiation of low frequency ultrasound in the presence of hematoporphyrin–gallium (HP–Ga) complex
3
Investigation on damage of DNA molecules under irradiation of low frequency ultrasound in the presence of hematoporphyrin–gallium (HP–Ga) complex
4
Investigation on Daylight Quality of Central Courtyard’s Adjacent Rooms in Traditional Houses in Hot Dry Region of Iran: A Case Study Yazdanpanah House
5
Investigation on defect distribution and its statistical evaluation for case hardened material states
6
Investigation on deformation behavior of sheet metals in viscous pressure bulging based on ESPI
7
Investigation on degradation mechanism of ion exchange membrane immersed in highly concentrated tritiated water under the Broader Approach Activities
8
Investigation on degradation of dyestuff wastewater using visible light in the presence of a novel nano TiO2 catalyst doped with upconversion luminescence agent
9
Investigation on degradation of polyethylene to oil in a continuous supercritical water reactor
10
Investigation on degradation of polyethylene to oils in supercritical water
11
Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads
12
Investigation on Determinants and Choice of Contraceptive Usage among Nigeria Women of Reproductive Age
13
Investigation on determination of loading path to enhance formability in tube hydroforming process using APDL
14
INVESTIGATION ON DETERMINING THE COEFFICIENT OF THERMAL CONDUCTIVITY TO TEXTILE MATERIALS RECOVERABLE, USED FOR THERMAL PROTECTION OF HOT PIPELINES
15
Investigation on development of free-surface structures in turbulent liquid lithium flow
16
Investigation on dielectric properties of the polyetherketone nanocomposite with lead titanate ultrafines
17
Investigation on dielectric relaxations of PVP–NH4SCN polymer electrolyte
18
Investigation on different ESD protection strategies devoted to 3.3 V RF applications (2 GHz) in a 0.18 μm CMOS process
19
Investigation on different oxides as candidates for nano-sized ODS particles in reduced-activation ferritic (RAF) steels
20
Investigation on diffusion bonding characteristics of aluminum metal matrix composites (Al/SiCp) with pure aluminum for different heat treatments
21
Investigation on diffusion bonding of functionally graded WC–Co/Ni composite and stainless steel
22
Investigation on Digital Algorithm for On-Line Monitoring and Diagnostics of Metal Oxide Surge Arrester Based on an Accurate Model
23
Investigation on disassociation of porphyrin J-aggregates induced by β-cyclodextrins using absorption and fluorescence spectroscopy
24
Investigation on dispermic androgenesis in sturgeon fish. The first successful production of androgenetic sturgeons with cryopreserved sperm
25
Investigation on dispersion of optical constants of Gd2O3 films by phase modulated spectroscopic ellipsometry
26
Investigation on dispersive optical constants and electrical properties of CuIn5S8 thin films
27
Investigation on distribution of airborne fungi in outdoor environment in Tehran, Iran
28
Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy
29
Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy
30
INVESTIGATION ON DOPPLER SPECTRAL CHARACTERISTICS OF ELECTROMAGNETIC BACKSCATTERED ECHOES FROM DYNAMIC NONLINEAR SURFACES OF FINITE-DEPTH SEA
31
Investigation on downwind short-range transport of pesticides after application in agricultural crops
32
Investigation on Dracaena Sanderiana PhytoremeDiation Ability for Hg and Cd using Multivariate Optimized Task Specific Ionic liquid-based Dispersive liquid-liquid Microextraction
33
Investigation on drag characteristics of heavy oil flowing through horizontal pipe under the action of aqueous foam
34
Investigation on droplet impingement erosion during steam generator tube failure accident
35
Investigation on drying of middle distillate by Pervaporation Original Research Article
36
Investigation on Durability of Copper Nano Particles on Cotton Fiber
37
Investigation on dynamic performance and parameter optimization design of pantograph and catenary system
38
Investigation on dynamic recrystallization using a modified cellular automaton
39
Investigation on dynamics of double emulsion droplet in a uniform electric field
40
Investigation on early hydration of ternary Portland cement-blast-furnace slag–metakaolin blends
41
Investigation on effect of ambient pressure in wire explosion process for synthesis of copper nanoparticles by optical emission spectroscopy
42
Investigation on effect of methylene spacer in holographic grating formation in eosin containing polymethacrylates
43
Investigation on effect of surface topography of pad/disc assembly on squeal generation
44
Investigation on Effect of Train Speed in Displacement of Railway Ballasted Track with Unsupported Sleepers
45
Investigation on effect of using rubber as core material in sandwich composite plate subjected to low velocity normal and oblique impact loading
46
Investigation on effect of wheat residue management using different tillage and nitrogen fertilizer on maize yield in the north of khuzestan
47
Investigation on effect of Yttria Stabilized Zirconia coated piston crown on performance and emission characteristics of a diesel engine
48
Investigation on effective factors in drying time Iranian rice varieties in fluidized bed dryer
49
Investigation on Effectiveness of Suggestion System Settlement in Yazd Gas Company and Method Offered for Developing Improvement
50
Investigation on Effects of Calcium Nitrate, Calcium Sulfate (soil application) and Calcium chelate as Foliar spray on Endocarp Lesion Disorder and Some Qualitative Characteristics of pistachio nut Cv
51
Investigation on Effects of Environmental and Soil Factors on Establishment of Vegetation Types (Case Study: Sabzdasht, Bafgh)
52
Investigation on effects of surface morphologies on response of LPG sensor based on nanostructured copper ferrite system
53
Investigation on electrical transport, CO sensing characteristics and mechanism for nanocrystalline La1−xCaxFeO3 sensors
54
Investigation on electrochemical performances of melt-spun nanocrystalline and amorphous Mg2Ni1−xMnx (x = 0–0.4) electrode alloys
55
Investigation on Electromagnetic Properties of PLA/Carbon/Copper Antennas for Breast Cancer Detection
56
Investigation on electromechanical properties of A-site donor rare-earth modified tetragonal (4 mm) lead barium niobate (PBN55) ceramics Original Research Article
57
Investigation on electronic structures and nature of charge-transfer transition of ZnO:Co with variation of Co content
58
Investigation on electronic transport property of cerium nitride nanoribbon-based molecular device: a first-principles study
59
Investigation on electronic, mechanical and thermal properties of Hf–H system
60
Investigation on elemental and isotopic fractionation during 196 nm femtosecond laser ablation multiple collector inductively coupled plasma mass spectrometry
61
Investigation on elemental and isotopic fractionation during 196 nm femtosecond laser ablation multiple collector inductively coupled plasma mass spectrometry
62
Investigation on elemental mercury oxidation mechanism by non-thermal plasma treatment
63
Investigation on energy conservation in thermoplastics production
64
Investigation on energy transfer from Er3+ to Nd3+ in tellurite glass
65
Investigation on enhanced chemiluminescence reaction systems with bis(hydrogenperiodato) argentate(III) complex anion for fluoroquinolones synthetic antibiotics
66
Investigation on environmental assisted fracture behavior of iron aluminides using moire interferometry
67
Investigation on environmental assisted fracture behavior of iron aluminides using moire interferometry
68
Investigation on enzymatic degradation of γ-polyglutamic acid from Bacillus subtilis NX-2
69
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy
70
Investigation on estrogen receptor alpha gene polymorphisms in Iranian women with recurrent pregnancy loss
71
INVESTIGATION ON EXPANSION OF MORTARS CONTAINING TUFF NATURAL POZZOLAN DUE TO SULFATE ATTACK
72
Investigation on experiments and numerical modelling of the residual stress distribution in deformed surface layer of Ti–6Al–4V after shot peening
73
Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule
74
Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule
75
Investigation on fabricating continuous vivid sharkskin surface by bio-replicated rolling method
76
Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
77
Investigation on feasibility of ionic liquids used in solar liquid desiccant air conditioning system
78
Investigation on feasibility of manufacturing “Carton board” from recycled beverage carton (Tetra Pak containers) without using resin
79
Investigation on feasibility to predict the content of saturate plus mono-nuclear aromatic hydrocarbons in vacuum gas oils from bulk properties and empirical correlations
80
Investigation on Fe-doped ZnO nanostructures prepared by a chemical route
81
Investigation on female mate choice in horses and possible association with the MHC
82
Investigation on female mate choice in horses and possible association with the MHC
83
Investigation on femtosecond laser irradiation energy in inducing hydrophobic polymer surfaces
84
Investigation on ferromagnetic and ferroelectric properties of (La, K)-doped BiFeO3–BaTiO3 solid solution
85
Investigation on field emission properties of graphdiyne–BN composite
86
Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound
87
Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound
88
Investigation on flip chip solder joint fatigue with cure-dependent underfill properties
89
Investigation on Flow Characteristics and Parameters Optimization of a New Concept of TC Nozzle
90
Investigation on Flow Characteristics and Performance Estimation of a Hybrid SVC Nozzle
91
Investigation on flow characteristics of generic car body with different boundary conditions
92
Investigation on Flow Characteristics of SVC Nozzles
93
Investigation on fluorescence quenching of dyes by graphite oxide and graphene
94
Investigation on flying plate diameter to thickness ratio influence on damage pattern and spall signal
95
Investigation on foaming properties of some organics for oily bubble bitumen flotation
96
Investigation on forced convective heat transfer of molten salts in circular tubes
97
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming
98
Investigation on formaldehyde gas sensor with ZnO thick film prepared through microwave heating method
99
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process
100
Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of porous Zr-rich lead zirconate titante ceramics
101
Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of pulsed laser deposited Pb(Zr0.93Ti0.07)O3 thin films
102
Investigation on Fracture Behavior of Armor Ceramics Against HEAT Penetration
103
Investigation on friction and wear behaviors of FeS films on L6 steel surface
104
Investigation on fuel-rich premixed flames of monocyclic aromatic hydrocarbons: Part I. Intermediate identification and mass spectrometric analysis
105
Investigation on gait time series by means of factorial moments
106
Investigation on gamma-ray position sensitivity at 662 keV in a spectroscopic 3” x 3” LaBr3:Ce scintillator
107
Investigation on gamma-ray position sensitivity at 662 keV in a spectroscopic 3” x 3” LaBr3:Ce scintillator
108
Investigation on gasoline deep desulfurization for fuel cell applications
109
Investigation on gasoline homogeneous charge compression ignition (HCCI) combustion implemented by residual gas trapping combined with intake preheating through waste heat recovery
110
Investigation on generated power of thermoelectric roof solar collector
111
Investigation on giant optical activity of piezoelectric crystals with langasite structure
112
Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining
113
Investigation on glycosylation patterns of proteins from human liver cancer cell lines based on the multiplexed proteomics technology
114
Investigation on grain refinement and precipitation strengthening applied in high speed wire rod containing vanadium
115
Investigation on Grease Elastohydrodynamic Lubrication
116
Investigation on Grinding Characteristics and Surface-Modifying Effects of Biocompatible Co-Cr Alloy
117
INVESTIGATION ON GROWTH AND CHARACTERIZATION OF NONLINEAR OPTICAL DICHLORO-DIGLYCINE ZINC II SINGLE CRYSTAL
118
Investigation on growth modes of GaN layers grown by LIRE
119
Investigation on growth process and tribological behavior of mixed alkylsilane self-assembled molecular films in aqueous solution
120
Investigation on growth, structural, optical, thermal, dielectric and mechanical properties of organic l-prolinium trichloroacetate single crystals
121
Investigation on Habit Formation, Risk Aversion and Intertemporal Substitution in Consumption of Iranian Households by GMM Approach
122
Investigation on heat and mass transfer in 3D woven fibrous material
123
Investigation on heat and mass transfer in 3D woven fibrous material [Int. J. Heat Mass Transfer 54 (2011) 3575–3586]
124
Investigation on heat and mass transfer in hygroscopic random charged fiber webs
125
Investigation on heat transfer and pressure drop during swirl flow boiling of R-134a in a horizontal tube
126
Investigation on heat transfer around buried coils of pile foundation heat exchangers for ground-coupled heat pump applications
127
Investigation on heat transfer characteristics of aircraft icing including runback water
128
Investigation on heat transfer characteristics of tapered cylinder pin fin heat sinks
129
Investigation on heat transfer evaluation for a more efficient two-zone combustion model in the case of natural gas SI engines
130
Investigation on heat transfer non-uniformity in rod bundle
131
Investigation on heat transfer properties of slurry of stabilized paraffin during a melting process
132
Investigation on heavy crude-water two phase flow and related flow characteristics
133
Investigation on heavy liquid metal cooling of ADS fuel pin assemblies
134
Investigation on hexamethyldisilazane vapor treatment of plasma-damaged nanoporous organosilicate films
135
Investigation on high NF permeate recovery and scaling potential prediction in NF–SWRO integrated membrane operation Original Research Article
136
Investigation on high temperature short-term creep and stress relaxation of titanium alloy
137
Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel
138
Investigation on highly ordered porous anodic alumina membranes formed by high electric field anodization
139
Investigation on high-pressure metal hydride hydrogen compressors
140
Investigation on hole drift mobility in poly(n-hexylphenylsilane)
141
Investigation on Host Finding Behavior of the Two Parasitoids of Potato Tuber Moth in a Flight Tunnel
142
Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium–high strain rates
143
Investigation on hot deformation behavior of AISI T1 high-speed steel
144
INVESTIGATION ON HOT DEFORMATION BEHAVIOR OF AL-CU-MG-PB ALLOY
145
Investigation on hot deformation behavior of P/M Ni-base superalloy FGH96 by using processing maps
146
Investigation on hot deformation behavior of Waspaloy
147
Investigation on hot forming limits of high strength steel 22MnB5
148
Investigation on Hot Tearing Susceptibility of A201 Aluminum Alloy in Different Ingate Velocities and Molds
149
Investigation on hot-dip aluminised and subsequent HIPʹped steel sheets
150
Investigation on hot-fatigue behaviors of gradient thermal barrier coatings by EB-PVD
151
Investigation on hybrid cascaded multilevel inverter with reduced dc sources
152
Investigation on hydrogen annealing effect for various ferroelectric films by electrostatic force microscope
153
Investigation on hydrogen induced cracking behaviors of Ni-base alloy
154
Investigation on hydrogen production by catalytic steam reforming of maize stalk fast pyrolysis bio-oil
155
Investigation on hydrogen production using multicomponent aluminum alloys at mild conditions and its mechanism
156
Investigation on hydrophobic films from a hydrophobic powder
157
Investigation on idle performance of a spark-ignited ethanol engine with dimethyl ether addition
158
Investigation on improved Gabor order tracking technique and its applications
159
Investigation on in vitro dissolution rate enhancement of indomethacin by using a novel carrier sucrose fatty acid ester
160
Investigation on Incidence of Marekʹʹs Disease in Broiler Flocks of some Regions in Tehran Province, Iran
161
Investigation on incomplete condensation of non-azeotropic working fluids in high temperature heat pumps
162
Investigation on induction heating for hot stamping of boron alloyed steels
163
Investigation on Industrial Distribution in Cities of Iran
164
Investigation on Infectious coryza of layer chicken in Bangladesh with isolation, identification and antibiogram study
165
Investigation on Infectious Dropsy of Indian Major Carps
166
Investigation on influence factors of buffeting response of bridges and its aeroelastic model verification for Xiaoguan Bridge
167
Investigation on influence of dynamic strain ageing on fatigue crack growth behaviour of modified 9Cr–1Mo steel
168
Investigation on influence of sodium- or strontium-modification on corrosion-resistance of Al–11.7%Si alloy
169
Investigation on Influences of Synthesis Methods on the Magnetic Properties of Trimetallic Nanoparticles of Iron-Cobalt- Manganese Supported by Magnesium Oxide
170
Investigation on infrared laser absorption spectroscopy measurement of acetylene trace quantities
171
Investigation on initial stage of rapid pyrolysis at high pressure using Taiheiyo coal in dense phase
172
Investigation on Instability of RayleighBenard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition
173
Investigation on intelligent building standard communication protocols and application of IT technologies
174
Investigation on inter molecular complexation between 4,4′-methylene-bis(N,N-dimethylaniline) and β-cyclodextrin: Preparation and characterization in aqueous medium and solid state
175
Investigation on interface atomic state in compacted NiFe2O4 nanocrystalline by Mِssbauer spectroscopy
176
Investigation on interface atomic state in compacted NiFe2O4 nanocrystalline by Mِssbauer spectroscopy
177
Investigation on interface barrier of Au–CdZnTe contacts
178
Investigation on interface barrier of Au–CdZnTe contacts
179
Investigation on interface resistance between alternating layers in the upper of blast furnace
180
Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique
181
Investigation on interfacial adhesion of Ti–6Al–4V/nitride coatings
182
Investigation on interfacial interaction of flame retarded and glass fiber reinforced PA66 composites by IGC/DSC/SEM
183
Investigation on interferon alpha-inducible protein 6 (IFI6) gene as a candidate for meat and carcass quality in pig
184
Investigation on interior moisture distribution inducing dielectric anisotropy of coals
185
Investigation on Interval Edge-Colorings of Graphs
186
Investigation on intracavity second-harmonic generation of a new Li-doped GdCa4O (BO3)3 crystal
187
Investigation on intracavity second-harmonic generation of a new Li-doped GdCa4O(BO3)3 crystal
188
Investigation on isobaric vapor liquid equilibrium for acetic acid + water + (n-propyl acetate or iso-butyl acetate)
189
Investigation on isobaric vapor–liquid equilibrium for acetic acid + water + methyl ethyl ketone + isopropyl acetate
190
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack
191
Investigation on key properties controlling early-age stress development of blended cement concrete
192
Investigation on kinetic processes of fabrication of honeycomb-patterned polystyrene film and adsorption of surfactant by quartz crystal microbalance in impedance analysis method
193
Investigation on kinetics mechanism of hydrogen absorption in the La2Mg17-based composites
194
Investigation on lactation persistency and IGF-I gene polymorphisms in dairy sheep
195
Investigation on Laf3/Si Structure as Light-Addressable Potentiometric Fluoride (Fˉ) Sensor
196
Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle
197
Investigation on lap-joint behaviour of GFRP plates bonded to silica fume and rice husk ash concrete
198
Investigation on levels of blood homosystem in aged male hypertensive patients with low extremity atherosclerosis disease
199
Investigation on life cycle assessment oflead and zinc production
200
Investigation on LiNaSO4–Al2O3 ceramics as electrolytes for H2/O2 fuel cells
201
Investigation on lipase-catalyzed solution polymerization of cyclic carbonate
202
Investigation on lithium de-intercalation mechanism for LiNi0.45Mn0.45Al0.1O2
203
Investigation on lithium/polymer electrolyte interface for high performance lithium rechargeable batteries
204
Investigation on lithium–polymer electrolyte batteries
205
Investigation on local scour downstream of adverse stilling basins
206
Investigation on long-term creep rupture properties and microstructure stability of Fe–Ni based alloy Ni–23Cr–7W at 700 °C
207
Investigation on low loss (1–x) Mg0.95Co0.05TiO3–(x) Ca0.6La0.8/3TiO3 composite series for achieving a nearly zero temperature coefficient of resonant frequency
208
Investigation on low room-temperature resistivity Cr/(Ba0.85Pb0.15)TiO3 positive temperature coefficient composites
209
Investigation on L-shell X-ray fluorescence parameters for heavy elements and compounds
210
Investigation on luminescence and NOx removal by pulse corona discharges
211
Investigation on luminescence properties of Ln3+ doped Sr3EuMgSi2O8 (Ln=Dy, Er, Ho)
212
Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
213
Investigation on magnetorheological elastomers based on natural rubber
214
Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni–Mn–In alloys
215
Investigation on material properties and surface characteristics related to tyre–road noise for thin layer surfacings
216
Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell
217
Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying
218
Investigation on Mechanical Behavior of Embedded Geocell in Geocell-Reinforced Railway Embankment
219
Investigation on mechanical properties and fracture behavior of A356 aluminum alloy based ZrO2 particle reinforced metal-matrix composites
220
Investigation on Mechanical Properties of Hybrid Polymer Composite Reinforced by Rice Husks and Date Palm Fibers as a Construction Material
221
Investigation on mechanical properties of P92 steel using ball indentation technique
222
Investigation on mechanical property of annealed copper particles and cold sprayed copper coating by a micro-indentation testing
223
Investigation on Mechanism of Altitude Characteristic for Air-breathing Pulsed Laser Thruster
224
Investigation on mechanism of critical cavitating flow in liquid jet pumps under operating limits
225
Investigation on mechanism of magnetization reversal for nanocrystalline Pr-Fe-B permanent magnets by micromagnetic finite element methods
226
Investigation on mechanism of metal foil surface finishing with vibration-assisted micro-forging
227
Investigation on mechanism of photocatalytic activity enhancement of nanometer cerium-doped titania
228
Investigation on mechanochemical synthesis of Al2O3/BN nanocomposite by aluminothermic reaction
229
Investigation on meniscus shape and flow characteristics in open rectangular microgrooves heat sinks with micro-PIV
230
Investigation on metabolism of cisplatin resistant ovarian cancer using a genome scale metabolic model and microarray data
231
Investigation on metal elements in the brain tissues from DNTC patients
232
Investigation on Metallurgical Factors Controlling Charpy Impact Toughness in 1Cr21Ni5Ti Duplex Stainless Steel Original Research Article
233
Investigation on metals (V, Ni, and Fe) accumulation in the collection site of oil sludge
234
Investigation on methods for dealing with pile-up errors in evaluating the mechanical properties of thin metal films at sub-micron scale on hard substrates by nanoindentation technique
235
Investigation on microbial deterioration of exquisite collection of old manuscripts in Iran
236
Investigation on micro-perforated panel absorber with ultra-micro perforations
237
INVESTIGATION ON MICROSTRIP PATCH FRACTAL ANTENNA
238
Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding
239
Investigation on microstructure and creep properties of as-cast and aging-treated Mg–6Sn–5Al–2Si alloy
240
Investigation on microstructure and hydrogen generation performance of Al-rich alloys
241
Investigation on microstructure and mechanical behavior of Al–ZrB2 composite prepared by microwave and spark plasma sintering
242
Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process
243
Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer
244
Investigation on microstructure and properties of CrAlN/AlON nanomultilayers
245
Investigation on Microstructure and Wear Resistance of the Plain Carbon Steel Hardfaced by the Fe-Cr-C Electrodes Containing Mo, W, V Elements
246
Investigation on microstructure characterization and property of rapidly solidified Mg–Zn–Ca–Ce–La alloys
247
Investigation on Microstructure Evolution of a Semi-Austenitic Stainless Steel Through Hot Deformation
248
Investigation on Microstructure, Lattice and Structural Chemistry of Biogenic Silver Nanoparticles
249
Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment
250
Investigation on microstructures and electrochemical performances of hydrogen storage alloys
251
Investigation on Microstructures and Mechanical Properties ofthe Hypoeutectic Al-10Si-0.8Fe-XEr Alloy
252
Investigation on microstructures of NiO–YSZ composite and Ni–YSZ cermet for SOFCs
253
Investigation on microtribological behavior of thin films using friction force microscopy
254
Investigation on minerals migration during co-firing of different straw/coal blending ratios
255
Investigation on mode III interlaminar fracture of glass/epoxy laminates using a modified split cantilever beam test
256
Investigation on molar mass, solubility and enzymatic fragmentation of xylans by multi-detected SEC chromatography
257
Investigation on molecular interactions of nicotinamide in aqueous citric acid monohydrate solutions with reference to manifestation of partial molar volume and viscosity B-coefficient measurements
258
Investigation on monotonic and cyclic stress–strain characteristics of Ti–2Al–2.5Zr alloy
259
Investigation on monotonic and cyclic stress–strain characteristics of Ti–2Al–2.5Zr alloy
260
Investigation on Mosquitoes Fauna (Diptera: Culicidae) and Probable Vector of West Nile Virus in Lorestan Province, Western Iran
261
Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique
262
INVESTIGATION ON MYCOFLORA OF POULTRY BREEDING HOUSES’ AIR AND STUDYING THE EFFICACY OF SPRAYING AND FUMIGATION ON INACTIVATING THE AIRSPORA
263
Investigation on nanobubbles on graphite substrate produced by the water–NaCl solution replacement
264
Investigation on nanobubbles on graphite substrate produced by the water–NaCl solution replacement
265
Investigation on nanocrystalline copper-doped zirconia thin films for optical sensing of carbon monoxide at high temperature
266
Investigation on nano-frictional performance of glucose-assisted ZnO sol–gel film on quartz substrate
267
Investigation on native vesicles containing the nicotinic acetylcholine receptor using FTIR-spectroscopy
268
Investigation on Natural Color Extraction from Black Tea Waste
269
Investigation on near-boundary solutions by singular boundary method
270
Investigation on NIR, coating mechanism of PS-b-PAA coated calcium carbonate particulate
271
Investigation on non-circular hydraulic jumps formed due to obliquely impinging circular liquid jets Pages 1429-1439
272
Investigation on non-conventional honing of sculptured surfaces for parts made of alloy steel
273
Investigation on nonequlibrium radiation and relaxation phenomena in shock tubes
274
Investigation on nonlinear optical properties of ladder-structure polydiacetylenes derivatives by using the elongation finite-field method
275
Investigation on Non-Metallic Inclusions in LCAK Steel Produced by BOF-LF-FTSC Production Route Original Research Article
276
Investigation on nonradiative decay of 4I13/2→4I15/2 transition of Er3+-doped oxide glasses
277
Investigation on Nose and Tail Shape Effects on Hydrodynamic Parameters in Autonomous Underwater Vehicles
278
Investigation on NOx adsorption in [M′]-MAPO-5 (M = Si, Ti; M′ = Ag, Cu) by density functional theory calculation
279
Investigation on nutrients uptake of henna ecotypes under deficit irrigation and nitrogen
280
Investigation on Ochratoxin A stability using different extraction techniques
281
Investigation on one-pot hydrothermal synthesis, structural and optical properties of ZnS quantum dots
282
Investigation on operational characteristics of a miniature automatic cooling device
283
Investigation on optical absorption properties of electrochemically formed porous InP using photoelectric conversion devices
284
Investigation on optical properties in the surface of KClxBr1-x mixed crystals irradiated to gamma radiation (A new approach)
285
Investigation on optical properties of NiMn2O4 films by spectroscopic ellipsometry
286
Investigation on optical properties of ZnO nanowires by electron energy-loss spectroscopy
287
Investigation on optical transmission spectra of (1−x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals
288
Investigation on optimal working fluid inventory of a cryogenic loop heat pipe
289
Investigation on organic pollutants from a domestic heating system using various solid biofuels
290
Investigation on Organochlorine Pesticides Residues and Trace Metals in Melon (Colocynthis citrollus L.): A Survey
291
Investigation on origin of excess noise in superconducting and normal state BiSrCaCuO films
292
Investigation on PA/PP mixture properties by means of DMTA method
293
Investigation on packaging parameters of a circular multi-layered diaphragm-type piezoelectric actuator
294
Investigation on parasexiphenyl deposits onto alignment layers useful in liquid crystal displays
295
Investigation on Parasites and some Causes of Mortality in Captive Punjab urial (Ovis vignei punjabiensis), Pakistan
296
Investigation on particle trajectories and lagrangian statistics at the outlet of a circular jet
297
Investigation on passive open boundary conditions adapted to the conjunction of strong currents, standing tidal wave and high stratification: Application to the French Guiana Continental Shelf
298
Investigation on passivity of titanium under steady-state conditions in acidic solutions
299
Investigation on PEGylation strategy of recombinant human interleukin-1 receptor antagonist Original Research Article
300
Investigation on percolation in conductance of mixed reverse micelles
301
Investigation on Performance Accuracy of Different Surrogates in Real Time Tumor Tracking at External Beam Radiotherapy
302
Investigation on performance improvement of a fully-actuated quadrotor
303
Investigation on performance of an integrated solid oxide fuel cell and absorption chiller tri-generation system
304
Investigation on performance of zirconia and magnesia–zirconia stationary phases in hydrophilic interaction chromatography
305
Investigation on performances of non-loss storage for cryogenic liquefied gas Original Research Article
306
Investigation on periodic cracking of elastic film/substrate system by the extended finite element method
307
Investigation on phase relationships and creep properties of Ir–Nb–X (X = Hf, Ta, or Ti) ternary alloys
308
Investigation on phase transformation mechanism of zeolite NaY under alkaline hydrothermal conditions
309
Investigation on phenolic compounds stability during microwave-assisted extraction
310
Investigation on phospheonol pyruvate carboxylase and proline in damaged and indamaged needles of Picea Abies and Abies Alba
311
Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cement
312
Investigation on Photocatalytic Activity of Perovskite ZnTiO3 and CdTiO3 Nanocrystals for Degradation of Crystal Violet and Congo Red Pollutants under Sunlight
313
Investigation on photocatalytic degradation of ethyl violet dyestuff using visible light in the presence of ordinary rutile TiO2 catalyst doped with upconversion luminescence agent
314
Investigation on photophysical properties of a substituted 3H-indole-modified β-cyclodextrin: I. Conformation in water and recognition mechanism as a chemosensor
315
Investigation on photophysical properties of a substituted 3H-indole-modified β-cyclodextrin: II. Efficient photoinduced energy transfer with naphthalene and its derivatives
316
Investigation on Physical and Mechanical Properties of Denim Woven Fabrics Made from Different Spandex Percentages
317
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst
318
investigation on physical properties of carbon nanotubes prepared by mechanothermal method
319
Investigation on physical properties of waste cooking oil – Rejuvenated bitumen binder
320
Investigation on Physicochemical Properties of Sugarcane Bagasse Fibre - Reinforced Polyester Composite
321
Investigation on Physiographic Condition of Wild Pistachio Habitats in Zagros Forests, Iran using GIS
322
Investigation on piezoelectric lead zirconate titanate detector bombarded obliquely with hypervelocity iron particles
323
Investigation on Plasmodium falciparum and Plasmodium vivax infection influencing host haematological factors in tribal dominant and malaria endemic population of Jharkhand
324
Investigation on polycrystalline CVD diamond-based alpha-particle detectors
325
Investigation on polymer–rubber aggregate modified porous concrete
326
Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites
327
Investigation on polysulfone blended NH-2MIL125 (Ti) membrane for photocatalytic degradation of Methylene Blue dye
328
Investigation on possibility of mechanochemical synthesis of CaTiO3 from different precursors
329
Investigation on possibility of neutron electric optical devices based on piezoelectric single crystals
330
Investigation on possibility of neutron electric optical devices based on piezoelectric single crystals
331
Investigation on possible allergenicity of 19 different commercial enzymes used in the food industry
332
Investigation on Possible Contamination of Port Sediments by Means of ATRFTIR Spectroscopy and Thermal Analysis
333
Investigation on possible relationships between the content of sulfate and selected metals in Chianti wines
334
Investigation on possible relationships between the content of sulfate and selected metals in Chianti wines
335
Investigation on potential applicability of subsurface cooling in Singapore
336
Investigation on powder metallurgy Cr–Si–Ta–Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance
337
Investigation on power output of the gamma-configuration low temperature differential Stirling engines
338
Investigation on pozzolanic effect of perlite powder in concrete
339
Investigation on Pr2 − xSrxNiO4 + δ (x = 0.3–1.0) cathode materials for intermediate temperature solid oxide fuel cell
340
Investigation on practical training participation intentions of technical and vocational college students through trust perceptions
341
Investigation on precipitation in Zircaloy-2 fuel cladding tube
342
Investigation on preformed shape design to improve formability in tube hydroforming process using FEM
343
Investigation on pre-oxidation of steels in light water reactor circuits Original Research Article
344
Investigation on preparation and physical properties of LPCVD SixOyNz thin films and nanocrystalline Si/SixOyNz superlattices for Si-based light emitting devices
345
Investigation on preparation and physical properties of nanocrystalline Si/SiO2 superlattices for Si-based light-emitting devices
346
Investigation on preparation and properties of Pb(Zr0.95Ti0.05)O3 thin films
347
Investigation on preparation of Al–4.5%Cu/SiCp nanocomposite powder via mechanical milling
348
Investigation on preparation of multiwalled carbon nanotubes by DC arc discharge under N2 atmosphere Original Research Article
349
Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods
350
Investigation on processing of industrial set-up plasma enhanced chemical vapor deposition with pulsed d.c. power
351
Investigation on propagation characteristics of the pressure wave in gas flow through pipes and its application in gas drilling
352
Investigation on properties and microstructures of spheroidal graphite Fe–C–2Si and Fe–C–2Al cast irons
353
Investigation on properties of a novel ceria–zirconia–praseodymia solid solution and its application in Pd-only three-way catalyst for gasoline engine emission control
354
Investigation on properties of re-dispersible cationic hydrogel nanoparticles
355
Investigation on properties of TiO2 thin films deposited at different oxygen pressures
356
Investigation on pseudosymmetry, twinning and disorder in crystal structure determinations: Ba(H2O)M2III[PO3(OH)]4 (M=Fe, V) as examples
357
Investigation on pulsed Nd:YAG laser welding of 49Ni–Fe soft magnetic alloy
358
Investigation on Pulverized Coal Combustion Behavior by Non-Isothermic Integral Thermogravimetry Method Original Research Article
359
Investigation on pumping oxygen characteristics of (Bi2O3)0.73(Y2O3)0.27 solid electrolyte
360
Investigation on purification of hydrochloric acid by membrane method
361
Investigation on pyrolysis behavior and decomposition compounds of three synthesized glycosidically bond flavor precursors
362
Investigation on pyrolysis characteristic of natural coke using thermogravimetric and Fourier-transform infrared method
363
Investigation on pyrolysis of Moroccan oil shale/plastic mixtures by thermogravimetric analysis
364
Investigation on QSAR and binding mode of a new class of human rhinovirus-14 inhibitors by CoMFA and docking experiments Original Research Article
365
Investigation on Raman spectra and thermal properties of LuVO4 and Nd:LuVO4 crystals
366
Investigation on rapid degradation of sodium dodecyl benzene sulfonate (SDBS) under microwave irradiation in the presence of modified activated carbon powder with ferreous sulfate Original Research Article
367
Investigation on RC rafters having different types of reinforcement
368
Investigation on RC rafters having different types of reinforcement
369
Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers
370
Investigation on reduction of cement binder in cold bonded pelletization of iron ore fines
371
Investigation on reduction of required superconductor volume in a resistive fault current limiter with Bi2223 bulk superconductor
372
Investigation on REE Transported by Airborne Dust and Deposited on Vegetation
373
Investigation on relationship between mechanical properties and microstructural characteristics of metal matrix composites fabricated by cold spraying technique
374
Investigation on Relationships among Deformation, Texture and Properties of TA16 Alloy Tube
375
Investigation on relaxation dynamics of photoexcitations and spectral narrowing of photoluminescence in PPV films
376
Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server
377
Investigation on reliability of nanolayer-grained Ti3SiC2 via Weibull statistics
378
Investigation on requirement of crude protein for maintenance in Shaoxing ducks
379
Investigation on resistance to attrition of coated particles by response surface methodology
380
Investigation on rheological behavior of 8 mol% yttria stabilized zirconia (8YSZ) powder using Tiron
381
Investigation on Risk Factors of Ventilator-Associated Pneumonia in Acute Cerebral Hemorrhage Patients in Intensive Care Unit
382
Investigation on ropiness development by isolates of the genera Lactobacillus, Alcaligenes and Feta cheese starter cultures Original Research Article
383
Investigation on Safety Knowledge, Attitude, and Performance (Safety-KAP) Among Firefighters of Operating Units in Tehran
384
Investigation on Sb-rich Sb–Se–Te phase-change material for phase change memory application
385
Investigation on scandium-doped manganate La0.8Sr0.2Mn1−xScxO3−δ cathode for intermediate temperaturesolid oxide fuel cells
386
Investigation on selective rhenium leaching from molybdenite roasting flue dusts
387
Investigation on semi-insulating GaAs detectors using laser-induced current pulses
388
Investigation on semi-insulating GaAs detectors using laser-induced current pulses
389
Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor Original Research Article
390
Investigation on sensitized chemiluminescence systems and their mechanism for five fluoroquinolones Original Research Article
391
Investigation on sequential extraction of peanut allergens for subsequent analysis by ELISA and 2D gel electrophoresis
392
Investigation on Serum Levels of Interleukin-18 and Interleukin-6 in Patients With Dermatomyositis and Polymyositis
393
INVESTIGATION ON SEXUAL AND ASEXUAL PROPAGATION METHODS OF DAMASK ROSE (ROSA DAMASCENA MILL.)
394
Investigation on shape transferability in ultraprecision glass molding press for microgrooves
395
Investigation on shape variation of Au nanocrystals
396
Investigation on shot-coke-forming propensity and controlling of coke morphology during heavy oil coking
397
Investigation on simultaneous analysis of multicomponent polycyclic aromatic hydrocarbon mixtures in water samples: a simple synchronous fluorimetric method
398
Investigation on single-electron dynamics in coupled GaAs-AlGaAs quantum wires
399
Investigation on single-electron dynamics in coupled GaAs-AlGaAs quantum wires
400
Investigation on sintering mechanism of nanoscale tungsten powder based on atomistic simulation Original Research Article
401
Investigation on size dependent structural and magnetic behavior of nickel ferrite nanoparticles prepared by sol–gel and hydrothermal methods
402
Investigation on Slag-Refractory Interaction in Ladle Using Computational Techniques
403
Investigation on sliding wear performance of WC10Co2Ni cladding developed through microwave irradiation
404
Investigation on SnO2 nanopowders stored for different time and BaTiO3 modification
405
Investigation on soaking and formation of lead/acid battery plates with different mass structure
406
Investigation on socio –economic factors of rice straw burning in central and western county in Guilan Province.
407
Investigation on soil genesis and land suitability evaluation of Anarak region: a case study in Fars province
408
Investigation on solar desiccant dehumidification process for energy conservation of central air-conditioning systems
409
Investigation on solar hybrid desiccant cooling system for commercial premises with high latent cooling load in subtropical Hong Kong
410
Investigation on solar stills having floating plates
411
Investigation on sol–gel silica coatings for the protection of ancient glass: Interaction with glass surface and protection efficiency
412
Investigation on solid solubility and physical properties of Cu–Fe/CNT nano-composite prepared via mechanical alloying route
413
Investigation on Solubility of Hydrogen Sulfide in Molten Sulfur Using Iodometric Back Titration Method
414
Investigation on solvent-free solid polymer electrolytes for advanced lithium batteries and their performance
415
Investigation on some Ecological and Morphological Factor of Lagochilus macracanthus Fisch. & C. A. Mey in Yazd Province
416
Investigation on some main glycosides content of Stevia rebaudian B. under different concentrations of commercial and synthesized silver nanoparticles
417
Investigation on Some Morphological and Physiological Characteristics of Gerbera jamesonii as Affected by Humic Acid and Nano-Calcium Chelate in Hydroponic Culture Conditions
418
Investigation on some of the salient features of II–IV–V2 pnictides using band structure calculations as a tool
419
Investigation on some Schiff bases as HCl corrosion inhibitors for carbon steel
420
Investigation on sorption equilibria of Mn(II), Cu(II) and Cd(II) on a carboxylic resin by the Gibbs–Donnan model
421
INVESTIGATION ON SOUND ABSORPTION COEFFICIENT OF NATURAL PADDY FIBERS
422
Investigation on spacers and structures: A simple but effective approach toward high-performance hybrid white organic light emitting diodes
423
Investigation on spontaneous ignition of two kinds of organic material with water
424
Investigation on Stability and Galloping Characteristics of Iced Quad Bundle Conductor
425
Investigation on stability and preservation of arsenic species in iron rich water samples
426
Investigation on stability and rheological properties of nanofluid of ZnO nanoparticles dispersed in poly(ethylene glycol)
427
Investigation on stability of PZT/epoxy piezocomposite with pressure and temperature
428
Investigation on status and influential factors of cognitive function of the community-dwelling elderly in Changsha City
429
Investigation on steady state deformation and free vibration of a rotating inclined Euler beam
430
Investigation on steady state deformation and free vibration of a rotating inclined Euler beam
431
Investigation on strain dependence of dynamic recrystallization behavior using an inverse analysis method
432
Investigation on strength, toughness and microstructure of an Al–Zn–Mg–Cu alloy pre-stretched thick plates in various ageing tempers
433
Investigation on strengthening of 6A02 aluminum alloy sheet in hot forming-quenching integrated process with warm forming-dies
434
Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
435
Investigation on stress distribution of multilayered composite structure (MCS) using infrared thermographic technique
436
Investigation on stress evolution in boron nitride films
437
Investigation on stress-crack opening relationship of engineered cementitious composites using inverse approach
438
Investigation on structural and physicochemical modifications of standard maize, waxy maize, wheat and potato starches after DIC treatment
439
Investigation on structural and thermal expansion properties of Al2ErGe2
440
Investigation on structural features of Shengli lignite through oxidation under mild conditions
441
Investigation on structural fluctuation of supercritical cyclohexane by small-angle X-ray scattering
442
Investigation on structural, optical and dielectric properties of Co doped ZnO nanoparticles synthesized by gel-combustion route
443
Investigation on structural, optical, thermal, mechanical and dielectric properties of l-proline cadmium chloride monohydrate single crystals: An efficient NLO material
444
Investigation on structure and properties of low-temperature sintered composite ferrites
445
Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups
446
Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups
447
Investigation on structures and electrochemical performances of the as-cast and -quenched electrode alloys
448
Investigation on Structures and Properties of Yb3+-Doped Laser Glasses
449
Investigation on Subchronic Lead Intoxication on Blood Indices of Male Rats
450
Investigation on substituent effect in novel azo-naphthol dyes containing polymethacrylates for nonlinear optical studies Original Research Article
451
Investigation on substrates of MmNi5-based alloy electrodes for high power applications
452
Investigation on sulfation of modified Ca-based sorbent
453
Investigation on sulfuric acid sulfonation of in-situ sol–gel derived Nafion/SiO2 composite membrane
454
Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing
455
Investigation on synergism of composite additives for zinc corrosion inhibition in alkaline solution
456
Investigation on syngas production via biomass conversion through the integration of pyrolysis and air–steam gasification processes
457
Investigation on synthesis of spheres-on-sphere silica particles and their assessment for high performance liquid chromatography applications
458
Investigation on synthesis, characterisation and electrochemical properties of TiO2–Al2O3 nanocomposite thin film coated on 316 L stainless steel
459
Investigation on synthesis, structure and catalytic modification of Ca(AlH4)2 complex hydride
460
Investigation on tempering of granular bainite in an offshore platform steel
461
Investigation on the accuracy of harmonic pollution metering techniques
462
Investigation on the adsorption capability of egg shell membrane towards model textile dyes
463
Investigation on the Agent Precise Quantitative Control for Foam Technology with Cavitation Jet
464
Investigation on the Agent Precise Quantitative Control for Foam Technology with Cavitation Jet
465
Investigation on the amorphous–crystalline transition and microstructure of sol-gel derived (Ba1−xSrx)TiO3 thin films
466
Investigation on the amounts of Na2CO3 and sulphur to obtain pure Y2O2S and up-conversion luminescence of Y2O2S:Er
467
Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade
468
Investigation on the applicability of turbulent-Prandtl-number models for liquid lead-bismuth eutectic
469
Investigation on the application of DNA forensic human identification techniques to detect homologous blood transfusions in doping control
470
Investigation on the application of titania nanorod arrays to the determination of chemical oxygen demand Original Research Article
471
Investigation on the as-cast microstructure of Nb–Nb silicide based multicomponent alloys
472
Investigation on the association between breast cancer and consumption patterns of combined oral contraceptive pills in the women of Isfahan in 2011
473
Investigation on the Association of Cardiovascular Markers with Severity of Chronic Pyelonephritis
474
Investigation on the atomic oxygen erosion resistance of sol–gel alumina–silica composite films on Kapton
475
INVESTIGATION ON THE AWARENESS AND PERCEPTION, ATTITUDE, AND IMPLEMENTATION OF THE CONCEPT OF ISLAMIZATION OF KNOWLEDGE AMONG UNIVERSITY EDUCATORS
476
Investigation on the ballistic behavior of Al2O3/Al2024 laminated composites
477
Investigation on the ballistic impact behavior of various alloys against 7.62 mm armor piercing projectile
478
Investigation on the ballistic performance of a dual phase steel against 7.62 mm AP projectile
479
Investigation on the Band Gap of Centered Square Phononic Crystals
480
Investigation on the barrier height and inhomogeneity of nickel silicide Schottky
481
Investigation on the barrier height and phase transformation of nickel silicide Schottky contact
482
Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches
483
Investigation on the behavior of choline-derived cationic surfactant in aqueous solution in the absence and presence of PdCl2
484
Investigation on the Behavior of Tensile Damage Evolution in T700/6808 Composite Based on Acoustic Emission Technology
485
Investigation on the behaviour of a DI diesel engine fueled with Jatropha Methyl Ester (JME) and Tyre Pyrolysis Oil (TPO) blends
486
Investigation on the behaviour of a restoration plaster applied on heavy salt loaded masonry
487
Investigation on the behaviour of medium carbon and vanadium microalloyed steels by hot forging test
488
Investigation on the binding activities of citalopram with human and bovine serum albumins
489
Investigation on the Binding Mode of 3, 4-Dihydropyrano[c]Chromene Derivative with Double Strand DNA
490
Investigation on the Biocatalytic Oligomerization of Glycidol
491
Investigation on the biomimetic influence of biopolymers on calcium phosphate precipitation—Part 1: Alginate
492
Investigation on the biomimetic influence of biopolymers on calcium phosphate precipitation-part 2: Chitosan
493
Investigation on the bond strength of Al-1100/St-12 roll bonded sheets, optimization and characterization
494
Investigation on the calcining condition and sintering temperature of perovskite-type La0.7Ca0.3CrO3 complex oxides by a combustion method
495
Investigation on the catalysis of COx-free hydrogen generation from ammonia
496
INVESTIGATION ON THE CAUSES OF VARIATION ORDERS IN THE CONSTRUCTION OF BUILDING PROJECT – A STUDY IN THE STATE OF SELANGOR, MALAYSIA
497
Investigation on the Chain-to-Chain and Chain-to-Open-Framework Transformations of Two One-Dimensional Aluminophosphate Chains
498
Investigation on the Changes in Color Parameters and Turbidity of Cornelian Cherry (cornus mass L) Produced by Microwave and Conventional Heating
499
Investigation on the characteristics and mechanisms of unusual heat transfer of supercritical pressure water in vertically-upward tubes
500
Investigation on the characteristics of the envelope FDTD based on the alternating direction implicit scheme
501
Investigation on the characteristics of the flow and heat transfer in bilaterally heated narrow annuli
502
Investigation on the charge collection properties of a 4H-SiC Schottky diode detector
503
Investigation on the charge collection properties of a 4H-SiC Schottky diode detector
504
Investigation on the charge transfer excitation spectrum for nano-sized Y2O3:Eu3+
505
Investigation on the chemiluminescence reaction of luminol–H2O2–S2−/R–SH system Original Research Article
506
Investigation on the chemoenzymatic synthesis of threo- and erythro-β-hydroxy-l-glutamic acid derivatives
507
Investigation on the Chronic Tension-Type Headache from the Persian Medicine Point of View
508
Investigation on the coagulation and deposition of combustion particles in an enclosed chamber with and without stirring
509
Investigation on the cold start characteristics of a hydrogen-enriched methanol engine
510
Investigation on the combination of space geodetic techniques
511
Investigation on the combustion characteristics of a diesel engine fueled with diesel–azides blends
512
Investigation on the combustion of heavy-oil fly-ashes
513
Investigation on the combustion possibility of dry sewage sludge as a pulverized fuel of thermal power plant
514
Investigation on the compressive properties of the three dimensional four-directional braided composites
515
Investigation on the Concentration of Chemical Contaminants in Swimming Pools in Shahroud, Iran
516
Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling
517
Investigation on the coordination modes: Syntheses, characterization and crystal structures of diorganotin (IV) dichloride with 4(5)-imidazoledithiocarboxylic acid
518
Investigation on the corrosion and hydrogen evolution for AZ91D magnesium alloy in single and anion-containing oxalate solutions
519
Investigation on the corrosion and oxidation resistance of Ni–Al2O3 nano-composite coatings prepared by sediment co-deposition
520
Investigation on the corrosion behavior of aluminum alloys 3A21 and 7A09 in chloride aqueous solution
521
Investigation on the corrosion behavior of Ti–6Al–4V implant alloy by electrochemical techniques
522
Investigation on the Corrosion of Coated Steel Plates with Impact Defect using Divided Steel Plates
523
Investigation on the Corrosion Resistance and Release of Gentamicin Drug from Titanium Implant Reinforced by Polyethylene Glycol / Polyvinyl Alcohol Based Polymer Composite Coating
524
Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage
525
Investigation on the corrosion resistance of carbon black–graphite-poly(vinylidene fluoride) composite bipolar plates for polymer electrolyte membrane fuel cells
526
Investigation on the coupling effect of thermochromism and microstructure on spectral properties of structured surfaces
527
Investigation on the coupling reactions of aryltriflates with aromatic amines: Selection of the metal catalyst
528
Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method
529
Investigation on the crystal growth and characterisation of an organometallic non linear optical crystal – Tetrathiourea mercury tetrathiocyanato manganate
530
Investigation on the crystallography of reverted structure and its effect on the properties of low carbon steel
531
Investigation on the crystallography of the transformation products of reverted austenite in intercritically reheated coarse grained heat affected zone
532
Investigation on the Cu–Cr–RE alloys by rapid solidification
533
Investigation on the Cu–Cr–RE alloys by rapid solidification
534
Investigation on the cyanide leaching optimization for the treatment of KCGM gold flotation concentrate—phase 1
535
Investigation on the Cytotoxicity and Apoptosis of Citrate Based Silver Nanoparticles, In Vitro
536
Investigation on the damage mechanism and prevention of heavy-haul railway rail
537
Investigation on the defect structure and light-induced scattering of LiNbO3:Fe:Mg:Zr crystals with various Li/Nb ratios
538
Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
539
Investigation on the deletion and duplication of PMP22 gene in patients with Charcot-Marie-Tooth using Real-time PCR in Chaharmahal and Bakhtiari and Isfahan Provinces
540
Investigation on the dependence of optical spectra of silver chiral nanostructures on shape, dimensions and incident light by discrete dipole approximation
541
Investigation on the development potential of rooftop PV system in Hong Kong and its environmental benefits
542
Investigation on the dielectric properties of (Ba, Sr)TiO3 thin films on hybrid electrodes
543
Investigation on the diffusion bonding of tungsten and EUROFER97
544
Investigation on the diffusivity of partly fluorinated hydrocarbons in polymers
545
Investigation on the dipole–dipole interactions between tetramethylurea and acetonitrile by two-dimensional asynchronous spectroscopy
546
Investigation on the direct laser metallic powder deposition process via temperature measurement
547
Investigation on the dispersion of carbon nanotubes in nitrile butadiene rubber: Role of polymer-to-filler grafting reaction
548
Investigation on the dispersion of three-dimensional non-magnetized plasma photonic crystals with faced-centered-cubic lattices
549
INVESTIGATION ON THE DYNAMIC PERFORMANCE OF THE TRIPOD-BALL SLIDING JOINT WITH CLEARANCE IN A CRANK–SLIDER MECHANISM. PART 1. THEORETICAL AND EXPERIMENTAL RESULTS
550
Investigation on the early and late stage phase-separation dynamics of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) blends through rheological and scattering functions
551
Investigation on the ecological suitable regionalization of Melicope ptelefolia
552
Investigation on the Effect of Addition of Nano Alumina, Nano Silica, Nano Titania, and MWCNTs on Flexural and Compressive Strengths of Cement Mortar
553
Investigation on the Effect of Age and Gender on Hypersensitivity Reactions due to Allergens Injection in Iraqi Population
554
Investigation on The effect of Airgap Distance for Ignition Coils using Finite Element Methods
555
Investigation on the Effect of Atmosphere on the Pores of Sintered Astaloy CrM Steel
556
Investigation on the effect of benzotriazole on the phosphating of carbon steel
557
Investigation on the effect of carpet fiber inclusion on hydraulic conductivity of clean sand using laboratory and random finite element analyses
558
Investigation on the effect of cellulosic nanoparticles’ morphology on the properties of natural rubber based nanocomposites
559
Investigation on the effect of collagen and vitamins on biomimetic hydroxyapatite coating formation on titanium surfaces
560
Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine
561
Investigation on the Effect of Current Density on Porous GaN Fabricated by UV-assisted Electrochemical Etching
562
INVESTIGATION ON THE EFFECT OF DIFFERENT PARAMETERS IN WHEELED MOBILE ROBOT ERROR.
563
Investigation on the effect of different supercritical fluid extraction process on the activation of the R-134 catalyst
564
Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon
565
Investigation on the effect of flocculants on the filtration behavior in microfiltration of fine particles Original Research Article
566
Investigation on the effect of friction stir processing on the superplastic forming
567
Investigation on the effect of Germination on the Proximate Composition of African Yam Bean (Sphenostylis stenocarpa Hochst ex A Rich) and Fluted Pumpkin (Telferia occidentalis)
568
Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology
569
Investigation on the Effect of Ketotifen Upon Morphine Tolerance and Dependence in Mice
570
Investigation on the Effect of Low Intensity Ultrasound Stimulation on Mouse Spermatogonial Stem Cell Proliferation and Colonization
571
Investigation on the effect of lubrication and forming parameters to the green compact generated from iron powder through warm forming route
572
Investigation on the Effect of Machining Parameters on The Surface Roughness and Recast Layer During Powder- Mixed EDM (PMEDM)
573
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes
574
Investigation on the effect of micro and nano fillers on electrical and thermal conductivity of glass epoxy hybrid composites
575
Investigation on the effect of RF air plasma and neem leaf extract treatment on the surface modification and antimicrobial activity of cotton fabric
576
Investigation on the effect of Tb(dbm)3phen on the luminescent properties of Eu(dbm)3phen-containing mesoporous silica nanoparticles
577
Investigation on the effect of the coherent flow structures in the dispersion of fine particles around a bluff body
578
Investigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
579
Investigation on the effect of trifluoromethyl group on the [3+2] cycloadditions of thiocarbonyl S-methanides with α, β-unsaturated ketones: A theoretical study using DFT
580
Investigation on the effect of Zr doping in ZnO thin films by spray pyrolysis
581
Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete
582
Investigation on the Effectiveness of Holistic Multi-dimensional Treatment Model (HMTM) in Improvement of CARS Test Indicators in Children suffering from Autism Spectrum Disorder
583
Investigation on the Effectiveness of Holistic Multi-dimensional Treatment Model (HMTM) in Improvement of CARS Test Indicators in Children suffering from Autism Spectrum Disorder
584
Investigation on the Effectiveness of the IC Susceptibility TEM Cell Method
585
Investigation on the effectiveness of various methods of information dissemination aiming at a change of occupant behaviour related to thermal comfort and exergy consumption
586
Investigation on the effects of a mechanical shear-stress modification method during cross-flow membrane emulsification
587
INVESTIGATION ON THE EFFECTS OF ANTIBACTERIAL FINISHES ON DYED COTTON KNITTED FABRICS
588
Investigation on the Effects of Bactenecin on POPC Membrane in Atomistic Details Using Molecular Dynamics Simulation
589
Investigation on the Effects of Different Incident Angle of Sarpol-e Zahab Earthquake Ground Motions on an Embankment Dam
590
Investigation on the effects of fiber composites at concrete joints
591
Investigation on the effects of fire retardants on the thermal decomposition of wood-derived rayon fiber in an inert atmosphere by thermogravimetry–mass spectrometry
592
Investigation on the effects of fly ash particles on the thermal radiation in biomass fired boilers
593
INVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
594
Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics
595
Investigation on the effects of microstructure on the impact and fracture toughness of a C–Mn steel with various microstructures
596
Investigation on the effects of native defects on electronic structure in MgB2 by first-principles calculation
597
Investigation on the effects of source directivity of Chinese speech intelligibility in real and virtual rooms
598
Investigation on the Effects of Uncertainties in Construction Quality on the Bursting Capacity of Submarine Pipelines
599
INVESTIGATION ON THE EFFECTS OF VARIOUS WASTE EXTRACTS ON FREE FORMALDEHYDE IN LEATHER
600
Investigation on the Efficacy of some Fungicides in Controlling Alternaria Late Blight of Pistachio
601
Investigation on the electric field profile in CdTe by ion beam induced current
602
Investigation on the electric field profile in CdTe by ion beam induced current
603
Investigation on the Electrical Conductivity of Aqueous Glycol based ZnO Nanofluids
604
Investigation on the electrical properties of metal–Cd0.9Zn0.1Te contacts
605
Investigation on the electrical properties of molten quaternary systems (Li, Na, K, Cs)Cl and (Li, Na, K, Cs)F by MD simulation
606
Investigation on the electrical response behaviors of multiwalled carbon nanotube/polyurethane composite in organic solvent vapors
607
Investigation on the electron transfer between anatase and rutile in nano-sized TiO2 by means of surface photovoltage technique and its effects on the photocatalytic activity
608
Investigation on the enhancement of ultraviolet emission in Ag-ZnO microrods
609
Investigation on the existence of optimum interlayer distance for H2 uptake using pillared-graphene oxide
610
Investigation on the existence of solutions for some nonlinear functional-integral equations Original Research Article
611
Investigation on the expression of IGF-I protein in insulin-resistant rat brain
612
Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis
613
Investigation on the failure of air compressor
614
Investigation on the failure of the gear shaft connected to extruder
615
Investigation on the feasibility and enhancement methods of wind power utilization in high-rise buildings of Hong Kong
616
Investigation on the feasibility of room temperature plastic deformation of pure magnesium by simple shear extrusion process
617
Investigation on the film-forming properties of lab fermenter scale produced scleroglucans from Sclerotium rolfsii ATCC 201126
618
Investigation on the fine structure of sea-breeze during ESCOMPTE experiment
619
Investigation on the fission track analysis of uranium-doped particles for the screening of safeguards environmental samples
620
Investigation on the fission track analysis of uranium-doped particles for the screening of safeguards environmental samples
621
Investigation on the Flexural Behavior of Corroded Concrete Beams Repaired by CFRP Sheet Under Different Corrosion Levels
622
Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution
623
Investigation on the flexural behaviour of high-performance reinforced concrete beams using sandstone aggregates
624
Investigation on the flexural behaviour of reinforced concrete beams using phyllite aggregates from mining waste
625
Investigation on the flow and thermal behavior of impinging jet ventilation systems in an office with different heat loads
626
Investigation on The Flow Characteristics of Rotating Nozzle Cavitation Water Jet Flow Field
627
Investigation on the fluorescence quenching of 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO) by certain estrogens and catechols
628
INVESTIGATION ON THE FLUX-BASED TORQUE-RIPPLE BEHAVIOR IN DTC BASED INDUCTION MOTOR DRIVES
629
Investigation on the foaming behaviors of NC-based gun propellants
630
Investigation on the formation and kinetics of glucose-fed aerobic granular sludge
631
Investigation on the formation and kinetics of glucose-fed aerobic granular sludge
632
Investigation on the formation and wear resistance of TiC coatings
633
Investigation on the formation of serrated grain boundaries with grain boundary characteristics in an AISI 316 stainless steel
634
Investigation on the formation of the preferred orientations in a TbDyFe alloy with directional solidification
635
Investigation on the formation of the preferred orientations in a TbDyFe alloy with directional solidification
636
Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
637
Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
638
Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings
639
Investigation on the fretting fatigue behaviors of steel wires under different strain ratios
640
Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi-cylinder diesel engine with common-rail injection system
641
Investigation on the fundamental niche of a rare species: an experiment on establishment of Luronium natans
642
Investigation on the Gas Jet Flow Performance Confined in Round Pipe
643
Investigation on the gas particle separation efficiency of the gas particle partitioner
644
Investigation on the gaseous and particulate emissions of a compression ignition engine fueled with diesel–dimethyl carbonate blends Original Research Article
645
Investigation on the gastrointestinal properties of ethanolic extract of Cannabis sativa through in vivo and in vitro approaches
646
Investigation on the generation process of HO2 radicals by γ-ray irradiation in O2-loaded fumed silica
647
Investigation on the Genotoxicity of Mercuric Chloride to Freshwater Clarias gariepinus
648
Investigation on the geochemical dynamics of a hydrate-bearing pockmark in the Niger Delta
649
Investigation on the geometric and matrix effects and quantitative determination of K, Cl and S atomic fraction for biomass burning particles by Monte Carlo simulation Original Research Article
650
Investigation on the geometrical aspect of deformation during equal-channel angular pressing by in-situ physical modeling experiments
651
Investigation on the growth of DAST crystals of large surface area for THz applications
652
Investigation on the growth performances of selected probiotic supplemented tilapia (Oreochromis niloticus) and walking catfish (Clarias batrachus) fingerlings
653
Investigation on the heavy-metal content of zinc-air button cells
654
Investigation on the Hermitian matrix expression subject to some consistent equations
655
Investigation on the high-temperature flow behavior of biomass and coal blended ash
656
Investigation on the hot deformation behavior of powder metallurgy TiAl-based alloy using 3D processing map
657
Investigation on the humification of municipal solid waste incineration residue and its effect on the leaching behavior of dioxins
658
Investigation on the hydration of CFBC fly ash
659
Investigation on the icosahedral quasicrystal phase in Mg70.8Zn28Nd1.2 alloy
660
Investigation on the IL-18 -607A/C and -137C/G on the susceptibility of ischemic stroke
661
Investigation on the Impact of an Energy Desubsidization Shock on the General Price Index Via a Nonlinear Inflation Model: Case of Iran
662
Investigation on the Impact of Silicon Carbide and Process Parameters on Wire Cut-EDM of Al/SiCp MMC
663
Investigation on the impacts of different genders and ages on satisfaction with thermal environments in office buildings
664
Investigation on the impression creep properties of a cast Mg–6Al–1Zn magnesium alloy
665
Investigation on the improved radiation hardness of silicon detectors with high oxygen concentration
666
Investigation on the improved radiation hardness of silicon detectors with high oxygen concentration
667
Investigation on the improvement of red phosphorescence in CaTiO3:Pr3+ nanoparticles
668
Investigation on the inclusion behavior of neutral red with β-cyclodextrin, hydroxypropyl-β-cyclodextrin and sulfobutylether-β-cyclodextrin Original Research Article
669
Investigation on the influence of cell shape anisotropy on the mechanical performance of closed cell aluminium foams using micro-computed tomography
670
Investigation on the influence of channel geometries on PEMFC performance
671
Investigation on the influence of heat-treatment parameters on the hardness of AA6061-SiCp composite
672
Investigation on the influence of machining parameters when machining tool steel using EDM
673
Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography
674
Investigation on the influence of plasma properties and SOL transport on the particle flux profiles on divertor plates in the Large Helical Device
675
Investigation on the influence of substitute groups in organic nanodevices
676
Investigation on the Influence of Synovial Fluid and Vitreous Humour on Avulsion Wounds Healing in Rabbits
677
Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system
678
Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system
679
Investigation on the influences of heat transfer enhancement measures in a thermally driven metal hydride heat pump
680
Investigation on the inhomogeneous structure of metallic glasses based on the initial elastic deformation in nanoindentation
681
Investigation on the inquilines (Hymenoptera: Cynipidae, Synergini) of oak galls from inner western Anatolia, Turkey
682
Investigation on the interaction behavior between bisphenol A and pepsin by spectral and docking studies
683
Investigation on the interaction between a heterocyclic aminal derivative, SBDC, and human serum albumin
684
Investigation on the interaction between C16TAB and NaCMC in semidilute aqueous solution based on rheological measurement
685
Investigation on the interaction effect of two parallel axial through-wall cracks existing in steam generator tube Original Research Article
686
Investigation on the interaction of tetrachloride fluorescein–bovine serum albumin-β-cyclodextrin and the determination of protein by flow injection analysis Original Research Article
687
Investigation on the interaction of the toxicant, gentian violet, with bovine hemoglobin
688
Investigation on the interactions between hydrophobic anions of ionic liquids and Triton X-114 micelles in aqueous solutions
689
Investigation on the interactions between pirarubicin and phospholipids Original Research Article
690
Investigation on the interactions between polyurethane and metal chloride
691
Investigation on the interactions of silymarin to bovine serum albumin and lysozyme by fluorescence and absorbance
692
Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600 °C
693
Investigation on the internal thermal link of pulse tube refrigerators Original Research Article
694
Investigation on the jet liquid impingement heat transfer for the central processing unit of personal computers
695
Investigation on the kinetic models for the regeneration of silica gel by hot air combined with power ultrasonic
696
Investigation on the knowledge associated with foodborne diseases in consumers of northeastern Portugal
697
Investigation on the linear and nonlinear optical properties of fluorenone-based linear conjugated oligomers: The influence of π-spacer
698
Investigation on the load-displacement curves of a human healthy heel pad: In vivo compression data compared to numerical results
699
Investigation on the locus of solubilization of polycyclic aromatic hydrocarbons in non-ionic surfactant micelles with 1H NMR spectroscopy
700
Investigation on the long-term radiation hardness of low and medium resistivity starting silicon materials for RT silicon detectors in high energy physics
701
Investigation on the low energy conformational surface of tabun to probe the role of its different conformers on biological activity
702
Investigation on the macromolecular network structure of Xianfeng lignite by a new two-step depolymerization
703
Investigation on the magnetomechanical behavior of trilayered GM actuator
704
Investigation on the magneto-optical Voigt effects in surface plasmon modes and anisotropic photonic band gap in the three-dimensional magnetized plasma photonic crystals as the mixed polarized modes considered
705
Investigation on the martensitic transformation and the associated intermediate phase in U–2 wt%Zr alloy
706
Investigation on the martensitic transformation in γ-Fe(n) nanoparticles
707
Investigation on the mechanical behavior of fivefold twinned silver nanowires
708
Investigation on the mechanical behaviors of copper nanowires under torsion
709
Investigation on the Mechanical Properties of Fiber Reinforced Recycled Concrete
710
Investigation on the mechanical strength of magnetic hollow silica prepared from Pickering emulsion route
711
Investigation on the Mechanism of Blade Tip Recess Improving the Aerodynamic Performance of Transonic Axial Flow Compressor
712
Investigation on the mechanism of diffusion in mesopore structured ZSM-5 and improved heavy oil conversion
713
Investigation on the Mechanism of Drag Modification over Triangular Riblets
714
Investigation on the mechanism of the photoluminescence of MCM-41
715
Investigation on the Methaemoglobin Concentration of Three Human Erythrocyte Genotypes Infected With Plasmodium falciparum.
716
Investigation on the microscopic features of layered oxide Li[Ni1 / 3Co1 / 3Mn1 / 3]O2 and their influences on the cathode properties
717
Investigation on the microstructural refinement of an Mg–6 wt.% Zn alloy
718
Investigation on the microstructure and cracking susceptibility of laser-clad V2O5 /NiCrBSiC alloy coatings
719
Investigation on the microstructure and ferroelectric properties of porous PZT ceramics
720
Investigation on the microstructure and mechanical properties of CuCrZr after manufacturing thermal cycle for plasma facing component
721
Investigation on the microstructure and mechanical properties of the spray-formed Cu–Cr alloys
722
Investigation on the microstructure and mechanical properties of Ti–6Al–4V alloy joints with electron beam welding
723
Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content
724
Investigation on the microstructure of self-reinforced Nd-α-sialon ceramics
725
Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application
726
Investigation on the microtribological behaviour of human tooth enamel by nanoscratch
727
Investigation on the microwave-derived LiFePO4/C cathode material
728
Investigation on the Mixture of Calcium and Ammonium Nitrates as Steel Corrosion Inhibitor in Simulated Concrete Pore Solution
729
Investigation on the model of consumers’ perceived risk—integrated viewpoint
730
Investigation on the modification behavior of A356 alloy inoculated with a Sr-Y composite modifier
731
Investigation on the morphologic and morphometric changes in perikaryon and nucleus of spinal neuron during prenatal and postnatal life of male dogs.
732
Investigation on the morphological characteristics of nanofiberous membrane as electrospun in the different processing parameters
733
Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
734
Investigation on the most probable breaking behaviors of copper nanowires with the dependence of temperature
735
Investigation on the nature of the chemical link between acetylenic organosilane self-assembled monolayers and Au(1 1 1) by means of synchrotron radiation photoelectron spectroscopy and scanning tunneling microscopy
736
Investigation on the Neff reverse annealing effect using TSC/I-DLTS: Relationship between neutron induced microscopic defects and silicon detector electrical degradations
737
Investigation on the Neff reverse annealing effect using TSC/I-DLTS: Relationship between neutron induced microscopic defects and silicon detector electrical degradations
738
Investigation on the Neural Mechanism of Hypnosis-Based Respiratory Control Using Functional MRI
739
Investigation on the non-homogeneity of residual stress field induced by laser shock peening
740
Investigation on the nucleation kinetics of zinc thiourea chloride (ZTC) single crystals
741
Investigation on the O3 sensitivity properties of WO3 thin films prepared by sol–gel, thermal evaporation and r.f. sputtering techniques
742
Investigation on the Occurrence of Aedes Species in Borderline of Iran and Azerbaijan for Control of Arboviral Diseases
743
Investigation on the ordering of titanium oxide nanotubes fabricated by anodization on different substrate surface morphologies
744
Investigation on the origin of dielectric constant evolution in films deposited from organosilicon molecules in microwave DECR plasma reactor
745
Investigation on the origin of the giant dielectric constant in CaCu3Ti4O12 ceramics through analyzing CaCu3Ti4O12–HfO2 composites
746
Investigation on the oscillation modes in a thermoacoustic Stirling prime mover: mode stability and mode transition Original Research Article
747
Investigation on the oxidation behavior of Mo–Ru hard coatings
748
Investigation on the oxidation characteristics of copper-added modified Zircaloy-4 alloys in pressurized water at 360°C
749
Investigation on the oxidation of aryl oxiranylmethanols and the synthesis of 2-aryl-N-thiazolyl-oxirane-2-carboxamides as glucokinase activators
750
Investigation on the paraffin prevention performance of lanthanum-modified zinc powder
751
Investigation on the partial oxidation of methane to syngas in a tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ membrane reactor
752
Investigation on the pebble bed flow model in VSOP
753
Investigation on the performance enhancement of silicon solar cells with an assembly grating structure
754
Investigation on the performance of a spark-ignited ethanol engine with DME enrichment
755
Investigation on the performance of UPQC-Q for voltage sag mitigation and power quality improvement at a critical load point
756
Investigation on the performances of multiple microstrip CdTe detectors
757
Investigation on the performances of multiple microstrip CdTe detectors
758
Investigation on the performances of multi-quantum barriers in a single quantum well solar cell
759
Investigation on the phase behaviour of gelatin/agarose mixture in an environment of reduced solvent quality
760
Investigation on the phase separation in undercooled Cu–Fe melts
761
Investigation on the phase stability, sintering and thermal conductivity of Sc2O3–Y2O3–ZrO2 for thermal barrier coating application
762
Investigation on the pH-dependent binding of Eosin Y and bovine serum albumin by spectral methods
763
Investigation on the pH-dependent binding of vitamin B12 and lysozyme by fluorescence and absorbance
764
Investigation on the photocatalytic activity of chemically synthesized zirconium doped cadmium selenide nanoparticles for indigo carmine dye degradation under solar light irradiation
765
Investigation on the photocatalytic activity of TiO2@WO3/ZnO catalyst in the waste water treatment containing alkanolamine contaminants
766
investigation on the photocatalytic and antibacterial activities of green synthesized cupric oxide nanoparticles using clitoria ternatea
767
Investigation on the photoconductive composites: TiOPc with various AZOs
768
Investigation on the photophysics of the narrow bandgap polymer for PDPPTT-T
769
Investigation on the photoreactions of nitrate and nitrite ions with selected azaarenes in water
770
Investigation on the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomer as a toughener
771
Investigation on the porosity development by CO2 activation in heavy oil fly ashes☆
772
Investigation on the potential generation of ultrafine particles from the tire–road interface
773
Investigation on the Potential of OSL for Dating Qanat in the Dasht-e Bayaz Region of Northeastern Iran Using the SAR Protocol for Quartz
774
Investigation on the potential use of the mimetic peroxidase-catalyzed reaction of hydrogen peroxide and o-hydroxyphenylfluorone in fluorescence analysis Original Research Article
775
Investigation on the Potentials of Cupola Furnace Slag in Concrete
776
Investigation on the precipitation behavior of M3C phase in T91 ferritic steels
777
Investigation on the precursors of bump-prone coal failure
778
Investigation on the preparation and chromatographic behavior of a new para-tert-butylcalix[4]arene-1,2-crown-4 stationary phase for high performance liquid chromatography
779
Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing process
780
Investigation on the preparation of Si/mullite/Yb2Si2O7 environmental barrier coatings onto silicon carbide
781
Investigation on the presence of domoic acid in Greek shellfish
782
Investigation on the presence of sulphites in fresh meat preparations: Estimation of an allowable maximum limit
783
Investigation on the pressure drop characteristics of cryocooler regenerators under oscillating flow and pulsating pressure conditions Original Research Article
784
INVESTIGATION ON THE PREVALENCE OF LEUKAEMIA AT A TERTIARY CARE HOSPITAL, LAHORE
785
Investigation on the production of copper nitride (copper azide) thin films and their nanostructures
786
Investigation on the production of hydrogen rich gas in a plasma converter for motorcycle applications
787
Investigation on the properties and kinetics of glucose-fed aerobic granular sludge
788
Investigation on the properties of high-pressure torsion (HPT) processed Al/B4C composite
789
Investigation on the properties of linear PLA-poloxamer and star PLA-poloxamine copolymers for temporary biomedical applications
790
Investigation on the properties of Nb and Al doped Ti3SiC2 as a new interconnect material for IT-SOFC
791
Investigation on the Protein Degradation, Free Fatty Acid Content and Area Fraction of Poosti Cheese, Iranian Traditional Cheese Ripened in Skin
792
Investigation on the pulsed DC plasma nitriding with optical emission spectroscopy
793
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. I. Flow reactor pyrolysis and jet stirred reactor oxidation
794
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. II. A comprehensive kinetic modeling study
795
Investigation on the pyrolysis of cow bone as a catalyst for ozone aqueous decomposition: Kinetic approach
796
Investigation on the pyrolysis of cow bone as a catalyst for ozone aqueous decomposition: Kinetic approach
797
Investigation on the radiation damage behavior of various alloys in a fusion reactor using thorium molten salt
798
Investigation on the reactions influencing biomass air and air/steam gasification for hydrogen production
799
Investigation on the reactivity of isoxazol-5-ones towards 1,2-diaza-1,3-dienes: new entry to variously substituted (imidazol-2-yl)acetate and 1,3-oxazin-6-one derivatives
800
Investigation on the red shift of charge transfer excitation spectra for nano-sized Y2O3:Eu3+
801
Investigation on the regulated and unregulated emissions of a DME engine under different injection timing
802
INVESTIGATION ON THE RELATION BETWEEN THE USE OF ICT AND BUREAUCRATIC HEALTH
803
Investigation on the Relationship between D-Dimer and Cell Blood Count Indices in COVID-19 Prognosis: A Retrospective Study on 320 COVID-19 Patients
804
Investigation on the relationship between intermediate temperature embrittlement and intergranular precipitate in Ni(Bi) alloy
805
Investigation on the relationship between leaf water use efficiency and physio-biochemical traits of winter wheat under rained condition
806
Investigation on the Relationship between Mental Workload and Musculoskeletal Disorders among Nursing Staff
807
Investigation on the relationship between the physicochemical properties of particles composed of a novel lipid A analog, E5531, and its pharmacokinetics
808
Investigation on the relationship of proline with wheat anti-drought under soil water deficits
809
Investigation on the removal of Mo(VI) from Mo–Re containing wastewater by chemically modified persimmon residua
810
Investigation on the residual stress and microstructure of (TiB + TiC)/Ti–6Al–4V composite after shot peening
811
Investigation on the response of Iranian oriental and semi oriental tobacco genotypes to Potato Virus Y (PVY) under controlled conditions
812
Investigation on the response of segmented concrete targets to projectile impacts
813
Investigation on the rheological and stability characteristics of coal–water slurry with long side-chain polycarboxylate dispersant
814
Investigation on the rheological behavior of nylon 6/11
815
Investigation on the role of air in the dynamical evolution and thermodynamic state of a laser-induced aluminium plasma by spatial- and time-resolved spectroscopy
816
Investigation on the Role of Learning Theory in Learning Analytics
817
Investigation on the Role of Recycling Materials and the Importance of their Potential Energy in the Trend of Sustainable Development
818
Investigation on the role of Spirulina platensis in ameliorating behavioural changes, thyroid dysfunction and oxidative stress in offspring of pregnant rats exposed to fluoride
819
Investigation on the role of VEGF gene polymorphisms in the risk of osteosarcoma
820
Investigation on the safety concrete for highway crash barrier
821
INVESTIGATION ON THE SCATTERING FROM ONE-DIMENSIONAL NONLINEAR FRACTAL SEA SURFACE BY SECOND-ORDER SMALL-SLOPE APPROXIMATION
822
Investigation on the seasonal transformation of Tiab estuary’s shoreline using RS and GIS techniques
823
Investigation on the seismic behavior of exterior beam–column joint using T-type mechanical anchorage with hair-clip bar
824
Investigation on the seismic behavior of exterior beam–column joint using T-type mechanical anchorage with hair-clip bar
825
Investigation on the Simultaneous Effects of Zn Additions and Critical Ingate Velocity on the Hot Tearing Susceptibility of A356 and A206 Aluminum Alloys
826
Investigation on the sliding of aluminium thin foils against PVD-coated carbide forming-tools during micro-forming
827
Investigation on the sloshing effect in a 2D tank under harmonic excitation using Smoothed Particle Hydrodynamics (SPH) and Finite Volume method (FVM)
828
Investigation on the solidification of several pure cyclic and aromatic hydrocarbons at pressures to 300 MPa
829
Investigation on the solubilization of organic dyes and micro-polarity in AOT water-in-CO2 microemulsions with fluorinated co-surfactant by using UV-Vis spectroscopy
830
Investigation on the sonocatalytic degradation of acid red B in the presence of nanometer TiO2 catalysts and comparison of catalytic activities of anatase and rutile TiO2 powders
831
Investigation on the sonocatalytic degradation of acid red B in the presence of nanometer TiO2 catalysts and comparison of catalytic activities of anatase and rutile TiO2 powders
832
Investigation on the sonocatalytic degradation of congo red catalyzed by nanometer rutile TiO2 powder and various influencing factors Original Research Article
833
Investigation on the sonocatalytic degradation of methyl orange in the presence of nanometer anatase and rutile TiO2 powders and comparison of their sonocatalytic activities Original Research Article
834
Investigation on the spectrum-effect relationships of EtOAc extract from Radix Isatidis based on HPLC fingerprints and microcalorimetry
835
Investigation on the spurious eigenvalues of vibration plates by non-dimensional dynamic influence function method
836
Investigation on the square cell honeycomb structures under axial loading
837
Investigation on the stability of deoxynivalenol and DON-3 glucoside during gastro-duodenal in vitro digestion of a naturally contaminated bread model food
838
Investigation on the static recording characteristic of super-resolution near-field structure with antimony mask layer
839
Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test
840
Investigation on the Stress of Chinese Pediatricians Under the Outbreak of COVID-19
841
Investigation on the structural and electrical properties of NdSrNi1−xCrxO4+δ (0.1≤x≤0.9) system
842
Investigation on the structural and nonlinear optical properties of Pt doped TiO2 nanoparticles
843
Investigation on the structural characteristics of metallic glasses based on the first displacement excursion behavior in nanoindentation
844
Investigation on the structural properties and corrosion inhibition of W coatings on stainless steel AISI 304 using PF device
845
Investigation on the structural stability and electronic properties of InSb nanostructures – A DFT approach
846
Investigation on the structural, morphological and photochemical properties of spin-coated TiO2 and ZnO thin films prepared by sol-gel method
847
Investigation on the structure and electrochemical properties of the laser sintered La0.7Mg0.3Ni3.5 hydrogen storage alloys
848
Investigation on the structure and the oxidation activity of the solid carbon produced from catalytic decomposition of methane
849
Investigation on the submerged liquid jet arrays impingement cooling
850
Investigation on the Suitability of Fobur Granite in Jos, Plateau State, Nigeria for Road Construction
851
Investigation on the Suitability of Two-Dimensional Depth-Averaged Models for Bend-Flow Simulation
852
Investigation on the sulfur state and phase transformation of spent and regenerated S zorb sorbents using XPS and XRD
853
Investigation on the supercritical carbon dioxide extraction of some polar drugs from spiked matrices and tablets
854
Investigation on the superplasticity behavior of ultrahigh carbon steel
855
Investigation on the surface and near-surface characteristics of Ti–2.5Cu after various mechanical surface treatments
856
Investigation on the surface layer characteristics of shot peened titanium matrix composite utilizing X-ray diffraction
857
Investigation on the surface properties of chemically modified natural fibers using inverse gas chromatography
858
Investigation on the surface reactivity of luminescent porous silicon
859
Investigation on the Surface State of TiO2 Ultrafine Particles by Luminescence
860
Investigation on the synergetic effect between anatase and rutile nanoparticles in gas-phase photocatalytic oxidations
861
Investigation on the Synergistic Complexation of Ni(II) with 1,10-Phenanthroline and Dithizone at Hexane-Water Interface Using Centrifugal Liquid Membrane-Spectrophotometry
862
Investigation on the synthesis conditions at the interpore distance of nanoporous anodic aluminum oxide: A comparison of experimental study, artificial neural network, and multiple linear regression
863
Investigation on the temperature effect of a mixed vesicle composed of polydiacetylene and BODIPY 558
864
Investigation on the temperature-dependent growth rate of carbon nanotubes using chemical vapor deposition of ferrocene and acetylene
865
Investigation on the tensile properties of three-dimensional full five-directional braided composites
866
Investigation on the teratogenic and embryotoxic effects of nanozeolite on chick embryos model
867
Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites
868
Investigation on the thermal performance of different lightweight roofing structures and its effect on space cooling load
869
Investigation on the thermal transport properties of ethylene glycol-based nanofluids containing copper nanoparticles
870
Investigation on the thermodynamic properties of KCl/CsCl + NaCl + CH3OH + H2O quaternary systems at 298.15 K
871
Investigation on the thermoelectric properties of nanostructured image
872
Investigation on the TiO2 nanotubes ordering fabricated by anodizing on different substrate surface morphologies
873
Investigation on the TPR prediction accuracy in blanket neutronics experiments with reflector at JAEA/FNS
874
Investigation on the traceability of three dimensional scanning electron microscope measurements based on the stereo-pair technique
875
Investigation on the transition crystal of ordinary rutile TiO2 powder by microwave irradiation in hydrogen peroxide solution and its sonocatalytic activity
876
Investigation on the transition crystal of ordinary rutile TiO2 powder by microwave irradiation in hydrogen peroxide solution and its sonocatalytic activity
877
INVESTIGATION ON THE TRANSPORT PROCESS OF FLUE GAS DESULFURIZATION IN A CIRCULATING FLUIDIZED BED
878
Investigation on the tribological properties of boron and lanthanum permeated mild steel
879
Investigation on the tribology of Zr ion implanted tool steel
880
Investigation on the Trophic Status of Ekbatan Reservoir: A Drinking Water Supply Reservoir in Iran
881
Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method
882
Investigation on the understanding and implementation of food allergen management among Thai food manufacturers
883
Investigation on the Usage of Some Non-Almandine Garnet Minerals as Abrasive Material in Waterjet Cutting
884
Investigation on the use of triphenyl bismuth as radiopacifier for (di)methacrylate dental adhesives
885
Investigation on the using of linco-spectin solution for in ovo administration in chicken embryo
886
Investigation on the valence of Cr ions in LiAlO2
887
Investigation on the valence state of Te ions in the Bi6Ti5TeO22 thin film using X-ray photoelectron spectroscopy
888
Investigation on the Values of International Parishan Lake’s Plants
889
Investigation on the variation in the fine structure of plasma-polymerized composite membrane by positron annihilation spectroscopy
890
Investigation on the variation of deep drawability of STS304 using FEM simulations
891
Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process
892
Investigation on the Weibull parameters identification for local approach application in the ductile to brittle transition regime
893
Investigation on the weldline strength of thin-wall injection molded ABS parts
894
INVESTIGATION ON THE WHIRLING MOTION OF FULL ANNULAR ROTOR RUB
895
Investigation on the xylitol aqueous-phase reforming performance for pentane production over Pt/HZSM-5 and Ni/HZSM-5 catalysts
896
Investigation on the zirconia phase transition under irradiation
897
Investigation on thermal and trace element characteristics during co-combustion biomass with coal gangue
898
Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability
899
Investigation on thermal performance calculation of two type solar air collectors using artificial neural network
900
Investigation on thermal performance of glazed solar chimney walls q
901
Investigation on thermal performance of high temperature multilayer insulations for hypersonic vehicles under aerodynamic heating condition
902
Investigation on thermal radiation spectra of coal ash deposits
903
Investigation on thermal stability of Ta2O5, TiO2 and Al2O3 coatings for application at high temperature
904
Investigation on thermal, electrical, and electrochemical properties of scandium-doped Pr0.6Sr0.4(Co0.2Fe0.8)(1−x)ScxO3−δ as cathode for IT-SOFC
905
Investigation on thermochemical behavior of co-pyrolysis between oil-palm solid wastes and paper sludge
906
Investigation on thermochemical behaviour of low rank Malaysian coal, oil palm biomass and their blends during pyrolysis via thermogravimetric analysis (TGA)
907
Investigation on thermo-mechanical behaviors of artificial muscle films
908
Investigation on thermomechanical fracture in the framework of configurational forces
909
Investigation on thermotropic liquid crystalline and photocrosslinkable polyarylidene arylphosphate esters containing cyclohexanone units
910
Investigation on three new metal carboxydiphosphonates: Syntheses, structures, magnetic and luminescent properties
911
Investigation on three seawater desalination processes coupled with NHR-200 Original Research Article
912
Investigation on three-dimensional stress concentration of LY12-CZ plate with two equal circular holes under tension
913
Investigation on three-dimensional temperature field of human knee considering anatomical structure
914
Investigation on thrust in vibration drilling of fiber-reinforced plastics
915
Investigation on Ti6Al4V laser welding using statistical and Taguchi approaches
916
Investigation on TIG welding of SiCp-reinforced aluminum–matrix composite using mixed shielding gas and Al–Si filler
917
Investigation on Tin Electrodeposition from Sulphuric Acid Medium
918
Investigation on TiO2-coated optical fibers for gas-phase photocatalytic oxidation of acetone
919
Investigation on Tm3+-doped silicate glass for 1.8 μm emission
920
Investigation on transient behaviors of flat plate heat pipes
921
Investigation on transition crystal of ordinary rutile TiO2 powder and its sonocatalytic activity
922
Investigation on transition crystal of ordinary rutile TiO2 powder and its sonocatalytic activity
923
Investigation on transonic round convex-corner flows
924
Investigation on transport properties of strained La0.85Ba0.15MnO3 thin films using hall measurement
925
Investigation on traveling wave thermoacoustic heat engine with high pressure amplitude
926
Investigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers
927
Investigation on twisting distortion of thin plate stiffened structure under welding
928
Investigation on two-dimensional band structures of trans-polyacetylene doped with n-type dopant
929
Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root
930
Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root
931
Investigation on ultraviolet photoconductivity in p-type ZnO thin films
932
Investigation on upconversion photoluminescence of Bi3TiNbO9:Er3+:Yb3+ thin films
933
Investigation on up-flow anaerobic sludge fixed film (UASFF) reactor for treating low-strength bilge water of Caspian Sea ships
934
Investigation on Vapor Diffusion Resistance Factor in Porous Materials
935
Investigation on vapor-cooled current leads operating in a pulse mode Original Research Article
936
Investigation on vapor–liquid equilibria for binary systems of metal ion-containing ionic liquid [bmim]Zn2Cl5/NH3 by experiment and modified UNIFAC model
937
Investigation on vapor–liquid equilibrium for 2-propanol + 1-butanol + 1-pentanol at 101.3 kPa
938
Investigation on vibrational and structural properties of amorphous alloys produced by mechanical alloying by Raman spectroscopy, X-ray diffraction, EXAFS and RMC simulations
939
Investigation on Vierendeel mechanism failure of castellated steel beams with fillet corner web openings
940
Investigation on volatile profile, lipid fraction degradation and antioxidant content of tomato-based pâtés as a function of ingredient formulation
941
Investigation on vortex shedding of a swept-back wing
942
Investigation on water consumption characteristics and water use efficiency of poplar under soil water deficits on the Loess Plateau
943
Investigation on water soluble organic compounds in fog droplets and interstitial aerosol particles
944
Investigation on water vapor effect on direct sulfation during wet-recycle oxy-coal combustion
945
Investigation on water–rock interaction under geothermal hot dry rock conditions with a novel testing method
946
Investigation on wear and corrosion behavior of Cu–graphite composites prepared by electroforming
947
Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718
948
Investigation on wear behaviors of high-vanadium high-speed steel compared with high-chromium cast iron under rolling contact condition
949
Investigation on wear mechanism of thermochemically fabricated W–Cu composites
950
Investigation on wetted area and film thickness for falling film liquid desiccant regeneration system
951
Investigation on wind power potential on Hong Kong islands—an analysis of wind power and wind turbine characteristics
952
Investigation on withdrawal resistance of various screws in face and edge of wood–plastic composite panel
953
Investigation on wood pellet quality and relationship between ash content and the most important chemical elements
954
Investigation on yield and some agronomic and breeding characteristics of basil masses
955
Investigation on yield and yield components of Zea mays L. under drought stress condition
956
Investigation on yield of lettuce and garlic intercropping in rice harvested lands
957
Investigation on zero grid-electricity design strategies of solid oxide fuel cell trigeneration system for high-rise building in hot and humid climate
958
Investigation on zirconium-coated polyurethane surfaces with regard to biocompatibility
959
Investigation on Zoonotic Cutaneous Leishmaniasis, Southern Iran
960
Investigation Physiological and Biochemical Characteristics of Sorghum (Sorghum bicolor L., var. Kimia) Affected Zeolite Consumption under Water Deficit Situation
961
Investigation procedures for the diagnosis of historic masonries
962
Investigation program to assess slug impact consequences on a reactor upper head
963
Investigation Progressive Collapse of K-Model Steel Truss Bridge under Additional Live Load Following Bridge Repairs
964
Investigation properties of Au–porous a-Si0.70C0.30 as humidity sensor
965
Investigation protocol: Acromegaly and its investigation
966
Investigation protocol: adrenal enlargement
967
Investigation Rate of Emotional Intelligence in Physical Education Teachers in Zanjan Province
968
Investigation Reducing Detrimental Effects of Salt Stress on Morphological and Physiological Traits of (Thymus vulgaris) by Application of Salicylic Acid
969
Investigation Response of Wheat Genotypes to Different level of Nitrogen Fertilizer, Crop Production, Seed Growth Trend and Correlation Between Traits
970
Investigation Role of Vermicompost to Improve Quantitative and Qualitative Characteristics of Corn (Zea mays L.) Production
971
Investigation sand dune stabilization using the Acrylamide Co Acrylic Acid Polymer: a laboratory study
972
Investigation serum procalcitonin in patients with exacerbation of obstructive pulmonary disease
973
Investigation Sleep Quality and Its Effective Factors in Shahroud Firefighters
974
Investigation Small Scale Coffee Producers’ Market Choice Decision (Case study Debub Ari District, SNNPR, Ethiopia)
975
Investigation some Properties of Shahin-Shahr Sewage Sludge For Land Application–Isfahan, Iran
976
Investigation the Annealing Temperature on Some Optical and Structural Properties of Alnico Films
977
Investigation the Association of Internet Addiction with Mental Health and Physical Activity in Teenage Girls: The Mediating Role of Parental Attitude
978
Investigation the Attitude and Motivation of Russian and Korea Researchers Towards Learning English Language
979
Investigation the Attitude of Professors of Shahid Beheshti University of Medical Sciences Towards the Necessity of Implementing Interprofessional Education in 2022
980
Investigation the Behavior of Beam to Column Connection with Flange Plate by Using Component Method
981
Investigation the Capability of Neural Network in Predicting Reverberation Time on Classroom
982
Investigation the Combination of the Bullwhip Effect Weakening and the Anti-Bullwhip Effect Strengthening
983
Investigation the complement level in abortive women with antiphospholipid syndrome
984
Investigation the Concentration of Heavy Metals in the Sediment of Zayandehrood River Bed
985
investigation the correlation between FGL1 expression and prognosis in gastric cancer patients
986
Investigation the Deformations of Shahre Bijar Dam During Impoundment
987
Investigation the Disparities of Urban Development in Western Azerbaijan Province of Iran (using HDI analysis and factor analysis models)
988
INVESTIGATION THE DRYING CHARACTERISTICS OF SOME CITRUS PEELS TO UTILIZE IN PREPRATION OF CAKES
989
Investigation the effect of [Met-Hcl] [Pys] ionic liquid on Candida albicans standard strain and evaluation of its toxicity on mammalian cells
990
Investigation the effect of anode's insert material on spatial distribution of X-ray source in plasma focus device
991
Investigation the Effect of Colloconstructural Corpus-based Instruction on Pragmalinquistic Knowledge of Request Speech Act: Evidence from Iranian EFL Students
992
Investigation the effect of corporate governance on firm financing decisions (case study: manufacturing companies listed in the Tehran Stock Exchange)-
993
Investigation the Effect of Different Agricultural Factors on Pistachio Aflatoxin Content
994
Investigation the Effect of DMMP as Electrolyte Additive on the Flammability and Electrochemical Properties of Lithium-Ion Batteries
995
Investigation the Effect of Encapsulated Bromelain Enzyme in Magnetic Carbon Nanotubes on Colorectal Cancer Cells
996
Investigation the effect of Fe3O4 nanoparticles on liver and stress oxidative parameters at the presence of magnetic field in rat
997
Investigation the Effect of Financial Ratios, Operating Cash Flows and Firm Size on Earnings Per Share: Evidence from the Tehran Stock Exchange
998
Investigation the Effect of Friendly Environment Material on Aluminum Corrosion Resistant
999
INVESTIGATION THE EFFECT OF INLET PORTS DESIGN ON COMBUSTION CHARACTERISTICS AND EMISSION LEVELS OF DIESEL ENGINES
1000
Investigation the effect of irrigation and Different amounts of nitrogen fertilizer on Tobacco cocker 347
