ليست عنوان مقالات لاتين Improved methods for determining the concentration of 6-thioguanine nucleotides and 6-methylmercaptopurine nucleotides in blood Improved solubility and stability of trialkylammonium selenocarboxylate in organic solvents for efficient amidation with azides

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Improved methods for determining the concentration of 6-thioguanine nucleotides and 6-methylmercaptopurine nucleotides in blood

2

Improved methods for divisible load distribution on k-dimensional meshes using pipelined communications

3

Improved methods for elemental analysis of atmospheric aerosols for evaluating human health impacts of aerosols in East Asia

4

Improved methods for isolating and validating indigenous biomarkers in Precambrian rocks

5

Improved methods for mapped grids: Applied to highly excited vibrational states of diatomic molecules

6

Improved methods for selective dissolution of Mn oxides: applications for studying trace element associations

7

Improved methods for the extraction and analysis of isoflavones from soy-containing foods and nutritional supplements by reversed-phase high-performance liquid chromatography and liquid chromatography–mass spectrometry

8

Improved methods for the stereoselective synthesis of mannoheptosyl donors and their glycosides: toward the synthesis of the trisaccharide repeating unit of the Campylobacter jejuni RM1221 capsular polysaccharide

9

Improved methods for the synthesis and isolation of imidazolium based ionic salts

10

Improved methods for urinary atrazine mercapturate analysis—Assessment of an enzyme-linked immunosorbent assay (ELISA) and a novel liquid chromatography–mass spectrometry (LC–MS) method utilizing online solid phase extraction (SPE) Original Research Artic

11

Improved methods of assembly sequence determination for automatic assembly systems

12

Improved methods of measurement and analysis of conversion electron and β-particle spectra

13

Improved MEUF removal of naphthenic acids from produced water

14

Improved microcrystalline silicon TFTs

15

Improved micro-flame detection method for gas chromatography

16

Improved micro-flame detection method for gas chromatography Original Research Article

17

Improved microfluidic chip-based sequential-injection trapped-droplet array liquid–liquid extraction system for determination of aluminium

18

Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating

19

Improved micromachined column design and fluidic interconnects for programmed high-temperature gas chromatography separations

20

Improved microstructural features in screen printed NdBCO thick films on YSZ substrates

21

Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming

22

Improved microstructure of cement-based composites through the addition of rock wool particles

23

Improved microwave dielectric properties of B2O3-doped Nd(Co1/2Ti1/2)O3 ceramics with near zero temperature coefficient of resonant frequency

24

Improved microwave dielectric properties of Nd(Mg0.5Sn0.5)O3 ceramics by substituting Mg2+ with Zn2+

25

Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide

26

Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide Original Research Article

27

Improved microwave steam distillation apparatus for isolation of essential oils: Comparison with conventional steam distillation

28

Improved microwave-assisted wet digestion procedures for accurate Se determination in fish and shellfish by flow injection-hydride generation-atomic absorption spectrometry Original Research Article

29

Improved milk fouling simulation in a helical triple tube heat exchanger

30

Improved MILP models for two-machine flowshop with batch processing machines

31

Improved minima-hopping. TIP4P water clusters, with

32

Improved minimal augmentation procedure for the direct computation of critical points Original Research Article

33

Improved minimax estimation of powers of the variance of a multivariate normal distribution under the entropy loss function

34

IMPROVED MIRROR SOURCE METHOD IN ROOMACOUSTICS

35

Improved mixed model for longitudinal data analysis using shrinkage method

36

Improved MLPG_R method for simulating 2D interaction between violent waves and elastic structures

37

Improved mobility of the copper phthalocyanine thin-film transistor

38

Improved modal characterization of the constitutive parameters in multilayered plates

39

Improved Mode II delamination fracture toughness of composite materials by selective placement of protein-surface treated CNT

40

Improved model for calculating the coefficient of performance of a Peltier module

41

Improved model for improving the inter-instrument agreement of spectrocolorimeters Original Research Article

42

Improved model for mercury emission, transport and deposition

43

Improved model for plate-end shear of CFRP strengthened RC beams

44

Improved model for real-time substructuring testing system

45

Improved model for solute transport in heterogeneous porous media

46

Improved model for the analysis of air fluorescence induced by electrons

47

Improved model for the analysis of air fluorescence induced by electrons

48

Improved model for the analysis of back corona in pulse energised electrostatic precipitators

49

Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up

50

Improved model of multicomponent adsorption in reversed-phase liquid chromatography

51

Improved model prediction and RMPC design for LPV systems with bounded parameter changes

52

Improved model reduction and tuning of fractional-order controllers for analytical rule extraction with genetic programming

53

Improved model selection criteria for SETAR time series models

54

Improved model to determine turbine and compressor boundary conditions with the method of characteristics

55

Improved model to determine turbine and compressor boundary conditions with the method of characteristics

56

Improved modeling and solution methods for the multi-resource routing problem

57

Improved modeling by coupling imperfect models

58

Improved Modeling Capabilites with Reduced-Order Integration

59

Improved modeling of chamber transport for heavy-ion fusion

60

Improved modeling of chamber transport for heavy-ion fusion

61

Improved modeling of chamber transport for heavy-ion fusion

62

Improved modeling of clinical data with kernel methods

63

Improved modeling of flows down inclined planes

64

Improved modeling of microchannel plate response to hard X-rays

65

Improved modeling of microchannel plate response to hard X-rays

66

Improved Modeling of Side-Chain–Base Interactions and Plasticity in Protein–DNA Interface Design

67

Improved modeling of the effect of R-ratio on crack growth rate

68

Improved modelling of detachment and neutral-dominated regimes using the SOLPS B2–Eirene code

69

Improved modelling of downburst outflows for wind engineering applications using a cooling source approach

70

Improved modelling of ship SO2 emissions—a fuel-based approach

71

Improved modelling of the loading spectra using a mixture model approach

72

Improved modelling of the Messinian Salinity Crisis and conceptual implications

73

Improved modelling of the neutron spectrum for the ASP accelerator

74

Improved modelling of vapour-liquid equilibria up to the critical region. Application to the CO2CH4N2 system

75

Improved model-order reduction by using spacial information in moments

76

Improved models for fractal colloidal agglomeration: computationally efficient algorithms

77

Improved models for the prediction of activity coefficients in nearly athermal mixtures Part II. A theoretically-based GE-model based on the van der Waals partition function

78

Improved models of the piezomagnetic field for the 2011 Mw 9.0 Tohoku-oki earthquake

79

Improved models to predict gas–water relative permeability in fractures and porous media

80

Improved modification direction methods

81

Improved modification of the single-switch AC-AC converter for induction heating applications

82

Improved modular synthesis of thieno[3,2-b]pyrroles and thieno[2,3-b]pyrroles

83

Improved modules for the blanket of RTO/RC ITER

84

Improved moisture resistance of SrS:Eu2+ phosphors with nanoscale SiO2 coating

85

Improved moisture resistance of SrSO4:Sm3+ phosphors coated with SiO2

86

Improved molten carbonate fuel cell performance via reinforced thin anode

87

Improved molten salt synthesis (MSS) for SnO2 nanorods and nanotwins

88

Improved moment estimates for invariant measures of semilinear diffusions in Hilbert spaces and applications

89

Improved Moment Strength Prediction of Composite Steel Plate Girders in Positive Bending

90

Improved monitoring of batch processes by incorporating external information

91

Improved monitoring of HABs using autonomous underwater vehicles (AUV)

92

Improved monitoring of surface ozone by joint assimilation of geostationary satellite observations of ozone and CO

93

Improved monitoring of vegetation dynamics at very high latitudes: A new method using MODIS NDVI

94

Improved monochromatic loose cycle partitions in hypergraphs

95

Improved monodispersity of size selected aerosol particles with a new charging and selection scheme for tandem DMA setup

96

Improved Montgomery modular inverse algorithm

97

Improved mood states with lamotrigine in patients with epilepsy

98

Improved Morphological Method in Motion Detection

99

Improved Morphological, Structural, and Optical Features of ErxCuNiO3 {x= 0, 0.5, 0.7, 0.9}

100

Improved morphology of plated lithium in poly(vinylidene fluoride) based electrolyte

101

Improved motion information-based infrared dim target tracking algorithms

102

Improved mould-level control in a continuous steel casting line

103

Improved MPEG-4 still texture image coding under noisy environment

104

Improved MR image reconstruction from sparsely sampled scans based on neural networks

105

Improved MR imaging for patients with metallic implants☆

106

Improved multi-ant-colony algorithm for solving multi-objective vehicle routing problems

107

Improved Multibody Dynamics for Investigating Energy Dissipation in Train Collisions Based on Scaling Laws

108

Improved multi-camera smart tra system for resilient citiesc surveillance

109

Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation

110

Improved multi-level electronic structure methods (MLSEn + d) for atomization energies and reaction energy barriers

111

Improved multi-level Newton solvers for fully coupled multi-physics problems

112

Improved multilevel security with latent semantic indexing

113

Improved Multi-Mode anomalous transport module for tokamak plasmas Original Research Article

114

Improved multiple test procedures for discrete distributions: New ideas and analytical review

115

Improved multiquadric approximation for partial differential equations

116

Improved multiquadric method for elliptic partial differential equations via PDE collocation on the boundary

117

Improved multislice calculations for including higher-order Laue zones effects

118

Improved multislice calculations for including higher-order Laue zones effects

119

Improved multitasking following prefrontal tDCS

120

Improved multivariable quantitative feedback design for tracking error specifications

121

Improved Multivariate Prediction in a General Linear Model with an Unknown Error Covariance Matrix

122

Improved Multivariate Prediction under a General Linear Model

123

Improved Mutasynthetic Approaches for the Production of Modified Aminocoumarin Antibiotics Original Research Article

124

Improved MVT pruning method for MC-EZBC

125

Improved myocardial contrast with second harmonic transient ultrasound response imaging in humans using intravenous perfluorocarbon-exposed sonicated dextrose albumin

126

Improved myocardial ischemia/reperfusion injury in mice lacking tumor necrosis factor-α

127

Improved myocardial performance during repetitive exercise testing: The role of extracellular superoxide dismutase activity in a model of exercise-induced myocardial preconditioning

128

Improved Myocardial Tolerance to Ischaemia in the Diabetic Rabbit

129

Improved N2 fixation in 2,4-D treated wheat roots associated with Azospirillum lipoferum: Studies of colonization using reporter genes

130

Improved N2 fixation in 2,4-D treated wheat roots associated with Azospirillum lipoferum: Studies of colonization using reporter genes

131

Improved NARP-HPLC method for separating triglycerides of palm olein and its solid fractions obtained at low temperature storage

132

Improved NARX-ANFIS Network structure with Genetic Algorithm to optimizing Cash Flow of ATM Model

133

Improved native UV laser induced fluorescence detection for single cell analysis in poly(dimethylsiloxane) microfluidic devices

134

Improved n-butanol production by solvent tolerant Clostridium beijerinckii

135

Improved near surface characterization of shallow arsenic distribution by SIMS depth profiling

136

Improved near surface soil characterizations using a multilayer soil resistivity model

137

Improved near-infrared methane band models and k-distribution parameters from 2000 to 9500 cm−1 and implications for interpretation of outer planet spectra

138

Improved near-term Earth rotation predictions using atmospheric angular momentum analysis and forecasts

139

Improved neighbor detection algorithm for AODV routing protocol

140

Improved neighbor list algorithm in molecular simulations using cell decomposition and data sorting method Original Research Article

141

Improved network resilience of wireless mesh networks using MPLS and Fast Re-Routing techniques

142

Improved Neural Network and the Pontryagin s minimum Principle for Solve Fuzzy Optimal Control ‎Problems‎

143

Improved neural-aided sliding mode controller for autolanding under actuator failures and severe winds

144

Improved neural-network model predicts dewpoint pressure of retrograde gases

145

Improved neurohormonal markers of ventricular function after restoring sinus rhythm by the Maze procedure

146

Improved neuromagnetic detection of fetal and neonatal auditory evoked responses

147

Improved neuron MOS-transistor structures for integrated neural network circuits

148

Improved new qualitative results on stochastic delay differential equations of second order

149

Improved Newton method for optimal power flow problem

150

Improved Newton’s method with exact line searches to solve quadratic matrix equation

151

Improved Newton’s method without direct function evaluations

152

Improved NH3, C2H5OH, and CH3COCH3 sensing properties of SnO2 nanofibers by adding block copolymer P123

153

Improved Nickel-Catalyzed Cross-Coupling Reaction Conditions between ortho-Substituted Aryl Iodides/Nonaflates and Alkylzinc Iodides in Solution and in the Solid-Phase

154

Improved Nitrations Using Metal Nitrate–Sulfuric Acid Systems

155

Improved NMR chemical shifts in density functional theory

156

Improved noble gas polarization production for porous and granular media studies using narrowed-line VBG laser sources

157

Improved nodal expansion method for solving neutron diffusion equation in cylindrical geometry Original Research Article

158

Improved Noise Reduction in Audio Signals Using Spectral Resolution Enhancement With Time-Domain Signal Extrapolation

159

Improved Noninvasive Assessment of Coronary Artery Bypass Grafts With 64-Slice Computed Tomographic Angiography in an Unselected Patient Population Original Research Article

160

Improved nonisotopic PCR-SSCP for screening of p53 mutations

161

Improved non-linear behaviour of ZnO-based varistor thick films prepared by tape casting and screen printing

162

Improved Nonlinear Equation Method for Numerical Prediction of Jominy End-Quench Curves Original Research Article

163

IMPROVED NONLINEAR HETEROGENEOUS MODEL FOR WASTEWATER TREATMENT

164

Improved nonlinear plastic hinge analysis of space frame structures

165

Improved Nonnegative Estimation of Variance Components in Balanced Multivariate Mixed Models

166

Improved normal-phase and reversed-phase gradient high-performance liquid chromatography procedures for the analysis of retinoids and carotenoids in human serum, plant and animal tissues

167

Improved NOx reduction over the staged Ag/Al2O3 catalyst system Original Research Article

168

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

169

Improved n-Si/oxide junctions for environmentally safe solar energy conversion

170

Improved null-collision technique in the direct simulation Monte Carlo method: Application to vibrational relaxation of nitrogen

171

Improved numerical evaluation of the radial groundwater flow equation

172

Improved numerical integration for locking treatment in isogeometric structural elements, Part I: Beams

173

Improved numerical method for the Traction Boundary Integral Equation by application of Stokesʹ theorem

174

Improved numerical prediction of ash formation and deposition using a novel developed char fragmentation model

175

Improved numerical simulation of aerosol deposition in an idealized mouth–throat

176

Improved numerical simulations of incompressible flows based on viscous/inviscid interaction procedures

177

Improved numerical solver for Kansaʹs method based on affine space decomposition

178

IMPROVED NUTRIENT INTAKE IN OLDER OBESE ADULTS UNDERGOING A STRUCTURED DIET AND EXERCISE INTENTIONAL WEIGHT LOSS PROGRAM

179

Improved O2 sensing performance by modifying P–P ligand in [Cu(N–N)(P–P)] complex

180

Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics

181

Improved o-chlorobenzoylformate bioreduction by stabilizing aldo-keto reductase YtbE with additives

182

Improved Ocular Bioavailability of Moxifloxacin HCl using PLGA Nanoparticles: Fabrication, Characterization, In-vitro and In-vivo Evaluation

183

Improved Odor Sensitivity in Attention-Deficit/Hyperactivity Disorder

184

Improved of color properties on Sardinella lemuru oil during adsorbent refining using magnesol xl

185

Improved oil recovery by adsorption–desorption in chemical flooding

186

IMPROVED OIL RECOVERY BY APPLICATION OF ULTRASONIC STIMULATED WATERFLOODING

187

Improved oil recovery by application of vibro-energy to waterflooded sandstones

188

Improved oil recovery using alkaline solutions in limestone medium

189

Improved one-band self-consistent effective mass methods for hole quantization in pMOSFET

190

Improved one-delayed-group neutron kinetic model for small reactivity states

191

Improved open circuit voltage of the photovoltaic device using ferrocene as a donor material

192

Improved open-circuit voltage and efficiency in organic solar cells using a phosphine oxide based interlayer material

193

Improved operating lifetime of phosphorescent OLED by novel anode coating

194

Improved operation of power transformer protection using artificial neural network

195

Improved operational efficiency through elimination of waste and redundancy

196

Improved operations through manpower management in the oil sector

197

Improved optical and structural properties of ZnO thin films by rapid thermal annealing

198

Improved optical limiting in dispersible carbon nanotubes and their metal oxide hybrids Original Research Article

199

IMPROVED OPTICAL PROBE FOR MEASURING PHYTOPLANKTON SUSPENSION CONCENTRATIONS BASED ON OPTICAL FLUORESENSCE AND ABSORPTION

200

Improved optical properties of CdS quantum dots by ligand exchange

201

Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN

202

Improved optical transmittance of Al-doped ZnO thin films by use of ZnO nanorods

203

Improved optimality checkpoint for decision making by using the sub-triangular form

204

Improved optimisation approach to the robust H/sub 2//H/sub /spl infin// control problem for linear systems

205

Improved optimisation method using genetic algorithms for mass transit signalling block-layout design

206

Improved optimisation of excitation sequences in speech and audio coders

207

Improved optimization of polycyclic aromatic hydrocarbons (PAHs) mixtures resolution in reversed-phase high-performance liquid chromatography by using factorial design and response surface methodology

208

Improved optimization of soft-partition-weighted-sum filters and their application to image restoration

209

Improved Optimization Process for Nonlinear Model Predictive Control of PMSM

210

Improved optimization strategies for autofocusing motion compensation in MRI via the analysis of image metric maps

211

Improved Optimization Strategies for Generating Practical Water-Usage and -Treatment Network Structures

212

Improved OR education through the use of spreadsheet models

213

Improved oral bioavailability of core–shell structured beads by redispersion of the shell-forming nanoparticles: Preparation, characterization and in vivo studies

214

Improved oral delivery of clonazepam through liquisolid powder compact formulations: In-vitro and ex-vivo characterization

215

Improved oral delivery of valsartan from maltodextrin based proniosome powders

216

Improved orbit predictions using two-line elements Original Research Article

217

Improved orbital parameters of accreting millisecond pulsar SAX J1808.4-3658 Original Research Article

218

Improved organic optocouplers based on a deep blue fluorescent OLED and an optimized bilayer heterojunction photosensor

219

Improved orientation estimation for texture planes using multiple vanishing points

220

Improved orthodontic stainless steel wires coated with inorganic fullerene-like nanoparticles of WS2 impregnated in electroless nickel–phosphorous film

221

Improved orthogonal array based simulated annealing for design optimization

222

Improved orthokinetic coagulation model for fractal colloids: Aggregation and breakup

223

Improved oscillator strengths and wavelengths for Os I and Ir I, and new results on early r-process nucleosynthesis

224

Improved osseointegration in ion implantation-treated dental implants

225

Improved osteoblast cell affinity on plasma-modified 3-D extruded PCL scaffolds

226

Improved osteogenic differentiation of human marrow stromal cells cultured on ion-induced chemically structured poly-ε-caprolactone

227

Improved outcome after acute coronary syndromes with an intensive versus standard lipid-lowering regimen: results from the Pravastatin or Atorvastatin Evaluation and Infection Therapy–Thrombolysis in Myocardial Infarction 22 (PROVE IT–TIMI 22) trial

228

Improved outcome by identification of high-risk nonocclusive mesenteric ischemia, aggressive reexploration, and delayed anastomosis

229

Improved outcome for children with acute lymphoblastic leukemia after risk-adjusted intensive therapy : A single-institution experience

230

Improved outcome of children with acute myeloid leukemia treated on 2 consecutive protocols

231

Improved outcome with organs from carbon monoxide poisoned donors for intrathoracic transplantation

232

Improved Outcomes After Aortic Valve Surgery for Chronic Aortic Regurgitation With Severe Left Ventricular Dysfunction Original Research Article

233

Improved Outcomes for Cardiac Arrest in Children: Share the Baton With the Bystander

234

Improved outcomes for women undergoing contemporary percutaneous coronary intervention: A report from the national heart, lung, and blood institute dynamic registry

235

Improved outcomes in patients with acute allergic syndromes who are treated with combined H1 and H2 antagonists

236

Improved outcomes in peripartum cardiomyopathy with contemporary

237

Improved Outcomes of Pediatric Dilated Cardiomyopathy and Heart Transplantation

238

Improved outcomes of pediatric dilated cardiomyopathy with utilization of heart transplantation Original Research Article

239

Improved outcomes with an implantable left ventricular assist system: a multicenter study

240

Improved outcomes with early vocal fold medialization for vocal fold paralysis after thoracic surgery

241

Improved outcomes with the Prolene Hernia System mesh compared with the time-honored Lichtenstein onlay mesh repair for inguinal hernia repair

242

Improved outcoupling of light in organic light emitting devices, utilizing a holographic DFB-structure

243

Improved Overshoot Estimation in Pole Placements and Its Application in Observer-Based Stabilization for Switched Systems

244

Improved oxidation resistance of a nanocrystalline chromite-coated ferritic stainless steel

245

Improved oxidation resistance of conducting polychloroprene composites

246

Improved oxidation resistance of Cu60Zr30Ti10 BMG with plasma immersion ion implantation

247

Improved oxidation resistance of ferritic steels with LSM coating for high temperature electrochemical applications

248

Improved oxidation resistance of thermoelectric skutterudites coated with composite glass

249

Improved oxidation resistance of TiAlN coatings by doping with Si or B

250

Improved oxides for production of lead/acid battery plates

251

Improved oxygen barrier performance of poly(vinyl alcohol) films through hydrogen bond complex with poly(methyl vinyl ether-co-maleic acid)

252

Improved oxygen delivery by positive pressure ventilation with continuous negative external chest pressure

253

Improved oxygen permeability of Ce0.8Sm0.2O2−δ–PrBaCo2O5+δ dual-phase membrane by surface-modifying porous layer

254

Improved oxygen reduction activity on the Ih Cu@Pt core–shell nanoparticles

255

Improved oxygen storage capacity on CeO2/zeolite hybrid catalysts. Application to VOCs catalytic combustion

256

Improved oxygen systems for childhood pneumonia: a multihospital effectiveness study in Papua New Guinea

257

Improved oxygen tolerance of the Synechocystis sp. PCC 6803 bidirectional hydrogenase by site-directed mutagenesis of putative residues of the gas diffusion channel

258

Improved oxygen-sensing characteristics based on (TiO2)x(NbO2.5)1−x composite

259

Improved oxytetracycline production in Streptomyces rimosus M4018 by metabolic engineering of the G6PDH gene in the pentose phosphate pathway

260

Improved p charts to monitor process quality

261

Improved p charts to monitor process quality

262

Improved P2 phenylglycine-based hepatitis C virus NS3 protease inhibitors with alkenylic prime-side substituents Original Research Article

263

Improved Paclitaxel and Baccatin III Production in Suspension Cultures of Taxus media

264

Improved Pain Control with Combination Spinal Cord Stimulator Therapy Utilizing Sub-perception and Traditional Paresthesia Based Waveforms: A Pilot Study

265

Improved pair-potential function for diatomic systems

266

Improved parallel implementation of the two-dimensional Ising model Original Research Article

267

Improved Parallel Integer Sorting without Concurrent Writing

268

Improved parallel QR method for large least squares problems involving Kronecker products

269

Improved parallel-iterated pseudo two-step RK methods for nonstiff IVPs Original Research Article

270

Improved parallelization techniques for the density matrix renormalization group Original Research Article

271

Improved parameter identification using additional spectral information

272

Improved parameterization of dust emission (PM10) fluxes by the gradient method using the Naiman tower data at the Horqin desert in China Original Research Article

273

Improved parametric empirical determination of module short circuit current for modelling and optimization of solar photovoltaic systems

274

Improved parametric time warping for proteomics

275

Improved Particle Filter for Target Tracking

276

Improved particle filters for multi-target tracking

277

Improved particle fusing geometric relation between particles in FastSLAM

278

Improved particle identification using cluster counting in a full-length drift chamber prototype

279

Improved particle identification using cluster counting in a full-length drift chamber prototype

280

Improved particle plug valve for Geldart-D powders

281

Improved particle scavenging by a combination of ultrasonics and water sprays

282

improved particle swarm optimization based distributed energy-efficient opportunistic algorithm for clustering and routing in wsns

283

Improved particle swarm optimization combined with chaos

284

Improved particle swarm optimization for combined heat and power economic dispatch

285

Improved particle swarm optimization for combined heat and power economic dispatch

286

Improved particle swarm optimization to minimize periodic preventive maintenance cost for series-parallel systems

287

Improved Particle Swarm Optimization with Disturbance Term for Multi-machine Power System Stabilizer Design

288

Improved partition efficiency with threaded cylindrical column in vortex counter-current chromatography

289

Improved Passive Flux Samplers for Measuring Ammonia Emissions from Animal Houses, Part 1: Basic Principles

290

Improved Passive Flux Samplers for measuring Ammonia Emissions from Animal Houses, Part 2: Performance of Different Types of Sampler as a Function of Angle of Incidence of Airflow

291

Improved patency in vein grafts harvested with surrounding tissue: results of a randomized study using three harvesting techniques

292

Improved patency of infrainguinal polytetrafluoroethylene bypass grafts using a distal Taylor vein patch

293

Improved patient outcome after surgical treatment for loculated empyema

294

Improved patient outcome after surgical treatment for loculated empyema

295

Improved patient outcome after surgical treatment for loculated empyema

296

Improved Pattern Clustering Algorithm for Recognizing Transversal Distribution of Steel Strip Thickness Original Research Article

297

Improved PCA Algorithm for Face Recognition

298

Improved PCR detection of Campylobacter jejuni from chicken rinses by a simple sample preparation procedure

299

Improved PCR detection of potyviruses in Allium species

300

Improved PCR-based Assays for Pre-symptomatic Diagnosis of Light Leaf Spot and Determination of Mating Type of Pyrenopeziza Brassicae on Winter Oilseed Rape

301

Improved Pd/γ-Al2O3–Ce catalysts for benzene combustion

302

Improved PDP Sustainers for Reducing Current Stress and Non-Linear Effect

303

Improved peak selection strategy for automatically determining minute compositional changes in fuels by gas chromatography–mass spectrometry

304

Improved Peanut Flour for a Reduced-Fat Peanut Butter Product

305

Improved pebbling bounds

306

Improved Pena–Rodriguez portmanteau test

307

Improved Peňa–Rodriguez portmanteau test

308

Improved peptide fractionation by electrodialysis with ultrafiltration membrane: Influence of ultrafiltration membrane stacking and electrical field strength

309

Improved peptide mass fingerprinting matches via optimized sample preparation in MALDI mass spectrometry Original Research Article

310

Improved peptide vaccine strategies, creating synthetic artificial infections to maximize immune efficacy

311

Improved perceived general health is observed with prosthodontic treatment

312

Improved perceived general health is observed with prosthodontic treatment

313

Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications

314

Improved Performance Analysis of Single-phase Line Start Synchronous Reluctance Motor Derived from Induction Motor

315

Improved performance and cost reduction of RO seawater systems using UF pretreatment

316

Improved performance and quantitative detection of copro-antigens by a monoclonal antibody based ELISA to diagnose human opisthorchiasis

317

Improved performance and stability by an Al/Ni bilayer cathode in organic light-emitting diodes

318

Improved performance and student satisfaction after implementation of a problem-based preclinical obstetrics and gynecology curriculum

319

Improved performance from GaAs–AlGaAs quantum cascade lasers with enhanced upper laser level confinement

320

Improved performance in green light-emitting diodes made with CdSe-conjugated polymer composite

321

Improved performance in silicon enzyme microreactors obtained by homogeneous porous silicon carrier matrix

322

Improved performance in synthetic diamond neutron detectors: Application to boron neutron capture therapy

323

Improved performance in synthetic diamond neutron detectors: Application to boron neutron capture therapy

324

Improved performance in TD-CDMA mobile radio system by optimizing energy partition in channel estimation

325

Improved performance lead iodide nuclear radiation detectors

326

Improved performance lead iodide nuclear radiation detectors

327

Improved performance mechanism of III–V compound triple-junction solar cell using hybrid electrode structure

328

Improved performance of a cellulose-based anion exchanger with tertiary amine functionality for the adsorption of chromium(VI) from aqueous solutions

329

Improved performance of a dye-sensitized solar cell using a TiO2/ZnO/Eosin Y electrode

330

Improved performance of a metal hydride electrode for nickel/metal hydride batteries through copper-coating

331

Improved performance of a tubular microbial fuel cell with a composite anode of graphite fiber brush and graphite granules

332

Improved performance of aminopropylsilatrane over aminopropyltriethoxysilane as a linker for nanoparticle-based plasmon resonance sensors

333

Improved performance of ammonia-fueled solid oxide fuel cell with SSZ thin film electrolyte and Ni-SSZ anode functional layer

334

Improved performance of an activated multi-walled carbon nanotube polymer actuator, compared with a single-walled carbon nanotube polymer actuator

335

Improved performance of an engineering model cryogen free double adiabatic demagnetization refrigerator Original Research Article

336

Improved performance of Black-dye-sensitized solar cells with nanocrystalline anatase TiO2 photoelectrodes prepared from TiCl4 and ammonium carbonate

337

Improved performance of Brucella melitensis native hapten over Brucella abortus OPS tracer on goat antibody detection by the fluorescence polarization assay

338

Improved performance of Brucella melitensis native hapten over Brucella abortus OPS tracer on goat antibody detection by the fluorescence polarization assay

339

Improved performance of carbon nanotube buckypaper and ionic-liquid-in-Nafion actuators for rapid response and high durability in the open air

340

Improved performance of CdTe thin film solar cells through controlling the initial stage of the CdTe layer deposition by close-spaced sublimation

341

IMPROVED PERFORMANCE OF CIRCULARLY POLARIZED ANTENNA USING SEMI-PLANAR CHIRAL METAMATERIAL COVERS

342

Improved Performance of Companded OFDM System using Non Symmetric Approach

343

Improved performance of composite nanofiltration membranes by adding calcium chloride in aqueous phase during interfacial polymerization process

344

Improved performance of comprehensive two-dimensional HPLC separation of traditional Chinese medicines by using a silica monolithic column and normalization of peak heights

345

Improved performance of cross-flow ultrafiltration for the recovery and purification of Ca2+ conditioned lipopeptides in diafiltration mode of operation

346

Improved performance of Cu(In,Ga)Se2-based submodules with a stacked structure of ZnO window prepared by sputtering

347

Improved performance of dye-sensitized solar cells with compact TiO2 blocking layer prepared using low-temperature reactive ICP-assisted DC magnetron sputtering

348

Improved performance of dye-sensitized solar cells with surface-treated TiO2 as a photoelectrode

349

Improved performance of dye-sensitized solar cells: An TiO2–nano-SiO2 hybrid photoanode with post-treatment of TiCl4 aqueous solution

350

Improved performance of gravitational field-flow fractionation for screening wine-making yeast varieties

351

Improved performance of Li hybrid solid polymer electrolyte cells

352

Improved performance of lithium-ion cells with the use of fluorinated carbonate-based electrolytes

353

Improved performance of magnetically recoverable Ce-promoted Ni/Al2O3 catalysts for aqueous-phase hydrogenolysis of sorbitol to glycols

354

Improved performance of MEH-PPV/ZnO solar cells by addition of lithium salt

355

Improved performance of microbial fuel cells enriched with natural microbial inocula and treated by electrical current

356

Improved performance of micro-fabricated preconcentrators using silica nanoparticles as a surface template

357

Improved Performance of Multistage Lattice Vector Quantization with Hybrid Lattice Structure

358

Improved performance of organic light emitting diodes by pentacene as hole transporting layer

359

Improved performance of organic light-emitting diodes using advanced hole-transporting materials

360

Improved performance of organic light-emitting diodes with cesium chloride inside tris (8-hydroxyquinoline) aluminum

361

Improved Performance of PAN-based UF Membrane with PAN-g-PVA Amphiphilic Copolymer

362

Improved performance of Pd electrocatalyst supported on ultrahigh surface area hollow carbon spheres for direct alcohol fuel cells

363

Improved performance of polyaniline-uricase biosensor Original Research Article

364

Improved performance of porous bio-anodes in microbial electrolysis cells by enhancing mass and charge transport

365

Improved Performance of Preordered Fungal Protease—Stearic Acid Biocomposites: Enhanced Catalytic Activity, Reusability, and Temporal Stability

366

Improved performance of protein separation by continuous annular chromatography in the size-exclusion mode

367

Improved performance of PSO with self-adaptive parameters for computing the optimal design of Water Supply Systems

368

Improved performance of PSO with self-adaptive parameters for computing the optimal design of Water Supply Systems

369

Improved performance of Raney nickel electrode by the addition of electrically conductive materials for hydrogen oxidation reaction

370

Improved performance of rechargeable alkaline batteries via surfactant-mediated electrosynthesis of MnO2

371

Improved performance of reverse osmosis with dynamic layers onto membranes in separation of concentrated salt solutions

372

Improved performance of secondary heat exchanger for latent heat recovery from flue gas using mini-tubes

373

Improved performance of Si-based top-emitting organic light-emitting device using MoOx buffer layer

374

Improved Performance of Soil Microbial Fuel Cell by Adding Earthworms

375

Improved performance of solid-state dye-sensitized solar cells with p/p-type nanocomposite electrolyte

376

Improved performance of solution-processable OLEDs by silyl substitution to phosphorescent iridium complexes

377

Improved Performance of Subballast Stabilized Using Geocell for High Speed Train

378

Improved performance of the anion-exchange centrifugation technique for studies with human infective African trypanosomes

379

Improved performance of the greedy algorithm for partial cover

380

Improved performance of the JAERI injection and free electron laser system

381

Improved performance of the JAERI injection and free electron laser system

382

Improved performance of the microbial electrolysis desalination and chemical-production cell using the stack structure

383

Improved performance of the natural-gas-sweetening Benfield-HiPure process using process simulation

384

Improved performance of TiO2 electrodes coated with NiO by magnetron sputtering for dye-sensitized solar cells

385

Improved performance of TiO2 in the selective photo-catalytic oxidation of cyclohexane by increasing the rate of desorption through surface silylation

386

Improved performance of Yarrowia lipolytica lipase-catalyzed kinetic resolution of (R,S)-2-octanol by an integrated strategy of interfacial activation, bioimprinting and immobilization

387

Improved performance of ZnO nanostructured bulk heterojunction organic solar cells with nanowire-density modified by yttrium chloride introduction into solution

388

Improved performance using tungsten carbide/carbon nanofiber based anode catalysts for alkaline direct ethanol fuel cells

389

Improved Performances and Control of Beer Fermentation Using Encapsulated oc-Acetolactate Decarboxylase and Modeling

390

Improved performances in top-emitting organic light-emitting diodes based on a semiconductor zinc oxide buffer layer

391

Improved performances of 36 m small-angle neutron scattering spectrometer BATAN in Serpong Indonesia

392

Improved performances of 36 m small-angle neutron scattering spectrometer BATAN in Serpong Indonesia

393

Improved performances of red organic light-emitting devices by co-doping a rubrene derivative and DCJTB into tris-(8-hydroxyquinoline) aluminum host

394

Improved performances of the fast reactor calculational system ERANOS-ERALIB1 due to improved a priori nuclear data and consideration of additional specific integral data

395

Improved performances of the wind inlet of the Savonius rotor

396

Improved perfusion and contractile reserve after transmyocardial laser revascularization in a model of hibernating myocardium

397

Improved perinatal survival of monoamniotic twins with intensive inpatient monitoring

398

Improved permeate flux by flocculation of biological feeds: comparison between theory and experiment

399

Improved permeation performance of Pluronic F127–polyethersulfone blend ultrafiltration membranes

400

Improved Perovskite Solar Cell Performance Using Semitransparent CNT Layer

401

Improved personalized e-course Composition Approach using Modified Particle Swarm Optimization with Inertia- Coefficient

402

Improved perturbation estimates for the matrix equations X±A*X−1A=Q

403

Improved perturbation method and its application to the IIB matrix model Original Research Article

404

Improved pharmacokinetics, biodistribution and necrosis in vivo using a new near infra-red photosensitizer: tetrahydroporphyrin tetratosylat

405

Improved phase boundary for one-component vapor-liquid equilibrium: incorporating critical behavior and cubic equations of state

406

Improved phase stability and electrochemical performance of (Y,In,Ca)BaCo3ZnO7+δ cathodes for intermediate temperature solid oxide fuel cells

407

Improved phase vocoder time-scale modification of audio

408

Improved phase-change characteristics of Si doped GeSbTe thin films used for phase change memory

409

Improved phase-contrast flow quantification by three-dimensional vessel localization

410

Improved phase-coordinate Gauss-Seidel load flow algorithm

411

Improved phenol decomposition and simultaneous regeneration of granular activated carbon by the addition of a titanium dioxide catalyst under a dielectric barrier discharge plasma Original Research Article

412

Improved phenomenological model for an isothermal winemaking fermentation

413

Improved phenomenological renormalization schemes

414

Improved phosphorous gettering of multicrystalline silicon

415

Improved photo – Hydrogen production by transposon mutant of Rhodobacter capsulatus with reduced pigment

416

Improved photocatalytic activity and adsorption ability of mesoporous potassium-intercalated layered titanate

417

Improved photocatalytic activity of g-C3N4/TiO2 composites prepared by a simple impregnation method

418

Improved photocatalytic activity of highly ordered TiO2 nanowire arrays for methylene blue degradation

419

Improved photocatalytic activity of single crystal ZnO nanorod derived from highly effective P/N heterojunction

420

Improved photo-catalytic activity of single-crystalline TiO2 nanowires surrounded by Pt cube nanoparticles

421

Improved photocatalytic activity of Sn4+-doped and undoped TiO2 thin film coated stainless steel under UV- and VIS-irradiation Original Research Article

422

Improved photocatalytic and antibacterial activities of three-dimensional polycrystalline anatase TiO2 photocatalysts Original Research Article

423

Improved photocatalytic and gas sensing properties of α-Fe2O3 nanoparticles derived from β-FeOOH nanospindles

424

Improved Photocatalytic Degradation of Pharmaceutical Compounds from Aqueous Solutions Using Pd/Zno Nanocomposite as a Model of Environmental Applications

425

Improved photocatalytic deposition of palladium membranes

426

Improved photocatalytic hydrogen generation on Zn2GeO4 nanorods with high crystallinity

427

Improved photocatalytic performance of Pd-doped ZnO

428

Improved Photocatalytic Performance of ZnO through AgCu Bimetal Coupling for the Photodegradation of Nitrobenzene

429

Improved photoconversion from MoSe2 based PEC solar cells

430

Improved photodegradation activity of TiO2 via decoration with SnS2 nanoparticles

431

Improved photoelectrochemical detection of mercury (II) with a TiO2-modified composite photoelectrode

432

Improved photographic production of Pt nano-particles for fuel cell electrodes

433

Improved photoluminescence efficiency of films from conjugated polymers

434

Improved photoluminescence of BaMgAl10O17 blue phosphor prepared by spray pyrolysis

435

Improved photoluminescence of green-emitting phosphor Ca3Sc2Si3O12:Ce3+ for white light emitting diodes

436

Improved photoluminescence of ZnS:Mn nanocrystals by microwave assisted growth of ZnS shell

437

Improved photoluminescence properties of a new green SrB2O4:Tb3+ phosphor by charge compensation

438

Improved photoluminescence properties of oxidized anodically etched porous Zn

439

Improved photophysical property from electrospinning composite fibers doped with Re(I) complex: Construction, characterization and photophysical features

440

Improved photophysical property from electrospinning composite fibers doped with Re(I) complex: Construction, characterization and photophysical features

441

Improved photoreceptor decay characteristics of vanadyl-phthalocyanine films annealed under magnetic field

442

Improved photostability of hydrophobic natural dye incorporated in organo-modified hydrotalcite Original Research Article

443

Improved Photostabilization of Chlorpyrifos Insecticide with Novel Benzil Derivatives

444

Improved phototrophic H2 production with Rhodopseudomonas palustris WP3-5 using acetate and butyrate as dual carbon substrates

445

Improved photovoltaic effect of polymer solar cells on planarized 2D photonic crystals

446

Improved photovoltaic effect of polymer solar cells with nanoscale interfacial layers

447

Improved photovoltaic energy output for cloudy conditions with a solar tracking system

448

Improved photovoltaic method for measurement of minority carrier diffusion length applied to silicon solar cells

449

Improved photovoltaic performance of hybrid solar cells based on silicon nanowire and P3HT

450

Improved photovoltaic performance of hybrid solar cells based on silicon nanowire and P3HT

451

Improved photovoltaic performance of silicon nanowires/conjugated polymer hybrid solar cells

452

Improved photovoltaic performance of silicon nanowires/conjugated polymer hybrid solar cells

453

Improved photovoltaic properties of pentacene/N,N′-Dioctyl-3,4,9,10-perylenedicarboximide-based organic heterojunctions with thermal annealing

454

Improved photovoltaic self-consumption with appliance scheduling in 200 single-family buildings

455

Improved Physical and Mental Health After a Combined Lifestyle Intervention with Cognitive Behavioural Therapy for Obesity

456

Improved physicochemical characteristics of artemisinin-nicotinamide solid dispersions by solvent evaporation and freeze dried methods

457

Improved physicochemical properties and biocompatibility of stainless steel implants by PVA/ZrO2-based composite coatings

458

Improved Physicochemical Properties of Tapioca Starch / Bovine Gelatin Biodegradable Films with Zinc Oxide Nanorod

459

Improved phytase production by a thermophilic mould Sporotrichum thermophile in submerged fermentation due to statistical optimization

460

Improved phytoaccumulation of cadmium by genetically modified tobacco plants (Nicotiana tabacum L.). Physiological and biochemical response of the transformants to cadmium toxicity

461

Improved PID method of temperature control for adiabatic demagnetization refrigerators

462

Improved PID method of temperature control for adiabatic demagnetization refrigerators

463

Improved piezoelectric ceramic/polymer composites for hydrophone applications

464

Improved piezoelectric properties via mechano-chemical activation in modified PCT ceramics

465

Improved piezoelectric switch shunt damping technique using negative capacitance

466

Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio

467

Improved PIN diode circuit model with automatic parameter extraction technique

468

Improved p–i–n solar cells structure for narrow bandgap a-Si:H prepared by Ar* chemical annealing at high temperatures

469

Improved pinhole spatial filter

470

Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam

471

Improved plant growth with rock phosphate solubilized by Aspergillus niger grown on sugar-beet waste

472

Improved Plant Regeneration from Cell Suspensions of Commercial Cultivars, Breeding- and Inbred Lines of Perennial Ryegrass (Lolium perenne L.)

473

Improved plastic anisotropy of Mg–Zn–Ca alloys exhibiting high-stretch formability: A first-principles study

474

Improved plasticity and corrosion behavior in Ti–Zr–Cu–Pd metallic glass with minor additions of Nb: An alloy composition intended for biomedical applications

475

Improved plasticity and fracture toughness in metallic glasses via surface crystallization

476

Improved plasticity of bulk metallic glasses by electrodeposition

477

Improved plasticity of iron-based high-strength bulk metallic glasses by copper-induced nanocrystallization

478

Improved plastisol flow and reduced level of plasticiser in paste poly(vinyl chloride) formulations

479

Improved plastisol flow and reduced level of plasticiser in paste poly(vinyl chloride) formulations

480

Improved platinization conditions produce a 60-fold increase in sensitivity of amperometric biosensors using glucose oxidase immobilized in poly-o-phenylenediamine

481

Improved Platinum-Group Element Extraction by NiS Fire Assay from Chromitite Ore Samples Using a Flux Containing Sodium Metaphosphate

482

Improved PLS regression based on SVM classification for rapid analysis of coal properties by near-infrared reflectance spectroscopy

483

Improved Poincaré inequalities with weights ✩

484

Improved point and interval estimation for a beta regression model

485

Improved point center algorithm for K-Means clustering to increase software defect prediction

486

Improved Poisson Intensity Estimation: Denoising Application Using Poisson Data

487

Improved polarization-mode-dispersion tolerance in duobinary transmission

488

Improved poloidal convergence of the MARS code for MHD stability analysis Original Research Article

489

Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC

490

Improved polyHEMA–DAQ films for the optical analysis of nitrite

491

Improved polymer nanocomposite dielectric breakdown performance through barium titanate to epoxy interface control

492

Improved polymerization efficiency of methacrylate-based cements containing an iodonium salt

493

Improved polynomial approximations for the solution of nonlinear integral equations

494

Improved polynomialalgorithmsforrobustbottleneckproblemswithintervaldata

495

Improved poly-γ-glutamic acid production by chromosomal integration of the Vitreoscilla hemoglobin gene (vgb) in Bacillus subtilis

496

Improved Population Health in Iran from 1979 to 2019; Decreasing Mortality Rates and Increasing Life Expectancy

497

Improved pore space structure characterization by fusion of relaxation tomography maps

498

Improved porous silicon microarray based prostate specific antigen immunoassay by optimized surface density of the capture antibody Original Research Article

499

Improved Pose Estimation for Mobile Robots by Fusion of Odometry Data and Environment Map

500

Improved position for the flexible laryngeal mask

501

Improved positive electrospray ionization of patulin by adduct formation: Usefulness in liquid chromatography–tandem mass spectrometry multi-mycotoxin analysis

502

Improved Possibilistic C-Means Clustering Algorithms

503

Improved posterobasal segment function after thrombolysis is associated with decreased incidence of significant mitral regurgitation in first inferior myocardial infarction

504

Improved post-myocardial infarction survival with probucol in rats: Effects on left ventricular function, morphology, cardiac oxidative stress and cytokine expression

505

Improved potassium-selective membrane using valinomycin as ionophore for ion-selective microdevices

506

Improved potential function for HOO−/OOH− isomerization

507

Improved potentiometric response of all-solid-state Pb2+-selective electrode

508

Improved potentiometric response of solid-contact lanthanum (III) selective electrode Original Research Article

509

Improved powder X-ray data for cancrinites IV: Franzinite

510

Improved powder X-ray data for the cement phase Ca12O32F2 (C11A7f)

511

Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive

512

Improved power factor in a low-cost PWM single phase inverter using genetic algorithms

513

Improved power generation performance of solid oxide fuel cells using doped LaGaO3 electrolyte films prepared by screen printing method II. Optimization of Ni–Ce0.8Sm0.2O1.9 cermet anode support

514

Improved power quality converter fed permanent magnet AC motor for air-conditioning

515

Improved power quality in a single-phase PWM inverter voltage with bipolar notches through the hybrid genetic algorithms

516

Improved Power System Dynamic Stability by DFIG in the Presence of SSSC Using Adaptive Nonlinear Multi-Input Backstepping

517

Improved precipitation of gibbsite from sodium aluminate solution by adding methanol

518

Improved precision of virtual height measurements with coherent radio pulse sounding based on the maximum likelihood method Original Research Article

519

Improved Precoding Method for PAPR Reduction in OFDM with Bounded Distortion

520

Improved pre-concentration and detection methods for volatile sulphur breath constituents

521

Improved Prediction and Mapping of Soil Copper by Kriging with Auxiliary Data for Cation-Exchange Capacity

522

Improved prediction and tracking of volcanic ash clouds

523

Improved prediction of biomass composition for switchgrass using reproducing kernel methods with wavelet compressed FT-NIR spectra

524

Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm

525

Improved prediction of early-onset coronary artery disease using APOE ε4, BChE-K, PPARγ2 Pro12 and ENOS T-786C in a polygenic model

526

Improved prediction of proximal femoral fracture load using nonlinear finite element models

527

Improved Prediction of Signal Peptides: SignalP 3.0

528

Improved prediction of simultaneous local and overall buckling of stiffened panels

529

Improved prediction of springback on final formed components

530

Improved prediction of stability lobes with extended multi frequency solution

531

Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate

532

Improved prediction of turbulent separated flow with a low-Reynolds-number Nonlinear κ − ε model

533

Improved predictions of equatorial TEC for real time applications Original Research Article

534

Improved predictions of saturated and unsaturated zone drawdowns in a heterogeneous unconfined aquifer via transient hydraulic tomography: Laboratory sandbox experiments

535

Improved predictions of the standard model and the detection of new physics in neutron beta decay

536

Improved predictions penalizing both slope and curvature in additive models

537

IMPROVED PREDICTIVE POWER CONTROL OF CDMA SYSTEM IN RAYLEIGH FADING CHANNEL

538

Improved predictor–corrector method for solving fuzzy initial value problems

539

Improved predictors in survey sampling under a super population model

540

Improved pregnancy rates for obese, infertile women following a group treatment program an open pilot study

541

Improved preliminary test and Stein-rule Liu estimators for the ill-conditioned elliptical linear regression model

542

Improved preparation and structural investigation of 4-aryl-4-oxo-2-hydroxy-2-butenoic acids and methyl esters

543

Improved preparation and synthetic uses of 3-deoxy-d-arabino-hexonolactone: an efficient synthesis of Leptosphaerin

544

Improved preparation of (±)-(1,3/2,4)-5-cyclohexene-1,2,3,4-tetrol [(±)-conduritol-B] and its reaction with hydrobromic and hydrochloric acid; synthesis and characterisation of some (±)-1-deoxy-1-halo- and (±)-1,4-dideoxy-1,4-dihaloconduritols

545

Improved preparation of 2,3:5,6:3′,4′-tri-O-isopropylidenelactose dimethyl acetal and its 6′-O-(1-methoxy-1-methylethyl) derivative

546

Improved preparation of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3,3,1] nonane (DPT) from urea

547

Improved preparation of alkyl 2-(3-indolyl)-3-nitroalkanoates under fully heterogeneous conditions: stereoselective synthesis of alkyl (E)-2-(3-indolyl)-2-alkenoates

548

Improved preparation of immobilized trypsin on superparamagnetic nanoparticles decorated with metal ions

549

Improved preparation of indenyl molybdenum(II) and tungsten(II) compounds

550

Improved Preparation of Macroporous, Chlorosulfonated Poly(styrene-co-divinylbenzene) and Conversion to Sulfonamides and Sulfonylhydrazines

551

Improved preparation of membrane surfaces for field-emission scanning electron microscopy

552

Improved preparation of perallylated cyclodextrins: facile synthesis of cyclodextrin-based polycationic and polyanionic compounds Original Research Article

553

Improved preparation of polybenzo[c]thiophene-modified electrodes employing p-toluenesulfonate as dopant anion

554

Improved preparation of small biological samples for mercury analysis using cold vapor atomic absorption spectroscopy

555

Improved preparation of tosyldiazomethane

556

Improved preparative route toward 3-arylcyclopropenes

557

Improved pretreatment of lignocellulosic biomass using enzymatically-generated peracetic acid

558

Improved Price Indexes for Real Estate: Measuring the Course of Swedish Housing Prices

559

Improved principal component monitoring using the local approach

560

Improved principal component monitoring of large-scale processes

561

Improved priority access, bandwidth allocation and traffic scheduling for DOCSIS cable networks

562

Improved probabilistic method for power system dynamic stability studies

563

Improved probabilistic quantification of drift demands for seismic evaluation

564

Improved probiotic viability in stress environments with post-culture of alginate–chitosan microencapsulated low density cells

565

Improved procedural results of coronary stenting with focal balloon “overexpansion” — final core lab analysis from the prospective, multicenter OSTI-2 trial

566

Improved procedure for cyclization of vinyl azides into 3-substituted-2H-azirines

567

Improved procedure for equivalent linearization of bridges supported on hysteretic isolators

568

Improved procedure for obtaining statistically valid parameter estimates from soil respiration data

569

Improved procedure for obtaining statistically valid parameter estimates from soil respiration data

570

Improved procedure for screening expression libraries for novel autoantigens

571

Improved procedure for the computation of Lamb’s coefficients in the physalis method for particle simulation

572

Improved procedure for the determination of malonaldehyde by gas-chromatography with electron-capture detection as 2,4,6-trichlorophenylhydrazine derivative

573

Improved procedure for the enantioselective synthesis of dihydrooxazolo and dihydrothiazolo ring-fused 2-pyridones

574

Improved procedure for the hydrotelluration of alkynes

575

Improved procedure for the room temperature asymmetric phase-transfer mediated epoxidation of α,β-unsaturated ketones

576

Improved procedure for the separation of major stratum corneum lipids by means of automated multiple development thin-layer chromatography

577

Improved procedure for the synthesis of thiazolium-type peptide coupling reagents: BMTB as a new efficient reagent

578

Improved procedure for the the determination of rofecoxib in human plasma involving 96-well solid-phase extraction and fluorescence detection

579

Improved procedures for the Beckmann rearrangement: the reaction of ketoxime carbonates with boron trifluoride etherate

580

Improved procedures for the laboratory study of high-temperature viscoelastic relaxation

581

Improved procedures for the selective chemical fragmentation of rhamnogalacturonans Original Research Article

582

Improved Process Design and Quality for Gear Manufacturing with Flat and Round Rolling

583

Improved process for decontamination of whey by a continuous flow-through pulsed light system

584

Improved Process for Floodplain Delineation from Digital Terrain Models

585

Improved Process for the Enantioselective Hydrolysis of Prochiral Diethyl Malonates Catalyzed by Pig Liver Esterase

586

Improved process for the production of cellulose sulfate using sulfuric acid/ethanol solution

587

Improved process for the TlBr single-crystal detector

588

Improved process for the TlBr single-crystal detector

589

Improved process monitoring and supervision based on a reliable multi-stage feature-based pattern recognition technique

590

Improved processes of light hydrocarbon separation from LNG with its cryogenic energy utilized

591

Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids

592

Improved processing of carbon nanotube/magnesium alloy composites

593

Improved processing of harmonics and interharmonics by time-domain averaging

594

Improved production by fed-batch cultivation and some properties of Cu/Zn-superoxide dismutase from the fungal strain Humicola lutea 103

595

Improved production of alkaline protease from a mutant of alkalophilic Bacillus pantotheneticus using molasses as a substrate

596

Improved production of butyl butyrate with lipase from Thermomyces lanuginosus immobilized on styrene–divinylbenzene beads

597

Improved production of chitin from shrimp waste by fermentation with epiphytic lactic acid bacteria

598

Improved production of heterologous lipase in Trichoderma reesei by RNAi mediated gene silencing of an endogenic highly expressed gene

599

Improved production of l-asparaginase by Bacillus brevis cultivated in the presence of oxygen-vectors

600

Improved production of mycelial biomass and ganoderic acid by submerged culture of Ganoderma lucidum SB97 using complex media

601

Improved Production of Pharmacologically-active Sclerotiorin by Penicillium sclerotiorum

602

Improved production of phenylethanoid glycosides by Cistanche deserticola cells cultured in an internal loop airlift bioreactor with sifter riser

603

Improved production of p-hydroxycinnamic acid from tyrosine using a novel thermostable phenylalanine/tyrosine ammonia lyase enzyme

604

Improved Production of Recombinant Human Activin A in Escherichia coli

605

Improved production of reducing sugars from rice husk and rice straw using bacterial cellulase and xylanase activated with hydroxyapatite nanoparticles

606

Improved Production of Rhamnolipids by a Pseudomonas aeruginosa Mutant

607

Improved production of short-chain fatty acids from waste activated sludge driven by carbohydrate addition in continuous-flow reactors: Influence of SRT and temperature

608

Improved production of the anticancer compound 1403C by glucose pulse feeding of marine Halorosellinia sp. (No. 1403) in submerged culture

609

Improved production of ZnS blue phosphor powder

610

Improved productivity through failure analysis: Case studies in precision forging of aerospace components

611

Improved productivity using a modified table formwork system for high-rise building in Korea

612

Improved profile likelihood inference

613

Improved profile of bad phosphorylation and caspase 3 activation after blood versus crystalloid cardioplegia

614

Improved Profitability and Competition in Two Level Supply Chain by Non-Cooperative Games

615

Improved prognosis following peritonectomy procedures and hyperthermic intraperitoneal chemotherapy for peritoneal carcinomatosis from appendiceal carcinoma

616

Improved prognosis for biomarkers in breast cancer

617

Improved prognosis of heart failure due to idiopathic dilated cardiomyopathy in children

618

Improved prognosis of postoperative hepatocellular carcinoma patients when treated with functional foods: a prospective cohort study

619

Improved project management through improved document management

620

Improved Projection for Cylindrical Algebraic Decomposition

621

Improved proof of the no-ghost theorem for fermion states of the superstring Original Research Article

622

Improved properties and microstructure of porous silicon nitride/silicon oxide composites prepared by sol–gel route

623

Improved properties of amorphous calcium phosphate fillers in remineralizing resin composites

624

Improved properties of GRC composites using commercial E-glass fibers with new coatings

625

Improved properties of hydroxyapatite–carbon nanotube biocomposite: Mechanical, in vitro bioactivity and biological studies

626

Improved properties of Pulsed Laser Deposited YBaCuO on NdGaO3 using CeO2 template layers

627

Improved properties of the long arc generator (LARGE)

628

Improved properties of the non-covalent coating with N,N-didodecyl-N, N-dimethylammonium bromide for the separation of basic proteins by capillary electrophoresis with acidic buffers in 25 μm capillaries

629

Improved properties of TiAlN coatings through the multilayer structure

630

Improved Properties of Weathered Coal and SBRIWeathered Coal Compound Modified Asphalt.

631

Improved propionic acid production from glycerol with metabolically engineered Propionibacterium jensenii by integrating fed-batch culture with a pH-shift control strategy

632

Improved propionic acid production from glycerol: Combining cyclic batch- and sequential batch fermentations with optimal nutrient composition

633

Improved propionic acid production with metabolically engineered Propionibacterium jensenii by an oxidoreduction potential-shift control strategy

634

Improved prostate cancer control with the use of HDR brachytherapy boost

635

Improved prostate cancer detection with anterior apical prostate biopsies

636

Improved protection from velogenic Newcastle disease virus challenge following multiple immunizations with plasmid DNA encoding for F and HN genes

637

Improved protection from velogenic Newcastle disease virus challenge following multiple immunizations with plasmid DNA encoding for F and HN genes

638

Improved protection of the consumer community against food-transmitted diseases with a microbial aetiology: A pivotal food safety issue calling for a precautionary approach

639

Improved protein-adsorption resistance of polyethersulfone membranes via surface segregation of ultrahigh molecular weight poly(styrene-alt-maleic anhydride)

640

Improved proteomic discovery by sample pre-fractionation using dual-column ion-exchange high performance liquid chromatography

641

Improved protocol for isolation of genomic DNA from leaf tissues of Phyllanthus emblica Gaertn

642

Improved protocol for the formation of N-(p-nitrobenzyloxy)aminoalditol derivatives of oligosaccharides

643

Improved protocol for the synthesis of functionalized triphenylene ketals

644

Improved protocols for quantitative determination of metabolites from biological samples using high performance ionic-exchange chromatography with conductimetric and pulsed amperometric detection

645

Improved Protocols for the Molybdenum-Catalyzed Hydrostannation of Alkynes

646

Improved proton spectroscopic U-FLARE imaging for the detection of coupled resonances in the rat brain in vivo

647

Improved proximate time-optimal sliding-mode control of hard disk drives

648

Improved pseudo-capacitive performance of manganese oxide films synthesized by the facile sol–gel method with iron acetate addition

649

Improved psychomotor performance in aged mice fed diet high in antioxidants is associated with reduced ex vivo brain interleukin-6 production

650

Improved Pt-Ni nanocatalysts for dry reforming of methane Original Research Article

651

Improved Pulmonary Adaptation in Newborn Calves with Postnatal Acidosis

652

Improved pulsed broadband ultrasonic spectroscopy for analysis of liquid-particle flow

653

Improved purification for thermophilic F1F0 ATP synthase using n-dodecyl β-d-maltoside

654

Improved purification of the membrane-bound hydrogenase–sulfur-reductase complex from thermophilic archaea using ϵ-aminocaproic acid-containing chromatography buffers

655

Improved purification of β-lactoglobulin from acid whey by means of ceramic hydroxyapatite chromatography with sodium fluoride as a displacer

656

Improved purity assessment of high-performance liquid chromatography diode array detection data for overcoming the presence of the non-linearity artefact

657

Improved PV/T solar collectors with heat extraction by forced or natural air circulation

658

Improved QCD form factor constraints and Γb → Γcℓν Original Research Article

659

Improved QCM-D signal-to-noise ratio using mesoporous silica and titania

660

Improved q-rung orthopair and T-spherical fuzzy sets

661

Improved QSPR generalized interaction parameters for the nonrandom two-liquid activity coefficient model

662

Improved QSS-μPCD measurement with quality of decay control: Correlation with steady-state carrier lifetime

663

Improved quality and energy performance of a fixed-bed longan dryer by thermodynamic modifications Original Research Article

664

Improved quality and storage of rice flour (MR 220) by rice bran

665

Improved quality control charts for monitoring the process mean, using double-ranked set sampling methods

666

Improved quality control in gas chromatography interfaced to stable isotope ratio mass spectrometry by application of derivative chromatography Original Research Article

667

Improved quality of input data for maintenance optimization using expert judgment

668

Improved Quality of Life in A Case of Cerebral Palsy after Bone Marrow Mononuclear Cell Transplantation

669

Improved quality of life in patients with partial seizures after conversion to oxcarbazepine monotherapy

670

Improved quality of life with cardiac rehabilitation in post-myocardial infarction patients

671

Improved quality of life with jejunal pouch reconstruction after total gastrectomy

672

Improved quality of polycrystalline diamond grown by two-stage growth in microwave plasma chemical vapor deposition

673

Improved quality of polycrystalline diamond grown by two-stage growth in microwave plasma chemical vapor deposition

674

Improved quality of reconstructed images using floating point arithmetic for moment calculation

675

Improved quantification limits in chiral capillary electrochromatography by peak compression effects

676

Improved quantification of active soil microfauna by a "counting crew"

677

Improved quantification of aggregated bacteria by combined enzymatic and mechanical treatment of flocs and biofilm from a rotating drum bioreactor

678

Improved quantification of grain boundary segregation by EDS in a dedicated STEM

679

Improved quantification of grain boundary segregation by EDS in a dedicated STEM

680

Improved quantification of salivary gland scintigraphy by means of factor analysis

681

Improved quantification of stress proteins by western blotting

682

Improved quantile inference via fixed-smoothing asymptotics and Edgeworth expansion

683

Improved quantile inference via fixed-smoothing asymptotics and Edgeworth expansion

684

Improved quantitation in 3QMAS of spin 5/2 nuclei by RF power modulation of FAM-II

685

Improved quantitative detection of 11 urinary phthalate metabolites in humans using liquid chromatography–atmospheric pressure chemical ionization tandem mass spectrometry

686

Improved quantitative ion chromatography of industrial sugars: removal of interfering amino acids

687

Improved quantitative method for fludarabine in human plasma by liquid chromatography and tandem mass spectrometry

688

Improved quantitative solution state 13C NMR analysis of ethylene-1-octene copolymers

689

Improved quantitative structure–activity relationship models to predict antioxidant activity of flavonoids in chemical, enzymatic, and cellular systems Original Research Article

690

Improved Quantity and Quality of Life: A Winning Combination to Treat Advanced Heart Failure

691

Improved quantum-inspired evolutionary algorithm with diversity information applied to economic dispatch problem with prohibited operating zones

692

Improved quarter-point crack tip element

693

Improved quasi-orthogonal codes through constellation rotation

694

Improved Quasi-Path Restoration in Mesh Networks

695

Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications

696

Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications

697

Improved radial basis function methods for multi-dimensional option pricing

698

Improved radial dose function estimation using current version MCNP Monte-Carlo simulation: Model 6711 and ISC3500 125I brachytherapy sources

699

Improved radial heat sink for led lamp cooling

700

Improved radiation damage tolerance of titanium nitride ceramics by introduction of vacancy defects

701

Improved radiation hardness to low-energy protons for oxygenated Si detectors with thermal donors

702

Improved radiation hardness to low-energy protons for oxygenated Si detectors with thermal donors

703

Improved radiation measurements on JET – First results from an upgraded bolometer system

704

Improved radiation tolerance of MAPS using a depleted epitaxial layer

705

Improved radiation tolerance of MAPS using a depleted epitaxial layer

706

Improved radio occultation sounding of the Arctic atmosphere using simulations with a high resolution atmospheric model

707

Improved radioiodination of 1,2-dipalmitoyl-3-IPPA via a tributyltin intermediate

708

Improved radioiodination of biomolecules using exhaustive Chloramine-T oxidation

709

Improved radiometabolite analysis procedure for positron emission tomography (PET) radioligands using a monolithic column coupled with direct injection micellar/high submicellar liquid chromatography

710

Improved rainfall estimation over the Indian region using satellite infrared technique Original Research Article

711

Improved Rainfall Runoff Estimates Using Remotely Sensed Soil Moisture

712

Improved range image segmentation by analyzing surface fit patterns

713

Improved rank-based dependence measures for categorical data

714

Improved Rapid Preparation of Polyelectrolyte-protected Gold Nanoparticles through a Microwave-based Thermal Process

715

Improved rapidly-quenched hydrogen-absorbing alloys for development of improved-capacity nickel metal hydride batteries

716

Improved rate capability of lithium-ion batteries with Ag nanoparticles deposited onto silicon/carbon composite microspheres as an anode material

717

Improved rate control for electron-beam evaporation and evaluation of optical performance improvements

718

Improved ratio estimators of variance based on robust measures

719

Improved rational hydrograph method

720

Improved reaction pattern of an endoglycanase from Paenibacillus cookii for chitosan oligosaccharide production

721

Improved reaction time method, information processing speed, and intelligence

722

Improved reactivity of large coal particles by K2CO3 addition during steam gasification

723

Improved Real-Coded GA for Groundwater Bioremediation

724

Improved real-time RT-PCR assays of two colorectal cancer peripheral blood mRNA biomarkers: A pilot study

725

Improved rechargeability of manganese oxide cathodes in alkaline cells in the presence of TiB2 and TiS2

726

Improved recognition of alkylammonium salts by ion pair recognition based on a novel heteroditopic pillar[5]arene receptor

727

Improved reconstruction of palaeo-environments through unravelling of preserved vegetation biomarker patterns

728

Improved rectangular method on stochastic Volterra equations

729

Improved Recursive Algorithm for Light Scattering by a Multilayered Sphere

730

Improved recursive Newton-type algorithm for frequency and spectra estimation in power systems

731

Improved recursive Newton-type algorithm for power system relaying and measurement

732

Improved recycling of livestock slurries on maize by means of a modular tanker and spreader

733

Improved recycling with life cycle information tagged to the product

734

Improved reduced-bias tail index and quantile estimators

735

Improved refined plastic hinge analysis accounting for strain reversal

736

Improved refined plastic-hinge analysis accounting for local buckling

737

Improved refining properties of pulps pretreated with ionic liquids under mild conditions

738

Improved Regeneration Efficiency from Mature Embryos of Barley Cultivars

739

Improved regionalization of streamflow by use of the streamflow equivalent of precipitation as an explanatory variable

740

Improved regioselective mononitration of toluene over ZSM-5 zeolite catalysts

741

Improved relations for vibrational relaxation in gases

742

Improved relay auto-tuning with static load disturbance

743

Improved reliability for echocardiographic measurement of left ventricular volume using harmonic power imaging mode combined with contrast agent

744

Improved reliability modeling using Bayesian networks and dynamic discretization

745

Improved reliability modeling using Bayesian networks and dynamic discretization

746

Improved reliability of leucite reinforced glass by ion exchange

747

Improved reliability of low-temperature polysilicon TFT by post-annealing gate oxide

748

Improved reliability of wind turbine towers with tuned liquid column dampers (TLCDs)

749

Improved reliable approach to predict melting points of energetic compounds

750

Improved remote sensing detection of soil salinity from a semi-arid climate in Northeast Brazil

751

Improved removal of Trinitrotoluene (TNT) from contaminated soil by inducing aerobic process: kinetic and chemical byproducts

752

Improved reoxidation tolerance of Ni–Fe metal support for LaGaO3 thin film electrolyte cell

753

Improved Repeatability of Pulsed Field Magnetometry Measurements Through Peltier Effect Temperature Control of Measurement Coils Original Research Article

754

Improved replicon cellular activity of non-nucleoside allosteric inhibitors of HCV NS5B polymerase: From benzimidazole to indole scaffolds

755

Improved representation of generator and load dynamics in the study of voltage limited power system operations

756

Improved representation of topographic effects by a vertical adaptive grid in vector-ocean-model (VOM). Part I: Generation of adaptive grids

757

Improved representation of topographic effects by a vertical adaptive grid in Vector-Ocean-Model (VOM). Part II: Simulations in unstructured adaptive grids

758

Improved representations of misorientation information for grain boundary science and engineering

759

Improved reproducibility in scanning capacitance microscopy for quantitative 2D carrier profiling on silicon

760

Improved reproducibility in the determination of the molecular weight of chitosan by analytical size exclusion chromatography

761

Improved reproducibility in the determination of the molecular weight of chitosan by analytical size exclusion chromatography

762

Improved reproducibility of broadband ultrasound attenuation of the os calcis by using a specific region of interest

763

Improved reproducibility of chemical reactions on purified polystyrene resins monitored by 31P MAS NMR

764

Improved reproducibility of high-resolution peripheral quantitative computed tomography for measurement of bone quality

765

Improved reproducibility of magnetic stimulation-evoked motor potentials in the human masseter by a new method for locating stimulation sites on the scalp

766

Improved Residents’ Knowledge after an Advanced Regional Anesthesia Education Program

767

Improved residual method for approximating Bratu problem

768

Improved Resistance Management for Durable Disease Control: A Case Study of Phoma Stem Canker of Oilseed Rape (Brassica napus)

769

Improved resistance of alumina to mild wear by aluminium titanate additions

770

Improved resistance to serum oxidation in Gilbertʹs syndrome: A mechanism for cardiovascular protection

771

Improved resistive switching properties in stacked structures

772

Improved resolution for a multi-fringe phase detection circuit of a far infrared laser interferometer on LHD

773

Improved resolution in dipolar NMR spectra using constant time evolution PISEMA experiment

774

Improved resolution in HREELS using maximum-entropy deconvolution: CO on PtxNi1−x(111)

775

Improved resolution of serum bisalbumin on electrophoresis and investigation of bisalbumin in urine

776

Improved resolution of the multiple inverse method by eliminating erroneous solutions

777

Improved Respirator for Protection Against Exposure to Airborne Viruses

778

Improved response characteristics of SnO2 thin film loaded with nanoscale catalysts for LPG detection

779

Improved response factor methods for seismic fragility of reactor building Original Research Article

780

Improved response function calculations for scintillation detectors using an extended version of the MCNP code

781

Improved response function calculations for scintillation detectors using an extended version of the MCNP code

782

Improved response function for the Simplex optimization of piecewise linear discriminants

783

Improved response matrices of Bonner sphere spectrometers with 6LiI scintillation detector and 3He proportional counter between 15 and 100 MeV

784

Improved response modeling based on clustering, under-sampling, and ensemble

785

Improved response of CdO nanorods towards liquefied petroleum gas (LPG): Effect of Pd sensitization

786

Improved response surface method and its application to stiffened plate reliability analysis

787

Improved Results for Postcardiotomy Cardiogenic Shock With the Use of Implantable Left Ventricular Assist Devices

788

Improved results in supersymmetric electroweak baryogenesis Original Research Article

789

Improved results in the management of surgical candidates with lung cancer

790

Improved results on estimating and extending the radius of an attraction ball

791

Improved results on model reduction for Markovian jump systems with partly known transition probabilities

792

Improved results on stability of continuous-time switched positive linear systems

793

Improved results on the 0–1 multidimensional knapsack problem

794

Improved Results Treating Lung Allograft Failure With Venovenous Extracorporeal Membrane Oxygenation

795

Improved resuscitation training of senior house officers in oral and maxillofacial surgery

796

Improved retention of imidacloprid (Confidor®) in soils by adding vermicompost from spent grape marc

797

Improved retrieval effectiveness by efficient combination of term proximity and zone scoring: A simulation-based evaluation

798

Improved Retrieval of Online Images via Site Operator: Findings at a Website Level

799

Improved retrieval of sea ice total concentration from spaceborne passive microwave observations using numerical weather prediction model fields: An intercomparison of nine algorithms

800

Improved retrievals of cloud boundaries from MODIS for use in air quality modeling

801

Improved retrievals of the optical properties of cirrus clouds by a combination of lidar methods

802

Improved reverse analysis for material characterization with dual sharp indenters

803

Improved reverse thermo-responsive polymeric systems

804

Improved reversed-phase gradient retention modeling

805

Improved reversibility in aged porous silicon NO2 sensors

806

Improved reversibility of color changes in electrochromic Ni–Al layered double hydroxide films in presence of electroactive anions

807

Improved reversible dehydrogenation of LiBH4–MgH2 composite by the synergistic effects of Al and MgO

808

Improved reversible dehydrogenation properties of 2LiBH4–MgH2 composite by milling with graphitic carbon nitride

809

Improved reversible dehydrogenation properties of LiBH4–MgH2 composite by tailoring nanophase structure using activated carbon

810

Improved reversible hydrogen storage of LiAlH4 by nano-sized TiH2

811

Improved RF modeling techniques for enhanced AlGaN/GaN HFETs

812

Improved Rheological Model of OilBased Drilling Fluid for Southwestern Iranian Oilfields

813

Improved ridge estimators in a linear regression model

814

Improved Riemann solvers for complex transport in two-dimensional unsteady shallow flow

815

Improved right heart function with a compliant inflow artificial lung in series with the pulmonary circulation

816

Improved right ventricular–vascular coupling during active pulmonary hypertension

817

Improved rigorous coupled-wave analysis for polar magnetic gratings Original Research Article

818

Improved Risk Assessment for Abdominal Aortic Aneurysm Rupture: Off-the-Wall Imaging

819

Improved Ritter reaction with CF3-containing oxirane for an access to central units of protease inhibitors

820

Improved road traffic emission inventories by adding mean speed distributions

821

Improved robust absolute stability criteria for uncertain time-delay systems

822

Improved robust backstepping adaptive control for nonlinear discrete-time systems without overparameterization

823

Improved robust Bayes estimators of the error variance in linear models

824

Improved robust H2 and H∞ filtering for uncertain discrete-time systems

825

Improved robustness and consistency of 3D contact algorithms based on a dual mortar approach

826

Improved room-temperature hydrogen sensing performance of directly formed Pd/WO3 nanocomposite

827

Improved rotary vane expander for trans-critical CO2 cycle by introducing high-pressure gas into the vane slots

828

Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors

829

Improved rounding procedures for the discrete version of the capacitated EOQ problem

830

Improved route planning and scheduling of waste collection and transport

831

Improved Routh-Pade approximants: a computer-aided approach

832

Improved routine speciation of organotin compounds in environmental samples by pulsed flame photometric detection

833

Improved RP-HPLC method to determine neferine in dog plasma and its application to pharmacokinetics

834

Improved RSA accuracy with DLT and balanced calibration marker distributions with an assessment of initial-calibration

835

Improved ruggedness for flow-based kinetic methods of analysis

836

Improved Runge-Kutta Methods for Solving Ordinary Differential Equations

837

Improved RuO4-catalysed oxidative cyclisation of geraniol-type 1,5-dienes to cis-2,5-bis(hydroxymethyl)tetrahydrofuranyldiols

838

Improved salt tolerance in canola (Brasica napus) plants by overexpression of Arabidopsis Na+/H+ antiporter gene AtNHX1

839

Improved salt tolerance of jute plants expressing the katE gene from Escherichia coli

840

Improved sample complexity estimates for statistical learning control of uncertain systems

841

Improved sample preparation and rapid UHPLC analysis of SO2 binding carbonyls in wine by derivatisation to 2,4-dinitrophenylhydrazine

842

Improved sample preparation for the quantitative analysis of paroxetine in human plasma by stable isotope dilution negative ion chemical ionisation gas chromatography–mass spectrometry

843

Improved sample treatment and chromatographic method for the determination of isoflavones in supplemented foods

844

Improved sample treatment for the determination of bisphenol A and its chlorinated derivatives in sewage sludge samples by pressurized liquid extraction and liquid chromatography–tandem mass spectrometry

845

Improved sample treatment for the determination of insoluble soap in sewage sludge samples by liquid chromatography with fluorescence detection

846

Improved sampling methods document decline in soil organic carbon stocks and concentrations of permanganate oxidizable carbon after transition from swidden to oil palm cultivation

847

Improved sampling techniques for baked clay and soft sediments

848

Improved sand surface element for residual stress determination

849

Improved satisfaction of university faculty by utilizing the Bat metaheuristic algo- rithm (Case study of the faculty of humanities, Islamic Azad University, Parand Branch)

850

Improved Saturation Relay Test for Systems with Large Dead Time

851

Improved scalar shift correlation NMR spectroscopy in solids

852

Improved scaling rules for bandgaps in graphene nanomeshs

853

Improved scaling technique for two-phase pressure—saturation relationships

854

Improved scene classification using efficient low-level features and semantic cues

855

Improved Scene Reconstruction from Range Images

856

Improved scheme of chelation ion chromatography with a mixed eluent for the simultaneous analysis of transition metals at μg l−1 levels

857

Improved scintillation proportionality and energy resolution of LaBr3:Ce at 80 K

858

Improved scintillation proportionality and energy resolution of LaBr3:Ce at 80 K

859

Improved scintimammography using a high-resolution camera mounted on an upright mammography gantry

860

Improved scintimammography using a high-resolution camera mounted on an upright mammography gantry

861

Improved score tests for one-parameter exponential family models

862

Improved screening capabilities in forensic toxicology by application of liquid chromatography–tandem mass spectrometry Original Research Article

863

Improved Screening for Breast Cancer Associated with a Telephone-Based Risk Assessment

864

Improved screening for methyldibromoglutaronitrile allergy

865

Improved screening method for the detection of a range of nitroimidazoles in various matrices by optical biosensor Original Research Article

866

Improved Screening of cDNAs Generated by mRNA Differential Display Enables the Selection of True Positives and the Isolation of Weakly Expressed Messages

867

Improved screening procedure for biogenic amine production by lactic acid bacteria

868

Improved Sea Ice Parcel Trajectories in the Arctic via Data Assimilation

869

Improved sea level anomaly prediction through combination of data relationship analysis and genetic programming in Singapore Regional Waters

870

Improved sealing treatments for thick thermal barrier coatings

871

Improved search heuristics for the sa-tree

872

Improved seawater intake and pre-treatment system based on Neodren technology Original Research Article

873

Improved secretion of Candida antarctica lipase B with its native signal peptide in Pichia pastoris

874

Improved sectoral allocation of NMVOC emissions from solvent use in Greece Original Research Article

875

Improved Secure Searchable Asymmetric Encryption for Cloud Storage Services

876

Improved security of a dynamic remote data possession checking protocol for cloud storage

877

Improved sedimentation field-flow fractionation separation channel for concentrated cellular elution

878

Improved Segmental Isotope Labeling Methods for the NMR Study of Multidomain or Large Proteins: Application to the RRMs of Npl3p and hnRNP L

879

Improved segmentation of meteorite micro-CT images using local histograms

880

Improved segmentation of X-ray tomography data from porous rocks using a dual filtering approach

881

Improved Seismic Design of Structural Frames by Optimization of Equivalent Lateral Load Pattern

882

Improved Seismic Performance of Chevron Brace Frames Using Multi-Pipe Yield Dampers

883

Improved seismic response of multi-span bridges retrofitted with compound restrainers

884

Improved selection and management of the auricular composite graft donor site

885

Improved selection criteria for ordering stat venous ultrasounds from the emergency department

886

Improved selection of LMW over HMW proteins from human plasma by mesoporous silica particles with external modification

887

Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning

888

Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning

889

Improved selective cholesterol adsorption by molecularly imprinted poly(methacrylic acid)/silica (PMAA–SiO2) hybrid material synthesized with different molar ratios

890

Improved Selectivity for Cu(II) of Methyl-Substituted Poly(pyrazolyl)borates, [HB(3-Mepz)3]- and [B(3-Mepz)4]-, through Steric Contact

891

Improved selectivity for the analysis of maternal serum and cord serum for polyfluoroalkyl chemicals

892

Improved selectivity for the binding of naphthyridine dimer to guanine–guanine mismatch Original Research Article

893

Improved selectivity in detection of polar basic drugs by liquid chromatography–electrospray ionization mass spectrometry: Illustration using an assay method for the determination of famotidine in human plasma

894

Improved selectivity in the toluene alkylation reaction through understanding and optimising the process variables Original Research Article

895

Improved selectivity of oxide semiconductor type gas sensor using compensating element

896

Improved selectivity towards NO2 of phthalocyanine-based chemosensors by means of original indigo/nanocarbons hybrid material

897

Improved selectivity, response time and recovery time by [0 1 0] highly preferred-orientation silicalite-1 layer coated on SnO2 thin film sensor for selective ethylene gas detection

898

Improved self-alignment scheme for SINS using augmented measurement

899

Improved self-calibrated spiral parallel imaging using JSENSE

900

Improved semi-analytic sensitivity analysis combined with a higher order approximation scheme in the framework of adjoint variable method

901

Improved semi-empirical method for determination of heat transfer coefficient in flow boiling in conventional and small diameter tubes

902

Improved sensitivities in MW dispatch for control of voltage

903

Improved sensitivity analysis by a coupled FE–EFG method

904

Improved Sensitivity and Characterization of High-Speed Ion Chromatography of Inorganic Anions

905

Improved sensitivity and gradient-enhanced multiplicity edited two-dimensional heteronuclear shift correlation technique

906

Improved sensitivity for transition metal ions by use of sulfide in the Belousov–Zhabotinskii oscillating reaction Original Research Article

907

Improved sensitivity in detection of chlormequat by liquid chromatography–mass spectrometry

908

Improved sensitivity of sedimentary phospholipid analysis resulting from a novel extract cleanup strategy

909

Improved Sensitization of Antigen-Presenting Cells with Transferrin-Bound Peptides: Advantages in Competition for Antigen Presentation

910

Improved Sensor Selection Technique by Integrating Sensor Fusion in Robot Position Estimation

911

Improved sentence retrieval using local context and sentence length

912

Improved separation and characterization of lipopolysaccharide related compounds by reverse phase ion pairing-HPLC/electrospray ionization-quadrupole-mass spectrometry (RPIP-HPLC/ESI-Q-MS)

913

Improved separation and detection of picolinic acid and quinolinic acid by capillary electrophoresis-mass spectrometry: Application to analysis of human cerebrospinal fluid

914

Improved separation and quantification of neutral and polar lipid classes by HPLC–ELSD using a monolithic silica phase: Application to exceptional marine lipids

915

Improved separation efficiency in nanofiltration by using a membrane stack Original Research Article

916

Improved separation efficiency of neurotransmitters on a native printed capillary electrophoresis microchip simply by manipulating electroosmotic flow

917

Improved separation efficiency of photogenerated carriers for Fe2O3/SrTiO3 heterojunction semiconductor

918

Improved separation methods for the recovery of 82Sr from irradiated targets

919

Improved separation of biologically active substances on some composite sorbents

920

Improved separation of furocoumarins of essential oils by supercritical fluid chromatography

921

Improved separation of metallothionein isoforms by the presence of cyclodextrin in capillary zone electrophoresis

922

Improved Separation of Neolithic Metapodials of Sheep (Ovis) and Goats (Capra) from Arene Candide Cave, Liguria, Italy

923

Improved separation of sucrose ester isomers using gradient high performance liquid chromatography with evaporative light scattering detection

924

Improved separation of the 209 polychlorinated biphenyl congeners using comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry

925

Improved sequential linear programming formulation for structural weight minimization Original Research Article

926

Improved sequential procedures for estimating the percentile of a normal distribution

927

Improved sequentially linear solution procedure

928

Improved serodiagnosis of hydatid cyst disease using gold nanoparticle labeled antigen B in naturally infected sheep.

929

Improved Serological Response to Human Diploid Cell Rabies Vaccine When Given Simultaneously with Antirabies Hyperimmune Globulin

930

Improved serpentine laminating micromixer with enhanced local advection

931

Improved shape hardening function for bounding surface model for cohesive soils

932

Improved shape memory composites combined with TiNi wire and shape memory epoxy

933

Improved shape stability of nanosilica-filled PBT fibrils in PS matrix: Effects of accelerated crystallization and enhanced viscoelasticity

934

Improved shell finite element for piezothermoelastic analysis of smart fiber reinforced composite structures

935

Improved shoot regeneration protocol for canola explants and pre-assessment of salinity tolerance in canola transgenic plants

936

Improved shooting technique for numerical computations of eigenvalues in Sturm–Liouville problems Original Research Article

937

Improved short peptide identification using HILIC–MS/MS: Retention time prediction model based on the impact of amino acid position in the peptide sequence

938

Improved short-circuit photocurrent densities in dye-sensitized solar cells based on ordered arrays of titania nanotubule electrodes

939

Improved shoulder contour following forequarter amputation with an osteomyocutaneous free flap from the amputated extremity: two cases

940

Improved Shuffled Frog Leaping Algorithm and its multi-phase model for multi-depot vehicle routing problem

941

IMPROVED SIGNAL PROCESSING FOR SPLIT HOPKINSON BAR TESTS ON (QUASI-) BRITTLE MATERIALS

942

Improved Signal-to-Noise Ratio Estimation for Speech Enhancement

943

Improved sign-based learning algorithm derived by the composite nonlinear Jacobi process

944

Improved silver ion-selective electrodes using novel 1,3-bis(2-benzothiazolyl)thioalkoxy-p-tert-butylcalix[4]arenes

945

Improved silver/zinc secondary cells for underwater applications

946

Improved simulation method for the calculation of the intrinsic viscosity of some dendrimer molecules

947

Improved simulation of feedbacks between atmosphere and sea ice over the Arctic Ocean in a coupled regional climate model

948

Improved Simulation of Flow Regime Transition in Sewers: Two-Component Pressure Approach

949

Improved Simulation of Flows with Free-Surface Waves by Optimizing the Angle Factor in the HRIC Interface-Sharpening Scheme

950

Improved simulation of HVDC converter transformers in electromagnetic transient programs

951

Improved simulation of the ICRF waves in the VASIMR plasma Original Research Article

952

Improved simulation of water vapour and clear-sky radiation using 24-hour forecasts from ERA40

953

Improved simultaneous determination method of β-carotene and retinol with saponification in human serum and rat liver

954

Improved Simultaneous Localization and Mapping Estimation using Crow Search Algorithm Based Particle Filter

955

Improved single neuron controller for multivariable stochastic systems with non-Gaussianities and unmodeled dynamics

956

Improved single pass core design for high temperature Super LWR

957

Improved single-drop microextraction for high sensitive analysis

958

Improved single-phase line-interactive UPS

959

Improved single-video-object rate control for MPEG-4

960

Improved singular boundary method for elasticity problems

961

Improved sinterability and conductivity enhancement of 10-mol% calcium-doped ceria using different fuel-aided combustion reactions and its structural characterisation

962

Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment

963

Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment

964

Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment

965

Improved size-tunable preparation of polymeric nanoparticles by microfluidic nanoprecipitation

966

Improved Skin Wound Healing Activity of Insulin Cream as Evidenced from the Morphological Evaluation in Guinea Pigs

967

Improved Skips for Faster Postings List Intersection

968

Improved slack-based context-dependent DEA – A study of international tourist hotels in Taiwan

969

Improved Slater approximation to SIC–OEP

970

Improved sliding mode control of a class of nonlinear systems: Application to quadruple tanks system

971

Improved Sliding Surface Search Method for Stability Analysis of Complex Slopes

972

Improved sliding wear-resistance of alumina with sub-micron grain size: A comparison with coarser grained material

973

Improved small-signal analysis for the phase-shifted PWM power converter

974

Improved smelting of ferrosilicon by means of SS-grade coal.

975

Improved Smoking Cessation in Smokers Given Ultrasound Photographs of Their Own Atherosclerotic Plaques

976

Improved smoothing spline regression by combining estimates of different smoothness

977

Improved smoothness and homogeneity of icosahedral grids using the spring dynamics method

978

Improved SNR in linear reordered 2D bSSFP imaging using variable flip angles

979

Improved SNR of MST RADAR Signals by Cosine Hyperbolic Window over Kaiser Window

980

Improved Sobolev inequalities and Muckenhoupt weights on stratified Lie groups

981

Improved Sobolev inequalities on groups of Iwasawa type in presence of symmetry

982

Improved Sobolev inequalities on the Heisenberg group Original Research Article

983

Improved Software Cost Estimation – A Robust and Interpretable Modelling Method and a Comprehensive Empirical Investigation

984

Improved software quality through improved development process descriptions

985

Improved soil hydraulic conductivity function based on specific liquid–vapour interfacial area around the soil particles

986

Improved soil moisture balance methodology for recharge estimation

987

Improved Soil Physical Properties, Yield and Water Productivity under Controlled Traffic, Raised-Bed Farming

988

Improved soil structure and citrus growth after inoculation with three arbuscular mycorrhizal fungi under drought stress

989

Improved solar efficiency by introducing graphene oxide in purple cabbage dye sensitized TiO2 based solar cell

990

Improved solarization of containerized medium for the control of Monosporascus collapse in melon

991

Improved solid fuels from co-pyrolysis of a high-sulphur content coal and different lignocellulosic wastes

992

Improved solidification influence modelling for Eulerian fuel–coolant interaction codes

993

Improved solid-phase extraction and HPLC measurement of torasemide and its important metabolites

994

Improved solid-phase extraction procedure for the isolation and in-sorbent pentafluorobenzyl alkylation of polyfunctional mercaptans: Optimized procedure and analytical applications

995

Improved solid-phase extraction/micellar procedure for the derivatization/preconcentration of benzaldehyde and methyl derivatives from water samples

996

Improved solid-phase peptide synthesis of ‘difficult peptides’ by altering the microenvironment of the developing sequence

997

Improved solid-phase synthesis and study of arylopeptoids with conformation-directing side chains

998

Improved solubilities of PAHs by multi-component Gemini surfactant systems with different spacer lengths

999

Improved solubility and stability of 7-hydroxy-4-methylcoumarin at different temperatures and pH values through complexation with sulfobutyl ether-β-cyclodextrin

1000

Improved solubility and stability of trialkylammonium selenocarboxylate in organic solvents for efficient amidation with azides

بازگشت