<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modeling nonindustrial private forest landowner behavior in face of woody bioenergy markets
2
Modeling non-isothermal austenite to ferrite transformation in low carbon steels
3
Modeling non-isothermal heat inactivation of microorganisms having biphasic isothermal survival curves
4
Modeling non-isothermal two-phase multicomponent flow in the cathode of PEM fuel cells
5
Modeling nonlinear behavior in a piezoelectric actuator
6
Modeling nonlinear dynamics in analog circuits via root localization
7
Modeling nonlinear elastic behavior of plasma sprayed ceramics and its evolution with sintering
8
Modeling nonlinear elastic solid with correlated lattice bond cell for dynamic fracture simulation
9
Modeling nonlinear optical properties of inorganic complexes. Counterion effects Original Research Article
10
Modeling non-linear oscillators: a new approach
11
Modeling non-linear survival curves to calculate thermal inactivation of Salmonella in poultry of different fat levels
12
Modeling nonlinearities and asymme tries in quarterly revenues of the US telecommunications industry
13
Modeling non-linearities in real effective exchange rates
14
Modeling non-Lorentzian two-photon absorption line shape in dipolar chromophores
15
Modeling non-premixed laminar co-flow flames using flamelet-generated manifolds
16
Modeling Nonspherical Particles Using Multisphere Discrete Elements
17
Modeling non-uniform frost growth on a fin-and-tube heat exchanger
18
Modeling Nonuniform Suspended Sediment Transport in Alluvial Rivers
19
Modeling Nonuniform Suspended Sediment Transport in Alluvial Rivers
20
Modeling nonuniform transmission lines for time domain simulation of electromagnetic transients
21
Modeling Novel Quinocofactors: An Overview
22
Modeling NOx emissions from coal-fired utility boilers using support vector regression with ant colony optimization
23
Modeling NOx emissions from coal-fired utility boilers using support vector regression with ant colony optimization
24
Modeling NOx release from a single coal particle I. Formation of NO from volatile nitrogen
25
Modeling NOx release from a single coal particle II. Formation of NO from char-nitrogen
26
Modeling Np and Pu transport with a surface complexation model and spatially variant sorption capacities: implications for reactive transport modeling and performance assessments of nuclear waste disposal sites
27
Modeling NPK release from spherically coated fertilizer granules
28
Modeling nuclear dynamics and weak interaction rates during the supernova collapse phase
29
Modeling nuclear dynamics and weak interaction rates during the supernova collapse phase
30
Modeling nucleation and droplet growth for ion-induced nucleation experiments in diffusion cloud chambers
31
Modeling nucleation and growth of bubbles during foaming of molten aluminum with high initial gas supersaturation
32
Modeling nucleotide evolution: A heterogeneous rate analysis
33
Modeling numerically the Rikitakeʹs attractors by parameter switching
34
Modeling nutrient availability of alfalfa hay harvested at three stages of maturity and in the afternoon and morning in dairy cows
35
Modeling nutrient loads to the northern Adriatic
36
Modeling nutrient pollution during a first flood event using HSPF software: Iskar River case study, Bulgaria
37
Modeling nutrient pollution during a first flood event using HSPF software: Iskar River case study, Bulgaria
38
Modeling nutrients profiles at the sediment–water interface. Calibration and validation from two climatically contrasted estuaries: Seine (France) and Somone (Senegal)
39
Modeling observation error and its effects in a random walk/extinction model
40
Modeling observed saturation overshoot with continuum additions to standard unsaturated theory
41
Modeling observer stress for typical real environments
42
Modeling occupancy in single person offices
43
Modeling Occurrence of Dengue Cases in Malaysia
44
Modeling Occurrence of Dengue Cases in Malaysia
45
MODELING OCCURRENCES OF OBJECTS IN RELATIONS
46
Modeling ocean deep convection
47
Modeling ocean primary production: Sensitivity to spectral resolution of attenuation and absorption of light
48
Modeling ocean-atmosphere carbon budgets during the Last Glacial Maximum-Heinrich 1 meltwater event-Bølling transition
49
Modeling of “gradual” solar energeticparticle events using a stochastic differential equation method Original Research Article
50
Modeling of 1,3-butadiene in urban and industrial areas
51
Modeling of 1,3-hexadiene, 2,4-hexadiene and 1,4-hexadiene-doped methane flames: Flame modeling, benzene and styrene formation
52
Modeling of 1–2 September 1859 super magnetic storm Original Research Article
53
Modeling of 31P-NMR spectra of magnetically oriented phospholipid liposomes: A new analytical solution
54
Modeling of 3C-SiC(1 0 0) using the BFS method for alloys
55
Modeling of 3D Basin Structures for Seismic Wave Simulations Based on Available Information on the Target Area: Case Study of the Osaka Basin, Japan
56
Modeling of 3-D non-gray gases radiation by coupling the finite volume method with weighted sum of gray gases model
57
Modeling of 3D temperature fields for oblique machining
58
Modeling of 3D transversely piezoelectric and elastic bimaterials using the boundary element method
59
MODELING OF 8-MODE TEST PROCEDURE FOR ZETOR FORTERRA 8641 TRACTOR
60
Modeling of a 1 MW cogenerative internal combustion engine for diagnostic scopes
61
Modeling of a 1000 MW power plant ultra super-critical boiler system using fuzzy-neural network methods
62
Modeling of a 5-cell direct methanol fuel cell using adaptive-network-based fuzzy inference systems
63
Modeling of a bacterial and fungal biofilter applied to toluene abatement: Kinetic parameters estimation and model validation
64
Modeling of a Batch Catalytic Reactive Distillation Process Using a Multi-Scale Approach of Pore Diffusion and a Non-Equilibrium Rate Based Model
65
Modeling of a bead mill process for dispersion of coagulated nano particles
66
Modeling of a bioethanol combustion engine under different operating conditions
67
Modeling of a biomass high temperature steam gasifier integrated with assisted solar energy and a micro gas turbine
68
Modeling of a biphasic membrane reactor catalyzed by lipase immobilized in a hydrophilic/hydrophobic composite membrane
69
Modeling of a catalytic autothermal methane reformer for fuel cell applications Original Research Article
70
Modeling of a catalytic membrane reactor for CO removal from hydrogen streams – A theoretical study
71
Modeling of a cationic glucose-sensitive membrane with consideration of oxygen limitation
72
Modeling of a charge coupled device based optical tomographic instrumentation system for particle sizing
73
Modeling of a circulating fluidized bed for ammoxidation of propane to acrylonitrile
74
Modeling of a coal-fired slagging combustor: Development of a slag submodel
75
Modeling of a combined ion transport and porous membrane reactor for oxy-combustion
76
Modeling of a compact plate-fin reformer for methanol steam reforming in fuel cell systems
77
Modeling of a conceptual self-sustained liquid fuel vaporization – combustion system with radiative output using inert porous media
78
Modeling of a confinement bypass accident with CONSEN, a fast-running code for safety analyses in fusion reactors
79
Modeling of a continuous fluidized bed dryer using artificial neural networks
80
Modeling of a deformable manikin neck for multibody dynamic simulation
81
Modeling of a domestic frost-free refrigerator
82
Modeling of a Dynamic Magneto-Fluid Seal in the Presence of a Pressure Drop
83
Modeling of a flat plate membrane-distillation system for liquid desiccant regeneration in air-conditioning applications
84
Modeling of a flat-plate solar reactor. Degradation of formic acid by the photo-Fenton reaction
85
Modeling of a front wall fired utility boiler for different operating conditions Original Research Article
86
Modeling of a gas catalytic chemical reaction, taking into account the diffusion in the adsorbed phase
87
Modeling of a gas–liquid reactor in batch conditions. Study of the intermediate regime when part of the reaction occurs within the film and part within the bulk
88
Modeling of a generalized newtonian flow through channels with permeable wall
89
Modeling of a glucose sensitive composite membrane for closed-loop insulin delivery
90
Modeling of a green certificate market
91
Modeling of a hazelnut dryer assisted heat pump by using artificial neural networks
92
Modeling of a hazelnut dryer assisted heat pump by using artificial neural networks
93
Modeling of a heat-coupled catalytic reactor with co-current oxidation and conversion flows
94
Modeling of a helicon plasma source
95
Modeling of a hemispherical inductively coupled plasma using neural network
96
Modeling of a Human Circadian Mutation Yields Insights into Clock Regulation by PER2
97
Modeling of a hydronic ceiling system and its environment as energetic auditing tool
98
Modeling of a linear PM Machine including magnetic saturation and end effects: maximum force-to-current ratio
99
Modeling of a locking mechanism between two rough surfaces under cyclic loading
100
Modeling of a locking mechanism between two rough surfaces under cyclic loading
101
Modeling of a manufacturing cell design problem with fuzzy multi-objective parametric programming
102
Modeling of a mechanical cooling system with variable cooling capacity by using artificial neural network
103
Modeling of a membrane-based absorption heat pump
104
Modeling of a membraneless single-chamber microbial fuel cell with molasses as an energy source
105
Modeling of a micro auto-electrolytic cell for hydrogen production
106
Modeling of a microbial growth experiment with bioclogging in a two-dimensional saturated porous media flow field
107
Modeling of a microfluidic electrochemical cell for CO2 utilization and fuel production
108
Modeling of a miniaturized mass spectrometer with field emission electron source
109
Modeling of a multilane-multiple intersection based on queue theory and standard approach techniques
110
Modeling of a Multiply Jointed Voussoir Beam in the Centrifuge
111
Modeling of a New Percutaneous Orthopedic Implant System to Control the Post-surgery Osseointegration Process
112
Modeling of a new recuperative thermoelectric cycle for a tumble dryer
113
MODELING OF A NEW STRUCTURE OF PRECISION AIR CONDITIONING SYSTEM USING SECONDARY CONDENSER FOR RH REGULATION
114
Modeling of a new ZVS bi-directional dc-dc converter
115
Modeling of a non-isothermal FCC riser
116
Modeling of a nonlinear thermochemical energy storage by adsorption on zeolites
117
Modeling of a novel fish passage-way using coupled spatially varied flow
118
Modeling of a Novel Hybrid Drivetrain Based on Hybridized Ball Continuously Variable Transmission
119
Modeling of a Novel Magneto-electro-elastic Energy Harvesting System Subjected to Applied Electric Voltage with Simultaneous Use as an Electrical Actuator System
120
Modeling of a novel multi-stage bubble column scrubber for flue gas desulfurization
121
Modeling of a novel spool compressor with multiple vapor refrigerant injection ports
122
Modeling of a novel Trombe wall with PV cells
123
Modeling of a passive distributed vibration control device using a superposition technique
124
Modeling of a passive DMFC operating with neat methanol
125
Modeling of a pilot-scale fixed-bed reactor for iron-based Fischer–Tropsch synthesis: Two-dimensional approach for optimal tube diameter
126
Modeling of a PIN diode RF switch for reconfigurable antenna application
127
Modeling of a planar FEL amplifier with a sheet relativistic electron beam
128
Modeling of a planar FEL amplifier with a sheet relativistic electron beam
129
Modeling of a Power Conversion System with RELAP5-3D/K and Associated Application to the Feedwater Blowdown Licensing Analysis for the ABWR Containment Design
130
Modeling of a pressure modulated desalination system using bond graph methodology
131
Modeling of a pressure sensor based on an array of wedge emitters
132
Modeling of a Probabilistic Re-Entrant Line Bounded by Limited Operation Utilization Time
133
Modeling of a proton exchange membrane fuel cell based on the hybrid particle swarm optimization with Levenberg–Marquardt neural network
134
Modeling of a p-type resistive gas sensor in the presence of a reducing gas
135
Modeling of a quantum cascade laser operating at 1 THz
136
Modeling of a radial flow hollow fiber module and estimation of model parameters for aqueous multi-component mixture using numerical techniques
137
Modeling of a radial flow hollow fiber module and estimation of model parameters using numerical techniques
138
Modeling of a rail suspension system to investigate vertical vibration and effective parameters on it
139
Modeling of a residential house coupled with a dual source heat pump using TRNSYS software
140
Modeling of a rotor speed transient response with radial rubbing
141
Modeling of a saturated switched reluctance motor using an operating point analysis and the unsaturated torque equation
142
Modeling of a Schottky Diode in CMOS Process with a Flexible “Open-Through” On-Chip De-embedding Method
143
Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings
144
Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena
145
Modeling of a single-phase photovoltaic inverter
146
Modeling of a SiO rSi 001/ structure including step and terrace 2 configurations
147
Modeling of a smoldering cigarette
148
Modeling of a solar and heat pump sludge drying system
149
Modeling of a solar powered absorption cycle for Abu Dhabi
150
Modeling of a solid oxide fuel cell power plant using an ensemble of neural networks based on a combination of the adaptive particle swarm optimization and Levenberg–Marquardt algorithms
151
Modeling of a space cooling system with underground storage
152
Modeling of a space flexible probe–cone docking system based on the Kane method
153
Modeling of a space heating and cooling system with seasonal energy storage
154
Modeling of a spiral-wound module and estimation of model parameters using numerical techniques Original Research Article
155
Modeling of a split type air conditioner with integrated water heater
156
Modeling of a station in CVS and an approach to analyze distributions of time intervals of vehicles departed from the station
157
Modeling of a substrate thermomechanical behavior during plasma spraying
158
Modeling of a synchronous reluctance machine accounting for space harmonics in view of torque ripple minimization Original Research Article
159
Modeling of a teamʹs decision-making process
160
Modeling of a tempered martensitic hot work tool steel behavior in the presence of thermo-viscoplastic coupling
161
Modeling of a thermal energy storage system coupled with combined heat and power generation for the heating requirements of a University Campus
162
Modeling of a thermomechanical process chain for sheet steels
163
Modeling of a thermomechanical process chain for sheet steels
164
Modeling of a three-compartment membrane electrodialysis in H2SO4–(NH4)2SO4–NH3·H2O system
165
Modeling of a Three-Phase Industrial Batch Reactor Using a Hybrid First-Principles Neural-Network Model
166
Modeling of a transition to diffusionless dendritic growth in rapid solidification of a binary alloy
167
Modeling of a transmission line protection relaying scheme using Petri nets
168
Modeling of a transmission network protection system using Petri nets
169
Modeling of a Transpiring Wall Reactor for the Supercritical Water Oxidation Using Simple Flow Patterns: Comparison to Experimental Results
170
Modeling of a Tröger’s tweezer and its complexation properties
171
Modeling of a two-phase CO2-filled vertical borehole for geothermal heat pump applications
172
Modeling of a two-stage draw process
173
Modeling of a two-stage magnetic refrigerator with wavy-structure gadolinium heat exchangers
174
Modeling of a two-step solar hydrogen production plant
175
Modeling of a Vanadium Redox Flow Battery for power system dynamic studies
176
Modeling of a violaxanthin–chlorophyll b chromophore pair in its LHCII environment using CAM-B3LYP
177
Modeling of Abrasive Wear Behaviour of Natural Fiber (Rice Husk Ceramic) Epoxy Composite Using Response Surface Methodology.
178
Modeling of Accumulated Energy Ratio (AER) for Estimating Liquefaction Potential using Artificial Neural Network (ANN) and Gene Expression Programming (GEP) (using Data from Tabriz)
179
Modeling of ACL impingement against the intercondylar notch
180
Modeling of acoustic wave propagation in time-domain using the discontinuous Galerkin method – A comparison with measurements
181
Modeling of activated carbon preparation from Spanish anthracite based on ANFIS structure
182
Modeling of activated sludge plants treatment efficiency with PLSR: a process analytical case study
183
Modeling of active holonic control systems for intelligent buildings
184
Modeling of active transport systems
185
Modeling of adaptive composites including debonding
186
Modeling of Adaptive Load Balancing with Hybrid F/CDMA and Sectorization Schemes in Mobile Communication Networks
187
Modeling of adatom vibrational populations and recombination rates in exoergic reactions
188
Modeling of adiabatic moving-bed reactor for dehydrogenation of isobutane to isobutene Original Research Article
189
Modeling of adsorbent based hydrogen storage systems
190
Modeling of adsorption and phase diagrams for stepped surfaces: Transfer matrix approach
191
Modeling of adsorption equilibria in supercritical fluids
192
Modeling of adsorption heat pumps with heat regeneration
193
Modeling of adsorption in hydrophobic interaction chromatography systems using a preferential interaction quadratic isotherm
194
Modeling of adsorption isotherms and competitive adsorption breakthroughs of Nicotine/Pyridine removal from aqueous solution by activated Montmorillonite
195
Modeling of adsorption isotherms and kinetics of a tannery dye onto an activated carbon prepared from an agricultural by-product
196
Modeling of adsorption isotherms of water vapor on Tunisian olive leaves using statistical mechanical formulation
197
Modeling of adsorption of toxic chromium on natural and surface modified lightweight expanded clay aggregate (LECA)
198
Modeling of adsorption storage of hydrogen on activated carbons
199
Modeling of advanced alkaline electrolyzers: a system simulation approach
200
Modeling of Advanced High Strength Steels with the realistic microstructure–strength relationships
201
Modeling of aerated stirred tanks with shear-thinning power law liquids
202
MODELING OF AERATED UPFLOW FIXED BED REACTORS FOR NITRIFICATION
203
MODELING OF AERATED UPFLOW FIXED BED REACTORS FOR NITRIFICATION
204
Modeling of aerobic biodegradation of feces using sawdust as a matrix
205
Modeling of aerosol deposition of titania thin films
206
Modeling of aerosol dynamics along a vertical flat plate
207
Modeling of aerosol dynamics in a laminar flow reactor: A multicomponent 2-D bimodal approach
208
Modeling of aerosol dynamics with MADE: Cloud contributions
209
Modeling of aerosol formation during biomass combustion for various furnace and boiler types
210
Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates
211
Modeling of agglomeration inside a droplet with nanosuspensions in an acoustic field
212
Modeling of aging process for supersaturated solution treated of Al–3wt%Mg alloy
213
Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation
214
Modeling of Air Pollutants’ Dispersion by Means of CALMET/CALPUFF (Case Study: District 7 in Tehran city)
215
Modeling of air region height in the casting process for preparing UO2 kernels
216
Modeling of Air Relative Humidity Effect on Adhesion Force in Manipulation of Nano-Particles and its Application in AFM
217
Modeling of air sparging of VOC-contaminated soil columns
218
Modeling of airborne particle exposure and effectiveness of engineering control strategies
219
Modeling of air-gap membrane distillation process: A theoretical and experimental study
220
Modeling of Alcator C-Mod divertor baffling experiments
221
Modeling of aldopyranosyl ring puckering with MM3 (92)
222
Modeling of alkaline scale formation in falling film horizontal-tube multiple-effect distillers Original Research Article
223
Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice
224
Modeling of ALOS and COSMO-SkyMed satellite data at Mt Etna: Implications on relation between seismic activation of the Pernicana fault system and volcanic unrest
225
Modeling of alpha mass-efficiency curve
226
Modeling of alpha mass-efficiency curve
227
Modeling of altered layer formation during reactive ion etching of GaAs
228
Modeling of Alternative Pathways of Electron Transport to Photosystem I in Isolated Thylakoids
229
Modeling of altitude effects on AC flashover of polluted high voltage insulators
230
Modeling of aluminum alloy profile extrusion process using finite volume method
231
Modeling of aluminum alloy sheets based on new anisotropic yield functions
232
Modeling of amino acid nanofiltration by irreversible thermodynamics
233
Modeling of ammonia combustion at low pressure
234
Modeling of ammonia dry deposition to a pocosin landscape downwind of a large poultry facility
235
Modeling of Ammonia Emission in the Petrochemical Industry
236
Modeling of ammonium dinitramide (ADN) monopropellant combustion with coupled condensed and gas phase kinetics
237
Modeling of ammonium lactate recovery and impurity removal from simulated fermentation broth by nanofiltration
238
Modeling of ammonothermal growth of gallium nitride single crystals
239
Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors
240
Modeling of an Airlift Reactor with Floating Solids for Wastewater Treatment
241
Modeling of an anode-supported Ni-YSZNi-ScSZScSZ LSM-ScSZ multiple layers SOFC cell: Part II. Simulations and discussion
242
Modeling of an anode-supported Ni–YSZNi–ScSZScSZLSM–ScSZ multiple layers SOFC cell: Part I. Experiments, model development and validation
243
Modeling of an APU system based on MCFC
244
Modeling of an axial flow, spherical packed-bed reactor for naphtha reforming process in the presence of the catalyst deactivation
245
Modeling of an Eco-Epidemiological system Involving Various Epidemic Diseases with Optimal Harvesting
246
Modeling of an EHD corona flow in nitrogen gas using an asymmetric capacitor for propulsion
247
Modeling of an ejector refrigerating system operating in dimensioning and off-dimensioning conditions with the working fluids R142b and R600a
248
Modeling of an EMP conducted environment
249
Modeling of an EMP simulator using a 3-D FDTD code
250
Modeling of an FAU-type zeolite membrane reactor for the catalytic dehydrogenation of cyclohexane
251
Modeling of an ice-on-coil thermal energy storage system
252
Modeling of an Impinging Oxygen Jet on Molten Bath Surface in 150 t EAF Original Research Article
253
Modeling of an industrial double-roll crusher of a urea granulation circuit
254
Modeling of an industrial fixed bed reactor based on lumped kinetic models for hydrogenation of pyrolysis gasoline
255
Modeling of an Industrial Full-Scale Plant for Biological Treatment of Textile Wastewaters: Application of Neural Networks
256
Modeling of an Industrial Riser in the Fluid Catalytic Cracking Unit
257
Modeling of an insurance system and its large deviations analysis
258
Modeling of an integrated active feedback preamplifier in a 0.25 (mu)m CMOS technology at cryogenic temperatures
259
Modeling of an integrated fermentation/membrane extraction process for the production of 2-phenylethanol and 2-phenylethylacetate
260
Modeling of an integrated solar system
261
Modeling of an integrated two-stage biomass gasifier and solid oxide fuel cell system
262
Modeling of an Intelligent e-Consent System in a Healthcare Domain
263
Modeling of an intermittent solar absorption refrigeration system operating with ammonia–lithium nitrate mixture
264
Modeling of an inventory system with multi variate demand under volume flexibility and learning
265
Modeling of an inverted pendulum based on fuzzy clustering techniques
266
Modeling of an island grid
267
Modeling of an obstacle detection sensor for horizontal directional drilling (HDD) operations
268
Modeling of an oxygen-staged membrane wall gasifier: effects of secondary oxygen
269
Modeling of an RO water desalination unit using neural networks
270
Modeling of an Upper-Convected-Maxwell Fluid Hammer Phenomenon in Pipe System
271
Modeling of Anaerobic Digestion of Complex Substrates
272
Modeling of analog blocks by using standard hardware description language
273
Modeling of analytical peaks: Peaks properties and basic peak functions Original Research Article
274
Modeling of anchor bolt pullout in concrete based on a heterogeneous assumption
275
MODELING OF ANECHOIC CHAMBER USING A BEAM-TRACING TECHNIQUE
276
Modeling of anisotropic inelasticity in pearlitic steel at large strains due to deformation induced substructure evolution
277
Modeling of anisotropic plastic behavior of ferritic stainless steel sheet
278
Modeling of anisotropic plastic behavior of ferritic stainless steel sheet
279
Modeling of anisotropic softening phenomena: Application to soft biological tissues
280
Modeling of anisotropic tensile and cyclic viscoplastic behavior of a nickel-base directionally solidified superalloy
281
Modeling of annual oscillations and 1/f-noise of daily river discharges
282
Modeling of anodic dissolution of U–Pu–Zr ternary alloy in the molten LiCl–KCl electrolyte Original Research Article
283
Modeling of anomalous thermodynamic properties using lattice dynamics and inelastic neutron scattering
284
Modeling of aqueous amino acid and polypeptide solutions with PC-SAFT
285
Modeling of Aqueous BTEX Adsorption in Column and Multistage Adsorbers
286
Modeling of Aqueous Electrolyte Solutions with Perturbed-Chain Statistical Associated Fluid Theory
287
Modeling of arsenic immobilization by zero valent iron
288
Modeling of Artemisia sieberi Besser Habitat Distribution Using Maximum Entropy Method in Desert Rangelands
289
Modeling of arterial stenosis and its applications to blood diseases
290
Modeling of ash deposition in large-scale combustion facilities burning pulverized coal
291
Modeling of a-Si/poly-Si and a-Si/poly-Si/poly-Si stacked solar cells
292
Modeling of asphaltene and other heavy organic depositions
293
Modeling of asphaltene deposition in oil reservoirs during primary oil recovery
294
MODELING OF ASPHALTENE DEPOSITION IN PIPELINES
295
Modeling of asphaltene precipitation from n-alkane diluted heavy oils and bitumens using the PC-SAFT equation of state
296
Modeling of asphaltene precipitation utilizing Association Equation of State
297
Modeling of assisted cold start processes with anode catalytic hydrogen–oxygen reaction in proton exchange membrane fuel cell
298
Modeling of asymmetric membrane formation by a combination of dry/wet phase inversion processes Original Research Article
299
Modeling of asymmetric membrane formation by dry-casting method
300
Modeling of asymmetric redeposition distribution between inner and outer regions of the W-shaped divertor in JT-60U
301
Modeling of atmosphere stratification in containments of nuclear power plants using lumped-parameter code
302
Modeling of atmospheric temperature fluctuations by translations of oscillatory random processes with application to spacecraft atmospheric re-entry
303
Modeling of atmospheric wind speed sequence using a lognormal continuous stochastic equation
304
Modeling of ATP-mediated signal transduction and wave propagation in astrocytic cellular networks
305
Modeling of Austenite Decomposition in Low Si-Mn TRIP Steel During Cooling Original Research Article
306
Modeling of austenite decomposition in plain carbon steels during hot rolling
307
Modeling of autoignition and NO sensitization for the oxidation of IC engine surrogate fuels
308
Modeling of automotive drum brakes for squeal and parameter sensitivity analysis
309
Modeling of automotive fuel cell operation in driving cycles
310
Modeling of avionics blueprint architecture based on GSPN and LP
311
Modeling of axial and shear stresses in multilayer sandwich beams with stiff core layers
312
Modeling of axial bed-to-wall heat transfer in a CFB combustor with abrupt riser exit geometry
313
Modeling of Axial Flux Permanent-Magnet Machines
314
Modeling of axial motion of small droplets deposited on smooth and rough fiber surfaces
315
Modeling of axially and transversely injected precursor droplets into a plasma environment
316
Modeling of axially moving wire with damping: Eigenfunctions, orthogonality and applications in slurry wiresaws
317
Modeling of axis-symmetric steam plasma flow in a non-transferred torch Original Research Article
318
Modeling of backpulse filter cleaning: the small particle filter cake fragments
319
Modeling of backwash cleaning methods for RO membranes Original Research Article
320
Modeling of baking of thin layer of cake using the lumped reaction engineering approach (L-REA) Original Research Article
321
Modeling of Banks Bankruptcy in Iran (Multivariate Statistical Analysis)
322
Modeling of baryte batch grinding in a vibratory disc mill
323
Modeling of batch and semi-batch membrane filtration processes
324
Modeling of Be diffusion in GaAs layers grown by MBE
325
Modeling of Beams on Reinforced Granular Beds
326
Modeling of Benzene Adsorption in the Gas Phase on Single-Walled Carbon Nanotubes for Reducing Air Pollution
327
Modeling of benzocaine analog interactions with the D4S6 segment of NaV4.1 voltage-gated sodium channels Original Research Article
328
Modeling of beryllium sputtering and re-deposition in fusion reactor plasma facing components
329
Modeling of bi-equilibrium states in dielectric elastomer
330
Modeling of bimetallic Pt-based electrocatalyst on extended-surface support for advanced hydrogen compression and separation
331
Modeling of binary droplet collisions for application to inter-impingement sprays
332
Modeling of biodiesel production in algae cultivation with anaerobic digestion (ACAD)
333
Modeling of biodynamic responses distributed at the fingers and the palm of the human hand–arm system
334
Modeling of biological doses and mechanical effects on bone transduction
335
Modeling of biomanipulation in shallow, eutrophic lakes: An application to Lake Bleiswijkse Zoom, the Netherlands
336
Modeling of biomanipulation in shallow, eutrophic lakes: An application to Lake Bleiswijkse Zoom, the Netherlands
337
Modeling of biomass production by Spirulina platensis as function of phosphate concentrations and pH regimes
338
Modeling of bipolar HVDC links in the harmonic domain
339
Modeling of Bipolar Junction Transistor in FDTD Simulation of Printed Circuit Board
340
Modeling of blade sharpness and compression cut of biomaterials
341
Modeling of blast process using indenting method
342
Modeling of bleaching wave regime of UV laser polymerization of acrylates without initiators
343
Modeling of Blood Flow in a Constricted Porous Vessel Under Magnetic Environment: An Analytical Approach
344
Modeling of body mass index by Newtonʹs second law
345
Modeling of boiling flow in microchannels for nucleation characteristics and performance optimization
346
Modeling of bombardment-induced diffusion and segregation during the self-sputtering of Ga+ ions at SiO2/Si interfaces
347
Modeling of bond between near-surface mounted CFRP laminate strips and concrete
348
Modeling of bonding between steel rebar and concrete at elevated temperatures
349
Modeling of bone conduction of sound in the human head using hp-finite elements: Code design and verification
350
Modeling of bone formation and resorption mediated by parathyroid hormone: response to estrogen/PTH therapy
351
Modeling of boron carbide oxidation in steam
352
Modeling of boron diffusion in polysilicon-on-silicon structures using a rapid thermal anneal step for ultra-shallow junction formation
353
Modeling of boron diffusion in polysilicon-on-silicon structures using a rapid thermal anneal step for ultra-shallow junction formation
354
Modeling of bounded stochastic processes
355
Modeling of brake pad-disc interface with emphasis to dynamics and deformation of structures
356
Modeling of branching and gelation in living copolymerization of monomer and divinyl cross-linker using dynamic lattice liquid model (DLL) and Flory–Stockmayer model
357
Modeling of Branching Structures of Plants
358
Modeling of breakthrough curves of single and quaternary mixtures of ethanol, glucose, glycerol and acetic acid adsorption onto a microporous hyper-cross-linked resin
359
Modeling of brine outfall at the planning stage of desalination plants Original Research Article
360
Modeling of bromate formation by ozonation of surface waters in drinking water treatment
361
Modeling of Bubble Column Reactors: Progress and Limitations
362
Modeling of bubble plume design and oxygen transfer for reservoir restoration
363
Modeling of bubble size distribution in isothermal gas–liquid flows: Numerical assessment of population balance approaches
364
Modeling of bubble surface area flux in an industrial rougher column using artificial neural network and statistical techniques
365
Modeling of bubble-layer thickness for formulation of one-dimensional interfacial area transport equation in subcooled boiling two-phase flow
366
Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces
367
Modeling of C/EBPα Mutant Acute Myeloid Leukemia Reveals a Common Expression Signature of Committed Myeloid Leukemia-Initiating Cells
368
Modeling of cable-moored floating breakwaters connected with hinges
369
Modeling of CaCO3 decomposition under CO2/H2O atmosphere in calcium looping processes
370
Modeling of Cadmium Removal on Lignite (Thar Coal) from Aqueous System
371
Modeling of cadmium salts rejection through a nanofiltration membrane: relationships between solute concentration and transport parameters
372
Modeling of cadmium(II) adsorption on kaolinite-based clays in the absence and presence of humic acid
373
Modeling of cancer virotherapy with recombinant measles viruses
374
Modeling of Capacitance and Sensitivity of a MEMS Pressure Sensor with Clamped Square Diaphragm
375
Modeling of Capacity Reservation and Supplier Selection Based on Option Contract
376
Modeling of capillary flow in shaped polymer fiber bundles
377
MODELING OF CARBON BLACK FILLED NATURAL RUBBER VULCANTZATES BY THE STANDARD TRIBOELASTTC SOLID
378
MODELING OF CARBON BLACK FILLED NATURAL RUBBER VULCANTZATES BY THE STANDARD TRIBOELASTTC SOLID
379
Modeling of carbon cycling and biogeochemical changes during injection and recovery of reclaimed water at Bolivar, South Australia
380
Modeling of carbon monoxide dispersion around the urban tunnel portals
381
Modeling of carbon nanotube clamping in tensile tests
382
Modeling of carbon sequestration in coal-beds: A variable saturated simulation
383
Modeling of carbon transport in the divertor and SOL of DIII-D during high performance plasma operation
384
Modeling of carbonate oil reservoirs in imbibition displacement with considering asphaltene deposition
385
Modeling of cardiac function of patients with acute myocardial infarction based on Type‑D personality: Mediating role of negative emotions
386
Modeling of Carrier-based Aircraft Ski Jump Take-off Based on Tensor
387
Modeling of cascade and sub-cascade formation at high PKA energies in irradiated fusion structural materials
388
Modeling of cascade damage interactions by Monte-Carlo method
389
Modeling of catalyst deactivation Original Research Article
390
Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes
391
Modeling of catalyst layer microstructural refinement and catalyst utilization in a PEM fuel cell
392
Modeling of catalytic coke formation in thermal cracking reactors
393
Modeling of catalytic coke formation in thermal cracking reactors
394
Modeling of catalytic gasification kinetics of coal char and carbon
395
Modeling of catalytic monolith reactor for reforming of hexadecane with exhaust gas
396
Modeling of catalytic reactor for oxidative coupling of methane using La2O3/CaO catalyst
397
Modeling of Catecholaminergic Polymorphic Ventricular Tachycardia With Patient-Specific Human-Induced Pluripotent Stem Cells
398
Modeling of cation diffusion in oxygen ion conductors using molecular dynamics
399
Modeling of Cd and Pb speciation in soil solutions by WinHumicV and NICA-Donnan model
400
Modeling of cell sorting and rare cell capture with microfabricated biodevices
401
Modeling of Cell/Dendrite Transition During Directional Solidification of Ti-Al Alloy Using Cellular Automaton Method Original Research Article
402
Modeling of central domestic water heater for buildings
403
Modeling of ceramic particles filled polymer–matrix nanocomposites
404
Modeling of CH4 combustion with NiO/NiAl2O4 in a 10 kWth CLC pilot plant
405
Modeling of Chain Conformations and Spatial Configurations
406
Modeling of chaotic motion of gyrostats in resistant environment on the base of dynamical systems with strange attractors
407
Modeling of characteristics of ionizing radiation detector based on AlGaAs–GaAs heterostructure
408
Modeling of characteristics of ionizing radiation detector based on AlGaAs–GaAs heterostructure
409
Modeling of charge neutralization by ionizer
410
Modeling of charge transfer processes to understand photophysical signatures: The case of Rhodamine 110
411
Modeling of chemical mechanical polishing process using FEM ، abductive network
412
Modeling of chemical reactions in afterburning for the reduction of N2O
413
Modeling of chemical reactor dynamics by nonlinear principal components
414
Modeling of chemical vapor infiltration process for fabrication of carbon–carbon composites by finite difference methods Original Research Article
415
Modeling of chloride diffusion in concrete containing low-calcium fly ash
416
Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions
417
Modeling of chloride diffusion in hetero-structured concretes by finite element method
418
Modeling of chloride diffusivity coupled with non-linear binding capacity in sound and cracked concrete
419
Modeling of chloride ion ingress in coastal concrete
420
Modeling of Chloride Ion Separation by Nanofiltration Using Machine Learning Techniques
421
Modeling of chloride transport coupled with enhanced moisture conductivity in concrete exposed to marine environment
422
Modeling of chlorine effect on floc forming and filamentous micro-organisms of activated sludges
423
Modeling of chromatographic separation process with Wiener-MLP representation
424
Modeling of Chromium Combustion in Incineration: Thermochemistry of Cr-C-H-Cl Combustion in Air and Selection of Key Reactions
425
Modeling of clarified tropical fruit juice deacidification by electrodialysis
426
Modeling of Class I Settling Tanks
427
Modeling of Class I Settling Tanks
428
Modeling of Climate Change Effects on Groundwater Resources: The Application of Dynamic Systems Approach
429
Modeling of Clostridium perfringens vegetative cell inactivation in beef-in-sauce products: A meta-analysis using mixed linear models
430
Modeling of cluster structure-dependent drag with Eulerian approach for circulating fluidized beds
431
Modeling of CO and NOx produced by vehicles in Mashhad, 2012
432
Modeling of CO dispersion from the stack of an Iranian cement Plant
433
Modeling of CO2 capture by three typical amine solutions in hollow fiber membrane contactors
434
Modeling of CO2 post-combustion capture using membrane contactors, comparison between one- and two-dimensional approaches
435
Modeling of CO2 release and the carbonate system in multiple-effect distillers Original Research Article
436
Modeling of CO2 solubility and carbamate concentration in DEA, MDEA and their mixtures using the Deshmukh–Mather model
437
Modeling of CO2 sorption on coal
438
Modeling of CO2-selective water gas shift membrane reactor for fuel cell
439
Modeling of coal breakage in a double-roll crusher considering the reagglomeration phenomena
440
Modeling of coal char gasification in coexistence of CO2 and H2O considering sharing of active sites
441
Modeling of coal combustion and NOx formation in a W-shaped boiler furnace
442
Modeling of coal combustion in a 25-MW FBC power plant
443
Modeling of coal gasification in an internally circulating fluidized bed reactor with draught tube
444
Modeling of Coalescence of Dispersed Surface Cracks. Part 1. Probabilistic Model for Crack Coalescence
445
Modeling of coalescence of dispersed surface cracks. Part 2. Simulation model for multiple fracture
446
Modeling of coaxial powder flow for the laser direct deposition process
447
Modeling of Collision Avoidance Protocols in Single-Channel Multihop Wireless Networks
448
Modeling of colloidal fouling in forward osmosis membrane: Effects of reverse draw solution permeation Original Research Article
449
Modeling of color values for nondestructive evaluation of maturity of mango Original Research Article
450
Modeling of combat operations
451
Modeling of combined effects of citral, linalool and β-pinene used against Saccharomyces cerevisiae in citrus-based beverages subjected to a mild heat treatment
452
Modeling of combined electroosmotic and capillary flow in microchannels Original Research Article
453
MODELING OF COMBINED NATURAL/THERMOCAPILLARY CONVECTION FLOWS IN GERMANIUM MELT AT HIGH TEMPERATURES
454
Modeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine
455
Modeling of combustion and ignition of solid-propellant ingredients
456
Modeling of compaction and overpressuring in sedimentary basins
457
Modeling of complex dynamical behaviours using a state representation technique based on a vector ARMA approach
458
Modeling of complex hydraulic fractures in naturally fractured formation
459
Modeling of complex premixed burner systems by using flamelet-generated manifolds
460
Modeling of complex protein structures
461
Modeling of compocasting process and fabrication of AZ91D magnesium alloy matrix composites
462
Modeling of composite coatings in plasma spraying
463
Modeling of composite fiber production with silica nanoparticles dispersed in polyethyleneoxide
464
Modeling of composite fibrous porous diffusion media
465
Modeling of composite fracture using cohesive zone and bridging models
466
Modeling of composite/concrete interface of RC beams strengthened with composite laminates
467
Modeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
468
Modeling of compression-induced splitting failure in heterogeneous brittle porous solids
469
Modeling of compressive failure in fiber reinforced composites
470
MODELING OF COMPRESSIVE STRENGTH OF METAKAOLIN BASED GEOPOLYMERS BY THE USE OF ARTIFICIAL NEURAL NETWORK
471
Modeling of Computerized Physician Order Entry with Decision Support System for Diabetic Patients
472
Modeling of concentrated aqueous solutions: Efficient implementation of Pitzer equations in geochemical and reactive transport models
473
Modeling of concentration polarization layer evolution and breakthrough concentrations in dead-end hyperfiltration
474
Modeling of concrete behavior under high strain rates with inertially retarded damage
475
MODELING OF CONCRETE CRACKING INDUCED BY STEEL EXPANSION
476
Modeling of concrete cracking—A hybrid technique of using displacement discontinuity element method and direct boundary element method
477
Modeling of condensation heat transfer for a PRHRS heat exchanger in a SMART-P plant Original Research Article
478
Modeling of condensation heat transfer of pure refrigerants in micro-fin tubes
479
Modeling of condensation heat transfer of refrigerant mixture in micro-fin tubes
480
Modeling of condensation in horizontal tubes Original Research Article
481
Modeling of Condensed Phase Combustion-Decomposition Reaction with Gas Generation
482
Modeling of Conducted Common Mode Perturbations in Variable-Speed Drive Systems
483
Modeling of conductive particle behavior in insulating fluids affected by DC electric fields
484
Modeling of conjugated heat transfer in a thick walled enclosure filled with nanofluid
485
Modeling of Conjunctive Two-Dimensional Surface-Three-Dimensional Subsurface Flows
486
Modeling of Conjunctive Two-Dimensional Surface-Three-Dimensional Subsurface Flows
487
Modeling of consciousness
488
Modeling of constituent redistribution in U–Pu–Zr metallic fuel
489
Modeling of constitutive relationship of Ti–25V–15Cr–0.2Si alloy during hot deformation process by fuzzy-neural network
490
Modeling of constitutive relationships and microstructural variables of Ti–6.62Al–5.14Sn–1.82Zr alloy during high temperature deformation
491
Modeling of Construction Cost of Villas in Oman
492
Modeling of Construction Noise for Environmental Impact Assessment
493
Modeling of contact tracing in social networks
494
Modeling of containment structures on high performance computers Original Research Article
495
Modeling of contaminant transport in soils considering the effects of micro- and macro-heterogeneity
496
Modeling of continuous drive friction welding of mild steel
497
Modeling of continuous dynamic recrystallization in commercial-purity aluminum
498
Modeling of continuous thermal processing of a non-Newtonian liquid food under diffusive laminar flow in a tubular system
499
Modeling of continuous time homogeneous Markov system with fixed size as elastic solid: the two-dimensional case
500
Modeling of continuously, directly analyzed biphasic reaction courses of ribulose 1,5-bisphosphate carboxylase/oxygenase
501
Modeling of controlled particle deposition onto electronically conducting surfaces
502
Modeling of convection heat transfer of supercritical carbon dioxide in a vertical tube at low Reynolds numbers using artificial neural network
503
Modeling of convection-dominated thermoporomechanics problems using incomplete interior penalty Galerkin method
504
Modeling of convective drying kinetic of Erythroxylu mminutifolium Griseb leaves
505
Modeling of convective heat transfer of a nanofluid in the developing region of tube flow with computational fluid dynamics
506
Modeling of cooking-emitted particle dispersion and deposition in a residential flat: A real room application
507
Modeling of copper fixed-bed biosorption from wastewater by Posidonia oceanica
508
Modeling of core flow in a gas–solids riser
509
Modeling of corium dispersion in DCH accidents Original Research Article
510
Modeling of corona under positive lightning surges
511
Modeling of Corroded FRP-Wrapped Reinforced Concrete Columns in Axial Compression
512
Modeling of corrosion fatigue in metals in an aggressive environment
513
Modeling of CorrosionFatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique
514
Modeling of corrosion-induced concrete cover cracking: A critical analysis
515
Modeling of corrugated laminates
516
Modeling of corrugated plate photocatalytic reactors and experimental validation
517
Modeling of cotunneling in quantum dot systems
518
Modeling of Coulomb Collisions in a Kinetic Description of the Electron Cyclotron Resonance Plasma Heating
519
Modeling of Coulomb interaction in parabolic quantum wires
520
Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore
521
Modeling of countercurrent shrinking-bed reactor in dilute-acid total-hydrolysis of lignocellulosic biomass
522
Modeling of coupled edge stochastic and core resonant magnetic field effects in diverted tokamaks
523
Modeling of coupled mass transport and chemical equilibrium in cement-solidified soil contaminated with heavy-metal ions
524
Modeling of coupled momentum, heat and solute transport during DNA hybridization in a microchannel in the presence of electro-osmotic effects and axial pressure gradients
525
Modeling of Coupled Shear Walls and Its Experimental Verification
526
Modeling of coupled spectral radiation, thermal and carrier transport in a silicon photovoltaic cell
527
Modeling of coupled structural systems by an energy spectral element method
528
Modeling of crack growth in ductile solids: a three-dimensional analysis
529
Modeling of crack growth in round bars and plane strain specimens
530
Modeling of crack growth through particulate clusters in brittle matrix by symmetric-Galerkin boundary element method
531
Modeling of Crack Initiation, Propagation and Coalescence in Uniaxial Compression
532
Modeling of crack propagation via an automatic adaptive mesh refinement based on modified superconvergent patch recovery technique
533
Modeling of crack tip high inertia zone in dynamic brittle fracture
534
Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique
535
Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique
536
Modeling of cracks in 3D piezoelectric finite media by weakly singular SGBEM
537
Modeling of Creep Behavior for Graphene Filled Vinyl Ester Nano-Composites
538
Modeling of creep behavior of Zircaloy-4 by considering metallurgical effect
539
Modeling of critical grain size for shifting plasticity enhancement to decrease by refining grain size
540
Modeling of critical lines and regions for binary and ternary mixtures using non-cubic and cubic equations of state
541
Modeling of critical phenomena for liquid/vapor–gas exothermic reaction on a single catalyst pellet
542
Modeling of crop loss caused by Puccinia striiformis f. sp. tritici in three common wheat cultivars in southern Iran
543
Modeling of cross flow ultrafiltration of stevia extract in a rectangular cell Original Research Article
544
Modeling of crossflow membrane separation processes under laminar flow conditions in tubular membrane Original Research Article
545
Modeling of cross-flow osmotic pressure controlled membrane separation processes under turbulent flow conditions
546
Modeling of cross-regulation in converters containing coupled inductors
547
Modeling of crude oil fouling in preheat exchangers of refinery distillation units
548
Modeling of cryogenic frictional behaviour of titanium alloys using Response Surface Methodology approach
549
Modeling of Cryopreservation of Engineered Tissues with One-Dimensional Geometry
550
Modeling of crystal size distributions (CSDs) in sills
551
Modeling of Cs+ diffusion and retention in the DI-A2 experiment (Mont Terri). Uncertainties in sorption and diffusion parameters
552
Modeling of Cu oxidation in an adiabatic fixed-bed reactor with N2 recycling
553
Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects
554
Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects
555
Modeling of current and future energy intensity and greenhouse gas emissions of the Lebanese industrial sector: assessment of mitigation options
556
Modeling of current and future energyintensity and greenhouse gas emissions ofthe Lebanese industrial sector: assessmentof mitigation options
557
Modeling of current–voltage and capacitance–voltage characteristics of pentacene and sol–gel derived SiO2 gate dielectric layer based on thin-film transistor
558
Modeling of current–voltage and capacitance–voltage characteristics of pentacene and sol–gel derived SiO2 gate dielectric layer based on thin-film transistor
559
Modeling of cutting forces as function of cutting parameters for face milling of satellite 6 using an artificial neural network
560
Modeling of CW laser diode irradiation of amorphous silicon films
561
Modeling of cyclic mobility in saturated cohesionless soils
562
Modeling of cyclohexene hydrogenation and dehydrogenation reactions in a continuous-flow microreactor
563
Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)
564
Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)
565
Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)
566
Modeling of daily pan evaporation in sub tropical climates using ANN, LS-SVR, Fuzzy Logic, and ANFIS
567
Modeling of dam break wave propagation in a partially ice-covered channel
568
Modeling of damage accumulation for Duffing-type systems under severe random excitations
569
MODELING OF DAMAGE EFFECT ON HEAT TRANSFER IN TIME-DEPENDENT NONHOMOGENEOUS SOLIDS
570
Modeling of damage evolution in soft-wood perpendicular to grain by means of a discrete element approach
571
Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites
572
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
573
Modeling of damage sensing in fiber composites using carbon nanotube networks
574
Modeling of dark characteristics of mercury cadmium telluride n+–p junctions
575
Modeling of dark current in mid-infrared quantum-well infrared photodetectors
576
Modeling of DBT biodegradation behaviors by resting cells of Gordonia sp. WQ-01 and its mutant in oil-water dispersions
577
Modeling of DC conductivity for ethylene vinyl acetate (EVA)/polyaniline conductive composites prepared through insitu polymerization of aniline in EVA matrix
578
Modeling of DC corona discharge along an electrically conductive flat plate with gas flow
579
Modeling of debonding failure for RC beams strengthened in shear with NSM FRP reinforcement
580
Modeling of decadal scale phosphorus retention in lake sediment under varying redox conditions
581
Modeling of decadal scale phosphorus retention in lake sediment under varying redox conditions
582
Modeling of decagonal quasicrystal lattice
583
Modeling of decentralized linear observer and tracker for a class of unknown interconnected large-scale sampled-data nonlinear systems with closed-loop decoupling property
584
Modeling of decision making in membership services as public goods problems
585
Modeling of deep traps in diamond detectors by means of β particles-induced conductivity measurements
586
Modeling of deep traps in diamond detectors by means of β particles-induced conductivity measurements
587
Modeling of deep-water renewal through cold convective plumes
588
MODELING OF DEFORMATION AND FRACTURE PROCESSES ON THE MESOLEVEL
589
MODELING OF DEFORMATION AND FRACTURE PROCESSES ON THE MESOLEVEL
590
Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression
591
Modeling of deformation behavior and texture evolution in magnesium alloy using the intermediate ϕ-model
592
Modeling of deformation behavior of SPD nanostructured CP titanium
593
Modeling of deformation induced anisotropy in free-end torsion
594
Modeling of delamination using a discretized cohesive zone and damage formulation
595
Modeling of dendritic solidification for optimizing casting and microstructure parameters
596
Modeling of dense gas–solid reactive mixtures applied to biomass pyrolysis in a fluidized bed
597
Modeling of density evolution of PLA under ultra-high pressure/temperature histories
598
Modeling of deoxy- and dideoxyaldohexopyranosyl ring puckering with MM3(92) Original Research Article
599
Modeling of Deposit Formation from "Waxy" Mixtures via Moving Boundary Formulation: Radial Heat Transfer under Static and Laminar Flow Conditions
600
Modeling of depuration of paralytic shellfish toxins in Chlamys nobilis and Perna viridis
601
Modeling of design iterations through simulation
602
Modeling of diamond liberation and damage for Debswana kimberlitic ores
603
Modeling of dielectric elastomers: Design of actuators and energy harvesting devices
604
MODELING OF DIELECTRIC MIXTURES CONTAINING CONDUCTING INCLUSIONS WITH STATISTICALLY DISTRIBUTED ASPECT RATIO
605
Modeling of Dielectric Relaxation for Lossy Materials at Microwave Frequencies using Polynomial Approaches
606
Modeling of dielectrophoretic force for moving dielectrophoresis electrodes
607
Modeling of Diffusion and Concurrent Metabolism in Cutaneous Tissue
608
Modeling of diffusion and reaction in monolithic catalysts for the methanol-to-propylene process
609
Modeling of diffusion behavior of humic acid and Nd in the presence of humic acid in compacted bentonite
610
Modeling of Diffusion Coefficients for Binary Gas at P=101.325 kPa using Particle Swarm Optimization Algorithm
611
Modeling of diffusion filtration combustion radiative burner
612
Modeling of diffusion in the presence of damage in polymer matrix composites
613
Modeling of diffusional phase transformation in multi-component systems with stoichiometric phases Original Research Article
614
Modeling of diffusive mass transport in micropores in cement based materials
615
Modeling of diffusivities in supercritical carbon dioxide using a linear solvation energy relationship
616
Modeling of diffusivity of tritium interacting with F centers in Li2O
617
Modeling of dimmable High Power LED illumination distribution using ANFIS on the isolated area
618
Modeling of dioctahedral 2:1 phyllosilicates by means of transferable empirical potentials
619
Modeling of diode configuration glow discharge impedance connected to pulse power supply
620
Modeling of direct beam extraction for a high-charge-state fusion driver
621
Modeling of direct beam extraction for a high-charge-state fusion driver
622
Modeling of Direct Contact Condensation in the Water-Saturated Zone of the Soil Exposed to Steam Injection
623
Modeling of direct contact membrane distillation process: Flux prediction of sodium sulfate and sodium chloride solutions Original Research Article
624
Modeling of directional solidification on an atomic scale
625
Modeling of direction-dependent Processes using Wiener models and neural networks with nonlinear output error structure
626
Modeling of discharge Coefficient of nonlinear weirs with QNET and SVM methods
627
Modeling of discontinuous dynamic recrystallization of a near-α titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method
628
Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging
629
Modeling of dislocation patterns of small- and high-angle grain boundaries in aluminum
630
Modeling of dislocation–grain boundary interactions in FCC metals
631
Modeling of disorder and X-ray diffraction in coal-based graphitic carbons Original Research Article
632
Modeling of dispersed-drug release from two-dimensional matrix tablets
633
Modeling of dispersion in a polymeric chromatographic monolith
634
Modeling of dispersion near roadways based on the vehicle-induced turbulence concept
635
Modeling of dissociation–recombination in nozzles using strongly non-equilibrium vibrational distributions Original Research Article
636
Modeling of dissolution-diffusion controlled drug release from planar polymeric systems with finite dissolution rate and arbitrary drug loading
637
Modeling of dissolved oxygen levels in the bottom waters of the Lower St. Lawrence Estuary: Coupling of benthic and pelagic processes
638
Modeling of distortion compensation ineffectivity in filters for nonactive power
639
Modeling of DNA fragmentation induced in human fibroblasts by 56Fe ions Original Research Article
640
Modeling of domain switching in ferroelectric ceramics: An example
641
Modeling of double action extrusion—A novel extrusion process for friction characterization at the billet–die bearing interface
642
Modeling of double-diffusive turbulent natural convection in porous media
643
Modeling of Dowel Jointed Rigid Airfield Pavement under Thermal Gradients and Dynamic Loads
644
Modeling of DR CALUX® bioassay response to screen PCDDs, PCDFs, and dioxin-like PCBs in farm milk from dairy herds
645
Modeling of drilling assisted by cryogenic cooling for higher efficiency
646
Modeling of droplet collision-induced breakup process
647
Modeling of droplet entrainment in co-current annular two-phase flow: A new approach
648
Modeling of droplet entrainment phenomena at a quench front
649
Modeling of droplet-gas interactions in spray atomization of Ta-2.5W alloy
650
Modeling of droplet-gas interactions in spray atomization of Ta-2.5W alloy
651
Modeling of drug delivery from erodible and non-erodible laminated planar devices into a finite external medium
652
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
653
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
654
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)
655
Modeling of drug release from microemulsions: a peculiar case
656
Modeling of Drying Behaviors of Mushroom in a Solar Assisted Heat Pump Dryer by Using Artificial Neural Network
657
Modeling of Ductile Crack Growth in Reactor Pressure-Vessel Steels and Determination of JR Curves
658
Modeling of ductile crack propagation in expanded thin-walled 6063-T5 aluminum tubes
659
Modeling of ductile fracture using the dynamic punch test
660
Modeling of ductile fracture using the dynamic punch test
661
Modeling of ductile fracture using the dynamic punch test
662
Modeling of ductile fracture: Application of the mechanism-based concepts
663
Modeling of ductile fracture: Significance of void coalescence
664
Modeling of Dynamic Behavior and Estimation of Damage Incurred by Self-Centering Rocking Walls
665
Modeling of dynamic cutting forces and cutting characteristics based on the analyzed results of average forcefeed rate relationship in milling process
666
Modeling of dynamic microstructure evolution of EN AW-6082 alloy during hot forward extrusion
667
Modeling of dynamic operating behaviors in a liquid-feed direct methanol fuel cell
668
Modeling of dynamic response of SOL-divertor plasmas to an ELM crash
669
Modeling of dynamic systems : By Lennart Ljung and Torkel Glad. Prentice-Hall, Englewood Cliffs, NJ (1994). ISBN 0-13-597097-0
670
Modeling of dynamical processes in laser ablation
671
Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 1. Isothermal flows
672
Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion
673
Modeling of early age behavior of blast furnace slag concrete based on micro-physical properties
674
Modeling of Early-Age Creep of Shotcrete. I: Model and Model Parameters
675
Modeling of Early-Age Creep of Shotcrete. II: Application to Tunneling
676
Modeling of eating pathology and social reinforcement of the thin-ideal predict onset of bulimic symptoms
677
Modeling of eddy characteristic time in LES for calculating turbulent diffusion flame
678
Modeling of eddy current effects in an opposite-field septum
679
Modeling of eddy current effects in an opposite-field septum
680
Modeling of eddy current probe response for steam generator tubes
681
Modeling of eddy current probe response for steam generator tubes
682
Modeling of eddy current probe response for steam generator tubes Original Research Article
683
Modeling of effect of polarization on UV sky radiance during twilight Original Research Article
684
Modeling of effective elastic properties for polymer based carbon nanotube composites
685
Modeling of effective material properties of pyrolytic carbon with different texture degrees by homogenization method
686
Modeling of effective thermal conductivity and viscosity of carbon structured nanofluid
687
Modeling of efficient charge transfer materials of 4,6-di(thiophen-2-yl)pyrimidine derivatives: Quantum chemical investigations
688
Modeling of elastic and inelastic electron backscattering from surfaces
689
Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings
690
Modeling of elastic modulus evolution of cirrhotic human liver
691
Modeling of elastic thermal stresses in two materials joined by a graded layer
692
Modeling of Elastoplastic Crack Propagation Using Finite Element Method with Adaptive Mesh
693
Modeling of elastoplastic damage behavior of a claystone
694
Modeling of electrical and optical characteristics of near room-temperature CdS/ZnSe based NIR photodetectors
695
Modeling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II
696
Modeling of electrical properties of grain boundaries in n-conducting barium titanate ceramics as a function of temperature and dc-bias
697
Modeling of electric-field driven transport processes in microdevices for immunoassay
698
Modeling of electricity consumption in the Asian gaming and tourism center—Macao SAR, Peopleʹs Republic of China
699
Modeling of electrochemical intercalation of lithium into a LiMn2O4 electrode using Green function
700
Modeling of electrocrystallization for pulse current electroforming of nickel
701
Modeling of electrodialytic and dialytic removal of Cr, Cu and As from CCA-treated wood chips Original Research Article
702
Modeling of electrokinetic transport in silica nanofluidic channels Original Research Article
703
Modeling of electromagnetic absorption/scattering problems on curvilinear geometries using hp finite/infinite element method
704
Modeling of electromagnetic absorption/scattering problems using hp-adaptive finite elements Original Research Article
705
Modeling of electromagnetic fields in rectangular waveguides by coupled finite–infinite elements Original Research Article
706
Modeling of electromagnetic interference induced by electrostatic discharge (ESD) inside resonant structures
707
Modeling of electromagnetic separation of inclusions from molten metals
708
Modeling of electromagnetic separation of inclusions from molten metals
709
Modeling of electromagnetically coupled substrate noise in FLASH A/D converters
710
Modeling of electron cyclotron current drive in a tokamak with internal transport barrier
711
Modeling of Electron Heating and the Spatiotemporal Evolution of Emission in a Current-Sheet Plasma
712
Modeling of electron injection and transport in conjugated polymers
713
Modeling of electron mobility degradation by remote Coulomb scattering in ultrathin oxide MOSFETs
714
Modeling of electron temperature and DC bias voltage in an inductively-coupled Cl2/Ar plasma using neural network
715
Modeling of Electron Transfer through DNA Molecules
716
Modeling of electron-vibrational 4fn–4fn − 15d spectra in LiYF4:RE3+ crystals
717
Modeling of electroosmotic and electrophoretic mobilization in capillary and microchip isoelectric focusing
718
Modeling of Electrostatic Fields for Non-harmattan season in Northern Nigeria
719
Modeling of electrostatic recognition processes in the mammalian mitochondrial steroid hydroxylase system Original Research Article
720
Modeling of ELM events and their effect on impurity enrichment
721
Modeling of EMI response of damaged Mindlin–Herrmann rod
722
Modeling of EMI response of damaged Mindlin–Herrmann rod
723
Modeling of encapsulated cell systems
724
Modeling of end-use energy consumption in the residential sector: A review of modeling techniques
725
Modeling of energy absorption of short fiber composite considering interfacial properties of fiber/matrix
726
Modeling of energy bands in ultra-thin layer quantum nanostructures for solar cell applications
727
MODELING OF ENERGY CONSUMPTION OF CUCUMBER GREENHOUSES USING ARTIFICIAL NEURAL NETWORK AND ANFIS
728
Modeling of energy distribution inside greenhouse using concept of solar fraction with and without reflecting surface on north wall
729
Modeling of energy distributions for plasma implantation
730
Modeling of energy loss to the environment from a grinding mill. Part I: Motivation, literature survey and pilot plant measurements
731
Modeling of energy loss to the environment from a grinding mill. Part II: Modeling the overall heat transfer coefficient
732
Modeling of Energy Output in Poultry for Egg Production Farms using Artificial Neural Networks
733
Modeling of Energy Spilling in Substrate-Sufficient Cultures
734
Modeling of energy-services supply systems
735
Modeling of enhanced electrocaloric effect above the Curie temperature in relaxor ferroelectrics Original Research Article
736
Modeling of enhanced penetrant diffusion in nanoparticle-polymer composite membranes
737
Modeling of environmental aspects related to reverse osmosis desalination supply chain
738
Modeling of Environmental Factors Affecting the Prevalence of Zoonotic and Anthroponotic Cutaneous, and Zoonotic Visceral Leishmaniasis in Foci of Iran: A Remote Sensing and GIS Based Study
739
Modeling of environmental four-way data from air quality control
740
Modeling of Environmental Impact Assessment Based on RIAM and TOPSIS for Desalination and Operating Units
741
Modeling of Environmental Influences at the Signal Transmission by means of VDSL and PLC Technologies
742
Modeling of environmentally significant interfaces: Two case studies
743
Modeling of enzymatic conversion in the catalytic gel layer located on a membrane surface Original Research Article
744
Modeling of episodic particulate matter events using a 3-D air quality model with fine grid: Applications to a pair of cities in the US/Mexico border
745
Modeling of Epistemic Uncertainty in Reliability Analysis of Structures Using a Robust\\ Genetic Algorithm
746
Modeling of equiaxed growth in multicomponent alloys accounting for convection and for the globular/dendritic morphological transition
747
Modeling of equilibration times at high pressure for multicomponent vapor–liquid diffusional processes
748
Modeling of erosion and deposition patterns on C–W and W–Ta twin limiters exposed to the TEXTOR edge plasmas
749
Modeling of erosion combustion of energetic materials in high-enthalpy flows
750
Modeling of Erosion Wear of Sand Water Slurry Flow through Pipe Bend using CFD
751
Modeling of Escherichia coli growth and acetate formation under different operational conditions
752
Modeling of ESD-induced confined ignition of solid rocket propellants
753
Modeling of esterification in a batch reactor coupled with pervaporation for production of ethyl acetate catalyzed by ion exchange resins
754
Modeling of esterification of acetic acid with n-butanol in the presence of Zr(SO4)2·4H2O coupled pervaporation
755
Modeling of Ethylbenzene Dehydrogenation Membrane Reactor to Investigate the Potential Application of a Microporous Hydroxy Sodalite Membrane
756
Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy
757
Modeling of Evanescent Energy in Optical Fibers
758
MODELING OF EVAPORATION REDUCTION IN DRIP IRRIGATION SYSTEM
759
MODELING OF EVAPORATION REDUCTION IN DRIP IRRIGATION SYSTEM
760
Modeling of evoked potentials of electroencephalograms: An overview
761
Modeling of evolving damage in high temperature polymer matrix composites subjected to thermal oxidation
762
Modeling of excess properties and vapor–liquid equilibrium of the system H3PO4–H2O
763
Modeling of excess vacancy annihilation at different types of sinks Original Research Article
764
Modeling of existing cooling towers in ASPEN PLUS using an equilibrium stage method
765
Modeling of extinction in turbulent diffusion flames by the velocity-dissipation-composition PDF method
766
Modeling of extraction of dyes and their mixtures from aqueous solution using emulsion liquid membrane
767
Modeling of extraction of β-carotene from apricot bagasse using supercritical CO2 in packed bed extractor
768
Modeling of extremely low frequency magnetic field sources using multipole techniques
769
Modeling of extrinsic extended defect evolution in ion-implanted silicon upon thermal annealing
770
MODELING OF EXTRUSION PROCESS USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS
771
Modeling of facesheet crack growth in titanium–graphite hybrid laminates, Part I
772
Modeling of facesheet crack growth in titanium–graphite hybrid laminates. Part II: Experimental results
773
Modeling of facilitated transport of Cr(III) using (RNH3+HSO4−) ionic liquid and pseudo-emulsion hollow fiber strip dispersion (PEHFSD) technology
774
Modeling of failure in a high temperature black liquor gasifier refractory lining
775
Modeling of failure in composites by X-FEM and level sets within a multiscale framework Original Research Article
776
Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets
777
Modeling of failure near spot welds in lap-shear specimens based on a plane stress rigid inclusion analysis
778
Modeling of farnesyltransferase inhibition by some thiol and non-thiol peptidomimetic inhibitors using genetic neural networks and RDF approaches Original Research Article
779
Modeling of fast diffusion along grain boundaries in oxide ceramics
780
Modeling of fast phase transitions dynamics in metal target irradiated by pico- and femtosecond pulsed laser
781
Modeling of fatigue contact damages formation in rolling bodies and assessment of their lifetime
782
Modeling of fatigue crack growth from a notch
783
Modeling of fatigue crack growth in a pressure vessel steel Q345R
784
Modeling of fatigue crack growth in notched fiber metal laminates
785
Modeling of fatigue crack growth rate for ferritic steels in light water reactor environments Original Research Article
786
Modeling of fatigue crack growth threshold development for a microstructurally small crack
787
Modeling of fatigue crack propagation using dual boundary element method and Gaussian Monte Carlo method
788
Modeling of fatigue damage evolution on the basis of the kinetic concept of strength
789
Modeling of fatigue damage in a polymer matrix composite
790
Modeling of fatigue damage in a polymer matrix composite
791
Modeling of fatigue damage under superimposed high-cycle and low-cycle fatigue loading for a cast aluminum alloy
792
Modeling of fatigue wear of a two-layered elastic half-space in contact with periodic system of indenters
793
Modeling of fatigue-type seismic damage for nuclear power plants
794
Modeling of fault gouges with Cosserat Continuum Mechanics: Influence of thermal pressurization and chemical decomposition as coseismic weakening mechanisms
795
Modeling of fault reactivation and induced seismicity during hydraulic fracturing of shale-gas reservoirs
796
Modeling of Fe growth on Mo(1 1 0)
797
Modeling of female human body shapes for apparel design based on cross mean sets
798
Modeling of femtosecond ablation of aluminum film with single laser pulses
799
Modeling of femtosecond laser damage threshold on the two-layer metal films
800
Modeling of femtosecond laser-induced non-equilibrium deformation in metal films
801
Modeling of fermentative hydrogen production from sweet sorghum extract based on modified ADM1
802
Modeling of fermentative hydrogen production from the bacterium Ruminococcus albus: Definition of metabolism and kinetics during growth on glucose
803
Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure
804
Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure Original Research Article
805
Modeling of ferrite structure after deformation in the two-phase region
806
Modeling of ferroelectric domains in thin films and superlattices
807
Modeling of fiber pull-out in continuous fiber reinforced ceramic composites using finite element method and artificial neural networks
808
Modeling of filtration combustion in a packed bed
809
Modeling of filtration efficiency of nanoparticles in standard filter media
810
Modeling of financial data: Comparison of the truncated Lévy flight and the ARCH(1) and GARCH(1,1) processes
811
Modeling of financial incentives for investments in energy storage systems that promote the large-scale integration of wind energy
812
Modeling of financial supply chain
813
Modeling of fire spread through a forest fuel bed using a multiphase formulation
814
Modeling of fire-tube boilers
815
Modeling of fishbone-type carbon nanofibers with cone-helix structures Original Research Article
816
Modeling of fishbone-type carbon nanofibers: A theoretical study Original Research Article
817
Modeling of fixed bed column studies for removal of boron from geothermal water by selective chelating ion exchange resins Original Research Article
818
Modeling of fixed bed methanation reactor for syngas production: Operating window and performance characteristics
819
Modeling of Flap Endonuclease Interactions with DNA Substrate
820
Modeling of flash evaporation I: Formulation of the mathematical model
821
Modeling of flexural behavior of RC beams strengthened with mechanically fastened FRP strips
822
Modeling of flexure-hinge type lever mechanisms
823
Modeling of Flight of the Line Thrower Projectile
824
Modeling of flow and contaminant transport in coupled stream–aquifer systems
825
Modeling of flow and transport at the microscale Original Research Article
826
Modeling of flow behavior of Ti–6Al–4V alloy at elevated temperatures
827
Modeling of Flow Blockage in a Liquid Metal-Cooled Reactor Subassembly with a Subchannel Analysis Code
828
Modeling of flow dynamics in laminar aerosol flow tubes
829
Modeling of flow field and separation efficiency of a deoiling hydrocyclone using large eddy simulation
830
Modeling of flow field in polymer electrolyte membrane fuel cell
831
Modeling of flow in a polymeric chromatographic monolith
832
MODELING OF FLOW NUMBER OF ASPHALT MIXTURES USING A MULTI–KERNEL BASED SUPPORT VECTOR MACHINE APPROACH
833
Modeling of flow stress for magnesium alloy during hot deformation
834
Modeling of flow stress of 42CrMo steel under hot compression
835
Modeling of flow stress of bainitic and martensitic functionally graded steels under hot compression
836
Modeling of flowing film concentrators: Part 1. Water split behaviour
837
Modeling of flue gas desulphurization using dry additives
838
Modeling of fluid filtration and near-wellbore damage along a horizontal well
839
Modeling of fluid flow and heat transfer in a trough solar collector
840
Modeling of fluid multiphase equilibria in ternary systems of carbon dioxide as the near-critical solvent and two low-volatile solutes
841
Modeling of fluid phase equilibria with two thermodynamic theories: Non-random hydrogen bonding (NRHB) and statistical associating fluid theory (SAFT)
842
Modeling of fluidized bed membrane reactors for hydrogen production from steam methane reforming with Aspen Plus
843
Modeling of fluidized bed reactor for ethylene polymerization: effect of parameters on the single-pass ethylene conversion
844
Modeling of fluidized bed reactor of ethylene polymerization
845
Modeling of fluorinated tetraphenylporphyrin nanoparticles size design via rapid expansion of supercritical solution
846
Modeling of flux decline in crossflow microfiltration using neural networks: the case of phosphate removal
847
Modeling of food intake is moderated by salient psychological group membership
848
Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics
849
Modeling of formation of binary-phase hollow nanospheres from metallic solid nanospheres Original Research Article
850
Modeling of forming efficiency using genetic programming
851
Modeling of forward pump EDFA under pump power through MATLAB
852
Modeling of fouling phenomena in cross-flow ultrafiltration of suspensions containing suspended solids and oil droplets Original Research Article
853
Modeling of fouling reduction by secondary membranes
854
Modeling of frac flowback and produced water volume from Wattenberg oil and gas field
855
Modeling of fractional-order signals from their ramp cepstra
856
Modeling of frequency-dependent impedance of the third rail used in traction power systems
857
Modeling of fresh concrete flow
858
Modeling of fresh egg pasta characteristics for egg content and albumen to yolk ratio Original Research Article
859
Modeling of fretting wear evolution in rough circular contacts in partial slip
860
Modeling of fretting wear evolution in rough circular contacts in partial slip
861
Modeling of friction using spectral analysis
862
Modeling of frost growth and frost properties with airflow over a flat plate
863
MODELING OF FROST GROWTH ON A HORIZONTAL CIRCULAR CYLINDER UNDER NATURAL CONVECTION USING FRACTAL GEOMETRY ANALYSIS
864
Modeling of frost salt scaling
865
Modeling of frosting behavior on a cold plate
866
Modeling of FS2+ center at the magnesium oxide (1 0 0) hydrated surface
867
Modeling of fuel performance and metallic fission product release behavior during HTTR normal operating conditions
868
Modeling of fuel performance and metallic fission product release behavior during HTTR normal operating conditions Original Research Article
869
Modeling of fully-developed, liquid metal, thin film flows for fusion divertor applications
870
Modeling of functionally graded materials in dynamic analyses
871
Modeling of fuzzy control mechanism of Intersection by using Colored Petri Net in the VANET In order to reduce urban traffic congestion
872
Modeling of gamma-ray energy absorption buildup factors using neural network
873
Modeling of Gapped Power Bus Structures for Isolation Using Cavity Modes and Segmentation
874
Modeling of gas condensates properties using continuous distribution functions for the characterisation of the heavy fraction
875
Modeling of gas discharge plasmas: What can we learn from it?
876
Modeling of gas dynamics in a pulse combustion chamber to predict initial drying process parameters
877
Modeling of gas flow inside and outside the nozzle used in spray deposition
878
Modeling of Gas Hydrate Formation in the Presence of Inhibitors by Intelligent Systems
879
Modeling of gas solubilities in polymers with cubic equation of state
880
Modeling of Gas Solubility Data for HFCs–Lubricant Oil Binary Systems by Means of the SRK Equation of State
881
Modeling of gas solubility in brine
882
Modeling of gas transport in a microporous solid using a slice selection procedure: Application to the diffusion of benzene in ZSM5
883
Modeling of gas transport through a tubular solid oxide fuel cell and the porous anode layer
884
Modeling of gaseous adsorption of activated carbon bed by Wheeler–Jonas equation and estimation of breakthrough time using the extended equation
885
Modeling of gaseous radiant exchange with the smooth (reordered) band model
886
Modeling of gasification and fragmentation behavior of char particles having complicated structures
887
Modeling of Gas-Liquid Reactions in Ladle Metallurgy: Part I. Physical Modeling
888
Modeling of Gas-Liquid Reactions in Ladle Metallurgy: Part II. Numerical Simulation
889
Modeling of gas–liquid reactions in porous membrane microreactors
890
Modeling of Gauss elimination technique for multi-objective linear programming problem
891
Modeling of gene expression pattern alteration by p,p′-DDE and dieldrin in largemouth bass
892
Modeling of Generation and Growth of Non-Spherical Nanoparticles in a Co-Flow Flame
893
Modeling of generators and their controls in power system simulations using singular perturbations
894
Modeling of geochemical processes related to uranium mobilization in the groundwater of a uranium mine
895
Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools
896
Modeling of geometry effects in fretting fatigue
897
Modeling of geothermal energy production from stratigraphic reservoirs in the Great Basin
898
Modeling of germanium atomic-layer-epitaxy
899
Modeling of germination and growth of ochratoxigenic isolates of Aspergillus ochraceus as affected by water activity and temperature on a barley-based medium Original Research Article
900
Modeling of glancing incidence X-ray for depth profiling of thin layers
901
Modeling of glass sintering applied for the fabrication of porous glass bodies
902
Modeling of global biomass policies
903
Modeling of global particle balance in steady-state magnetic fusion devices – Analysis of the recent data from the TRIAM-1M tokamak
904
Modeling of global variations and ring shadowing in Saturnʹs ionosphere
905
Modeling of glucose isomerization in a fluidized bed immobilized enzyme bioreactor
906
Modeling of grabens extending above evaporites in Canyonlands National Park, Utah
907
Modeling of grain boundary barrier modulation in ZnO invisible thin film transistors
908
Modeling of grain boundary character reconstruction and predicting intergranular fracture susceptibility of textured and random polycrystalline materials
909
Modeling of grain growth in two dimensions Original Research Article
910
Modeling of grain growth mechanism by nickel silicide reactive grain boundary effect in metal-induced-lateralcrystallization
911
Modeling of grain pull-out forces in polycrystalline alumina
912
Modeling of grain pull-out forces in polycrystalline alumina
913
Modeling of grain refinement by cellular automata
914
Modeling of grain refinement in aluminum and copper subjected to cutting
915
Modeling of grain size effect on micro deformation behavior in micro-forming of pure copper
916
Modeling of graphene-based NEMS
917
Modeling of graphite oxidation in a stagnation-point flow field using detailed homogeneous and semiglobal heterogeneous mechanisms with comparisons to experiments
918
Modeling of graphitization kinetics during peritectic melting of tungsten carbide Original Research Article
919
Modeling of Greenhouse Gas Emissions in Dairy Farms
920
Modeling of greenhouse with PCM energy storage
921
Modeling of gross and net carbon dioxide exchange over a cool-temperate deciduous broad-leaved forest in Japan: Analysis of seasonal and interannual change
922
Modeling of ground grid and metallic structure currents in high voltage a.c. substations for the computation of electromagnetic fields
923
Modeling of Groundnut Shell Mercerization Process Using a Neuro-Fuzzy Technique
924
Modeling of Groundwater Artificial Recharge by Reactivating an Old Stream Bed
925
Modeling of Groundwater Flow over Sloping Beds in Response to Constant Recharge and Stream of Varying Water Level
926
Modeling of groundwater heads based on second-order difference time series models
927
Modeling of Groundwater Recharge by Rainwater Harvesting-Wadi Bayer (Case Study)
928
Modeling of Groundwater Resources Heavy Metals Concentration Using Soft Computing Methods: Application of Different Types of Artificial Neural Networks
929
Modeling of groundwater salinity on the Persian Gulf coastal plain By using linear moments and ANFIS-PSO
930
Modeling of growth and bacteriocin production by Leuconostoc mesenteroides E131
931
Modeling of Growth and Welfare Effects of Tax Reform in Iran: A Static Computable General Equilibrium Analysis
932
Modeling of Growth, Lactate Consumption, and Volatile Fatty Acid Production by Megasphaera elsdenii Cultivated in Minimal and Complex Media
933
Modeling of H2O adsorption-induced curvature of a metal/silicon nanocantilever
934
Modeling of Hammerstein-Wiener Processes with Special Input Test Signals
935
Modeling of hard part machining: effect of insert edge preparation in CBN cutting tools
936
Modeling of harmonic contributions to non-symmetrical RF plasmas
937
Modeling of Heart Excitation Patterns caused by a Local Inhomogeneity
938
Modeling of heat and mass transfer in accelerator targets during postulated accidents
939
Modeling of heat and mass transfer in accelerator targets during postulated accidents Original Research Article
940
Modeling of heat and mass transfer in parallel plate liquid-desiccant dehumidifiers
941
Modeling of heat and moisture transport by periodic ventilation of thin cotton fibrous media
942
Modeling of heat capacities of multi-walled carbon nanotubes by molecular structural mechanics
943
Modeling of Heat Conduction in Thermoplastic Honeycomb Core/Face Sheet Fusion Bonding
944
Modeling of heat deposition on the W/Cu movable limiter in HT-7
945
Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions
946
Modeling of Heat Losses Within Combustion Chamber of Diesel Engines
947
Modeling of heat transfer and differential diffusion in transported PDF methods
948
Modeling of heat transfer and energy analysis of potato slices and cylinders during solar drying
949
Modeling of heat transfer and evaporative mass losses during the cooking of beef patties using far-infrared radiation Original Research Article
950
Modeling of heat transfer and fluid flow characteristics of helicoidal double-pipe heat exchangers using Adaptive Neuro-Fuzzy Inference System (ANFIS)
951
Modeling of heat transfer and solidification in LIVE L3A experiment
952
Modeling of Heat Transfer and Solidification of Composite Roll
953
Modeling of Heat Transfer and Solidification Process of Spray Formed Billet
954
Modeling of heat transfer and turbulent flows inside industrial furnaces
955
Modeling of heat transfer coefficient in the furnace of CFB boilers by artificial neural network approach
956
Modeling of heat transfer during controlled cooling in hot rod rolling of carbon steels
957
Modeling of heat transfer enhancement by wire coil inserts using artificial neural network analysis
958
Modeling of heat transfer for flow across tube banks
959
Modeling of heat transfer in a turbulent flow around a heat-conducting plate with local regions of heating
960
Modeling of heat transfer in tanks during wine-making fermentation
961
Modeling of heat transfer in thermoplastic composite tape lay-up manufacturing
962
Modeling of heat transfer in turbulent gas–solid flow
963
Modeling of heat treatment processes for composite materials
964
Modeling of heating and cooling performance of counter flow type vortex tube by using artificial neural network
965
Modeling of heavy metal ion binding by phosphoric acid activated carbon
966
Modeling of heavy metal migration in sand/bentonite and the leachate pH effect
967
Modeling of He–defect interactions in ferritic alloys for fusion
968
Modeling of helical gear contact with tooth deflection
969
Modeling of helicopter-borne tunable TEA CO2 DIAL system employment for detection of methane and ammonia leakages
970
Modeling of helium bubble nucleation and growth in neutron irradiated boron doped RAFM steels
971
Modeling of heterogeneous chemical reactions caused in pyrolysis of biomass particles
972
Modeling of heterogeneous surfaces and characterization of porous materials by extending density functional theory for the case of amorphous solids
973
Modeling of heterojunction bipolar transistors at any temperature, pressure, strain and alloy composition
974
Modeling of hierarchical fuzzy systems
975
Modeling of high energy ion implantation based on splitting of the Boltzmann transport equation
976
Modeling of high power automotive batteries by the use of an automated test system
977
Modeling of high power laser interaction with APS deposited FeCrTiC
978
Modeling of high strength steel joints bonded with toughened adhesive for vehicle crash simulations
979
Modeling of high temperature- and diffusion-controlled die soldering in aluminum high pressure die casting
980
Modeling of High Temperature GaN Quantum Dot Infrared Photodetectors
981
Modeling of high temperature proton exchange membrane fuel cells with novel sulfonated polybenzimidazole membranes
982
Modeling of high temperature rheological behavior of AZ61 Mg-alloy using inverse method and ANN
983
Modeling of high velocity impact of spherical particles
984
Modeling of high-concentration gas-particle flow in a horizontal channel
985
Modeling of high-conversion binary copolymerization
986
Modeling of high-density compaction of granular materials by the Discrete Element Method
987
Modeling of higher order systems using artificial bee colony algorithm
988
Modeling of highly multimode waveguides for time-domain simulation
989
Modeling of high-pressure CO dissociation on Pt(1 0 0) and Pt(1 1 1)
990
Modeling of high-pressure vapor–liquid equilibrium in ionic liquids + gas systems using the PRSV equation of state
991
Modeling of high-temperature treatment of wood using the reaction engineering approach (REA)
992
Modeling of high-tension roll separator for separation of titanium bearing minerals
993
Modeling of highway stormwater runoff
994
Modeling of HMX/GAP pseudo-propellant combustion
995
Modeling of homogeneous mercury speciation using detailed chemical kinetics
996
Modeling of horizontal geoexchange systems for building heating and permafrost stabilization
997
Modeling of horizontal tube-bundle absorbers of absorption cooling systems
998
Modeling of Hot Deformation Behavior of 55SiMnMo Medium-Carbon Steel Original Research Article
999
Modeling of hot tearing formation during solidification
1000
Modeling of hot-wall condensers for domestic refrigerators
