<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Optimization of fed-batch enzymatic hydrolysis from alkali-pretreated sugarcane bagasse for high-concentration sugar production
2
Optimization of fed-batch fermentation processes with bio-inspired algorithms
3
Optimization of Feed Point Location of Low Profile Triangular Patch Antenna
4
Optimization of feedforward neural networks
5
Optimization of feeding rates for Persian sturgeon (Acipenser persicus Borodin, 1897)
6
Optimization of feedstock properties for reaction-bonded net-shape zircon ceramics by design of experiments
7
Optimization of Fenton Oxidation to Treat Textile Wastewater
8
Optimization of Fentonʹs oxidation of chemical laboratory wastewaters using the response surface methodology
9
Optimization of fermentable sugar production from rape straw through hydrothermal acid pretreatment
10
Optimization of fermentation conditions for pullulan production by Aureobasidium pullulan using response surface methodology
11
Optimization of fermentation conditions for pullulan production by Aureobasidium pullulan using response surface methodology
12
Optimization of Fermentation Conditions for Recombinant Human Interferon Beta Production by Escherichia coli Using the Response Surface Methodology
13
optimization of fermentation conditions for recombinant human interferon beta production by escherichia coli using the response surface methodology
14
Optimization of Fermentation Conditions for Reteplase Expression by Escherichia coli Using Response Surface Methodology
15
Optimization of fermentation conditions for the production of ethanol from sago starch by co-immobilized amyloglucosidase and cells of Zymomonas mobilis using response surface methodology
16
Optimization of fermentation conditions for the production of pullulan by a new strain of Aureobasidium pullulans isolated from sea mud and its characterization
17
Optimization of fermentation conditions for the production of the mezcal from Agave salmiana using response surface methodology
18
Optimization of Fermentation Conditions to Enhance Cytotoxic Metabolites Production by Bacillus velezensis Strain RP137 from the Persian Gulf
19
Optimization of fermentation media for nitrite oxidizing bacteria using sequential statistical design
20
Optimization of fermentation parameters to study the behavior of selected lactic cultures on soy solid state fermentation
21
Optimization of Fermentation Reaction Conditions for Preparation of PATE Enzyme by Erwinia carotovora IF03830 by TFCCRD Method
22
Optimization of Fermentation Time for Iranian Black Tea Production
23
Optimization of fermentative biohydrogen production by response surface methodology using fresh leachate as nutrient supplement
24
Optimization of fermentative hydrogen production from hydrolysate of microwave assisted sulfuric acid pretreated oil palm trunk by hot spring enriched culture
25
Optimization of fermentative hydrogen production process by response surface methodology
26
Optimization of fermentative hydrogen production process using genetic algorithm based on neural network and response surface methodology
27
Optimization of ferrous biooxidation rate in a packed bed bioreactor using Taguchi approach
28
Optimization of Ferulago Angulata oil extraction with supercritical carbon dioxide
29
Optimization of feruloyl esterase-catalyzed synthesis of feruloylated oligosaccharides by response surface methodology
30
Optimization of FFU synthetic sleeper shape in terms of ballast lateral resistance
31
Optimization of fiber distribution in fiber reinforced composite by using NURBS functions
32
Optimization of fiber geometry for fiber reinforced composites considering damage
33
Optimization of fiber reinforced composites
34
Optimization of fibre reinforcement for waste aggregate cement composite
35
Optimization of fibrin scaffolds for differentiation of murine embryonic stem cells into neural lineage cells
36
Optimization of fibrinolytic enzyme production by Bacillus subtilis DC-2 in aqueous two-phase system (poly-ethylene glycol 4000 and sodium sulfate)
37
Optimization of fibrous laminates undergoing progressive damage
38
Optimization of filler distribution for organic phase change material composites: Numerical investigation and entropy analysis
39
Optimization of filter designs with dependent and asymmetrically distributed parameters
40
Optimization of filtered neutron beams for the calibration of superheated droplet detectors at the RPI
41
Optimization of filtered neutron beams for the calibration of superheated droplet detectors at the RPI
42
Optimization of fin arrangement and channel configuration in an airfoil fin PCHE for supercritical CO2 cycle
43
Optimization of Finasteride Nano-Emulsion Preparation Using Chemometric Approach
44
Optimization of fineness to maximize the strength activity of high-calcium ground fly ash – Portland cement composites
45
Optimization of finite element bidimensional models: an approach based on genetic algorithms
46
Optimization of finite element grids using shape sensitivity analysis in terms of nodal positions
47
Optimization of finite-length input volume holographic grating couplers illuminated by finite-width incident beams
48
Optimization of finned-tube condensers using an intelligent system
49
Optimization of FIR Filter Using PSO Based Algorithm
50
Optimization of fire tube heat recovery steam generators for cogeneration plants through genetic algorithm
51
Optimization of fish-oil-based biodiesel synthesis
52
Optimization of fixed-polarity Reed-Muller circuits using dual-polarity property
53
Optimization of Flame Synthesis of CNT Structures using Statistical Design of Experiments (SDOE)
54
Optimization of flat-cone targets for enhanced laser-acceleration of protons
55
Optimization of flat-cone targets for enhanced laser-acceleration of protons
56
Optimization of flavanones extraction by modulating differential solvent densities and centrifuge temperatures
57
Optimization of FLEC®-SPME for field passive sampling of VOCs emitted from solid building materials
58
Optimization of Flight Endurance for Turboprop Air Taxis Using Metaheuristic Algorithms
59
Optimization of flocculation conditions for kaolin suspension using the composite flocculant of MBFGA1 and PAC by response surface methodology
60
Optimization of flocculation conditions for the separation of TiO2 particles in coagulation-photocatalysis hybrid water treatment
61
Optimization of floor-level construction material layout using Genetic Algorithms
62
Optimization of flow geometries applying quasianalytical sensitivity analysis
63
Optimization of flow stress in cool deformed Nb-microalloyed steel by combining strain induced transformation of retained austenite, cooling rate and heat treatment Original Research Article
64
Optimization of flow-channel depth for conventional flat-plate solar air heaters
65
Optimization of fluid flow and internal geometric structure of volumes cooled by forced convection in an array of parallel tubes
66
Optimization of fluorescence property of the 8-oxodGclamp derivative for better selectivity for 8-oxo-2′-deoxyguanosine
67
Optimization of Fluorescent Silicon Nanomaterial Production Using Peroxide/Acid/Salt Technique : (Pengoptimuman Penghasilan Nanobahan Silikon Berpendaflour Menggunakan Teknik Peroksida/Asid/Garam)
68
Optimization of fluoride in water using alum with response surface methodology
69
Optimization of fluorine determination via the molecular absorption of gallium mono-fluoride in a graphite furnace using a high-resolution continuum source spectrometer
70
Optimization of flux and selectivity in Cl−/SO42− separations with multilayer polyelectrolyte membranes
71
Optimization of fly ash content in concrete: Part I: Non-air-entrained concrete made without superplasticizer
72
Optimization of foam-filled bitubal structures for crashworthiness criteria
73
Optimization of foaming process using triblock polyimides with thermally labile blocks
74
Optimization of focused ultrasonic extraction of propellant components determined by gas chromatography/mass spectrometry
75
Optimization of fog inlet air cooling system for combined cycle power plants using genetic algorithm
76
Optimization of food waste hydrolysis in leach bed coupled with methanogenic reactor: Effect of pH and bulking agent
77
Optimization of forced convection heat sinks with pumping power requirements
78
Optimization of Forestry, Infrastructure and Fire Management
79
Optimization of forging process parameters of Ti600 alloy by using processing map
80
Optimization of formation analysis and evaluation protocols using neuro-simulation
81
OPTIMIZATION OF FORMATION, DISTRIBUTION AND USE OF MONETARY RESOURCES OF THE FINANCIAL SECTOR OF THE COUNTRY
82
Optimization of Fortified Dough Composition for Spaghetti Production using Strong Wheat Flour
83
Optimization of foundry sand characteristics of soda-activated calcium bentonite
84
Optimization of FPGA configurations using parallel genetic algorithm
85
Optimization of Freestream Flow Effects on Thrust Shock Vector Control Nozzle
86
Optimization of freezing point regulator and its penetration dynamics on large yellow croaker
87
Optimization of Frequency Distribution of Storm-Water Discharges for Coastal Ecosystem Restoration
88
Optimization of freshwater microalgal biomass harvest using polymeric flocculants
89
Optimization of friction stir welding parameters for dissimilar aluminum alloys
90
Optimization of Friction Stir Welding Parameters for Dissimilar Joining of Aluminum Alloy 2024 and Magnesium Alloy AZ91C Using Taguchi Method
91
Optimization of friction stir welding parameters with Taguchi method for maximum electrical conductivity in Al-1080 welded sections
92
Optimization of friction welding parameters using evolutionary computational techniques
93
Optimization of Friction Welding Process Parameters for Joining Carbon Steel and Stainless Steel Original Research Article
94
Optimization Of FRM Filters Using The WLS–Chebyshev Approach
95
Optimization of front metal contact firing scheme to achieve high fill factors on screen printed silicon solar cells
96
Optimization of front surface texturing processes for high-efficiency silicon solar cells
97
Optimization of frozen sour cherries vacuum drying process
98
Optimization of FRP composites against impact induced failure using island model parallel genetic algorithm
99
Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique
100
Optimization of FSW process parameters for welding dissimilar 6061 and 7075 Al alloys using Taguchi design approach
101
Optimization of fuel production from waste vehicle tires by pyrolysis and resembling to diesel fuel by various desulfurization methods
102
Optimization of fuel ratio in solution combustion method for fabrication of nickel aluminate spinel used in the esterification reaction
103
Optimization of fuel/air mixture formation for stoichiometric diesel combustion using a 2-spray-angle group-hole nozzle
104
Optimization of fully coupled electrostatic–fluid–structure interaction problems
105
Optimization of fumaric acid production by Rhizopus delemar based on the morphology formation
106
Optimization of Functional Properties of Three Stabilizers and κ-carrageenan in Ice Cream and Study of their Synergism
107
Optimization of Functionally Graded Beams Resting on Elastic Foundations
108
Optimization of functions of matrices with an application in statistics Original Research Article
109
Optimization of functions with rank-two variation over a box
110
Optimization of fungal polygalacturonase synthesis by Saccharomyces cerevisiae in fed-batch culture
111
Optimization of fungal polygalacturonase synthesis by Saccharomyces fungal polygalacturonase synthesis by Saccharomyces
112
Optimization of furfural and 5-hydroxymethylfurfural production from wheat straw by a microwave-assisted process
113
Optimization of furfural production from d-xylose with formic acid as catalyst in a reactive extraction system
114
Optimization of furfural production from hemicellulose extracted from delignified palm pressed fiber using a two-stage process Original Research Article
115
Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology
116
Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology
117
Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique
118
Optimization of Fuse-Recloser Coordination and Dispersed Generation Capacity in Distribution Systems
119
OPTIMIZATION OF FUZZY CLUSTERING CRITERIA BY A HYBRID PSO AND FUZZY C-MEANS CLUSTERING ALGORITHM
120
Optimization of Fuzzy Controller for an SMA-actuated Artificial Finger Robot
121
Optimization of fuzzy membership functions via PSO and GA with application to quad rotor
122
Optimization of fuzzy model using genetic algorithm for process control application
123
Optimization of fuzzy production inventory models
124
Optimization of fuzzy relation equations with max-product composition
125
Optimization of fuzzy relational equations with max-av composition
126
Optimization of Fuzzy Zero- Base Budgeting
127
Optimization of fuzzy-logic speed controller for DC drive system with elastic joints
128
Optimization of GaAs amplification photodetectors for 700% quantum efficiency
129
Optimization of gain and energy conversion efficiency using front-facing photovoltaic cell luminescent solar concentratordesign
130
Optimization of Gamma Aminobutyric Acid Production from Various Protein Hydrolysates by Lactiplantibacillus plantarum MCM4
131
Optimization of Gamma Knife treatment planning via guided evolutionary simulated annealing
132
Optimization of gammaaminobutyric acid production by probiotic bacteria through response surface methodology
133
Optimization of Gamma-Aminobutyric Acid Production in Probiotics Extracted from Local Dairy Products in West Region of Iran using MRS broth and Whey Protein Media
134
Optimization of gamma-ray beams produced by a laser-plasma accelerator
135
Optimization of gamma-ray beams produced by a laser-plasma accelerator
136
Optimization of Garden radish (Raphanus Sativus L.) Peroxidase Enzyme for Removal of 2,4-dichlorophenol from 2,4- Dichlorophenoxyacetic Acid Wastewater
137
Optimization of gas chromatographic–mass spectrometric analysis for fatty acids in hydrogenated castor oil obtained by catalytic transfer hydrogenation
138
Optimization of gas chromatographic–mass spectrometric analysis for fatty acids in hydrogenated castor oil obtained by catalytic transfer hydrogenation Original Research Article
139
Optimization of gas chromatography–single quadrupole mass spectrometry conditions for multiresidue analysis of pesticides in grapes in compliance to EU-MRLs
140
Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: Evaluation of polymer binders in catalyst layer
141
Optimization of gas diffusion media for elevated temperature polymer electrolyte fuel cells
142
Optimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
143
Optimization of gas mixing system of premixed burner based on CFD analysis
144
Optimization of gas tungsten arc welding process by response surface methodology
145
OPTIMIZATION OF GAS TURBINE POWER PLANT BY EVOLOUTIONARY ALGORITHM; CONSIDERING EXERGY, ECONOMIC and ENVIRONMENTAL ASPECTS
146
Optimization of gas utilization in plasma processes
147
Optimization of Gateway Deployment with Load Balancing and Interference Minimization in Wireless Mesh Networks
148
Optimization of GC–ICPMS system parameters for the determination of butyltin compounds in Hungarian freshwater origin sediment and mussel samples
149
Optimization of GDLs for high-performance PEMFC employing stainless steel bipolar plates
150
Optimization of gear ratios and gear-shifting strategy for enhanced efficiency in tracked vehicles
151
Optimization of gelatin extraction and physico-chemical properties of catfish (Clarias gariepinus) bone gelatin
152
Optimization of gelatine extraction from grass carp (Catenopharyngodon idella) fish skin by response surface methodology
153
Optimization of gelatine gel preparation from New Zealand hoki (Macruronus novaezelandiae) skins and the effect of transglutaminase enzyme on the gel properties
154
Optimization of gelatinolytic enzyme production by B. amyloliquefaciens sp. H11 through Plackett–Burman design and response surface methodology
155
Optimization of Gelation to Prepare Hollow Foam Shell of Resorcinol-Formalin Using a Phase-Transfer Catalyst
156
Optimization of gene sequences under constant mutational pressure and selection
157
Optimization of Gene Transfection in Murine Myeloma Cell Lines using Different Transfection Reagents
158
Optimization of general nonlinear input-output systems Original Research Article
159
Optimization of generalized mean square error in signal processing and communication
160
Optimization of generator temperatures in the heat operated absorption cycle using four types of aqueous salt solutions
161
Optimization of geometric parameters for design a high-performance ejector in the proton exchange membrane fuel cell system using artificial neural network and genetic algorithm
162
Optimization of geometric parameters for Marinelli beaker to maximize the detection efficiency of an HPGe detector
163
Optimization of geometric parameters for Marinelli beaker to maximize the detection efficiency of an HPGe detector
164
Optimization of geometrical characteristics of perforated plates
165
Optimization of geometrical parameters for Stirling engines based on theoretical analysis
166
Optimization of geometrically nonlinear elastic-plastic structures under stiffness constraints
167
Optimization of geometrically non-linear symmetric systems with coincident critical points
168
Optimization of geometry for lateral buckling process of a cantilever beam in the elastic region
169
Optimization of Geoscience Laser Altimeter System waveform metrics to support vegetation measurements
170
Optimization of germination process of cowpea by response surface methodology
171
Optimization of Glare Block Spacing
172
Optimization of glass–ceramic sealant compositions in the system MgO–BaO–SiO2 for solid oxide fuel cells (SOFC)
173
Optimization of glassy carbon electrode based graphene/ferritin/glucose oxidase bioanode for biofuel cell applications
174
Optimization of glenoid fixation in reverse shoulder arthroplasty using 3-dimensional modeling
175
Optimization of global and local pollution control in electricity production from coal burning
176
Optimization of globin lentiviral vector design for the treatment of β-thalassemia
177
Optimization of glottic exposure during intubation of a patient lying supine on the ground
178
Optimization of glucose formation in karanja biomass hydrolysis using Taguchi robust method
179
Optimization of glucose-6-phosphate dehydrogenase releasing from Candida guilliermondii by disruption with glass beads
180
Optimization of Glutathione S-Transferase in the Sera of Young Female Iraqi Patients with Diabetes Mellitus Type1Optimization of Glutathione S-Transferase in the Sera of Young Female Iraqi Patients with Diabetes Mellitus Type1
181
Optimization of Gluten-Free Bread Formulation Using Sorghum, Rice, and Millet Flour by D-Optimal Mixture Design Approach
182
Optimization of glycemic control and restenosis prevention in diabetic patients undergoing percutaneous coronary interventions
183
Optimization of glycerol ketalization to produce solketal as biodiesel additive in a continuous reactor with subcritical acetone using Purolite® PD206 as catalyst
184
Optimization of gold-nanoparticle-based optical fibre surface plasmon resonance (SPR)-based sensors
185
Optimization of gradient elution conditions in multicomponent preparative liquid chromatography
186
Optimization of gradient reversed phase chromatographic peak capacity for low molecular weight solutes
187
Optimization of graffiti removal on natural stone by means of high repetition rate UV laser
188
Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering Original Research Article
189
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach
190
Optimization of Greenhouse Substrate Heating
191
Optimization of grid independent diesel-based hybrid system for power generation using improved particle swarm optimization algorithm
192
Optimization of grid-connected microgrid consisting of PV/FC/UC with considered frequency control
193
Optimization of Grignard ring-opening of α-brominated dioxolanes for the preparation of β-hydroxy-protected vinyl ethers by a three-step one-pot procedure
194
OPTIMIZATION OF GRI-MECH 3.0 MECHANISM USING HCCI COMBUSTION MODELS AND GENETIC ALGORITHM
195
Optimization of grinding parameters in the production of colorant paste
196
Optimization of grinding process parameters using enumeration method
197
Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics
198
Optimization of grounding grids by response surfaces and genetic algorithms
199
Optimization of growth conditions for the isolation of dextran producing Leuconostoc spp. from indigenous food sources
200
Optimization of Growth Conditions of Lentinus edodes Mycelium and polysaccharides on Walnut shell by-products Using Response Surface Analysis
201
Optimization of growth media for obtaining high-cell density cultures of halophilic archaea (family Halobacteriaceae) by response surface methodology
202
Optimization of growth of ternary CuInS2 thin films by ionic reactions in alkaline chemical bath as n-type photoabsorber layer
203
Optimization of H2 photo-fermentation from benzoate by Rhodopseudomonas palustris using a desirability function approach
204
Optimization of H2 production with CO2 capture by steam reforming of methane integrated with a chemical-looping combustion system
205
Optimization of H2SO4-catalyzed hydrothermal pretreatment of rapeseed straw for bioconversion to ethanol: Focusing on pretreatment at high solids content
206
Optimization of hairy root induction in chicory (Cichorium intybus L.) and effects of nanoparticles on secondary metabolites accumulation
207
Optimization of Halopemide for Phospholipase D2 inhibition
208
Optimization of Hand Gesture Object Detection Using Fine-Tuning Techniques on an Integrated Service of Smart Robot
209
OPTIMIZATION OF HARAZ DAM RESERVOIR OPERATION USING CBO METAHEURISTIC ALGORITHM
210
Optimization of hardening of Al–Zr–Sc cast alloys
211
Optimization of Hardness Strengths Response of Plantain Fibers Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design
212
Optimization of harvesting age in an integral age-dependent model of population dynamics
213
Optimization of HDPE direct fluorination conditions by XPS studies
214
Optimization of Head CT Protocol to Reduce the Absorbed Dose in Eye Lenses and Thyroid: A Phantom Study
215
Optimization of headspace experimental factors to determine chlorophenols in water by means of headspace solid-phase microextraction and gas chromatography coupled with mass spectrometry and parallel factor analysis Original Research Article
216
Optimization of headspace sampling using solid-phase microextraction for volatile components in tobacco
217
Optimization of headspace single-drop microextraction technique for extraction of light hydrocarbons (C6–C12) and its potential applications
218
Optimization of headspace solid phase microextraction (HS-SPME) for gas chromatography mass spectrometry (GC-MS) analysis of aroma compound in palm sugar (Arenga pinnata)
219
Optimization of headspace solid phase microextraction (HS-SPME) for gas chromatography mass spectrometry (GC-MS) analysis of aroma compound in palm sugar (Arenga pinnata)
220
Optimization of headspace solid phase microextraction based on nano-structured ZnO combined with gas chromatography–mass spectrometry for preconcentration and determination of ultra-traces of chlorobenzenes in environmental samples
221
Optimization of headspace solid phase microextraction for gas chromatography/mass spectrometry analysis of widely different volatility and polarity terpenoids in olibanum
222
Optimization of headspace solid-phase microextraction by means of an experimental design for the determination of methyl tert.-butyl ether in water by gas chromatography–flame ionization detection
223
Optimization of headspace solid-phase microextraction conditions for the determination of organophosphorus insecticides in natural waters
224
Optimization of headspace solid-phase microextraction for analysis of ethyl carbamate in alcoholic beverages using a face-centered cube central composite design Original Research Article
225
Optimization of headspace solid-phase microextraction for analysis of β-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil Original Research Article
226
Optimization of headspace solid-phase microextraction for the analysis of specific flavors in enzyme modified and natural Cheddar cheese using factorial design and response surface methodology
227
Optimization of headspace solid-phase microextraction gas chromatography-atomic emission detection analysis of monomethylmercury
228
Optimization of Headspace Temperature and Time Sampling for Identification of Palm Sugar Volatile Components Using Response Surface Methodology
229
Optimization of Health Transformation Plan by Drug Utilization Review Strategy in a Pediatric Teaching Hospital
230
Optimization of Heart Failure Patients Discharge Plan in Rajaie Cardiovascular Medical and Research Center: An Action Research
231
Optimization of heat conduction using combinatorial optimization algorithms
232
Optimization of heat exchanger designs in metal hydride based hydrogen storage systems
233
Optimization of heat exchanger network
234
Optimization of heat exchangers with vortex-generator fin by Taguchi method
235
Optimization of heat pipe with axial “Ω”-shaped micro grooves based on a niched Pareto genetic algorithm (NPGA)
236
Optimization of heat pump fruit dryers Original Research Article
237
Optimization of heat pump system in indoor swimming pool using particle swarm algorithm
238
Optimization of heat recovery steam generators for combined cycle gas turbine power plants
239
Optimization of heat sink configuration for thermoelectric cooling system based on entropy generation analysis
240
Optimization of Heat Sink Geometries for Impingement Air-Cooling of LSI Packages
241
Optimization of Heat Sink Geometries for Impingement Air-Cooling of LSI Packages
242
Optimization of heat transfer characteristics, flow distribution, and reaction processing for a microstructured reactor/heat-exchanger for optimal performance in platinum catalyzed ammonia oxidation
243
Optimization of heat transfer device and analysis of heat & mass transfer on the finned multi-tubular metal hydride tank
244
Optimization of Heat Transfer Enhancement of a Domestic Gas Burner Based on Pareto Genetic Algorithm: Experimental and Numerical Approach
245
OPTIMIZATION OF HEAT TRANSFER ENHANCEMENT OF A FLAT PLATE BASED ON PARETO GENETIC ALGORITHM
246
Optimization of Heat Transfer in an Enclosure with a Trombe Wall and Solar Chimney
247
Optimization of heat transfer performances of a heat-recirculating ceramic burner during methane/air and low-calorific-fuel/air combustion
248
Optimization of heat transfer utilizing graph based evolutionary algorithms
249
Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC
250
Optimization of heat treatment in cold-drawn 6063 aluminium tubes
251
Optimization of heat treatment technique of high-vanadium high-speed steel based on back-propagation neural networks
252
Optimization of heating and cooling of a building by employing refuse and renewable energy
253
Optimization of heat–mass transfer at continuous solid layer crystallization on a belt
254
Optimization of heavy metals chlorides resistance by Staphylococcus aureus and its ability to remove them
255
Optimization of heavy metals total emission, case study: Bor (Serbia)
256
Optimization of He-cooled divertor cooling fingers using a CAD-FEM method
257
Optimization of hedging rules for hydropower reservoir operation
258
Optimization of heme iron analysis in raw and cooked red meat
259
Optimization of heterogeneous biodiesel production from waste cooking palm oil via response surface methodology
260
Optimization of heterotrophic cultivation of Chlorella sp. for oil production
261
OPTIMIZATION OF HFDS PRODUCTION FROM DATE SYRUP
262
Optimization of hierarchical routing protocols
263
Optimization of high energy intensity systems, case study: Electric arc furnace
264
Optimization of high free fatty acid reduction in mixed crude palm oils using circulation process through static mixer reactor and pilot-scale of two-step process
265
Optimization of High Molecular Weight Pullulan Production by Aureobasidium pullulans in Batch Fermentations
266
OPTIMIZATION OF HIGH-CROWD-DENSITY FACILITIES BASED ON DISCRETE EVENT SIMULATION
267
Optimization of high-dose-rate cervix brachytherapy applicator placement: The benefits of intraoperative ultrasound guidance
268
Optimization of Higher Order Pulse Shapers Used for Reduction of Noise in Amplifier Circuits
269
Optimization of highly conductive insert architecture for cooling a rectangular chip
270
OPTIMIZATION OF HIGH-PERFORMANCE CONCRETE STRUCTURES BY VARIABLE NEIGHBORHOOD SEARCH
271
Optimization of high-pressure shell-and-tube heat exchanger for syngas cooling in an IGCC
272
Optimization of high-solid waste activated sludge concentration for hydrogen production in microbial electrolysis cells and microbial community diversity analysis
273
Optimization of high-voltage self-blast interrupters by gas flow and electric field computations
274
Optimization of highway networks and traffic forecasting
275
Optimization of HIPE Foams
276
Optimization of Holding Temperature and Holding Thickness for Controlled Rolling on Plate Mill Original Research Article
277
Optimization of Hole Cleaning in Deviated Wells Using Metaheuristic Algorithms
278
Optimization of hole-making operations for injection mould using particle swarm optimization algorithm
279
Optimization of hollow cathode diameter for particle beam/hollow cathode glow discharge atomic emission spectrometry
280
Optimization of hollow fibers membrane wastewater treatment: An experimental study Original Research Article
281
Optimization of Hollow-Fiber Design and Low-Pressure Membrane System Operation
282
Optimization of homoexopolysaccharide formation by lactobacilli in gluten-free sourdoughs Original Research Article
283
Optimization of homogenization for a low alloyed AlMgSi alloy
284
Optimization of honey-must preparation and alcoholic fermentation by Saccharomyces cerevisiae for mead production
285
Optimization of honing wheel structure parameters in ultra-precision plane honing
286
Optimization of horizontal drain dimensions in heterogeneous earth dams using Artificial Neural Network (ANN): A case study on Marvak dam
287
Optimization of horizontal drain dimensions in homogeneous earth dams using neural network
288
Optimization of Horizontal Road Alignment Based on Parameters Affecting its Cost and Lifespan Using Genetic Algorithm
289
Optimization of horseradish peroxidase-catalyzed enhanced chemiluminescence reaction by full factorial design
290
Optimization of Hospital Layout through the Application of Heuristic Techniques (Diamond Algorithm) in Shafa Hospital (2009)
291
Optimization of host glass composition to make soda borosilicate glasses doped with reduced rare earth ions
292
Optimization of hot air drying of olive leaves using response surface methodology Original Research Article
293
Optimization of Hot Metal Gas Forming by Taguchi Method for Production Step-tubes from AA6063
294
Optimization of hot pressing parameters in membrane electrode assembly fabrication by response surface method
295
Optimization of hot process parameters of Ti–6.7Al–2Sn–2.2Zr–2.1Mo–1W–0.2Si alloy with lamellar starting microstructure based on the processing map
296
Optimization of hot water extraction for sapodilla juice using response surface methodology Original Research Article
297
Optimization of hot water extraction of roselle juice using response surface methodology: a comparative study with other extraction methods
298
Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map
299
Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr–1Mo (P91) steel employing dynamic materials model
300
Optimization of hot-compressed water pretreatment of bagasse and characterization of extracted hemicelluloses
301
Optimization of hot-wire thermal flow sensor based on a neural net model
302
Optimization of HPLC conditions for quantitative analysis of aflatoxins in contaminated peanut
303
Optimization of HPLC method for determination of cefixime using 2-thiophenecarboxaldehyde as derivatizing reagent: A new approach
304
Optimization of HPLC quantification of carotenoids in cooked green vegetables—Comparison of analytical and calculated data
305
Optimization of HPLC quantification of carotenoids in cooked green vegetables—Comparison of analytical and calculated data
306
Optimization of HPMC and carbopol concentrations in non-effervescent floating tablet through factorial design
307
Optimization of HS-SPME conditions for quantification of 2-acetyl-1-pyrroline and study of other volatiles in Pandanus amaryllifolius Roxb.
308
Optimization of human interferon beta protein expression in Chinese hamster ovary cells
309
Optimization of human Peripheral Blood Mononuclear Cells (PBMCs) cryopreservation
310
Optimization of Human Recognition from the Iris Images using the Haar wavelet
311
Optimization of human serum albumin monoliths for chiral separations and high-performance affinity chromatography
312
Optimization of HVAC systems for distributed generation as a function of different types of heat sources and climatic conditions
313
Optimization of hybrid – ground coupled and air source – heat pump systems in combination with thermal storage
314
Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm
315
Optimization of hybrid desalination processes including multi stage flash and reverse osmosis systems Original Research Article
316
Optimization of hybrid ethanol dehydration systems
317
Optimization of hybrid hyperbranched polymer/ceramic filters for the efficient absorption of polyaromatic hydrocarbons from water
318
Optimization of hybrid inoculum development techniques for biohydrogen production and preliminary scale up
319
Optimization of hybrid PVD process of TiAlN coatings by Taguchi method
320
Optimization of hybrid solar energy sources/wind turbine systems integrated to utility grids as microgrid (MG) under pool/bilateral/hybrid electricity market using PSO
321
Optimization of hybrid thermoplastic composite structures using surrogate models and genetic algorithms
322
Optimization of hybridized seawater desalination process
323
Optimization of hydraulic fracture geometry in gas condensate reservoirs
324
Optimization of hydraulically fractured well configuration in anisotropic coal-bed methane reservoirs
325
Optimization of hydride generation atomic fluorescence spectrometry for the determination of trace amounts of germanium: emphasis on acidity and interferences Original Research Article
326
Optimization of hydrocyclone operation using a geno-fuzzy algorithm Original Research Article
327
Optimization of hydrodynamic treatment regime in the processes of sorption–flocculation water purification from organic contaminants
328
Optimization of hydrogen bonds for combined DNA/collagen complex
329
Optimization of hydrogen charging process parameters for an advanced complex hydride reactor concept
330
Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn
331
Optimization of hydrogen distribution systems with pressure constraints
332
Optimization of hydrogen feeding procedure in PEM fuel cell systems for transportation
333
Optimization of hydrogen peroxide in totally chlorine free bleaching of cellulose pulp from olive tree residues
334
Optimization of hydrogen production by Chemical-Looping auto-thermal Reforming working with Ni-based oxygen-carriers
335
Optimization of Hydrogen Production by Ethanol Steam Reforming Using Maximization of H2/CO Ratio with Taguchi Experimental Design Method
336
Optimization of hydrogen production by filtration combustion of methane by oxygen enrichment and depletion
337
Optimization of hydrogen production by filtration combustion of natural gas by water addition
338
Optimization of hydrogen production by hyperthermophilic eubacteria, Thermotoga maritima and Thermotoga neapolitana in batch fermentation
339
Optimization of hydrogen production by Rhodobacter sphaeroides NMBL-01
340
Optimization of hydrogen production in a granule-based UASB reactor
341
Optimization of hydrogen production in in-situ catalytic adsorption (ICA) steam gasification based on Response Surface Methodology
342
Optimization of hydrogen production via coupling of the Fischer–Tropsch synthesis reaction and dehydrogenation of cyclohexane in GTL technology
343
Optimization of hydrogen stations in Florida using the Flow-Refueling Location Model
344
Optimization of hydrogen storage capacity in silica-supported low valent Ti systems exploiting Kubas binding of hydrogen
345
Optimization of hydrogen storage in metal-hydride tanks
346
Optimization of hydrogen storage tubular tanks based on light weight hydrides
347
Optimization of hydrogen vehicle refueling via dynamic simulation
348
Optimization of hydrolysis conditions for the production of glucomanno-oligosaccharides from konjac using β-mannanase by response surface methodology
349
Optimization of hydrolysis conditions of Palmaria palmata to enhance R-phycoerythrin extraction
350
Optimization of hydrolytic and oxidative enzyme methods for ecosystem studies
351
Optimization of hydrolytic and oxidative enzyme methods for ecosystem studies
352
Optimization of hydro-mechanical power split transmissions
353
Optimization of hydrothermal pretreatment of wheat straw for production of bioethanol at low water consumption without addition of chemicals
354
Optimization of hydroxyl radical formation using TiO2 as photocatalyst by response surface methodology
355
Optimization of hyperplanar transition states: Application to 2D test problems Original Research Article
356
Optimization of hysteretic characteristics of damping devices based on pseudoelastic shape memory alloys
357
Optimization of Ibuprofen Delivery through Rat Skin from Traditional and Novel Nanoemulsion Formulations
358
Optimization of IC encapsulation considering fluid/structure interaction using response surface methodology
359
Optimization of ICDsʹʹ Port Sizes in Smart Wells Using Particle Swarm Optimization (PSO) Algorithm through Neural Network Modeling
360
Optimization of ice making in laminar falling films
361
Optimization of ice making period for ice storage system with flake ice maker
362
Optimization of III–V compound semiconductor heterostructures for distributed Bragg reflector applications in VCSELs
363
Optimization of Imaging Parameters in Micro-CT Scanner Based On Signal-To-Noise Ratio for the Analysis of Urinary Stone Composition
364
Optimization of imidazole amide derivatives as cannabinoid-1 receptor antagonists for the treatment of obesity
365
Optimization of immobilization conditions by conventional and statistical strategies for alkaline lipase production by Pseudomonas aeruginosa mutant cells: scale-up at bench-scale bioreactor level
366
Optimization of immobilization conditions of Mucor miehei lipase onto Florisil via polysuccinimide spacer arm using response surface methodology and application of immobilized lipase in asymmetric acylation of 2-amino-1-phenylethanols
367
Optimization of immobilization conditions of Thermomyces lanuginosus lipase on styrene–divinylbenzene copolymer using response surface methodology
368
Optimization of immobilization for selective oxidation of benzyl alcohol by Gluconobacter oxydans using response surface methodology
369
Optimization of immobilized metal ion affinity chromatography for single-step purification of recombinant ovine growth hormone expressed in Escherichia coli
370
Optimization of imperfect preventive maintenance for multi-state systems
371
Optimization of imperfect preventive maintenance for multi-state systems
372
Optimization of imperfection-sensitive symmetric systems for specified maximum load factor Original Research Article
373
Optimization of implicitly defined functions
374
Optimization of Important Factors on the Adsorption of Methyl Violet by Modified Palm Fiber Using Experimental Design Method
375
Optimization of In O transparent conductive films by Ge ion 2 3 implantation
376
Optimization of in situ construction of concrete decks: Flexure tests of compact splices of reinforcement between phases
377
Optimization of in vitro culture conditions influencing the initiation of raspberry (Rubus idaeus L. cv. Nawojka) cell suspension culture
378
Optimization of in vitro culture conditions influencing the initiation of raspberry (Rubus idaeus L. cv. Nawojka) cell suspension culture
379
Optimization of in vitro direct regeneration of multiple shoots in upland cotton (Gossypium hirsutum L.) cv. Iranian varieties
380
Optimization of In Vitro Expansion and Activation of Human Natural Killer Cells against Breast Cancer Cell Line
381
Optimization of In Vitro Micropropagation Protocol for Banana (Musa Sapientum L.) Under Different Hormonal Concentrations and Growth Media
382
Optimization of in vitro Propagation of Purple Passion Fruit (Passiflora edulis), an Important Medicinal and Ornamental Plant
383
Optimization of in vitro Propagation of Qare-Qat (Vaccinium arctostaphylus)
384
Optimization of In vitro Propagation of Qare-Qat (Vaccinium arctostaphylus)
385
Optimization of In vitro Propagation of Qare-Qat (Vaccinium arctostaphylus)
386
Optimization of in vivo X-ray fluorescence analysis methods for bone lead by simulation with the Monte Carlo code CEARXRF
387
Optimization of InAs/GaSb type-II superlattices for high performance of photodetectors
388
Optimization of inclusive fitness
389
Optimization of incubation temperature in embryonated chicken eggs inoculated with H9N2 vaccinal subtype of avian influenza virus
390
Optimization of Independent Parameters for Chickpea Threshing Using Response Surface Method (RSM)
391
Optimization of Indiaʹs power sector strategies using weight-restricted stochastic data envelopment analysis
392
Optimization of indirect immunoassay for aflatoxin B1 detection
393
Optimization of indirect parameters which affect the extractability of volatile aroma compounds from Idiazلbal cheese using analytical supercritical fluid extractions (SFE)
394
Optimization of indoor air temperature set-point for centralized air-conditioned spaces in subtropical climates
395
Optimization of indoor climate conditioning with passive and active methods using GA and CFD
396
Optimization of Indoor Production of Fresh Water Rotifer (Brachionus calyciflorus): A Preliminary Study
397
Optimization of inductively coupled plasma deep etching of GaN and etching damage analysis
398
Optimization of industrial energy systems by incorporating feedback loops into the MIND method
399
Optimization of industrial symbiosis in coffee-based eco-industrial park design
400
Optimization of In-feed Centreless Cylindrical Grinding Process Parameters Using Grey Relational Analysis
401
Optimization of infinite composite plates with quasi-triangular holes under in-plane loading
402
Optimization of influencing factors of nucleic acid adsorption onto silica-coated magnetic particles: Application to viral nucleic acid extraction from serum
403
Optimization of Influential Variables in the Development of Buprenorphine and Bupivacaine Loaded Invasome for Dermal Delivery
404
Optimization of information content in a mass spectrometry based flow-chemistry system by investigating different ionization approaches
405
Optimization of informative spectral regions for the quantification of cholesterol, glucose and urea in control serum solutions using searching combination moving window partial least squares regression method with near infrared spectroscopy
406
Optimization of informed consent for umbilical cord blood banking
407
Optimization of infrared radiation cure process parameters for glass fiber reinforced polymer composites
408
OPTIMIZATION OF INFRASTRUCTURE SYSTEMS MAINTENANCE AND IMPROVEMENT POLICIES
409
OPTIMIZATION OF INFRASTRUCTURE SYSTEMS MAINTENANCE AND IMPROVEMENT POLICIES
410
Optimization of Ingredients for the Manufacture of Sugar-free Konjac Jelly Drinks by Response Surface Methodology
411
Optimization of inhibition conditions of tetrahydrofuran hydrate formation via the fractional factorial design methodology
412
Optimization of Inhibitory Effects of Thymus daenensis Celak. and Zataria multifera Boiss. Essential Oils on Candida albicans Using Response Surface Methodology and Artificial Neural Network
413
Optimization of In-House Indirect-ELISA EITB Assays Employing Cysticercus cellulosae Antigens for Serological Detection and PCR Assays for Molecular Detection of Porcine Cysticercosis
414
Optimization of initial blank shape predicted based on inverse finite element method
415
Optimization of initial blank shape to minimize earing in deep drawing using finite element method
416
Optimization of Initial Conditions for Preferential Crystallization
417
Optimization of initial redox potential in the preparation of expandable graphite by chemical oxidation
418
Optimization of initial redox potential in the preparation of expandable graphite by chemical oxidation
419
Optimization of initial substrate and pH levels for germination of sporing hydrogen-producing anaerobes in cow dung compost
420
Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites
421
Optimization of injection holes in symmetric and asymmetric scroll compressors with vapor injection
422
Optimization of injection mold based on fuzzy moldability evaluation
423
Optimization of Injection Molding and Solvent Debinding Parameters of Stainless Steel Powder (SS316L) Based Feedstock for Metal Injection Molding
424
OPTIMIZATION OF INJECTION MOLDING PARAMETER OF Ti-6Al-4V POWDER MIX WITH PALM STEARIN AND POLYETHYLENE FOR THE HIGHEST GREEN STRENGTH BY USING TAGUCHI METHOD
425
Optimization of Injection Molding Parameters by Data Mining Method in PIM Process
426
Optimization of Injection Molding Parameters for WC-Co Feedstocks
427
Optimization of injection molding process for car fender in consideration of energy efficiency and product quality
428
OPTIMIZATION OF INJECTION MOLDING PROCESS FOR SINK MARKS REDUCTION BY INTEGRATING RESPONSE SURFACE DESIGN METHODOLOGY TAGUCHI APPROACH
429
Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method
430
Optimization of injection molding process parameters using sequential simplex algorithm
431
Optimization of Injection Moulding Process Parameters in the Moulding of High Density Polyethylene (HDPE)
432
Optimization of injection parameters for mechanical properties of specimens with weld line of polypropylene using Taguchi method
433
Optimization of injection scheduling in fractured geothermal reservoirs
434
Optimization of injection strategy to reduce fuel consumption for stoichiometric diesel combustion
435
Optimization of in-line fritless solid-phase extraction for capillary electrophoresis–mass spectrometry
436
Optimization of in-mill ball loading and slurry solids concentration in grinding of UG-2 ores: A statistical experimental design approach
437
Optimization of inner diameter of tubular bamboo charcoal anode for a microbial fuel cell
438
Optimization of input protection diode for high-speed applications ☆
439
Optimization of in-situ monolithic synthesis for immunopreconcentration in capillary
440
Optimization of In-situ Synthesis Process Parameters of LiFePO4/C-MAF-5 Surface Modification for Conductivity Improvement of Lithium-ion Battery Cathode Material by Response Surface Method
441
Optimization of inspection and maintenance decisions for infrastructure facilities under performance model uncertainty: A quasi-Bayes approach
442
Optimization of inspection schedule for a surface-breaking crack subject to fatigue loading
443
Optimization of instant jasmine rice process and its physicochemical properties Original Research Article
444
Optimization of instrumental colour analysis in dry-cured ham
445
Optimization of insulating coating formation technology on the structural materials for heavy liquid metal coolants
446
Optimization of insulation thickness for different glazing areas in buildings for various climatic regions in Turkey
447
Optimization of insulation thickness for external walls using different energy-sources
448
Optimization of Integer Wavelet Transforms Based on Difference Correlation Structures
449
Optimization of Integrated Management to use Surface Water and Groundwater Resources by Using Imperialist Competitive Algorithm and Genetic Algorithm (Tehran Plain)
450
Optimization of integrated photovoltaic–wind power generation systems with battery storage
451
Optimization of Integrated Urban Wet-Weather Control Strategies
452
Optimization of integration limit in the charge comparison method based on signal shape function
453
Optimization of integration limit in the charge comparison method based on signal shape function
454
Optimization of interactions in crystal packing revealed by crystal structures [ethyl 2-(formylamino)-3-thien-2-yl-2- (thien-2-ylmethyl)propanoate and ethyl 3-(5-bromothien-2-yl)- 2-[(5-bromothien-2-yl)methyl]-2-(formylamino)propanoate]
455
Optimization of interatomic potential for Si/SiO2 system based on force matching
456
Optimization of intercooling compression in CO2 capture systems
457
Optimization of interdigital micromixers via analytical modeling—exemplified with the SuperFocus mixer
458
Optimization of Inter-Domain Presence Traffic Based on Privacy Rule Sharing: Performance and Impact on the IMS
459
Optimization of interface structures in crystalline silicon heterojunction solar cells
460
Optimization of interleukin-21 immunotherapeutic strategies
461
Optimization of internal conditions for biocatalytic dye color removal and a comparison of redox mediatorʹs efficiency on partially purified Trichosanthes dioica peroxidase
462
Optimization of internal heat exchangers for hydrogen storage tanks utilizing metal hydrides
463
Optimization of Internal Mixing Parameter on the Electrical Conductivity of Multiwall Carbon Nanotubes/Synthetic Graphite/Epoxy Nanocomposites for Conductive Polymer Composites Using Taguchi Method
464
Optimization of interpolation method for nitrate pollution in groundwater and assessing vulnerability with IPNOA and IPNOC method in Qazvin plain
465
Optimization of interval type-2 fuzzy logic controllers for a perturbed autonomous wheeled mobile robot using genetic algorithms
466
Optimization of intracavity Q-switched laser frequency doubling
467
Optimization of intracellular microcystin extraction for their subsequent analysis by high-performance liquid chromatography
468
Optimization of in-tube enhancement for large evaporators and condensers
469
Optimization of inulin and polydextrose mixtures as sucrose replacers during sugar-free chocolate manufacture – Rheological, microstructure and physical quality characteristics Original Research Article
470
Optimization of Inulinase Production by a Fungal Species Isolated from Rotten Garlic Samples
471
Optimization of inulinase production by a newly isolated Aspergillus tubingensis CR16 using low cost substrates
472
Optimization of inulinase production by solid-state fermentation using sugarcane bagasse as substrate
473
Optimization of inulinase production from low cost substrates using Plackett–Burman and Taguchi methods
474
Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming
475
Optimization of inverse treatment planning using a fuzzy weight function
476
Optimization of invertase immobilization by adsorption in ionic exchange resin for sucrose hydrolysis
477
Optimization of inverted tandem organic solar cells
478
Optimization of In-vitro Permeation Pattern of Ketorolac Tromethamine Transdermal Patches
479
Optimization of InxGa1−xP/In0.2Ga0.8As/GaAs high electron mobility transistor structures grown by solid source molecular beam epitaxy
480
Optimization of Ion Energy for the Treatment of Cancerous Tumors
481
Optimization of ion-exchange displacement separations: I. Validation of an iterative scheme and its use as a methods development tool
482
Optimization of ion-exchange displacement separations: II. Comparison of displacement separations on various ion-exchange resins
483
Optimization of Ion-Exchange Protein Separations Using a Vector Quantizing Neural Network
484
Optimization of ionic liquid based ultrasonic assisted extraction of puerarin from Radix Puerariae Lobatae by response surface methodology
485
Optimization of Ionic Polymer Metal Composite Fabrication via Chemical Electroless Plating Method; Actuation Application Study
486
Optimization of ion-paired lipase for non-aqueous media: acylation of doxorubicin based on surface models of fatty acid esterification
487
Optimization of Iran’s Production in Forouzan Common Oil Filed based on Game Theory
488
Optimization of Iron Oxide Nanoparticle Preparation for Biomedical Applications by Using Box-Behenken Design
489
Optimization of iron speciation (soluble, ferrous and ferric) in beans, chickpeas and lentils
490
Optimization of irreversible solar assisted ejector-vapor compression cascaded systems
491
Optimization of irrigation water distribution networks, layout included
492
Optimization of irrigation water use in grapevines using the relationship between transpiration and plant water status
493
Optimization of Irrigation with Photovoltaic Pumping System
494
Optimization of isoamyl acetate production by using immobilized lipase from Mucor miehei by response surface methodology
495
Optimization of isochromanone based urotensin II receptor agonists Original Research Article
496
Optimization of isocratic supercritical fluid chromatography for enantiomer separation
497
OPTIMIZATION OF ISOLATION FLAXSEED MUCILAGE FROM METHANOLIC EXTRACT AND ITS FUNCTIONAL CHARACTERISTICS
498
Optimization of isolation of cellulose from orange peel using sodium hydroxide and chelating agents
499
Optimization of isotope-labeling conditions for lambertellin based on isotope patterns observed by mass spectrometry
500
Optimization of ITER Central Solenoid Insert design
501
Optimization of jaw muscle activity and fine motor control during repeated biting tasks
502
Optimization of Jet-A fuel reforming for aerospace applications
503
Optimization of JK Flip Flop Layout with Minimal Average Power of Consumption based on ACOR, Fuzzy-ACOR, GA, and Fuzzy-GA
504
Optimization of JK2LB chemical composition for ITER Central Solenoid conduit material Original Research Article
505
Optimization of job shop scheduling problems using modified clonal selection algorithm
506
optimization of justice institutions in cancellation of sharia arbitration decisions
507
Optimization of kanban-based manufacturing systems
508
Optimization of Keratinase Production for Feather Degradation by Bacillus subtilis
509
Optimization of Kerosene Aromatization over Ni/HY Catalysts Using Response Surface Methodology
510
Optimization of key factors affecting hydrogen production from food waste by anaerobic mixed cultures
511
Optimization of Key Factors in Serum Free Medium for Production of Human Recombinant GM-CSF Using Response Surface Methodology
512
Optimization of key parameters for effective vanadium substitution into cubic SBA-16 in the presence of co-surfactant at low acidity: Application in the selective oxidation of ethylbenzene
513
Optimization of key parameters in the proton exchange membrane fuel cell
514
Optimization of key process variables for enhanced hydrogen production by Enterobacter aerogenes using statistical methods
515
Optimization of key variables for the enhanced production of hydrogen by Ethanoligenens harbinense W1 using response surface methodology
516
Optimization of KFCM Clustering of Hyperspectral Data by Particle Swarm Optimization Algorithm
517
Optimization of Kinetic Model for High Rate Algal Pond Design
518
Optimization of kinetic parameters. Multipurpose KINAGDC(MW) non-linear regression program
519
Optimization of K–Ni/image-Al2O3 catalyst for high-pressure oxidative reforming of methane by radial basis function network and multivariate analysis Original Research Article
520
Optimization of Korean crop storage insulation systems
521
Optimization of krypton yields for rp-process studies at ISOLDE(CERN) Original Research Article
522
Optimization of La0.6Sr0.4CoO3-Ce0.8Gd0.2O1.9 composite cathodes for ITSOFCs
523
Optimization of La1−xSrxCoO3−δ perovskite cathodes for intermediate temperature solid oxide fuel cells through the analysis of crystal structure and electrical properties
524
Optimization of Laccase Adsorption-Desorption Behaviors on Multi-Walled Carbon Nanotubes for Enzymatic Biocathodes
525
Optimization of laccase production and its application in delignification of biomass
526
Optimization of laccase–mediator system in producing biobleached flax pulp
527
Optimization of La-Ce/HZSM-5 catalyst for thermal catalytic cracking of naphtha to light olefins to save energy and reduce CO2 emission
528
Optimization of lactic acid bacteria viability using fuzzy soft set modelling
529
Optimization of lactose utilization in deproteinated whey by Kluyveromyces marxianus using response surface methodology (RSM)
530
Optimization of lactulose synthesis from whey lactose by immobilized β-galactosidase and glucose isomerase Original Research Article
531
Optimization of laminar pipe flow using nanoparticle liquid suspensions for cooling applications
532
Optimization of laminate stacking sequence for failure load maximization using Tabu search
533
Optimization of laminated composites subject to uncertain buckling loads
534
Optimization of land use structure and spatial pattern for the semi-arid loess hilly–gully region in China
535
Optimization of landslide conditioning factors using very high-resolution airborne laser scanning (LiDAR) data at catchment scale
536
Optimization of large homogeneous air Cherenkov arrays and application to the design of a 1–100 TeV γ-ray observatory
537
Optimization of large scale bio-methane generation integrating “spilled” hydraulic energy and pressurized oxygen blown biomass gasification
538
Optimization of large simulations using statistical software
539
Optimization of large volume injection-programmable temperature vaporization-gas chromatography–mass spectrometry analysis for the determination of estrogenic compounds in environmental samples
540
Optimization of Large-Scale Hydropower System Operations
541
OPTIMIZATION OF LARGE-SCALE TRUSS STRUCTURES USING
542
Optimization of large-scale truss structures using sparse SAND formulations
543
Optimization of Laser Forming Parameters Using Genetic Algorithms
544
Optimization of laser marking with the help of simulation models
545
Optimization of laser parameters for polarizing protons in naphthalene crystals
546
Optimization of laser parameters for polarizing protons in naphthalene crystals
547
Optimization of laser patterning of textured gallium-doped zinc oxide for amorphous silicon photovoltaics
548
Optimization of laser welding process parameters for super austenitic stainless steel using artificial neural networks and genetic algorithm
549
Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts
550
Optimization of laser-induced breakdown spectroscopy for rapid geochemical analysis
551
Optimization of laser-induced forward transfer process of metal thin films
552
Optimization of lattice QCD codes for the AMD Opteron processor
553
Optimization of lattice QCD codes for the AMD Opteron processor
554
Optimization of lattice quadrupole magnets for cooler ring, S-LSR
555
Optimization of lattice quadrupole magnets for cooler ring, S-LSR
556
Optimization of layered laser crystallization for thin-film crystalline silicon solar cells
557
Optimization of layout and shape of stiffeners in 2D structures
558
Optimization of LC method for the determination of testosterone and epitestosterone in urine samples in view of biomedical studies and anti-doping research studies
559
Optimization of LC–MS/MS using triple quadrupole mass analyzer for the simultaneous analysis of carbosulfan and its main metabolites in oranges Original Research Article
560
Optimization of LDPC-Coded Turbo CDMA Systems
561
Optimization of leaching parameters for the extraction of rare earth metal using decision making method
562
Optimization of lead adsorption of mordenite by response surface methodology: characterization and modification
563
Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells
564
Optimization of lead metastable production in a low pressure argon discharge
565
Optimization of Lead-Selective Membrane Electrode Using Central Composite Experimental Design, and Study of Its Behavior with Electrochemical Impedance Spectroscopy
566
Optimization of Lentiviral Transduction Procedure for the Generation of Human Induced Pluripotent Stem Cells
567
Optimization of lentiviral vectors for the gene therapy of fanconi anemia
568
Optimization of levulinic acid from lignocellulosic biomass using a new hybrid catalyst
569
Optimization of LiFePO4 synthesis by hydrothermal method
570
Optimization of lifetime maintenance strategies for deteriorating structures considering probabilities of violating safety, condition, and cost thresholds
571
Optimization of light collection from crystal scintillators for cryogenic experiments
572
Optimization of light collection from crystal scintillators for cryogenic experiments
573
Optimization of light for growth, photosynthesis, and hydrocarbon production by the colonial microalga Botryococcus braunii BOT-22
574
Optimization of light polarization sensitivity in QWIP detectors
575
Optimization of light use efficiency for biofuel production in algae Original Research Article
576
Optimization of light-surface plasmon coupling by periodicity regulation for a pyramidal probe
577
Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid
578
Optimization of limited network capacity with toll settings
579
Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite)
580
Optimization of linear alkylbenzene sulfonate (LAS) degradation in UASB reactors by varying bioavailability of LAS, hydraulic retention time and specific organic load rate
581
Optimization of linear control systems: analytical methods and computational algorithms[Book Review}
582
Optimization of linear filters under power-spectral-density stabilization
583
OPTIMIZATION OF LINEAR OBJECTIVE FUNCTION SUBJECT TO FUZZY RELATION INEQUALITIES CONSTRAINTS WITH MAX-AVERAGE COMPOSITION
584
Optimization of linear objective function subject to Fuzzy relation inequalities constraints with max-product composition
585
Optimization of linkages for generalized rigid-body guidance synthesis based on finite element models
586
OPTIMIZATION OF LIPASE IMMOBILIZATION
587
Optimization of lipase production by Candida cylindracea in palm oil mill effluent based medium using statistical experimental design
588
Optimization of lipase synthesis by Mucor racemosus - Production in a triple impeller bioreactor
589
Optimization of lipase-catalyzed biodiesel by response surface methodology
590
Optimization of lipase-catalyzed enantioselective esterification of (±)-menthol in ionic liquid
591
Optimization of lipase-catalyzed glucose fatty acid ester synthesis in a two-phase system containing ionic liquids and t-BuOH
592
Optimization of lipase-catalyzed rosin acid starch synthesis by response surface methodology
593
Optimization of lipase-catalyzed synthesis of acetylated EGCG by response surface methodology
594
Optimization of lipase-catalyzed synthesis of diglycerol monooleate by response surface methodology
595
Optimization of lipid nanoparticle formation for beverage applications: Influence of oil type, cosolvents, and cosurfactants on nanoemulsion properties Original Research Article
596
Optimization of Lipofectamine-2000/siRNALipoplexLoaded PLGANanoparticles for Efficient EGFR Gene Silencing: An in Vitro Study
597
Optimization of lipospheres production by factorial design and their performances on a dielectrophoretic lab-on-a-chip platform
598
Optimization of liquid chromatographic method for the separation of nine hydrophilic and hydrophobic components in Salviae miltiorrhizae Radix et Rhizoma (Danshen) using microemulsion as eluent
599
Optimization of liquid chromatographic parameters for the separation of priority phenols by using mixed-level orthogonal array design
600
Optimization of liquid chromatography–multiple reaction monitoring cubed mass spectrometry assay for protein quantification: Application to aquaporin-2 water channel in human urine
601
Optimization of liquid electrostatic coating
602
Optimization of liquid fermentation of microbial consortium WSD-5 followed by saccharification and acidification of wheat straw
603
Optimization of liquid media for lipase production by Candida rugosa
604
Optimization of Liquid Swine Manure Sidedress Rate and Method for Grain Corn
605
Optimization of liquid–liquid phase separation characteristics in the Bunsen section of the sulfur–iodine hydrogen production process
606
Optimization of lithographic masks using genetic algorithms
607
Optimization of living polymerization through distributed control of a nitroxide radical
608
Optimization of LNG Cold Energy Utilization via Power Generation, Refrigeration, and Air Separation
609
Optimization of load balancing using fuzzy Q-Learning for next generation wireless networks
610
Optimization of loading conditions for tube hydroforming
611
Optimization of load-shedding scheme in an integrated process plant
612
Optimization of local control of chaos by an evolutionary algorithm
613
Optimization of local shape and appearance probabilities for segmentation of knee cartilage in 3-D MR images
614
Optimization of locally resonant acoustic metamaterials on underwater sound absorption characteristics
615
Optimization of location and size of opening in a pressure vessel cylinder using ANSYS
616
Optimization of Location and Stiffness of an Intermediate Support to Maximize the First Natural Frequency of a Beam with Tip Mass-With Application
617
Optimization of location-routing-inventory problem for perishable products with WOA and ALO algorithms
618
Optimization of logical rings for multi-hop transmissions in WDM optical star networks
619
Optimization of logistic systems using fuzzy weighted aggregation
620
Optimization of long-term storage stability of Jatropha curcas biodiesel using antioxidants by means of response surface methodology
621
Optimization of loss in orthogonal bend waveguide: Genetic Algorithm simulation
622
Optimization of low activity spectrometric gamma–gamma probes for ash determination in coal stockpiles
623
Optimization of Low Phosphorus Steel Production With Double Slag Process in BOF Original Research Article
624
Optimization of low pressure vortex tube via different axial angles of injection nozzles
625
Optimization of low temperature solar thermal electric generation with Organic Rankine Cycle in different areas
626
Optimization of low-cholesterol–low-fat mayonnaise formulation: Effect of using soy milk and some stabilizer by a mixture design approach
627
Optimization of low-cost medium for very high gravity ethanol fermentations by Saccharomyces cerevisiae using statistical experimental designs
628
Optimization of Low-Temperature Exhaust Gas Waste Heat Fueled Organic Rankine Cycle Original Research Article
629
Optimization of Low-Temperature Lipase Production Conditions and Study on Enzymatic Properties of Aspergillus Niger
630
Optimization of Low-Thrust Trajectories Using an Indirect Shooting Method without Guesses of Initial Costates
631
Optimization of LSO/LuYAP phoswich detector for small animal PET
632
Optimization of LSO/LuYAP phoswich detector for small animal PET
633
Optimization of L-Tryptophan Biosynthesis From L-Serine of Processed Iranian Beet and Cane Molasses and Indole by Induced Escherichia coli ATCC 11303 Cells
634
Optimization of luteolin separation from pigeonpea [Cajanus cajan (L.) Millsp.] leaves by macroporous resins
635
Optimization of Lysozyme – Inulin Conjugation and Investigation on its Functional Properties
636
Optimization of Machinery Use on Farms with Emphasis on Timeliness Costs
637
Optimization of machining conditions for effective turning of E0300 alloy steel
638
Optimization of machining parameters in magnetic force assisted EDM based on Taguchi method
639
Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis
640
Optimization of machining parameters of turning operations based on multi performance criteria
641
Optimization of machining processes using pattern search algorithm
642
Optimization of magnesium hydroxide composite material mixed with expanded graphite and calcium chloride for chemical heat pumps
643
Optimization of magnetic arc oscillation process parameters on mechanical properties of AA 5456 Aluminum alloy weldments
644
Optimization of magnetic calorimeters
645
Optimization of magnetic calorimeters
646
Optimization of magnetic devices using Surface Current Method (SCM)
647
Optimization of magnetic field configuration for the production of Ar ions from RIKEN 18 GHz ECR ion source
648
Optimization of magnetic field configuration for the production of Ar ions from RIKEN 18 GHz ECR ion source
649
Optimization of magneto-electro-elastic composite structures using differential evolution
650
Optimization of magneto-hydrodynamic control of diffuser flows using micro-genetic algorithms and least-squares finite elements
651
Optimization of main parameters affecting activity and octane number produced from catalytic isomerization of n-heptane using response surface methodology
652
Optimization of mainline traffic via an adaptive co-ordinated ramp-metering control model with dynamic OD estimation
653
Optimization of maintenance and spare provisioning policy using simulation
654
Optimization of maintenance in supply chain process and risk-based critical failure situations (case study: Iranian oil pipeline and telecommunication company, north district)
655
Optimization of maintenance policy using the proportional hazard model
656
Optimization of maintenance policy using the proportional hazard model
657
Optimization of majority protocol for controlling transactions concurrency in distributed databases by multi-agent systems
658
OPTIMIZATION OF MANDREL LENGTH FOR BLANK PIERCING IN SCREW ROLLING MILLS
659
Optimization of Manganese Removal from Water Using Response Surface Methodology
660
Optimization of manipulator drive mechanisms of hydraulic excavators on the basis of the tribological criterion
661
Optimization of manpower allocation by considering customer relationship management criteria and uncertainty conditions in car dealerships
662
Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology
663
Optimization of manufacturing parameters for a brake lining using Taguchi method
664
Optimization of marine environmental monitoring sites in the Yangtze River estuary and its adjacent sea, China
665
Optimization of markers in clothing industry
666
Optimization of mass concrete construction using genetic algorithms
667
Optimization of mass-produced trans-tibial prosthesis made of pultruded fiber reinforced plastic
668
Optimization of mass-produced trans-tibial prosthesis made of pultruded fiber reinforced plastic
669
Optimization of material and production to develop fluoroelastomer inflatable seals for sodium cooled fast breeder reactor
670
Optimization of material characteristics of macro-defect free cement
671
Optimization of material composition of FGM hollow circular cylinder under thermal loading: a neural network approach
672
Optimization of material composition of nonhomogeneous hollow sphere for thermal stress relaxation making use of neural network Original Research Article
673
Optimization of material hoisting operations and storage locations in multi-storey building construction by mixed-integer programming
674
Optimization of material parameters for development of polyetherimide composites
675
Optimization of material parameters in 1.3-(mu)m InGaAsN-GaAs lasers
676
Optimization of material processing profiles
677
Optimization of material properties needed for material design of components made of multi-heterogeneous materials
678
Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation
679
OPTIMIZATION OF MATERIAL REMOVAL RATE, SURFACE ROUGHNESS AND TOOL LIFE ON CONVENTIONAL DRY TURNING OF FCD700
680
Optimization of material selection for evaporative desalination plants in order to achieve the highest cost-benefit ratio
681
Optimization of Material to Improve the Performance Heat Transfer in Air Condition Condenser
682
Optimization of matrix solid phase dispersion coupled with gas chromatography electron capture detection for determination of chlorinated pesticides in soil
683
Optimization of matrix solid-phase dispersion extraction method for the analysis of isoflavones in Trifolium pratense
684
Optimization of matrix solid-phase dispersion for liquid chromatography tandem mass spectrometry analysis of 12 pharmaceuticals in sediments
685
Optimization of matrix solid-phase dispersion for the rapid determination of salicylate and benzophenone-type UV absorbing substances in marketed fish
686
Optimization of Matrix Solid-Phase Dispersion method for simultaneous extraction of aflatoxins and OTA in cereals and its application to commercial samples
687
Optimization of MCSCF excited states using directions of negative curvature
688
Optimization of MDEA concentration in flow of input solvent to the absorption tower and its effect on the performance of other processing facilities of gas treatment unit in Sarakhs refinery
689
Optimization of MDSRRC with Matrix Apriori
690
Optimization of mead production using Response Surface Methodology
691
Optimization of measure parameters for an X- and gamma-ray spectrometry portable system
692
Optimization of measurement of 63Ni in reactor waste samples using 65Ni as a tracer
693
Optimization of measurement parameters in Doppler broadening spectroscopy
694
Optimization of measurements of submicron aerosol spectrum
695
Optimization of mechanical alloying parameters in 12YWT ferritic steel nanocomposite
696
Optimization of mechanical and chemical properties of sulphuric anodized aluminium using statistical experimental methods
697
Optimization of mechanical and thermo-mechanical properties of epoxy and E-glass/epoxy composites using NH2-MWCNTs, acetone solvent and combined dispersion methods
698
Optimization of mechanical characteristics of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites using the neural network approach
699
Optimization of mechanical crimping to assemble tubular components
700
Optimization of mechanical draft counter flow wet-cooling tower using artificial bee colony algorithm
701
Optimization of mechanical draft counter flow wet-cooling towers using a rigorous model
702
Optimization of mechanical properties of a micro alloyed steel
703
Optimization of mechanical properties of a Ni–Mo–Cr alloy by structural modifications induced by changes in heat treatment
704
Optimization of mechanical properties of a Ni–Mo–Cr alloy by structural modifications induced by changes in heat treatment
705
Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans
706
Optimization of mechanical properties of an HSLA-100 steel through control of heat treatment variables
707
Optimization of mechanical properties of an HSLA-100 steel through control of heat treatment variables
708
Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method
709
Optimization of mechanical properties of thermoplastic starch/clay nanocomposites
710
Optimization of mechanical properties of thermoplastic starch/clay nanocomposites
711
Optimization of mechanical properties of Ti–Fe–Sn alloys by controlling heterogeneous eutectic structure
712
Optimization of mechanical property and shape recovery behavior of Ti-(∼49 at.%) Ni alloy using artificial neural network and genetic algorithm
713
Optimization of media and temperature for enhanced antimicrobial production by bacteria associated with Rhabditis sp.
714
Optimization of media composition for hydrogen gas production from hydrolyzed wheat starch by dark fermentation
715
Optimization of media composition for Nattokinase production by Bacillus subtilis using response surface methodology
716
Optimization of media composition for the production of biohydrogen from waste glycerol
717
Optimization of media conditions for the production of ethanol from sweet sorghum juice by immobilized Saccharomyces cerevisiae
718
Optimization of media nutrient composition for increased photofermentative hydrogen production by Synechocystis sp. PCC 6803
719
Optimization of Medical PSA Units for Oxygen Production
720
Optimization of medical waste routing problem: The case of TRB1 region in Turkey
721
Optimization of Mediterranean building design using genetic algorithms
722
Optimization of medium and cultivation conditions for alkaline protease production by the marine yeast Aureobasidium pullulans
723
Optimization of medium and cultivation conditions for pullulan production by a new pullulan-producing yeast strain
724
Optimization of medium and process parameters for the production of inulinase from a newly isolated Kluyveromyces marxianus YS-1
725
Optimization of medium components for hyaluronic acid production by Streptococcus zooepidemicus MTCC 3523 using a statistical approach
726
Optimization of medium components for increased production of C-phycocyanin from Phormidium ceylanicum and its purification by single step process
727
Optimization of Medium Components Using Artificial Neural Networks
728
Optimization of medium components using response surface methodology for production of thermostable amylopullulanase in submerged fermentation by Clostridium thermosulfurogenes SVM17
729
Optimization of medium composition for alkali-stable xylanase production by Aspergillus fischeri Fxn 1 in solid-state fermentation using central composite rotary design
730
Optimization of medium composition for butyric acid production by Clostridium thermobutyricum using response surface methodology
731
Optimization of medium composition for enhanced chitin extraction from Parapenaeus longirostris by Lactobacillus helveticus using response surface methodology
732
Optimization of medium composition for exopolysaccharide production by Phellinus nigricans
733
Optimization of medium composition for keratinase production on feather by Bacillus licheniformis RG1 using statistical methods involving response surface methodology
734
Optimization of medium composition for the production of a probiotic microorganism, Lactobacillus rhamnosus, using response surface methodology
735
Optimization of medium composition for the production of elastase by Bacillus sp. EL31410 with response surface methodology
736
Optimization of medium composition for the production of exopolysaccharides from Phellinus baumii Pilلt in submerged culture and the immuno-stimulating activity of exopolysaccharides
737
Optimization of medium composition for the production of exopolysaccharides from Phellinus baumii Pilلt in submerged culture and the immuno-stimulating activity of exopolysaccharides
738
Optimization of medium compositions favoring butanol and 1,3-propanediol production from glycerol by Clostridium pasteurianum
739
Optimization of medium constituents for the production of citric acid from byproduct glycerol using Doehlert experimental design
740
Optimization of medium for decolorization of Solar golden yellow R direct textile dye by Schizophyllum commune IBL-06
741
Optimization of medium for enhancement of ε-Poly-L-Lysine production by Streptomyces sp. M-Z18 with glycerol as carbon source
742
Optimization of medium for one-step fermentation of inulin extract from Jerusalem artichoke tubers using Paenibacillus polymyxa ZJ-9 to produce R,R-2,3-butanediol
743
Optimization of medium for pullulan production using a novel strain of Auerobasidium pullulans isolated from sea mud through response surface methodology
744
Optimization of membrane area and catalyst distribution in a permeative-stage membrane reactor for methane steam reforming
745
Optimization of membrane batch processes by means of the critical flux theory Original Research Article
746
Optimization of membrane bioreactor performances during enzymatic oxidation of waste bio-polyphenols Original Research Article
747
Optimization of membrane bioreactors by the addition of powdered activated carbon
748
Optimization of membrane physical and chemical cleaning by a statistically designed approach
749
Optimization of membrane processes in white biotechnology Original Research Article
750
Optimization of membrane stack configuration for efficient hydrogen production in microbial reverse-electrodialysis electrolysis cells coupled with thermolytic solutions
751
Optimization of membrane unit for removing carbon dioxide from natural gas
752
Optimization of Mercury Thin Film Electrodes for Sono-ASV Studies
753
Optimization of Mercury Thin Film Electrodes for Sono-ASV Studies
754
Optimization of mesenchymal stem cell expansion procedures by cell separation and culture conditions modification
755
OPTIMIZATION OF MESHLESS LOCAL PETROV-GALERKIN PARAMETERS USING GENETIC ALGORITHM FOR 3D ELASTO-STATIC PROBLEMS
756
Optimization of mesoporous K/SBA-15 catalyzed transesterification of palm oil using response surface methodology
757
Optimization of Metabolism: The Evolution of Metabolic Pathways Toward Simplicity Through the Game of the Pentose Phosphate Cycle
758
Optimization of metal foils surface finishing using vibration-assisted micro-forging
759
Optimization of metal forming processes
760
Optimization of metal sulphide precipitation in fluidized-bed treatment of acidic wastewater
761
Optimization of methane cold wall chemical vapor deposition for the production of single walled carbon nanotubes and devices Original Research Article
762
Optimization of methane fermentation from effluent of bio-hydrogen fermentation process using response surface methodology
763
Optimization of methanol steam reforming over a Au/CuO–CeO2 catalyst by statistically designed experiments
764
Optimization of methanol synthesis and cyclohexane dehydrogenation in a thermally coupled reactor using differential evolution (DE) method
765
Optimization of methanol synthesis reactor using genetic algorithms
766
Optimization of methylalumoxane based composite polymeric electrolytes for lithium battery applications
767
Optimization of Mg-based fiber optic hydrogen detectors by alloying the catalyst
768
Optimization of MGI in JET using the TOKES code and mitigation of RE damage for the first wall
769
Optimization of MgTiO3–CaTiO3 based LTCC tapes containing B2O3 for use in microwave applications
770
OPTIMIZATION OF MICRO GAS TURBINE BY ECONOMIC, EXERGY and ENVIRONMENT ANALYSIS USING GENETIC, BEE COLONY and SEARCHING ALGORITHMS
771
Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm
772
Optimization of micro heat exchanger: CFD, analytical approach and multi-objective evolutionary algorithms
773
OPTIMIZATION OF MICRO METAL INJECTION MOLDING FOR HIGHEST GREEN STRENGTH BY USING TAGUCHI METHOD
774
Optimization of microalgal productivity using an adaptive, non-linear model based strategy
775
Optimization of Microbial Hydrogen Production from Maize Stalk Using an Isolated Strain
776
Optimization of microbial inactivation of shrimp by dense phase carbon dioxide
777
Optimization of microbiological assay of folic acid and determination of folate content in spinach
778
Optimization of Microcarrier based MDCK SIAT1 Culture System for Influenza Virus Propagation
779
Optimization of microencapsulation of seed oil by response surface methodology
780
Optimization of Microencapsulation Process for Self-Healing Polymeric Material
781
Optimization of microfiltration for seawater suffering from red-tide contamination Original Research Article
782
Optimization of micro-Laser Induced Breakdown Spectroscopy analysis and signal processing
783
Optimization of micro-Laser Induced Breakdown Spectroscopy analysis and signal processing
784
Optimization of microporous palm shell activated carbon production for flue gas desulphurization: Experimental and statistical studies
785
Optimization of microscale vortex generators in a microchannel using advanced response surface method
786
Optimization of microstructure and properties of acceptor-doped barium cerate
787
Optimization of microstructure and properties of in situ formed β-O-sialon–TiN composite
788
Optimization of microstructured hollow fiber design for membrane distillation applications using CFD modeling
789
Optimization of microtitre plate assay for the testing of biofilm formation ability in different Salmonella serotypes
790
Optimization of microvia-technology using excimer laser for build-up layer application in microelectronics
791
Optimization of microwave assisted acid extraction and characterization of pectin from saffron flower waste (Crocus sativus L.)
792
Optimization of microwave assisted extraction (MAE) of pectin from black mulberry (Morus nigra L.) pomace
793
Optimization of microwave assisted extraction of pectin from orange peel
794
Optimization of microwave assisted Maillard reaction to fabricate and evaluate corn fiber gum-chitosan IPN films
795
Optimization of microwave devices using 3-D finite elements and the design sensitivity of the frequency response
796
Optimization of microwave frying of potato slices by using Taguchi technique Original Research Article
797
Optimization of microwave preparation conditions for activated carbon from Albizia lebbeck seed pods for methylene blue dye adsorption
798
Optimization of microwave preparation conditions for activated carbon from Albizia lebbeck seed pods for methylene blue dye adsorption
799
Optimization of microwave pretreatment on wheat straw for ethanol production
800
Optimization of microwave-assisted calcium chloride pretreatment of corn stover
801
Optimization of microwave-assisted extraction and supercritical fluid extraction of carbamate pesticides in soil by experimental design methodology
802
Optimization of microwave-assisted extraction followed by solid phase micro extraction and gas chromatography-mass spectrometry detection for the assay of some semi volatile organic pollutants in sebum
803
Optimization of Microwave-Assisted Extraction of Bioactive Compounds from Veronica Persica Using Response Surface Methodology
804
Optimization of microwave-assisted extraction of cajaninstilbene acid and pinostrobin from pigeonpea leaves followed by RP-HPLC-DAD determination
805
Optimization of microwave-assisted extraction of cajaninstilbene acid and pinostrobin from pigeonpea leaves followed by RP-HPLC-DAD determination
806
Optimization of microwave-assisted extraction of carbohydrates from industrial waste of corn starch production using response surface methodology
807
Optimization of microwave-assisted extraction of cottonseed oil and evaluation of its oxidative stability and physicochemical properties
808
Optimization of microwave-assisted extraction of natural antioxidants from spent espresso coffee grounds by response surface methodology
809
Optimization of microwave-assisted extraction of natural antioxidants from spent espresso coffee grounds by response surface methodology
810
Optimization of microwave-assisted extraction of polyphenols from Myrtus communis L. leaves
811
Optimization of microwave-assisted extraction procedure for zinc and copper determination in food samples by Box-Behnken design
812
Optimization of microwave-assisted extraction procedure for zinc and copper determination in food samples by Box-Behnken design
813
Optimization of microwave-assisted FeCl3 pretreatment conditions of rice straw and utilization of Trichoderma viride and Bacillus pumilus for production of reducing sugars
814
Optimization of microwave-assisted solid-phase oligosaccharides synthesis reaction and analysis of components and structure of synthetic product
815
Optimization of microwave-assisted solvent extraction for volatile organic acids in tobacco and its comparison with conventional extraction methods Original Research Article
816
Optimization of microwave-assisted transesterification of dry algal biomass using response surface methodology
817
Optimization of microwave-convective drying of Oyster mushrooms (Pleurotus ostreatus) using response-surface methodology
818
Optimization of microwave-enhanced methanolysis of algal biomass to biodiesel under temperature controlled conditions
819
Optimization of microwave-induced chemical etching for rapid development of neutron-induced recoil tracks in CR-39 detectors
820
Optimization of microwave-induced chemical etching for rapid development of neutron-induced recoil tracks in CR-39 detectors
821
Optimization of microwave–infrared roasting of hazelnut Original Research Article
822
OPTIMIZATION OF MILK TYPE AND PHYSICAL FACTORS FOR REDUCTION OF ALCOHOL CONTENT IN KEFIR
823
Optimization of milk-clotting enzyme productivity by Penicillium oxalicum
824
Optimization of millimeter wave system in ITER Equatorial EC H&CD Launcher
825
Optimization of milling parameters for the mechanosynthesis of nanocrystalline hydroxyapatite
826
Optimization of milling parameters, processing and characterization of nano-crystalline oxide dispersion strengthened ferritic steel
827
Optimization of mineral carbonation process for CO2 sequestration by lime-rich coal ashes
828
Optimization of Minimum Quantity Lubricant Parameters in Turning for the Minimization of Cutting Zone Temperature
829
Optimization of Minimum Spanning Tree and Traveling Salesman Problems Arising in a University Campus Network
830
Optimization of missions to Mars for robotic and manned spacecraft Original Research Article
831
Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments
832
Optimization of Mixed Conducting Properties of Y2O3–ZrO2–TiO2 and Sc2O3–Y2O3–ZrO2–TiO2 Solid Solutions as Potential SOFC Anode Materials
833
Optimization of Mixed-Integer Non-Linear Electricity Generation Expansion Planning Problem Based on Newly Improved Gravitational Search Algorithm
834
Optimization of Mixed-Integer Non-Linear Electricity Generation Expansion Planning Problem Based on Newly Improved Gravitational Search Algorithm.
835
Optimization of mixed-mode and indirect-mode natural convection solar dryers
836
Optimization of mixed-skill multi-line operator allocation problem
837
Optimization of mixing parameters through a water model for metal matrix composites synthesis
838
Optimization of Mobile Base Station Placement to Reduce Energy Consumption in Multi-hop Wireless Sensor Network
839
Optimization of Mobile Phase of High Performance Liquid Chromatography Using Full Factorial Design for Simultaneous Estimation of Thiocolchicoside and Dexketoprofen Trometamol in Tablets
840
Optimization of modified carbon paste electrode with multiwalled carbon nanotube/ionic liquid/cauliflower-like gold nanostructures for simultaneous determination of ascorbic acid, dopamine and uric acid
841
Optimization of Modified Fenton (FeGAC/H2O2) Pretreatment of Antibiotics
842
Optimization of modular granular neural networks using hierarchical genetic algorithms for human recognition using the ear biometric measure
843
Optimization of modular granular neural networks using hierarchical genetic algorithms for human recognition using the ear biometric measure
844
Optimization of modular structures using Particle Swarm Optimization
845
Optimization of module, shaft diameter and rolling bearing for spur gear through genetic algorithm
846
Optimization of molding sand composition for quality improvement of iron castings
847
Optimization of molecular cavities in the PCM of neutral molecules using charge dependent atomic radii: applications to the semi-empirical AM1 and MNDO/PM3 methods
848
Optimization of molecular hydrogen production by Rhodobacter sphaeroides O.U.001 in the annular photobioreactor using response surface methodology
849
Optimization of Molecular Sex Identification in Ostrich Based on Multiplex PCR
850
Optimization of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine hybrid system for distributed power generation
851
Optimization of Monacolin Production in a Controlled System
852
Optimization of Monascus Pigment Production on Date Waste Substrates Using Solid State Fermentation
853
Optimization of mono- and anti-symmetrical I-sections of cold-formed thin-walled beams
854
Optimization of monoclonal antibody purification by ion-exchange chromatography: Application of simple methods with linear gradient elution experimental data
855
Optimization of monolithic charged-particle sensor arrays
856
Optimization of monolithic charged-particle sensor arrays
857
Optimization of monolithic enzymatic membranes activity as a function of their composition using design of experiments (DOE) Original Research Article
858
Optimization of monomethoxy poly(ethylene glycol) grafting on Langerhans islets capsule using response surface method
859
Optimization of monosaccharide recovery by post-hydrolysis of the water-soluble hemicellulose component after steam explosion of softwood chips
860
Optimization of morphology and geometry of encapsulated Hypophthalmichthys molitrix oil
861
OPTIMIZATION OF MOTOR VEHICLE INDUSTRIES WASTEWATER TREATMENT METHODS WITH THE AIM OF HEAVY METALS REMOVAL AND WATER REUSE IN PILOT SCALE
862
Optimization of Moving Wingin Ground Effect using Response Surface Method
863
Optimization of MOX enrichment distributions in typical LWR assemblies using a simplex method-based algorithm
864
Optimization of MPEG-2 SNR scaleable codecs
865
Optimization of MR diffusion-weighted imaging acquisitions for pancreatic cancer at 3.0 T
866
Optimization of MRS media components using response surface methodology for the riboflavin production by Lactobacillus fermentum isolated from yoghurt sample
867
Optimization of MTBE synthesis in a fixed-bed reactor system
868
OPTIMIZATION OF MULTI PERIOD - MULTI LOCATION CONSTRUCTION PROJECTS CONSIDERING RESOURCE POOL and BATCH ORDERING
869
Optimization of multicollector isotope-ratio measurement of strontium and neodymium
870
Optimization of multi-echelon repairable item inventory systems with simultaneous location of repair facilities
871
Optimization of Multi-Effect Evaporation desalination plants Original Research Article
872
Optimization of multi-epitopic HIV-1 recombinant protein expression in prokaryote system and conjugation to mouse DEC-205 monoclonal antibody: implication for in-vivo targeted delivery of dendritic cells
873
Optimization of multi-feeder (depot) printed circuit board manufacturing with error guarantees
874
Optimization of multifunction multi-source solar systems by design of experiments
875
Optimization of multilaminated structures using higher-order deformation models Original Research Article
876
Optimization of multilayer fuel assemblies for supercritical water-cooled reactors with mixed neutron spectrum
877
Optimization of Multilayered Composite Structures with Randomly Distributed Mechanical Properties
878
Optimization of multi-layered metallic shield
879
Optimization of multimodal continuous functions using a new crossover for the real-coded genetic algorithms
880
Optimization of multi-pass face-milling via harmony search algorithm
881
Optimization of Multi-period Three-echelon Citrus Supply Chain Problem
882
Optimization of multiple edge barriers with genetic algorithms coupled with a Nelder–Mead local search
883
Optimization of multiple input–output fuzzy membership functions using clonal selection algorithm
884
Optimization of multiple objective gate assignments
885
Optimization of multiple performance characteristics in turning using Taguchi’s quality loss function: An experimental investigation
886
Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function
887
Optimization of multiple quality responses involving qualitative and quantitative characteristics in IC manufacturing using neural networks
888
Optimization of multiple reaction monitoring mode for the trace analysis of veterinary sulfonamides by LC–MS/MS
889
Optimization of Multiple Reservoir Networks for Sedimentation Control
890
Optimization of Multiple Reservoir Networks for Sedimentation Control
891
Optimization of multiple responses considering both location and dispersion effects
892
Optimization of Multiple Responses of Ultrasonic Machining (USM) Process: A Comparative Study
893
Optimization of multiple shoot induction and plant regeneration in Indian barley (Hordeum vulgare) cultivars using mature embryos
894
Optimization of multiple transmission layouts for minimal energy consumption of a battery electric vehicle
895
Optimization of multiple-impulse minimum-time rendezvous with impulse constraints using a hybrid genetic algorithm
896
Optimization of multiple-layer microperforated panels by simulated annealing
897
Optimization of multiplex PCR conditions for rapid detection of Escherichia coli O157:H7 virulence genes
898
Optimization of multiplex RT-PCR for M1, M23, and M23X splice variants of AQP4 and β-actin transcripts in Dalton’s lymphoma mouse tissues
899
Optimization of multi-product, multi-period closed loop supply chain under uncertainty in product return rate: case study in Kalleh dairy company
900
Optimization of multi-response dynamic systems using principal component analysis (PCA)-based utility theory approach
901
Optimization of multi-response problems with continuous functional responses by considering dispersion effects
902
Optimization of multistage flash desalination process by using a two-level factorial design
903
Optimization of Multi-Threshold Circuits
904
Optimization of multivariate analysis for IACT stereoscopic systems
905
Optimization of Municipal Solid Waste Landfill Site Selection by Geospatial Analysis in the Ranya District of Iraq
906
Optimization of municipal solid waste management in Port Said – Egypt
907
Optimization of mutual information for multiresolution image registration
908
Optimization of Nafion content in Nafion–polyaniline nano-composite modified cathodes for PEMFC application
909
Optimization of Nanocrystals NaX Zeolite Synthesis with Different Silica Sources
910
Optimization of nano-emulsions prepared by low-energy emulsification methods at constant temperature using a factorial design study
911
Optimization of nanofluid volumetric receivers for solar thermal energy conversion
912
Optimization of nanostructured lipid carriers for lutein delivery
913
Optimization of nanostructured titania photoanodes for dye-sensitized solar cells: Study and experimentation of TiCl4 treatment
914
Optimization of Naphtha Hydro-Threating Unit with Continuous Resuscitation Due to the Optimum Temperature of Octanizer Unit Reactors
915
Optimization of narirutin extraction during washing step of the pectin production from citrus peels Original Research Article
916
Optimization of native agar extraction from Hydropuntia cornea from Yucatán, México
917
Optimization of Natural Rhenium Irradiation Time to Produce Compositional Radiopharmaceutical
918
Optimization of natural-convection, solar drying systems
919
Optimization of NaY zeolite membrane preparation for the separation of methanol/methyl methacrylate mixtures Original Research Article
920
Optimization of Nd:YAG laser welding onto magnesium alloy via Taguchi analysis
921
Optimization of Nd:YAG laser welding parameters for sealing small titanium tube ends
922
Optimization of Nebhana Reservoir Water Allocation by Stochastic Dynamic Programming
923
Optimization of needle roller bearing design using novel hybrid methods
924
Optimization of neem methyl ester from transesterification process and fuel characterization as a diesel substitute
925
Optimization of network structure to random failures
926
Optimization of neural network for ionic conductivity of nanocomposite solid polymer electrolyte system (PEO–LiPF6–EC–CNT)
927
Optimization of Neural Networks by SIMPLEX Method Performed on Environmental Data
928
Optimization of neural networks: A comparative analysis of the genetic algorithm and simulated annealing
929
Optimization of neutron imaging plate
930
Optimization of neutron imaging plate
931
Optimization of neutron monitor data correction algorithms
932
Optimization of neutron monitor data correction algorithms
933
Optimization of neutron tomography for rapid hydrogen concentration inspection of metal castings
934
Optimization of neutron tomography for rapid hydrogen concentration inspection of metal castings
935
Optimization of n-Hexane Reforming Using Taguchi Orthogonal Array Design
936
Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistry
937
Optimization of nickel adsorption from aqueous solution by using activated carbon prepared from waste apricot by chemical activation
938
OPTIMIZATION OF NICKEL EXTRACTION FROM LATERITIC ORE IN HYDROCHLORIC ACID SOLUTION WITH HYDROGEN PEROXIDE BY TAGUCHI METHOD
939
Optimization of Nickel Removal from Electroless Plating Industry Wastewater using Response Surface Methodology
940
Optimization of Nickel Removal Process From Zinc Sulfate Solution Using Central Composite Design of Experiments
941
Optimization of nickel tetracarbonyl generation and nickel in situ trapping within a transversely heated graphite furnace for atomic absorption spectrometry
942
Optimization of nickel-sulphate patch-test technique with Laser Doppler Perfusion Scanning Technique (LDPST) and visual assessment
943
Optimization of NiMo catalyst for hydrogen production in microbial electrolysis cells
944
Optimization of Nitrate Reduction by Electrocoagulation Using Response Surface Methodology
945
Optimization of nitrate removal from aqueous solutions using clinoptilolite /CoFe2O4 by surface response methodology
946
Optimization of nitric acid-mediated extraction of pectin from cacao pod husks (Theobroma cacao L.) using response surface methodology
947
Optimization of nitrogen and phosphorus removal from meat processing wastewaters using microalgal biofilms
948
Optimization of nitrogen for enhanced citric acid productivity by a 2-deoxy D-glucose resistant culture of Aspergillus niger NGd-280
949
Optimization of nitrogen sources for heterotrophic production of eicosapentaenoic acid by the diatom Nitzschia laevis
950
Optimization of nitrogenated amorphous carbon films deposited by dual ion beam sputtering
951
Optimization of nitrogenated amorphous carbon films deposited by dual ion beam sputtering
952
Optimization of non-aqueous nickel slips for manufacture of MCFC electrodes by tape casting method
953
Optimization of non-evacuated receiver of solar collector having non-uniform temperature distribution for minimum heat loss
954
Optimization of nonlinear error for weighted essentially non-oscillatory methods in direct numerical simulations of compressible turbulence
955
Optimization of non-linear gravity models through generalized simulated annealing
956
Optimization of nonlinear optical rectification coefficient in asymmetric double quantum wells
957
Optimization of Nonlinear Signal Constellations for Real-World MIMO Channels
958
Optimization of non-oxidative carbon-removal techniques by nitrogen-containing plasmas
959
Optimization of Non-Stick Insect Repellent Cream Formulation
960
Optimization of non-symmetric convective–radiative annular fins by differential quadrature method
961
Optimization of non-uniformly distributed multiple tuned mass damper
962
Optimization of Non-volatile Memory Cell and Energy Consumption in Robot Systems by Synthesized Silicon Nanoparticles via Electrical Discharge
963
Optimization of non-woven spacers by CFD and validation by experiments Original Research Article
964
Optimization of normal-phase chromatographic separation of compounds with primary, secondary and tertiary amino groups
965
Optimization of novel combi-molecules: Identification of balanced and mixed bcr-abl/DNA targeting properties
966
Optimization of NOx Emission from Soya Biodiesel Fuelled Diesel Engine using Cetane Improver (DTBP)
967
Optimization of number of collectors for integrated PV/T hybrid active solar still
968
Optimization of Nusselt Number of Al2O3/Water Nanofluid Using Response Surface Methodology
969
Optimization of nutrient component for diesel oil degradation by Acinetobacter beijerinckii ZRS
970
Optimization of nutrient component for diesel oil degradation by Rhodococcus erythropolis
971
Optimization of nutrient feed concentration and addition time for production of poly(β-hydroxybutyrate)
972
Optimization of nutrient medium containing agricultural wastes for xylanase production by Aspergillus niger B03 using optimal composite experimental design
973
Optimization of nutrient-induced germination of Bacillus sporothermodurans spores using response surface methodology Original Research Article
974
Optimization of nutrients for gellan gum production by Sphingomonas paucimobilis ATCC-31461 in molasses based medium using response surface methodology
975
Optimization of nutritional composition and fermentation conditions for cellulase and pectinase production by Aspergillus oryzae using response surface methodology
976
Optimization of nutritional requirements and feeding strategies for clavulanic acid production by Streptomyces clavuligerus
977
Optimization of OCM reactions over NaWMn/SiO2 catalyst at elevated pressure using artificial neural network and response surface methodology
978
Optimization of office building window lighting in Ahvaz
979
Optimization of Oil Palm Fronds Conversion to Levulinic Acid using Fe/HY Zeolite Catalyst
980
Optimization of Oil Palm Fronds Pretreatment Using Ionic Liquid for Levulinic Acid Production
981
Optimization of oil production under gas coning conditions
982
Optimization of oil-containing wastewater treatment processes
983
Optimization of oleic acid esterification catalyzed by ionic liquid for green biodiesel synthesis
984
Optimization of Oleuropein Extraction from Olive Leaves using Artificial Neural Network
985
Optimization of Oleuropein Extraction from Organic Extracts Using a Microfluidic Device and Response Surface Methodology
986
Optimization of olive leaf extract obtained by ultrasound-assisted extraction with response surface methodology
987
Optimization of olive leaf extract obtained by ultrasound-assisted extraction with response surface methodology
988
Optimization of omethoate degradation conditions and a kinetics model
989
Optimization of on-line microwave flow injection analysis system by artificial neural networks for the determination of ruthenium
990
Optimization of on-line microwave flow injection analysis system by artificial neural networks for the determination of ruthenium Original Research Article
991
Optimization of on-line solid phase extraction and HPLC conditions using response surface methodology for determination of WM-5 in mouse plasma and its application to pharmacokinetic study
992
OPTIMIZATION OF OPEN CANAL CROSS SECTIONS BY DIFFERENTIAL EVOLUTION ALGORITHM
993
Optimization of open cross section of the thin-walled beam with flat web and circular flange
994
Optimization of open die forging of round shapes using FEM analysis
995
OPTIMIZATION OF OPENING SIZE FOR CASTELLATED BEAM WITH SINUSOIDAL OPENINGS
996
Optimization of operating conditions for a continuous membrane distillation crystallization process with zero salty water discharge
997
Optimization of Operating Conditions for CO Hydrogenation to Hydrocarbon via Response Surface Method
998
Optimization of operating conditions for compressor performance by means of neural network inverse
999
Optimization of operating conditions for glucose oxidation in an enzymatic membrane bioreactor
1000
Optimization of operating conditions for steam turbine using an artificial neural network inverse
